summaryrefslogtreecommitdiffstats
path: root/Documentation/ABI
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/ABI')
-rw-r--r--Documentation/ABI/testing/dev-kmsg2
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio24
-rw-r--r--Documentation/ABI/testing/sysfs-bus-mdio9
-rw-r--r--Documentation/ABI/testing/sysfs-class-devfreq44
-rw-r--r--Documentation/ABI/testing/sysfs-class-net-batman-adv11
-rw-r--r--Documentation/ABI/testing/sysfs-class-net-grcan35
-rw-r--r--Documentation/ABI/testing/sysfs-class-net-mesh40
-rw-r--r--Documentation/ABI/testing/sysfs-devices-power33
-rw-r--r--Documentation/ABI/testing/sysfs-devices-sun14
-rw-r--r--Documentation/ABI/testing/sysfs-driver-ppi2
-rw-r--r--Documentation/ABI/testing/sysfs-profiling6
-rw-r--r--Documentation/ABI/testing/sysfs-tty112
12 files changed, 293 insertions, 39 deletions
diff --git a/Documentation/ABI/testing/dev-kmsg b/Documentation/ABI/testing/dev-kmsg
index 7e7e07a82e0e..bb820be48179 100644
--- a/Documentation/ABI/testing/dev-kmsg
+++ b/Documentation/ABI/testing/dev-kmsg
@@ -92,7 +92,7 @@ Description: The /dev/kmsg character device node provides userspace access
The flags field carries '-' by default. A 'c' indicates a
fragment of a line. All following fragments are flagged with
'+'. Note, that these hints about continuation lines are not
- neccessarily correct, and the stream could be interleaved with
+ necessarily correct, and the stream could be interleaved with
unrelated messages, but merging the lines in the output
usually produces better human readable results. A similar
logic is used internally when messages are printed to the
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index 2f06d40fe07d..2e33dc6b2346 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -189,6 +189,14 @@ Description:
A computed peak value based on the sum squared magnitude of
the underlying value in the specified directions.
+What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_raw
+What: /sys/bus/iio/devices/iio:deviceX/in_pressure_raw
+KernelVersion: 3.8
+Contact: linux-iio@vger.kernel.org
+Description:
+ Raw pressure measurement from channel Y. Units after
+ application of scale and offset are kilopascal.
+
What: /sys/bus/iio/devices/iio:deviceX/in_accel_offset
What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_offset
What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_offset
@@ -197,6 +205,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_offset
What: /sys/bus/iio/devices/iio:deviceX/in_voltage_offset
What: /sys/bus/iio/devices/iio:deviceX/in_tempY_offset
What: /sys/bus/iio/devices/iio:deviceX/in_temp_offset
+What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_offset
+What: /sys/bus/iio/devices/iio:deviceX/in_pressure_offset
KernelVersion: 2.6.35
Contact: linux-iio@vger.kernel.org
Description:
@@ -226,6 +236,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_magn_scale
What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_scale
What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_scale
What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_scale
+What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_scale
+What: /sys/bus/iio/devices/iio:deviceX/in_pressure_scale
KernelVersion: 2.6.35
Contact: linux-iio@vger.kernel.org
Description:
@@ -245,6 +257,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibbias
What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibbias
What: /sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibbias
What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calibbias
+What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_calibbias
+What: /sys/bus/iio/devices/iio:deviceX/in_pressure_calibbias
KernelVersion: 2.6.35
Contact: linux-iio@vger.kernel.org
Description:
@@ -262,6 +276,8 @@ What /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibscale
What /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibscale
what /sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibscale
what /sys/bus/iio/devices/iio:deviceX/in_proximity0_calibscale
+What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_calibscale
+What: /sys/bus/iio/devices/iio:deviceX/in_pressure_calibscale
KernelVersion: 2.6.35
Contact: linux-iio@vger.kernel.org
Description:
@@ -275,6 +291,8 @@ What: /sys/.../iio:deviceX/in_voltage-voltage_scale_available
What: /sys/.../iio:deviceX/out_voltageX_scale_available
What: /sys/.../iio:deviceX/out_altvoltageX_scale_available
What: /sys/.../iio:deviceX/in_capacitance_scale_available
+What: /sys/.../iio:deviceX/in_pressure_scale_available
+What: /sys/.../iio:deviceX/in_pressureY_scale_available
KernelVersion: 2.6.35
Contact: linux-iio@vger.kernel.org
Description:
@@ -694,6 +712,8 @@ What: /sys/.../buffer/scan_elements/in_voltageY_en
What: /sys/.../buffer/scan_elements/in_voltageY-voltageZ_en
What: /sys/.../buffer/scan_elements/in_incli_x_en
What: /sys/.../buffer/scan_elements/in_incli_y_en
+What: /sys/.../buffer/scan_elements/in_pressureY_en
+What: /sys/.../buffer/scan_elements/in_pressure_en
KernelVersion: 2.6.37
Contact: linux-iio@vger.kernel.org
Description:
@@ -707,6 +727,8 @@ What: /sys/.../buffer/scan_elements/in_voltageY_type
What: /sys/.../buffer/scan_elements/in_voltage_type
What: /sys/.../buffer/scan_elements/in_voltageY_supply_type
What: /sys/.../buffer/scan_elements/in_timestamp_type
+What: /sys/.../buffer/scan_elements/in_pressureY_type
+What: /sys/.../buffer/scan_elements/in_pressure_type
KernelVersion: 2.6.37
Contact: linux-iio@vger.kernel.org
Description:
@@ -751,6 +773,8 @@ What: /sys/.../buffer/scan_elements/in_magn_z_index
What: /sys/.../buffer/scan_elements/in_incli_x_index
What: /sys/.../buffer/scan_elements/in_incli_y_index
What: /sys/.../buffer/scan_elements/in_timestamp_index
+What: /sys/.../buffer/scan_elements/in_pressureY_index
+What: /sys/.../buffer/scan_elements/in_pressure_index
KernelVersion: 2.6.37
Contact: linux-iio@vger.kernel.org
Description:
diff --git a/Documentation/ABI/testing/sysfs-bus-mdio b/Documentation/ABI/testing/sysfs-bus-mdio
new file mode 100644
index 000000000000..6349749ebc29
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-mdio
@@ -0,0 +1,9 @@
+What: /sys/bus/mdio_bus/devices/.../phy_id
+Date: November 2012
+KernelVersion: 3.8
+Contact: netdev@vger.kernel.org
+Description:
+ This attribute contains the 32-bit PHY Identifier as reported
+ by the device during bus enumeration, encoded in hexadecimal.
+ This ID is used to match the device with the appropriate
+ driver.
diff --git a/Documentation/ABI/testing/sysfs-class-devfreq b/Documentation/ABI/testing/sysfs-class-devfreq
index 23d78b5aab11..0ba6ea2f89d9 100644
--- a/Documentation/ABI/testing/sysfs-class-devfreq
+++ b/Documentation/ABI/testing/sysfs-class-devfreq
@@ -11,7 +11,7 @@ What: /sys/class/devfreq/.../governor
Date: September 2011
Contact: MyungJoo Ham <myungjoo.ham@samsung.com>
Description:
- The /sys/class/devfreq/.../governor shows the name of the
+ The /sys/class/devfreq/.../governor show or set the name of the
governor used by the corresponding devfreq object.
What: /sys/class/devfreq/.../cur_freq
@@ -19,15 +19,16 @@ Date: September 2011
Contact: MyungJoo Ham <myungjoo.ham@samsung.com>
Description:
The /sys/class/devfreq/.../cur_freq shows the current
- frequency of the corresponding devfreq object.
+ frequency of the corresponding devfreq object. Same as
+ target_freq when get_cur_freq() is not implemented by
+ devfreq driver.
-What: /sys/class/devfreq/.../central_polling
-Date: September 2011
-Contact: MyungJoo Ham <myungjoo.ham@samsung.com>
+What: /sys/class/devfreq/.../target_freq
+Date: September 2012
+Contact: Rajagopal Venkat <rajagopal.venkat@linaro.org>
Description:
- The /sys/class/devfreq/.../central_polling shows whether
- the devfreq ojbect is using devfreq-provided central
- polling mechanism or not.
+ The /sys/class/devfreq/.../target_freq shows the next governor
+ predicted target frequency of the corresponding devfreq object.
What: /sys/class/devfreq/.../polling_interval
Date: September 2011
@@ -43,6 +44,17 @@ Description:
(/sys/class/devfreq/.../central_polling is 0), this value
may be useless.
+What: /sys/class/devfreq/.../trans_stat
+Date: October 2012
+Contact: MyungJoo Ham <myungjoo.ham@samsung.com>
+Descrtiption:
+ This ABI shows the statistics of devfreq behavior on a
+ specific device. It shows the time spent in each state and
+ the number of transitions between states.
+ In order to activate this ABI, the devfreq target device
+ driver should provide the list of available frequencies
+ with its profile.
+
What: /sys/class/devfreq/.../userspace/set_freq
Date: September 2011
Contact: MyungJoo Ham <myungjoo.ham@samsung.com>
@@ -50,3 +62,19 @@ Description:
The /sys/class/devfreq/.../userspace/set_freq shows and
sets the requested frequency for the devfreq object if
userspace governor is in effect.
+
+What: /sys/class/devfreq/.../available_frequencies
+Date: October 2012
+Contact: Nishanth Menon <nm@ti.com>
+Description:
+ The /sys/class/devfreq/.../available_frequencies shows
+ the available frequencies of the corresponding devfreq object.
+ This is a snapshot of available frequencies and not limited
+ by the min/max frequency restrictions.
+
+What: /sys/class/devfreq/.../available_governors
+Date: October 2012
+Contact: Nishanth Menon <nm@ti.com>
+Description:
+ The /sys/class/devfreq/.../available_governors shows
+ currently available governors in the system.
diff --git a/Documentation/ABI/testing/sysfs-class-net-batman-adv b/Documentation/ABI/testing/sysfs-class-net-batman-adv
index 38dd762def4b..bdc00707c751 100644
--- a/Documentation/ABI/testing/sysfs-class-net-batman-adv
+++ b/Documentation/ABI/testing/sysfs-class-net-batman-adv
@@ -1,4 +1,10 @@
+What: /sys/class/net/<iface>/batman-adv/iface_status
+Date: May 2010
+Contact: Marek Lindner <lindner_marek@yahoo.de>
+Description:
+ Indicates the status of <iface> as it is seen by batman.
+
What: /sys/class/net/<iface>/batman-adv/mesh_iface
Date: May 2010
Contact: Marek Lindner <lindner_marek@yahoo.de>
@@ -7,8 +13,3 @@ Description:
displays the batman mesh interface this <iface>
currently is associated with.
-What: /sys/class/net/<iface>/batman-adv/iface_status
-Date: May 2010
-Contact: Marek Lindner <lindner_marek@yahoo.de>
-Description:
- Indicates the status of <iface> as it is seen by batman.
diff --git a/Documentation/ABI/testing/sysfs-class-net-grcan b/Documentation/ABI/testing/sysfs-class-net-grcan
new file mode 100644
index 000000000000..f418c92ca555
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-net-grcan
@@ -0,0 +1,35 @@
+
+What: /sys/class/net/<iface>/grcan/enable0
+Date: October 2012
+KernelVersion: 3.8
+Contact: Andreas Larsson <andreas@gaisler.com>
+Description:
+ Hardware configuration of physical interface 0. This file reads
+ and writes the "Enable 0" bit of the configuration register.
+ Possible values: 0 or 1. See the GRCAN chapter of the GRLIB IP
+ core library documentation for details. The default value is 0
+ or set by the module parameter grcan.enable0 and can be read at
+ /sys/module/grcan/parameters/enable0.
+
+What: /sys/class/net/<iface>/grcan/enable1
+Date: October 2012
+KernelVersion: 3.8
+Contact: Andreas Larsson <andreas@gaisler.com>
+Description:
+ Hardware configuration of physical interface 1. This file reads
+ and writes the "Enable 1" bit of the configuration register.
+ Possible values: 0 or 1. See the GRCAN chapter of the GRLIB IP
+ core library documentation for details. The default value is 0
+ or set by the module parameter grcan.enable1 and can be read at
+ /sys/module/grcan/parameters/enable1.
+
+What: /sys/class/net/<iface>/grcan/select
+Date: October 2012
+KernelVersion: 3.8
+Contact: Andreas Larsson <andreas@gaisler.com>
+Description:
+ Configuration of which physical interface to be used. Possible
+ values: 0 or 1. See the GRCAN chapter of the GRLIB IP core
+ library documentation for details. The default value is 0 or is
+ set by the module parameter grcan.select and can be read at
+ /sys/module/grcan/parameters/select.
diff --git a/Documentation/ABI/testing/sysfs-class-net-mesh b/Documentation/ABI/testing/sysfs-class-net-mesh
index c81fe89c4c46..bc41da61608d 100644
--- a/Documentation/ABI/testing/sysfs-class-net-mesh
+++ b/Documentation/ABI/testing/sysfs-class-net-mesh
@@ -6,6 +6,14 @@ Description:
Indicates whether the batman protocol messages of the
mesh <mesh_iface> shall be aggregated or not.
+What: /sys/class/net/<mesh_iface>/mesh/ap_isolation
+Date: May 2011
+Contact: Antonio Quartulli <ordex@autistici.org>
+Description:
+ Indicates whether the data traffic going from a
+ wireless client to another wireless client will be
+ silently dropped.
+
What: /sys/class/net/<mesh_iface>/mesh/bonding
Date: June 2010
Contact: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
@@ -31,14 +39,6 @@ Description:
mesh will be fragmented or silently discarded if the
packet size exceeds the outgoing interface MTU.
-What: /sys/class/net/<mesh_iface>/mesh/ap_isolation
-Date: May 2011
-Contact: Antonio Quartulli <ordex@autistici.org>
-Description:
- Indicates whether the data traffic going from a
- wireless client to another wireless client will be
- silently dropped.
-
What: /sys/class/net/<mesh_iface>/mesh/gw_bandwidth
Date: October 2010
Contact: Marek Lindner <lindner_marek@yahoo.de>
@@ -60,6 +60,13 @@ Description:
Defines the selection criteria this node will use
to choose a gateway if gw_mode was set to 'client'.
+What: /sys/class/net/<mesh_iface>/mesh/hop_penalty
+Date: Oct 2010
+Contact: Linus Lüssing <linus.luessing@web.de>
+Description:
+ Defines the penalty which will be applied to an
+ originator message's tq-field on every hop.
+
What: /sys/class/net/<mesh_iface>/mesh/orig_interval
Date: May 2010
Contact: Marek Lindner <lindner_marek@yahoo.de>
@@ -67,19 +74,12 @@ Description:
Defines the interval in milliseconds in which batman
sends its protocol messages.
-What: /sys/class/net/<mesh_iface>/mesh/hop_penalty
-Date: Oct 2010
-Contact: Linus Lüssing <linus.luessing@web.de>
-Description:
- Defines the penalty which will be applied to an
- originator message's tq-field on every hop.
-
-What: /sys/class/net/<mesh_iface>/mesh/routing_algo
-Date: Dec 2011
-Contact: Marek Lindner <lindner_marek@yahoo.de>
+What: /sys/class/net/<mesh_iface>/mesh/routing_algo
+Date: Dec 2011
+Contact: Marek Lindner <lindner_marek@yahoo.de>
Description:
- Defines the routing procotol this mesh instance
- uses to find the optimal paths through the mesh.
+ Defines the routing procotol this mesh instance
+ uses to find the optimal paths through the mesh.
What: /sys/class/net/<mesh_iface>/mesh/vis_mode
Date: May 2010
diff --git a/Documentation/ABI/testing/sysfs-devices-power b/Documentation/ABI/testing/sysfs-devices-power
index 45000f0db4d4..9d43e7670841 100644
--- a/Documentation/ABI/testing/sysfs-devices-power
+++ b/Documentation/ABI/testing/sysfs-devices-power
@@ -164,7 +164,7 @@ Contact: Rafael J. Wysocki <rjw@sisk.pl>
Description:
The /sys/devices/.../wakeup_prevent_sleep_time_ms attribute
contains the total time the device has been preventing
- opportunistic transitions to sleep states from occuring.
+ opportunistic transitions to sleep states from occurring.
This attribute is read-only. If the device is not enabled to
wake up the system from sleep states, this attribute is not
present.
@@ -204,3 +204,34 @@ Description:
This attribute has no effect on system-wide suspend/resume and
hibernation.
+
+What: /sys/devices/.../power/pm_qos_no_power_off
+Date: September 2012
+Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+ The /sys/devices/.../power/pm_qos_no_power_off attribute
+ is used for manipulating the PM QoS "no power off" flag. If
+ set, this flag indicates to the kernel that power should not
+ be removed entirely from the device.
+
+ Not all drivers support this attribute. If it isn't supported,
+ it is not present.
+
+ This attribute has no effect on system-wide suspend/resume and
+ hibernation.
+
+What: /sys/devices/.../power/pm_qos_remote_wakeup
+Date: September 2012
+Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+ The /sys/devices/.../power/pm_qos_remote_wakeup attribute
+ is used for manipulating the PM QoS "remote wakeup required"
+ flag. If set, this flag indicates to the kernel that the
+ device is a source of user events that have to be signaled from
+ its low-power states.
+
+ Not all drivers support this attribute. If it isn't supported,
+ it is not present.
+
+ This attribute has no effect on system-wide suspend/resume and
+ hibernation.
diff --git a/Documentation/ABI/testing/sysfs-devices-sun b/Documentation/ABI/testing/sysfs-devices-sun
new file mode 100644
index 000000000000..86be9848a77e
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-sun
@@ -0,0 +1,14 @@
+Whatt: /sys/devices/.../sun
+Date: October 2012
+Contact: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
+Description:
+ The file contains a Slot-unique ID which provided by the _SUN
+ method in the ACPI namespace. The value is written in Advanced
+ Configuration and Power Interface Specification as follows:
+
+ "The _SUN value is required to be unique among the slots of
+ the same type. It is also recommended that this number match
+ the slot number printed on the physical slot whenever possible."
+
+ So reading the sysfs file, we can identify a physical position
+ of the slot in the system.
diff --git a/Documentation/ABI/testing/sysfs-driver-ppi b/Documentation/ABI/testing/sysfs-driver-ppi
index 97a003ee058b..7d1435bc976c 100644
--- a/Documentation/ABI/testing/sysfs-driver-ppi
+++ b/Documentation/ABI/testing/sysfs-driver-ppi
@@ -5,7 +5,7 @@ Contact: xiaoyan.zhang@intel.com
Description:
This folder includes the attributes related with PPI (Physical
Presence Interface). Only if TPM is supported by BIOS, this
- folder makes sence. The folder path can be got by command
+ folder makes sense. The folder path can be got by command
'find /sys/ -name 'pcrs''. For the detail information of PPI,
please refer to the PPI specification from
http://www.trustedcomputinggroup.org/
diff --git a/Documentation/ABI/testing/sysfs-profiling b/Documentation/ABI/testing/sysfs-profiling
index b02d8b8c173a..8a8e466eb2c0 100644
--- a/Documentation/ABI/testing/sysfs-profiling
+++ b/Documentation/ABI/testing/sysfs-profiling
@@ -1,13 +1,13 @@
-What: /sys/kernel/profile
+What: /sys/kernel/profiling
Date: September 2008
Contact: Dave Hansen <dave@linux.vnet.ibm.com>
Description:
- /sys/kernel/profile is the runtime equivalent
+ /sys/kernel/profiling is the runtime equivalent
of the boot-time profile= option.
You can get the same effect running:
- echo 2 > /sys/kernel/profile
+ echo 2 > /sys/kernel/profiling
as you would by issuing profile=2 on the boot
command line.
diff --git a/Documentation/ABI/testing/sysfs-tty b/Documentation/ABI/testing/sysfs-tty
index 0c430150d929..ad22fb0ee765 100644
--- a/Documentation/ABI/testing/sysfs-tty
+++ b/Documentation/ABI/testing/sysfs-tty
@@ -26,3 +26,115 @@ Description:
UART port in serial_core, that is bound to TTY like ttyS0.
uartclk = 16 * baud_base
+ These sysfs values expose the TIOCGSERIAL interface via
+ sysfs rather than via ioctls.
+
+What: /sys/class/tty/ttyS0/type
+Date: October 2012
+Contact: Alan Cox <alan@linux.intel.com>
+Description:
+ Shows the current tty type for this port.
+
+ These sysfs values expose the TIOCGSERIAL interface via
+ sysfs rather than via ioctls.
+
+What: /sys/class/tty/ttyS0/line
+Date: October 2012
+Contact: Alan Cox <alan@linux.intel.com>
+Description:
+ Shows the current tty line number for this port.
+
+ These sysfs values expose the TIOCGSERIAL interface via
+ sysfs rather than via ioctls.
+
+What: /sys/class/tty/ttyS0/port
+Date: October 2012
+Contact: Alan Cox <alan@linux.intel.com>
+Description:
+ Shows the current tty port I/O address for this port.
+
+ These sysfs values expose the TIOCGSERIAL interface via
+ sysfs rather than via ioctls.
+
+What: /sys/class/tty/ttyS0/irq
+Date: October 2012
+Contact: Alan Cox <alan@linux.intel.com>
+Description:
+ Shows the current primary interrupt for this port.
+
+ These sysfs values expose the TIOCGSERIAL interface via
+ sysfs rather than via ioctls.
+
+What: /sys/class/tty/ttyS0/flags
+Date: October 2012
+Contact: Alan Cox <alan@linux.intel.com>
+Description:
+ Show the tty port status flags for this port.
+
+ These sysfs values expose the TIOCGSERIAL interface via
+ sysfs rather than via ioctls.
+
+What: /sys/class/tty/ttyS0/xmit_fifo_size
+Date: October 2012
+Contact: Alan Cox <alan@linux.intel.com>
+Description:
+ Show the transmit FIFO size for this port.
+
+ These sysfs values expose the TIOCGSERIAL interface via
+ sysfs rather than via ioctls.
+
+What: /sys/class/tty/ttyS0/close_delay
+Date: October 2012
+Contact: Alan Cox <alan@linux.intel.com>
+Description:
+ Show the closing delay time for this port in ms.
+
+ These sysfs values expose the TIOCGSERIAL interface via
+ sysfs rather than via ioctls.
+
+What: /sys/class/tty/ttyS0/closing_wait
+Date: October 2012
+Contact: Alan Cox <alan@linux.intel.com>
+Description:
+ Show the close wait time for this port in ms.
+
+ These sysfs values expose the TIOCGSERIAL interface via
+ sysfs rather than via ioctls.
+
+What: /sys/class/tty/ttyS0/custom_divisor
+Date: October 2012
+Contact: Alan Cox <alan@linux.intel.com>
+Description:
+ Show the custom divisor if any that is set on this port.
+
+ These sysfs values expose the TIOCGSERIAL interface via
+ sysfs rather than via ioctls.
+
+What: /sys/class/tty/ttyS0/io_type
+Date: October 2012
+Contact: Alan Cox <alan@linux.intel.com>
+Description:
+ Show the I/O type that is to be used with the iomem base
+ address.
+
+ These sysfs values expose the TIOCGSERIAL interface via
+ sysfs rather than via ioctls.
+
+What: /sys/class/tty/ttyS0/iomem_base
+Date: October 2012
+Contact: Alan Cox <alan@linux.intel.com>
+Description:
+ The I/O memory base for this port.
+
+ These sysfs values expose the TIOCGSERIAL interface via
+ sysfs rather than via ioctls.
+
+What: /sys/class/tty/ttyS0/iomem_reg_shift
+Date: October 2012
+Contact: Alan Cox <alan@linux.intel.com>
+Description:
+ Show the register shift indicating the spacing to be used
+ for accesses on this iomem address.
+
+ These sysfs values expose the TIOCGSERIAL interface via
+ sysfs rather than via ioctls.
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 01:09:07 +0000