1 files changed, 170 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/example-schema.yaml b/Documentation/devicetree/bindings/example-schema.yaml
new file mode 100644
index 000000000000..9175d67f355d
--- /dev/null
+++ b/Documentation/devicetree/bindings/example-schema.yaml
@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2018 Linaro Ltd.
+%YAML 1.2
+---
+# All the top-level keys are standard json-schema keywords except for
+# 'maintainers' and 'select'
+
+# $id is a unique idenifier based on the filename. There may or may not be a
+# file present at the URL.
+$id: "http://devicetree.org/schemas/example-schema.yaml#"
+# $schema is the meta-schema this schema should be validated with.
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: An example schema annotated with jsonschema details
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+description: |
+  A more detailed multi-line description of the binding.
+
+  Details about the hardware device and any links to datasheets can go here.
+
+  Literal blocks are marked with the '|' at the beginning. The end is marked by
+  indentation less than the first line of the literal block. Lines also cannot
+  begin with a tab character.
+
+select: false
+  # 'select' is a schema applied to a DT node to determine if this binding
+  # schema should be applied to the node. It is optional and by default the
+  # possible compatible strings are extracted and used to match.
+
+  # In this case, a 'false' schema will never match.
+
+properties:
+  # A dictionary of DT properties for this binding schema
+  compatible:
+    # More complicated schema can use oneOf (XOR), anyOf (OR), or allOf (AND)
+    # to handle different conditions.
+    # In this case, it's needed to handle a variable number of values as there
+    # isn't another way to express a constraint of the last string value.
+    # The boolean schema must be a list of schemas.
+    oneOf:
+      - items:
+          # items is a list of possible values for the property. The number of
+          # values is determined by the number of elements in the list.
+          # Order in lists is significant, order in dicts is not
+          # Must be one of the 1st enums followed by the 2nd enum
+          #
+          # Each element in items should be 'enum' or 'const'
+          - enum:
+              - vendor,soc4-ip
+              - vendor,soc3-ip
+              - vendor,soc2-ip
+          - enum:
+              - vendor,soc1-ip
+        # additionalItems being false is implied
+        # minItems/maxItems equal to 2 is implied
+      - items:
+          # 'const' is just a special case of an enum with a single possible value
+          - const: vendor,soc1-ip
+
+  reg:
+    # The core schema already checks that reg values are numbers, so device
+    # specific schema don't need to do those checks.
+    # The description of each element defines the order and implicitly defines
+    # the number of reg entries.
+    items:
+      - description: core registers
+      - description: aux registers
+    # minItems/maxItems equal to 2 is implied
+
+  reg-names:
+    # The core schema enforces this is a string array
+    items:
+      - const: core
+      - const: aux
+
+  clocks:
+    # Cases that have only a single entry just need to express that with maxItems
+    maxItems: 1
+    description: bus clock
+
+  clock-names:
+    items:
+      - const: bus
+
+  interrupts:
+    # Either 1 or 2 interrupts can be present
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: tx or combined interrupt
+      - description: rx interrupt
+    description:
+      A variable number of interrupts warrants a description of what conditions
+      affect the number of interrupts. Otherwise, descriptions on standard
+      properties are not necessary.
+
+  interrupt-names:
+    # minItems must be specified here because the default would be 2
+    minItems: 1
+    maxItems: 2
+    items:
+      - const: tx irq
+      - const: rx irq
+
+  # Property names starting with '#' must be quoted
+  '#interrupt-cells':
+    # A simple case where the value must always be '2'.
+    # The core schema handles that this must be a single integer.
+    const: 2
+
+  interrupt-controller: true
+    # The core checks this is a boolean, so just have to list it here to be
+    # valid for this binding.
+
+  clock-frequency:
+    # The type is set in the core schema. Per device schema only need to set
+    # constraints on the possible values.
+    minimum: 100
+    maximum: 400000
+    # The value that should be used if the property is not present
+    default: 200
+
+  foo-gpios:
+    maxItems: 1
+    description: A connection of the 'foo' gpio line.
+
+  vendor,int-property:
+    description: Vendor specific properties must have a description
+    # 'allOf' is the json-schema way of subclassing a schema. Here the base
+    # type schema is referenced and then additional constraints on the values
+    # are added.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [2, 4, 6, 8, 10]
+
+  vendor,bool-property:
+    description: Vendor specific properties must have a description
+    # boolean properties is one case where the json-schema 'type' keyword
+    # can be used directly
+    type: boolean
+
+  vendor,string-array-property:
+    description: Vendor specific properties should reference a type in the
+      core schema.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/string-array
+      - items:
+          - enum: [ foo, bar ]
+          - enum: [ baz, boo ]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+
+examples:
+  # Examples are now compiled with dtc
+  - |
+    node@1000 {
+          compatible = "vendor,soc4-ip", "vendor,soc1-ip";
+          reg = <0x1000 0x80>,
+                <0x3000 0x80>;
+          reg-names = "core", "aux";
+          interrupts = <10>;
+          interrupt-controller;
+    };