summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/laptops/thinkpad-acpi.txt139
-rw-r--r--Documentation/thermal/sysfs-api.txt33
2 files changed, 149 insertions, 23 deletions
diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index 76cb428435da..01c6c3d8a7e3 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -1,7 +1,7 @@
ThinkPad ACPI Extras Driver
- Version 0.19
- January 06th, 2008
+ Version 0.20
+ April 09th, 2008
Borislav Deianov <borislav@users.sf.net>
Henrique de Moraes Holschuh <hmh@hmh.eng.br>
@@ -18,6 +18,11 @@ This driver used to be named ibm-acpi until kernel 2.6.21 and release
moved to the drivers/misc tree and renamed to thinkpad-acpi for kernel
2.6.22, and release 0.14.
+The driver is named "thinkpad-acpi". In some places, like module
+names, "thinkpad_acpi" is used because of userspace issues.
+
+"tpacpi" is used as a shorthand where "thinkpad-acpi" would be too
+long due to length limitations on some Linux kernel versions.
Status
------
@@ -571,6 +576,47 @@ netlink interface and the input layer interface, and don't bother at all
with hotkey_report_mode.
+Brightness hotkey notes:
+
+These are the current sane choices for brightness key mapping in
+thinkpad-acpi:
+
+For IBM and Lenovo models *without* ACPI backlight control (the ones on
+which thinkpad-acpi will autoload its backlight interface by default,
+and on which ACPI video does not export a backlight interface):
+
+1. Don't enable or map the brightness hotkeys in thinkpad-acpi, as
+ these older firmware versions unfortunately won't respect the hotkey
+ mask for brightness keys anyway, and always reacts to them. This
+ usually work fine, unless X.org drivers are doing something to block
+ the BIOS. In that case, use (3) below. This is the default mode of
+ operation.
+
+2. Enable the hotkeys, but map them to something else that is NOT
+ KEY_BRIGHTNESS_UP/DOWN or any other keycode that would cause
+ userspace to try to change the backlight level, and use that as an
+ on-screen-display hint.
+
+3. IF AND ONLY IF X.org drivers find a way to block the firmware from
+ automatically changing the brightness, enable the hotkeys and map
+ them to KEY_BRIGHTNESS_UP and KEY_BRIGHTNESS_DOWN, and feed that to
+ something that calls xbacklight. thinkpad-acpi will not be able to
+ change brightness in that case either, so you should disable its
+ backlight interface.
+
+For Lenovo models *with* ACPI backlight control:
+
+1. Load up ACPI video and use that. ACPI video will report ACPI
+ events for brightness change keys. Do not mess with thinkpad-acpi
+ defaults in this case. thinkpad-acpi should not have anything to do
+ with backlight events in a scenario where ACPI video is loaded:
+ brightness hotkeys must be disabled, and the backlight interface is
+ to be kept disabled as well. This is the default mode of operation.
+
+2. Do *NOT* load up ACPI video, enable the hotkeys in thinkpad-acpi,
+ and map them to KEY_BRIGHTNESS_UP and KEY_BRIGHTNESS_DOWN. Process
+ these keys on userspace somehow (e.g. by calling xbacklight).
+
Bluetooth
---------
@@ -647,16 +693,31 @@ while others are still having problems. For more information:
https://bugs.freedesktop.org/show_bug.cgi?id=2000
-ThinkLight control -- /proc/acpi/ibm/light
-------------------------------------------
+ThinkLight control
+------------------
+
+procfs: /proc/acpi/ibm/light
+sysfs attributes: as per LED class, for the "tpacpi::thinklight" LED
-The current status of the ThinkLight can be found in this file. A few
-models which do not make the status available will show it as
-"unknown". The available commands are:
+procfs notes:
+
+The ThinkLight status can be read and set through the procfs interface. A
+few models which do not make the status available will show the ThinkLight
+status as "unknown". The available commands are:
echo on > /proc/acpi/ibm/light
echo off > /proc/acpi/ibm/light
+sysfs notes:
+
+The ThinkLight sysfs interface is documented by the LED class
+documentation, in Documentation/leds-class.txt. The ThinkLight LED name
+is "tpacpi::thinklight".
+
+Due to limitations in the sysfs LED class, if the status of the thinklight
+cannot be read or if it is unknown, thinkpad-acpi will report it as "off".
+It is impossible to know if the status returned through sysfs is valid.
+
Docking / undocking -- /proc/acpi/ibm/dock
------------------------------------------
@@ -815,28 +876,63 @@ The cmos command interface is prone to firmware split-brain problems, as
in newer ThinkPads it is just a compatibility layer. Do not use it, it is
exported just as a debug tool.
-LED control -- /proc/acpi/ibm/led
----------------------------------
+LED control
+-----------
+
+procfs: /proc/acpi/ibm/led
+sysfs attributes: as per LED class, see below for names
+
+Some of the LED indicators can be controlled through this feature. On
+some older ThinkPad models, it is possible to query the status of the
+LED indicators as well. Newer ThinkPads cannot query the real status
+of the LED indicators.
-Some of the LED indicators can be controlled through this feature. The
-available commands are:
+procfs notes:
+
+The available commands are:
- echo '<led number> on' >/proc/acpi/ibm/led
- echo '<led number> off' >/proc/acpi/ibm/led
- echo '<led number> blink' >/proc/acpi/ibm/led
+ echo '<LED number> on' >/proc/acpi/ibm/led
+ echo '<LED number> off' >/proc/acpi/ibm/led
+ echo '<LED number> blink' >/proc/acpi/ibm/led
-The <led number> range is 0 to 7. The set of LEDs that can be
-controlled varies from model to model. Here is the mapping on the X40:
+The <LED number> range is 0 to 7. The set of LEDs that can be
+controlled varies from model to model. Here is the common ThinkPad
+mapping:
0 - power
1 - battery (orange)
2 - battery (green)
- 3 - UltraBase
+ 3 - UltraBase/dock
4 - UltraBay
+ 5 - UltraBase battery slot
+ 6 - (unknown)
7 - standby
All of the above can be turned on and off and can be made to blink.
+sysfs notes:
+
+The ThinkPad LED sysfs interface is described in detail by the LED class
+documentation, in Documentation/leds-class.txt.
+
+The leds are named (in LED ID order, from 0 to 7):
+"tpacpi::power", "tpacpi:orange:batt", "tpacpi:green:batt",
+"tpacpi::dock_active", "tpacpi::bay_active", "tpacpi::dock_batt",
+"tpacpi::unknown_led", "tpacpi::standby".
+
+Due to limitations in the sysfs LED class, if the status of the LED
+indicators cannot be read due to an error, thinkpad-acpi will report it as
+a brightness of zero (same as LED off).
+
+If the thinkpad firmware doesn't support reading the current status,
+trying to read the current LED brightness will just return whatever
+brightness was last written to that attribute.
+
+These LEDs can blink using hardware acceleration. To request that a
+ThinkPad indicator LED should blink in hardware accelerated mode, use the
+"timer" trigger, and leave the delay_on and delay_off parameters set to
+zero (to request hardware acceleration autodetection).
+
ACPI sounds -- /proc/acpi/ibm/beep
----------------------------------
@@ -1090,6 +1186,15 @@ it there will be the following attributes:
dim the display.
+WARNING:
+
+ Whatever you do, do NOT ever call thinkpad-acpi backlight-level change
+ interface and the ACPI-based backlight level change interface
+ (available on newer BIOSes, and driven by the Linux ACPI video driver)
+ at the same time. The two will interact in bad ways, do funny things,
+ and maybe reduce the life of the backlight lamps by needlessly kicking
+ its level up and down at every change.
+
Volume control -- /proc/acpi/ibm/volume
---------------------------------------
diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt
index d9f28be75403..70d68ce8640a 100644
--- a/Documentation/thermal/sysfs-api.txt
+++ b/Documentation/thermal/sysfs-api.txt
@@ -108,10 +108,12 @@ and throttle appropriate devices.
RO read only value
RW read/write value
-All thermal sysfs attributes will be represented under /sys/class/thermal
+Thermal sysfs attributes will be represented under /sys/class/thermal.
+Hwmon sysfs I/F extension is also available under /sys/class/hwmon
+if hwmon is compiled in or built as a module.
Thermal zone device sys I/F, created once it's registered:
-|thermal_zone[0-*]:
+/sys/class/thermal/thermal_zone[0-*]:
|-----type: Type of the thermal zone
|-----temp: Current temperature
|-----mode: Working mode of the thermal zone
@@ -119,7 +121,7 @@ Thermal zone device sys I/F, created once it's registered:
|-----trip_point_[0-*]_type: Trip point type
Thermal cooling device sys I/F, created once it's registered:
-|cooling_device[0-*]:
+/sys/class/thermal/cooling_device[0-*]:
|-----type : Type of the cooling device(processor/fan/...)
|-----max_state: Maximum cooling state of the cooling device
|-----cur_state: Current cooling state of the cooling device
@@ -130,10 +132,19 @@ They represent the relationship between a thermal zone and its associated coolin
They are created/removed for each
thermal_zone_bind_cooling_device/thermal_zone_unbind_cooling_device successful execution.
-|thermal_zone[0-*]
+/sys/class/thermal/thermal_zone[0-*]
|-----cdev[0-*]: The [0-*]th cooling device in the current thermal zone
|-----cdev[0-*]_trip_point: Trip point that cdev[0-*] is associated with
+Besides the thermal zone device sysfs I/F and cooling device sysfs I/F,
+the generic thermal driver also creates a hwmon sysfs I/F for each _type_ of
+thermal zone device. E.g. the generic thermal driver registers one hwmon class device
+and build the associated hwmon sysfs I/F for all the registered ACPI thermal zones.
+/sys/class/hwmon/hwmon[0-*]:
+ |-----name: The type of the thermal zone devices.
+ |-----temp[1-*]_input: The current temperature of thermal zone [1-*].
+ |-----temp[1-*]_critical: The critical trip point of thermal zone [1-*].
+Please read Documentation/hwmon/sysfs-interface for additional information.
***************************
* Thermal zone attributes *
@@ -141,7 +152,10 @@ thermal_zone_bind_cooling_device/thermal_zone_unbind_cooling_device successful e
type Strings which represent the thermal zone type.
This is given by thermal zone driver as part of registration.
- Eg: "ACPI thermal zone" indicates it's a ACPI thermal device
+ Eg: "acpitz" indicates it's an ACPI thermal device.
+ In order to keep it consistent with hwmon sys attribute,
+ this should be a short, lowercase string,
+ not containing spaces nor dashes.
RO
Required
@@ -218,7 +232,7 @@ the sys I/F structure will be built like this:
/sys/class/thermal:
|thermal_zone1:
- |-----type: ACPI thermal zone
+ |-----type: acpitz
|-----temp: 37000
|-----mode: kernel
|-----trip_point_0_temp: 100000
@@ -243,3 +257,10 @@ the sys I/F structure will be built like this:
|-----type: Fan
|-----max_state: 2
|-----cur_state: 0
+
+/sys/class/hwmon:
+
+|hwmon0:
+ |-----name: acpitz
+ |-----temp1_input: 37000
+ |-----temp1_crit: 100000