diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
9 files changed, 24 insertions, 20 deletions
diff --git a/Documentation/devicetree/bindings/ata/sata_rcar.txt b/Documentation/devicetree/bindings/ata/sata_rcar.txt index 0764f9ab63dc..e20eac7a3087 100644 --- a/Documentation/devicetree/bindings/ata/sata_rcar.txt +++ b/Documentation/devicetree/bindings/ata/sata_rcar.txt @@ -1,14 +1,22 @@ * Renesas R-Car SATA Required properties: -- compatible : should contain one of the following: +- compatible : should contain one or more of the following: - "renesas,sata-r8a7779" for R-Car H1 - ("renesas,rcar-sata" is deprecated) - "renesas,sata-r8a7790-es1" for R-Car H2 ES1 - "renesas,sata-r8a7790" for R-Car H2 other than ES1 - "renesas,sata-r8a7791" for R-Car M2-W - "renesas,sata-r8a7793" for R-Car M2-N - "renesas,sata-r8a7795" for R-Car H3 + - "renesas,rcar-gen2-sata" for a generic R-Car Gen2 compatible device + - "renesas,rcar-gen3-sata" for a generic R-Car Gen3 compatible device + - "renesas,rcar-sata" is deprecated + + When compatible with the generic version nodes + must list the SoC-specific version corresponding + to the platform first followed by the generic + version. + - reg : address and length of the SATA registers; - interrupts : must consist of one interrupt specifier. - clocks : must contain a reference to the functional clock. @@ -16,7 +24,7 @@ Required properties: Example: sata0: sata@ee300000 { - compatible = "renesas,sata-r8a7791"; + compatible = "renesas,sata-r8a7791", "renesas,rcar-gen2-sata"; reg = <0 0xee300000 0 0x2000>; interrupt-parent = <&gic>; interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt b/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt index f69773f4252b..941bb6a6fb13 100644 --- a/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt +++ b/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt @@ -8,7 +8,6 @@ Required properties: Optional properties: - clocks: Reference to the crypto engine clock. -- dma-mask: The address mask limitation. Defaults to 64. Example: @@ -24,6 +23,5 @@ Example: interrupt-names = "mem", "ring0", "ring1", "ring2", "ring3", "eip"; clocks = <&cpm_syscon0 1 26>; - dma-mask = <0xff 0xffffffff>; status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-exar.txt b/Documentation/devicetree/bindings/gpio/gpio-exar.txt new file mode 100644 index 000000000000..4540d61824af --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-exar.txt @@ -0,0 +1,5 @@ +Exportable MPIO interface of Exar UART chips + +Required properties of the device: + - exar,first-pin: first exportable pins (0..15) + - ngpios: number of exportable pins (1..16) diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt index d3b6e1a4713a..5aa5926029ee 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt +++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt @@ -40,7 +40,7 @@ Optional properties: Example for a Mali-T760: gpu@ffa30000 { - compatible = "rockchip,rk3288-mali", "arm,mali-t760", "arm,mali-midgard"; + compatible = "rockchip,rk3288-mali", "arm,mali-t760"; reg = <0xffa30000 0x10000>; interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt index aad98442788b..a58c173b7ab9 100644 --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt @@ -78,7 +78,6 @@ Example: }; dwmmc0@12200000 { - num-slots = <1>; cap-mmc-highspeed; cap-sd-highspeed; broken-cd; diff --git a/Documentation/devicetree/bindings/mmc/img-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/img-dw-mshc.txt index 85de99fcaa2f..c54e577eea07 100644 --- a/Documentation/devicetree/bindings/mmc/img-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/img-dw-mshc.txt @@ -24,6 +24,5 @@ Example: fifo-depth = <0x20>; bus-width = <4>; - num-slots = <1>; disable-wp; }; diff --git a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt index 8af1afcb86dc..07242d141773 100644 --- a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt @@ -36,7 +36,6 @@ Example: /* Board portion */ dwmmc0@fcd03000 { - num-slots = <1>; vmmc-supply = <&ldo12>; fifo-depth = <0x100>; pinctrl-names = "default"; @@ -52,7 +51,6 @@ Example: dwmmc_1: dwmmc1@f723e000 { compatible = "hisilicon,hi6220-dw-mshc"; - num-slots = <0x1>; bus-width = <0x4>; disable-wp; cap-sd-highspeed; diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt index 9cb55ca57461..ef3e5f14067a 100644 --- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt @@ -12,12 +12,12 @@ Required Properties: * #address-cells: should be 1. * #size-cells: should be 0. -# Slots: The slot specific information are contained within child-nodes with - each child-node representing a supported slot. There should be atleast one - child node representing a card slot. The name of the child node representing - the slot is recommended to be slot@n where n is the unique number of the slot - connected to the controller. The following are optional properties which - can be included in the slot child node. +# Slots (DEPRECATED): The slot specific information are contained within + child-nodes with each child-node representing a supported slot. There should + be atleast one child node representing a card slot. The name of the child node + representing the slot is recommended to be slot@n where n is the unique number + of the slot connected to the controller. The following are optional properties + which can be included in the slot child node. * reg: specifies the physical slot number. The valid values of this property is 0 to (num-slots -1), where num-slots is the value @@ -63,7 +63,7 @@ Optional properties: clock(cclk_out). If it's not specified, max is 200MHZ and min is 400KHz by default. (Use the "max-frequency" instead of "clock-freq-min-max".) -* num-slots: specifies the number of slots supported by the controller. +* num-slots (DEPRECATED): specifies the number of slots supported by the controller. The number of physical slots actually used could be equal or less than the value specified by num-slots. If this property is not specified, the value of num-slot property is assumed to be 1. @@ -124,7 +124,6 @@ board specific portions as listed below. dwmmc0@12200000 { clock-frequency = <400000000>; clock-freq-min-max = <400000 200000000>; - num-slots = <1>; broken-cd; fifo-depth = <0x80>; card-detect-delay = <200>; @@ -139,7 +138,6 @@ board specific portions as listed below. dwmmc0@12200000 { clock-frequency = <400000000>; clock-freq-min-max = <400000 200000000>; - num-slots = <1>; broken-cd; fifo-depth = <0x80>; card-detect-delay = <200>; diff --git a/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt index eaade0e5adeb..906819a90c2b 100644 --- a/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt @@ -25,7 +25,6 @@ Example: clock-frequency = <50000000>; clocks = <&topcrm SD0_AHB>, <&topcrm SD0_WCLK>; clock-names = "biu", "ciu"; - num-slots = <1>; max-frequency = <50000000>; cap-sdio-irq; cap-sd-highspeed; |