summaryrefslogtreecommitdiffstats
path: root/Documentation/switchtec.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/switchtec.txt')
-rw-r--r--Documentation/switchtec.txt80
1 files changed, 80 insertions, 0 deletions
diff --git a/Documentation/switchtec.txt b/Documentation/switchtec.txt
new file mode 100644
index 000000000000..a0a9c7b3d4d5
--- /dev/null
+++ b/Documentation/switchtec.txt
@@ -0,0 +1,80 @@
+========================
+Linux Switchtec Support
+========================
+
+Microsemi's "Switchtec" line of PCI switch devices is already
+supported by the kernel with standard PCI switch drivers. However, the
+Switchtec device advertises a special management endpoint which
+enables some additional functionality. This includes:
+
+* Packet and Byte Counters
+* Firmware Upgrades
+* Event and Error logs
+* Querying port link status
+* Custom user firmware commands
+
+The switchtec kernel module implements this functionality.
+
+
+Interface
+=========
+
+The primary means of communicating with the Switchtec management firmware is
+through the Memory-mapped Remote Procedure Call (MRPC) interface.
+Commands are submitted to the interface with a 4-byte command
+identifier and up to 1KB of command specific data. The firmware will
+respond with a 4 bytes return code and up to 1KB of command specific
+data. The interface only processes a single command at a time.
+
+
+Userspace Interface
+===================
+
+The MRPC interface will be exposed to userspace through a simple char
+device: /dev/switchtec#, one for each management endpoint in the system.
+
+The char device has the following semantics:
+
+* A write must consist of at least 4 bytes and no more than 1028 bytes.
+ The first four bytes will be interpreted as the command to run and
+ the remainder will be used as the input data. A write will send the
+ command to the firmware to begin processing.
+
+* Each write must be followed by exactly one read. Any double write will
+ produce an error and any read that doesn't follow a write will
+ produce an error.
+
+* A read will block until the firmware completes the command and return
+ the four bytes of status plus up to 1024 bytes of output data. (The
+ length will be specified by the size parameter of the read call --
+ reading less than 4 bytes will produce an error.
+
+* The poll call will also be supported for userspace applications that
+ need to do other things while waiting for the command to complete.
+
+The following IOCTLs are also supported by the device:
+
+* SWITCHTEC_IOCTL_FLASH_INFO - Retrieve firmware length and number
+ of partitions in the device.
+
+* SWITCHTEC_IOCTL_FLASH_PART_INFO - Retrieve address and lengeth for
+ any specified partition in flash.
+
+* SWITCHTEC_IOCTL_EVENT_SUMMARY - Read a structure of bitmaps
+ indicating all uncleared events.
+
+* SWITCHTEC_IOCTL_EVENT_CTL - Get the current count, clear and set flags
+ for any event. This ioctl takes in a switchtec_ioctl_event_ctl struct
+ with the event_id, index and flags set (index being the partition or PFF
+ number for non-global events). It returns whether the event has
+ occurred, the number of times and any event specific data. The flags
+ can be used to clear the count or enable and disable actions to
+ happen when the event occurs.
+ By using the SWITCHTEC_IOCTL_EVENT_FLAG_EN_POLL flag,
+ you can set an event to trigger a poll command to return with
+ POLLPRI. In this way, userspace can wait for events to occur.
+
+* SWITCHTEC_IOCTL_PFF_TO_PORT and SWITCHTEC_IOCTL_PORT_TO_PFF convert
+ between PCI Function Framework number (used by the event system)
+ and Switchtec Logic Port ID and Partition number (which is more
+ user friendly).