diff options
Diffstat (limited to 'Documentation')
3 files changed, 125 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/timer/renesas,cmt.txt b/Documentation/devicetree/bindings/timer/renesas,cmt.txt new file mode 100644 index 000000000000..a17418b0ece3 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/renesas,cmt.txt @@ -0,0 +1,47 @@ +* Renesas R-Car Compare Match Timer (CMT) + +The CMT is a multi-channel 16/32/48-bit timer/counter with configurable clock +inputs and programmable compare match. + +Channels share hardware resources but their counter and compare match value +are independent. A particular CMT instance can implement only a subset of the +channels supported by the CMT model. Channel indices represent the hardware +position of the channel in the CMT and don't match the channel numbers in the +datasheets. + +Required Properties: + + - compatible: must contain one of the following. + - "renesas,cmt-32" for the 32-bit CMT + (CMT0 on sh7372, sh73a0 and r8a7740) + - "renesas,cmt-32-fast" for the 32-bit CMT with fast clock support + (CMT[234] on sh7372, sh73a0 and r8a7740) + - "renesas,cmt-48" for the 48-bit CMT + (CMT1 on sh7372, sh73a0 and r8a7740) + - "renesas,cmt-48-gen2" for the second generation 48-bit CMT + (CMT[01] on r8a73a4, r8a7790 and r8a7791) + + - reg: base address and length of the registers block for the timer module. + - interrupts: interrupt-specifier for the timer, one per channel. + - clocks: a list of phandle + clock-specifier pairs, one for each entry + in clock-names. + - clock-names: must contain "fck" for the functional clock. + + - renesas,channels-mask: bitmask of the available channels. + + +Example: R8A7790 (R-Car H2) CMT0 node + + CMT0 on R8A7790 implements hardware channels 5 and 6 only and names + them channels 0 and 1 in the documentation. + + cmt0: timer@ffca0000 { + compatible = "renesas,cmt-48-gen2"; + reg = <0 0xffca0000 0 0x1004>; + interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>, + <0 142 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7790_CLK_CMT0>; + clock-names = "fck"; + + renesas,channels-mask = <0x60>; + }; diff --git a/Documentation/devicetree/bindings/timer/renesas,mtu2.txt b/Documentation/devicetree/bindings/timer/renesas,mtu2.txt new file mode 100644 index 000000000000..917453f826bc --- /dev/null +++ b/Documentation/devicetree/bindings/timer/renesas,mtu2.txt @@ -0,0 +1,39 @@ +* Renesas R-Car Multi-Function Timer Pulse Unit 2 (MTU2) + +The MTU2 is a multi-purpose, multi-channel timer/counter with configurable +clock inputs and programmable compare match. + +Channels share hardware resources but their counter and compare match value +are independent. The MTU2 hardware supports five channels indexed from 0 to 4. + +Required Properties: + + - compatible: must contain "renesas,mtu2" + + - reg: base address and length of the registers block for the timer module. + + - interrupts: interrupt specifiers for the timer, one for each entry in + interrupt-names. + - interrupt-names: must contain one entry named "tgi?a" for each enabled + channel, where "?" is the channel index expressed as one digit from "0" to + "4". + + - clocks: a list of phandle + clock-specifier pairs, one for each entry + in clock-names. + - clock-names: must contain "fck" for the functional clock. + + +Example: R7S72100 (RZ/A1H) MTU2 node + + mtu2: timer@fcff0000 { + compatible = "renesas,mtu2"; + reg = <0xfcff0000 0x400>; + interrupts = <0 139 IRQ_TYPE_LEVEL_HIGH>, + <0 146 IRQ_TYPE_LEVEL_HIGH>, + <0 150 IRQ_TYPE_LEVEL_HIGH>, + <0 154 IRQ_TYPE_LEVEL_HIGH>, + <0 159 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tgi0a", "tgi1a", "tgi2a", "tgi3a", "tgi4a"; + clocks = <&mstp3_clks R7S72100_CLK_MTU2>; + clock-names = "fck"; + }; diff --git a/Documentation/devicetree/bindings/timer/renesas,tmu.txt b/Documentation/devicetree/bindings/timer/renesas,tmu.txt new file mode 100644 index 000000000000..425d0c5f4aee --- /dev/null +++ b/Documentation/devicetree/bindings/timer/renesas,tmu.txt @@ -0,0 +1,39 @@ +* Renesas R-Car Timer Unit (TMU) + +The TMU is a 32-bit timer/counter with configurable clock inputs and +programmable compare match. + +Channels share hardware resources but their counter and compare match value +are independent. The TMU hardware supports up to three channels. + +Required Properties: + + - compatible: must contain "renesas,tmu" + + - reg: base address and length of the registers block for the timer module. + + - interrupts: interrupt-specifier for the timer, one per channel. + + - clocks: a list of phandle + clock-specifier pairs, one for each entry + in clock-names. + - clock-names: must contain "fck" for the functional clock. + +Optional Properties: + + - #renesas,channels: number of channels implemented by the timer, must be 2 + or 3 (if not specified the value defaults to 3). + + +Example: R8A7779 (R-Car H1) TMU0 node + + tmu0: timer@ffd80000 { + compatible = "renesas,tmu"; + reg = <0xffd80000 0x30>; + interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>, + <0 33 IRQ_TYPE_LEVEL_HIGH>, + <0 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7779_CLK_TMU0>; + clock-names = "fck"; + + #renesas,channels = <3>; + }; |