summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/acpi/apei/einj.txt59
-rw-r--r--Documentation/kernel-parameters.txt12
2 files changed, 69 insertions, 2 deletions
diff --git a/Documentation/acpi/apei/einj.txt b/Documentation/acpi/apei/einj.txt
new file mode 100644
index 000000000000..dfab71848dc8
--- /dev/null
+++ b/Documentation/acpi/apei/einj.txt
@@ -0,0 +1,59 @@
+ APEI Error INJection
+ ~~~~~~~~~~~~~~~~~~~~
+
+EINJ provides a hardware error injection mechanism
+It is very useful for debugging and testing of other APEI and RAS features.
+
+To use EINJ, make sure the following are enabled in your kernel
+configuration:
+
+CONFIG_DEBUG_FS
+CONFIG_ACPI_APEI
+CONFIG_ACPI_APEI_EINJ
+
+The user interface of EINJ is debug file system, under the
+directory apei/einj. The following files are provided.
+
+- available_error_type
+ Reading this file returns the error injection capability of the
+ platform, that is, which error types are supported. The error type
+ definition is as follow, the left field is the error type value, the
+ right field is error description.
+
+ 0x00000001 Processor Correctable
+ 0x00000002 Processor Uncorrectable non-fatal
+ 0x00000004 Processor Uncorrectable fatal
+ 0x00000008 Memory Correctable
+ 0x00000010 Memory Uncorrectable non-fatal
+ 0x00000020 Memory Uncorrectable fatal
+ 0x00000040 PCI Express Correctable
+ 0x00000080 PCI Express Uncorrectable fatal
+ 0x00000100 PCI Express Uncorrectable non-fatal
+ 0x00000200 Platform Correctable
+ 0x00000400 Platform Uncorrectable non-fatal
+ 0x00000800 Platform Uncorrectable fatal
+
+ The format of file contents are as above, except there are only the
+ available error type lines.
+
+- error_type
+ This file is used to set the error type value. The error type value
+ is defined in "available_error_type" description.
+
+- error_inject
+ Write any integer to this file to trigger the error
+ injection. Before this, please specify all necessary error
+ parameters.
+
+- param1
+ This file is used to set the first error parameter value. Effect of
+ parameter depends on error_type specified. For memory error, this is
+ physical memory address.
+
+- param2
+ This file is used to set the second error parameter value. Effect of
+ parameter depends on error_type specified. For memory error, this is
+ physical memory address mask.
+
+For more information about EINJ, please refer to ACPI specification
+version 4.0, section 17.5.
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index a5c055066764..1808f1157f30 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -145,11 +145,10 @@ and is between 256 and 4096 characters. It is defined in the file
acpi= [HW,ACPI,X86]
Advanced Configuration and Power Interface
- Format: { force | off | ht | strict | noirq | rsdt }
+ Format: { force | off | strict | noirq | rsdt }
force -- enable ACPI if default was off
off -- disable ACPI if default was on
noirq -- do not use ACPI for IRQ routing
- ht -- run only enough ACPI to enable Hyper Threading
strict -- Be less tolerant of platforms that are not
strictly ACPI specification compliant.
rsdt -- prefer RSDT over (default) XSDT
@@ -758,6 +757,10 @@ and is between 256 and 4096 characters. It is defined in the file
Default value is 0.
Value can be changed at runtime via /selinux/enforce.
+ erst_disable [ACPI]
+ Disable Error Record Serialization Table (ERST)
+ support.
+
ether= [HW,NET] Ethernet cards parameters
This option is obsoleted by the "netdev=" option, which
has equivalent usage. See its documentation for details.
@@ -852,6 +855,11 @@ and is between 256 and 4096 characters. It is defined in the file
hd= [EIDE] (E)IDE hard drive subsystem geometry
Format: <cyl>,<head>,<sect>
+ hest_disable [ACPI]
+ Disable Hardware Error Source Table (HEST) support;
+ corresponding firmware-first mode error processing
+ logic will be disabled.
+
highmem=nn[KMG] [KNL,BOOT] forces the highmem zone to have an exact
size of <nn>. This works even on boxes that have no
highmem otherwise. This also works to reduce highmem