diff options
Diffstat (limited to 'Documentation/devicetree')
3 files changed, 54 insertions, 4 deletions
diff --git a/Documentation/devicetree/bindings/watchdog/cortina,gemin-watchdog.txt b/Documentation/devicetree/bindings/watchdog/cortina,gemin-watchdog.txt new file mode 100644 index 000000000000..bc4b865d178b --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/cortina,gemin-watchdog.txt @@ -0,0 +1,17 @@ +Cortina Systems Gemini SoC Watchdog + +Required properties: +- compatible : must be "cortina,gemini-watchdog" +- reg : shall contain base register location and length +- interrupts : shall contain the interrupt for the watchdog + +Optional properties: +- timeout-sec : the default watchdog timeout in seconds. + +Example: + +watchdog@41000000 { + compatible = "cortina,gemini-watchdog"; + reg = <0x41000000 0x1000>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; +}; diff --git a/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt b/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt index 8f3d96af81d7..1f6e101e299a 100644 --- a/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt @@ -6,10 +6,11 @@ occurred. Required properties: - compatible : should be one among the following - (a) "samsung,s3c2410-wdt" for Exynos4 and previous SoCs - (b) "samsung,exynos5250-wdt" for Exynos5250 - (c) "samsung,exynos5420-wdt" for Exynos5420 - (c) "samsung,exynos7-wdt" for Exynos7 + - "samsung,s3c2410-wdt" for S3C2410 + - "samsung,s3c6410-wdt" for S3C6410, S5PV210 and Exynos4 + - "samsung,exynos5250-wdt" for Exynos5250 + - "samsung,exynos5420-wdt" for Exynos5420 + - "samsung,exynos7-wdt" for Exynos7 - reg : base physical address of the controller and length of memory mapped region. diff --git a/Documentation/devicetree/bindings/watchdog/zte,zx2967-wdt.txt b/Documentation/devicetree/bindings/watchdog/zte,zx2967-wdt.txt new file mode 100644 index 000000000000..06ce67766756 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/zte,zx2967-wdt.txt @@ -0,0 +1,32 @@ +ZTE zx2967 Watchdog timer + +Required properties: + +- compatible : should be one of the following. + * zte,zx296718-wdt +- reg : Specifies base physical address and size of the registers. +- clocks : Pairs of phandle and specifier referencing the controller's clocks. +- resets : Reference to the reset controller controlling the watchdog + controller. + +Optional properties: + +- timeout-sec : Contains the watchdog timeout in seconds. +- zte,wdt-reset-sysctrl : Directs how to reset system by the watchdog. + if we don't want to restart system when watchdog been triggered, + it's not required, vice versa. + It should include following fields. + * phandle of aon-sysctrl. + * offset of register that be written, should be 0xb0. + * configure value that be written to aon-sysctrl. + * bit mask, corresponding bits will be affected. + +Example: + +wdt: watchdog@1465000 { + compatible = "zte,zx296718-wdt"; + reg = <0x1465000 0x1000>; + clocks = <&topcrm WDT_WCLK>; + resets = <&toprst 35>; + zte,wdt-reset-sysctrl = <&aon_sysctrl 0xb0 1 0x115>; +}; |