3 files changed, 6 insertions, 109 deletions
diff --git a/Documentation/input/devices/gpio-tilt.rst b/Documentation/input/devices/gpio-tilt.rst
deleted file mode 100644
index fa6e64570aa7..000000000000
--- a/Documentation/input/devices/gpio-tilt.rst
+++ /dev/null
@@ -1,103 +0,0 @@
-Driver for tilt-switches connected via GPIOs
-============================================
-
-Generic driver to read data from tilt switches connected via gpios.
-Orientation can be provided by one or more than one tilt switches,
-i.e. each tilt switch providing one axis, and the number of axes
-is also not limited.
-
-
-Data structures
----------------
-
-The array of struct gpio in the gpios field is used to list the gpios
-that represent the current tilt state.
-
-The array of struct gpio_tilt_axis describes the axes that are reported
-to the input system. The values set therein are used for the
-input_set_abs_params calls needed to init the axes.
-
-The array of struct gpio_tilt_state maps gpio states to the corresponding
-values to report. The gpio state is represented as a bitfield where the
-bit-index corresponds to the index of the gpio in the struct gpio array.
-In the same manner the values stored in the axes array correspond to
-the elements of the gpio_tilt_axis-array.
-
-
-Example
--------
-
-Example configuration for a single TS1003 tilt switch that rotates around
-one axis in 4 steps and emits the current tilt via two GPIOs::
-
-    static int sg060_tilt_enable(struct device *dev) {
-	    /* code to enable the sensors */
-    };
-
-    static void sg060_tilt_disable(struct device *dev) {
-	    /* code to disable the sensors */
-    };
-
-    static struct gpio sg060_tilt_gpios[] = {
-	    { SG060_TILT_GPIO_SENSOR1, GPIOF_IN, "tilt_sensor1" },
-	    { SG060_TILT_GPIO_SENSOR2, GPIOF_IN, "tilt_sensor2" },
-    };
-
-    static struct gpio_tilt_state sg060_tilt_states[] = {
-	    {
-		    .gpios = (0 << 1) | (0 << 0),
-		    .axes = (int[]) {
-			    0,
-		    },
-	    }, {
-		    .gpios = (0 << 1) | (1 << 0),
-		    .axes = (int[]) {
-			    1, /* 90 degrees */
-		    },
-	    }, {
-		    .gpios = (1 << 1) | (1 << 0),
-		    .axes = (int[]) {
-			    2, /* 180 degrees */
-		    },
-	    }, {
-		    .gpios = (1 << 1) | (0 << 0),
-		    .axes = (int[]) {
-			    3, /* 270 degrees */
-		    },
-	    },
-    };
-
-    static struct gpio_tilt_axis sg060_tilt_axes[] = {
-	    {
-		    .axis = ABS_RY,
-		    .min = 0,
-		    .max = 3,
-		    .fuzz = 0,
-		    .flat = 0,
-	    },
-    };
-
-    static struct gpio_tilt_platform_data sg060_tilt_pdata= {
-	    .gpios = sg060_tilt_gpios,
-	    .nr_gpios = ARRAY_SIZE(sg060_tilt_gpios),
-
-	    .axes = sg060_tilt_axes,
-	    .nr_axes = ARRAY_SIZE(sg060_tilt_axes),
-
-	    .states = sg060_tilt_states,
-	    .nr_states = ARRAY_SIZE(sg060_tilt_states),
-
-	    .debounce_interval = 100,
-
-	    .poll_interval = 1000,
-	    .enable = sg060_tilt_enable,
-	    .disable = sg060_tilt_disable,
-    };
-
-    static struct platform_device sg060_device_tilt = {
-	    .name = "gpio-tilt-polled",
-	    .id = -1,
-	    .dev = {
-		    .platform_data = &sg060_tilt_pdata,
-	    },
-    };
diff --git a/Documentation/input/devices/rotary-encoder.rst b/Documentation/input/devices/rotary-encoder.rst
index b07b20a295ac..810ae02bdaa0 100644
--- a/Documentation/input/devices/rotary-encoder.rst
+++ b/Documentation/input/devices/rotary-encoder.rst
@@ -108,9 +108,9 @@ example below:
 	};
 
 	static const struct property_entry rotary_encoder_properties[] __initconst = {
-		PROPERTY_ENTRY_INTEGER("rotary-encoder,steps-per-period", u32, 24),
-		PROPERTY_ENTRY_INTEGER("linux,axis",			  u32, ABS_X),
-		PROPERTY_ENTRY_INTEGER("rotary-encoder,relative_axis",	  u32, 0),
+		PROPERTY_ENTRY_U32("rotary-encoder,steps-per-period", 24),
+		PROPERTY_ENTRY_U32("linux,axis",		      ABS_X),
+		PROPERTY_ENTRY_U32("rotary-encoder,relative_axis",    0),
 		{ },
 	};
 
diff --git a/Documentation/input/ff.rst b/Documentation/input/ff.rst
index 26d461998e08..0c02e87ee86d 100644
--- a/Documentation/input/ff.rst
+++ b/Documentation/input/ff.rst
@@ -31,7 +31,7 @@ To enable force feedback, you have to:
 
 Before you start, let me WARN you that some devices shake violently during the
 initialisation phase. This happens for example with my "AVB Top Shot Pegasus".
-To stop this annoying behaviour, move you joystick to its limits. Anyway, you
+To stop this annoying behaviour, move your joystick to its limits. Anyway, you
 should keep a hand on your device, in order to avoid it to break down if
 something goes wrong.
 
@@ -121,7 +121,7 @@ uploaded, but not played.
 The content of effect may be modified. In particular, its field "id" is set
 to the unique id assigned by the driver. This data is required for performing
 some operations (removing an effect, controlling the playback).
-This if field must be set to -1 by the user in order to tell the driver to
+The "id" field must be set to -1 by the user in order to tell the driver to
 allocate a new effect.
 
 Effects are file descriptor specific.
@@ -178,7 +178,7 @@ Control of playing is done with write(). Below is an example:
 	stop.code = effect.id;
 	stop.value = 0;
 
-	write(fd, (const void*) &play, sizeof(stop));
+	write(fd, (const void*) &stop, sizeof(stop));
 
 Setting the gain
 ----------------