summaryrefslogtreecommitdiffstats
path: root/Documentation/isdn/README.gigaset
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/isdn/README.gigaset')
-rw-r--r--Documentation/isdn/README.gigaset10
1 files changed, 5 insertions, 5 deletions
diff --git a/Documentation/isdn/README.gigaset b/Documentation/isdn/README.gigaset
index 794941fc9493..e472df842323 100644
--- a/Documentation/isdn/README.gigaset
+++ b/Documentation/isdn/README.gigaset
@@ -292,10 +292,10 @@ GigaSet 307x Device Driver
to /etc/modprobe.d/gigaset, /etc/modprobe.conf.local or a similar file.
Problem:
- Your isdn script aborts with a message about isdnlog.
+ The isdnlog program emits error messages or just doesn't work.
Solution:
- Try deactivating (or commenting out) isdnlog. This driver does not
- support it.
+ Isdnlog supports only the HiSax driver. Do not attempt to use it with
+ other drivers such as Gigaset.
Problem:
You have two or more DECT data adapters (M101/M105) and only the
@@ -321,8 +321,8 @@ GigaSet 307x Device Driver
writing an appropriate value to /sys/module/gigaset/parameters/debug, e.g.
echo 0 > /sys/module/gigaset/parameters/debug
switches off debugging output completely,
- echo 0x10a020 > /sys/module/gigaset/parameters/debug
- enables the standard set of debugging output messages. These values are
+ echo 0x302020 > /sys/module/gigaset/parameters/debug
+ enables a reasonable set of debugging output messages. These values are
bit patterns where every bit controls a certain type of debugging output.
See the constants DEBUG_* in the source file gigaset.h for details.