diff options
Diffstat (limited to 'Documentation/zorro.txt')
| -rw-r--r-- | Documentation/zorro.txt | 59 |
1 files changed, 30 insertions, 29 deletions
diff --git a/Documentation/zorro.txt b/Documentation/zorro.txt index d530971beb00..664072b017e3 100644 --- a/Documentation/zorro.txt +++ b/Documentation/zorro.txt @@ -1,12 +1,13 @@ - Writing Device Drivers for Zorro Devices - ---------------------------------------- +======================================== +Writing Device Drivers for Zorro Devices +======================================== -Written by Geert Uytterhoeven <geert@linux-m68k.org> -Last revised: September 5, 2003 +:Author: Written by Geert Uytterhoeven <geert@linux-m68k.org> +:Last revised: September 5, 2003 -1. Introduction ---------------- +Introduction +------------ The Zorro bus is the bus used in the Amiga family of computers. Thanks to AutoConfig(tm), it's 100% Plug-and-Play. @@ -20,12 +21,12 @@ There are two types of Zorro buses, Zorro II and Zorro III: with Zorro II. The Zorro III address space lies outside the first 16 MB. -2. Probing for Zorro Devices ----------------------------- +Probing for Zorro Devices +------------------------- -Zorro devices are found by calling `zorro_find_device()', which returns a -pointer to the `next' Zorro device with the specified Zorro ID. A probe loop -for the board with Zorro ID `ZORRO_PROD_xxx' looks like: +Zorro devices are found by calling ``zorro_find_device()``, which returns a +pointer to the ``next`` Zorro device with the specified Zorro ID. A probe loop +for the board with Zorro ID ``ZORRO_PROD_xxx`` looks like:: struct zorro_dev *z = NULL; @@ -35,8 +36,8 @@ for the board with Zorro ID `ZORRO_PROD_xxx' looks like: ... } -`ZORRO_WILDCARD' acts as a wildcard and finds any Zorro device. If your driver -supports different types of boards, you can use a construct like: +``ZORRO_WILDCARD`` acts as a wildcard and finds any Zorro device. If your driver +supports different types of boards, you can use a construct like:: struct zorro_dev *z = NULL; @@ -49,24 +50,24 @@ supports different types of boards, you can use a construct like: } -3. Zorro Resources ------------------- +Zorro Resources +--------------- Before you can access a Zorro device's registers, you have to make sure it's not yet in use. This is done using the I/O memory space resource management -functions: +functions:: request_mem_region() release_mem_region() -Shortcuts to claim the whole device's address space are provided as well: +Shortcuts to claim the whole device's address space are provided as well:: zorro_request_device zorro_release_device -4. Accessing the Zorro Address Space ------------------------------------- +Accessing the Zorro Address Space +--------------------------------- The address regions in the Zorro device resources are Zorro bus address regions. Due to the identity bus-physical address mapping on the Zorro bus, @@ -78,26 +79,26 @@ The treatment of these regions depends on the type of Zorro space: explicitly using z_ioremap(). Conversion from bus/physical Zorro II addresses to kernel virtual addresses - and vice versa is done using: + and vice versa is done using:: virt_addr = ZTWO_VADDR(bus_addr); bus_addr = ZTWO_PADDR(virt_addr); - Zorro III address space must be mapped explicitly using z_ioremap() first - before it can be accessed: + before it can be accessed:: virt_addr = z_ioremap(bus_addr, size); ... z_iounmap(virt_addr); -5. References -------------- +References +---------- -linux/include/linux/zorro.h -linux/include/uapi/linux/zorro.h -linux/include/uapi/linux/zorro_ids.h -linux/arch/m68k/include/asm/zorro.h -linux/drivers/zorro -/proc/bus/zorro +#. linux/include/linux/zorro.h +#. linux/include/uapi/linux/zorro.h +#. linux/include/uapi/linux/zorro_ids.h +#. linux/arch/m68k/include/asm/zorro.h +#. linux/drivers/zorro +#. /proc/bus/zorro |