diff options
Diffstat (limited to 'Documentation')
417 files changed, 20688 insertions, 6046 deletions
diff --git a/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-savu b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-savu index f1e02a98bd9d..99fda67fce18 100644 --- a/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-savu +++ b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-savu @@ -3,9 +3,10 @@ Date: Mai 2012 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: The mouse can store 5 profiles which can be switched by the press of a button. A profile is split into general settings and - button settings. buttons holds informations about button layout. - When written, this file lets one write the respective profile - buttons to the mouse. The data has to be 47 bytes long. + button settings. The buttons variable holds information about + button layout. When written, this file lets one write the + respective profile buttons to the mouse. The data has to be + 47 bytes long. The mouse will reject invalid data. Which profile to write is determined by the profile number contained in the data. @@ -26,8 +27,8 @@ Date: Mai 2012 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: The mouse can store 5 profiles which can be switched by the press of a button. A profile is split into general settings and - button settings. profile holds informations like resolution, sensitivity - and light effects. + button settings. A profile holds information like resolution, + sensitivity and light effects. When written, this file lets one write the respective profile settings back to the mouse. The data has to be 43 bytes long. The mouse will reject invalid data. diff --git a/Documentation/ABI/testing/sysfs-block-zram b/Documentation/ABI/testing/sysfs-block-zram index 2e69e83bf510..4518d30b8c2e 100644 --- a/Documentation/ABI/testing/sysfs-block-zram +++ b/Documentation/ABI/testing/sysfs-block-zram @@ -166,3 +166,12 @@ Description: The mm_stat file is read-only and represents device's mm statistics (orig_data_size, compr_data_size, etc.) in a format similar to block layer statistics file format. + +What: /sys/block/zram<id>/debug_stat +Date: July 2016 +Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> +Description: + The debug_stat file is read-only and represents various + device's debugging info useful for kernel developers. Its + format is not documented intentionally and may change + anytime without any notice. diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etb10 b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etb10 index 4b8d6ec92e2b..b5f526081711 100644 --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etb10 +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etb10 @@ -6,13 +6,6 @@ Description: (RW) Add/remove a sink from a trace path. There can be multiple source for a single sink. ex: echo 1 > /sys/bus/coresight/devices/20010000.etb/enable_sink -What: /sys/bus/coresight/devices/<memory_map>.etb/status -Date: November 2014 -KernelVersion: 3.19 -Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) List various control and status registers. The specific - layout and content is driver specific. - What: /sys/bus/coresight/devices/<memory_map>.etb/trigger_cntr Date: November 2014 KernelVersion: 3.19 @@ -22,3 +15,65 @@ Description: (RW) Disables write access to the Trace RAM by stopping the following the trigger event. The number of 32-bit words written into the Trace RAM following the trigger event is equal to the value stored in this register+1 (from ARM ETB-TRM). + +What: /sys/bus/coresight/devices/<memory_map>.etb/mgmt/rdp +Date: March 2016 +KernelVersion: 4.7 +Contact: Mathieu Poirier <mathieu.poirier@linaro.org> +Description: (R) Defines the depth, in words, of the trace RAM in powers of + 2. The value is read directly from HW register RDP, 0x004. + +What: /sys/bus/coresight/devices/<memory_map>.etb/mgmt/sts +Date: March 2016 +KernelVersion: 4.7 +Contact: Mathieu Poirier <mathieu.poirier@linaro.org> +Description: (R) Shows the value held by the ETB status register. The value + is read directly from HW register STS, 0x00C. + +What: /sys/bus/coresight/devices/<memory_map>.etb/mgmt/rrp +Date: March 2016 +KernelVersion: 4.7 +Contact: Mathieu Poirier <mathieu.poirier@linaro.org> +Description: (R) Shows the value held by the ETB RAM Read Pointer register + that is used to read entries from the Trace RAM over the APB + interface. The value is read directly from HW register RRP, + 0x014. + +What: /sys/bus/coresight/devices/<memory_map>.etb/mgmt/rwp +Date: March 2016 +KernelVersion: 4.7 +Contact: Mathieu Poirier <mathieu.poirier@linaro.org> +Description: (R) Shows the value held by the ETB RAM Write Pointer register + that is used to sets the write pointer to write entries from + the CoreSight bus into the Trace RAM. The value is read directly + from HW register RWP, 0x018. + +What: /sys/bus/coresight/devices/<memory_map>.etb/mgmt/trg +Date: March 2016 +KernelVersion: 4.7 +Contact: Mathieu Poirier <mathieu.poirier@linaro.org> +Description: (R) Similar to "trigger_cntr" above except that this value is + read directly from HW register TRG, 0x01C. + +What: /sys/bus/coresight/devices/<memory_map>.etb/mgmt/ctl +Date: March 2016 +KernelVersion: 4.7 +Contact: Mathieu Poirier <mathieu.poirier@linaro.org> +Description: (R) Shows the value held by the ETB Control register. The value + is read directly from HW register CTL, 0x020. + +What: /sys/bus/coresight/devices/<memory_map>.etb/mgmt/ffsr +Date: March 2016 +KernelVersion: 4.7 +Contact: Mathieu Poirier <mathieu.poirier@linaro.org> +Description: (R) Shows the value held by the ETB Formatter and Flush Status + register. The value is read directly from HW register FFSR, + 0x300. + +What: /sys/bus/coresight/devices/<memory_map>.etb/mgmt/ffcr +Date: March 2016 +KernelVersion: 4.7 +Contact: Mathieu Poirier <mathieu.poirier@linaro.org> +Description: (R) Shows the value held by the ETB Formatter and Flush Control + register. The value is read directly from HW register FFCR, + 0x304. diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x index 2355ed8ae31f..36258bc1b473 100644 --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x @@ -359,6 +359,19 @@ Contact: Mathieu Poirier <mathieu.poirier@linaro.org> Description: (R) Print the content of the Peripheral ID3 Register (0xFEC). The value is taken directly from the HW. +What: /sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcconfig +Date: February 2016 +KernelVersion: 4.07 +Contact: Mathieu Poirier <mathieu.poirier@linaro.org> +Description: (R) Print the content of the trace configuration register + (0x010) as currently set by SW. + +What: /sys/bus/coresight/devices/<memory_map>.etm/mgmt/trctraceid +Date: February 2016 +KernelVersion: 4.07 +Contact: Mathieu Poirier <mathieu.poirier@linaro.org> +Description: (R) Print the content of the trace ID register (0x040). + What: /sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr0 Date: April 2015 KernelVersion: 4.01 diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-stm b/Documentation/ABI/testing/sysfs-bus-coresight-devices-stm new file mode 100644 index 000000000000..1dffabe7f48d --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-stm @@ -0,0 +1,53 @@ +What: /sys/bus/coresight/devices/<memory_map>.stm/enable_source +Date: April 2016 +KernelVersion: 4.7 +Contact: Mathieu Poirier <mathieu.poirier@linaro.org> +Description: (RW) Enable/disable tracing on this specific trace macrocell. + Enabling the trace macrocell implies it has been configured + properly and a sink has been identified for it. The path + of coresight components linking the source to the sink is + configured and managed automatically by the coresight framework. + +What: /sys/bus/coresight/devices/<memory_map>.stm/hwevent_enable +Date: April 2016 +KernelVersion: 4.7 +Contact: Mathieu Poirier <mathieu.poirier@linaro.org> +Description: (RW) Provides access to the HW event enable register, used in + conjunction with HW event bank select register. + +What: /sys/bus/coresight/devices/<memory_map>.stm/hwevent_select +Date: April 2016 +KernelVersion: 4.7 +Contact: Mathieu Poirier <mathieu.poirier@linaro.org> +Description: (RW) Gives access to the HW event block select register + (STMHEBSR) in order to configure up to 256 channels. Used in + conjunction with "hwevent_enable" register as described above. + +What: /sys/bus/coresight/devices/<memory_map>.stm/port_enable +Date: April 2016 +KernelVersion: 4.7 +Contact: Mathieu Poirier <mathieu.poirier@linaro.org> +Description: (RW) Provides access to the stimulus port enable register + (STMSPER). Used in conjunction with "port_select" described + below. + +What: /sys/bus/coresight/devices/<memory_map>.stm/port_select +Date: April 2016 +KernelVersion: 4.7 +Contact: Mathieu Poirier <mathieu.poirier@linaro.org> +Description: (RW) Used to determine which bank of stimulus port bit in + register STMSPER (see above) apply to. + +What: /sys/bus/coresight/devices/<memory_map>.stm/status +Date: April 2016 +KernelVersion: 4.7 +Contact: Mathieu Poirier <mathieu.poirier@linaro.org> +Description: (R) List various control and status registers. The specific + layout and content is driver specific. + +What: /sys/bus/coresight/devices/<memory_map>.stm/traceid +Date: April 2016 +KernelVersion: 4.7 +Contact: Mathieu Poirier <mathieu.poirier@linaro.org> +Description: (RW) Holds the trace ID that will appear in the trace stream + coming from this trace entity. diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc index f38cded5fa22..4fe677ed1305 100644 --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc @@ -6,3 +6,80 @@ Description: (RW) Disables write access to the Trace RAM by stopping the formatter after a defined number of words have been stored following the trigger event. Additional interface for this driver are expected to be added as it matures. + +What: /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/rsz +Date: March 2016 +KernelVersion: 4.7 +Contact: Mathieu Poirier <mathieu.poirier@linaro.org> +Description: (R) Defines the size, in 32-bit words, of the local RAM buffer. + The value is read directly from HW register RSZ, 0x004. + +What: /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/sts +Date: March 2016 +KernelVersion: 4.7 +Contact: Mathieu Poirier <mathieu.poirier@linaro.org> +Description: (R) Shows the value held by the TMC status register. The value + is read directly from HW register STS, 0x00C. + +What: /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/rrp +Date: March 2016 +KernelVersion: 4.7 +Contact: Mathieu Poirier <mathieu.poirier@linaro.org> +Description: (R) Shows the value held by the TMC RAM Read Pointer register + that is used to read entries from the Trace RAM over the APB + interface. The value is read directly from HW register RRP, + 0x014. + +What: /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/rwp +Date: March 2016 +KernelVersion: 4.7 +Contact: Mathieu Poirier <mathieu.poirier@linaro.org> +Description: (R) Shows the value held by the TMC RAM Write Pointer register + that is used to sets the write pointer to write entries from + the CoreSight bus into the Trace RAM. The value is read directly + from HW register RWP, 0x018. + +What: /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/trg +Date: March 2016 +KernelVersion: 4.7 +Contact: Mathieu Poirier <mathieu.poirier@linaro.org> +Description: (R) Similar to "trigger_cntr" above except that this value is + read directly from HW register TRG, 0x01C. + +What: /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/ctl +Date: March 2016 +KernelVersion: 4.7 +Contact: Mathieu Poirier <mathieu.poirier@linaro.org> +Description: (R) Shows the value held by the TMC Control register. The value + is read directly from HW register CTL, 0x020. + +What: /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/ffsr +Date: March 2016 +KernelVersion: 4.7 +Contact: Mathieu Poirier <mathieu.poirier@linaro.org> +Description: (R) Shows the value held by the TMC Formatter and Flush Status + register. The value is read directly from HW register FFSR, + 0x300. + +What: /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/ffcr +Date: March 2016 +KernelVersion: 4.7 +Contact: Mathieu Poirier <mathieu.poirier@linaro.org> +Description: (R) Shows the value held by the TMC Formatter and Flush Control + register. The value is read directly from HW register FFCR, + 0x304. + +What: /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/mode +Date: March 2016 +KernelVersion: 4.7 +Contact: Mathieu Poirier <mathieu.poirier@linaro.org> +Description: (R) Shows the value held by the TMC Mode register, which + indicate the mode the device has been configured to enact. The + The value is read directly from the MODE register, 0x028. + +What: /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/devid +Date: March 2016 +KernelVersion: 4.7 +Contact: Mathieu Poirier <mathieu.poirier@linaro.org> +Description: (R) Indicates the capabilities of the Coresight TMC. + The value is read directly from the DEVID register, 0xFC8, diff --git a/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 index f893337570c1..ec27c6c9e737 100644 --- a/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 +++ b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 @@ -4,7 +4,7 @@ Contact: Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org> Description: Provides access to the binary "24x7 catalog" provided by the hypervisor on POWER7 and 8 systems. This catalog lists events - avaliable from the powerpc "hv_24x7" pmu. Its format is + available from the powerpc "hv_24x7" pmu. Its format is documented here: https://raw.githubusercontent.com/jmesmon/catalog-24x7/master/hv-24x7-catalog.h diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index 3c6624881375..df44998e7506 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -1233,7 +1233,7 @@ KernelVersion: 3.4 Contact: linux-iio@vger.kernel.org Description: Proximity measurement indicating that some - object is near the sensor, usually be observing + object is near the sensor, usually by observing reflectivity of infrared or ultrasound emitted. Often these sensors are unit less and as such conversion to SI units is not possible. Higher proximity measurements @@ -1255,12 +1255,23 @@ Description: What: /sys/.../iio:deviceX/in_intensityY_raw What: /sys/.../iio:deviceX/in_intensityY_ir_raw What: /sys/.../iio:deviceX/in_intensityY_both_raw +What: /sys/.../iio:deviceX/in_intensityY_uv_raw KernelVersion: 3.4 Contact: linux-iio@vger.kernel.org Description: Unit-less light intensity. Modifiers both and ir indicate that measurements contains visible and infrared light - components or just infrared light, respectively. + components or just infrared light, respectively. Modifier uv indicates + that measurements contain ultraviolet light components. + +What: /sys/.../iio:deviceX/in_uvindex_input +KernelVersion: 4.6 +Contact: linux-iio@vger.kernel.org +Description: + UV light intensity index measuring the human skin's response to + different wavelength of sunlight weighted according to the + standardised CIE Erythemal Action Spectrum. UV index values range + from 0 (low) to >=11 (extreme). What: /sys/.../iio:deviceX/in_intensity_red_integration_time What: /sys/.../iio:deviceX/in_intensity_green_integration_time @@ -1501,3 +1512,56 @@ Contact: linux-iio@vger.kernel.org Description: Raw (unscaled no offset etc.) pH reading of a substance as a negative base-10 logarithm of hydrodium ions in a litre of water. + +What: /sys/bus/iio/devices/iio:deviceX/mount_matrix +What: /sys/bus/iio/devices/iio:deviceX/in_mount_matrix +What: /sys/bus/iio/devices/iio:deviceX/out_mount_matrix +What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_mount_matrix +What: /sys/bus/iio/devices/iio:deviceX/in_accel_mount_matrix +KernelVersion: 4.6 +Contact: linux-iio@vger.kernel.org +Description: + Mounting matrix for IIO sensors. This is a rotation matrix which + informs userspace about sensor chip's placement relative to the + main hardware it is mounted on. + Main hardware placement is defined according to the local + reference frame related to the physical quantity the sensor + measures. + Given that the rotation matrix is defined in a board specific + way (platform data and / or device-tree), the main hardware + reference frame definition is left to the implementor's choice + (see below for a magnetometer example). + Applications should apply this rotation matrix to samples so + that when main hardware reference frame is aligned onto local + reference frame, then sensor chip reference frame is also + perfectly aligned with it. + Matrix is a 3x3 unitary matrix and typically looks like + [0, 1, 0; 1, 0, 0; 0, 0, -1]. Identity matrix + [1, 0, 0; 0, 1, 0; 0, 0, 1] means sensor chip and main hardware + are perfectly aligned with each other. + + For example, a mounting matrix for a magnetometer sensor informs + userspace about sensor chip's ORIENTATION relative to the main + hardware. + More specifically, main hardware orientation is defined with + respect to the LOCAL EARTH GEOMAGNETIC REFERENCE FRAME where : + * Y is in the ground plane and positive towards magnetic North ; + * X is in the ground plane, perpendicular to the North axis and + positive towards the East ; + * Z is perpendicular to the ground plane and positive upwards. + + An implementor might consider that for a hand-held device, a + 'natural' orientation would be 'front facing camera at the top'. + The main hardware reference frame could then be described as : + * Y is in the plane of the screen and is positive towards the + top of the screen ; + * X is in the plane of the screen, perpendicular to Y axis, and + positive towards the right hand side of the screen ; + * Z is perpendicular to the screen plane and positive out of the + screen. + Another example for a quadrotor UAV might be : + * Y is in the plane of the propellers and positive towards the + front-view camera; + * X is in the plane of the propellers, perpendicular to Y axis, + and positive towards the starboard side of the UAV ; + * Z is perpendicular to propellers plane and positive upwards. diff --git a/Documentation/ABI/testing/sysfs-bus-mcb b/Documentation/ABI/testing/sysfs-bus-mcb new file mode 100644 index 000000000000..77947c509796 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-mcb @@ -0,0 +1,29 @@ +What: /sys/bus/mcb/devices/mcb:X +Date: March 2016 +KernelVersion: 4.7 +Contact: Johannes Thumshirn <jth@kernel.org> +Description: Hardware chip or device hosting the MEN chameleon bus + +What: /sys/bus/mcb/devices/mcb:X/revision +Date: March 2016 +KernelVersion: 4.7 +Contact: Johannes Thumshirn <jth@kernel.org> +Description: The FPGA's revision number + +What: /sys/bus/mcb/devices/mcb:X/minor +Date: March 2016 +KernelVersion: 4.7 +Contact: Johannes Thumshirn <jth@kernel.org> +Description: The FPGA's minor number + +What: /sys/bus/mcb/devices/mcb:X/model +Date: March 2016 +KernelVersion: 4.7 +Contact: Johannes Thumshirn <jth@kernel.org> +Description: The FPGA's model number + +What: /sys/bus/mcb/devices/mcb:X/name +Date: March 2016 +KernelVersion: 4.7 +Contact: Johannes Thumshirn <jth@kernel.org> +Description: The FPGA's name diff --git a/Documentation/ABI/testing/sysfs-class-cxl b/Documentation/ABI/testing/sysfs-class-cxl index 7fd737eed38a..4ba0a2a61926 100644 --- a/Documentation/ABI/testing/sysfs-class-cxl +++ b/Documentation/ABI/testing/sysfs-class-cxl @@ -233,3 +233,11 @@ Description: read/write 0 = don't trust, the image may be different (default) 1 = trust that the image will not change. Users: https://github.com/ibm-capi/libcxl + +What: /sys/class/cxl/<card>/psl_timebase_synced +Date: March 2016 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read only + Returns 1 if the psl timebase register is synchronized + with the core timebase register, 0 otherwise. +Users: https://github.com/ibm-capi/libcxl diff --git a/Documentation/ABI/testing/sysfs-class-stm b/Documentation/ABI/testing/sysfs-class-stm index c9aa4f3fc9a7..77ed3da0f68e 100644 --- a/Documentation/ABI/testing/sysfs-class-stm +++ b/Documentation/ABI/testing/sysfs-class-stm @@ -12,3 +12,13 @@ KernelVersion: 4.3 Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com> Description: Shows the number of channels per master on this STM device. + +What: /sys/class/stm/<stm>/hw_override +Date: March 2016 +KernelVersion: 4.7 +Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com> +Description: + Reads as 0 if master numbers in the STP stream produced by + this stm device will match the master numbers assigned by + the software or 1 if the stm hardware overrides software + assigned masters. diff --git a/Documentation/ABI/testing/sysfs-driver-hid-picolcd b/Documentation/ABI/testing/sysfs-driver-hid-picolcd index 08579e7e1e89..98fd81ad76a1 100644 --- a/Documentation/ABI/testing/sysfs-driver-hid-picolcd +++ b/Documentation/ABI/testing/sysfs-driver-hid-picolcd @@ -39,5 +39,5 @@ Description: Make it possible to adjust defio refresh rate. Note: As device can barely do 2 complete refreshes a second it only makes sense to adjust this value if only one or two tiles get changed and it's not appropriate to expect the application - to flush it's tiny changes explicitely at higher than default rate. + to flush its tiny changes explicitly at higher than default rate. diff --git a/Documentation/ABI/testing/sysfs-firmware-acpi b/Documentation/ABI/testing/sysfs-firmware-acpi index b4436cca97a8..c7fc72d4495c 100644 --- a/Documentation/ABI/testing/sysfs-firmware-acpi +++ b/Documentation/ABI/testing/sysfs-firmware-acpi @@ -169,7 +169,7 @@ Description: to enable/disable/clear ACPI interrupts in user space, which can be used to debug some ACPI interrupt storm issues. - Note that only writting to VALID GPE/Fixed Event is allowed, + Note that only writing to VALID GPE/Fixed Event is allowed, i.e. user can only change the status of runtime GPE and Fixed Event with event handler installed. diff --git a/Documentation/ABI/testing/sysfs-ibft b/Documentation/ABI/testing/sysfs-ibft index cac3930bdb04..7d6725fe6143 100644 --- a/Documentation/ABI/testing/sysfs-ibft +++ b/Documentation/ABI/testing/sysfs-ibft @@ -21,3 +21,13 @@ Contact: Konrad Rzeszutek <ketuzsezr@darnok.org> Description: The /sys/firmware/ibft/ethernetX directory will contain files that expose the iSCSI Boot Firmware Table NIC data. Usually this contains the IP address, MAC, and gateway of the NIC. + +What: /sys/firmware/ibft/acpi_header +Date: March 2016 +Contact: David Bond <dbond@suse.com> +Description: The /sys/firmware/ibft/acpi_header directory will contain files + that expose the SIGNATURE, OEM_ID, and OEM_TABLE_ID fields of the + acpi table header of the iBFT structure. This will allow for + identification of the creator of the table which is useful in + determining quirks associated with some adapters when used in + hardware vs software iscsi initiator mode. diff --git a/Documentation/ABI/testing/sysfs-platform-hidma b/Documentation/ABI/testing/sysfs-platform-hidma new file mode 100644 index 000000000000..d36441538660 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-platform-hidma @@ -0,0 +1,9 @@ +What: /sys/devices/platform/hidma-*/chid + /sys/devices/platform/QCOM8061:*/chid +Date: Dec 2015 +KernelVersion: 4.4 +Contact: "Sinan Kaya <okaya@cudeaurora.org>" +Description: + Contains the ID of the channel within the HIDMA instance. + It is used to associate a given HIDMA channel with the + priority and weight calls in the management interface. diff --git a/Documentation/ABI/testing/sysfs-platform-usbip-vudc b/Documentation/ABI/testing/sysfs-platform-usbip-vudc new file mode 100644 index 000000000000..81fcfb454913 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-platform-usbip-vudc @@ -0,0 +1,35 @@ +What: /sys/devices/platform/usbip-vudc.%d/dev_desc +Date: April 2016 +KernelVersion: 4.6 +Contact: Krzysztof Opasiak <k.opasiak@samsung.com> +Description: + This file allows to read device descriptor of + gadget driver which is currently bound to this + controller. It is possible to read this file + only if gadget driver is bound, otherwise error + is returned. + +What: /sys/devices/platform/usbip-vudc.%d/usbip_status +Date: April 2016 +KernelVersion: 4.6 +Contact: Krzysztof Opasiak <k.opasiak@samsung.com> +Description: + Current status of the device. + Allowed values: + 1 - Device is available and can be exported + 2 - Device is currently exported + 3 - Fatal error occurred during communication + with peer + +What: /sys/devices/platform/usbip-vudc.%d/usbip_sockfd +Date: April 2016 +KernelVersion: 4.6 +Contact: Krzysztof Opasiak <k.opasiak@samsung.com> +Description: + This file allows to export usb device to + connection peer. It is done by writing to this + file socket fd (as a string for example "8") + associated with a connection to remote peer who + would like to use this device. It is possible to + close the connection by writing -1 instead of + socked fd. diff --git a/Documentation/DocBook/80211.tmpl b/Documentation/DocBook/80211.tmpl index f9b9ad7894f5..5f7c55999c77 100644 --- a/Documentation/DocBook/80211.tmpl +++ b/Documentation/DocBook/80211.tmpl @@ -75,7 +75,6 @@ <chapter> <title>Device registration</title> !Pinclude/net/cfg80211.h Device registration -!Finclude/net/cfg80211.h ieee80211_band !Finclude/net/cfg80211.h ieee80211_channel_flags !Finclude/net/cfg80211.h ieee80211_channel !Finclude/net/cfg80211.h ieee80211_rate_flags @@ -136,6 +135,7 @@ !Finclude/net/cfg80211.h cfg80211_tx_mlme_mgmt !Finclude/net/cfg80211.h cfg80211_ibss_joined !Finclude/net/cfg80211.h cfg80211_connect_result +!Finclude/net/cfg80211.h cfg80211_connect_bss !Finclude/net/cfg80211.h cfg80211_roamed !Finclude/net/cfg80211.h cfg80211_disconnected !Finclude/net/cfg80211.h cfg80211_ready_on_channel diff --git a/Documentation/DocBook/crypto-API.tmpl b/Documentation/DocBook/crypto-API.tmpl index 348619fcafb8..d55dc5a39bad 100644 --- a/Documentation/DocBook/crypto-API.tmpl +++ b/Documentation/DocBook/crypto-API.tmpl @@ -1936,9 +1936,9 @@ static int test_skcipher(void) } req = skcipher_request_alloc(skcipher, GFP_KERNEL); - if (IS_ERR(req)) { - pr_info("could not allocate request queue\n"); - ret = PTR_ERR(req); + if (!req) { + pr_info("could not allocate skcipher request\n"); + ret = -ENOMEM; goto out; } diff --git a/Documentation/DocBook/debugobjects.tmpl b/Documentation/DocBook/debugobjects.tmpl index 24979f691e3e..7e4f34fde697 100644 --- a/Documentation/DocBook/debugobjects.tmpl +++ b/Documentation/DocBook/debugobjects.tmpl @@ -316,8 +316,8 @@ </itemizedlist> </para> <para> - The function returns 1 when the fixup was successful, - otherwise 0. The return value is used to update the + The function returns true when the fixup was successful, + otherwise false. The return value is used to update the statistics. </para> <para> @@ -341,8 +341,8 @@ </itemizedlist> </para> <para> - The function returns 1 when the fixup was successful, - otherwise 0. The return value is used to update the + The function returns true when the fixup was successful, + otherwise false. The return value is used to update the statistics. </para> <para> @@ -359,7 +359,8 @@ statically initialized object or not. In case it is it calls debug_object_init() and debug_object_activate() to make the object known to the tracker and marked active. In this case - the function should return 0 because this is not a real fixup. + the function should return false because this is not a real + fixup. </para> </sect1> @@ -376,8 +377,8 @@ </itemizedlist> </para> <para> - The function returns 1 when the fixup was successful, - otherwise 0. The return value is used to update the + The function returns true when the fixup was successful, + otherwise false. The return value is used to update the statistics. </para> </sect1> @@ -397,8 +398,8 @@ </itemizedlist> </para> <para> - The function returns 1 when the fixup was successful, - otherwise 0. The return value is used to update the + The function returns true when the fixup was successful, + otherwise false. The return value is used to update the statistics. </para> </sect1> @@ -414,8 +415,8 @@ debug bucket. </para> <para> - The function returns 1 when the fixup was successful, - otherwise 0. The return value is used to update the + The function returns true when the fixup was successful, + otherwise false. The return value is used to update the statistics. </para> <para> @@ -427,7 +428,8 @@ case. The fixup function should check if this is a legitimate case of a statically initialized object or not. In this case only debug_object_init() should be called to make the object known to - the tracker. Then the function should return 0 because this is not + the tracker. Then the function should return false because this + is not a real fixup. </para> </sect1> diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl index 184f3c7b5145..de79efdad46c 100644 --- a/Documentation/DocBook/device-drivers.tmpl +++ b/Documentation/DocBook/device-drivers.tmpl @@ -136,6 +136,8 @@ X!Edrivers/base/interface.c !Iinclude/linux/seqno-fence.h !Edrivers/dma-buf/reservation.c !Iinclude/linux/reservation.h +!Edrivers/dma-buf/sync_file.c +!Iinclude/linux/sync_file.h !Edrivers/base/dma-coherent.c !Edrivers/base/dma-mapping.c </sect1> @@ -233,6 +235,7 @@ X!Isound/sound_firmware.c !Iinclude/media/v4l2-mediabus.h !Iinclude/media/v4l2-mem2mem.h !Iinclude/media/v4l2-of.h +!Iinclude/media/v4l2-rect.h !Iinclude/media/v4l2-subdev.h !Iinclude/media/videobuf2-core.h !Iinclude/media/videobuf2-v4l2.h diff --git a/Documentation/DocBook/gpu.tmpl b/Documentation/DocBook/gpu.tmpl index 1692c4dd5487..4a0c599b6a6d 100644 --- a/Documentation/DocBook/gpu.tmpl +++ b/Documentation/DocBook/gpu.tmpl @@ -1617,6 +1617,11 @@ void intel_crt_init(struct drm_device *dev) !Iinclude/drm/drm_fb_helper.h </sect2> <sect2> + <title>Framebuffer CMA Helper Functions Reference</title> +!Pdrivers/gpu/drm/drm_fb_cma_helper.c framebuffer cma helper functions +!Edrivers/gpu/drm/drm_fb_cma_helper.c + </sect2> + <sect2> <title>Display Port Helper Functions Reference</title> !Pdrivers/gpu/drm/drm_dp_helper.c dp helpers !Iinclude/drm/drm_dp_helper.h @@ -1671,17 +1676,23 @@ void intel_crt_init(struct drm_device *dev) !Pdrivers/gpu/drm/drm_crtc.c Tile group </sect2> <sect2> - <title>Bridges</title> + <title>Bridges</title> <sect3> - <title>Overview</title> + <title>Overview</title> !Pdrivers/gpu/drm/drm_bridge.c overview </sect3> <sect3> - <title>Default bridge callback sequence</title> + <title>Default bridge callback sequence</title> !Pdrivers/gpu/drm/drm_bridge.c bridge callbacks </sect3> !Edrivers/gpu/drm/drm_bridge.c </sect2> + <sect2> + <title>Panel Helper Reference</title> +!Iinclude/drm/drm_panel.h +!Edrivers/gpu/drm/drm_panel.c +!Pdrivers/gpu/drm/drm_panel.c drm panel + </sect2> </sect1> <!-- Internals: kms properties --> @@ -1817,7 +1828,7 @@ void intel_crt_init(struct drm_device *dev) </tr> <tr> <td rowspan="42" valign="top" >DRM</td> - <td valign="top" >Generic</td> + <td rowspan="2" valign="top" >Generic</td> <td valign="top" >“rotation”</td> <td valign="top" >BITMASK</td> <td valign="top" >{ 0, "rotate-0" }, @@ -1832,6 +1843,13 @@ void intel_crt_init(struct drm_device *dev) image along the specified axis prior to rotation</td> </tr> <tr> + <td valign="top" >“scaling mode”</td> + <td valign="top" >ENUM</td> + <td valign="top" >{ "None", "Full", "Center", "Full aspect" }</td> + <td valign="top" >Connector</td> + <td valign="top" >Supported by: amdgpu, gma500, i915, nouveau and radeon.</td> + </tr> + <tr> <td rowspan="5" valign="top" >Connector</td> <td valign="top" >“EDID”</td> <td valign="top" >BLOB | IMMUTABLE</td> @@ -2068,21 +2086,12 @@ void intel_crt_init(struct drm_device *dev) <td valign="top" >property to suggest an Y offset for a connector</td> </tr> <tr> - <td rowspan="8" valign="top" >Optional</td> - <td valign="top" >“scaling mode”</td> - <td valign="top" >ENUM</td> - <td valign="top" >{ "None", "Full", "Center", "Full aspect" }</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> + <td rowspan="7" valign="top" >Optional</td> <td valign="top" >"aspect ratio"</td> <td valign="top" >ENUM</td> <td valign="top" >{ "None", "4:3", "16:9" }</td> <td valign="top" >Connector</td> - <td valign="top" >DRM property to set aspect ratio from user space app. - This enum is made generic to allow addition of custom aspect - ratios.</td> + <td valign="top" >TDB</td> </tr> <tr> <td valign="top" >“dirty”</td> @@ -2153,7 +2162,11 @@ void intel_crt_init(struct drm_device *dev) <td valign="top" >ENUM</td> <td valign="top" >{ "Automatic", "Full", "Limited 16:235" }</td> <td valign="top" >Connector</td> - <td valign="top" >TBD</td> + <td valign="top" >When this property is set to Limited 16:235 + and CTM is set, the hardware will be programmed with the + result of the multiplication of CTM by the limited range + matrix to ensure the pixels normaly in the range 0..1.0 are + remapped to the range 16/255..235/255.</td> </tr> <tr> <td valign="top" >“audio”</td> @@ -3334,7 +3347,7 @@ int num_ioctls;</synopsis> <title>Video BIOS Table (VBT)</title> !Pdrivers/gpu/drm/i915/intel_bios.c Video BIOS Table (VBT) !Idrivers/gpu/drm/i915/intel_bios.c -!Idrivers/gpu/drm/i915/intel_bios.h +!Idrivers/gpu/drm/i915/intel_vbt_defs.h </sect2> </sect1> diff --git a/Documentation/DocBook/media/dvb/net.xml b/Documentation/DocBook/media/dvb/net.xml index d2e44b7e07df..da095ed0b75c 100644 --- a/Documentation/DocBook/media/dvb/net.xml +++ b/Documentation/DocBook/media/dvb/net.xml @@ -15,7 +15,7 @@ that are present on the transport stream. This is done through <constant>/dev/dvb/adapter?/net?</constant> device node. The data will be available via virtual <constant>dvb?_?</constant> - network interfaces, and will be controled/routed via the standard + network interfaces, and will be controlled/routed via the standard ip tools (like ip, route, netstat, ifconfig, etc).</para> <para> Data types and and ioctl definitions are defined via <constant>linux/dvb/net.h</constant> header.</para> diff --git a/Documentation/DocBook/media/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml index 5399e8904715..82fa328abd58 100644 --- a/Documentation/DocBook/media/v4l/compat.xml +++ b/Documentation/DocBook/media/v4l/compat.xml @@ -2686,50 +2686,12 @@ and may change in the future.</para> <itemizedlist> <listitem> - <para>Video Output Overlay (OSD) Interface, <xref - linkend="osd" />.</para> - </listitem> - <listitem> <para>&VIDIOC-DBG-G-REGISTER; and &VIDIOC-DBG-S-REGISTER; ioctls.</para> </listitem> <listitem> <para>&VIDIOC-DBG-G-CHIP-INFO; ioctl.</para> </listitem> - <listitem> - <para>&VIDIOC-ENUM-DV-TIMINGS;, &VIDIOC-QUERY-DV-TIMINGS; and - &VIDIOC-DV-TIMINGS-CAP; ioctls.</para> - </listitem> - <listitem> - <para>Flash API. <xref linkend="flash-controls" /></para> - </listitem> - <listitem> - <para>&VIDIOC-CREATE-BUFS; and &VIDIOC-PREPARE-BUF; ioctls.</para> - </listitem> - <listitem> - <para>Selection API. <xref linkend="selection-api" /></para> - </listitem> - <listitem> - <para>Sub-device selection API: &VIDIOC-SUBDEV-G-SELECTION; - and &VIDIOC-SUBDEV-S-SELECTION; ioctls.</para> - </listitem> - <listitem> - <para>Support for frequency band enumeration: &VIDIOC-ENUM-FREQ-BANDS; ioctl.</para> - </listitem> - <listitem> - <para>Vendor and device specific media bus pixel formats. - <xref linkend="v4l2-mbus-vendor-spec-fmts" />.</para> - </listitem> - <listitem> - <para>Importing DMABUF file descriptors as a new IO method described - in <xref linkend="dmabuf" />.</para> - </listitem> - <listitem> - <para>Exporting DMABUF files using &VIDIOC-EXPBUF; ioctl.</para> - </listitem> - <listitem> - <para>Software Defined Radio (SDR) Interface, <xref linkend="sdr" />.</para> - </listitem> </itemizedlist> </section> diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml index 361040e6b0f4..e2e5484d2d9b 100644 --- a/Documentation/DocBook/media/v4l/controls.xml +++ b/Documentation/DocBook/media/v4l/controls.xml @@ -2841,7 +2841,7 @@ for a GOP and keep it below or equal the set bitrate target. Otherwise the rate overall average bitrate for the stream and keeps it below or equal to the set bitrate. In the first case the average bitrate for the whole stream will be smaller then the set bitrate. This is caused because the average is calculated for smaller number of frames, on the other hand enabling this setting will ensure that -the stream will meet tight bandwidth contraints. Applicable to encoders. +the stream will meet tight bandwidth constraints. Applicable to encoders. </entry> </row> <row><entry></entry></row> @@ -4272,13 +4272,6 @@ manually or automatically if set to zero. Unit, range and step are driver-specif <section id="flash-controls"> <title>Flash Control Reference</title> - <note> - <title>Experimental</title> - - <para>This is an <link linkend="experimental">experimental</link> -interface and may change in the future.</para> - </note> - <para> The V4L2 flash controls are intended to provide generic access to flash controller devices. Flash controller devices are @@ -4743,14 +4736,6 @@ interface and may change in the future.</para> <section id="image-source-controls"> <title>Image Source Control Reference</title> - <note> - <title>Experimental</title> - - <para>This is an <link - linkend="experimental">experimental</link> interface and may - change in the future.</para> - </note> - <para> The Image Source control class is intended for low-level control of image source devices such as image sensors. The @@ -4862,14 +4847,6 @@ interface and may change in the future.</para> <section id="image-process-controls"> <title>Image Process Control Reference</title> - <note> - <title>Experimental</title> - - <para>This is an <link - linkend="experimental">experimental</link> interface and may - change in the future.</para> - </note> - <para> The Image Process control class is intended for low-level control of image processing functions. Unlike @@ -4955,14 +4932,6 @@ interface and may change in the future.</para> <section id="dv-controls"> <title>Digital Video Control Reference</title> - <note> - <title>Experimental</title> - - <para>This is an <link - linkend="experimental">experimental</link> interface and may - change in the future.</para> - </note> - <para> The Digital Video control class is intended to control receivers and transmitters for <ulink url="http://en.wikipedia.org/wiki/Vga">VGA</ulink>, diff --git a/Documentation/DocBook/media/v4l/dev-raw-vbi.xml b/Documentation/DocBook/media/v4l/dev-raw-vbi.xml index f4b61b6ce3c2..78599bbd58f7 100644 --- a/Documentation/DocBook/media/v4l/dev-raw-vbi.xml +++ b/Documentation/DocBook/media/v4l/dev-raw-vbi.xml @@ -85,7 +85,7 @@ initialize all fields of the &v4l2-vbi-format; results of <constant>VIDIOC_G_FMT</constant>, and call the &VIDIOC-S-FMT; ioctl with a pointer to this structure. Drivers return an &EINVAL; only when the given parameters are ambiguous, otherwise -they modify the parameters according to the hardware capabilites and +they modify the parameters according to the hardware capabilities and return the actual parameters. When the driver allocates resources at this point, it may return an &EBUSY; to indicate the returned parameters are valid but the required resources are currently not diff --git a/Documentation/DocBook/media/v4l/dev-sdr.xml b/Documentation/DocBook/media/v4l/dev-sdr.xml index a659771f7b7c..6da1157fb5bd 100644 --- a/Documentation/DocBook/media/v4l/dev-sdr.xml +++ b/Documentation/DocBook/media/v4l/dev-sdr.xml @@ -1,11 +1,5 @@ <title>Software Defined Radio Interface (SDR)</title> - <note> - <title>Experimental</title> - <para>This is an <link linkend="experimental"> experimental </link> - interface and may change in the future.</para> - </note> - <para> SDR is an abbreviation of Software Defined Radio, the radio device which uses application software for modulation or demodulation. This interface diff --git a/Documentation/DocBook/media/v4l/dev-subdev.xml b/Documentation/DocBook/media/v4l/dev-subdev.xml index 4f0ba58c9bd9..f4bc27af83eb 100644 --- a/Documentation/DocBook/media/v4l/dev-subdev.xml +++ b/Documentation/DocBook/media/v4l/dev-subdev.xml @@ -1,11 +1,5 @@ <title>Sub-device Interface</title> - <note> - <title>Experimental</title> - <para>This is an <link linkend="experimental">experimental</link> - interface and may change in the future.</para> - </note> - <para>The complex nature of V4L2 devices, where hardware is often made of several integrated circuits that need to interact with each other in a controlled way, leads to complex V4L2 drivers. The drivers usually reflect diff --git a/Documentation/DocBook/media/v4l/io.xml b/Documentation/DocBook/media/v4l/io.xml index 144158b3a5ac..e09025db92bd 100644 --- a/Documentation/DocBook/media/v4l/io.xml +++ b/Documentation/DocBook/media/v4l/io.xml @@ -475,12 +475,6 @@ rest should be evident.</para> <section id="dmabuf"> <title>Streaming I/O (DMA buffer importing)</title> - <note> - <title>Experimental</title> - <para>This is an <link linkend="experimental">experimental</link> - interface and may change in the future.</para> - </note> - <para>The DMABUF framework provides a generic method for sharing buffers between multiple devices. Device drivers that support DMABUF can export a DMA buffer to userspace as a file descriptor (known as the exporter role), import a diff --git a/Documentation/DocBook/media/v4l/selection-api.xml b/Documentation/DocBook/media/v4l/selection-api.xml index 28cbded766c9..b764cba150d1 100644 --- a/Documentation/DocBook/media/v4l/selection-api.xml +++ b/Documentation/DocBook/media/v4l/selection-api.xml @@ -1,13 +1,6 @@ <section id="selection-api"> - <title>Experimental API for cropping, composing and scaling</title> - - <note> - <title>Experimental</title> - - <para>This is an <link linkend="experimental">experimental</link> -interface and may change in the future.</para> - </note> + <title>API for cropping, composing and scaling</title> <section> <title>Introduction</title> diff --git a/Documentation/DocBook/media/v4l/subdev-formats.xml b/Documentation/DocBook/media/v4l/subdev-formats.xml index 4e73345e3eab..199c84e3aede 100644 --- a/Documentation/DocBook/media/v4l/subdev-formats.xml +++ b/Documentation/DocBook/media/v4l/subdev-formats.xml @@ -4002,12 +4002,6 @@ see <xref linkend="colorspaces" />.</entry> <section id="v4l2-mbus-vendor-spec-fmts"> <title>Vendor and Device Specific Formats</title> - <note> - <title>Experimental</title> - <para>This is an <link linkend="experimental">experimental</link> -interface and may change in the future.</para> - </note> - <para>This section lists complex data formats that are either vendor or device specific. </para> diff --git a/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml b/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml index d81fa0d4016b..6528e97b8990 100644 --- a/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml +++ b/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml @@ -49,12 +49,6 @@ <refsect1> <title>Description</title> - <note> - <title>Experimental</title> - <para>This is an <link linkend="experimental"> experimental </link> - interface and may change in the future.</para> - </note> - <para>This ioctl is used to create buffers for <link linkend="mmap">memory mapped</link> or <link linkend="userp">user pointer</link> or <link linkend="dmabuf">DMA buffer</link> I/O. It can be used as an alternative or in diff --git a/Documentation/DocBook/media/v4l/vidioc-dv-timings-cap.xml b/Documentation/DocBook/media/v4l/vidioc-dv-timings-cap.xml index a2017bfcaed2..ca9ffce9b4c1 100644 --- a/Documentation/DocBook/media/v4l/vidioc-dv-timings-cap.xml +++ b/Documentation/DocBook/media/v4l/vidioc-dv-timings-cap.xml @@ -49,14 +49,9 @@ <refsect1> <title>Description</title> - <note> - <title>Experimental</title> - <para>This is an <link linkend="experimental"> experimental </link> - interface and may change in the future.</para> - </note> - - <para>To query the capabilities of the DV receiver/transmitter applications -can call the <constant>VIDIOC_DV_TIMINGS_CAP</constant> ioctl on a video node + <para>To query the capabilities of the DV receiver/transmitter applications initialize the +<structfield>pad</structfield> field to 0, zero the reserved array of &v4l2-dv-timings-cap; +and call the <constant>VIDIOC_DV_TIMINGS_CAP</constant> ioctl on a video node and the driver will fill in the structure. Note that drivers may return different values after switching the video input or output.</para> @@ -65,8 +60,8 @@ queried by calling the <constant>VIDIOC_SUBDEV_DV_TIMINGS_CAP</constant> ioctl directly on a subdevice node. The capabilities are specific to inputs (for DV receivers) or outputs (for DV transmitters), applications must specify the desired pad number in the &v4l2-dv-timings-cap; <structfield>pad</structfield> -field. Attempts to query capabilities on a pad that doesn't support them will -return an &EINVAL;.</para> +field and zero the <structfield>reserved</structfield> array. Attempts to query +capabilities on a pad that doesn't support them will return an &EINVAL;.</para> <table pgwide="1" frame="none" id="v4l2-bt-timings-cap"> <title>struct <structname>v4l2_bt_timings_cap</structname></title> @@ -145,7 +140,8 @@ return an &EINVAL;.</para> <row> <entry>__u32</entry> <entry><structfield>reserved</structfield>[2]</entry> - <entry>Reserved for future extensions. Drivers must set the array to zero.</entry> + <entry>Reserved for future extensions. Drivers and applications must + set the array to zero.</entry> </row> <row> <entry>union</entry> diff --git a/Documentation/DocBook/media/v4l/vidioc-enum-dv-timings.xml b/Documentation/DocBook/media/v4l/vidioc-enum-dv-timings.xml index 6e3cadd4e1f9..9b3d42018b69 100644 --- a/Documentation/DocBook/media/v4l/vidioc-enum-dv-timings.xml +++ b/Documentation/DocBook/media/v4l/vidioc-enum-dv-timings.xml @@ -49,20 +49,15 @@ <refsect1> <title>Description</title> - <note> - <title>Experimental</title> - <para>This is an <link linkend="experimental"> experimental </link> - interface and may change in the future.</para> - </note> - <para>While some DV receivers or transmitters support a wide range of timings, others support only a limited number of timings. With this ioctl applications can enumerate a list of known supported timings. Call &VIDIOC-DV-TIMINGS-CAP; to check if it also supports other standards or even custom timings that are not in this list.</para> <para>To query the available timings, applications initialize the -<structfield>index</structfield> field and zero the reserved array of &v4l2-enum-dv-timings; -and call the <constant>VIDIOC_ENUM_DV_TIMINGS</constant> ioctl on a video node with a +<structfield>index</structfield> field, set the <structfield>pad</structfield> field to 0, +zero the reserved array of &v4l2-enum-dv-timings; and call the +<constant>VIDIOC_ENUM_DV_TIMINGS</constant> ioctl on a video node with a pointer to this structure. Drivers fill the rest of the structure or return an &EINVAL; when the index is out of bounds. To enumerate all supported DV timings, applications shall begin at index zero, incrementing by one until the diff --git a/Documentation/DocBook/media/v4l/vidioc-enum-freq-bands.xml b/Documentation/DocBook/media/v4l/vidioc-enum-freq-bands.xml index 4e8ea65f7282..a0608abc1ab8 100644 --- a/Documentation/DocBook/media/v4l/vidioc-enum-freq-bands.xml +++ b/Documentation/DocBook/media/v4l/vidioc-enum-freq-bands.xml @@ -49,12 +49,6 @@ <refsect1> <title>Description</title> - <note> - <title>Experimental</title> - <para>This is an <link linkend="experimental"> experimental </link> - interface and may change in the future.</para> - </note> - <para>Enumerates the frequency bands that a tuner or modulator supports. To do this applications initialize the <structfield>tuner</structfield>, <structfield>type</structfield> and <structfield>index</structfield> fields, diff --git a/Documentation/DocBook/media/v4l/vidioc-expbuf.xml b/Documentation/DocBook/media/v4l/vidioc-expbuf.xml index 0ae0b6a915d0..a6558a676ef3 100644 --- a/Documentation/DocBook/media/v4l/vidioc-expbuf.xml +++ b/Documentation/DocBook/media/v4l/vidioc-expbuf.xml @@ -49,12 +49,6 @@ <refsect1> <title>Description</title> - <note> - <title>Experimental</title> - <para>This is an <link linkend="experimental"> experimental </link> - interface and may change in the future.</para> - </note> - <para>This ioctl is an extension to the <link linkend="mmap">memory mapping</link> I/O method, therefore it is available only for <constant>V4L2_MEMORY_MMAP</constant> buffers. It can be used to export a diff --git a/Documentation/DocBook/media/v4l/vidioc-g-edid.xml b/Documentation/DocBook/media/v4l/vidioc-g-edid.xml index 2702536bbc7c..b7602d30f596 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-edid.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-edid.xml @@ -1,6 +1,6 @@ <refentry id="vidioc-g-edid"> <refmeta> - <refentrytitle>ioctl VIDIOC_G_EDID, VIDIOC_S_EDID</refentrytitle> + <refentrytitle>ioctl VIDIOC_G_EDID, VIDIOC_S_EDID, VIDIOC_SUBDEV_G_EDID, VIDIOC_SUBDEV_S_EDID</refentrytitle> &manvol; </refmeta> @@ -71,7 +71,8 @@ <para>To get the EDID data the application has to fill in the <structfield>pad</structfield>, <structfield>start_block</structfield>, <structfield>blocks</structfield> and <structfield>edid</structfield> - fields and call <constant>VIDIOC_G_EDID</constant>. The current EDID from block + fields, zero the <structfield>reserved</structfield> array and call + <constant>VIDIOC_G_EDID</constant>. The current EDID from block <structfield>start_block</structfield> and of size <structfield>blocks</structfield> will be placed in the memory <structfield>edid</structfield> points to. The <structfield>edid</structfield> pointer must point to memory at least <structfield>blocks</structfield> * 128 bytes @@ -92,8 +93,9 @@ the driver will set <structfield>blocks</structfield> to 0 and it returns 0.</para> <para>To set the EDID blocks of a receiver the application has to fill in the <structfield>pad</structfield>, - <structfield>blocks</structfield> and <structfield>edid</structfield> fields and set - <structfield>start_block</structfield> to 0. It is not possible to set part of an EDID, + <structfield>blocks</structfield> and <structfield>edid</structfield> fields, set + <structfield>start_block</structfield> to 0 and zero the <structfield>reserved</structfield> array. + It is not possible to set part of an EDID, it is always all or nothing. Setting the EDID data is only valid for receivers as it makes no sense for a transmitter.</para> diff --git a/Documentation/DocBook/media/v4l/vidioc-g-selection.xml b/Documentation/DocBook/media/v4l/vidioc-g-selection.xml index 7865351688da..997f4e96f297 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-selection.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-selection.xml @@ -50,12 +50,6 @@ <refsect1> <title>Description</title> - <note> - <title>Experimental</title> - <para>This is an <link linkend="experimental"> experimental </link> - interface and may change in the future.</para> - </note> - <para>The ioctls are used to query and configure selection rectangles.</para> <para>To query the cropping (composing) rectangle set &v4l2-selection; @@ -222,7 +216,7 @@ or the <structfield>flags</structfield> argument is not valid.</para> <term><errorcode>ERANGE</errorcode></term> <listitem> <para>It is not possible to adjust &v4l2-rect; <structfield> -r</structfield> rectangle to satisfy all contraints given in the +r</structfield> rectangle to satisfy all constraints given in the <structfield>flags</structfield> argument.</para> </listitem> </varlistentry> diff --git a/Documentation/DocBook/media/v4l/vidioc-prepare-buf.xml b/Documentation/DocBook/media/v4l/vidioc-prepare-buf.xml index fa7ad7e33228..7bde698760e4 100644 --- a/Documentation/DocBook/media/v4l/vidioc-prepare-buf.xml +++ b/Documentation/DocBook/media/v4l/vidioc-prepare-buf.xml @@ -48,12 +48,6 @@ <refsect1> <title>Description</title> - <note> - <title>Experimental</title> - <para>This is an <link linkend="experimental"> experimental </link> - interface and may change in the future.</para> - </note> - <para>Applications can optionally call the <constant>VIDIOC_PREPARE_BUF</constant> ioctl to pass ownership of the buffer to the driver before actually enqueuing it, using the diff --git a/Documentation/DocBook/media/v4l/vidioc-query-dv-timings.xml b/Documentation/DocBook/media/v4l/vidioc-query-dv-timings.xml index 0c93677d16b4..d41bf47ee5a2 100644 --- a/Documentation/DocBook/media/v4l/vidioc-query-dv-timings.xml +++ b/Documentation/DocBook/media/v4l/vidioc-query-dv-timings.xml @@ -50,12 +50,6 @@ input</refpurpose> <refsect1> <title>Description</title> - <note> - <title>Experimental</title> - <para>This is an <link linkend="experimental"> experimental </link> - interface and may change in the future.</para> - </note> - <para>The hardware may be able to detect the current DV timings automatically, similar to sensing the video standard. To do so, applications call <constant>VIDIOC_QUERY_DV_TIMINGS</constant> with a pointer to a diff --git a/Documentation/DocBook/media/v4l/vidioc-streamon.xml b/Documentation/DocBook/media/v4l/vidioc-streamon.xml index df2c63d07bac..89fd7ce964f9 100644 --- a/Documentation/DocBook/media/v4l/vidioc-streamon.xml +++ b/Documentation/DocBook/media/v4l/vidioc-streamon.xml @@ -123,6 +123,14 @@ synchronize with other events.</para> </para> </listitem> </varlistentry> + <varlistentry> + <term><errorcode>ENOLINK</errorcode></term> + <listitem> + <para>The driver implements Media Controller interface and + the pipeline link configuration is invalid. + </para> + </listitem> + </varlistentry> </variablelist> </refsect1> </refentry> diff --git a/Documentation/DocBook/media/v4l/vidioc-subdev-enum-frame-interval.xml b/Documentation/DocBook/media/v4l/vidioc-subdev-enum-frame-interval.xml index cff59f5cbf04..9d0251a27e5f 100644 --- a/Documentation/DocBook/media/v4l/vidioc-subdev-enum-frame-interval.xml +++ b/Documentation/DocBook/media/v4l/vidioc-subdev-enum-frame-interval.xml @@ -49,12 +49,6 @@ <refsect1> <title>Description</title> - <note> - <title>Experimental</title> - <para>This is an <link linkend="experimental">experimental</link> - interface and may change in the future.</para> - </note> - <para>This ioctl lets applications enumerate available frame intervals on a given sub-device pad. Frame intervals only makes sense for sub-devices that can control the frame period on their own. This includes, for instance, diff --git a/Documentation/DocBook/media/v4l/vidioc-subdev-enum-frame-size.xml b/Documentation/DocBook/media/v4l/vidioc-subdev-enum-frame-size.xml index abd545ede67a..9b91b8332ba9 100644 --- a/Documentation/DocBook/media/v4l/vidioc-subdev-enum-frame-size.xml +++ b/Documentation/DocBook/media/v4l/vidioc-subdev-enum-frame-size.xml @@ -49,12 +49,6 @@ <refsect1> <title>Description</title> - <note> - <title>Experimental</title> - <para>This is an <link linkend="experimental">experimental</link> - interface and may change in the future.</para> - </note> - <para>This ioctl allows applications to enumerate all frame sizes supported by a sub-device on the given pad for the given media bus format. Supported formats can be retrieved with the &VIDIOC-SUBDEV-ENUM-MBUS-CODE; diff --git a/Documentation/DocBook/media/v4l/vidioc-subdev-enum-mbus-code.xml b/Documentation/DocBook/media/v4l/vidioc-subdev-enum-mbus-code.xml index 0bcb278fd062..c67256ada87a 100644 --- a/Documentation/DocBook/media/v4l/vidioc-subdev-enum-mbus-code.xml +++ b/Documentation/DocBook/media/v4l/vidioc-subdev-enum-mbus-code.xml @@ -49,12 +49,6 @@ <refsect1> <title>Description</title> - <note> - <title>Experimental</title> - <para>This is an <link linkend="experimental">experimental</link> - interface and may change in the future.</para> - </note> - <para>To enumerate media bus formats available at a given sub-device pad applications initialize the <structfield>pad</structfield>, <structfield>which</structfield> and <structfield>index</structfield> fields of &v4l2-subdev-mbus-code-enum; and diff --git a/Documentation/DocBook/media/v4l/vidioc-subdev-g-fmt.xml b/Documentation/DocBook/media/v4l/vidioc-subdev-g-fmt.xml index a67cde6f8c54..781089cba453 100644 --- a/Documentation/DocBook/media/v4l/vidioc-subdev-g-fmt.xml +++ b/Documentation/DocBook/media/v4l/vidioc-subdev-g-fmt.xml @@ -50,12 +50,6 @@ <refsect1> <title>Description</title> - <note> - <title>Experimental</title> - <para>This is an <link linkend="experimental">experimental</link> - interface and may change in the future.</para> - </note> - <para>These ioctls are used to negotiate the frame format at specific subdev pads in the image pipeline.</para> diff --git a/Documentation/DocBook/media/v4l/vidioc-subdev-g-frame-interval.xml b/Documentation/DocBook/media/v4l/vidioc-subdev-g-frame-interval.xml index 0bc3ea22d31f..848ec789ddaa 100644 --- a/Documentation/DocBook/media/v4l/vidioc-subdev-g-frame-interval.xml +++ b/Documentation/DocBook/media/v4l/vidioc-subdev-g-frame-interval.xml @@ -50,12 +50,6 @@ <refsect1> <title>Description</title> - <note> - <title>Experimental</title> - <para>This is an <link linkend="experimental">experimental</link> - interface and may change in the future.</para> - </note> - <para>These ioctls are used to get and set the frame interval at specific subdev pads in the image pipeline. The frame interval only makes sense for sub-devices that can control the frame period on their own. This includes, diff --git a/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml b/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml index c62a7360719b..8346b2e4a703 100644 --- a/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml +++ b/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml @@ -49,12 +49,6 @@ <refsect1> <title>Description</title> - <note> - <title>Experimental</title> - <para>This is an <link linkend="experimental">experimental</link> - interface and may change in the future.</para> - </note> - <para>The selections are used to configure various image processing functionality performed by the subdevs which affect the image size. This currently includes cropping, scaling and diff --git a/Documentation/IRQ-domain.txt b/Documentation/IRQ-domain.txt index 8d990bde8693..82001a25a14b 100644 --- a/Documentation/IRQ-domain.txt +++ b/Documentation/IRQ-domain.txt @@ -70,6 +70,7 @@ of the reverse map types are described below: ==== Linear ==== irq_domain_add_linear() +irq_domain_create_linear() The linear reverse map maintains a fixed size table indexed by the hwirq number. When a hwirq is mapped, an irq_desc is allocated for @@ -81,10 +82,16 @@ map are fixed time lookup for IRQ numbers, and irq_descs are only allocated for in-use IRQs. The disadvantage is that the table must be as large as the largest possible hwirq number. +irq_domain_add_linear() and irq_domain_create_linear() are functionally +equivalent, except for the first argument is different - the former +accepts an Open Firmware specific 'struct device_node', while the latter +accepts a more general abstraction 'struct fwnode_handle'. + The majority of drivers should use the linear map. ==== Tree ==== irq_domain_add_tree() +irq_domain_create_tree() The irq_domain maintains a radix tree map from hwirq numbers to Linux IRQs. When an hwirq is mapped, an irq_desc is allocated and the @@ -95,6 +102,11 @@ since it doesn't need to allocate a table as large as the largest hwirq number. The disadvantage is that hwirq to IRQ number lookup is dependent on how many entries are in the table. +irq_domain_add_tree() and irq_domain_create_tree() are functionally +equivalent, except for the first argument is different - the former +accepts an Open Firmware specific 'struct device_node', while the latter +accepts a more general abstraction 'struct fwnode_handle'. + Very few drivers should need this mapping. ==== No Map ===- diff --git a/Documentation/Makefile b/Documentation/Makefile index 1207d7907650..de955e151af8 100644 --- a/Documentation/Makefile +++ b/Documentation/Makefile @@ -1,4 +1,3 @@ -subdir-y := accounting auxdisplay blackfin connector \ +subdir-y := accounting auxdisplay blackfin \ filesystems filesystems ia64 laptops mic misc-devices \ - networking pcmcia prctl ptp timers vDSO video4linux \ - watchdog + networking pcmcia prctl ptp timers vDSO watchdog diff --git a/Documentation/RCU/Design/Data-Structures/BigTreeClassicRCU.svg b/Documentation/RCU/Design/Data-Structures/BigTreeClassicRCU.svg new file mode 100644 index 000000000000..727e270b11e4 --- /dev/null +++ b/Documentation/RCU/Design/Data-Structures/BigTreeClassicRCU.svg @@ -0,0 +1,474 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- Creator: fig2dev Version 3.2 Patchlevel 5e --> + +<!-- CreationDate: Wed Dec 9 17:28:20 2015 --> + +<!-- Magnification: 3.000 --> + +<svg + xmlns:dc="http://purl.org/dc/elements/1.1/" + xmlns:cc="http://creativecommons.org/ns#" + xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" + xmlns:svg="http://www.w3.org/2000/svg" + xmlns="http://www.w3.org/2000/svg" + xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" + xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" + width="9.1in" + height="8.9in" + viewBox="-66 -66 10932 10707" + id="svg2" + version="1.1" + inkscape:version="0.48.4 r9939" + sodipodi:docname="BigTreeClassicRCU.fig"> + <metadata + id="metadata106"> + <rdf:RDF> + <cc:Work + rdf:about=""> + <dc:format>image/svg+xml</dc:format> + <dc:type + rdf:resource="http://purl.org/dc/dcmitype/StillImage" /> + <dc:title></dc:title> + </cc:Work> + </rdf:RDF> + </metadata> + <defs + id="defs104"> + <marker + inkscape:stockid="Arrow1Mend" + orient="auto" + refY="0.0" + refX="0.0" + id="Arrow1Mend" + style="overflow:visible;"> + <path + id="path3864" + d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z " + style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;" + transform="scale(0.4) rotate(180) translate(10,0)" /> + </marker> + </defs> + <sodipodi:namedview + pagecolor="#ffffff" + bordercolor="#666666" + borderopacity="1" + objecttolerance="10" + gridtolerance="10" + guidetolerance="10" + inkscape:pageopacity="0" + inkscape:pageshadow="2" + inkscape:window-width="973" + inkscape:window-height="1137" + id="namedview102" + showgrid="false" + inkscape:zoom="0.9743589" + inkscape:cx="409.50003" + inkscape:cy="400.49997" + inkscape:window-x="915" + inkscape:window-y="24" + inkscape:window-maximized="0" + inkscape:current-layer="g4" /> + <g + style="stroke-width:.025in; fill:none" + id="g4"> + <!-- Line: box --> + <rect + x="0" + y="0" + width="10800" + height="5625" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffff00; " + id="rect6" /> + <!-- Line: box --> + <rect + x="1125" + y="3600" + width="2700" + height="1350" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect8" /> + <!-- Line: box --> + <rect + x="3825" + y="900" + width="2700" + height="1350" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect10" /> + <!-- Line: box --> + <rect + x="6525" + y="3600" + width="2700" + height="1350" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect12" /> + <!-- Line --> + <polyline + points="3375,6525 3375,5046 " + style="stroke:#00d1d1;stroke-width:44.9934641;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline14" /> + <!-- Arrowhead on XXXpoint 3375 6525 - 3375 4860--> + <!-- Circle --> + <circle + cx="7425" + cy="6075" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle18" /> + <!-- Circle --> + <circle + cx="7875" + cy="6075" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle20" /> + <!-- Circle --> + <circle + cx="8325" + cy="6075" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle22" /> + <!-- Circle --> + <circle + cx="2025" + cy="6075" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle24" /> + <!-- Circle --> + <circle + cx="2475" + cy="6075" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle26" /> + <!-- Circle --> + <circle + cx="2925" + cy="6075" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle28" /> + <!-- Circle --> + <circle + cx="4725" + cy="4275" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle30" /> + <!-- Circle --> + <circle + cx="5175" + cy="4275" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle32" /> + <!-- Circle --> + <circle + cx="5625" + cy="4275" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle34" /> + <!-- Line: box --> + <rect + x="2025" + y="6525" + width="2700" + height="1800" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; " + id="rect36" /> + <!-- Line --> + <polyline + points="2475,3600 3975,2310 " + style="stroke:#00d1d1;stroke-width:44.9934641;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline38" /> + <!-- Arrowhead on XXXpoint 2475 3600 - 4116 2190--> + <!-- Line --> + <polyline + points="7875,3600 6372,2310 " + style="stroke:#00d1d1;stroke-width:44.9934641;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline42" /> + <!-- Arrowhead on XXXpoint 7875 3600 - 6231 2190--> + <!-- Line --> + <polyline + points="6975,8775 6975,5046 " + style="stroke:#00d1d1;stroke-width:44.9934641;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline46" /> + <!-- Arrowhead on XXXpoint 6975 8775 - 6975 4860--> + <!-- Line --> + <polyline + points="1575,8775 1575,5046 " + style="stroke:#00d1d1;stroke-width:44.9934641;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline50" /> + <!-- Arrowhead on XXXpoint 1575 8775 - 1575 4860--> + <!-- Line --> + <polyline + points="8775,6525 8775,5046 " + style="stroke:#00d1d1;stroke-width:44.9934641;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline54" /> + <!-- Arrowhead on XXXpoint 8775 6525 - 8775 4860--> + <!-- Text --> + <text + xml:space="preserve" + x="1575" + y="9225" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text58">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="1575" + y="9675" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text60">rcu_data</text> + <!-- Text --> + <text + xml:space="preserve" + x="1575" + y="10350" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="324" + text-anchor="middle" + id="text62">CPU 0</text> + <!-- Text --> + <text + xml:space="preserve" + x="3375" + y="6975" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text64">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="3375" + y="7425" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text66">rcu_data</text> + <!-- Text --> + <text + xml:space="preserve" + x="3375" + y="8100" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="324" + text-anchor="middle" + id="text68">CPU 15</text> + <!-- Text --> + <text + xml:space="preserve" + x="6975" + y="9225" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text70">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="6975" + y="9675" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text72">rcu_data</text> + <!-- Text --> + <text + xml:space="preserve" + x="6975" + y="10350" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="324" + text-anchor="middle" + id="text74">CPU 1007</text> + <!-- Text --> + <text + xml:space="preserve" + x="8730" + y="6930" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text76">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="8730" + y="7380" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text78">rcu_data</text> + <!-- Text --> + <text + xml:space="preserve" + x="8730" + y="8055" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="324" + text-anchor="middle" + id="text80">CPU 1023</text> + <!-- Text --> + <text + xml:space="preserve" + x="225" + y="450" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="start" + id="text82">struct rcu_state</text> + <!-- Text --> + <text + xml:space="preserve" + x="2475" + y="4050" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text84">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="2475" + y="4500" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text86">rcu_node</text> + <!-- Text --> + <text + xml:space="preserve" + x="7875" + y="4500" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text88">rcu_node</text> + <!-- Text --> + <text + xml:space="preserve" + x="7875" + y="4050" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text90">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="5175" + y="1350" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text92">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="5175" + y="1800" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text94">rcu_node</text> + <!-- Line: box --> + <rect + x="225" + y="8775" + width="2700" + height="1800" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; " + id="rect96" /> + <!-- Line: box --> + <rect + x="5625" + y="8775" + width="2700" + height="1800" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; " + id="rect98" /> + <!-- Line: box --> + <rect + x="7380" + y="6480" + width="2700" + height="1800" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; " + id="rect100" /> + </g> +</svg> diff --git a/Documentation/RCU/Design/Data-Structures/BigTreeClassicRCUBH.svg b/Documentation/RCU/Design/Data-Structures/BigTreeClassicRCUBH.svg new file mode 100644 index 000000000000..9bbb1944f962 --- /dev/null +++ b/Documentation/RCU/Design/Data-Structures/BigTreeClassicRCUBH.svg @@ -0,0 +1,499 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- Creator: fig2dev Version 3.2 Patchlevel 5e --> + +<!-- CreationDate: Wed Dec 9 17:26:09 2015 --> + +<!-- Magnification: 2.000 --> + +<svg + xmlns:dc="http://purl.org/dc/elements/1.1/" + xmlns:cc="http://creativecommons.org/ns#" + xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" + xmlns:svg="http://www.w3.org/2000/svg" + xmlns="http://www.w3.org/2000/svg" + xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" + xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" + width="5.7in" + height="6.6in" + viewBox="-44 -44 6838 7888" + id="svg2" + version="1.1" + inkscape:version="0.48.4 r9939" + sodipodi:docname="BigTreeClassicRCUBH.fig"> + <metadata + id="metadata110"> + <rdf:RDF> + <cc:Work + rdf:about=""> + <dc:format>image/svg+xml</dc:format> + <dc:type + rdf:resource="http://purl.org/dc/dcmitype/StillImage" /> + <dc:title></dc:title> + </cc:Work> + </rdf:RDF> + </metadata> + <defs + id="defs108"> + <marker + inkscape:stockid="Arrow1Mend" + orient="auto" + refY="0.0" + refX="0.0" + id="Arrow1Mend" + style="overflow:visible;"> + <path + id="path3868" + d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z " + style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;" + transform="scale(0.4) rotate(180) translate(10,0)" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0.0" + refX="0.0" + id="Arrow2Mend" + style="overflow:visible;"> + <path + id="path3886" + style="fill-rule:evenodd;stroke-width:0.62500000;stroke-linejoin:round;" + d="M 8.7185878,4.0337352 L -2.2072895,0.016013256 L 8.7185884,-4.0017078 C 6.9730900,-1.6296469 6.9831476,1.6157441 8.7185878,4.0337352 z " + transform="scale(0.6) rotate(180) translate(0,0)" /> + </marker> + </defs> + <sodipodi:namedview + pagecolor="#ffffff" + bordercolor="#666666" + borderopacity="1" + objecttolerance="10" + gridtolerance="10" + guidetolerance="10" + inkscape:pageopacity="0" + inkscape:pageshadow="2" + inkscape:window-width="878" + inkscape:window-height="1148" + id="namedview106" + showgrid="false" + inkscape:zoom="1.3547758" + inkscape:cx="256.5" + inkscape:cy="297" + inkscape:window-x="45" + inkscape:window-y="24" + inkscape:window-maximized="0" + inkscape:current-layer="g4" /> + <g + style="stroke-width:.025in; fill:none" + id="g4"> + <!-- Line: box --> + <rect + x="450" + y="0" + width="6300" + height="7350" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffffff; " + id="rect6" /> + <!-- Line: box --> + <rect + x="4950" + y="4950" + width="1500" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + id="rect8" /> + <!-- Line: box --> + <rect + x="750" + y="600" + width="5700" + height="3750" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffff00; " + id="rect10" /> + <!-- Line: box --> + <rect + x="0" + y="450" + width="6300" + height="7350" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffffff; " + id="rect12" /> + <!-- Line: box --> + <rect + x="300" + y="1050" + width="5700" + height="3750" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffff00; " + id="rect14" /> + <!-- Circle --> + <circle + cx="2850" + cy="3900" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle16" /> + <!-- Circle --> + <circle + cx="3150" + cy="3900" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle18" /> + <!-- Circle --> + <circle + cx="3450" + cy="3900" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle20" /> + <!-- Circle --> + <circle + cx="1350" + cy="5100" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle22" /> + <!-- Circle --> + <circle + cx="1650" + cy="5100" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle24" /> + <!-- Circle --> + <circle + cx="1950" + cy="5100" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle26" /> + <!-- Circle --> + <circle + cx="4350" + cy="5100" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle28" /> + <!-- Circle --> + <circle + cx="4650" + cy="5100" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle30" /> + <!-- Circle --> + <circle + cx="4950" + cy="5100" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle32" /> + <!-- Line --> + <polyline + points="1350,3450 2350,2590 " + style="stroke:#00d1d1;stroke-width:30.0045575;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline34" /> + <!-- Arrowhead on XXXpoint 1350 3450 - 2444 2510--> + <!-- Line --> + <polyline + points="4950,3450 3948,2590 " + style="stroke:#00d1d1;stroke-width:30.0045575;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline38" /> + <!-- Arrowhead on XXXpoint 4950 3450 - 3854 2510--> + <!-- Line: box --> + <rect + x="750" + y="3450" + width="1800" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect42" /> + <!-- Line --> + <polyline + points="2250,5400 2250,4414 " + style="stroke:#00d1d1;stroke-width:30.0045575;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline44" /> + <!-- Arrowhead on XXXpoint 2250 5400 - 2250 4290--> + <!-- Line: box --> + <rect + x="1500" + y="5400" + width="1500" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + id="rect48" /> + <!-- Line: box --> + <rect + x="300" + y="6600" + width="1500" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + id="rect50" /> + <!-- Line: box --> + <rect + x="3750" + y="3450" + width="1800" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect52" /> + <!-- Line: box --> + <rect + x="4500" + y="5400" + width="1500" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + id="rect54" /> + <!-- Line: box --> + <rect + x="3300" + y="6600" + width="1500" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + id="rect56" /> + <!-- Line: box --> + <rect + x="2250" + y="1650" + width="1800" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect58" /> + <!-- Text --> + <text + xml:space="preserve" + x="6450" + y="300" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="192" + text-anchor="end" + id="text60">rcu_bh</text> + <!-- Text --> + <text + xml:space="preserve" + x="3150" + y="1950" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text62">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="3150" + y="2250" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text64">rcu_node</text> + <!-- Text --> + <text + xml:space="preserve" + x="1650" + y="3750" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text66">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="1650" + y="4050" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text68">rcu_node</text> + <!-- Text --> + <text + xml:space="preserve" + x="4650" + y="4050" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text70">rcu_node</text> + <!-- Text --> + <text + xml:space="preserve" + x="4650" + y="3750" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text72">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="2250" + y="5700" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text74">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="2250" + y="6000" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text76">rcu_data</text> + <!-- Text --> + <text + xml:space="preserve" + x="1050" + y="6900" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text78">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="1050" + y="7200" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text80">rcu_data</text> + <!-- Text --> + <text + xml:space="preserve" + x="5250" + y="5700" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text82">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="5250" + y="6000" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text84">rcu_data</text> + <!-- Text --> + <text + xml:space="preserve" + x="4050" + y="6900" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text86">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="4050" + y="7200" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text88">rcu_data</text> + <!-- Text --> + <text + xml:space="preserve" + x="450" + y="1350" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="start" + id="text90">struct rcu_state</text> + <!-- Text --> + <text + xml:space="preserve" + x="6000" + y="750" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="192" + text-anchor="end" + id="text92">rcu_sched</text> + <!-- Line --> + <polyline + points="5250,5400 5250,4414 " + style="stroke:#00d1d1;stroke-width:30.0045575;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline94" /> + <!-- Arrowhead on XXXpoint 5250 5400 - 5250 4290--> + <!-- Line --> + <polyline + points="4050,6600 4050,4414 " + style="stroke:#00d1d1;stroke-width:30.0045575;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline98" /> + <!-- Arrowhead on XXXpoint 4050 6600 - 4050 4290--> + <!-- Line --> + <polyline + points="1050,6600 1050,4414 " + style="stroke:#00d1d1;stroke-width:30.0045575;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline102" /> + <!-- Arrowhead on XXXpoint 1050 6600 - 1050 4290--> + </g> +</svg> diff --git a/Documentation/RCU/Design/Data-Structures/BigTreeClassicRCUBHdyntick.svg b/Documentation/RCU/Design/Data-Structures/BigTreeClassicRCUBHdyntick.svg new file mode 100644 index 000000000000..21ba7823479d --- /dev/null +++ b/Documentation/RCU/Design/Data-Structures/BigTreeClassicRCUBHdyntick.svg @@ -0,0 +1,695 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- Creator: fig2dev Version 3.2 Patchlevel 5e --> + +<!-- CreationDate: Wed Dec 9 17:20:02 2015 --> + +<!-- Magnification: 2.000 --> + +<svg + xmlns:dc="http://purl.org/dc/elements/1.1/" + xmlns:cc="http://creativecommons.org/ns#" + xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" + xmlns:svg="http://www.w3.org/2000/svg" + xmlns="http://www.w3.org/2000/svg" + xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" + xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" + width="5.7in" + height="8.6in" + viewBox="-44 -44 6838 10288" + id="svg2" + version="1.1" + inkscape:version="0.48.4 r9939" + sodipodi:docname="BigTreeClassicRCUBHdyntick.fig"> + <metadata + id="metadata166"> + <rdf:RDF> + <cc:Work + rdf:about=""> + <dc:format>image/svg+xml</dc:format> + <dc:type + rdf:resource="http://purl.org/dc/dcmitype/StillImage" /> + <dc:title></dc:title> + </cc:Work> + </rdf:RDF> + </metadata> + <defs + id="defs164"> + <marker + inkscape:stockid="Arrow1Mend" + orient="auto" + refY="0.0" + refX="0.0" + id="Arrow1Mend" + style="overflow:visible;"> + <path + id="path3924" + d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z " + style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;" + transform="scale(0.4) rotate(180) translate(10,0)" /> + </marker> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0.0" + refX="0.0" + id="Arrow2Lend" + style="overflow:visible;"> + <path + id="path3936" + style="fill-rule:evenodd;stroke-width:0.62500000;stroke-linejoin:round;" + d="M 8.7185878,4.0337352 L -2.2072895,0.016013256 L 8.7185884,-4.0017078 C 6.9730900,-1.6296469 6.9831476,1.6157441 8.7185878,4.0337352 z " + transform="scale(1.1) rotate(180) translate(1,0)" /> + </marker> + </defs> + <sodipodi:namedview + pagecolor="#ffffff" + bordercolor="#666666" + borderopacity="1" + objecttolerance="10" + gridtolerance="10" + guidetolerance="10" + inkscape:pageopacity="0" + inkscape:pageshadow="2" + inkscape:window-width="845" + inkscape:window-height="988" + id="namedview162" + showgrid="false" + inkscape:zoom="1.0452196" + inkscape:cx="256.5" + inkscape:cy="387.00003" + inkscape:window-x="356" + inkscape:window-y="61" + inkscape:window-maximized="0" + inkscape:current-layer="g4" /> + <g + style="stroke-width:.025in; fill:none" + id="g4"> + <!-- Line: box --> + <rect + x="450" + y="0" + width="6300" + height="7350" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffffff; " + id="rect6" /> + <!-- Line: box --> + <rect + x="4950" + y="4950" + width="1500" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + id="rect8" /> + <!-- Line: box --> + <rect + x="750" + y="600" + width="5700" + height="3750" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffff00; " + id="rect10" /> + <!-- Line --> + <polyline + points="5250,8100 5688,5912 " + style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " + id="polyline12" /> + <!-- Arrowhead on XXXpoint 5250 8100 - 5710 5790--> + <polyline + points="5714 6068 5704 5822 5598 6044 " + style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " + id="polyline14" /> + <!-- Line --> + <polyline + points="4050,9300 4486,7262 " + style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " + id="polyline16" /> + <!-- Arrowhead on XXXpoint 4050 9300 - 4512 7140--> + <polyline + points="4514 7418 4506 7172 4396 7394 " + style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " + id="polyline18" /> + <!-- Line --> + <polyline + points="1040,9300 1476,7262 " + style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " + id="polyline20" /> + <!-- Arrowhead on XXXpoint 1040 9300 - 1502 7140--> + <polyline + points="1504 7418 1496 7172 1386 7394 " + style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " + id="polyline22" /> + <!-- Line --> + <polyline + points="2240,8100 2676,6062 " + style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " + id="polyline24" /> + <!-- Arrowhead on XXXpoint 2240 8100 - 2702 5940--> + <polyline + points="2704 6218 2696 5972 2586 6194 " + style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " + id="polyline26" /> + <!-- Line: box --> + <rect + x="0" + y="450" + width="6300" + height="7350" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffffff; " + id="rect28" /> + <!-- Line: box --> + <rect + x="300" + y="1050" + width="5700" + height="3750" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffff00; " + id="rect30" /> + <!-- Line --> + <polyline + points="1350,3450 2350,2590 " + style="stroke:#00d1d1;stroke-width:30.0045575;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline32" /> + <!-- Arrowhead on XXXpoint 1350 3450 - 2444 2510--> + <!-- Line --> + <polyline + points="4950,3450 3948,2590 " + style="stroke:#00d1d1;stroke-width:30.0045575;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline36" /> + <!-- Arrowhead on XXXpoint 4950 3450 - 3854 2510--> + <!-- Line --> + <polyline + points="4050,6600 4050,4414 " + style="stroke:#00d1d1;stroke-width:30.00455750000000066;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline40" /> + <!-- Arrowhead on XXXpoint 4050 6600 - 4050 4290--> + <!-- Line --> + <polyline + points="1050,6600 1050,4414 " + style="stroke:#00d1d1;stroke-width:30.00455750000000066;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline44" /> + <!-- Arrowhead on XXXpoint 1050 6600 - 1050 4290--> + <!-- Line --> + <polyline + points="2250,5400 2250,4414 " + style="stroke:#00d1d1;stroke-width:30.00455750000000066;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline48" /> + <!-- Arrowhead on XXXpoint 2250 5400 - 2250 4290--> + <!-- Line --> + <polyline + points="2250,8100 2250,6364 " + style="stroke:#00ff00;stroke-width:30;stroke-linejoin:miter;stroke-linecap:butt;marker-end:url(#Arrow1Mend)" + id="polyline52" /> + <!-- Arrowhead on XXXpoint 2250 8100 - 2250 6240--> + <!-- Line --> + <polyline + points="1050,9300 1050,7564 " + style="stroke:#00ff00;stroke-width:30;stroke-linejoin:miter;stroke-linecap:butt;marker-end:url(#Arrow1Mend)" + id="polyline56" /> + <!-- Arrowhead on XXXpoint 1050 9300 - 1050 7440--> + <!-- Line --> + <polyline + points="4050,9300 4050,7564 " + style="stroke:#00ff00;stroke-width:30;stroke-linejoin:miter;stroke-linecap:butt;marker-end:url(#Arrow1Mend)" + id="polyline60" /> + <!-- Arrowhead on XXXpoint 4050 9300 - 4050 7440--> + <!-- Line --> + <polyline + points="5250,8100 5250,6364 " + style="stroke:#00ff00;stroke-width:30;stroke-linejoin:miter;stroke-linecap:butt;marker-end:url(#Arrow1Mend)" + id="polyline64" /> + <!-- Arrowhead on XXXpoint 5250 8100 - 5250 6240--> + <!-- Circle --> + <circle + cx="2850" + cy="3900" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle68" /> + <!-- Circle --> + <circle + cx="3150" + cy="3900" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle70" /> + <!-- Circle --> + <circle + cx="3450" + cy="3900" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle72" /> + <!-- Circle --> + <circle + cx="1350" + cy="5100" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle74" /> + <!-- Circle --> + <circle + cx="1650" + cy="5100" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle76" /> + <!-- Circle --> + <circle + cx="1950" + cy="5100" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle78" /> + <!-- Circle --> + <circle + cx="4350" + cy="5100" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle80" /> + <!-- Circle --> + <circle + cx="4650" + cy="5100" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle82" /> + <!-- Circle --> + <circle + cx="4950" + cy="5100" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle84" /> + <!-- Line: box --> + <rect + x="750" + y="3450" + width="1800" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect86" /> + <!-- Line: box --> + <rect + x="300" + y="6600" + width="1500" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + id="rect88" /> + <!-- Line: box --> + <rect + x="3750" + y="3450" + width="1800" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect90" /> + <!-- Line: box --> + <rect + x="4500" + y="5400" + width="1500" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + id="rect92" /> + <!-- Line: box --> + <rect + x="3300" + y="6600" + width="1500" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + id="rect94" /> + <!-- Line: box --> + <rect + x="2250" + y="1650" + width="1800" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect96" /> + <!-- Line: box --> + <rect + x="0" + y="9300" + width="2100" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " + id="rect98" /> + <!-- Line: box --> + <rect + x="1350" + y="8100" + width="2100" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " + id="rect100" /> + <!-- Line: box --> + <rect + x="3000" + y="9300" + width="2100" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " + id="rect102" /> + <!-- Line: box --> + <rect + x="4350" + y="8100" + width="2100" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " + id="rect104" /> + <!-- Line: box --> + <rect + x="1500" + y="5400" + width="1500" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + id="rect106" /> + <!-- Text --> + <text + xml:space="preserve" + x="6450" + y="300" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="192" + text-anchor="end" + id="text108">rcu_bh</text> + <!-- Text --> + <text + xml:space="preserve" + x="3150" + y="1950" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text110">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="3150" + y="2250" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text112">rcu_node</text> + <!-- Text --> + <text + xml:space="preserve" + x="1650" + y="3750" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text114">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="1650" + y="4050" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text116">rcu_node</text> + <!-- Text --> + <text + xml:space="preserve" + x="4650" + y="4050" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text118">rcu_node</text> + <!-- Text --> + <text + xml:space="preserve" + x="4650" + y="3750" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text120">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="2250" + y="5700" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text122">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="2250" + y="6000" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text124">rcu_data</text> + <!-- Text --> + <text + xml:space="preserve" + x="1050" + y="6900" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text126">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="1050" + y="7200" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text128">rcu_data</text> + <!-- Text --> + <text + xml:space="preserve" + x="5250" + y="5700" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text130">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="5250" + y="6000" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text132">rcu_data</text> + <!-- Text --> + <text + xml:space="preserve" + x="4050" + y="6900" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text134">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="4050" + y="7200" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text136">rcu_data</text> + <!-- Text --> + <text + xml:space="preserve" + x="450" + y="1350" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="start" + id="text138">struct rcu_state</text> + <!-- Text --> + <text + xml:space="preserve" + x="1050" + y="9600" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text140">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="1050" + y="9900" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text142">rcu_dynticks</text> + <!-- Text --> + <text + xml:space="preserve" + x="4050" + y="9600" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text144">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="4050" + y="9900" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text146">rcu_dynticks</text> + <!-- Text --> + <text + xml:space="preserve" + x="2400" + y="8400" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text148">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="2400" + y="8700" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text150">rcu_dynticks</text> + <!-- Text --> + <text + xml:space="preserve" + x="5400" + y="8400" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text152">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="5400" + y="8700" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text154">rcu_dynticks</text> + <!-- Text --> + <text + xml:space="preserve" + x="6000" + y="750" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="192" + text-anchor="end" + id="text156">rcu_sched</text> + <!-- Line --> + <polyline + points="5250,5400 5250,4414 " + style="stroke:#00d1d1;stroke-width:30.00455750000000066;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline158" /> + <!-- Arrowhead on XXXpoint 5250 5400 - 5250 4290--> + </g> +</svg> diff --git a/Documentation/RCU/Design/Data-Structures/BigTreePreemptRCUBHdyntick.svg b/Documentation/RCU/Design/Data-Structures/BigTreePreemptRCUBHdyntick.svg new file mode 100644 index 000000000000..15adcac036c7 --- /dev/null +++ b/Documentation/RCU/Design/Data-Structures/BigTreePreemptRCUBHdyntick.svg @@ -0,0 +1,741 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- Creator: fig2dev Version 3.2 Patchlevel 5e --> + +<!-- CreationDate: Wed Dec 9 17:32:59 2015 --> + +<!-- Magnification: 2.000 --> + +<svg + xmlns:dc="http://purl.org/dc/elements/1.1/" + xmlns:cc="http://creativecommons.org/ns#" + xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" + xmlns:svg="http://www.w3.org/2000/svg" + xmlns="http://www.w3.org/2000/svg" + xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" + xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" + width="6.1in" + height="8.9in" + viewBox="-44 -44 7288 10738" + id="svg2" + version="1.1" + inkscape:version="0.48.4 r9939" + sodipodi:docname="BigTreePreemptRCUBHdyntick.fig"> + <metadata + id="metadata182"> + <rdf:RDF> + <cc:Work + rdf:about=""> + <dc:format>image/svg+xml</dc:format> + <dc:type + rdf:resource="http://purl.org/dc/dcmitype/StillImage" /> + <dc:title></dc:title> + </cc:Work> + </rdf:RDF> + </metadata> + <defs + id="defs180"> + <marker + inkscape:stockid="Arrow1Mend" + orient="auto" + refY="0.0" + refX="0.0" + id="Arrow1Mend" + style="overflow:visible;"> + <path + id="path3940" + d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z " + style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;" + transform="scale(0.4) rotate(180) translate(10,0)" /> + </marker> + </defs> + <sodipodi:namedview + pagecolor="#ffffff" + bordercolor="#666666" + borderopacity="1" + objecttolerance="10" + gridtolerance="10" + guidetolerance="10" + inkscape:pageopacity="0" + inkscape:pageshadow="2" + inkscape:window-width="874" + inkscape:window-height="1148" + id="namedview178" + showgrid="false" + inkscape:zoom="1.2097379" + inkscape:cx="274.5" + inkscape:cy="400.49997" + inkscape:window-x="946" + inkscape:window-y="24" + inkscape:window-maximized="0" + inkscape:current-layer="g4" /> + <g + style="stroke-width:.025in; fill:none" + id="g4"> + <!-- Line: box --> + <rect + x="900" + y="0" + width="6300" + height="7350" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffffff; " + id="rect6" /> + <!-- Line: box --> + <rect + x="1200" + y="600" + width="5700" + height="3750" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffff00; " + id="rect8" /> + <!-- Line: box --> + <rect + x="5400" + y="4950" + width="1500" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + id="rect10" /> + <!-- Line: box --> + <rect + x="450" + y="450" + width="6300" + height="7350" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffffff; " + id="rect12" /> + <!-- Line: box --> + <rect + x="750" + y="1050" + width="5700" + height="3750" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffff00; " + id="rect14" /> + <!-- Line: box --> + <rect + x="4950" + y="5400" + width="1500" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + id="rect16" /> + <!-- Line --> + <polyline + points="5250,8550 5688,6362 " + style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " + id="polyline18" /> + <!-- Arrowhead on XXXpoint 5250 8550 - 5710 6240--> + <polyline + points="5714 6518 5704 6272 5598 6494 " + style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " + id="polyline20" /> + <!-- Line --> + <polyline + points="4050,9750 4486,7712 " + style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " + id="polyline22" /> + <!-- Arrowhead on XXXpoint 4050 9750 - 4512 7590--> + <polyline + points="4514 7868 4506 7622 4396 7844 " + style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " + id="polyline24" /> + <!-- Line --> + <polyline + points="1040,9750 1476,7712 " + style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " + id="polyline26" /> + <!-- Arrowhead on XXXpoint 1040 9750 - 1502 7590--> + <polyline + points="1504 7868 1496 7622 1386 7844 " + style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " + id="polyline28" /> + <!-- Line --> + <polyline + points="2240,8550 2676,6512 " + style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " + id="polyline30" /> + <!-- Arrowhead on XXXpoint 2240 8550 - 2702 6390--> + <polyline + points="2704 6668 2696 6422 2586 6644 " + style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " + id="polyline32" /> + <!-- Line --> + <polyline + points="4050,9750 5682,6360 " + style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " + id="polyline34" /> + <!-- Arrowhead on XXXpoint 4050 9750 - 5736 6246--> + <polyline + points="5672 6518 5722 6276 5562 6466 " + style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " + id="polyline36" /> + <!-- Line --> + <polyline + points="1010,9750 2642,6360 " + style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " + id="polyline38" /> + <!-- Arrowhead on XXXpoint 1010 9750 - 2696 6246--> + <polyline + points="2632 6518 2682 6276 2522 6466 " + style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " + id="polyline40" /> + <!-- Line: box --> + <rect + x="0" + y="900" + width="6300" + height="7350" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffffff; " + id="rect42" /> + <!-- Line: box --> + <rect + x="300" + y="1500" + width="5700" + height="3750" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffff00; " + id="rect44" /> + <!-- Line --> + <polyline + points="1350,3900 2350,3040 " + style="stroke:#00d1d1;stroke-width:30.00205472;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline46" /> + <!-- Arrowhead on XXXpoint 1350 3900 - 2444 2960--> + <!-- Line --> + <polyline + points="4950,3900 3948,3040 " + style="stroke:#00d1d1;stroke-width:30.00205472;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline50" /> + <!-- Arrowhead on XXXpoint 4950 3900 - 3854 2960--> + <!-- Line --> + <polyline + points="4050,7050 4050,4864 " + style="stroke:#00d1d1;stroke-width:30.00205472;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline54" /> + <!-- Arrowhead on XXXpoint 4050 7050 - 4050 4740--> + <!-- Line --> + <polyline + points="1050,7050 1050,4864 " + style="stroke:#00d1d1;stroke-width:30.00205472;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline58" /> + <!-- Arrowhead on XXXpoint 1050 7050 - 1050 4740--> + <!-- Line --> + <polyline + points="2250,5850 2250,4864 " + style="stroke:#00d1d1;stroke-width:30.00205472;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline62" /> + <!-- Arrowhead on XXXpoint 2250 5850 - 2250 4740--> + <!-- Line --> + <polyline + points="2250,8550 2250,6814 " + style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " + id="polyline66" /> + <!-- Arrowhead on XXXpoint 2250 8550 - 2250 6690--> + <!-- Line --> + <polyline + points="1050,9750 1050,8014 " + style="stroke:#00ff00;stroke-width:30.00205472;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline70" /> + <!-- Arrowhead on XXXpoint 1050 9750 - 1050 7890--> + <!-- Line --> + <polyline + points="4050,9750 4050,8014 " + style="stroke:#00ff00;stroke-width:30.00205472;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline74" /> + <!-- Arrowhead on XXXpoint 4050 9750 - 4050 7890--> + <!-- Line --> + <polyline + points="5250,8550 5250,6814 " + style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " + id="polyline78" /> + <!-- Arrowhead on XXXpoint 5250 8550 - 5250 6690--> + <!-- Circle --> + <circle + cx="2850" + cy="4350" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle82" /> + <!-- Circle --> + <circle + cx="3150" + cy="4350" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle84" /> + <!-- Circle --> + <circle + cx="3450" + cy="4350" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle86" /> + <!-- Circle --> + <circle + cx="1350" + cy="5550" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle88" /> + <!-- Circle --> + <circle + cx="1650" + cy="5550" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle90" /> + <!-- Circle --> + <circle + cx="1950" + cy="5550" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle92" /> + <!-- Circle --> + <circle + cx="4350" + cy="5550" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle94" /> + <!-- Circle --> + <circle + cx="4650" + cy="5550" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle96" /> + <!-- Circle --> + <circle + cx="4950" + cy="5550" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle98" /> + <!-- Line: box --> + <rect + x="750" + y="3900" + width="1800" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect100" /> + <!-- Line: box --> + <rect + x="300" + y="7050" + width="1500" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + id="rect102" /> + <!-- Line: box --> + <rect + x="3750" + y="3900" + width="1800" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect104" /> + <!-- Line: box --> + <rect + x="4500" + y="5850" + width="1500" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + id="rect106" /> + <!-- Line: box --> + <rect + x="3300" + y="7050" + width="1500" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + id="rect108" /> + <!-- Line: box --> + <rect + x="2250" + y="2100" + width="1800" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect110" /> + <!-- Line: box --> + <rect + x="0" + y="9750" + width="2100" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " + id="rect112" /> + <!-- Line: box --> + <rect + x="1350" + y="8550" + width="2100" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " + id="rect114" /> + <!-- Line: box --> + <rect + x="3000" + y="9750" + width="2100" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " + id="rect116" /> + <!-- Line: box --> + <rect + x="4350" + y="8550" + width="2100" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " + id="rect118" /> + <!-- Line: box --> + <rect + x="1500" + y="5850" + width="1500" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + id="rect120" /> + <!-- Text --> + <text + xml:space="preserve" + x="6450" + y="750" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="192" + text-anchor="end" + id="text122">rcu_bh</text> + <!-- Text --> + <text + xml:space="preserve" + x="3150" + y="2400" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text124">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="3150" + y="2700" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text126">rcu_node</text> + <!-- Text --> + <text + xml:space="preserve" + x="1650" + y="4200" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text128">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="1650" + y="4500" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text130">rcu_node</text> + <!-- Text --> + <text + xml:space="preserve" + x="4650" + y="4500" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text132">rcu_node</text> + <!-- Text --> + <text + xml:space="preserve" + x="4650" + y="4200" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text134">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="2250" + y="6150" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text136">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="2250" + y="6450" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text138">rcu_data</text> + <!-- Text --> + <text + xml:space="preserve" + x="1050" + y="7350" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text140">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="1050" + y="7650" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text142">rcu_data</text> + <!-- Text --> + <text + xml:space="preserve" + x="5250" + y="6150" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text144">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="5250" + y="6450" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text146">rcu_data</text> + <!-- Text --> + <text + xml:space="preserve" + x="4050" + y="7350" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text148">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="4050" + y="7650" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text150">rcu_data</text> + <!-- Text --> + <text + xml:space="preserve" + x="450" + y="1800" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="start" + id="text152">struct rcu_state</text> + <!-- Text --> + <text + xml:space="preserve" + x="1050" + y="10050" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text154">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="1050" + y="10350" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text156">rcu_dynticks</text> + <!-- Text --> + <text + xml:space="preserve" + x="4050" + y="10050" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text158">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="4050" + y="10350" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text160">rcu_dynticks</text> + <!-- Text --> + <text + xml:space="preserve" + x="2400" + y="8850" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text162">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="2400" + y="9150" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text164">rcu_dynticks</text> + <!-- Text --> + <text + xml:space="preserve" + x="5400" + y="8850" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text166">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="5400" + y="9150" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text168">rcu_dynticks</text> + <!-- Text --> + <text + xml:space="preserve" + x="6900" + y="300" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="192" + text-anchor="end" + id="text170">rcu_preempt</text> + <!-- Text --> + <text + xml:space="preserve" + x="6000" + y="1200" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="192" + text-anchor="end" + id="text172">rcu_sched</text> + <!-- Line --> + <polyline + points="5250,5850 5250,4864 " + style="stroke:#00d1d1;stroke-width:30.00205472;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline174" /> + <!-- Arrowhead on XXXpoint 5250 5850 - 5250 4740--> + </g> +</svg> diff --git a/Documentation/RCU/Design/Data-Structures/BigTreePreemptRCUBHdyntickCB.svg b/Documentation/RCU/Design/Data-Structures/BigTreePreemptRCUBHdyntickCB.svg new file mode 100644 index 000000000000..bbc3801470d0 --- /dev/null +++ b/Documentation/RCU/Design/Data-Structures/BigTreePreemptRCUBHdyntickCB.svg @@ -0,0 +1,858 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- Creator: fig2dev Version 3.2 Patchlevel 5e --> + +<!-- CreationDate: Wed Dec 9 17:29:48 2015 --> + +<!-- Magnification: 2.000 --> + +<svg + xmlns:dc="http://purl.org/dc/elements/1.1/" + xmlns:cc="http://creativecommons.org/ns#" + xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" + xmlns:svg="http://www.w3.org/2000/svg" + xmlns="http://www.w3.org/2000/svg" + xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" + xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" + width="7.4in" + height="9.9in" + viewBox="-44 -44 8938 11938" + id="svg2" + version="1.1" + inkscape:version="0.48.4 r9939" + sodipodi:docname="BigTreePreemptRCUBHdyntickCB.svg"> + <metadata + id="metadata212"> + <rdf:RDF> + <cc:Work + rdf:about=""> + <dc:format>image/svg+xml</dc:format> + <dc:type + rdf:resource="http://purl.org/dc/dcmitype/StillImage" /> + <dc:title></dc:title> + </cc:Work> + </rdf:RDF> + </metadata> + <defs + id="defs210"> + <marker + inkscape:stockid="Arrow1Mend" + orient="auto" + refY="0.0" + refX="0.0" + id="Arrow1Mend" + style="overflow:visible;"> + <path + id="path3970" + d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z " + style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;" + transform="scale(0.4) rotate(180) translate(10,0)" /> + </marker> + </defs> + <sodipodi:namedview + pagecolor="#ffffff" + bordercolor="#666666" + borderopacity="1" + objecttolerance="10" + gridtolerance="10" + guidetolerance="10" + inkscape:pageopacity="0" + inkscape:pageshadow="2" + inkscape:window-width="881" + inkscape:window-height="1128" + id="namedview208" + showgrid="false" + inkscape:zoom="1.0195195" + inkscape:cx="333" + inkscape:cy="445.49997" + inkscape:window-x="936" + inkscape:window-y="24" + inkscape:window-maximized="0" + inkscape:current-layer="g4" /> + <g + style="stroke-width:.025in; fill:none" + id="g4"> + <!-- Line: box --> + <rect + x="900" + y="0" + width="6300" + height="7350" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffffff; " + id="rect6" /> + <!-- Line: box --> + <rect + x="1200" + y="600" + width="5700" + height="3750" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffff00; " + id="rect8" /> + <!-- Line: box --> + <rect + x="5400" + y="4950" + width="1500" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + id="rect10" /> + <!-- Line: box --> + <rect + x="450" + y="450" + width="6300" + height="7350" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffffff; " + id="rect12" /> + <!-- Line: box --> + <rect + x="750" + y="1050" + width="5700" + height="3750" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffff00; " + id="rect14" /> + <!-- Line: box --> + <rect + x="4950" + y="5400" + width="1500" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + id="rect16" /> + <!-- Line --> + <polyline + points="5250,8550 5688,6362 " + style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " + id="polyline18" /> + <!-- Arrowhead on XXXpoint 5250 8550 - 5710 6240--> + <polyline + points="5714 6518 5704 6272 5598 6494 " + style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " + id="polyline20" /> + <!-- Line --> + <polyline + points="4050,9750 4486,7712 " + style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " + id="polyline22" /> + <!-- Arrowhead on XXXpoint 4050 9750 - 4512 7590--> + <polyline + points="4514 7868 4506 7622 4396 7844 " + style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " + id="polyline24" /> + <!-- Line --> + <polyline + points="1040,9750 1476,7712 " + style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " + id="polyline26" /> + <!-- Arrowhead on XXXpoint 1040 9750 - 1502 7590--> + <polyline + points="1504 7868 1496 7622 1386 7844 " + style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " + id="polyline28" /> + <!-- Line --> + <polyline + points="2240,8550 2676,6512 " + style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " + id="polyline30" /> + <!-- Arrowhead on XXXpoint 2240 8550 - 2702 6390--> + <polyline + points="2704 6668 2696 6422 2586 6644 " + style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " + id="polyline32" /> + <!-- Line --> + <polyline + points="4050,9600 5692,6062 " + style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " + id="polyline34" /> + <!-- Arrowhead on XXXpoint 4050 9600 - 5744 5948--> + <polyline + points="5682 6220 5730 5978 5574 6170 " + style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " + id="polyline36" /> + <!-- Line --> + <polyline + points="1086,9600 2728,6062 " + style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " + id="polyline38" /> + <!-- Arrowhead on XXXpoint 1086 9600 - 2780 5948--> + <polyline + points="2718 6220 2766 5978 2610 6170 " + style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " + id="polyline40" /> + <!-- Line: box --> + <rect + x="0" + y="900" + width="6300" + height="7350" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffffff; " + id="rect42" /> + <!-- Line: box --> + <rect + x="300" + y="1500" + width="5700" + height="3750" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffff00; " + id="rect44" /> + <!-- Line --> + <polyline + points="1350,3900 2350,3040 " + style="stroke:#00d1d1;stroke-width:29.99463964;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline46" /> + <!-- Arrowhead on XXXpoint 1350 3900 - 2444 2960--> + <!-- Line --> + <polyline + points="4950,3900 3948,3040 " + style="stroke:#00d1d1;stroke-width:29.99463964;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline50" /> + <!-- Arrowhead on XXXpoint 4950 3900 - 3854 2960--> + <!-- Line --> + <polyline + points="4050,7050 4050,4864 " + style="stroke:#00d1d1;stroke-width:29.99463964;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline54" /> + <!-- Arrowhead on XXXpoint 4050 7050 - 4050 4740--> + <!-- Line --> + <polyline + points="1050,7050 1050,4864 " + style="stroke:#00d1d1;stroke-width:29.99463964;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline58" /> + <!-- Arrowhead on XXXpoint 1050 7050 - 1050 4740--> + <!-- Line --> + <polyline + points="2250,5850 2250,4864 " + style="stroke:#00d1d1;stroke-width:29.99463964;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline62" /> + <!-- Arrowhead on XXXpoint 2250 5850 - 2250 4740--> + <!-- Line --> + <polyline + points="2250,8550 2250,6814 " + style="stroke:#00ff00;stroke-width:29.99463964;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline66" /> + <!-- Arrowhead on XXXpoint 2250 8550 - 2250 6690--> + <!-- Line --> + <polyline + points="1050,9750 1050,8014 " + style="stroke:#00ff00;stroke-width:29.99463964;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline70" /> + <!-- Arrowhead on XXXpoint 1050 9750 - 1050 7890--> + <!-- Line --> + <polyline + points="4050,9750 4050,8014 " + style="stroke:#00ff00;stroke-width:29.99463964;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline74" /> + <!-- Arrowhead on XXXpoint 4050 9750 - 4050 7890--> + <!-- Line --> + <polyline + points="5250,8550 5250,6814 " + style="stroke:#00ff00;stroke-width:29.99463964;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline78" /> + <!-- Arrowhead on XXXpoint 5250 8550 - 5250 6690--> + <!-- Line --> + <polyline + points="6000,6300 8048,7910 " + style="stroke:#87cfff;stroke-width:30;stroke-linejoin:miter;stroke-linecap:butt;marker-end:url(#Arrow1Mend)" + id="polyline82" /> + <!-- Arrowhead on XXXpoint 6000 6300 - 8146 7986--> + <!-- Circle --> + <circle + cx="2850" + cy="4350" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle86" /> + <!-- Circle --> + <circle + cx="3150" + cy="4350" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle88" /> + <!-- Circle --> + <circle + cx="3450" + cy="4350" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle90" /> + <!-- Circle --> + <circle + cx="1350" + cy="5550" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle92" /> + <!-- Circle --> + <circle + cx="1650" + cy="5550" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle94" /> + <!-- Circle --> + <circle + cx="1950" + cy="5550" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle96" /> + <!-- Circle --> + <circle + cx="4350" + cy="5550" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle98" /> + <!-- Circle --> + <circle + cx="4650" + cy="5550" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle100" /> + <!-- Circle --> + <circle + cx="4950" + cy="5550" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle102" /> + <!-- Line: box --> + <rect + x="7350" + y="7950" + width="1500" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " + id="rect104" /> + <!-- Line: box --> + <rect + x="7350" + y="9450" + width="1500" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " + id="rect106" /> + <!-- Line --> + <polyline + points="8100,8850 8100,9384 " + style="stroke:#000000;stroke-width:30;stroke-linejoin:miter;stroke-linecap:butt;marker-end:url(#Arrow1Mend)" + id="polyline108" /> + <!-- Arrowhead on XXXpoint 8100 8850 - 8100 9510--> + <!-- Line: box --> + <rect + x="7350" + y="10950" + width="1500" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " + id="rect112" /> + <!-- Line --> + <polyline + points="8100,10350 8100,10884 " + style="stroke:#000000;stroke-width:30;stroke-linejoin:miter;stroke-linecap:butt;marker-end:url(#Arrow1Mend)" + id="polyline114" /> + <!-- Arrowhead on XXXpoint 8100 10350 - 8100 11010--> + <!-- Line: box --> + <rect + x="750" + y="3900" + width="1800" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect118" /> + <!-- Line: box --> + <rect + x="300" + y="7050" + width="1500" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + id="rect120" /> + <!-- Line: box --> + <rect + x="3750" + y="3900" + width="1800" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect122" /> + <!-- Line: box --> + <rect + x="4500" + y="5850" + width="1500" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + id="rect124" /> + <!-- Line: box --> + <rect + x="3300" + y="7050" + width="1500" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + id="rect126" /> + <!-- Line: box --> + <rect + x="2250" + y="2100" + width="1800" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect128" /> + <!-- Line: box --> + <rect + x="0" + y="9750" + width="2100" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " + id="rect130" /> + <!-- Line: box --> + <rect + x="1350" + y="8550" + width="2100" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " + id="rect132" /> + <!-- Line: box --> + <rect + x="3000" + y="9750" + width="2100" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " + id="rect134" /> + <!-- Line: box --> + <rect + x="4350" + y="8550" + width="2100" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " + id="rect136" /> + <!-- Line: box --> + <rect + x="1500" + y="5850" + width="1500" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + id="rect138" /> + <!-- Text --> + <text + xml:space="preserve" + x="8100" + y="8250" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text140">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="8100" + y="8550" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text142">rcu_head</text> + <!-- Text --> + <text + xml:space="preserve" + x="8100" + y="9750" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text144">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="8100" + y="10050" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text146">rcu_head</text> + <!-- Text --> + <text + xml:space="preserve" + x="8100" + y="11250" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text148">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="8100" + y="11550" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text150">rcu_head</text> + <!-- Text --> + <text + xml:space="preserve" + x="6000" + y="1200" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="192" + text-anchor="end" + id="text152">rcu_sched</text> + <!-- Text --> + <text + xml:space="preserve" + x="6450" + y="750" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="192" + text-anchor="end" + id="text154">rcu_bh</text> + <!-- Text --> + <text + xml:space="preserve" + x="3150" + y="2400" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text156">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="3150" + y="2700" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text158">rcu_node</text> + <!-- Text --> + <text + xml:space="preserve" + x="1650" + y="4200" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text160">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="1650" + y="4500" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text162">rcu_node</text> + <!-- Text --> + <text + xml:space="preserve" + x="4650" + y="4500" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text164">rcu_node</text> + <!-- Text --> + <text + xml:space="preserve" + x="4650" + y="4200" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text166">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="2250" + y="6150" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text168">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="2250" + y="6450" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text170">rcu_data</text> + <!-- Text --> + <text + xml:space="preserve" + x="1050" + y="7350" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text172">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="1050" + y="7650" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text174">rcu_data</text> + <!-- Text --> + <text + xml:space="preserve" + x="5250" + y="6150" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text176">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="5250" + y="6450" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text178">rcu_data</text> + <!-- Text --> + <text + xml:space="preserve" + x="4050" + y="7350" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text180">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="4050" + y="7650" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text182">rcu_data</text> + <!-- Text --> + <text + xml:space="preserve" + x="450" + y="1800" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="start" + id="text184">struct rcu_state</text> + <!-- Text --> + <text + xml:space="preserve" + x="1050" + y="10050" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text186">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="1050" + y="10350" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text188">rcu_dynticks</text> + <!-- Text --> + <text + xml:space="preserve" + x="4050" + y="10050" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text190">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="4050" + y="10350" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text192">rcu_dynticks</text> + <!-- Text --> + <text + xml:space="preserve" + x="2400" + y="8850" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text194">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="2400" + y="9150" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text196">rcu_dynticks</text> + <!-- Text --> + <text + xml:space="preserve" + x="5400" + y="8850" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text198">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="5400" + y="9150" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text200">rcu_dynticks</text> + <!-- Text --> + <text + xml:space="preserve" + x="6900" + y="300" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="192" + text-anchor="end" + id="text202">rcu_preempt</text> + <!-- Line --> + <polyline + points="5250,5850 5250,4864 " + style="stroke:#00d1d1;stroke-width:29.99463964;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline204" /> + <!-- Arrowhead on XXXpoint 5250 5850 - 5250 4740--> + </g> +</svg> diff --git a/Documentation/RCU/Design/Data-Structures/Data-Structures.html b/Documentation/RCU/Design/Data-Structures/Data-Structures.html new file mode 100644 index 000000000000..7eb47ac25ad7 --- /dev/null +++ b/Documentation/RCU/Design/Data-Structures/Data-Structures.html @@ -0,0 +1,1333 @@ +<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" + "http://www.w3.org/TR/html4/loose.dtd"> + <html> + <head><title>A Tour Through TREE_RCU's Data Structures [LWN.net]</title> + <meta HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1"> + + <p>January 27, 2016</p> + <p>This article was contributed by Paul E. McKenney</p> + +<h3>Introduction</h3> + +This document describes RCU's major data structures and their relationship +to each other. + +<ol> +<li> <a href="#Data-Structure Relationships"> + Data-Structure Relationships</a> +<li> <a href="#The rcu_state Structure"> + The <tt>rcu_state</tt> Structure</a> +<li> <a href="#The rcu_node Structure"> + The <tt>rcu_node</tt> Structure</a> +<li> <a href="#The rcu_data Structure"> + The <tt>rcu_data</tt> Structure</a> +<li> <a href="#The rcu_dynticks Structure"> + The <tt>rcu_dynticks</tt> Structure</a> +<li> <a href="#The rcu_head Structure"> + The <tt>rcu_head</tt> Structure</a> +<li> <a href="#RCU-Specific Fields in the task_struct Structure"> + RCU-Specific Fields in the <tt>task_struct</tt> Structure</a> +<li> <a href="#Accessor Functions"> + Accessor Functions</a> +</ol> + +At the end we have the +<a href="#Answers to Quick Quizzes">answers to the quick quizzes</a>. + +<h3><a name="Data-Structure Relationships">Data-Structure Relationships</a></h3> + +<p>RCU is for all intents and purposes a large state machine, and its +data structures maintain the state in such a way as to allow RCU readers +to execute extremely quickly, while also processing the RCU grace periods +requested by updaters in an efficient and extremely scalable fashion. +The efficiency and scalability of RCU updaters is provided primarily +by a combining tree, as shown below: + +</p><p><img src="BigTreeClassicRCU.svg" alt="BigTreeClassicRCU.svg" width="30%"> + +</p><p>This diagram shows an enclosing <tt>rcu_state</tt> structure +containing a tree of <tt>rcu_node</tt> structures. +Each leaf node of the <tt>rcu_node</tt> tree has up to 16 +<tt>rcu_data</tt> structures associated with it, so that there +are <tt>NR_CPUS</tt> number of <tt>rcu_data</tt> structures, +one for each possible CPU. +This structure is adjusted at boot time, if needed, to handle the +common case where <tt>nr_cpu_ids</tt> is much less than +<tt>NR_CPUs</tt>. +For example, a number of Linux distributions set <tt>NR_CPUs=4096</tt>, +which results in a three-level <tt>rcu_node</tt> tree. +If the actual hardware has only 16 CPUs, RCU will adjust itself +at boot time, resulting in an <tt>rcu_node</tt> tree with only a single node. + +</p><p>The purpose of this combining tree is to allow per-CPU events +such as quiescent states, dyntick-idle transitions, +and CPU hotplug operations to be processed efficiently +and scalably. +Quiescent states are recorded by the per-CPU <tt>rcu_data</tt> structures, +and other events are recorded by the leaf-level <tt>rcu_node</tt> +structures. +All of these events are combined at each level of the tree until finally +grace periods are completed at the tree's root <tt>rcu_node</tt> +structure. +A grace period can be completed at the root once every CPU +(or, in the case of <tt>CONFIG_PREEMPT_RCU</tt>, task) +has passed through a quiescent state. +Once a grace period has completed, record of that fact is propagated +back down the tree. + +</p><p>As can be seen from the diagram, on a 64-bit system +a two-level tree with 64 leaves can accommodate 1,024 CPUs, with a fanout +of 64 at the root and a fanout of 16 at the leaves. + +<table> +<tr><th> </th></tr> +<tr><th align="left">Quick Quiz:</th></tr> +<tr><td> + Why isn't the fanout at the leaves also 64? +</td></tr> +<tr><th align="left">Answer:</th></tr> +<tr><td bgcolor="#ffffff"><font color="ffffff"> + Because there are more types of events that affect the leaf-level + <tt>rcu_node</tt> structures than further up the tree. + Therefore, if the leaf <tt>rcu_node</tt> structures have fanout of + 64, the contention on these structures' <tt>->structures</tt> + becomes excessive. + Experimentation on a wide variety of systems has shown that a fanout + of 16 works well for the leaves of the <tt>rcu_node</tt> tree. + </font> + + <p><font color="ffffff">Of course, further experience with + systems having hundreds or thousands of CPUs may demonstrate + that the fanout for the non-leaf <tt>rcu_node</tt> structures + must also be reduced. + Such reduction can be easily carried out when and if it proves + necessary. + In the meantime, if you are using such a system and running into + contention problems on the non-leaf <tt>rcu_node</tt> structures, + you may use the <tt>CONFIG_RCU_FANOUT</tt> kernel configuration + parameter to reduce the non-leaf fanout as needed. + </font> + + <p><font color="ffffff">Kernels built for systems with + strong NUMA characteristics might also need to adjust + <tt>CONFIG_RCU_FANOUT</tt> so that the domains of the + <tt>rcu_node</tt> structures align with hardware boundaries. + However, there has thus far been no need for this. +</font></td></tr> +<tr><td> </td></tr> +</table> + +<p>If your system has more than 1,024 CPUs (or more than 512 CPUs on +a 32-bit system), then RCU will automatically add more levels to the +tree. +For example, if you are crazy enough to build a 64-bit system with 65,536 +CPUs, RCU would configure the <tt>rcu_node</tt> tree as follows: + +</p><p><img src="HugeTreeClassicRCU.svg" alt="HugeTreeClassicRCU.svg" width="50%"> + +</p><p>RCU currently permits up to a four-level tree, which on a 64-bit system +accommodates up to 4,194,304 CPUs, though only a mere 524,288 CPUs for +32-bit systems. +On the other hand, you can set <tt>CONFIG_RCU_FANOUT</tt> to be +as small as 2 if you wish, which would permit only 16 CPUs, which +is useful for testing. + +</p><p>This multi-level combining tree allows us to get most of the +performance and scalability +benefits of partitioning, even though RCU grace-period detection is +inherently a global operation. +The trick here is that only the last CPU to report a quiescent state +into a given <tt>rcu_node</tt> structure need advance to the <tt>rcu_node</tt> +structure at the next level up the tree. +This means that at the leaf-level <tt>rcu_node</tt> structure, only +one access out of sixteen will progress up the tree. +For the internal <tt>rcu_node</tt> structures, the situation is even +more extreme: Only one access out of sixty-four will progress up +the tree. +Because the vast majority of the CPUs do not progress up the tree, +the lock contention remains roughly constant up the tree. +No matter how many CPUs there are in the system, at most 64 quiescent-state +reports per grace period will progress all the way to the root +<tt>rcu_node</tt> structure, thus ensuring that the lock contention +on that root <tt>rcu_node</tt> structure remains acceptably low. + +</p><p>In effect, the combining tree acts like a big shock absorber, +keeping lock contention under control at all tree levels regardless +of the level of loading on the system. + +</p><p>The Linux kernel actually supports multiple flavors of RCU +running concurrently, so RCU builds separate data structures for each +flavor. +For example, for <tt>CONFIG_TREE_RCU=y</tt> kernels, RCU provides +rcu_sched and rcu_bh, as shown below: + +</p><p><img src="BigTreeClassicRCUBH.svg" alt="BigTreeClassicRCUBH.svg" width="33%"> + +</p><p>Energy efficiency is increasingly important, and for that +reason the Linux kernel provides <tt>CONFIG_NO_HZ_IDLE</tt>, which +turns off the scheduling-clock interrupts on idle CPUs, which in +turn allows those CPUs to attain deeper sleep states and to consume +less energy. +CPUs whose scheduling-clock interrupts have been turned off are +said to be in <i>dyntick-idle mode</i>. +RCU must handle dyntick-idle CPUs specially +because RCU would otherwise wake up each CPU on every grace period, +which would defeat the whole purpose of <tt>CONFIG_NO_HZ_IDLE</tt>. +RCU uses the <tt>rcu_dynticks</tt> structure to track +which CPUs are in dyntick idle mode, as shown below: + +</p><p><img src="BigTreeClassicRCUBHdyntick.svg" alt="BigTreeClassicRCUBHdyntick.svg" width="33%"> + +</p><p>However, if a CPU is in dyntick-idle mode, it is in that mode +for all flavors of RCU. +Therefore, a single <tt>rcu_dynticks</tt> structure is allocated per +CPU, and all of a given CPU's <tt>rcu_data</tt> structures share +that <tt>rcu_dynticks</tt>, as shown in the figure. + +</p><p>Kernels built with <tt>CONFIG_PREEMPT_RCU</tt> support +rcu_preempt in addition to rcu_sched and rcu_bh, as shown below: + +</p><p><img src="BigTreePreemptRCUBHdyntick.svg" alt="BigTreePreemptRCUBHdyntick.svg" width="35%"> + +</p><p>RCU updaters wait for normal grace periods by registering +RCU callbacks, either directly via <tt>call_rcu()</tt> and +friends (namely <tt>call_rcu_bh()</tt> and <tt>call_rcu_sched()</tt>), +there being a separate interface per flavor of RCU) +or indirectly via <tt>synchronize_rcu()</tt> and friends. +RCU callbacks are represented by <tt>rcu_head</tt> structures, +which are queued on <tt>rcu_data</tt> structures while they are +waiting for a grace period to elapse, as shown in the following figure: + +</p><p><img src="BigTreePreemptRCUBHdyntickCB.svg" alt="BigTreePreemptRCUBHdyntickCB.svg" width="40%"> + +</p><p>This figure shows how <tt>TREE_RCU</tt>'s and +<tt>PREEMPT_RCU</tt>'s major data structures are related. +Lesser data structures will be introduced with the algorithms that +make use of them. + +</p><p>Note that each of the data structures in the above figure has +its own synchronization: + +<p><ol> +<li> Each <tt>rcu_state</tt> structures has a lock and a mutex, + and some fields are protected by the corresponding root + <tt>rcu_node</tt> structure's lock. +<li> Each <tt>rcu_node</tt> structure has a spinlock. +<li> The fields in <tt>rcu_data</tt> are private to the corresponding + CPU, although a few can be read and written by other CPUs. +<li> Similarly, the fields in <tt>rcu_dynticks</tt> are private + to the corresponding CPU, although a few can be read by + other CPUs. +</ol> + +<p>It is important to note that different data structures can have +very different ideas about the state of RCU at any given time. +For but one example, awareness of the start or end of a given RCU +grace period propagates slowly through the data structures. +This slow propagation is absolutely necessary for RCU to have good +read-side performance. +If this balkanized implementation seems foreign to you, one useful +trick is to consider each instance of these data structures to be +a different person, each having the usual slightly different +view of reality. + +</p><p>The general role of each of these data structures is as +follows: + +</p><ol> +<li> <tt>rcu_state</tt>: + This structure forms the interconnection between the + <tt>rcu_node</tt> and <tt>rcu_data</tt> structures, + tracks grace periods, serves as short-term repository + for callbacks orphaned by CPU-hotplug events, + maintains <tt>rcu_barrier()</tt> state, + tracks expedited grace-period state, + and maintains state used to force quiescent states when + grace periods extend too long, +<li> <tt>rcu_node</tt>: This structure forms the combining + tree that propagates quiescent-state + information from the leaves to the root, and also propagates + grace-period information from the root to the leaves. + It provides local copies of the grace-period state in order + to allow this information to be accessed in a synchronized + manner without suffering the scalability limitations that + would otherwise be imposed by global locking. + In <tt>CONFIG_PREEMPT_RCU</tt> kernels, it manages the lists + of tasks that have blocked while in their current + RCU read-side critical section. + In <tt>CONFIG_PREEMPT_RCU</tt> with + <tt>CONFIG_RCU_BOOST</tt>, it manages the + per-<tt>rcu_node</tt> priority-boosting + kernel threads (kthreads) and state. + Finally, it records CPU-hotplug state in order to determine + which CPUs should be ignored during a given grace period. +<li> <tt>rcu_data</tt>: This per-CPU structure is the + focus of quiescent-state detection and RCU callback queuing. + It also tracks its relationship to the corresponding leaf + <tt>rcu_node</tt> structure to allow more-efficient + propagation of quiescent states up the <tt>rcu_node</tt> + combining tree. + Like the <tt>rcu_node</tt> structure, it provides a local + copy of the grace-period information to allow for-free + synchronized + access to this information from the corresponding CPU. + Finally, this structure records past dyntick-idle state + for the corresponding CPU and also tracks statistics. +<li> <tt>rcu_dynticks</tt>: + This per-CPU structure tracks the current dyntick-idle + state for the corresponding CPU. + Unlike the other three structures, the <tt>rcu_dynticks</tt> + structure is not replicated per RCU flavor. +<li> <tt>rcu_head</tt>: + This structure represents RCU callbacks, and is the + only structure allocated and managed by RCU users. + The <tt>rcu_head</tt> structure is normally embedded + within the RCU-protected data structure. +</ol> + +<p>If all you wanted from this article was a general notion of how +RCU's data structures are related, you are done. +Otherwise, each of the following sections give more details on +the <tt>rcu_state</tt>, <tt>rcu_node</tt>, <tt>rcu_data</tt>, +and <tt>rcu_dynticks</tt> data structures. + +<h3><a name="The rcu_state Structure"> +The <tt>rcu_state</tt> Structure</a></h3> + +<p>The <tt>rcu_state</tt> structure is the base structure that +represents a flavor of RCU. +This structure forms the interconnection between the +<tt>rcu_node</tt> and <tt>rcu_data</tt> structures, +tracks grace periods, contains the lock used to +synchronize with CPU-hotplug events, +and maintains state used to force quiescent states when +grace periods extend too long, + +</p><p>A few of the <tt>rcu_state</tt> structure's fields are discussed, +singly and in groups, in the following sections. +The more specialized fields are covered in the discussion of their +use. + +<h5>Relationship to rcu_node and rcu_data Structures</h5> + +This portion of the <tt>rcu_state</tt> structure is declared +as follows: + +<pre> + 1 struct rcu_node node[NUM_RCU_NODES]; + 2 struct rcu_node *level[NUM_RCU_LVLS + 1]; + 3 struct rcu_data __percpu *rda; +</pre> + +<table> +<tr><th> </th></tr> +<tr><th align="left">Quick Quiz:</th></tr> +<tr><td> + Wait a minute! + You said that the <tt>rcu_node</tt> structures formed a tree, + but they are declared as a flat array! + What gives? +</td></tr> +<tr><th align="left">Answer:</th></tr> +<tr><td bgcolor="#ffffff"><font color="ffffff"> + The tree is laid out in the array. + The first node In the array is the head, the next set of nodes in the + array are children of the head node, and so on until the last set of + nodes in the array are the leaves. + </font> + + <p><font color="ffffff">See the following diagrams to see how + this works. +</font></td></tr> +<tr><td> </td></tr> +</table> + +<p>The <tt>rcu_node</tt> tree is embedded into the +<tt>->node[]</tt> array as shown in the following figure: + +</p><p><img src="TreeMapping.svg" alt="TreeMapping.svg" width="40%"> + +</p><p>One interesting consequence of this mapping is that a +breadth-first traversal of the tree is implemented as a simple +linear scan of the array, which is in fact what the +<tt>rcu_for_each_node_breadth_first()</tt> macro does. +This macro is used at the beginning and ends of grace periods. + +</p><p>Each entry of the <tt>->level</tt> array references +the first <tt>rcu_node</tt> structure on the corresponding level +of the tree, for example, as shown below: + +</p><p><img src="TreeMappingLevel.svg" alt="TreeMappingLevel.svg" width="40%"> + +</p><p>The zero<sup>th</sup> element of the array references the root +<tt>rcu_node</tt> structure, the first element references the +first child of the root <tt>rcu_node</tt>, and finally the second +element references the first leaf <tt>rcu_node</tt> structure. + +</p><p>For whatever it is worth, if you draw the tree to be tree-shaped +rather than array-shaped, it is easy to draw a planar representation: + +</p><p><img src="TreeLevel.svg" alt="TreeLevel.svg" width="60%"> + +</p><p>Finally, the <tt>->rda</tt> field references a per-CPU +pointer to the corresponding CPU's <tt>rcu_data</tt> structure. + +</p><p>All of these fields are constant once initialization is complete, +and therefore need no protection. + +<h5>Grace-Period Tracking</h5> + +<p>This portion of the <tt>rcu_state</tt> structure is declared +as follows: + +<pre> + 1 unsigned long gpnum; + 2 unsigned long completed; +</pre> + +<p>RCU grace periods are numbered, and +the <tt>->gpnum</tt> field contains the number of the grace +period that started most recently. +The <tt>->completed</tt> field contains the number of the +grace period that completed most recently. +If the two fields are equal, the RCU grace period that most recently +started has already completed, and therefore the corresponding +flavor of RCU is idle. +If <tt>->gpnum</tt> is one greater than <tt>->completed</tt>, +then <tt>->gpnum</tt> gives the number of the current RCU +grace period, which has not yet completed. +Any other combination of values indicates that something is broken. +These two fields are protected by the root <tt>rcu_node</tt>'s +<tt>->lock</tt> field. + +</p><p>There are <tt>->gpnum</tt> and <tt>->completed</tt> fields +in the <tt>rcu_node</tt> and <tt>rcu_data</tt> structures +as well. +The fields in the <tt>rcu_state</tt> structure represent the +most current values, and those of the other structures are compared +in order to detect the start of a new grace period in a distributed +fashion. +The values flow from <tt>rcu_state</tt> to <tt>rcu_node</tt> +(down the tree from the root to the leaves) to <tt>rcu_data</tt>. + +<h5>Miscellaneous</h5> + +<p>This portion of the <tt>rcu_state</tt> structure is declared +as follows: + +<pre> + 1 unsigned long gp_max; + 2 char abbr; + 3 char *name; +</pre> + +<p>The <tt>->gp_max</tt> field tracks the duration of the longest +grace period in jiffies. +It is protected by the root <tt>rcu_node</tt>'s <tt>->lock</tt>. + +<p>The <tt>->name</tt> field points to the name of the RCU flavor +(for example, “rcu_sched”), and is constant. +The <tt>->abbr</tt> field contains a one-character abbreviation, +for example, “s” for RCU-sched. + +<h3><a name="The rcu_node Structure"> +The <tt>rcu_node</tt> Structure</a></h3> + +<p>The <tt>rcu_node</tt> structures form the combining +tree that propagates quiescent-state +information from the leaves to the root and also that propagates +grace-period information from the root down to the leaves. +They provides local copies of the grace-period state in order +to allow this information to be accessed in a synchronized +manner without suffering the scalability limitations that +would otherwise be imposed by global locking. +In <tt>CONFIG_PREEMPT_RCU</tt> kernels, they manage the lists +of tasks that have blocked while in their current +RCU read-side critical section. +In <tt>CONFIG_PREEMPT_RCU</tt> with +<tt>CONFIG_RCU_BOOST</tt>, they manage the +per-<tt>rcu_node</tt> priority-boosting +kernel threads (kthreads) and state. +Finally, they record CPU-hotplug state in order to determine +which CPUs should be ignored during a given grace period. + +</p><p>The <tt>rcu_node</tt> structure's fields are discussed, +singly and in groups, in the following sections. + +<h5>Connection to Combining Tree</h5> + +<p>This portion of the <tt>rcu_node</tt> structure is declared +as follows: + +<pre> + 1 struct rcu_node *parent; + 2 u8 level; + 3 u8 grpnum; + 4 unsigned long grpmask; + 5 int grplo; + 6 int grphi; +</pre> + +<p>The <tt>->parent</tt> pointer references the <tt>rcu_node</tt> +one level up in the tree, and is <tt>NULL</tt> for the root +<tt>rcu_node</tt>. +The RCU implementation makes heavy use of this field to push quiescent +states up the tree. +The <tt>->level</tt> field gives the level in the tree, with +the root being at level zero, its children at level one, and so on. +The <tt>->grpnum</tt> field gives this node's position within +the children of its parent, so this number can range between 0 and 31 +on 32-bit systems and between 0 and 63 on 64-bit systems. +The <tt>->level</tt> and <tt>->grpnum</tt> fields are +used only during initialization and for tracing. +The <tt>->grpmask</tt> field is the bitmask counterpart of +<tt>->grpnum</tt>, and therefore always has exactly one bit set. +This mask is used to clear the bit corresponding to this <tt>rcu_node</tt> +structure in its parent's bitmasks, which are described later. +Finally, the <tt>->grplo</tt> and <tt>->grphi</tt> fields +contain the lowest and highest numbered CPU served by this +<tt>rcu_node</tt> structure, respectively. + +</p><p>All of these fields are constant, and thus do not require any +synchronization. + +<h5>Synchronization</h5> + +<p>This field of the <tt>rcu_node</tt> structure is declared +as follows: + +<pre> + 1 raw_spinlock_t lock; +</pre> + +<p>This field is used to protect the remaining fields in this structure, +unless otherwise stated. +That said, all of the fields in this structure can be accessed without +locking for tracing purposes. +Yes, this can result in confusing traces, but better some tracing confusion +than to be heisenbugged out of existence. + +<h5>Grace-Period Tracking</h5> + +<p>This portion of the <tt>rcu_node</tt> structure is declared +as follows: + +<pre> + 1 unsigned long gpnum; + 2 unsigned long completed; +</pre> + +<p>These fields are the counterparts of the fields of the same name in +the <tt>rcu_state</tt> structure. +They each may lag up to one behind their <tt>rcu_state</tt> +counterparts. +If a given <tt>rcu_node</tt> structure's <tt>->gpnum</tt> and +<tt>->complete</tt> fields are equal, then this <tt>rcu_node</tt> +structure believes that RCU is idle. +Otherwise, as with the <tt>rcu_state</tt> structure, +the <tt>->gpnum</tt> field will be one greater than the +<tt>->complete</tt> fields, with <tt>->gpnum</tt> +indicating which grace period this <tt>rcu_node</tt> believes +is still being waited for. + +</p><p>The <tt>>gpnum</tt> field of each <tt>rcu_node</tt> +structure is updated at the beginning +of each grace period, and the <tt>->completed</tt> fields are +updated at the end of each grace period. + +<h5>Quiescent-State Tracking</h5> + +<p>These fields manage the propagation of quiescent states up the +combining tree. + +</p><p>This portion of the <tt>rcu_node</tt> structure has fields +as follows: + +<pre> + 1 unsigned long qsmask; + 2 unsigned long expmask; + 3 unsigned long qsmaskinit; + 4 unsigned long expmaskinit; +</pre> + +<p>The <tt>->qsmask</tt> field tracks which of this +<tt>rcu_node</tt> structure's children still need to report +quiescent states for the current normal grace period. +Such children will have a value of 1 in their corresponding bit. +Note that the leaf <tt>rcu_node</tt> structures should be +thought of as having <tt>rcu_data</tt> structures as their +children. +Similarly, the <tt>->expmask</tt> field tracks which +of this <tt>rcu_node</tt> structure's children still need to report +quiescent states for the current expedited grace period. +An expedited grace period has +the same conceptual properties as a normal grace period, but the +expedited implementation accepts extreme CPU overhead to obtain +much lower grace-period latency, for example, consuming a few +tens of microseconds worth of CPU time to reduce grace-period +duration from milliseconds to tens of microseconds. +The <tt>->qsmaskinit</tt> field tracks which of this +<tt>rcu_node</tt> structure's children cover for at least +one online CPU. +This mask is used to initialize <tt>->qsmask</tt>, +and <tt>->expmaskinit</tt> is used to initialize +<tt>->expmask</tt> and the beginning of the +normal and expedited grace periods, respectively. + +<table> +<tr><th> </th></tr> +<tr><th align="left">Quick Quiz:</th></tr> +<tr><td> + Why are these bitmasks protected by locking? + Come on, haven't you heard of atomic instructions??? +</td></tr> +<tr><th align="left">Answer:</th></tr> +<tr><td bgcolor="#ffffff"><font color="ffffff"> + Lockless grace-period computation! Such a tantalizing possibility! + </font> + + <p><font color="ffffff">But consider the following sequence of events: + </font> + + <ol> + <li> <font color="ffffff">CPU 0 has been in dyntick-idle + mode for quite some time. + When it wakes up, it notices that the current RCU + grace period needs it to report in, so it sets a + flag where the scheduling clock interrupt will find it. + </font><p> + <li> <font color="ffffff">Meanwhile, CPU 1 is running + <tt>force_quiescent_state()</tt>, + and notices that CPU 0 has been in dyntick idle mode, + which qualifies as an extended quiescent state. + </font><p> + <li> <font color="ffffff">CPU 0's scheduling clock + interrupt fires in the + middle of an RCU read-side critical section, and notices + that the RCU core needs something, so commences RCU softirq + processing. + </font> + <p> + <li> <font color="ffffff">CPU 0's softirq handler + executes and is just about ready + to report its quiescent state up the <tt>rcu_node</tt> + tree. + </font><p> + <li> <font color="ffffff">But CPU 1 beats it to the punch, + completing the current + grace period and starting a new one. + </font><p> + <li> <font color="ffffff">CPU 0 now reports its quiescent + state for the wrong + grace period. + That grace period might now end before the RCU read-side + critical section. + If that happens, disaster will ensue. + </font> + </ol> + + <p><font color="ffffff">So the locking is absolutely required in + order to coordinate + clearing of the bits with the grace-period numbers in + <tt>->gpnum</tt> and <tt>->completed</tt>. +</font></td></tr> +<tr><td> </td></tr> +</table> + +<h5>Blocked-Task Management</h5> + +<p><tt>PREEMPT_RCU</tt> allows tasks to be preempted in the +midst of their RCU read-side critical sections, and these tasks +must be tracked explicitly. +The details of exactly why and how they are tracked will be covered +in a separate article on RCU read-side processing. +For now, it is enough to know that the <tt>rcu_node</tt> +structure tracks them. + +<pre> + 1 struct list_head blkd_tasks; + 2 struct list_head *gp_tasks; + 3 struct list_head *exp_tasks; + 4 bool wait_blkd_tasks; +</pre> + +<p>The <tt>->blkd_tasks</tt> field is a list header for +the list of blocked and preempted tasks. +As tasks undergo context switches within RCU read-side critical +sections, their <tt>task_struct</tt> structures are enqueued +(via the <tt>task_struct</tt>'s <tt>->rcu_node_entry</tt> +field) onto the head of the <tt>->blkd_tasks</tt> list for the +leaf <tt>rcu_node</tt> structure corresponding to the CPU +on which the outgoing context switch executed. +As these tasks later exit their RCU read-side critical sections, +they remove themselves from the list. +This list is therefore in reverse time order, so that if one of the tasks +is blocking the current grace period, all subsequent tasks must +also be blocking that same grace period. +Therefore, a single pointer into this list suffices to track +all tasks blocking a given grace period. +That pointer is stored in <tt>->gp_tasks</tt> for normal +grace periods and in <tt>->exp_tasks</tt> for expedited +grace periods. +These last two fields are <tt>NULL</tt> if either there is +no grace period in flight or if there are no blocked tasks +preventing that grace period from completing. +If either of these two pointers is referencing a task that +removes itself from the <tt>->blkd_tasks</tt> list, +then that task must advance the pointer to the next task on +the list, or set the pointer to <tt>NULL</tt> if there +are no subsequent tasks on the list. + +</p><p>For example, suppose that tasks T1, T2, and T3 are +all hard-affinitied to the largest-numbered CPU in the system. +Then if task T1 blocked in an RCU read-side +critical section, then an expedited grace period started, +then task T2 blocked in an RCU read-side critical section, +then a normal grace period started, and finally task 3 blocked +in an RCU read-side critical section, then the state of the +last leaf <tt>rcu_node</tt> structure's blocked-task list +would be as shown below: + +</p><p><img src="blkd_task.svg" alt="blkd_task.svg" width="60%"> + +</p><p>Task T1 is blocking both grace periods, task T2 is +blocking only the normal grace period, and task T3 is blocking +neither grace period. +Note that these tasks will not remove themselves from this list +immediately upon resuming execution. +They will instead remain on the list until they execute the outermost +<tt>rcu_read_unlock()</tt> that ends their RCU read-side critical +section. + +<p> +The <tt>->wait_blkd_tasks</tt> field indicates whether or not +the current grace period is waiting on a blocked task. + +<h5>Sizing the <tt>rcu_node</tt> Array</h5> + +<p>The <tt>rcu_node</tt> array is sized via a series of +C-preprocessor expressions as follows: + +<pre> + 1 #ifdef CONFIG_RCU_FANOUT + 2 #define RCU_FANOUT CONFIG_RCU_FANOUT + 3 #else + 4 # ifdef CONFIG_64BIT + 5 # define RCU_FANOUT 64 + 6 # else + 7 # define RCU_FANOUT 32 + 8 # endif + 9 #endif +10 +11 #ifdef CONFIG_RCU_FANOUT_LEAF +12 #define RCU_FANOUT_LEAF CONFIG_RCU_FANOUT_LEAF +13 #else +14 # ifdef CONFIG_64BIT +15 # define RCU_FANOUT_LEAF 64 +16 # else +17 # define RCU_FANOUT_LEAF 32 +18 # endif +19 #endif +20 +21 #define RCU_FANOUT_1 (RCU_FANOUT_LEAF) +22 #define RCU_FANOUT_2 (RCU_FANOUT_1 * RCU_FANOUT) +23 #define RCU_FANOUT_3 (RCU_FANOUT_2 * RCU_FANOUT) +24 #define RCU_FANOUT_4 (RCU_FANOUT_3 * RCU_FANOUT) +25 +26 #if NR_CPUS <= RCU_FANOUT_1 +27 # define RCU_NUM_LVLS 1 +28 # define NUM_RCU_LVL_0 1 +29 # define NUM_RCU_NODES NUM_RCU_LVL_0 +30 # define NUM_RCU_LVL_INIT { NUM_RCU_LVL_0 } +31 # define RCU_NODE_NAME_INIT { "rcu_node_0" } +32 # define RCU_FQS_NAME_INIT { "rcu_node_fqs_0" } +33 # define RCU_EXP_NAME_INIT { "rcu_node_exp_0" } +34 #elif NR_CPUS <= RCU_FANOUT_2 +35 # define RCU_NUM_LVLS 2 +36 # define NUM_RCU_LVL_0 1 +37 # define NUM_RCU_LVL_1 DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_1) +38 # define NUM_RCU_NODES (NUM_RCU_LVL_0 + NUM_RCU_LVL_1) +39 # define NUM_RCU_LVL_INIT { NUM_RCU_LVL_0, NUM_RCU_LVL_1 } +40 # define RCU_NODE_NAME_INIT { "rcu_node_0", "rcu_node_1" } +41 # define RCU_FQS_NAME_INIT { "rcu_node_fqs_0", "rcu_node_fqs_1" } +42 # define RCU_EXP_NAME_INIT { "rcu_node_exp_0", "rcu_node_exp_1" } +43 #elif NR_CPUS <= RCU_FANOUT_3 +44 # define RCU_NUM_LVLS 3 +45 # define NUM_RCU_LVL_0 1 +46 # define NUM_RCU_LVL_1 DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_2) +47 # define NUM_RCU_LVL_2 DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_1) +48 # define NUM_RCU_NODES (NUM_RCU_LVL_0 + NUM_RCU_LVL_1 + NUM_RCU_LVL_2) +49 # define NUM_RCU_LVL_INIT { NUM_RCU_LVL_0, NUM_RCU_LVL_1, NUM_RCU_LVL_2 } +50 # define RCU_NODE_NAME_INIT { "rcu_node_0", "rcu_node_1", "rcu_node_2" } +51 # define RCU_FQS_NAME_INIT { "rcu_node_fqs_0", "rcu_node_fqs_1", "rcu_node_fqs_2" } +52 # define RCU_EXP_NAME_INIT { "rcu_node_exp_0", "rcu_node_exp_1", "rcu_node_exp_2" } +53 #elif NR_CPUS <= RCU_FANOUT_4 +54 # define RCU_NUM_LVLS 4 +55 # define NUM_RCU_LVL_0 1 +56 # define NUM_RCU_LVL_1 DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_3) +57 # define NUM_RCU_LVL_2 DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_2) +58 # define NUM_RCU_LVL_3 DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_1) +59 # define NUM_RCU_NODES (NUM_RCU_LVL_0 + NUM_RCU_LVL_1 + NUM_RCU_LVL_2 + NUM_RCU_LVL_3) +60 # define NUM_RCU_LVL_INIT { NUM_RCU_LVL_0, NUM_RCU_LVL_1, NUM_RCU_LVL_2, NUM_RCU_LVL_3 } +61 # define RCU_NODE_NAME_INIT { "rcu_node_0", "rcu_node_1", "rcu_node_2", "rcu_node_3" } +62 # define RCU_FQS_NAME_INIT { "rcu_node_fqs_0", "rcu_node_fqs_1", "rcu_node_fqs_2", "rcu_node_fqs_3" } +63 # define RCU_EXP_NAME_INIT { "rcu_node_exp_0", "rcu_node_exp_1", "rcu_node_exp_2", "rcu_node_exp_3" } +64 #else +65 # error "CONFIG_RCU_FANOUT insufficient for NR_CPUS" +66 #endif +</pre> + +<p>The maximum number of levels in the <tt>rcu_node</tt> structure +is currently limited to four, as specified by lines 21-24 +and the structure of the subsequent “if” statement. +For 32-bit systems, this allows 16*32*32*32=524,288 CPUs, which +should be sufficient for the next few years at least. +For 64-bit systems, 16*64*64*64=4,194,304 CPUs is allowed, which +should see us through the next decade or so. +This four-level tree also allows kernels built with +<tt>CONFIG_RCU_FANOUT=8</tt> to support up to 4096 CPUs, +which might be useful in very large systems having eight CPUs per +socket (but please note that no one has yet shown any measurable +performance degradation due to misaligned socket and <tt>rcu_node</tt> +boundaries). +In addition, building kernels with a full four levels of <tt>rcu_node</tt> +tree permits better testing of RCU's combining-tree code. + +</p><p>The <tt>RCU_FANOUT</tt> symbol controls how many children +are permitted at each non-leaf level of the <tt>rcu_node</tt> tree. +If the <tt>CONFIG_RCU_FANOUT</tt> Kconfig option is not specified, +it is set based on the word size of the system, which is also +the Kconfig default. + +</p><p>The <tt>RCU_FANOUT_LEAF</tt> symbol controls how many CPUs are +handled by each leaf <tt>rcu_node</tt> structure. +Experience has shown that allowing a given leaf <tt>rcu_node</tt> +structure to handle 64 CPUs, as permitted by the number of bits in +the <tt>->qsmask</tt> field on a 64-bit system, results in +excessive contention for the leaf <tt>rcu_node</tt> structures' +<tt>->lock</tt> fields. +The number of CPUs per leaf <tt>rcu_node</tt> structure is therefore +limited to 16 given the default value of <tt>CONFIG_RCU_FANOUT_LEAF</tt>. +If <tt>CONFIG_RCU_FANOUT_LEAF</tt> is unspecified, the value +selected is based on the word size of the system, just as for +<tt>CONFIG_RCU_FANOUT</tt>. +Lines 11-19 perform this computation. + +</p><p>Lines 21-24 compute the maximum number of CPUs supported by +a single-level (which contains a single <tt>rcu_node</tt> structure), +two-level, three-level, and four-level <tt>rcu_node</tt> tree, +respectively, given the fanout specified by <tt>RCU_FANOUT</tt> +and <tt>RCU_FANOUT_LEAF</tt>. +These numbers of CPUs are retained in the +<tt>RCU_FANOUT_1</tt>, +<tt>RCU_FANOUT_2</tt>, +<tt>RCU_FANOUT_3</tt>, and +<tt>RCU_FANOUT_4</tt> +C-preprocessor variables, respectively. + +</p><p>These variables are used to control the C-preprocessor <tt>#if</tt> +statement spanning lines 26-66 that computes the number of +<tt>rcu_node</tt> structures required for each level of the tree, +as well as the number of levels required. +The number of levels is placed in the <tt>NUM_RCU_LVLS</tt> +C-preprocessor variable by lines 27, 35, 44, and 54. +The number of <tt>rcu_node</tt> structures for the topmost level +of the tree is always exactly one, and this value is unconditionally +placed into <tt>NUM_RCU_LVL_0</tt> by lines 28, 36, 45, and 55. +The rest of the levels (if any) of the <tt>rcu_node</tt> tree +are computed by dividing the maximum number of CPUs by the +fanout supported by the number of levels from the current level down, +rounding up. This computation is performed by lines 37, +46-47, and 56-58. +Lines 31-33, 40-42, 50-52, and 62-63 create initializers +for lockdep lock-class names. +Finally, lines 64-66 produce an error if the maximum number of +CPUs is too large for the specified fanout. + +<h3><a name="The rcu_data Structure"> +The <tt>rcu_data</tt> Structure</a></h3> + +<p>The <tt>rcu_data</tt> maintains the per-CPU state for the +corresponding flavor of RCU. +The fields in this structure may be accessed only from the corresponding +CPU (and from tracing) unless otherwise stated. +This structure is the +focus of quiescent-state detection and RCU callback queuing. +It also tracks its relationship to the corresponding leaf +<tt>rcu_node</tt> structure to allow more-efficient +propagation of quiescent states up the <tt>rcu_node</tt> +combining tree. +Like the <tt>rcu_node</tt> structure, it provides a local +copy of the grace-period information to allow for-free +synchronized +access to this information from the corresponding CPU. +Finally, this structure records past dyntick-idle state +for the corresponding CPU and also tracks statistics. + +</p><p>The <tt>rcu_data</tt> structure's fields are discussed, +singly and in groups, in the following sections. + +<h5>Connection to Other Data Structures</h5> + +<p>This portion of the <tt>rcu_data</tt> structure is declared +as follows: + +<pre> + 1 int cpu; + 2 struct rcu_state *rsp; + 3 struct rcu_node *mynode; + 4 struct rcu_dynticks *dynticks; + 5 unsigned long grpmask; + 6 bool beenonline; +</pre> + +<p>The <tt>->cpu</tt> field contains the number of the +corresponding CPU, the <tt>->rsp</tt> pointer references +the corresponding <tt>rcu_state</tt> structure (and is most frequently +used to locate the name of the corresponding flavor of RCU for tracing), +and the <tt>->mynode</tt> field references the corresponding +<tt>rcu_node</tt> structure. +The <tt>->mynode</tt> is used to propagate quiescent states +up the combining tree. +<p>The <tt>->dynticks</tt> pointer references the +<tt>rcu_dynticks</tt> structure corresponding to this +CPU. +Recall that a single per-CPU instance of the <tt>rcu_dynticks</tt> +structure is shared among all flavors of RCU. +These first four fields are constant and therefore require not +synchronization. + +</p><p>The <tt>->grpmask</tt> field indicates the bit in +the <tt>->mynode->qsmask</tt> corresponding to this +<tt>rcu_data</tt> structure, and is also used when propagating +quiescent states. +The <tt>->beenonline</tt> flag is set whenever the corresponding +CPU comes online, which means that the debugfs tracing need not dump +out any <tt>rcu_data</tt> structure for which this flag is not set. + +<h5>Quiescent-State and Grace-Period Tracking</h5> + +<p>This portion of the <tt>rcu_data</tt> structure is declared +as follows: + +<pre> + 1 unsigned long completed; + 2 unsigned long gpnum; + 3 bool cpu_no_qs; + 4 bool core_needs_qs; + 5 bool gpwrap; + 6 unsigned long rcu_qs_ctr_snap; +</pre> + +<p>The <tt>completed</tt> and <tt>gpnum</tt> +fields are the counterparts of the fields of the same name +in the <tt>rcu_state</tt> and <tt>rcu_node</tt> structures. +They may each lag up to one behind their <tt>rcu_node</tt> +counterparts, but in <tt>CONFIG_NO_HZ_IDLE</tt> and +<tt>CONFIG_NO_HZ_FULL</tt> kernels can lag +arbitrarily far behind for CPUs in dyntick-idle mode (but these counters +will catch up upon exit from dyntick-idle mode). +If a given <tt>rcu_data</tt> structure's <tt>->gpnum</tt> and +<tt>->complete</tt> fields are equal, then this <tt>rcu_data</tt> +structure believes that RCU is idle. +Otherwise, as with the <tt>rcu_state</tt> and <tt>rcu_node</tt> +structure, +the <tt>->gpnum</tt> field will be one greater than the +<tt>->complete</tt> fields, with <tt>->gpnum</tt> +indicating which grace period this <tt>rcu_data</tt> believes +is still being waited for. + +<table> +<tr><th> </th></tr> +<tr><th align="left">Quick Quiz:</th></tr> +<tr><td> + All this replication of the grace period numbers can only cause + massive confusion. + Why not just keep a global pair of counters and be done with it??? +</td></tr> +<tr><th align="left">Answer:</th></tr> +<tr><td bgcolor="#ffffff"><font color="ffffff"> + Because if there was only a single global pair of grace-period + numbers, there would need to be a single global lock to allow + safely accessing and updating them. + And if we are not going to have a single global lock, we need + to carefully manage the numbers on a per-node basis. + Recall from the answer to a previous Quick Quiz that the consequences + of applying a previously sampled quiescent state to the wrong + grace period are quite severe. +</font></td></tr> +<tr><td> </td></tr> +</table> + +<p>The <tt>->cpu_no_qs</tt> flag indicates that the +CPU has not yet passed through a quiescent state, +while the <tt>->core_needs_qs</tt> flag indicates that the +RCU core needs a quiescent state from the corresponding CPU. +The <tt>->gpwrap</tt> field indicates that the corresponding +CPU has remained idle for so long that the <tt>completed</tt> +and <tt>gpnum</tt> counters are in danger of overflow, which +will cause the CPU to disregard the values of its counters on +its next exit from idle. +Finally, the <tt>rcu_qs_ctr_snap</tt> field is used to detect +cases where a given operation has resulted in a quiescent state +for all flavors of RCU, for example, <tt>cond_resched_rcu_qs()</tt>. + +<h5>RCU Callback Handling</h5> + +<p>In the absence of CPU-hotplug events, RCU callbacks are invoked by +the same CPU that registered them. +This is strictly a cache-locality optimization: callbacks can and +do get invoked on CPUs other than the one that registered them. +After all, if the CPU that registered a given callback has gone +offline before the callback can be invoked, there really is no other +choice. + +</p><p>This portion of the <tt>rcu_data</tt> structure is declared +as follows: + +<pre> + 1 struct rcu_head *nxtlist; + 2 struct rcu_head **nxttail[RCU_NEXT_SIZE]; + 3 unsigned long nxtcompleted[RCU_NEXT_SIZE]; + 4 long qlen_lazy; + 5 long qlen; + 6 long qlen_last_fqs_check; + 7 unsigned long n_force_qs_snap; + 8 unsigned long n_cbs_invoked; + 9 unsigned long n_cbs_orphaned; +10 unsigned long n_cbs_adopted; +11 long blimit; +</pre> + +<p>The <tt>->nxtlist</tt> pointer and the +<tt>->nxttail[]</tt> array form a four-segment list with +older callbacks near the head and newer ones near the tail. +Each segment contains callbacks with the corresponding relationship +to the current grace period. +The pointer out of the end of each of the four segments is referenced +by the element of the <tt>->nxttail[]</tt> array indexed by +<tt>RCU_DONE_TAIL</tt> (for callbacks handled by a prior grace period), +<tt>RCU_WAIT_TAIL</tt> (for callbacks waiting on the current grace period), +<tt>RCU_NEXT_READY_TAIL</tt> (for callbacks that will wait on the next +grace period), and +<tt>RCU_NEXT_TAIL</tt> (for callbacks that are not yet associated +with a specific grace period) +respectively, as shown in the following figure. + +</p><p><img src="nxtlist.svg" alt="nxtlist.svg" width="40%"> + +</p><p>In this figure, the <tt>->nxtlist</tt> pointer references the +first +RCU callback in the list. +The <tt>->nxttail[RCU_DONE_TAIL]</tt> array element references +the <tt>->nxtlist</tt> pointer itself, indicating that none +of the callbacks is ready to invoke. +The <tt>->nxttail[RCU_WAIT_TAIL]</tt> array element references callback +CB 2's <tt>->next</tt> pointer, which indicates that +CB 1 and CB 2 are both waiting on the current grace period. +The <tt>->nxttail[RCU_NEXT_READY_TAIL]</tt> array element +references the same RCU callback that <tt>->nxttail[RCU_WAIT_TAIL]</tt> +does, which indicates that there are no callbacks waiting on the next +RCU grace period. +The <tt>->nxttail[RCU_NEXT_TAIL]</tt> array element references +CB 4's <tt>->next</tt> pointer, indicating that all the +remaining RCU callbacks have not yet been assigned to an RCU grace +period. +Note that the <tt>->nxttail[RCU_NEXT_TAIL]</tt> array element +always references the last RCU callback's <tt>->next</tt> pointer +unless the callback list is empty, in which case it references +the <tt>->nxtlist</tt> pointer. + +</p><p>CPUs advance their callbacks from the +<tt>RCU_NEXT_TAIL</tt> to the <tt>RCU_NEXT_READY_TAIL</tt> to the +<tt>RCU_WAIT_TAIL</tt> to the <tt>RCU_DONE_TAIL</tt> list segments +as grace periods advance. +The CPU advances the callbacks in its <tt>rcu_data</tt> structure +whenever it notices that another RCU grace period has completed. +The CPU detects the completion of an RCU grace period by noticing +that the value of its <tt>rcu_data</tt> structure's +<tt>->completed</tt> field differs from that of its leaf +<tt>rcu_node</tt> structure. +Recall that each <tt>rcu_node</tt> structure's +<tt>->completed</tt> field is updated at the end of each +grace period. + +</p><p>The <tt>->nxtcompleted[]</tt> array records grace-period +numbers corresponding to the list segments. +This allows CPUs that go idle for extended periods to determine +which of their callbacks are ready to be invoked after reawakening. + +</p><p>The <tt>->qlen</tt> counter contains the number of +callbacks in <tt>->nxtlist</tt>, and the +<tt>->qlen_lazy</tt> contains the number of those callbacks that +are known to only free memory, and whose invocation can therefore +be safely deferred. +The <tt>->qlen_last_fqs_check</tt> and +<tt>->n_force_qs_snap</tt> coordinate the forcing of quiescent +states from <tt>call_rcu()</tt> and friends when callback +lists grow excessively long. + +</p><p>The <tt>->n_cbs_invoked</tt>, +<tt>->n_cbs_orphaned</tt>, and <tt>->n_cbs_adopted</tt> +fields count the number of callbacks invoked, +sent to other CPUs when this CPU goes offline, +and received from other CPUs when those other CPUs go offline. +Finally, the <tt>->blimit</tt> counter is the maximum number of +RCU callbacks that may be invoked at a given time. + +<h5>Dyntick-Idle Handling</h5> + +<p>This portion of the <tt>rcu_data</tt> structure is declared +as follows: + +<pre> + 1 int dynticks_snap; + 2 unsigned long dynticks_fqs; +</pre> + +The <tt>->dynticks_snap</tt> field is used to take a snapshot +of the corresponding CPU's dyntick-idle state when forcing +quiescent states, and is therefore accessed from other CPUs. +Finally, the <tt>->dynticks_fqs</tt> field is used to +count the number of times this CPU is determined to be in +dyntick-idle state, and is used for tracing and debugging purposes. + +<h3><a name="The rcu_dynticks Structure"> +The <tt>rcu_dynticks</tt> Structure</a></h3> + +<p>The <tt>rcu_dynticks</tt> maintains the per-CPU dyntick-idle state +for the corresponding CPU. +Unlike the other structures, <tt>rcu_dynticks</tt> is not +replicated over the different flavors of RCU. +The fields in this structure may be accessed only from the corresponding +CPU (and from tracing) unless otherwise stated. +Its fields are as follows: + +<pre> + 1 int dynticks_nesting; + 2 int dynticks_nmi_nesting; + 3 atomic_t dynticks; +</pre> + +<p>The <tt>->dynticks_nesting</tt> field counts the +nesting depth of normal interrupts. +In addition, this counter is incremented when exiting dyntick-idle +mode and decremented when entering it. +This counter can therefore be thought of as counting the number +of reasons why this CPU cannot be permitted to enter dyntick-idle +mode, aside from non-maskable interrupts (NMIs). +NMIs are counted by the <tt>->dynticks_nmi_nesting</tt> +field, except that NMIs that interrupt non-dyntick-idle execution +are not counted. + +</p><p>Finally, the <tt>->dynticks</tt> field counts the corresponding +CPU's transitions to and from dyntick-idle mode, so that this counter +has an even value when the CPU is in dyntick-idle mode and an odd +value otherwise. + +<table> +<tr><th> </th></tr> +<tr><th align="left">Quick Quiz:</th></tr> +<tr><td> + Why not just count all NMIs? + Wouldn't that be simpler and less error prone? +</td></tr> +<tr><th align="left">Answer:</th></tr> +<tr><td bgcolor="#ffffff"><font color="ffffff"> + It seems simpler only until you think hard about how to go about + updating the <tt>rcu_dynticks</tt> structure's + <tt>->dynticks</tt> field. +</font></td></tr> +<tr><td> </td></tr> +</table> + +<p>Additional fields are present for some special-purpose +builds, and are discussed separately. + +<h3><a name="The rcu_head Structure"> +The <tt>rcu_head</tt> Structure</a></h3> + +<p>Each <tt>rcu_head</tt> structure represents an RCU callback. +These structures are normally embedded within RCU-protected data +structures whose algorithms use asynchronous grace periods. +In contrast, when using algorithms that block waiting for RCU grace periods, +RCU users need not provide <tt>rcu_head</tt> structures. + +</p><p>The <tt>rcu_head</tt> structure has fields as follows: + +<pre> + 1 struct rcu_head *next; + 2 void (*func)(struct rcu_head *head); +</pre> + +<p>The <tt>->next</tt> field is used +to link the <tt>rcu_head</tt> structures together in the +lists within the <tt>rcu_data</tt> structures. +The <tt>->func</tt> field is a pointer to the function +to be called when the callback is ready to be invoked, and +this function is passed a pointer to the <tt>rcu_head</tt> +structure. +However, <tt>kfree_rcu()</tt> uses the <tt>->func</tt> +field to record the offset of the <tt>rcu_head</tt> +structure within the enclosing RCU-protected data structure. + +</p><p>Both of these fields are used internally by RCU. +From the viewpoint of RCU users, this structure is an +opaque “cookie”. + +<table> +<tr><th> </th></tr> +<tr><th align="left">Quick Quiz:</th></tr> +<tr><td> + Given that the callback function <tt>->func</tt> + is passed a pointer to the <tt>rcu_head</tt> structure, + how is that function supposed to find the beginning of the + enclosing RCU-protected data structure? +</td></tr> +<tr><th align="left">Answer:</th></tr> +<tr><td bgcolor="#ffffff"><font color="ffffff"> + In actual practice, there is a separate callback function per + type of RCU-protected data structure. + The callback function can therefore use the <tt>container_of()</tt> + macro in the Linux kernel (or other pointer-manipulation facilities + in other software environments) to find the beginning of the + enclosing structure. +</font></td></tr> +<tr><td> </td></tr> +</table> + +<h3><a name="RCU-Specific Fields in the task_struct Structure"> +RCU-Specific Fields in the <tt>task_struct</tt> Structure</a></h3> + +<p>The <tt>CONFIG_PREEMPT_RCU</tt> implementation uses some +additional fields in the <tt>task_struct</tt> structure: + +<pre> + 1 #ifdef CONFIG_PREEMPT_RCU + 2 int rcu_read_lock_nesting; + 3 union rcu_special rcu_read_unlock_special; + 4 struct list_head rcu_node_entry; + 5 struct rcu_node *rcu_blocked_node; + 6 #endif /* #ifdef CONFIG_PREEMPT_RCU */ + 7 #ifdef CONFIG_TASKS_RCU + 8 unsigned long rcu_tasks_nvcsw; + 9 bool rcu_tasks_holdout; +10 struct list_head rcu_tasks_holdout_list; +11 int rcu_tasks_idle_cpu; +12 #endif /* #ifdef CONFIG_TASKS_RCU */ +</pre> + +<p>The <tt>->rcu_read_lock_nesting</tt> field records the +nesting level for RCU read-side critical sections, and +the <tt>->rcu_read_unlock_special</tt> field is a bitmask +that records special conditions that require <tt>rcu_read_unlock()</tt> +to do additional work. +The <tt>->rcu_node_entry</tt> field is used to form lists of +tasks that have blocked within preemptible-RCU read-side critical +sections and the <tt>->rcu_blocked_node</tt> field references +the <tt>rcu_node</tt> structure whose list this task is a member of, +or <tt>NULL</tt> if it is not blocked within a preemptible-RCU +read-side critical section. + +<p>The <tt>->rcu_tasks_nvcsw</tt> field tracks the number of +voluntary context switches that this task had undergone at the +beginning of the current tasks-RCU grace period, +<tt>->rcu_tasks_holdout</tt> is set if the current tasks-RCU +grace period is waiting on this task, <tt>->rcu_tasks_holdout_list</tt> +is a list element enqueuing this task on the holdout list, +and <tt>->rcu_tasks_idle_cpu</tt> tracks which CPU this +idle task is running, but only if the task is currently running, +that is, if the CPU is currently idle. + +<h3><a name="Accessor Functions"> +Accessor Functions</a></h3> + +<p>The following listing shows the +<tt>rcu_get_root()</tt>, <tt>rcu_for_each_node_breadth_first</tt>, +<tt>rcu_for_each_nonleaf_node_breadth_first()</tt>, and +<tt>rcu_for_each_leaf_node()</tt> function and macros: + +<pre> + 1 static struct rcu_node *rcu_get_root(struct rcu_state *rsp) + 2 { + 3 return &rsp->node[0]; + 4 } + 5 + 6 #define rcu_for_each_node_breadth_first(rsp, rnp) \ + 7 for ((rnp) = &(rsp)->node[0]; \ + 8 (rnp) < &(rsp)->node[NUM_RCU_NODES]; (rnp)++) + 9 + 10 #define rcu_for_each_nonleaf_node_breadth_first(rsp, rnp) \ + 11 for ((rnp) = &(rsp)->node[0]; \ + 12 (rnp) < (rsp)->level[NUM_RCU_LVLS - 1]; (rnp)++) + 13 + 14 #define rcu_for_each_leaf_node(rsp, rnp) \ + 15 for ((rnp) = (rsp)->level[NUM_RCU_LVLS - 1]; \ + 16 (rnp) < &(rsp)->node[NUM_RCU_NODES]; (rnp)++) +</pre> + +<p>The <tt>rcu_get_root()</tt> simply returns a pointer to the +first element of the specified <tt>rcu_state</tt> structure's +<tt>->node[]</tt> array, which is the root <tt>rcu_node</tt> +structure. + +</p><p>As noted earlier, the <tt>rcu_for_each_node_breadth_first()</tt> +macro takes advantage of the layout of the <tt>rcu_node</tt> +structures in the <tt>rcu_state</tt> structure's +<tt>->node[]</tt> array, performing a breadth-first traversal by +simply traversing the array in order. +The <tt>rcu_for_each_nonleaf_node_breadth_first()</tt> macro operates +similarly, but traverses only the first part of the array, thus excluding +the leaf <tt>rcu_node</tt> structures. +Finally, the <tt>rcu_for_each_leaf_node()</tt> macro traverses only +the last part of the array, thus traversing only the leaf +<tt>rcu_node</tt> structures. + +<table> +<tr><th> </th></tr> +<tr><th align="left">Quick Quiz:</th></tr> +<tr><td> + What do <tt>rcu_for_each_nonleaf_node_breadth_first()</tt> and + <tt>rcu_for_each_leaf_node()</tt> do if the <tt>rcu_node</tt> tree + contains only a single node? +</td></tr> +<tr><th align="left">Answer:</th></tr> +<tr><td bgcolor="#ffffff"><font color="ffffff"> + In the single-node case, + <tt>rcu_for_each_nonleaf_node_breadth_first()</tt> is a no-op + and <tt>rcu_for_each_leaf_node()</tt> traverses the single node. +</font></td></tr> +<tr><td> </td></tr> +</table> + +<h3><a name="Summary"> +Summary</a></h3> + +So each flavor of RCU is represented by an <tt>rcu_state</tt> structure, +which contains a combining tree of <tt>rcu_node</tt> and +<tt>rcu_data</tt> structures. +Finally, in <tt>CONFIG_NO_HZ_IDLE</tt> kernels, each CPU's dyntick-idle +state is tracked by an <tt>rcu_dynticks</tt> structure. + +If you made it this far, you are well prepared to read the code +walkthroughs in the other articles in this series. + +<h3><a name="Acknowledgments"> +Acknowledgments</a></h3> + +I owe thanks to Cyrill Gorcunov, Mathieu Desnoyers, Dhaval Giani, Paul +Turner, Abhishek Srivastava, Matt Kowalczyk, and Serge Hallyn +for helping me get this document into a more human-readable state. + +<h3><a name="Legal Statement"> +Legal Statement</a></h3> + +<p>This work represents the view of the author and does not necessarily +represent the view of IBM. + +</p><p>Linux is a registered trademark of Linus Torvalds. + +</p><p>Other company, product, and service names may be trademarks or +service marks of others. + +</body></html> diff --git a/Documentation/RCU/Design/Data-Structures/HugeTreeClassicRCU.svg b/Documentation/RCU/Design/Data-Structures/HugeTreeClassicRCU.svg new file mode 100644 index 000000000000..2bf12b468206 --- /dev/null +++ b/Documentation/RCU/Design/Data-Structures/HugeTreeClassicRCU.svg @@ -0,0 +1,939 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- Creator: fig2dev Version 3.2 Patchlevel 5e --> + +<!-- CreationDate: Wed Dec 9 17:37:22 2015 --> + +<!-- Magnification: 3.000 --> + +<svg + xmlns:dc="http://purl.org/dc/elements/1.1/" + xmlns:cc="http://creativecommons.org/ns#" + xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" + xmlns:svg="http://www.w3.org/2000/svg" + xmlns="http://www.w3.org/2000/svg" + xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" + xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" + width="15.1in" + height="11.2in" + viewBox="-66 -66 18087 13407" + id="svg2" + version="1.1" + inkscape:version="0.48.4 r9939" + sodipodi:docname="HugeTreeClassicRCU.fig"> + <metadata + id="metadata224"> + <rdf:RDF> + <cc:Work + rdf:about=""> + <dc:format>image/svg+xml</dc:format> + <dc:type + rdf:resource="http://purl.org/dc/dcmitype/StillImage" /> + <dc:title></dc:title> + </cc:Work> + </rdf:RDF> + </metadata> + <defs + id="defs222"> + <marker + inkscape:stockid="Arrow1Mend" + orient="auto" + refY="0.0" + refX="0.0" + id="Arrow1Mend" + style="overflow:visible;"> + <path + id="path3982" + d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z " + style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;" + transform="scale(0.4) rotate(180) translate(10,0)" /> + </marker> + </defs> + <sodipodi:namedview + pagecolor="#ffffff" + bordercolor="#666666" + borderopacity="1" + objecttolerance="10" + gridtolerance="10" + guidetolerance="10" + inkscape:pageopacity="0" + inkscape:pageshadow="2" + inkscape:window-width="1134" + inkscape:window-height="789" + id="namedview220" + showgrid="false" + inkscape:zoom="0.60515873" + inkscape:cx="679.5" + inkscape:cy="504" + inkscape:window-x="786" + inkscape:window-y="24" + inkscape:window-maximized="0" + inkscape:current-layer="g4" /> + <g + style="stroke-width:.025in; fill:none" + id="g4"> + <!-- Line: box --> + <rect + x="450" + y="0" + width="17100" + height="8325" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffff00; " + id="rect6" /> + <!-- Line: box --> + <rect + x="11025" + y="3600" + width="2700" + height="1350" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect8" /> + <!-- Line: box --> + <rect + x="4275" + y="3600" + width="2700" + height="1350" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect10" /> + <!-- Line: box --> + <rect + x="5400" + y="6300" + width="2700" + height="1350" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect12" /> + <!-- Line: box --> + <rect + x="9900" + y="6300" + width="2700" + height="1350" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect14" /> + <!-- Line: box --> + <rect + x="14400" + y="6300" + width="2700" + height="1350" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect16" /> + <!-- Line: box --> + <rect + x="900" + y="6300" + width="2700" + height="1350" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect18" /> + <!-- Line: box --> + <rect + x="7650" + y="900" + width="2700" + height="1350" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect20" /> + <!-- Line --> + <polyline + points="3150,9225 3150,7746 " + style="stroke:#00d1d1;stroke-width:44.99790066;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline22" /> + <!-- Arrowhead on XXXpoint 3150 9225 - 3150 7560--> + <!-- Circle --> + <circle + cx="8550" + cy="4275" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle26" /> + <!-- Circle --> + <circle + cx="9000" + cy="4275" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle28" /> + <!-- Circle --> + <circle + cx="9450" + cy="4275" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle30" /> + <!-- Line --> + <polyline + points="6750,6300 8250,5010 " + style="stroke:#00d1d1;stroke-width:44.99790066;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline32" /> + <!-- Arrowhead on XXXpoint 6750 6300 - 8391 4890--> + <!-- Line --> + <polyline + points="11250,6300 9747,5010 " + style="stroke:#00d1d1;stroke-width:44.99790066;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline36" /> + <!-- Arrowhead on XXXpoint 11250 6300 - 9606 4890--> + <!-- Circle --> + <circle + cx="13950" + cy="6975" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle40" /> + <!-- Circle --> + <circle + cx="13500" + cy="6975" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle42" /> + <!-- Circle --> + <circle + cx="13050" + cy="6975" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle44" /> + <!-- Circle --> + <circle + cx="9450" + cy="6975" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle46" /> + <!-- Circle --> + <circle + cx="9000" + cy="6975" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle48" /> + <!-- Circle --> + <circle + cx="8550" + cy="6975" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle50" /> + <!-- Circle --> + <circle + cx="4950" + cy="6975" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle52" /> + <!-- Circle --> + <circle + cx="4500" + cy="6975" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle54" /> + <!-- Circle --> + <circle + cx="4050" + cy="6975" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle56" /> + <!-- Circle --> + <circle + cx="1800" + cy="8775" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle58" /> + <!-- Circle --> + <circle + cx="2250" + cy="8775" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle60" /> + <!-- Circle --> + <circle + cx="2700" + cy="8775" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle62" /> + <!-- Circle --> + <circle + cx="15300" + cy="8775" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle64" /> + <!-- Circle --> + <circle + cx="15750" + cy="8775" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle66" /> + <!-- Circle --> + <circle + cx="16200" + cy="8775" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle68" /> + <!-- Circle --> + <circle + cx="10800" + cy="8775" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle70" /> + <!-- Circle --> + <circle + cx="11250" + cy="8775" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle72" /> + <!-- Circle --> + <circle + cx="11700" + cy="8775" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle74" /> + <!-- Circle --> + <circle + cx="6300" + cy="8775" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle76" /> + <!-- Circle --> + <circle + cx="6750" + cy="8775" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle78" /> + <!-- Circle --> + <circle + cx="7200" + cy="8775" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle80" /> + <!-- Line: box --> + <rect + x="0" + y="11475" + width="2700" + height="1800" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; " + id="rect82" /> + <!-- Line: box --> + <rect + x="1800" + y="9225" + width="2700" + height="1800" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; " + id="rect84" /> + <!-- Line: box --> + <rect + x="4500" + y="11475" + width="2700" + height="1800" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; " + id="rect86" /> + <!-- Line: box --> + <rect + x="6300" + y="9270" + width="2700" + height="1800" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; " + id="rect88" /> + <!-- Line: box --> + <rect + x="8955" + y="11475" + width="2700" + height="1800" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; " + id="rect90" /> + <!-- Line: box --> + <rect + x="10755" + y="9270" + width="2700" + height="1800" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; " + id="rect92" /> + <!-- Line: box --> + <rect + x="13455" + y="11475" + width="2700" + height="1800" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; " + id="rect94" /> + <!-- Line: box --> + <rect + x="15255" + y="9270" + width="2700" + height="1800" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; " + id="rect96" /> + <!-- Line --> + <polyline + points="11700,3600 10197,2310 " + style="stroke:#00d1d1;stroke-width:44.99790066;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline98" /> + <!-- Arrowhead on XXXpoint 11700 3600 - 10056 2190--> + <!-- Line --> + <polyline + points="6300,3600 7800,2310 " + style="stroke:#00d1d1;stroke-width:44.99790066;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline102" /> + <!-- Arrowhead on XXXpoint 6300 3600 - 7941 2190--> + <!-- Line --> + <polyline + points="3150,6300 4650,5010 " + style="stroke:#00d1d1;stroke-width:44.99790066;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline106" /> + <!-- Arrowhead on XXXpoint 3150 6300 - 4791 4890--> + <!-- Line --> + <polyline + points="14850,6300 13347,5010 " + style="stroke:#00d1d1;stroke-width:44.99790066;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline110" /> + <!-- Arrowhead on XXXpoint 14850 6300 - 13206 4890--> + <!-- Line --> + <polyline + points="1350,11475 1350,7746 " + style="stroke:#00d1d1;stroke-width:44.99790066;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline114" /> + <!-- Arrowhead on XXXpoint 1350 11475 - 1350 7560--> + <!-- Line --> + <polyline + points="16650,9225 16650,7746 " + style="stroke:#00d1d1;stroke-width:44.99790066;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline118" /> + <!-- Arrowhead on XXXpoint 16650 9225 - 16650 7560--> + <!-- Line --> + <polyline + points="14850,11475 14850,7746 " + style="stroke:#00d1d1;stroke-width:44.99790066;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline122" /> + <!-- Arrowhead on XXXpoint 14850 11475 - 14850 7560--> + <!-- Line --> + <polyline + points="12150,9225 12150,7746 " + style="stroke:#00d1d1;stroke-width:44.99790066;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline126" /> + <!-- Arrowhead on XXXpoint 12150 9225 - 12150 7560--> + <!-- Line --> + <polyline + points="10350,11475 10350,7746 " + style="stroke:#00d1d1;stroke-width:44.99790066;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline130" /> + <!-- Arrowhead on XXXpoint 10350 11475 - 10350 7560--> + <!-- Line --> + <polyline + points="7650,9225 7650,7746 " + style="stroke:#00d1d1;stroke-width:44.99790066;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline134" /> + <!-- Arrowhead on XXXpoint 7650 9225 - 7650 7560--> + <!-- Line --> + <polyline + points="5850,11475 5850,7746 " + style="stroke:#00d1d1;stroke-width:44.99790066;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline138" /> + <!-- Arrowhead on XXXpoint 5850 11475 - 5850 7560--> + <!-- Text --> + <text + xml:space="preserve" + x="12375" + y="4500" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text142">rcu_node</text> + <!-- Text --> + <text + xml:space="preserve" + x="12375" + y="4050" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text144">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="5625" + y="4050" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text146">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="5625" + y="4500" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text148">rcu_node</text> + <!-- Text --> + <text + xml:space="preserve" + x="6750" + y="6750" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text150">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="6750" + y="7200" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text152">rcu_node</text> + <!-- Text --> + <text + xml:space="preserve" + x="11250" + y="7200" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text154">rcu_node</text> + <!-- Text --> + <text + xml:space="preserve" + x="11250" + y="6750" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text156">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="15750" + y="7200" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text158">rcu_node</text> + <!-- Text --> + <text + xml:space="preserve" + x="15750" + y="6750" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text160">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="2250" + y="6750" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text162">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="2250" + y="7200" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text164">rcu_node</text> + <!-- Text --> + <text + xml:space="preserve" + x="1350" + y="13050" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="324" + text-anchor="middle" + id="text166">CPU 0</text> + <!-- Text --> + <text + xml:space="preserve" + x="1350" + y="11925" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text168">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="1350" + y="12375" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text170">rcu_data</text> + <!-- Text --> + <text + xml:space="preserve" + x="3150" + y="10800" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="324" + text-anchor="middle" + id="text172">CPU 15</text> + <!-- Text --> + <text + xml:space="preserve" + x="3150" + y="9675" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text174">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="3150" + y="10125" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text176">rcu_data</text> + <!-- Text --> + <text + xml:space="preserve" + x="5850" + y="11925" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text178">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="5850" + y="12375" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text180">rcu_data</text> + <!-- Text --> + <text + xml:space="preserve" + x="5850" + y="13050" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="324" + text-anchor="middle" + id="text182">CPU 21823</text> + <!-- Text --> + <text + xml:space="preserve" + x="7650" + y="10845" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="324" + text-anchor="middle" + id="text184">CPU 21839</text> + <!-- Text --> + <text + xml:space="preserve" + x="7650" + y="10170" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text186">rcu_data</text> + <!-- Text --> + <text + xml:space="preserve" + x="7650" + y="9720" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text188">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="10305" + y="11925" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text190">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="10305" + y="12375" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text192">rcu_data</text> + <!-- Text --> + <text + xml:space="preserve" + x="10305" + y="13050" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="324" + text-anchor="middle" + id="text194">CPU 43679</text> + <!-- Text --> + <text + xml:space="preserve" + x="12105" + y="10845" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="324" + text-anchor="middle" + id="text196">CPU 43695</text> + <!-- Text --> + <text + xml:space="preserve" + x="12105" + y="10170" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text198">rcu_data</text> + <!-- Text --> + <text + xml:space="preserve" + x="12105" + y="9720" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text200">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="14805" + y="11925" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text202">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="14805" + y="12375" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text204">rcu_data</text> + <!-- Text --> + <text + xml:space="preserve" + x="14805" + y="13050" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="324" + text-anchor="middle" + id="text206">CPU 65519</text> + <!-- Text --> + <text + xml:space="preserve" + x="16605" + y="10845" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="324" + text-anchor="middle" + id="text208">CPU 65535</text> + <!-- Text --> + <text + xml:space="preserve" + x="16605" + y="10170" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text210">rcu_data</text> + <!-- Text --> + <text + xml:space="preserve" + x="16605" + y="9720" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text212">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="675" + y="450" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="start" + id="text214">struct rcu_state</text> + <!-- Text --> + <text + xml:space="preserve" + x="9000" + y="1350" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text216">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="9000" + y="1800" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text218">rcu_node</text> + </g> +</svg> diff --git a/Documentation/RCU/Design/Data-Structures/TreeLevel.svg b/Documentation/RCU/Design/Data-Structures/TreeLevel.svg new file mode 100644 index 000000000000..7a7eb3bac95c --- /dev/null +++ b/Documentation/RCU/Design/Data-Structures/TreeLevel.svg @@ -0,0 +1,828 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- Creator: fig2dev Version 3.2 Patchlevel 5e --> + +<!-- CreationDate: Wed Dec 9 17:41:29 2015 --> + +<!-- Magnification: 3.000 --> + +<svg + xmlns:dc="http://purl.org/dc/elements/1.1/" + xmlns:cc="http://creativecommons.org/ns#" + xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" + xmlns:svg="http://www.w3.org/2000/svg" + xmlns="http://www.w3.org/2000/svg" + xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" + xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" + width="17.7in" + height="10.4in" + viewBox="-66 -66 21237 12507" + id="svg2" + version="1.1" + inkscape:version="0.48.4 r9939" + sodipodi:docname="TreeLevel.fig"> + <metadata + id="metadata216"> + <rdf:RDF> + <cc:Work + rdf:about=""> + <dc:format>image/svg+xml</dc:format> + <dc:type + rdf:resource="http://purl.org/dc/dcmitype/StillImage" /> + <dc:title></dc:title> + </cc:Work> + </rdf:RDF> + </metadata> + <defs + id="defs214"> + <marker + inkscape:stockid="Arrow1Mend" + orient="auto" + refY="0.0" + refX="0.0" + id="Arrow1Mend" + style="overflow:visible;"> + <path + id="path3974" + d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z " + style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;" + transform="scale(0.4) rotate(180) translate(10,0)" /> + </marker> + </defs> + <sodipodi:namedview + pagecolor="#ffffff" + bordercolor="#666666" + borderopacity="1" + objecttolerance="10" + gridtolerance="10" + guidetolerance="10" + inkscape:pageopacity="0" + inkscape:pageshadow="2" + inkscape:window-width="1023" + inkscape:window-height="1148" + id="namedview212" + showgrid="false" + inkscape:zoom="0.55869424" + inkscape:cx="796.50006" + inkscape:cy="467.99997" + inkscape:window-x="897" + inkscape:window-y="24" + inkscape:window-maximized="0" + inkscape:current-layer="g4" /> + <g + style="stroke-width:.025in; fill:none" + id="g4"> + <!-- Line: box --> + <rect + x="0" + y="0" + width="20655" + height="8325" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffff00; " + id="rect6" /> + <!-- Line: box --> + <rect + x="14130" + y="3600" + width="2700" + height="1350" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect8" /> + <!-- Line: box --> + <rect + x="7380" + y="3600" + width="2700" + height="1350" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect10" /> + <!-- Line: box --> + <rect + x="8505" + y="6300" + width="2700" + height="1350" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect12" /> + <!-- Line: box --> + <rect + x="13005" + y="6300" + width="2700" + height="1350" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect14" /> + <!-- Line: box --> + <rect + x="17505" + y="6300" + width="2700" + height="1350" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect16" /> + <!-- Line: box --> + <rect + x="4005" + y="6300" + width="2700" + height="1350" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect18" /> + <!-- Line: box --> + <rect + x="10755" + y="900" + width="2700" + height="1350" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect20" /> + <!-- Line --> + <polyline + points="6255,9225 6255,7746 " + style="stroke:#00d1d1;stroke-width:45.00382345;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline22" /> + <!-- Arrowhead on XXXpoint 6255 9225 - 6255 7560--> + <!-- Circle --> + <circle + cx="11655" + cy="4275" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle26" /> + <!-- Circle --> + <circle + cx="12105" + cy="4275" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle28" /> + <!-- Circle --> + <circle + cx="12555" + cy="4275" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle30" /> + <!-- Line --> + <polyline + points="9855,6300 11355,5010 " + style="stroke:#00d1d1;stroke-width:45.00382345;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline32" /> + <!-- Arrowhead on XXXpoint 9855 6300 - 11496 4890--> + <!-- Line --> + <polyline + points="14355,6300 12852,5010 " + style="stroke:#00d1d1;stroke-width:45.00382345;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline36" /> + <!-- Arrowhead on XXXpoint 14355 6300 - 12711 4890--> + <!-- Circle --> + <circle + cx="17055" + cy="6975" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle40" /> + <!-- Circle --> + <circle + cx="16605" + cy="6975" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle42" /> + <!-- Circle --> + <circle + cx="16155" + cy="6975" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle44" /> + <!-- Circle --> + <circle + cx="12555" + cy="6975" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle46" /> + <!-- Circle --> + <circle + cx="12105" + cy="6975" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle48" /> + <!-- Circle --> + <circle + cx="11655" + cy="6975" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle50" /> + <!-- Circle --> + <circle + cx="8055" + cy="6975" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle52" /> + <!-- Circle --> + <circle + cx="7605" + cy="6975" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle54" /> + <!-- Circle --> + <circle + cx="7155" + cy="6975" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle56" /> + <!-- Circle --> + <circle + cx="4905" + cy="8775" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle58" /> + <!-- Circle --> + <circle + cx="5355" + cy="8775" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle60" /> + <!-- Circle --> + <circle + cx="5805" + cy="8775" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle62" /> + <!-- Circle --> + <circle + cx="18405" + cy="8775" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle64" /> + <!-- Circle --> + <circle + cx="18855" + cy="8775" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle66" /> + <!-- Circle --> + <circle + cx="19305" + cy="8775" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle68" /> + <!-- Circle --> + <circle + cx="13905" + cy="8775" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle70" /> + <!-- Circle --> + <circle + cx="14355" + cy="8775" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle72" /> + <!-- Circle --> + <circle + cx="14805" + cy="8775" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle74" /> + <!-- Circle --> + <circle + cx="9405" + cy="8775" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle76" /> + <!-- Circle --> + <circle + cx="9855" + cy="8775" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle78" /> + <!-- Circle --> + <circle + cx="10305" + cy="8775" + r="114" + style="fill:#000000;stroke:#000000;stroke-width:21;" + id="circle80" /> + <!-- Line: box --> + <rect + x="225" + y="1125" + width="3150" + height="1125" + rx="0" + style="stroke:#000000;stroke-width:21; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffffff; " + id="rect82" /> + <!-- Line: box --> + <rect + x="225" + y="2250" + width="3150" + height="1125" + rx="0" + style="stroke:#000000;stroke-width:21; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffffff; " + id="rect84" /> + <!-- Line: box --> + <rect + x="225" + y="3375" + width="3150" + height="1125" + rx="0" + style="stroke:#000000;stroke-width:21; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffffff; " + id="rect86" /> + <!-- Line --> + <polyline + points="14805,3600 13302,2310 " + style="stroke:#00d1d1;stroke-width:45.00382345;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline88" /> + <!-- Arrowhead on XXXpoint 14805 3600 - 13161 2190--> + <!-- Line --> + <polyline + points="9405,3600 10905,2310 " + style="stroke:#00d1d1;stroke-width:45.00382345;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline92" /> + <!-- Arrowhead on XXXpoint 9405 3600 - 11046 2190--> + <!-- Line --> + <polyline + points="6255,6300 7755,5010 " + style="stroke:#00d1d1;stroke-width:45.00382345;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline96" /> + <!-- Arrowhead on XXXpoint 6255 6300 - 7896 4890--> + <!-- Line --> + <polyline + points="17955,6300 16452,5010 " + style="stroke:#00d1d1;stroke-width:45.00382345;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline100" /> + <!-- Arrowhead on XXXpoint 17955 6300 - 16311 4890--> + <!-- Line --> + <polyline + points="4455,11025 4455,7746 " + style="stroke:#00d1d1;stroke-width:45.00382345;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline104" /> + <!-- Arrowhead on XXXpoint 4455 11025 - 4455 7560--> + <!-- Line --> + <polyline + points="19755,9225 19755,7746 " + style="stroke:#00d1d1;stroke-width:45.00382345;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline108" /> + <!-- Arrowhead on XXXpoint 19755 9225 - 19755 7560--> + <!-- Line --> + <polyline + points="17955,11025 17955,7746 " + style="stroke:#00d1d1;stroke-width:45.00382345;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline112" /> + <!-- Arrowhead on XXXpoint 17955 11025 - 17955 7560--> + <!-- Line --> + <polyline + points="15255,9225 15255,7746 " + style="stroke:#00d1d1;stroke-width:45.00382345;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline116" /> + <!-- Arrowhead on XXXpoint 15255 9225 - 15255 7560--> + <!-- Line --> + <polyline + points="13455,11025 13455,7746 " + style="stroke:#00d1d1;stroke-width:45.00382345;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline120" /> + <!-- Arrowhead on XXXpoint 13455 11025 - 13455 7560--> + <!-- Line --> + <polyline + points="10755,9225 10755,7746 " + style="stroke:#00d1d1;stroke-width:45.00382345;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline124" /> + <!-- Arrowhead on XXXpoint 10755 9225 - 10755 7560--> + <!-- Line --> + <polyline + points="8955,11025 8955,7746 " + style="stroke:#00d1d1;stroke-width:45.00382345;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline128" /> + <!-- Arrowhead on XXXpoint 8955 11025 - 8955 7560--> + <!-- Line: box --> + <rect + x="12105" + y="11025" + width="2700" + height="1350" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; " + id="rect132" /> + <!-- Line: box --> + <rect + x="13905" + y="9225" + width="2700" + height="1350" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; " + id="rect134" /> + <!-- Line: box --> + <rect + x="16605" + y="11025" + width="2700" + height="1350" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; " + id="rect136" /> + <!-- Line: box --> + <rect + x="18405" + y="9225" + width="2700" + height="1350" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; " + id="rect138" /> + <!-- Line: box --> + <rect + x="9405" + y="9225" + width="2700" + height="1350" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; " + id="rect140" /> + <!-- Line: box --> + <rect + x="7605" + y="11025" + width="2700" + height="1350" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; " + id="rect142" /> + <!-- Line: box --> + <rect + x="4905" + y="9225" + width="2700" + height="1350" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; " + id="rect144" /> + <!-- Line: box --> + <rect + x="3105" + y="11025" + width="2700" + height="1350" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; " + id="rect146" /> + <!-- Line --> + <polyline + points="3375,1575 10701,1575 " + style="stroke:#000000;stroke-width:45.00382345;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline148" /> + <!-- Arrowhead on XXXpoint 3375 1575 - 10890 1575--> + <!-- Line --> + <polyline + points="3375,3825 4050,3825 4050,5400 2700,5400 2700,6975 3951,6975 " + style="stroke:#000000;stroke-width:45.00382345;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline152" /> + <!-- Arrowhead on XXXpoint 2700 6975 - 4140 6975--> + <!-- Line --> + <polyline + points="3375,2700 5175,2700 5175,4275 7326,4275 " + style="stroke:#000000;stroke-width:45.00382345;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline156" /> + <!-- Arrowhead on XXXpoint 5175 4275 - 7515 4275--> + <!-- Text --> + <text + xml:space="preserve" + x="15480" + y="4500" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text160">rcu_node</text> + <!-- Text --> + <text + xml:space="preserve" + x="15480" + y="4050" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text162">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="8730" + y="4050" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text164">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="8730" + y="4500" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text166">rcu_node</text> + <!-- Text --> + <text + xml:space="preserve" + x="9855" + y="6750" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text168">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="9855" + y="7200" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text170">rcu_node</text> + <!-- Text --> + <text + xml:space="preserve" + x="14355" + y="7200" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text172">rcu_node</text> + <!-- Text --> + <text + xml:space="preserve" + x="14355" + y="6750" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text174">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="18855" + y="7200" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text176">rcu_node</text> + <!-- Text --> + <text + xml:space="preserve" + x="18855" + y="6750" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text178">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="5355" + y="6750" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text180">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="5355" + y="7200" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text182">rcu_node</text> + <!-- Text --> + <text + xml:space="preserve" + x="450" + y="1800" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="324" + text-anchor="start" + id="text184">->level[0]</text> + <!-- Text --> + <text + xml:space="preserve" + x="450" + y="2925" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="324" + text-anchor="start" + id="text186">->level[1]</text> + <!-- Text --> + <text + xml:space="preserve" + x="450" + y="4050" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="324" + text-anchor="start" + id="text188">->level[2]</text> + <!-- Text --> + <text + xml:space="preserve" + x="12105" + y="1350" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text190">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="12105" + y="1800" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="middle" + id="text192">rcu_node</text> + <!-- Text --> + <text + xml:space="preserve" + x="6255" + y="10125" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="324" + text-anchor="middle" + id="text194">CPU 15</text> + <!-- Text --> + <text + xml:space="preserve" + x="4455" + y="11925" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="324" + text-anchor="middle" + id="text196">CPU 0</text> + <!-- Text --> + <text + xml:space="preserve" + x="19755" + y="10125" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="324" + text-anchor="middle" + id="text198">CPU 65535</text> + <!-- Text --> + <text + xml:space="preserve" + x="17955" + y="11925" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="324" + text-anchor="middle" + id="text200">CPU 65519</text> + <!-- Text --> + <text + xml:space="preserve" + x="15255" + y="10125" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="324" + text-anchor="middle" + id="text202">CPU 43695</text> + <!-- Text --> + <text + xml:space="preserve" + x="13455" + y="11925" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="324" + text-anchor="middle" + id="text204">CPU 43679</text> + <!-- Text --> + <text + xml:space="preserve" + x="10755" + y="10125" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="324" + text-anchor="middle" + id="text206">CPU 21839</text> + <!-- Text --> + <text + xml:space="preserve" + x="8955" + y="11925" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="324" + text-anchor="middle" + id="text208">CPU 21823</text> + <!-- Text --> + <text + xml:space="preserve" + x="225" + y="450" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="288" + text-anchor="start" + id="text210">struct rcu_state</text> + </g> +</svg> diff --git a/Documentation/RCU/Design/Data-Structures/TreeMapping.svg b/Documentation/RCU/Design/Data-Structures/TreeMapping.svg new file mode 100644 index 000000000000..729cfa9e6cdb --- /dev/null +++ b/Documentation/RCU/Design/Data-Structures/TreeMapping.svg @@ -0,0 +1,305 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- Creator: fig2dev Version 3.2 Patchlevel 5e --> + +<!-- CreationDate: Wed Dec 9 17:43:22 2015 --> + +<!-- Magnification: 1.000 --> + +<svg + xmlns:dc="http://purl.org/dc/elements/1.1/" + xmlns:cc="http://creativecommons.org/ns#" + xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" + xmlns:svg="http://www.w3.org/2000/svg" + xmlns="http://www.w3.org/2000/svg" + xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" + xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" + width="3.1in" + height="0.9in" + viewBox="-12 -12 3699 1074" + id="svg2" + version="1.1" + inkscape:version="0.48.4 r9939" + sodipodi:docname="TreeMapping.fig"> + <metadata + id="metadata66"> + <rdf:RDF> + <cc:Work + rdf:about=""> + <dc:format>image/svg+xml</dc:format> + <dc:type + rdf:resource="http://purl.org/dc/dcmitype/StillImage" /> + <dc:title></dc:title> + </cc:Work> + </rdf:RDF> + </metadata> + <defs + id="defs64"> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0.0" + refX="0.0" + id="Arrow2Lend" + style="overflow:visible;"> + <path + id="path3836" + style="fill-rule:evenodd;stroke-width:0.62500000;stroke-linejoin:round;" + d="M 8.7185878,4.0337352 L -2.2072895,0.016013256 L 8.7185884,-4.0017078 C 6.9730900,-1.6296469 6.9831476,1.6157441 8.7185878,4.0337352 z " + transform="scale(1.1) rotate(180) translate(1,0)" /> + </marker> + <marker + inkscape:stockid="Arrow2Mend" + orient="auto" + refY="0.0" + refX="0.0" + id="Arrow2Mend" + style="overflow:visible;"> + <path + id="path3842" + style="fill-rule:evenodd;stroke-width:0.62500000;stroke-linejoin:round;" + d="M 8.7185878,4.0337352 L -2.2072895,0.016013256 L 8.7185884,-4.0017078 C 6.9730900,-1.6296469 6.9831476,1.6157441 8.7185878,4.0337352 z " + transform="scale(0.6) rotate(180) translate(0,0)" /> + </marker> + <marker + inkscape:stockid="Arrow1Mend" + orient="auto" + refY="0.0" + refX="0.0" + id="Arrow1Mend" + style="overflow:visible;"> + <path + id="path3824" + d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z " + style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;" + transform="scale(0.4) rotate(180) translate(10,0)" /> + </marker> + </defs> + <sodipodi:namedview + pagecolor="#ffffff" + bordercolor="#666666" + borderopacity="1" + objecttolerance="10" + gridtolerance="10" + guidetolerance="10" + inkscape:pageopacity="0" + inkscape:pageshadow="2" + inkscape:window-width="991" + inkscape:window-height="606" + id="namedview62" + showgrid="false" + inkscape:zoom="3.0752688" + inkscape:cx="139.5" + inkscape:cy="40.5" + inkscape:window-x="891" + inkscape:window-y="177" + inkscape:window-maximized="0" + inkscape:current-layer="g4" /> + <g + style="stroke-width:.025in; fill:none" + id="g4"> + <!-- Line: box --> + <rect + x="0" + y="0" + width="3675" + height="1050" + rx="0" + style="stroke:#000000;stroke-width:7; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffff00; " + id="rect6" /> + <!-- Line: box --> + <rect + x="75" + y="375" + width="375" + height="300" + rx="0" + style="stroke:#000000;stroke-width:7; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect8" /> + <!-- Line: box --> + <rect + x="600" + y="375" + width="375" + height="300" + rx="0" + style="stroke:#000000;stroke-width:7; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect10" /> + <!-- Line: box --> + <rect + x="1125" + y="375" + width="375" + height="300" + rx="0" + style="stroke:#000000;stroke-width:7; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect12" /> + <!-- Line: box --> + <rect + x="1650" + y="375" + width="375" + height="300" + rx="0" + style="stroke:#000000;stroke-width:7; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect14" /> + <!-- Line: box --> + <rect + x="2175" + y="375" + width="375" + height="300" + rx="0" + style="stroke:#000000;stroke-width:7; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect16" /> + <!-- Line: box --> + <rect + x="3225" + y="375" + width="375" + height="300" + rx="0" + style="stroke:#000000;stroke-width:7; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect18" /> + <!-- Line --> + <polyline + points="675,375 675,150 300,150 300,358 " + style="stroke:#000000;stroke-width:7.00088889;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow2Lend)" + id="polyline20" /> + <!-- Arrowhead on XXXpoint 300 150 - 300 390--> + <!-- Line --> + <polyline + points="1200,675 1200,900 300,900 300,691 " + style="stroke:#000000;stroke-width:7.00088889;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow2Lend)" + id="polyline24" /> + <!-- Arrowhead on XXXpoint 300 900 - 300 660--> + <!-- Line --> + <polyline + points="1725,375 1725,150 900,150 900,358 " + style="stroke:#000000;stroke-width:7.00088889;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow2Lend)" + id="polyline28" /> + <!-- Arrowhead on XXXpoint 900 150 - 900 390--> + <!-- Line --> + <polyline + points="2250,375 2250,75 825,75 825,358 " + style="stroke:#000000;stroke-width:7.00088889;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow2Lend)" + id="polyline32" /> + <!-- Arrowhead on XXXpoint 825 75 - 825 390--> + <!-- Line --> + <polyline + points="2775,675 2775,900 1425,900 1425,691 " + style="stroke:#000000;stroke-width:7.00088889;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow2Lend)" + id="polyline36" /> + <!-- Arrowhead on XXXpoint 1425 900 - 1425 660--> + <!-- Line --> + <polyline + points="3300,675 3300,975 1350,975 1350,691 " + style="stroke:#000000;stroke-width:7.00088889;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow2Lend)" + id="polyline40" /> + <!-- Arrowhead on XXXpoint 1350 975 - 1350 660--> + <!-- Line: box --> + <rect + x="2700" + y="375" + width="375" + height="300" + rx="0" + style="stroke:#000000;stroke-width:7; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect44" /> + <!-- Text --> + <text + xml:space="preserve" + x="300" + y="525" + fill="#000000" + font-family="Times" + font-style="normal" + font-weight="normal" + font-size="96" + text-anchor="middle" + id="text46">0:7 </text> + <!-- Text --> + <text + xml:space="preserve" + x="1350" + y="525" + fill="#000000" + font-family="Times" + font-style="normal" + font-weight="normal" + font-size="96" + text-anchor="middle" + id="text48">4:7 </text> + <!-- Text --> + <text + xml:space="preserve" + x="1875" + y="525" + fill="#000000" + font-family="Times" + font-style="normal" + font-weight="normal" + font-size="96" + text-anchor="middle" + id="text50">0:1 </text> + <!-- Text --> + <text + xml:space="preserve" + x="2400" + y="525" + fill="#000000" + font-family="Times" + font-style="normal" + font-weight="normal" + font-size="96" + text-anchor="middle" + id="text52">2:3 </text> + <!-- Text --> + <text + xml:space="preserve" + x="2925" + y="525" + fill="#000000" + font-family="Times" + font-style="normal" + font-weight="normal" + font-size="96" + text-anchor="middle" + id="text54">4:5 </text> + <!-- Text --> + <text + xml:space="preserve" + x="3450" + y="525" + fill="#000000" + font-family="Times" + font-style="normal" + font-weight="normal" + font-size="96" + text-anchor="middle" + id="text56">6:7 </text> + <!-- Text --> + <text + xml:space="preserve" + x="825" + y="525" + fill="#000000" + font-family="Times" + font-style="normal" + font-weight="normal" + font-size="96" + text-anchor="middle" + id="text58">0:3 </text> + <!-- Text --> + <text + xml:space="preserve" + x="3600" + y="150" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="normal" + font-size="96" + text-anchor="end" + id="text60">struct rcu_state</text> + </g> +</svg> diff --git a/Documentation/RCU/Design/Data-Structures/TreeMappingLevel.svg b/Documentation/RCU/Design/Data-Structures/TreeMappingLevel.svg new file mode 100644 index 000000000000..5b416a4b8453 --- /dev/null +++ b/Documentation/RCU/Design/Data-Structures/TreeMappingLevel.svg @@ -0,0 +1,380 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- Creator: fig2dev Version 3.2 Patchlevel 5e --> + +<!-- CreationDate: Wed Dec 9 17:45:19 2015 --> + +<!-- Magnification: 1.000 --> + +<svg + xmlns:dc="http://purl.org/dc/elements/1.1/" + xmlns:cc="http://creativecommons.org/ns#" + xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" + xmlns:svg="http://www.w3.org/2000/svg" + xmlns="http://www.w3.org/2000/svg" + xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" + xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" + width="3.1in" + height="1.8in" + viewBox="-12 -12 3699 2124" + id="svg2" + version="1.1" + inkscape:version="0.48.4 r9939" + sodipodi:docname="TreeMappingLevel.svg"> + <metadata + id="metadata98"> + <rdf:RDF> + <cc:Work + rdf:about=""> + <dc:format>image/svg+xml</dc:format> + <dc:type + rdf:resource="http://purl.org/dc/dcmitype/StillImage" /> + <dc:title /> + </cc:Work> + </rdf:RDF> + </metadata> + <defs + id="defs96"> + <marker + inkscape:stockid="Arrow2Lend" + orient="auto" + refY="0.0" + refX="0.0" + id="Arrow2Lend" + style="overflow:visible;"> + <path + id="path3868" + style="fill-rule:evenodd;stroke-width:0.62500000;stroke-linejoin:round;" + d="M 8.7185878,4.0337352 L -2.2072895,0.016013256 L 8.7185884,-4.0017078 C 6.9730900,-1.6296469 6.9831476,1.6157441 8.7185878,4.0337352 z " + transform="scale(1.1) rotate(180) translate(1,0)" /> + </marker> + </defs> + <sodipodi:namedview + pagecolor="#ffffff" + bordercolor="#666666" + borderopacity="1" + objecttolerance="10" + gridtolerance="10" + guidetolerance="10" + inkscape:pageopacity="0" + inkscape:pageshadow="2" + inkscape:window-width="1598" + inkscape:window-height="1211" + id="namedview94" + showgrid="false" + inkscape:zoom="5.2508961" + inkscape:cx="139.5" + inkscape:cy="81" + inkscape:window-x="840" + inkscape:window-y="122" + inkscape:window-maximized="0" + inkscape:current-layer="g4" /> + <g + style="stroke-width:.025in; fill:none" + id="g4"> + <!-- Line: box --> + <rect + x="0" + y="0" + width="3675" + height="2100" + rx="0" + style="stroke:#000000;stroke-width:7; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffff00; " + id="rect6" /> + <!-- Line: box --> + <rect + x="75" + y="1350" + width="750" + height="225" + rx="0" + style="stroke:#000000;stroke-width:7; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect8" /> + <!-- Line: box --> + <rect + x="75" + y="1575" + width="750" + height="225" + rx="0" + style="stroke:#000000;stroke-width:7; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect10" /> + <!-- Line: box --> + <rect + x="75" + y="1800" + width="750" + height="225" + rx="0" + style="stroke:#000000;stroke-width:7; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect12" /> + <!-- Arc --> + <path + style="stroke:#000000;stroke-width:7;stroke-linecap:butt;" + d="M 1800,900 A 118 118 0 0 0 1800 1125 " + id="path14" /> + <!-- Arc --> + <path + style="stroke:#000000;stroke-width:7;stroke-linecap:butt;" + d="M 750,900 A 75 75 0 0 0 750 1050 " + id="path16" /> + <!-- Line --> + <polyline + points="750,900 750,691 " + style="stroke:#000000;stroke-width:7.00025806;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow2Lend)" + id="polyline18" /> + <!-- Arrowhead on XXXpoint 750 900 - 750 660--> + <!-- Line: box --> + <rect + x="75" + y="375" + width="375" + height="300" + rx="0" + style="stroke:#000000;stroke-width:7; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect22" /> + <!-- Line: box --> + <rect + x="600" + y="375" + width="375" + height="300" + rx="0" + style="stroke:#000000;stroke-width:7; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect24" /> + <!-- Line: box --> + <rect + x="1650" + y="375" + width="375" + height="300" + rx="0" + style="stroke:#000000;stroke-width:7; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect26" /> + <!-- Line: box --> + <rect + x="2175" + y="375" + width="375" + height="300" + rx="0" + style="stroke:#000000;stroke-width:7; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect28" /> + <!-- Line: box --> + <rect + x="3225" + y="375" + width="375" + height="300" + rx="0" + style="stroke:#000000;stroke-width:7; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect30" /> + <!-- Line --> + <polyline + points="675,375 675,150 300,150 300,358 " + style="stroke:#000000;stroke-width:7.00025806;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow2Lend)" + id="polyline32" /> + <!-- Arrowhead on XXXpoint 300 150 - 300 390--> + <!-- Line --> + <polyline + points="1725,375 1725,150 900,150 900,358 " + style="stroke:#000000;stroke-width:7.00025806;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow2Lend)" + id="polyline36" /> + <!-- Arrowhead on XXXpoint 900 150 - 900 390--> + <!-- Line --> + <polyline + points="2250,375 2250,75 825,75 825,358 " + style="stroke:#000000;stroke-width:7.00025806;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow2Lend)" + id="polyline40" /> + <!-- Arrowhead on XXXpoint 825 75 - 825 390--> + <!-- Line --> + <polyline + points="2775,675 2775,975 1425,975 1425,691 " + style="stroke:#000000;stroke-width:7.00025806;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow2Lend)" + id="polyline44" /> + <!-- Arrowhead on XXXpoint 1425 975 - 1425 660--> + <!-- Line: box --> + <rect + x="2700" + y="375" + width="375" + height="300" + rx="0" + style="stroke:#000000;stroke-width:7; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect48" /> + <!-- Line: box --> + <rect + x="1125" + y="375" + width="375" + height="300" + rx="0" + style="stroke:#000000;stroke-width:7; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect50" /> + <!-- Line --> + <polyline + points="3300,675 3300,1050 1350,1050 1350,691 " + style="stroke:#000000;stroke-width:7.00025806;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow2Lend)" + id="polyline52" /> + <!-- Arrowhead on XXXpoint 1350 1050 - 1350 660--> + <!-- Line --> + <polyline + points="825,1425 975,1425 975,1200 225,1200 225,691 " + style="stroke:#000000;stroke-width:7.00025806;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow2Lend)" + id="polyline56" /> + <!-- Arrowhead on XXXpoint 225 1200 - 225 660--> + <!-- Line --> + <polyline + points="1200,675 1200,975 300,975 300,691 " + style="stroke:#000000;stroke-width:7.00025806;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow2Lend)" + id="polyline60" /> + <!-- Arrowhead on XXXpoint 300 975 - 300 660--> + <!-- Text --> + <text + xml:space="preserve" + x="150" + y="1500" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="108" + text-anchor="start" + id="text64">->level[0]</text> + <!-- Text --> + <text + xml:space="preserve" + x="150" + y="1725" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="108" + text-anchor="start" + id="text66">->level[1]</text> + <!-- Text --> + <text + xml:space="preserve" + x="150" + y="1950" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="108" + text-anchor="start" + id="text68">->level[2]</text> + <!-- Text --> + <text + xml:space="preserve" + x="300" + y="525" + fill="#000000" + font-family="Times" + font-style="normal" + font-weight="normal" + font-size="96" + text-anchor="middle" + id="text70">0:7 </text> + <!-- Text --> + <text + xml:space="preserve" + x="1350" + y="525" + fill="#000000" + font-family="Times" + font-style="normal" + font-weight="normal" + font-size="96" + text-anchor="middle" + id="text72">4:7 </text> + <!-- Text --> + <text + xml:space="preserve" + x="1875" + y="525" + fill="#000000" + font-family="Times" + font-style="normal" + font-weight="normal" + font-size="96" + text-anchor="middle" + id="text74">0:1 </text> + <!-- Text --> + <text + xml:space="preserve" + x="2400" + y="525" + fill="#000000" + font-family="Times" + font-style="normal" + font-weight="normal" + font-size="96" + text-anchor="middle" + id="text76">2:3 </text> + <!-- Text --> + <text + xml:space="preserve" + x="2925" + y="525" + fill="#000000" + font-family="Times" + font-style="normal" + font-weight="normal" + font-size="96" + text-anchor="middle" + id="text78">4:5 </text> + <!-- Text --> + <text + xml:space="preserve" + x="3450" + y="525" + fill="#000000" + font-family="Times" + font-style="normal" + font-weight="normal" + font-size="96" + text-anchor="middle" + id="text80">6:7 </text> + <!-- Text --> + <text + xml:space="preserve" + x="825" + y="525" + fill="#000000" + font-family="Times" + font-style="normal" + font-weight="normal" + font-size="96" + text-anchor="middle" + id="text82">0:3 </text> + <!-- Text --> + <text + xml:space="preserve" + x="3600" + y="150" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="normal" + font-size="96" + text-anchor="end" + id="text84">struct rcu_state</text> + <!-- Line --> + <polyline + points="825,1875 1800,1875 1800,1125 " + style="stroke:#000000;stroke-width:7.00025806;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:none" + id="polyline86" /> + <!-- Line --> + <polyline + points="1800,900 1800,691 " + style="stroke:#000000;stroke-width:7.00025806;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow2Lend)" + id="polyline88" /> + <!-- Arrowhead on XXXpoint 1800 900 - 1800 660--> + <!-- Line --> + <polyline + points="825,1650 1200,1650 1200,1125 750,1125 750,1050 " + style="stroke:#000000;stroke-width:7; stroke-linejoin:miter; stroke-linecap:butt; " + id="polyline92" /> + </g> +</svg> diff --git a/Documentation/RCU/Design/Data-Structures/blkd_task.svg b/Documentation/RCU/Design/Data-Structures/blkd_task.svg new file mode 100644 index 000000000000..00e810bb8419 --- /dev/null +++ b/Documentation/RCU/Design/Data-Structures/blkd_task.svg @@ -0,0 +1,843 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- Creator: fig2dev Version 3.2 Patchlevel 5e --> + +<!-- CreationDate: Wed Dec 9 17:35:03 2015 --> + +<!-- Magnification: 2.000 --> + +<svg + xmlns:dc="http://purl.org/dc/elements/1.1/" + xmlns:cc="http://creativecommons.org/ns#" + xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" + xmlns:svg="http://www.w3.org/2000/svg" + xmlns="http://www.w3.org/2000/svg" + xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" + xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" + width="10.1in" + height="8.6in" + viewBox="-44 -44 12088 10288" + id="svg2" + version="1.1" + inkscape:version="0.48.4 r9939" + sodipodi:docname="blkd_task.fig"> + <metadata + id="metadata212"> + <rdf:RDF> + <cc:Work + rdf:about=""> + <dc:format>image/svg+xml</dc:format> + <dc:type + rdf:resource="http://purl.org/dc/dcmitype/StillImage" /> + <dc:title></dc:title> + </cc:Work> + </rdf:RDF> + </metadata> + <defs + id="defs210"> + <marker + inkscape:stockid="Arrow1Mend" + orient="auto" + refY="0.0" + refX="0.0" + id="Arrow1Mend" + style="overflow:visible;"> + <path + id="path3970" + d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z " + style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;" + transform="scale(0.4) rotate(180) translate(10,0)" /> + </marker> + </defs> + <sodipodi:namedview + pagecolor="#ffffff" + bordercolor="#666666" + borderopacity="1" + objecttolerance="10" + gridtolerance="10" + guidetolerance="10" + inkscape:pageopacity="0" + inkscape:pageshadow="2" + inkscape:window-width="1087" + inkscape:window-height="1144" + id="namedview208" + showgrid="false" + inkscape:zoom="1.0495049" + inkscape:cx="454.50003" + inkscape:cy="387.00003" + inkscape:window-x="833" + inkscape:window-y="28" + inkscape:window-maximized="0" + inkscape:current-layer="g4" /> + <g + style="stroke-width:.025in; fill:none" + id="g4"> + <!-- Line: box --> + <rect + x="450" + y="0" + width="6300" + height="7350" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffffff; " + id="rect6" /> + <!-- Line: box --> + <rect + x="4950" + y="4950" + width="1500" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + id="rect8" /> + <!-- Line: box --> + <rect + x="750" + y="600" + width="5700" + height="3750" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffff00; " + id="rect10" /> + <!-- Line --> + <polyline + points="5250,8100 5688,5912 " + style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " + id="polyline12" /> + <!-- Arrowhead on XXXpoint 5250 8100 - 5710 5790--> + <polyline + points="5714 6068 5704 5822 5598 6044 " + style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " + id="polyline14" /> + <!-- Line --> + <polyline + points="4050,9300 4486,7262 " + style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " + id="polyline16" /> + <!-- Arrowhead on XXXpoint 4050 9300 - 4512 7140--> + <polyline + points="4514 7418 4506 7172 4396 7394 " + style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " + id="polyline18" /> + <!-- Line --> + <polyline + points="1040,9300 1476,7262 " + style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " + id="polyline20" /> + <!-- Arrowhead on XXXpoint 1040 9300 - 1502 7140--> + <polyline + points="1504 7418 1496 7172 1386 7394 " + style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " + id="polyline22" /> + <!-- Line --> + <polyline + points="2240,8100 2676,6062 " + style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " + id="polyline24" /> + <!-- Arrowhead on XXXpoint 2240 8100 - 2702 5940--> + <polyline + points="2704 6218 2696 5972 2586 6194 " + style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " + id="polyline26" /> + <!-- Line: box --> + <rect + x="0" + y="450" + width="6300" + height="7350" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffffff; " + id="rect28" /> + <!-- Line: box --> + <rect + x="300" + y="1050" + width="5700" + height="3750" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffff00; " + id="rect30" /> + <!-- Line --> + <polyline + points="1350,3450 2350,2590 " + style="stroke:#00d1d1;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline32" /> + <!-- Arrowhead on XXXpoint 1350 3450 - 2444 2510--> + <!-- Line --> + <polyline + points="4950,3450 3948,2590 " + style="stroke:#00d1d1;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline36" /> + <!-- Arrowhead on XXXpoint 4950 3450 - 3854 2510--> + <!-- Line --> + <polyline + points="4050,6600 4050,4414 " + style="stroke:#00d1d1;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline40" /> + <!-- Arrowhead on XXXpoint 4050 6600 - 4050 4290--> + <!-- Line --> + <polyline + points="1050,6600 1050,4414 " + style="stroke:#00d1d1;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline44" /> + <!-- Arrowhead on XXXpoint 1050 6600 - 1050 4290--> + <!-- Line --> + <polyline + points="2250,5400 2250,4414 " + style="stroke:#00d1d1;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline48" /> + <!-- Arrowhead on XXXpoint 2250 5400 - 2250 4290--> + <!-- Line --> + <polyline + points="2250,8100 2250,6364 " + style="stroke:#00ff00;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline52" /> + <!-- Arrowhead on XXXpoint 2250 8100 - 2250 6240--> + <!-- Line --> + <polyline + points="1050,9300 1050,7564 " + style="stroke:#00ff00;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline56" /> + <!-- Arrowhead on XXXpoint 1050 9300 - 1050 7440--> + <!-- Line --> + <polyline + points="4050,9300 4050,7564 " + style="stroke:#00ff00;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline60" /> + <!-- Arrowhead on XXXpoint 4050 9300 - 4050 7440--> + <!-- Line --> + <polyline + points="5250,8100 5250,6364 " + style="stroke:#00ff00;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline64" /> + <!-- Arrowhead on XXXpoint 5250 8100 - 5250 6240--> + <!-- Circle --> + <circle + cx="2850" + cy="3900" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle68" /> + <!-- Circle --> + <circle + cx="3150" + cy="3900" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle70" /> + <!-- Circle --> + <circle + cx="3450" + cy="3900" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle72" /> + <!-- Circle --> + <circle + cx="1350" + cy="5100" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle74" /> + <!-- Circle --> + <circle + cx="1650" + cy="5100" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle76" /> + <!-- Circle --> + <circle + cx="1950" + cy="5100" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle78" /> + <!-- Circle --> + <circle + cx="4350" + cy="5100" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle80" /> + <!-- Circle --> + <circle + cx="4650" + cy="5100" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle82" /> + <!-- Circle --> + <circle + cx="4950" + cy="5100" + r="76" + style="fill:#000000;stroke:#000000;stroke-width:14;" + id="circle84" /> + <!-- Line: box --> + <rect + x="750" + y="3450" + width="1800" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect86" /> + <!-- Line: box --> + <rect + x="300" + y="6600" + width="1500" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + id="rect88" /> + <!-- Line: box --> + <rect + x="4500" + y="5400" + width="1500" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + id="rect90" /> + <!-- Line: box --> + <rect + x="3300" + y="6600" + width="1500" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + id="rect92" /> + <!-- Line: box --> + <rect + x="2250" + y="1650" + width="1800" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect94" /> + <!-- Line: box --> + <rect + x="0" + y="9300" + width="2100" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " + id="rect96" /> + <!-- Line: box --> + <rect + x="1350" + y="8100" + width="2100" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " + id="rect98" /> + <!-- Line: box --> + <rect + x="3000" + y="9300" + width="2100" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " + id="rect100" /> + <!-- Line: box --> + <rect + x="4350" + y="8100" + width="2100" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " + id="rect102" /> + <!-- Line: box --> + <rect + x="1500" + y="5400" + width="1500" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + id="rect104" /> + <!-- Line --> + <polygon + points="5550,3450 7350,2850 7350,5100 5550,4350 5550,3450 " + style="stroke:#000000;stroke-width:14; stroke-linejoin:miter; stroke-linecap:butt; stroke-dasharray:120 120;fill:#ffbfbf; " + id="polygon106" /> + <!-- Line --> + <polyline + points="9300,3150 10734,3150 " + style="stroke:#000000;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline108" /> + <!-- Arrowhead on XXXpoint 9300 3150 - 10860 3150--> + <!-- Line: box --> + <rect + x="10800" + y="2850" + width="1200" + height="750" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " + id="rect112" /> + <!-- Line --> + <polyline + points="11400,3600 11400,4284 " + style="stroke:#000000;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline114" /> + <!-- Arrowhead on XXXpoint 11400 3600 - 11400 4410--> + <!-- Line: box --> + <rect + x="10800" + y="4350" + width="1200" + height="750" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " + id="rect118" /> + <!-- Line --> + <polyline + points="11400,5100 11400,5784 " + style="stroke:#000000;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline120" /> + <!-- Arrowhead on XXXpoint 11400 5100 - 11400 5910--> + <!-- Line: box --> + <rect + x="10800" + y="5850" + width="1200" + height="750" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " + id="rect124" /> + <!-- Line --> + <polyline + points="9300,3900 9900,3900 9900,4650 10734,4650 " + style="stroke:#000000;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline126" /> + <!-- Arrowhead on XXXpoint 9900 4650 - 10860 4650--> + <!-- Line --> + <polyline + points="9300,4650 9600,4650 9600,6150 10734,6150 " + style="stroke:#000000;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline130" /> + <!-- Arrowhead on XXXpoint 9600 6150 - 10860 6150--> + <!-- Text --> + <text + xml:space="preserve" + x="6450" + y="300" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="192" + text-anchor="end" + id="text134">rcu_bh</text> + <!-- Text --> + <text + xml:space="preserve" + x="3150" + y="1950" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text136">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="3150" + y="2250" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text138">rcu_node</text> + <!-- Text --> + <text + xml:space="preserve" + x="1650" + y="3750" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text140">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="1650" + y="4050" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text142">rcu_node</text> + <!-- Text --> + <text + xml:space="preserve" + x="2250" + y="5700" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text144">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="2250" + y="6000" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text146">rcu_data</text> + <!-- Text --> + <text + xml:space="preserve" + x="1050" + y="6900" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text148">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="1050" + y="7200" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text150">rcu_data</text> + <!-- Text --> + <text + xml:space="preserve" + x="5250" + y="5700" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text152">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="5250" + y="6000" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text154">rcu_data</text> + <!-- Text --> + <text + xml:space="preserve" + x="4050" + y="6900" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text156">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="4050" + y="7200" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text158">rcu_data</text> + <!-- Text --> + <text + xml:space="preserve" + x="450" + y="1350" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="start" + id="text160">struct rcu_state</text> + <!-- Text --> + <text + xml:space="preserve" + x="1050" + y="9600" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text162">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="1050" + y="9900" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text164">rcu_dynticks</text> + <!-- Text --> + <text + xml:space="preserve" + x="4050" + y="9600" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text166">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="4050" + y="9900" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text168">rcu_dynticks</text> + <!-- Text --> + <text + xml:space="preserve" + x="2400" + y="8400" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text170">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="2400" + y="8700" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text172">rcu_dynticks</text> + <!-- Text --> + <text + xml:space="preserve" + x="5400" + y="8400" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text174">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="5400" + y="8700" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text176">rcu_dynticks</text> + <!-- Text --> + <text + xml:space="preserve" + x="6000" + y="750" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="192" + text-anchor="end" + id="text178">rcu_sched</text> + <!-- Text --> + <text + xml:space="preserve" + x="11400" + y="3300" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="216" + text-anchor="middle" + id="text180">T3</text> + <!-- Text --> + <text + xml:space="preserve" + x="11400" + y="4800" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="216" + text-anchor="middle" + id="text182">T2</text> + <!-- Text --> + <text + xml:space="preserve" + x="11400" + y="6300" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="216" + text-anchor="middle" + id="text184">T1</text> + <!-- Line --> + <polyline + points="5250,5400 5250,4414 " + style="stroke:#00d1d1;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline186" /> + <!-- Arrowhead on XXXpoint 5250 5400 - 5250 4290--> + <!-- Line: box --> + <rect + x="3750" + y="3450" + width="1800" + height="900" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect190" /> + <!-- Line: box --> + <rect + x="7350" + y="2850" + width="1950" + height="750" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect192" /> + <!-- Line: box --> + <rect + x="7350" + y="3600" + width="1950" + height="750" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect194" /> + <!-- Line: box --> + <rect + x="7350" + y="4350" + width="1950" + height="750" + rx="0" + style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + id="rect196" /> + <!-- Text --> + <text + xml:space="preserve" + x="4650" + y="4050" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text198">rcu_node</text> + <!-- Text --> + <text + xml:space="preserve" + x="4650" + y="3750" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="middle" + id="text200">struct</text> + <!-- Text --> + <text + xml:space="preserve" + x="7500" + y="3300" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="start" + id="text202">blkd_tasks</text> + <!-- Text --> + <text + xml:space="preserve" + x="7500" + y="4050" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="start" + id="text204">gp_tasks</text> + <!-- Text --> + <text + xml:space="preserve" + x="7500" + y="4800" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="192" + text-anchor="start" + id="text206">exp_tasks</text> + </g> +</svg> diff --git a/Documentation/RCU/Design/Data-Structures/nxtlist.svg b/Documentation/RCU/Design/Data-Structures/nxtlist.svg new file mode 100644 index 000000000000..abc4cc73a097 --- /dev/null +++ b/Documentation/RCU/Design/Data-Structures/nxtlist.svg @@ -0,0 +1,396 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- Creator: fig2dev Version 3.2 Patchlevel 5e --> + +<!-- CreationDate: Wed Dec 9 17:39:46 2015 --> + +<!-- Magnification: 3.000 --> + +<svg + xmlns:dc="http://purl.org/dc/elements/1.1/" + xmlns:cc="http://creativecommons.org/ns#" + xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" + xmlns:svg="http://www.w3.org/2000/svg" + xmlns="http://www.w3.org/2000/svg" + xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" + xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" + width="10.4in" + height="10.4in" + viewBox="-66 -66 12507 12507" + id="svg2" + version="1.1" + inkscape:version="0.48.4 r9939" + sodipodi:docname="nxtlist.fig"> + <metadata + id="metadata94"> + <rdf:RDF> + <cc:Work + rdf:about=""> + <dc:format>image/svg+xml</dc:format> + <dc:type + rdf:resource="http://purl.org/dc/dcmitype/StillImage" /> + <dc:title></dc:title> + </cc:Work> + </rdf:RDF> + </metadata> + <defs + id="defs92"> + <marker + inkscape:stockid="Arrow1Mend" + orient="auto" + refY="0.0" + refX="0.0" + id="Arrow1Mend" + style="overflow:visible;"> + <path + id="path3852" + d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z " + style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;" + transform="scale(0.4) rotate(180) translate(10,0)" /> + </marker> + </defs> + <sodipodi:namedview + pagecolor="#ffffff" + bordercolor="#666666" + borderopacity="1" + objecttolerance="10" + gridtolerance="10" + guidetolerance="10" + inkscape:pageopacity="0" + inkscape:pageshadow="2" + inkscape:window-width="925" + inkscape:window-height="928" + id="namedview90" + showgrid="false" + inkscape:zoom="0.80021373" + inkscape:cx="467.99997" + inkscape:cy="467.99997" + inkscape:window-x="948" + inkscape:window-y="73" + inkscape:window-maximized="0" + inkscape:current-layer="g4" /> + <g + style="stroke-width:.025in; fill:none" + id="g4"> + <!-- Line: box --> + <rect + x="0" + y="0" + width="7875" + height="1125" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + id="rect6" /> + <!-- Line: box --> + <rect + x="0" + y="1125" + width="7875" + height="1125" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + id="rect8" /> + <!-- Line: box --> + <rect + x="0" + y="2250" + width="7875" + height="1125" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + id="rect10" /> + <!-- Line: box --> + <rect + x="0" + y="3375" + width="7875" + height="1125" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + id="rect12" /> + <!-- Line: box --> + <rect + x="0" + y="4500" + width="7875" + height="1125" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + id="rect14" /> + <!-- Line: box --> + <rect + x="10575" + y="0" + width="1800" + height="1125" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; " + id="rect16" /> + <!-- Line: box --> + <rect + x="10575" + y="1125" + width="1800" + height="1125" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; " + id="rect18" /> + <!-- Line --> + <polyline + points="11475,2250 11475,3276 " + style="stroke:#000000;stroke-width:45.00382345;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline20" /> + <!-- Arrowhead on XXXpoint 11475 2250 - 11475 3465--> + <!-- Line: box --> + <rect + x="10575" + y="6750" + width="1800" + height="1125" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; " + id="rect24" /> + <!-- Line: box --> + <rect + x="10575" + y="7875" + width="1800" + height="1125" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; " + id="rect26" /> + <!-- Line: box --> + <rect + x="10575" + y="10125" + width="1800" + height="1125" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; " + id="rect28" /> + <!-- Line: box --> + <rect + x="10575" + y="11250" + width="1800" + height="1125" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; " + id="rect30" /> + <!-- Line: box --> + <rect + x="10575" + y="3375" + width="1800" + height="1125" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; " + id="rect32" /> + <!-- Line --> + <polyline + points="11475,5625 11475,6651 " + style="stroke:#000000;stroke-width:45.00382345;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline34" /> + <!-- Arrowhead on XXXpoint 11475 5625 - 11475 6840--> + <!-- Line --> + <polyline + points="7875,225 10476,225 " + style="stroke:#000000;stroke-width:45.00382345;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline38" /> + <!-- Arrowhead on XXXpoint 7875 225 - 10665 225--> + <!-- Line --> + <polyline + points="7875,1350 9675,1350 9675,675 7971,675 " + style="stroke:#000000;stroke-width:45.00382345;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline42" /> + <!-- Arrowhead on XXXpoint 9675 675 - 7785 675--> + <!-- Line --> + <polyline + points="7875,2475 9675,2475 9675,4725 10476,4725 " + style="stroke:#000000;stroke-width:45.00382345;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline46" /> + <!-- Arrowhead on XXXpoint 9675 4725 - 10665 4725--> + <!-- Line --> + <polyline + points="7875,3600 9225,3600 9225,5175 10476,5175 " + style="stroke:#000000;stroke-width:45.00382345;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline50" /> + <!-- Arrowhead on XXXpoint 9225 5175 - 10665 5175--> + <!-- Line --> + <polyline + points="7875,4725 8775,4725 8775,11475 10476,11475 " + style="stroke:#000000;stroke-width:45.00382345;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline54" /> + <!-- Arrowhead on XXXpoint 8775 11475 - 10665 11475--> + <!-- Line: box --> + <rect + x="10575" + y="4500" + width="1800" + height="1125" + rx="0" + style="stroke:#000000;stroke-width:45; stroke-linejoin:miter; stroke-linecap:butt; " + id="rect58" /> + <!-- Line --> + <polyline + points="11475,9000 11475,10026 " + style="stroke:#000000;stroke-width:45.00382345;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline60" /> + <!-- Arrowhead on XXXpoint 11475 9000 - 11475 10215--> + <!-- Text --> + <text + xml:space="preserve" + x="225" + y="675" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="324" + text-anchor="start" + id="text64">nxtlist</text> + <!-- Text --> + <text + xml:space="preserve" + x="225" + y="1800" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="324" + text-anchor="start" + id="text66">nxttail[RCU_DONE_TAIL]</text> + <!-- Text --> + <text + xml:space="preserve" + x="225" + y="2925" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="324" + text-anchor="start" + id="text68">nxttail[RCU_WAIT_TAIL]</text> + <!-- Text --> + <text + xml:space="preserve" + x="225" + y="4050" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="324" + text-anchor="start" + id="text70">nxttail[RCU_NEXT_READY_TAIL]</text> + <!-- Text --> + <text + xml:space="preserve" + x="225" + y="5175" + fill="#000000" + font-family="Courier" + font-style="normal" + font-weight="bold" + font-size="324" + text-anchor="start" + id="text72">nxttail[RCU_NEXT_TAIL]</text> + <!-- Text --> + <text + xml:space="preserve" + x="11475" + y="675" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="324" + text-anchor="middle" + id="text74">CB 1</text> + <!-- Text --> + <text + xml:space="preserve" + x="11475" + y="1800" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="324" + text-anchor="middle" + id="text76">next</text> + <!-- Text --> + <text + xml:space="preserve" + x="11475" + y="7425" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="324" + text-anchor="middle" + id="text78">CB 3</text> + <!-- Text --> + <text + xml:space="preserve" + x="11475" + y="8550" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="324" + text-anchor="middle" + id="text80">next</text> + <!-- Text --> + <text + xml:space="preserve" + x="11475" + y="10800" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="324" + text-anchor="middle" + id="text82">CB 4</text> + <!-- Text --> + <text + xml:space="preserve" + x="11475" + y="11925" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="324" + text-anchor="middle" + id="text84">next</text> + <!-- Text --> + <text + xml:space="preserve" + x="11475" + y="4050" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="324" + text-anchor="middle" + id="text86">CB 2</text> + <!-- Text --> + <text + xml:space="preserve" + x="11475" + y="5175" + fill="#000000" + font-family="Helvetica" + font-style="normal" + font-weight="normal" + font-size="324" + text-anchor="middle" + id="text88">next</text> + </g> +</svg> diff --git a/Documentation/RCU/Design/Requirements/2013-08-is-it-dead.png b/Documentation/RCU/Design/Requirements/2013-08-is-it-dead.png Binary files differdeleted file mode 100644 index 7496a55e4e7b..000000000000 --- a/Documentation/RCU/Design/Requirements/2013-08-is-it-dead.png +++ /dev/null diff --git a/Documentation/RCU/Design/Requirements/RCUApplicability.svg b/Documentation/RCU/Design/Requirements/RCUApplicability.svg deleted file mode 100644 index ebcbeee391ed..000000000000 --- a/Documentation/RCU/Design/Requirements/RCUApplicability.svg +++ /dev/null @@ -1,237 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" standalone="no"?> -<!-- Creator: fig2dev Version 3.2 Patchlevel 5d --> - -<!-- CreationDate: Tue Mar 4 18:34:25 2014 --> - -<!-- Magnification: 3.000 --> - -<svg - xmlns:dc="http://purl.org/dc/elements/1.1/" - xmlns:cc="http://creativecommons.org/ns#" - xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" - xmlns:svg="http://www.w3.org/2000/svg" - xmlns="http://www.w3.org/2000/svg" - xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" - xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" - width="1089.1382" - height="668.21368" - viewBox="-2121 -36 14554.634 8876.4061" - id="svg2" - version="1.1" - inkscape:version="0.48.3.1 r9886" - sodipodi:docname="RCUApplicability.svg"> - <metadata - id="metadata40"> - <rdf:RDF> - <cc:Work - rdf:about=""> - <dc:format>image/svg+xml</dc:format> - <dc:type - rdf:resource="http://purl.org/dc/dcmitype/StillImage" /> - <dc:title /> - </cc:Work> - </rdf:RDF> - </metadata> - <defs - id="defs38" /> - <sodipodi:namedview - pagecolor="#ffffff" - bordercolor="#666666" - borderopacity="1" - objecttolerance="10" - gridtolerance="10" - guidetolerance="10" - inkscape:pageopacity="0" - inkscape:pageshadow="2" - inkscape:window-width="849" - inkscape:window-height="639" - id="namedview36" - showgrid="false" - inkscape:zoom="0.51326165" - inkscape:cx="544.56912" - inkscape:cy="334.10686" - inkscape:window-x="149" - inkscape:window-y="448" - inkscape:window-maximized="0" - inkscape:current-layer="g4" - fit-margin-top="5" - fit-margin-left="5" - fit-margin-right="5" - fit-margin-bottom="5" /> - <g - style="fill:none;stroke-width:0.025in" - id="g4" - transform="translate(-2043.6828,14.791398)"> - <!-- Line: box --> - <rect - x="0" - y="0" - width="14400" - height="8775" - rx="0" - style="fill:#ffa1a1;stroke:#000000;stroke-width:21;stroke-linecap:butt;stroke-linejoin:miter" - id="rect6" /> - <!-- Line: box --> - <rect - x="1350" - y="0" - width="11700" - height="6075" - rx="0" - style="fill:#ffff00;stroke:#000000;stroke-width:21;stroke-linecap:butt;stroke-linejoin:miter" - id="rect8" /> - <!-- Line: box --> - <rect - x="2700" - y="0" - width="9000" - height="4275" - rx="0" - style="fill:#00ff00;stroke:#000000;stroke-width:21;stroke-linecap:butt;stroke-linejoin:miter" - id="rect10" /> - <!-- Line: box --> - <rect - x="4050" - y="0" - width="6300" - height="2475" - rx="0" - style="fill:#87cfff;stroke:#000000;stroke-width:21;stroke-linecap:butt;stroke-linejoin:miter" - id="rect12" /> - <!-- Text --> - <text - xml:space="preserve" - x="7200" - y="900" - font-style="normal" - font-weight="normal" - font-size="324" - id="text14" - sodipodi:linespacing="125%" - style="font-size:427.63009644px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;font-family:Nimbus Sans L;-inkscape-font-specification:Nimbus Sans L"><tspan - style="font-size:427.63009644px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;font-family:Nimbus Sans L;-inkscape-font-specification:Nimbus Sans L" - id="tspan3017">Read-Mostly, Stale &</tspan></text> - <!-- Text --> - <text - xml:space="preserve" - x="7200" - y="1350" - font-style="normal" - font-weight="normal" - font-size="324" - id="text16" - sodipodi:linespacing="125%" - style="font-size:427.63009644px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;font-family:Nimbus Sans L;-inkscape-font-specification:Nimbus Sans L"><tspan - style="font-size:427.63009644px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;font-family:Nimbus Sans L;-inkscape-font-specification:Nimbus Sans L" - id="tspan3019">Inconsistent Data OK</tspan></text> - <!-- Text --> - <text - xml:space="preserve" - x="7200" - y="1800" - font-style="normal" - font-weight="normal" - font-size="324" - id="text18" - sodipodi:linespacing="125%" - style="font-size:427.63009644px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;font-family:Nimbus Sans L;-inkscape-font-specification:Nimbus Sans L"><tspan - style="font-size:427.63009644px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;font-family:Nimbus Sans L;-inkscape-font-specification:Nimbus Sans L" - id="tspan3021">(RCU Works Great!!!)</tspan></text> - <!-- Text --> - <text - xml:space="preserve" - x="7200" - y="3825" - font-style="normal" - font-weight="normal" - font-size="324" - id="text20" - sodipodi:linespacing="125%" - style="font-size:427.63009644px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;font-family:Nimbus Sans L;-inkscape-font-specification:Nimbus Sans L"><tspan - style="font-size:427.63009644px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;font-family:Nimbus Sans L;-inkscape-font-specification:Nimbus Sans L" - id="tspan3023">(RCU Works Well)</tspan></text> - <!-- Text --> - <text - xml:space="preserve" - x="7200" - y="3375" - font-style="normal" - font-weight="normal" - font-size="324" - id="text22" - sodipodi:linespacing="125%" - style="font-size:427.63009644px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;font-family:Nimbus Sans L;-inkscape-font-specification:Nimbus Sans L"><tspan - style="font-size:427.63009644px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;font-family:Nimbus Sans L;-inkscape-font-specification:Nimbus Sans L" - id="tspan3025">Read-Mostly, Need Consistent Data</tspan></text> - <!-- Text --> - <text - xml:space="preserve" - x="7200" - y="5175" - font-style="normal" - font-weight="normal" - font-size="324" - id="text24" - sodipodi:linespacing="125%" - style="font-size:427.63009644px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;font-family:Nimbus Sans L;-inkscape-font-specification:Nimbus Sans L"><tspan - style="font-size:427.63009644px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;font-family:Nimbus Sans L;-inkscape-font-specification:Nimbus Sans L" - id="tspan3027">Read-Write, Need Consistent Data</tspan></text> - <!-- Text --> - <text - xml:space="preserve" - x="7200" - y="6975" - font-style="normal" - font-weight="normal" - font-size="324" - id="text26" - style="font-size:427.63009644px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;font-family:Nimbus Sans L;-inkscape-font-specification:Nimbus Sans L" - sodipodi:linespacing="125%">Update-Mostly, Need Consistent Data</text> - <!-- Text --> - <text - xml:space="preserve" - x="7200" - y="5625" - font-style="normal" - font-weight="normal" - font-size="324" - id="text28" - sodipodi:linespacing="125%" - style="font-size:427.63009644px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;font-family:Nimbus Sans L;-inkscape-font-specification:Nimbus Sans L"><tspan - style="font-size:427.63009644px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;font-family:Nimbus Sans L;-inkscape-font-specification:Nimbus Sans L" - id="tspan3029">(RCU Might Be OK...)</tspan></text> - <!-- Text --> - <text - xml:space="preserve" - x="7200" - y="7875" - font-style="normal" - font-weight="normal" - font-size="324" - id="text30" - style="font-size:427.63009644px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;font-family:Nimbus Sans L;-inkscape-font-specification:Nimbus Sans L" - sodipodi:linespacing="125%">(1) Provide Existence Guarantees For Update-Friendly Mechanisms</text> - <!-- Text --> - <text - xml:space="preserve" - x="7200" - y="8325" - font-style="normal" - font-weight="normal" - font-size="324" - id="text32" - style="font-size:427.63009644px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;font-family:Nimbus Sans L;-inkscape-font-specification:Nimbus Sans L" - sodipodi:linespacing="125%">(2) Provide Wait-Free Read-Side Primitives for Real-Time Use)</text> - <!-- Text --> - <text - xml:space="preserve" - x="7200" - y="7425" - font-style="normal" - font-weight="normal" - font-size="324" - id="text34" - style="font-size:427.63009644px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;writing-mode:lr-tb;text-anchor:middle;fill:#000000;font-family:Nimbus Sans L;-inkscape-font-specification:Nimbus Sans L" - sodipodi:linespacing="125%">(RCU is Very Unlikely to be the Right Tool For The Job, But it Can:</text> - </g> -</svg> diff --git a/Documentation/RCU/Design/Requirements/Requirements.html b/Documentation/RCU/Design/Requirements/Requirements.html index a725f9900ec8..e7e24b3e86e2 100644 --- a/Documentation/RCU/Design/Requirements/Requirements.html +++ b/Documentation/RCU/Design/Requirements/Requirements.html @@ -1,5 +1,3 @@ -<!-- DO NOT HAND EDIT. --> -<!-- Instead, edit Documentation/RCU/Design/Requirements/Requirements.htmlx and run 'sh htmlqqz.sh Documentation/RCU/Design/Requirements/Requirements' --> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> <html> @@ -65,8 +63,8 @@ All that aside, here are the categories of currently known RCU requirements: <p> This is followed by a <a href="#Summary">summary</a>, -which is in turn followed by the inevitable -<a href="#Answers to Quick Quizzes">answers to the quick quizzes</a>. +however, the answers to each quick quiz immediately follows the quiz. +Select the big white space with your mouse to see the answer. <h2><a name="Fundamental Requirements">Fundamental Requirements</a></h2> @@ -153,13 +151,27 @@ Therefore, the outcome: </blockquote> cannot happen. -<p><a name="Quick Quiz 1"><b>Quick Quiz 1</b>:</a> -Wait a minute! -You said that updaters can make useful forward progress concurrently -with readers, but pre-existing readers will block -<tt>synchronize_rcu()</tt>!!! -Just who are you trying to fool??? -<br><a href="#qq1answer">Answer</a> +<table> +<tr><th> </th></tr> +<tr><th align="left">Quick Quiz:</th></tr> +<tr><td> + Wait a minute! + You said that updaters can make useful forward progress concurrently + with readers, but pre-existing readers will block + <tt>synchronize_rcu()</tt>!!! + Just who are you trying to fool??? +</td></tr> +<tr><th align="left">Answer:</th></tr> +<tr><td bgcolor="#ffffff"><font color="ffffff"> + First, if updaters do not wish to be blocked by readers, they can use + <tt>call_rcu()</tt> or <tt>kfree_rcu()</tt>, which will + be discussed later. + Second, even when using <tt>synchronize_rcu()</tt>, the other + update-side code does run concurrently with readers, whether + pre-existing or not. +</font></td></tr> +<tr><td> </td></tr> +</table> <p> This scenario resembles one of the first uses of RCU in @@ -210,9 +222,20 @@ to guarantee that <tt>do_something()</tt> never runs concurrently with <tt>recovery()</tt>, but with little or no synchronization overhead in <tt>do_something_dlm()</tt>. -<p><a name="Quick Quiz 2"><b>Quick Quiz 2</b>:</a> -Why is the <tt>synchronize_rcu()</tt> on line 28 needed? -<br><a href="#qq2answer">Answer</a> +<table> +<tr><th> </th></tr> +<tr><th align="left">Quick Quiz:</th></tr> +<tr><td> + Why is the <tt>synchronize_rcu()</tt> on line 28 needed? +</td></tr> +<tr><th align="left">Answer:</th></tr> +<tr><td bgcolor="#ffffff"><font color="ffffff"> + Without that extra grace period, memory reordering could result in + <tt>do_something_dlm()</tt> executing <tt>do_something()</tt> + concurrently with the last bits of <tt>recovery()</tt>. +</font></td></tr> +<tr><td> </td></tr> +</table> <p> In order to avoid fatal problems such as deadlocks, @@ -332,12 +355,27 @@ It also prevents any number of “interesting” compiler optimizations, for example, the use of <tt>gp</tt> as a scratch location immediately preceding the assignment. -<p><a name="Quick Quiz 3"><b>Quick Quiz 3</b>:</a> -But <tt>rcu_assign_pointer()</tt> does nothing to prevent the -two assignments to <tt>p->a</tt> and <tt>p->b</tt> -from being reordered. -Can't that also cause problems? -<br><a href="#qq3answer">Answer</a> +<table> +<tr><th> </th></tr> +<tr><th align="left">Quick Quiz:</th></tr> +<tr><td> + But <tt>rcu_assign_pointer()</tt> does nothing to prevent the + two assignments to <tt>p->a</tt> and <tt>p->b</tt> + from being reordered. + Can't that also cause problems? +</td></tr> +<tr><th align="left">Answer:</th></tr> +<tr><td bgcolor="#ffffff"><font color="ffffff"> + No, it cannot. + The readers cannot see either of these two fields until + the assignment to <tt>gp</tt>, by which time both fields are + fully initialized. + So reordering the assignments + to <tt>p->a</tt> and <tt>p->b</tt> cannot possibly + cause any problems. +</font></td></tr> +<tr><td> </td></tr> +</table> <p> It is tempting to assume that the reader need not do anything special @@ -494,11 +532,42 @@ The <tt>rcu_access_pointer()</tt> on line 6 is similar to code protected by the corresponding update-side lock. </ol> -<p><a name="Quick Quiz 4"><b>Quick Quiz 4</b>:</a> -Without the <tt>rcu_dereference()</tt> or the -<tt>rcu_access_pointer()</tt>, what destructive optimizations -might the compiler make use of? -<br><a href="#qq4answer">Answer</a> +<table> +<tr><th> </th></tr> +<tr><th align="left">Quick Quiz:</th></tr> +<tr><td> + Without the <tt>rcu_dereference()</tt> or the + <tt>rcu_access_pointer()</tt>, what destructive optimizations + might the compiler make use of? +</td></tr> +<tr><th align="left">Answer:</th></tr> +<tr><td bgcolor="#ffffff"><font color="ffffff"> + Let's start with what happens to <tt>do_something_gp()</tt> + if it fails to use <tt>rcu_dereference()</tt>. + It could reuse a value formerly fetched from this same pointer. + It could also fetch the pointer from <tt>gp</tt> in a byte-at-a-time + manner, resulting in <i>load tearing</i>, in turn resulting a bytewise + mash-up of two distince pointer values. + It might even use value-speculation optimizations, where it makes + a wrong guess, but by the time it gets around to checking the + value, an update has changed the pointer to match the wrong guess. + Too bad about any dereferences that returned pre-initialization garbage + in the meantime! + </font> + + <p><font color="ffffff"> + For <tt>remove_gp_synchronous()</tt>, as long as all modifications + to <tt>gp</tt> are carried out while holding <tt>gp_lock</tt>, + the above optimizations are harmless. + However, + with <tt>CONFIG_SPARSE_RCU_POINTER=y</tt>, + <tt>sparse</tt> will complain if you + define <tt>gp</tt> with <tt>__rcu</tt> and then + access it without using + either <tt>rcu_access_pointer()</tt> or <tt>rcu_dereference()</tt>. +</font></td></tr> +<tr><td> </td></tr> +</table> <p> In short, RCU's publish-subscribe guarantee is provided by the combination @@ -571,17 +640,156 @@ systems with more than one CPU: <tt>synchronize_rcu()</tt> migrates in the meantime. </ol> -<p><a name="Quick Quiz 5"><b>Quick Quiz 5</b>:</a> -Given that multiple CPUs can start RCU read-side critical sections -at any time without any ordering whatsoever, how can RCU possibly tell whether -or not a given RCU read-side critical section starts before a -given instance of <tt>synchronize_rcu()</tt>? -<br><a href="#qq5answer">Answer</a> - -<p><a name="Quick Quiz 6"><b>Quick Quiz 6</b>:</a> -The first and second guarantees require unbelievably strict ordering! -Are all these memory barriers <i> really</i> required? -<br><a href="#qq6answer">Answer</a> +<table> +<tr><th> </th></tr> +<tr><th align="left">Quick Quiz:</th></tr> +<tr><td> + Given that multiple CPUs can start RCU read-side critical sections + at any time without any ordering whatsoever, how can RCU possibly + tell whether or not a given RCU read-side critical section starts + before a given instance of <tt>synchronize_rcu()</tt>? +</td></tr> +<tr><th align="left">Answer:</th></tr> +<tr><td bgcolor="#ffffff"><font color="ffffff"> + If RCU cannot tell whether or not a given + RCU read-side critical section starts before a + given instance of <tt>synchronize_rcu()</tt>, + then it must assume that the RCU read-side critical section + started first. + In other words, a given instance of <tt>synchronize_rcu()</tt> + can avoid waiting on a given RCU read-side critical section only + if it can prove that <tt>synchronize_rcu()</tt> started first. +</font></td></tr> +<tr><td> </td></tr> +</table> + +<table> +<tr><th> </th></tr> +<tr><th align="left">Quick Quiz:</th></tr> +<tr><td> + The first and second guarantees require unbelievably strict ordering! + Are all these memory barriers <i> really</i> required? +</td></tr> +<tr><th align="left">Answer:</th></tr> +<tr><td bgcolor="#ffffff"><font color="ffffff"> + Yes, they really are required. + To see why the first guarantee is required, consider the following + sequence of events: + </font> + + <ol> + <li> <font color="ffffff"> + CPU 1: <tt>rcu_read_lock()</tt> + </font> + <li> <font color="ffffff"> + CPU 1: <tt>q = rcu_dereference(gp); + /* Very likely to return p. */</tt> + </font> + <li> <font color="ffffff"> + CPU 0: <tt>list_del_rcu(p);</tt> + </font> + <li> <font color="ffffff"> + CPU 0: <tt>synchronize_rcu()</tt> starts. + </font> + <li> <font color="ffffff"> + CPU 1: <tt>do_something_with(q->a); + /* No smp_mb(), so might happen after kfree(). */</tt> + </font> + <li> <font color="ffffff"> + CPU 1: <tt>rcu_read_unlock()</tt> + </font> + <li> <font color="ffffff"> + CPU 0: <tt>synchronize_rcu()</tt> returns. + </font> + <li> <font color="ffffff"> + CPU 0: <tt>kfree(p);</tt> + </font> + </ol> + + <p><font color="ffffff"> + Therefore, there absolutely must be a full memory barrier between the + end of the RCU read-side critical section and the end of the + grace period. + </font> + + <p><font color="ffffff"> + The sequence of events demonstrating the necessity of the second rule + is roughly similar: + </font> + + <ol> + <li> <font color="ffffff">CPU 0: <tt>list_del_rcu(p);</tt> + </font> + <li> <font color="ffffff">CPU 0: <tt>synchronize_rcu()</tt> starts. + </font> + <li> <font color="ffffff">CPU 1: <tt>rcu_read_lock()</tt> + </font> + <li> <font color="ffffff">CPU 1: <tt>q = rcu_dereference(gp); + /* Might return p if no memory barrier. */</tt> + </font> + <li> <font color="ffffff">CPU 0: <tt>synchronize_rcu()</tt> returns. + </font> + <li> <font color="ffffff">CPU 0: <tt>kfree(p);</tt> + </font> + <li> <font color="ffffff"> + CPU 1: <tt>do_something_with(q->a); /* Boom!!! */</tt> + </font> + <li> <font color="ffffff">CPU 1: <tt>rcu_read_unlock()</tt> + </font> + </ol> + + <p><font color="ffffff"> + And similarly, without a memory barrier between the beginning of the + grace period and the beginning of the RCU read-side critical section, + CPU 1 might end up accessing the freelist. + </font> + + <p><font color="ffffff"> + The “as if” rule of course applies, so that any + implementation that acts as if the appropriate memory barriers + were in place is a correct implementation. + That said, it is much easier to fool yourself into believing + that you have adhered to the as-if rule than it is to actually + adhere to it! +</font></td></tr> +<tr><td> </td></tr> +</table> + +<table> +<tr><th> </th></tr> +<tr><th align="left">Quick Quiz:</th></tr> +<tr><td> + You claim that <tt>rcu_read_lock()</tt> and <tt>rcu_read_unlock()</tt> + generate absolutely no code in some kernel builds. + This means that the compiler might arbitrarily rearrange consecutive + RCU read-side critical sections. + Given such rearrangement, if a given RCU read-side critical section + is done, how can you be sure that all prior RCU read-side critical + sections are done? + Won't the compiler rearrangements make that impossible to determine? +</td></tr> +<tr><th align="left">Answer:</th></tr> +<tr><td bgcolor="#ffffff"><font color="ffffff"> + In cases where <tt>rcu_read_lock()</tt> and <tt>rcu_read_unlock()</tt> + generate absolutely no code, RCU infers quiescent states only at + special locations, for example, within the scheduler. + Because calls to <tt>schedule()</tt> had better prevent calling-code + accesses to shared variables from being rearranged across the call to + <tt>schedule()</tt>, if RCU detects the end of a given RCU read-side + critical section, it will necessarily detect the end of all prior + RCU read-side critical sections, no matter how aggressively the + compiler scrambles the code. + </font> + + <p><font color="ffffff"> + Again, this all assumes that the compiler cannot scramble code across + calls to the scheduler, out of interrupt handlers, into the idle loop, + into user-mode code, and so on. + But if your kernel build allows that sort of scrambling, you have broken + far more than just RCU! +</font></td></tr> +<tr><td> </td></tr> +</table> <p> Note that these memory-barrier requirements do not replace the fundamental @@ -626,9 +834,19 @@ inconvenience can be avoided through use of the <tt>call_rcu()</tt> and <tt>kfree_rcu()</tt> API members described later in this document. -<p><a name="Quick Quiz 7"><b>Quick Quiz 7</b>:</a> -But how does the upgrade-to-write operation exclude other readers? -<br><a href="#qq7answer">Answer</a> +<table> +<tr><th> </th></tr> +<tr><th align="left">Quick Quiz:</th></tr> +<tr><td> + But how does the upgrade-to-write operation exclude other readers? +</td></tr> +<tr><th align="left">Answer:</th></tr> +<tr><td bgcolor="#ffffff"><font color="ffffff"> + It doesn't, just like normal RCU updates, which also do not exclude + RCU readers. +</font></td></tr> +<tr><td> </td></tr> +</table> <p> This guarantee allows lookup code to be shared between read-side @@ -714,9 +932,20 @@ to do significant reordering. This is by design: Any significant ordering constraints would slow down these fast-path APIs. -<p><a name="Quick Quiz 8"><b>Quick Quiz 8</b>:</a> -Can't the compiler also reorder this code? -<br><a href="#qq8answer">Answer</a> +<table> +<tr><th> </th></tr> +<tr><th align="left">Quick Quiz:</th></tr> +<tr><td> + Can't the compiler also reorder this code? +</td></tr> +<tr><th align="left">Answer:</th></tr> +<tr><td bgcolor="#ffffff"><font color="ffffff"> + No, the volatile casts in <tt>READ_ONCE()</tt> and + <tt>WRITE_ONCE()</tt> prevent the compiler from reordering in + this particular case. +</font></td></tr> +<tr><td> </td></tr> +</table> <h3><a name="Readers Do Not Exclude Updaters">Readers Do Not Exclude Updaters</a></h3> @@ -769,10 +998,28 @@ new readers can start immediately after <tt>synchronize_rcu()</tt> starts, and <tt>synchronize_rcu()</tt> is under no obligation to wait for these new readers. -<p><a name="Quick Quiz 9"><b>Quick Quiz 9</b>:</a> -Suppose that synchronize_rcu() did wait until all readers had completed. -Would the updater be able to rely on this? -<br><a href="#qq9answer">Answer</a> +<table> +<tr><th> </th></tr> +<tr><th align="left">Quick Quiz:</th></tr> +<tr><td> + Suppose that synchronize_rcu() did wait until <i>all</i> + readers had completed instead of waiting only on + pre-existing readers. + For how long would the updater be able to rely on there + being no readers? +</td></tr> +<tr><th align="left">Answer:</th></tr> +<tr><td bgcolor="#ffffff"><font color="ffffff"> + For no time at all. + Even if <tt>synchronize_rcu()</tt> were to wait until + all readers had completed, a new reader might start immediately after + <tt>synchronize_rcu()</tt> completed. + Therefore, the code following + <tt>synchronize_rcu()</tt> can <i>never</i> rely on there being + no readers. +</font></td></tr> +<tr><td> </td></tr> +</table> <h3><a name="Grace Periods Don't Partition Read-Side Critical Sections"> Grace Periods Don't Partition Read-Side Critical Sections</a></h3> @@ -969,11 +1216,24 @@ grace period. As a result, an RCU read-side critical section cannot partition a pair of RCU grace periods. -<p><a name="Quick Quiz 10"><b>Quick Quiz 10</b>:</a> -How long a sequence of grace periods, each separated by an RCU read-side -critical section, would be required to partition the RCU read-side -critical sections at the beginning and end of the chain? -<br><a href="#qq10answer">Answer</a> +<table> +<tr><th> </th></tr> +<tr><th align="left">Quick Quiz:</th></tr> +<tr><td> + How long a sequence of grace periods, each separated by an RCU + read-side critical section, would be required to partition the RCU + read-side critical sections at the beginning and end of the chain? +</td></tr> +<tr><th align="left">Answer:</th></tr> +<tr><td bgcolor="#ffffff"><font color="ffffff"> + In theory, an infinite number. + In practice, an unknown number that is sensitive to both implementation + details and timing considerations. + Therefore, even in practice, RCU users must abide by the + theoretical rather than the practical answer. +</font></td></tr> +<tr><td> </td></tr> +</table> <h3><a name="Disabling Preemption Does Not Block Grace Periods"> Disabling Preemption Does Not Block Grace Periods</a></h3> @@ -1109,12 +1369,27 @@ These classes is covered in the following sections. <h3><a name="Specialization">Specialization</a></h3> <p> -RCU is and always has been intended primarily for read-mostly situations, as -illustrated by the following figure. -This means that RCU's read-side primitives are optimized, often at the +RCU is and always has been intended primarily for read-mostly situations, +which means that RCU's read-side primitives are optimized, often at the expense of its update-side primitives. +Experience thus far is captured by the following list of situations: -<p><img src="RCUApplicability.svg" alt="RCUApplicability.svg" width="70%"></p> +<ol> +<li> Read-mostly data, where stale and inconsistent data is not + a problem: RCU works great! +<li> Read-mostly data, where data must be consistent: + RCU works well. +<li> Read-write data, where data must be consistent: + RCU <i>might</i> work OK. + Or not. +<li> Write-mostly data, where data must be consistent: + RCU is very unlikely to be the right tool for the job, + with the following exceptions, where RCU can provide: + <ol type=a> + <li> Existence guarantees for update-friendly mechanisms. + <li> Wait-free read-side primitives for real-time use. + </ol> +</ol> <p> This focus on read-mostly situations means that RCU must interoperate @@ -1127,9 +1402,43 @@ synchronization primitives be legal within RCU read-side critical sections, including spinlocks, sequence locks, atomic operations, reference counters, and memory barriers. -<p><a name="Quick Quiz 11"><b>Quick Quiz 11</b>:</a> -What about sleeping locks? -<br><a href="#qq11answer">Answer</a> +<table> +<tr><th> </th></tr> +<tr><th align="left">Quick Quiz:</th></tr> +<tr><td> + What about sleeping locks? +</td></tr> +<tr><th align="left">Answer:</th></tr> +<tr><td bgcolor="#ffffff"><font color="ffffff"> + These are forbidden within Linux-kernel RCU read-side critical + sections because it is not legal to place a quiescent state + (in this case, voluntary context switch) within an RCU read-side + critical section. + However, sleeping locks may be used within userspace RCU read-side + critical sections, and also within Linux-kernel sleepable RCU + <a href="#Sleepable RCU"><font color="ffffff">(SRCU)</font></a> + read-side critical sections. + In addition, the -rt patchset turns spinlocks into a + sleeping locks so that the corresponding critical sections + can be preempted, which also means that these sleeplockified + spinlocks (but not other sleeping locks!) may be acquire within + -rt-Linux-kernel RCU read-side critical sections. + </font> + + <p><font color="ffffff"> + Note that it <i>is</i> legal for a normal RCU read-side + critical section to conditionally acquire a sleeping locks + (as in <tt>mutex_trylock()</tt>), but only as long as it does + not loop indefinitely attempting to conditionally acquire that + sleeping locks. + The key point is that things like <tt>mutex_trylock()</tt> + either return with the mutex held, or return an error indication if + the mutex was not immediately available. + Either way, <tt>mutex_trylock()</tt> returns immediately without + sleeping. +</font></td></tr> +<tr><td> </td></tr> +</table> <p> It often comes as a surprise that many algorithms do not require a @@ -1160,10 +1469,7 @@ some period of time, so the exact wait period is a judgment call. One of our pair of veternarians might wait 30 seconds before pronouncing the cat dead, while the other might insist on waiting a full minute. The two veternarians would then disagree on the state of the cat during -the final 30 seconds of the minute following the last heartbeat, as -fancifully illustrated below: - -<p><img src="2013-08-is-it-dead.png" alt="2013-08-is-it-dead.png" width="431"></p> +the final 30 seconds of the minute following the last heartbeat. <p> Interestingly enough, this same situation applies to hardware. @@ -1343,7 +1649,8 @@ situations where neither <tt>synchronize_rcu()</tt> nor <tt>synchronize_rcu_expedited()</tt> would be legal, including within preempt-disable code, <tt>local_bh_disable()</tt> code, interrupt-disable code, and interrupt handlers. -However, even <tt>call_rcu()</tt> is illegal within NMI handlers. +However, even <tt>call_rcu()</tt> is illegal within NMI handlers +and from idle and offline CPUs. The callback function (<tt>remove_gp_cb()</tt> in this case) will be executed within softirq (software interrupt) environment within the Linux kernel, @@ -1354,12 +1661,27 @@ write an RCU callback function that takes too long. Long-running operations should be relegated to separate threads or (in the Linux kernel) workqueues. -<p><a name="Quick Quiz 12"><b>Quick Quiz 12</b>:</a> -Why does line 19 use <tt>rcu_access_pointer()</tt>? -After all, <tt>call_rcu()</tt> on line 25 stores into the -structure, which would interact badly with concurrent insertions. -Doesn't this mean that <tt>rcu_dereference()</tt> is required? -<br><a href="#qq12answer">Answer</a> +<table> +<tr><th> </th></tr> +<tr><th align="left">Quick Quiz:</th></tr> +<tr><td> + Why does line 19 use <tt>rcu_access_pointer()</tt>? + After all, <tt>call_rcu()</tt> on line 25 stores into the + structure, which would interact badly with concurrent insertions. + Doesn't this mean that <tt>rcu_dereference()</tt> is required? +</td></tr> +<tr><th align="left">Answer:</th></tr> +<tr><td bgcolor="#ffffff"><font color="ffffff"> + Presumably the <tt>->gp_lock</tt> acquired on line 18 excludes + any changes, including any insertions that <tt>rcu_dereference()</tt> + would protect against. + Therefore, any insertions will be delayed until after + <tt>->gp_lock</tt> + is released on line 25, which in turn means that + <tt>rcu_access_pointer()</tt> suffices. +</font></td></tr> +<tr><td> </td></tr> +</table> <p> However, all that <tt>remove_gp_cb()</tt> is doing is @@ -1406,14 +1728,31 @@ This was due to the fact that RCU was not heavily used within DYNIX/ptx, so the very few places that needed something like <tt>synchronize_rcu()</tt> simply open-coded it. -<p><a name="Quick Quiz 13"><b>Quick Quiz 13</b>:</a> -Earlier it was claimed that <tt>call_rcu()</tt> and -<tt>kfree_rcu()</tt> allowed updaters to avoid being blocked -by readers. -But how can that be correct, given that the invocation of the callback -and the freeing of the memory (respectively) must still wait for -a grace period to elapse? -<br><a href="#qq13answer">Answer</a> +<table> +<tr><th> </th></tr> +<tr><th align="left">Quick Quiz:</th></tr> +<tr><td> + Earlier it was claimed that <tt>call_rcu()</tt> and + <tt>kfree_rcu()</tt> allowed updaters to avoid being blocked + by readers. + But how can that be correct, given that the invocation of the callback + and the freeing of the memory (respectively) must still wait for + a grace period to elapse? +</td></tr> +<tr><th align="left">Answer:</th></tr> +<tr><td bgcolor="#ffffff"><font color="ffffff"> + We could define things this way, but keep in mind that this sort of + definition would say that updates in garbage-collected languages + cannot complete until the next time the garbage collector runs, + which does not seem at all reasonable. + The key point is that in most cases, an updater using either + <tt>call_rcu()</tt> or <tt>kfree_rcu()</tt> can proceed to the + next update as soon as it has invoked <tt>call_rcu()</tt> or + <tt>kfree_rcu()</tt>, without having to wait for a subsequent + grace period. +</font></td></tr> +<tr><td> </td></tr> +</table> <p> But what if the updater must wait for the completion of code to be @@ -1838,11 +2177,26 @@ kthreads to be spawned. Therefore, invoking <tt>synchronize_rcu()</tt> during scheduler initialization can result in deadlock. -<p><a name="Quick Quiz 14"><b>Quick Quiz 14</b>:</a> -So what happens with <tt>synchronize_rcu()</tt> during -scheduler initialization for <tt>CONFIG_PREEMPT=n</tt> -kernels? -<br><a href="#qq14answer">Answer</a> +<table> +<tr><th> </th></tr> +<tr><th align="left">Quick Quiz:</th></tr> +<tr><td> + So what happens with <tt>synchronize_rcu()</tt> during + scheduler initialization for <tt>CONFIG_PREEMPT=n</tt> + kernels? +</td></tr> +<tr><th align="left">Answer:</th></tr> +<tr><td bgcolor="#ffffff"><font color="ffffff"> + In <tt>CONFIG_PREEMPT=n</tt> kernel, <tt>synchronize_rcu()</tt> + maps directly to <tt>synchronize_sched()</tt>. + Therefore, <tt>synchronize_rcu()</tt> works normally throughout + boot in <tt>CONFIG_PREEMPT=n</tt> kernels. + However, your code must also work in <tt>CONFIG_PREEMPT=y</tt> kernels, + so it is still necessary to avoid invoking <tt>synchronize_rcu()</tt> + during scheduler initialization. +</font></td></tr> +<tr><td> </td></tr> +</table> <p> I learned of these boot-time requirements as a result of a series of @@ -2171,6 +2525,14 @@ This real-time requirement motivated the grace-period kthread, which also simplified handling of a number of race conditions. <p> +RCU must avoid degrading real-time response for CPU-bound threads, whether +executing in usermode (which is one use case for +<tt>CONFIG_NO_HZ_FULL=y</tt>) or in the kernel. +That said, CPU-bound loops in the kernel must execute +<tt>cond_resched_rcu_qs()</tt> at least once per few tens of milliseconds +in order to avoid receiving an IPI from RCU. + +<p> Finally, RCU's status as a synchronization primitive means that any RCU failure can result in arbitrary memory corruption that can be extremely difficult to debug. @@ -2223,6 +2585,8 @@ described in a separate section. <li> <a href="#Sched Flavor">Sched Flavor</a> <li> <a href="#Sleepable RCU">Sleepable RCU</a> <li> <a href="#Tasks RCU">Tasks RCU</a> +<li> <a href="#Waiting for Multiple Grace Periods"> + Waiting for Multiple Grace Periods</a> </ol> <h3><a name="Bottom-Half Flavor">Bottom-Half Flavor</a></h3> @@ -2472,6 +2836,94 @@ The tasks-RCU API is quite compact, consisting only of <tt>synchronize_rcu_tasks()</tt>, and <tt>rcu_barrier_tasks()</tt>. +<h3><a name="Waiting for Multiple Grace Periods"> +Waiting for Multiple Grace Periods</a></h3> + +<p> +Perhaps you have an RCU protected data structure that is accessed from +RCU read-side critical sections, from softirq handlers, and from +hardware interrupt handlers. +That is three flavors of RCU, the normal flavor, the bottom-half flavor, +and the sched flavor. +How to wait for a compound grace period? + +<p> +The best approach is usually to “just say no!” and +insert <tt>rcu_read_lock()</tt> and <tt>rcu_read_unlock()</tt> +around each RCU read-side critical section, regardless of what +environment it happens to be in. +But suppose that some of the RCU read-side critical sections are +on extremely hot code paths, and that use of <tt>CONFIG_PREEMPT=n</tt> +is not a viable option, so that <tt>rcu_read_lock()</tt> and +<tt>rcu_read_unlock()</tt> are not free. +What then? + +<p> +You <i>could</i> wait on all three grace periods in succession, as follows: + +<blockquote> +<pre> + 1 synchronize_rcu(); + 2 synchronize_rcu_bh(); + 3 synchronize_sched(); +</pre> +</blockquote> + +<p> +This works, but triples the update-side latency penalty. +In cases where this is not acceptable, <tt>synchronize_rcu_mult()</tt> +may be used to wait on all three flavors of grace period concurrently: + +<blockquote> +<pre> + 1 synchronize_rcu_mult(call_rcu, call_rcu_bh, call_rcu_sched); +</pre> +</blockquote> + +<p> +But what if it is necessary to also wait on SRCU? +This can be done as follows: + +<blockquote> +<pre> + 1 static void call_my_srcu(struct rcu_head *head, + 2 void (*func)(struct rcu_head *head)) + 3 { + 4 call_srcu(&my_srcu, head, func); + 5 } + 6 + 7 synchronize_rcu_mult(call_rcu, call_rcu_bh, call_rcu_sched, call_my_srcu); +</pre> +</blockquote> + +<p> +If you needed to wait on multiple different flavors of SRCU +(but why???), you would need to create a wrapper function resembling +<tt>call_my_srcu()</tt> for each SRCU flavor. + +<table> +<tr><th> </th></tr> +<tr><th align="left">Quick Quiz:</th></tr> +<tr><td> + But what if I need to wait for multiple RCU flavors, but I also need + the grace periods to be expedited? +</td></tr> +<tr><th align="left">Answer:</th></tr> +<tr><td bgcolor="#ffffff"><font color="ffffff"> + If you are using expedited grace periods, there should be less penalty + for waiting on them in succession. + But if that is nevertheless a problem, you can use workqueues + or multiple kthreads to wait on the various expedited grace + periods concurrently. +</font></td></tr> +<tr><td> </td></tr> +</table> + +<p> +Again, it is usually better to adjust the RCU read-side critical sections +to use a single flavor of RCU, but when this is not feasible, you can use +<tt>synchronize_rcu_mult()</tt>. + <h2><a name="Possible Future Changes">Possible Future Changes</a></h2> <p> @@ -2569,329 +3021,4 @@ and is provided under the terms of the Creative Commons Attribution-Share Alike 3.0 United States license. -<h3><a name="Answers to Quick Quizzes"> -Answers to Quick Quizzes</a></h3> - -<a name="qq1answer"></a> -<p><b>Quick Quiz 1</b>: -Wait a minute! -You said that updaters can make useful forward progress concurrently -with readers, but pre-existing readers will block -<tt>synchronize_rcu()</tt>!!! -Just who are you trying to fool??? - - -</p><p><b>Answer</b>: -First, if updaters do not wish to be blocked by readers, they can use -<tt>call_rcu()</tt> or <tt>kfree_rcu()</tt>, which will -be discussed later. -Second, even when using <tt>synchronize_rcu()</tt>, the other -update-side code does run concurrently with readers, whether pre-existing -or not. - - -</p><p><a href="#Quick%20Quiz%201"><b>Back to Quick Quiz 1</b>.</a> - -<a name="qq2answer"></a> -<p><b>Quick Quiz 2</b>: -Why is the <tt>synchronize_rcu()</tt> on line 28 needed? - - -</p><p><b>Answer</b>: -Without that extra grace period, memory reordering could result in -<tt>do_something_dlm()</tt> executing <tt>do_something()</tt> -concurrently with the last bits of <tt>recovery()</tt>. - - -</p><p><a href="#Quick%20Quiz%202"><b>Back to Quick Quiz 2</b>.</a> - -<a name="qq3answer"></a> -<p><b>Quick Quiz 3</b>: -But <tt>rcu_assign_pointer()</tt> does nothing to prevent the -two assignments to <tt>p->a</tt> and <tt>p->b</tt> -from being reordered. -Can't that also cause problems? - - -</p><p><b>Answer</b>: -No, it cannot. -The readers cannot see either of these two fields until -the assignment to <tt>gp</tt>, by which time both fields are -fully initialized. -So reordering the assignments -to <tt>p->a</tt> and <tt>p->b</tt> cannot possibly -cause any problems. - - -</p><p><a href="#Quick%20Quiz%203"><b>Back to Quick Quiz 3</b>.</a> - -<a name="qq4answer"></a> -<p><b>Quick Quiz 4</b>: -Without the <tt>rcu_dereference()</tt> or the -<tt>rcu_access_pointer()</tt>, what destructive optimizations -might the compiler make use of? - - -</p><p><b>Answer</b>: -Let's start with what happens to <tt>do_something_gp()</tt> -if it fails to use <tt>rcu_dereference()</tt>. -It could reuse a value formerly fetched from this same pointer. -It could also fetch the pointer from <tt>gp</tt> in a byte-at-a-time -manner, resulting in <i>load tearing</i>, in turn resulting a bytewise -mash-up of two distince pointer values. -It might even use value-speculation optimizations, where it makes a wrong -guess, but by the time it gets around to checking the value, an update -has changed the pointer to match the wrong guess. -Too bad about any dereferences that returned pre-initialization garbage -in the meantime! - -<p> -For <tt>remove_gp_synchronous()</tt>, as long as all modifications -to <tt>gp</tt> are carried out while holding <tt>gp_lock</tt>, -the above optimizations are harmless. -However, -with <tt>CONFIG_SPARSE_RCU_POINTER=y</tt>, -<tt>sparse</tt> will complain if you -define <tt>gp</tt> with <tt>__rcu</tt> and then -access it without using -either <tt>rcu_access_pointer()</tt> or <tt>rcu_dereference()</tt>. - - -</p><p><a href="#Quick%20Quiz%204"><b>Back to Quick Quiz 4</b>.</a> - -<a name="qq5answer"></a> -<p><b>Quick Quiz 5</b>: -Given that multiple CPUs can start RCU read-side critical sections -at any time without any ordering whatsoever, how can RCU possibly tell whether -or not a given RCU read-side critical section starts before a -given instance of <tt>synchronize_rcu()</tt>? - - -</p><p><b>Answer</b>: -If RCU cannot tell whether or not a given -RCU read-side critical section starts before a -given instance of <tt>synchronize_rcu()</tt>, -then it must assume that the RCU read-side critical section -started first. -In other words, a given instance of <tt>synchronize_rcu()</tt> -can avoid waiting on a given RCU read-side critical section only -if it can prove that <tt>synchronize_rcu()</tt> started first. - - -</p><p><a href="#Quick%20Quiz%205"><b>Back to Quick Quiz 5</b>.</a> - -<a name="qq6answer"></a> -<p><b>Quick Quiz 6</b>: -The first and second guarantees require unbelievably strict ordering! -Are all these memory barriers <i> really</i> required? - - -</p><p><b>Answer</b>: -Yes, they really are required. -To see why the first guarantee is required, consider the following -sequence of events: - -<ol> -<li> CPU 1: <tt>rcu_read_lock()</tt> -<li> CPU 1: <tt>q = rcu_dereference(gp); - /* Very likely to return p. */</tt> -<li> CPU 0: <tt>list_del_rcu(p);</tt> -<li> CPU 0: <tt>synchronize_rcu()</tt> starts. -<li> CPU 1: <tt>do_something_with(q->a); - /* No smp_mb(), so might happen after kfree(). */</tt> -<li> CPU 1: <tt>rcu_read_unlock()</tt> -<li> CPU 0: <tt>synchronize_rcu()</tt> returns. -<li> CPU 0: <tt>kfree(p);</tt> -</ol> - -<p> -Therefore, there absolutely must be a full memory barrier between the -end of the RCU read-side critical section and the end of the -grace period. - -<p> -The sequence of events demonstrating the necessity of the second rule -is roughly similar: - -<ol> -<li> CPU 0: <tt>list_del_rcu(p);</tt> -<li> CPU 0: <tt>synchronize_rcu()</tt> starts. -<li> CPU 1: <tt>rcu_read_lock()</tt> -<li> CPU 1: <tt>q = rcu_dereference(gp); - /* Might return p if no memory barrier. */</tt> -<li> CPU 0: <tt>synchronize_rcu()</tt> returns. -<li> CPU 0: <tt>kfree(p);</tt> -<li> CPU 1: <tt>do_something_with(q->a); /* Boom!!! */</tt> -<li> CPU 1: <tt>rcu_read_unlock()</tt> -</ol> - -<p> -And similarly, without a memory barrier between the beginning of the -grace period and the beginning of the RCU read-side critical section, -CPU 1 might end up accessing the freelist. - -<p> -The “as if” rule of course applies, so that any implementation -that acts as if the appropriate memory barriers were in place is a -correct implementation. -That said, it is much easier to fool yourself into believing that you have -adhered to the as-if rule than it is to actually adhere to it! - - -</p><p><a href="#Quick%20Quiz%206"><b>Back to Quick Quiz 6</b>.</a> - -<a name="qq7answer"></a> -<p><b>Quick Quiz 7</b>: -But how does the upgrade-to-write operation exclude other readers? - - -</p><p><b>Answer</b>: -It doesn't, just like normal RCU updates, which also do not exclude -RCU readers. - - -</p><p><a href="#Quick%20Quiz%207"><b>Back to Quick Quiz 7</b>.</a> - -<a name="qq8answer"></a> -<p><b>Quick Quiz 8</b>: -Can't the compiler also reorder this code? - - -</p><p><b>Answer</b>: -No, the volatile casts in <tt>READ_ONCE()</tt> and -<tt>WRITE_ONCE()</tt> prevent the compiler from reordering in -this particular case. - - -</p><p><a href="#Quick%20Quiz%208"><b>Back to Quick Quiz 8</b>.</a> - -<a name="qq9answer"></a> -<p><b>Quick Quiz 9</b>: -Suppose that synchronize_rcu() did wait until all readers had completed. -Would the updater be able to rely on this? - - -</p><p><b>Answer</b>: -No. -Even if <tt>synchronize_rcu()</tt> were to wait until -all readers had completed, a new reader might start immediately after -<tt>synchronize_rcu()</tt> completed. -Therefore, the code following -<tt>synchronize_rcu()</tt> cannot rely on there being no readers -in any case. - - -</p><p><a href="#Quick%20Quiz%209"><b>Back to Quick Quiz 9</b>.</a> - -<a name="qq10answer"></a> -<p><b>Quick Quiz 10</b>: -How long a sequence of grace periods, each separated by an RCU read-side -critical section, would be required to partition the RCU read-side -critical sections at the beginning and end of the chain? - - -</p><p><b>Answer</b>: -In theory, an infinite number. -In practice, an unknown number that is sensitive to both implementation -details and timing considerations. -Therefore, even in practice, RCU users must abide by the theoretical rather -than the practical answer. - - -</p><p><a href="#Quick%20Quiz%2010"><b>Back to Quick Quiz 10</b>.</a> - -<a name="qq11answer"></a> -<p><b>Quick Quiz 11</b>: -What about sleeping locks? - - -</p><p><b>Answer</b>: -These are forbidden within Linux-kernel RCU read-side critical sections -because it is not legal to place a quiescent state (in this case, -voluntary context switch) within an RCU read-side critical section. -However, sleeping locks may be used within userspace RCU read-side critical -sections, and also within Linux-kernel sleepable RCU -<a href="#Sleepable RCU">(SRCU)</a> -read-side critical sections. -In addition, the -rt patchset turns spinlocks into a sleeping locks so -that the corresponding critical sections can be preempted, which -also means that these sleeplockified spinlocks (but not other sleeping locks!) -may be acquire within -rt-Linux-kernel RCU read-side critical sections. - -<p> -Note that it <i>is</i> legal for a normal RCU read-side critical section -to conditionally acquire a sleeping locks (as in <tt>mutex_trylock()</tt>), -but only as long as it does not loop indefinitely attempting to -conditionally acquire that sleeping locks. -The key point is that things like <tt>mutex_trylock()</tt> -either return with the mutex held, or return an error indication if -the mutex was not immediately available. -Either way, <tt>mutex_trylock()</tt> returns immediately without sleeping. - - -</p><p><a href="#Quick%20Quiz%2011"><b>Back to Quick Quiz 11</b>.</a> - -<a name="qq12answer"></a> -<p><b>Quick Quiz 12</b>: -Why does line 19 use <tt>rcu_access_pointer()</tt>? -After all, <tt>call_rcu()</tt> on line 25 stores into the -structure, which would interact badly with concurrent insertions. -Doesn't this mean that <tt>rcu_dereference()</tt> is required? - - -</p><p><b>Answer</b>: -Presumably the <tt>->gp_lock</tt> acquired on line 18 excludes -any changes, including any insertions that <tt>rcu_dereference()</tt> -would protect against. -Therefore, any insertions will be delayed until after <tt>->gp_lock</tt> -is released on line 25, which in turn means that -<tt>rcu_access_pointer()</tt> suffices. - - -</p><p><a href="#Quick%20Quiz%2012"><b>Back to Quick Quiz 12</b>.</a> - -<a name="qq13answer"></a> -<p><b>Quick Quiz 13</b>: -Earlier it was claimed that <tt>call_rcu()</tt> and -<tt>kfree_rcu()</tt> allowed updaters to avoid being blocked -by readers. -But how can that be correct, given that the invocation of the callback -and the freeing of the memory (respectively) must still wait for -a grace period to elapse? - - -</p><p><b>Answer</b>: -We could define things this way, but keep in mind that this sort of -definition would say that updates in garbage-collected languages -cannot complete until the next time the garbage collector runs, -which does not seem at all reasonable. -The key point is that in most cases, an updater using either -<tt>call_rcu()</tt> or <tt>kfree_rcu()</tt> can proceed to the -next update as soon as it has invoked <tt>call_rcu()</tt> or -<tt>kfree_rcu()</tt>, without having to wait for a subsequent -grace period. - - -</p><p><a href="#Quick%20Quiz%2013"><b>Back to Quick Quiz 13</b>.</a> - -<a name="qq14answer"></a> -<p><b>Quick Quiz 14</b>: -So what happens with <tt>synchronize_rcu()</tt> during -scheduler initialization for <tt>CONFIG_PREEMPT=n</tt> -kernels? - - -</p><p><b>Answer</b>: -In <tt>CONFIG_PREEMPT=n</tt> kernel, <tt>synchronize_rcu()</tt> -maps directly to <tt>synchronize_sched()</tt>. -Therefore, <tt>synchronize_rcu()</tt> works normally throughout -boot in <tt>CONFIG_PREEMPT=n</tt> kernels. -However, your code must also work in <tt>CONFIG_PREEMPT=y</tt> kernels, -so it is still necessary to avoid invoking <tt>synchronize_rcu()</tt> -during scheduler initialization. - - -</p><p><a href="#Quick%20Quiz%2014"><b>Back to Quick Quiz 14</b>.</a> - - </body></html> diff --git a/Documentation/RCU/Design/Requirements/Requirements.htmlx b/Documentation/RCU/Design/Requirements/Requirements.htmlx deleted file mode 100644 index 3a97ba490c42..000000000000 --- a/Documentation/RCU/Design/Requirements/Requirements.htmlx +++ /dev/null @@ -1,2741 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" - "http://www.w3.org/TR/html4/loose.dtd"> - <html> - <head><title>A Tour Through RCU's Requirements [LWN.net]</title> - <meta HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=utf-8"> - -<h1>A Tour Through RCU's Requirements</h1> - -<p>Copyright IBM Corporation, 2015</p> -<p>Author: Paul E. McKenney</p> -<p><i>The initial version of this document appeared in the -<a href="https://lwn.net/">LWN</a> articles -<a href="https://lwn.net/Articles/652156/">here</a>, -<a href="https://lwn.net/Articles/652677/">here</a>, and -<a href="https://lwn.net/Articles/653326/">here</a>.</i></p> - -<h2>Introduction</h2> - -<p> -Read-copy update (RCU) is a synchronization mechanism that is often -used as a replacement for reader-writer locking. -RCU is unusual in that updaters do not block readers, -which means that RCU's read-side primitives can be exceedingly fast -and scalable. -In addition, updaters can make useful forward progress concurrently -with readers. -However, all this concurrency between RCU readers and updaters does raise -the question of exactly what RCU readers are doing, which in turn -raises the question of exactly what RCU's requirements are. - -<p> -This document therefore summarizes RCU's requirements, and can be thought -of as an informal, high-level specification for RCU. -It is important to understand that RCU's specification is primarily -empirical in nature; -in fact, I learned about many of these requirements the hard way. -This situation might cause some consternation, however, not only -has this learning process been a lot of fun, but it has also been -a great privilege to work with so many people willing to apply -technologies in interesting new ways. - -<p> -All that aside, here are the categories of currently known RCU requirements: -</p> - -<ol> -<li> <a href="#Fundamental Requirements"> - Fundamental Requirements</a> -<li> <a href="#Fundamental Non-Requirements">Fundamental Non-Requirements</a> -<li> <a href="#Parallelism Facts of Life"> - Parallelism Facts of Life</a> -<li> <a href="#Quality-of-Implementation Requirements"> - Quality-of-Implementation Requirements</a> -<li> <a href="#Linux Kernel Complications"> - Linux Kernel Complications</a> -<li> <a href="#Software-Engineering Requirements"> - Software-Engineering Requirements</a> -<li> <a href="#Other RCU Flavors"> - Other RCU Flavors</a> -<li> <a href="#Possible Future Changes"> - Possible Future Changes</a> -</ol> - -<p> -This is followed by a <a href="#Summary">summary</a>, -which is in turn followed by the inevitable -<a href="#Answers to Quick Quizzes">answers to the quick quizzes</a>. - -<h2><a name="Fundamental Requirements">Fundamental Requirements</a></h2> - -<p> -RCU's fundamental requirements are the closest thing RCU has to hard -mathematical requirements. -These are: - -<ol> -<li> <a href="#Grace-Period Guarantee"> - Grace-Period Guarantee</a> -<li> <a href="#Publish-Subscribe Guarantee"> - Publish-Subscribe Guarantee</a> -<li> <a href="#Memory-Barrier Guarantees"> - Memory-Barrier Guarantees</a> -<li> <a href="#RCU Primitives Guaranteed to Execute Unconditionally"> - RCU Primitives Guaranteed to Execute Unconditionally</a> -<li> <a href="#Guaranteed Read-to-Write Upgrade"> - Guaranteed Read-to-Write Upgrade</a> -</ol> - -<h3><a name="Grace-Period Guarantee">Grace-Period Guarantee</a></h3> - -<p> -RCU's grace-period guarantee is unusual in being premeditated: -Jack Slingwine and I had this guarantee firmly in mind when we started -work on RCU (then called “rclock”) in the early 1990s. -That said, the past two decades of experience with RCU have produced -a much more detailed understanding of this guarantee. - -<p> -RCU's grace-period guarantee allows updaters to wait for the completion -of all pre-existing RCU read-side critical sections. -An RCU read-side critical section -begins with the marker <tt>rcu_read_lock()</tt> and ends with -the marker <tt>rcu_read_unlock()</tt>. -These markers may be nested, and RCU treats a nested set as one -big RCU read-side critical section. -Production-quality implementations of <tt>rcu_read_lock()</tt> and -<tt>rcu_read_unlock()</tt> are extremely lightweight, and in -fact have exactly zero overhead in Linux kernels built for production -use with <tt>CONFIG_PREEMPT=n</tt>. - -<p> -This guarantee allows ordering to be enforced with extremely low -overhead to readers, for example: - -<blockquote> -<pre> - 1 int x, y; - 2 - 3 void thread0(void) - 4 { - 5 rcu_read_lock(); - 6 r1 = READ_ONCE(x); - 7 r2 = READ_ONCE(y); - 8 rcu_read_unlock(); - 9 } -10 -11 void thread1(void) -12 { -13 WRITE_ONCE(x, 1); -14 synchronize_rcu(); -15 WRITE_ONCE(y, 1); -16 } -</pre> -</blockquote> - -<p> -Because the <tt>synchronize_rcu()</tt> on line 14 waits for -all pre-existing readers, any instance of <tt>thread0()</tt> that -loads a value of zero from <tt>x</tt> must complete before -<tt>thread1()</tt> stores to <tt>y</tt>, so that instance must -also load a value of zero from <tt>y</tt>. -Similarly, any instance of <tt>thread0()</tt> that loads a value of -one from <tt>y</tt> must have started after the -<tt>synchronize_rcu()</tt> started, and must therefore also load -a value of one from <tt>x</tt>. -Therefore, the outcome: -<blockquote> -<pre> -(r1 == 0 && r2 == 1) -</pre> -</blockquote> -cannot happen. - -<p>@@QQ@@ -Wait a minute! -You said that updaters can make useful forward progress concurrently -with readers, but pre-existing readers will block -<tt>synchronize_rcu()</tt>!!! -Just who are you trying to fool??? -<p>@@QQA@@ -First, if updaters do not wish to be blocked by readers, they can use -<tt>call_rcu()</tt> or <tt>kfree_rcu()</tt>, which will -be discussed later. -Second, even when using <tt>synchronize_rcu()</tt>, the other -update-side code does run concurrently with readers, whether pre-existing -or not. -<p>@@QQE@@ - -<p> -This scenario resembles one of the first uses of RCU in -<a href="https://en.wikipedia.org/wiki/DYNIX">DYNIX/ptx</a>, -which managed a distributed lock manager's transition into -a state suitable for handling recovery from node failure, -more or less as follows: - -<blockquote> -<pre> - 1 #define STATE_NORMAL 0 - 2 #define STATE_WANT_RECOVERY 1 - 3 #define STATE_RECOVERING 2 - 4 #define STATE_WANT_NORMAL 3 - 5 - 6 int state = STATE_NORMAL; - 7 - 8 void do_something_dlm(void) - 9 { -10 int state_snap; -11 -12 rcu_read_lock(); -13 state_snap = READ_ONCE(state); -14 if (state_snap == STATE_NORMAL) -15 do_something(); -16 else -17 do_something_carefully(); -18 rcu_read_unlock(); -19 } -20 -21 void start_recovery(void) -22 { -23 WRITE_ONCE(state, STATE_WANT_RECOVERY); -24 synchronize_rcu(); -25 WRITE_ONCE(state, STATE_RECOVERING); -26 recovery(); -27 WRITE_ONCE(state, STATE_WANT_NORMAL); -28 synchronize_rcu(); -29 WRITE_ONCE(state, STATE_NORMAL); -30 } -</pre> -</blockquote> - -<p> -The RCU read-side critical section in <tt>do_something_dlm()</tt> -works with the <tt>synchronize_rcu()</tt> in <tt>start_recovery()</tt> -to guarantee that <tt>do_something()</tt> never runs concurrently -with <tt>recovery()</tt>, but with little or no synchronization -overhead in <tt>do_something_dlm()</tt>. - -<p>@@QQ@@ -Why is the <tt>synchronize_rcu()</tt> on line 28 needed? -<p>@@QQA@@ -Without that extra grace period, memory reordering could result in -<tt>do_something_dlm()</tt> executing <tt>do_something()</tt> -concurrently with the last bits of <tt>recovery()</tt>. -<p>@@QQE@@ - -<p> -In order to avoid fatal problems such as deadlocks, -an RCU read-side critical section must not contain calls to -<tt>synchronize_rcu()</tt>. -Similarly, an RCU read-side critical section must not -contain anything that waits, directly or indirectly, on completion of -an invocation of <tt>synchronize_rcu()</tt>. - -<p> -Although RCU's grace-period guarantee is useful in and of itself, with -<a href="https://lwn.net/Articles/573497/">quite a few use cases</a>, -it would be good to be able to use RCU to coordinate read-side -access to linked data structures. -For this, the grace-period guarantee is not sufficient, as can -be seen in function <tt>add_gp_buggy()</tt> below. -We will look at the reader's code later, but in the meantime, just think of -the reader as locklessly picking up the <tt>gp</tt> pointer, -and, if the value loaded is non-<tt>NULL</tt>, locklessly accessing the -<tt>->a</tt> and <tt>->b</tt> fields. - -<blockquote> -<pre> - 1 bool add_gp_buggy(int a, int b) - 2 { - 3 p = kmalloc(sizeof(*p), GFP_KERNEL); - 4 if (!p) - 5 return -ENOMEM; - 6 spin_lock(&gp_lock); - 7 if (rcu_access_pointer(gp)) { - 8 spin_unlock(&gp_lock); - 9 return false; -10 } -11 p->a = a; -12 p->b = a; -13 gp = p; /* ORDERING BUG */ -14 spin_unlock(&gp_lock); -15 return true; -16 } -</pre> -</blockquote> - -<p> -The problem is that both the compiler and weakly ordered CPUs are within -their rights to reorder this code as follows: - -<blockquote> -<pre> - 1 bool add_gp_buggy_optimized(int a, int b) - 2 { - 3 p = kmalloc(sizeof(*p), GFP_KERNEL); - 4 if (!p) - 5 return -ENOMEM; - 6 spin_lock(&gp_lock); - 7 if (rcu_access_pointer(gp)) { - 8 spin_unlock(&gp_lock); - 9 return false; -10 } -<b>11 gp = p; /* ORDERING BUG */ -12 p->a = a; -13 p->b = a;</b> -14 spin_unlock(&gp_lock); -15 return true; -16 } -</pre> -</blockquote> - -<p> -If an RCU reader fetches <tt>gp</tt> just after -<tt>add_gp_buggy_optimized</tt> executes line 11, -it will see garbage in the <tt>->a</tt> and <tt>->b</tt> -fields. -And this is but one of many ways in which compiler and hardware optimizations -could cause trouble. -Therefore, we clearly need some way to prevent the compiler and the CPU from -reordering in this manner, which brings us to the publish-subscribe -guarantee discussed in the next section. - -<h3><a name="Publish-Subscribe Guarantee">Publish/Subscribe Guarantee</a></h3> - -<p> -RCU's publish-subscribe guarantee allows data to be inserted -into a linked data structure without disrupting RCU readers. -The updater uses <tt>rcu_assign_pointer()</tt> to insert the -new data, and readers use <tt>rcu_dereference()</tt> to -access data, whether new or old. -The following shows an example of insertion: - -<blockquote> -<pre> - 1 bool add_gp(int a, int b) - 2 { - 3 p = kmalloc(sizeof(*p), GFP_KERNEL); - 4 if (!p) - 5 return -ENOMEM; - 6 spin_lock(&gp_lock); - 7 if (rcu_access_pointer(gp)) { - 8 spin_unlock(&gp_lock); - 9 return false; -10 } -11 p->a = a; -12 p->b = a; -13 rcu_assign_pointer(gp, p); -14 spin_unlock(&gp_lock); -15 return true; -16 } -</pre> -</blockquote> - -<p> -The <tt>rcu_assign_pointer()</tt> on line 13 is conceptually -equivalent to a simple assignment statement, but also guarantees -that its assignment will -happen after the two assignments in lines 11 and 12, -similar to the C11 <tt>memory_order_release</tt> store operation. -It also prevents any number of “interesting” compiler -optimizations, for example, the use of <tt>gp</tt> as a scratch -location immediately preceding the assignment. - -<p>@@QQ@@ -But <tt>rcu_assign_pointer()</tt> does nothing to prevent the -two assignments to <tt>p->a</tt> and <tt>p->b</tt> -from being reordered. -Can't that also cause problems? -<p>@@QQA@@ -No, it cannot. -The readers cannot see either of these two fields until -the assignment to <tt>gp</tt>, by which time both fields are -fully initialized. -So reordering the assignments -to <tt>p->a</tt> and <tt>p->b</tt> cannot possibly -cause any problems. -<p>@@QQE@@ - -<p> -It is tempting to assume that the reader need not do anything special -to control its accesses to the RCU-protected data, -as shown in <tt>do_something_gp_buggy()</tt> below: - -<blockquote> -<pre> - 1 bool do_something_gp_buggy(void) - 2 { - 3 rcu_read_lock(); - 4 p = gp; /* OPTIMIZATIONS GALORE!!! */ - 5 if (p) { - 6 do_something(p->a, p->b); - 7 rcu_read_unlock(); - 8 return true; - 9 } -10 rcu_read_unlock(); -11 return false; -12 } -</pre> -</blockquote> - -<p> -However, this temptation must be resisted because there are a -surprisingly large number of ways that the compiler -(to say nothing of -<a href="https://h71000.www7.hp.com/wizard/wiz_2637.html">DEC Alpha CPUs</a>) -can trip this code up. -For but one example, if the compiler were short of registers, it -might choose to refetch from <tt>gp</tt> rather than keeping -a separate copy in <tt>p</tt> as follows: - -<blockquote> -<pre> - 1 bool do_something_gp_buggy_optimized(void) - 2 { - 3 rcu_read_lock(); - 4 if (gp) { /* OPTIMIZATIONS GALORE!!! */ -<b> 5 do_something(gp->a, gp->b);</b> - 6 rcu_read_unlock(); - 7 return true; - 8 } - 9 rcu_read_unlock(); -10 return false; -11 } -</pre> -</blockquote> - -<p> -If this function ran concurrently with a series of updates that -replaced the current structure with a new one, -the fetches of <tt>gp->a</tt> -and <tt>gp->b</tt> might well come from two different structures, -which could cause serious confusion. -To prevent this (and much else besides), <tt>do_something_gp()</tt> uses -<tt>rcu_dereference()</tt> to fetch from <tt>gp</tt>: - -<blockquote> -<pre> - 1 bool do_something_gp(void) - 2 { - 3 rcu_read_lock(); - 4 p = rcu_dereference(gp); - 5 if (p) { - 6 do_something(p->a, p->b); - 7 rcu_read_unlock(); - 8 return true; - 9 } -10 rcu_read_unlock(); -11 return false; -12 } -</pre> -</blockquote> - -<p> -The <tt>rcu_dereference()</tt> uses volatile casts and (for DEC Alpha) -memory barriers in the Linux kernel. -Should a -<a href="http://www.rdrop.com/users/paulmck/RCU/consume.2015.07.13a.pdf">high-quality implementation of C11 <tt>memory_order_consume</tt> [PDF]</a> -ever appear, then <tt>rcu_dereference()</tt> could be implemented -as a <tt>memory_order_consume</tt> load. -Regardless of the exact implementation, a pointer fetched by -<tt>rcu_dereference()</tt> may not be used outside of the -outermost RCU read-side critical section containing that -<tt>rcu_dereference()</tt>, unless protection of -the corresponding data element has been passed from RCU to some -other synchronization mechanism, most commonly locking or -<a href="https://www.kernel.org/doc/Documentation/RCU/rcuref.txt">reference counting</a>. - -<p> -In short, updaters use <tt>rcu_assign_pointer()</tt> and readers -use <tt>rcu_dereference()</tt>, and these two RCU API elements -work together to ensure that readers have a consistent view of -newly added data elements. - -<p> -Of course, it is also necessary to remove elements from RCU-protected -data structures, for example, using the following process: - -<ol> -<li> Remove the data element from the enclosing structure. -<li> Wait for all pre-existing RCU read-side critical sections - to complete (because only pre-existing readers can possibly have - a reference to the newly removed data element). -<li> At this point, only the updater has a reference to the - newly removed data element, so it can safely reclaim - the data element, for example, by passing it to <tt>kfree()</tt>. -</ol> - -This process is implemented by <tt>remove_gp_synchronous()</tt>: - -<blockquote> -<pre> - 1 bool remove_gp_synchronous(void) - 2 { - 3 struct foo *p; - 4 - 5 spin_lock(&gp_lock); - 6 p = rcu_access_pointer(gp); - 7 if (!p) { - 8 spin_unlock(&gp_lock); - 9 return false; -10 } -11 rcu_assign_pointer(gp, NULL); -12 spin_unlock(&gp_lock); -13 synchronize_rcu(); -14 kfree(p); -15 return true; -16 } -</pre> -</blockquote> - -<p> -This function is straightforward, with line 13 waiting for a grace -period before line 14 frees the old data element. -This waiting ensures that readers will reach line 7 of -<tt>do_something_gp()</tt> before the data element referenced by -<tt>p</tt> is freed. -The <tt>rcu_access_pointer()</tt> on line 6 is similar to -<tt>rcu_dereference()</tt>, except that: - -<ol> -<li> The value returned by <tt>rcu_access_pointer()</tt> - cannot be dereferenced. - If you want to access the value pointed to as well as - the pointer itself, use <tt>rcu_dereference()</tt> - instead of <tt>rcu_access_pointer()</tt>. -<li> The call to <tt>rcu_access_pointer()</tt> need not be - protected. - In contrast, <tt>rcu_dereference()</tt> must either be - within an RCU read-side critical section or in a code - segment where the pointer cannot change, for example, in - code protected by the corresponding update-side lock. -</ol> - -<p>@@QQ@@ -Without the <tt>rcu_dereference()</tt> or the -<tt>rcu_access_pointer()</tt>, what destructive optimizations -might the compiler make use of? -<p>@@QQA@@ -Let's start with what happens to <tt>do_something_gp()</tt> -if it fails to use <tt>rcu_dereference()</tt>. -It could reuse a value formerly fetched from this same pointer. -It could also fetch the pointer from <tt>gp</tt> in a byte-at-a-time -manner, resulting in <i>load tearing</i>, in turn resulting a bytewise -mash-up of two distince pointer values. -It might even use value-speculation optimizations, where it makes a wrong -guess, but by the time it gets around to checking the value, an update -has changed the pointer to match the wrong guess. -Too bad about any dereferences that returned pre-initialization garbage -in the meantime! - -<p> -For <tt>remove_gp_synchronous()</tt>, as long as all modifications -to <tt>gp</tt> are carried out while holding <tt>gp_lock</tt>, -the above optimizations are harmless. -However, -with <tt>CONFIG_SPARSE_RCU_POINTER=y</tt>, -<tt>sparse</tt> will complain if you -define <tt>gp</tt> with <tt>__rcu</tt> and then -access it without using -either <tt>rcu_access_pointer()</tt> or <tt>rcu_dereference()</tt>. -<p>@@QQE@@ - -<p> -In short, RCU's publish-subscribe guarantee is provided by the combination -of <tt>rcu_assign_pointer()</tt> and <tt>rcu_dereference()</tt>. -This guarantee allows data elements to be safely added to RCU-protected -linked data structures without disrupting RCU readers. -This guarantee can be used in combination with the grace-period -guarantee to also allow data elements to be removed from RCU-protected -linked data structures, again without disrupting RCU readers. - -<p> -This guarantee was only partially premeditated. -DYNIX/ptx used an explicit memory barrier for publication, but had nothing -resembling <tt>rcu_dereference()</tt> for subscription, nor did it -have anything resembling the <tt>smp_read_barrier_depends()</tt> -that was later subsumed into <tt>rcu_dereference()</tt>. -The need for these operations made itself known quite suddenly at a -late-1990s meeting with the DEC Alpha architects, back in the days when -DEC was still a free-standing company. -It took the Alpha architects a good hour to convince me that any sort -of barrier would ever be needed, and it then took me a good <i>two</i> hours -to convince them that their documentation did not make this point clear. -More recent work with the C and C++ standards committees have provided -much education on tricks and traps from the compiler. -In short, compilers were much less tricky in the early 1990s, but in -2015, don't even think about omitting <tt>rcu_dereference()</tt>! - -<h3><a name="Memory-Barrier Guarantees">Memory-Barrier Guarantees</a></h3> - -<p> -The previous section's simple linked-data-structure scenario clearly -demonstrates the need for RCU's stringent memory-ordering guarantees on -systems with more than one CPU: - -<ol> -<li> Each CPU that has an RCU read-side critical section that - begins before <tt>synchronize_rcu()</tt> starts is - guaranteed to execute a full memory barrier between the time - that the RCU read-side critical section ends and the time that - <tt>synchronize_rcu()</tt> returns. - Without this guarantee, a pre-existing RCU read-side critical section - might hold a reference to the newly removed <tt>struct foo</tt> - after the <tt>kfree()</tt> on line 14 of - <tt>remove_gp_synchronous()</tt>. -<li> Each CPU that has an RCU read-side critical section that ends - after <tt>synchronize_rcu()</tt> returns is guaranteed - to execute a full memory barrier between the time that - <tt>synchronize_rcu()</tt> begins and the time that the RCU - read-side critical section begins. - Without this guarantee, a later RCU read-side critical section - running after the <tt>kfree()</tt> on line 14 of - <tt>remove_gp_synchronous()</tt> might - later run <tt>do_something_gp()</tt> and find the - newly deleted <tt>struct foo</tt>. -<li> If the task invoking <tt>synchronize_rcu()</tt> remains - on a given CPU, then that CPU is guaranteed to execute a full - memory barrier sometime during the execution of - <tt>synchronize_rcu()</tt>. - This guarantee ensures that the <tt>kfree()</tt> on - line 14 of <tt>remove_gp_synchronous()</tt> really does - execute after the removal on line 11. -<li> If the task invoking <tt>synchronize_rcu()</tt> migrates - among a group of CPUs during that invocation, then each of the - CPUs in that group is guaranteed to execute a full memory barrier - sometime during the execution of <tt>synchronize_rcu()</tt>. - This guarantee also ensures that the <tt>kfree()</tt> on - line 14 of <tt>remove_gp_synchronous()</tt> really does - execute after the removal on - line 11, but also in the case where the thread executing the - <tt>synchronize_rcu()</tt> migrates in the meantime. -</ol> - -<p>@@QQ@@ -Given that multiple CPUs can start RCU read-side critical sections -at any time without any ordering whatsoever, how can RCU possibly tell whether -or not a given RCU read-side critical section starts before a -given instance of <tt>synchronize_rcu()</tt>? -<p>@@QQA@@ -If RCU cannot tell whether or not a given -RCU read-side critical section starts before a -given instance of <tt>synchronize_rcu()</tt>, -then it must assume that the RCU read-side critical section -started first. -In other words, a given instance of <tt>synchronize_rcu()</tt> -can avoid waiting on a given RCU read-side critical section only -if it can prove that <tt>synchronize_rcu()</tt> started first. -<p>@@QQE@@ - -<p>@@QQ@@ -The first and second guarantees require unbelievably strict ordering! -Are all these memory barriers <i> really</i> required? -<p>@@QQA@@ -Yes, they really are required. -To see why the first guarantee is required, consider the following -sequence of events: - -<ol> -<li> CPU 1: <tt>rcu_read_lock()</tt> -<li> CPU 1: <tt>q = rcu_dereference(gp); - /* Very likely to return p. */</tt> -<li> CPU 0: <tt>list_del_rcu(p);</tt> -<li> CPU 0: <tt>synchronize_rcu()</tt> starts. -<li> CPU 1: <tt>do_something_with(q->a); - /* No smp_mb(), so might happen after kfree(). */</tt> -<li> CPU 1: <tt>rcu_read_unlock()</tt> -<li> CPU 0: <tt>synchronize_rcu()</tt> returns. -<li> CPU 0: <tt>kfree(p);</tt> -</ol> - -<p> -Therefore, there absolutely must be a full memory barrier between the -end of the RCU read-side critical section and the end of the -grace period. - -<p> -The sequence of events demonstrating the necessity of the second rule -is roughly similar: - -<ol> -<li> CPU 0: <tt>list_del_rcu(p);</tt> -<li> CPU 0: <tt>synchronize_rcu()</tt> starts. -<li> CPU 1: <tt>rcu_read_lock()</tt> -<li> CPU 1: <tt>q = rcu_dereference(gp); - /* Might return p if no memory barrier. */</tt> -<li> CPU 0: <tt>synchronize_rcu()</tt> returns. -<li> CPU 0: <tt>kfree(p);</tt> -<li> CPU 1: <tt>do_something_with(q->a); /* Boom!!! */</tt> -<li> CPU 1: <tt>rcu_read_unlock()</tt> -</ol> - -<p> -And similarly, without a memory barrier between the beginning of the -grace period and the beginning of the RCU read-side critical section, -CPU 1 might end up accessing the freelist. - -<p> -The “as if” rule of course applies, so that any implementation -that acts as if the appropriate memory barriers were in place is a -correct implementation. -That said, it is much easier to fool yourself into believing that you have -adhered to the as-if rule than it is to actually adhere to it! -<p>@@QQE@@ - -<p> -Note that these memory-barrier requirements do not replace the fundamental -RCU requirement that a grace period wait for all pre-existing readers. -On the contrary, the memory barriers called out in this section must operate in -such a way as to <i>enforce</i> this fundamental requirement. -Of course, different implementations enforce this requirement in different -ways, but enforce it they must. - -<h3><a name="RCU Primitives Guaranteed to Execute Unconditionally">RCU Primitives Guaranteed to Execute Unconditionally</a></h3> - -<p> -The common-case RCU primitives are unconditional. -They are invoked, they do their job, and they return, with no possibility -of error, and no need to retry. -This is a key RCU design philosophy. - -<p> -However, this philosophy is pragmatic rather than pigheaded. -If someone comes up with a good justification for a particular conditional -RCU primitive, it might well be implemented and added. -After all, this guarantee was reverse-engineered, not premeditated. -The unconditional nature of the RCU primitives was initially an -accident of implementation, and later experience with synchronization -primitives with conditional primitives caused me to elevate this -accident to a guarantee. -Therefore, the justification for adding a conditional primitive to -RCU would need to be based on detailed and compelling use cases. - -<h3><a name="Guaranteed Read-to-Write Upgrade">Guaranteed Read-to-Write Upgrade</a></h3> - -<p> -As far as RCU is concerned, it is always possible to carry out an -update within an RCU read-side critical section. -For example, that RCU read-side critical section might search for -a given data element, and then might acquire the update-side -spinlock in order to update that element, all while remaining -in that RCU read-side critical section. -Of course, it is necessary to exit the RCU read-side critical section -before invoking <tt>synchronize_rcu()</tt>, however, this -inconvenience can be avoided through use of the -<tt>call_rcu()</tt> and <tt>kfree_rcu()</tt> API members -described later in this document. - -<p>@@QQ@@ -But how does the upgrade-to-write operation exclude other readers? -<p>@@QQA@@ -It doesn't, just like normal RCU updates, which also do not exclude -RCU readers. -<p>@@QQE@@ - -<p> -This guarantee allows lookup code to be shared between read-side -and update-side code, and was premeditated, appearing in the earliest -DYNIX/ptx RCU documentation. - -<h2><a name="Fundamental Non-Requirements">Fundamental Non-Requirements</a></h2> - -<p> -RCU provides extremely lightweight readers, and its read-side guarantees, -though quite useful, are correspondingly lightweight. -It is therefore all too easy to assume that RCU is guaranteeing more -than it really is. -Of course, the list of things that RCU does not guarantee is infinitely -long, however, the following sections list a few non-guarantees that -have caused confusion. -Except where otherwise noted, these non-guarantees were premeditated. - -<ol> -<li> <a href="#Readers Impose Minimal Ordering"> - Readers Impose Minimal Ordering</a> -<li> <a href="#Readers Do Not Exclude Updaters"> - Readers Do Not Exclude Updaters</a> -<li> <a href="#Updaters Only Wait For Old Readers"> - Updaters Only Wait For Old Readers</a> -<li> <a href="#Grace Periods Don't Partition Read-Side Critical Sections"> - Grace Periods Don't Partition Read-Side Critical Sections</a> -<li> <a href="#Read-Side Critical Sections Don't Partition Grace Periods"> - Read-Side Critical Sections Don't Partition Grace Periods</a> -<li> <a href="#Disabling Preemption Does Not Block Grace Periods"> - Disabling Preemption Does Not Block Grace Periods</a> -</ol> - -<h3><a name="Readers Impose Minimal Ordering">Readers Impose Minimal Ordering</a></h3> - -<p> -Reader-side markers such as <tt>rcu_read_lock()</tt> and -<tt>rcu_read_unlock()</tt> provide absolutely no ordering guarantees -except through their interaction with the grace-period APIs such as -<tt>synchronize_rcu()</tt>. -To see this, consider the following pair of threads: - -<blockquote> -<pre> - 1 void thread0(void) - 2 { - 3 rcu_read_lock(); - 4 WRITE_ONCE(x, 1); - 5 rcu_read_unlock(); - 6 rcu_read_lock(); - 7 WRITE_ONCE(y, 1); - 8 rcu_read_unlock(); - 9 } -10 -11 void thread1(void) -12 { -13 rcu_read_lock(); -14 r1 = READ_ONCE(y); -15 rcu_read_unlock(); -16 rcu_read_lock(); -17 r2 = READ_ONCE(x); -18 rcu_read_unlock(); -19 } -</pre> -</blockquote> - -<p> -After <tt>thread0()</tt> and <tt>thread1()</tt> execute -concurrently, it is quite possible to have - -<blockquote> -<pre> -(r1 == 1 && r2 == 0) -</pre> -</blockquote> - -(that is, <tt>y</tt> appears to have been assigned before <tt>x</tt>), -which would not be possible if <tt>rcu_read_lock()</tt> and -<tt>rcu_read_unlock()</tt> had much in the way of ordering -properties. -But they do not, so the CPU is within its rights -to do significant reordering. -This is by design: Any significant ordering constraints would slow down -these fast-path APIs. - -<p>@@QQ@@ -Can't the compiler also reorder this code? -<p>@@QQA@@ -No, the volatile casts in <tt>READ_ONCE()</tt> and -<tt>WRITE_ONCE()</tt> prevent the compiler from reordering in -this particular case. -<p>@@QQE@@ - -<h3><a name="Readers Do Not Exclude Updaters">Readers Do Not Exclude Updaters</a></h3> - -<p> -Neither <tt>rcu_read_lock()</tt> nor <tt>rcu_read_unlock()</tt> -exclude updates. -All they do is to prevent grace periods from ending. -The following example illustrates this: - -<blockquote> -<pre> - 1 void thread0(void) - 2 { - 3 rcu_read_lock(); - 4 r1 = READ_ONCE(y); - 5 if (r1) { - 6 do_something_with_nonzero_x(); - 7 r2 = READ_ONCE(x); - 8 WARN_ON(!r2); /* BUG!!! */ - 9 } -10 rcu_read_unlock(); -11 } -12 -13 void thread1(void) -14 { -15 spin_lock(&my_lock); -16 WRITE_ONCE(x, 1); -17 WRITE_ONCE(y, 1); -18 spin_unlock(&my_lock); -19 } -</pre> -</blockquote> - -<p> -If the <tt>thread0()</tt> function's <tt>rcu_read_lock()</tt> -excluded the <tt>thread1()</tt> function's update, -the <tt>WARN_ON()</tt> could never fire. -But the fact is that <tt>rcu_read_lock()</tt> does not exclude -much of anything aside from subsequent grace periods, of which -<tt>thread1()</tt> has none, so the -<tt>WARN_ON()</tt> can and does fire. - -<h3><a name="Updaters Only Wait For Old Readers">Updaters Only Wait For Old Readers</a></h3> - -<p> -It might be tempting to assume that after <tt>synchronize_rcu()</tt> -completes, there are no readers executing. -This temptation must be avoided because -new readers can start immediately after <tt>synchronize_rcu()</tt> -starts, and <tt>synchronize_rcu()</tt> is under no -obligation to wait for these new readers. - -<p>@@QQ@@ -Suppose that synchronize_rcu() did wait until all readers had completed. -Would the updater be able to rely on this? -<p>@@QQA@@ -No. -Even if <tt>synchronize_rcu()</tt> were to wait until -all readers had completed, a new reader might start immediately after -<tt>synchronize_rcu()</tt> completed. -Therefore, the code following -<tt>synchronize_rcu()</tt> cannot rely on there being no readers -in any case. -<p>@@QQE@@ - -<h3><a name="Grace Periods Don't Partition Read-Side Critical Sections"> -Grace Periods Don't Partition Read-Side Critical Sections</a></h3> - -<p> -It is tempting to assume that if any part of one RCU read-side critical -section precedes a given grace period, and if any part of another RCU -read-side critical section follows that same grace period, then all of -the first RCU read-side critical section must precede all of the second. -However, this just isn't the case: A single grace period does not -partition the set of RCU read-side critical sections. -An example of this situation can be illustrated as follows, where -<tt>x</tt>, <tt>y</tt>, and <tt>z</tt> are initially all zero: - -<blockquote> -<pre> - 1 void thread0(void) - 2 { - 3 rcu_read_lock(); - 4 WRITE_ONCE(a, 1); - 5 WRITE_ONCE(b, 1); - 6 rcu_read_unlock(); - 7 } - 8 - 9 void thread1(void) -10 { -11 r1 = READ_ONCE(a); -12 synchronize_rcu(); -13 WRITE_ONCE(c, 1); -14 } -15 -16 void thread2(void) -17 { -18 rcu_read_lock(); -19 r2 = READ_ONCE(b); -20 r3 = READ_ONCE(c); -21 rcu_read_unlock(); -22 } -</pre> -</blockquote> - -<p> -It turns out that the outcome: - -<blockquote> -<pre> -(r1 == 1 && r2 == 0 && r3 == 1) -</pre> -</blockquote> - -is entirely possible. -The following figure show how this can happen, with each circled -<tt>QS</tt> indicating the point at which RCU recorded a -<i>quiescent state</i> for each thread, that is, a state in which -RCU knows that the thread cannot be in the midst of an RCU read-side -critical section that started before the current grace period: - -<p><img src="GPpartitionReaders1.svg" alt="GPpartitionReaders1.svg" width="60%"></p> - -<p> -If it is necessary to partition RCU read-side critical sections in this -manner, it is necessary to use two grace periods, where the first -grace period is known to end before the second grace period starts: - -<blockquote> -<pre> - 1 void thread0(void) - 2 { - 3 rcu_read_lock(); - 4 WRITE_ONCE(a, 1); - 5 WRITE_ONCE(b, 1); - 6 rcu_read_unlock(); - 7 } - 8 - 9 void thread1(void) -10 { -11 r1 = READ_ONCE(a); -12 synchronize_rcu(); -13 WRITE_ONCE(c, 1); -14 } -15 -16 void thread2(void) -17 { -18 r2 = READ_ONCE(c); -19 synchronize_rcu(); -20 WRITE_ONCE(d, 1); -21 } -22 -23 void thread3(void) -24 { -25 rcu_read_lock(); -26 r3 = READ_ONCE(b); -27 r4 = READ_ONCE(d); -28 rcu_read_unlock(); -29 } -</pre> -</blockquote> - -<p> -Here, if <tt>(r1 == 1)</tt>, then -<tt>thread0()</tt>'s write to <tt>b</tt> must happen -before the end of <tt>thread1()</tt>'s grace period. -If in addition <tt>(r4 == 1)</tt>, then -<tt>thread3()</tt>'s read from <tt>b</tt> must happen -after the beginning of <tt>thread2()</tt>'s grace period. -If it is also the case that <tt>(r2 == 1)</tt>, then the -end of <tt>thread1()</tt>'s grace period must precede the -beginning of <tt>thread2()</tt>'s grace period. -This mean that the two RCU read-side critical sections cannot overlap, -guaranteeing that <tt>(r3 == 1)</tt>. -As a result, the outcome: - -<blockquote> -<pre> -(r1 == 1 && r2 == 1 && r3 == 0 && r4 == 1) -</pre> -</blockquote> - -cannot happen. - -<p> -This non-requirement was also non-premeditated, but became apparent -when studying RCU's interaction with memory ordering. - -<h3><a name="Read-Side Critical Sections Don't Partition Grace Periods"> -Read-Side Critical Sections Don't Partition Grace Periods</a></h3> - -<p> -It is also tempting to assume that if an RCU read-side critical section -happens between a pair of grace periods, then those grace periods cannot -overlap. -However, this temptation leads nowhere good, as can be illustrated by -the following, with all variables initially zero: - -<blockquote> -<pre> - 1 void thread0(void) - 2 { - 3 rcu_read_lock(); - 4 WRITE_ONCE(a, 1); - 5 WRITE_ONCE(b, 1); - 6 rcu_read_unlock(); - 7 } - 8 - 9 void thread1(void) -10 { -11 r1 = READ_ONCE(a); -12 synchronize_rcu(); -13 WRITE_ONCE(c, 1); -14 } -15 -16 void thread2(void) -17 { -18 rcu_read_lock(); -19 WRITE_ONCE(d, 1); -20 r2 = READ_ONCE(c); -21 rcu_read_unlock(); -22 } -23 -24 void thread3(void) -25 { -26 r3 = READ_ONCE(d); -27 synchronize_rcu(); -28 WRITE_ONCE(e, 1); -29 } -30 -31 void thread4(void) -32 { -33 rcu_read_lock(); -34 r4 = READ_ONCE(b); -35 r5 = READ_ONCE(e); -36 rcu_read_unlock(); -37 } -</pre> -</blockquote> - -<p> -In this case, the outcome: - -<blockquote> -<pre> -(r1 == 1 && r2 == 1 && r3 == 1 && r4 == 0 && r5 == 1) -</pre> -</blockquote> - -is entirely possible, as illustrated below: - -<p><img src="ReadersPartitionGP1.svg" alt="ReadersPartitionGP1.svg" width="100%"></p> - -<p> -Again, an RCU read-side critical section can overlap almost all of a -given grace period, just so long as it does not overlap the entire -grace period. -As a result, an RCU read-side critical section cannot partition a pair -of RCU grace periods. - -<p>@@QQ@@ -How long a sequence of grace periods, each separated by an RCU read-side -critical section, would be required to partition the RCU read-side -critical sections at the beginning and end of the chain? -<p>@@QQA@@ -In theory, an infinite number. -In practice, an unknown number that is sensitive to both implementation -details and timing considerations. -Therefore, even in practice, RCU users must abide by the theoretical rather -than the practical answer. -<p>@@QQE@@ - -<h3><a name="Disabling Preemption Does Not Block Grace Periods"> -Disabling Preemption Does Not Block Grace Periods</a></h3> - -<p> -There was a time when disabling preemption on any given CPU would block -subsequent grace periods. -However, this was an accident of implementation and is not a requirement. -And in the current Linux-kernel implementation, disabling preemption -on a given CPU in fact does not block grace periods, as Oleg Nesterov -<a href="https://lkml.kernel.org/g/20150614193825.GA19582@redhat.com">demonstrated</a>. - -<p> -If you need a preempt-disable region to block grace periods, you need to add -<tt>rcu_read_lock()</tt> and <tt>rcu_read_unlock()</tt>, for example -as follows: - -<blockquote> -<pre> - 1 preempt_disable(); - 2 rcu_read_lock(); - 3 do_something(); - 4 rcu_read_unlock(); - 5 preempt_enable(); - 6 - 7 /* Spinlocks implicitly disable preemption. */ - 8 spin_lock(&mylock); - 9 rcu_read_lock(); -10 do_something(); -11 rcu_read_unlock(); -12 spin_unlock(&mylock); -</pre> -</blockquote> - -<p> -In theory, you could enter the RCU read-side critical section first, -but it is more efficient to keep the entire RCU read-side critical -section contained in the preempt-disable region as shown above. -Of course, RCU read-side critical sections that extend outside of -preempt-disable regions will work correctly, but such critical sections -can be preempted, which forces <tt>rcu_read_unlock()</tt> to do -more work. -And no, this is <i>not</i> an invitation to enclose all of your RCU -read-side critical sections within preempt-disable regions, because -doing so would degrade real-time response. - -<p> -This non-requirement appeared with preemptible RCU. -If you need a grace period that waits on non-preemptible code regions, use -<a href="#Sched Flavor">RCU-sched</a>. - -<h2><a name="Parallelism Facts of Life">Parallelism Facts of Life</a></h2> - -<p> -These parallelism facts of life are by no means specific to RCU, but -the RCU implementation must abide by them. -They therefore bear repeating: - -<ol> -<li> Any CPU or task may be delayed at any time, - and any attempts to avoid these delays by disabling - preemption, interrupts, or whatever are completely futile. - This is most obvious in preemptible user-level - environments and in virtualized environments (where - a given guest OS's VCPUs can be preempted at any time by - the underlying hypervisor), but can also happen in bare-metal - environments due to ECC errors, NMIs, and other hardware - events. - Although a delay of more than about 20 seconds can result - in splats, the RCU implementation is obligated to use - algorithms that can tolerate extremely long delays, but where - “extremely long” is not long enough to allow - wrap-around when incrementing a 64-bit counter. -<li> Both the compiler and the CPU can reorder memory accesses. - Where it matters, RCU must use compiler directives and - memory-barrier instructions to preserve ordering. -<li> Conflicting writes to memory locations in any given cache line - will result in expensive cache misses. - Greater numbers of concurrent writes and more-frequent - concurrent writes will result in more dramatic slowdowns. - RCU is therefore obligated to use algorithms that have - sufficient locality to avoid significant performance and - scalability problems. -<li> As a rough rule of thumb, only one CPU's worth of processing - may be carried out under the protection of any given exclusive - lock. - RCU must therefore use scalable locking designs. -<li> Counters are finite, especially on 32-bit systems. - RCU's use of counters must therefore tolerate counter wrap, - or be designed such that counter wrap would take way more - time than a single system is likely to run. - An uptime of ten years is quite possible, a runtime - of a century much less so. - As an example of the latter, RCU's dyntick-idle nesting counter - allows 54 bits for interrupt nesting level (this counter - is 64 bits even on a 32-bit system). - Overflowing this counter requires 2<sup>54</sup> - half-interrupts on a given CPU without that CPU ever going idle. - If a half-interrupt happened every microsecond, it would take - 570 years of runtime to overflow this counter, which is currently - believed to be an acceptably long time. -<li> Linux systems can have thousands of CPUs running a single - Linux kernel in a single shared-memory environment. - RCU must therefore pay close attention to high-end scalability. -</ol> - -<p> -This last parallelism fact of life means that RCU must pay special -attention to the preceding facts of life. -The idea that Linux might scale to systems with thousands of CPUs would -have been met with some skepticism in the 1990s, but these requirements -would have otherwise have been unsurprising, even in the early 1990s. - -<h2><a name="Quality-of-Implementation Requirements">Quality-of-Implementation Requirements</a></h2> - -<p> -These sections list quality-of-implementation requirements. -Although an RCU implementation that ignores these requirements could -still be used, it would likely be subject to limitations that would -make it inappropriate for industrial-strength production use. -Classes of quality-of-implementation requirements are as follows: - -<ol> -<li> <a href="#Specialization">Specialization</a> -<li> <a href="#Performance and Scalability">Performance and Scalability</a> -<li> <a href="#Composability">Composability</a> -<li> <a href="#Corner Cases">Corner Cases</a> -</ol> - -<p> -These classes is covered in the following sections. - -<h3><a name="Specialization">Specialization</a></h3> - -<p> -RCU is and always has been intended primarily for read-mostly situations, as -illustrated by the following figure. -This means that RCU's read-side primitives are optimized, often at the -expense of its update-side primitives. - -<p><img src="RCUApplicability.svg" alt="RCUApplicability.svg" width="70%"></p> - -<p> -This focus on read-mostly situations means that RCU must interoperate -with other synchronization primitives. -For example, the <tt>add_gp()</tt> and <tt>remove_gp_synchronous()</tt> -examples discussed earlier use RCU to protect readers and locking to -coordinate updaters. -However, the need extends much farther, requiring that a variety of -synchronization primitives be legal within RCU read-side critical sections, -including spinlocks, sequence locks, atomic operations, reference -counters, and memory barriers. - -<p>@@QQ@@ -What about sleeping locks? -<p>@@QQA@@ -These are forbidden within Linux-kernel RCU read-side critical sections -because it is not legal to place a quiescent state (in this case, -voluntary context switch) within an RCU read-side critical section. -However, sleeping locks may be used within userspace RCU read-side critical -sections, and also within Linux-kernel sleepable RCU -<a href="#Sleepable RCU">(SRCU)</a> -read-side critical sections. -In addition, the -rt patchset turns spinlocks into a sleeping locks so -that the corresponding critical sections can be preempted, which -also means that these sleeplockified spinlocks (but not other sleeping locks!) -may be acquire within -rt-Linux-kernel RCU read-side critical sections. - -<p> -Note that it <i>is</i> legal for a normal RCU read-side critical section -to conditionally acquire a sleeping locks (as in <tt>mutex_trylock()</tt>), -but only as long as it does not loop indefinitely attempting to -conditionally acquire that sleeping locks. -The key point is that things like <tt>mutex_trylock()</tt> -either return with the mutex held, or return an error indication if -the mutex was not immediately available. -Either way, <tt>mutex_trylock()</tt> returns immediately without sleeping. -<p>@@QQE@@ - -<p> -It often comes as a surprise that many algorithms do not require a -consistent view of data, but many can function in that mode, -with network routing being the poster child. -Internet routing algorithms take significant time to propagate -updates, so that by the time an update arrives at a given system, -that system has been sending network traffic the wrong way for -a considerable length of time. -Having a few threads continue to send traffic the wrong way for a -few more milliseconds is clearly not a problem: In the worst case, -TCP retransmissions will eventually get the data where it needs to go. -In general, when tracking the state of the universe outside of the -computer, some level of inconsistency must be tolerated due to -speed-of-light delays if nothing else. - -<p> -Furthermore, uncertainty about external state is inherent in many cases. -For example, a pair of veternarians might use heartbeat to determine -whether or not a given cat was alive. -But how long should they wait after the last heartbeat to decide that -the cat is in fact dead? -Waiting less than 400 milliseconds makes no sense because this would -mean that a relaxed cat would be considered to cycle between death -and life more than 100 times per minute. -Moreover, just as with human beings, a cat's heart might stop for -some period of time, so the exact wait period is a judgment call. -One of our pair of veternarians might wait 30 seconds before pronouncing -the cat dead, while the other might insist on waiting a full minute. -The two veternarians would then disagree on the state of the cat during -the final 30 seconds of the minute following the last heartbeat, as -fancifully illustrated below: - -<p><img src="2013-08-is-it-dead.png" alt="2013-08-is-it-dead.png" width="431"></p> - -<p> -Interestingly enough, this same situation applies to hardware. -When push comes to shove, how do we tell whether or not some -external server has failed? -We send messages to it periodically, and declare it failed if we -don't receive a response within a given period of time. -Policy decisions can usually tolerate short -periods of inconsistency. -The policy was decided some time ago, and is only now being put into -effect, so a few milliseconds of delay is normally inconsequential. - -<p> -However, there are algorithms that absolutely must see consistent data. -For example, the translation between a user-level SystemV semaphore -ID to the corresponding in-kernel data structure is protected by RCU, -but it is absolutely forbidden to update a semaphore that has just been -removed. -In the Linux kernel, this need for consistency is accommodated by acquiring -spinlocks located in the in-kernel data structure from within -the RCU read-side critical section, and this is indicated by the -green box in the figure above. -Many other techniques may be used, and are in fact used within the -Linux kernel. - -<p> -In short, RCU is not required to maintain consistency, and other -mechanisms may be used in concert with RCU when consistency is required. -RCU's specialization allows it to do its job extremely well, and its -ability to interoperate with other synchronization mechanisms allows -the right mix of synchronization tools to be used for a given job. - -<h3><a name="Performance and Scalability">Performance and Scalability</a></h3> - -<p> -Energy efficiency is a critical component of performance today, -and Linux-kernel RCU implementations must therefore avoid unnecessarily -awakening idle CPUs. -I cannot claim that this requirement was premeditated. -In fact, I learned of it during a telephone conversation in which I -was given “frank and open” feedback on the importance -of energy efficiency in battery-powered systems and on specific -energy-efficiency shortcomings of the Linux-kernel RCU implementation. -In my experience, the battery-powered embedded community will consider -any unnecessary wakeups to be extremely unfriendly acts. -So much so that mere Linux-kernel-mailing-list posts are -insufficient to vent their ire. - -<p> -Memory consumption is not particularly important for in most -situations, and has become decreasingly -so as memory sizes have expanded and memory -costs have plummeted. -However, as I learned from Matt Mackall's -<a href="http://elinux.org/Linux_Tiny-FAQ">bloatwatch</a> -efforts, memory footprint is critically important on single-CPU systems with -non-preemptible (<tt>CONFIG_PREEMPT=n</tt>) kernels, and thus -<a href="https://lkml.kernel.org/g/20090113221724.GA15307@linux.vnet.ibm.com">tiny RCU</a> -was born. -Josh Triplett has since taken over the small-memory banner with his -<a href="https://tiny.wiki.kernel.org/">Linux kernel tinification</a> -project, which resulted in -<a href="#Sleepable RCU">SRCU</a> -becoming optional for those kernels not needing it. - -<p> -The remaining performance requirements are, for the most part, -unsurprising. -For example, in keeping with RCU's read-side specialization, -<tt>rcu_dereference()</tt> should have negligible overhead (for -example, suppression of a few minor compiler optimizations). -Similarly, in non-preemptible environments, <tt>rcu_read_lock()</tt> and -<tt>rcu_read_unlock()</tt> should have exactly zero overhead. - -<p> -In preemptible environments, in the case where the RCU read-side -critical section was not preempted (as will be the case for the -highest-priority real-time process), <tt>rcu_read_lock()</tt> and -<tt>rcu_read_unlock()</tt> should have minimal overhead. -In particular, they should not contain atomic read-modify-write -operations, memory-barrier instructions, preemption disabling, -interrupt disabling, or backwards branches. -However, in the case where the RCU read-side critical section was preempted, -<tt>rcu_read_unlock()</tt> may acquire spinlocks and disable interrupts. -This is why it is better to nest an RCU read-side critical section -within a preempt-disable region than vice versa, at least in cases -where that critical section is short enough to avoid unduly degrading -real-time latencies. - -<p> -The <tt>synchronize_rcu()</tt> grace-period-wait primitive is -optimized for throughput. -It may therefore incur several milliseconds of latency in addition to -the duration of the longest RCU read-side critical section. -On the other hand, multiple concurrent invocations of -<tt>synchronize_rcu()</tt> are required to use batching optimizations -so that they can be satisfied by a single underlying grace-period-wait -operation. -For example, in the Linux kernel, it is not unusual for a single -grace-period-wait operation to serve more than -<a href="https://www.usenix.org/conference/2004-usenix-annual-technical-conference/making-rcu-safe-deep-sub-millisecond-response">1,000 separate invocations</a> -of <tt>synchronize_rcu()</tt>, thus amortizing the per-invocation -overhead down to nearly zero. -However, the grace-period optimization is also required to avoid -measurable degradation of real-time scheduling and interrupt latencies. - -<p> -In some cases, the multi-millisecond <tt>synchronize_rcu()</tt> -latencies are unacceptable. -In these cases, <tt>synchronize_rcu_expedited()</tt> may be used -instead, reducing the grace-period latency down to a few tens of -microseconds on small systems, at least in cases where the RCU read-side -critical sections are short. -There are currently no special latency requirements for -<tt>synchronize_rcu_expedited()</tt> on large systems, but, -consistent with the empirical nature of the RCU specification, -that is subject to change. -However, there most definitely are scalability requirements: -A storm of <tt>synchronize_rcu_expedited()</tt> invocations on 4096 -CPUs should at least make reasonable forward progress. -In return for its shorter latencies, <tt>synchronize_rcu_expedited()</tt> -is permitted to impose modest degradation of real-time latency -on non-idle online CPUs. -That said, it will likely be necessary to take further steps to reduce this -degradation, hopefully to roughly that of a scheduling-clock interrupt. - -<p> -There are a number of situations where even -<tt>synchronize_rcu_expedited()</tt>'s reduced grace-period -latency is unacceptable. -In these situations, the asynchronous <tt>call_rcu()</tt> can be -used in place of <tt>synchronize_rcu()</tt> as follows: - -<blockquote> -<pre> - 1 struct foo { - 2 int a; - 3 int b; - 4 struct rcu_head rh; - 5 }; - 6 - 7 static void remove_gp_cb(struct rcu_head *rhp) - 8 { - 9 struct foo *p = container_of(rhp, struct foo, rh); -10 -11 kfree(p); -12 } -13 -14 bool remove_gp_asynchronous(void) -15 { -16 struct foo *p; -17 -18 spin_lock(&gp_lock); -19 p = rcu_dereference(gp); -20 if (!p) { -21 spin_unlock(&gp_lock); -22 return false; -23 } -24 rcu_assign_pointer(gp, NULL); -25 call_rcu(&p->rh, remove_gp_cb); -26 spin_unlock(&gp_lock); -27 return true; -28 } -</pre> -</blockquote> - -<p> -A definition of <tt>struct foo</tt> is finally needed, and appears -on lines 1-5. -The function <tt>remove_gp_cb()</tt> is passed to <tt>call_rcu()</tt> -on line 25, and will be invoked after the end of a subsequent -grace period. -This gets the same effect as <tt>remove_gp_synchronous()</tt>, -but without forcing the updater to wait for a grace period to elapse. -The <tt>call_rcu()</tt> function may be used in a number of -situations where neither <tt>synchronize_rcu()</tt> nor -<tt>synchronize_rcu_expedited()</tt> would be legal, -including within preempt-disable code, <tt>local_bh_disable()</tt> code, -interrupt-disable code, and interrupt handlers. -However, even <tt>call_rcu()</tt> is illegal within NMI handlers. -The callback function (<tt>remove_gp_cb()</tt> in this case) will be -executed within softirq (software interrupt) environment within the -Linux kernel, -either within a real softirq handler or under the protection -of <tt>local_bh_disable()</tt>. -In both the Linux kernel and in userspace, it is bad practice to -write an RCU callback function that takes too long. -Long-running operations should be relegated to separate threads or -(in the Linux kernel) workqueues. - -<p>@@QQ@@ -Why does line 19 use <tt>rcu_access_pointer()</tt>? -After all, <tt>call_rcu()</tt> on line 25 stores into the -structure, which would interact badly with concurrent insertions. -Doesn't this mean that <tt>rcu_dereference()</tt> is required? -<p>@@QQA@@ -Presumably the <tt>->gp_lock</tt> acquired on line 18 excludes -any changes, including any insertions that <tt>rcu_dereference()</tt> -would protect against. -Therefore, any insertions will be delayed until after <tt>->gp_lock</tt> -is released on line 25, which in turn means that -<tt>rcu_access_pointer()</tt> suffices. -<p>@@QQE@@ - -<p> -However, all that <tt>remove_gp_cb()</tt> is doing is -invoking <tt>kfree()</tt> on the data element. -This is a common idiom, and is supported by <tt>kfree_rcu()</tt>, -which allows “fire and forget” operation as shown below: - -<blockquote> -<pre> - 1 struct foo { - 2 int a; - 3 int b; - 4 struct rcu_head rh; - 5 }; - 6 - 7 bool remove_gp_faf(void) - 8 { - 9 struct foo *p; -10 -11 spin_lock(&gp_lock); -12 p = rcu_dereference(gp); -13 if (!p) { -14 spin_unlock(&gp_lock); -15 return false; -16 } -17 rcu_assign_pointer(gp, NULL); -18 kfree_rcu(p, rh); -19 spin_unlock(&gp_lock); -20 return true; -21 } -</pre> -</blockquote> - -<p> -Note that <tt>remove_gp_faf()</tt> simply invokes -<tt>kfree_rcu()</tt> and proceeds, without any need to pay any -further attention to the subsequent grace period and <tt>kfree()</tt>. -It is permissible to invoke <tt>kfree_rcu()</tt> from the same -environments as for <tt>call_rcu()</tt>. -Interestingly enough, DYNIX/ptx had the equivalents of -<tt>call_rcu()</tt> and <tt>kfree_rcu()</tt>, but not -<tt>synchronize_rcu()</tt>. -This was due to the fact that RCU was not heavily used within DYNIX/ptx, -so the very few places that needed something like -<tt>synchronize_rcu()</tt> simply open-coded it. - -<p>@@QQ@@ -Earlier it was claimed that <tt>call_rcu()</tt> and -<tt>kfree_rcu()</tt> allowed updaters to avoid being blocked -by readers. -But how can that be correct, given that the invocation of the callback -and the freeing of the memory (respectively) must still wait for -a grace period to elapse? -<p>@@QQA@@ -We could define things this way, but keep in mind that this sort of -definition would say that updates in garbage-collected languages -cannot complete until the next time the garbage collector runs, -which does not seem at all reasonable. -The key point is that in most cases, an updater using either -<tt>call_rcu()</tt> or <tt>kfree_rcu()</tt> can proceed to the -next update as soon as it has invoked <tt>call_rcu()</tt> or -<tt>kfree_rcu()</tt>, without having to wait for a subsequent -grace period. -<p>@@QQE@@ - -<p> -But what if the updater must wait for the completion of code to be -executed after the end of the grace period, but has other tasks -that can be carried out in the meantime? -The polling-style <tt>get_state_synchronize_rcu()</tt> and -<tt>cond_synchronize_rcu()</tt> functions may be used for this -purpose, as shown below: - -<blockquote> -<pre> - 1 bool remove_gp_poll(void) - 2 { - 3 struct foo *p; - 4 unsigned long s; - 5 - 6 spin_lock(&gp_lock); - 7 p = rcu_access_pointer(gp); - 8 if (!p) { - 9 spin_unlock(&gp_lock); -10 return false; -11 } -12 rcu_assign_pointer(gp, NULL); -13 spin_unlock(&gp_lock); -14 s = get_state_synchronize_rcu(); -15 do_something_while_waiting(); -16 cond_synchronize_rcu(s); -17 kfree(p); -18 return true; -19 } -</pre> -</blockquote> - -<p> -On line 14, <tt>get_state_synchronize_rcu()</tt> obtains a -“cookie” from RCU, -then line 15 carries out other tasks, -and finally, line 16 returns immediately if a grace period has -elapsed in the meantime, but otherwise waits as required. -The need for <tt>get_state_synchronize_rcu</tt> and -<tt>cond_synchronize_rcu()</tt> has appeared quite recently, -so it is too early to tell whether they will stand the test of time. - -<p> -RCU thus provides a range of tools to allow updaters to strike the -required tradeoff between latency, flexibility and CPU overhead. - -<h3><a name="Composability">Composability</a></h3> - -<p> -Composability has received much attention in recent years, perhaps in part -due to the collision of multicore hardware with object-oriented techniques -designed in single-threaded environments for single-threaded use. -And in theory, RCU read-side critical sections may be composed, and in -fact may be nested arbitrarily deeply. -In practice, as with all real-world implementations of composable -constructs, there are limitations. - -<p> -Implementations of RCU for which <tt>rcu_read_lock()</tt> -and <tt>rcu_read_unlock()</tt> generate no code, such as -Linux-kernel RCU when <tt>CONFIG_PREEMPT=n</tt>, can be -nested arbitrarily deeply. -After all, there is no overhead. -Except that if all these instances of <tt>rcu_read_lock()</tt> -and <tt>rcu_read_unlock()</tt> are visible to the compiler, -compilation will eventually fail due to exhausting memory, -mass storage, or user patience, whichever comes first. -If the nesting is not visible to the compiler, as is the case with -mutually recursive functions each in its own translation unit, -stack overflow will result. -If the nesting takes the form of loops, either the control variable -will overflow or (in the Linux kernel) you will get an RCU CPU stall warning. -Nevertheless, this class of RCU implementations is one -of the most composable constructs in existence. - -<p> -RCU implementations that explicitly track nesting depth -are limited by the nesting-depth counter. -For example, the Linux kernel's preemptible RCU limits nesting to -<tt>INT_MAX</tt>. -This should suffice for almost all practical purposes. -That said, a consecutive pair of RCU read-side critical sections -between which there is an operation that waits for a grace period -cannot be enclosed in another RCU read-side critical section. -This is because it is not legal to wait for a grace period within -an RCU read-side critical section: To do so would result either -in deadlock or -in RCU implicitly splitting the enclosing RCU read-side critical -section, neither of which is conducive to a long-lived and prosperous -kernel. - -<p> -It is worth noting that RCU is not alone in limiting composability. -For example, many transactional-memory implementations prohibit -composing a pair of transactions separated by an irrevocable -operation (for example, a network receive operation). -For another example, lock-based critical sections can be composed -surprisingly freely, but only if deadlock is avoided. - -<p> -In short, although RCU read-side critical sections are highly composable, -care is required in some situations, just as is the case for any other -composable synchronization mechanism. - -<h3><a name="Corner Cases">Corner Cases</a></h3> - -<p> -A given RCU workload might have an endless and intense stream of -RCU read-side critical sections, perhaps even so intense that there -was never a point in time during which there was not at least one -RCU read-side critical section in flight. -RCU cannot allow this situation to block grace periods: As long as -all the RCU read-side critical sections are finite, grace periods -must also be finite. - -<p> -That said, preemptible RCU implementations could potentially result -in RCU read-side critical sections being preempted for long durations, -which has the effect of creating a long-duration RCU read-side -critical section. -This situation can arise only in heavily loaded systems, but systems using -real-time priorities are of course more vulnerable. -Therefore, RCU priority boosting is provided to help deal with this -case. -That said, the exact requirements on RCU priority boosting will likely -evolve as more experience accumulates. - -<p> -Other workloads might have very high update rates. -Although one can argue that such workloads should instead use -something other than RCU, the fact remains that RCU must -handle such workloads gracefully. -This requirement is another factor driving batching of grace periods, -but it is also the driving force behind the checks for large numbers -of queued RCU callbacks in the <tt>call_rcu()</tt> code path. -Finally, high update rates should not delay RCU read-side critical -sections, although some read-side delays can occur when using -<tt>synchronize_rcu_expedited()</tt>, courtesy of this function's use -of <tt>try_stop_cpus()</tt>. -(In the future, <tt>synchronize_rcu_expedited()</tt> will be -converted to use lighter-weight inter-processor interrupts (IPIs), -but this will still disturb readers, though to a much smaller degree.) - -<p> -Although all three of these corner cases were understood in the early -1990s, a simple user-level test consisting of <tt>close(open(path))</tt> -in a tight loop -in the early 2000s suddenly provided a much deeper appreciation of the -high-update-rate corner case. -This test also motivated addition of some RCU code to react to high update -rates, for example, if a given CPU finds itself with more than 10,000 -RCU callbacks queued, it will cause RCU to take evasive action by -more aggressively starting grace periods and more aggressively forcing -completion of grace-period processing. -This evasive action causes the grace period to complete more quickly, -but at the cost of restricting RCU's batching optimizations, thus -increasing the CPU overhead incurred by that grace period. - -<h2><a name="Software-Engineering Requirements"> -Software-Engineering Requirements</a></h2> - -<p> -Between Murphy's Law and “To err is human”, it is necessary to -guard against mishaps and misuse: - -<ol> -<li> It is all too easy to forget to use <tt>rcu_read_lock()</tt> - everywhere that it is needed, so kernels built with - <tt>CONFIG_PROVE_RCU=y</tt> will spat if - <tt>rcu_dereference()</tt> is used outside of an - RCU read-side critical section. - Update-side code can use <tt>rcu_dereference_protected()</tt>, - which takes a - <a href="https://lwn.net/Articles/371986/">lockdep expression</a> - to indicate what is providing the protection. - If the indicated protection is not provided, a lockdep splat - is emitted. - - <p> - Code shared between readers and updaters can use - <tt>rcu_dereference_check()</tt>, which also takes a - lockdep expression, and emits a lockdep splat if neither - <tt>rcu_read_lock()</tt> nor the indicated protection - is in place. - In addition, <tt>rcu_dereference_raw()</tt> is used in those - (hopefully rare) cases where the required protection cannot - be easily described. - Finally, <tt>rcu_read_lock_held()</tt> is provided to - allow a function to verify that it has been invoked within - an RCU read-side critical section. - I was made aware of this set of requirements shortly after Thomas - Gleixner audited a number of RCU uses. -<li> A given function might wish to check for RCU-related preconditions - upon entry, before using any other RCU API. - The <tt>rcu_lockdep_assert()</tt> does this job, - asserting the expression in kernels having lockdep enabled - and doing nothing otherwise. -<li> It is also easy to forget to use <tt>rcu_assign_pointer()</tt> - and <tt>rcu_dereference()</tt>, perhaps (incorrectly) - substituting a simple assignment. - To catch this sort of error, a given RCU-protected pointer may be - tagged with <tt>__rcu</tt>, after which running sparse - with <tt>CONFIG_SPARSE_RCU_POINTER=y</tt> will complain - about simple-assignment accesses to that pointer. - Arnd Bergmann made me aware of this requirement, and also - supplied the needed - <a href="https://lwn.net/Articles/376011/">patch series</a>. -<li> Kernels built with <tt>CONFIG_DEBUG_OBJECTS_RCU_HEAD=y</tt> - will splat if a data element is passed to <tt>call_rcu()</tt> - twice in a row, without a grace period in between. - (This error is similar to a double free.) - The corresponding <tt>rcu_head</tt> structures that are - dynamically allocated are automatically tracked, but - <tt>rcu_head</tt> structures allocated on the stack - must be initialized with <tt>init_rcu_head_on_stack()</tt> - and cleaned up with <tt>destroy_rcu_head_on_stack()</tt>. - Similarly, statically allocated non-stack <tt>rcu_head</tt> - structures must be initialized with <tt>init_rcu_head()</tt> - and cleaned up with <tt>destroy_rcu_head()</tt>. - Mathieu Desnoyers made me aware of this requirement, and also - supplied the needed - <a href="https://lkml.kernel.org/g/20100319013024.GA28456@Krystal">patch</a>. -<li> An infinite loop in an RCU read-side critical section will - eventually trigger an RCU CPU stall warning splat, with - the duration of “eventually” being controlled by the - <tt>RCU_CPU_STALL_TIMEOUT</tt> <tt>Kconfig</tt> option, or, - alternatively, by the - <tt>rcupdate.rcu_cpu_stall_timeout</tt> boot/sysfs - parameter. - However, RCU is not obligated to produce this splat - unless there is a grace period waiting on that particular - RCU read-side critical section. - <p> - Some extreme workloads might intentionally delay - RCU grace periods, and systems running those workloads can - be booted with <tt>rcupdate.rcu_cpu_stall_suppress</tt> - to suppress the splats. - This kernel parameter may also be set via <tt>sysfs</tt>. - Furthermore, RCU CPU stall warnings are counter-productive - during sysrq dumps and during panics. - RCU therefore supplies the <tt>rcu_sysrq_start()</tt> and - <tt>rcu_sysrq_end()</tt> API members to be called before - and after long sysrq dumps. - RCU also supplies the <tt>rcu_panic()</tt> notifier that is - automatically invoked at the beginning of a panic to suppress - further RCU CPU stall warnings. - - <p> - This requirement made itself known in the early 1990s, pretty - much the first time that it was necessary to debug a CPU stall. - That said, the initial implementation in DYNIX/ptx was quite - generic in comparison with that of Linux. -<li> Although it would be very good to detect pointers leaking out - of RCU read-side critical sections, there is currently no - good way of doing this. - One complication is the need to distinguish between pointers - leaking and pointers that have been handed off from RCU to - some other synchronization mechanism, for example, reference - counting. -<li> In kernels built with <tt>CONFIG_RCU_TRACE=y</tt>, RCU-related - information is provided via both debugfs and event tracing. -<li> Open-coded use of <tt>rcu_assign_pointer()</tt> and - <tt>rcu_dereference()</tt> to create typical linked - data structures can be surprisingly error-prone. - Therefore, RCU-protected - <a href="https://lwn.net/Articles/609973/#RCU List APIs">linked lists</a> - and, more recently, RCU-protected - <a href="https://lwn.net/Articles/612100/">hash tables</a> - are available. - Many other special-purpose RCU-protected data structures are - available in the Linux kernel and the userspace RCU library. -<li> Some linked structures are created at compile time, but still - require <tt>__rcu</tt> checking. - The <tt>RCU_POINTER_INITIALIZER()</tt> macro serves this - purpose. -<li> It is not necessary to use <tt>rcu_assign_pointer()</tt> - when creating linked structures that are to be published via - a single external pointer. - The <tt>RCU_INIT_POINTER()</tt> macro is provided for - this task and also for assigning <tt>NULL</tt> pointers - at runtime. -</ol> - -<p> -This not a hard-and-fast list: RCU's diagnostic capabilities will -continue to be guided by the number and type of usage bugs found -in real-world RCU usage. - -<h2><a name="Linux Kernel Complications">Linux Kernel Complications</a></h2> - -<p> -The Linux kernel provides an interesting environment for all kinds of -software, including RCU. -Some of the relevant points of interest are as follows: - -<ol> -<li> <a href="#Configuration">Configuration</a>. -<li> <a href="#Firmware Interface">Firmware Interface</a>. -<li> <a href="#Early Boot">Early Boot</a>. -<li> <a href="#Interrupts and NMIs"> - Interrupts and non-maskable interrupts (NMIs)</a>. -<li> <a href="#Loadable Modules">Loadable Modules</a>. -<li> <a href="#Hotplug CPU">Hotplug CPU</a>. -<li> <a href="#Scheduler and RCU">Scheduler and RCU</a>. -<li> <a href="#Tracing and RCU">Tracing and RCU</a>. -<li> <a href="#Energy Efficiency">Energy Efficiency</a>. -<li> <a href="#Memory Efficiency">Memory Efficiency</a>. -<li> <a href="#Performance, Scalability, Response Time, and Reliability"> - Performance, Scalability, Response Time, and Reliability</a>. -</ol> - -<p> -This list is probably incomplete, but it does give a feel for the -most notable Linux-kernel complications. -Each of the following sections covers one of the above topics. - -<h3><a name="Configuration">Configuration</a></h3> - -<p> -RCU's goal is automatic configuration, so that almost nobody -needs to worry about RCU's <tt>Kconfig</tt> options. -And for almost all users, RCU does in fact work well -“out of the box.” - -<p> -However, there are specialized use cases that are handled by -kernel boot parameters and <tt>Kconfig</tt> options. -Unfortunately, the <tt>Kconfig</tt> system will explicitly ask users -about new <tt>Kconfig</tt> options, which requires almost all of them -be hidden behind a <tt>CONFIG_RCU_EXPERT</tt> <tt>Kconfig</tt> option. - -<p> -This all should be quite obvious, but the fact remains that -Linus Torvalds recently had to -<a href="https://lkml.kernel.org/g/CA+55aFy4wcCwaL4okTs8wXhGZ5h-ibecy_Meg9C4MNQrUnwMcg@mail.gmail.com">remind</a> -me of this requirement. - -<h3><a name="Firmware Interface">Firmware Interface</a></h3> - -<p> -In many cases, kernel obtains information about the system from the -firmware, and sometimes things are lost in translation. -Or the translation is accurate, but the original message is bogus. - -<p> -For example, some systems' firmware overreports the number of CPUs, -sometimes by a large factor. -If RCU naively believed the firmware, as it used to do, -it would create too many per-CPU kthreads. -Although the resulting system will still run correctly, the extra -kthreads needlessly consume memory and can cause confusion -when they show up in <tt>ps</tt> listings. - -<p> -RCU must therefore wait for a given CPU to actually come online before -it can allow itself to believe that the CPU actually exists. -The resulting “ghost CPUs” (which are never going to -come online) cause a number of -<a href="https://paulmck.livejournal.com/37494.html">interesting complications</a>. - -<h3><a name="Early Boot">Early Boot</a></h3> - -<p> -The Linux kernel's boot sequence is an interesting process, -and RCU is used early, even before <tt>rcu_init()</tt> -is invoked. -In fact, a number of RCU's primitives can be used as soon as the -initial task's <tt>task_struct</tt> is available and the -boot CPU's per-CPU variables are set up. -The read-side primitives (<tt>rcu_read_lock()</tt>, -<tt>rcu_read_unlock()</tt>, <tt>rcu_dereference()</tt>, -and <tt>rcu_access_pointer()</tt>) will operate normally very early on, -as will <tt>rcu_assign_pointer()</tt>. - -<p> -Although <tt>call_rcu()</tt> may be invoked at any -time during boot, callbacks are not guaranteed to be invoked until after -the scheduler is fully up and running. -This delay in callback invocation is due to the fact that RCU does not -invoke callbacks until it is fully initialized, and this full initialization -cannot occur until after the scheduler has initialized itself to the -point where RCU can spawn and run its kthreads. -In theory, it would be possible to invoke callbacks earlier, -however, this is not a panacea because there would be severe restrictions -on what operations those callbacks could invoke. - -<p> -Perhaps surprisingly, <tt>synchronize_rcu()</tt>, -<a href="#Bottom-Half Flavor"><tt>synchronize_rcu_bh()</tt></a> -(<a href="#Bottom-Half Flavor">discussed below</a>), -and -<a href="#Sched Flavor"><tt>synchronize_sched()</tt></a> -will all operate normally -during very early boot, the reason being that there is only one CPU -and preemption is disabled. -This means that the call <tt>synchronize_rcu()</tt> (or friends) -itself is a quiescent -state and thus a grace period, so the early-boot implementation can -be a no-op. - -<p> -Both <tt>synchronize_rcu_bh()</tt> and <tt>synchronize_sched()</tt> -continue to operate normally through the remainder of boot, courtesy -of the fact that preemption is disabled across their RCU read-side -critical sections and also courtesy of the fact that there is still -only one CPU. -However, once the scheduler starts initializing, preemption is enabled. -There is still only a single CPU, but the fact that preemption is enabled -means that the no-op implementation of <tt>synchronize_rcu()</tt> no -longer works in <tt>CONFIG_PREEMPT=y</tt> kernels. -Therefore, as soon as the scheduler starts initializing, the early-boot -fastpath is disabled. -This means that <tt>synchronize_rcu()</tt> switches to its runtime -mode of operation where it posts callbacks, which in turn means that -any call to <tt>synchronize_rcu()</tt> will block until the corresponding -callback is invoked. -Unfortunately, the callback cannot be invoked until RCU's runtime -grace-period machinery is up and running, which cannot happen until -the scheduler has initialized itself sufficiently to allow RCU's -kthreads to be spawned. -Therefore, invoking <tt>synchronize_rcu()</tt> during scheduler -initialization can result in deadlock. - -<p>@@QQ@@ -So what happens with <tt>synchronize_rcu()</tt> during -scheduler initialization for <tt>CONFIG_PREEMPT=n</tt> -kernels? -<p>@@QQA@@ -In <tt>CONFIG_PREEMPT=n</tt> kernel, <tt>synchronize_rcu()</tt> -maps directly to <tt>synchronize_sched()</tt>. -Therefore, <tt>synchronize_rcu()</tt> works normally throughout -boot in <tt>CONFIG_PREEMPT=n</tt> kernels. -However, your code must also work in <tt>CONFIG_PREEMPT=y</tt> kernels, -so it is still necessary to avoid invoking <tt>synchronize_rcu()</tt> -during scheduler initialization. -<p>@@QQE@@ - -<p> -I learned of these boot-time requirements as a result of a series of -system hangs. - -<h3><a name="Interrupts and NMIs">Interrupts and NMIs</a></h3> - -<p> -The Linux kernel has interrupts, and RCU read-side critical sections are -legal within interrupt handlers and within interrupt-disabled regions -of code, as are invocations of <tt>call_rcu()</tt>. - -<p> -Some Linux-kernel architectures can enter an interrupt handler from -non-idle process context, and then just never leave it, instead stealthily -transitioning back to process context. -This trick is sometimes used to invoke system calls from inside the kernel. -These “half-interrupts” mean that RCU has to be very careful -about how it counts interrupt nesting levels. -I learned of this requirement the hard way during a rewrite -of RCU's dyntick-idle code. - -<p> -The Linux kernel has non-maskable interrupts (NMIs), and -RCU read-side critical sections are legal within NMI handlers. -Thankfully, RCU update-side primitives, including -<tt>call_rcu()</tt>, are prohibited within NMI handlers. - -<p> -The name notwithstanding, some Linux-kernel architectures -can have nested NMIs, which RCU must handle correctly. -Andy Lutomirski -<a href="https://lkml.kernel.org/g/CALCETrXLq1y7e_dKFPgou-FKHB6Pu-r8+t-6Ds+8=va7anBWDA@mail.gmail.com">surprised me</a> -with this requirement; -he also kindly surprised me with -<a href="https://lkml.kernel.org/g/CALCETrXSY9JpW3uE6H8WYk81sg56qasA2aqmjMPsq5dOtzso=g@mail.gmail.com">an algorithm</a> -that meets this requirement. - -<h3><a name="Loadable Modules">Loadable Modules</a></h3> - -<p> -The Linux kernel has loadable modules, and these modules can -also be unloaded. -After a given module has been unloaded, any attempt to call -one of its functions results in a segmentation fault. -The module-unload functions must therefore cancel any -delayed calls to loadable-module functions, for example, -any outstanding <tt>mod_timer()</tt> must be dealt with -via <tt>del_timer_sync()</tt> or similar. - -<p> -Unfortunately, there is no way to cancel an RCU callback; -once you invoke <tt>call_rcu()</tt>, the callback function is -going to eventually be invoked, unless the system goes down first. -Because it is normally considered socially irresponsible to crash the system -in response to a module unload request, we need some other way -to deal with in-flight RCU callbacks. - -<p> -RCU therefore provides -<tt><a href="https://lwn.net/Articles/217484/">rcu_barrier()</a></tt>, -which waits until all in-flight RCU callbacks have been invoked. -If a module uses <tt>call_rcu()</tt>, its exit function should therefore -prevent any future invocation of <tt>call_rcu()</tt>, then invoke -<tt>rcu_barrier()</tt>. -In theory, the underlying module-unload code could invoke -<tt>rcu_barrier()</tt> unconditionally, but in practice this would -incur unacceptable latencies. - -<p> -Nikita Danilov noted this requirement for an analogous filesystem-unmount -situation, and Dipankar Sarma incorporated <tt>rcu_barrier()</tt> into RCU. -The need for <tt>rcu_barrier()</tt> for module unloading became -apparent later. - -<h3><a name="Hotplug CPU">Hotplug CPU</a></h3> - -<p> -The Linux kernel supports CPU hotplug, which means that CPUs -can come and go. -It is of course illegal to use any RCU API member from an offline CPU. -This requirement was present from day one in DYNIX/ptx, but -on the other hand, the Linux kernel's CPU-hotplug implementation -is “interesting.” - -<p> -The Linux-kernel CPU-hotplug implementation has notifiers that -are used to allow the various kernel subsystems (including RCU) -to respond appropriately to a given CPU-hotplug operation. -Most RCU operations may be invoked from CPU-hotplug notifiers, -including even normal synchronous grace-period operations -such as <tt>synchronize_rcu()</tt>. -However, expedited grace-period operations such as -<tt>synchronize_rcu_expedited()</tt> are not supported, -due to the fact that current implementations block CPU-hotplug -operations, which could result in deadlock. - -<p> -In addition, all-callback-wait operations such as -<tt>rcu_barrier()</tt> are also not supported, due to the -fact that there are phases of CPU-hotplug operations where -the outgoing CPU's callbacks will not be invoked until after -the CPU-hotplug operation ends, which could also result in deadlock. - -<h3><a name="Scheduler and RCU">Scheduler and RCU</a></h3> - -<p> -RCU depends on the scheduler, and the scheduler uses RCU to -protect some of its data structures. -This means the scheduler is forbidden from acquiring -the runqueue locks and the priority-inheritance locks -in the middle of an outermost RCU read-side critical section unless either -(1) it releases them before exiting that same -RCU read-side critical section, or -(2) interrupts are disabled across -that entire RCU read-side critical section. -This same prohibition also applies (recursively!) to any lock that is acquired -while holding any lock to which this prohibition applies. -Adhering to this rule prevents preemptible RCU from invoking -<tt>rcu_read_unlock_special()</tt> while either runqueue or -priority-inheritance locks are held, thus avoiding deadlock. - -<p> -Prior to v4.4, it was only necessary to disable preemption across -RCU read-side critical sections that acquired scheduler locks. -In v4.4, expedited grace periods started using IPIs, and these -IPIs could force a <tt>rcu_read_unlock()</tt> to take the slowpath. -Therefore, this expedited-grace-period change required disabling of -interrupts, not just preemption. - -<p> -For RCU's part, the preemptible-RCU <tt>rcu_read_unlock()</tt> -implementation must be written carefully to avoid similar deadlocks. -In particular, <tt>rcu_read_unlock()</tt> must tolerate an -interrupt where the interrupt handler invokes both -<tt>rcu_read_lock()</tt> and <tt>rcu_read_unlock()</tt>. -This possibility requires <tt>rcu_read_unlock()</tt> to use -negative nesting levels to avoid destructive recursion via -interrupt handler's use of RCU. - -<p> -This pair of mutual scheduler-RCU requirements came as a -<a href="https://lwn.net/Articles/453002/">complete surprise</a>. - -<p> -As noted above, RCU makes use of kthreads, and it is necessary to -avoid excessive CPU-time accumulation by these kthreads. -This requirement was no surprise, but RCU's violation of it -when running context-switch-heavy workloads when built with -<tt>CONFIG_NO_HZ_FULL=y</tt> -<a href="http://www.rdrop.com/users/paulmck/scalability/paper/BareMetal.2015.01.15b.pdf">did come as a surprise [PDF]</a>. -RCU has made good progress towards meeting this requirement, even -for context-switch-have <tt>CONFIG_NO_HZ_FULL=y</tt> workloads, -but there is room for further improvement. - -<h3><a name="Tracing and RCU">Tracing and RCU</a></h3> - -<p> -It is possible to use tracing on RCU code, but tracing itself -uses RCU. -For this reason, <tt>rcu_dereference_raw_notrace()</tt> -is provided for use by tracing, which avoids the destructive -recursion that could otherwise ensue. -This API is also used by virtualization in some architectures, -where RCU readers execute in environments in which tracing -cannot be used. -The tracing folks both located the requirement and provided the -needed fix, so this surprise requirement was relatively painless. - -<h3><a name="Energy Efficiency">Energy Efficiency</a></h3> - -<p> -Interrupting idle CPUs is considered socially unacceptable, -especially by people with battery-powered embedded systems. -RCU therefore conserves energy by detecting which CPUs are -idle, including tracking CPUs that have been interrupted from idle. -This is a large part of the energy-efficiency requirement, -so I learned of this via an irate phone call. - -<p> -Because RCU avoids interrupting idle CPUs, it is illegal to -execute an RCU read-side critical section on an idle CPU. -(Kernels built with <tt>CONFIG_PROVE_RCU=y</tt> will splat -if you try it.) -The <tt>RCU_NONIDLE()</tt> macro and <tt>_rcuidle</tt> -event tracing is provided to work around this restriction. -In addition, <tt>rcu_is_watching()</tt> may be used to -test whether or not it is currently legal to run RCU read-side -critical sections on this CPU. -I learned of the need for diagnostics on the one hand -and <tt>RCU_NONIDLE()</tt> on the other while inspecting -idle-loop code. -Steven Rostedt supplied <tt>_rcuidle</tt> event tracing, -which is used quite heavily in the idle loop. - -<p> -It is similarly socially unacceptable to interrupt an -<tt>nohz_full</tt> CPU running in userspace. -RCU must therefore track <tt>nohz_full</tt> userspace -execution. -And in -<a href="https://lwn.net/Articles/558284/"><tt>CONFIG_NO_HZ_FULL_SYSIDLE=y</tt></a> -kernels, RCU must separately track idle CPUs on the one hand and -CPUs that are either idle or executing in userspace on the other. -In both cases, RCU must be able to sample state at two points in -time, and be able to determine whether or not some other CPU spent -any time idle and/or executing in userspace. - -<p> -These energy-efficiency requirements have proven quite difficult to -understand and to meet, for example, there have been more than five -clean-sheet rewrites of RCU's energy-efficiency code, the last of -which was finally able to demonstrate -<a href="http://www.rdrop.com/users/paulmck/realtime/paper/AMPenergy.2013.04.19a.pdf">real energy savings running on real hardware [PDF]</a>. -As noted earlier, -I learned of many of these requirements via angry phone calls: -Flaming me on the Linux-kernel mailing list was apparently not -sufficient to fully vent their ire at RCU's energy-efficiency bugs! - -<h3><a name="Memory Efficiency">Memory Efficiency</a></h3> - -<p> -Although small-memory non-realtime systems can simply use Tiny RCU, -code size is only one aspect of memory efficiency. -Another aspect is the size of the <tt>rcu_head</tt> structure -used by <tt>call_rcu()</tt> and <tt>kfree_rcu()</tt>. -Although this structure contains nothing more than a pair of pointers, -it does appear in many RCU-protected data structures, including -some that are size critical. -The <tt>page</tt> structure is a case in point, as evidenced by -the many occurrences of the <tt>union</tt> keyword within that structure. - -<p> -This need for memory efficiency is one reason that RCU uses hand-crafted -singly linked lists to track the <tt>rcu_head</tt> structures that -are waiting for a grace period to elapse. -It is also the reason why <tt>rcu_head</tt> structures do not contain -debug information, such as fields tracking the file and line of the -<tt>call_rcu()</tt> or <tt>kfree_rcu()</tt> that posted them. -Although this information might appear in debug-only kernel builds at some -point, in the meantime, the <tt>->func</tt> field will often provide -the needed debug information. - -<p> -However, in some cases, the need for memory efficiency leads to even -more extreme measures. -Returning to the <tt>page</tt> structure, the <tt>rcu_head</tt> field -shares storage with a great many other structures that are used at -various points in the corresponding page's lifetime. -In order to correctly resolve certain -<a href="https://lkml.kernel.org/g/1439976106-137226-1-git-send-email-kirill.shutemov@linux.intel.com">race conditions</a>, -the Linux kernel's memory-management subsystem needs a particular bit -to remain zero during all phases of grace-period processing, -and that bit happens to map to the bottom bit of the -<tt>rcu_head</tt> structure's <tt>->next</tt> field. -RCU makes this guarantee as long as <tt>call_rcu()</tt> -is used to post the callback, as opposed to <tt>kfree_rcu()</tt> -or some future “lazy” -variant of <tt>call_rcu()</tt> that might one day be created for -energy-efficiency purposes. - -<h3><a name="Performance, Scalability, Response Time, and Reliability"> -Performance, Scalability, Response Time, and Reliability</a></h3> - -<p> -Expanding on the -<a href="#Performance and Scalability">earlier discussion</a>, -RCU is used heavily by hot code paths in performance-critical -portions of the Linux kernel's networking, security, virtualization, -and scheduling code paths. -RCU must therefore use efficient implementations, especially in its -read-side primitives. -To that end, it would be good if preemptible RCU's implementation -of <tt>rcu_read_lock()</tt> could be inlined, however, doing -this requires resolving <tt>#include</tt> issues with the -<tt>task_struct</tt> structure. - -<p> -The Linux kernel supports hardware configurations with up to -4096 CPUs, which means that RCU must be extremely scalable. -Algorithms that involve frequent acquisitions of global locks or -frequent atomic operations on global variables simply cannot be -tolerated within the RCU implementation. -RCU therefore makes heavy use of a combining tree based on the -<tt>rcu_node</tt> structure. -RCU is required to tolerate all CPUs continuously invoking any -combination of RCU's runtime primitives with minimal per-operation -overhead. -In fact, in many cases, increasing load must <i>decrease</i> the -per-operation overhead, witness the batching optimizations for -<tt>synchronize_rcu()</tt>, <tt>call_rcu()</tt>, -<tt>synchronize_rcu_expedited()</tt>, and <tt>rcu_barrier()</tt>. -As a general rule, RCU must cheerfully accept whatever the -rest of the Linux kernel decides to throw at it. - -<p> -The Linux kernel is used for real-time workloads, especially -in conjunction with the -<a href="https://rt.wiki.kernel.org/index.php/Main_Page">-rt patchset</a>. -The real-time-latency response requirements are such that the -traditional approach of disabling preemption across RCU -read-side critical sections is inappropriate. -Kernels built with <tt>CONFIG_PREEMPT=y</tt> therefore -use an RCU implementation that allows RCU read-side critical -sections to be preempted. -This requirement made its presence known after users made it -clear that an earlier -<a href="https://lwn.net/Articles/107930/">real-time patch</a> -did not meet their needs, in conjunction with some -<a href="https://lkml.kernel.org/g/20050318002026.GA2693@us.ibm.com">RCU issues</a> -encountered by a very early version of the -rt patchset. - -<p> -In addition, RCU must make do with a sub-100-microsecond real-time latency -budget. -In fact, on smaller systems with the -rt patchset, the Linux kernel -provides sub-20-microsecond real-time latencies for the whole kernel, -including RCU. -RCU's scalability and latency must therefore be sufficient for -these sorts of configurations. -To my surprise, the sub-100-microsecond real-time latency budget -<a href="http://www.rdrop.com/users/paulmck/realtime/paper/bigrt.2013.01.31a.LCA.pdf"> -applies to even the largest systems [PDF]</a>, -up to and including systems with 4096 CPUs. -This real-time requirement motivated the grace-period kthread, which -also simplified handling of a number of race conditions. - -<p> -Finally, RCU's status as a synchronization primitive means that -any RCU failure can result in arbitrary memory corruption that can be -extremely difficult to debug. -This means that RCU must be extremely reliable, which in -practice also means that RCU must have an aggressive stress-test -suite. -This stress-test suite is called <tt>rcutorture</tt>. - -<p> -Although the need for <tt>rcutorture</tt> was no surprise, -the current immense popularity of the Linux kernel is posing -interesting—and perhaps unprecedented—validation -challenges. -To see this, keep in mind that there are well over one billion -instances of the Linux kernel running today, given Android -smartphones, Linux-powered televisions, and servers. -This number can be expected to increase sharply with the advent of -the celebrated Internet of Things. - -<p> -Suppose that RCU contains a race condition that manifests on average -once per million years of runtime. -This bug will be occurring about three times per <i>day</i> across -the installed base. -RCU could simply hide behind hardware error rates, given that no one -should really expect their smartphone to last for a million years. -However, anyone taking too much comfort from this thought should -consider the fact that in most jurisdictions, a successful multi-year -test of a given mechanism, which might include a Linux kernel, -suffices for a number of types of safety-critical certifications. -In fact, rumor has it that the Linux kernel is already being used -in production for safety-critical applications. -I don't know about you, but I would feel quite bad if a bug in RCU -killed someone. -Which might explain my recent focus on validation and verification. - -<h2><a name="Other RCU Flavors">Other RCU Flavors</a></h2> - -<p> -One of the more surprising things about RCU is that there are now -no fewer than five <i>flavors</i>, or API families. -In addition, the primary flavor that has been the sole focus up to -this point has two different implementations, non-preemptible and -preemptible. -The other four flavors are listed below, with requirements for each -described in a separate section. - -<ol> -<li> <a href="#Bottom-Half Flavor">Bottom-Half Flavor</a> -<li> <a href="#Sched Flavor">Sched Flavor</a> -<li> <a href="#Sleepable RCU">Sleepable RCU</a> -<li> <a href="#Tasks RCU">Tasks RCU</a> -</ol> - -<h3><a name="Bottom-Half Flavor">Bottom-Half Flavor</a></h3> - -<p> -The softirq-disable (AKA “bottom-half”, -hence the “_bh” abbreviations) -flavor of RCU, or <i>RCU-bh</i>, was developed by -Dipankar Sarma to provide a flavor of RCU that could withstand the -network-based denial-of-service attacks researched by Robert -Olsson. -These attacks placed so much networking load on the system -that some of the CPUs never exited softirq execution, -which in turn prevented those CPUs from ever executing a context switch, -which, in the RCU implementation of that time, prevented grace periods -from ever ending. -The result was an out-of-memory condition and a system hang. - -<p> -The solution was the creation of RCU-bh, which does -<tt>local_bh_disable()</tt> -across its read-side critical sections, and which uses the transition -from one type of softirq processing to another as a quiescent state -in addition to context switch, idle, user mode, and offline. -This means that RCU-bh grace periods can complete even when some of -the CPUs execute in softirq indefinitely, thus allowing algorithms -based on RCU-bh to withstand network-based denial-of-service attacks. - -<p> -Because -<tt>rcu_read_lock_bh()</tt> and <tt>rcu_read_unlock_bh()</tt> -disable and re-enable softirq handlers, any attempt to start a softirq -handlers during the -RCU-bh read-side critical section will be deferred. -In this case, <tt>rcu_read_unlock_bh()</tt> -will invoke softirq processing, which can take considerable time. -One can of course argue that this softirq overhead should be associated -with the code following the RCU-bh read-side critical section rather -than <tt>rcu_read_unlock_bh()</tt>, but the fact -is that most profiling tools cannot be expected to make this sort -of fine distinction. -For example, suppose that a three-millisecond-long RCU-bh read-side -critical section executes during a time of heavy networking load. -There will very likely be an attempt to invoke at least one softirq -handler during that three milliseconds, but any such invocation will -be delayed until the time of the <tt>rcu_read_unlock_bh()</tt>. -This can of course make it appear at first glance as if -<tt>rcu_read_unlock_bh()</tt> was executing very slowly. - -<p> -The -<a href="https://lwn.net/Articles/609973/#RCU Per-Flavor API Table">RCU-bh API</a> -includes -<tt>rcu_read_lock_bh()</tt>, -<tt>rcu_read_unlock_bh()</tt>, -<tt>rcu_dereference_bh()</tt>, -<tt>rcu_dereference_bh_check()</tt>, -<tt>synchronize_rcu_bh()</tt>, -<tt>synchronize_rcu_bh_expedited()</tt>, -<tt>call_rcu_bh()</tt>, -<tt>rcu_barrier_bh()</tt>, and -<tt>rcu_read_lock_bh_held()</tt>. - -<h3><a name="Sched Flavor">Sched Flavor</a></h3> - -<p> -Before preemptible RCU, waiting for an RCU grace period had the -side effect of also waiting for all pre-existing interrupt -and NMI handlers. -However, there are legitimate preemptible-RCU implementations that -do not have this property, given that any point in the code outside -of an RCU read-side critical section can be a quiescent state. -Therefore, <i>RCU-sched</i> was created, which follows “classic” -RCU in that an RCU-sched grace period waits for for pre-existing -interrupt and NMI handlers. -In kernels built with <tt>CONFIG_PREEMPT=n</tt>, the RCU and RCU-sched -APIs have identical implementations, while kernels built with -<tt>CONFIG_PREEMPT=y</tt> provide a separate implementation for each. - -<p> -Note well that in <tt>CONFIG_PREEMPT=y</tt> kernels, -<tt>rcu_read_lock_sched()</tt> and <tt>rcu_read_unlock_sched()</tt> -disable and re-enable preemption, respectively. -This means that if there was a preemption attempt during the -RCU-sched read-side critical section, <tt>rcu_read_unlock_sched()</tt> -will enter the scheduler, with all the latency and overhead entailed. -Just as with <tt>rcu_read_unlock_bh()</tt>, this can make it look -as if <tt>rcu_read_unlock_sched()</tt> was executing very slowly. -However, the highest-priority task won't be preempted, so that task -will enjoy low-overhead <tt>rcu_read_unlock_sched()</tt> invocations. - -<p> -The -<a href="https://lwn.net/Articles/609973/#RCU Per-Flavor API Table">RCU-sched API</a> -includes -<tt>rcu_read_lock_sched()</tt>, -<tt>rcu_read_unlock_sched()</tt>, -<tt>rcu_read_lock_sched_notrace()</tt>, -<tt>rcu_read_unlock_sched_notrace()</tt>, -<tt>rcu_dereference_sched()</tt>, -<tt>rcu_dereference_sched_check()</tt>, -<tt>synchronize_sched()</tt>, -<tt>synchronize_rcu_sched_expedited()</tt>, -<tt>call_rcu_sched()</tt>, -<tt>rcu_barrier_sched()</tt>, and -<tt>rcu_read_lock_sched_held()</tt>. -However, anything that disables preemption also marks an RCU-sched -read-side critical section, including -<tt>preempt_disable()</tt> and <tt>preempt_enable()</tt>, -<tt>local_irq_save()</tt> and <tt>local_irq_restore()</tt>, -and so on. - -<h3><a name="Sleepable RCU">Sleepable RCU</a></h3> - -<p> -For well over a decade, someone saying “I need to block within -an RCU read-side critical section” was a reliable indication -that this someone did not understand RCU. -After all, if you are always blocking in an RCU read-side critical -section, you can probably afford to use a higher-overhead synchronization -mechanism. -However, that changed with the advent of the Linux kernel's notifiers, -whose RCU read-side critical -sections almost never sleep, but sometimes need to. -This resulted in the introduction of -<a href="https://lwn.net/Articles/202847/">sleepable RCU</a>, -or <i>SRCU</i>. - -<p> -SRCU allows different domains to be defined, with each such domain -defined by an instance of an <tt>srcu_struct</tt> structure. -A pointer to this structure must be passed in to each SRCU function, -for example, <tt>synchronize_srcu(&ss)</tt>, where -<tt>ss</tt> is the <tt>srcu_struct</tt> structure. -The key benefit of these domains is that a slow SRCU reader in one -domain does not delay an SRCU grace period in some other domain. -That said, one consequence of these domains is that read-side code -must pass a “cookie” from <tt>srcu_read_lock()</tt> -to <tt>srcu_read_unlock()</tt>, for example, as follows: - -<blockquote> -<pre> - 1 int idx; - 2 - 3 idx = srcu_read_lock(&ss); - 4 do_something(); - 5 srcu_read_unlock(&ss, idx); -</pre> -</blockquote> - -<p> -As noted above, it is legal to block within SRCU read-side critical sections, -however, with great power comes great responsibility. -If you block forever in one of a given domain's SRCU read-side critical -sections, then that domain's grace periods will also be blocked forever. -Of course, one good way to block forever is to deadlock, which can -happen if any operation in a given domain's SRCU read-side critical -section can block waiting, either directly or indirectly, for that domain's -grace period to elapse. -For example, this results in a self-deadlock: - -<blockquote> -<pre> - 1 int idx; - 2 - 3 idx = srcu_read_lock(&ss); - 4 do_something(); - 5 synchronize_srcu(&ss); - 6 srcu_read_unlock(&ss, idx); -</pre> -</blockquote> - -<p> -However, if line 5 acquired a mutex that was held across -a <tt>synchronize_srcu()</tt> for domain <tt>ss</tt>, -deadlock would still be possible. -Furthermore, if line 5 acquired a mutex that was held across -a <tt>synchronize_srcu()</tt> for some other domain <tt>ss1</tt>, -and if an <tt>ss1</tt>-domain SRCU read-side critical section -acquired another mutex that was held across as <tt>ss</tt>-domain -<tt>synchronize_srcu()</tt>, -deadlock would again be possible. -Such a deadlock cycle could extend across an arbitrarily large number -of different SRCU domains. -Again, with great power comes great responsibility. - -<p> -Unlike the other RCU flavors, SRCU read-side critical sections can -run on idle and even offline CPUs. -This ability requires that <tt>srcu_read_lock()</tt> and -<tt>srcu_read_unlock()</tt> contain memory barriers, which means -that SRCU readers will run a bit slower than would RCU readers. -It also motivates the <tt>smp_mb__after_srcu_read_unlock()</tt> -API, which, in combination with <tt>srcu_read_unlock()</tt>, -guarantees a full memory barrier. - -<p> -The -<a href="https://lwn.net/Articles/609973/#RCU Per-Flavor API Table">SRCU API</a> -includes -<tt>srcu_read_lock()</tt>, -<tt>srcu_read_unlock()</tt>, -<tt>srcu_dereference()</tt>, -<tt>srcu_dereference_check()</tt>, -<tt>synchronize_srcu()</tt>, -<tt>synchronize_srcu_expedited()</tt>, -<tt>call_srcu()</tt>, -<tt>srcu_barrier()</tt>, and -<tt>srcu_read_lock_held()</tt>. -It also includes -<tt>DEFINE_SRCU()</tt>, -<tt>DEFINE_STATIC_SRCU()</tt>, and -<tt>init_srcu_struct()</tt> -APIs for defining and initializing <tt>srcu_struct</tt> structures. - -<h3><a name="Tasks RCU">Tasks RCU</a></h3> - -<p> -Some forms of tracing use “tramopolines” to handle the -binary rewriting required to install different types of probes. -It would be good to be able to free old trampolines, which sounds -like a job for some form of RCU. -However, because it is necessary to be able to install a trace -anywhere in the code, it is not possible to use read-side markers -such as <tt>rcu_read_lock()</tt> and <tt>rcu_read_unlock()</tt>. -In addition, it does not work to have these markers in the trampoline -itself, because there would need to be instructions following -<tt>rcu_read_unlock()</tt>. -Although <tt>synchronize_rcu()</tt> would guarantee that execution -reached the <tt>rcu_read_unlock()</tt>, it would not be able to -guarantee that execution had completely left the trampoline. - -<p> -The solution, in the form of -<a href="https://lwn.net/Articles/607117/"><i>Tasks RCU</i></a>, -is to have implicit -read-side critical sections that are delimited by voluntary context -switches, that is, calls to <tt>schedule()</tt>, -<tt>cond_resched_rcu_qs()</tt>, and -<tt>synchronize_rcu_tasks()</tt>. -In addition, transitions to and from userspace execution also delimit -tasks-RCU read-side critical sections. - -<p> -The tasks-RCU API is quite compact, consisting only of -<tt>call_rcu_tasks()</tt>, -<tt>synchronize_rcu_tasks()</tt>, and -<tt>rcu_barrier_tasks()</tt>. - -<h2><a name="Possible Future Changes">Possible Future Changes</a></h2> - -<p> -One of the tricks that RCU uses to attain update-side scalability is -to increase grace-period latency with increasing numbers of CPUs. -If this becomes a serious problem, it will be necessary to rework the -grace-period state machine so as to avoid the need for the additional -latency. - -<p> -Expedited grace periods scan the CPUs, so their latency and overhead -increases with increasing numbers of CPUs. -If this becomes a serious problem on large systems, it will be necessary -to do some redesign to avoid this scalability problem. - -<p> -RCU disables CPU hotplug in a few places, perhaps most notably in the -expedited grace-period and <tt>rcu_barrier()</tt> operations. -If there is a strong reason to use expedited grace periods in CPU-hotplug -notifiers, it will be necessary to avoid disabling CPU hotplug. -This would introduce some complexity, so there had better be a <i>very</i> -good reason. - -<p> -The tradeoff between grace-period latency on the one hand and interruptions -of other CPUs on the other hand may need to be re-examined. -The desire is of course for zero grace-period latency as well as zero -interprocessor interrupts undertaken during an expedited grace period -operation. -While this ideal is unlikely to be achievable, it is quite possible that -further improvements can be made. - -<p> -The multiprocessor implementations of RCU use a combining tree that -groups CPUs so as to reduce lock contention and increase cache locality. -However, this combining tree does not spread its memory across NUMA -nodes nor does it align the CPU groups with hardware features such -as sockets or cores. -Such spreading and alignment is currently believed to be unnecessary -because the hotpath read-side primitives do not access the combining -tree, nor does <tt>call_rcu()</tt> in the common case. -If you believe that your architecture needs such spreading and alignment, -then your architecture should also benefit from the -<tt>rcutree.rcu_fanout_leaf</tt> boot parameter, which can be set -to the number of CPUs in a socket, NUMA node, or whatever. -If the number of CPUs is too large, use a fraction of the number of -CPUs. -If the number of CPUs is a large prime number, well, that certainly -is an “interesting” architectural choice! -More flexible arrangements might be considered, but only if -<tt>rcutree.rcu_fanout_leaf</tt> has proven inadequate, and only -if the inadequacy has been demonstrated by a carefully run and -realistic system-level workload. - -<p> -Please note that arrangements that require RCU to remap CPU numbers will -require extremely good demonstration of need and full exploration of -alternatives. - -<p> -There is an embarrassingly large number of flavors of RCU, and this -number has been increasing over time. -Perhaps it will be possible to combine some at some future date. - -<p> -RCU's various kthreads are reasonably recent additions. -It is quite likely that adjustments will be required to more gracefully -handle extreme loads. -It might also be necessary to be able to relate CPU utilization by -RCU's kthreads and softirq handlers to the code that instigated this -CPU utilization. -For example, RCU callback overhead might be charged back to the -originating <tt>call_rcu()</tt> instance, though probably not -in production kernels. - -<h2><a name="Summary">Summary</a></h2> - -<p> -This document has presented more than two decade's worth of RCU -requirements. -Given that the requirements keep changing, this will not be the last -word on this subject, but at least it serves to get an important -subset of the requirements set forth. - -<h2><a name="Acknowledgments">Acknowledgments</a></h2> - -I am grateful to Steven Rostedt, Lai Jiangshan, Ingo Molnar, -Oleg Nesterov, Borislav Petkov, Peter Zijlstra, Boqun Feng, and -Andy Lutomirski for their help in rendering -this article human readable, and to Michelle Rankin for her support -of this effort. -Other contributions are acknowledged in the Linux kernel's git archive. -The cartoon is copyright (c) 2013 by Melissa Broussard, -and is provided -under the terms of the Creative Commons Attribution-Share Alike 3.0 -United States license. - -<p>@@QQAL@@ - -</body></html> diff --git a/Documentation/RCU/Design/htmlqqz.sh b/Documentation/RCU/Design/htmlqqz.sh deleted file mode 100755 index d354f069559b..000000000000 --- a/Documentation/RCU/Design/htmlqqz.sh +++ /dev/null @@ -1,108 +0,0 @@ -#!/bin/sh -# -# Usage: sh htmlqqz.sh file -# -# Extracts and converts quick quizzes in a proto-HTML document file.htmlx. -# Commands, all of which must be on a line by themselves: -# -# "<p>@@QQ@@": Start of a quick quiz. -# "<p>@@QQA@@": Start of a quick-quiz answer. -# "<p>@@QQE@@": End of a quick-quiz answer, and thus of the quick quiz. -# "<p>@@QQAL@@": Place to put quick-quiz answer list. -# -# Places the result in file.html. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# -# Copyright (c) 2013 Paul E. McKenney, IBM Corporation. - -fn=$1 -if test ! -r $fn.htmlx -then - echo "Error: $fn.htmlx unreadable." - exit 1 -fi - -echo "<!-- DO NOT HAND EDIT. -->" > $fn.html -echo "<!-- Instead, edit $fn.htmlx and run 'sh htmlqqz.sh $fn' -->" >> $fn.html -awk < $fn.htmlx >> $fn.html ' - -state == "" && $1 != "<p>@@QQ@@" && $1 != "<p>@@QQAL@@" { - print $0; - if ($0 ~ /^<p>@@QQ/) - print "Bad Quick Quiz command: " NR " (expected <p>@@QQ@@ or <p>@@QQAL@@)." > "/dev/stderr" - next; -} - -state == "" && $1 == "<p>@@QQ@@" { - qqn++; - qqlineno = NR; - haveqq = 1; - state = "qq"; - print "<p><a name=\"Quick Quiz " qqn "\"><b>Quick Quiz " qqn "</b>:</a>" - next; -} - -state == "qq" && $1 != "<p>@@QQA@@" { - qq[qqn] = qq[qqn] $0 "\n"; - print $0 - if ($0 ~ /^<p>@@QQ/) - print "Bad Quick Quiz command: " NR ". (expected <p>@@QQA@@)" > "/dev/stderr" - next; -} - -state == "qq" && $1 == "<p>@@QQA@@" { - state = "qqa"; - print "<br><a href=\"#qq" qqn "answer\">Answer</a>" - next; -} - -state == "qqa" && $1 != "<p>@@QQE@@" { - qqa[qqn] = qqa[qqn] $0 "\n"; - if ($0 ~ /^<p>@@QQ/) - print "Bad Quick Quiz command: " NR " (expected <p>@@QQE@@)." > "/dev/stderr" - next; -} - -state == "qqa" && $1 == "<p>@@QQE@@" { - state = ""; - next; -} - -state == "" && $1 == "<p>@@QQAL@@" { - haveqq = ""; - print "<h3><a name=\"Answers to Quick Quizzes\">" - print "Answers to Quick Quizzes</a></h3>" - print ""; - for (i = 1; i <= qqn; i++) { - print "<a name=\"qq" i "answer\"></a>" - print "<p><b>Quick Quiz " i "</b>:" - print qq[i]; - print ""; - print "</p><p><b>Answer</b>:" - print qqa[i]; - print ""; - print "</p><p><a href=\"#Quick%20Quiz%20" i "\"><b>Back to Quick Quiz " i "</b>.</a>" - print ""; - } - next; -} - -END { - if (state != "") - print "Unterminated Quick Quiz: " qqlineno "." > "/dev/stderr" - else if (haveqq) - print "Missing \"<p>@@QQAL@@\", no Quick Quiz." > "/dev/stderr" -}' diff --git a/Documentation/RCU/RTFP.txt b/Documentation/RCU/RTFP.txt index 370ca006db7a..9bccf16736f7 100644 --- a/Documentation/RCU/RTFP.txt +++ b/Documentation/RCU/RTFP.txt @@ -176,13 +176,13 @@ a history of how Linux changed RCU more than RCU changed Linux which Mathieu Desnoyers is now maintaining [MathieuDesnoyers2009URCU] [MathieuDesnoyersPhD]. TINY_RCU [PaulEMcKenney2009BloatWatchRCU] made its appearance, as did expedited RCU [PaulEMcKenney2009expeditedRCU]. -The problem of resizeable RCU-protected hash tables may now be on a path +The problem of resizable RCU-protected hash tables may now be on a path to a solution [JoshTriplett2009RPHash]. A few academic researchers are now using RCU to solve their parallel problems [HariKannan2009DynamicAnalysisRCU]. 2010 produced a simpler preemptible-RCU implementation based on TREE_RCU [PaulEMcKenney2010SimpleOptRCU], lockdep-RCU -[PaulEMcKenney2010LockdepRCU], another resizeable RCU-protected hash +[PaulEMcKenney2010LockdepRCU], another resizable RCU-protected hash table [HerbertXu2010RCUResizeHash] (this one consuming more memory, but allowing arbitrary changes in hash function, as required for DoS avoidance in the networking code), realization of the 2009 RCU-protected @@ -193,7 +193,7 @@ the RCU API [PaulEMcKenney2010RCUAPI]. [LinusTorvalds2011Linux2:6:38:rc1:NPigginVFS], an RCU-protected red-black tree using software transactional memory to protect concurrent updates (strange, but true!) [PhilHoward2011RCUTMRBTree], yet another variant of -RCU-protected resizeable hash tables [Triplett:2011:RPHash], the 3.0 RCU +RCU-protected resizable hash tables [Triplett:2011:RPHash], the 3.0 RCU trainwreck [PaulEMcKenney2011RCU3.0trainwreck], and Neil Brown's "Meet the Lockers" LWN article [NeilBrown2011MeetTheLockers]. Some academic work looked at debugging uses of RCU [Seyster:2011:RFA:2075416.2075425]. diff --git a/Documentation/RCU/trace.txt b/Documentation/RCU/trace.txt index ec6998b1b6d0..00a3a38b375a 100644 --- a/Documentation/RCU/trace.txt +++ b/Documentation/RCU/trace.txt @@ -237,17 +237,17 @@ o "ktl" is the low-order 16 bits (in hexadecimal) of the count of The output of "cat rcu/rcu_preempt/rcuexp" looks as follows: -s=21872 wd0=0 wd1=0 wd2=0 wd3=5 n=0 enq=0 sc=21872 +s=21872 wd1=0 wd2=0 wd3=5 n=0 enq=0 sc=21872 These fields are as follows: o "s" is the sequence number, with an odd number indicating that an expedited grace period is in progress. -o "wd0", "wd1", "wd2", and "wd3" are the number of times that an - attempt to start an expedited grace period found that someone - else had completed an expedited grace period that satisfies the - attempted request. "Our work is done." +o "wd1", "wd2", and "wd3" are the number of times that an attempt + to start an expedited grace period found that someone else had + completed an expedited grace period that satisfies the attempted + request. "Our work is done." o "n" is number of times that a concurrent CPU-hotplug operation forced a fallback to a normal grace period. diff --git a/Documentation/RCU/whatisRCU.txt b/Documentation/RCU/whatisRCU.txt index dc49c6712b17..111770ffa10e 100644 --- a/Documentation/RCU/whatisRCU.txt +++ b/Documentation/RCU/whatisRCU.txt @@ -681,22 +681,30 @@ Although RCU can be used in many different ways, a very common use of RCU is analogous to reader-writer locking. The following unified diff shows how closely related RCU and reader-writer locking can be. + @@ -5,5 +5,5 @@ struct el { + int data; + /* Other data fields */ + }; + -rwlock_t listmutex; + +spinlock_t listmutex; + struct el head; + @@ -13,15 +14,15 @@ struct list_head *lp; struct el *p; - - read_lock(); + - read_lock(&listmutex); - list_for_each_entry(p, head, lp) { + rcu_read_lock(); + list_for_each_entry_rcu(p, head, lp) { if (p->key == key) { *result = p->data; - - read_unlock(); + - read_unlock(&listmutex); + rcu_read_unlock(); return 1; } } - - read_unlock(); + - read_unlock(&listmutex); + rcu_read_unlock(); return 0; } @@ -732,7 +740,7 @@ Or, for those who prefer a side-by-side listing: 5 int data; 5 int data; 6 /* Other data fields */ 6 /* Other data fields */ 7 }; 7 }; - 8 spinlock_t listmutex; 8 spinlock_t listmutex; + 8 rwlock_t listmutex; 8 spinlock_t listmutex; 9 struct el head; 9 struct el head; 1 int search(long key, int *result) 1 int search(long key, int *result) @@ -740,15 +748,15 @@ Or, for those who prefer a side-by-side listing: 3 struct list_head *lp; 3 struct list_head *lp; 4 struct el *p; 4 struct el *p; 5 5 - 6 read_lock(); 6 rcu_read_lock(); + 6 read_lock(&listmutex); 6 rcu_read_lock(); 7 list_for_each_entry(p, head, lp) { 7 list_for_each_entry_rcu(p, head, lp) { 8 if (p->key == key) { 8 if (p->key == key) { 9 *result = p->data; 9 *result = p->data; -10 read_unlock(); 10 rcu_read_unlock(); +10 read_unlock(&listmutex); 10 rcu_read_unlock(); 11 return 1; 11 return 1; 12 } 12 } 13 } 13 } -14 read_unlock(); 14 rcu_read_unlock(); +14 read_unlock(&listmutex); 14 rcu_read_unlock(); 15 return 0; 15 return 0; 16 } 16 } diff --git a/Documentation/accounting/getdelays.c b/Documentation/accounting/getdelays.c index 7785fb5eb93f..b5ca536e56a8 100644 --- a/Documentation/accounting/getdelays.c +++ b/Documentation/accounting/getdelays.c @@ -505,6 +505,8 @@ int main(int argc, char *argv[]) if (!loop) goto done; break; + case TASKSTATS_TYPE_NULL: + break; default: fprintf(stderr, "Unknown nested" " nla_type %d\n", @@ -512,7 +514,8 @@ int main(int argc, char *argv[]) break; } len2 += NLA_ALIGN(na->nla_len); - na = (struct nlattr *) ((char *) na + len2); + na = (struct nlattr *)((char *)na + + NLA_ALIGN(na->nla_len)); } break; diff --git a/Documentation/acpi/initrd_table_override.txt b/Documentation/acpi/initrd_table_override.txt index 35c3f5415476..eb651a6aa285 100644 --- a/Documentation/acpi/initrd_table_override.txt +++ b/Documentation/acpi/initrd_table_override.txt @@ -1,5 +1,5 @@ -Overriding ACPI tables via initrd -================================= +Upgrading ACPI tables via initrd +================================ 1) Introduction (What is this about) 2) What is this for @@ -9,12 +9,14 @@ Overriding ACPI tables via initrd 1) What is this about --------------------- -If the ACPI_INITRD_TABLE_OVERRIDE compile option is true, it is possible to -override nearly any ACPI table provided by the BIOS with an instrumented, -modified one. +If the ACPI_TABLE_UPGRADE compile option is true, it is possible to +upgrade the ACPI execution environment that is defined by the ACPI tables +via upgrading the ACPI tables provided by the BIOS with an instrumented, +modified, more recent version one, or installing brand new ACPI tables. -For a full list of ACPI tables that can be overridden, take a look at -the char *table_sigs[MAX_ACPI_SIGNATURE]; definition in drivers/acpi/osl.c +For a full list of ACPI tables that can be upgraded/installed, take a look +at the char *table_sigs[MAX_ACPI_SIGNATURE]; definition in +drivers/acpi/tables.c. All ACPI tables iasl (Intel's ACPI compiler and disassembler) knows should be overridable, except: - ACPI_SIG_RSDP (has a signature of 6 bytes) @@ -25,17 +27,20 @@ Both could get implemented as well. 2) What is this for ------------------- -Please keep in mind that this is a debug option. -ACPI tables should not get overridden for productive use. -If BIOS ACPI tables are overridden the kernel will get tainted with the -TAINT_OVERRIDDEN_ACPI_TABLE flag. -Complain to your platform/BIOS vendor if you find a bug which is so sever -that a workaround is not accepted in the Linux kernel. +Complain to your platform/BIOS vendor if you find a bug which is so severe +that a workaround is not accepted in the Linux kernel. And this facility +allows you to upgrade the buggy tables before your platform/BIOS vendor +releases an upgraded BIOS binary. -Still, it can and should be enabled in any kernel, because: - - There is no functional change with not instrumented initrds - - It provides a powerful feature to easily debug and test ACPI BIOS table - compatibility with the Linux kernel. +This facility can be used by platform/BIOS vendors to provide a Linux +compatible environment without modifying the underlying platform firmware. + +This facility also provides a powerful feature to easily debug and test +ACPI BIOS table compatibility with the Linux kernel by modifying old +platform provided ACPI tables or inserting new ACPI tables. + +It can and should be enabled in any kernel because there is no functional +change with not instrumented initrds. 3) How does it work @@ -50,23 +55,31 @@ iasl -d *.dat # For example add this statement into a _PRT (PCI Routing Table) function # of the DSDT: Store("HELLO WORLD", debug) +# And increase the OEM Revision. For example, before modification: +DefinitionBlock ("DSDT.aml", "DSDT", 2, "INTEL ", "TEMPLATE", 0x00000000) +# After modification: +DefinitionBlock ("DSDT.aml", "DSDT", 2, "INTEL ", "TEMPLATE", 0x00000001) iasl -sa dsdt.dsl # Add the raw ACPI tables to an uncompressed cpio archive. -# They must be put into a /kernel/firmware/acpi directory inside the -# cpio archive. -# The uncompressed cpio archive must be the first. -# Other, typically compressed cpio archives, must be -# concatenated on top of the uncompressed one. +# They must be put into a /kernel/firmware/acpi directory inside the cpio +# archive. Note that if the table put here matches a platform table +# (similar Table Signature, and similar OEMID, and similar OEM Table ID) +# with a more recent OEM Revision, the platform table will be upgraded by +# this table. If the table put here doesn't match a platform table +# (dissimilar Table Signature, or dissimilar OEMID, or dissimilar OEM Table +# ID), this table will be appended. mkdir -p kernel/firmware/acpi cp dsdt.aml kernel/firmware/acpi -# A maximum of: #define ACPI_OVERRIDE_TABLES 10 -# tables are currently allowed (see osl.c): +# A maximum of "NR_ACPI_INITRD_TABLES (64)" tables are currently allowed +# (see osl.c): iasl -sa facp.dsl iasl -sa ssdt1.dsl cp facp.aml kernel/firmware/acpi cp ssdt1.aml kernel/firmware/acpi -# Create the uncompressed cpio archive and concatenate the original initrd -# on top: +# The uncompressed cpio archive must be the first. Other, typically +# compressed cpio archives, must be concatenated on top of the uncompressed +# one. Following command creates the uncompressed cpio archive and +# concatenates the original initrd on top: find kernel | cpio -H newc --create > /boot/instrumented_initrd cat /boot/initrd >>/boot/instrumented_initrd # reboot with increased acpi debug level, e.g. boot params: diff --git a/Documentation/adding-syscalls.txt b/Documentation/adding-syscalls.txt index cc2d4ac4f404..bbb31e091b28 100644 --- a/Documentation/adding-syscalls.txt +++ b/Documentation/adding-syscalls.txt @@ -136,7 +136,7 @@ an fxyzzy(3) operation for free: - xyzzyat(fd, "", ..., AT_EMPTY_PATH) is equivalent to fxyzzy(fd, ...) (For more details on the rationale of the *at() calls, see the openat(2) man -page; for an example of AT_EMPTY_PATH, see the statat(2) man page.) +page; for an example of AT_EMPTY_PATH, see the fstatat(2) man page.) If your new xyzzy(2) system call involves a parameter describing an offset within a file, make its type loff_t so that 64-bit offsets can be supported diff --git a/Documentation/arm/SA1100/Assabet b/Documentation/arm/SA1100/Assabet index 08b885d35674..e08a6739e72c 100644 --- a/Documentation/arm/SA1100/Assabet +++ b/Documentation/arm/SA1100/Assabet @@ -214,7 +214,7 @@ RedBoot scripting ----------------- All the commands above aren't so useful if they have to be typed in every -time the Assabet is rebooted. Therefore it's possible to automatize the boot +time the Assabet is rebooted. Therefore it's possible to automate the boot process using RedBoot's scripting capability. For example, I use this to boot Linux with both the kernel and the ramdisk diff --git a/Documentation/arm64/booting.txt b/Documentation/arm64/booting.txt index 56d6d8b796db..8d0df62c3fe0 100644 --- a/Documentation/arm64/booting.txt +++ b/Documentation/arm64/booting.txt @@ -132,6 +132,10 @@ NOTE: versions prior to v4.6 cannot make use of memory below the physical offset of the Image so it is recommended that the Image be placed as close as possible to the start of system RAM. +If an initrd/initramfs is passed to the kernel at boot, it must reside +entirely within a 1 GB aligned physical memory window of up to 32 GB in +size that fully covers the kernel Image as well. + Any memory described to the kernel (even that below the start of the image) which is not marked as reserved from the kernel (e.g., with a memreserve region in the device tree) will be considered as available to diff --git a/Documentation/arm64/silicon-errata.txt b/Documentation/arm64/silicon-errata.txt index ba4b6acfc545..c6938e50e71f 100644 --- a/Documentation/arm64/silicon-errata.txt +++ b/Documentation/arm64/silicon-errata.txt @@ -53,7 +53,9 @@ stable kernels. | ARM | Cortex-A57 | #832075 | ARM64_ERRATUM_832075 | | ARM | Cortex-A57 | #852523 | N/A | | ARM | Cortex-A57 | #834220 | ARM64_ERRATUM_834220 | +| ARM | MMU-500 | #841119,#826419 | N/A | | | | | | | Cavium | ThunderX ITS | #22375, #24313 | CAVIUM_ERRATUM_22375 | | Cavium | ThunderX GICv3 | #23154 | CAVIUM_ERRATUM_23154 | | Cavium | ThunderX Core | #27456 | CAVIUM_ERRATUM_27456 | +| Cavium | ThunderX SMMUv2 | #27704 | N/A | diff --git a/Documentation/block/00-INDEX b/Documentation/block/00-INDEX index e840b47613f7..e55103ace382 100644 --- a/Documentation/block/00-INDEX +++ b/Documentation/block/00-INDEX @@ -2,6 +2,8 @@ - This file biodoc.txt - Notes on the Generic Block Layer Rewrite in Linux 2.5 +biovecs.txt + - Immutable biovecs and biovec iterators capability.txt - Generic Block Device Capability (/sys/block/<device>/capability) cfq-iosched.txt @@ -14,6 +16,8 @@ deadline-iosched.txt - Deadline IO scheduler tunables ioprio.txt - Block io priorities (in CFQ scheduler) +pr.txt + - Block layer support for Persistent Reservations null_blk.txt - Null block for block-layer benchmarking. queue-sysfs.txt diff --git a/Documentation/block/queue-sysfs.txt b/Documentation/block/queue-sysfs.txt index e5d914845be6..dce25d848d92 100644 --- a/Documentation/block/queue-sysfs.txt +++ b/Documentation/block/queue-sysfs.txt @@ -141,6 +141,15 @@ control of this block device to that new IO scheduler. Note that writing an IO scheduler name to this file will attempt to load that IO scheduler module, if it isn't already present in the system. +write_cache (RW) +---------------- +When read, this file will display whether the device has write back +caching enabled or not. It will return "write back" for the former +case, and "write through" for the latter. Writing to this file can +change the kernels view of the device, but it doesn't alter the +device state. This means that it might not be safe to toggle the +setting from "write back" to "write through", since that will also +eliminate cache flushes issued by the kernel. Jens Axboe <jens.axboe@oracle.com>, February 2009 diff --git a/Documentation/block/writeback_cache_control.txt b/Documentation/block/writeback_cache_control.txt index 83407d36630a..59e0516cbf6b 100644 --- a/Documentation/block/writeback_cache_control.txt +++ b/Documentation/block/writeback_cache_control.txt @@ -71,7 +71,7 @@ requests that have a payload. For devices with volatile write caches the driver needs to tell the block layer that it supports flushing caches by doing: - blk_queue_flush(sdkp->disk->queue, REQ_FLUSH); + blk_queue_write_cache(sdkp->disk->queue, true, false); and handle empty REQ_FLUSH requests in its prep_fn/request_fn. Note that REQ_FLUSH requests with a payload are automatically turned into a sequence @@ -79,7 +79,7 @@ of an empty REQ_FLUSH request followed by the actual write by the block layer. For devices that also support the FUA bit the block layer needs to be told to pass through the REQ_FUA bit using: - blk_queue_flush(sdkp->disk->queue, REQ_FLUSH | REQ_FUA); + blk_queue_write_cache(sdkp->disk->queue, true, true); and the driver must handle write requests that have the REQ_FUA bit set in prep_fn/request_fn. If the FUA bit is not natively supported the block diff --git a/Documentation/blockdev/zram.txt b/Documentation/blockdev/zram.txt index 5bda5031c83d..13100fb3c26d 100644 --- a/Documentation/blockdev/zram.txt +++ b/Documentation/blockdev/zram.txt @@ -59,27 +59,16 @@ num_devices parameter is optional and tells zram how many devices should be pre-created. Default: 1. 2) Set max number of compression streams - Compression backend may use up to max_comp_streams compression streams, - thus allowing up to max_comp_streams concurrent compression operations. - By default, compression backend uses single compression stream. - - Examples: - #show max compression streams number + Regardless the value passed to this attribute, ZRAM will always + allocate multiple compression streams - one per online CPUs - thus + allowing several concurrent compression operations. The number of + allocated compression streams goes down when some of the CPUs + become offline. There is no single-compression-stream mode anymore, + unless you are running a UP system or has only 1 CPU online. + + To find out how many streams are currently available: cat /sys/block/zram0/max_comp_streams - #set max compression streams number to 3 - echo 3 > /sys/block/zram0/max_comp_streams - -Note: -In order to enable compression backend's multi stream support max_comp_streams -must be initially set to desired concurrency level before ZRAM device -initialisation. Once the device initialised as a single stream compression -backend (max_comp_streams equals to 1), you will see error if you try to change -the value of max_comp_streams because single stream compression backend -implemented as a special case by lock overhead issue and does not support -dynamic max_comp_streams. Only multi stream backend supports dynamic -max_comp_streams adjustment. - 3) Select compression algorithm Using comp_algorithm device attribute one can see available and currently selected (shown in square brackets) compression algorithms, @@ -183,6 +172,7 @@ mem_limit RW the maximum amount of memory ZRAM can use to store pages_compacted RO the number of pages freed during compaction (available only via zram<id>/mm_stat node) compact WO trigger memory compaction +debug_stat RO this file is used for zram debugging purposes WARNING ======= diff --git a/Documentation/cgroup-v1/memory.txt b/Documentation/cgroup-v1/memory.txt index ff71e16cc752..b14abf217239 100644 --- a/Documentation/cgroup-v1/memory.txt +++ b/Documentation/cgroup-v1/memory.txt @@ -280,17 +280,9 @@ the amount of kernel memory used by the system. Kernel memory is fundamentally different than user memory, since it can't be swapped out, which makes it possible to DoS the system by consuming too much of this precious resource. -Kernel memory won't be accounted at all until limit on a group is set. This -allows for existing setups to continue working without disruption. The limit -cannot be set if the cgroup have children, or if there are already tasks in the -cgroup. Attempting to set the limit under those conditions will return -EBUSY. -When use_hierarchy == 1 and a group is accounted, its children will -automatically be accounted regardless of their limit value. - -After a group is first limited, it will be kept being accounted until it -is removed. The memory limitation itself, can of course be removed by writing --1 to memory.kmem.limit_in_bytes. In this case, kmem will be accounted, but not -limited. +Kernel memory accounting is enabled for all memory cgroups by default. But +it can be disabled system-wide by passing cgroup.memory=nokmem to the kernel +at boot time. In this case, kernel memory will not be accounted at all. Kernel memory limits are not imposed for the root cgroup. Usage for the root cgroup may or may not be accounted. The memory used is accumulated into diff --git a/Documentation/connector/.gitignore b/Documentation/connector/.gitignore deleted file mode 100644 index d2b9c32accd4..000000000000 --- a/Documentation/connector/.gitignore +++ /dev/null @@ -1 +0,0 @@ -ucon diff --git a/Documentation/connector/Makefile b/Documentation/connector/Makefile deleted file mode 100644 index d98e4df98e24..000000000000 --- a/Documentation/connector/Makefile +++ /dev/null @@ -1,16 +0,0 @@ -ifneq ($(CONFIG_CONNECTOR),) -obj-m += cn_test.o -endif - -# List of programs to build -hostprogs-y := ucon - -# Tell kbuild to always build the programs -always := $(hostprogs-y) - -HOSTCFLAGS_ucon.o += -I$(objtree)/usr/include - -all: modules - -modules clean: - $(MAKE) -C ../.. SUBDIRS=$(PWD) $@ diff --git a/Documentation/connector/cn_test.c b/Documentation/connector/cn_test.c deleted file mode 100644 index d12cc944b696..000000000000 --- a/Documentation/connector/cn_test.c +++ /dev/null @@ -1,201 +0,0 @@ -/* - * cn_test.c - * - * 2004+ Copyright (c) Evgeniy Polyakov <zbr@ioremap.net> - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define pr_fmt(fmt) "cn_test: " fmt - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/skbuff.h> -#include <linux/slab.h> -#include <linux/timer.h> - -#include <linux/connector.h> - -static struct cb_id cn_test_id = { CN_NETLINK_USERS + 3, 0x456 }; -static char cn_test_name[] = "cn_test"; -static struct sock *nls; -static struct timer_list cn_test_timer; - -static void cn_test_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp) -{ - pr_info("%s: %lu: idx=%x, val=%x, seq=%u, ack=%u, len=%d: %s.\n", - __func__, jiffies, msg->id.idx, msg->id.val, - msg->seq, msg->ack, msg->len, - msg->len ? (char *)msg->data : ""); -} - -/* - * Do not remove this function even if no one is using it as - * this is an example of how to get notifications about new - * connector user registration - */ -#if 0 -static int cn_test_want_notify(void) -{ - struct cn_ctl_msg *ctl; - struct cn_notify_req *req; - struct cn_msg *msg = NULL; - int size, size0; - struct sk_buff *skb; - struct nlmsghdr *nlh; - u32 group = 1; - - size0 = sizeof(*msg) + sizeof(*ctl) + 3 * sizeof(*req); - - size = NLMSG_SPACE(size0); - - skb = alloc_skb(size, GFP_ATOMIC); - if (!skb) { - pr_err("failed to allocate new skb with size=%u\n", size); - return -ENOMEM; - } - - nlh = nlmsg_put(skb, 0, 0x123, NLMSG_DONE, size - sizeof(*nlh), 0); - if (!nlh) { - kfree_skb(skb); - return -EMSGSIZE; - } - - msg = nlmsg_data(nlh); - - memset(msg, 0, size0); - - msg->id.idx = -1; - msg->id.val = -1; - msg->seq = 0x123; - msg->ack = 0x345; - msg->len = size0 - sizeof(*msg); - - ctl = (struct cn_ctl_msg *)(msg + 1); - - ctl->idx_notify_num = 1; - ctl->val_notify_num = 2; - ctl->group = group; - ctl->len = msg->len - sizeof(*ctl); - - req = (struct cn_notify_req *)(ctl + 1); - - /* - * Idx. - */ - req->first = cn_test_id.idx; - req->range = 10; - - /* - * Val 0. - */ - req++; - req->first = cn_test_id.val; - req->range = 10; - - /* - * Val 1. - */ - req++; - req->first = cn_test_id.val + 20; - req->range = 10; - - NETLINK_CB(skb).dst_group = ctl->group; - //netlink_broadcast(nls, skb, 0, ctl->group, GFP_ATOMIC); - netlink_unicast(nls, skb, 0, 0); - - pr_info("request was sent: group=0x%x\n", ctl->group); - - return 0; -} -#endif - -static u32 cn_test_timer_counter; -static void cn_test_timer_func(unsigned long __data) -{ - struct cn_msg *m; - char data[32]; - - pr_debug("%s: timer fired with data %lu\n", __func__, __data); - - m = kzalloc(sizeof(*m) + sizeof(data), GFP_ATOMIC); - if (m) { - - memcpy(&m->id, &cn_test_id, sizeof(m->id)); - m->seq = cn_test_timer_counter; - m->len = sizeof(data); - - m->len = - scnprintf(data, sizeof(data), "counter = %u", - cn_test_timer_counter) + 1; - - memcpy(m + 1, data, m->len); - - cn_netlink_send(m, 0, 0, GFP_ATOMIC); - kfree(m); - } - - cn_test_timer_counter++; - - mod_timer(&cn_test_timer, jiffies + msecs_to_jiffies(1000)); -} - -static int cn_test_init(void) -{ - int err; - - err = cn_add_callback(&cn_test_id, cn_test_name, cn_test_callback); - if (err) - goto err_out; - cn_test_id.val++; - err = cn_add_callback(&cn_test_id, cn_test_name, cn_test_callback); - if (err) { - cn_del_callback(&cn_test_id); - goto err_out; - } - - setup_timer(&cn_test_timer, cn_test_timer_func, 0); - mod_timer(&cn_test_timer, jiffies + msecs_to_jiffies(1000)); - - pr_info("initialized with id={%u.%u}\n", - cn_test_id.idx, cn_test_id.val); - - return 0; - - err_out: - if (nls && nls->sk_socket) - sock_release(nls->sk_socket); - - return err; -} - -static void cn_test_fini(void) -{ - del_timer_sync(&cn_test_timer); - cn_del_callback(&cn_test_id); - cn_test_id.val--; - cn_del_callback(&cn_test_id); - if (nls && nls->sk_socket) - sock_release(nls->sk_socket); -} - -module_init(cn_test_init); -module_exit(cn_test_fini); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>"); -MODULE_DESCRIPTION("Connector's test module"); diff --git a/Documentation/connector/connector.txt b/Documentation/connector/connector.txt index f6215f95149b..ab7ca897fab7 100644 --- a/Documentation/connector/connector.txt +++ b/Documentation/connector/connector.txt @@ -186,3 +186,11 @@ only cn_test.c test module used it. Some work in netlink area is still being done, so things can be changed in 2.6.15 timeframe, if it will happen, documentation will be updated for that kernel. + +/*****************************************/ +Code samples +/*****************************************/ + +Sample code for a connector test module and user space can be found +in samples/connector/. To build this code, enable CONFIG_CONNECTOR +and CONFIG_SAMPLES. diff --git a/Documentation/connector/ucon.c b/Documentation/connector/ucon.c deleted file mode 100644 index 8a4da64e02a8..000000000000 --- a/Documentation/connector/ucon.c +++ /dev/null @@ -1,250 +0,0 @@ -/* - * ucon.c - * - * Copyright (c) 2004+ Evgeniy Polyakov <zbr@ioremap.net> - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <asm/types.h> - -#include <sys/types.h> -#include <sys/socket.h> -#include <sys/poll.h> - -#include <linux/netlink.h> -#include <linux/rtnetlink.h> - -#include <arpa/inet.h> - -#include <stdbool.h> -#include <stdio.h> -#include <stdlib.h> -#include <unistd.h> -#include <string.h> -#include <errno.h> -#include <time.h> -#include <getopt.h> - -#include <linux/connector.h> - -#define DEBUG -#define NETLINK_CONNECTOR 11 - -/* Hopefully your userspace connector.h matches this kernel */ -#define CN_TEST_IDX CN_NETLINK_USERS + 3 -#define CN_TEST_VAL 0x456 - -#ifdef DEBUG -#define ulog(f, a...) fprintf(stdout, f, ##a) -#else -#define ulog(f, a...) do {} while (0) -#endif - -static int need_exit; -static __u32 seq; - -static int netlink_send(int s, struct cn_msg *msg) -{ - struct nlmsghdr *nlh; - unsigned int size; - int err; - char buf[128]; - struct cn_msg *m; - - size = NLMSG_SPACE(sizeof(struct cn_msg) + msg->len); - - nlh = (struct nlmsghdr *)buf; - nlh->nlmsg_seq = seq++; - nlh->nlmsg_pid = getpid(); - nlh->nlmsg_type = NLMSG_DONE; - nlh->nlmsg_len = size; - nlh->nlmsg_flags = 0; - - m = NLMSG_DATA(nlh); -#if 0 - ulog("%s: [%08x.%08x] len=%u, seq=%u, ack=%u.\n", - __func__, msg->id.idx, msg->id.val, msg->len, msg->seq, msg->ack); -#endif - memcpy(m, msg, sizeof(*m) + msg->len); - - err = send(s, nlh, size, 0); - if (err == -1) - ulog("Failed to send: %s [%d].\n", - strerror(errno), errno); - - return err; -} - -static void usage(void) -{ - printf( - "Usage: ucon [options] [output file]\n" - "\n" - "\t-h\tthis help screen\n" - "\t-s\tsend buffers to the test module\n" - "\n" - "The default behavior of ucon is to subscribe to the test module\n" - "and wait for state messages. Any ones received are dumped to the\n" - "specified output file (or stdout). The test module is assumed to\n" - "have an id of {%u.%u}\n" - "\n" - "If you get no output, then verify the cn_test module id matches\n" - "the expected id above.\n" - , CN_TEST_IDX, CN_TEST_VAL - ); -} - -int main(int argc, char *argv[]) -{ - int s; - char buf[1024]; - int len; - struct nlmsghdr *reply; - struct sockaddr_nl l_local; - struct cn_msg *data; - FILE *out; - time_t tm; - struct pollfd pfd; - bool send_msgs = false; - - while ((s = getopt(argc, argv, "hs")) != -1) { - switch (s) { - case 's': - send_msgs = true; - break; - - case 'h': - usage(); - return 0; - - default: - /* getopt() outputs an error for us */ - usage(); - return 1; - } - } - - if (argc != optind) { - out = fopen(argv[optind], "a+"); - if (!out) { - ulog("Unable to open %s for writing: %s\n", - argv[1], strerror(errno)); - out = stdout; - } - } else - out = stdout; - - memset(buf, 0, sizeof(buf)); - - s = socket(PF_NETLINK, SOCK_DGRAM, NETLINK_CONNECTOR); - if (s == -1) { - perror("socket"); - return -1; - } - - l_local.nl_family = AF_NETLINK; - l_local.nl_groups = -1; /* bitmask of requested groups */ - l_local.nl_pid = 0; - - ulog("subscribing to %u.%u\n", CN_TEST_IDX, CN_TEST_VAL); - - if (bind(s, (struct sockaddr *)&l_local, sizeof(struct sockaddr_nl)) == -1) { - perror("bind"); - close(s); - return -1; - } - -#if 0 - { - int on = 0x57; /* Additional group number */ - setsockopt(s, SOL_NETLINK, NETLINK_ADD_MEMBERSHIP, &on, sizeof(on)); - } -#endif - if (send_msgs) { - int i, j; - - memset(buf, 0, sizeof(buf)); - - data = (struct cn_msg *)buf; - - data->id.idx = CN_TEST_IDX; - data->id.val = CN_TEST_VAL; - data->seq = seq++; - data->ack = 0; - data->len = 0; - - for (j=0; j<10; ++j) { - for (i=0; i<1000; ++i) { - len = netlink_send(s, data); - } - - ulog("%d messages have been sent to %08x.%08x.\n", i, data->id.idx, data->id.val); - } - - return 0; - } - - - pfd.fd = s; - - while (!need_exit) { - pfd.events = POLLIN; - pfd.revents = 0; - switch (poll(&pfd, 1, -1)) { - case 0: - need_exit = 1; - break; - case -1: - if (errno != EINTR) { - need_exit = 1; - break; - } - continue; - } - if (need_exit) - break; - - memset(buf, 0, sizeof(buf)); - len = recv(s, buf, sizeof(buf), 0); - if (len == -1) { - perror("recv buf"); - close(s); - return -1; - } - reply = (struct nlmsghdr *)buf; - - switch (reply->nlmsg_type) { - case NLMSG_ERROR: - fprintf(out, "Error message received.\n"); - fflush(out); - break; - case NLMSG_DONE: - data = (struct cn_msg *)NLMSG_DATA(reply); - - time(&tm); - fprintf(out, "%.24s : [%x.%x] [%08u.%08u].\n", - ctime(&tm), data->id.idx, data->id.val, data->seq, data->ack); - fflush(out); - break; - default: - break; - } - } - - close(s); - return 0; -} diff --git a/Documentation/device-mapper/cache-policies.txt b/Documentation/device-mapper/cache-policies.txt index e5062ad18717..d3ca8af21a31 100644 --- a/Documentation/device-mapper/cache-policies.txt +++ b/Documentation/device-mapper/cache-policies.txt @@ -11,7 +11,7 @@ Every bio that is mapped by the target is referred to the policy. The policy can return a simple HIT or MISS or issue a migration. Currently there's no way for the policy to issue background work, -e.g. to start writing back dirty blocks that are going to be evicte +e.g. to start writing back dirty blocks that are going to be evicted soon. Because we map bios, rather than requests it's easy for the policy @@ -48,7 +48,7 @@ with the multiqueue (mq) policy. The smq policy (vs mq) offers the promise of less memory utilization, improved performance and increased adaptability in the face of changing -workloads. SMQ also does not have any cumbersome tuning knobs. +workloads. smq also does not have any cumbersome tuning knobs. Users may switch from "mq" to "smq" simply by appropriately reloading a DM table that is using the cache target. Doing so will cause all of the @@ -57,47 +57,45 @@ degrade slightly until smq recalculates the origin device's hotspots that should be cached. Memory usage: -The mq policy uses a lot of memory; 88 bytes per cache block on a 64 +The mq policy used a lot of memory; 88 bytes per cache block on a 64 bit machine. -SMQ uses 28bit indexes to implement it's data structures rather than +smq uses 28bit indexes to implement it's data structures rather than pointers. It avoids storing an explicit hit count for each block. It -has a 'hotspot' queue rather than a pre cache which uses a quarter of +has a 'hotspot' queue, rather than a pre-cache, which uses a quarter of the entries (each hotspot block covers a larger area than a single cache block). -All these mean smq uses ~25bytes per cache block. Still a lot of +All this means smq uses ~25bytes per cache block. Still a lot of memory, but a substantial improvement nontheless. Level balancing: -MQ places entries in different levels of the multiqueue structures -based on their hit count (~ln(hit count)). This means the bottom -levels generally have the most entries, and the top ones have very -few. Having unbalanced levels like this reduces the efficacy of the +mq placed entries in different levels of the multiqueue structures +based on their hit count (~ln(hit count)). This meant the bottom +levels generally had the most entries, and the top ones had very +few. Having unbalanced levels like this reduced the efficacy of the multiqueue. -SMQ does not maintain a hit count, instead it swaps hit entries with -the least recently used entry from the level above. The over all +smq does not maintain a hit count, instead it swaps hit entries with +the least recently used entry from the level above. The overall ordering being a side effect of this stochastic process. With this scheme we can decide how many entries occupy each multiqueue level, resulting in better promotion/demotion decisions. Adaptability: -The MQ policy maintains a hit count for each cache block. For a +The mq policy maintained a hit count for each cache block. For a different block to get promoted to the cache it's hit count has to -exceed the lowest currently in the cache. This means it can take a +exceed the lowest currently in the cache. This meant it could take a long time for the cache to adapt between varying IO patterns. -Periodically degrading the hit counts could help with this, but I -haven't found a nice general solution. -SMQ doesn't maintain hit counts, so a lot of this problem just goes +smq doesn't maintain hit counts, so a lot of this problem just goes away. In addition it tracks performance of the hotspot queue, which is used to decide which blocks to promote. If the hotspot queue is performing badly then it starts moving entries more quickly between levels. This lets it adapt to new IO patterns very quickly. Performance: -Testing SMQ shows substantially better performance than MQ. +Testing smq shows substantially better performance than mq. cleaner ------- diff --git a/Documentation/device-mapper/statistics.txt b/Documentation/device-mapper/statistics.txt index 6f5ef944ca4c..170ac02a1f50 100644 --- a/Documentation/device-mapper/statistics.txt +++ b/Documentation/device-mapper/statistics.txt @@ -205,7 +205,7 @@ statistics on them: dmsetup message vol 0 @stats_create - /100 -Set the auxillary data string to "foo bar baz" (the escape for each +Set the auxiliary data string to "foo bar baz" (the escape for each space must also be escaped, otherwise the shell will consume them): dmsetup message vol 0 @stats_set_aux 0 foo\\ bar\\ baz diff --git a/Documentation/devices.txt b/Documentation/devices.txt index 87b4c5e82d39..4035eca87144 100644 --- a/Documentation/devices.txt +++ b/Documentation/devices.txt @@ -1,20 +1,17 @@ - LINUX ALLOCATED DEVICES (2.6+ version) - - Maintained by Alan Cox <device@lanana.org> - - Last revised: 6th April 2009 + LINUX ALLOCATED DEVICES (4.x+ version) This list is the Linux Device List, the official registry of allocated device numbers and /dev directory nodes for the Linux operating system. -The latest version of this list is available from -http://www.lanana.org/docs/device-list/ or -ftp://ftp.kernel.org/pub/linux/docs/device-list/. This version may be -newer than the one distributed with the Linux kernel. - -The LaTeX version of this document is no longer maintained. +The LaTeX version of this document is no longer maintained, nor is +the document that used to reside at lanana.org. This version in the +mainline Linux kernel is the master document. Updates shall be sent +as patches to the kernel maintainers (see the SubmittingPatches document). +Specifically explore the sections titled "CHAR and MISC DRIVERS", and +"BLOCK LAYER" in the MAINTAINERS file to find the right maintainers +to involve for character and block devices. This document is included by reference into the Filesystem Hierarchy Standard (FHS). The FHS is available from http://www.pathname.com/fhs/. @@ -23,60 +20,33 @@ Allocations marked (68k/Amiga) apply to Linux/68k on the Amiga platform only. Allocations marked (68k/Atari) apply to Linux/68k on the Atari platform only. -The symbol {2.6} means the allocation is obsolete and scheduled for -removal once kernel version 2.6 (or equivalent) is released. Some of these -allocations have already been removed. - -This document is in the public domain. The author requests, however, +This document is in the public domain. The authors requests, however, that semantically altered versions are not distributed without -permission of the author, assuming the author can be contacted without +permission of the authors, assuming the authors can be contacted without an unreasonable effort. -In particular, please don't sent patches for this list to Linus, at -least not without contacting me first. - -I do not have any information about these devices beyond what appears -on this list. Any such information requests will be deleted without -reply. - **** DEVICE DRIVERS AUTHORS PLEASE READ THIS **** -To have a major number allocated, or a minor number in situations -where that applies (e.g. busmice), please contact me with the -appropriate device information. Also, if you have additional -information regarding any of the devices listed below, or if I have -made a mistake, I would greatly appreciate a note. - -I do, however, make a few requests about the nature of your report. -This is necessary for me to be able to keep this list up to date and -correct in a timely manner. First of all, *please* send it to the -correct address... <device@lanana.org>. I receive hundreds of email -messages a day, so mail sent to other addresses may very well get lost -in the avalanche. Please put in a descriptive subject, so I can find -your mail again should I need to. Too many people send me email -saying just "device number request" in the subject. - -Second, please include a description of the device *in the same format -as this list*. The reason for this is that it is the only way I have -found to ensure I have all the requisite information to publish your -device and avoid conflicts. +Linux now has extensive support for dynamic allocation of device numbering +and can use sysfs and udev (systemd) to handle the naming needs. There are +still some exceptions in the serial and boot device area. Before asking +for a device number make sure you actually need one. -Third, please don't assume that the distributed version of the list is -up to date. Due to the number of registrations I have to maintain it -in "batch mode", so there is likely additional registrations that -haven't been listed yet. +To have a major number allocated, or a minor number in situations +where that applies (e.g. busmice), please submit a patch and send to +the authors as indicated above. -Fourth, remember that Linux now has extensive support for dynamic allocation -of device numbering and can use sysfs and udev to handle the naming needs. -There are still some exceptions in the serial and boot device area. Before -asking for a device number make sure you actually need one. +Keep the description of the device *in the same format +as this list*. The reason for this is that it is the only way we have +found to ensure we have all the requisite information to publish your +device and avoid conflicts. -Finally, sometimes I have to play "namespace police." Please don't be -offended. I often get submissions for /dev names that would be bound -to cause conflicts down the road. I am trying to avoid getting in a +Finally, sometimes we have to play "namespace police." Please don't be +offended. We often get submissions for /dev names that would be bound +to cause conflicts down the road. We are trying to avoid getting in a situation where we would have to suffer an incompatible forward -change. Therefore, please consult with me *before* you make your +change. Therefore, please consult with us *before* you make your device names and numbers in any way public, at least to the point where it would be at all difficult to get them changed. @@ -3099,9 +3069,9 @@ Your cooperation is appreciated. 129 = /dev/ipath_sma Device used by Subnet Management Agent 130 = /dev/ipath_diag Device used by diagnostics programs -234-239 UNASSIGNED - -240-254 char LOCAL/EXPERIMENTAL USE +234-254 char RESERVED FOR DYNAMIC ASSIGNMENT + Character devices that request a dynamic allocation of major number will + take numbers starting from 254 and downward. 240-254 block LOCAL/EXPERIMENTAL USE Allocated for local/experimental use. For devices not diff --git a/Documentation/devicetree/bindings/arc/eznps.txt b/Documentation/devicetree/bindings/arc/eznps.txt new file mode 100644 index 000000000000..1aa50c640678 --- /dev/null +++ b/Documentation/devicetree/bindings/arc/eznps.txt @@ -0,0 +1,7 @@ +EZchip NPS Network Processor Platforms Device Tree Bindings +--------------------------------------------------------------------------- + +Appliance main board with NPS400 ASIC. + +Required root node properties: + - compatible = "ezchip,arc-nps"; diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt index 885f93d14ef9..5a6b16070a33 100644 --- a/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt +++ b/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt @@ -3,6 +3,7 @@ This driver uses the EDAC framework to implement the SOCFPGA ECC Manager. The ECC Manager counts and corrects single bit errors and counts/handles double bit errors which are uncorrectable. +Cyclone5 and Arria5 ECC Manager Required Properties: - compatible : Should be "altr,socfpga-ecc-manager" - #address-cells: must be 1 @@ -47,3 +48,52 @@ Example: interrupts = <0 178 1>, <0 179 1>; }; }; + +Arria10 SoCFPGA ECC Manager +The Arria10 SoC ECC Manager handles the IRQs for each peripheral +in a shared register instead of individual IRQs like the Cyclone5 +and Arria5. Therefore the device tree is different as well. + +Required Properties: +- compatible : Should be "altr,socfpga-a10-ecc-manager" +- altr,sysgr-syscon : phandle to Arria10 System Manager Block + containing the ECC manager registers. +- #address-cells: must be 1 +- #size-cells: must be 1 +- interrupts : Should be single bit error interrupt, then double bit error + interrupt. Note the rising edge type. +- ranges : standard definition, should translate from local addresses + +Subcomponents: + +L2 Cache ECC +Required Properties: +- compatible : Should be "altr,socfpga-a10-l2-ecc" +- reg : Address and size for ECC error interrupt clear registers. + +On-Chip RAM ECC +Required Properties: +- compatible : Should be "altr,socfpga-a10-ocram-ecc" +- reg : Address and size for ECC block registers. + +Example: + + eccmgr: eccmgr@ffd06000 { + compatible = "altr,socfpga-a10-ecc-manager"; + altr,sysmgr-syscon = <&sysmgr>; + #address-cells = <1>; + #size-cells = <1>; + interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>, + <0 0 IRQ_TYPE_LEVEL_HIGH>; + ranges; + + l2-ecc@ffd06010 { + compatible = "altr,socfpga-a10-l2-ecc"; + reg = <0xffd06010 0x4>; + }; + + ocram-ecc@ff8c3000 { + compatible = "altr,socfpga-a10-ocram-ecc"; + reg = <0xff8c3000 0x90>; + }; + }; diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt index 8a5122ab19b0..fcc6f6c10803 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.txt +++ b/Documentation/devicetree/bindings/arm/amlogic.txt @@ -25,3 +25,6 @@ Board compatible values: - "tronsmart,vega-s95-pro", "tronsmart,vega-s95" (Meson gxbb) - "tronsmart,vega-s95-meta", "tronsmart,vega-s95" (Meson gxbb) - "tronsmart,vega-s95-telos", "tronsmart,vega-s95" (Meson gxbb) + - "hardkernel,odroid-c2" (Meson gxbb) + - "amlogic,p200" (Meson gxbb) + - "amlogic,p201" (Meson gxbb) diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards index 0226bc2cc1f6..ab318a56fca2 100644 --- a/Documentation/devicetree/bindings/arm/arm-boards +++ b/Documentation/devicetree/bindings/arm/arm-boards @@ -93,6 +93,14 @@ Required nodes: a core-module with regs and the compatible strings "arm,core-module-versatile", "syscon" +Optional nodes: + +- arm,versatile-ib2-syscon : if the Versatile has an IB2 interface + board mounted, this has a separate system controller that is + defined in this node. + Required properties: + compatible = "arm,versatile-ib2-syscon", "syscon" + ARM RealView Boards ------------------- The RealView boards cover tailored evaluation boards that are used to explore diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt index 7fd64ec9ee1d..e1f5ad855f14 100644 --- a/Documentation/devicetree/bindings/arm/atmel-at91.txt +++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt @@ -41,6 +41,10 @@ compatible: must be one of: - "atmel,sama5d43" - "atmel,sama5d44" +Chipid required properties: +- compatible: Should be "atmel,sama5d2-chipid" +- reg : Should contain registers location and length + PIT Timer required properties: - compatible: Should be "atmel,at91sam9260-pit" - reg: Should contain registers location and length @@ -147,6 +151,65 @@ Example: clocks = <&clk32k>; }; +SHDWC SAMA5D2-Compatible Shutdown Controller + +1) shdwc node + +required properties: +- compatible: should be "atmel,sama5d2-shdwc". +- reg: should contain registers location and length +- clocks: phandle to input clock. +- #address-cells: should be one. The cell is the wake-up input index. +- #size-cells: should be zero. + +optional properties: + +- debounce-delay-us: minimum wake-up inputs debouncer period in + microseconds. It's usually a board-related property. +- atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up. + +The node contains child nodes for each wake-up input that the platform uses. + +2) input nodes + +Wake-up input nodes are usually described in the "board" part of the Device +Tree. Note also that input 0 is linked to the wake-up pin and is frequently +used. + +Required properties: +- reg: should contain the wake-up input index [0 - 15]. + +Optional properties: +- atmel,wakeup-active-high: boolean, the corresponding wake-up input described + by the child, forces the wake-up of the core power supply on a high level. + The default is to be active low. + +Example: + +On the SoC side: + shdwc@f8048010 { + compatible = "atmel,sama5d2-shdwc"; + reg = <0xf8048010 0x10>; + clocks = <&clk32k>; + #address-cells = <1>; + #size-cells = <0>; + atmel,wakeup-rtc-timer; + }; + +On the board side: + shdwc@f8048010 { + debounce-delay-us = <976>; + + input@0 { + reg = <0>; + }; + + input@1 { + reg = <1>; + atmel,wakeup-active-high; + }; + }; + Special Function Registers (SFR) Special Function Registers (SFR) manage specific aspects of the integrated @@ -155,7 +218,7 @@ elsewhere. required properties: - compatible: Should be "atmel,<chip>-sfr", "syscon". - <chip> can be "sama5d3" or "sama5d4". + <chip> can be "sama5d3", "sama5d4" or "sama5d2". - reg: Should contain registers location and length sfr@f0038000 { diff --git a/Documentation/devicetree/bindings/arm/cci.txt b/Documentation/devicetree/bindings/arm/cci.txt index a1a5a7ecc2fb..0f2153e8fa7e 100644 --- a/Documentation/devicetree/bindings/arm/cci.txt +++ b/Documentation/devicetree/bindings/arm/cci.txt @@ -100,7 +100,7 @@ specific to ARM. "arm,cci-400-pmu,r0" "arm,cci-400-pmu,r1" "arm,cci-400-pmu" - DEPRECATED, permitted only where OS has - secure acces to CCI registers + secure access to CCI registers "arm,cci-500-pmu,r0" "arm,cci-550-pmu,r0" - reg: diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt index 62938eb9697f..93147c0c8a0e 100644 --- a/Documentation/devicetree/bindings/arm/coresight.txt +++ b/Documentation/devicetree/bindings/arm/coresight.txt @@ -19,6 +19,7 @@ its hardware characteristcs. - "arm,coresight-etm3x", "arm,primecell"; - "arm,coresight-etm4x", "arm,primecell"; - "qcom,coresight-replicator1x", "arm,primecell"; + - "arm,coresight-stm", "arm,primecell"; [1] * reg: physical base address and length of the register set(s) of the component. @@ -36,6 +37,14 @@ its hardware characteristcs. layout using the generic DT graph presentation found in "bindings/graph.txt". +* Additional required properties for System Trace Macrocells (STM): + * reg: along with the physical base address and length of the register + set as described above, another entry is required to describe the + mapping of the extended stimulus port area. + + * reg-names: the only acceptable values are "stm-base" and + "stm-stimulus-base", each corresponding to the areas defined in "reg". + * Required properties for devices that don't show up on the AMBA bus, such as non-configurable replicators: @@ -202,3 +211,22 @@ Example: }; }; }; + +4. STM + stm@20100000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0 0x20100000 0 0x1000>, + <0 0x28000000 0 0x180000>; + reg-names = "stm-base", "stm-stimulus-base"; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + port { + stm_out_port: endpoint { + remote-endpoint = <&main_funnel_in_port2>; + }; + }; + }; + +[1]. There is currently two version of STM: STM32 and STM500. Both +have the same HW interface and as such don't need an explicit binding name. diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt index 752a685d926f..dbbc0952021c 100644 --- a/Documentation/devicetree/bindings/arm/fsl.txt +++ b/Documentation/devicetree/bindings/arm/fsl.txt @@ -135,6 +135,10 @@ LS1043A ARMv8 based RDB Board Required root node properties: - compatible = "fsl,ls1043a-rdb", "fsl,ls1043a"; +LS1043A ARMv8 based QDS Board +Required root node properties: + - compatible = "fsl,ls1043a-qds", "fsl,ls1043a"; + LS2080A ARMv8 based Simulator model Required root node properties: - compatible = "fsl,ls2080a-simu", "fsl,ls2080a"; diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt index e3ccab114006..83fe816ae050 100644 --- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt @@ -1,29 +1,33 @@ Hisilicon Platforms Device Tree Bindings ---------------------------------------------------- -Hi6220 SoC -Required root node properties: - - compatible = "hisilicon,hi6220"; - Hi4511 Board Required root node properties: - compatible = "hisilicon,hi3620-hi4511"; -HiP04 D01 Board +Hi6220 SoC Required root node properties: - - compatible = "hisilicon,hip04-d01"; + - compatible = "hisilicon,hi6220"; + +HiKey Board +Required root node properties: + - compatible = "hisilicon,hi6220-hikey", "hisilicon,hi6220"; HiP01 ca9x2 Board Required root node properties: - compatible = "hisilicon,hip01-ca9x2"; -HiKey Board +HiP04 D01 Board Required root node properties: - - compatible = "hisilicon,hi6220-hikey", "hisilicon,hi6220"; + - compatible = "hisilicon,hip04-d01"; HiP05 D02 Board Required root node properties: - compatible = "hisilicon,hip05-d02"; +HiP06 D03 Board +Required root node properties: + - compatible = "hisilicon,hip06-d03"; + Hisilicon system controller Required properties: diff --git a/Documentation/devicetree/bindings/arm/l2c2x0.txt b/Documentation/devicetree/bindings/arm/l2c2x0.txt index fe0398c5c77b..c453ab5553cd 100644 --- a/Documentation/devicetree/bindings/arm/l2c2x0.txt +++ b/Documentation/devicetree/bindings/arm/l2c2x0.txt @@ -84,6 +84,12 @@ Optional properties: - prefetch-instr : Instruction prefetch. Value: <0> (forcibly disable), <1> (forcibly enable), property absent (retain settings set by firmware) +- arm,dynamic-clock-gating : L2 dynamic clock gating. Value: <0> (forcibly + disable), <1> (forcibly enable), property absent (OS specific behavior, + preferrably retain firmware settings) +- arm,standby-mode: L2 standby mode enable. Value <0> (forcibly disable), + <1> (forcibly enable), property absent (OS specific behavior, + preferrably retain firmware settings) Example: diff --git a/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt new file mode 100644 index 000000000000..8968371d84e2 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt @@ -0,0 +1,35 @@ +Marvell Armada AP806 System Controller +====================================== + +The AP806 is one of the two core HW blocks of the Marvell Armada 7K/8K +SoCs. It contains a system controller, which provides a number +registers giving access to numerous features: clocks, pin-muxing and +many other SoC configuration items. This DT binding allows to describe +this system controller. + +The Device Tree node representing the AP806 system controller provides +a number of clocks: + + - 0: clock of CPU cluster 0 + - 1: clock of CPU cluster 1 + - 2: fixed PLL at 1200 Mhz + - 3: MSS clock, derived from the fixed PLL + +Required properties: + + - compatible: must be: + "marvell,ap806-system-controller", "syscon" + - reg: register area of the AP806 system controller + - #clock-cells: must be set to 1 + - clock-output-names: must be defined to: + "ap-cpu-cluster-0", "ap-cpu-cluster-1", "ap-fixed", "ap-mss" + +Example: + + syscon: system-controller@6f4000 { + compatible = "marvell,ap806-system-controller", "syscon"; + #clock-cells = <1>; + clock-output-names = "ap-cpu-cluster-0", "ap-cpu-cluster-1", + "ap-fixed", "ap-mss"; + reg = <0x6f4000 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt new file mode 100644 index 000000000000..30c546900b60 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt @@ -0,0 +1,83 @@ +Marvell Armada CP110 System Controller 0 +======================================== + +The CP110 is one of the two core HW blocks of the Marvell Armada 7K/8K +SoCs. It contains two sets of system control registers, System +Controller 0 and System Controller 1. This Device Tree binding allows +to describe the first system controller, which provides registers to +configure various aspects of the SoC. + +The Device Tree node representing this System Controller 0 provides a +number of clocks: + + - a set of core clocks + - a set of gatable clocks + +Those clocks can be referenced by other Device Tree nodes using two +cells: + - The first cell must be 0 or 1. 0 for the core clocks and 1 for the + gatable clocks. + - The second cell identifies the particular core clock or gatable + clocks. + +The following clocks are available: + - Core clocks + - 0 0 APLL + - 0 1 PPv2 core + - 0 2 EIP + - 0 3 Core + - 0 4 NAND core + - Gatable clocks + - 1 0 Audio + - 1 1 Comm Unit + - 1 2 NAND + - 1 3 PPv2 + - 1 4 SDIO + - 1 5 MG Domain + - 1 6 MG Core + - 1 7 XOR1 + - 1 8 XOR0 + - 1 9 GOP DP + - 1 11 PCIe x1 0 + - 1 12 PCIe x1 1 + - 1 13 PCIe x4 + - 1 14 PCIe / XOR + - 1 15 SATA + - 1 16 SATA USB + - 1 17 Main + - 1 18 SD/MMC + - 1 21 Slow IO (SPI, NOR, BootROM, I2C, UART) + - 1 22 USB3H0 + - 1 23 USB3H1 + - 1 24 USB3 Device + - 1 25 EIP150 + - 1 26 EIP197 + +Required properties: + + - compatible: must be: + "marvell,cp110-system-controller0", "syscon"; + - reg: register area of the CP110 system controller 0 + - #clock-cells: must be set to 2 + - core-clock-output-names must be set to: + "cpm-apll", "cpm-ppv2-core", "cpm-eip", "cpm-core", "cpm-nand-core" + - gate-clock-output-names must be set to: + "cpm-audio", "cpm-communit", "cpm-nand", "cpm-ppv2", "cpm-sdio", + "cpm-mg-domain", "cpm-mg-core", "cpm-xor1", "cpm-xor0", "cpm-gop-dp", "none", + "cpm-pcie_x10", "cpm-pcie_x11", "cpm-pcie_x4", "cpm-pcie-xor", "cpm-sata", + "cpm-sata-usb", "cpm-main", "cpm-sd-mmc", "none", "none", "cpm-slow-io", + "cpm-usb3h0", "cpm-usb3h1", "cpm-usb3dev", "cpm-eip150", "cpm-eip197"; + +Example: + + cpm_syscon0: system-controller@440000 { + compatible = "marvell,cp110-system-controller0", "syscon"; + reg = <0x440000 0x1000>; + #clock-cells = <2>; + core-clock-output-names = "cpm-apll", "cpm-ppv2-core", "cpm-eip", "cpm-core", "cpm-nand-core"; + gate-clock-output-names = "cpm-audio", "cpm-communit", "cpm-nand", "cpm-ppv2", "cpm-sdio", + "cpm-mg-domain", "cpm-mg-core", "cpm-xor1", "cpm-xor0", "cpm-gop-dp", "none", + "cpm-pcie_x10", "cpm-pcie_x11", "cpm-pcie_x4", "cpm-pcie-xor", "cpm-sata", + "cpm-sata-usb", "cpm-main", "cpm-sd-mmc", "none", "none", "cpm-slow-io", + "cpm-usb3h0", "cpm-usb3h1", "cpm-usb3dev", "cpm-eip150", "cpm-eip197"; + }; diff --git a/Documentation/devicetree/bindings/arm/omap/crossbar.txt b/Documentation/devicetree/bindings/arm/omap/crossbar.txt index a9b28d74d902..bb5727ae004a 100644 --- a/Documentation/devicetree/bindings/arm/omap/crossbar.txt +++ b/Documentation/devicetree/bindings/arm/omap/crossbar.txt @@ -42,7 +42,8 @@ Examples: Consumer: ======== See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt and -Documentation/devicetree/bindings/arm/gic.txt for further details. +Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt for +further details. An interrupt consumer on an SoC using crossbar will use: interrupts = <GIC_SPI request_number interrupt_level> diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index 21e71a5e866e..94b57f247615 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -133,6 +133,9 @@ Boards: - AM335X Bone : Low cost community board compatible = "ti,am335x-bone", "ti,am33xx", "ti,omap3" +- AM3359 ICEv2 : Low cost Industrial Communication Engine EVM. + compatible = "ti,am3359-icev2", "ti,am33xx", "ti,omap3" + - AM335X OrionLXm : Substation Automation Platform compatible = "novatech,am335x-lxm", "ti,am33xx" @@ -169,6 +172,9 @@ Boards: - AM57XX SBC-AM57x compatible = "compulab,sbc-am57x", "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7" +- AM5728 IDK + compatible = "ti,am5728-idk", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7" + - DRA742 EVM: Software Development Board for DRA742 compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7" diff --git a/Documentation/devicetree/bindings/arm/oxnas.txt b/Documentation/devicetree/bindings/arm/oxnas.txt new file mode 100644 index 000000000000..b9e49711ba05 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/oxnas.txt @@ -0,0 +1,9 @@ +Oxford Semiconductor OXNAS SoCs Family device tree bindings +------------------------------------------- + +Boards with the OX810SE SoC shall have the following properties: + Required root node property: + compatible: "oxsemi,ox810se" + +Board compatible values: + - "wd,mbwe" (OX810SE) diff --git a/Documentation/devicetree/bindings/arm/pmu.txt b/Documentation/devicetree/bindings/arm/pmu.txt index 6eb73be9433e..74d5417d0410 100644 --- a/Documentation/devicetree/bindings/arm/pmu.txt +++ b/Documentation/devicetree/bindings/arm/pmu.txt @@ -22,10 +22,11 @@ Required properties: "arm,arm11mpcore-pmu" "arm,arm1176-pmu" "arm,arm1136-pmu" + "brcm,vulcan-pmu" + "cavium,thunder-pmu" "qcom,scorpion-pmu" "qcom,scorpion-mp-pmu" "qcom,krait-pmu" - "cavium,thunder-pmu" - interrupts : 1 combined interrupt or 1 per core. If the interrupt is a per-cpu interrupt (PPI) then 1 interrupt should be specified. diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt index 078c14fcdaaa..715d960d5eea 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.txt +++ b/Documentation/devicetree/bindings/arm/rockchip.txt @@ -39,6 +39,10 @@ Rockchip platforms device tree bindings Required root node properties: - compatible = "netxeon,r89", "rockchip,rk3288"; +- GeekBuying GeekBox: + Required root node properties: + - compatible = "geekbuying,geekbox", "rockchip,rk3368"; + - Google Brain (dev-board): Required root node properties: - compatible = "google,veyron-brain-rev0", "google,veyron-brain", @@ -87,6 +91,10 @@ Rockchip platforms device tree bindings "google,veyron-speedy-rev3", "google,veyron-speedy-rev2", "google,veyron-speedy", "google,veyron", "rockchip,rk3288"; +- mqmaker MiQi: + Required root node properties: + - compatible = "mqmaker,miqi", "rockchip,rk3288"; + - Rockchip RK3368 evb: Required root node properties: - compatible = "rockchip,rk3368-evb-act8846", "rockchip,rk3368"; @@ -97,4 +105,8 @@ Rockchip platforms device tree bindings - Rockchip RK3228 Evaluation board: Required root node properties: - - compatible = "rockchip,rk3228-evb", "rockchip,rk3228"; + - compatible = "rockchip,rk3228-evb", "rockchip,rk3228"; + +- Rockchip RK3399 evb: + Required root node properties: + - compatible = "rockchip,rk3399-evb", "rockchip,rk3399"; diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt index 12129c011c8f..f5deace2b380 100644 --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt @@ -2,6 +2,8 @@ Required root node properties: - compatible = should be one or more of the following. + - "samsung,artik5" - for Exynos3250-based Samsung ARTIK5 module. + - "samsung,artik5-eval" - for Exynos3250-based Samsung ARTIK5 eval board. - "samsung,monk" - for Exynos3250-based Samsung Simband board. - "samsung,rinato" - for Exynos3250-based Samsung Gear2 board. - "samsung,smdkv310" - for Exynos4210-based Samsung SMDKV310 eval board. diff --git a/Documentation/devicetree/bindings/arm/spear-misc.txt b/Documentation/devicetree/bindings/arm/spear-misc.txt index cf649827ffcd..e404e2556b4a 100644 --- a/Documentation/devicetree/bindings/arm/spear-misc.txt +++ b/Documentation/devicetree/bindings/arm/spear-misc.txt @@ -6,4 +6,4 @@ few properties of different peripheral controllers. misc node required properties: - compatible Should be "st,spear1340-misc", "syscon". -- reg: Address range of misc space upto 8K +- reg: Address range of misc space up to 8K diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt index 02c27004d4a8..a74b37b07e5c 100644 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt @@ -1,16 +1,20 @@ NVIDIA Tegra Power Management Controller (PMC) +== Power Management Controller Node == + The PMC block interacts with an external Power Management Unit. The PMC mostly controls the entry and exit of the system from different sleep modes. It provides power-gating controllers for SoC and CPU power-islands. Required properties: - name : Should be pmc -- compatible : For Tegra20, must contain "nvidia,tegra20-pmc". For Tegra30, - must contain "nvidia,tegra30-pmc". For Tegra114, must contain - "nvidia,tegra114-pmc". For Tegra124, must contain "nvidia,tegra124-pmc". - Otherwise, must contain "nvidia,<chip>-pmc", plus at least one of the - above, where <chip> is tegra132. +- compatible : Should contain one of the following: + For Tegra20 must contain "nvidia,tegra20-pmc". + For Tegra30 must contain "nvidia,tegra30-pmc". + For Tegra114 must contain "nvidia,tegra114-pmc" + For Tegra124 must contain "nvidia,tegra124-pmc" + For Tegra132 must contain "nvidia,tegra124-pmc" + For Tegra210 must contain "nvidia,tegra210-pmc" - reg : Offset and length of the register set for the device - clocks : Must contain an entry for each entry in clock-names. See ../clocks/clock-bindings.txt for details. @@ -68,6 +72,11 @@ Optional properties for hardware-triggered thermal reset (inside 'i2c-thermtrip' Defaults to 0. Valid values are described in section 12.5.2 "Pinmux Support" of the Tegra4 Technical Reference Manual. +Optional nodes: +- powergates : This node contains a hierarchy of power domain nodes, which + should match the powergates on the Tegra SoC. See "Powergate + Nodes" below. + Example: / SoC dts including file @@ -113,3 +122,76 @@ pmc@7000f400 { }; ... }; + + +== Powergate Nodes == + +Each of the powergate nodes represents a power-domain on the Tegra SoC +that can be power-gated by the Tegra PMC. The name of the powergate node +should be one of the below. Note that not every powergate is applicable +to all Tegra devices and the following list shows which powergates are +applicable to which devices. Please refer to the Tegra TRM for more +details on the various powergates. + + Name Description Devices Applicable + 3d 3D Graphics Tegra20/114/124/210 + 3d0 3D Graphics 0 Tegra30 + 3d1 3D Graphics 1 Tegra30 + aud Audio Tegra210 + dfd Debug Tegra210 + dis Display A Tegra114/124/210 + disb Display B Tegra114/124/210 + heg 2D Graphics Tegra30/114/124/210 + iram Internal RAM Tegra124/210 + mpe MPEG Encode All + nvdec NVIDIA Video Decode Engine Tegra210 + nvjpg NVIDIA JPEG Engine Tegra210 + pcie PCIE Tegra20/30/124/210 + sata SATA Tegra30/124/210 + sor Display interfaces Tegra124/210 + ve2 Video Encode Engine 2 Tegra210 + venc Video Encode Engine All + vdec Video Decode Engine Tegra20/30/114/124 + vic Video Imaging Compositor Tegra124/210 + xusba USB Partition A Tegra114/124/210 + xusbb USB Partition B Tegra114/124/210 + xusbc USB Partition C Tegra114/124/210 + +Required properties: + - clocks: Must contain an entry for each clock required by the PMC for + controlling a power-gate. See ../clocks/clock-bindings.txt for details. + - resets: Must contain an entry for each reset required by the PMC for + controlling a power-gate. See ../reset/reset.txt for details. + - #power-domain-cells: Must be 0. + +Example: + + pmc: pmc@7000e400 { + compatible = "nvidia,tegra210-pmc"; + reg = <0x0 0x7000e400 0x0 0x400>; + clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>; + clock-names = "pclk", "clk32k_in"; + + powergates { + pd_audio: aud { + clocks = <&tegra_car TEGRA210_CLK_APE>, + <&tegra_car TEGRA210_CLK_APB2APE>; + resets = <&tegra_car 198>; + #power-domain-cells = <0>; + }; + }; + }; + + +== Powergate Clients == + +Hardware blocks belonging to a power domain should contain a "power-domains" +property that is a phandle pointing to the corresponding powergate node. + +Example: + + adma: adma@702e2000 { + ... + power-domains = <&pd_audio>; + ... + }; diff --git a/Documentation/devicetree/bindings/arm/ux500/boards.txt b/Documentation/devicetree/bindings/arm/ux500/boards.txt index b8737a8de718..7334c24625fc 100644 --- a/Documentation/devicetree/bindings/arm/ux500/boards.txt +++ b/Documentation/devicetree/bindings/arm/ux500/boards.txt @@ -23,7 +23,7 @@ scu: see binding for arm/scu.txt interrupt-controller: - see binding for arm/gic.txt + see binding for interrupt-controller/arm,gic.txt timer: see binding for arm/twd.txt diff --git a/Documentation/devicetree/bindings/ata/tegra-sata.txt b/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt index 66c83c3e8915..66c83c3e8915 100644 --- a/Documentation/devicetree/bindings/ata/tegra-sata.txt +++ b/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt diff --git a/Documentation/devicetree/bindings/btmrvl.txt b/Documentation/devicetree/bindings/btmrvl.txt deleted file mode 100644 index 58f964bb0a52..000000000000 --- a/Documentation/devicetree/bindings/btmrvl.txt +++ /dev/null @@ -1,29 +0,0 @@ -btmrvl ------- - -Required properties: - - - compatible : must be "btmrvl,cfgdata" - -Optional properties: - - - btmrvl,cal-data : Calibration data downloaded to the device during - initialization. This is an array of 28 values(u8). - - - btmrvl,gpio-gap : gpio and gap (in msecs) combination to be - configured. - -Example: - -GPIO pin 13 is configured as a wakeup source and GAP is set to 100 msecs -in below example. - -btmrvl { - compatible = "btmrvl,cfgdata"; - - btmrvl,cal-data = /bits/ 8 < - 0x37 0x01 0x1c 0x00 0xff 0xff 0xff 0xff 0x01 0x7f 0x04 0x02 - 0x00 0x00 0xba 0xce 0xc0 0xc6 0x2d 0x00 0x00 0x00 0x00 0x00 - 0x00 0x00 0xf0 0x00>; - btmrvl,gpio-gap = <0x0d64>; -}; diff --git a/Documentation/devicetree/bindings/clock/artpec6.txt b/Documentation/devicetree/bindings/clock/artpec6.txt new file mode 100644 index 000000000000..dff9cdf0009c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/artpec6.txt @@ -0,0 +1,41 @@ +* Clock bindings for Axis ARTPEC-6 chip + +The bindings are based on the clock provider binding in +Documentation/devicetree/bindings/clock/clock-bindings.txt + +External clocks: +---------------- + +There are two external inputs to the main clock controller which should be +provided using the common clock bindings. +- "sys_refclk": External 50 Mhz oscillator (required) +- "i2s_refclk": Alternate audio reference clock (optional). + +Main clock controller +--------------------- + +Required properties: +- #clock-cells: Should be <1> + See dt-bindings/clock/axis,artpec6-clkctrl.h for the list of valid identifiers. +- compatible: Should be "axis,artpec6-clkctrl" +- reg: Must contain the base address and length of the system controller +- clocks: Must contain a phandle entry for each clock in clock-names +- clock-names: Must include the external oscillator ("sys_refclk"). Optional + ones are the audio reference clock ("i2s_refclk") and the audio fractional + dividers ("frac_clk0" and "frac_clk1"). + +Examples: + +ext_clk: ext_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <50000000>; +}; + +clkctrl: clkctrl@f8000000 { + #clock-cells = <1>; + compatible = "axis,artpec6-clkctrl"; + reg = <0xf8000000 0x48>; + clocks = <&ext_clk>; + clock-names = "sys_refclk"; +}; diff --git a/Documentation/devicetree/bindings/clock/axs10x-i2s-pll-clock.txt b/Documentation/devicetree/bindings/clock/axs10x-i2s-pll-clock.txt new file mode 100644 index 000000000000..5ffc8df7e6da --- /dev/null +++ b/Documentation/devicetree/bindings/clock/axs10x-i2s-pll-clock.txt @@ -0,0 +1,25 @@ +Binding for the AXS10X I2S PLL clock + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible: shall be "snps,axs10x-i2s-pll-clock" +- reg : address and length of the I2S PLL register set. +- clocks: shall be the input parent clock phandle for the PLL. +- #clock-cells: from common clock binding; Should always be set to 0. + +Example: + pll_clock: pll_clock { + compatible = "fixed-clock"; + clock-frequency = <27000000>; + #clock-cells = <0>; + }; + + i2s_clock@100a0 { + compatible = "snps,axs10x-i2s-pll-clock"; + reg = <0x100a0 0x10>; + clocks = <&pll_clock>; + #clock-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/clock/hi3519-crg.txt b/Documentation/devicetree/bindings/clock/hi3519-crg.txt new file mode 100644 index 000000000000..acd1f235d548 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/hi3519-crg.txt @@ -0,0 +1,46 @@ +* Hisilicon Hi3519 Clock and Reset Generator(CRG) + +The Hi3519 CRG module provides clock and reset signals to various +controllers within the SoC. + +This binding uses the following bindings: + Documentation/devicetree/bindings/clock/clock-bindings.txt + Documentation/devicetree/bindings/reset/reset.txt + +Required Properties: + +- compatible: should be one of the following. + - "hisilicon,hi3519-crg" - controller compatible with Hi3519 SoC. + +- reg: physical base address of the controller and length of memory mapped + region. + +- #clock-cells: should be 1. + +Each clock is assigned an identifier and client nodes use this identifier +to specify the clock which they consume. + +All these identifier could be found in <dt-bindings/clock/hi3519-clock.h>. + +- #reset-cells: should be 2. + +A reset signal can be controlled by writing a bit register in the CRG module. +The reset specifier consists of two cells. The first cell represents the +register offset relative to the base address. The second cell represents the +bit index in the register. + +Example: CRG nodes +CRG: clock-reset-controller@12010000 { + compatible = "hisilicon,hi3519-crg"; + reg = <0x12010000 0x10000>; + #clock-cells = <1>; + #reset-cells = <2>; +}; + +Example: consumer nodes +i2c0: i2c@12110000 { + compatible = "hisilicon,hi3519-i2c"; + reg = <0x12110000 0x1000>; + clocks = <&CRG HI3519_I2C0_RST>; + resets = <&CRG 0xe4 0>; +}; diff --git a/Documentation/devicetree/bindings/clock/imx35-clock.txt b/Documentation/devicetree/bindings/clock/imx35-clock.txt index a70356452a82..f49783213c56 100644 --- a/Documentation/devicetree/bindings/clock/imx35-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx35-clock.txt @@ -94,6 +94,7 @@ clocks and IDs. csi_sel 79 iim_gate 80 gpu2d_gate 81 + ckli_gate 82 Examples: diff --git a/Documentation/devicetree/bindings/clock/microchip,pic32.txt b/Documentation/devicetree/bindings/clock/microchip,pic32.txt new file mode 100644 index 000000000000..c93d88fdd858 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/microchip,pic32.txt @@ -0,0 +1,39 @@ +Microchip PIC32 Clock Controller Binding +---------------------------------------- +Microchip clock controller is consists of few oscillators, PLL, multiplexer +and few divider modules. + +This binding uses common clock bindings. +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible: shall be "microchip,pic32mzda-clk". +- reg: shall contain base address and length of clock registers. +- #clock-cells: shall be 1. + +Optional properties: +- microchip,pic32mzda-sosc: shall be added only if platform has + secondary oscillator connected. + +Example: + rootclk: clock-controller@1f801200 { + compatible = "microchip,pic32mzda-clk"; + reg = <0x1f801200 0x200>; + #clock-cells = <1>; + /* optional */ + microchip,pic32mzda-sosc; + }; + + +The clock consumer shall specify the desired clock-output of the clock +controller (as defined in [2]) by specifying output-id in its "clock" +phandle cell. +[2] include/dt-bindings/clock/microchip,pic32-clock.h + +For example for UART2: +uart2: serial@2 { + compatible = "microchip,pic32mzda-uart"; + reg = <>; + interrupts = <>; + clocks = <&rootclk PB2CLK>; +}; diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt index ee7e5fd4a50b..63f9d8277d48 100644 --- a/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt @@ -50,7 +50,7 @@ Required properties for I2C mode: Example: -clock@0,70110000 { +clock@70110000 { compatible = "nvidia,tegra124-dfll"; reg = <0 0x70110000 0 0x100>, /* DFLL control */ <0 0x70110000 0 0x100>, /* I2C output control */ diff --git a/Documentation/devicetree/bindings/clock/oxnas,stdclk.txt b/Documentation/devicetree/bindings/clock/oxnas,stdclk.txt new file mode 100644 index 000000000000..208cca6ac4ec --- /dev/null +++ b/Documentation/devicetree/bindings/clock/oxnas,stdclk.txt @@ -0,0 +1,35 @@ +Oxford Semiconductor OXNAS SoC Family Standard Clocks +================================================ + +Please also refer to clock-bindings.txt in this directory for common clock +bindings usage. + +Required properties: +- compatible: Should be "oxsemi,ox810se-stdclk" +- #clock-cells: 1, see below + +Parent node should have the following properties : +- compatible: Should be "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd" + +For OX810SE, the clock indices are : + - 0: LEON + - 1: DMA_SGDMA + - 2: CIPHER + - 3: SATA + - 4: AUDIO + - 5: USBMPH + - 6: ETHA + - 7: PCIA + - 8: NAND + +example: + +sys: sys-ctrl@000000 { + compatible = "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd"; + reg = <0x000000 0x100000>; + + stdclk: stdclk { + compatible = "oxsemi,ox810se-stdclk"; + #clock-cells = <1>; + }; +}; diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt index 0c2bf5eba43e..7f368530a2e4 100644 --- a/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt @@ -16,7 +16,7 @@ Required Properties: Optional Properties: - rockchip,grf: phandle to the syscon managing the "general register files" - If missing pll rates are not changable, due to the missing pll lock status. + If missing pll rates are not changeable, due to the missing pll lock status. Each clock is assigned an identifier and client nodes can use this identifier to specify the clock which they consume. All available clocks are defined as diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt index c9fbb76573e1..8cb47c39ba53 100644 --- a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt @@ -15,7 +15,7 @@ Required Properties: Optional Properties: - rockchip,grf: phandle to the syscon managing the "general register files" - If missing pll rates are not changable, due to the missing pll lock status. + If missing pll rates are not changeable, due to the missing pll lock status. Each clock is assigned an identifier and client nodes can use this identifier to specify the clock which they consume. All available clocks are defined as diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt new file mode 100644 index 000000000000..3888dd33fcbd --- /dev/null +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt @@ -0,0 +1,62 @@ +* Rockchip RK3399 Clock and Reset Unit + +The RK3399 clock controller generates and supplies clock to various +controllers within the SoC and also implements a reset controller for SoC +peripherals. + +Required Properties: + +- compatible: PMU for CRU should be "rockchip,rk3399-pmucru" +- compatible: CRU should be "rockchip,rk3399-cru" +- reg: physical base address of the controller and length of memory mapped + region. +- #clock-cells: should be 1. +- #reset-cells: should be 1. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. All available clocks are defined as +preprocessor macros in the dt-bindings/clock/rk3399-cru.h headers and can be +used in device tree sources. Similar macros exist for the reset sources in +these files. + +External clocks: + +There are several clocks that are generated outside the SoC. It is expected +that they are defined using standard clock bindings with following +clock-output-names: + - "xin24m" - crystal input - required, + - "xin32k" - rtc clock - optional, + - "clkin_gmac" - external GMAC clock - optional, + - "clkin_i2s" - external I2S clock - optional, + - "pclkin_cif" - external ISP clock - optional, + - "clk_usbphy0_480m" - output clock of the pll in the usbphy0 + - "clk_usbphy1_480m" - output clock of the pll in the usbphy1 + +Example: Clock controller node: + + pmucru: pmu-clock-controller@ff750000 { + compatible = "rockchip,rk3399-pmucru"; + reg = <0x0 0xff750000 0x0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + cru: clock-controller@ff760000 { + compatible = "rockchip,rk3399-cru"; + reg = <0x0 0xff760000 0x0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + +Example: UART controller node that consumes the clock generated by the clock + controller: + + uart0: serial@ff1a0000 { + compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff180000 0x0 0x100>; + clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + }; diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt index 78978f1f5158..b18bf86f926f 100644 --- a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt +++ b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt @@ -40,7 +40,7 @@ address is common of all subnode. }; This binding uses the common clock binding[1]. -Each subnode should use the binding discribe in [2]..[7] +Each subnode should use the binding described in [2]..[7] [1] Documentation/devicetree/bindings/clock/clock-bindings.txt [2] Documentation/devicetree/bindings/clock/st,clkgen-divmux.txt diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt index 834436fbe83d..8f7619d8c8d8 100644 --- a/Documentation/devicetree/bindings/clock/sunxi.txt +++ b/Documentation/devicetree/bindings/clock/sunxi.txt @@ -10,6 +10,7 @@ Required properties: "allwinner,sun4i-a10-pll1-clk" - for the main PLL clock and PLL4 "allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31 "allwinner,sun8i-a23-pll1-clk" - for the main PLL clock on A23 + "allwinner,sun4i-a10-pll3-clk" - for the video PLL clock on A10 "allwinner,sun9i-a80-pll4-clk" - for the peripheral PLLs on A80 "allwinner,sun4i-a10-pll5-clk" - for the PLL5 clock "allwinner,sun4i-a10-pll6-clk" - for the PLL6 clock @@ -63,7 +64,9 @@ Required properties: "allwinner,sun8i-a83t-bus-gates-clk" - for the bus gates on A83T "allwinner,sun8i-h3-bus-gates-clk" - for the bus gates on H3 "allwinner,sun9i-a80-apbs-gates-clk" - for the APBS gates on A80 + "allwinner,sun4i-a10-display-clk" - for the display clocks on the A10 "allwinner,sun4i-a10-dram-gates-clk" - for the DRAM gates on A10 + "allwinner,sun5i-a13-dram-gates-clk" - for the DRAM gates on A13 "allwinner,sun5i-a13-mbus-clk" - for the MBUS clock on A13 "allwinner,sun4i-a10-mmc-clk" - for the MMC clock "allwinner,sun9i-a80-mmc-clk" - for mmc module clocks on A80 @@ -73,6 +76,8 @@ Required properties: "allwinner,sun8i-a23-mbus-clk" - for the MBUS clock on A23 "allwinner,sun7i-a20-out-clk" - for the external output clocks "allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31 + "allwinner,sun4i-a10-tcon-ch0-clk" - for the TCON channel 0 clock on the A10 + "allwinner,sun4i-a10-tcon-ch1-clk" - for the TCON channel 1 clock on the A10 "allwinner,sun4i-a10-usb-clk" - for usb gates + resets on A10 / A20 "allwinner,sun5i-a13-usb-clk" - for usb gates + resets on A13 "allwinner,sun6i-a31-usb-clk" - for usb gates + resets on A31 @@ -81,6 +86,7 @@ Required properties: "allwinner,sun9i-a80-usb-mod-clk" - for usb gates + resets on A80 "allwinner,sun9i-a80-usb-phy-clk" - for usb phy gates + resets on A80 "allwinner,sun4i-a10-ve-clk" - for the Video Engine clock + "allwinner,sun6i-a31-display-clk" - for the display clocks Required properties for all clocks: - reg : shall be the control register address for the clock. diff --git a/Documentation/devicetree/bindings/cpufreq/tegra124-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra124-cpufreq.txt index b1669fbfb740..b1669fbfb740 100644 --- a/Documentation/devicetree/bindings/cpufreq/tegra124-cpufreq.txt +++ b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra124-cpufreq.txt diff --git a/Documentation/devicetree/bindings/crypto/fsl-imx-scc.txt b/Documentation/devicetree/bindings/crypto/fsl-imx-scc.txt new file mode 100644 index 000000000000..7aad448e8a36 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/fsl-imx-scc.txt @@ -0,0 +1,21 @@ +Freescale Security Controller (SCC) + +Required properties: +- compatible : Should be "fsl,imx25-scc". +- reg : Should contain register location and length. +- interrupts : Should contain interrupt numbers for SCM IRQ and SMN IRQ. +- interrupt-names : Should specify the names "scm" and "smn" for the + SCM IRQ and SMN IRQ. +- clocks: Should contain the clock driving the SCC core. +- clock-names: Should be set to "ipg". + +Example: + + scc: crypto@53fac000 { + compatible = "fsl,imx25-scc"; + reg = <0x53fac000 0x4000>; + clocks = <&clks 111>; + clock-names = "ipg"; + interrupts = <49>, <50>; + interrupt-names = "scm", "smn"; + }; diff --git a/Documentation/devicetree/bindings/crypto/samsung-sss.txt b/Documentation/devicetree/bindings/crypto/samsung-sss.txt index a6dafa83c6df..7a5ca56683cc 100644 --- a/Documentation/devicetree/bindings/crypto/samsung-sss.txt +++ b/Documentation/devicetree/bindings/crypto/samsung-sss.txt @@ -23,10 +23,8 @@ Required properties: - "samsung,exynos4210-secss" for Exynos4210, Exynos4212, Exynos4412, Exynos5250, Exynos5260 and Exynos5420 SoCs. - reg : Offset and length of the register set for the module -- interrupts : interrupt specifiers of SSS module interrupts, should contain - following entries: - - first : feed control interrupt (required for all variants), - - second : hash interrupt (required only for samsung,s5pv210-secss). +- interrupts : interrupt specifiers of SSS module interrupts (one feed + control interrupt). - clocks : list of clock phandle and specifier pairs for all clocks listed in clock-names property. diff --git a/Documentation/devicetree/bindings/devfreq/event/exynos-nocp.txt b/Documentation/devicetree/bindings/devfreq/event/exynos-nocp.txt new file mode 100644 index 000000000000..fd459f00aa5a --- /dev/null +++ b/Documentation/devicetree/bindings/devfreq/event/exynos-nocp.txt @@ -0,0 +1,26 @@ + +* Samsung Exynos NoC (Network on Chip) Probe device + +The Samsung Exynos542x SoC has NoC (Network on Chip) Probe for NoC bus. +NoC provides the primitive values to get the performance data. The packets +that the Network on Chip (NoC) probes detects are transported over +the network infrastructure to observer units. You can configure probes to +capture packets with header or data on the data request response network, +or as traffic debug or statistic collectors. Exynos542x bus has multiple +NoC probes to provide bandwidth information about behavior of the SoC +that you can use while analyzing system performance. + +Required properties: +- compatible: Should be "samsung,exynos5420-nocp" +- reg: physical base address of each NoC Probe and length of memory mapped region. + +Optional properties: +- clock-names : the name of clock used by the NoC Probe, "nocp" +- clocks : phandles for clock specified in "clock-names" property + +Example : NoC Probe nodes in Device Tree are listed below. + + nocp_mem0_0: nocp@10CA1000 { + compatible = "samsung,exynos5420-nocp"; + reg = <0x10CA1000 0x200>; + }; diff --git a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt new file mode 100644 index 000000000000..d3ec8e676b6b --- /dev/null +++ b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt @@ -0,0 +1,409 @@ +* Generic Exynos Bus frequency device + +The Samsung Exynos SoC has many buses for data transfer between DRAM +and sub-blocks in SoC. Most Exynos SoCs share the common architecture +for buses. Generally, each bus of Exynos SoC includes a source clock +and a power line, which are able to change the clock frequency +of the bus in runtime. To monitor the usage of each bus in runtime, +the driver uses the PPMU (Platform Performance Monitoring Unit), which +is able to measure the current load of sub-blocks. + +The Exynos SoC includes the various sub-blocks which have the each AXI bus. +The each AXI bus has the owned source clock but, has not the only owned +power line. The power line might be shared among one more sub-blocks. +So, we can divide into two type of device as the role of each sub-block. +There are two type of bus devices as following: +- parent bus device +- passive bus device + +Basically, parent and passive bus device share the same power line. +The parent bus device can only change the voltage of shared power line +and the rest bus devices (passive bus device) depend on the decision of +the parent bus device. If there are three blocks which share the VDD_xxx +power line, Only one block should be parent device and then the rest blocks +should depend on the parent device as passive device. + + VDD_xxx |--- A block (parent) + |--- B block (passive) + |--- C block (passive) + +There are a little different composition among Exynos SoC because each Exynos +SoC has different sub-blocks. Therefore, such difference should be specified +in devicetree file instead of each device driver. In result, this driver +is able to support the bus frequency for all Exynos SoCs. + +Required properties for all bus devices: +- compatible: Should be "samsung,exynos-bus". +- clock-names : the name of clock used by the bus, "bus". +- clocks : phandles for clock specified in "clock-names" property. +- operating-points-v2: the OPP table including frequency/voltage information + to support DVFS (Dynamic Voltage/Frequency Scaling) feature. + +Required properties only for parent bus device: +- vdd-supply: the regulator to provide the buses with the voltage. +- devfreq-events: the devfreq-event device to monitor the current utilization + of buses. + +Required properties only for passive bus device: +- devfreq: the parent bus device. + +Optional properties only for parent bus device: +- exynos,saturation-ratio: the percentage value which is used to calibrate + the performance count against total cycle count. +- exynos,voltage-tolerance: the percentage value for bus voltage tolerance + which is used to calculate the max voltage. + +Detailed correlation between sub-blocks and power line according to Exynos SoC: +- In case of Exynos3250, there are two power line as following: + VDD_MIF |--- DMC + + VDD_INT |--- LEFTBUS (parent device) + |--- PERIL + |--- MFC + |--- G3D + |--- RIGHTBUS + |--- PERIR + |--- FSYS + |--- LCD0 + |--- PERIR + |--- ISP + |--- CAM + +- In case of Exynos4210, there is one power line as following: + VDD_INT |--- DMC (parent device) + |--- LEFTBUS + |--- PERIL + |--- MFC(L) + |--- G3D + |--- TV + |--- LCD0 + |--- RIGHTBUS + |--- PERIR + |--- MFC(R) + |--- CAM + |--- FSYS + |--- GPS + |--- LCD0 + |--- LCD1 + +- In case of Exynos4x12, there are two power line as following: + VDD_MIF |--- DMC + + VDD_INT |--- LEFTBUS (parent device) + |--- PERIL + |--- MFC(L) + |--- G3D + |--- TV + |--- IMAGE + |--- RIGHTBUS + |--- PERIR + |--- MFC(R) + |--- CAM + |--- FSYS + |--- GPS + |--- LCD0 + |--- ISP + +- In case of Exynos5422, there are two power line as following: + VDD_MIF |--- DREX 0 (parent device, DRAM EXpress controller) + |--- DREX 1 + + VDD_INT |--- NoC_Core (parent device) + |--- G2D + |--- G3D + |--- DISP1 + |--- NoC_WCORE + |--- GSCL + |--- MSCL + |--- ISP + |--- MFC + |--- GEN + |--- PERIS + |--- PERIC + |--- FSYS + |--- FSYS2 + +Example1: + Show the AXI buses of Exynos3250 SoC. Exynos3250 divides the buses to + power line (regulator). The MIF (Memory Interface) AXI bus is used to + transfer data between DRAM and CPU and uses the VDD_MIF regulator. + + - MIF (Memory Interface) block + : VDD_MIF |--- DMC (Dynamic Memory Controller) + + - INT (Internal) block + : VDD_INT |--- LEFTBUS (parent device) + |--- PERIL + |--- MFC + |--- G3D + |--- RIGHTBUS + |--- FSYS + |--- LCD0 + |--- PERIR + |--- ISP + |--- CAM + + - MIF bus's frequency/voltage table + ----------------------- + |Lv| Freq | Voltage | + ----------------------- + |L1| 50000 |800000 | + |L2| 100000 |800000 | + |L3| 134000 |800000 | + |L4| 200000 |825000 | + |L5| 400000 |875000 | + ----------------------- + + - INT bus's frequency/voltage table + ---------------------------------------------------------- + |Block|LEFTBUS|RIGHTBUS|MCUISP |ISP |PERIL ||VDD_INT | + | name| |LCD0 | | | || | + | | |FSYS | | | || | + | | |MFC | | | || | + ---------------------------------------------------------- + |Mode |*parent|passive |passive|passive|passive|| | + ---------------------------------------------------------- + |Lv |Frequency ||Voltage | + ---------------------------------------------------------- + |L1 |50000 |50000 |50000 |50000 |50000 ||900000 | + |L2 |80000 |80000 |80000 |80000 |80000 ||900000 | + |L3 |100000 |100000 |100000 |100000 |100000 ||1000000 | + |L4 |134000 |134000 |200000 |200000 | ||1000000 | + |L5 |200000 |200000 |400000 |300000 | ||1000000 | + ---------------------------------------------------------- + +Example2 : + The bus of DMC (Dynamic Memory Controller) block in exynos3250.dtsi + is listed below: + + bus_dmc: bus_dmc { + compatible = "samsung,exynos-bus"; + clocks = <&cmu_dmc CLK_DIV_DMC>; + clock-names = "bus"; + operating-points-v2 = <&bus_dmc_opp_table>; + status = "disabled"; + }; + + bus_dmc_opp_table: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; + + opp@50000000 { + opp-hz = /bits/ 64 <50000000>; + opp-microvolt = <800000>; + }; + opp@100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <800000>; + }; + opp@134000000 { + opp-hz = /bits/ 64 <134000000>; + opp-microvolt = <800000>; + }; + opp@200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-microvolt = <825000>; + }; + opp@400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <875000>; + }; + }; + + bus_leftbus: bus_leftbus { + compatible = "samsung,exynos-bus"; + clocks = <&cmu CLK_DIV_GDL>; + clock-names = "bus"; + operating-points-v2 = <&bus_leftbus_opp_table>; + status = "disabled"; + }; + + bus_rightbus: bus_rightbus { + compatible = "samsung,exynos-bus"; + clocks = <&cmu CLK_DIV_GDR>; + clock-names = "bus"; + operating-points-v2 = <&bus_leftbus_opp_table>; + status = "disabled"; + }; + + bus_lcd0: bus_lcd0 { + compatible = "samsung,exynos-bus"; + clocks = <&cmu CLK_DIV_ACLK_160>; + clock-names = "bus"; + operating-points-v2 = <&bus_leftbus_opp_table>; + status = "disabled"; + }; + + bus_fsys: bus_fsys { + compatible = "samsung,exynos-bus"; + clocks = <&cmu CLK_DIV_ACLK_200>; + clock-names = "bus"; + operating-points-v2 = <&bus_leftbus_opp_table>; + status = "disabled"; + }; + + bus_mcuisp: bus_mcuisp { + compatible = "samsung,exynos-bus"; + clocks = <&cmu CLK_DIV_ACLK_400_MCUISP>; + clock-names = "bus"; + operating-points-v2 = <&bus_mcuisp_opp_table>; + status = "disabled"; + }; + + bus_isp: bus_isp { + compatible = "samsung,exynos-bus"; + clocks = <&cmu CLK_DIV_ACLK_266>; + clock-names = "bus"; + operating-points-v2 = <&bus_isp_opp_table>; + status = "disabled"; + }; + + bus_peril: bus_peril { + compatible = "samsung,exynos-bus"; + clocks = <&cmu CLK_DIV_ACLK_100>; + clock-names = "bus"; + operating-points-v2 = <&bus_peril_opp_table>; + status = "disabled"; + }; + + bus_mfc: bus_mfc { + compatible = "samsung,exynos-bus"; + clocks = <&cmu CLK_SCLK_MFC>; + clock-names = "bus"; + operating-points-v2 = <&bus_leftbus_opp_table>; + status = "disabled"; + }; + + bus_leftbus_opp_table: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; + + opp@50000000 { + opp-hz = /bits/ 64 <50000000>; + opp-microvolt = <900000>; + }; + opp@80000000 { + opp-hz = /bits/ 64 <80000000>; + opp-microvolt = <900000>; + }; + opp@100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <1000000>; + }; + opp@134000000 { + opp-hz = /bits/ 64 <134000000>; + opp-microvolt = <1000000>; + }; + opp@200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-microvolt = <1000000>; + }; + }; + + bus_mcuisp_opp_table: opp_table2 { + compatible = "operating-points-v2"; + opp-shared; + + opp@50000000 { + opp-hz = /bits/ 64 <50000000>; + }; + opp@80000000 { + opp-hz = /bits/ 64 <80000000>; + }; + opp@100000000 { + opp-hz = /bits/ 64 <100000000>; + }; + opp@200000000 { + opp-hz = /bits/ 64 <200000000>; + }; + opp@400000000 { + opp-hz = /bits/ 64 <400000000>; + }; + }; + + bus_isp_opp_table: opp_table3 { + compatible = "operating-points-v2"; + opp-shared; + + opp@50000000 { + opp-hz = /bits/ 64 <50000000>; + }; + opp@80000000 { + opp-hz = /bits/ 64 <80000000>; + }; + opp@100000000 { + opp-hz = /bits/ 64 <100000000>; + }; + opp@200000000 { + opp-hz = /bits/ 64 <200000000>; + }; + opp@300000000 { + opp-hz = /bits/ 64 <300000000>; + }; + }; + + bus_peril_opp_table: opp_table4 { + compatible = "operating-points-v2"; + opp-shared; + + opp@50000000 { + opp-hz = /bits/ 64 <50000000>; + }; + opp@80000000 { + opp-hz = /bits/ 64 <80000000>; + }; + opp@100000000 { + opp-hz = /bits/ 64 <100000000>; + }; + }; + + + Usage case to handle the frequency and voltage of bus on runtime + in exynos3250-rinato.dts is listed below: + + &bus_dmc { + devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>; + vdd-supply = <&buck1_reg>; /* VDD_MIF */ + status = "okay"; + }; + + &bus_leftbus { + devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>; + vdd-supply = <&buck3_reg>; + status = "okay"; + }; + + &bus_rightbus { + devfreq = <&bus_leftbus>; + status = "okay"; + }; + + &bus_lcd0 { + devfreq = <&bus_leftbus>; + status = "okay"; + }; + + &bus_fsys { + devfreq = <&bus_leftbus>; + status = "okay"; + }; + + &bus_mcuisp { + devfreq = <&bus_leftbus>; + status = "okay"; + }; + + &bus_isp { + devfreq = <&bus_leftbus>; + status = "okay"; + }; + + &bus_peril { + devfreq = <&bus_leftbus>; + status = "okay"; + }; + + &bus_mfc { + devfreq = <&bus_leftbus>; + status = "okay"; + }; diff --git a/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt b/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt index 9f97df4d5152..a5ea451e67fc 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt +++ b/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt @@ -35,12 +35,22 @@ Optional properties for HDMI: as an interrupt/status bit in the HDMI controller itself). See bindings/pinctrl/brcm,bcm2835-gpio.txt +Required properties for DPI: +- compatible: Should be "brcm,bcm2835-dpi" +- reg: Physical base address and length of the registers +- clocks: a) core: The core clock the unit runs on + b) pixel: The pixel clock that feeds the pixelvalve +- port: Port node with a single endpoint connecting to the panel + device, as defined in [1] + Required properties for V3D: - compatible: Should be "brcm,bcm2835-v3d" - reg: Physical base address and length of the V3D's registers - interrupts: The interrupt number See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt +[1] Documentation/devicetree/bindings/media/video-interfaces.txt + Example: pixelvalve@7e807000 { compatible = "brcm,bcm2835-pixelvalve2"; @@ -66,6 +76,22 @@ hdmi: hdmi@7e902000 { clock-names = "pixel", "hdmi"; }; +dpi: dpi@7e208000 { + compatible = "brcm,bcm2835-dpi"; + reg = <0x7e208000 0x8c>; + clocks = <&clocks BCM2835_CLOCK_VPU>, + <&clocks BCM2835_CLOCK_DPI>; + clock-names = "core", "pixel"; + #address-cells = <1>; + #size-cells = <0>; + + port { + dpi_out: endpoint@0 { + remote-endpoint = <&panel_in>; + }; + }; +}; + v3d: v3d@7ec00000 { compatible = "brcm,bcm2835-v3d"; reg = <0x7ec00000 0x1000>; @@ -75,3 +101,13 @@ v3d: v3d@7ec00000 { vc4: gpu { compatible = "brcm,bcm2835-vc4"; }; + +panel: panel { + compatible = "ontat,yx700wv03", "simple-panel"; + + port { + panel_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt new file mode 100644 index 000000000000..4f2ba8c13d92 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt @@ -0,0 +1,52 @@ +Analogix Display Port bridge bindings + +Required properties for dp-controller: + -compatible: + platform specific such as: + * "samsung,exynos5-dp" + * "rockchip,rk3288-dp" + -reg: + physical base address of the controller and length + of memory mapped region. + -interrupts: + interrupt combiner values. + -clocks: + from common clock binding: handle to dp clock. + -clock-names: + from common clock binding: Shall be "dp". + -interrupt-parent: + phandle to Interrupt combiner node. + -phys: + from general PHY binding: the phandle for the PHY device. + -phy-names: + from general PHY binding: Should be "dp". + +Optional properties for dp-controller: + -force-hpd: + Indicate driver need force hpd when hpd detect failed, this + is used for some eDP screen which don't have hpd signal. + -hpd-gpios: + Hotplug detect GPIO. + Indicates which GPIO should be used for hotplug detection + -port@[X]: SoC specific port nodes with endpoint definitions as defined + in Documentation/devicetree/bindings/media/video-interfaces.txt, + please refer to the SoC specific binding document: + * Documentation/devicetree/bindings/display/exynos/exynos_dp.txt + * Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt + +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt +------------------------------------------------------------------------------- + +Example: + + dp-controller { + compatible = "samsung,exynos5-dp"; + reg = <0x145b0000 0x10000>; + interrupts = <10 3>; + interrupt-parent = <&combiner>; + clocks = <&clock 342>; + clock-names = "dp"; + + phys = <&dp_phy>; + phy-names = "dp"; + }; diff --git a/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt b/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt index 377afbf5122a..c9fd7b3807e7 100644 --- a/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt +++ b/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt @@ -5,7 +5,8 @@ Exynos series of SoCs which transfers the image data from a video memory buffer to an external LCD interface. Required properties: -- compatible: value should be "samsung,exynos5433-decon"; +- compatible: value should be one of: + "samsung,exynos5433-decon", "samsung,exynos5433-decon-tv"; - reg: physical base address and length of the DECON registers set. - interrupts: should contain a list of all DECON IP block interrupts in the order: VSYNC, LCD_SYSTEM. The interrupt specifier format @@ -16,7 +17,7 @@ Required properties: - clocks: must include clock specifiers corresponding to entries in the clock-names property. - clock-names: list of clock names sorted in the same order as the clocks - property. Must contain "aclk_decon", "aclk_smmu_decon0x", + property. Must contain "pclk", "aclk_decon", "aclk_smmu_decon0x", "aclk_xiu_decon0x", "pclk_smmu_decon0x", clk_decon_vclk", "sclk_decon_eclk" - ports: contains a port which is connected to mic node. address-cells and diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt index fe4a7a2dea9c..ade5d8eebf85 100644 --- a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt +++ b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt @@ -1,20 +1,3 @@ -Device-Tree bindings for Samsung Exynos Embedded DisplayPort Transmitter(eDP) - -DisplayPort is industry standard to accommodate the growing board adoption -of digital display technology within the PC and CE industries. -It consolidates the internal and external connection methods to reduce device -complexity and cost. It also supports necessary features for important cross -industry applications and provides performance scalability to enable the next -generation of displays that feature higher color depths, refresh rates, and -display resolutions. - -eDP (embedded display port) device is compliant with Embedded DisplayPort -standard as follows, -- DisplayPort standard 1.1a for Exynos5250 and Exynos5260. -- DisplayPort standard 1.3 for Exynos5422s and Exynos5800. - -eDP resides between FIMD and panel or FIMD and bridge such as LVDS. - The Exynos display port interface should be configured based on the type of panel connected to it. @@ -48,26 +31,6 @@ Required properties for dp-controller: from general PHY binding: the phandle for the PHY device. -phy-names: from general PHY binding: Should be "dp". - -samsung,color-space: - input video data format. - COLOR_RGB = 0, COLOR_YCBCR422 = 1, COLOR_YCBCR444 = 2 - -samsung,dynamic-range: - dynamic range for input video data. - VESA = 0, CEA = 1 - -samsung,ycbcr-coeff: - YCbCr co-efficients for input video. - COLOR_YCBCR601 = 0, COLOR_YCBCR709 = 1 - -samsung,color-depth: - number of bits per colour component. - COLOR_6 = 0, COLOR_8 = 1, COLOR_10 = 2, COLOR_12 = 3 - -samsung,link-rate: - link rate supported by the panel. - LINK_RATE_1_62GBPS = 0x6, LINK_RATE_2_70GBPS = 0x0A - -samsung,lane-count: - number of lanes supported by the panel. - LANE_COUNT1 = 1, LANE_COUNT2 = 2, LANE_COUNT4 = 4 - - display-timings: timings for the connected panel as described by - Documentation/devicetree/bindings/display/display-timing.txt Optional properties for dp-controller: -interlaced: @@ -83,17 +46,31 @@ Optional properties for dp-controller: Hotplug detect GPIO. Indicates which GPIO should be used for hotplug detection -Video interfaces: - Device node can contain video interface port nodes according to [1]. - The following are properties specific to those nodes: - - endpoint node connected to bridge or panel node: - - remote-endpoint: specifies the endpoint in panel or bridge node. - This node is required in all kinds of exynos dp - to represent the connection between dp and bridge - or dp and panel. - -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt + -video interfaces: Device node can contain video interface port + nodes according to [1]. + - display-timings: timings for the connected panel as described by + Documentation/devicetree/bindings/display/panel/display-timing.txt + +For the below properties, please refer to Analogix DP binding document: + * Documentation/devicetree/bindings/display/bridge/analogix_dp.txt + -phys (required) + -phy-names (required) + -hpd-gpios (optional) + force-hpd (optional) + +Deprecated properties for DisplayPort: +-interlaced: deprecated prop that can parsed from drm_display_mode. +-vsync-active-high: deprecated prop that can parsed from drm_display_mode. +-hsync-active-high: deprecated prop that can parsed from drm_display_mode. +-samsung,ycbcr-coeff: deprecated prop that can parsed from drm_display_mode. +-samsung,dynamic-range: deprecated prop that can parsed from drm_display_mode. +-samsung,color-space: deprecated prop that can parsed from drm_display_info. +-samsung,color-depth: deprecated prop that can parsed from drm_display_info. +-samsung,link-rate: deprecated prop that can reading from monitor by dpcd method. +-samsung,lane-count: deprecated prop that can reading from monitor by dpcd method. +-samsung,hpd-gpio: deprecated name for hpd-gpios. + +------------------------------------------------------------------------------- Example: @@ -112,13 +89,6 @@ SOC specific portion: Board Specific portion: dp-controller { - samsung,color-space = <0>; - samsung,dynamic-range = <0>; - samsung,ycbcr-coeff = <0>; - samsung,color-depth = <1>; - samsung,link-rate = <0x0a>; - samsung,lane-count = <4>; - display-timings { native-mode = <&lcd_timing>; lcd_timing: 1366x768 { @@ -135,18 +105,9 @@ Board Specific portion: }; ports { - port { + port@0 { dp_out: endpoint { - remote-endpoint = <&dp_in>; - }; - }; - }; - - panel { - ... - port { - dp_in: endpoint { - remote-endpoint = <&dp_out>; + remote-endpoint = <&bridge_in>; }; }; }; diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt index 22756b3dede2..a78265993665 100644 --- a/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt +++ b/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt @@ -41,7 +41,7 @@ Video interfaces: endpoint node connected from mic node (reg = 0): - remote-endpoint: specifies the endpoint in mic node. This node is required for Exynos5433 mipi dsi. So mic can access to panel node - thoughout this dsi node. + throughout this dsi node. endpoint node connected to panel node (reg = 1): - remote-endpoint: specifies the endpoint in panel node. This node is required in all kinds of exynos mipi dsi to represent diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt b/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt index d474f59be6d6..a2ec4c1c9382 100644 --- a/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt +++ b/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt @@ -5,6 +5,7 @@ Required properties: 1) "samsung,exynos4210-hdmi" 2) "samsung,exynos4212-hdmi" 3) "samsung,exynos5420-hdmi" + 4) "samsung,exynos5433-hdmi" - reg: physical base address of the hdmi and length of memory mapped region. - interrupts: interrupt number to the cpu. @@ -12,6 +13,11 @@ Required properties: a) phandle of the gpio controller node. b) pin number within the gpio controller. c) optional flags and pull up/down. +- ddc: phandle to the hdmi ddc node +- phy: phandle to the hdmi phy node +- samsung,syscon-phandle: phandle for system controller node for PMU. + +Required properties for Exynos 4210, 4212, 5420 and 5433: - clocks: list of clock IDs from SoC clock driver. a) hdmi: Gate of HDMI IP bus clock. b) sclk_hdmi: Gate of HDMI special clock. @@ -25,9 +31,24 @@ Required properties: sclk_pixel. - clock-names: aliases as per driver requirements for above clock IDs: "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy" and "mout_hdmi". -- ddc: phandle to the hdmi ddc node -- phy: phandle to the hdmi phy node -- samsung,syscon-phandle: phandle for system controller node for PMU. + +Required properties for Exynos 5433: +- clocks: list of clock specifiers according to common clock bindings. + a) hdmi_pclk: Gate of HDMI IP APB bus. + b) hdmi_i_pclk: Gate of HDMI-PHY IP APB bus. + d) i_tmds_clk: Gate of HDMI TMDS clock. + e) i_pixel_clk: Gate of HDMI pixel clock. + f) i_spdif_clk: Gate of HDMI SPDIF clock. + g) oscclk: Oscillator clock, used as parent of following *_user clocks + in case HDMI-PHY is not operational. + h) tmds_clko: TMDS clock generated by HDMI-PHY. + i) tmds_clko_user: MUX used to switch between oscclk and tmds_clko, + respectively if HDMI-PHY is off and operational. + j) pixel_clko: Pixel clock generated by HDMI-PHY. + k) pixel_clko_user: MUX used to switch between oscclk and pixel_clko, + respectively if HDMI-PHY is off and operational. +- clock-names: aliases for above clock specfiers. +- samsung,sysreg: handle to syscon used to control the system registers. Example: diff --git a/Documentation/devicetree/bindings/display/fsl,dcu.txt b/Documentation/devicetree/bindings/display/fsl,dcu.txt index ebf1be9ae393..ae55cde1b69e 100644 --- a/Documentation/devicetree/bindings/display/fsl,dcu.txt +++ b/Documentation/devicetree/bindings/display/fsl,dcu.txt @@ -6,17 +6,24 @@ Required properties: * "fsl,vf610-dcu". - reg: Address and length of the register set for dcu. -- clocks: From common clock binding: handle to dcu clock. -- clock-names: From common clock binding: Shall be "dcu". +- clocks: Handle to "dcu" and "pix" clock (in the order below) + This can be the same clock (e.g. LS1021a) + See ../clocks/clock-bindings.txt for details. +- clock-names: Should be "dcu" and "pix" + See ../clocks/clock-bindings.txt for details. - big-endian Boolean property, LS1021A DCU registers are big-endian. - fsl,panel: The phandle to panel node. +Optional properties: +- fsl,tcon: The phandle to the timing controller node. + Examples: dcu: dcu@2ce0000 { compatible = "fsl,ls1021a-dcu"; reg = <0x0 0x2ce0000 0x0 0x10000>; - clocks = <&platform_clk 0>; - clock-names = "dcu"; + clocks = <&platform_clk 0>, <&platform_clk 0>; + clock-names = "dcu", "pix"; big-endian; fsl,panel = <&panel>; + fsl,tcon = <&tcon>; }; diff --git a/Documentation/devicetree/bindings/display/fsl,tcon.txt b/Documentation/devicetree/bindings/display/fsl,tcon.txt new file mode 100644 index 000000000000..6fa4ab668db5 --- /dev/null +++ b/Documentation/devicetree/bindings/display/fsl,tcon.txt @@ -0,0 +1,18 @@ +Device Tree bindings for Freescale TCON Driver + +Required properties: +- compatible: Should be one of + * "fsl,vf610-tcon". + +- reg: Address and length of the register set for tcon. +- clocks: From common clock binding: handle to tcon ipg clock. +- clock-names: From common clock binding: Shall be "ipg". + +Examples: +timing-controller@4003d000 { + compatible = "fsl,vf610-tcon"; + reg = <0x4003d000 0x1000>; + clocks = <&clks VF610_CLK_TCON0>; + clock-names = "ipg"; + status = "okay"; +}; diff --git a/Documentation/devicetree/bindings/display/hisilicon/dw-dsi.txt b/Documentation/devicetree/bindings/display/hisilicon/dw-dsi.txt new file mode 100644 index 000000000000..d270bfe4e4e0 --- /dev/null +++ b/Documentation/devicetree/bindings/display/hisilicon/dw-dsi.txt @@ -0,0 +1,72 @@ +Device-Tree bindings for DesignWare DSI Host Controller v1.20a driver + +A DSI Host Controller resides in the middle of display controller and external +HDMI converter or panel. + +Required properties: +- compatible: value should be "hisilicon,hi6220-dsi". +- reg: physical base address and length of dsi controller's registers. +- clocks: contains APB clock phandle + clock-specifier pair. +- clock-names: should be "pclk". +- ports: contains DSI controller input and output sub port. + The input port connects to ADE output port with the reg value "0". + The output port with the reg value "1", it could connect to panel or + any other bridge endpoints. + See Documentation/devicetree/bindings/graph.txt for more device graph info. + +A example of HiKey board hi6220 SoC and board specific DT entry: +Example: + +SoC specific: + dsi: dsi@f4107800 { + compatible = "hisilicon,hi6220-dsi"; + reg = <0x0 0xf4107800 0x0 0x100>; + clocks = <&media_ctrl HI6220_DSI_PCLK>; + clock-names = "pclk"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* 0 for input port */ + port@0 { + reg = <0>; + dsi_in: endpoint { + remote-endpoint = <&ade_out>; + }; + }; + }; + }; + + +Board specific: + &dsi { + status = "ok"; + + ports { + /* 1 for output port */ + port@1 { + reg = <1>; + + dsi_out0: endpoint@0 { + remote-endpoint = <&adv7533_in>; + }; + }; + }; + }; + + &i2c2 { + ... + + adv7533: adv7533@39 { + ... + + port { + adv7533_in: endpoint { + remote-endpoint = <&dsi_out0>; + }; + }; + }; + }; + diff --git a/Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt b/Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt new file mode 100644 index 000000000000..38dc9d60eef8 --- /dev/null +++ b/Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt @@ -0,0 +1,64 @@ +Device-Tree bindings for hisilicon ADE display controller driver + +ADE (Advanced Display Engine) is the display controller which grab image +data from memory, do composition, do post image processing, generate RGB +timing stream and transfer to DSI. + +Required properties: +- compatible: value should be "hisilicon,hi6220-ade". +- reg: physical base address and length of the ADE controller's registers. +- hisilicon,noc-syscon: ADE NOC QoS syscon. +- resets: The ADE reset controller node. +- interrupt: the ldi vblank interrupt number used. +- clocks: a list of phandle + clock-specifier pairs, one for each entry + in clock-names. +- clock-names: should contain: + "clk_ade_core" for the ADE core clock. + "clk_codec_jpeg" for the media NOC QoS clock, which use the same clock with + jpeg codec. + "clk_ade_pix" for the ADE pixel clok. +- assigned-clocks: Should contain "clk_ade_core" and "clk_codec_jpeg" clocks' + phandle + clock-specifier pairs. +- assigned-clock-rates: clock rates, one for each entry in assigned-clocks. + The rate of "clk_ade_core" could be "360000000" or "180000000"; + The rate of "clk_codec_jpeg" could be or less than "1440000000". + These rate values could be configured according to performance and power + consumption. +- port: the output port. This contains one endpoint subnode, with its + remote-endpoint set to the phandle of the connected DSI input endpoint. + See Documentation/devicetree/bindings/graph.txt for more device graph info. + +Optional properties: +- dma-coherent: Present if dma operations are coherent. + + +A example of HiKey board hi6220 SoC specific DT entry: +Example: + + ade: ade@f4100000 { + compatible = "hisilicon,hi6220-ade"; + reg = <0x0 0xf4100000 0x0 0x7800>; + reg-names = "ade_base"; + hisilicon,noc-syscon = <&medianoc_ade>; + resets = <&media_ctrl MEDIA_ADE>; + interrupts = <0 115 4>; /* ldi interrupt */ + + clocks = <&media_ctrl HI6220_ADE_CORE>, + <&media_ctrl HI6220_CODEC_JPEG>, + <&media_ctrl HI6220_ADE_PIX_SRC>; + /*clock name*/ + clock-names = "clk_ade_core", + "clk_codec_jpeg", + "clk_ade_pix"; + + assigned-clocks = <&media_ctrl HI6220_ADE_CORE>, + <&media_ctrl HI6220_CODEC_JPEG>; + assigned-clock-rates = <360000000>, <288000000>; + dma-coherent; + + port { + ade_out: endpoint { + remote-endpoint = <&dsi_in>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt new file mode 100644 index 000000000000..db6e77edbea8 --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt @@ -0,0 +1,203 @@ +Mediatek display subsystem +========================== + +The Mediatek display subsystem consists of various DISP function blocks in the +MMSYS register space. The connections between them can be configured by output +and input selectors in the MMSYS_CONFIG register space. Pixel clock and start +of frame signal are distributed to the other function blocks by a DISP_MUTEX +function block. + +All DISP device tree nodes must be siblings to the central MMSYS_CONFIG node. +For a description of the MMSYS_CONFIG binding, see +Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt. + +DISP function blocks +==================== + +A display stream starts at a source function block that reads pixel data from +memory and ends with a sink function block that drives pixels on a display +interface, or writes pixels back to memory. All DISP function blocks have +their own register space, interrupt, and clock gate. The blocks that can +access memory additionally have to list the IOMMU and local arbiter they are +connected to. + +For a description of the display interface sink function blocks, see +Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt and +Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt. + +Required properties (all function blocks): +- compatible: "mediatek,<chip>-disp-<function>", one of + "mediatek,<chip>-disp-ovl" - overlay (4 layers, blending, csc) + "mediatek,<chip>-disp-rdma" - read DMA / line buffer + "mediatek,<chip>-disp-wdma" - write DMA + "mediatek,<chip>-disp-color" - color processor + "mediatek,<chip>-disp-aal" - adaptive ambient light controller + "mediatek,<chip>-disp-gamma" - gamma correction + "mediatek,<chip>-disp-merge" - merge streams from two RDMA sources + "mediatek,<chip>-disp-split" - split stream to two encoders + "mediatek,<chip>-disp-ufoe" - data compression engine + "mediatek,<chip>-dsi" - DSI controller, see mediatek,dsi.txt + "mediatek,<chip>-dpi" - DPI controller, see mediatek,dpi.txt + "mediatek,<chip>-disp-mutex" - display mutex + "mediatek,<chip>-disp-od" - overdrive +- reg: Physical base address and length of the function block register space +- interrupts: The interrupt signal from the function block (required, except for + merge and split function blocks). +- clocks: device clocks + See Documentation/devicetree/bindings/clock/clock-bindings.txt for details. + For most function blocks this is just a single clock input. Only the DSI and + DPI controller nodes have multiple clock inputs. These are documented in + mediatek,dsi.txt and mediatek,dpi.txt, respectively. + +Required properties (DMA function blocks): +- compatible: Should be one of + "mediatek,<chip>-disp-ovl" + "mediatek,<chip>-disp-rdma" + "mediatek,<chip>-disp-wdma" +- larb: Should contain a phandle pointing to the local arbiter device as defined + in Documentation/devicetree/bindings/soc/mediatek/mediatek,smi-larb.txt +- iommus: Should point to the respective IOMMU block with master port as + argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt + for details. + +Examples: + +mmsys: clock-controller@14000000 { + compatible = "mediatek,mt8173-mmsys", "syscon"; + reg = <0 0x14000000 0 0x1000>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + #clock-cells = <1>; +}; + +ovl0: ovl@1400c000 { + compatible = "mediatek,mt8173-disp-ovl"; + reg = <0 0x1400c000 0 0x1000>; + interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_OVL0>; + iommus = <&iommu M4U_PORT_DISP_OVL0>; + mediatek,larb = <&larb0>; +}; + +ovl1: ovl@1400d000 { + compatible = "mediatek,mt8173-disp-ovl"; + reg = <0 0x1400d000 0 0x1000>; + interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_OVL1>; + iommus = <&iommu M4U_PORT_DISP_OVL1>; + mediatek,larb = <&larb4>; +}; + +rdma0: rdma@1400e000 { + compatible = "mediatek,mt8173-disp-rdma"; + reg = <0 0x1400e000 0 0x1000>; + interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_RDMA0>; + iommus = <&iommu M4U_PORT_DISP_RDMA0>; + mediatek,larb = <&larb0>; +}; + +rdma1: rdma@1400f000 { + compatible = "mediatek,mt8173-disp-rdma"; + reg = <0 0x1400f000 0 0x1000>; + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_RDMA1>; + iommus = <&iommu M4U_PORT_DISP_RDMA1>; + mediatek,larb = <&larb4>; +}; + +rdma2: rdma@14010000 { + compatible = "mediatek,mt8173-disp-rdma"; + reg = <0 0x14010000 0 0x1000>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_RDMA2>; + iommus = <&iommu M4U_PORT_DISP_RDMA2>; + mediatek,larb = <&larb4>; +}; + +wdma0: wdma@14011000 { + compatible = "mediatek,mt8173-disp-wdma"; + reg = <0 0x14011000 0 0x1000>; + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_WDMA0>; + iommus = <&iommu M4U_PORT_DISP_WDMA0>; + mediatek,larb = <&larb0>; +}; + +wdma1: wdma@14012000 { + compatible = "mediatek,mt8173-disp-wdma"; + reg = <0 0x14012000 0 0x1000>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_WDMA1>; + iommus = <&iommu M4U_PORT_DISP_WDMA1>; + mediatek,larb = <&larb4>; +}; + +color0: color@14013000 { + compatible = "mediatek,mt8173-disp-color"; + reg = <0 0x14013000 0 0x1000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_COLOR0>; +}; + +color1: color@14014000 { + compatible = "mediatek,mt8173-disp-color"; + reg = <0 0x14014000 0 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_COLOR1>; +}; + +aal@14015000 { + compatible = "mediatek,mt8173-disp-aal"; + reg = <0 0x14015000 0 0x1000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_AAL>; +}; + +gamma@14016000 { + compatible = "mediatek,mt8173-disp-gamma"; + reg = <0 0x14016000 0 0x1000>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_GAMMA>; +}; + +ufoe@1401a000 { + compatible = "mediatek,mt8173-disp-ufoe"; + reg = <0 0x1401a000 0 0x1000>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_UFOE>; +}; + +dsi0: dsi@1401b000 { + /* See mediatek,dsi.txt for details */ +}; + +dpi0: dpi@1401d000 { + /* See mediatek,dpi.txt for details */ +}; + +mutex: mutex@14020000 { + compatible = "mediatek,mt8173-disp-mutex"; + reg = <0 0x14020000 0 0x1000>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_MUTEX_32K>; +}; + +od@14023000 { + compatible = "mediatek,mt8173-disp-od"; + reg = <0 0x14023000 0 0x1000>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_OD>; +}; diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt new file mode 100644 index 000000000000..b6a7e7397b8b --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt @@ -0,0 +1,35 @@ +Mediatek DPI Device +=================== + +The Mediatek DPI function block is a sink of the display subsystem and +provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a parallel +output bus. + +Required properties: +- compatible: "mediatek,<chip>-dpi" +- reg: Physical base address and length of the controller's registers +- interrupts: The interrupt signal from the function block. +- clocks: device clocks + See Documentation/devicetree/bindings/clock/clock-bindings.txt for details. +- clock-names: must contain "pixel", "engine", and "pll" +- port: Output port node with endpoint definitions as described in + Documentation/devicetree/bindings/graph.txt. This port should be connected + to the input port of an attached HDMI or LVDS encoder chip. + +Example: + +dpi0: dpi@1401d000 { + compatible = "mediatek,mt8173-dpi"; + reg = <0 0x1401d000 0 0x1000>; + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>; + clocks = <&mmsys CLK_MM_DPI_PIXEL>, + <&mmsys CLK_MM_DPI_ENGINE>, + <&apmixedsys CLK_APMIXED_TVDPLL>; + clock-names = "pixel", "engine", "pll"; + + port { + dpi0_out: endpoint { + remote-endpoint = <&hdmi0_in>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt new file mode 100644 index 000000000000..2b1585a34b85 --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt @@ -0,0 +1,60 @@ +Mediatek DSI Device +=================== + +The Mediatek DSI function block is a sink of the display subsystem and can +drive up to 4-lane MIPI DSI output. Two DSIs can be synchronized for dual- +channel output. + +Required properties: +- compatible: "mediatek,<chip>-dsi" +- reg: Physical base address and length of the controller's registers +- interrupts: The interrupt signal from the function block. +- clocks: device clocks + See Documentation/devicetree/bindings/clock/clock-bindings.txt for details. +- clock-names: must contain "engine", "digital", and "hs" +- phys: phandle link to the MIPI D-PHY controller. +- phy-names: must contain "dphy" +- port: Output port node with endpoint definitions as described in + Documentation/devicetree/bindings/graph.txt. This port should be connected + to the input port of an attached DSI panel or DSI-to-eDP encoder chip. + +MIPI TX Configuration Module +============================ + +The MIPI TX configuration module controls the MIPI D-PHY. + +Required properties: +- compatible: "mediatek,<chip>-mipi-tx" +- reg: Physical base address and length of the controller's registers +- clocks: PLL reference clock +- clock-output-names: name of the output clock line to the DSI encoder +- #clock-cells: must be <0>; +- #phy-cells: must be <0>. + +Example: + +mipi_tx0: mipi-dphy@10215000 { + compatible = "mediatek,mt8173-mipi-tx"; + reg = <0 0x10215000 0 0x1000>; + clocks = <&clk26m>; + clock-output-names = "mipi_tx0_pll"; + #clock-cells = <0>; + #phy-cells = <0>; +}; + +dsi0: dsi@1401b000 { + compatible = "mediatek,mt8173-dsi"; + reg = <0 0x1401b000 0 0x1000>; + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_LOW>; + clocks = <&mmsys MM_DSI0_ENGINE>, <&mmsys MM_DSI0_DIGITAL>, + <&mipi_tx0>; + clock-names = "engine", "digital", "hs"; + phys = <&mipi_tx0>; + phy-names = "dphy"; + + port { + dsi0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/display/panel/innolux,at070tn92.txt b/Documentation/devicetree/bindings/display/panel/innolux,at070tn92.txt new file mode 100644 index 000000000000..3e10cd782491 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/innolux,at070tn92.txt @@ -0,0 +1,7 @@ +Innolux AT070TN92 7.0" WQVGA TFT LCD panel + +Required properties: +- compatible: should be "innolux,at070tn92" + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino-43-ts.txt b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino-43-ts.txt new file mode 100644 index 000000000000..74540a090669 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino-43-ts.txt @@ -0,0 +1,7 @@ +Olimex 4.3" TFT LCD panel + +Required properties: +- compatible: should be "olimex,lcd-olinuxino-43-ts" + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/ontat,yx700wv03.txt b/Documentation/devicetree/bindings/display/panel/ontat,yx700wv03.txt new file mode 100644 index 000000000000..3d8a5e029242 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/ontat,yx700wv03.txt @@ -0,0 +1,7 @@ +On Tat Industrial Company 7" DPI TFT panel. + +Required properties: +- compatible: should be "ontat,yx700wv03" + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/tpk,f07a-0102.txt b/Documentation/devicetree/bindings/display/panel/tpk,f07a-0102.txt new file mode 100644 index 000000000000..a2613b9675df --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/tpk,f07a-0102.txt @@ -0,0 +1,8 @@ +TPK U.S.A. LLC Fusion 7" integrated projected capacitive touch display with, +800 x 480 (WVGA) LCD panel. + +Required properties: +- compatible: should be "tpk,f07a-0102" + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/tpk,f10a-0102.txt b/Documentation/devicetree/bindings/display/panel/tpk,f10a-0102.txt new file mode 100644 index 000000000000..b9d051196ba9 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/tpk,f10a-0102.txt @@ -0,0 +1,8 @@ +TPK U.S.A. LLC Fusion 10.1" integrated projected capacitive touch display with, +1024 x 600 (WSVGA) LCD panel. + +Required properties: +- compatible: should be "tpk,f10a-0102" + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt new file mode 100644 index 000000000000..e832ff98fd61 --- /dev/null +++ b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt @@ -0,0 +1,92 @@ +Rockchip RK3288 specific extensions to the Analogix Display Port +================================ + +Required properties: +- compatible: "rockchip,rk3288-edp"; + +- reg: physical base address of the controller and length + +- clocks: from common clock binding: handle to dp clock. + of memory mapped region. + +- clock-names: from common clock binding: + Required elements: "dp" "pclk" + +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + +- pinctrl-names: Names corresponding to the chip hotplug pinctrl states. +- pinctrl-0: pin-control mode. should be <&edp_hpd> + +- reset-names: Must include the name "dp" + +- rockchip,grf: this soc should set GRF regs, so need get grf here. + +- ports: there are 2 port nodes with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + Port 0: contained 2 endpoints, connecting to the output of vop. + Port 1: contained 1 endpoint, connecting to the input of panel. + +For the below properties, please refer to Analogix DP binding document: + * Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt +- phys (required) +- phy-names (required) +- hpd-gpios (optional) +- force-hpd (optional) +------------------------------------------------------------------------------- + +Example: + dp-controller: dp@ff970000 { + compatible = "rockchip,rk3288-dp"; + reg = <0xff970000 0x4000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>; + clock-names = "dp", "pclk"; + phys = <&dp_phy>; + phy-names = "dp"; + + rockchip,grf = <&grf>; + resets = <&cru 111>; + reset-names = "dp"; + + pinctrl-names = "default"; + pinctrl-0 = <&edp_hpd>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + edp_in: port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + edp_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_edp>; + }; + edp_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_edp>; + }; + }; + + edp_out: port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + edp_out_panel: endpoint { + reg = <0>; + remote-endpoint = <&panel_in_edp> + }; + }; + }; + }; + + pinctrl { + edp { + edp_hpd: edp-hpd { + rockchip,pins = <7 11 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/snps,arcpgu.txt b/Documentation/devicetree/bindings/display/snps,arcpgu.txt new file mode 100644 index 000000000000..c5c7dfd37df2 --- /dev/null +++ b/Documentation/devicetree/bindings/display/snps,arcpgu.txt @@ -0,0 +1,35 @@ +ARC PGU + +This is a display controller found on several development boards produced +by Synopsys. The ARC PGU is an RGB streamer that reads the data from a +framebuffer and sends it to a single digital encoder (usually HDMI). + +Required properties: + - compatible: "snps,arcpgu" + - reg: Physical base address and length of the controller's registers. + - clocks: A list of phandle + clock-specifier pairs, one for each + entry in 'clock-names'. + - clock-names: A list of clock names. For ARC PGU it should contain: + - "pxlclk" for the clock feeding the output PLL of the controller. + +Required sub-nodes: + - port: The PGU connection to an encoder chip. + +Example: + +/ { + ... + + pgu@XXXXXXXX { + compatible = "snps,arcpgu"; + reg = <0xXXXXXXXX 0x400>; + clocks = <&clock_node>; + clock-names = "pxlclk"; + + port { + pgu_output: endpoint { + remote-endpoint = <&hdmi_enc_input>; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt new file mode 100644 index 000000000000..df8f4aeefe4c --- /dev/null +++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt @@ -0,0 +1,258 @@ +Allwinner A10 Display Pipeline +============================== + +The Allwinner A10 Display pipeline is composed of several components +that are going to be documented below: + +TV Encoder +---------- + +The TV Encoder supports the composite and VGA output. It is one end of +the pipeline. + +Required properties: + - compatible: value should be "allwinner,sun4i-a10-tv-encoder". + - reg: base address and size of memory-mapped region + - clocks: the clocks driving the TV encoder + - resets: phandle to the reset controller driving the encoder + +- ports: A ports node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. The + first port should be the input endpoint. + +TCON +---- + +The TCON acts as a timing controller for RGB, LVDS and TV interfaces. + +Required properties: + - compatible: value should be "allwinner,sun5i-a13-tcon". + - reg: base address and size of memory-mapped region + - interrupts: interrupt associated to this IP + - clocks: phandles to the clocks feeding the TCON. Three are needed: + - 'ahb': the interface clocks + - 'tcon-ch0': The clock driving the TCON channel 0 + - 'tcon-ch1': The clock driving the TCON channel 1 + - resets: phandles to the reset controllers driving the encoder + - "lcd": the reset line for the TCON channel 0 + + - clock-names: the clock names mentioned above + - reset-names: the reset names mentioned above + - clock-output-names: Name of the pixel clock created + +- ports: A ports node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. The + first port should be the input endpoint, the second one the output + + The output should have two endpoints. The first is the block + connected to the TCON channel 0 (usually a panel or a bridge), the + second the block connected to the TCON channel 1 (usually the TV + encoder) + + +Display Engine Backend +---------------------- + +The display engine backend exposes layers and sprites to the +system. + +Required properties: + - compatible: value must be one of: + * allwinner,sun5i-a13-display-backend + - reg: base address and size of the memory-mapped region. + - clocks: phandles to the clocks feeding the frontend and backend + * ahb: the backend interface clock + * mod: the backend module clock + * ram: the backend DRAM clock + - clock-names: the clock names mentioned above + - resets: phandles to the reset controllers driving the backend + +- ports: A ports node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. The + first port should be the input endpoints, the second one the output + +Display Engine Frontend +----------------------- + +The display engine frontend does formats conversion, scaling, +deinterlacing and color space conversion. + +Required properties: + - compatible: value must be one of: + * allwinner,sun5i-a13-display-frontend + - reg: base address and size of the memory-mapped region. + - interrupts: interrupt associated to this IP + - clocks: phandles to the clocks feeding the frontend and backend + * ahb: the backend interface clock + * mod: the backend module clock + * ram: the backend DRAM clock + - clock-names: the clock names mentioned above + - resets: phandles to the reset controllers driving the backend + +- ports: A ports node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. The + first port should be the input endpoints, the second one the outputs + + +Display Engine Pipeline +----------------------- + +The display engine pipeline (and its entry point, since it can be +either directly the backend or the frontend) is represented as an +extra node. + +Required properties: + - compatible: value must be one of: + * allwinner,sun5i-a13-display-engine + + - allwinner,pipelines: list of phandle to the display engine + frontends available. + +Example: + +panel: panel { + compatible = "olimex,lcd-olinuxino-43-ts"; + #address-cells = <1>; + #size-cells = <0>; + + port { + #address-cells = <1>; + #size-cells = <0>; + + panel_input: endpoint { + remote-endpoint = <&tcon0_out_panel>; + }; + }; +}; + +tve0: tv-encoder@01c0a000 { + compatible = "allwinner,sun4i-a10-tv-encoder"; + reg = <0x01c0a000 0x1000>; + clocks = <&ahb_gates 34>; + resets = <&tcon_ch0_clk 0>; + + port { + #address-cells = <1>; + #size-cells = <0>; + + tve0_in_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_tve0>; + }; + }; +}; + +tcon0: lcd-controller@1c0c000 { + compatible = "allwinner,sun5i-a13-tcon"; + reg = <0x01c0c000 0x1000>; + interrupts = <44>; + resets = <&tcon_ch0_clk 1>; + reset-names = "lcd"; + clocks = <&ahb_gates 36>, + <&tcon_ch0_clk>, + <&tcon_ch1_clk>; + clock-names = "ahb", + "tcon-ch0", + "tcon-ch1"; + clock-output-names = "tcon-pixel-clock"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon0_in_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_out_tcon0>; + }; + }; + + tcon0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tcon0_out_panel: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; + + tcon0_out_tve0: endpoint@1 { + reg = <1>; + remote-endpoint = <&tve0_in_tcon0>; + }; + }; + }; +}; + +fe0: display-frontend@1e00000 { + compatible = "allwinner,sun5i-a13-display-frontend"; + reg = <0x01e00000 0x20000>; + interrupts = <47>; + clocks = <&ahb_gates 46>, <&de_fe_clk>, + <&dram_gates 25>; + clock-names = "ahb", "mod", + "ram"; + resets = <&de_fe_clk>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + fe0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + fe0_out_be0: endpoint { + remote-endpoint = <&be0_in_fe0>; + }; + }; + }; +}; + +be0: display-backend@1e60000 { + compatible = "allwinner,sun5i-a13-display-backend"; + reg = <0x01e60000 0x10000>; + clocks = <&ahb_gates 44>, <&de_be_clk>, + <&dram_gates 26>; + clock-names = "ahb", "mod", + "ram"; + resets = <&de_be_clk>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + be0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + be0_in_fe0: endpoint@0 { + reg = <0>; + remote-endpoint = <&fe0_out_be0>; + }; + }; + + be0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + be0_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_be0>; + }; + }; + }; +}; + +display-engine { + compatible = "allwinner,sun5i-a13-display-engine"; + allwinner,pipelines = <&fe0>; +}; diff --git a/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt b/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt index 1396078d15ac..baf9b34d20bf 100644 --- a/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt +++ b/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt @@ -12,6 +12,10 @@ Required properties: - reg: Should contain DMA registers location and length. - interrupts: Should contain the DMA interrupts associated to the DMA channels in ascending order. +- interrupt-names: Should contain the names of the interrupt + in the form "dmaXX". + Use "dma-shared-all" for the common interrupt line + that is shared by all dma channels. - #dma-cells: Must be <1>, the cell in the dmas property of the client device represents the DREQ number. - brcm,dma-channel-mask: Bit mask representing the channels @@ -34,13 +38,35 @@ dma: dma@7e007000 { <1 24>, <1 25>, <1 26>, + /* dma channel 11-14 share one irq */ <1 27>, + <1 27>, + <1 27>, + <1 27>, + /* unused shared irq for all channels */ <1 28>; + interrupt-names = "dma0", + "dma1", + "dma2", + "dma3", + "dma4", + "dma5", + "dma6", + "dma7", + "dma8", + "dma9", + "dma10", + "dma11", + "dma12", + "dma13", + "dma14", + "dma-shared-all"; #dma-cells = <1>; brcm,dma-channel-mask = <0x7f35>; }; + DMA clients connected to the BCM2835 DMA controller must use the format described in the dma.txt file, using a two-cell specifier for each channel. diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt index dc8d3aac1aa9..175f0e44ed85 100644 --- a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt +++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt @@ -58,6 +58,15 @@ The third cell specifies the transfer priority as below. 1 Medium 2 Low +Optional properties: + +- gpr : The phandle to the General Purpose Register (GPR) node. +- fsl,sdma-event-remap : Register bits of sdma event remap, the format is + <reg shift val>. + reg is the GPR register offset. + shift is the bit position inside the GPR register. + val is the value of the bit (0 or 1). + Examples: sdma@83fb0000 { @@ -83,3 +92,21 @@ ssi2: ssi@70014000 { dma-names = "rx", "tx"; fsl,fifo-depth = <15>; }; + +Using the fsl,sdma-event-remap property: + +If we want to use SDMA on the SAI1 port on a MX6SX: + +&sdma { + gpr = <&gpr>; + /* SDMA events remap for SAI1_RX and SAI1_TX */ + fsl,sdma-event-remap = <0 15 1>, <0 16 1>; +}; + +The fsl,sdma-event-remap property in this case has two values: +- <0 15 1> means that the offset is 0, so GPR0 is the register of the +SDMA remap. Bit 15 of GPR0 selects between UART4_RX and SAI1_RX. +Setting bit 15 to 1 selects SAI1_RX. +- <0 16 1> means that the offset is 0, so GPR0 is the register of the +SDMA remap. Bit 16 of GPR0 selects between UART4_TX and SAI1_TX. +Setting bit 16 to 1 selects SAI1_TX. diff --git a/Documentation/devicetree/bindings/dma/mv-xor.txt b/Documentation/devicetree/bindings/dma/mv-xor.txt index 276ef815ef32..c075f5988135 100644 --- a/Documentation/devicetree/bindings/dma/mv-xor.txt +++ b/Documentation/devicetree/bindings/dma/mv-xor.txt @@ -1,7 +1,10 @@ * Marvell XOR engines Required properties: -- compatible: Should be "marvell,orion-xor" or "marvell,armada-380-xor" +- compatible: Should be one of the following: + - "marvell,orion-xor" + - "marvell,armada-380-xor" + - "marvell,armada-3700-xor". - reg: Should contain registers location and length (two sets) the first set is the low registers, the second set the high registers for the XOR engine. diff --git a/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt b/Documentation/devicetree/bindings/dma/nvidia,tegra20-apbdma.txt index c6908e7c42cc..c6908e7c42cc 100644 --- a/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt +++ b/Documentation/devicetree/bindings/dma/nvidia,tegra20-apbdma.txt diff --git a/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.txt b/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.txt new file mode 100644 index 000000000000..1e1dc8f972e4 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.txt @@ -0,0 +1,55 @@ +* NVIDIA Tegra Audio DMA (ADMA) controller + +The Tegra Audio DMA controller that is used for transferring data +between system memory and the Audio Processing Engine (APE). + +Required properties: +- compatible: Must be "nvidia,tegra210-adma". +- reg: Should contain DMA registers location and length. This should be + a single entry that includes all of the per-channel registers in one + contiguous bank. +- interrupt-parent: Phandle to the interrupt parent controller. +- interrupts: Should contain all of the per-channel DMA interrupts in + ascending order with respect to the DMA channel index. +- clocks: Must contain one entry for the ADMA module clock + (TEGRA210_CLK_D_AUDIO). +- clock-names: Must contain the name "d_audio" for the corresponding + 'clocks' entry. +- #dma-cells : Must be 1. The first cell denotes the receive/transmit + request number and should be between 1 and the maximum number of + requests supported. This value corresponds to the RX/TX_REQUEST_SELECT + fields in the ADMA_CHn_CTRL register. + + +Example: + +adma: dma@702e2000 { + compatible = "nvidia,tegra210-adma"; + reg = <0x0 0x702e2000 0x0 0x2000>; + interrupt-parent = <&tegra_agic>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_D_AUDIO>; + clock-names = "d_audio"; + #dma-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt index 1c9d48ea4914..9cbf5d9df8fd 100644 --- a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt +++ b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt @@ -13,6 +13,8 @@ Required properties: - clock-names: must contain "bam_clk" entry - qcom,ee : indicates the active Execution Environment identifier (0-7) used in the secure world. +- qcom,controlled-remotely : optional, indicates that the bam is controlled by + remote proccessor i.e. execution environment. Example: diff --git a/Documentation/devicetree/bindings/dma/snps-dma.txt b/Documentation/devicetree/bindings/dma/snps-dma.txt index c261598164a7..0f5583293c9c 100644 --- a/Documentation/devicetree/bindings/dma/snps-dma.txt +++ b/Documentation/devicetree/bindings/dma/snps-dma.txt @@ -13,6 +13,11 @@ Required properties: - chan_priority: priority of channels. 0 (default): increase from chan 0->n, 1: increase from chan n->0 - block_size: Maximum block size supported by the controller +- data-width: Maximum data width supported by hardware per AHB master + (in bytes, power of 2) + + +Deprecated properties: - data_width: Maximum data width supported by hardware per AHB master (0 - 8bits, 1 - 16bits, ..., 5 - 256bits) @@ -38,7 +43,7 @@ Example: chan_allocation_order = <1>; chan_priority = <1>; block_size = <0xfff>; - data_width = <3 3>; + data-width = <8 8>; }; DMA clients connected to the Designware DMA controller must use the format @@ -47,8 +52,8 @@ The four cells in order are: 1. A phandle pointing to the DMA controller 2. The DMA request line number -3. Source master for transfers on allocated channel -4. Destination master for transfers on allocated channel +3. Memory master for transfers on allocated channel +4. Peripheral master for transfers on allocated channel Example: diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt index 2291c4098730..3cf0072d3141 100644 --- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt +++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt @@ -7,7 +7,7 @@ Required properties: - compatible: Should be "xlnx,axi-dma-1.00.a" - #dma-cells: Should be <1>, see "dmas" property below - reg: Should contain DMA registers location and length. -- dma-channel child node: Should have atleast one channel and can have upto +- dma-channel child node: Should have at least one channel and can have up to two channels per device. This node specifies the properties of each DMA channel (see child node properties below). diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt index e4c4d47f8137..a1f2683c49bf 100644 --- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt +++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt @@ -3,18 +3,44 @@ It can be configured to have one channel or two channels. If configured as two channels, one is to transmit to the video device and another is to receive from the video device. +Xilinx AXI DMA engine, it does transfers between memory and AXI4 stream +target devices. It can be configured to have one channel or two channels. +If configured as two channels, one is to transmit to the device and another +is to receive from the device. + +Xilinx AXI CDMA engine, it does transfers between memory-mapped source +address and a memory-mapped destination address. + Required properties: -- compatible: Should be "xlnx,axi-vdma-1.00.a" +- compatible: Should be "xlnx,axi-vdma-1.00.a" or "xlnx,axi-dma-1.00.a" or + "xlnx,axi-cdma-1.00.a"" - #dma-cells: Should be <1>, see "dmas" property below - reg: Should contain VDMA registers location and length. -- xlnx,num-fstores: Should be the number of framebuffers as configured in h/w. +- xlnx,addrwidth: Should be the vdma addressing size in bits(ex: 32 bits). +- dma-ranges: Should be as the following <dma_addr cpu_addr max_len>. - dma-channel child node: Should have at least one channel and can have up to two channels per device. This node specifies the properties of each DMA channel (see child node properties below). +- clocks: Input clock specifier. Refer to common clock bindings. +- clock-names: List of input clocks + For VDMA: + Required elements: "s_axi_lite_aclk" + Optional elements: "m_axi_mm2s_aclk" "m_axi_s2mm_aclk", + "m_axis_mm2s_aclk", "s_axis_s2mm_aclk" + For CDMA: + Required elements: "s_axi_lite_aclk", "m_axi_aclk" + FOR AXIDMA: + Required elements: "s_axi_lite_aclk" + Optional elements: "m_axi_mm2s_aclk", "m_axi_s2mm_aclk", + "m_axi_sg_aclk" + +Required properties for VDMA: +- xlnx,num-fstores: Should be the number of framebuffers as configured in h/w. Optional properties: - xlnx,include-sg: Tells configured for Scatter-mode in the hardware. +Optional properties for VDMA: - xlnx,flush-fsync: Tells which channel to Flush on Frame sync. It takes following values: {1}, flush both channels @@ -31,6 +57,7 @@ Required child node properties: Optional child node properties: - xlnx,include-dre: Tells hardware is configured for Data Realignment Engine. +Optional child node properties for VDMA: - xlnx,genlock-mode: Tells Genlock synchronization is enabled/disabled in hardware. @@ -41,8 +68,13 @@ axi_vdma_0: axivdma@40030000 { compatible = "xlnx,axi-vdma-1.00.a"; #dma_cells = <1>; reg = < 0x40030000 0x10000 >; + dma-ranges = <0x00000000 0x00000000 0x40000000>; xlnx,num-fstores = <0x8>; xlnx,flush-fsync = <0x1>; + xlnx,addrwidth = <0x20>; + clocks = <&clk 0>, <&clk 1>, <&clk 2>, <&clk 3>, <&clk 4>; + clock-names = "s_axi_lite_aclk", "m_axi_mm2s_aclk", "m_axi_s2mm_aclk", + "m_axis_mm2s_aclk", "s_axis_s2mm_aclk"; dma-channel@40030000 { compatible = "xlnx,axi-vdma-mm2s-channel"; interrupts = < 0 54 4 >; diff --git a/Documentation/devicetree/bindings/gpio/gpio-74x164.txt b/Documentation/devicetree/bindings/gpio/gpio-74x164.txt index cc2608021f26..ce1b2231bf5d 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-74x164.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-74x164.txt @@ -1,7 +1,9 @@ * Generic 8-bits shift register GPIO driver Required properties: -- compatible : Should be "fairchild,74hc595" +- compatible: Should contain one of the following: + "fairchild,74hc595" + "nxp,74lvc594" - reg : chip select number - gpio-controller : Marks the device node as a gpio controller. - #gpio-cells : Should be two. The first cell is the pin number and diff --git a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt index 120bc4971cf3..4b6cc632ca5c 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt @@ -1,9 +1,10 @@ -* Freescale MPC512x/MPC8xxx/Layerscape GPIO controller +* Freescale MPC512x/MPC8xxx/QorIQ/Layerscape GPIO controller Required properties: - compatible : Should be "fsl,<soc>-gpio" The following <soc>s are known to be supported: - mpc5121, mpc5125, mpc8349, mpc8572, mpc8610, pq3, qoriq. + mpc5121, mpc5125, mpc8349, mpc8572, mpc8610, pq3, qoriq, + ls1021a, ls1043a, ls2080a. - reg : Address and length of the register set for the device - interrupts : Should be the port interrupt shared by all 32 pins. - #gpio-cells : Should be two. The first cell is the pin number and @@ -15,7 +16,7 @@ Optional properties: - little-endian : GPIO registers are used as little endian. If not present registers are used as big endian by default. -Example: +Example of gpio-controller node for a mpc5125 SoC: gpio0: gpio@1100 { compatible = "fsl,mpc5125-gpio"; @@ -24,3 +25,16 @@ gpio0: gpio@1100 { interrupts = <78 0x8>; status = "okay"; }; + +Example of gpio-controller node for a ls2080a SoC: + +gpio0: gpio@2300000 { + compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio"; + reg = <0x0 0x2300000 0x0 0x10000>; + interrupts = <0 36 0x4>; /* Level high type */ + gpio-controller; + little-endian; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; +}; diff --git a/Documentation/devicetree/bindings/gpio/gpio-xlp.txt b/Documentation/devicetree/bindings/gpio/gpio-xlp.txt index 262ee4ddf2cb..28662d83a43e 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-xlp.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-xlp.txt @@ -3,6 +3,8 @@ Netlogic XLP Family GPIO This GPIO driver is used for following Netlogic XLP SoCs: XLP832, XLP316, XLP208, XLP980, XLP532 +This GPIO driver is also compatible with GPIO controller found on +Broadcom Vulcan ARM64. Required properties: ------------------- @@ -13,6 +15,7 @@ Required properties: - "netlogic,xlp208-gpio": For Netlogic XLP208 - "netlogic,xlp980-gpio": For Netlogic XLP980 - "netlogic,xlp532-gpio": For Netlogic XLP532 + - "brcm,vulcan-gpio": For Broadcom Vulcan ARM64 - reg: Physical base address and length of the controller's registers. - #gpio-cells: Should be two. The first cell is the pin number and the second cell is used to specify optional parameters (currently unused). diff --git a/Documentation/devicetree/bindings/gpio/gpio.txt b/Documentation/devicetree/bindings/gpio/gpio.txt index 069cdf6f9dac..68d28f62a6f4 100644 --- a/Documentation/devicetree/bindings/gpio/gpio.txt +++ b/Documentation/devicetree/bindings/gpio/gpio.txt @@ -131,6 +131,13 @@ Every GPIO controller node must contain both an empty "gpio-controller" property, and a #gpio-cells integer property, which indicates the number of cells in a gpio-specifier. +Some system-on-chips (SoCs) use the concept of GPIO banks. A GPIO bank is an +instance of a hardware IP core on a silicon die, usually exposed to the +programmer as a coherent range of I/O addresses. Usually each such bank is +exposed in the device tree as an individual gpio-controller node, reflecting +the fact that the hardware was synthesized by reusing the same IP block a +few times over. + Optionally, a GPIO controller may have a "ngpios" property. This property indicates the number of in-use slots of available slots for GPIOs. The typical example is something like this: the hardware register is 32 bits @@ -145,6 +152,21 @@ additional bitmask is needed to specify which GPIOs are actually in use, and which are dummies. The bindings for this case has not yet been specified, but should be specified if/when such hardware appears. +Optionally, a GPIO controller may have a "gpio-line-names" property. This is +an array of strings defining the names of the GPIO lines going out of the +GPIO controller. This name should be the most meaningful producer name +for the system, such as a rail name indicating the usage. Package names +such as pin name are discouraged: such lines have opaque names (since they +are by definition generic purpose) and such names are usually not very +helpful. For example "MMC-CD", "Red LED Vdd" and "ethernet reset" are +reasonable line names as they describe what the line is used for. "GPIO0" +is not a good name to give to a GPIO line. Placeholders are discouraged: +rather use the "" (blank string) if the use of the GPIO line is undefined +in your design. The names are assigned starting from line offset 0 from +left to right from the passed array. An incomplete array (where the number +of passed named are less than ngpios) will still be used up until the last +provided valid line index. + Example: gpio-controller@00000000 { @@ -153,6 +175,10 @@ gpio-controller@00000000 { gpio-controller; #gpio-cells = <2>; ngpios = <18>; + gpio-line-names = "MMC-CD", "MMC-WP", "VDD eth", "RST eth", "LED R", + "LED G", "LED B", "Col A", "Col B", "Col C", "Col D", + "Row A", "Row B", "Row C", "Row D", "NMI button", + "poweroff", "reset"; } The GPIO chip may contain GPIO hog definitions. GPIO hogging is a mechanism diff --git a/Documentation/devicetree/bindings/gpio/ibm,ppc4xx-gpio.txt b/Documentation/devicetree/bindings/gpio/ibm,ppc4xx-gpio.txt new file mode 100644 index 000000000000..d58b3958f3ea --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/ibm,ppc4xx-gpio.txt @@ -0,0 +1,24 @@ +* IBM/AMCC/APM GPIO Controller for PowerPC 4XX series and compatible SoCs + +All GPIOs are pin-shared with other functions. DCRs control whether a +particular pin that has GPIO capabilities acts as a GPIO or is used for +another purpose. GPIO outputs are separately programmable to emulate +an open-drain driver. + +Required properties: + - compatible: must be "ibm,ppc4xx-gpio" + - reg: address and length of the register set for the device + - #gpio-cells: must be set to 2. The first cell is the pin number + and the second cell is used to specify the gpio polarity: + 0 = active high + 1 = active low + - gpio-controller: marks the device node as a gpio controller. + +Example: + +GPIO0: gpio@ef600b00 { + compatible = "ibm,ppc4xx-gpio"; + reg = <0xef600b00 0x00000048>; + #gpio-cells = <2>; + gpio-controller; +}; diff --git a/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.txt b/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.txt new file mode 100644 index 000000000000..c82a2e221bc1 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.txt @@ -0,0 +1,161 @@ +NVIDIA Tegra186 GPIO controllers + +Tegra186 contains two GPIO controllers; a main controller and an "AON" +controller. This binding document applies to both controllers. The register +layouts for the controllers share many similarities, but also some significant +differences. Hence, this document describes closely related but different +bindings and compatible values. + +The Tegra186 GPIO controller allows software to set the IO direction of, and +read/write the value of, numerous GPIO signals. Routing of GPIO signals to +package balls is under the control of a separate pin controller HW block. Two +major sets of registers exist: + +a) Security registers, which allow configuration of allowed access to the GPIO +register set. These registers exist in a single contiguous block of physical +address space. The size of this block, and the security features available, +varies between the different GPIO controllers. + +Access to this set of registers is not necessary in all circumstances. Code +that wishes to configure access to the GPIO registers needs access to these +registers to do so. Code which simply wishes to read or write GPIO data does not +need access to these registers. + +b) GPIO registers, which allow manipulation of the GPIO signals. In some GPIO +controllers, these registers are exposed via multiple "physical aliases" in +address space, each of which access the same underlying state. See the hardware +documentation for rationale. Any particular GPIO client is expected to access +just one of these physical aliases. + +Tegra HW documentation describes a unified naming convention for all GPIOs +implemented by the SoC. Each GPIO is assigned to a port, and a port may control +a number of GPIOs. Thus, each GPIO is named according to an alphabetical port +name and an integer GPIO name within the port. For example, GPIO_PA0, GPIO_PN6, +or GPIO_PCC3. + +The number of ports implemented by each GPIO controller varies. The number of +implemented GPIOs within each port varies. GPIO registers within a controller +are grouped and laid out according to the port they affect. + +The mapping from port name to the GPIO controller that implements that port, and +the mapping from port name to register offset within a controller, are both +extremely non-linear. The header file <dt-bindings/gpio/tegra186-gpio.h> +describes the port-level mapping. In that file, the naming convention for ports +matches the HW documentation. The values chosen for the names are alphabetically +sorted within a particular controller. Drivers need to map between the DT GPIO +IDs and HW register offsets using a lookup table. + +Each GPIO controller can generate a number of interrupt signals. Each signal +represents the aggregate status for all GPIOs within a set of ports. Thus, the +number of interrupt signals generated by a controller varies as a rough function +of the number of ports it implements. Note that the HW documentation refers to +both the overall controller HW module and the sets-of-ports as "controllers". + +Each GPIO controller in fact generates multiple interrupts signals for each set +of ports. Each GPIO may be configured to feed into a specific one of the +interrupt signals generated by a set-of-ports. The intent is for each generated +signal to be routed to a different CPU, thus allowing different CPUs to each +handle subsets of the interrupts within a port. The status of each of these +per-port-set signals is reported via a separate register. Thus, a driver needs +to know which status register to observe. This binding currently defines no +configuration mechanism for this. By default, drivers should use register +GPIO_${port}_INTERRUPT_STATUS_G1_0. Future revisions to the binding could +define a property to configure this. + +Required properties: +- compatible + Array of strings. + One of: + - "nvidia,tegra186-gpio". + - "nvidia,tegra186-gpio-aon". +- reg-names + Array of strings. + Contains a list of names for the register spaces described by the reg + property. May contain the following entries, in any order: + - "gpio": Mandatory. GPIO control registers. This may cover either: + a) The single physical alias that this OS should use. + b) All physical aliases that exist in the controller. This is + appropriate when the OS is responsible for managing assignment of + the physical aliases. + - "security": Optional. Security configuration registers. + Users of this binding MUST look up entries in the reg property by name, + using this reg-names property to do so. +- reg + Array of (physical base address, length) tuples. + Must contain one entry per entry in the reg-names property, in a matching + order. +- interrupts + Array of interrupt specifiers. + The interrupt outputs from the HW block, one per set of ports, in the + order the HW manual describes them. The number of entries required varies + depending on compatible value: + - "nvidia,tegra186-gpio": 6 entries. + - "nvidia,tegra186-gpio-aon": 1 entry. +- gpio-controller + Boolean. + Marks the device node as a GPIO controller/provider. +- #gpio-cells + Single-cell integer. + Must be <2>. + Indicates how many cells are used in a consumer's GPIO specifier. + In the specifier: + - The first cell is the pin number. + See <dt-bindings/gpio/tegra186-gpio.h>. + - The second cell contains flags: + - Bit 0 specifies polarity + - 0: Active-high (normal). + - 1: Active-low (inverted). +- interrupt-controller + Boolean. + Marks the device node as an interrupt controller/provider. +- #interrupt-cells + Single-cell integer. + Must be <2>. + Indicates how many cells are used in a consumer's interrupt specifier. + In the specifier: + - The first cell is the GPIO number. + See <dt-bindings/gpio/tegra186-gpio.h>. + - The second cell is contains flags: + - Bits [3:0] indicate trigger type and level: + - 1: Low-to-high edge triggered. + - 2: High-to-low edge triggered. + - 4: Active high level-sensitive. + - 8: Active low level-sensitive. + Valid combinations are 1, 2, 3, 4, 8. + +Example: + +#include <dt-bindings/interrupt-controller/irq.h> + +gpio@2200000 { + compatible = "nvidia,tegra186-gpio"; + reg-names = "security", "gpio"; + reg = + <0x0 0x2200000 0x0 0x10000>, + <0x0 0x2210000 0x0 0x10000>; + interrupts = + <0 47 IRQ_TYPE_LEVEL_HIGH>, + <0 50 IRQ_TYPE_LEVEL_HIGH>, + <0 53 IRQ_TYPE_LEVEL_HIGH>, + <0 56 IRQ_TYPE_LEVEL_HIGH>, + <0 59 IRQ_TYPE_LEVEL_HIGH>, + <0 180 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; +}; + +gpio@c2f0000 { + compatible = "nvidia,tegra186-gpio-aon"; + reg-names = "security", "gpio"; + reg = + <0x0 0xc2f0000 0x0 0x1000>, + <0x0 0xc2f1000 0x0 0x1000>; + interrupts = + <0 60 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; +}; diff --git a/Documentation/devicetree/bindings/gpio/wd,mbl-gpio.txt b/Documentation/devicetree/bindings/gpio/wd,mbl-gpio.txt new file mode 100644 index 000000000000..038c3a6a1f4d --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/wd,mbl-gpio.txt @@ -0,0 +1,38 @@ +Bindings for the Western Digital's MyBook Live memory-mapped GPIO controllers. + +The Western Digital MyBook Live has two memory-mapped GPIO controllers. +Both GPIO controller only have a single 8-bit data register, where GPIO +state can be read and/or written. + +Required properties: + - compatible: should be "wd,mbl-gpio" + - reg-names: must contain + "dat" - data register + - reg: address + size pairs describing the GPIO register sets; + order must correspond with the order of entries in reg-names + - #gpio-cells: must be set to 2. The first cell is the pin number and + the second cell is used to specify the gpio polarity: + 0 = active high + 1 = active low + - gpio-controller: Marks the device node as a gpio controller. + +Optional properties: + - no-output: GPIOs are read-only. + +Examples: + gpio0: gpio0@e0000000 { + compatible = "wd,mbl-gpio"; + reg-names = "dat"; + reg = <0xe0000000 0x1>; + #gpio-cells = <2>; + gpio-controller; + }; + + gpio1: gpio1@e0100000 { + compatible = "wd,mbl-gpio"; + reg-names = "dat"; + reg = <0xe0100000 0x1>; + #gpio-cells = <2>; + gpio-controller; + no-output; + }; diff --git a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt index 23bfe8e1f7cc..ff3db65e50de 100644 --- a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt +++ b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt @@ -1,9 +1,10 @@ -NVIDIA GK20A Graphics Processing Unit +NVIDIA Tegra Graphics Processing Units Required properties: -- compatible: "nvidia,<chip>-<gpu>" +- compatible: "nvidia,<gpu>" Currently recognized values: - - nvidia,tegra124-gk20a + - nvidia,gk20a + - nvidia,gm20b - reg: Physical base address and length of the controller's registers. Must contain two entries: - first entry for bar0 @@ -19,14 +20,20 @@ Required properties: - clock-names: Must include the following entries: - gpu - pwr +If the compatible string is "nvidia,gm20b", then the following clock +is also required: + - ref - resets: Must contain an entry for each entry in reset-names. See ../reset/reset.txt for details. - reset-names: Must include the following entries: - gpu -Example: +Optional properties: +- iommus: A reference to the IOMMU. See ../iommu/iommu.txt for details. - gpu@0,57000000 { +Example for GK20A: + + gpu@57000000 { compatible = "nvidia,gk20a"; reg = <0x0 0x57000000 0x0 0x01000000>, <0x0 0x58000000 0x0 0x01000000>; @@ -39,5 +46,25 @@ Example: clock-names = "gpu", "pwr"; resets = <&tegra_car 184>; reset-names = "gpu"; + iommus = <&mc TEGRA_SWGROUP_GPU>; + status = "disabled"; + }; + +Example for GM20B: + + gpu@57000000 { + compatible = "nvidia,gm20b"; + reg = <0x0 0x57000000 0x0 0x01000000>, + <0x0 0x58000000 0x0 0x01000000>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "stall", "nonstall"; + clocks = <&tegra_car TEGRA210_CLK_GPU>, + <&tegra_car TEGRA210_CLK_PLL_P_OUT5>, + <&tegra_car TEGRA210_CLK_PLL_G_REF>; + clock-names = "gpu", "pwr", "ref"; + resets = <&tegra_car 184>; + reset-names = "gpu"; + iommus = <&mc TEGRA_SWGROUP_GPU>; status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/hwmon/ltc2978.txt b/Documentation/devicetree/bindings/hwmon/ltc2978.txt index a7afbf60bb9c..bf2a47bbdc58 100644 --- a/Documentation/devicetree/bindings/hwmon/ltc2978.txt +++ b/Documentation/devicetree/bindings/hwmon/ltc2978.txt @@ -13,6 +13,7 @@ Required properties: * "lltc,ltc3886" * "lltc,ltc3887" * "lltc,ltm2987" + * "lltc,ltm4675" * "lltc,ltm4676" - reg: I2C slave address diff --git a/Documentation/devicetree/bindings/i2c/i2c-octeon.txt b/Documentation/devicetree/bindings/i2c/i2c-octeon.txt index dced82ebe31d..872d485dffab 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-octeon.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-octeon.txt @@ -4,6 +4,12 @@ Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs. + or + + compatible: "cavium,octeon-7890-twsi" + + Compatibility with cn78XX SOCs. + - reg: The base address of the TWSI/I2C bus controller register bank. - #address-cells: Must be <1>. diff --git a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt index cf8bfc956cdc..5f0cb502b1db 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt @@ -19,6 +19,9 @@ Optional properties: - clock-frequency: desired I2C bus clock frequency in Hz. The absence of this property indicates the default frequency 100 kHz. - clocks: clock specifier. +- dmas: Must contain a list of two references to DMA specifiers, one for + transmission, and one for reception. +- dma-names: Must contain a list of two DMA names, "tx" and "rx". - i2c-scl-falling-time-ns: see i2c.txt - i2c-scl-internal-delay-ns: see i2c.txt diff --git a/Documentation/devicetree/bindings/iio/accel/mma8452.txt b/Documentation/devicetree/bindings/iio/accel/mma8452.txt index 165937e1ac1c..45f5c5c5929c 100644 --- a/Documentation/devicetree/bindings/iio/accel/mma8452.txt +++ b/Documentation/devicetree/bindings/iio/accel/mma8452.txt @@ -1,4 +1,4 @@ -Freescale MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC or MMA8653FC +Freescale MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC or FXLS8471Q triaxial accelerometer Required properties: @@ -9,6 +9,7 @@ Required properties: * "fsl,mma8453" * "fsl,mma8652" * "fsl,mma8653" + * "fsl,fxls8471" - reg: the I2C address of the chip diff --git a/Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt b/Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt new file mode 100644 index 000000000000..0bcae5140bc5 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt @@ -0,0 +1,21 @@ +NXP LPC1850 ADC bindings + +Required properties: +- compatible: Should be "nxp,lpc1850-adc" +- reg: Offset and length of the register set for the ADC device +- interrupts: The interrupt number for the ADC device +- clocks: The root clock of the ADC controller +- vref-supply: The regulator supply ADC reference voltage +- resets: phandle to reset controller and line specifier + +Example: + +adc0: adc@400e3000 { + compatible = "nxp,lpc1850-adc"; + reg = <0x400e3000 0x1000>; + interrupts = <17>; + clocks = <&ccu1 CLK_APB3_ADC0>; + vref-supply = <®_vdda>; + resets = <&rgu 40>; + status = "disabled"; +}; diff --git a/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt b/Documentation/devicetree/bindings/iio/adc/mxs-lradc.txt index 555fb117d4fa..555fb117d4fa 100644 --- a/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt +++ b/Documentation/devicetree/bindings/iio/adc/mxs-lradc.txt diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt index a9a5fe19ff2a..bf99e2f24788 100644 --- a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt +++ b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt @@ -1,7 +1,11 @@ Rockchip Successive Approximation Register (SAR) A/D Converter bindings Required properties: -- compatible: Should be "rockchip,saradc" or "rockchip,rk3066-tsadc" +- compatible: should be "rockchip,<name>-saradc" or "rockchip,rk3066-tsadc" + - "rockchip,saradc": for rk3188, rk3288 + - "rockchip,rk3066-tsadc": for rk3036 + - "rockchip,rk3399-saradc": for rk3399 + - reg: physical base address of the controller and length of memory mapped region. - interrupts: The interrupt number to the cpu. The interrupt specifier format diff --git a/Documentation/devicetree/bindings/iio/dac/ad5592r.txt b/Documentation/devicetree/bindings/iio/dac/ad5592r.txt new file mode 100644 index 000000000000..989f96f31c66 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/ad5592r.txt @@ -0,0 +1,155 @@ +Analog Devices AD5592R/AD5593R DAC/ADC device driver + +Required properties for the AD5592R: + - compatible: Must be "adi,ad5592r" + - reg: SPI chip select number for the device + - spi-max-frequency: Max SPI frequency to use (< 30000000) + - spi-cpol: The AD5592R requires inverse clock polarity (CPOL) mode + +Required properties for the AD5593R: + - compatible: Must be "adi,ad5593r" + - reg: I2C address of the device + +Required properties for all supported chips: + - #address-cells: Should be 1. + - #size-cells: Should be 0. + - channel nodes: + Each child node represents one channel and has the following + Required properties: + * reg: Pin on which this channel is connected to. + * adi,mode: Mode or function of this channel. + Macros specifying the valid values + can be found in <dt-bindings/iio/adi,ad5592r.h>. + + The following values are currently supported: + * CH_MODE_UNUSED (the pin is unused) + * CH_MODE_ADC (the pin is ADC input) + * CH_MODE_DAC (the pin is DAC output) + * CH_MODE_DAC_AND_ADC (the pin is DAC output + but can be monitored by an ADC, since + there is no disadvantage this + this should be considered as the + preferred DAC mode) + * CH_MODE_GPIO (the pin is registered + with GPIOLIB) + Optional properties: + * adi,off-state: State of this channel when unused or the + device gets removed. Macros specifying the + valid values can be found in + <dt-bindings/iio/adi,ad5592r.h>. + + * CH_OFFSTATE_PULLDOWN (the pin is pulled down) + * CH_OFFSTATE_OUT_LOW (the pin is output low) + * CH_OFFSTATE_OUT_HIGH (the pin is output high) + * CH_OFFSTATE_OUT_TRISTATE (the pin is + tristated output) + + +Optional properties: + - vref-supply: Phandle to the external reference voltage supply. This should + only be set if there is an external reference voltage connected to the VREF + pin. If the property is not set the internal 2.5V reference is used. + - reset-gpios : GPIO spec for the RESET pin. If specified, it will be + asserted during driver probe. + - gpio-controller: Marks the device node as a GPIO controller. + - #gpio-cells: Should be 2. The first cell is the GPIO number and the second + cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. + +AD5592R Example: + + #include <dt-bindings/iio/adi,ad5592r.h> + + vref: regulator-vref { + compatible = "regulator-fixed"; + regulator-name = "vref-ad559x"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ad5592r@0 { + #size-cells = <0>; + #address-cells = <1>; + #gpio-cells = <2>; + compatible = "adi,ad5592r"; + reg = <0>; + + spi-max-frequency = <1000000>; + spi-cpol; + + vref-supply = <&vref>; /* optional */ + reset-gpios = <&gpio0 86 0>; /* optional */ + gpio-controller; + + channel@0 { + reg = <0>; + adi,mode = <CH_MODE_DAC>; + }; + channel@1 { + reg = <1>; + adi,mode = <CH_MODE_ADC>; + }; + channel@2 { + reg = <2>; + adi,mode = <CH_MODE_DAC_AND_ADC>; + }; + channel@3 { + reg = <3>; + adi,mode = <CH_MODE_DAC_AND_ADC>; + adi,off-state = <CH_OFFSTATE_PULLDOWN>; + }; + channel@4 { + reg = <4>; + adi,mode = <CH_MODE_UNUSED>; + adi,off-state = <CH_OFFSTATE_PULLDOWN>; + }; + channel@5 { + reg = <5>; + adi,mode = <CH_MODE_GPIO>; + adi,off-state = <CH_OFFSTATE_PULLDOWN>; + }; + channel@6 { + reg = <6>; + adi,mode = <CH_MODE_GPIO>; + adi,off-state = <CH_OFFSTATE_PULLDOWN>; + }; + channel@7 { + reg = <7>; + adi,mode = <CH_MODE_GPIO>; + adi,off-state = <CH_OFFSTATE_PULLDOWN>; + }; + }; + +AD5593R Example: + + #include <dt-bindings/iio/adi,ad5592r.h> + + ad5593r@10 { + #size-cells = <0>; + #address-cells = <1>; + #gpio-cells = <2>; + compatible = "adi,ad5593r"; + reg = <0x10>; + gpio-controller; + + channel@0 { + reg = <0>; + adi,mode = <CH_MODE_DAC>; + adi,off-state = <CH_OFFSTATE_PULLDOWN>; + }; + channel@1 { + reg = <1>; + adi,mode = <CH_MODE_ADC>; + adi,off-state = <CH_OFFSTATE_PULLDOWN>; + }; + channel@2 { + reg = <2>; + adi,mode = <CH_MODE_DAC_AND_ADC>; + adi,off-state = <CH_OFFSTATE_PULLDOWN>; + }; + channel@6 { + reg = <6>; + adi,mode = <CH_MODE_GPIO>; + adi,off-state = <CH_OFFSTATE_PULLDOWN>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/dac/lpc1850-dac.txt b/Documentation/devicetree/bindings/iio/dac/lpc1850-dac.txt new file mode 100644 index 000000000000..7d6647d4af5e --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/lpc1850-dac.txt @@ -0,0 +1,20 @@ +NXP LPC1850 DAC bindings + +Required properties: +- compatible: Should be "nxp,lpc1850-dac" +- reg: Offset and length of the register set for the ADC device +- interrupts: The interrupt number for the ADC device +- clocks: The root clock of the ADC controller +- vref-supply: The regulator supply ADC reference voltage +- resets: phandle to reset controller and line specifier + +Example: +dac: dac@400e1000 { + compatible = "nxp,lpc1850-dac"; + reg = <0x400e1000 0x1000>; + interrupts = <0>; + clocks = <&ccu1 CLK_APB3_DAC>; + vref-supply = <®_vdda>; + resets = <&rgu 42>; + status = "disabled"; +}; diff --git a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt index e4d8f1c52f4a..a9fc11e43b45 100644 --- a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt +++ b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt @@ -8,10 +8,23 @@ Required properties: - interrupt-parent : should be the phandle for the interrupt controller - interrupts : interrupt mapping for GPIO IRQ +Optional properties: + - mount-matrix: an optional 3x3 mounting rotation matrix + + Example: mpu6050@68 { compatible = "invensense,mpu6050"; reg = <0x68>; interrupt-parent = <&gpio1>; interrupts = <18 1>; + mount-matrix = "-0.984807753012208", /* x0 */ + "0", /* y0 */ + "-0.173648177666930", /* z0 */ + "0", /* x1 */ + "-1", /* y1 */ + "0", /* z1 */ + "-0.173648177666930", /* x2 */ + "0", /* y2 */ + "0.984807753012208"; /* z2 */ }; diff --git a/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt b/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt index 011679f1a425..e1e7dd3259f6 100644 --- a/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt +++ b/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt @@ -8,6 +8,8 @@ Required properties: Optional properties: - gpios : should be device tree identifier of the magnetometer DRDY pin + - vdd-supply: an optional regulator that needs to be on to provide VDD + - mount-matrix: an optional 3x3 mounting rotation matrix Example: @@ -15,4 +17,14 @@ ak8975@0c { compatible = "asahi-kasei,ak8975"; reg = <0x0c>; gpios = <&gpj0 7 0>; + vdd-supply = <&ldo_3v3_gnss>; + mount-matrix = "-0.984807753012208", /* x0 */ + "0", /* y0 */ + "-0.173648177666930", /* z0 */ + "0", /* x1 */ + "-1", /* y1 */ + "0", /* z1 */ + "-0.173648177666930", /* x2 */ + "0", /* y2 */ + "0.984807753012208"; /* z2 */ }; diff --git a/Documentation/devicetree/bindings/iio/potentiometer/ds1803.txt b/Documentation/devicetree/bindings/iio/potentiometer/ds1803.txt new file mode 100644 index 000000000000..df77bf552656 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/potentiometer/ds1803.txt @@ -0,0 +1,21 @@ +* Maxim Integrated DS1803 digital potentiometer driver + +The node for this driver must be a child node of a I2C controller, hence +all mandatory properties for your controller must be specified. See directory: + + Documentation/devicetree/bindings/i2c + +for more details. + +Required properties: + - compatible: Must be one of the following, depending on the + model: + "maxim,ds1803-010", + "maxim,ds1803-050", + "maxim,ds1803-100" + +Example: +ds1803: ds1803@1 { + reg = <0x28>; + compatible = "maxim,ds1803-010"; +}; diff --git a/Documentation/devicetree/bindings/iio/potentiometer/mcp4131.txt b/Documentation/devicetree/bindings/iio/potentiometer/mcp4131.txt new file mode 100644 index 000000000000..3ccba16f7035 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/potentiometer/mcp4131.txt @@ -0,0 +1,84 @@ +* Microchip MCP413X/414X/415X/416X/423X/424X/425X/426X Digital Potentiometer + driver + +The node for this driver must be a child node of a SPI controller, hence +all mandatory properties described in + + Documentation/devicetree/bindings/spi/spi-bus.txt + +must be specified. + +Required properties: + - compatible: Must be one of the following, depending on the + model: + "microchip,mcp4131-502" + "microchip,mcp4131-103" + "microchip,mcp4131-503" + "microchip,mcp4131-104" + "microchip,mcp4132-502" + "microchip,mcp4132-103" + "microchip,mcp4132-503" + "microchip,mcp4132-104" + "microchip,mcp4141-502" + "microchip,mcp4141-103" + "microchip,mcp4141-503" + "microchip,mcp4141-104" + "microchip,mcp4142-502" + "microchip,mcp4142-103" + "microchip,mcp4142-503" + "microchip,mcp4142-104" + "microchip,mcp4151-502" + "microchip,mcp4151-103" + "microchip,mcp4151-503" + "microchip,mcp4151-104" + "microchip,mcp4152-502" + "microchip,mcp4152-103" + "microchip,mcp4152-503" + "microchip,mcp4152-104" + "microchip,mcp4161-502" + "microchip,mcp4161-103" + "microchip,mcp4161-503" + "microchip,mcp4161-104" + "microchip,mcp4162-502" + "microchip,mcp4162-103" + "microchip,mcp4162-503" + "microchip,mcp4162-104" + "microchip,mcp4231-502" + "microchip,mcp4231-103" + "microchip,mcp4231-503" + "microchip,mcp4231-104" + "microchip,mcp4232-502" + "microchip,mcp4232-103" + "microchip,mcp4232-503" + "microchip,mcp4232-104" + "microchip,mcp4241-502" + "microchip,mcp4241-103" + "microchip,mcp4241-503" + "microchip,mcp4241-104" + "microchip,mcp4242-502" + "microchip,mcp4242-103" + "microchip,mcp4242-503" + "microchip,mcp4242-104" + "microchip,mcp4251-502" + "microchip,mcp4251-103" + "microchip,mcp4251-503" + "microchip,mcp4251-104" + "microchip,mcp4252-502" + "microchip,mcp4252-103" + "microchip,mcp4252-503" + "microchip,mcp4252-104" + "microchip,mcp4261-502" + "microchip,mcp4261-103" + "microchip,mcp4261-503" + "microchip,mcp4261-104" + "microchip,mcp4262-502" + "microchip,mcp4262-103" + "microchip,mcp4262-503" + "microchip,mcp4262-104" + +Example: +mcp4131: mcp4131@0 { + compatible = "mcp4131-502"; + reg = <0>; + spi-max-frequency = <500000>; +}; diff --git a/Documentation/devicetree/bindings/iio/pressure/hp03.txt b/Documentation/devicetree/bindings/iio/pressure/hp03.txt new file mode 100644 index 000000000000..54e7e70bcea5 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/pressure/hp03.txt @@ -0,0 +1,17 @@ +HopeRF HP03 digital pressure/temperature sensors + +Required properties: +- compatible: must be "hoperf,hp03" +- xclr-gpio: must be device tree identifier of the XCLR pin. + The XCLR pin is a reset of the ADC in the chip, + it must be pulled HI before the conversion and + readout of the value from the ADC registers and + pulled LO afterward. + +Example: + +hp03@0x77 { + compatible = "hoperf,hp03"; + reg = <0x77>; + xclr-gpio = <&portc 0 0x0>; +}; diff --git a/Documentation/devicetree/bindings/iio/pressure/ms5611.txt b/Documentation/devicetree/bindings/iio/pressure/ms5611.txt new file mode 100644 index 000000000000..17bca866c084 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/pressure/ms5611.txt @@ -0,0 +1,19 @@ +MEAS ms5611 family pressure sensors + +Pressure sensors from MEAS Switzerland with SPI and I2C bus interfaces. + +Required properties: +- compatible: "meas,ms5611" or "meas,ms5607" +- reg: the I2C address or SPI chip select the device will respond to + +Optional properties: +- vdd-supply: an optional regulator that needs to be on to provide VDD + power to the sensor. + +Example: + +ms5607@77 { + compatible = "meas,ms5607"; + reg = <0x77>; + vdd-supply = <&ldo_3v3_gnss>; +}; diff --git a/Documentation/devicetree/bindings/iio/st-sensors.txt b/Documentation/devicetree/bindings/iio/st-sensors.txt index d4b87cc1e446..5844cf72862d 100644 --- a/Documentation/devicetree/bindings/iio/st-sensors.txt +++ b/Documentation/devicetree/bindings/iio/st-sensors.txt @@ -16,6 +16,10 @@ Optional properties: - st,drdy-int-pin: the pin on the package that will be used to signal "data ready" (valid values: 1 or 2). This property is not configurable on all sensors. +- drive-open-drain: the interrupt/data ready line will be configured + as open drain, which is useful if several sensors share the same + interrupt line. (This binding is taken from pinctrl/pinctrl-bindings.txt) + This is a boolean property. Sensors may also have applicable pin control settings, those use the standard bindings from pinctrl/pinctrl-bindings.txt. @@ -37,6 +41,7 @@ Accelerometers: - st,lsm330-accel - st,lsm303agr-accel - st,lis2dh12-accel +- st,h3lis331dl-accel Gyroscopes: - st,l3g4200d-gyro @@ -46,6 +51,7 @@ Gyroscopes: - st,l3gd20-gyro - st,l3g4is-gyro - st,lsm330-gyro +- st,lsm9ds0-gyro Magnetometers: - st,lsm303agr-magn diff --git a/Documentation/devicetree/bindings/input/ads7846.txt b/Documentation/devicetree/bindings/input/ads7846.txt index c6cfe2e3ed41..9fc47b006fd1 100644 --- a/Documentation/devicetree/bindings/input/ads7846.txt +++ b/Documentation/devicetree/bindings/input/ads7846.txt @@ -29,7 +29,7 @@ Optional properties: ti,vref-delay-usecs vref supply delay in usecs, 0 for external vref (u16). ti,vref-mv The VREF voltage, in millivolts (u16). - Set to 0 to use internal refernce + Set to 0 to use internal references (ADS7846). ti,keep-vref-on set to keep vref on for differential measurements as well diff --git a/Documentation/devicetree/bindings/input/gpio-keys.txt b/Documentation/devicetree/bindings/input/gpio-keys.txt index 21641236c095..a94940481e55 100644 --- a/Documentation/devicetree/bindings/input/gpio-keys.txt +++ b/Documentation/devicetree/bindings/input/gpio-keys.txt @@ -32,17 +32,17 @@ Optional subnode-properties: Example nodes: - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; - button@21 { + + up { label = "GPIO Key UP"; linux,code = <103>; gpios = <&gpio1 0 1>; }; - button@22 { + + down { label = "GPIO Key DOWN"; linux,code = <108>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; diff --git a/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt b/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt index 34e3382a0659..ac5dff412e25 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt @@ -2,11 +2,17 @@ Required properties: - compatible: must be "brcm,iproc-touchscreen" -- reg: physical base address of the controller and length of memory mapped - region. +- ts_syscon: handler of syscon node defining physical base + address of the controller and length of memory mapped region. + If this property is selected please make sure MFD_SYSCON config + is enabled in the defconfig file. - clocks: The clock provided by the SOC to driver the tsc -- clock-name: name for the clock +- clock-names: name for the clock - interrupts: The touchscreen controller's interrupt +- address-cells: Specify the number of u32 entries needed in child nodes. + Should set to 1. +- size-cells: Specify number of u32 entries needed to specify child nodes size + in reg property. Should set to 1. Optional properties: - scanning_period: Time between scans. Each step is 1024 us. Valid 1-256. @@ -53,13 +59,18 @@ Optional properties: - touchscreen-inverted-x: X axis is inverted (boolean) - touchscreen-inverted-y: Y axis is inverted (boolean) -Example: +Example: An example of touchscreen node - touchscreen: tsc@0x180A6000 { + ts_adc_syscon: ts_adc_syscon@180a6000 { + compatible = "brcm,iproc-ts-adc-syscon","syscon"; + reg = <0x180a6000 0xc30>; + }; + + touchscreen: touchscreen@180A6000 { compatible = "brcm,iproc-touchscreen"; #address-cells = <1>; #size-cells = <1>; - reg = <0x180A6000 0x40>; + ts_syscon = <&ts_adc_syscon>; clocks = <&adc_clk>; clock-names = "tsc_clk"; interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt b/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt index cdf05f9b2329..abfcab3edc66 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt @@ -15,7 +15,7 @@ Optional properties: - fsl,pen-debounce-ns: Pen debounce time in nanoseconds. - fsl,pen-threshold: Pen-down threshold for the touchscreen. This is a value between 1 and 4096. It is the ratio between the internal reference voltage - and the measured voltage after the plate was precharged. Resistence between + and the measured voltage after the plate was precharged. Resistance between plates and therefore the voltage decreases with pressure so that a smaller value is equivalent to a higher pressure. - fsl,settling-time-ns: Settling time in nanoseconds. The settling time is before diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt index 007a5b46256a..4c29cdab0ea5 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt @@ -11,6 +11,8 @@ Main node required properties: - interrupt-controller : Identifies the node as an interrupt controller - #interrupt-cells : Specifies the number of cells needed to encode an interrupt source. Must be a single cell with a value of at least 3. + If the system requires describing PPI affinity, then the value must + be at least 4. The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI interrupts. Other values are reserved for future use. @@ -24,7 +26,14 @@ Main node required properties: 1 = edge triggered 4 = level triggered - Cells 4 and beyond are reserved for future use and must have a value + The 4th cell is a phandle to a node describing a set of CPUs this + interrupt is affine to. The interrupt must be a PPI, and the node + pointed must be a subnode of the "ppi-partitions" subnode. For + interrupt types other than PPI or PPIs that are not partitionned, + this cell must be zero. See the "ppi-partitions" node description + below. + + Cells 5 and beyond are reserved for future use and must have a value of 0 if present. - reg : Specifies base physical address(s) and size of the GIC @@ -50,6 +59,11 @@ Optional Sub-nodes: +PPI affinity can be expressed as a single "ppi-partitions" node, +containing a set of sub-nodes, each with the following property: +- affinity: Should be a list of phandles to CPU nodes (as described in +Documentation/devicetree/bindings/arm/cpus.txt). + GICv3 has one or more Interrupt Translation Services (ITS) that are used to route Message Signalled Interrupts (MSI) to the CPUs. @@ -91,7 +105,7 @@ Examples: gic: interrupt-controller@2c010000 { compatible = "arm,gic-v3"; - #interrupt-cells = <3>; + #interrupt-cells = <4>; #address-cells = <2>; #size-cells = <2>; ranges; @@ -119,4 +133,20 @@ Examples: #msi-cells = <1>; reg = <0x0 0x2c400000 0 0x200000>; }; + + ppi-partitions { + part0: interrupt-partition-0 { + affinity = <&cpu0 &cpu2>; + }; + + part1: interrupt-partition-1 { + affinity = <&cpu1 &cpu3>; + }; + }; + }; + + + device@0 { + reg = <0 0 0 4>; + interrupts = <1 1 4 &part0>; }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt index c9cf605bb995..2a1d16bdf834 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt @@ -6,7 +6,7 @@ controllers are OR:ed together and fed to the CPU tile's IRQ input. Each instance can handle up to 32 interrupts. Required properties: -- compatible: "arm,versatile-fpga-irq" +- compatible: "arm,versatile-fpga-irq" or "oxsemi,ox810se-rps-irq" - interrupt-controller: Identifies the node as an interrupt controller - #interrupt-cells: The number of cells to define the interrupts. Must be 1 as the FPGA IRQ controller has no configuration options for interrupt diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt index 2d6c8bb4d827..6428a6ba9f4a 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt @@ -71,8 +71,8 @@ Bank 1: 24: DMA8 25: DMA9 26: DMA10 -27: DMA11 -28: DMA12 +27: DMA11-14 - shared interrupt for DMA 11 to 14 +28: DMAALL - triggers on all dma interrupts (including chanel 15) 29: AUX 30: ARM 31: VPUDMA diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-l1-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-l1-intc.txt new file mode 100644 index 000000000000..4040905388d9 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-l1-intc.txt @@ -0,0 +1,57 @@ +Broadcom BCM6345-style Level 1 interrupt controller + +This block is a first level interrupt controller that is typically connected +directly to one of the HW INT lines on each CPU. + +Key elements of the hardware design include: + +- 32, 64 or 128 incoming level IRQ lines + +- Most onchip peripherals are wired directly to an L1 input + +- A separate instance of the register set for each CPU, allowing individual + peripheral IRQs to be routed to any CPU + +- Contains one or more enable/status word pairs per CPU + +- No atomic set/clear operations + +- No polarity/level/edge settings + +- No FIFO or priority encoder logic; software is expected to read all + 2-4 status words to determine which IRQs are pending + +Required properties: + +- compatible: should be "brcm,bcm<soc>-l1-intc", "brcm,bcm6345-l1-intc" +- reg: specifies the base physical address and size of the registers; + the number of supported IRQs is inferred from the size argument +- interrupt-controller: identifies the node as an interrupt controller +- #interrupt-cells: specifies the number of cells needed to encode an interrupt + source, should be 1. +- interrupt-parent: specifies the phandle to the parent interrupt controller(s) + this one is cascaded from +- interrupts: specifies the interrupt line(s) in the interrupt-parent controller + node; valid values depend on the type of parent interrupt controller + +If multiple reg ranges and interrupt-parent entries are present on an SMP +system, the driver will allow IRQ SMP affinity to be set up through the +/proc/irq/ interface. In the simplest possible configuration, only one +reg range and one interrupt-parent is needed. + +The driver operates in native CPU endian by default, there is no support for +specifying an alternative endianness. + +Example: + +periph_intc: interrupt-controller@10000000 { + compatible = "brcm,bcm63168-l1-intc", "brcm,bcm6345-l1-intc"; + reg = <0x10000020 0x20>, + <0x10000040 0x20>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpu_intc>; + interrupts = <2>, <3>; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.txt new file mode 100644 index 000000000000..888b2b9f7064 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.txt @@ -0,0 +1,17 @@ +EZchip NPS Interrupt Controller + +Required properties: + +- compatible : should be "ezchip,nps400-ic" +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The value shall be 1. + + +Example: + +intc: interrupt-controller { + compatible = "ezchip,nps400-ic"; + interrupt-controller; + #interrupt-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt new file mode 100644 index 000000000000..9e389493203f --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt @@ -0,0 +1,30 @@ +* Freescale Layerscape SCFG PCIe MSI controller + +Required properties: + +- compatible: should be "fsl,<soc-name>-msi" to identify + Layerscape PCIe MSI controller block such as: + "fsl,1s1021a-msi" + "fsl,1s1043a-msi" +- msi-controller: indicates that this is a PCIe MSI controller node +- reg: physical base address of the controller and length of memory mapped. +- interrupts: an interrupt to the parent interrupt controller. + +Optional properties: +- interrupt-parent: the phandle to the parent interrupt controller. + +This interrupt controller hardware is a second level interrupt controller that +is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based +platforms. If interrupt-parent is not provided, the default parent interrupt +controller will be used. +Each PCIe node needs to have property msi-parent that points to +MSI controller node + +Examples: + + msi1: msi-controller@1571000 { + compatible = "fsl,1s1043a-msi"; + reg = <0x0 0x1571000 0x0 0x8>, + msi-controller; + interrupts = <0 116 0x4>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt index b8e1674c7837..8cf564d083d2 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt @@ -16,8 +16,7 @@ Required properties: "mediatek,mt6577-sysirq" "mediatek,mt2701-sysirq" - interrupt-controller : Identifies the node as an interrupt controller -- #interrupt-cells : Use the same format as specified by GIC in - Documentation/devicetree/bindings/arm/gic.txt +- #interrupt-cells : Use the same format as specified by GIC in arm,gic.txt. - interrupt-parent: phandle of irq parent for sysirq. The parent must use the same interrupt-cells format as GIC. - reg: Physical base address of the intpol registers and length of memory diff --git a/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra-ictlr.txt b/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt index 1099fe0788fa..1099fe0788fa 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra-ictlr.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt diff --git a/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.txt b/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.txt index 539adca19e8f..38211f344dc8 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.txt @@ -1,38 +1,60 @@ -* NXP LPC32xx Main Interrupt Controller - (MIC, including SIC1 and SIC2 secondary controllers) +* NXP LPC32xx MIC, SIC1 and SIC2 Interrupt Controllers Required properties: -- compatible: Should be "nxp,lpc3220-mic" -- interrupt-controller: Identifies the node as an interrupt controller. -- interrupt-parent: Empty for the interrupt controller itself -- #interrupt-cells: The number of cells to define the interrupts. Should be 2. - The first cell is the IRQ number - The second cell is used to specify mode: - 1 = low-to-high edge triggered - 2 = high-to-low edge triggered - 4 = active high level-sensitive - 8 = active low level-sensitive - Default for internal sources should be set to 4 (active high). -- reg: Should contain MIC registers location and length +- compatible: "nxp,lpc3220-mic" or "nxp,lpc3220-sic". +- reg: should contain IC registers location and length. +- interrupt-controller: identifies the node as an interrupt controller. +- #interrupt-cells: the number of cells to define an interrupt, should be 2. + The first cell is the IRQ number, the second cell is used to specify + one of the supported IRQ types: + IRQ_TYPE_EDGE_RISING = low-to-high edge triggered, + IRQ_TYPE_EDGE_FALLING = high-to-low edge triggered, + IRQ_TYPE_LEVEL_HIGH = active high level-sensitive, + IRQ_TYPE_LEVEL_LOW = active low level-sensitive. + Reset value is IRQ_TYPE_LEVEL_LOW. + +Optional properties: +- interrupt-parent: empty for MIC interrupt controller, link to parent + MIC interrupt controller for SIC1 and SIC2 +- interrupts: empty for MIC interrupt controller, cascaded MIC + hardware interrupts for SIC1 and SIC2 Examples: - /* - * MIC - */ + + /* LPC32xx MIC, SIC1 and SIC2 interrupt controllers */ mic: interrupt-controller@40008000 { compatible = "nxp,lpc3220-mic"; + reg = <0x40008000 0x4000>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + sic1: interrupt-controller@4000c000 { + compatible = "nxp,lpc3220-sic"; + reg = <0x4000c000 0x4000>; interrupt-controller; - interrupt-parent; #interrupt-cells = <2>; - reg = <0x40008000 0xC000>; + + interrupt-parent = <&mic>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>, + <30 IRQ_TYPE_LEVEL_LOW>; }; - /* - * ADC - */ + sic2: interrupt-controller@40010000 { + compatible = "nxp,lpc3220-sic"; + reg = <0x40010000 0x4000>; + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&mic>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>, + <31 IRQ_TYPE_LEVEL_LOW>; + }; + + /* ADC */ adc@40048000 { compatible = "nxp,lpc3220-adc"; reg = <0x40048000 0x1000>; - interrupt-parent = <&mic>; - interrupts = <39 4>; + interrupt-parent = <&sic1>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu b/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu index 43effa0a4fe7..18d4f407bf0e 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu @@ -4,7 +4,7 @@ All TI OMAP4/5 (and their derivatives) an interrupt controller that routes interrupts to the GIC, and also serves as a wakeup source. It is also referred to as "WUGEN-MPU", hence the name of the binding. -Reguired properties: +Required properties: - compatible : should contain at least "ti,omap4-wugen-mpu" or "ti,omap5-wugen-mpu" @@ -20,7 +20,7 @@ Notes: - Because this HW ultimately routes interrupts to the GIC, the interrupt specifier must be that of the GIC. - Only SPIs can use the WUGEN as an interrupt parent. SGIs and PPIs - are explicitly forbiden. + are explicitly forbidden. Example: diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.txt b/Documentation/devicetree/bindings/iommu/arm,smmu.txt index 718074501fcb..19fe6f2c83f6 100644 --- a/Documentation/devicetree/bindings/iommu/arm,smmu.txt +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.txt @@ -16,6 +16,7 @@ conditions. "arm,mmu-400" "arm,mmu-401" "arm,mmu-500" + "cavium,smmu-v2" depending on the particular implementation and/or the version of the architecture implemented. diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt index 68419843e32f..af10678ea2f6 100644 --- a/Documentation/devicetree/bindings/leds/common.txt +++ b/Documentation/devicetree/bindings/leds/common.txt @@ -37,6 +37,9 @@ Optional properties for child nodes: property is mandatory for the LEDs in the non-flash modes (e.g. torch or indicator). +- panic-indicator : This property specifies that the LED should be used, + if at all possible, as a panic indicator. + Required properties for flash LED child nodes: - flash-max-microamp : Maximum flash LED supply current in microamperes. - flash-max-timeout-us : Maximum timeout in microseconds after which the flash diff --git a/Documentation/devicetree/bindings/leds/leds-gpio.txt b/Documentation/devicetree/bindings/leds/leds-gpio.txt index fea1ebfe24a9..cbbeb1850910 100644 --- a/Documentation/devicetree/bindings/leds/leds-gpio.txt +++ b/Documentation/devicetree/bindings/leds/leds-gpio.txt @@ -23,6 +23,8 @@ LED sub-node properties: property is not present. - retain-state-suspended: (optional) The suspend state can be retained.Such as charge-led gpio. +- panic-indicator : (optional) + see Documentation/devicetree/bindings/leds/common.txt Examples: diff --git a/Documentation/devicetree/bindings/media/i2c/adv7180.txt b/Documentation/devicetree/bindings/media/i2c/adv7180.txt new file mode 100644 index 000000000000..0d501154dfb2 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/adv7180.txt @@ -0,0 +1,29 @@ +* Analog Devices ADV7180 analog video decoder family + +The adv7180 family devices are used to capture analog video to different +digital interfaces like MIPI CSI-2 or parallel video. + +Required Properties : +- compatible : value must be one of + "adi,adv7180" + "adi,adv7182" + "adi,adv7280" + "adi,adv7280-m" + "adi,adv7281" + "adi,adv7281-m" + "adi,adv7281-ma" + "adi,adv7282" + "adi,adv7282-m" + +Example: + + i2c0@1c22000 { + ... + ... + adv7180@21 { + compatible = "adi,adv7180"; + reg = <0x21>; + }; + ... + }; + diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/rcar_vin.txt index 619193ccf7ff..6a4e61cbe011 100644 --- a/Documentation/devicetree/bindings/media/rcar_vin.txt +++ b/Documentation/devicetree/bindings/media/rcar_vin.txt @@ -5,14 +5,22 @@ The rcar_vin device provides video input capabilities for the Renesas R-Car family of devices. The current blocks are always slaves and suppot one input channel which can be either RGB, YUYV or BT656. - - compatible: Must be one of the following + - compatible: Must be one or more of the following - "renesas,vin-r8a7795" for the R8A7795 device - "renesas,vin-r8a7794" for the R8A7794 device - "renesas,vin-r8a7793" for the R8A7793 device + - "renesas,vin-r8a7792" for the R8A7792 device - "renesas,vin-r8a7791" for the R8A7791 device - "renesas,vin-r8a7790" for the R8A7790 device - "renesas,vin-r8a7779" for the R8A7779 device - "renesas,vin-r8a7778" for the R8A7778 device + - "renesas,rcar-gen2-vin" for a generic R-Car Gen2 compatible device. + - "renesas,rcar-gen3-vin" for a generic R-Car Gen3 compatible device. + + When compatible with the generic version nodes must list the + SoC-specific version corresponding to the platform first + followed by the generic version. + - reg: the register base and size for the device registers - interrupts: the interrupt for the device - clocks: Reference to the parent clock @@ -37,7 +45,7 @@ Device node example }; vin0: vin@0xe6ef0000 { - compatible = "renesas,vin-r8a7790"; + compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin"; clocks = <&mstp8_clks R8A7790_CLK_VIN0>; reg = <0 0xe6ef0000 0 0x1000>; interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/media/xilinx/video.txt b/Documentation/devicetree/bindings/media/xilinx/video.txt index cbd46fa0988f..68ac210e688e 100644 --- a/Documentation/devicetree/bindings/media/xilinx/video.txt +++ b/Documentation/devicetree/bindings/media/xilinx/video.txt @@ -20,7 +20,7 @@ The following properties are common to all Xilinx video IP cores. - xlnx,video-format: This property represents a video format transmitted on an AXI bus between video IP cores, using its VF code as defined in "AXI4-Stream Video IP and System Design Guide" [UG934]. How the format relates to the IP - core is decribed in the IP core bindings documentation. + core is described in the IP core bindings documentation. - xlnx,video-width: This property qualifies the video format with the sample width expressed as a number of bits per pixel component. All components must diff --git a/Documentation/devicetree/bindings/memory-controllers/exynos-srom.txt b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.txt new file mode 100644 index 000000000000..f633b5d0f8ca --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.txt @@ -0,0 +1,79 @@ +SAMSUNG Exynos SoCs SROM Controller driver. + +Required properties: +- compatible : Should contain "samsung,exynos4210-srom". + +- reg: offset and length of the register set + +Optional properties: +The SROM controller can be used to attach external peripherals. In this case +extra properties, describing the bus behind it, should be specified as below: + +- #address-cells: Must be set to 2 to allow device address translation. + Address is specified as (bank#, offset). + +- #size-cells: Must be set to 1 to allow device size passing + +- ranges: Must be set up to reflect the memory layout with four integer values + per bank: + <bank-number> 0 <parent address of bank> <size> + +Sub-nodes: +The actual device nodes should be added as subnodes to the SROMc node. These +subnodes, in addition to regular device specification, should contain the following +properties, describing configuration of the relevant SROM bank: + +Required properties: +- reg: bank number, base address (relative to start of the bank) and size of + the memory mapped for the device. Note that base address will be + typically 0 as this is the start of the bank. + +- samsung,srom-timing : array of 6 integers, specifying bank timings in the + following order: Tacp, Tcah, Tcoh, Tacc, Tcos, Tacs. + Each value is specified in cycles and has the following + meaning and valid range: + Tacp : Page mode access cycle at Page mode (0 - 15) + Tcah : Address holding time after CSn (0 - 15) + Tcoh : Chip selection hold on OEn (0 - 15) + Tacc : Access cycle (0 - 31, the actual time is N + 1) + Tcos : Chip selection set-up before OEn (0 - 15) + Tacs : Address set-up before CSn (0 - 15) + +Optional properties: +- reg-io-width : data width in bytes (1 or 2). If omitted, default of 1 is used. + +- samsung,srom-page-mode : if page mode is set, 4 data page mode will be configured, + else normal (1 data) page mode will be set. + +Example: basic definition, no banks are configured + memory-controller@12570000 { + compatible = "samsung,exynos4210-srom"; + reg = <0x12570000 0x14>; + }; + +Example: SROMc with SMSC911x ethernet chip on bank 3 + memory-controller@12570000 { + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x04000000 0x20000 // Bank0 + 1 0 0x05000000 0x20000 // Bank1 + 2 0 0x06000000 0x20000 // Bank2 + 3 0 0x07000000 0x20000>; // Bank3 + + compatible = "samsung,exynos4210-srom"; + reg = <0x12570000 0x14>; + + ethernet@3,0 { + compatible = "smsc,lan9115"; + reg = <3 0 0x10000>; // Bank 3, offset = 0 + phy-mode = "mii"; + interrupt-parent = <&gpx0>; + interrupts = <5 8>; + reg-io-width = <2>; + smsc,irq-push-pull; + smsc,force-internal-phy; + + samsung,srom-page-mode; + samsung,srom-timing = <9 12 1 9 1 1>; + }; + }; diff --git a/Documentation/devicetree/bindings/memory-controllers/tegra-emc.txt b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.txt index b59c625d6336..ba0bc3f12419 100644 --- a/Documentation/devicetree/bindings/memory-controllers/tegra-emc.txt +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.txt @@ -190,7 +190,7 @@ be specified, according to the board documentation: Example SoC include file: / { - emc@0,7001b000 { + emc@7001b000 { compatible = "nvidia,tegra124-emc"; reg = <0x0 0x7001b000 0x0 0x1000>; @@ -201,7 +201,7 @@ Example SoC include file: Example board file: / { - emc@0,7001b000 { + emc@7001b000 { emc-timings-3 { nvidia,ram-code = <3>; diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra-mc.txt b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.txt index 3338a2834ad7..8dbe47013c2b 100644 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra-mc.txt +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.txt @@ -61,7 +61,7 @@ specified, according to the board documentation: Example SoC include file: / { - mc: memory-controller@0,70019000 { + mc: memory-controller@70019000 { compatible = "nvidia,tegra124-mc"; reg = <0x0 0x70019000 0x0 0x1000>; clocks = <&tegra_car TEGRA124_CLK_MC>; @@ -72,7 +72,7 @@ Example SoC include file: #iommu-cells = <1>; }; - sdhci@0,700b0000 { + sdhci@700b0000 { compatible = "nvidia,tegra124-sdhci"; ... iommus = <&mc TEGRA_SWGROUP_SDMMC1A>; @@ -82,7 +82,7 @@ Example SoC include file: Example board file: / { - memory-controller@0,70019000 { + memory-controller@70019000 { emc-timings-3 { nvidia,ram-code = <3>; diff --git a/Documentation/devicetree/bindings/bus/ti-gpmc.txt b/Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt index 01683707060b..21055e210234 100644 --- a/Documentation/devicetree/bindings/bus/ti-gpmc.txt +++ b/Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt @@ -32,6 +32,19 @@ Required properties: bootloader) are used for the physical address decoding. As this will change in the future, filling correct values here is a requirement. + - interrupt-controller: The GPMC driver implements and interrupt controller for + the NAND events "fifoevent" and "termcount" plus the + rising/falling edges on the GPMC_WAIT pins. + The interrupt number mapping is as follows + 0 - NAND_fifoevent + 1 - NAND_termcount + 2 - GPMC_WAIT0 pin edge + 3 - GPMC_WAIT1 pin edge, and so on. + - interrupt-cells: Must be set to 2 + - gpio-controller: The GPMC driver implements a GPIO controller for the + GPMC WAIT pins that can be used as general purpose inputs. + 0 maps to GPMC_WAIT0 pin. + - gpio-cells: Must be set to 2 Timing properties for child nodes. All are optional and default to 0. @@ -130,6 +143,10 @@ Example for an AM33xx board: #address-cells = <2>; #size-cells = <1>; ranges = <0 0 0x08000000 0x10000000>; /* CS0 @addr 0x8000000, size 0x10000000 */ + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; /* child nodes go here */ }; diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt index 9b30011ecabe..a6e2ea41160c 100644 --- a/Documentation/devicetree/bindings/mfd/arizona.txt +++ b/Documentation/devicetree/bindings/mfd/arizona.txt @@ -1,6 +1,6 @@ Cirrus Logic/Wolfson Microelectronics Arizona class audio SoCs -These devices are audio SoCs with extensive digital capabilites and a range +These devices are audio SoCs with extensive digital capabilities and a range of analogue I/O. Required properties: diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt index fd39fa54571b..d20b1034e967 100644 --- a/Documentation/devicetree/bindings/mfd/axp20x.txt +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt @@ -6,10 +6,11 @@ axp202 (X-Powers) axp209 (X-Powers) axp221 (X-Powers) axp223 (X-Powers) +axp809 (X-Powers) Required properties: - compatible: "x-powers,axp152", "x-powers,axp202", "x-powers,axp209", - "x-powers,axp221", "x-powers,axp223" + "x-powers,axp221", "x-powers,axp223", "x-powers,axp809" - reg: The I2C slave address or RSB hardware address for the AXP chip - interrupt-parent: The parent interrupt controller - interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin @@ -18,7 +19,9 @@ Required properties: Optional properties: - x-powers,dcdc-freq: defines the work frequency of DC-DC in KHz - (range: 750-1875). Default: 1.5MHz + AXP152/20X: range: 750-1875, Default: 1.5 MHz + AXP22X/80X: range: 1800-4050, Default: 3 MHz + - <input>-supply: a phandle to the regulator supply node. May be omitted if inputs are unregulated, such as using the IPSOUT output from the PMIC. @@ -77,6 +80,30 @@ LDO_IO0 : LDO : ips-supply : GPIO 0 LDO_IO1 : LDO : ips-supply : GPIO 1 RTC_LDO : LDO : ips-supply : always on +AXP809 regulators, type, and corresponding input supply names: + +Regulator Type Supply Name Notes +--------- ---- ----------- ----- +DCDC1 : DC-DC buck : vin1-supply +DCDC2 : DC-DC buck : vin2-supply +DCDC3 : DC-DC buck : vin3-supply +DCDC4 : DC-DC buck : vin4-supply +DCDC5 : DC-DC buck : vin5-supply +DC1SW : On/Off Switch : : DCDC1 secondary output +DC5LDO : LDO : : input from DCDC5 +ALDO1 : LDO : aldoin-supply : shared supply +ALDO2 : LDO : aldoin-supply : shared supply +ALDO3 : LDO : aldoin-supply : shared supply +DLDO1 : LDO : dldoin-supply : shared supply +DLDO2 : LDO : dldoin-supply : shared supply +ELDO1 : LDO : eldoin-supply : shared supply +ELDO2 : LDO : eldoin-supply : shared supply +ELDO3 : LDO : eldoin-supply : shared supply +LDO_IO0 : LDO : ips-supply : GPIO 0 +LDO_IO1 : LDO : ips-supply : GPIO 1 +RTC_LDO : LDO : ips-supply : always on +SW : On/Off Switch : swin-supply + Example: axp209: pmic@34 { diff --git a/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt b/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt new file mode 100644 index 000000000000..05485699d70e --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt @@ -0,0 +1,27 @@ +Hisilicon Hi655x Power Management Integrated Circuit (PMIC) + +The hardware layout for access PMIC Hi655x from AP SoC Hi6220. +Between PMIC Hi655x and Hi6220, the physical signal channel is SSI. +We can use memory-mapped I/O to communicate. + ++----------------+ +-------------+ +| | | | +| Hi6220 | SSI bus | Hi655x | +| |-------------| | +| |(REGMAP_MMIO)| | ++----------------+ +-------------+ + +Required properties: +- compatible: Should be "hisilicon,hi655x-pmic". +- reg: Base address of PMIC on Hi6220 SoC. +- interrupt-controller: Hi655x has internal IRQs (has own IRQ domain). +- pmic-gpios: The GPIO used by PMIC IRQ. + +Example: + pmic: pmic@f8000000 { + compatible = "hisilicon,hi655x-pmic"; + reg = <0x0 0xf8000000 0x0 0x1000>; + interrupt-controller; + #interrupt-cells = <2>; + pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + } diff --git a/Documentation/devicetree/bindings/mfd/max77620.txt b/Documentation/devicetree/bindings/mfd/max77620.txt new file mode 100644 index 000000000000..2ad44f7e4880 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/max77620.txt @@ -0,0 +1,143 @@ +MAX77620 Power management IC from Maxim Semiconductor. + +Required properties: +------------------- +- compatible: Must be one of + "maxim,max77620" + "maxim,max20024". +- reg: I2C device address. + +Optional properties: +------------------- +- interrupts: The interrupt on the parent the controller is + connected to. +- interrupt-controller: Marks the device node as an interrupt controller. +- #interrupt-cells: is <2> and their usage is compliant to the 2 cells + variant of <../interrupt-controller/interrupts.txt> + IRQ numbers for different interrupt source of MAX77620 + are defined at dt-bindings/mfd/max77620.h. + +Optional subnodes and their properties: +======================================= + +Flexible power sequence configurations: +-------------------------------------- +The Flexible Power Sequencer (FPS) allows each regulator to power up under +hardware or software control. Additionally, each regulator can power on +independently or among a group of other regulators with an adjustable power-up +and power-down delays (sequencing). GPIO1, GPIO2, and GPIO3 can be programmed +to be part of a sequence allowing external regulators to be sequenced along +with internal regulators. 32KHz clock can be programmed to be part of a +sequence. + +The flexible sequencing structure consists of two hardware enable inputs +(EN0, EN1), and 3 master sequencing timers called FPS0, FPS1 and FPS2. +Each master sequencing timer is programmable through its configuration +register to have a hardware enable source (EN1 or EN2) or a software enable +source (SW). When enabled/disabled, the master sequencing timer generates +eight sequencing events on different time periods called slots. The time +period between each event is programmable within the configuration register. +Each regulator, GPIO1, GPIO2, GPIO3, and 32KHz clock has a flexible power +sequence slave register which allows its enable source to be specified as +a flexible power sequencer timer or a software bit. When a FPS source of +regulators, GPIOs and clocks specifies the enable source to be a flexible +power sequencer, the power up and power down delays can be specified in +the regulators, GPIOs and clocks flexible power sequencer configuration +registers. + +When FPS event cleared (set to LOW), regulators, GPIOs and 32KHz +clock are set into following state at the sequencing event that +corresponds to its flexible sequencer configuration register. + Sleep state: In this state, regulators, GPIOs + and 32KHz clock get disabled at + the sequencing event. + Global Low Power Mode (GLPM): In this state, regulators are set in + low power mode at the sequencing event. + +The configuration parameters of FPS is provided through sub-node "fps" +and their child for FPS specific. The child node name for FPS are "fps0", +"fps1", and "fps2" for FPS0, FPS1 and FPS2 respectively. + +The FPS configurations like FPS source, power up and power down slots for +regulators, GPIOs and 32kHz clocks are provided in their respective +configuration nodes which is explained in respective sub-system DT +binding document. + +There is need for different FPS configuration parameters based on system +state like when system state changed from active to suspend or active to +power off (shutdown). + +Optional properties: +------------------- +-maxim,fps-event-source: u32, FPS event source like external + hardware input to PMIC i.e. EN0, EN1 or + software (SW). + The macros are defined on + dt-bindings/mfd/max77620.h + for different control source. + - MAX77620_FPS_EVENT_SRC_EN0 + for hardware input pin EN0. + - MAX77620_FPS_EVENT_SRC_EN1 + for hardware input pin EN1. + - MAX77620_FPS_EVENT_SRC_SW + for software control. + +-maxim,shutdown-fps-time-period-us: u32, FPS time period in microseconds + when system enters in to shutdown + state. + +-maxim,suspend-fps-time-period-us: u32, FPS time period in microseconds + when system enters in to suspend state. + +-maxim,device-state-on-disabled-event: u32, describe the PMIC state when FPS + event cleared (set to LOW) whether it + should go to sleep state or low-power + state. Following are valid values: + - MAX77620_FPS_INACTIVE_STATE_SLEEP + to set the PMIC state to sleep. + - MAX77620_FPS_INACTIVE_STATE_LOW_POWER + to set the PMIC state to low + power. + Absence of this property or other value + will not change device state when FPS + event get cleared. + +Here supported time periods by device in microseconds are as follows: +MAX77620 supports 40, 80, 160, 320, 640, 1280, 2560 and 5120 microseconds. +MAX20024 supports 20, 40, 80, 160, 320, 640, 1280 and 2540 microseconds. + +For DT binding details of different sub modules like GPIO, pincontrol, +regulator, power, please refer respective device-tree binding document +under their respective sub-system directories. + +Example: +-------- +#include <dt-bindings/mfd/max77620.h> + +max77620@3c { + compatible = "maxim,max77620"; + reg = <0x3c>; + + interrupt-parent = <&intc>; + interrupts = <0 86 IRQ_TYPE_NONE>; + + interrupt-controller; + #interrupt-cells = <2>; + + fps { + fps0 { + maxim,shutdown-fps-time-period-us = <1280>; + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>; + }; + + fps1 { + maxim,shutdown-fps-time-period-us = <1280>; + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; + }; + + fps2 { + maxim,shutdown-fps-time-period-us = <1280>; + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_SW>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt index 5e97a9593ad7..b98b291a31ba 100644 --- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt +++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt @@ -178,7 +178,7 @@ see regulator.txt - with additional custom properties described below: - qcom,force-mode: Usage: optional (default if no other qcom,force-mode is specified) Value type: <u32> - Defintion: indicates that the regulator should be forced to a + Definition: indicates that the regulator should be forced to a particular mode, valid values are: QCOM_RPM_FORCE_MODE_NONE - do not force any mode QCOM_RPM_FORCE_MODE_LPM - force into low power mode @@ -204,7 +204,7 @@ see regulator.txt - with additional custom properties described below: - qcom,force-mode: Usage: optional Value type: <u32> - Defintion: indicates that the regulator should not be forced to any + Definition: indicates that the regulator should not be forced to any particular mode, valid values are: QCOM_RPM_FORCE_MODE_NONE - do not force any mode QCOM_RPM_FORCE_MODE_LPM - force into low power mode diff --git a/Documentation/devicetree/bindings/mips/brcm/soc.txt b/Documentation/devicetree/bindings/mips/brcm/soc.txt index 7bab90cc4a7b..4a7e030e4f9b 100644 --- a/Documentation/devicetree/bindings/mips/brcm/soc.txt +++ b/Documentation/devicetree/bindings/mips/brcm/soc.txt @@ -4,7 +4,8 @@ Required properties: - compatible: "brcm,bcm3384", "brcm,bcm33843" "brcm,bcm3384-viper", "brcm,bcm33843-viper" - "brcm,bcm6328", "brcm,bcm6368", + "brcm,bcm6328", "brcm,bcm6358", "brcm,bcm6368", + "brcm,bcm63168", "brcm,bcm63268", "brcm,bcm7125", "brcm,bcm7346", "brcm,bcm7358", "brcm,bcm7360", "brcm,bcm7362", "brcm,bcm7420", "brcm,bcm7425" diff --git a/Documentation/devicetree/bindings/mips/cavium/ciu3.txt b/Documentation/devicetree/bindings/mips/cavium/ciu3.txt new file mode 100644 index 000000000000..616862ad2b71 --- /dev/null +++ b/Documentation/devicetree/bindings/mips/cavium/ciu3.txt @@ -0,0 +1,27 @@ +* Central Interrupt Unit v3 + +Properties: +- compatible: "cavium,octeon-7890-ciu3" + + Compatibility with 78XX and 73XX SOCs. + +- interrupt-controller: This is an interrupt controller. + +- reg: The base address of the CIU's register bank. + +- #interrupt-cells: Must be <2>. The first cell is source number. + The second cell indicates the triggering semantics, and may have a + value of either 4 for level semantics, or 1 for edge semantics. + +Example: + interrupt-controller@1010000000000 { + compatible = "cavium,octeon-7890-ciu3"; + interrupt-controller; + /* Interrupts are specified by two parts: + * 1) Source number (20 significant bits) + * 2) Trigger type: (4 == level, 1 == edge) + */ + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x10100 0x00000000 0x0 0xb0000000>; + }; diff --git a/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt index c7a26ca8da12..6611a7c2053a 100644 --- a/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt +++ b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt @@ -30,11 +30,90 @@ Required properties: region may not be present in some scenarios, such as in the device tree presented to a virtual machine. + - msi-parent + Value type: <phandle> + Definition: Must be present and point to the MSI controller node + handling message interrupts for the MC. + + - ranges + Value type: <prop-encoded-array> + Definition: A standard property. Defines the mapping between the child + MC address space and the parent system address space. + + The MC address space is defined by 3 components: + <region type> <offset hi> <offset lo> + + Valid values for region type are + 0x0 - MC portals + 0x1 - QBMAN portals + + - #address-cells + Value type: <u32> + Definition: Must be 3. (see definition in 'ranges' property) + + - #size-cells + Value type: <u32> + Definition: Must be 1. + +Sub-nodes: + + The fsl-mc node may optionally have dpmac sub-nodes that describe + the relationship between the Ethernet MACs which belong to the MC + and the Ethernet PHYs on the system board. + + The dpmac nodes must be under a node named "dpmacs" which contains + the following properties: + + - #address-cells + Value type: <u32> + Definition: Must be present if dpmac sub-nodes are defined and must + have a value of 1. + + - #size-cells + Value type: <u32> + Definition: Must be present if dpmac sub-nodes are defined and must + have a value of 0. + + These nodes must have the following properties: + + - compatible + Value type: <string> + Definition: Must be "fsl,qoriq-mc-dpmac". + + - reg + Value type: <prop-encoded-array> + Definition: Specifies the id of the dpmac. + + - phy-handle + Value type: <phandle> + Definition: Specifies the phandle to the PHY device node associated + with the this dpmac. + Example: fsl_mc: fsl-mc@80c000000 { compatible = "fsl,qoriq-mc"; reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ - }; + msi-parent = <&its>; + #address-cells = <3>; + #size-cells = <1>; + + /* + * Region type 0x0 - MC portals + * Region type 0x1 - QBMAN portals + */ + ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000 + 0x1 0x0 0x0 0x8 0x18000000 0x8000000>; + dpmacs { + #address-cells = <1>; + #size-cells = <0>; + + dpmac@1 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <1>; + phy-handle = <&mdio0_phy0>; + } + } + }; diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.txt b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.txt index 0cb827bf9435..3d965d57e00b 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.txt +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.txt @@ -1,7 +1,7 @@ * The simple eMMC hardware reset provider The purpose of this driver is to perform standard eMMC hw reset -procedure, as descibed by Jedec 4.4 specification. This procedure is +procedure, as described by Jedec 4.4 specification. This procedure is performed just after MMC core enabled power to the given mmc host (to fix possible issues if bootloader has left eMMC card in initialized or unknown state), and before performing complete system reboot (also in diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt index ea5614b6f613..07184e8f894e 100644 --- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt @@ -15,6 +15,7 @@ Required Properties: - "rockchip,rk3288-dw-mshc": for Rockchip RK3288 - "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3036 - "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3368 + - "rockchip,rk3399-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3399 Optional Properties: * clocks: from common clock binding: if ciu_drive and ciu_sample are diff --git a/Documentation/devicetree/bindings/mmc/sdhci-st.txt b/Documentation/devicetree/bindings/mmc/sdhci-st.txt index 18d950df2749..88faa91125bf 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-st.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-st.txt @@ -38,7 +38,7 @@ Optional properties: - bus-width: Number of data lines. See: Documentation/devicetree/bindings/mmc/mmc.txt. -- max-frequency: Can be 200MHz, 100Mz or 50MHz (default) and used for +- max-frequency: Can be 200MHz, 100Mz or 50MHz (default) and used for configuring the CCONFIG3 in the mmcss. See: Documentation/devicetree/bindings/mmc/mmc.txt. @@ -48,7 +48,7 @@ Optional properties: - vqmmc-supply: Phandle to the regulator dt node, mentioned as the vcc/vdd supply in eMMC/SD specs. -- sd-uhs--sdr50: To enable the SDR50 in the mmcss. +- sd-uhs-sdr50: To enable the SDR50 in the mmcss. See: Documentation/devicetree/bindings/mmc/mmc.txt. - sd-uhs-sdr104: To enable the SDR104 in the mmcss. diff --git a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt index 7fb746dd1a68..0f610d4b5b00 100644 --- a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt +++ b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt @@ -26,3 +26,6 @@ Required properties: Optional properties: - toshiba,mmc-wrprotect-disable: write-protect detection is unavailable +- pinctrl-names: should be "default", "state_uhs" +- pinctrl-0: should contain default/high speed pin ctrl +- pinctrl-1: should contain uhs mode pin ctrl diff --git a/Documentation/devicetree/bindings/mmc/usdhi6rol0.txt b/Documentation/devicetree/bindings/mmc/usdhi6rol0.txt index 8babdaa8623b..6d1b7971d078 100644 --- a/Documentation/devicetree/bindings/mmc/usdhi6rol0.txt +++ b/Documentation/devicetree/bindings/mmc/usdhi6rol0.txt @@ -12,6 +12,12 @@ Optional properties: - vmmc-supply: a phandle of a regulator, supplying Vcc to the card - vqmmc-supply: a phandle of a regulator, supplying VccQ to the card +- pinctrl-names: Can contain a "default" entry and a "state_uhs" + entry. The state_uhs entry is used together with the default + entry when the board requires distinct settings for UHS speeds. + +- pinctrl-N: One property for each name listed in pinctrl-names, see + ../pinctrl/pinctrl-bindings.txt. Additionally any standard mmc bindings from mmc.txt can be used. diff --git a/Documentation/devicetree/bindings/mtd/arm-versatile.txt b/Documentation/devicetree/bindings/mtd/arm-versatile.txt index beace4b89daa..4ec28796a3c0 100644 --- a/Documentation/devicetree/bindings/mtd/arm-versatile.txt +++ b/Documentation/devicetree/bindings/mtd/arm-versatile.txt @@ -1,8 +1,26 @@ Flash device on ARM Versatile board +These flash chips are found in the ARM reference designs like Integrator, +Versatile, RealView, Versatile Express etc. + +They are regular CFI compatible (Intel or AMD extended) flash chips with +some special write protect/VPP bits that can be controlled by the machine's +system controller. + Required properties: -- compatible : must be "arm,versatile-flash"; +- compatible : must be "arm,versatile-flash", "cfi-flash"; +- reg : memory address for the flash chip - bank-width : width in bytes of flash interface. +For the rest of the properties, see mtd-physmap.txt. + The device tree may optionally contain sub-nodes describing partitions of the address space. See partition.txt for more detail. + +Example: + +flash@34000000 { + compatible = "arm,versatile-flash", "cfi-flash"; + reg = <0x34000000 0x4000000>; + bank-width = <4>; +}; diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt index c2546ced9c02..7066597c9a81 100644 --- a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt +++ b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt @@ -24,6 +24,7 @@ Required properties: brcm,brcmnand-v5.0 brcm,brcmnand-v6.0 brcm,brcmnand-v6.1 + brcm,brcmnand-v6.2 brcm,brcmnand-v7.0 brcm,brcmnand-v7.1 brcm,brcmnand @@ -52,7 +53,7 @@ Optional properties: v7.0. Use this property to describe the rare earlier versions of this core that include WP - -- Additonal SoC-specific NAND controller properties -- + -- Additional SoC-specific NAND controller properties -- The NAND controller is integrated differently on the variety of SoCs on which it is found. Part of this integration involves providing status and enable bits diff --git a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt b/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt index 0333ec87dc49..c34aa6f8a424 100644 --- a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt +++ b/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt @@ -5,7 +5,8 @@ Required properties: "fsl,imx7d-qspi", "fsl,imx6ul-qspi", "fsl,ls1021a-qspi" or - "fsl,ls2080a-qspi" followed by "fsl,ls1021a-qspi" + "fsl,ls2080a-qspi" followed by "fsl,ls1021a-qspi", + "fsl,ls1043a-qspi" followed by "fsl,ls1021a-qspi" - reg : the first contains the register location and length, the second contains the memory mapping address and length - reg-names: Should contain the reg names "QuadSPI" and "QuadSPI-memory" diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt index fb733c4e1c11..3ee7e202657c 100644 --- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt +++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt @@ -13,7 +13,11 @@ Documentation/devicetree/bindings/mtd/nand.txt Required properties: - - reg: The CS line the peripheral is connected to + - compatible: "ti,omap2-nand" + - reg: range id (CS number), base offset and length of the + NAND I/O space + - interrupt-parent: must point to gpmc node + - interrupts: Two interrupt specifiers, one for fifoevent, one for termcount. Optional properties: @@ -44,6 +48,7 @@ Optional properties: locating ECC errors for BCHx algorithms. SoC devices which have ELM hardware engines should specify this device node in .dtsi Using ELM for ECC error correction frees some CPU cycles. + - rb-gpios: GPIO specifier for the ready/busy# pin. For inline partition table parsing (optional): @@ -55,20 +60,26 @@ Example for an AM33xx board: gpmc: gpmc@50000000 { compatible = "ti,am3352-gpmc"; ti,hwmods = "gpmc"; - reg = <0x50000000 0x1000000>; + reg = <0x50000000 0x36c>; interrupts = <100>; gpmc,num-cs = <8>; gpmc,num-waitpins = <2>; #address-cells = <2>; #size-cells = <1>; - ranges = <0 0 0x08000000 0x2000>; /* CS0: NAND */ + ranges = <0 0 0x08000000 0x1000000>; /* CS0 space, 16MB */ elm_id = <&elm>; + interrupt-controller; + #interrupt-cells = <2>; nand@0,0 { - reg = <0 0 0>; /* CS0, offset 0 */ + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* CS0, offset 0, NAND I/O window 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, <1 IRQ_TYPE NONE>; nand-bus-width = <16>; ti,nand-ecc-opt = "bch8"; ti,nand-xfer-type = "polled"; + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; diff --git a/Documentation/devicetree/bindings/mtd/nand.txt b/Documentation/devicetree/bindings/mtd/nand.txt index b53f92e252d4..68342eac2383 100644 --- a/Documentation/devicetree/bindings/mtd/nand.txt +++ b/Documentation/devicetree/bindings/mtd/nand.txt @@ -1,8 +1,31 @@ -* MTD generic binding +* NAND chip and NAND controller generic binding + +NAND controller/NAND chip representation: + +The NAND controller should be represented with its own DT node, and all +NAND chips attached to this controller should be defined as children nodes +of the NAND controller. This representation should be enforced even for +simple controllers supporting only one chip. + +Mandatory NAND controller properties: +- #address-cells: depends on your controller. Should at least be 1 to + encode the CS line id. +- #size-cells: depends on your controller. Put zero unless you need a + mapping between CS lines and dedicated memory regions + +Optional NAND controller properties +- ranges: only needed if you need to define a mapping between CS lines and + memory regions + +Optional NAND chip properties: - nand-ecc-mode : String, operation mode of the NAND ecc mode. - Supported values are: "none", "soft", "hw", "hw_syndrome", "hw_oob_first", - "soft_bch". + Supported values are: "none", "soft", "hw", "hw_syndrome", + "hw_oob_first". + Deprecated values: + "soft_bch": use "soft" and nand-ecc-algo instead +- nand-ecc-algo: string, algorithm of NAND ECC. + Supported values are: "hamming", "bch". - nand-bus-width : 8 or 16 bus width if not present 8 - nand-on-flash-bbt: boolean to enable on flash bbt option if not present false @@ -19,3 +42,19 @@ errors per {size} bytes". The interpretation of these parameters is implementation-defined, so not all implementations must support all possible combinations. However, implementations are encouraged to further specify the value(s) they support. + +Example: + + nand-controller { + #address-cells = <1>; + #size-cells = <0>; + + /* controller specific properties */ + + nand@0 { + reg = <0>; + nand-ecc-mode = "soft_bch"; + + /* controller specific properties */ + }; + }; diff --git a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt index 078060a97f95..05f705e32a4a 100644 --- a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt +++ b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt @@ -18,6 +18,8 @@ Required properties for all the ethernet interfaces: - First is the Rx interrupt. This irq is mandatory. - Second is the Tx completion interrupt. This is supported only on SGMII based 1GbE and 10GbE interfaces. +- channel: Ethernet to CPU, start channel (prefetch buffer) number + - Must map to the first irq and irqs must be sequential - port-id: Port number (0 or 1) - clocks: Reference to the clock entry. - local-mac-address: MAC address assigned to this device diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.txt b/Documentation/devicetree/bindings/net/dsa/dsa.txt index 5fdbbcdf8c4b..9f4807f90c31 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa.txt +++ b/Documentation/devicetree/bindings/net/dsa/dsa.txt @@ -31,8 +31,6 @@ A switch child node has the following optional property: switch. Must be set if the switch can not detect the presence and/or size of a connected EEPROM, otherwise optional. -- reset-gpios : phandle and specifier to a gpio line connected to - reset pin of the switch chip. A switch may have multiple "port" children nodes diff --git a/Documentation/devicetree/bindings/net/dsa/marvell.txt b/Documentation/devicetree/bindings/net/dsa/marvell.txt new file mode 100644 index 000000000000..7629189398aa --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/marvell.txt @@ -0,0 +1,35 @@ +Marvell DSA Switch Device Tree Bindings +--------------------------------------- + +WARNING: This binding is currently unstable. Do not program it into a +FLASH never to be changed again. Once this binding is stable, this +warning will be removed. + +If you need a stable binding, use the old dsa.txt binding. + +Marvell Switches are MDIO devices. The following properties should be +placed as a child node of an mdio device. + +The properties described here are those specific to Marvell devices. +Additional required and optional properties can be found in dsa.txt. + +Required properties: +- compatible : Should be one of "marvell,mv88e6085", +- reg : Address on the MII bus for the switch. + +Optional properties: + +- reset-gpios : Should be a gpio specifier for a reset line + +Example: + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0: switch@0 { + compatible = "marvell,mv88e6085"; + reg = <0>; + reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt b/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt index ecacfa44b1eb..d4b7f2e49984 100644 --- a/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt +++ b/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt @@ -7,19 +7,45 @@ Required properties: - mode: dsa fabric mode string. only support one of dsaf modes like these: "2port-64vf", "6port-16rss", - "6port-16vf". + "6port-16vf", + "single-port". - interrupt-parent: the interrupt parent of this device. - interrupts: should contain the DSA Fabric and rcb interrupt. - reg: specifies base physical address(es) and size of the device registers. - The first region is external interface control register base and size. - The second region is SerDes base register and size. + The first region is external interface control register base and size(optional, + only used when subctrl-syscon does not exist). It is recommended using + subctrl-syscon rather than this address. + The second region is SerDes base register and size(optional, only used when + serdes-syscon in port node does not exist). It is recommended using + serdes-syscon rather than this address. The third region is the PPE register base and size. - The fourth region is dsa fabric base register and size. - The fifth region is cpld base register and size, it is not required if do not use cpld. -- phy-handle: phy handle of physicl port, 0 if not any phy device. see ethernet.txt [1]. + The fourth region is dsa fabric base register and size. It is not required for + single-port mode. +- reg-names: may be ppe-base and(or) dsaf-base. It is used to find the + corresponding reg's index. + +- phy-handle: phy handle of physical port, 0 if not any phy device. It is optional + attribute. If port node exists, phy-handle in each port node will be used. + see ethernet.txt [1]. +- subctrl-syscon: is syscon handle for external interface control register. +- reset-field-offset: is offset of reset field. Its value depends on the hardware + user manual. - buf-size: rx buffer size, should be 16-1024. - desc-num: number of description in TX and RX queue, should be 512, 1024, 2048 or 4096. +- port: subnodes of dsaf. A dsaf node may contain several port nodes(Depending + on mode of dsaf). Port node contain some attributes listed below: +- reg: is physical port index in one dsaf. +- phy-handle: phy handle of physical port. It is not required if there isn't + phy device. see ethernet.txt [1]. +- serdes-syscon: is syscon handle for SerDes register. +- cpld-syscon: is syscon handle + register offset pair for cpld register. It is + not required if there isn't cpld device. +- port-rst-offset: is offset of reset field for each port in dsaf. Its value + depends on the hardware user manual. +- port-mode-offset: is offset of port mode field for each port in dsaf. Its + value depends on the hardware user manual. + [1] Documentation/devicetree/bindings/net/phy.txt Example: @@ -28,11 +54,11 @@ dsaf0: dsa@c7000000 { compatible = "hisilicon,hns-dsaf-v1"; mode = "6port-16rss"; interrupt-parent = <&mbigen_dsa>; - reg = <0x0 0xC0000000 0x0 0x420000 - 0x0 0xC2000000 0x0 0x300000 - 0x0 0xc5000000 0x0 0x890000 + reg = <0x0 0xc5000000 0x0 0x890000 0x0 0xc7000000 0x0 0x60000>; - phy-handle = <0 0 0 0 &soc0_phy4 &soc0_phy5 0 0>; + reg-names = "ppe-base", "dsaf-base"; + subctrl-syscon = <&subctrl>; + reset-field-offset = 0; interrupts = <131 4>,<132 4>, <133 4>,<134 4>, <135 4>,<136 4>, <137 4>,<138 4>, <139 4>,<140 4>, <141 4>,<142 4>, @@ -43,4 +69,15 @@ dsaf0: dsa@c7000000 { buf-size = <4096>; desc-num = <1024>; dma-coherent; + + port@0 { + reg = 0; + phy-handle = <&phy0>; + serdes-syscon = <&serdes>; + }; + + port@1 { + reg = 1; + serdes-syscon = <&serdes>; + }; }; diff --git a/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt b/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt index e6a9d1c30878..f0421ee3c714 100644 --- a/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt +++ b/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt @@ -8,7 +8,7 @@ Required properties: specifies a reference to the associating hardware driver node. see Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt - port-id: is the index of port provided by DSAF (the accelerator). DSAF can - connect to 8 PHYs. Port 0 to 1 are both used for adminstration purpose. They + connect to 8 PHYs. Port 0 to 1 are both used for administration purpose. They are called debug ports. The remaining 6 PHYs are taken according to the mode of DSAF. @@ -36,6 +36,34 @@ Required properties: | | | | | | external port + This attribute is remained for compatible purpose. It is not recommended to + use it in new code. + +- port-idx-in-ae: is the index of port provided by AE. + In NIC mode of DSAF, all 6 PHYs of service DSAF are taken as ethernet ports + to the CPU. The port-idx-in-ae can be 0 to 5. Here is the diagram: + +-----+---------------+ + | CPU | + +-+-+-+---+-+-+-+-+-+-+ + | | | | | | | | + debug debug service + port port port + (0) (0) (0-5) + + In Switch mode of DSAF, all 6 PHYs of service DSAF are taken as physical + ports connected to a LAN Switch while the CPU side assume itself have one + single NIC connected to this switch. In this case, the port-idx-in-ae + will be 0 only. + +-----+-----+------+------+ + | CPU | + +-+-+-+-+-+-+-+-+-+-+-+-+-+ + | | service| port(0) + debug debug +------------+ + port port | switch | + (0) (0) +-+-+-+-+-+-++ + | | | | | | + external port + - local-mac-address: mac addr of the ethernet interface Example: @@ -43,6 +71,6 @@ Example: ethernet@0{ compatible = "hisilicon,hns-nic-v1"; ae-handle = <&dsaf0>; - port-id = <0>; + port-idx-in-ae = <0>; local-mac-address = [a2 14 e4 4b 56 76]; }; diff --git a/Documentation/devicetree/bindings/net/marvell-bt-sd8xxx.txt b/Documentation/devicetree/bindings/net/marvell-bt-sd8xxx.txt new file mode 100644 index 000000000000..14aa6cf58201 --- /dev/null +++ b/Documentation/devicetree/bindings/net/marvell-bt-sd8xxx.txt @@ -0,0 +1,56 @@ +Marvell 8897/8997 (sd8897/sd8997) bluetooth SDIO devices +------ + +Required properties: + + - compatible : should be one of the following: + * "marvell,sd8897-bt" + * "marvell,sd8997-bt" + +Optional properties: + + - marvell,cal-data: Calibration data downloaded to the device during + initialization. This is an array of 28 values(u8). + + - marvell,wakeup-pin: It represents wakeup pin number of the bluetooth chip. + firmware will use the pin to wakeup host system. + - marvell,wakeup-gap-ms: wakeup gap represents wakeup latency of the host + platform. The value will be configured to firmware. This + is needed to work chip's sleep feature as expected. + - interrupt-parent: phandle of the parent interrupt controller + - interrupts : interrupt pin number to the cpu. Driver will request an irq based + on this interrupt number. During system suspend, the irq will be + enabled so that the bluetooth chip can wakeup host platform under + certain condition. During system resume, the irq will be disabled + to make sure unnecessary interrupt is not received. + +Example: + +IRQ pin 119 is used as system wakeup source interrupt. +wakeup pin 13 and gap 100ms are configured so that firmware can wakeup host +using this device side pin and wakeup latency. +calibration data is also available in below example. + +&mmc3 { + status = "okay"; + vmmc-supply = <&wlan_en_reg>; + bus-width = <4>; + cap-power-off-card; + keep-power-in-suspend; + + #address-cells = <1>; + #size-cells = <0>; + btmrvl: bluetooth@2 { + compatible = "marvell,sd8897-bt"; + reg = <2>; + interrupt-parent = <&pio>; + interrupts = <119 IRQ_TYPE_LEVEL_LOW>; + + marvell,cal-data = /bits/ 8 < + 0x37 0x01 0x1c 0x00 0xff 0xff 0xff 0xff 0x01 0x7f 0x04 0x02 + 0x00 0x00 0xba 0xce 0xc0 0xc6 0x2d 0x00 0x00 0x00 0x00 0x00 + 0x00 0x00 0xf0 0x00>; + marvell,wakeup-pin = <0x0d>; + marvell,wakeup-gap-ms = <0x64>; + }; +}; diff --git a/Documentation/devicetree/bindings/net/microchip,enc28j60.txt b/Documentation/devicetree/bindings/net/microchip,enc28j60.txt new file mode 100644 index 000000000000..1dc3bc75539d --- /dev/null +++ b/Documentation/devicetree/bindings/net/microchip,enc28j60.txt @@ -0,0 +1,59 @@ +* Microchip ENC28J60 + +This is a standalone 10 MBit ethernet controller with SPI interface. + +For each device connected to a SPI bus, define a child node within +the SPI master node. + +Required properties: +- compatible: Should be "microchip,enc28j60" +- reg: Specify the SPI chip select the ENC28J60 is wired to +- interrupt-parent: Specify the phandle of the source interrupt, see interrupt + binding documentation for details. Usually this is the GPIO bank + the interrupt line is wired to. +- interrupts: Specify the interrupt index within the interrupt controller (referred + to above in interrupt-parent) and interrupt type. The ENC28J60 natively + generates falling edge interrupts, however, additional board logic + might invert the signal. +- pinctrl-names: List of assigned state names, see pinctrl binding documentation. +- pinctrl-0: List of phandles to configure the GPIO pin used as interrupt line, + see also generic and your platform specific pinctrl binding + documentation. + +Optional properties: +- spi-max-frequency: Maximum frequency of the SPI bus when accessing the ENC28J60. + According to the ENC28J80 datasheet, the chip allows a maximum of 20 MHz, however, + board designs may need to limit this value. +- local-mac-address: See ethernet.txt in the same directory. + + +Example (for NXP i.MX28 with pin control stuff for GPIO irq): + + ssp2: ssp@80014000 { + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_b &spi2_sck_cfg>; + status = "okay"; + + enc28j60: ethernet@0 { + compatible = "microchip,enc28j60"; + pinctrl-names = "default"; + pinctrl-0 = <&enc28j60_pins>; + reg = <0>; + interrupt-parent = <&gpio3>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + spi-max-frequency = <12000000>; + }; + }; + + pinctrl@80018000 { + enc28j60_pins: enc28j60_pins@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_AUART0_RTS__GPIO_3_3 /* Interrupt */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt b/Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt new file mode 100644 index 000000000000..1aea822d4530 --- /dev/null +++ b/Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt @@ -0,0 +1,31 @@ +* NXP Semiconductors PN532 NFC Controller + +Required properties: +- compatible: Should be "nxp,pn532-i2c" or "nxp,pn533-i2c". +- clock-frequency: I²C work frequency. +- reg: address on the bus +- interrupt-parent: phandle for the interrupt gpio controller +- interrupts: GPIO interrupt to which the chip is connected + +Optional SoC Specific Properties: +- pinctrl-names: Contains only one value - "default". +- pintctrl-0: Specifies the pin control groups used for this controller. + +Example (for ARM-based BeagleBone with PN532 on I2C2): + +&i2c2 { + + status = "okay"; + + pn532: pn532@24 { + + compatible = "nxp,pn532-i2c"; + + reg = <0x24>; + clock-frequency = <400000>; + + interrupt-parent = <&gpio1>; + interrupts = <17 IRQ_TYPE_EDGE_FALLING>; + + }; +}; diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt index 6605d19601c2..95816c5fc589 100644 --- a/Documentation/devicetree/bindings/net/stmmac.txt +++ b/Documentation/devicetree/bindings/net/stmmac.txt @@ -51,14 +51,16 @@ Optional properties: AXI register inside the DMA module: - snps,lpi_en: enable Low Power Interface - snps,xit_frm: unlock on WoL - - snps,wr_osr_lmt: max write oustanding req. limit - - snps,rd_osr_lmt: max read oustanding req. limit + - snps,wr_osr_lmt: max write outstanding req. limit + - snps,rd_osr_lmt: max read outstanding req. limit - snps,kbbe: do not cross 1KiB boundary. - snps,axi_all: align address - snps,blen: this is a vector of supported burst length. - snps,fb: fixed-burst - snps,mb: mixed-burst - snps,rb: rebuild INCRx Burst + - snps,tso: this enables the TSO feature otherwise it will be managed by + MAC HW capability register. - mdio: with compatible = "snps,dwmac-mdio", create and register mdio bus. Examples: diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.txt b/Documentation/devicetree/bindings/net/ti,dp83867.txt index 58d935b58598..5d21141a68b5 100644 --- a/Documentation/devicetree/bindings/net/ti,dp83867.txt +++ b/Documentation/devicetree/bindings/net/ti,dp83867.txt @@ -2,7 +2,7 @@ Required properties: - reg - The ID number for the phy, usually a small integer - - ti,rx-internal-delay - RGMII Recieve Clock Delay - see dt-bindings/net/ti-dp83867.h + - ti,rx-internal-delay - RGMII Receive Clock Delay - see dt-bindings/net/ti-dp83867.h for applicable values - ti,tx-internal-delay - RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h for applicable values diff --git a/Documentation/devicetree/bindings/net/wireless/marvell-sd8xxx.txt b/Documentation/devicetree/bindings/net/wireless/marvell-sd8xxx.txt new file mode 100644 index 000000000000..c421aba0a5bc --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/marvell-sd8xxx.txt @@ -0,0 +1,63 @@ +Marvell 8897/8997 (sd8897/sd8997) SDIO devices +------ + +This node provides properties for controlling the marvell sdio wireless device. +The node is expected to be specified as a child node to the SDIO controller that +connects the device to the system. + +Required properties: + + - compatible : should be one of the following: + * "marvell,sd8897" + * "marvell,sd8997" + +Optional properties: + + - marvell,caldata* : A series of properties with marvell,caldata prefix, + represent calibration data downloaded to the device during + initialization. This is an array of unsigned 8-bit values. + the properties should follow below property name and + corresponding array length: + "marvell,caldata-txpwrlimit-2g" (length = 566). + "marvell,caldata-txpwrlimit-5g-sub0" (length = 502). + "marvell,caldata-txpwrlimit-5g-sub1" (length = 688). + "marvell,caldata-txpwrlimit-5g-sub2" (length = 750). + "marvell,caldata-txpwrlimit-5g-sub3" (length = 502). + - marvell,wakeup-pin : a wakeup pin number of wifi chip which will be configured + to firmware. Firmware will wakeup the host using this pin + during suspend/resume. + - interrupt-parent: phandle of the parent interrupt controller + - interrupts : interrupt pin number to the cpu. driver will request an irq based on + this interrupt number. during system suspend, the irq will be enabled + so that the wifi chip can wakeup host platform under certain condition. + during system resume, the irq will be disabled to make sure + unnecessary interrupt is not received. + +Example: + +Tx power limit calibration data is configured in below example. +The calibration data is an array of unsigned values, the length +can vary between hw versions. +IRQ pin 38 is used as system wakeup source interrupt. wakeup pin 3 is configured +so that firmware can wakeup host using this device side pin. + +&mmc3 { + status = "okay"; + vmmc-supply = <&wlan_en_reg>; + bus-width = <4>; + cap-power-off-card; + keep-power-in-suspend; + + #address-cells = <1>; + #size-cells = <0>; + mwifiex: wifi@1 { + compatible = "marvell,sd8897"; + reg = <1>; + interrupt-parent = <&pio>; + interrupts = <38 IRQ_TYPE_LEVEL_LOW>; + + marvell,caldata_00_txpwrlimit_2g_cfg_set = /bits/ 8 < + 0x01 0x00 0x06 0x00 0x08 0x02 0x89 0x01>; + marvell,wakeup-pin = <3>; + }; +}; diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt index 96aae6b4f736..74d7f0af209c 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt @@ -5,12 +5,18 @@ Required properties: * "qcom,ath10k" * "qcom,ipq4019-wifi" -PCI based devices uses compatible string "qcom,ath10k" and takes only -calibration data via "qcom,ath10k-calibration-data". Rest of the properties -are not applicable for PCI based devices. +PCI based devices uses compatible string "qcom,ath10k" and takes calibration +data along with board specific data via "qcom,ath10k-calibration-data". +Rest of the properties are not applicable for PCI based devices. AHB based devices (i.e. ipq4019) uses compatible string "qcom,ipq4019-wifi" -and also uses most of the properties defined in this doc. +and also uses most of the properties defined in this doc (except +"qcom,ath10k-calibration-data"). It uses "qcom,ath10k-pre-calibration-data" +to carry pre calibration data. + +In general, entry "qcom,ath10k-pre-calibration-data" and +"qcom,ath10k-calibration-data" conflict with each other and only one +can be provided per device. Optional properties: - reg: Address and length of the register set for the device. @@ -35,8 +41,11 @@ Optional properties: - qcom,msi_addr: MSI interrupt address. - qcom,msi_base: Base value to add before writing MSI data into MSI address register. -- qcom,ath10k-calibration-data : calibration data as an array, the - length can vary between hw versions +- qcom,ath10k-calibration-data : calibration data + board specific data + as an array, the length can vary between + hw versions. +- qcom,ath10k-pre-calibration-data : pre calibration data as an array, + the length can vary between hw versions. Example (to supply the calibration data alone): @@ -105,5 +114,5 @@ wifi0: wifi@a000000 { "legacy"; qcom,msi_addr = <0x0b006040>; qcom,msi_base = <0x40>; - qcom,ath10k-calibration-data = [ 01 02 03 ... ]; + qcom,ath10k-pre-calibration-data = [ 01 02 03 ... ]; }; diff --git a/Documentation/devicetree/bindings/numa.txt b/Documentation/devicetree/bindings/numa.txt new file mode 100644 index 000000000000..21b35053ca5a --- /dev/null +++ b/Documentation/devicetree/bindings/numa.txt @@ -0,0 +1,275 @@ +============================================================================== +NUMA binding description. +============================================================================== + +============================================================================== +1 - Introduction +============================================================================== + +Systems employing a Non Uniform Memory Access (NUMA) architecture contain +collections of hardware resources including processors, memory, and I/O buses, +that comprise what is commonly known as a NUMA node. +Processor accesses to memory within the local NUMA node is generally faster +than processor accesses to memory outside of the local NUMA node. +DT defines interfaces that allow the platform to convey NUMA node +topology information to OS. + +============================================================================== +2 - numa-node-id +============================================================================== + +For the purpose of identification, each NUMA node is associated with a unique +token known as a node id. For the purpose of this binding +a node id is a 32-bit integer. + +A device node is associated with a NUMA node by the presence of a +numa-node-id property which contains the node id of the device. + +Example: + /* numa node 0 */ + numa-node-id = <0>; + + /* numa node 1 */ + numa-node-id = <1>; + +============================================================================== +3 - distance-map +============================================================================== + +The optional device tree node distance-map describes the relative +distance (memory latency) between all numa nodes. + +- compatible : Should at least contain "numa-distance-map-v1". + +- distance-matrix + This property defines a matrix to describe the relative distances + between all numa nodes. + It is represented as a list of node pairs and their relative distance. + + Note: + 1. Each entry represents distance from first node to second node. + The distances are equal in either direction. + 2. The distance from a node to self (local distance) is represented + with value 10 and all internode distance should be represented with + a value greater than 10. + 3. distance-matrix should have entries in lexicographical ascending + order of nodes. + 4. There must be only one device node distance-map which must + reside in the root node. + 5. If the distance-map node is not present, a default + distance-matrix is used. + +Example: + 4 nodes connected in mesh/ring topology as below, + + 0_______20______1 + | | + | | + 20 20 + | | + | | + |_______________| + 3 20 2 + + if relative distance for each hop is 20, + then internode distance would be, + 0 -> 1 = 20 + 1 -> 2 = 20 + 2 -> 3 = 20 + 3 -> 0 = 20 + 0 -> 2 = 40 + 1 -> 3 = 40 + + and dt presentation for this distance matrix is, + + distance-map { + compatible = "numa-distance-map-v1"; + distance-matrix = <0 0 10>, + <0 1 20>, + <0 2 40>, + <0 3 20>, + <1 0 20>, + <1 1 10>, + <1 2 20>, + <1 3 40>, + <2 0 40>, + <2 1 20>, + <2 2 10>, + <2 3 20>, + <3 0 20>, + <3 1 40>, + <3 2 20>, + <3 3 10>; + }; + +============================================================================== +4 - Example dts +============================================================================== + +Dual socket system consists of 2 boards connected through ccn bus and +each board having one socket/soc of 8 cpus, memory and pci bus. + + memory@c00000 { + device_type = "memory"; + reg = <0x0 0xc00000 0x0 0x80000000>; + /* node 0 */ + numa-node-id = <0>; + }; + + memory@10000000000 { + device_type = "memory"; + reg = <0x100 0x0 0x0 0x80000000>; + /* node 1 */ + numa-node-id = <1>; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "psci"; + /* node 0 */ + numa-node-id = <0>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "psci"; + numa-node-id = <0>; + }; + cpu@2 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x2>; + enable-method = "psci"; + numa-node-id = <0>; + }; + cpu@3 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x3>; + enable-method = "psci"; + numa-node-id = <0>; + }; + cpu@4 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x4>; + enable-method = "psci"; + numa-node-id = <0>; + }; + cpu@5 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x5>; + enable-method = "psci"; + numa-node-id = <0>; + }; + cpu@6 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x6>; + enable-method = "psci"; + numa-node-id = <0>; + }; + cpu@7 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x7>; + enable-method = "psci"; + numa-node-id = <0>; + }; + cpu@8 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x8>; + enable-method = "psci"; + /* node 1 */ + numa-node-id = <1>; + }; + cpu@9 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x9>; + enable-method = "psci"; + numa-node-id = <1>; + }; + cpu@a { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0xa>; + enable-method = "psci"; + numa-node-id = <1>; + }; + cpu@b { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0xb>; + enable-method = "psci"; + numa-node-id = <1>; + }; + cpu@c { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0xc>; + enable-method = "psci"; + numa-node-id = <1>; + }; + cpu@d { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0xd>; + enable-method = "psci"; + numa-node-id = <1>; + }; + cpu@e { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0xe>; + enable-method = "psci"; + numa-node-id = <1>; + }; + cpu@f { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0xf>; + enable-method = "psci"; + numa-node-id = <1>; + }; + }; + + pcie0: pcie0@848000000000 { + compatible = "arm,armv8"; + device_type = "pci"; + bus-range = <0 255>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0x8480 0x00000000 0 0x10000000>; /* Configuration space */ + ranges = <0x03000000 0x8010 0x00000000 0x8010 0x00000000 0x70 0x00000000>; + /* node 0 */ + numa-node-id = <0>; + }; + + pcie1: pcie1@948000000000 { + compatible = "arm,armv8"; + device_type = "pci"; + bus-range = <0 255>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0x9480 0x00000000 0 0x10000000>; /* Configuration space */ + ranges = <0x03000000 0x9010 0x00000000 0x9010 0x00000000 0x70 0x00000000>; + /* node 1 */ + numa-node-id = <1>; + }; + + distance-map { + compatible = "numa-distance-map-v1"; + distance-matrix = <0 0 10>, + <0 1 20>, + <1 1 10>; + }; diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt index 601256fe8c0d..ee91cbdd95ee 100644 --- a/Documentation/devicetree/bindings/opp/opp.txt +++ b/Documentation/devicetree/bindings/opp/opp.txt @@ -45,7 +45,7 @@ Devices supporting OPPs must set their "operating-points-v2" property with phandle to a OPP table in their DT node. The OPP core will use this phandle to find the operating points for the device. -If required, this can be extended for SoC vendor specfic bindings. Such bindings +If required, this can be extended for SoC vendor specific bindings. Such bindings should be documented as Documentation/devicetree/bindings/power/<vendor>-opp.txt and should have a compatible description like: "operating-points-v2-<vendor>". diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt index 64f2fff12128..6c5322c55411 100644 --- a/Documentation/devicetree/bindings/pci/designware-pcie.txt +++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt @@ -31,7 +31,7 @@ Optional properties: Example configuration: - pcie: pcie@0xdffff000 { + pcie: pcie@dffff000 { compatible = "snps,dw-pcie"; reg = <0xdffff000 0x1000>, /* Controller registers */ <0xd0000000 0x2000>; /* PCI config space */ diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt index 3be80c68941a..83aeb1f5a645 100644 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt @@ -4,8 +4,8 @@ This PCIe host controller is based on the Synopsis Designware PCIe IP and thus inherits all the common properties defined in designware-pcie.txt. Required properties: -- compatible: "fsl,imx6q-pcie" -- reg: base addresse and length of the pcie controller +- compatible: "fsl,imx6q-pcie", "fsl,imx6sx-pcie", "fsl,imx6qp-pcie" +- reg: base address and length of the PCIe controller - interrupts: A list of interrupt outputs of the controller. Must contain an entry for each entry in the interrupt-names property. - interrupt-names: Must include the following entries: @@ -19,6 +19,20 @@ Optional properties: - fsl,tx-deemph-gen2-6db: Gen2 (6db) De-emphasis value. Default: 20 - fsl,tx-swing-full: Gen2 TX SWING FULL value. Default: 127 - fsl,tx-swing-low: TX launch amplitude swing_low value. Default: 127 +- fsl,max-link-speed: Specify PCI gen for link capability. Must be '2' for + gen2, otherwise will default to gen1. Note that the IMX6 LVDS clock outputs + do not meet gen2 jitter requirements and thus for gen2 capability a gen2 + compliant clock generator should be used and configured. +- reset-gpio: Should specify the GPIO for controlling the PCI bus device reset + signal. It's not polarity aware and defaults to active-low reset sequence + (L=reset state, H=operation state). +- reset-gpio-active-high: If present then the reset sequence using the GPIO + specified in the "reset-gpio" property is reversed (H=reset state, + L=operation state). + +Additional required properties for imx6sx-pcie: +- clock names: Must include the following additional entries: + - "pcie_inbound_axi" Example: diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt index b721beacfe4d..59c2f47aa303 100644 --- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt +++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt @@ -34,11 +34,11 @@ Hip05 Example (note that Hip06 is the same except compatible): ranges = <0x82000000 0 0x00000000 0x220 0x00000000 0 0x10000000>; num-lanes = <8>; port-id = <1>; - #interrupts-cells = <1>; - interrupts-map-mask = <0xf800 0 0 7>; - interrupts-map = <0x0 0 0 1 &mbigen_pcie 1 10 - 0x0 0 0 2 &mbigen_pcie 2 11 - 0x0 0 0 3 &mbigen_pcie 3 12 - 0x0 0 0 4 &mbigen_pcie 4 13>; + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0x0 0 0 1 &mbigen_pcie 1 10 + 0x0 0 0 2 &mbigen_pcie 2 11 + 0x0 0 0 3 &mbigen_pcie 3 12 + 0x0 0 0 4 &mbigen_pcie 4 13>; status = "ok"; }; diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt index 75321ae23c08..b8cc395fffea 100644 --- a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt @@ -60,11 +60,14 @@ Required properties: - afi - pcie_x -Required properties on Tegra124 and later: +Required properties on Tegra124 and later (deprecated): - phys: Must contain an entry for each entry in phy-names. - phy-names: Must include the following entries: - pcie +These properties are deprecated in favour of per-lane PHYs define in each of +the root ports (see below). + Power supplies for Tegra20: - avdd-pex-supply: Power supply for analog PCIe logic. Must supply 1.05 V. - vdd-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V. @@ -122,11 +125,22 @@ Required properties: - Root port 0 uses 4 lanes, root port 1 is unused. - Both root ports use 2 lanes. -Example: +Required properties for Tegra124 and later: +- phys: Must contain an phandle to a PHY for each entry in phy-names. +- phy-names: Must include an entry for each active lane. Note that the number + of entries does not have to (though usually will) be equal to the specified + number of lanes in the nvidia,num-lanes property. Entries are of the form + "pcie-N": where N ranges from 0 to the value specified in nvidia,num-lanes. + +Examples: +========= + +Tegra20: +-------- SoC DTSI: - pcie-controller { + pcie-controller@80003000 { compatible = "nvidia,tegra20-pcie"; device_type = "pci"; reg = <0x80003000 0x00000800 /* PADS registers */ @@ -186,10 +200,9 @@ SoC DTSI: }; }; - Board DTS: - pcie-controller { + pcie-controller@80003000 { status = "okay"; vdd-supply = <&pci_vdd_reg>; @@ -222,3 +235,204 @@ if a device on the PCI bus provides a non-probeable bus such as I2C or SPI, device nodes need to be added in order to allow the bus' children to be instantiated at the proper location in the operating system's device tree (as illustrated by the optional nodes in the example above). + +Tegra30: +-------- + +SoC DTSI: + + pcie-controller@00003000 { + compatible = "nvidia,tegra30-pcie"; + device_type = "pci"; + reg = <0x00003000 0x00000800 /* PADS registers */ + 0x00003800 0x00000200 /* AFI registers */ + 0x10000000 0x10000000>; /* configuration space */ + reg-names = "pads", "afi", "cs"; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH /* controller interrupt */ + GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &intc GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + + bus-range = <0x00 0xff>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x82000000 0 0x00000000 0x00000000 0 0x00001000 /* port 0 configuration space */ + 0x82000000 0 0x00001000 0x00001000 0 0x00001000 /* port 1 configuration space */ + 0x82000000 0 0x00004000 0x00004000 0 0x00001000 /* port 2 configuration space */ + 0x81000000 0 0 0x02000000 0 0x00010000 /* downstream I/O */ + 0x82000000 0 0x20000000 0x20000000 0 0x08000000 /* non-prefetchable memory */ + 0xc2000000 0 0x28000000 0x28000000 0 0x18000000>; /* prefetchable memory */ + + clocks = <&tegra_car TEGRA30_CLK_PCIE>, + <&tegra_car TEGRA30_CLK_AFI>, + <&tegra_car TEGRA30_CLK_PLL_E>, + <&tegra_car TEGRA30_CLK_CML0>; + clock-names = "pex", "afi", "pll_e", "cml"; + resets = <&tegra_car 70>, + <&tegra_car 72>, + <&tegra_car 74>; + reset-names = "pex", "afi", "pcie_x"; + status = "disabled"; + + pci@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x00000000 0 0x1000>; + reg = <0x000800 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <2>; + }; + + pci@2,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0x00001000 0 0x1000>; + reg = <0x001000 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <2>; + }; + + pci@3,0 { + device_type = "pci"; + assigned-addresses = <0x82001800 0 0x00004000 0 0x1000>; + reg = <0x001800 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <2>; + }; + }; + +Board DTS: + + pcie-controller@00003000 { + status = "okay"; + + avdd-pexa-supply = <&ldo1_reg>; + vdd-pexa-supply = <&ldo1_reg>; + avdd-pexb-supply = <&ldo1_reg>; + vdd-pexb-supply = <&ldo1_reg>; + avdd-pex-pll-supply = <&ldo1_reg>; + avdd-plle-supply = <&ldo1_reg>; + vddio-pex-ctl-supply = <&sys_3v3_reg>; + hvdd-pex-supply = <&sys_3v3_pexs_reg>; + + pci@1,0 { + status = "okay"; + }; + + pci@3,0 { + status = "okay"; + }; + }; + +Tegra124: +--------- + +SoC DTSI: + + pcie-controller@01003000 { + compatible = "nvidia,tegra124-pcie"; + device_type = "pci"; + reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */ + 0x0 0x01003800 0x0 0x00000800 /* AFI registers */ + 0x0 0x02000000 0x0 0x10000000>; /* configuration space */ + reg-names = "pads", "afi", "cs"; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + + bus-range = <0x00 0xff>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x82000000 0 0x01000000 0x0 0x01000000 0 0x00001000 /* port 0 configuration space */ + 0x82000000 0 0x01001000 0x0 0x01001000 0 0x00001000 /* port 1 configuration space */ + 0x81000000 0 0x0 0x0 0x12000000 0 0x00010000 /* downstream I/O (64 KiB) */ + 0x82000000 0 0x13000000 0x0 0x13000000 0 0x0d000000 /* non-prefetchable memory (208 MiB) */ + 0xc2000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */ + + clocks = <&tegra_car TEGRA124_CLK_PCIE>, + <&tegra_car TEGRA124_CLK_AFI>, + <&tegra_car TEGRA124_CLK_PLL_E>, + <&tegra_car TEGRA124_CLK_CML0>; + clock-names = "pex", "afi", "pll_e", "cml"; + resets = <&tegra_car 70>, + <&tegra_car 72>, + <&tegra_car 74>; + reset-names = "pex", "afi", "pcie_x"; + status = "disabled"; + + pci@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>; + reg = <0x000800 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <2>; + }; + + pci@2,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>; + reg = <0x001000 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <1>; + }; + }; + +Board DTS: + + pcie-controller@01003000 { + status = "okay"; + + avddio-pex-supply = <&vdd_1v05_run>; + dvddio-pex-supply = <&vdd_1v05_run>; + avdd-pex-pll-supply = <&vdd_1v05_run>; + hvdd-pex-supply = <&vdd_3v3_lp0>; + hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>; + vddio-pex-ctl-supply = <&vdd_3v3_lp0>; + avdd-pll-erefe-supply = <&avdd_1v05_run>; + + /* Mini PCIe */ + pci@1,0 { + phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>; + phy-names = "pcie-0"; + status = "okay"; + }; + + /* Gigabit Ethernet */ + pci@2,0 { + phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>; + phy-names = "pcie-0"; + status = "okay"; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/pci-armada8k.txt b/Documentation/devicetree/bindings/pci/pci-armada8k.txt new file mode 100644 index 000000000000..598533a57d79 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/pci-armada8k.txt @@ -0,0 +1,38 @@ +* Marvell Armada 7K/8K PCIe interface + +This PCIe host controller is based on the Synopsis Designware PCIe IP +and thus inherits all the common properties defined in designware-pcie.txt. + +Required properties: +- compatible: "marvell,armada8k-pcie" +- reg: must contain two register regions + - the control register region + - the config space region +- reg-names: + - "ctrl" for the control register region + - "config" for the config space region +- interrupts: Interrupt specifier for the PCIe controler +- clocks: reference to the PCIe controller clock + +Example: + + pcie@f2600000 { + compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; + reg = <0 0xf2600000 0 0x10000>, <0 0xf6f00000 0 0x80000>; + reg-names = "ctrl", "config"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + dma-coherent; + + bus-range = <0 0xff>; + ranges = <0x81000000 0 0xf9000000 0 0xf9000000 0 0x10000 /* downstream I/O */ + 0x82000000 0 0xf6000000 0 0xf6000000 0 0xf00000>; /* non-prefetchable memory */ + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + num-lanes = <1>; + clocks = <&cpm_syscon0 1 13>; + status = "disabled"; + }; diff --git a/Documentation/devicetree/bindings/pci/pci-keystone.txt b/Documentation/devicetree/bindings/pci/pci-keystone.txt index 54eae2938174..d08a4d51108f 100644 --- a/Documentation/devicetree/bindings/pci/pci-keystone.txt +++ b/Documentation/devicetree/bindings/pci/pci-keystone.txt @@ -56,6 +56,7 @@ Optional properties:- phy-names: name of the Generic Keystine SerDes phy for PCI - If boot loader already does PCI link establishment, then phys and phy-names shouldn't be present. + interrupts: platform interrupt for error interrupts. Designware DT Properties not applicable for Keystone PCI diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt new file mode 100644 index 000000000000..a7aee9ea8926 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt @@ -0,0 +1,21 @@ +Driver for Broadcom Northstar USB 2.0 PHY + +Required properties: +- compatible: brcm,ns-usb2-phy +- reg: iomem address range of DMU (Device Management Unit) +- reg-names: "dmu", the only needed & supported reg right now +- clocks: USB PHY reference clock +- clock-names: "phy-ref-clk", the only needed & supported clock right now + +To initialize USB 2.0 PHY driver needs to setup PLL correctly. To do this it +requires passing phandle to the USB PHY reference clock. + +Example: + usb2-phy { + compatible = "brcm,ns-usb2-phy"; + reg = <0x1800c000 0x1000>; + reg-names = "dmu"; + #phy-cells = <0>; + clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>; + clock-names = "phy-ref-clk"; + }; diff --git a/Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt b/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt index d87ab7c127b8..d0231209d846 100644 --- a/Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt +++ b/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt @@ -1,14 +1,17 @@ -* Broadcom SATA3 PHY for STB +* Broadcom SATA3 PHY Required properties: - compatible: should be one or more of "brcm,bcm7425-sata-phy" "brcm,bcm7445-sata-phy" + "brcm,iproc-ns2-sata-phy" "brcm,phy-sata3" - address-cells: should be 1 - size-cells: should be 0 -- reg: register range for the PHY PCB interface -- reg-names: should be "phy" +- reg: register ranges for the PHY PCB interface +- reg-names: should be "phy" and "phy-ctrl" + The "phy-ctrl" registers are only required for + "brcm,iproc-ns2-sata-phy". Sub-nodes: Each port's PHY should be represented as a sub-node. @@ -16,12 +19,12 @@ Sub-nodes: Sub-nodes required properties: - reg: the PHY number - phy-cells: generic PHY binding; must be 0 -Optional: -- brcm,enable-ssc: use spread spectrum clocking (SSC) on this port +Sub-nodes optional properties: +- brcm,enable-ssc: use spread spectrum clocking (SSC) on this port + This property is not applicable for "brcm,iproc-ns2-sata-phy". Example: - sata-phy@f0458100 { compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3"; reg = <0xf0458100 0x1e00>, <0xf045804c 0x10>; diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt new file mode 100644 index 000000000000..0bf1ae243552 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt @@ -0,0 +1,733 @@ +Device tree binding for NVIDIA Tegra XUSB pad controller +======================================================== + +The Tegra XUSB pad controller manages a set of I/O lanes (with differential +signals) which connect directly to pins/pads on the SoC package. Each lane +is controlled by a HW block referred to as a "pad" in the Tegra hardware +documentation. Each such "pad" may control either one or multiple lanes, +and thus contains any logic common to all its lanes. Each lane can be +separately configured and powered up. + +Some of the lanes are high-speed lanes, which can be used for PCIe, SATA or +super-speed USB. Other lanes are for various types of low-speed, full-speed +or high-speed USB (such as UTMI, ULPI and HSIC). The XUSB pad controller +contains a software-configurable mux that sits between the I/O controller +ports (e.g. PCIe) and the lanes. + +In addition to per-lane configuration, USB 3.0 ports may require additional +settings on a per-board basis. + +Pads will be represented as children of the top-level XUSB pad controller +device tree node. Each lane exposed by the pad will be represented by its +own subnode and can be referenced by users of the lane using the standard +PHY bindings, as described by the phy-bindings.txt file in this directory. + +The Tegra hardware documentation refers to the connection between the XUSB +pad controller and the XUSB controller as "ports". This is confusing since +"port" is typically used to denote the physical USB receptacle. The device +tree binding in this document uses the term "port" to refer to the logical +abstraction of the signals that are routed to a USB receptacle (i.e. a PHY +for the USB signal, the VBUS power supply, the USB 2.0 companion port for +USB 3.0 receptacles, ...). + +Required properties: +-------------------- +- compatible: Must be: + - Tegra124: "nvidia,tegra124-xusb-padctl" + - Tegra132: "nvidia,tegra132-xusb-padctl", "nvidia,tegra124-xusb-padctl" + - Tegra210: "nvidia,tegra210-xusb-padctl" +- reg: Physical base address and length of the controller's registers. +- resets: Must contain an entry for each entry in reset-names. +- reset-names: Must include the following entries: + - "padctl" + + +Pad nodes: +========== + +A required child node named "pads" contains a list of subnodes, one for each +of the pads exposed by the XUSB pad controller. Each pad may need additional +resources that can be referenced in its pad node. + +The "status" property is used to enable or disable the use of a pad. If set +to "disabled", the pad will not be used on the given board. In order to use +the pad and any of its lanes, this property must be set to "okay". + +For Tegra124 and Tegra132, the following pads exist: usb2, ulpi, hsic, pcie +and sata. No extra resources are required for operation of these pads. + +For Tegra210, the following pads exist: usb2, hsic, pcie and sata. Below is +a description of the properties of each pad. + +UTMI pad: +--------- + +Required properties: +- clocks: Must contain an entry for each entry in clock-names. +- clock-names: Must contain the following entries: + - "trk": phandle and specifier referring to the USB2 tracking clock + +HSIC pad: +--------- + +Required properties: +- clocks: Must contain an entry for each entry in clock-names. +- clock-names: Must contain the following entries: + - "trk": phandle and specifier referring to the HSIC tracking clock + +PCIe pad: +--------- + +Required properties: +- clocks: Must contain an entry for each entry in clock-names. +- clock-names: Must contain the following entries: + - "pll": phandle and specifier referring to the PLLE +- resets: Must contain an entry for each entry in reset-names. +- reset-names: Must contain the following entries: + - "phy": reset for the PCIe UPHY block + +SATA pad: +--------- + +Required properties: +- resets: Must contain an entry for each entry in reset-names. +- reset-names: Must contain the following entries: + - "phy": reset for the SATA UPHY block + + +PHY nodes: +========== + +Each pad node has a child named "lanes" that contains one or more children of +its own, each representing one of the lanes controlled by the pad. + +Required properties: +-------------------- +- status: Defines the operation status of the PHY. Valid values are: + - "disabled": the PHY is disabled + - "okay": the PHY is enabled +- #phy-cells: Should be 0. Since each lane represents a single PHY, there is + no need for an additional specifier. +- nvidia,function: The output function of the PHY. See below for a list of + valid functions per SoC generation. + +For Tegra124 and Tegra132, the list of valid PHY nodes is given below: +- usb2: usb2-0, usb2-1, usb2-2 + - functions: "snps", "xusb", "uart" +- ulpi: ulpi-0 + - functions: "snps", "xusb" +- hsic: hsic-0, hsic-1 + - functions: "snps", "xusb" +- pcie: pcie-0, pcie-1, pcie-2, pcie-3, pcie-4 + - functions: "pcie", "usb3-ss" +- sata: sata-0 + - functions: "usb3-ss", "sata" + +For Tegra210, the list of valid PHY nodes is given below: +- utmi: utmi-0, utmi-1, utmi-2, utmi-3 + - functions: "snps", "xusb", "uart" +- hsic: hsic-0, hsic-1 + - functions: "snps", "xusb" +- pcie: pcie-0, pcie-1, pcie-2, pcie-3, pcie-4, pcie-5, pcie-6 + - functions: "pcie-x1", "usb3-ss", "pcie-x4" +- sata: sata-0 + - functions: "usb3-ss", "sata" + + +Port nodes: +=========== + +A required child node named "ports" contains a list of all the ports exposed +by the XUSB pad controller. Per-port configuration is only required for USB. + +USB2 ports: +----------- + +Required properties: +- status: Defines the operation status of the port. Valid values are: + - "disabled": the port is disabled + - "okay": the port is enabled +- mode: A string that determines the mode in which to run the port. Valid + values are: + - "host": for USB host mode + - "device": for USB device mode + - "otg": for USB OTG mode + +Optional properties: +- nvidia,internal: A boolean property whose presence determines that a port + is internal. In the absence of this property the port is considered to be + external. +- vbus-supply: phandle to a regulator supplying the VBUS voltage. + +ULPI ports: +----------- + +Optional properties: +- status: Defines the operation status of the port. Valid values are: + - "disabled": the port is disabled + - "okay": the port is enabled +- nvidia,internal: A boolean property whose presence determines that a port + is internal. In the absence of this property the port is considered to be + external. +- vbus-supply: phandle to a regulator supplying the VBUS voltage. + +HSIC ports: +----------- + +Required properties: +- status: Defines the operation status of the port. Valid values are: + - "disabled": the port is disabled + - "okay": the port is enabled + +Optional properties: +- vbus-supply: phandle to a regulator supplying the VBUS voltage. + +Super-speed USB ports: +---------------------- + +Required properties: +- status: Defines the operation status of the port. Valid values are: + - "disabled": the port is disabled + - "okay": the port is enabled +- nvidia,usb2-companion: A single cell that specifies the physical port number + to map this super-speed USB port to. The range of valid port numbers varies + with the SoC generation: + - 0-2: for Tegra124 and Tegra132 + - 0-3: for Tegra210 + +Optional properties: +- nvidia,internal: A boolean property whose presence determines that a port + is internal. In the absence of this property the port is considered to be + external. + +For Tegra124 and Tegra132, the XUSB pad controller exposes the following +ports: +- 3x USB2: usb2-0, usb2-1, usb2-2 +- 1x ULPI: ulpi-0 +- 2x HSIC: hsic-0, hsic-1 +- 2x super-speed USB: usb3-0, usb3-1 + +For Tegra210, the XUSB pad controller exposes the following ports: +- 4x USB2: usb2-0, usb2-1, usb2-2, usb2-3 +- 2x HSIC: hsic-0, hsic-1 +- 4x super-speed USB: usb3-0, usb3-1, usb3-2, usb3-3 + + +Examples: +========= + +Tegra124 and Tegra132: +---------------------- + +SoC include: + + padctl@7009f000 { + /* for Tegra124 */ + compatible = "nvidia,tegra124-xusb-padctl"; + /* for Tegra132 */ + compatible = "nvidia,tegra132-xusb-padctl", + "nvidia,tegra124-xusb-padctl"; + reg = <0x0 0x7009f000 0x0 0x1000>; + resets = <&tegra_car 142>; + reset-names = "padctl"; + + pads { + usb2 { + status = "disabled"; + + lanes { + usb2-0 { + status = "disabled"; + #phy-cells = <0>; + }; + + usb2-1 { + status = "disabled"; + #phy-cells = <0>; + }; + + usb2-2 { + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; + + ulpi { + status = "disabled"; + + lanes { + ulpi-0 { + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; + + hsic { + status = "disabled"; + + lanes { + hsic-0 { + status = "disabled"; + #phy-cells = <0>; + }; + + hsic-1 { + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; + + pcie { + status = "disabled"; + + lanes { + pcie-0 { + status = "disabled"; + #phy-cells = <0>; + }; + + pcie-1 { + status = "disabled"; + #phy-cells = <0>; + }; + + pcie-2 { + status = "disabled"; + #phy-cells = <0>; + }; + + pcie-3 { + status = "disabled"; + #phy-cells = <0>; + }; + + pcie-4 { + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; + + sata { + status = "disabled"; + + lanes { + sata-0 { + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; + }; + + ports { + usb2-0 { + status = "disabled"; + }; + + usb2-1 { + status = "disabled"; + }; + + usb2-2 { + status = "disabled"; + }; + + ulpi-0 { + status = "disabled"; + }; + + hsic-0 { + status = "disabled"; + }; + + hsic-1 { + status = "disabled"; + }; + + usb3-0 { + status = "disabled"; + }; + + usb3-1 { + status = "disabled"; + }; + }; + }; + +Board file: + + padctl@7009f000 { + status = "okay"; + + pads { + usb2 { + status = "okay"; + + lanes { + usb2-0 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-1 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-2 { + nvidia,function = "xusb"; + status = "okay"; + }; + }; + }; + + pcie { + status = "okay"; + + lanes { + pcie-0 { + nvidia,function = "usb3-ss"; + status = "okay"; + }; + + pcie-2 { + nvidia,function = "pcie"; + status = "okay"; + }; + + pcie-4 { + nvidia,function = "pcie"; + status = "okay"; + }; + }; + }; + + sata { + status = "okay"; + + lanes { + sata-0 { + nvidia,function = "sata"; + status = "okay"; + }; + }; + }; + }; + + ports { + /* Micro A/B */ + usb2-0 { + status = "okay"; + mode = "otg"; + }; + + /* Mini PCIe */ + usb2-1 { + status = "okay"; + mode = "host"; + }; + + /* USB3 */ + usb2-2 { + status = "okay"; + mode = "host"; + + vbus-supply = <&vdd_usb3_vbus>; + }; + + usb3-0 { + nvidia,port = <2>; + status = "okay"; + }; + }; + }; + +Tegra210: +--------- + +SoC include: + + padctl@7009f000 { + compatible = "nvidia,tegra210-xusb-padctl"; + reg = <0x0 0x7009f000 0x0 0x1000>; + resets = <&tegra_car 142>; + reset-names = "padctl"; + + status = "disabled"; + + pads { + usb2 { + clocks = <&tegra_car TEGRA210_CLK_USB2_TRK>; + clock-names = "trk"; + status = "disabled"; + + lanes { + usb2-0 { + status = "disabled"; + #phy-cells = <0>; + }; + + usb2-1 { + status = "disabled"; + #phy-cells = <0>; + }; + + usb2-2 { + status = "disabled"; + #phy-cells = <0>; + }; + + usb2-3 { + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; + + hsic { + clocks = <&tegra_car TEGRA210_CLK_HSIC_TRK>; + clock-names = "trk"; + status = "disabled"; + + lanes { + hsic-0 { + status = "disabled"; + #phy-cells = <0>; + }; + + hsic-1 { + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; + + pcie { + clocks = <&tegra_car TEGRA210_CLK_PLL_E>; + clock-names = "pll"; + resets = <&tegra_car 205>; + reset-names = "phy"; + status = "disabled"; + + lanes { + pcie-0 { + status = "disabled"; + #phy-cells = <0>; + }; + + pcie-1 { + status = "disabled"; + #phy-cells = <0>; + }; + + pcie-2 { + status = "disabled"; + #phy-cells = <0>; + }; + + pcie-3 { + status = "disabled"; + #phy-cells = <0>; + }; + + pcie-4 { + status = "disabled"; + #phy-cells = <0>; + }; + + pcie-5 { + status = "disabled"; + #phy-cells = <0>; + }; + + pcie-6 { + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; + + sata { + clocks = <&tegra_car TEGRA210_CLK_PLL_E>; + clock-names = "pll"; + resets = <&tegra_car 204>; + reset-names = "phy"; + status = "disabled"; + + lanes { + sata-0 { + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; + }; + + ports { + usb2-0 { + status = "disabled"; + }; + + usb2-1 { + status = "disabled"; + }; + + usb2-2 { + status = "disabled"; + }; + + usb2-3 { + status = "disabled"; + }; + + hsic-0 { + status = "disabled"; + }; + + hsic-1 { + status = "disabled"; + }; + + usb3-0 { + status = "disabled"; + }; + + usb3-1 { + status = "disabled"; + }; + + usb3-2 { + status = "disabled"; + }; + + usb3-3 { + status = "disabled"; + }; + }; + }; + +Board file: + + padctl@7009f000 { + status = "okay"; + + pads { + usb2 { + status = "okay"; + + lanes { + usb2-0 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-1 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-2 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-3 { + nvidia,function = "xusb"; + status = "okay"; + }; + }; + }; + + pcie { + status = "okay"; + + lanes { + pcie-0 { + nvidia,function = "pcie-x1"; + status = "okay"; + }; + + pcie-1 { + nvidia,function = "pcie-x4"; + status = "okay"; + }; + + pcie-2 { + nvidia,function = "pcie-x4"; + status = "okay"; + }; + + pcie-3 { + nvidia,function = "pcie-x4"; + status = "okay"; + }; + + pcie-4 { + nvidia,function = "pcie-x4"; + status = "okay"; + }; + + pcie-5 { + nvidia,function = "usb3-ss"; + status = "okay"; + }; + + pcie-6 { + nvidia,function = "usb3-ss"; + status = "okay"; + }; + }; + }; + + sata { + status = "okay"; + + lanes { + sata-0 { + nvidia,function = "sata"; + status = "okay"; + }; + }; + }; + }; + + ports { + usb2-0 { + status = "okay"; + mode = "otg"; + }; + + usb2-1 { + status = "okay"; + vbus-supply = <&vdd_5v0_rtl>; + mode = "host"; + }; + + usb2-2 { + status = "okay"; + vbus-supply = <&vdd_usb_vbus>; + mode = "host"; + }; + + usb2-3 { + status = "okay"; + mode = "host"; + }; + + usb3-0 { + status = "okay"; + nvidia,lanes = "pcie-6"; + nvidia,port = <1>; + }; + + usb3-1 { + status = "okay"; + nvidia,lanes = "pcie-5"; + nvidia,port = <2>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/phy-lpc18xx-usb-otg.txt b/Documentation/devicetree/bindings/phy/phy-lpc18xx-usb-otg.txt index bd61b467e30a..3bb821cd6a7f 100644 --- a/Documentation/devicetree/bindings/phy/phy-lpc18xx-usb-otg.txt +++ b/Documentation/devicetree/bindings/phy/phy-lpc18xx-usb-otg.txt @@ -18,7 +18,7 @@ creg: syscon@40043000 { compatible = "nxp,lpc1850-creg", "syscon", "simple-mfd"; reg = <0x40043000 0x1000>; - usb0_otg_phy: phy@004 { + usb0_otg_phy: phy { compatible = "nxp,lpc1850-usb-otg-phy"; clocks = <&ccu1 CLK_USB0>; #phy-cells = <0>; diff --git a/Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt b/Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt index 00100cf3e037..33a2b1ee3f3e 100644 --- a/Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt +++ b/Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt @@ -4,7 +4,9 @@ mt65xx USB3.0 PHY binding This binding describes a usb3.0 phy for mt65xx platforms of Medaitek SoC. Required properties (controller (parent) node): - - compatible : should be "mediatek,mt8173-u3phy" + - compatible : should be one of + "mediatek,mt2701-u3phy" + "mediatek,mt8173-u3phy" - reg : offset and length of register for phy, exclude port's register. - clocks : a list of phandle + clock-specifier pairs, one for each diff --git a/Documentation/devicetree/bindings/phy/phy-stih41x-usb.txt b/Documentation/devicetree/bindings/phy/phy-stih41x-usb.txt index 00944a05ee6b..744b4809542e 100644 --- a/Documentation/devicetree/bindings/phy/phy-stih41x-usb.txt +++ b/Documentation/devicetree/bindings/phy/phy-stih41x-usb.txt @@ -17,7 +17,7 @@ Example: usb2_phy: usb2phy@0 { compatible = "st,stih416-usb-phy"; - #phy-cell = <0>; + #phy-cells = <0>; st,syscfg = <&syscfg_rear>; clocks = <&clk_sysin>; clock-names = "osc_phy"; diff --git a/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt b/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt index d564ba4f1cf6..91da947ae9b6 100644 --- a/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt +++ b/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt @@ -7,6 +7,12 @@ Required properties: - compatible: "renesas,usb-phy-r8a7790" if the device is a part of R8A7790 SoC. "renesas,usb-phy-r8a7791" if the device is a part of R8A7791 SoC. "renesas,usb-phy-r8a7794" if the device is a part of R8A7794 SoC. + "renesas,rcar-gen2-usb-phy" for a generic R-Car Gen2 compatible device. + + When compatible with the generic version, nodes must list the + SoC-specific version corresponding to the platform first + followed by the generic version. + - reg: offset and length of the register block. - #address-cells: number of address cells for the USB channel subnodes, must be <1>. @@ -34,7 +40,7 @@ the USB channel; see the selector meanings below: Example (Lager board): usb-phy@e6590100 { - compatible = "renesas,usb-phy-r8a7790"; + compatible = "renesas,usb-phy-r8a7790", "renesas,rcar-gen2-usb-phy"; reg = <0 0xe6590100 0 0x100>; #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt index eaf7e9b7ce6b..2281d6cdecb1 100644 --- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt +++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt @@ -6,6 +6,12 @@ This file provides information on what the device node for the R-Car generation Required properties: - compatible: "renesas,usb2-phy-r8a7795" if the device is a part of an R8A7795 SoC. + "renesas,rcar-gen3-usb2-phy" for a generic R-Car Gen3 compatible device. + + When compatible with the generic version, nodes must list the + SoC-specific version corresponding to the platform first + followed by the generic version. + - reg: offset and length of the partial USB 2.0 Host register block. - clocks: clock phandle and specifier pair(s). - #phy-cells: see phy-bindings.txt in the same directory, must be <0>. @@ -15,18 +21,20 @@ To use a USB channel where USB 2.0 Host and HSUSB (USB 2.0 Peripheral) are combined, the device tree node should set interrupt properties to use the channel as USB OTG: - interrupts: interrupt specifier for the PHY. +- vbus-supply: Phandle to a regulator that provides power to the VBUS. This + regulator will be managed during the PHY power on/off sequence. Example (R-Car H3): usb-phy@ee080200 { - compatible = "renesas,usb2-phy-r8a7795"; + compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy"; reg = <0 0xee080200 0 0x700>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7795_CLK_EHCI0>; }; usb-phy@ee0a0200 { - compatible = "renesas,usb2-phy-r8a7795"; + compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy"; reg = <0 0xee0a0200 0 0x700>; clocks = <&mstp7_clks R8A7795_CLK_EHCI0>; }; diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt index 0289d3b07853..9872ba8546bd 100644 --- a/Documentation/devicetree/bindings/phy/samsung-phy.txt +++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt @@ -2,9 +2,20 @@ Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY ------------------------------------------------- Required properties: -- compatible : should be "samsung,s5pv210-mipi-video-phy"; +- compatible : should be one of the listed compatibles: + - "samsung,s5pv210-mipi-video-phy" + - "samsung,exynos5420-mipi-video-phy" + - "samsung,exynos5433-mipi-video-phy" - #phy-cells : from the generic phy bindings, must be 1; -- syscon - phandle to the PMU system controller; + +In case of s5pv210 and exynos5420 compatible PHYs: +- syscon - phandle to the PMU system controller + +In case of exynos5433 compatible PHY: + - samsung,pmu-syscon - phandle to the PMU system controller + - samsung,disp-sysreg - phandle to the DISP system registers controller + - samsung,cam0-sysreg - phandle to the CAM0 system registers controller + - samsung,cam1-sysreg - phandle to the CAM1 system registers controller For "samsung,s5pv210-mipi-video-phy" compatible PHYs the second cell in the PHY specifier identifies the PHY and its meaning is as follows: @@ -12,6 +23,9 @@ the PHY specifier identifies the PHY and its meaning is as follows: 1 - MIPI DSIM 0, 2 - MIPI CSIS 1, 3 - MIPI DSIM 1. +"samsung,exynos5420-mipi-video-phy" and "samsung,exynos5433-mipi-video-phy" +supports additional fifth PHY: + 4 - MIPI CSIS 2. Samsung EXYNOS SoC series Display Port PHY ------------------------------------------------- diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt index 30676ded85bb..4048f43a9d29 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt @@ -1,6 +1,12 @@ Device tree binding for NVIDIA Tegra XUSB pad controller ======================================================== +NOTE: It turns out that this binding isn't an accurate description of the XUSB +pad controller. While the description is good enough for the functional subset +required for PCIe and SATA, it lacks the flexibility to represent the features +needed for USB. For the new binding, see ../phy/nvidia,tegra-xusb-padctl.txt. +The binding described in this file is deprecated and should not be used. + The Tegra XUSB pad controller manages a set of lanes, each of which can be assigned to one out of a set of different pads. Some of these pads have an associated PHY that must be powered up before the pad can be used. @@ -79,7 +85,7 @@ Example: SoC file extract: ----------------- - padctl@0,7009f000 { + padctl@7009f000 { compatible = "nvidia,tegra124-xusb-padctl"; reg = <0x0 0x7009f000 0x0 0x1000>; resets = <&tegra_car 142>; @@ -91,7 +97,7 @@ SoC file extract: Board file extract: ------------------- - pcie-controller@0,01003000 { + pcie-controller@01003000 { ... phys = <&padctl 0>; @@ -102,7 +108,7 @@ Board file extract: ... - padctl: padctl@0,7009f000 { + padctl: padctl@7009f000 { pinctrl-0 = <&padctl_default>; pinctrl-names = "default"; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt index a90c812ad642..a54c39ebbf8b 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt @@ -122,7 +122,7 @@ to specify in a pin configuration subnode: 2: 1.5uA (PMIC_GPIO_PULL_UP_1P5) 3: 31.5uA (PMIC_GPIO_PULL_UP_31P5) 4: 1.5uA + 30uA boost (PMIC_GPIO_PULL_UP_1P5_30) - If this property is ommited 30uA strength will be used if + If this property is omitted 30uA strength will be used if pull up is selected - bias-high-impedance: diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt index ffadb7a371f6..74e6ec0339d6 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt @@ -72,8 +72,8 @@ Pin Configuration Node Properties: The pin configuration parameters use the generic pinconf bindings defined in pinctrl-bindings.txt in this directory. The supported parameters are -bias-disable, bias-pull-up, bias-pull-down and power-source. For pins that -have a configurable I/O voltage, the power-source value should be the +bias-disable, bias-pull-up, bias-pull-down, drive strength and power-source. For +pins that have a configurable I/O voltage, the power-source value should be the nominal I/O voltage in millivolts. diff --git a/Documentation/devicetree/bindings/power/qcom,coincell-charger.txt b/Documentation/devicetree/bindings/power/qcom,coincell-charger.txt index 0e6d8754e7ec..747899223262 100644 --- a/Documentation/devicetree/bindings/power/qcom,coincell-charger.txt +++ b/Documentation/devicetree/bindings/power/qcom,coincell-charger.txt @@ -29,7 +29,7 @@ IC (PMIC) - qcom,charger-disable: Usage: optional Value type: <boolean> - Definition: definining this property disables charging + Definition: defining this property disables charging This charger is a sub-node of one of the 8941 PMIC blocks, and is specified as a child node in DTS of that node. See ../mfd/qcom,spmi-pmic.txt and diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt new file mode 100644 index 000000000000..b74e4d4785ab --- /dev/null +++ b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt @@ -0,0 +1,48 @@ +DT bindings for the Renesas R-Car System Controller + +== System Controller Node == + +The R-Car System Controller provides power management for the CPU cores and +various coprocessors. + +Required properties: + - compatible: Must contain exactly one of the following: + - "renesas,r8a7779-sysc" (R-Car H1) + - "renesas,r8a7790-sysc" (R-Car H2) + - "renesas,r8a7791-sysc" (R-Car M2-W) + - "renesas,r8a7792-sysc" (R-Car V2H) + - "renesas,r8a7793-sysc" (R-Car M2-N) + - "renesas,r8a7794-sysc" (R-Car E2) + - "renesas,r8a7795-sysc" (R-Car H3) + - reg: Address start and address range for the device. + - #power-domain-cells: Must be 1. + + +Example: + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a7791-sysc"; + reg = <0 0xe6180000 0 0x0200>; + #power-domain-cells = <1>; + }; + + +== PM Domain Consumers == + +Devices residing in a power area must refer to that power area, as documented +by the generic PM domain bindings in +Documentation/devicetree/bindings/power/power_domain.txt. + +Required properties: + - power-domains: A phandle and symbolic PM domain specifier, as defined in + <dt-bindings/power/r8a77*-sysc.h>. + + +Example: + + L2_CA15: cache-controller@0 { + compatible = "cache"; + power-domains = <&sysc R8A7791_PD_CA15_SCU>; + cache-unified; + cache-level = <2>; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt b/Documentation/devicetree/bindings/power/reset/gpio-poweroff.txt index d4eab9227ea4..d4eab9227ea4 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt +++ b/Documentation/devicetree/bindings/power/reset/gpio-poweroff.txt diff --git a/Documentation/devicetree/bindings/gpio/gpio-restart.txt b/Documentation/devicetree/bindings/power/reset/gpio-restart.txt index af3701bc15c4..af3701bc15c4 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-restart.txt +++ b/Documentation/devicetree/bindings/power/reset/gpio-restart.txt diff --git a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt index c84fb47265eb..d23dc002a87e 100644 --- a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt +++ b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt @@ -37,8 +37,10 @@ Required properties: - "rockchip,rk3368-pmu-io-voltage-domain" for rk3368 pmu-domains - "rockchip,rk3399-io-voltage-domain" for rk3399 - "rockchip,rk3399-pmu-io-voltage-domain" for rk3399 pmu-domains -- rockchip,grf: phandle to the syscon managing the "general register files" +Deprecated properties: +- rockchip,grf: phandle to the syscon managing the "general register files" + Systems should move the io-domains to a sub-node of the grf simple-mfd. You specify supplies using the standard regulator bindings by including a phandle the relevant regulator. All specified supplies must be able diff --git a/Documentation/devicetree/bindings/regulator/max8973-regulator.txt b/Documentation/devicetree/bindings/regulator/max8973-regulator.txt index f80ea2fe27e6..c2c68fcc1b41 100644 --- a/Documentation/devicetree/bindings/regulator/max8973-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/max8973-regulator.txt @@ -32,6 +32,13 @@ Optional properties: Enhanced transient response (ETR) will affect the configuration of CKADV. +-junction-warn-millicelsius: u32, junction warning temperature threshold + in millicelsius. If die temperature crosses this level then + device generates the warning interrupts. + +Please note that thermal functionality is only supported on MAX77621. The +supported threshold warning temperature for MAX77621 are 120 degC and 140 degC. + Example: max8973@1b { diff --git a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt index 725393c8a7f2..99872819604f 100644 --- a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt +++ b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt @@ -1,5 +1,12 @@ * palmas regulator IP block devicetree bindings +The tps659038 for the AM57x class have OTP spins that +have different part numbers but the same functionality. There +is not a need to add the OTP spins to the palmas driver. The +spin devices should use the tps659038 as it's compatible value. +This is the list of those devices: +tps659037 + Required properties: - compatible : Should be from the list ti,twl6035-pmic @@ -8,6 +15,7 @@ Required properties: ti,tps65913-pmic ti,tps65914-pmic ti,tps65917-pmic + ti,tps659038-pmic and also the generic series names ti,palmas-pmic - interrupt-parent : The parent interrupt controller which is palmas. diff --git a/Documentation/devicetree/bindings/regulator/pv88080.txt b/Documentation/devicetree/bindings/regulator/pv88080.txt new file mode 100644 index 000000000000..38a614210dcb --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/pv88080.txt @@ -0,0 +1,49 @@ +* Powerventure Semiconductor PV88080 Voltage Regulator + +Required properties: +- compatible: "pvs,pv88080". +- reg: I2C slave address, usually 0x49. +- interrupts: the interrupt outputs of the controller +- regulators: A node that houses a sub-node for each regulator within the + device. Each sub-node is identified using the node's name, with valid + values listed below. The content of each sub-node is defined by the + standard binding for regulators; see regulator.txt. + BUCK1, BUCK2, and BUCK3. + +Optional properties: +- Any optional property defined in regulator.txt + +Example + + pmic: pv88080@49 { + compatible = "pvs,pv88080"; + reg = <0x49>; + interrupt-parent = <&gpio>; + interrupts = <24 24>; + + regulators { + BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1393750>; + regulator-min-microamp = < 220000>; + regulator-max-microamp = <7040000>; + }; + + BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1393750>; + regulator-min-microamp = <1496000>; + regulator-max-microamp = <4189000>; + }; + + BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <1400000>; + regulator-max-microvolt = <2193750>; + regulator-min-microamp = <1496000>; + regulator-max-microamp = <4189000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt index d00bfd8624a5..46c6f3ed1a1c 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt @@ -7,6 +7,7 @@ Qualcomm SPMI Regulators "qcom,pm8841-regulators" "qcom,pm8916-regulators" "qcom,pm8941-regulators" + "qcom,pm8994-regulators" - interrupts: Usage: optional @@ -68,6 +69,37 @@ Qualcomm SPMI Regulators Definition: Reference to regulator supplying the input pin, as described in the data sheet. +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s3-supply: +- vdd_s4-supply: +- vdd_s5-supply: +- vdd_s6-supply: +- vdd_s7-supply: +- vdd_s8-supply: +- vdd_s9-supply: +- vdd_s10-supply: +- vdd_s11-supply: +- vdd_s12-supply: +- vdd_l1-supply: +- vdd_l2_l26_l28-supply: +- vdd_l3_l11-supply: +- vdd_l4_l27_l31-supply: +- vdd_l5_l7-supply: +- vdd_l6_l12_l32-supply: +- vdd_l8_l16_l30-supply: +- vdd_l9_l10_l18_l22-supply: +- vdd_l13_l19_l23_l24-supply: +- vdd_l14_l15-supply: +- vdd_l17_l29-supply: +- vdd_l20_l21-supply: +- vdd_l25-supply: +- vdd_lvs_1_2-supply: + Usage: optional (pm8994 only) + Value type: <phandle> + Definition: Reference to regulator supplying the input pin, as + described in the data sheet. + The regulator node houses sub-nodes for each regulator within the device. Each sub-node is identified using the node's name, with valid values listed for each @@ -85,6 +117,11 @@ pm8941: l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2, lvs3, mvs1, mvs2 +pm8994: + s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, l4, l5, + l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, + l21, l22, l23, l24, l25, l26, l27, l28, l29, l30, l31, l32, lvs1, lvs2 + The content of each sub-node is defined by the standard binding for regulators - see regulator.txt - with additional custom properties described below: diff --git a/Documentation/devicetree/bindings/regulator/regulator-max77620.txt b/Documentation/devicetree/bindings/regulator/regulator-max77620.txt index b3c8ca672024..1c4bfe786736 100644 --- a/Documentation/devicetree/bindings/regulator/regulator-max77620.txt +++ b/Documentation/devicetree/bindings/regulator/regulator-max77620.txt @@ -94,6 +94,28 @@ Following are additional properties: This is applicable if suspend state FPS source is selected as FPS0, FPS1 or FPS2. +- maxim,ramp-rate-setting: integer, ramp rate(uV/us) setting to be + configured to the device. + The platform may have different ramp + rate than advertised ramp rate if it has + design variation from Maxim's + recommended. On this case, platform + specific ramp rate is used for ramp time + calculation and this property is used + for device register configurations. + The measured ramp rate of platform is + provided by the regulator-ramp-delay + as described in <devicetree/bindings/ + regulator/regulator.txt>. + Maxim Max77620 supports following ramp + delay: + SD: 13.75mV/us, 27.5mV/us, 55mV/us + LDOs: 5mV/us, 100mV/us + +Note: If the measured ramp delay is same as advertised ramp delay then it is not +required to provide the ramp delay with property "maxim,ramp-rate-setting". The +ramp rate can be provided by the regulator-ramp-delay which will be used for +ramp time calculation for voltage change as well as for device configuration. Example: -------- diff --git a/Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt b/Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt index c58db75f959e..c3f6546ebac7 100644 --- a/Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt @@ -14,8 +14,8 @@ Required Properties: - "setup-address" - contains setup register address of ABB module (ti,abb-v3) - "int-address" - contains address of interrupt register for ABB module (also see Optional properties) -- #address-cell: should be 0 -- #size-cell: should be 0 +- #address-cells: should be 0 +- #size-cells: should be 0 - clocks: should point to the clock node used by ABB module - ti,settling-time: Settling time in uSecs from SoC documentation for ABB module to settle down(target time for SR2_WTCNT_VALUE). @@ -69,7 +69,7 @@ Example #1: Simplest configuration (no efuse data, hard coded ABB table): abb_x: regulator-abb-x { compatible = "ti,abb-v1"; regulator-name = "abb_x"; - #address-cell = <0>; + #address-cells = <0>; #size-cells = <0>; reg = <0x483072f0 0x8>, <0x48306818 0x4>; reg-names = "base-address", "int-address"; @@ -89,7 +89,7 @@ Example #2: Efuse bits contain ABB mode setting (no LDO override capability) abb_y: regulator-abb-y { compatible = "ti,abb-v2"; regulator-name = "abb_y"; - #address-cell = <0>; + #address-cells = <0>; #size-cells = <0>; reg = <0x4a307bd0 0x8>, <0x4a306014 0x4>, <0x4A002268 0x8>; reg-names = "base-address", "int-address", "efuse-address"; @@ -110,7 +110,7 @@ Example #3: Efuse bits contain ABB mode setting and LDO override capability abb_z: regulator-abb-z { compatible = "ti,abb-v2"; regulator-name = "abb_z"; - #address-cell = <0>; + #address-cells = <0>; #size-cells = <0>; reg = <0x4ae07ce4 0x8>, <0x4ae06010 0x4>, <0x4a002194 0x8>, <0x4ae0C314 0x4>; diff --git a/Documentation/devicetree/bindings/regulator/twl-regulator.txt b/Documentation/devicetree/bindings/regulator/twl-regulator.txt index 75b0c1669504..74a91c4f8530 100644 --- a/Documentation/devicetree/bindings/regulator/twl-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/twl-regulator.txt @@ -57,6 +57,12 @@ For twl4030 regulators/LDOs Optional properties: - Any optional property defined in bindings/regulator/regulator.txt +For twl4030 regulators/LDOs: + - regulator-initial-mode: + - 0x08 - Sleep mode, the nominal output voltage is maintained with low power + consumption with low load current capability. + - 0x0e - Active mode, the regulator can deliver its nominal output voltage + with full-load current capability. Example: diff --git a/Documentation/devicetree/bindings/reset/oxnas,reset.txt b/Documentation/devicetree/bindings/reset/oxnas,reset.txt new file mode 100644 index 000000000000..6f06db930030 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/oxnas,reset.txt @@ -0,0 +1,58 @@ +Oxford Semiconductor OXNAS SoC Family RESET Controller +================================================ + +Please also refer to reset.txt in this directory for common reset +controller binding usage. + +Required properties: +- compatible: Should be "oxsemi,ox810se-reset" +- #reset-cells: 1, see below + +Parent node should have the following properties : +- compatible: Should be "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd" + +For OX810SE, the indices are : + - 0 : ARM + - 1 : COPRO + - 2 : Reserved + - 3 : Reserved + - 4 : USBHS + - 5 : USBHSPHY + - 6 : MAC + - 7 : PCI + - 8 : DMA + - 9 : DPE + - 10 : DDR + - 11 : SATA + - 12 : SATA_LINK + - 13 : SATA_PHY + - 14 : Reserved + - 15 : NAND + - 16 : GPIO + - 17 : UART1 + - 18 : UART2 + - 19 : MISC + - 20 : I2S + - 21 : AHB_MON + - 22 : UART3 + - 23 : UART4 + - 24 : SGDMA + - 25 : Reserved + - 26 : Reserved + - 27 : Reserved + - 28 : Reserved + - 29 : Reserved + - 30 : Reserved + - 31 : BUS + +example: + +sys: sys-ctrl@000000 { + compatible = "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd"; + reg = <0x000000 0x100000>; + + reset: reset-controller { + compatible = "oxsemi,ox810se-reset"; + #reset-cells = <1>; + }; +}; diff --git a/Documentation/devicetree/bindings/rng/hisi-rng.txt b/Documentation/devicetree/bindings/rng/hisi-rng.txt new file mode 100644 index 000000000000..d04d55a6c2f5 --- /dev/null +++ b/Documentation/devicetree/bindings/rng/hisi-rng.txt @@ -0,0 +1,12 @@ +Hisilicon Random Number Generator + +Required properties: +- compatible : Should be "hisilicon,hip04-rng" or "hisilicon,hip05-rng" +- reg : Offset and length of the register set of this block + +Example: + +rng@d1010000 { + compatible = "hisilicon,hip05-rng"; + reg = <0xd1010000 0x100>; +}; diff --git a/Documentation/devicetree/bindings/rtc/maxim-ds1302.txt b/Documentation/devicetree/bindings/rtc/maxim-ds1302.txt new file mode 100644 index 000000000000..ba470c56cdec --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/maxim-ds1302.txt @@ -0,0 +1,46 @@ +* Maxim/Dallas Semiconductor DS-1302 RTC + +Simple device which could be used to store date/time between reboots. + +The device uses the standard MicroWire half-duplex transfer timing. +Master output is set on low clock and sensed by the RTC on the rising +edge. Master input is set by the RTC on the trailing edge and is sensed +by the master on low clock. + +Required properties: + +- compatible : Should be "maxim,ds1302" + +Required SPI properties: + +- reg : Should be address of the device chip select within + the controller. + +- spi-max-frequency : DS-1302 has 500 kHz if powered at 2.2V, + and 2MHz if powered at 5V. + +- spi-3wire : The device has a shared signal IN/OUT line. + +- spi-lsb-first : DS-1302 requires least significant bit first + transfers. + +- spi-cs-high: DS-1302 has active high chip select line. This is + required unless inverted in hardware. + +Example: + +spi@901c { + #address-cells = <1>; + #size-cells = <0>; + compatible = "icpdas,lp8841-spi-rtc"; + reg = <0x901c 0x1>; + + rtc@0 { + compatible = "maxim,ds1302"; + reg = <0>; + spi-max-frequency = <500000>; + spi-3wire; + spi-lsb-first; + spi-cs-high; + }; +}; diff --git a/Documentation/devicetree/bindings/rtc/rtc-palmas.txt b/Documentation/devicetree/bindings/rtc/rtc-palmas.txt index adbccc0a51e1..eb1c7fdeb413 100644 --- a/Documentation/devicetree/bindings/rtc/rtc-palmas.txt +++ b/Documentation/devicetree/bindings/rtc/rtc-palmas.txt @@ -15,9 +15,9 @@ Optional properties: battery is chargeable or not. If charging battery then driver can enable the charging. - ti,backup-battery-charge-high-current: Enable high current charging in - backup battery. Device supports the < 100mA and > 100mA charging. - The high current will be > 100mA. Absence of this property will - charge battery to lower current i.e. < 100mA. + backup battery. Device supports the < 100uA and > 100uA charging. + The high current will be > 100uA. Absence of this property will + charge battery to lower current i.e. < 100uA. Example: palmas: tps65913@58 { diff --git a/Documentation/devicetree/bindings/rtc/sa1100-rtc.txt b/Documentation/devicetree/bindings/rtc/sa1100-rtc.txt index 0cda19ad4859..968ac820254b 100644 --- a/Documentation/devicetree/bindings/rtc/sa1100-rtc.txt +++ b/Documentation/devicetree/bindings/rtc/sa1100-rtc.txt @@ -13,5 +13,5 @@ Example: compatible = "mrvl,mmp-rtc"; reg = <0xd4010000 0x1000>; interrupts = <5>, <6>; - interrupt-name = "rtc 1Hz", "rtc alarm"; + interrupt-names = "rtc 1Hz", "rtc alarm"; }; diff --git a/Documentation/devicetree/bindings/serial/arm,mps2-uart.txt b/Documentation/devicetree/bindings/serial/arm,mps2-uart.txt new file mode 100644 index 000000000000..128cc6aed001 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/arm,mps2-uart.txt @@ -0,0 +1,19 @@ +ARM MPS2 UART + +Required properties: +- compatible : Should be "arm,mps2-uart" +- reg : Address and length of the register set +- interrupts : Reference to the UART RX, TX and overrun interrupts + +Required clocking property: +- clocks : The input clock of the UART + + +Examples: + +uart0: serial@40004000 { + compatible = "arm,mps2-uart"; + reg = <0x40004000 0x1000>; + interrupts = <0 1 12>; + clocks = <&sysclk>; +}; diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt index ed94c217c98d..1e82802d8e32 100644 --- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt +++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt @@ -6,7 +6,7 @@ Required properties: - interrupts : Should contain uart interrupt Optional properties: -- fsl,uart-has-rtscts : Indicate the uart has rts and cts +- uart-has-rtscts : Indicate the uart has rts and cts - fsl,irda-mode : Indicate the uart supports irda mode - fsl,dte-mode : Indicate the uart works in DTE mode. The uart works in DCE mode by default. @@ -24,6 +24,6 @@ uart1: serial@73fbc000 { compatible = "fsl,imx51-uart", "fsl,imx21-uart"; reg = <0x73fbc000 0x4000>; interrupts = <31>; - fsl,uart-has-rtscts; + uart-has-rtscts; fsl,dte-mode; }; diff --git a/Documentation/devicetree/bindings/serial/fsl-mxs-auart.txt b/Documentation/devicetree/bindings/serial/fsl-mxs-auart.txt index 7c408c87e613..5c96d41899f1 100644 --- a/Documentation/devicetree/bindings/serial/fsl-mxs-auart.txt +++ b/Documentation/devicetree/bindings/serial/fsl-mxs-auart.txt @@ -1,8 +1,10 @@ * Freescale MXS Application UART (AUART) -Required properties: -- compatible : Should be "fsl,<soc>-auart". The supported SoCs include - imx23 and imx28. +Required properties for all SoCs: +- compatible : Should be one of fallowing variants: + "fsl,imx23-auart" - Freescale i.MX23 + "fsl,imx28-auart" - Freescale i.MX28 + "alphascale,asm9260-auart" - Alphascale ASM9260 - reg : Address and length of the register set for the device - interrupts : Should contain the auart interrupt numbers - dmas: DMA specifier, consisting of a phandle to DMA controller node @@ -10,8 +12,14 @@ Required properties: Refer to dma.txt and fsl-mxs-dma.txt for details. - dma-names: "rx" for RX channel, "tx" for TX channel. +Required properties for "alphascale,asm9260-auart": +- clocks : the clocks feeding the watchdog timer. See clock-bindings.txt +- clock-names : should be set to + "mod" - source for tick counter. + "ahb" - ahb gate. + Optional properties: -- fsl,uart-has-rtscts : Indicate the UART has RTS and CTS lines +- uart-has-rtscts : Indicate the UART has RTS and CTS lines for hardware flow control, it also means you enable the DMA support for this UART. - {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD diff --git a/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt b/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt new file mode 100644 index 000000000000..65b38bf60ae0 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt @@ -0,0 +1,29 @@ +* Microchip Universal Asynchronous Receiver Transmitter (UART) + +Required properties: +- compatible: Should be "microchip,pic32mzda-uart" +- reg: Should contain registers location and length +- interrupts: Should contain interrupt +- clocks: Phandle to the clock. + See: Documentation/devicetree/bindings/clock/clock-bindings.txt +- pinctrl-names: A pinctrl state names "default" must be defined. +- pinctrl-0: Phandle referencing pin configuration of the UART peripheral. + See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt + +Optional properties: +- cts-gpios: CTS pin for UART + +Example: + uart1: serial@1f822000 { + compatible = "microchip,pic32mzda-uart"; + reg = <0x1f822000 0x50>; + interrupts = <112 IRQ_TYPE_LEVEL_HIGH>, + <113 IRQ_TYPE_LEVEL_HIGH>, + <114 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&PBCLK2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1 + &pinctrl_uart1_cts + &pinctrl_uart1_rts>; + cts-gpios = <&gpio1 15 0>; + }; diff --git a/Documentation/devicetree/bindings/tty/serial/mvebu-uart.txt b/Documentation/devicetree/bindings/serial/mvebu-uart.txt index 6087defd9f93..6087defd9f93 100644 --- a/Documentation/devicetree/bindings/tty/serial/mvebu-uart.txt +++ b/Documentation/devicetree/bindings/serial/mvebu-uart.txt diff --git a/Documentation/devicetree/bindings/serial/serial.txt b/Documentation/devicetree/bindings/serial/serial.txt new file mode 100644 index 000000000000..fd970f76a7b8 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/serial.txt @@ -0,0 +1,57 @@ +Generic Serial DT Bindings + +This document lists a set of generic properties for describing UARTs in a +device tree. Whether these properties apply to a particular device depends on +the DT bindings for the actual device. + +Optional properties: + - cts-gpios: Must contain a GPIO specifier, referring to the GPIO pin to be + used as the UART's CTS line. + - dcd-gpios: Must contain a GPIO specifier, referring to the GPIO pin to be + used as the UART's DCD line. + - dsr-gpios: Must contain a GPIO specifier, referring to the GPIO pin to be + used as the UART's DSR line. + - dtr-gpios: Must contain a GPIO specifier, referring to the GPIO pin to be + used as the UART's DTR line. + - rng-gpios: Must contain a GPIO specifier, referring to the GPIO pin to be + used as the UART's RNG line. + - rts-gpios: Must contain a GPIO specifier, referring to the GPIO pin to be + used as the UART's RTS line. + + - uart-has-rtscts: The presence of this property indicates that the + UART has dedicated lines for RTS/CTS hardware flow control, and that + they are available for use (wired and enabled by pinmux configuration). + This depends on both the UART hardware and the board wiring. + Note that this property is mutually-exclusive with "cts-gpios" and + "rts-gpios" above. + + +Examples: + + uart1: serial@48022000 { + compatible = "ti,am3352-uart", "ti,omap3-uart"; + ti,hwmods = "uart2"; + clock-frequency = <48000000>; + reg = <0x48022000 0x2000>; + interrupts = <73>; + dmas = <&edma 28 0>, <&edma 29 0>; + dma-names = "tx", "rx"; + dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; + dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; + dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>; + rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; + cts-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + rts-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + status = "okay"; + }; + + scifa4: serial@e6c80000 { + compatible = "renesas,scifa-sh73a0", "renesas,scifa"; + reg = <0xe6c80000 0x100>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks SH73A0_CLK_SCIFA4>; + clock-names = "fck"; + power-domains = <&pd_a3sp>; + uart-has-rtscts; + status = "okay"; + }; diff --git a/Documentation/devicetree/bindings/serial/sirf-uart.txt b/Documentation/devicetree/bindings/serial/sirf-uart.txt index 67e2a0aeb042..1e48bbbeecc6 100644 --- a/Documentation/devicetree/bindings/serial/sirf-uart.txt +++ b/Documentation/devicetree/bindings/serial/sirf-uart.txt @@ -9,9 +9,9 @@ Required properties: - clocks : Should contain uart clock number Optional properties: -- sirf,uart-has-rtscts: we have hardware flow controller pins in hardware -- rts-gpios: RTS pin for USP-based UART if sirf,uart-has-rtscts is true -- cts-gpios: CTS pin for USP-based UART if sirf,uart-has-rtscts is true +- uart-has-rtscts: we have hardware flow controller pins in hardware +- rts-gpios: RTS pin for USP-based UART if uart-has-rtscts is true +- cts-gpios: CTS pin for USP-based UART if uart-has-rtscts is true Example: @@ -28,7 +28,7 @@ On the board-specific dts, we can put rts-gpios and cts-gpios like usp@b0090000 { compatible = "sirf,prima2-usp-uart"; - sirf,uart-has-rtscts; + uart-has-rtscts; rts-gpios = <&gpio 15 0>; cts-gpios = <&gpio 46 0>; }; diff --git a/Documentation/devicetree/bindings/soc/mediatek/auxadc.txt b/Documentation/devicetree/bindings/soc/mediatek/auxadc.txt new file mode 100644 index 000000000000..bdb782918a72 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/mediatek/auxadc.txt @@ -0,0 +1,21 @@ +MediaTek AUXADC +=============== + +The Auxiliary Analog/Digital Converter (AUXADC) is an ADC found +in some Mediatek SoCs which among other things measures the temperatures +in the SoC. It can be used directly with register accesses, but it is also +used by thermal controller which reads the temperatures from the AUXADC +directly via its own bus interface. See +Documentation/devicetree/bindings/thermal/mediatek-thermal.txt +for the Thermal Controller which holds a phandle to the AUXADC. + +Required properties: +- compatible: Must be "mediatek,mt8173-auxadc" +- reg: Address range of the AUXADC unit + +Example: + +auxadc: auxadc@11001000 { + compatible = "mediatek,mt8173-auxadc"; + reg = <0 0x11001000 0 0x1000>; +}; diff --git a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt index ddeb5b6a53c1..107700d00df4 100644 --- a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt +++ b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt @@ -18,6 +18,7 @@ IP Pairing Required properties in pwrap device node. - compatible: + "mediatek,mt2701-pwrap" for MT2701/7623 SoCs "mediatek,mt8135-pwrap" for MT8135 SoCs "mediatek,mt8173-pwrap" for MT8173 SoCs - interrupts: IRQ for pwrap in SOC diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.txt b/Documentation/devicetree/bindings/soc/rockchip/grf.txt new file mode 100644 index 000000000000..013e71a2cdc7 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/rockchip/grf.txt @@ -0,0 +1,35 @@ +* Rockchip General Register Files (GRF) + +The general register file will be used to do static set by software, which +is composed of many registers for system control. + +From RK3368 SoCs, the GRF is divided into two sections, +- GRF, used for general non-secure system, +- PMUGRF, used for always on system + +Required Properties: + +- compatible: GRF should be one of the followings + - "rockchip,rk3066-grf", "syscon": for rk3066 + - "rockchip,rk3188-grf", "syscon": for rk3188 + - "rockchip,rk3228-grf", "syscon": for rk3228 + - "rockchip,rk3288-grf", "syscon": for rk3288 + - "rockchip,rk3368-grf", "syscon": for rk3368 + - "rockchip,rk3399-grf", "syscon": for rk3399 +- compatible: PMUGRF should be one of the followings + - "rockchip,rk3368-pmugrf", "syscon": for rk3368 + - "rockchip,rk3399-pmugrf", "syscon": for rk3399 +- reg: physical base address of the controller and length of memory mapped + region. + +Example: GRF and PMUGRF of RK3399 SoCs + + pmugrf: syscon@ff320000 { + compatible = "rockchip,rk3399-pmugrf", "syscon"; + reg = <0x0 0xff320000 0x0 0x1000>; + }; + + grf: syscon@ff770000 { + compatible = "rockchip,rk3399-grf", "syscon"; + reg = <0x0 0xff770000 0x0 0x10000>; + }; diff --git a/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt b/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt index 13dc6a3fdb4a..f909ce06afc4 100644 --- a/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt +++ b/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt @@ -7,6 +7,7 @@ Required properties for power domain controller: - compatible: Should be one of the following. "rockchip,rk3288-power-controller" - for RK3288 SoCs. "rockchip,rk3368-power-controller" - for RK3368 SoCs. + "rockchip,rk3399-power-controller" - for RK3399 SoCs. - #power-domain-cells: Number of cells in a power-domain specifier. Should be 1 for multiple PM domains. - #address-cells: Should be 1. @@ -16,8 +17,18 @@ Required properties for power domain sub nodes: - reg: index of the power domain, should use macros in: "include/dt-bindings/power/rk3288-power.h" - for RK3288 type power domain. "include/dt-bindings/power/rk3368-power.h" - for RK3368 type power domain. + "include/dt-bindings/power/rk3399-power.h" - for RK3399 type power domain. - clocks (optional): phandles to clocks which need to be enabled while power domain switches state. +- pm_qos (optional): phandles to qos blocks which need to be saved and restored + while power domain switches state. + +Qos Example: + + qos_gpu: qos_gpu@ffaf0000 { + compatible ="syscon"; + reg = <0x0 0xffaf0000 0x0 0x20>; + }; Example: @@ -30,6 +41,7 @@ Example: pd_gpu { reg = <RK3288_PD_GPU>; clocks = <&cru ACLK_GPU>; + pm_qos = <&qos_gpu>; }; }; @@ -45,12 +57,41 @@ Example: }; }; +Example 2: + power: power-controller { + compatible = "rockchip,rk3399-power-controller"; + #power-domain-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + pd_vio { + #address-cells = <1>; + #size-cells = <0>; + reg = <RK3399_PD_VIO>; + + pd_vo { + #address-cells = <1>; + #size-cells = <0>; + reg = <RK3399_PD_VO>; + + pd_vopb { + reg = <RK3399_PD_VOPB>; + }; + + pd_vopl { + reg = <RK3399_PD_VOPL>; + }; + }; + }; + }; + Node of a device using power domains must have a power-domains property, containing a phandle to the power device node and an index specifying which power domain to use. The index should use macros in: "include/dt-bindings/power/rk3288-power.h" - for rk3288 type power domain. "include/dt-bindings/power/rk3368-power.h" - for rk3368 type power domain. + "include/dt-bindings/power/rk3399-power.h" - for rk3399 type power domain. Example of the node using power domain: @@ -65,3 +106,9 @@ Example of the node using power domain: power-domains = <&power RK3368_PD_GPU_1>; /* ... */ }; + + node { + /* ... */ + power-domains = <&power RK3399_PD_VOPB>; + /* ... */ + }; diff --git a/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt b/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt index d1ce21a4904d..64c66a5644e7 100644 --- a/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt +++ b/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt @@ -42,7 +42,7 @@ Required properties: - queue-pools : child node classifying the queue ranges into pools. Queue ranges are grouped into 3 type of pools: - qpend : pool of qpend(interruptible) queues - - general-purpose : pool of general queues, primarly used + - general-purpose : pool of general queues, primarily used as free descriptor queues or the transmit DMA queues. - accumulator : pool of queues on PDSP accumulator channel @@ -50,7 +50,7 @@ Required properties: -- qrange : number of queues to use per queue range, specified as <"base queue #" "# of queues">. -- interrupts : Optional property to specify the interrupt mapping - for interruptible queues. The driver additionaly sets + for interruptible queues. The driver additionally sets the interrupt affinity hint based on the cpu mask. -- qalloc-by-id : Optional property to specify that the queues in this range can only be allocated by queue id. @@ -80,7 +80,7 @@ Required properties: latency : time to delay the interrupt, specified in microseconds. -- multi-queue : Optional property to specify that the channel has to - monitor upto 32 queues starting at the base queue #. + monitor up to 32 queues starting at the base queue #. - descriptor-regions : child node describing the memory regions for keystone navigator packet DMA descriptors. The memory for descriptors will be allocated by the driver. diff --git a/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt b/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt new file mode 100644 index 000000000000..55b53e1fd72c --- /dev/null +++ b/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt @@ -0,0 +1,51 @@ +Texas Instruments DaVinci McBSP module +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +This binding describes the "Multi-channel Buffered Serial Port" (McBSP) +audio interface found in some TI DaVinci processors like the OMAP-L138 or AM180x. + + +Required properties: +~~~~~~~~~~~~~~~~~~~~ +- compatible : + "ti,da850-mcbsp" : for DA850, AM180x and OPAM-L138 platforms + +- reg : physical base address and length of the controller memory mapped + region(s). +- reg-names : Should contain: + * "mpu" for the main registers (required). + * "dat" for the data FIFO (optional). + +- dmas: three element list of DMA controller phandles, DMA request line and + TC channel ordered triplets. +- dma-names: identifier string for each DMA request line in the dmas property. + These strings correspond 1:1 with the ordered pairs in dmas. The dma + identifiers must be "rx" and "tx". + +Optional properties: +~~~~~~~~~~~~~~~~~~~~ +- interrupts : Interrupt numbers for McBSP +- interrupt-names : Known interrupt names are "rx" and "tx" + +- pinctrl-0: Should specify pin control group used for this controller. +- pinctrl-names: Should contain only one value - "default", for more details + please refer to pinctrl-bindings.txt + +Example (AM1808): +~~~~~~~~~~~~~~~~~ + +mcbsp0: mcbsp@1d10000 { + compatible = "ti,da850-mcbsp"; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp0_pins>; + + reg = <0x00110000 0x1000>, + <0x00310000 0x1000>; + reg-names = "mpu", "dat"; + interrupts = <97 98>; + interrupts-names = "rx", "tx"; + dmas = <&edma0 3 1 + &edma0 2 1>; + dma-names = "tx", "rx"; + status = "okay"; +}; diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt b/Documentation/devicetree/bindings/sound/fsl-sai.txt index 044e5d76e2dd..740b467adf7d 100644 --- a/Documentation/devicetree/bindings/sound/fsl-sai.txt +++ b/Documentation/devicetree/bindings/sound/fsl-sai.txt @@ -7,8 +7,8 @@ codec/DSP interfaces. Required properties: - - compatible : Compatible list, contains "fsl,vf610-sai" or - "fsl,imx6sx-sai". + - compatible : Compatible list, contains "fsl,vf610-sai", + "fsl,imx6sx-sai" or "fsl,imx6ul-sai" - reg : Offset and length of the register set for the device. @@ -48,6 +48,11 @@ Required properties: receive data by following their own bit clocks and frame sync clocks separately. +Optional properties (for mx6ul): + + - fsl,sai-mclk-direction-output: This is a boolean property. If present, + indicates that SAI will output the SAI MCLK clock. + Note: - If both fsl,sai-asynchronous and fsl,sai-synchronous-rx are absent, the default synchronous mode (sync Rx with Tx) will be used, which means both diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt index 275c6ea356f6..44d27456e8a4 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt @@ -15,7 +15,7 @@ Required properties: Example: -hda@0,70030000 { +hda@70030000 { compatible = "nvidia,tegra124-hda", "nvidia,tegra30-hda"; reg = <0x0 0x70030000 0x0 0x10000>; interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/sound/pcm5102a.txt b/Documentation/devicetree/bindings/sound/pcm5102a.txt new file mode 100644 index 000000000000..c63ab0b6ee19 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/pcm5102a.txt @@ -0,0 +1,13 @@ +PCM5102a audio CODECs + +These devices does not use I2C or SPI. + +Required properties: + + - compatible : set as "ti,pcm5102a" + +Examples: + + pcm5102a: pcm5102a { + compatible = "ti,pcm5102a"; + }; diff --git a/Documentation/devicetree/bindings/spi/microchip,spi-pic32.txt b/Documentation/devicetree/bindings/spi/microchip,spi-pic32.txt new file mode 100644 index 000000000000..79de379f4dc0 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/microchip,spi-pic32.txt @@ -0,0 +1,34 @@ +Microchip PIC32 SPI Master controller + +Required properties: +- compatible: Should be "microchip,pic32mzda-spi". +- reg: Address and length of register space for the device. +- interrupts: Should contain all three spi interrupts in sequence + of <fault-irq>, <receive-irq>, <transmit-irq>. +- interrupt-names: Should be "fault", "rx", "tx" in order. +- clocks: Phandle of the clock generating SPI clock on the bus. +- clock-names: Should be "mck0". +- cs-gpios: Specifies the gpio pins to be used for chipselects. + See: Documentation/devicetree/bindings/spi/spi-bus.txt + +Optional properties: +- dmas: Two or more DMA channel specifiers following the convention outlined + in Documentation/devicetree/bindings/dma/dma.txt +- dma-names: Names for the dma channels. There must be at least one channel + named "spi-tx" for transmit and named "spi-rx" for receive. + +Example: + +spi1: spi@1f821000 { + compatible = "microchip,pic32mzda-spi"; + reg = <0x1f821000 0x200>; + interrupts = <109 IRQ_TYPE_LEVEL_HIGH>, + <110 IRQ_TYPE_LEVEL_HIGH>, + <111 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "fault", "rx", "tx"; + clocks = <&PBCLK2>; + clock-names = "mck0"; + cs-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; + dmas = <&dma 134>, <&dma 135>; + dma-names = "spi-rx", "spi-tx"; +}; diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt index fa77f874e321..ff5893d275a2 100644 --- a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt @@ -1,7 +1,10 @@ ARM Freescale DSPI controller Required properties: -- compatible : "fsl,vf610-dspi", "fsl,ls1021a-v1.0-dspi", "fsl,ls2085a-dspi" +- compatible : "fsl,vf610-dspi", "fsl,ls1021a-v1.0-dspi", + "fsl,ls2085a-dspi" + or + "fsl,ls2080a-dspi" followed by "fsl,ls2085a-dspi" - reg : Offset and length of the register set for the device - interrupts : Should contain SPI controller interrupt - clocks: from common clock binding: handle to dspi clock. @@ -13,8 +16,7 @@ Required properties: Optional property: - big-endian: If present the dspi device's registers are implemented - in big endian mode, otherwise in native mode(same with CPU), for more - detail please see: Documentation/devicetree/bindings/regmap/regmap.txt. + in big endian mode. Optional SPI slave node properties: - fsl,spi-cs-sck-delay: a delay in nanoseconds between activating chip diff --git a/Documentation/devicetree/bindings/spi/sqi-pic32.txt b/Documentation/devicetree/bindings/spi/sqi-pic32.txt new file mode 100644 index 000000000000..c82d021bce50 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/sqi-pic32.txt @@ -0,0 +1,18 @@ +Microchip PIC32 Quad SPI controller +----------------------------------- +Required properties: +- compatible: Should be "microchip,pic32mzda-sqi". +- reg: Address and length of SQI controller register space. +- interrupts: Should contain SQI interrupt. +- clocks: Should contain phandle of two clocks in sequence, one that drives + clock on SPI bus and other that drives SQI controller. +- clock-names: Should be "spi_ck" and "reg_ck" in order. + +Example: + sqi1: spi@1f8e2000 { + compatible = "microchip,pic32mzda-sqi"; + reg = <0x1f8e2000 0x200>; + clocks = <&rootclk REF2CLK>, <&rootclk PB5CLK>; + clock-names = "spi_ck", "reg_ck"; + interrupts = <169 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/spi/ti_qspi.txt b/Documentation/devicetree/bindings/spi/ti_qspi.txt index cc8304aa64ac..50b14f6b53a3 100644 --- a/Documentation/devicetree/bindings/spi/ti_qspi.txt +++ b/Documentation/devicetree/bindings/spi/ti_qspi.txt @@ -19,6 +19,13 @@ Optional properties: - syscon-chipselects: Handle to system control region contains QSPI chipselect register and offset of that register. +NOTE: TI QSPI controller requires different pinmux and IODelay +paramaters for Mode-0 and Mode-3 operations, which needs to be set up by +the bootloader (U-Boot). Default configuration only supports Mode-0 +operation. Hence, "spi-cpol" and "spi-cpha" DT properties cannot be +specified in the slave nodes of TI QSPI controller without appropriate +modification to bootloader. + Example: For am4372: diff --git a/Documentation/devicetree/bindings/sram/sram.txt b/Documentation/devicetree/bindings/sram/sram.txt index 227e3a341af1..add48f09015e 100644 --- a/Documentation/devicetree/bindings/sram/sram.txt +++ b/Documentation/devicetree/bindings/sram/sram.txt @@ -51,7 +51,7 @@ sram: sram@5c000000 { compatible = "mmio-sram"; reg = <0x5c000000 0x40000>; /* 256 KiB SRAM at address 0x5c000000 */ - #adress-cells = <1>; + #address-cells = <1>; #size-cells = <1>; ranges = <0 0x5c000000 0x40000>; diff --git a/Documentation/devicetree/bindings/thermal/tegra-soctherm.txt b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt index 6b68cd150405..edebfa0a985e 100644 --- a/Documentation/devicetree/bindings/thermal/tegra-soctherm.txt +++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt @@ -26,10 +26,14 @@ Required properties : of this property. See <dt-bindings/thermal/tegra124-soctherm.h> for a list of valid values when referring to thermal sensors. +Note: +- the "critical" type trip points will be set to SOC_THERM hardware as the +shut down temperature. Once the temperature of this thermal zone is higher +than it, the system will be shutdown or reset by hardware. Example : - soctherm@0,700e2000 { + soctherm@700e2000 { compatible = "nvidia,tegra124-soctherm"; reg = <0x0 0x700e2000 0x0 0x1000>; interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; @@ -51,5 +55,13 @@ Example: referring to thermal sensors : thermal-sensors = <&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>; + + trips { + cpu_shutdown_trip: shutdown-trip { + temperature = <102500>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; }; diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt index e5ee3f159893..a8e52c8ccfcc 100644 --- a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt @@ -11,7 +11,6 @@ Required properties: - "renesas,thermal-r8a7791" (R-Car M2-W) - "renesas,thermal-r8a7792" (R-Car V2H) - "renesas,thermal-r8a7793" (R-Car M2-N) - - "renesas,thermal-r8a7794" (R-Car E2) - reg : Address range of the thermal registers. The 1st reg will be recognized as common register if it has "interrupts". diff --git a/Documentation/devicetree/bindings/thermal/tango-thermal.txt b/Documentation/devicetree/bindings/thermal/tango-thermal.txt new file mode 100644 index 000000000000..212198d4b937 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/tango-thermal.txt @@ -0,0 +1,17 @@ +* Tango Thermal + +The SMP8758 SoC includes 3 instances of this temperature sensor +(in the CPU, video decoder, and PCIe controller). + +Required properties: +- #thermal-sensor-cells: Should be 0 (see thermal.txt) +- compatible: "sigma,smp8758-thermal" +- reg: Address range of the thermal registers + +Example: + + cpu_temp: thermal@920100 { + #thermal-sensor-cells = <0>; + compatible = "sigma,smp8758-thermal"; + reg = <0x920100 12>; + }; diff --git a/Documentation/devicetree/bindings/thermal/thermal-generic-adc.txt b/Documentation/devicetree/bindings/thermal/thermal-generic-adc.txt new file mode 100644 index 000000000000..d72355502b78 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/thermal-generic-adc.txt @@ -0,0 +1,89 @@ +General Purpose Analog To Digital Converter (ADC) based thermal sensor. + +On some of platforms, thermal sensor like thermistors are connected to +one of ADC channel and sensor resistance is read via voltage across the +sensor resistor. The voltage read across the sensor is mapped to +temperature using voltage-temperature lookup table. + +Required properties: +=================== +- compatible: Must be "generic-adc-thermal". +- temperature-lookup-table: Two dimensional array of Integer; lookup table + to map the relation between ADC value and + temperature. When ADC is read, the value is + looked up on the table to get the equivalent + temperature. + The first value of the each row of array is the + temperature in milliCelsius and second value of + the each row of array is the ADC read value. +- #thermal-sensor-cells: Should be 1. See ./thermal.txt for a description + of this property. + +Example : +#include <dt-bindings/thermal/thermal.h> + +i2c@7000c400 { + ads1015: ads1015@4a { + reg = <0x4a>; + compatible = "ads1015"; + sampling-frequency = <3300>; + #io-channel-cells = <1>; + }; +}; + +tboard_thermistor: thermal-sensor { + compatible = "generic-adc-thermal"; + #thermal-sensor-cells = <0>; + io-channels = <&ads1015 1>; + io-channel-names = "sensor-channel"; + temperature-lookup-table = < (-40000) 2578 + (-39000) 2577 + (-38000) 2576 + (-37000) 2575 + (-36000) 2574 + (-35000) 2573 + (-34000) 2572 + (-33000) 2571 + (-32000) 2569 + (-31000) 2568 + (-30000) 2567 + :::::::::: + 118000 254 + 119000 247 + 120000 240 + 121000 233 + 122000 226 + 123000 220 + 124000 214 + 125000 208>; +}; + +dummy_cool_dev: dummy-cool-dev { + compatible = "dummy-cooling-dev"; + #cooling-cells = <2>; /* min followed by max */ +}; + +thermal-zones { + Tboard { + polling-delay = <15000>; /* milliseconds */ + polling-delay-passive = <0>; /* milliseconds */ + thermal-sensors = <&tboard_thermistor>; + + trips { + therm_est_trip: therm_est_trip { + temperature = <40000>; + type = "active"; + hysteresis = <1000>; + }; + }; + + cooling-maps { + map0 { + trip = <&therm_est_trip>; + cooling-device = <&dummy_cool_dev THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + contribution = <100>; + }; + + }; + }; +}; diff --git a/Documentation/devicetree/bindings/timer/arm,mps2-timer.txt b/Documentation/devicetree/bindings/timer/arm,mps2-timer.txt new file mode 100644 index 000000000000..48f84d74edde --- /dev/null +++ b/Documentation/devicetree/bindings/timer/arm,mps2-timer.txt @@ -0,0 +1,28 @@ +ARM MPS2 timer + +The MPS2 platform has simple general-purpose 32 bits timers. + +Required properties: +- compatible : Should be "arm,mps2-timer" +- reg : Address and length of the register set +- interrupts : Reference to the timer interrupt + +Required clocking property, have to be one of: +- clocks : The input clock of the timer +- clock-frequency : The rate in HZ in input of the ARM MPS2 timer + +Examples: + +timer1: mps2-timer@40000000 { + compatible = "arm,mps2-timer"; + reg = <0x40000000 0x1000>; + interrupts = <8>; + clocks = <&sysclk>; +}; + +timer2: mps2-timer@40001000 { + compatible = "arm,mps2-timer"; + reg = <0x40001000 0x1000>; + interrupts = <9>; + clock-frequency = <25000000>; +}; diff --git a/Documentation/devicetree/bindings/timer/ezchip,nps400-timer.txt b/Documentation/devicetree/bindings/timer/ezchip,nps400-timer.txt new file mode 100644 index 000000000000..c8c03d700382 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/ezchip,nps400-timer.txt @@ -0,0 +1,15 @@ +NPS Network Processor + +Required properties: + +- compatible : should be "ezchip,nps400-timer" + +Clocks required for compatible = "ezchip,nps400-timer": +- clocks : Must contain a single entry describing the clock input + +Example: + +timer { + compatible = "ezchip,nps400-timer"; + clocks = <&sysclk>; +}; diff --git a/Documentation/devicetree/bindings/timer/snps,arc-timer.txt b/Documentation/devicetree/bindings/timer/snps,arc-timer.txt new file mode 100644 index 000000000000..4ef024630d61 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/snps,arc-timer.txt @@ -0,0 +1,31 @@ +Synopsys ARC Local Timer with Interrupt Capabilities +- Found on all ARC CPUs (ARC700/ARCHS) +- Can be optionally programmed to interrupt on Limit +- Two idential copies TIMER0 and TIMER1 exist in ARC cores and historically + TIMER0 used as clockevent provider (true for all ARC cores) + TIMER1 used for clocksource (mandatory for ARC700, optional for ARC HS) + +Required properties: + +- compatible : should be "snps,arc-timer" +- interrupts : single Interrupt going into parent intc + (16 for ARCHS cores, 3 for ARC700 cores) +- clocks : phandle to the source clock + +Optional properties: + +- interrupt-parent : phandle to parent intc + +Example: + + timer0 { + compatible = "snps,arc-timer"; + interrupts = <3>; + interrupt-parent = <&core_intc>; + clocks = <&core_clk>; + }; + + timer1 { + compatible = "snps,arc-timer"; + clocks = <&core_clk>; + }; diff --git a/Documentation/devicetree/bindings/timer/snps,archs-gfrc.txt b/Documentation/devicetree/bindings/timer/snps,archs-gfrc.txt new file mode 100644 index 000000000000..b6cd1b3922de --- /dev/null +++ b/Documentation/devicetree/bindings/timer/snps,archs-gfrc.txt @@ -0,0 +1,14 @@ +Synopsys ARC Free Running 64-bit Global Timer for ARC HS CPUs +- clocksource provider for SMP SoC + +Required properties: + +- compatible : should be "snps,archs-gfrc" +- clocks : phandle to the source clock + +Example: + + gfrc { + compatible = "snps,archs-gfrc"; + clocks = <&core_clk>; + }; diff --git a/Documentation/devicetree/bindings/timer/snps,archs-rtc.txt b/Documentation/devicetree/bindings/timer/snps,archs-rtc.txt new file mode 100644 index 000000000000..47bd7a702f3f --- /dev/null +++ b/Documentation/devicetree/bindings/timer/snps,archs-rtc.txt @@ -0,0 +1,14 @@ +Synopsys ARC Free Running 64-bit Local Timer for ARC HS CPUs +- clocksource provider for UP SoC + +Required properties: + +- compatible : should be "snps,archs-rtc" +- clocks : phandle to the source clock + +Example: + + rtc { + compatible = "snps,arc-rtc"; + clocks = <&core_clk>; + }; diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt index fb2ad0acedbd..7d7ce089b003 100644 --- a/Documentation/devicetree/bindings/usb/dwc3.txt +++ b/Documentation/devicetree/bindings/usb/dwc3.txt @@ -14,7 +14,6 @@ Optional properties: the second element is expected to be a handle to the USB3/SS PHY - phys: from the *Generic PHY* bindings - phy-names: from the *Generic PHY* bindings - - tx-fifo-resize: determines if the FIFO *has* to be reallocated. - snps,usb3_lpm_capable: determines if platform is USB3 LPM capable - snps,disable_scramble_quirk: true when SW should disable data scrambling. Only really useful for FPGA builds. @@ -38,6 +37,8 @@ Optional properties: - snps,dis_u2_susphy_quirk: when set core will disable USB2 suspend phy. - snps,dis_enblslpm_quirk: when set clears the enblslpm in GUSB2PHYCFG, disabling the suspend signal to the PHY. + - snps,dis_rxdet_inp3_quirk: when set core will disable receiver detection + in PHY P3 power state. - snps,is-utmi-l1-suspend: true when DWC3 asserts output signal utmi_l1_suspend_n, false when asserts utmi_sleep_n - snps,hird-threshold: HIRD threshold @@ -47,6 +48,8 @@ Optional properties: register for post-silicon frame length adjustment when the fladj_30mhz_sdbnd signal is invalid or incorrect. + - <DEPRECATED> tx-fifo-resize: determines if the FIFO *has* to be reallocated. + This is usually a subnode to DWC3 glue to which it is connected. dwc3@4a030000 { @@ -54,5 +57,4 @@ dwc3@4a030000 { reg = <0x4a030000 0xcfff>; interrupts = <0 92 4> usb-phy = <&usb2_phy>, <&usb3,phy>; - tx-fifo-resize; }; diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt new file mode 100644 index 000000000000..d28295a3e55f --- /dev/null +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt @@ -0,0 +1,120 @@ +NVIDIA Tegra xHCI controller +============================ + +The Tegra xHCI controller supports both USB2 and USB3 interfaces exposed by +the Tegra XUSB pad controller. + +Required properties: +-------------------- +- compatible: Must be: + - Tegra124: "nvidia,tegra124-xusb" + - Tegra132: "nvidia,tegra132-xusb", "nvidia,tegra124-xusb" + - Tegra210: "nvidia,tegra210-xusb" +- reg: Must contain the base and length of the xHCI host registers, XUSB FPCI + registers and XUSB IPFS registers. +- reg-names: Must contain the following entries: + - "hcd" + - "fpci" + - "ipfs" +- interrupts: Must contain the xHCI host interrupt and the mailbox interrupt. +- clocks: Must contain an entry for each entry in clock-names. + See ../clock/clock-bindings.txt for details. +- clock-names: Must include the following entries: + - xusb_host + - xusb_host_src + - xusb_falcon_src + - xusb_ss + - xusb_ss_src + - xusb_ss_div2 + - xusb_hs_src + - xusb_fs_src + - pll_u_480m + - clk_m + - pll_e +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must include the following entries: + - xusb_host + - xusb_ss + - xusb_src + Note that xusb_src is the shared reset for xusb_{ss,hs,fs,falcon,host}_src. +- nvidia,xusb-padctl: phandle to the XUSB pad controller that is used to + configure the USB pads used by the XHCI controller + +For Tegra124 and Tegra132: +- avddio-pex-supply: PCIe/USB3 analog logic power supply. Must supply 1.05 V. +- dvddio-pex-supply: PCIe/USB3 digital logic power supply. Must supply 1.05 V. +- avdd-usb-supply: USB controller power supply. Must supply 3.3 V. +- avdd-pll-utmip-supply: UTMI PLL power supply. Must supply 1.8 V. +- avdd-pll-erefe-supply: PLLE reference PLL power supply. Must supply 1.05 V. +- avdd-usb-ss-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V. +- hvdd-usb-ss-supply: High-voltage PCIe/USB3 power supply. Must supply 3.3 V. +- hvdd-usb-ss-pll-e-supply: High-voltage PLLE power supply. Must supply 3.3 V. + +For Tegra210: +- dvddio-pex-supply: PCIe/USB3 analog logic power supply. Must supply 1.05 V. +- hvddio-pex-supply: High-voltage PCIe/USB3 power supply. Must supply 1.8 V. +- avdd-usb-supply: USB controller power supply. Must supply 3.3 V. +- avdd-pll-utmip-supply: UTMI PLL power supply. Must supply 1.8 V. +- avdd-pll-uerefe-supply: PLLE reference PLL power supply. Must supply 1.05 V. +- dvdd-pex-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V. +- hvdd-pex-pll-e-supply: High-voltage PLLE power supply. Must supply 1.8 V. + +Optional properties: +-------------------- +- phys: Must contain an entry for each entry in phy-names. + See ../phy/phy-bindings.txt for details. +- phy-names: Should include an entry for each PHY used by the controller. The + following PHYs are available: + - Tegra124: usb2-0, usb2-1, usb2-2, hsic-0, hsic-1, usb3-0, usb3-1 + - Tegra132: usb2-0, usb2-1, usb2-2, hsic-0, hsic-1, usb3-0, usb3-1 + - Tegra210: usb2-0, usb2-1, usb2-2, usb2-3, hsic-0, usb3-0, usb3-1, usb3-2, + usb3-3 + +Example: +-------- + + usb@0,70090000 { + compatible = "nvidia,tegra124-xusb"; + reg = <0x0 0x70090000 0x0 0x8000>, + <0x0 0x70098000 0x0 0x1000>, + <0x0 0x70099000 0x0 0x1000>; + reg-names = "hcd", "fpci", "ipfs"; + + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&tegra_car TEGRA124_CLK_XUSB_HOST>, + <&tegra_car TEGRA124_CLK_XUSB_HOST_SRC>, + <&tegra_car TEGRA124_CLK_XUSB_FALCON_SRC>, + <&tegra_car TEGRA124_CLK_XUSB_SS>, + <&tegra_car TEGRA124_CLK_XUSB_SS_DIV2>, + <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>, + <&tegra_car TEGRA124_CLK_XUSB_HS_SRC>, + <&tegra_car TEGRA124_CLK_XUSB_FS_SRC>, + <&tegra_car TEGRA124_CLK_PLL_U_480M>, + <&tegra_car TEGRA124_CLK_CLK_M>, + <&tegra_car TEGRA124_CLK_PLL_E>; + clock-names = "xusb_host", "xusb_host_src", "xusb_falcon_src", + "xusb_ss", "xusb_ss_div2", "xusb_ss_src", + "xusb_hs_src", "xusb_fs_src", "pll_u_480m", + "clk_m", "pll_e"; + resets = <&tegra_car 89>, <&tegra_car 156>, <&tegra_car 143>; + reset-names = "xusb_host", "xusb_ss", "xusb_src"; + + nvidia,xusb-padctl = <&padctl>; + + phys = <&{/padctl@0,7009f000/pads/usb2/usb2-1}>, /* mini-PCIe USB */ + <&{/padctl@0,7009f000/pads/usb2/usb2-2}>, /* USB A */ + <&{/padctl@0,7009f000/pads/pcie/pcie-0}>; /* USB A */ + phy-names = "utmi-1", "utmi-2", "usb3-0"; + + avddio-pex-supply = <&vdd_1v05_run>; + dvddio-pex-supply = <&vdd_1v05_run>; + avdd-usb-supply = <&vdd_3v3_lp0>; + avdd-pll-utmip-supply = <&vddio_1v8>; + avdd-pll-erefe-supply = <&avdd_1v05_run>; + avdd-usb-ss-pll-supply = <&vdd_1v05_run>; + hvdd-usb-ss-supply = <&vdd_3v3_lp0>; + hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>; + }; diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt index ca164e71dd50..39acb084bce9 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt @@ -59,7 +59,6 @@ Example device nodes: interrupts = <0 205 0x4>; phys = <&hs_phy>, <&ss_phy>; phy-names = "usb2-phy", "usb3-phy"; - tx-fifo-resize; dr_mode = "host"; }; }; diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt index 6a17aa85c4d5..966885c636d0 100644 --- a/Documentation/devicetree/bindings/usb/usb-xhci.txt +++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt @@ -4,6 +4,7 @@ Required properties: - compatible: should be one or more of - "generic-xhci" for generic XHCI device + - "marvell,armada3700-xhci" for Armada 37xx SoCs - "marvell,armada-375-xhci" for Armada 375 SoCs - "marvell,armada-380-xhci" for Armada 38x SoCs - "renesas,xhci-r8a7790" for r8a7790 SoC diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 86740d4a270d..a7440bcd67ff 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -16,19 +16,23 @@ al Annapurna Labs allwinner Allwinner Technology Co., Ltd. alphascale AlphaScale Integrated Circuits Systems, Inc. altr Altera Corp. +amazon Amazon.com, Inc. amcc Applied Micro Circuits Corporation (APM, formally AMCC) amd Advanced Micro Devices (AMD), Inc. amlogic Amlogic, Inc. ampire Ampire Co., Ltd. ams AMS AG amstaos AMS-Taos Inc. +analogix Analogix Semiconductor, Inc. apm Applied Micro Circuits Corporation (APM) aptina Aptina Imaging arasan Arasan Chip Systems arm ARM Ltd. armadeus ARMadeus Systems SARL +arrow Arrow Electronics artesyn Artesyn Embedded Technologies Inc. asahi-kasei Asahi Kasei Corp. +aspeed ASPEED Technology Inc. atlas Atlas Scientific LLC atmel Atmel Corporation auo AU Optronics Corporation @@ -58,6 +62,7 @@ cnxt Conexant Systems, Inc. compulab CompuLab Ltd. cortina Cortina Systems, Inc. cosmic Cosmic Circuits +creative Creative Technology Ltd crystalfontz Crystalfontz America, Inc. cubietech Cubietech, Ltd. cypress Cypress Semiconductor Corporation @@ -70,11 +75,14 @@ digilent Diglent, Inc. dlg Dialog Semiconductor dlink D-Link Corporation dmo Data Modul AG +dptechnics DPTechnics +dragino Dragino Technology Co., Limited ea Embedded Artists AB ebv EBV Elektronik edt Emerging Display Technologies eeti eGalax_eMPIA Technology Inc elan Elan Microelectronic Corp. +embest Shenzhen Embest Technology Co., Ltd. emmicro EM Microelectronic energymicro Silicon Laboratories (formerly Energy Micro AS) epcos EPCOS AG @@ -86,11 +94,13 @@ eukrea Eukréa Electromatique everest Everest Semiconductor Co. Ltd. everspin Everspin Technologies, Inc. excito Excito +ezchip EZchip Semiconductor fcs Fairchild Semiconductor firefly Firefly focaltech FocalTech Systems Co.,Ltd fsl Freescale Semiconductor ge General Electric Company +geekbuying GeekBuying GEFanuc GE Fanuc Intelligent Platforms Embedded Systems, Inc. gef GE Fanuc Intelligent Platforms Embedded Systems, Inc. geniatech Geniatech, Inc. @@ -118,6 +128,7 @@ idt Integrated Device Technologies, Inc. ifi Ingenieurburo Fur Ic-Technologie (I/F/I) iom Iomega Corporation img Imagination Technologies Ltd. +inforce Inforce Computing ingenic Ingenic Semiconductor innolux Innolux Corporation intel Intel Corporation @@ -141,6 +152,7 @@ lsi LSI Corp. (LSI Logic) lltc Linear Technology Corporation marvell Marvell Technology Group Ltd. maxim Maxim Integrated Products +meas Measurement Specialties mediatek MediaTek Inc. melexis Melexis N.V. merrii Merrii Technology Co., Ltd. @@ -152,6 +164,7 @@ mitsubishi Mitsubishi Electric Corporation mosaixtech Mosaix Technologies, Inc. moxa Moxa mpl MPL AG +mqmaker mqmaker Inc. msi Micro-Star International Co. Ltd. mti Imagination Technologies Ltd. (formerly MIPS Technologies Inc.) mundoreader Mundo Reader S.L. @@ -171,12 +184,15 @@ nvidia NVIDIA nxp NXP Semiconductors okaya Okaya Electric America, Inc. olimex OLIMEX Ltd. +onion Onion Corporation onnn ON Semiconductor Corp. +ontat On Tat Industrial Company opencores OpenCores.org option Option NV ortustech Ortus Technology Co., Ltd. ovti OmniVision Technologies ORCL Oracle Corporation +oxsemi Oxford Semiconductor, Ltd. panasonic Panasonic Corporation parade Parade Technologies Inc. pericom Pericom Technology Inc. @@ -247,9 +263,11 @@ toradex Toradex AG toshiba Toshiba Corporation toumaz Toumaz tplink TP-LINK Technologies Co., Ltd. +tpk TPK U.S.A. LLC tronfy Tronfy tronsmart Tronsmart truly Truly Semiconductors Limited +tyan Tyan Computer Corporation upisemi uPI Semiconductor Corp. urt United Radiant Technology Corporation usi Universal Scientific Industrial Co., Ltd. @@ -259,6 +277,7 @@ via VIA Technologies, Inc. virtio Virtual I/O Device Specification, developed by the OASIS consortium vivante Vivante Corporation voipac Voipac Technologies s.r.o. +wd Western Digital Corp. wexler Wexler winbond Winbond Electronics corp. wlf Wolfson Microelectronics diff --git a/Documentation/devicetree/bindings/video/bridge/anx7814.txt b/Documentation/devicetree/bindings/video/bridge/anx7814.txt new file mode 100644 index 000000000000..b2a22c28c9b3 --- /dev/null +++ b/Documentation/devicetree/bindings/video/bridge/anx7814.txt @@ -0,0 +1,40 @@ +Analogix ANX7814 SlimPort (Full-HD Transmitter) +----------------------------------------------- + +The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter +designed for portable devices. + +Required properties: + + - compatible : "analogix,anx7814" + - reg : I2C address of the device + - interrupt-parent : Should be the phandle of the interrupt controller + that services interrupts for this device + - interrupts : Should contain the INTP interrupt + - hpd-gpios : Which GPIO to use for hpd + - pd-gpios : Which GPIO to use for power down + - reset-gpios : Which GPIO to use for reset + +Optional properties: + + - dvdd10-supply : Regulator for 1.0V digital core power. + - Video port for HDMI input, using the DT bindings defined in [1]. + +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt + +Example: + + anx7814: anx7814@38 { + compatible = "analogix,anx7814"; + reg = <0x38>; + interrupt-parent = <&gpio0>; + interrupts = <99 IRQ_TYPE_LEVEL_LOW>; /* INTP */ + hpd-gpios = <&pio 36 GPIO_ACTIVE_HIGH>; + pd-gpios = <&pio 33 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>; + port { + anx7814_in: endpoint { + remote-endpoint = <&hdmi0_out>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt index 8dab6fd024aa..107280ef0025 100644 --- a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt @@ -5,10 +5,12 @@ Required properties: - reg : Should contain WDT registers location and length - interrupts : Should contain WDT interrupt -Optional property: +Optional properties: - big-endian: If present the watchdog device's registers are implemented in big endian mode, otherwise in native mode(same with CPU), for more detail please see: Documentation/devicetree/bindings/regmap/regmap.txt. +- fsl,ext-reset-output: If present the watchdog device is configured to + assert its external reset (WDOG_B) instead of issuing a software reset. Examples: diff --git a/Documentation/devicetree/bindings/watchdog/microchip,pic32-dmt.txt b/Documentation/devicetree/bindings/watchdog/microchip,pic32-dmt.txt new file mode 100644 index 000000000000..852f694f3177 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/microchip,pic32-dmt.txt @@ -0,0 +1,19 @@ +* Microchip PIC32 Deadman Timer + +The deadman timer is used to reset the processor in the event of a software +malfunction. It is a free-running instruction fetch timer, which is clocked +whenever an instruction fetch occurs until a count match occurs. + +Required properties: +- compatible: must be "microchip,pic32mzda-dmt". +- reg: physical base address of the controller and length of memory mapped + region. +- clocks: phandle of parent clock (should be &PBCLK7). + +Example: + + watchdog@1f800a00 { + compatible = "microchip,pic32mzda-dmt"; + reg = <0x1f800a00 0x80>; + clocks = <&PBCLK7>; + }; diff --git a/Documentation/devicetree/bindings/watchdog/microchip,pic32-wdt.txt b/Documentation/devicetree/bindings/watchdog/microchip,pic32-wdt.txt new file mode 100644 index 000000000000..d1401030e75c --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/microchip,pic32-wdt.txt @@ -0,0 +1,18 @@ +* Microchip PIC32 Watchdog Timer + +When enabled, the watchdog peripheral can be used to reset the device if the +WDT is not cleared periodically in software. + +Required properties: +- compatible: must be "microchip,pic32mzda-wdt". +- reg: physical base address of the controller and length of memory mapped + region. +- clocks: phandle of source clk. should be <&LPRC> clk. + +Example: + + watchdog@1f800800 { + compatible = "microchip,pic32mzda-wdt"; + reg = <0x1f800800 0x200>; + clocks = <&LPRC>; + }; diff --git a/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt b/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt new file mode 100644 index 000000000000..b9512f1eb80a --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt @@ -0,0 +1,25 @@ +Renesas Watchdog Timer (WDT) Controller + +Required properties: +- compatible : Should be "renesas,r8a7795-wdt", or "renesas,rcar-gen3-wdt" + + When compatible with the generic version, nodes must list the SoC-specific + version corresponding to the platform first, followed by the generic + version. + +- reg : Should contain WDT registers location and length +- clocks : the clock feeding the watchdog timer. + +Optional properties: +- timeout-sec : Contains the watchdog timeout in seconds +- power-domains : the power domain the WDT belongs to + +Examples: + + wdt0: watchdog@e6020000 { + compatible = "renesas,r8a7795-wdt", "renesas,rcar-gen3-wdt"; + reg = <0 0xe6020000 0 0x0c>; + clocks = <&cpg CPG_MOD 402>; + power-domains = <&cpg>; + timeout-sec = <60>; + }; diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt index 73b98dfbcea4..c63eea0c1c8c 100644 --- a/Documentation/driver-model/devres.txt +++ b/Documentation/driver-model/devres.txt @@ -236,6 +236,7 @@ certainly invest a bit more effort into libata core layer). CLOCK devm_clk_get() devm_clk_put() + devm_clk_hw_register() DMA dmam_alloc_coherent() @@ -267,6 +268,13 @@ IIO devm_iio_kfifo_free() devm_iio_trigger_alloc() devm_iio_trigger_free() + devm_iio_channel_get() + devm_iio_channel_release() + devm_iio_channel_get_all() + devm_iio_channel_release_all() + +INPUT + devm_input_allocate_device() IO region devm_release_mem_region() @@ -317,6 +325,9 @@ MEM devm_kvasprintf() devm_kzalloc() +MFD + devm_mfd_add_devices() + PCI pcim_enable_device() : after success, all PCI ops become managed pcim_pin_device() : keep PCI device enabled after release @@ -328,6 +339,8 @@ PHY PINCTRL devm_pinctrl_get() devm_pinctrl_put() + devm_pinctrl_register() + devm_pinctrl_unregister() PWM devm_pwm_get() diff --git a/Documentation/fb/udlfb.txt b/Documentation/fb/udlfb.txt index 57d2f2908b12..c985cb65dd06 100644 --- a/Documentation/fb/udlfb.txt +++ b/Documentation/fb/udlfb.txt @@ -9,7 +9,7 @@ pairing that with a hardware framebuffer (16MB) on the other end of the USB wire. That hardware framebuffer is able to drive the VGA, DVI, or HDMI monitor with no CPU involvement until a pixel has to change. -The CPU or other local resource does all the rendering; optinally compares the +The CPU or other local resource does all the rendering; optionally compares the result with a local shadow of the remote hardware framebuffer to identify the minimal set of pixels that have changed; and compresses and sends those pixels line-by-line via USB bulk transfers. @@ -66,10 +66,10 @@ means that from a hardware and fbdev software perspective, everything is good. At that point, a /dev/fb? interface will be present for user-mode applications to open and begin writing to the framebuffer of the DisplayLink device using standard fbdev calls. Note that if mmap() is used, by default the user mode -application must send down damage notifcations to trigger repaints of the +application must send down damage notifications to trigger repaints of the changed regions. Alternatively, udlfb can be recompiled with experimental defio support enabled, to support a page-fault based detection mechanism -that can work without explicit notifcation. +that can work without explicit notification. The most common client of udlfb is xf86-video-displaylink or a modified xf86-video-fbdev X server. These servers have no real DisplayLink specific diff --git a/Documentation/features/perf/perf-regs/arch-support.txt b/Documentation/features/perf/perf-regs/arch-support.txt index e2b4a78ec543..f179b1fb26ef 100644 --- a/Documentation/features/perf/perf-regs/arch-support.txt +++ b/Documentation/features/perf/perf-regs/arch-support.txt @@ -27,7 +27,7 @@ | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | - | powerpc: | TODO | + | powerpc: | ok | | s390: | TODO | | score: | TODO | | sh: | TODO | diff --git a/Documentation/features/perf/perf-stackdump/arch-support.txt b/Documentation/features/perf/perf-stackdump/arch-support.txt index 3dc24b0673c0..85777c5c6353 100644 --- a/Documentation/features/perf/perf-stackdump/arch-support.txt +++ b/Documentation/features/perf/perf-stackdump/arch-support.txt @@ -27,7 +27,7 @@ | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | - | powerpc: | TODO | + | powerpc: | ok | | s390: | TODO | | score: | TODO | | sh: | TODO | diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index 619af9bfdcb3..75eea7ce3d7c 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -194,7 +194,7 @@ prototypes: void (*invalidatepage) (struct page *, unsigned int, unsigned int); int (*releasepage) (struct page *, int); void (*freepage)(struct page *); - int (*direct_IO)(struct kiocb *, struct iov_iter *iter, loff_t offset); + int (*direct_IO)(struct kiocb *, struct iov_iter *iter); int (*migratepage)(struct address_space *, struct page *, struct page *); int (*launder_page)(struct page *); int (*is_partially_uptodate)(struct page *, unsigned long, unsigned long); diff --git a/Documentation/filesystems/cifs/README b/Documentation/filesystems/cifs/README index 2d5622f60e11..a54788405429 100644 --- a/Documentation/filesystems/cifs/README +++ b/Documentation/filesystems/cifs/README @@ -272,7 +272,7 @@ A partial list of the supported mount options follows: same domain (e.g. running winbind or nss_ldap) and the server supports the Unix Extensions then the uid and gid can be retrieved from the server (and uid - and gid would not have to be specifed on the mount. + and gid would not have to be specified on the mount. For servers which do not support the CIFS Unix extensions, the default uid (and gid) returned on lookup of existing files will be the uid (gid) of the person diff --git a/Documentation/filesystems/nilfs2.txt b/Documentation/filesystems/nilfs2.txt index 41c3d332acc9..5b21ef76f751 100644 --- a/Documentation/filesystems/nilfs2.txt +++ b/Documentation/filesystems/nilfs2.txt @@ -268,3 +268,8 @@ among NILFS2 files can be depicted as follows: ( regular file, directory, or symlink ) For detail on the format of each file, please see include/linux/nilfs2_fs.h. + +There are no patents or other intellectual property that we protect +with regard to the design of NILFS2. It is allowed to replicate the +design in hopes that other operating systems could share (mount, read, +write, etc.) data stored in this format. diff --git a/Documentation/filesystems/pohmelfs/design_notes.txt b/Documentation/filesystems/pohmelfs/design_notes.txt index 8aef91335701..106d17fbb05f 100644 --- a/Documentation/filesystems/pohmelfs/design_notes.txt +++ b/Documentation/filesystems/pohmelfs/design_notes.txt @@ -29,7 +29,7 @@ Main features of this FS include: * Read request (data read, directory listing, lookup requests) balancing between multiple servers. * Write requests are replicated to multiple servers and completed only when all of them are acked. * Ability to add and/or remove servers from the working set at run-time. - * Strong authentification and possible data encryption in network channel. + * Strong authentication and possible data encryption in network channel. * Extended attributes support. POHMELFS is based on transactions, which are potentially long-standing objects that live diff --git a/Documentation/filesystems/porting b/Documentation/filesystems/porting index f1b87d8aa2da..46f3bb7a02f5 100644 --- a/Documentation/filesystems/porting +++ b/Documentation/filesystems/porting @@ -525,3 +525,56 @@ in your dentry operations instead. set_delayed_call() where it used to set *cookie. ->put_link() is gone - just give the destructor to set_delayed_call() in ->get_link(). +-- +[mandatory] + ->getxattr() and xattr_handler.get() get dentry and inode passed separately. + dentry might be yet to be attached to inode, so do _not_ use its ->d_inode + in the instances. Rationale: !@#!@# security_d_instantiate() needs to be + called before we attach dentry to inode. +-- +[mandatory] + symlinks are no longer the only inodes that do *not* have i_bdev/i_cdev/ + i_pipe/i_link union zeroed out at inode eviction. As the result, you can't + assume that non-NULL value in ->i_nlink at ->destroy_inode() implies that + it's a symlink. Checking ->i_mode is really needed now. In-tree we had + to fix shmem_destroy_callback() that used to take that kind of shortcut; + watch out, since that shortcut is no longer valid. +-- +[mandatory] + ->i_mutex is replaced with ->i_rwsem now. inode_lock() et.al. work as + they used to - they just take it exclusive. However, ->lookup() may be + called with parent locked shared. Its instances must not + * use d_instantiate) and d_rehash() separately - use d_add() or + d_splice_alias() instead. + * use d_rehash() alone - call d_add(new_dentry, NULL) instead. + * in the unlikely case when (read-only) access to filesystem + data structures needs exclusion for some reason, arrange it + yourself. None of the in-tree filesystems needed that. + * rely on ->d_parent and ->d_name not changing after dentry has + been fed to d_add() or d_splice_alias(). Again, none of the + in-tree instances relied upon that. + We are guaranteed that lookups of the same name in the same directory + will not happen in parallel ("same" in the sense of your ->d_compare()). + Lookups on different names in the same directory can and do happen in + parallel now. +-- +[recommended] + ->iterate_shared() is added; it's a parallel variant of ->iterate(). + Exclusion on struct file level is still provided (as well as that + between it and lseek on the same struct file), but if your directory + has been opened several times, you can get these called in parallel. + Exclusion between that method and all directory-modifying ones is + still provided, of course. + + Often enough ->iterate() can serve as ->iterate_shared() without any + changes - it is a read-only operation, after all. If you have any + per-inode or per-dentry in-core data structures modified by ->iterate(), + you might need something to serialize the access to them. If you + do dcache pre-seeding, you'll need to switch to d_alloc_parallel() for + that; look for in-tree examples. + + Old method is only used if the new one is absent; eventually it will + be removed. Switch while you still can; the old one won't stay. +-- +[mandatory] + ->atomic_open() calls without O_CREAT may happen in parallel. diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index 7f5607a089b4..e8d00759bfa5 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -225,6 +225,7 @@ Table 1-2: Contents of the status files (as of 4.1) TracerPid PID of process tracing this process (0 if not) Uid Real, effective, saved set, and file system UIDs Gid Real, effective, saved set, and file system GIDs + Umask file mode creation mask FDSize number of file descriptor slots currently allocated Groups supplementary group list NStgid descendant namespace thread group ID hierarchy diff --git a/Documentation/filesystems/qnx6.txt b/Documentation/filesystems/qnx6.txt index 408679789136..4f3d6a882bdc 100644 --- a/Documentation/filesystems/qnx6.txt +++ b/Documentation/filesystems/qnx6.txt @@ -16,7 +16,7 @@ qnx6fs shares many properties with traditional Unix filesystems. It has the concepts of blocks, inodes and directories. On QNX it is possible to create little endian and big endian qnx6 filesystems. This feature makes it possible to create and use a different endianness fs -for the target (QNX is used on quite a range of embedded systems) plattform +for the target (QNX is used on quite a range of embedded systems) platform running on a different endianness. The Linux driver handles endianness transparently. (LE and BE) diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index 4164bd6397a2..c61a223ef3ff 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -591,7 +591,7 @@ struct address_space_operations { void (*invalidatepage) (struct page *, unsigned int, unsigned int); int (*releasepage) (struct page *, int); void (*freepage)(struct page *); - ssize_t (*direct_IO)(struct kiocb *, struct iov_iter *iter, loff_t offset); + ssize_t (*direct_IO)(struct kiocb *, struct iov_iter *iter); /* migrate the contents of a page to the specified target */ int (*migratepage) (struct page *, struct page *); int (*launder_page) (struct page *); diff --git a/Documentation/firmware_class/README b/Documentation/firmware_class/README index 71f86859d7d8..cafdca8b3b15 100644 --- a/Documentation/firmware_class/README +++ b/Documentation/firmware_class/README @@ -20,7 +20,7 @@ 1), kernel(driver): - calls request_firmware(&fw_entry, $FIRMWARE, device) - - kernel searchs the fimware image with name $FIRMWARE directly + - kernel searches the firmware image with name $FIRMWARE directly in the below search path of root filesystem: User customized search path by module parameter 'path'[1] "/lib/firmware/updates/" UTS_RELEASE, diff --git a/Documentation/gdb-kernel-debugging.txt b/Documentation/gdb-kernel-debugging.txt index 7050ce8794b9..4ab7d43d0754 100644 --- a/Documentation/gdb-kernel-debugging.txt +++ b/Documentation/gdb-kernel-debugging.txt @@ -139,6 +139,27 @@ Examples of using the Linux-provided gdb helpers start_comm = "swapper/2\000\000\000\000\000\000" } + o Dig into a radix tree data structure, such as the IRQ descriptors: + (gdb) print (struct irq_desc)$lx_radix_tree_lookup(irq_desc_tree, 18) + $6 = { + irq_common_data = { + state_use_accessors = 67584, + handler_data = 0x0 <__vectors_start>, + msi_desc = 0x0 <__vectors_start>, + affinity = {{ + bits = {65535} + }} + }, + irq_data = { + mask = 0, + irq = 18, + hwirq = 27, + common = 0xee803d80, + chip = 0xc0eb0854 <gic_data>, + domain = 0xee808000, + parent_data = 0x0 <__vectors_start>, + chip_data = 0xc0eb0854 <gic_data> + } <... trimmed ...> List of commands and functions ------------------------------ diff --git a/Documentation/gpio/driver.txt b/Documentation/gpio/driver.txt index bbeec415f406..6cb35a78eff4 100644 --- a/Documentation/gpio/driver.txt +++ b/Documentation/gpio/driver.txt @@ -68,6 +68,103 @@ control callbacks) if it is expected to call GPIO APIs from atomic context on -RT (inside hard IRQ handlers and similar contexts). Normally this should not be required. + +GPIOs with open drain/source support +------------------------------------ + +Open drain (CMOS) or open collector (TTL) means the line is not actively driven +high: instead you provide the drain/collector as output, so when the transistor +is not open, it will present a high-impedance (tristate) to the external rail. + + + CMOS CONFIGURATION TTL CONFIGURATION + + ||--- out +--- out + in ----|| |/ + ||--+ in ----| + | |\ + GND GND + +This configuration is normally used as a way to achieve one of two things: + +- Level-shifting: to reach a logical level higher than that of the silicon + where the output resides. + +- inverse wire-OR on an I/O line, for example a GPIO line, making it possible + for any driving stage on the line to drive it low even if any other output + to the same line is simultaneously driving it high. A special case of this + is driving the SCL and SCA lines of an I2C bus, which is by definition a + wire-OR bus. + +Both usecases require that the line be equipped with a pull-up resistor. This +resistor will make the line tend to high level unless one of the transistors on +the rail actively pulls it down. + +The level on the line will go as high as the VDD on the pull-up resistor, which +may be higher than the level supported by the transistor, achieveing a +level-shift to the higher VDD. + +Integrated electronics often have an output driver stage in the form of a CMOS +"totem-pole" with one N-MOS and one P-MOS transistor where one of them drives +the line high and one of them drives the line low. This is called a push-pull +output. The "totem-pole" looks like so: + + VDD + | + OD ||--+ + +--/ ---o|| P-MOS-FET + | ||--+ +IN --+ +----- out + | ||--+ + +--/ ----|| N-MOS-FET + OS ||--+ + | + GND + +The desired output signal (e.g. coming directly from some GPIO output register) +arrives at IN. The switches named "OD" and "OS" are normally closed, creating +a push-pull circuit. + +Consider the little "switches" named "OD" and "OS" that enable/disable the +P-MOS or N-MOS transistor right after the split of the input. As you can see, +either transistor will go totally numb if this switch is open. The totem-pole +is then halved and give high impedance instead of actively driving the line +high or low respectively. That is usually how software-controlled open +drain/source works. + +Some GPIO hardware come in open drain / open source configuration. Some are +hard-wired lines that will only support open drain or open source no matter +what: there is only one transistor there. Some are software-configurable: +by flipping a bit in a register the output can be configured as open drain +or open source, in practice by flicking open the switches labeled "OD" and "OS" +in the drawing above. + +By disabling the P-MOS transistor, the output can be driven between GND and +high impedance (open drain), and by disabling the N-MOS transistor, the output +can be driven between VDD and high impedance (open source). In the first case, +a pull-up resistor is needed on the outgoing rail to complete the circuit, and +in the second case, a pull-down resistor is needed on the rail. + +Hardware that supports open drain or open source or both, can implement a +special callback in the gpio_chip: .set_single_ended() that takes an enum flag +telling whether to configure the line as open drain, open source or push-pull. +This will happen in response to the GPIO_OPEN_DRAIN or GPIO_OPEN_SOURCE flag +set in the machine file, or coming from other hardware descriptions. + +If this state can not be configured in hardware, i.e. if the GPIO hardware does +not support open drain/open source in hardware, the GPIO library will instead +use a trick: when a line is set as output, if the line is flagged as open +drain, and the IN output value is low, it will be driven low as usual. But +if the IN output value is set to high, it will instead *NOT* be driven high, +instead it will be switched to input, as input mode is high impedance, thus +achieveing an "open drain emulation" of sorts: electrically the behaviour will +be identical, with the exception of possible hardware glitches when switching +the mode of the line. + +For open source configuration the same principle is used, just that instead +of actively driving the line low, it is set to input. + + GPIO drivers providing IRQs --------------------------- It is custom that GPIO drivers (GPIO chips) are also providing interrupts, diff --git a/Documentation/hwmon/abituguru b/Documentation/hwmon/abituguru index 915f32063a26..f1d4fe4c366c 100644 --- a/Documentation/hwmon/abituguru +++ b/Documentation/hwmon/abituguru @@ -25,7 +25,7 @@ Supported chips: 1) For revisions 2 and 3 uGuru's the driver can autodetect the sensortype (Volt or Temp) for bank1 sensors, for revision 1 uGuru's this doesnot always work. For these uGuru's the autodection can - be overriden with the bank1_types module param. For all 3 known + be overridden with the bank1_types module param. For all 3 known revison 1 motherboards the correct use of this param is: bank1_types=1,1,0,0,0,0,0,2,0,0,0,0,2,0,0,1 You may also need to specify the fan_sensors option for these boards diff --git a/Documentation/hwmon/fam15h_power b/Documentation/hwmon/fam15h_power index e2b1b69eebea..fb594c281c46 100644 --- a/Documentation/hwmon/fam15h_power +++ b/Documentation/hwmon/fam15h_power @@ -10,14 +10,22 @@ Supported chips: Datasheets: BIOS and Kernel Developer's Guide (BKDG) For AMD Family 15h Processors BIOS and Kernel Developer's Guide (BKDG) For AMD Family 16h Processors + AMD64 Architecture Programmer's Manual Volume 2: System Programming Author: Andreas Herrmann <herrmann.der.user@googlemail.com> Description ----------- +1) Processor TDP (Thermal design power) + +Given a fixed frequency and voltage, the power consumption of a +processor varies based on the workload being executed. Derated power +is the power consumed when running a specific application. Thermal +design power (TDP) is an example of derated power. + This driver permits reading of registers providing power information -of AMD Family 15h and 16h processors. +of AMD Family 15h and 16h processors via TDP algorithm. For AMD Family 15h and 16h processors the following power values can be calculated using different processor northbridge function @@ -37,3 +45,58 @@ This driver provides ProcessorPwrWatts and CurrPwrWatts: On multi-node processors the calculated value is for the entire package and not for a single node. Thus the driver creates sysfs attributes only for internal node0 of a multi-node processor. + +2) Accumulated Power Mechanism + +This driver also introduces an algorithm that should be used to +calculate the average power consumed by a processor during a +measurement interval Tm. The feature of accumulated power mechanism is +indicated by CPUID Fn8000_0007_EDX[12]. + +* Tsample: compute unit power accumulator sample period +* Tref: the PTSC counter period +* PTSC: performance timestamp counter +* N: the ratio of compute unit power accumulator sample period to the + PTSC period +* Jmax: max compute unit accumulated power which is indicated by + MaxCpuSwPwrAcc MSR C001007b +* Jx/Jy: compute unit accumulated power which is indicated by + CpuSwPwrAcc MSR C001007a +* Tx/Ty: the value of performance timestamp counter which is indicated + by CU_PTSC MSR C0010280 +* PwrCPUave: CPU average power + +i. Determine the ratio of Tsample to Tref by executing CPUID Fn8000_0007. + N = value of CPUID Fn8000_0007_ECX[CpuPwrSampleTimeRatio[15:0]]. + +ii. Read the full range of the cumulative energy value from the new +MSR MaxCpuSwPwrAcc. + Jmax = value returned. +iii. At time x, SW reads CpuSwPwrAcc MSR and samples the PTSC. + Jx = value read from CpuSwPwrAcc and Tx = value read from +PTSC. + +iv. At time y, SW reads CpuSwPwrAcc MSR and samples the PTSC. + Jy = value read from CpuSwPwrAcc and Ty = value read from +PTSC. + +v. Calculate the average power consumption for a compute unit over +time period (y-x). Unit of result is uWatt. + if (Jy < Jx) // Rollover has occurred + Jdelta = (Jy + Jmax) - Jx + else + Jdelta = Jy - Jx + PwrCPUave = N * Jdelta * 1000 / (Ty - Tx) + +This driver provides PwrCPUave and interval(default is 10 millisecond +and maximum is 1 second): +* power1_average (PwrCPUave) +* power1_average_interval (Interval) + +The power1_average_interval can be updated at /etc/sensors3.conf file +as below: + +chip "fam15h_power-*" + set power1_average_interval 0.01 + +Then save it with "sensors -s". diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87 index 733296d65449..fff6f6bf55bc 100644 --- a/Documentation/hwmon/it87 +++ b/Documentation/hwmon/it87 @@ -9,6 +9,9 @@ Supported chips: * IT8620E Prefix: 'it8620' Addresses scanned: from Super I/O config space (8 I/O ports) + * IT8628E + Prefix: 'it8628' + Addresses scanned: from Super I/O config space (8 I/O ports) Datasheet: Not publicly available * IT8705F Prefix: 'it87' @@ -114,8 +117,8 @@ motherboard models. Description ----------- -This driver implements support for the IT8603E, IT8620E, IT8623E, IT8705F, -IT8712F, IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8732F, +This driver implements support for the IT8603E, IT8620E, IT8623E, IT8628E, +IT8705F, IT8712F, IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8732F, IT8758E, IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E, and SiS950 chips. @@ -158,8 +161,8 @@ The IT8603E/IT8623E is a custom design, hardware monitoring part is similar to IT8728F. It only supports 3 fans, 16-bit fan mode, and the full speed mode of the fan is not supported (value 0 of pwmX_enable). -The IT8620E is another custom design, hardware monitoring part is similar to -IT8728F. It only supports 16-bit fan mode. +The IT8620E and IT8628E are custom designs, hardware monitoring part is similar +to IT8728F. It only supports 16-bit fan mode. Both chips support up to 6 fans. The IT8790E supports up to 3 fans. 16-bit fan mode is always enabled. @@ -187,8 +190,8 @@ of 0.016 volt. IT8603E, IT8721F/IT8758E and IT8728F can measure between 0 and 2.8 volts with a resolution of 0.0109 volt. The battery voltage in8 does not have limit registers. -On the IT8603E, IT8721F/IT8758E, IT8732F, IT8781F, IT8782F, and IT8783E/F, some -voltage inputs are internal and scaled inside the chip: +On the IT8603E, IT8620E, IT8628E, IT8721F/IT8758E, IT8732F, IT8781F, IT8782F, +and IT8783E/F, some voltage inputs are internal and scaled inside the chip: * in3 (optional) * in7 (optional for IT8781F, IT8782F, and IT8783E/F) * in8 (always) diff --git a/Documentation/hwmon/max31722 b/Documentation/hwmon/max31722 new file mode 100644 index 000000000000..090da84538c8 --- /dev/null +++ b/Documentation/hwmon/max31722 @@ -0,0 +1,34 @@ +Kernel driver max31722 +====================== + +Supported chips: + * Maxim Integrated MAX31722 + Prefix: 'max31722' + ACPI ID: MAX31722 + Addresses scanned: - + Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX31722-MAX31723.pdf + * Maxim Integrated MAX31723 + Prefix: 'max31723' + ACPI ID: MAX31723 + Addresses scanned: - + Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX31722-MAX31723.pdf + +Author: Tiberiu Breana <tiberiu.a.breana@intel.com> + +Description +----------- + +This driver adds support for the Maxim Integrated MAX31722/MAX31723 thermometers +and thermostats running over an SPI interface. + +Usage Notes +----------- + +This driver uses ACPI to auto-detect devices. See ACPI IDs in the above section. + +Sysfs entries +------------- + +The following attribute is supported: + +temp1_input Measured temperature. Read-only. diff --git a/Documentation/i2c/i2c-topology b/Documentation/i2c/i2c-topology new file mode 100644 index 000000000000..e0aefeece551 --- /dev/null +++ b/Documentation/i2c/i2c-topology @@ -0,0 +1,370 @@ +I2C topology +============ + +There are a couple of reasons for building more complex i2c topologies +than a straight-forward i2c bus with one adapter and one or more devices. + +1. A mux may be needed on the bus to prevent address collisions. + +2. The bus may be accessible from some external bus master, and arbitration + may be needed to determine if it is ok to access the bus. + +3. A device (particularly RF tuners) may want to avoid the digital noise + from the i2c bus, at least most of the time, and sits behind a gate + that has to be operated before the device can be accessed. + +Etc + +These constructs are represented as i2c adapter trees by Linux, where +each adapter has a parent adapter (except the root adapter) and zero or +more child adapters. The root adapter is the actual adapter that issues +i2c transfers, and all adapters with a parent are part of an "i2c-mux" +object (quoted, since it can also be an arbitrator or a gate). + +Depending of the particular mux driver, something happens when there is +an i2c transfer on one of its child adapters. The mux driver can +obviously operate a mux, but it can also do arbitration with an external +bus master or open a gate. The mux driver has two operations for this, +select and deselect. select is called before the transfer and (the +optional) deselect is called after the transfer. + + +Locking +======= + +There are two variants of locking available to i2c muxes, they can be +mux-locked or parent-locked muxes. As is evident from below, it can be +useful to know if a mux is mux-locked or if it is parent-locked. The +following list was correct at the time of writing: + +In drivers/i2c/muxes/ +i2c-arb-gpio-challenge Parent-locked +i2c-mux-gpio Normally parent-locked, mux-locked iff + all involved gpio pins are controlled by the + same i2c root adapter that they mux. +i2c-mux-pca9541 Parent-locked +i2c-mux-pca954x Parent-locked +i2c-mux-pinctrl Normally parent-locked, mux-locked iff + all involved pinctrl devices are controlled + by the same i2c root adapter that they mux. +i2c-mux-reg Parent-locked + +In drivers/iio/ +imu/inv_mpu6050/ Mux-locked + +In drivers/media/ +dvb-frontends/m88ds3103 Parent-locked +dvb-frontends/rtl2830 Parent-locked +dvb-frontends/rtl2832 Mux-locked +dvb-frontends/si2168 Mux-locked +usb/cx231xx/ Parent-locked + + +Mux-locked muxes +---------------- + +Mux-locked muxes does not lock the entire parent adapter during the +full select-transfer-deselect transaction, only the muxes on the parent +adapter are locked. Mux-locked muxes are mostly interesting if the +select and/or deselect operations must use i2c transfers to complete +their tasks. Since the parent adapter is not fully locked during the +full transaction, unrelated i2c transfers may interleave the different +stages of the transaction. This has the benefit that the mux driver +may be easier and cleaner to implement, but it has some caveats. + +ML1. If you build a topology with a mux-locked mux being the parent + of a parent-locked mux, this might break the expectation from the + parent-locked mux that the root adapter is locked during the + transaction. + +ML2. It is not safe to build arbitrary topologies with two (or more) + mux-locked muxes that are not siblings, when there are address + collisions between the devices on the child adapters of these + non-sibling muxes. + + I.e. the select-transfer-deselect transaction targeting e.g. device + address 0x42 behind mux-one may be interleaved with a similar + operation targeting device address 0x42 behind mux-two. The + intension with such a topology would in this hypothetical example + be that mux-one and mux-two should not be selected simultaneously, + but mux-locked muxes do not guarantee that in all topologies. + +ML3. A mux-locked mux cannot be used by a driver for auto-closing + gates/muxes, i.e. something that closes automatically after a given + number (one, in most cases) of i2c transfers. Unrelated i2c transfers + may creep in and close prematurely. + +ML4. If any non-i2c operation in the mux driver changes the i2c mux state, + the driver has to lock the root adapter during that operation. + Otherwise garbage may appear on the bus as seen from devices + behind the mux, when an unrelated i2c transfer is in flight during + the non-i2c mux-changing operation. + + +Mux-locked Example +------------------ + + .----------. .--------. + .--------. | mux- |-----| dev D1 | + | root |--+--| locked | '--------' + '--------' | | mux M1 |--. .--------. + | '----------' '--| dev D2 | + | .--------. '--------' + '--| dev D3 | + '--------' + +When there is an access to D1, this happens: + + 1. Someone issues an i2c-transfer to D1. + 2. M1 locks muxes on its parent (the root adapter in this case). + 3. M1 calls ->select to ready the mux. + 4. M1 (presumably) does some i2c-transfers as part of its select. + These transfers are normal i2c-transfers that locks the parent + adapter. + 5. M1 feeds the i2c-transfer from step 1 to its parent adapter as a + normal i2c-transfer that locks the parent adapter. + 6. M1 calls ->deselect, if it has one. + 7. Same rules as in step 4, but for ->deselect. + 8. M1 unlocks muxes on its parent. + +This means that accesses to D2 are lockout out for the full duration +of the entire operation. But accesses to D3 are possibly interleaved +at any point. + + +Parent-locked muxes +------------------- + +Parent-locked muxes lock the parent adapter during the full select- +transfer-deselect transaction. The implication is that the mux driver +has to ensure that any and all i2c transfers through that parent +adapter during the transaction are unlocked i2c transfers (using e.g. +__i2c_transfer), or a deadlock will follow. There are a couple of +caveats. + +PL1. If you build a topology with a parent-locked mux being the child + of another mux, this might break a possible assumption from the + child mux that the root adapter is unused between its select op + and the actual transfer (e.g. if the child mux is auto-closing + and the parent mux issus i2c-transfers as part of its select). + This is especially the case if the parent mux is mux-locked, but + it may also happen if the parent mux is parent-locked. + +PL2. If select/deselect calls out to other subsystems such as gpio, + pinctrl, regmap or iio, it is essential that any i2c transfers + caused by these subsystems are unlocked. This can be convoluted to + accomplish, maybe even impossible if an acceptably clean solution + is sought. + + +Parent-locked Example +--------------------- + + .----------. .--------. + .--------. | parent- |-----| dev D1 | + | root |--+--| locked | '--------' + '--------' | | mux M1 |--. .--------. + | '----------' '--| dev D2 | + | .--------. '--------' + '--| dev D3 | + '--------' + +When there is an access to D1, this happens: + + 1. Someone issues an i2c-transfer to D1. + 2. M1 locks muxes on its parent (the root adapter in this case). + 3. M1 locks its parent adapter. + 4. M1 calls ->select to ready the mux. + 5. If M1 does any i2c-transfers (on this root adapter) as part of + its select, those transfers must be unlocked i2c-transfers so + that they do not deadlock the root adapter. + 6. M1 feeds the i2c-transfer from step 1 to the root adapter as an + unlocked i2c-transfer, so that it does not deadlock the parent + adapter. + 7. M1 calls ->deselect, if it has one. + 8. Same rules as in step 5, but for ->deselect. + 9. M1 unlocks its parent adapter. +10. M1 unlocks muxes on its parent. + + +This means that accesses to both D2 and D3 are locked out for the full +duration of the entire operation. + + +Complex Examples +================ + +Parent-locked mux as parent of parent-locked mux +------------------------------------------------ + +This is a useful topology, but it can be bad. + + .----------. .----------. .--------. + .--------. | parent- |-----| parent- |-----| dev D1 | + | root |--+--| locked | | locked | '--------' + '--------' | | mux M1 |--. | mux M2 |--. .--------. + | '----------' | '----------' '--| dev D2 | + | .--------. | .--------. '--------' + '--| dev D4 | '--| dev D3 | + '--------' '--------' + +When any device is accessed, all other devices are locked out for +the full duration of the operation (both muxes lock their parent, +and specifically when M2 requests its parent to lock, M1 passes +the buck to the root adapter). + +This topology is bad if M2 is an auto-closing mux and M1->select +issues any unlocked i2c transfers on the root adapter that may leak +through and be seen by the M2 adapter, thus closing M2 prematurely. + + +Mux-locked mux as parent of mux-locked mux +------------------------------------------ + +This is a good topology. + + .----------. .----------. .--------. + .--------. | mux- |-----| mux- |-----| dev D1 | + | root |--+--| locked | | locked | '--------' + '--------' | | mux M1 |--. | mux M2 |--. .--------. + | '----------' | '----------' '--| dev D2 | + | .--------. | .--------. '--------' + '--| dev D4 | '--| dev D3 | + '--------' '--------' + +When device D1 is accessed, accesses to D2 are locked out for the +full duration of the operation (muxes on the top child adapter of M1 +are locked). But accesses to D3 and D4 are possibly interleaved at +any point. Accesses to D3 locks out D1 and D2, but accesses to D4 +are still possibly interleaved. + + +Mux-locked mux as parent of parent-locked mux +--------------------------------------------- + +This is probably a bad topology. + + .----------. .----------. .--------. + .--------. | mux- |-----| parent- |-----| dev D1 | + | root |--+--| locked | | locked | '--------' + '--------' | | mux M1 |--. | mux M2 |--. .--------. + | '----------' | '----------' '--| dev D2 | + | .--------. | .--------. '--------' + '--| dev D4 | '--| dev D3 | + '--------' '--------' + +When device D1 is accessed, accesses to D2 and D3 are locked out +for the full duration of the operation (M1 locks child muxes on the +root adapter). But accesses to D4 are possibly interleaved at any +point. + +This kind of topology is generally not suitable and should probably +be avoided. The reason is that M2 probably assumes that there will +be no i2c transfers during its calls to ->select and ->deselect, and +if there are, any such transfers might appear on the slave side of M2 +as partial i2c transfers, i.e. garbage or worse. This might cause +device lockups and/or other problems. + +The topology is especially troublesome if M2 is an auto-closing +mux. In that case, any interleaved accesses to D4 might close M2 +prematurely, as might any i2c-transfers part of M1->select. + +But if M2 is not making the above stated assumption, and if M2 is not +auto-closing, the topology is fine. + + +Parent-locked mux as parent of mux-locked mux +--------------------------------------------- + +This is a good topology. + + .----------. .----------. .--------. + .--------. | parent- |-----| mux- |-----| dev D1 | + | root |--+--| locked | | locked | '--------' + '--------' | | mux M1 |--. | mux M2 |--. .--------. + | '----------' | '----------' '--| dev D2 | + | .--------. | .--------. '--------' + '--| dev D4 | '--| dev D3 | + '--------' '--------' + +When D1 is accessed, accesses to D2 are locked out for the full +duration of the operation (muxes on the top child adapter of M1 +are locked). Accesses to D3 and D4 are possibly interleaved at +any point, just as is expected for mux-locked muxes. + +When D3 or D4 are accessed, everything else is locked out. For D3 +accesses, M1 locks the root adapter. For D4 accesses, the root +adapter is locked directly. + + +Two mux-locked sibling muxes +---------------------------- + +This is a good topology. + + .--------. + .----------. .--| dev D1 | + | mux- |--' '--------' + .--| locked | .--------. + | | mux M1 |-----| dev D2 | + | '----------' '--------' + | .----------. .--------. + .--------. | | mux- |-----| dev D3 | + | root |--+--| locked | '--------' + '--------' | | mux M2 |--. .--------. + | '----------' '--| dev D4 | + | .--------. '--------' + '--| dev D5 | + '--------' + +When D1 is accessed, accesses to D2, D3 and D4 are locked out. But +accesses to D5 may be interleaved at any time. + + +Two parent-locked sibling muxes +------------------------------- + +This is a good topology. + + .--------. + .----------. .--| dev D1 | + | parent- |--' '--------' + .--| locked | .--------. + | | mux M1 |-----| dev D2 | + | '----------' '--------' + | .----------. .--------. + .--------. | | parent- |-----| dev D3 | + | root |--+--| locked | '--------' + '--------' | | mux M2 |--. .--------. + | '----------' '--| dev D4 | + | .--------. '--------' + '--| dev D5 | + '--------' + +When any device is accessed, accesses to all other devices are locked +out. + + +Mux-locked and parent-locked sibling muxes +------------------------------------------ + +This is a good topology. + + .--------. + .----------. .--| dev D1 | + | mux- |--' '--------' + .--| locked | .--------. + | | mux M1 |-----| dev D2 | + | '----------' '--------' + | .----------. .--------. + .--------. | | parent- |-----| dev D3 | + | root |--+--| locked | '--------' + '--------' | | mux M2 |--. .--------. + | '----------' '--| dev D4 | + | .--------. '--------' + '--| dev D5 | + '--------' + +When D1 or D2 are accessed, accesses to D3 and D4 are locked out while +accesses to D5 may interleave. When D3 or D4 are accessed, accesses to +all other devices are locked out. diff --git a/Documentation/infiniband/ipoib.txt b/Documentation/infiniband/ipoib.txt index f2cfe265e836..47c1dd9818f2 100644 --- a/Documentation/infiniband/ipoib.txt +++ b/Documentation/infiniband/ipoib.txt @@ -25,7 +25,7 @@ Partitions and P_Keys main interface for a subinterface is in "parent." Child interface create/delete can also be done using IPoIB's - rtnl_link_ops, where childs created using either way behave the same. + rtnl_link_ops, where children created using either way behave the same. Datagram vs Connected modes diff --git a/Documentation/isa.txt b/Documentation/isa.txt new file mode 100644 index 000000000000..f232c26a40be --- /dev/null +++ b/Documentation/isa.txt @@ -0,0 +1,121 @@ +ISA Drivers +----------- + +The following text is adapted from the commit message of the initial +commit of the ISA bus driver authored by Rene Herman. + +During the recent "isa drivers using platform devices" discussion it was +pointed out that (ALSA) ISA drivers ran into the problem of not having +the option to fail driver load (device registration rather) upon not +finding their hardware due to a probe() error not being passed up +through the driver model. In the course of that, I suggested a separate +ISA bus might be best; Russell King agreed and suggested this bus could +use the .match() method for the actual device discovery. + +The attached does this. For this old non (generically) discoverable ISA +hardware only the driver itself can do discovery so as a difference with +the platform_bus, this isa_bus also distributes match() up to the +driver. + +As another difference: these devices only exist in the driver model due +to the driver creating them because it might want to drive them, meaning +that all device creation has been made internal as well. + +The usage model this provides is nice, and has been acked from the ALSA +side by Takashi Iwai and Jaroslav Kysela. The ALSA driver module_init's +now (for oldisa-only drivers) become: + +static int __init alsa_card_foo_init(void) +{ + return isa_register_driver(&snd_foo_isa_driver, SNDRV_CARDS); +} + +static void __exit alsa_card_foo_exit(void) +{ + isa_unregister_driver(&snd_foo_isa_driver); +} + +Quite like the other bus models therefore. This removes a lot of +duplicated init code from the ALSA ISA drivers. + +The passed in isa_driver struct is the regular driver struct embedding a +struct device_driver, the normal probe/remove/shutdown/suspend/resume +callbacks, and as indicated that .match callback. + +The "SNDRV_CARDS" you see being passed in is a "unsigned int ndev" +parameter, indicating how many devices to create and call our methods +with. + +The platform_driver callbacks are called with a platform_device param; +the isa_driver callbacks are being called with a "struct device *dev, +unsigned int id" pair directly -- with the device creation completely +internal to the bus it's much cleaner to not leak isa_dev's by passing +them in at all. The id is the only thing we ever want other then the +struct device * anyways, and it makes for nicer code in the callbacks as +well. + +With this additional .match() callback ISA drivers have all options. If +ALSA would want to keep the old non-load behaviour, it could stick all +of the old .probe in .match, which would only keep them registered after +everything was found to be present and accounted for. If it wanted the +behaviour of always loading as it inadvertently did for a bit after the +changeover to platform devices, it could just not provide a .match() and +do everything in .probe() as before. + +If it, as Takashi Iwai already suggested earlier as a way of following +the model from saner buses more closely, wants to load when a later bind +could conceivably succeed, it could use .match() for the prerequisites +(such as checking the user wants the card enabled and that port/irq/dma +values have been passed in) and .probe() for everything else. This is +the nicest model. + +To the code... + +This exports only two functions; isa_{,un}register_driver(). + +isa_register_driver() register's the struct device_driver, and then +loops over the passed in ndev creating devices and registering them. +This causes the bus match method to be called for them, which is: + +int isa_bus_match(struct device *dev, struct device_driver *driver) +{ + struct isa_driver *isa_driver = to_isa_driver(driver); + + if (dev->platform_data == isa_driver) { + if (!isa_driver->match || + isa_driver->match(dev, to_isa_dev(dev)->id)) + return 1; + dev->platform_data = NULL; + } + return 0; +} + +The first thing this does is check if this device is in fact one of this +driver's devices by seeing if the device's platform_data pointer is set +to this driver. Platform devices compare strings, but we don't need to +do that with everything being internal, so isa_register_driver() abuses +dev->platform_data as a isa_driver pointer which we can then check here. +I believe platform_data is available for this, but if rather not, moving +the isa_driver pointer to the private struct isa_dev is ofcourse fine as +well. + +Then, if the the driver did not provide a .match, it matches. If it did, +the driver match() method is called to determine a match. + +If it did _not_ match, dev->platform_data is reset to indicate this to +isa_register_driver which can then unregister the device again. + +If during all this, there's any error, or no devices matched at all +everything is backed out again and the error, or -ENODEV, is returned. + +isa_unregister_driver() just unregisters the matched devices and the +driver itself. + +module_isa_driver is a helper macro for ISA drivers which do not do +anything special in module init/exit. This eliminates a lot of +boilerplate code. Each module may only use this macro once, and calling +it replaces module_init and module_exit. + +max_num_isa_dev is a macro to determine the maximum possible number of +ISA devices which may be registered in the I/O port address space given +the address extent of the ISA devices. diff --git a/Documentation/ja_JP/HOWTO b/Documentation/ja_JP/HOWTO index 52ef02b33da9..581c14bdd7be 100644 --- a/Documentation/ja_JP/HOWTO +++ b/Documentation/ja_JP/HOWTO @@ -290,12 +290,6 @@ Linux カーネルの開発プロセスは現在幾つかの異なるメイン - このプロセスはカーネルが 「準備ができた」と考えられるまで継続しま す。このプロセスはだいたい 6週間継続します。 - - 各リリースでの既知の後戻り問題(regression: このリリースの中で新規 - に作り込まれた問題を指す) はその都度 Linux-kernel メーリングリスト - に投稿されます。ゴールとしては、カーネルが 「準備ができた」と宣言 - する前にこのリストの長さをゼロに減らすことですが、現実には、数個の - 後戻り問題がリリース時にたびたび残ってしまいます。 - Andrew Morton が Linux-kernel メーリングリストにカーネルリリースについ て書いたことをここで言っておくことは価値があります- 「カーネルがいつリリースされるかは誰も知りません。なぜなら、これは現 diff --git a/Documentation/kdump/gdbmacros.txt b/Documentation/kdump/gdbmacros.txt index 9b9b454b048a..35f6a982a0d5 100644 --- a/Documentation/kdump/gdbmacros.txt +++ b/Documentation/kdump/gdbmacros.txt @@ -15,15 +15,16 @@ define bttnobp set $tasks_off=((size_t)&((struct task_struct *)0)->tasks) - set $pid_off=((size_t)&((struct task_struct *)0)->pids[1].pid_list.next) + set $pid_off=((size_t)&((struct task_struct *)0)->thread_group.next) set $init_t=&init_task set $next_t=(((char *)($init_t->tasks).next) - $tasks_off) + set var $stacksize = sizeof(union thread_union) while ($next_t != $init_t) set $next_t=(struct task_struct *)$next_t printf "\npid %d; comm %s:\n", $next_t.pid, $next_t.comm printf "===================\n" - set var $stackp = $next_t.thread.esp - set var $stack_top = ($stackp & ~4095) + 4096 + set var $stackp = $next_t.thread.sp + set var $stack_top = ($stackp & ~($stacksize - 1)) + $stacksize while ($stackp < $stack_top) if (*($stackp) > _stext && *($stackp) < _sinittext) @@ -31,13 +32,13 @@ define bttnobp end set $stackp += 4 end - set $next_th=(((char *)$next_t->pids[1].pid_list.next) - $pid_off) + set $next_th=(((char *)$next_t->thread_group.next) - $pid_off) while ($next_th != $next_t) set $next_th=(struct task_struct *)$next_th printf "\npid %d; comm %s:\n", $next_t.pid, $next_t.comm printf "===================\n" - set var $stackp = $next_t.thread.esp - set var $stack_top = ($stackp & ~4095) + 4096 + set var $stackp = $next_t.thread.sp + set var $stack_top = ($stackp & ~($stacksize - 1)) + stacksize while ($stackp < $stack_top) if (*($stackp) > _stext && *($stackp) < _sinittext) @@ -45,7 +46,7 @@ define bttnobp end set $stackp += 4 end - set $next_th=(((char *)$next_th->pids[1].pid_list.next) - $pid_off) + set $next_th=(((char *)$next_th->thread_group.next) - $pid_off) end set $next_t=(char *)($next_t->tasks.next) - $tasks_off end @@ -54,42 +55,44 @@ document bttnobp dump all thread stack traces on a kernel compiled with !CONFIG_FRAME_POINTER end +define btthreadstack + set var $pid_task = $arg0 + + printf "\npid %d; comm %s:\n", $pid_task.pid, $pid_task.comm + printf "task struct: " + print $pid_task + printf "===================\n" + set var $stackp = $pid_task.thread.sp + set var $stacksize = sizeof(union thread_union) + set var $stack_top = ($stackp & ~($stacksize - 1)) + $stacksize + set var $stack_bot = ($stackp & ~($stacksize - 1)) + + set $stackp = *((unsigned long *) $stackp) + while (($stackp < $stack_top) && ($stackp > $stack_bot)) + set var $addr = *(((unsigned long *) $stackp) + 1) + info symbol $addr + set $stackp = *((unsigned long *) $stackp) + end +end +document btthreadstack + dump a thread stack using the given task structure pointer +end + + define btt set $tasks_off=((size_t)&((struct task_struct *)0)->tasks) - set $pid_off=((size_t)&((struct task_struct *)0)->pids[1].pid_list.next) + set $pid_off=((size_t)&((struct task_struct *)0)->thread_group.next) set $init_t=&init_task set $next_t=(((char *)($init_t->tasks).next) - $tasks_off) while ($next_t != $init_t) set $next_t=(struct task_struct *)$next_t - printf "\npid %d; comm %s:\n", $next_t.pid, $next_t.comm - printf "===================\n" - set var $stackp = $next_t.thread.esp - set var $stack_top = ($stackp & ~4095) + 4096 - set var $stack_bot = ($stackp & ~4095) - - set $stackp = *($stackp) - while (($stackp < $stack_top) && ($stackp > $stack_bot)) - set var $addr = *($stackp + 4) - info symbol $addr - set $stackp = *($stackp) - end + btthreadstack $next_t - set $next_th=(((char *)$next_t->pids[1].pid_list.next) - $pid_off) + set $next_th=(((char *)$next_t->thread_group.next) - $pid_off) while ($next_th != $next_t) set $next_th=(struct task_struct *)$next_th - printf "\npid %d; comm %s:\n", $next_t.pid, $next_t.comm - printf "===================\n" - set var $stackp = $next_t.thread.esp - set var $stack_top = ($stackp & ~4095) + 4096 - set var $stack_bot = ($stackp & ~4095) - - set $stackp = *($stackp) - while (($stackp < $stack_top) && ($stackp > $stack_bot)) - set var $addr = *($stackp + 4) - info symbol $addr - set $stackp = *($stackp) - end - set $next_th=(((char *)$next_th->pids[1].pid_list.next) - $pid_off) + btthreadstack $next_th + set $next_th=(((char *)$next_th->thread_group.next) - $pid_off) end set $next_t=(char *)($next_t->tasks.next) - $tasks_off end @@ -101,7 +104,7 @@ end define btpid set var $pid = $arg0 set $tasks_off=((size_t)&((struct task_struct *)0)->tasks) - set $pid_off=((size_t)&((struct task_struct *)0)->pids[1].pid_list.next) + set $pid_off=((size_t)&((struct task_struct *)0)->thread_group.next) set $init_t=&init_task set $next_t=(((char *)($init_t->tasks).next) - $tasks_off) set var $pid_task = 0 @@ -113,29 +116,18 @@ define btpid set $pid_task = $next_t end - set $next_th=(((char *)$next_t->pids[1].pid_list.next) - $pid_off) + set $next_th=(((char *)$next_t->thread_group.next) - $pid_off) while ($next_th != $next_t) set $next_th=(struct task_struct *)$next_th if ($next_th.pid == $pid) set $pid_task = $next_th end - set $next_th=(((char *)$next_th->pids[1].pid_list.next) - $pid_off) + set $next_th=(((char *)$next_th->thread_group.next) - $pid_off) end set $next_t=(char *)($next_t->tasks.next) - $tasks_off end - printf "\npid %d; comm %s:\n", $pid_task.pid, $pid_task.comm - printf "===================\n" - set var $stackp = $pid_task.thread.esp - set var $stack_top = ($stackp & ~4095) + 4096 - set var $stack_bot = ($stackp & ~4095) - - set $stackp = *($stackp) - while (($stackp < $stack_top) && ($stackp > $stack_bot)) - set var $addr = *($stackp + 4) - info symbol $addr - set $stackp = *($stackp) - end + btthreadstack $pid_task end document btpid backtrace of pid @@ -145,7 +137,7 @@ end define trapinfo set var $pid = $arg0 set $tasks_off=((size_t)&((struct task_struct *)0)->tasks) - set $pid_off=((size_t)&((struct task_struct *)0)->pids[1].pid_list.next) + set $pid_off=((size_t)&((struct task_struct *)0)->thread_group.next) set $init_t=&init_task set $next_t=(((char *)($init_t->tasks).next) - $tasks_off) set var $pid_task = 0 @@ -157,13 +149,13 @@ define trapinfo set $pid_task = $next_t end - set $next_th=(((char *)$next_t->pids[1].pid_list.next) - $pid_off) + set $next_th=(((char *)$next_t->thread_group.next) - $pid_off) while ($next_th != $next_t) set $next_th=(struct task_struct *)$next_th if ($next_th.pid == $pid) set $pid_task = $next_th end - set $next_th=(((char *)$next_th->pids[1].pid_list.next) - $pid_off) + set $next_th=(((char *)$next_th->thread_group.next) - $pid_off) end set $next_t=(char *)($next_t->tasks.next) - $tasks_off end diff --git a/Documentation/kdump/kdump.txt b/Documentation/kdump/kdump.txt index bc4bd5a44b88..88ff63d5fde3 100644 --- a/Documentation/kdump/kdump.txt +++ b/Documentation/kdump/kdump.txt @@ -263,12 +263,6 @@ The syntax is: crashkernel=<range1>:<size1>[,<range2>:<size2>,...][@offset] range=start-[end] -Please note, on arm, the offset is required. - crashkernel=<range1>:<size1>[,<range2>:<size2>,...]@offset - range=start-[end] - - 'start' is inclusive and 'end' is exclusive. - For example: crashkernel=512M-2G:64M,2G-:128M @@ -307,10 +301,9 @@ Boot into System Kernel on the memory consumption of the kdump system. In general this is not dependent on the memory size of the production system. - On arm, use "crashkernel=Y@X". Note that the start address of the kernel - will be aligned to 128MiB (0x08000000), so if the start address is not then - any space below the alignment point may be overwritten by the dump-capture kernel, - which means it is possible that the vmcore is not that precise as expected. + On arm, the use of "crashkernel=Y@X" is no longer necessary; the + kernel will automatically locate the crash kernel image within the + first 512MB of RAM if X is not given. Load the Dump-capture Kernel diff --git a/Documentation/kernel-docs.txt b/Documentation/kernel-docs.txt index fe217c1c2f7f..1dafc52167b0 100644 --- a/Documentation/kernel-docs.txt +++ b/Documentation/kernel-docs.txt @@ -194,15 +194,15 @@ simple---most of the complexity (other than talking to the hardware) involves managing network packets in memory". - * Title: "Writing Linux Device Drivers" + * Title: "Linux Kernel Hackers' Guide" Author: Michael K. Johnson. - URL: http://users.evitech.fi/~tk/rtos/writing_linux_device_d.html - Keywords: files, VFS, file operations, kernel interface, character - vs block devices, I/O access, hardware interrupts, DMA, access to - user memory, memory allocation, timers. - Description: Introductory 50-minutes (sic) tutorial on writing - device drivers. 12 pages written by the same author of the "Kernel - Hackers' Guide" which give a very good overview of the topic. + URL: http://www.tldp.org/LDP/khg/HyperNews/get/khg.html + Keywords: device drivers, files, VFS, kernel interface, character vs + block devices, hardware interrupts, scsi, DMA, access to user memory, + memory allocation, timers. + Description: A guide designed to help you get up to speed on the + concepts that are not intuitevly obvious, and to document the internal + structures of Linux. * Title: "The Venus kernel interface" Author: Peter J. Braam. @@ -250,7 +250,7 @@ * Title: "Analysis of the Ext2fs structure" Author: Louis-Dominique Dubeau. - URL: http://www.nondot.org/sabre/os/files/FileSystems/ext2fs/ + URL: http://teaching.csse.uwa.edu.au/units/CITS2002/fs-ext2/ Keywords: ext2, filesystem, ext2fs. Description: Description of ext2's blocks, directories, inodes, bitmaps, invariants... @@ -266,14 +266,14 @@ * Title: "Kernel API changes from 2.0 to 2.2" Author: Richard Gooch. - URL: - http://www.linuxhq.com/guides/LKMPG/node28.html + URL: http://www.safe-mbox.com/~rgooch/linux/docs/porting-to-2.2.html Keywords: 2.2, changes. Description: Kernel functions/structures/variables which changed from 2.0.x to 2.2.x. * Title: "Kernel API changes from 2.2 to 2.4" Author: Richard Gooch. + URL: http://www.safe-mbox.com/~rgooch/linux/docs/porting-to-2.4.html Keywords: 2.4, changes. Description: Kernel functions/structures/variables which changed from 2.2.x to 2.4.x. @@ -609,6 +609,13 @@ Pages: 432. ISBN: 0-201-63338-8 + * Title: "Linux Kernel Development, 3rd Edition" + Author: Robert Love + Publisher: Addison-Wesley. + Date: July, 2010 + Pages: 440 + ISBN: 978-0672329463 + MISCELLANEOUS: * Name: linux/Documentation diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 0b3de80ec8f6..82b42c958d1c 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -131,6 +131,7 @@ parameter is applicable: More X86-64 boot options can be found in Documentation/x86/x86_64/boot-options.txt . X86 Either 32-bit or 64-bit x86 (same as X86-32+X86-64) + X86_UV SGI UV support is enabled. XEN Xen support is enabled In addition, the following text indicates that the option: @@ -167,16 +168,18 @@ bytes respectively. Such letter suffixes can also be entirely omitted. acpi= [HW,ACPI,X86,ARM64] Advanced Configuration and Power Interface - Format: { force | off | strict | noirq | rsdt | + Format: { force | on | off | strict | noirq | rsdt | copy_dsdt } force -- enable ACPI if default was off + on -- enable ACPI but allow fallback to DT [arm64] off -- disable ACPI if default was on noirq -- do not use ACPI for IRQ routing strict -- Be less tolerant of platforms that are not strictly ACPI specification compliant. rsdt -- prefer RSDT over (default) XSDT copy_dsdt -- copy DSDT to memory - For ARM64, ONLY "acpi=off" or "acpi=force" are available + For ARM64, ONLY "acpi=off", "acpi=on" or "acpi=force" + are available See also Documentation/power/runtime_pm.txt, pci=noacpi @@ -312,6 +315,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted. acpi_osi=!* # remove all strings acpi_osi=! # disable all built-in OS vendor strings + acpi_osi=!! # enable all built-in OS vendor + strings acpi_osi= # disable all strings 'acpi_osi=!' can be used in combination with single or @@ -542,6 +547,13 @@ bytes respectively. Such letter suffixes can also be entirely omitted. Format: <int> (must be >=0) Default: 64 + bau= [X86_UV] Enable the BAU on SGI UV. The default + behavior is to disable the BAU (i.e. bau=0). + Format: { "0" | "1" } + 0 - Disable the BAU. + 1 - Enable the BAU. + unset - Disable the BAU. + baycom_epp= [HW,AX25] Format: <io>,<mode> @@ -826,6 +838,9 @@ bytes respectively. Such letter suffixes can also be entirely omitted. It will be ignored when crashkernel=X,high is not used or memory reserved is below 4G. + cryptomgr.notests + [KNL] Disable crypto self-tests + cs89x0_dma= [HW,NET] Format: <dma> @@ -1039,6 +1054,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted. the driver will use only 32-bit accessors to read/write the device registers. + meson,<addr> + Start an early, polled-mode console on a meson serial + port at the specified address. The serial port must + already be setup and configured. Options are not yet + supported. + msm_serial,<addr> Start an early, polled-mode console on an msm serial port at the specified address. The serial port @@ -1661,6 +1682,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted. hwp_only Only load intel_pstate on systems which support hardware P state control (HWP) if available. + support_acpi_ppc + Enforce ACPI _PPC performance limits. If the Fixed ACPI + Description Table, specifies preferred power management + profile as "Enterprise Server" or "Performance Server", + then this feature is turned on by default. intremap= [X86-64, Intel-IOMMU] on enable Interrupt Remapping (default) @@ -1767,6 +1793,13 @@ bytes respectively. Such letter suffixes can also be entirely omitted. PCI device 00:14.0 write the parameter as: ivrs_hpet[0]=00:14.0 + ivrs_acpihid [HW,X86_64] + Provide an override to the ACPI-HID:UID<->DEVICE-ID + mapping provided in the IVRS ACPI table. For + example, to map UART-HID:UID AMD0020:0 to + PCI device 00:14.5 write the parameter as: + ivrs_acpihid[00:14.5]=AMD0020:0 + js= [HW,JOY] Analog joystick See Documentation/input/joystick.txt. @@ -2141,6 +2174,14 @@ bytes respectively. Such letter suffixes can also be entirely omitted. [KNL,SH] Allow user to override the default size for per-device physically contiguous DMA buffers. + memhp_default_state=online/offline + [KNL] Set the initial state for the memory hotplug + onlining policy. If not specified, the default value is + set according to the + CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE kernel config + option. + See Documentation/memory-hotplug.txt. + memmap=exactmap [KNL,X86] Enable setting of an exact E820 memory map, as specified by the user. Such memmap=exactmap lines can be constructed based on @@ -2538,6 +2579,9 @@ bytes respectively. Such letter suffixes can also be entirely omitted. nohugeiomap [KNL,x86] Disable kernel huge I/O mappings. + nosmt [KNL,S390] Disable symmetric multithreading (SMT). + Equivalent to smt=1. + noxsave [BUGS=X86] Disables x86 extended register state save and restore using xsave. The kernel will fallback to enabling legacy floating-point and sse state. @@ -2921,11 +2965,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted. for broken drivers that don't call it. skip_isa_align [X86] do not align io start addr, so can handle more pci cards - firmware [ARM] Do not re-enumerate the bus but instead - just use the configuration from the - bootloader. This is currently used on - IXP2000 systems where the bus has to be - configured a certain way for adjunct CPUs. noearly [X86] Don't do any early type 1 scanning. This might help on some broken boards which machine check when some devices' config space @@ -3284,6 +3323,44 @@ bytes respectively. Such letter suffixes can also be entirely omitted. Lazy RCU callbacks are those which RCU can prove do nothing more than free memory. + rcuperf.gp_exp= [KNL] + Measure performance of expedited synchronous + grace-period primitives. + + rcuperf.holdoff= [KNL] + Set test-start holdoff period. The purpose of + this parameter is to delay the start of the + test until boot completes in order to avoid + interference. + + rcuperf.nreaders= [KNL] + Set number of RCU readers. The value -1 selects + N, where N is the number of CPUs. A value + "n" less than -1 selects N-n+1, where N is again + the number of CPUs. For example, -2 selects N + (the number of CPUs), -3 selects N+1, and so on. + A value of "n" less than or equal to -N selects + a single reader. + + rcuperf.nwriters= [KNL] + Set number of RCU writers. The values operate + the same as for rcuperf.nreaders. + N, where N is the number of CPUs + + rcuperf.perf_runnable= [BOOT] + Start rcuperf running at boot time. + + rcuperf.shutdown= [KNL] + Shut the system down after performance tests + complete. This is useful for hands-off automated + testing. + + rcuperf.perf_type= [KNL] + Specify the RCU implementation to test. + + rcuperf.verbose= [KNL] + Enable additional printk() statements. + rcutorture.cbflood_inter_holdoff= [KNL] Set holdoff time (jiffies) between successive callback-flood tests. @@ -3695,6 +3772,13 @@ bytes respectively. Such letter suffixes can also be entirely omitted. 1: Fast pin select (default) 2: ATC IRMode + smt [KNL,S390] Set the maximum number of threads (logical + CPUs) to use per physical CPU on systems capable of + symmetric multithreading (SMT). Will be capped to the + actual hardware limit. + Format: <integer> + Default: -1 (no limit) + softlockup_panic= [KNL] Should the soft-lockup detector generate panics. Format: <integer> diff --git a/Documentation/ko_KR/HOWTO b/Documentation/ko_KR/HOWTO index 5a81b394b3b5..9a3e65924d54 100644 --- a/Documentation/ko_KR/HOWTO +++ b/Documentation/ko_KR/HOWTO @@ -236,9 +236,9 @@ Documentation/DocBook/ 디렉토리 내에서 만들어지며 PDF, Postscript, H - 새로운 커널이 배포되자마자 2주의 시간이 주어진다. 이 기간동은 메인테이너들은 큰 diff들을 Linus에게 제출할 수 있다. 대개 이 패치들은 몇 주 동안 -next 커널내에 이미 있었던 것들이다. 큰 변경들을 제출하는 데 - 선호되는 방법은 git(커널의 소스 관리 툴, 더 많은 정보들은 http://git.or.cz/ - 에서 참조할 수 있다)를 사용하는 것이지만 순수한 패치파일의 형식으로 보내는 - 것도 무관하다. + 선호되는 방법은 git(커널의 소스 관리 툴, 더 많은 정보들은 + http://git-scm.com/ 에서 참조할 수 있다)를 사용하는 것이지만 순수한 + 패치파일의 형식으로 보내는 것도 무관하다. - 2주 후에 -rc1 커널이 배포되며 지금부터는 전체 커널의 안정성에 영향을 미칠수 있는 새로운 기능들을 포함하지 않는 패치들만이 추가될 수 있다. 완전히 새로운 드라이버(혹은 파일시스템)는 -rc1 이후에만 받아들여진다는 @@ -253,8 +253,6 @@ Documentation/DocBook/ 디렉토리 내에서 만들어지며 PDF, Postscript, H 것이다. - 이러한 프로세스는 커널이 "준비(ready)"되었다고 여겨질때까지 계속된다. 프로세스는 대체로 6주간 지속된다. - - 각 -rc 배포에 있는 알려진 회귀의 목록들은 다음 URI에 남겨진다. - http://kernelnewbies.org/known_regressions 커널 배포에 있어서 언급할만한 가치가 있는 리눅스 커널 메일링 리스트의 Andrew Morton의 글이 있다. diff --git a/Documentation/laptops/toshiba_haps.txt b/Documentation/laptops/toshiba_haps.txt index 11dbcfdc9e7a..0c1d88dedbde 100644 --- a/Documentation/laptops/toshiba_haps.txt +++ b/Documentation/laptops/toshiba_haps.txt @@ -19,7 +19,7 @@ Author: Azael Avalos <coproscefalo@gmail.com> -------------- This driver provides support for the accelerometer found in various Toshiba -laptops, being called "Toshiba HDD Protection - Shock Sensor" officialy, +laptops, being called "Toshiba HDD Protection - Shock Sensor" officially, and detects laptops automatically with this device. On Windows, Toshiba provided software monitors this device and provides automatic HDD protection (head unload) on sudden moves or harsh vibrations, diff --git a/Documentation/livepatch/livepatch.txt b/Documentation/livepatch/livepatch.txt new file mode 100644 index 000000000000..6c43f6ebee8d --- /dev/null +++ b/Documentation/livepatch/livepatch.txt @@ -0,0 +1,394 @@ +========= +Livepatch +========= + +This document outlines basic information about kernel livepatching. + +Table of Contents: + +1. Motivation +2. Kprobes, Ftrace, Livepatching +3. Consistency model +4. Livepatch module + 4.1. New functions + 4.2. Metadata + 4.3. Livepatch module handling +5. Livepatch life-cycle + 5.1. Registration + 5.2. Enabling + 5.3. Disabling + 5.4. Unregistration +6. Sysfs +7. Limitations + + +1. Motivation +============= + +There are many situations where users are reluctant to reboot a system. It may +be because their system is performing complex scientific computations or under +heavy load during peak usage. In addition to keeping systems up and running, +users want to also have a stable and secure system. Livepatching gives users +both by allowing for function calls to be redirected; thus, fixing critical +functions without a system reboot. + + +2. Kprobes, Ftrace, Livepatching +================================ + +There are multiple mechanisms in the Linux kernel that are directly related +to redirection of code execution; namely: kernel probes, function tracing, +and livepatching: + + + The kernel probes are the most generic. The code can be redirected by + putting a breakpoint instruction instead of any instruction. + + + The function tracer calls the code from a predefined location that is + close to the function entry point. This location is generated by the + compiler using the '-pg' gcc option. + + + Livepatching typically needs to redirect the code at the very beginning + of the function entry before the function parameters or the stack + are in any way modified. + +All three approaches need to modify the existing code at runtime. Therefore +they need to be aware of each other and not step over each other's toes. +Most of these problems are solved by using the dynamic ftrace framework as +a base. A Kprobe is registered as a ftrace handler when the function entry +is probed, see CONFIG_KPROBES_ON_FTRACE. Also an alternative function from +a live patch is called with the help of a custom ftrace handler. But there are +some limitations, see below. + + +3. Consistency model +==================== + +Functions are there for a reason. They take some input parameters, get or +release locks, read, process, and even write some data in a defined way, +have return values. In other words, each function has a defined semantic. + +Many fixes do not change the semantic of the modified functions. For +example, they add a NULL pointer or a boundary check, fix a race by adding +a missing memory barrier, or add some locking around a critical section. +Most of these changes are self contained and the function presents itself +the same way to the rest of the system. In this case, the functions might +be updated independently one by one. + +But there are more complex fixes. For example, a patch might change +ordering of locking in multiple functions at the same time. Or a patch +might exchange meaning of some temporary structures and update +all the relevant functions. In this case, the affected unit +(thread, whole kernel) need to start using all new versions of +the functions at the same time. Also the switch must happen only +when it is safe to do so, e.g. when the affected locks are released +or no data are stored in the modified structures at the moment. + +The theory about how to apply functions a safe way is rather complex. +The aim is to define a so-called consistency model. It attempts to define +conditions when the new implementation could be used so that the system +stays consistent. The theory is not yet finished. See the discussion at +http://thread.gmane.org/gmane.linux.kernel/1823033/focus=1828189 + +The current consistency model is very simple. It guarantees that either +the old or the new function is called. But various functions get redirected +one by one without any synchronization. + +In other words, the current implementation _never_ modifies the behavior +in the middle of the call. It is because it does _not_ rewrite the entire +function in the memory. Instead, the function gets redirected at the +very beginning. But this redirection is used immediately even when +some other functions from the same patch have not been redirected yet. + +See also the section "Limitations" below. + + +4. Livepatch module +=================== + +Livepatches are distributed using kernel modules, see +samples/livepatch/livepatch-sample.c. + +The module includes a new implementation of functions that we want +to replace. In addition, it defines some structures describing the +relation between the original and the new implementation. Then there +is code that makes the kernel start using the new code when the livepatch +module is loaded. Also there is code that cleans up before the +livepatch module is removed. All this is explained in more details in +the next sections. + + +4.1. New functions +------------------ + +New versions of functions are typically just copied from the original +sources. A good practice is to add a prefix to the names so that they +can be distinguished from the original ones, e.g. in a backtrace. Also +they can be declared as static because they are not called directly +and do not need the global visibility. + +The patch contains only functions that are really modified. But they +might want to access functions or data from the original source file +that may only be locally accessible. This can be solved by a special +relocation section in the generated livepatch module, see +Documentation/livepatch/module-elf-format.txt for more details. + + +4.2. Metadata +------------ + +The patch is described by several structures that split the information +into three levels: + + + struct klp_func is defined for each patched function. It describes + the relation between the original and the new implementation of a + particular function. + + The structure includes the name, as a string, of the original function. + The function address is found via kallsyms at runtime. + + Then it includes the address of the new function. It is defined + directly by assigning the function pointer. Note that the new + function is typically defined in the same source file. + + As an optional parameter, the symbol position in the kallsyms database can + be used to disambiguate functions of the same name. This is not the + absolute position in the database, but rather the order it has been found + only for a particular object ( vmlinux or a kernel module ). Note that + kallsyms allows for searching symbols according to the object name. + + + struct klp_object defines an array of patched functions (struct + klp_func) in the same object. Where the object is either vmlinux + (NULL) or a module name. + + The structure helps to group and handle functions for each object + together. Note that patched modules might be loaded later than + the patch itself and the relevant functions might be patched + only when they are available. + + + + struct klp_patch defines an array of patched objects (struct + klp_object). + + This structure handles all patched functions consistently and eventually, + synchronously. The whole patch is applied only when all patched + symbols are found. The only exception are symbols from objects + (kernel modules) that have not been loaded yet. Also if a more complex + consistency model is supported then a selected unit (thread, + kernel as a whole) will see the new code from the entire patch + only when it is in a safe state. + + +4.3. Livepatch module handling +------------------------------ + +The usual behavior is that the new functions will get used when +the livepatch module is loaded. For this, the module init() function +has to register the patch (struct klp_patch) and enable it. See the +section "Livepatch life-cycle" below for more details about these +two operations. + +Module removal is only safe when there are no users of the underlying +functions. The immediate consistency model is not able to detect this; +therefore livepatch modules cannot be removed. See "Limitations" below. + +5. Livepatch life-cycle +======================= + +Livepatching defines four basic operations that define the life cycle of each +live patch: registration, enabling, disabling and unregistration. There are +several reasons why it is done this way. + +First, the patch is applied only when all patched symbols for already +loaded objects are found. The error handling is much easier if this +check is done before particular functions get redirected. + +Second, the immediate consistency model does not guarantee that anyone is not +sleeping in the new code after the patch is reverted. This means that the new +code needs to stay around "forever". If the code is there, one could apply it +again. Therefore it makes sense to separate the operations that might be done +once and those that need to be repeated when the patch is enabled (applied) +again. + +Third, it might take some time until the entire system is migrated +when a more complex consistency model is used. The patch revert might +block the livepatch module removal for too long. Therefore it is useful +to revert the patch using a separate operation that might be called +explicitly. But it does not make sense to remove all information +until the livepatch module is really removed. + + +5.1. Registration +----------------- + +Each patch first has to be registered using klp_register_patch(). This makes +the patch known to the livepatch framework. Also it does some preliminary +computing and checks. + +In particular, the patch is added into the list of known patches. The +addresses of the patched functions are found according to their names. +The special relocations, mentioned in the section "New functions", are +applied. The relevant entries are created under +/sys/kernel/livepatch/<name>. The patch is rejected when any operation +fails. + + +5.2. Enabling +------------- + +Registered patches might be enabled either by calling klp_enable_patch() or +by writing '1' to /sys/kernel/livepatch/<name>/enabled. The system will +start using the new implementation of the patched functions at this stage. + +In particular, if an original function is patched for the first time, a +function specific struct klp_ops is created and an universal ftrace handler +is registered. + +Functions might be patched multiple times. The ftrace handler is registered +only once for the given function. Further patches just add an entry to the +list (see field `func_stack`) of the struct klp_ops. The last added +entry is chosen by the ftrace handler and becomes the active function +replacement. + +Note that the patches might be enabled in a different order than they were +registered. + + +5.3. Disabling +-------------- + +Enabled patches might get disabled either by calling klp_disable_patch() or +by writing '0' to /sys/kernel/livepatch/<name>/enabled. At this stage +either the code from the previously enabled patch or even the original +code gets used. + +Here all the functions (struct klp_func) associated with the to-be-disabled +patch are removed from the corresponding struct klp_ops. The ftrace handler +is unregistered and the struct klp_ops is freed when the func_stack list +becomes empty. + +Patches must be disabled in exactly the reverse order in which they were +enabled. It makes the problem and the implementation much easier. + + +5.4. Unregistration +------------------- + +Disabled patches might be unregistered by calling klp_unregister_patch(). +This can be done only when the patch is disabled and the code is no longer +used. It must be called before the livepatch module gets unloaded. + +At this stage, all the relevant sys-fs entries are removed and the patch +is removed from the list of known patches. + + +6. Sysfs +======== + +Information about the registered patches can be found under +/sys/kernel/livepatch. The patches could be enabled and disabled +by writing there. + +See Documentation/ABI/testing/sysfs-kernel-livepatch for more details. + + +7. Limitations +============== + +The current Livepatch implementation has several limitations: + + + + The patch must not change the semantic of the patched functions. + + The current implementation guarantees only that either the old + or the new function is called. The functions are patched one + by one. It means that the patch must _not_ change the semantic + of the function. + + + + Data structures can not be patched. + + There is no support to version data structures or anyhow migrate + one structure into another. Also the simple consistency model does + not allow to switch more functions atomically. + + Once there is more complex consistency mode, it will be possible to + use some workarounds. For example, it will be possible to use a hole + for a new member because the data structure is aligned. Or it will + be possible to use an existing member for something else. + + There are no plans to add more generic support for modified structures + at the moment. + + + + Only functions that can be traced could be patched. + + Livepatch is based on the dynamic ftrace. In particular, functions + implementing ftrace or the livepatch ftrace handler could not be + patched. Otherwise, the code would end up in an infinite loop. A + potential mistake is prevented by marking the problematic functions + by "notrace". + + + + Anything inlined into __schedule() can not be patched. + + The switch_to macro is inlined into __schedule(). It switches the + context between two processes in the middle of the macro. It does + not save RIP in x86_64 version (contrary to 32-bit version). Instead, + the currently used __schedule()/switch_to() handles both processes. + + Now, let's have two different tasks. One calls the original + __schedule(), its registers are stored in a defined order and it + goes to sleep in the switch_to macro and some other task is restored + using the original __schedule(). Then there is the second task which + calls patched__schedule(), it goes to sleep there and the first task + is picked by the patched__schedule(). Its RSP is restored and now + the registers should be restored as well. But the order is different + in the new patched__schedule(), so... + + There is work in progress to remove this limitation. + + + + Livepatch modules can not be removed. + + The current implementation just redirects the functions at the very + beginning. It does not check if the functions are in use. In other + words, it knows when the functions get called but it does not + know when the functions return. Therefore it can not decide when + the livepatch module can be safely removed. + + This will get most likely solved once a more complex consistency model + is supported. The idea is that a safe state for patching should also + mean a safe state for removing the patch. + + Note that the patch itself might get disabled by writing zero + to /sys/kernel/livepatch/<patch>/enabled. It causes that the new + code will not longer get called. But it does not guarantee + that anyone is not sleeping anywhere in the new code. + + + + Livepatch works reliably only when the dynamic ftrace is located at + the very beginning of the function. + + The function need to be redirected before the stack or the function + parameters are modified in any way. For example, livepatch requires + using -fentry gcc compiler option on x86_64. + + One exception is the PPC port. It uses relative addressing and TOC. + Each function has to handle TOC and save LR before it could call + the ftrace handler. This operation has to be reverted on return. + Fortunately, the generic ftrace code has the same problem and all + this is is handled on the ftrace level. + + + + Kretprobes using the ftrace framework conflict with the patched + functions. + + Both kretprobes and livepatches use a ftrace handler that modifies + the return address. The first user wins. Either the probe or the patch + is rejected when the handler is already in use by the other. + + + + Kprobes in the original function are ignored when the code is + redirected to the new implementation. + + There is a work in progress to add warnings about this situation. diff --git a/Documentation/livepatch/module-elf-format.txt b/Documentation/livepatch/module-elf-format.txt new file mode 100644 index 000000000000..eedbdcf8ba50 --- /dev/null +++ b/Documentation/livepatch/module-elf-format.txt @@ -0,0 +1,311 @@ +=========================== +Livepatch module Elf format +=========================== + +This document outlines the Elf format requirements that livepatch modules must follow. + +----------------- +Table of Contents +----------------- +0. Background and motivation +1. Livepatch modinfo field +2. Livepatch relocation sections + 2.1 What are livepatch relocation sections? + 2.2 Livepatch relocation section format + 2.2.1 Required flags + 2.2.2 Required name format + 2.2.3 Example livepatch relocation section names + 2.2.4 Example `readelf --sections` output + 2.2.5 Example `readelf --relocs` output +3. Livepatch symbols + 3.1 What are livepatch symbols? + 3.2 A livepatch module's symbol table + 3.3 Livepatch symbol format + 3.3.1 Required flags + 3.3.2 Required name format + 3.3.3 Example livepatch symbol names + 3.3.4 Example `readelf --symbols` output +4. Symbol table and Elf section access + +---------------------------- +0. Background and motivation +---------------------------- + +Formerly, livepatch required separate architecture-specific code to write +relocations. However, arch-specific code to write relocations already +exists in the module loader, so this former approach produced redundant +code. So, instead of duplicating code and re-implementing what the module +loader can already do, livepatch leverages existing code in the module +loader to perform the all the arch-specific relocation work. Specifically, +livepatch reuses the apply_relocate_add() function in the module loader to +write relocations. The patch module Elf format described in this document +enables livepatch to be able to do this. The hope is that this will make +livepatch more easily portable to other architectures and reduce the amount +of arch-specific code required to port livepatch to a particular +architecture. + +Since apply_relocate_add() requires access to a module's section header +table, symbol table, and relocation section indices, Elf information is +preserved for livepatch modules (see section 4). Livepatch manages its own +relocation sections and symbols, which are described in this document. The +Elf constants used to mark livepatch symbols and relocation sections were +selected from OS-specific ranges according to the definitions from glibc. + +0.1 Why does livepatch need to write its own relocations? +--------------------------------------------------------- +A typical livepatch module contains patched versions of functions that can +reference non-exported global symbols and non-included local symbols. +Relocations referencing these types of symbols cannot be left in as-is +since the kernel module loader cannot resolve them and will therefore +reject the livepatch module. Furthermore, we cannot apply relocations that +affect modules not yet loaded at patch module load time (e.g. a patch to a +driver that is not loaded). Formerly, livepatch solved this problem by +embedding special "dynrela" (dynamic rela) sections in the resulting patch +module Elf output. Using these dynrela sections, livepatch could resolve +symbols while taking into account its scope and what module the symbol +belongs to, and then manually apply the dynamic relocations. However this +approach required livepatch to supply arch-specific code in order to write +these relocations. In the new format, livepatch manages its own SHT_RELA +relocation sections in place of dynrela sections, and the symbols that the +relas reference are special livepatch symbols (see section 2 and 3). The +arch-specific livepatch relocation code is replaced by a call to +apply_relocate_add(). + +================================ +PATCH MODULE FORMAT REQUIREMENTS +================================ + +-------------------------- +1. Livepatch modinfo field +-------------------------- + +Livepatch modules are required to have the "livepatch" modinfo attribute. +See the sample livepatch module in samples/livepatch/ for how this is done. + +Livepatch modules can be identified by users by using the 'modinfo' command +and looking for the presence of the "livepatch" field. This field is also +used by the kernel module loader to identify livepatch modules. + +Example modinfo output: +----------------------- +% modinfo livepatch-meminfo.ko +filename: livepatch-meminfo.ko +livepatch: Y +license: GPL +depends: +vermagic: 4.3.0+ SMP mod_unload + +-------------------------------- +2. Livepatch relocation sections +-------------------------------- + +------------------------------------------- +2.1 What are livepatch relocation sections? +------------------------------------------- +A livepatch module manages its own Elf relocation sections to apply +relocations to modules as well as to the kernel (vmlinux) at the +appropriate time. For example, if a patch module patches a driver that is +not currently loaded, livepatch will apply the corresponding livepatch +relocation section(s) to the driver once it loads. + +Each "object" (e.g. vmlinux, or a module) within a patch module may have +multiple livepatch relocation sections associated with it (e.g. patches to +multiple functions within the same object). There is a 1-1 correspondence +between a livepatch relocation section and the target section (usually the +text section of a function) to which the relocation(s) apply. It is +also possible for a livepatch module to have no livepatch relocation +sections, as in the case of the sample livepatch module (see +samples/livepatch). + +Since Elf information is preserved for livepatch modules (see Section 4), a +livepatch relocation section can be applied simply by passing in the +appropriate section index to apply_relocate_add(), which then uses it to +access the relocation section and apply the relocations. + +Every symbol referenced by a rela in a livepatch relocation section is a +livepatch symbol. These must be resolved before livepatch can call +apply_relocate_add(). See Section 3 for more information. + +--------------------------------------- +2.2 Livepatch relocation section format +--------------------------------------- + +2.2.1 Required flags +-------------------- +Livepatch relocation sections must be marked with the SHF_RELA_LIVEPATCH +section flag. See include/uapi/linux/elf.h for the definition. The module +loader recognizes this flag and will avoid applying those relocation sections +at patch module load time. These sections must also be marked with SHF_ALLOC, +so that the module loader doesn't discard them on module load (i.e. they will +be copied into memory along with the other SHF_ALLOC sections). + +2.2.2 Required name format +-------------------------- +The name of a livepatch relocation section must conform to the following format: + +.klp.rela.objname.section_name +^ ^^ ^ ^ ^ +|________||_____| |__________| + [A] [B] [C] + +[A] The relocation section name is prefixed with the string ".klp.rela." +[B] The name of the object (i.e. "vmlinux" or name of module) to + which the relocation section belongs follows immediately after the prefix. +[C] The actual name of the section to which this relocation section applies. + +2.2.3 Example livepatch relocation section names: +------------------------------------------------- +.klp.rela.ext4.text.ext4_attr_store +.klp.rela.vmlinux.text.cmdline_proc_show + +2.2.4 Example `readelf --sections` output for a patch +module that patches vmlinux and modules 9p, btrfs, ext4: +-------------------------------------------------------- + Section Headers: + [Nr] Name Type Address Off Size ES Flg Lk Inf Al + [ snip ] + [29] .klp.rela.9p.text.caches.show RELA 0000000000000000 002d58 0000c0 18 AIo 64 9 8 + [30] .klp.rela.btrfs.text.btrfs.feature.attr.show RELA 0000000000000000 002e18 000060 18 AIo 64 11 8 + [ snip ] + [34] .klp.rela.ext4.text.ext4.attr.store RELA 0000000000000000 002fd8 0000d8 18 AIo 64 13 8 + [35] .klp.rela.ext4.text.ext4.attr.show RELA 0000000000000000 0030b0 000150 18 AIo 64 15 8 + [36] .klp.rela.vmlinux.text.cmdline.proc.show RELA 0000000000000000 003200 000018 18 AIo 64 17 8 + [37] .klp.rela.vmlinux.text.meminfo.proc.show RELA 0000000000000000 003218 0000f0 18 AIo 64 19 8 + [ snip ] ^ ^ + | | + [*] [*] +[*] Livepatch relocation sections are SHT_RELA sections but with a few special +characteristics. Notice that they are marked SHF_ALLOC ("A") so that they will +not be discarded when the module is loaded into memory, as well as with the +SHF_RELA_LIVEPATCH flag ("o" - for OS-specific). + +2.2.5 Example `readelf --relocs` output for a patch module: +----------------------------------------------------------- +Relocation section '.klp.rela.btrfs.text.btrfs_feature_attr_show' at offset 0x2ba0 contains 4 entries: + Offset Info Type Symbol's Value Symbol's Name + Addend +000000000000001f 0000005e00000002 R_X86_64_PC32 0000000000000000 .klp.sym.vmlinux.printk,0 - 4 +0000000000000028 0000003d0000000b R_X86_64_32S 0000000000000000 .klp.sym.btrfs.btrfs_ktype,0 + 0 +0000000000000036 0000003b00000002 R_X86_64_PC32 0000000000000000 .klp.sym.btrfs.can_modify_feature.isra.3,0 - 4 +000000000000004c 0000004900000002 R_X86_64_PC32 0000000000000000 .klp.sym.vmlinux.snprintf,0 - 4 +[ snip ] ^ + | + [*] +[*] Every symbol referenced by a relocation is a livepatch symbol. + +-------------------- +3. Livepatch symbols +-------------------- + +------------------------------- +3.1 What are livepatch symbols? +------------------------------- +Livepatch symbols are symbols referred to by livepatch relocation sections. +These are symbols accessed from new versions of functions for patched +objects, whose addresses cannot be resolved by the module loader (because +they are local or unexported global syms). Since the module loader only +resolves exported syms, and not every symbol referenced by the new patched +functions is exported, livepatch symbols were introduced. They are used +also in cases where we cannot immediately know the address of a symbol when +a patch module loads. For example, this is the case when livepatch patches +a module that is not loaded yet. In this case, the relevant livepatch +symbols are resolved simply when the target module loads. In any case, for +any livepatch relocation section, all livepatch symbols referenced by that +section must be resolved before livepatch can call apply_relocate_add() for +that reloc section. + +Livepatch symbols must be marked with SHN_LIVEPATCH so that the module +loader can identify and ignore them. Livepatch modules keep these symbols +in their symbol tables, and the symbol table is made accessible through +module->symtab. + +------------------------------------- +3.2 A livepatch module's symbol table +------------------------------------- +Normally, a stripped down copy of a module's symbol table (containing only +"core" symbols) is made available through module->symtab (See layout_symtab() +in kernel/module.c). For livepatch modules, the symbol table copied into memory +on module load must be exactly the same as the symbol table produced when the +patch module was compiled. This is because the relocations in each livepatch +relocation section refer to their respective symbols with their symbol indices, +and the original symbol indices (and thus the symtab ordering) must be +preserved in order for apply_relocate_add() to find the right symbol. + +For example, take this particular rela from a livepatch module: +Relocation section '.klp.rela.btrfs.text.btrfs_feature_attr_show' at offset 0x2ba0 contains 4 entries: + Offset Info Type Symbol's Value Symbol's Name + Addend +000000000000001f 0000005e00000002 R_X86_64_PC32 0000000000000000 .klp.sym.vmlinux.printk,0 - 4 + +This rela refers to the symbol '.klp.sym.vmlinux.printk,0', and the symbol index is encoded +in 'Info'. Here its symbol index is 0x5e, which is 94 in decimal, which refers to the +symbol index 94. +And in this patch module's corresponding symbol table, symbol index 94 refers to that very symbol: +[ snip ] +94: 0000000000000000 0 NOTYPE GLOBAL DEFAULT OS [0xff20] .klp.sym.vmlinux.printk,0 +[ snip ] + +--------------------------- +3.3 Livepatch symbol format +--------------------------- + +3.3.1 Required flags +-------------------- +Livepatch symbols must have their section index marked as SHN_LIVEPATCH, so +that the module loader can identify them and not attempt to resolve them. +See include/uapi/linux/elf.h for the actual definitions. + +3.3.2 Required name format +-------------------------- +Livepatch symbol names must conform to the following format: + +.klp.sym.objname.symbol_name,sympos +^ ^^ ^ ^ ^ ^ +|_______||_____| |_________| | + [A] [B] [C] [D] + +[A] The symbol name is prefixed with the string ".klp.sym." +[B] The name of the object (i.e. "vmlinux" or name of module) to + which the symbol belongs follows immediately after the prefix. +[C] The actual name of the symbol. +[D] The position of the symbol in the object (as according to kallsyms) + This is used to differentiate duplicate symbols within the same + object. The symbol position is expressed numerically (0, 1, 2...). + The symbol position of a unique symbol is 0. + +3.3.3 Example livepatch symbol names: +------------------------------------- +.klp.sym.vmlinux.snprintf,0 +.klp.sym.vmlinux.printk,0 +.klp.sym.btrfs.btrfs_ktype,0 + +3.3.4 Example `readelf --symbols` output for a patch module: +------------------------------------------------------------ +Symbol table '.symtab' contains 127 entries: + Num: Value Size Type Bind Vis Ndx Name + [ snip ] + 73: 0000000000000000 0 NOTYPE GLOBAL DEFAULT OS [0xff20] .klp.sym.vmlinux.snprintf,0 + 74: 0000000000000000 0 NOTYPE GLOBAL DEFAULT OS [0xff20] .klp.sym.vmlinux.capable,0 + 75: 0000000000000000 0 NOTYPE GLOBAL DEFAULT OS [0xff20] .klp.sym.vmlinux.find_next_bit,0 + 76: 0000000000000000 0 NOTYPE GLOBAL DEFAULT OS [0xff20] .klp.sym.vmlinux.si_swapinfo,0 + [ snip ] ^ + | + [*] +[*] Note that the 'Ndx' (Section index) for these symbols is SHN_LIVEPATCH (0xff20). + "OS" means OS-specific. + +-------------------------------------- +4. Symbol table and Elf section access +-------------------------------------- +A livepatch module's symbol table is accessible through module->symtab. + +Since apply_relocate_add() requires access to a module's section headers, +symbol table, and relocation section indices, Elf information is preserved for +livepatch modules and is made accessible by the module loader through +module->klp_info, which is a klp_modinfo struct. When a livepatch module loads, +this struct is filled in by the module loader. Its fields are documented below: + +struct klp_modinfo { + Elf_Ehdr hdr; /* Elf header */ + Elf_Shdr *sechdrs; /* Section header table */ + char *secstrings; /* String table for the section headers */ + unsigned int symndx; /* The symbol table section index */ +}; diff --git a/Documentation/locking/lockdep-design.txt b/Documentation/locking/lockdep-design.txt index 5001280e9d82..9de1c158d44c 100644 --- a/Documentation/locking/lockdep-design.txt +++ b/Documentation/locking/lockdep-design.txt @@ -97,7 +97,7 @@ between any two lock-classes: <hardirq-safe> -> <hardirq-unsafe> <softirq-safe> -> <softirq-unsafe> -The first rule comes from the fact the a hardirq-safe lock could be +The first rule comes from the fact that a hardirq-safe lock could be taken by a hardirq context, interrupting a hardirq-unsafe lock - and thus could result in a lock inversion deadlock. Likewise, a softirq-safe lock could be taken by an softirq context, interrupting a softirq-unsafe @@ -220,7 +220,7 @@ calculated, which hash is unique for every lock chain. The hash value, when the chain is validated for the first time, is then put into a hash table, which hash-table can be checked in a lockfree manner. If the locking chain occurs again later on, the hash table tells us that we -dont have to validate the chain again. +don't have to validate the chain again. Troubleshooting: ---------------- diff --git a/Documentation/lzo.txt b/Documentation/lzo.txt index ea45dd3901e3..285c54f66779 100644 --- a/Documentation/lzo.txt +++ b/Documentation/lzo.txt @@ -69,9 +69,9 @@ Description IMPORTANT NOTE : in the code some length checks are missing because certain instructions are called under the assumption that a certain number of bytes - follow because it has already been garanteed before parsing the instructions. + follow because it has already been guaranteed before parsing the instructions. They just have to "refill" this credit if they consume extra bytes. This is - an implementation design choice independant on the algorithm or encoding. + an implementation design choice independent on the algorithm or encoding. Byte sequences diff --git a/Documentation/md-cluster.txt b/Documentation/md-cluster.txt index c100c7163507..38883276d31c 100644 --- a/Documentation/md-cluster.txt +++ b/Documentation/md-cluster.txt @@ -316,3 +316,9 @@ The algorithm is: nodes are using the raid which is achieved by lock all bitmap locks within the cluster, and also those locks are unlocked accordingly. + +7. Unsupported features + +There are somethings which are not supported by cluster MD yet. + +- update size and change array_sectors. diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt index 3729cbe60e41..147ae8ec836f 100644 --- a/Documentation/memory-barriers.txt +++ b/Documentation/memory-barriers.txt @@ -4,8 +4,40 @@ By: David Howells <dhowells@redhat.com> Paul E. McKenney <paulmck@linux.vnet.ibm.com> + Will Deacon <will.deacon@arm.com> + Peter Zijlstra <peterz@infradead.org> -Contents: +========== +DISCLAIMER +========== + +This document is not a specification; it is intentionally (for the sake of +brevity) and unintentionally (due to being human) incomplete. This document is +meant as a guide to using the various memory barriers provided by Linux, but +in case of any doubt (and there are many) please ask. + +To repeat, this document is not a specification of what Linux expects from +hardware. + +The purpose of this document is twofold: + + (1) to specify the minimum functionality that one can rely on for any + particular barrier, and + + (2) to provide a guide as to how to use the barriers that are available. + +Note that an architecture can provide more than the minimum requirement +for any particular barrier, but if the architecure provides less than +that, that architecture is incorrect. + +Note also that it is possible that a barrier may be a no-op for an +architecture because the way that arch works renders an explicit barrier +unnecessary in that case. + + +======== +CONTENTS +======== (*) Abstract memory access model. @@ -31,15 +63,15 @@ Contents: (*) Implicit kernel memory barriers. - - Locking functions. + - Lock acquisition functions. - Interrupt disabling functions. - Sleep and wake-up functions. - Miscellaneous functions. - (*) Inter-CPU locking barrier effects. + (*) Inter-CPU acquiring barrier effects. - - Locks vs memory accesses. - - Locks vs I/O accesses. + - Acquires vs memory accesses. + - Acquires vs I/O accesses. (*) Where are memory barriers needed? @@ -61,6 +93,7 @@ Contents: (*) The things CPUs get up to. - And then there's the Alpha. + - Virtual Machine Guests. (*) Example uses. @@ -148,7 +181,7 @@ As a further example, consider this sequence of events: CPU 1 CPU 2 =============== =============== - { A == 1, B == 2, C = 3, P == &A, Q == &C } + { A == 1, B == 2, C == 3, P == &A, Q == &C } B = 4; Q = P; P = &B D = *Q; @@ -430,8 +463,9 @@ And a couple of implicit varieties: This acts as a one-way permeable barrier. It guarantees that all memory operations after the ACQUIRE operation will appear to happen after the ACQUIRE operation with respect to the other components of the system. - ACQUIRE operations include LOCK operations and smp_load_acquire() - operations. + ACQUIRE operations include LOCK operations and both smp_load_acquire() + and smp_cond_acquire() operations. The later builds the necessary ACQUIRE + semantics from relying on a control dependency and smp_rmb(). Memory operations that occur before an ACQUIRE operation may appear to happen after it completes. @@ -464,6 +498,11 @@ And a couple of implicit varieties: This means that ACQUIRE acts as a minimal "acquire" operation and RELEASE acts as a minimal "release" operation. +A subset of the atomic operations described in atomic_ops.txt have ACQUIRE +and RELEASE variants in addition to fully-ordered and relaxed (no barrier +semantics) definitions. For compound atomics performing both a load and a +store, ACQUIRE semantics apply only to the load and RELEASE semantics apply +only to the store portion of the operation. Memory barriers are only required where there's a possibility of interaction between two CPUs or between a CPU and a device. If it can be guaranteed that @@ -517,7 +556,7 @@ following sequence of events: CPU 1 CPU 2 =============== =============== - { A == 1, B == 2, C = 3, P == &A, Q == &C } + { A == 1, B == 2, C == 3, P == &A, Q == &C } B = 4; <write barrier> WRITE_ONCE(P, &B) @@ -544,7 +583,7 @@ between the address load and the data load: CPU 1 CPU 2 =============== =============== - { A == 1, B == 2, C = 3, P == &A, Q == &C } + { A == 1, B == 2, C == 3, P == &A, Q == &C } B = 4; <write barrier> WRITE_ONCE(P, &B); @@ -813,9 +852,10 @@ In summary: the same variable, then those stores must be ordered, either by preceding both of them with smp_mb() or by using smp_store_release() to carry out the stores. Please note that it is -not- sufficient - to use barrier() at beginning of each leg of the "if" statement, - as optimizing compilers do not necessarily respect barrier() - in this case. + to use barrier() at beginning of each leg of the "if" statement + because, as shown by the example above, optimizing compilers can + destroy the control dependency while respecting the letter of the + barrier() law. (*) Control dependencies require at least one run-time conditional between the prior load and the subsequent store, and this @@ -1731,15 +1771,15 @@ The Linux kernel has eight basic CPU memory barriers: All memory barriers except the data dependency barriers imply a compiler -barrier. Data dependencies do not impose any additional compiler ordering. +barrier. Data dependencies do not impose any additional compiler ordering. Aside: In the case of data dependencies, the compiler would be expected to issue the loads in the correct order (eg. `a[b]` would have to load the value of b before loading a[b]), however there is no guarantee in the C specification that the compiler may not speculate the value of b (eg. is equal to 1) and load a before b (eg. tmp = a[1]; if (b != 1) -tmp = a[b]; ). There is also the problem of a compiler reloading b after -having loaded a[b], thus having a newer copy of b than a[b]. A consensus +tmp = a[b]; ). There is also the problem of a compiler reloading b after +having loaded a[b], thus having a newer copy of b than a[b]. A consensus has not yet been reached about these problems, however the READ_ONCE() macro is a good place to start looking. @@ -1794,6 +1834,7 @@ There are some more advanced barrier functions: (*) lockless_dereference(); + This can be thought of as a pointer-fetch wrapper around the smp_read_barrier_depends() data-dependency barrier. @@ -1858,7 +1899,7 @@ This is a variation on the mandatory write barrier that causes writes to weakly ordered I/O regions to be partially ordered. Its effects may go beyond the CPU->Hardware interface and actually affect the hardware at some level. -See the subsection "Locks vs I/O accesses" for more information. +See the subsection "Acquires vs I/O accesses" for more information. =============================== @@ -1873,8 +1914,8 @@ provide more substantial guarantees, but these may not be relied upon outside of arch specific code. -ACQUIRING FUNCTIONS -------------------- +LOCK ACQUISITION FUNCTIONS +-------------------------- The Linux kernel has a number of locking constructs: @@ -1895,7 +1936,7 @@ for each construct. These operations all imply certain barriers: Memory operations issued before the ACQUIRE may be completed after the ACQUIRE operation has completed. An smp_mb__before_spinlock(), combined with a following ACQUIRE, orders prior stores against - subsequent loads and stores. Note that this is weaker than smp_mb()! + subsequent loads and stores. Note that this is weaker than smp_mb()! The smp_mb__before_spinlock() primitive is free on many architectures. (2) RELEASE operation implication: @@ -2090,9 +2131,9 @@ or: event_indicated = 1; wake_up_process(event_daemon); -A write memory barrier is implied by wake_up() and co. if and only if they wake -something up. The barrier occurs before the task state is cleared, and so sits -between the STORE to indicate the event and the STORE to set TASK_RUNNING: +A write memory barrier is implied by wake_up() and co. if and only if they +wake something up. The barrier occurs before the task state is cleared, and so +sits between the STORE to indicate the event and the STORE to set TASK_RUNNING: CPU 1 CPU 2 =============================== =============================== @@ -2206,7 +2247,7 @@ three CPUs; then should the following sequence of events occur: Then there is no guarantee as to what order CPU 3 will see the accesses to *A through *H occur in, other than the constraints imposed by the separate locks -on the separate CPUs. It might, for example, see: +on the separate CPUs. It might, for example, see: *E, ACQUIRE M, ACQUIRE Q, *G, *C, *F, *A, *B, RELEASE Q, *D, *H, RELEASE M @@ -2486,9 +2527,9 @@ The following operations are special locking primitives: clear_bit_unlock(); __clear_bit_unlock(); -These implement ACQUIRE-class and RELEASE-class operations. These should be used in -preference to other operations when implementing locking primitives, because -their implementations can be optimised on many architectures. +These implement ACQUIRE-class and RELEASE-class operations. These should be +used in preference to other operations when implementing locking primitives, +because their implementations can be optimised on many architectures. [!] Note that special memory barrier primitives are available for these situations because on some CPUs the atomic instructions used imply full memory @@ -2568,12 +2609,12 @@ explicit barriers are used. Normally this won't be a problem because the I/O accesses done inside such sections will include synchronous load operations on strictly ordered I/O -registers that form implicit I/O barriers. If this isn't sufficient then an +registers that form implicit I/O barriers. If this isn't sufficient then an mmiowb() may need to be used explicitly. A similar situation may occur between an interrupt routine and two routines -running on separate CPUs that communicate with each other. If such a case is +running on separate CPUs that communicate with each other. If such a case is likely, then interrupt-disabling locks should be used to guarantee ordering. @@ -2587,8 +2628,8 @@ functions: (*) inX(), outX(): These are intended to talk to I/O space rather than memory space, but - that's primarily a CPU-specific concept. The i386 and x86_64 processors do - indeed have special I/O space access cycles and instructions, but many + that's primarily a CPU-specific concept. The i386 and x86_64 processors + do indeed have special I/O space access cycles and instructions, but many CPUs don't have such a concept. The PCI bus, amongst others, defines an I/O space concept which - on such @@ -2610,7 +2651,7 @@ functions: Whether these are guaranteed to be fully ordered and uncombined with respect to each other on the issuing CPU depends on the characteristics - defined for the memory window through which they're accessing. On later + defined for the memory window through which they're accessing. On later i386 architecture machines, for example, this is controlled by way of the MTRR registers. @@ -2635,10 +2676,10 @@ functions: (*) readX_relaxed(), writeX_relaxed() These are similar to readX() and writeX(), but provide weaker memory - ordering guarantees. Specifically, they do not guarantee ordering with + ordering guarantees. Specifically, they do not guarantee ordering with respect to normal memory accesses (e.g. DMA buffers) nor do they guarantee - ordering with respect to LOCK or UNLOCK operations. If the latter is - required, an mmiowb() barrier can be used. Note that relaxed accesses to + ordering with respect to LOCK or UNLOCK operations. If the latter is + required, an mmiowb() barrier can be used. Note that relaxed accesses to the same peripheral are guaranteed to be ordered with respect to each other. @@ -3040,8 +3081,9 @@ The Alpha defines the Linux kernel's memory barrier model. See the subsection on "Cache Coherency" above. + VIRTUAL MACHINE GUESTS -------------------- +---------------------- Guests running within virtual machines might be affected by SMP effects even if the guest itself is compiled without SMP support. This is an artifact of @@ -3050,7 +3092,7 @@ barriers for this use-case would be possible but is often suboptimal. To handle this case optimally, low-level virt_mb() etc macros are available. These have the same effect as smp_mb() etc when SMP is enabled, but generate -identical code for SMP and non-SMP systems. For example, virtual machine guests +identical code for SMP and non-SMP systems. For example, virtual machine guests should use virt_mb() rather than smp_mb() when synchronizing against a (possibly SMP) host. @@ -3058,6 +3100,7 @@ These are equivalent to smp_mb() etc counterparts in all other respects, in particular, they do not control MMIO effects: to control MMIO effects, use mandatory barriers. + ============ EXAMPLE USES ============ diff --git a/Documentation/memory-hotplug.txt b/Documentation/memory-hotplug.txt index 443f4b44ad97..0d7cb955aa01 100644 --- a/Documentation/memory-hotplug.txt +++ b/Documentation/memory-hotplug.txt @@ -261,10 +261,11 @@ it according to the policy which can be read from "auto_online_blocks" file: % cat /sys/devices/system/memory/auto_online_blocks -The default is "offline" which means the newly added memory is not in a -ready-to-use state and you have to "online" the newly added memory blocks -manually. Automatic onlining can be requested by writing "online" to -"auto_online_blocks" file: +The default depends on the CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE kernel config +option. If it is disabled the default is "offline" which means the newly added +memory is not in a ready-to-use state and you have to "online" the newly added +memory blocks manually. Automatic onlining can be requested by writing "online" +to "auto_online_blocks" file: % echo online > /sys/devices/system/memory/auto_online_blocks diff --git a/Documentation/mmc/00-INDEX b/Documentation/mmc/00-INDEX index a9ba6720ffdf..4623bc0aa0bb 100644 --- a/Documentation/mmc/00-INDEX +++ b/Documentation/mmc/00-INDEX @@ -6,3 +6,5 @@ mmc-dev-parts.txt - info on SD and MMC device partitions mmc-async-req.txt - info on mmc asynchronous requests +mmc-tools.txt + - info on mmc-utils tools diff --git a/Documentation/mmc/mmc-tools.txt b/Documentation/mmc/mmc-tools.txt new file mode 100644 index 000000000000..735509c165d5 --- /dev/null +++ b/Documentation/mmc/mmc-tools.txt @@ -0,0 +1,34 @@ +MMC tools introduction +====================== + +There is one MMC test tools called mmc-utils, which is maintained by Chris Ball, +you can find it at the below public git repository: +http://git.kernel.org/cgit/linux/kernel/git/cjb/mmc-utils.git/ + +Functions +========= + +The mmc-utils tools can do the following: + - Print and parse extcsd data. + - Determine the eMMC writeprotect status. + - Set the eMMC writeprotect status. + - Set the eMMC data sector size to 4KB by disabling emulation. + - Create general purpose partition. + - Enable the enhanced user area. + - Enable write reliability per partition. + - Print the response to STATUS_SEND (CMD13). + - Enable the boot partition. + - Set Boot Bus Conditions. + - Enable the eMMC BKOPS feature. + - Permanently enable the eMMC H/W Reset feature. + - Permanently disable the eMMC H/W Reset feature. + - Send Sanitize command. + - Program authentication key for the device. + - Counter value for the rpmb device will be read to stdout. + - Read from rpmb device to output. + - Write to rpmb device from data file. + - Enable the eMMC cache feature. + - Disable the eMMC cache feature. + - Print and parse CID data. + - Print and parse CSD data. + - Print and parse SCR data. diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt index 334b49ef02d1..57f52cdce32e 100644 --- a/Documentation/networking/bonding.txt +++ b/Documentation/networking/bonding.txt @@ -1880,8 +1880,8 @@ or more peers on the local network. The ARP monitor relies on the device driver itself to verify that traffic is flowing. In particular, the driver must keep up to -date the last receive time, dev->last_rx, and transmit start time, -dev->trans_start. If these are not updated by the driver, then the +date the last receive time, dev->last_rx. Drivers that use NETIF_F_LLTX +flag must also update netdev_queue->trans_start. If they do not, then the ARP monitor will immediately fail any slaves using that driver, and those slaves will stay down. If networking monitoring (tcpdump, etc) shows the ARP requests and replies on the network, then it may be that diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt index 6ab619fcc517..d58ff8467953 100644 --- a/Documentation/networking/can.txt +++ b/Documentation/networking/can.txt @@ -1256,7 +1256,7 @@ solution for a couple of reasons: 7. SocketCAN resources ----------------------- - The Linux CAN / SocketCAN project ressources (project site / mailing list) + The Linux CAN / SocketCAN project resources (project site / mailing list) are referenced in the MAINTAINERS file in the Linux source tree. Search for CAN NETWORK [LAYERS|DRIVERS]. diff --git a/Documentation/networking/dsa/bcm_sf2.txt b/Documentation/networking/dsa/bcm_sf2.txt index d999d0c1c5b8..eba3a2431e91 100644 --- a/Documentation/networking/dsa/bcm_sf2.txt +++ b/Documentation/networking/dsa/bcm_sf2.txt @@ -38,7 +38,7 @@ Implementation details ====================== The driver is located in drivers/net/dsa/bcm_sf2.c and is implemented as a DSA -driver; see Documentation/networking/dsa/dsa.txt for details on the subsytem +driver; see Documentation/networking/dsa/dsa.txt for details on the subsystem and what it provides. The SF2 switch is configured to enable a Broadcom specific 4-bytes switch tag diff --git a/Documentation/networking/dsa/dsa.txt b/Documentation/networking/dsa/dsa.txt index 3b196c304b73..631b0f7ae16f 100644 --- a/Documentation/networking/dsa/dsa.txt +++ b/Documentation/networking/dsa/dsa.txt @@ -334,7 +334,7 @@ more specifically with its VLAN filtering portion when configuring VLANs on top of per-port slave network devices. Since DSA primarily deals with MDIO-connected switches, although not exclusively, SWITCHDEV's prepare/abort/commit phases are often simplified into a prepare phase which -checks whether the operation is supporte by the DSA switch driver, and a commit +checks whether the operation is supported by the DSA switch driver, and a commit phase which applies the changes. As of today, the only SWITCHDEV objects supported by DSA are the FDB and VLAN @@ -533,7 +533,7 @@ Bridge layer out at the switch hardware for the switch to (re) learn MAC addresses behind this port. -- port_stp_update: bridge layer function invoked when a given switch port STP +- port_stp_state_set: bridge layer function invoked when a given switch port STP state is computed by the bridge layer and should be propagated to switch hardware to forward/block/learn traffic. The switch driver is responsible for computing a STP state change based on current and asked parameters and perform @@ -542,6 +542,12 @@ Bridge layer Bridge VLAN filtering --------------------- +- port_vlan_prepare: bridge layer function invoked when the bridge prepares the + configuration of a VLAN on the given port. If the operation is not supported + by the hardware, this function should return -EOPNOTSUPP to inform the bridge + code to fallback to a software implementation. No hardware setup must be done + in this function. See port_vlan_add for this and details. + - port_vlan_add: bridge layer function invoked when a VLAN is configured (tagged or untagged) for the given switch port @@ -552,6 +558,12 @@ Bridge VLAN filtering function that the driver has to call for each VLAN the given port is a member of. A switchdev object is used to carry the VID and bridge flags. +- port_fdb_prepare: bridge layer function invoked when the bridge prepares the + installation of a Forwarding Database entry. If the operation is not + supported, this function should return -EOPNOTSUPP to inform the bridge code + to fallback to a software implementation. No hardware setup must be done in + this function. See port_fdb_add for this and details. + - port_fdb_add: bridge layer function invoked when the bridge wants to install a Forwarding Database entry, the switch hardware should be programmed with the specified address in the specified VLAN Id in the forwarding database @@ -565,6 +577,10 @@ of DSA, would be the its port-based VLAN, used by the associated bridge device. the specified MAC address from the specified VLAN ID if it was mapped into this port forwarding database +- port_fdb_dump: bridge layer function invoked with a switchdev callback + function that the driver has to call for each MAC address known to be behind + the given port. A switchdev object is used to carry the VID and FDB info. + TODO ==== diff --git a/Documentation/networking/filter.txt b/Documentation/networking/filter.txt index 96da119a47e7..683ada5ad81d 100644 --- a/Documentation/networking/filter.txt +++ b/Documentation/networking/filter.txt @@ -216,21 +216,21 @@ opcodes as defined in linux/filter.h stand for: jmp 6 Jump to label ja 6 Jump to label - jeq 7, 8 Jump on k == A - jneq 8 Jump on k != A - jne 8 Jump on k != A - jlt 8 Jump on k < A - jle 8 Jump on k <= A - jgt 7, 8 Jump on k > A - jge 7, 8 Jump on k >= A - jset 7, 8 Jump on k & A + jeq 7, 8 Jump on A == k + jneq 8 Jump on A != k + jne 8 Jump on A != k + jlt 8 Jump on A < k + jle 8 Jump on A <= k + jgt 7, 8 Jump on A > k + jge 7, 8 Jump on A >= k + jset 7, 8 Jump on A & k add 0, 4 A + <x> sub 0, 4 A - <x> mul 0, 4 A * <x> div 0, 4 A / <x> mod 0, 4 A % <x> - neg 0, 4 !A + neg !A and 0, 4 A & <x> or 0, 4 A | <x> xor 0, 4 A ^ <x> @@ -1095,6 +1095,87 @@ all use cases. See details of eBPF verifier in kernel/bpf/verifier.c +Direct packet access +-------------------- +In cls_bpf and act_bpf programs the verifier allows direct access to the packet +data via skb->data and skb->data_end pointers. +Ex: +1: r4 = *(u32 *)(r1 +80) /* load skb->data_end */ +2: r3 = *(u32 *)(r1 +76) /* load skb->data */ +3: r5 = r3 +4: r5 += 14 +5: if r5 > r4 goto pc+16 +R1=ctx R3=pkt(id=0,off=0,r=14) R4=pkt_end R5=pkt(id=0,off=14,r=14) R10=fp +6: r0 = *(u16 *)(r3 +12) /* access 12 and 13 bytes of the packet */ + +this 2byte load from the packet is safe to do, since the program author +did check 'if (skb->data + 14 > skb->data_end) goto err' at insn #5 which +means that in the fall-through case the register R3 (which points to skb->data) +has at least 14 directly accessible bytes. The verifier marks it +as R3=pkt(id=0,off=0,r=14). +id=0 means that no additional variables were added to the register. +off=0 means that no additional constants were added. +r=14 is the range of safe access which means that bytes [R3, R3 + 14) are ok. +Note that R5 is marked as R5=pkt(id=0,off=14,r=14). It also points +to the packet data, but constant 14 was added to the register, so +it now points to 'skb->data + 14' and accessible range is [R5, R5 + 14 - 14) +which is zero bytes. + +More complex packet access may look like: + R0=imm1 R1=ctx R3=pkt(id=0,off=0,r=14) R4=pkt_end R5=pkt(id=0,off=14,r=14) R10=fp + 6: r0 = *(u8 *)(r3 +7) /* load 7th byte from the packet */ + 7: r4 = *(u8 *)(r3 +12) + 8: r4 *= 14 + 9: r3 = *(u32 *)(r1 +76) /* load skb->data */ +10: r3 += r4 +11: r2 = r1 +12: r2 <<= 48 +13: r2 >>= 48 +14: r3 += r2 +15: r2 = r3 +16: r2 += 8 +17: r1 = *(u32 *)(r1 +80) /* load skb->data_end */ +18: if r2 > r1 goto pc+2 + R0=inv56 R1=pkt_end R2=pkt(id=2,off=8,r=8) R3=pkt(id=2,off=0,r=8) R4=inv52 R5=pkt(id=0,off=14,r=14) R10=fp +19: r1 = *(u8 *)(r3 +4) +The state of the register R3 is R3=pkt(id=2,off=0,r=8) +id=2 means that two 'r3 += rX' instructions were seen, so r3 points to some +offset within a packet and since the program author did +'if (r3 + 8 > r1) goto err' at insn #18, the safe range is [R3, R3 + 8). +The verifier only allows 'add' operation on packet registers. Any other +operation will set the register state to 'unknown_value' and it won't be +available for direct packet access. +Operation 'r3 += rX' may overflow and become less than original skb->data, +therefore the verifier has to prevent that. So it tracks the number of +upper zero bits in all 'uknown_value' registers, so when it sees +'r3 += rX' instruction and rX is more than 16-bit value, it will error as: +"cannot add integer value with N upper zero bits to ptr_to_packet" +Ex. after insn 'r4 = *(u8 *)(r3 +12)' (insn #7 above) the state of r4 is +R4=inv56 which means that upper 56 bits on the register are guaranteed +to be zero. After insn 'r4 *= 14' the state becomes R4=inv52, since +multiplying 8-bit value by constant 14 will keep upper 52 bits as zero. +Similarly 'r2 >>= 48' will make R2=inv48, since the shift is not sign +extending. This logic is implemented in evaluate_reg_alu() function. + +The end result is that bpf program author can access packet directly +using normal C code as: + void *data = (void *)(long)skb->data; + void *data_end = (void *)(long)skb->data_end; + struct eth_hdr *eth = data; + struct iphdr *iph = data + sizeof(*eth); + struct udphdr *udp = data + sizeof(*eth) + sizeof(*iph); + + if (data + sizeof(*eth) + sizeof(*iph) + sizeof(*udp) > data_end) + return 0; + if (eth->h_proto != htons(ETH_P_IP)) + return 0; + if (iph->protocol != IPPROTO_UDP || iph->ihl != 5) + return 0; + if (udp->dest == 53 || udp->source == 9) + ...; +which makes such programs easier to write comparing to LD_ABS insn +and significantly faster. + eBPF maps --------- 'maps' is a generic storage of different types for sharing data between kernel @@ -1293,5 +1374,5 @@ to give potential BPF hackers or security auditors a better overview of the underlying architecture. Jay Schulist <jschlst@samba.org> -Daniel Borkmann <dborkman@redhat.com> -Alexei Starovoitov <ast@plumgrid.com> +Daniel Borkmann <daniel@iogearbox.net> +Alexei Starovoitov <ast@kernel.org> diff --git a/Documentation/networking/gen_stats.txt b/Documentation/networking/gen_stats.txt index 70e6275b757a..ff630a87b511 100644 --- a/Documentation/networking/gen_stats.txt +++ b/Documentation/networking/gen_stats.txt @@ -33,7 +33,8 @@ my_dumping_routine(struct sk_buff *skb, ...) { struct gnet_dump dump; - if (gnet_stats_start_copy(skb, TCA_STATS2, &mystruct->lock, &dump) < 0) + if (gnet_stats_start_copy(skb, TCA_STATS2, &mystruct->lock, &dump, + TCA_PAD) < 0) goto rtattr_failure; if (gnet_stats_copy_basic(&dump, &mystruct->bstats) < 0 || @@ -56,7 +57,8 @@ existing TLV types. my_dumping_routine(struct sk_buff *skb, ...) { if (gnet_stats_start_copy_compat(skb, TCA_STATS2, TCA_STATS, - TCA_XSTATS, &mystruct->lock, &dump) < 0) + TCA_XSTATS, &mystruct->lock, &dump, + TCA_PAD) < 0) goto rtattr_failure; ... } diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index b183e2b606c8..6c7f365b1515 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -63,6 +63,16 @@ fwmark_reflect - BOOLEAN fwmark of the packet they are replying to. Default: 0 +fib_multipath_use_neigh - BOOLEAN + Use status of existing neighbor entry when determining nexthop for + multipath routes. If disabled, neighbor information is not used and + packets could be directed to a failed nexthop. Only valid for kernels + built with CONFIG_IP_ROUTE_MULTIPATH enabled. + Default: 0 (disabled) + Possible values: + 0 - disabled + 1 - enabled + route/max_size - INTEGER Maximum number of routes allowed in the kernel. Increase this when using large numbers of interfaces and/or routes. diff --git a/Documentation/networking/mac80211-injection.txt b/Documentation/networking/mac80211-injection.txt index ec8f934c2eb2..d58d78df9ca2 100644 --- a/Documentation/networking/mac80211-injection.txt +++ b/Documentation/networking/mac80211-injection.txt @@ -37,14 +37,27 @@ radiotap headers and used to control injection: HT rate for the transmission (only for devices without own rate control). Also some flags are parsed - IEEE80211_TX_RC_SHORT_GI: use short guard interval - IEEE80211_TX_RC_40_MHZ_WIDTH: send in HT40 mode + IEEE80211_RADIOTAP_MCS_SGI: use short guard interval + IEEE80211_RADIOTAP_MCS_BW_40: send in HT40 mode * IEEE80211_RADIOTAP_DATA_RETRIES number of retries when either IEEE80211_RADIOTAP_RATE or IEEE80211_RADIOTAP_MCS was used + * IEEE80211_RADIOTAP_VHT + + VHT mcs and number of streams used in the transmission (only for devices + without own rate control). Also other fields are parsed + + flags field + IEEE80211_RADIOTAP_VHT_FLAG_SGI: use short guard interval + + bandwidth field + 1: send using 40MHz channel width + 4: send using 80MHz channel width + 11: send using 160MHz channel width + The injection code can also skip all other currently defined radiotap fields facilitating replay of captured radiotap headers directly. diff --git a/Documentation/networking/netdev-features.txt b/Documentation/networking/netdev-features.txt index f310edec8a77..7413eb05223b 100644 --- a/Documentation/networking/netdev-features.txt +++ b/Documentation/networking/netdev-features.txt @@ -131,13 +131,11 @@ stack. Driver should not change behaviour based on them. * LLTX driver (deprecated for hardware drivers) -NETIF_F_LLTX should be set in drivers that implement their own locking in -transmit path or don't need locking at all (e.g. software tunnels). -In ndo_start_xmit, it is recommended to use a try_lock and return -NETDEV_TX_LOCKED when the spin lock fails. The locking should also properly -protect against other callbacks (the rules you need to find out). +NETIF_F_LLTX is meant to be used by drivers that don't need locking at all, +e.g. software tunnels. -Don't use it for new drivers. +This is also used in a few legacy drivers that implement their +own locking, don't use it for new (hardware) drivers. * netns-local device diff --git a/Documentation/networking/netdevices.txt b/Documentation/networking/netdevices.txt index 0b1cf6b2a592..7fec2061a334 100644 --- a/Documentation/networking/netdevices.txt +++ b/Documentation/networking/netdevices.txt @@ -69,10 +69,9 @@ ndo_start_xmit: When the driver sets NETIF_F_LLTX in dev->features this will be called without holding netif_tx_lock. In this case the driver - has to lock by itself when needed. It is recommended to use a try lock - for this and return NETDEV_TX_LOCKED when the spin lock fails. - The locking there should also properly protect against - set_rx_mode. Note that the use of NETIF_F_LLTX is deprecated. + has to lock by itself when needed. + The locking there should also properly protect against + set_rx_mode. WARNING: use of NETIF_F_LLTX is deprecated. Don't use it for new drivers. Context: Process with BHs disabled or BH (timer), @@ -83,8 +82,6 @@ ndo_start_xmit: o NETDEV_TX_BUSY Cannot transmit packet, try later Usually a bug, means queue start/stop flow control is broken in the driver. Note: the driver must NOT put the skb in its DMA ring. - o NETDEV_TX_LOCKED Locking failed, please retry quickly. - Only valid when NETIF_F_LLTX is set. ndo_tx_timeout: Synchronization: netif_tx_lock spinlock; all TX queues frozen. diff --git a/Documentation/networking/segmentation-offloads.txt b/Documentation/networking/segmentation-offloads.txt new file mode 100644 index 000000000000..f200467ade38 --- /dev/null +++ b/Documentation/networking/segmentation-offloads.txt @@ -0,0 +1,130 @@ +Segmentation Offloads in the Linux Networking Stack + +Introduction +============ + +This document describes a set of techniques in the Linux networking stack +to take advantage of segmentation offload capabilities of various NICs. + +The following technologies are described: + * TCP Segmentation Offload - TSO + * UDP Fragmentation Offload - UFO + * IPIP, SIT, GRE, and UDP Tunnel Offloads + * Generic Segmentation Offload - GSO + * Generic Receive Offload - GRO + * Partial Generic Segmentation Offload - GSO_PARTIAL + +TCP Segmentation Offload +======================== + +TCP segmentation allows a device to segment a single frame into multiple +frames with a data payload size specified in skb_shinfo()->gso_size. +When TCP segmentation requested the bit for either SKB_GSO_TCP or +SKB_GSO_TCP6 should be set in skb_shinfo()->gso_type and +skb_shinfo()->gso_size should be set to a non-zero value. + +TCP segmentation is dependent on support for the use of partial checksum +offload. For this reason TSO is normally disabled if the Tx checksum +offload for a given device is disabled. + +In order to support TCP segmentation offload it is necessary to populate +the network and transport header offsets of the skbuff so that the device +drivers will be able determine the offsets of the IP or IPv6 header and the +TCP header. In addition as CHECKSUM_PARTIAL is required csum_start should +also point to the TCP header of the packet. + +For IPv4 segmentation we support one of two types in terms of the IP ID. +The default behavior is to increment the IP ID with every segment. If the +GSO type SKB_GSO_TCP_FIXEDID is specified then we will not increment the IP +ID and all segments will use the same IP ID. If a device has +NETIF_F_TSO_MANGLEID set then the IP ID can be ignored when performing TSO +and we will either increment the IP ID for all frames, or leave it at a +static value based on driver preference. + +UDP Fragmentation Offload +========================= + +UDP fragmentation offload allows a device to fragment an oversized UDP +datagram into multiple IPv4 fragments. Many of the requirements for UDP +fragmentation offload are the same as TSO. However the IPv4 ID for +fragments should not increment as a single IPv4 datagram is fragmented. + +IPIP, SIT, GRE, UDP Tunnel, and Remote Checksum Offloads +======================================================== + +In addition to the offloads described above it is possible for a frame to +contain additional headers such as an outer tunnel. In order to account +for such instances an additional set of segmentation offload types were +introduced including SKB_GSO_IPIP, SKB_GSO_SIT, SKB_GSO_GRE, and +SKB_GSO_UDP_TUNNEL. These extra segmentation types are used to identify +cases where there are more than just 1 set of headers. For example in the +case of IPIP and SIT we should have the network and transport headers moved +from the standard list of headers to "inner" header offsets. + +Currently only two levels of headers are supported. The convention is to +refer to the tunnel headers as the outer headers, while the encapsulated +data is normally referred to as the inner headers. Below is the list of +calls to access the given headers: + +IPIP/SIT Tunnel: + Outer Inner +MAC skb_mac_header +Network skb_network_header skb_inner_network_header +Transport skb_transport_header + +UDP/GRE Tunnel: + Outer Inner +MAC skb_mac_header skb_inner_mac_header +Network skb_network_header skb_inner_network_header +Transport skb_transport_header skb_inner_transport_header + +In addition to the above tunnel types there are also SKB_GSO_GRE_CSUM and +SKB_GSO_UDP_TUNNEL_CSUM. These two additional tunnel types reflect the +fact that the outer header also requests to have a non-zero checksum +included in the outer header. + +Finally there is SKB_GSO_REMCSUM which indicates that a given tunnel header +has requested a remote checksum offload. In this case the inner headers +will be left with a partial checksum and only the outer header checksum +will be computed. + +Generic Segmentation Offload +============================ + +Generic segmentation offload is a pure software offload that is meant to +deal with cases where device drivers cannot perform the offloads described +above. What occurs in GSO is that a given skbuff will have its data broken +out over multiple skbuffs that have been resized to match the MSS provided +via skb_shinfo()->gso_size. + +Before enabling any hardware segmentation offload a corresponding software +offload is required in GSO. Otherwise it becomes possible for a frame to +be re-routed between devices and end up being unable to be transmitted. + +Generic Receive Offload +======================= + +Generic receive offload is the complement to GSO. Ideally any frame +assembled by GRO should be segmented to create an identical sequence of +frames using GSO, and any sequence of frames segmented by GSO should be +able to be reassembled back to the original by GRO. The only exception to +this is IPv4 ID in the case that the DF bit is set for a given IP header. +If the value of the IPv4 ID is not sequentially incrementing it will be +altered so that it is when a frame assembled via GRO is segmented via GSO. + +Partial Generic Segmentation Offload +==================================== + +Partial generic segmentation offload is a hybrid between TSO and GSO. What +it effectively does is take advantage of certain traits of TCP and tunnels +so that instead of having to rewrite the packet headers for each segment +only the inner-most transport header and possibly the outer-most network +header need to be updated. This allows devices that do not support tunnel +offloads or tunnel offloads with checksum to still make use of segmentation. + +With the partial offload what occurs is that all headers excluding the +inner transport header are updated such that they will contain the correct +values for if the header was simply duplicated. The one exception to this +is the outer IPv4 ID field. It is up to the device drivers to guarantee +that the IPv4 ID field is incremented in the case that a given header does +not have the DF bit set. diff --git a/Documentation/networking/stmmac.txt b/Documentation/networking/stmmac.txt index d64a14714236..671fe3dd56d3 100644 --- a/Documentation/networking/stmmac.txt +++ b/Documentation/networking/stmmac.txt @@ -1,6 +1,6 @@ STMicroelectronics 10/100/1000 Synopsys Ethernet driver -Copyright (C) 2007-2014 STMicroelectronics Ltd +Copyright (C) 2007-2015 STMicroelectronics Ltd Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> This is the driver for the MAC 10/100/1000 on-chip Ethernet controllers @@ -138,6 +138,8 @@ struct plat_stmmacenet_data { int (*init)(struct platform_device *pdev, void *priv); void (*exit)(struct platform_device *pdev, void *priv); void *bsp_priv; + int has_gmac4; + bool tso_en; }; Where: @@ -181,6 +183,8 @@ Where: registers. init/exit callbacks should not use or modify platform data. o bsp_priv: another private pointer. + o has_gmac4: uses GMAC4 core. + o tso_en: Enables TSO (TCP Segmentation Offload) feature. For MDIO bus The we have: @@ -278,6 +282,13 @@ Please see the following document: o stmmac_ethtool.c: to implement the ethtool support; o stmmac.h: private driver structure; o common.h: common definitions and VFTs; + o mmc_core.c/mmc.h: Management MAC Counters; + o stmmac_hwtstamp.c: HW timestamp support for PTP; + o stmmac_ptp.c: PTP 1588 clock; + o dwmac-<XXX>.c: these are for the platform glue-logic file; e.g. dwmac-sti.c + for STMicroelectronics SoCs. + +- GMAC 3.x o descs.h: descriptor structure definitions; o dwmac1000_core.c: dwmac GiGa core functions; o dwmac1000_dma.c: dma functions for the GMAC chip; @@ -289,11 +300,32 @@ Please see the following document: o enh_desc.c: functions for handling enhanced descriptors; o norm_desc.c: functions for handling normal descriptors; o chain_mode.c/ring_mode.c:: functions to manage RING/CHAINED modes; - o mmc_core.c/mmc.h: Management MAC Counters; - o stmmac_hwtstamp.c: HW timestamp support for PTP; - o stmmac_ptp.c: PTP 1588 clock; - o dwmac-<XXX>.c: these are for the platform glue-logic file; e.g. dwmac-sti.c - for STMicroelectronics SoCs. + +- GMAC4.x generation + o dwmac4_core.c: dwmac GMAC4.x core functions; + o dwmac4_desc.c: functions for handling GMAC4.x descriptors; + o dwmac4_descs.h: descriptor definitions; + o dwmac4_dma.c: dma functions for the GMAC4.x chip; + o dwmac4_dma.h: dma definitions for the GMAC4.x chip; + o dwmac4.h: core definitions for the GMAC4.x chip; + o dwmac4_lib.c: generic GMAC4.x functions; + +4.12) TSO support (GMAC4.x) + +TSO (Tcp Segmentation Offload) feature is supported by GMAC 4.x chip family. +When a packet is sent through TCP protocol, the TCP stack ensures that +the SKB provided to the low level driver (stmmac in our case) matches with +the maximum frame len (IP header + TCP header + payload <= 1500 bytes (for +MTU set to 1500)). It means that if an application using TCP want to send a +packet which will have a length (after adding headers) > 1514 the packet +will be split in several TCP packets: The data payload is split and headers +(TCP/IP ..) are added. It is done by software. + +When TSO is enabled, the TCP stack doesn't care about the maximum frame +length and provide SKB packet to stmmac as it is. The GMAC IP will have to +perform the segmentation by it self to match with maximum frame length. + +This feature can be enabled in device tree through "snps,tso" entry. 5) Debug Information diff --git a/Documentation/networking/switchdev.txt b/Documentation/networking/switchdev.txt index 2f659129694b..31c39115834d 100644 --- a/Documentation/networking/switchdev.txt +++ b/Documentation/networking/switchdev.txt @@ -89,6 +89,18 @@ Typically, the management port is not participating in offloaded data plane and is loaded with a different driver, such as a NIC driver, on the management port device. +Switch ID +^^^^^^^^^ + +The switchdev driver must implement the switchdev op switchdev_port_attr_get +for SWITCHDEV_ATTR_ID_PORT_PARENT_ID for each port netdev, returning the same +physical ID for each port of a switch. The ID must be unique between switches +on the same system. The ID does not need to be unique between switches on +different systems. + +The switch ID is used to locate ports on a switch and to know if aggregated +ports belong to the same switch. + Port Netdev Naming ^^^^^^^^^^^^^^^^^^ @@ -104,25 +116,13 @@ external configuration. For example, if a physical 40G port is split logically into 4 10G ports, resulting in 4 port netdevs, the device can give a unique name for each port using port PHYS name. The udev rule would be: -SUBSYSTEM=="net", ACTION=="add", DRIVER="<driver>", ATTR{phys_port_name}!="", \ - NAME="$attr{phys_port_name}" +SUBSYSTEM=="net", ACTION=="add", ATTR{phys_switch_id}=="<phys_switch_id>", \ + ATTR{phys_port_name}!="", NAME="swX$attr{phys_port_name}" Suggested naming convention is "swXpYsZ", where X is the switch name or ID, Y is the port name or ID, and Z is the sub-port name or ID. For example, sw1p1s0 would be sub-port 0 on port 1 on switch 1. -Switch ID -^^^^^^^^^ - -The switchdev driver must implement the switchdev op switchdev_port_attr_get -for SWITCHDEV_ATTR_ID_PORT_PARENT_ID for each port netdev, returning the same -physical ID for each port of a switch. The ID must be unique between switches -on the same system. The ID does not need to be unique between switches on -different systems. - -The switch ID is used to locate ports on a switch and to know if aggregated -ports belong to the same switch. - Port Features ^^^^^^^^^^^^^ diff --git a/Documentation/networking/timestamping.txt b/Documentation/networking/timestamping.txt index a977339fbe0a..671cccf0dcd2 100644 --- a/Documentation/networking/timestamping.txt +++ b/Documentation/networking/timestamping.txt @@ -44,11 +44,17 @@ timeval of SO_TIMESTAMP (ms). Supports multiple types of timestamp requests. As a result, this socket option takes a bitmap of flags, not a boolean. In - err = setsockopt(fd, SOL_SOCKET, SO_TIMESTAMPING, (void *) val, &val); + err = setsockopt(fd, SOL_SOCKET, SO_TIMESTAMPING, (void *) val, + sizeof(val)); val is an integer with any of the following bits set. Setting other bit returns EINVAL and does not change the current state. +The socket option configures timestamp generation for individual +sk_buffs (1.3.1), timestamp reporting to the socket's error +queue (1.3.2) and options (1.3.3). Timestamp generation can also +be enabled for individual sendmsg calls using cmsg (1.3.4). + 1.3.1 Timestamp Generation @@ -71,13 +77,16 @@ SOF_TIMESTAMPING_RX_SOFTWARE: kernel receive stack. SOF_TIMESTAMPING_TX_HARDWARE: - Request tx timestamps generated by the network adapter. + Request tx timestamps generated by the network adapter. This flag + can be enabled via both socket options and control messages. SOF_TIMESTAMPING_TX_SOFTWARE: Request tx timestamps when data leaves the kernel. These timestamps are generated in the device driver as close as possible, but always prior to, passing the packet to the network interface. Hence, they require driver support and may not be available for all devices. + This flag can be enabled via both socket options and control messages. + SOF_TIMESTAMPING_TX_SCHED: Request tx timestamps prior to entering the packet scheduler. Kernel @@ -90,7 +99,8 @@ SOF_TIMESTAMPING_TX_SCHED: machines with virtual devices where a transmitted packet travels through multiple devices and, hence, multiple packet schedulers, a timestamp is generated at each layer. This allows for fine - grained measurement of queuing delay. + grained measurement of queuing delay. This flag can be enabled + via both socket options and control messages. SOF_TIMESTAMPING_TX_ACK: Request tx timestamps when all data in the send buffer has been @@ -99,6 +109,7 @@ SOF_TIMESTAMPING_TX_ACK: over-report measurement, because the timestamp is generated when all data up to and including the buffer at send() was acknowledged: the cumulative acknowledgment. The mechanism ignores SACK and FACK. + This flag can be enabled via both socket options and control messages. 1.3.2 Timestamp Reporting @@ -183,6 +194,37 @@ having access to the contents of the original packet, so cannot be combined with SOF_TIMESTAMPING_OPT_TSONLY. +1.3.4. Enabling timestamps via control messages + +In addition to socket options, timestamp generation can be requested +per write via cmsg, only for SOF_TIMESTAMPING_TX_* (see Section 1.3.1). +Using this feature, applications can sample timestamps per sendmsg() +without paying the overhead of enabling and disabling timestamps via +setsockopt: + + struct msghdr *msg; + ... + cmsg = CMSG_FIRSTHDR(msg); + cmsg->cmsg_level = SOL_SOCKET; + cmsg->cmsg_type = SO_TIMESTAMPING; + cmsg->cmsg_len = CMSG_LEN(sizeof(__u32)); + *((__u32 *) CMSG_DATA(cmsg)) = SOF_TIMESTAMPING_TX_SCHED | + SOF_TIMESTAMPING_TX_SOFTWARE | + SOF_TIMESTAMPING_TX_ACK; + err = sendmsg(fd, msg, 0); + +The SOF_TIMESTAMPING_TX_* flags set via cmsg will override +the SOF_TIMESTAMPING_TX_* flags set via setsockopt. + +Moreover, applications must still enable timestamp reporting via +setsockopt to receive timestamps: + + __u32 val = SOF_TIMESTAMPING_SOFTWARE | + SOF_TIMESTAMPING_OPT_ID /* or any other flag */; + err = setsockopt(fd, SOL_SOCKET, SO_TIMESTAMPING, (void *) val, + sizeof(val)); + + 1.4 Bytestream Timestamps The SO_TIMESTAMPING interface supports timestamping of bytes in a diff --git a/Documentation/phy.txt b/Documentation/phy.txt index b388c5af9e72..0aa994bd9a91 100644 --- a/Documentation/phy.txt +++ b/Documentation/phy.txt @@ -31,16 +31,28 @@ should provide its own implementation of of_xlate. of_xlate is used only for dt boot case. #define of_phy_provider_register(dev, xlate) \ - __of_phy_provider_register((dev), THIS_MODULE, (xlate)) + __of_phy_provider_register((dev), NULL, THIS_MODULE, (xlate)) #define devm_of_phy_provider_register(dev, xlate) \ - __devm_of_phy_provider_register((dev), THIS_MODULE, (xlate)) + __devm_of_phy_provider_register((dev), NULL, THIS_MODULE, (xlate)) of_phy_provider_register and devm_of_phy_provider_register macros can be used to register the phy_provider and it takes device and of_xlate as arguments. For the dt boot case, all PHY providers should use one of the above 2 macros to register the PHY provider. +Often the device tree nodes associated with a PHY provider will contain a set +of children that each represent a single PHY. Some bindings may nest the child +nodes within extra levels for context and extensibility, in which case the low +level of_phy_provider_register_full() and devm_of_phy_provider_register_full() +macros can be used to override the node containing the children. + +#define of_phy_provider_register_full(dev, children, xlate) \ + __of_phy_provider_register(dev, children, THIS_MODULE, xlate) + +#define devm_of_phy_provider_register_full(dev, children, xlate) \ + __devm_of_phy_provider_register_full(dev, children, THIS_MODULE, xlate) + void devm_of_phy_provider_unregister(struct device *dev, struct phy_provider *phy_provider); void of_phy_provider_unregister(struct phy_provider *phy_provider); diff --git a/Documentation/powerpc/eeh-pci-error-recovery.txt b/Documentation/powerpc/eeh-pci-error-recovery.txt index 9d4e33df624c..678189280bb4 100644 --- a/Documentation/powerpc/eeh-pci-error-recovery.txt +++ b/Documentation/powerpc/eeh-pci-error-recovery.txt @@ -12,7 +12,7 @@ Overview: The IBM POWER-based pSeries and iSeries computers include PCI bus controller chips that have extended capabilities for detecting and reporting a large variety of PCI bus error conditions. These features -go under the name of "EEH", for "Extended Error Handling". The EEH +go under the name of "EEH", for "Enhanced Error Handling". The EEH hardware features allow PCI bus errors to be cleared and a PCI card to be "rebooted", without also having to reboot the operating system. diff --git a/Documentation/pps/pps.txt b/Documentation/pps/pps.txt index 7cb7264ad598..50022b3c8ebf 100644 --- a/Documentation/pps/pps.txt +++ b/Documentation/pps/pps.txt @@ -98,7 +98,7 @@ pps_source_info_s as follows: }; and then calling the function pps_register_source() in your -intialization routine as follows: +initialization routine as follows: source = pps_register_source(&pps_ktimer_info, PPS_CAPTUREASSERT | PPS_OFFSETASSERT); diff --git a/Documentation/pwm.txt b/Documentation/pwm.txt index ca895fd211e4..789b27c6ec99 100644 --- a/Documentation/pwm.txt +++ b/Documentation/pwm.txt @@ -42,9 +42,26 @@ variants of these functions, devm_pwm_get() and devm_pwm_put(), also exist. After being requested, a PWM has to be configured using: -int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns); +int pwm_apply_state(struct pwm_device *pwm, struct pwm_state *state); -To start/stop toggling the PWM output use pwm_enable()/pwm_disable(). +This API controls both the PWM period/duty_cycle config and the +enable/disable state. + +The pwm_config(), pwm_enable() and pwm_disable() functions are just wrappers +around pwm_apply_state() and should not be used if the user wants to change +several parameter at once. For example, if you see pwm_config() and +pwm_{enable,disable}() calls in the same function, this probably means you +should switch to pwm_apply_state(). + +The PWM user API also allows one to query the PWM state with pwm_get_state(). + +In addition to the PWM state, the PWM API also exposes PWM arguments, which +are the reference PWM config one should use on this PWM. +PWM arguments are usually platform-specific and allows the PWM user to only +care about dutycycle relatively to the full period (like, duty = 50% of the +period). struct pwm_args contains 2 fields (period and polarity) and should +be used to set the initial PWM config (usually done in the probe function +of the PWM user). PWM arguments are retrieved with pwm_get_args(). Using PWMs with the sysfs interface ----------------------------------- @@ -105,6 +122,15 @@ goes low for the remainder of the period. Conversely, a signal with inversed polarity starts low for the duration of the duty cycle and goes high for the remainder of the period. +Drivers are encouraged to implement ->apply() instead of the legacy +->enable(), ->disable() and ->config() methods. Doing that should provide +atomicity in the PWM config workflow, which is required when the PWM controls +a critical device (like a regulator). + +The implementation of ->get_state() (a method used to retrieve initial PWM +state) is also encouraged for the same reason: letting the PWM user know +about the current PWM state would allow him to avoid glitches. + Locking ------- diff --git a/Documentation/robust-futexes.txt b/Documentation/robust-futexes.txt index af6fce23e484..61c22d608759 100644 --- a/Documentation/robust-futexes.txt +++ b/Documentation/robust-futexes.txt @@ -126,9 +126,9 @@ vma based method: - no VM changes are needed - 'struct address_space' is left alone. - - no registration of individual locks is needed: robust mutexes dont + - no registration of individual locks is needed: robust mutexes don't need any extra per-lock syscalls. Robust mutexes thus become a very - lightweight primitive - so they dont force the application designer + lightweight primitive - so they don't force the application designer to do a hard choice between performance and robustness - robust mutexes are just as fast. @@ -202,7 +202,7 @@ and the remaining bits are for the TID. Testing, architecture support ----------------------------- -i've tested the new syscalls on x86 and x86_64, and have made sure the +I've tested the new syscalls on x86 and x86_64, and have made sure the parsing of the userspace list is robust [ ;-) ] even if the list is deliberately corrupted. diff --git a/Documentation/rpmsg.txt b/Documentation/rpmsg.txt index f7edc3aa1e92..a95e36a43288 100644 --- a/Documentation/rpmsg.txt +++ b/Documentation/rpmsg.txt @@ -249,24 +249,12 @@ MODULE_DEVICE_TABLE(rpmsg, rpmsg_driver_sample_id_table); static struct rpmsg_driver rpmsg_sample_client = { .drv.name = KBUILD_MODNAME, - .drv.owner = THIS_MODULE, .id_table = rpmsg_driver_sample_id_table, .probe = rpmsg_sample_probe, .callback = rpmsg_sample_cb, .remove = rpmsg_sample_remove, }; - -static int __init init(void) -{ - return register_rpmsg_driver(&rpmsg_sample_client); -} -module_init(init); - -static void __exit fini(void) -{ - unregister_rpmsg_driver(&rpmsg_sample_client); -} -module_exit(fini); +module_rpmsg_driver(rpmsg_sample_client); Note: a similar sample which can be built and loaded can be found in samples/rpmsg/. diff --git a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas index 18b570990040..00ffdf187f0b 100644 --- a/Documentation/scsi/ChangeLog.megaraid_sas +++ b/Documentation/scsi/ChangeLog.megaraid_sas @@ -63,7 +63,7 @@ Release Date : Sat. Feb 9, 2013 17:00:00 PST 2013 - Current Version : 06.506.00.00-rc1 Old Version : 06.504.01.00-rc1 1. Add 4k FastPath DIF support. - 2. Dont load DevHandle unless FastPath enabled. + 2. Don't load DevHandle unless FastPath enabled. 3. Version and Changelog update. ------------------------------------------------------------------------------- Release Date : Mon. Oct 1, 2012 17:00:00 PST 2012 - @@ -105,7 +105,7 @@ Old Version : 00.00.06.12-rc1 1. Fix reglockFlags for degraded raid5/6 for MR 9360/9380. 2. Mask off flags in ioctl path to prevent memory scribble with older MegaCLI versions. - 3. Remove poll_mode_io module paramater, sysfs node, and associated code. + 3. Remove poll_mode_io module parameter, sysfs node, and associated code. ------------------------------------------------------------------------------- Release Date : Wed. Oct 5, 2011 17:00:00 PST 2010 - (emaild-id:megaraidlinux@lsi.com) @@ -199,7 +199,7 @@ Old Version : 00.00.04.31-rc1 1. Add the Online Controller Reset (OCR) to the Driver. OCR is the new feature for megaraid_sas driver which will allow the fw to do the chip reset which will not - affact the OS behavious. + affect the OS behavior. To add the OCR support, driver need to do: a). reset the controller chips -- Xscale and Gen2 which @@ -233,7 +233,7 @@ Old Version : 00.00.04.31-rc1 failed state. Driver will kill adapter if can't bring back FW after the this three times reset. 4. Add the input parameter max_sectors to 1MB support to our GEN2 controller. - customer can use the input paramenter max_sectors to add 1MB support to GEN2 + customer can use the input parameter max_sectors to add 1MB support to GEN2 controller. 1 Release Date : Thur. Oct 29, 2009 09:12:45 PST 2009 - @@ -582,11 +582,11 @@ ii. Bug fix : Disable controller interrupt before firing INIT cmd to FW. 1 Release Date : Wed Feb 03 14:31:44 PST 2006 - Sumant Patro <Sumant.Patro@lsil.com> 2 Current Version : 00.00.02.04 -3 Older Version : 00.00.02.04 +3 Older Version : 00.00.02.04 -i. Remove superflous instance_lock +i. Remove superfluous instance_lock - gets rid of the otherwise superflous instance_lock and avoids an unsave + gets rid of the otherwise superfluous instance_lock and avoids an unsafe unsynchronized access in the error handler. - Christoph Hellwig <hch@lst.de> @@ -594,43 +594,43 @@ i. Remove superflous instance_lock 1 Release Date : Wed Feb 03 14:31:44 PST 2006 - Sumant Patro <Sumant.Patro@lsil.com> 2 Current Version : 00.00.02.04 -3 Older Version : 00.00.02.04 +3 Older Version : 00.00.02.04 i. Support for 1078 type (ppc IOP) controller, device id : 0x60 added. - During initialization, depending on the device id, the template members - are initialized with function pointers specific to the ppc or - xscale controllers. + During initialization, depending on the device id, the template members + are initialized with function pointers specific to the ppc or + xscale controllers. -Sumant Patro <Sumant.Patro@lsil.com> -1 Release Date : Fri Feb 03 14:16:25 PST 2006 - Sumant Patro +1 Release Date : Fri Feb 03 14:16:25 PST 2006 - Sumant Patro <Sumant.Patro@lsil.com> 2 Current Version : 00.00.02.04 -3 Older Version : 00.00.02.02 -i. Register 16 byte CDB capability with scsi midlayer +3 Older Version : 00.00.02.02 +i. Register 16 byte CDB capability with scsi midlayer - "This patch properly registers the 16 byte command length capability of the - megaraid_sas controlled hardware with the scsi midlayer. All megaraid_sas + "This patch properly registers the 16 byte command length capability of the + megaraid_sas controlled hardware with the scsi midlayer. All megaraid_sas hardware supports 16 byte CDB's." - -Joshua Giles <joshua_giles@dell.com> + -Joshua Giles <joshua_giles@dell.com> 1 Release Date : Mon Jan 23 14:09:01 PST 2006 - Sumant Patro <Sumant.Patro@lsil.com> 2 Current Version : 00.00.02.02 -3 Older Version : 00.00.02.01 +3 Older Version : 00.00.02.01 -i. New template defined to represent each family of controllers (identified by processor used). - The template will have defintions that will be initialised to appropritae values for a specific family of controllers. The template definition has four function pointers. During driver initialisation the function pointers will be set based on the controller family type. This change is done to support new controllers that has different processors and thus different register set. +i. New template defined to represent each family of controllers (identified by processor used). + The template will have definitions that will be initialised to appropriate values for a specific family of controllers. The template definition has four function pointers. During driver initialisation the function pointers will be set based on the controller family type. This change is done to support new controllers that has different processors and thus different register set. -Sumant Patro <Sumant.Patro@lsil.com> 1 Release Date : Mon Dec 19 14:36:26 PST 2005 - Sumant Patro <Sumant.Patro@lsil.com> -2 Current Version : 00.00.02.00-rc4 -3 Older Version : 00.00.02.01 +2 Current Version : 00.00.02.00-rc4 +3 Older Version : 00.00.02.01 -i. Code reorganized to remove code duplication in megasas_build_cmd. +i. Code reorganized to remove code duplication in megasas_build_cmd. - "There's a lot of duplicate code megasas_build_cmd. Move that out of the different codepathes and merge the reminder of megasas_build_cmd into megasas_queue_command" + "There's a lot of duplicate code megasas_build_cmd. Move that out of the different codepaths and merge the reminder of megasas_build_cmd into megasas_queue_command" - Christoph Hellwig <hch@lst.de> diff --git a/Documentation/scsi/bfa.txt b/Documentation/scsi/bfa.txt index f2d6e9d1791e..3cc4d80d6092 100644 --- a/Documentation/scsi/bfa.txt +++ b/Documentation/scsi/bfa.txt @@ -50,7 +50,7 @@ be found at: http://www.brocade.com/services-support/drivers-downloads/adapters/Linux.page -and then click following respective util pacakge link +and then click following respective util package link Version Link diff --git a/Documentation/scsi/g_NCR5380.txt b/Documentation/scsi/g_NCR5380.txt index 3b80f567f818..fd880150aeea 100644 --- a/Documentation/scsi/g_NCR5380.txt +++ b/Documentation/scsi/g_NCR5380.txt @@ -23,11 +23,10 @@ supported by the driver. If the default configuration does not work for you, you can use the kernel command lines (eg using the lilo append command): - ncr5380=port,irq,dma - ncr53c400=port,irq -or - ncr5380=base,irq,dma - ncr53c400=base,irq + ncr5380=addr,irq + ncr53c400=addr,irq + ncr53c400a=addr,irq + dtc3181e=addr,irq The driver does not probe for any addresses or ports other than those in the OVERRIDE or given to the kernel as above. @@ -36,19 +35,17 @@ This driver provides some information on what it has detected in /proc/scsi/g_NCR5380/x where x is the scsi card number as detected at boot time. More info to come in the future. -When NCR53c400 support is compiled in, BIOS parameters will be returned by -the driver (the raw 5380 driver does not and I don't plan to fiddle with -it!). - This driver works as a module. When included as a module, parameters can be passed on the insmod/modprobe command line: ncr_irq=xx the interrupt ncr_addr=xx the port or base address (for port or memory mapped, resp.) - ncr_dma=xx the DMA ncr_5380=1 to set up for a NCR5380 board ncr_53c400=1 to set up for a NCR53C400 board + ncr_53c400a=1 to set up for a NCR53C400A board + dtc_3181e=1 to set up for a Domex Technology Corp 3181E board + hp_c2502=1 to set up for a Hewlett Packard C2502 board e.g. modprobe g_NCR5380 ncr_irq=5 ncr_addr=0x350 ncr_5380=1 for a port mapped NCR5380 board or diff --git a/Documentation/scsi/scsi-parameters.txt b/Documentation/scsi/scsi-parameters.txt index 2bfd6f6d2d3d..1241ac11edb1 100644 --- a/Documentation/scsi/scsi-parameters.txt +++ b/Documentation/scsi/scsi-parameters.txt @@ -27,13 +27,15 @@ parameters may be changed at runtime by the command aic79xx= [HW,SCSI] See Documentation/scsi/aic79xx.txt. - atascsi= [HW,SCSI] Atari SCSI + atascsi= [HW,SCSI] + See drivers/scsi/atari_scsi.c. BusLogic= [HW,SCSI] See drivers/scsi/BusLogic.c, comment before function BusLogic_ParseDriverOptions(). dtc3181e= [HW,SCSI] + See Documentation/scsi/g_NCR5380.txt. eata= [HW,SCSI] @@ -51,8 +53,8 @@ parameters may be changed at runtime by the command ips= [HW,SCSI] Adaptec / IBM ServeRAID controller See header of drivers/scsi/ips.c. - mac5380= [HW,SCSI] Format: - <can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags> + mac5380= [HW,SCSI] + See drivers/scsi/mac_scsi.c. max_luns= [SCSI] Maximum number of LUNs to probe. Should be between 1 and 2^32-1. @@ -65,10 +67,13 @@ parameters may be changed at runtime by the command See header of drivers/scsi/NCR_D700.c. ncr5380= [HW,SCSI] + See Documentation/scsi/g_NCR5380.txt. ncr53c400= [HW,SCSI] + See Documentation/scsi/g_NCR5380.txt. ncr53c400a= [HW,SCSI] + See Documentation/scsi/g_NCR5380.txt. ncr53c406a= [HW,SCSI] diff --git a/Documentation/security/LoadPin.txt b/Documentation/security/LoadPin.txt new file mode 100644 index 000000000000..e11877f5d3d4 --- /dev/null +++ b/Documentation/security/LoadPin.txt @@ -0,0 +1,17 @@ +LoadPin is a Linux Security Module that ensures all kernel-loaded files +(modules, firmware, etc) all originate from the same filesystem, with +the expectation that such a filesystem is backed by a read-only device +such as dm-verity or CDROM. This allows systems that have a verified +and/or unchangeable filesystem to enforce module and firmware loading +restrictions without needing to sign the files individually. + +The LSM is selectable at build-time with CONFIG_SECURITY_LOADPIN, and +can be controlled at boot-time with the kernel command line option +"loadpin.enabled". By default, it is enabled, but can be disabled at +boot ("loadpin.enabled=0"). + +LoadPin starts pinning when it sees the first file loaded. If the +block device backing the filesystem is not read-only, a sysctl is +created to toggle pinning: /proc/sys/kernel/loadpin/enabled. (Having +a mutable filesystem means pinning is mutable too, but having the +sysctl allows for easy testing on systems with a mutable filesystem.) diff --git a/Documentation/security/keys.txt b/Documentation/security/keys.txt index 8c183873b2b7..20d05719bceb 100644 --- a/Documentation/security/keys.txt +++ b/Documentation/security/keys.txt @@ -823,6 +823,36 @@ The keyctl syscall functions are: A process must have search permission on the key for this function to be successful. + (*) Compute a Diffie-Hellman shared secret or public key + + long keyctl(KEYCTL_DH_COMPUTE, struct keyctl_dh_params *params, + char *buffer, size_t buflen); + + The params struct contains serial numbers for three keys: + + - The prime, p, known to both parties + - The local private key + - The base integer, which is either a shared generator or the + remote public key + + The value computed is: + + result = base ^ private (mod prime) + + If the base is the shared generator, the result is the local + public key. If the base is the remote public key, the result is + the shared secret. + + The buffer length must be at least the length of the prime, or zero. + + If the buffer length is nonzero, the length of the result is + returned when it is successfully calculated and copied in to the + buffer. When the buffer length is zero, the minimum required + buffer length is returned. + + This function will return error EOPNOTSUPP if the key type is not + supported, error ENOKEY if the key could not be found, or error + EACCES if the key is not readable by the caller. =============== KERNEL SERVICES @@ -999,6 +1029,10 @@ payload contents" for more information. struct key *keyring_alloc(const char *description, uid_t uid, gid_t gid, const struct cred *cred, key_perm_t perm, + int (*restrict_link)(struct key *, + const struct key_type *, + unsigned long, + const union key_payload *), unsigned long flags, struct key *dest); @@ -1010,6 +1044,24 @@ payload contents" for more information. KEY_ALLOC_NOT_IN_QUOTA in flags if the keyring shouldn't be accounted towards the user's quota). Error ENOMEM can also be returned. + If restrict_link not NULL, it should point to a function that will be + called each time an attempt is made to link a key into the new keyring. + This function is called to check whether a key may be added into the keying + or not. Callers of key_create_or_update() within the kernel can pass + KEY_ALLOC_BYPASS_RESTRICTION to suppress the check. An example of using + this is to manage rings of cryptographic keys that are set up when the + kernel boots where userspace is also permitted to add keys - provided they + can be verified by a key the kernel already has. + + When called, the restriction function will be passed the keyring being + added to, the key flags value and the type and payload of the key being + added. Note that when a new key is being created, this is called between + payload preparsing and actual key creation. The function should return 0 + to allow the link or an error to reject it. + + A convenience function, restrict_link_reject, exists to always return + -EPERM to in this case. + (*) To check the validity of a key, this function can be called: diff --git a/Documentation/security/self-protection.txt b/Documentation/security/self-protection.txt new file mode 100644 index 000000000000..babd6378ec05 --- /dev/null +++ b/Documentation/security/self-protection.txt @@ -0,0 +1,261 @@ +# Kernel Self-Protection + +Kernel self-protection is the design and implementation of systems and +structures within the Linux kernel to protect against security flaws in +the kernel itself. This covers a wide range of issues, including removing +entire classes of bugs, blocking security flaw exploitation methods, +and actively detecting attack attempts. Not all topics are explored in +this document, but it should serve as a reasonable starting point and +answer any frequently asked questions. (Patches welcome, of course!) + +In the worst-case scenario, we assume an unprivileged local attacker +has arbitrary read and write access to the kernel's memory. In many +cases, bugs being exploited will not provide this level of access, +but with systems in place that defend against the worst case we'll +cover the more limited cases as well. A higher bar, and one that should +still be kept in mind, is protecting the kernel against a _privileged_ +local attacker, since the root user has access to a vastly increased +attack surface. (Especially when they have the ability to load arbitrary +kernel modules.) + +The goals for successful self-protection systems would be that they +are effective, on by default, require no opt-in by developers, have no +performance impact, do not impede kernel debugging, and have tests. It +is uncommon that all these goals can be met, but it is worth explicitly +mentioning them, since these aspects need to be explored, dealt with, +and/or accepted. + + +## Attack Surface Reduction + +The most fundamental defense against security exploits is to reduce the +areas of the kernel that can be used to redirect execution. This ranges +from limiting the exposed APIs available to userspace, making in-kernel +APIs hard to use incorrectly, minimizing the areas of writable kernel +memory, etc. + +### Strict kernel memory permissions + +When all of kernel memory is writable, it becomes trivial for attacks +to redirect execution flow. To reduce the availability of these targets +the kernel needs to protect its memory with a tight set of permissions. + +#### Executable code and read-only data must not be writable + +Any areas of the kernel with executable memory must not be writable. +While this obviously includes the kernel text itself, we must consider +all additional places too: kernel modules, JIT memory, etc. (There are +temporary exceptions to this rule to support things like instruction +alternatives, breakpoints, kprobes, etc. If these must exist in a +kernel, they are implemented in a way where the memory is temporarily +made writable during the update, and then returned to the original +permissions.) + +In support of this are (the poorly named) CONFIG_DEBUG_RODATA and +CONFIG_DEBUG_SET_MODULE_RONX, which seek to make sure that code is not +writable, data is not executable, and read-only data is neither writable +nor executable. + +#### Function pointers and sensitive variables must not be writable + +Vast areas of kernel memory contain function pointers that are looked +up by the kernel and used to continue execution (e.g. descriptor/vector +tables, file/network/etc operation structures, etc). The number of these +variables must be reduced to an absolute minimum. + +Many such variables can be made read-only by setting them "const" +so that they live in the .rodata section instead of the .data section +of the kernel, gaining the protection of the kernel's strict memory +permissions as described above. + +For variables that are initialized once at __init time, these can +be marked with the (new and under development) __ro_after_init +attribute. + +What remains are variables that are updated rarely (e.g. GDT). These +will need another infrastructure (similar to the temporary exceptions +made to kernel code mentioned above) that allow them to spend the rest +of their lifetime read-only. (For example, when being updated, only the +CPU thread performing the update would be given uninterruptible write +access to the memory.) + +#### Segregation of kernel memory from userspace memory + +The kernel must never execute userspace memory. The kernel must also never +access userspace memory without explicit expectation to do so. These +rules can be enforced either by support of hardware-based restrictions +(x86's SMEP/SMAP, ARM's PXN/PAN) or via emulation (ARM's Memory Domains). +By blocking userspace memory in this way, execution and data parsing +cannot be passed to trivially-controlled userspace memory, forcing +attacks to operate entirely in kernel memory. + +### Reduced access to syscalls + +One trivial way to eliminate many syscalls for 64-bit systems is building +without CONFIG_COMPAT. However, this is rarely a feasible scenario. + +The "seccomp" system provides an opt-in feature made available to +userspace, which provides a way to reduce the number of kernel entry +points available to a running process. This limits the breadth of kernel +code that can be reached, possibly reducing the availability of a given +bug to an attack. + +An area of improvement would be creating viable ways to keep access to +things like compat, user namespaces, BPF creation, and perf limited only +to trusted processes. This would keep the scope of kernel entry points +restricted to the more regular set of normally available to unprivileged +userspace. + +### Restricting access to kernel modules + +The kernel should never allow an unprivileged user the ability to +load specific kernel modules, since that would provide a facility to +unexpectedly extend the available attack surface. (The on-demand loading +of modules via their predefined subsystems, e.g. MODULE_ALIAS_*, is +considered "expected" here, though additional consideration should be +given even to these.) For example, loading a filesystem module via an +unprivileged socket API is nonsense: only the root or physically local +user should trigger filesystem module loading. (And even this can be up +for debate in some scenarios.) + +To protect against even privileged users, systems may need to either +disable module loading entirely (e.g. monolithic kernel builds or +modules_disabled sysctl), or provide signed modules (e.g. +CONFIG_MODULE_SIG_FORCE, or dm-crypt with LoadPin), to keep from having +root load arbitrary kernel code via the module loader interface. + + +## Memory integrity + +There are many memory structures in the kernel that are regularly abused +to gain execution control during an attack, By far the most commonly +understood is that of the stack buffer overflow in which the return +address stored on the stack is overwritten. Many other examples of this +kind of attack exist, and protections exist to defend against them. + +### Stack buffer overflow + +The classic stack buffer overflow involves writing past the expected end +of a variable stored on the stack, ultimately writing a controlled value +to the stack frame's stored return address. The most widely used defense +is the presence of a stack canary between the stack variables and the +return address (CONFIG_CC_STACKPROTECTOR), which is verified just before +the function returns. Other defenses include things like shadow stacks. + +### Stack depth overflow + +A less well understood attack is using a bug that triggers the +kernel to consume stack memory with deep function calls or large stack +allocations. With this attack it is possible to write beyond the end of +the kernel's preallocated stack space and into sensitive structures. Two +important changes need to be made for better protections: moving the +sensitive thread_info structure elsewhere, and adding a faulting memory +hole at the bottom of the stack to catch these overflows. + +### Heap memory integrity + +The structures used to track heap free lists can be sanity-checked during +allocation and freeing to make sure they aren't being used to manipulate +other memory areas. + +### Counter integrity + +Many places in the kernel use atomic counters to track object references +or perform similar lifetime management. When these counters can be made +to wrap (over or under) this traditionally exposes a use-after-free +flaw. By trapping atomic wrapping, this class of bug vanishes. + +### Size calculation overflow detection + +Similar to counter overflow, integer overflows (usually size calculations) +need to be detected at runtime to kill this class of bug, which +traditionally leads to being able to write past the end of kernel buffers. + + +## Statistical defenses + +While many protections can be considered deterministic (e.g. read-only +memory cannot be written to), some protections provide only statistical +defense, in that an attack must gather enough information about a +running system to overcome the defense. While not perfect, these do +provide meaningful defenses. + +### Canaries, blinding, and other secrets + +It should be noted that things like the stack canary discussed earlier +are technically statistical defenses, since they rely on a (leakable) +secret value. + +Blinding literal values for things like JITs, where the executable +contents may be partially under the control of userspace, need a similar +secret value. + +It is critical that the secret values used must be separate (e.g. +different canary per stack) and high entropy (e.g. is the RNG actually +working?) in order to maximize their success. + +### Kernel Address Space Layout Randomization (KASLR) + +Since the location of kernel memory is almost always instrumental in +mounting a successful attack, making the location non-deterministic +raises the difficulty of an exploit. (Note that this in turn makes +the value of leaks higher, since they may be used to discover desired +memory locations.) + +#### Text and module base + +By relocating the physical and virtual base address of the kernel at +boot-time (CONFIG_RANDOMIZE_BASE), attacks needing kernel code will be +frustrated. Additionally, offsetting the module loading base address +means that even systems that load the same set of modules in the same +order every boot will not share a common base address with the rest of +the kernel text. + +#### Stack base + +If the base address of the kernel stack is not the same between processes, +or even not the same between syscalls, targets on or beyond the stack +become more difficult to locate. + +#### Dynamic memory base + +Much of the kernel's dynamic memory (e.g. kmalloc, vmalloc, etc) ends up +being relatively deterministic in layout due to the order of early-boot +initializations. If the base address of these areas is not the same +between boots, targeting them is frustrated, requiring a leak specific +to the region. + + +## Preventing Leaks + +Since the locations of sensitive structures are the primary target for +attacks, it is important to defend against leaks of both kernel memory +addresses and kernel memory contents (since they may contain kernel +addresses or other sensitive things like canary values). + +### Unique identifiers + +Kernel memory addresses must never be used as identifiers exposed to +userspace. Instead, use an atomic counter, an idr, or similar unique +identifier. + +### Memory initialization + +Memory copied to userspace must always be fully initialized. If not +explicitly memset(), this will require changes to the compiler to make +sure structure holes are cleared. + +### Memory poisoning + +When releasing memory, it is best to poison the contents (clear stack on +syscall return, wipe heap memory on a free), to avoid reuse attacks that +rely on the old contents of memory. This frustrates many uninitialized +variable attacks, stack info leaks, heap info leaks, and use-after-free +attacks. + +### Destination tracking + +To help kill classes of bugs that result in kernel addresses being +written to userspace, the destination of writes needs to be tracked. If +the buffer is destined for userspace (e.g. seq_file backed /proc files), +it should automatically censor sensitive values. diff --git a/Documentation/serial/driver b/Documentation/serial/driver index 379468e12680..da193e092fc3 100644 --- a/Documentation/serial/driver +++ b/Documentation/serial/driver @@ -28,7 +28,7 @@ The serial core provides a few helper functions. This includes identifing the correct port structure (via uart_get_console) and decoding command line arguments (uart_parse_options). -There is also a helper function (uart_write_console) which performs a +There is also a helper function (uart_console_write) which performs a character by character write, translating newlines to CRLF sequences. Driver writers are recommended to use this function rather than implementing their own version. @@ -41,27 +41,23 @@ It is the responsibility of the low level hardware driver to perform the necessary locking using port->lock. There are some exceptions (which are described in the uart_ops listing below.) -There are three locks. A per-port spinlock, a per-port tmpbuf semaphore, -and an overall semaphore. +There are two locks. A per-port spinlock, and an overall semaphore. From the core driver perspective, the port->lock locks the following data: port->mctrl port->icount - info->xmit.head (circ->head) - info->xmit.tail (circ->tail) + port->state->xmit.head (circ_buf->head) + port->state->xmit.tail (circ_buf->tail) The low level driver is free to use this lock to provide any additional locking. -The core driver uses the info->tmpbuf_sem lock to prevent multi-threaded -access to the info->tmpbuf bouncebuffer used for port writes. - The port_sem semaphore is used to protect against ports being added/ removed or reconfigured at inappropriate times. Since v2.6.27, this semaphore has been the 'mutex' member of the tty_port struct, and -commonly referred to as the port mutex (or port->mutex). +commonly referred to as the port mutex. uart_ops @@ -135,6 +131,24 @@ hardware. Interrupts: locally disabled. This call must not sleep + throttle(port) + Notify the serial driver that input buffers for the line discipline are + close to full, and it should somehow signal that no more characters + should be sent to the serial port. + This will be called only if hardware assisted flow control is enabled. + + Locking: serialized with .unthrottle() and termios modification by the + tty layer. + + unthrottle(port) + Notify the serial driver that characters can now be sent to the serial + port without fear of overrunning the input buffers of the line + disciplines. + This will be called only if hardware assisted flow control is enabled. + + Locking: serialized with .throttle() and termios modification by the + tty layer. + send_xchar(port,ch) Transmit a high priority character, even if the port is stopped. This is used to implement XON/XOFF flow control and tcflow(). If @@ -172,9 +186,7 @@ hardware. should be terminated when another call is made with a zero ctl. - Locking: none. - Interrupts: caller dependent. - This call must not sleep + Locking: caller holds tty_port->mutex startup(port) Grab any interrupt resources and initialise any low level driver @@ -192,7 +204,7 @@ hardware. RTS nor DTR; this will have already been done via a separate call to set_mctrl. - Drivers must not access port->info once this call has completed. + Drivers must not access port->state once this call has completed. This method will only be called when there are no more users of this port. @@ -204,7 +216,7 @@ hardware. Flush any write buffers, reset any DMA state and stop any ongoing DMA transfers. - This will be called whenever the port->info->xmit circular + This will be called whenever the port->state->xmit circular buffer is cleared. Locking: port->lock taken. @@ -250,10 +262,15 @@ hardware. Other flags may be used (eg, xon/xoff characters) if your hardware supports hardware "soft" flow control. - Locking: caller holds port->mutex + Locking: caller holds tty_port->mutex Interrupts: caller dependent. This call must not sleep + set_ldisc(port,termios) + Notifier for discipline change. See Documentation/serial/tty.txt. + + Locking: caller holds tty_port->mutex + pm(port,state,oldstate) Perform any power management related activities on the specified port. State indicates the new state (defined by @@ -371,7 +388,7 @@ uart_get_baud_rate(port,termios,old,min,max) Interrupts: n/a uart_get_divisor(port,baud) - Return the divsor (baud_base / baud) for the specified baud + Return the divisor (baud_base / baud) for the specified baud rate, appropriately rounded. If 38400 baud and custom divisor is selected, return the @@ -449,11 +466,12 @@ mctrl_gpio_init(port, idx): mctrl_gpio_free(dev, gpios): This will free the requested gpios in mctrl_gpio_init(). - As devm_* function are used, there's generally no need to call + As devm_* functions are used, there's generally no need to call this function. mctrl_gpio_to_gpiod(gpios, gidx) - This returns the gpio structure associated to the modem line index. + This returns the gpio_desc structure associated to the modem line + index. mctrl_gpio_set(gpios, mctrl): This will sets the gpios according to the mctrl state. diff --git a/Documentation/serial/tty.txt b/Documentation/serial/tty.txt index 798cba82c762..b48780977a68 100644 --- a/Documentation/serial/tty.txt +++ b/Documentation/serial/tty.txt @@ -210,9 +210,6 @@ TTY_IO_ERROR If set, causes all subsequent userspace read/write TTY_OTHER_CLOSED Device is a pty and the other side has closed. -TTY_OTHER_DONE Device is a pty and the other side has closed and - all pending input processing has been completed. - TTY_NO_WRITE_SPLIT Prevent driver from splitting up writes into smaller chunks. diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt index e7193aac669c..d4510ebf2e8c 100644 --- a/Documentation/sound/alsa/HD-Audio.txt +++ b/Documentation/sound/alsa/HD-Audio.txt @@ -655,17 +655,6 @@ development branches in general while the development for the current and next kernels are found in for-linus and for-next branches, respectively. -If you are using the latest Linus tree, it'd be better to pull the -above GIT tree onto it. If you are using the older kernels, an easy -way to try the latest ALSA code is to build from the snapshot -tarball. There are daily tarballs and the latest snapshot tarball. -All can be built just like normal alsa-driver release packages, that -is, installed via the usual spells: configure, make and make -install(-modules). See INSTALL in the package. The snapshot tarballs -are found at: - -- ftp://ftp.suse.com/pub/people/tiwai/snapshot/ - Sending a Bug Report ~~~~~~~~~~~~~~~~~~~~ @@ -699,7 +688,12 @@ problems. alsa-info ~~~~~~~~~ The script `alsa-info.sh` is a very useful tool to gather the audio -device information. You can fetch the latest version from: +device information. It's included in alsa-utils package. The latest +version can be found on git repository: + +- git://git.alsa-project.org/alsa-utils.git + +The script can be fetched directly from the following URL, too: - http://www.alsa-project.org/alsa-info.sh @@ -836,15 +830,11 @@ can get a proc-file dump at the current state, get a list of control (mixer) elements, set/get the control element value, simulate the PCM operation, the jack plugging simulation, etc. -The package is found in: - -- ftp://ftp.suse.com/pub/people/tiwai/misc/ - -A git repository is available: +The program is found in the git repository below: - git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/hda-emu.git -See README file in the tarball for more details about hda-emu +See README file in the repository for more details about hda-emu program. diff --git a/Documentation/sound/alsa/compress_offload.txt b/Documentation/sound/alsa/compress_offload.txt index 630c492c3dc2..8ba556a131c3 100644 --- a/Documentation/sound/alsa/compress_offload.txt +++ b/Documentation/sound/alsa/compress_offload.txt @@ -149,7 +149,7 @@ Gapless Playback ================ When playing thru an album, the decoders have the ability to skip the encoder delay and padding and directly move from one track content to another. The end -user can perceive this as gapless playback as we dont have silence while +user can perceive this as gapless playback as we don't have silence while switching from one track to another Also, there might be low-intensity noises due to encoding. Perfect gapless is @@ -184,7 +184,7 @@ Sequence flow for gapless would be: - Fill data of the first track - Trigger start - User-space finished sending all, -- Indicaite next track data by sending set_next_track +- Indicate next track data by sending set_next_track - Set metadata of the next track - then call partial_drain to flush most of buffer in DSP - Fill data of the next track diff --git a/Documentation/sound/alsa/soc/dapm.txt b/Documentation/sound/alsa/soc/dapm.txt index 6faab4880006..c45bd79f291e 100644 --- a/Documentation/sound/alsa/soc/dapm.txt +++ b/Documentation/sound/alsa/soc/dapm.txt @@ -132,7 +132,7 @@ SOC_DAPM_SINGLE("HiFi Playback Switch", WM8731_APANA, 4, 1, 0), SND_SOC_DAPM_MIXER("Output Mixer", WM8731_PWR, 4, 1, wm8731_output_mixer_controls, ARRAY_SIZE(wm8731_output_mixer_controls)), -If you dont want the mixer elements prefixed with the name of the mixer widget, +If you don't want the mixer elements prefixed with the name of the mixer widget, you can use SND_SOC_DAPM_MIXER_NAMED_CTL instead. the parameters are the same as for SND_SOC_DAPM_MIXER. diff --git a/Documentation/sound/alsa/soc/overview.txt b/Documentation/sound/alsa/soc/overview.txt index ff88f52eec98..f3f28b7ae242 100644 --- a/Documentation/sound/alsa/soc/overview.txt +++ b/Documentation/sound/alsa/soc/overview.txt @@ -63,7 +63,7 @@ multiple re-usable component drivers :- and any audio DSP drivers for that platform. * Machine class driver: The machine driver class acts as the glue that - decribes and binds the other component drivers together to form an ALSA + describes and binds the other component drivers together to form an ALSA "sound card device". It handles any machine specific controls and machine level audio events (e.g. turning on an amp at start of playback). diff --git a/Documentation/sound/alsa/timestamping.txt b/Documentation/sound/alsa/timestamping.txt index 0b191a23f534..1b6473f393a8 100644 --- a/Documentation/sound/alsa/timestamping.txt +++ b/Documentation/sound/alsa/timestamping.txt @@ -129,7 +129,7 @@ will be required to issue multiple queries and perform an interpolation of the results In some hardware-specific configuration, the system timestamp is -latched by a low-level audio subsytem, and the information provided +latched by a low-level audio subsystem, and the information provided back to the driver. Due to potential delays in the communication with the hardware, there is a risk of misalignment with the avail and delay information. To make sure applications are not confused, a diff --git a/Documentation/sync_file.txt b/Documentation/sync_file.txt new file mode 100644 index 000000000000..eaf8297dbca2 --- /dev/null +++ b/Documentation/sync_file.txt @@ -0,0 +1,69 @@ + Sync File API Guide + ~~~~~~~~~~~~~~~~~~~ + + Gustavo Padovan + <gustavo at padovan dot org> + +This document serves as a guide for device drivers writers on what the +sync_file API is, and how drivers can support it. Sync file is the carrier of +the fences(struct fence) that needs to synchronized between drivers or across +process boundaries. + +The sync_file API is meant to be used to send and receive fence information +to/from userspace. It enables userspace to do explicit fencing, where instead +of attaching a fence to the buffer a producer driver (such as a GPU or V4L +driver) sends the fence related to the buffer to userspace via a sync_file. + +The sync_file then can be sent to the consumer (DRM driver for example), that +will not use the buffer for anything before the fence(s) signals, i.e., the +driver that issued the fence is not using/processing the buffer anymore, so it +signals that the buffer is ready to use. And vice-versa for the consumer -> +producer part of the cycle. + +Sync files allows userspace awareness on buffer sharing synchronization between +drivers. + +Sync file was originally added in the Android kernel but current Linux Desktop +can benefit a lot from it. + +in-fences and out-fences +------------------------ + +Sync files can go either to or from userspace. When a sync_file is sent from +the driver to userspace we call the fences it contains 'out-fences'. They are +related to a buffer that the driver is processing or is going to process, so +the driver an create out-fence to be able to notify, through fence_signal(), +when it has finished using (or processing) that buffer. Out-fences are fences +that the driver creates. + +On the other hand if the driver receives fence(s) through a sync_file from +userspace we call these fence(s) 'in-fences'. Receiveing in-fences means that +we need to wait for the fence(s) to signal before using any buffer related to +the in-fences. + +Creating Sync Files +------------------- + +When a driver needs to send an out-fence userspace it creates a sync_file. + +Interface: + struct sync_file *sync_file_create(struct fence *fence); + +The caller pass the out-fence and gets back the sync_file. That is just the +first step, next it needs to install an fd on sync_file->file. So it gets an +fd: + + fd = get_unused_fd_flags(O_CLOEXEC); + +and installs it on sync_file->file: + + fd_install(fd, sync_file->file); + +The sync_file fd now can be sent to userspace. + +If the creation process fail, or the sync_file needs to be released by any +other reason fput(sync_file->file) should be used. + +References: +[1] struct sync_file in include/linux/sync_file.h +[2] All interfaces mentioned above defined in include/linux/sync_file.h diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt index fcddfd5ded99..a3683ce2a2f3 100644 --- a/Documentation/sysctl/kernel.txt +++ b/Documentation/sysctl/kernel.txt @@ -60,6 +60,8 @@ show up in /proc/sys/kernel: - panic_on_warn - perf_cpu_time_max_percent - perf_event_paranoid +- perf_event_max_stack +- perf_event_max_contexts_per_stack - pid_max - powersave-nap [ PPC only ] - printk @@ -654,6 +656,32 @@ users (without CAP_SYS_ADMIN). The default value is 2. ============================================================== +perf_event_max_stack: + +Controls maximum number of stack frames to copy for (attr.sample_type & +PERF_SAMPLE_CALLCHAIN) configured events, for instance, when using +'perf record -g' or 'perf trace --call-graph fp'. + +This can only be done when no events are in use that have callchains +enabled, otherwise writing to this file will return -EBUSY. + +The default value is 127. + +============================================================== + +perf_event_max_contexts_per_stack: + +Controls maximum number of stack frame context entries for +(attr.sample_type & PERF_SAMPLE_CALLCHAIN) configured events, for +instance, when using 'perf record -g' or 'perf trace --call-graph fp'. + +This can only be done when no events are in use that have callchains +enabled, otherwise writing to this file will return -EBUSY. + +The default value is 8. + +============================================================== + pid_max: PID allocation wrap value. When the kernel's next PID value diff --git a/Documentation/sysctl/net.txt b/Documentation/sysctl/net.txt index 809ab6efcc74..f0480f7ea740 100644 --- a/Documentation/sysctl/net.txt +++ b/Documentation/sysctl/net.txt @@ -43,6 +43,17 @@ Values : 1 - enable the JIT 2 - enable the JIT and ask the compiler to emit traces on kernel log. +bpf_jit_harden +-------------- + +This enables hardening for the Berkeley Packet Filter Just in Time compiler. +Supported are eBPF JIT backends. Enabling hardening trades off performance, +but can mitigate JIT spraying. +Values : + 0 - disable JIT hardening (default value) + 1 - enable JIT hardening for unprivileged users only + 2 - enable JIT hardening for all users + dev_weight -------------- diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt index 34a5fece3121..720355cbdf45 100644 --- a/Documentation/sysctl/vm.txt +++ b/Documentation/sysctl/vm.txt @@ -57,6 +57,7 @@ Currently, these files are in /proc/sys/vm: - panic_on_oom - percpu_pagelist_fraction - stat_interval +- stat_refresh - swappiness - user_reserve_kbytes - vfs_cache_pressure @@ -755,6 +756,19 @@ is 1 second. ============================================================== +stat_refresh + +Any read or write (by root only) flushes all the per-cpu vm statistics +into their global totals, for more accurate reports when testing +e.g. cat /proc/sys/vm/stat_refresh /proc/meminfo + +As a side-effect, it also checks for negative totals (elsewhere reported +as 0) and "fails" with EINVAL if any are found, with a warning in dmesg. +(At time of writing, a few stats are known sometimes to be found negative, +with no ill effects: errors and warnings on these stats are suppressed.) + +============================================================== + swappiness This control is used to define how aggressive the kernel will swap diff --git a/Documentation/sysrq.txt b/Documentation/sysrq.txt index 13f5619b2203..3a3b30ac2a75 100644 --- a/Documentation/sysrq.txt +++ b/Documentation/sysrq.txt @@ -212,7 +212,7 @@ it is currently registered in that slot. This is in case the slot has been overwritten since you registered it. The Magic SysRQ system works by registering key operations against a key op -lookup table, which is defined in 'drivers/char/sysrq.c'. This key table has +lookup table, which is defined in 'drivers/tty/sysrq.c'. This key table has a number of operations registered into it at compile time, but is mutable, and 2 functions are exported for interface to it: register_sysrq_key and unregister_sysrq_key. diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt index ed419d6c8dec..efc3f3d293c4 100644 --- a/Documentation/thermal/sysfs-api.txt +++ b/Documentation/thermal/sysfs-api.txt @@ -69,8 +69,8 @@ temperature) and throttle appropriate devices. 1.1.2 void thermal_zone_device_unregister(struct thermal_zone_device *tz) This interface function removes the thermal zone device. - It deletes the corresponding entry form /sys/class/thermal folder and - unbind all the thermal cooling devices it uses. + It deletes the corresponding entry from /sys/class/thermal folder and + unbinds all the thermal cooling devices it uses. 1.1.3 struct thermal_zone_device *thermal_zone_of_sensor_register( struct device *dev, int sensor_id, void *data, @@ -146,32 +146,32 @@ temperature) and throttle appropriate devices. This interface function adds a new thermal cooling device (fan/processor/...) to /sys/class/thermal/ folder as cooling_device[0-*]. It tries to bind itself - to all the thermal zone devices register at the same time. + to all the thermal zone devices registered at the same time. name: the cooling device name. devdata: device private data. ops: thermal cooling devices call-backs. .get_max_state: get the Maximum throttle state of the cooling device. - .get_cur_state: get the Current throttle state of the cooling device. + .get_cur_state: get the Currently requested throttle state of the cooling device. .set_cur_state: set the Current throttle state of the cooling device. 1.2.2 void thermal_cooling_device_unregister(struct thermal_cooling_device *cdev) - This interface function remove the thermal cooling device. - It deletes the corresponding entry form /sys/class/thermal folder and - unbind itself from all the thermal zone devices using it. + This interface function removes the thermal cooling device. + It deletes the corresponding entry from /sys/class/thermal folder and + unbinds itself from all the thermal zone devices using it. 1.3 interface for binding a thermal zone device with a thermal cooling device 1.3.1 int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, int trip, struct thermal_cooling_device *cdev, unsigned long upper, unsigned long lower, unsigned int weight); - This interface function bind a thermal cooling device to the certain trip + This interface function binds a thermal cooling device to a particular trip point of a thermal zone device. This function is usually called in the thermal zone device .bind callback. tz: the thermal zone device cdev: thermal cooling device - trip: indicates which trip point the cooling devices is associated with - in this thermal zone. + trip: indicates which trip point in this thermal zone the cooling device + is associated with. upper:the Maximum cooling state for this trip point. THERMAL_NO_LIMIT means no upper limit, and the cooling device can be in max_state. @@ -184,13 +184,13 @@ temperature) and throttle appropriate devices. 1.3.2 int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz, int trip, struct thermal_cooling_device *cdev); - This interface function unbind a thermal cooling device from the certain + This interface function unbinds a thermal cooling device from a particular trip point of a thermal zone device. This function is usually called in the thermal zone device .unbind callback. tz: the thermal zone device cdev: thermal cooling device - trip: indicates which trip point the cooling devices is associated with - in this thermal zone. + trip: indicates which trip point in this thermal zone the cooling device + is associated with. 1.4 Thermal Zone Parameters 1.4.1 struct thermal_bind_params @@ -210,13 +210,13 @@ temperature) and throttle appropriate devices. this thermal zone and cdev, for a particular trip point. If nth bit is set, then the cdev and thermal zone are bound for trip point n. - .limits: This is an array of cooling state limits. Must have exactly - 2 * thermal_zone.number_of_trip_points. It is an array consisting - of tuples <lower-state upper-state> of state limits. Each trip - will be associated with one state limit tuple when binding. - A NULL pointer means <THERMAL_NO_LIMITS THERMAL_NO_LIMITS> - on all trips. These limits are used when binding a cdev to a - trip point. + .binding_limits: This is an array of cooling state limits. Must have + exactly 2 * thermal_zone.number_of_trip_points. It is an + array consisting of tuples <lower-state upper-state> of + state limits. Each trip will be associated with one state + limit tuple when binding. A NULL pointer means + <THERMAL_NO_LIMITS THERMAL_NO_LIMITS> on all trips. + These limits are used when binding a cdev to a trip point. .match: This call back returns success(0) if the 'tz and cdev' need to be bound, as per platform data. 1.4.2 struct thermal_zone_params @@ -351,8 +351,8 @@ cdev[0-*] RO, Optional cdev[0-*]_trip_point - The trip point with which cdev[0-*] is associated in this thermal - zone; -1 means the cooling device is not associated with any trip + The trip point in this thermal zone which cdev[0-*] is associated + with; -1 means the cooling device is not associated with any trip point. RO, Optional diff --git a/Documentation/timers/hrtimers.txt b/Documentation/timers/hrtimers.txt index ce31f65e12e7..588d85724f10 100644 --- a/Documentation/timers/hrtimers.txt +++ b/Documentation/timers/hrtimers.txt @@ -28,9 +28,9 @@ several reasons why such integration is hard/impossible: - the unpredictable [O(N)] overhead of cascading leads to delays which necessitate a more complex handling of high resolution timers, which - in turn decreases robustness. Such a design still led to rather large + in turn decreases robustness. Such a design still leads to rather large timing inaccuracies. Cascading is a fundamental property of the timer - wheel concept, it cannot be 'designed out' without unevitably + wheel concept, it cannot be 'designed out' without inevitably degrading other portions of the timers.c code in an unacceptable way. - the implementation of the current posix-timer subsystem on top of @@ -119,7 +119,7 @@ was not really a win, due to the different data structures. Also, the hrtimer functions now have clearer behavior and clearer names - such as hrtimer_try_to_cancel() and hrtimer_cancel() [which are roughly equivalent to del_timer() and del_timer_sync()] - so there's no direct -1:1 mapping between them on the algorithmical level, and thus no real +1:1 mapping between them on the algorithmic level, and thus no real potential for code sharing either. Basic data types: every time value, absolute or relative, is in a diff --git a/Documentation/trace/coresight.txt b/Documentation/trace/coresight.txt index 0a5c3290e732..a33c88cd5d1d 100644 --- a/Documentation/trace/coresight.txt +++ b/Documentation/trace/coresight.txt @@ -190,8 +190,8 @@ expected to be accessed and controlled using those entries. Last but not least, "struct module *owner" is expected to be set to reflect the information carried in "THIS_MODULE". -How to use ----------- +How to use the tracer modules +----------------------------- Before trace collection can start, a coresight sink needs to be identify. There is no limit on the amount of sinks (nor sources) that can be enabled at @@ -297,3 +297,36 @@ Info Tracing enabled Instruction 13570831 0x8026B584 E28DD00C false ADD sp,sp,#0xc Instruction 0 0x8026B588 E8BD8000 true LDM sp!,{pc} Timestamp Timestamp: 17107041535 + +How to use the STM module +------------------------- + +Using the System Trace Macrocell module is the same as the tracers - the only +difference is that clients are driving the trace capture rather +than the program flow through the code. + +As with any other CoreSight component, specifics about the STM tracer can be +found in sysfs with more information on each entry being found in [1]: + +root@genericarmv8:~# ls /sys/bus/coresight/devices/20100000.stm +enable_source hwevent_select port_enable subsystem uevent +hwevent_enable mgmt port_select traceid +root@genericarmv8:~# + +Like any other source a sink needs to be identified and the STM enabled before +being used: + +root@genericarmv8:~# echo 1 > /sys/bus/coresight/devices/20010000.etf/enable_sink +root@genericarmv8:~# echo 1 > /sys/bus/coresight/devices/20100000.stm/enable_source + +From there user space applications can request and use channels using the devfs +interface provided for that purpose by the generic STM API: + +root@genericarmv8:~# ls -l /dev/20100000.stm +crw------- 1 root root 10, 61 Jan 3 18:11 /dev/20100000.stm +root@genericarmv8:~# + +Details on how to use the generic STM API can be found here [2]. + +[1]. Documentation/ABI/testing/sysfs-bus-coresight-devices-stm +[2]. Documentation/trace/stm.txt diff --git a/Documentation/trace/events.txt b/Documentation/trace/events.txt index c010be8c85d7..08d74d75150d 100644 --- a/Documentation/trace/events.txt +++ b/Documentation/trace/events.txt @@ -512,3 +512,1558 @@ The following commands are supported: Note that there can be only one traceon or traceoff trigger per triggering event. + +- hist + + This command aggregates event hits into a hash table keyed on one or + more trace event format fields (or stacktrace) and a set of running + totals derived from one or more trace event format fields and/or + event counts (hitcount). + + The format of a hist trigger is as follows: + + hist:keys=<field1[,field2,...]>[:values=<field1[,field2,...]>] + [:sort=<field1[,field2,...]>][:size=#entries][:pause][:continue] + [:clear][:name=histname1] [if <filter>] + + When a matching event is hit, an entry is added to a hash table + using the key(s) and value(s) named. Keys and values correspond to + fields in the event's format description. Values must correspond to + numeric fields - on an event hit, the value(s) will be added to a + sum kept for that field. The special string 'hitcount' can be used + in place of an explicit value field - this is simply a count of + event hits. If 'values' isn't specified, an implicit 'hitcount' + value will be automatically created and used as the only value. + Keys can be any field, or the special string 'stacktrace', which + will use the event's kernel stacktrace as the key. The keywords + 'keys' or 'key' can be used to specify keys, and the keywords + 'values', 'vals', or 'val' can be used to specify values. Compound + keys consisting of up to two fields can be specified by the 'keys' + keyword. Hashing a compound key produces a unique entry in the + table for each unique combination of component keys, and can be + useful for providing more fine-grained summaries of event data. + Additionally, sort keys consisting of up to two fields can be + specified by the 'sort' keyword. If more than one field is + specified, the result will be a 'sort within a sort': the first key + is taken to be the primary sort key and the second the secondary + key. If a hist trigger is given a name using the 'name' parameter, + its histogram data will be shared with other triggers of the same + name, and trigger hits will update this common data. Only triggers + with 'compatible' fields can be combined in this way; triggers are + 'compatible' if the fields named in the trigger share the same + number and type of fields and those fields also have the same names. + Note that any two events always share the compatible 'hitcount' and + 'stacktrace' fields and can therefore be combined using those + fields, however pointless that may be. + + 'hist' triggers add a 'hist' file to each event's subdirectory. + Reading the 'hist' file for the event will dump the hash table in + its entirety to stdout. If there are multiple hist triggers + attached to an event, there will be a table for each trigger in the + output. The table displayed for a named trigger will be the same as + any other instance having the same name. Each printed hash table + entry is a simple list of the keys and values comprising the entry; + keys are printed first and are delineated by curly braces, and are + followed by the set of value fields for the entry. By default, + numeric fields are displayed as base-10 integers. This can be + modified by appending any of the following modifiers to the field + name: + + .hex display a number as a hex value + .sym display an address as a symbol + .sym-offset display an address as a symbol and offset + .syscall display a syscall id as a system call name + .execname display a common_pid as a program name + + Note that in general the semantics of a given field aren't + interpreted when applying a modifier to it, but there are some + restrictions to be aware of in this regard: + + - only the 'hex' modifier can be used for values (because values + are essentially sums, and the other modifiers don't make sense + in that context). + - the 'execname' modifier can only be used on a 'common_pid'. The + reason for this is that the execname is simply the 'comm' value + saved for the 'current' process when an event was triggered, + which is the same as the common_pid value saved by the event + tracing code. Trying to apply that comm value to other pid + values wouldn't be correct, and typically events that care save + pid-specific comm fields in the event itself. + + A typical usage scenario would be the following to enable a hist + trigger, read its current contents, and then turn it off: + + # echo 'hist:keys=skbaddr.hex:vals=len' > \ + /sys/kernel/debug/tracing/events/net/netif_rx/trigger + + # cat /sys/kernel/debug/tracing/events/net/netif_rx/hist + + # echo '!hist:keys=skbaddr.hex:vals=len' > \ + /sys/kernel/debug/tracing/events/net/netif_rx/trigger + + The trigger file itself can be read to show the details of the + currently attached hist trigger. This information is also displayed + at the top of the 'hist' file when read. + + By default, the size of the hash table is 2048 entries. The 'size' + parameter can be used to specify more or fewer than that. The units + are in terms of hashtable entries - if a run uses more entries than + specified, the results will show the number of 'drops', the number + of hits that were ignored. The size should be a power of 2 between + 128 and 131072 (any non- power-of-2 number specified will be rounded + up). + + The 'sort' parameter can be used to specify a value field to sort + on. The default if unspecified is 'hitcount' and the default sort + order is 'ascending'. To sort in the opposite direction, append + .descending' to the sort key. + + The 'pause' parameter can be used to pause an existing hist trigger + or to start a hist trigger but not log any events until told to do + so. 'continue' or 'cont' can be used to start or restart a paused + hist trigger. + + The 'clear' parameter will clear the contents of a running hist + trigger and leave its current paused/active state. + + Note that the 'pause', 'cont', and 'clear' parameters should be + applied using 'append' shell operator ('>>') if applied to an + existing trigger, rather than via the '>' operator, which will cause + the trigger to be removed through truncation. + +- enable_hist/disable_hist + + The enable_hist and disable_hist triggers can be used to have one + event conditionally start and stop another event's already-attached + hist trigger. Any number of enable_hist and disable_hist triggers + can be attached to a given event, allowing that event to kick off + and stop aggregations on a host of other events. + + The format is very similar to the enable/disable_event triggers: + + enable_hist:<system>:<event>[:count] + disable_hist:<system>:<event>[:count] + + Instead of enabling or disabling the tracing of the target event + into the trace buffer as the enable/disable_event triggers do, the + enable/disable_hist triggers enable or disable the aggregation of + the target event into a hash table. + + A typical usage scenario for the enable_hist/disable_hist triggers + would be to first set up a paused hist trigger on some event, + followed by an enable_hist/disable_hist pair that turns the hist + aggregation on and off when conditions of interest are hit: + + # echo 'hist:keys=skbaddr.hex:vals=len:pause' > \ + /sys/kernel/debug/tracing/events/net/netif_receive_skb/trigger + + # echo 'enable_hist:net:netif_receive_skb if filename==/usr/bin/wget' > \ + /sys/kernel/debug/tracing/events/sched/sched_process_exec/trigger + + # echo 'disable_hist:net:netif_receive_skb if comm==wget' > \ + /sys/kernel/debug/tracing/events/sched/sched_process_exit/trigger + + The above sets up an initially paused hist trigger which is unpaused + and starts aggregating events when a given program is executed, and + which stops aggregating when the process exits and the hist trigger + is paused again. + + The examples below provide a more concrete illustration of the + concepts and typical usage patterns discussed above. + + +6.2 'hist' trigger examples +--------------------------- + + The first set of examples creates aggregations using the kmalloc + event. The fields that can be used for the hist trigger are listed + in the kmalloc event's format file: + + # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/format + name: kmalloc + ID: 374 + format: + field:unsigned short common_type; offset:0; size:2; signed:0; + field:unsigned char common_flags; offset:2; size:1; signed:0; + field:unsigned char common_preempt_count; offset:3; size:1; signed:0; + field:int common_pid; offset:4; size:4; signed:1; + + field:unsigned long call_site; offset:8; size:8; signed:0; + field:const void * ptr; offset:16; size:8; signed:0; + field:size_t bytes_req; offset:24; size:8; signed:0; + field:size_t bytes_alloc; offset:32; size:8; signed:0; + field:gfp_t gfp_flags; offset:40; size:4; signed:0; + + We'll start by creating a hist trigger that generates a simple table + that lists the total number of bytes requested for each function in + the kernel that made one or more calls to kmalloc: + + # echo 'hist:key=call_site:val=bytes_req' > \ + /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger + + This tells the tracing system to create a 'hist' trigger using the + call_site field of the kmalloc event as the key for the table, which + just means that each unique call_site address will have an entry + created for it in the table. The 'val=bytes_req' parameter tells + the hist trigger that for each unique entry (call_site) in the + table, it should keep a running total of the number of bytes + requested by that call_site. + + We'll let it run for awhile and then dump the contents of the 'hist' + file in the kmalloc event's subdirectory (for readability, a number + of entries have been omitted): + + # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/hist + # trigger info: hist:keys=call_site:vals=bytes_req:sort=hitcount:size=2048 [active] + + { call_site: 18446744072106379007 } hitcount: 1 bytes_req: 176 + { call_site: 18446744071579557049 } hitcount: 1 bytes_req: 1024 + { call_site: 18446744071580608289 } hitcount: 1 bytes_req: 16384 + { call_site: 18446744071581827654 } hitcount: 1 bytes_req: 24 + { call_site: 18446744071580700980 } hitcount: 1 bytes_req: 8 + { call_site: 18446744071579359876 } hitcount: 1 bytes_req: 152 + { call_site: 18446744071580795365 } hitcount: 3 bytes_req: 144 + { call_site: 18446744071581303129 } hitcount: 3 bytes_req: 144 + { call_site: 18446744071580713234 } hitcount: 4 bytes_req: 2560 + { call_site: 18446744071580933750 } hitcount: 4 bytes_req: 736 + . + . + . + { call_site: 18446744072106047046 } hitcount: 69 bytes_req: 5576 + { call_site: 18446744071582116407 } hitcount: 73 bytes_req: 2336 + { call_site: 18446744072106054684 } hitcount: 136 bytes_req: 140504 + { call_site: 18446744072106224230 } hitcount: 136 bytes_req: 19584 + { call_site: 18446744072106078074 } hitcount: 153 bytes_req: 2448 + { call_site: 18446744072106062406 } hitcount: 153 bytes_req: 36720 + { call_site: 18446744071582507929 } hitcount: 153 bytes_req: 37088 + { call_site: 18446744072102520590 } hitcount: 273 bytes_req: 10920 + { call_site: 18446744071582143559 } hitcount: 358 bytes_req: 716 + { call_site: 18446744072106465852 } hitcount: 417 bytes_req: 56712 + { call_site: 18446744072102523378 } hitcount: 485 bytes_req: 27160 + { call_site: 18446744072099568646 } hitcount: 1676 bytes_req: 33520 + + Totals: + Hits: 4610 + Entries: 45 + Dropped: 0 + + The output displays a line for each entry, beginning with the key + specified in the trigger, followed by the value(s) also specified in + the trigger. At the beginning of the output is a line that displays + the trigger info, which can also be displayed by reading the + 'trigger' file: + + # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger + hist:keys=call_site:vals=bytes_req:sort=hitcount:size=2048 [active] + + At the end of the output are a few lines that display the overall + totals for the run. The 'Hits' field shows the total number of + times the event trigger was hit, the 'Entries' field shows the total + number of used entries in the hash table, and the 'Dropped' field + shows the number of hits that were dropped because the number of + used entries for the run exceeded the maximum number of entries + allowed for the table (normally 0, but if not a hint that you may + want to increase the size of the table using the 'size' parameter). + + Notice in the above output that there's an extra field, 'hitcount', + which wasn't specified in the trigger. Also notice that in the + trigger info output, there's a parameter, 'sort=hitcount', which + wasn't specified in the trigger either. The reason for that is that + every trigger implicitly keeps a count of the total number of hits + attributed to a given entry, called the 'hitcount'. That hitcount + information is explicitly displayed in the output, and in the + absence of a user-specified sort parameter, is used as the default + sort field. + + The value 'hitcount' can be used in place of an explicit value in + the 'values' parameter if you don't really need to have any + particular field summed and are mainly interested in hit + frequencies. + + To turn the hist trigger off, simply call up the trigger in the + command history and re-execute it with a '!' prepended: + + # echo '!hist:key=call_site:val=bytes_req' > \ + /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger + + Finally, notice that the call_site as displayed in the output above + isn't really very useful. It's an address, but normally addresses + are displayed in hex. To have a numeric field displayed as a hex + value, simply append '.hex' to the field name in the trigger: + + # echo 'hist:key=call_site.hex:val=bytes_req' > \ + /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger + + # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/hist + # trigger info: hist:keys=call_site.hex:vals=bytes_req:sort=hitcount:size=2048 [active] + + { call_site: ffffffffa026b291 } hitcount: 1 bytes_req: 433 + { call_site: ffffffffa07186ff } hitcount: 1 bytes_req: 176 + { call_site: ffffffff811ae721 } hitcount: 1 bytes_req: 16384 + { call_site: ffffffff811c5134 } hitcount: 1 bytes_req: 8 + { call_site: ffffffffa04a9ebb } hitcount: 1 bytes_req: 511 + { call_site: ffffffff8122e0a6 } hitcount: 1 bytes_req: 12 + { call_site: ffffffff8107da84 } hitcount: 1 bytes_req: 152 + { call_site: ffffffff812d8246 } hitcount: 1 bytes_req: 24 + { call_site: ffffffff811dc1e5 } hitcount: 3 bytes_req: 144 + { call_site: ffffffffa02515e8 } hitcount: 3 bytes_req: 648 + { call_site: ffffffff81258159 } hitcount: 3 bytes_req: 144 + { call_site: ffffffff811c80f4 } hitcount: 4 bytes_req: 544 + . + . + . + { call_site: ffffffffa06c7646 } hitcount: 106 bytes_req: 8024 + { call_site: ffffffffa06cb246 } hitcount: 132 bytes_req: 31680 + { call_site: ffffffffa06cef7a } hitcount: 132 bytes_req: 2112 + { call_site: ffffffff8137e399 } hitcount: 132 bytes_req: 23232 + { call_site: ffffffffa06c941c } hitcount: 185 bytes_req: 171360 + { call_site: ffffffffa06f2a66 } hitcount: 185 bytes_req: 26640 + { call_site: ffffffffa036a70e } hitcount: 265 bytes_req: 10600 + { call_site: ffffffff81325447 } hitcount: 292 bytes_req: 584 + { call_site: ffffffffa072da3c } hitcount: 446 bytes_req: 60656 + { call_site: ffffffffa036b1f2 } hitcount: 526 bytes_req: 29456 + { call_site: ffffffffa0099c06 } hitcount: 1780 bytes_req: 35600 + + Totals: + Hits: 4775 + Entries: 46 + Dropped: 0 + + Even that's only marginally more useful - while hex values do look + more like addresses, what users are typically more interested in + when looking at text addresses are the corresponding symbols + instead. To have an address displayed as symbolic value instead, + simply append '.sym' or '.sym-offset' to the field name in the + trigger: + + # echo 'hist:key=call_site.sym:val=bytes_req' > \ + /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger + + # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/hist + # trigger info: hist:keys=call_site.sym:vals=bytes_req:sort=hitcount:size=2048 [active] + + { call_site: [ffffffff810adcb9] syslog_print_all } hitcount: 1 bytes_req: 1024 + { call_site: [ffffffff8154bc62] usb_control_msg } hitcount: 1 bytes_req: 8 + { call_site: [ffffffffa00bf6fe] hidraw_send_report [hid] } hitcount: 1 bytes_req: 7 + { call_site: [ffffffff8154acbe] usb_alloc_urb } hitcount: 1 bytes_req: 192 + { call_site: [ffffffffa00bf1ca] hidraw_report_event [hid] } hitcount: 1 bytes_req: 7 + { call_site: [ffffffff811e3a25] __seq_open_private } hitcount: 1 bytes_req: 40 + { call_site: [ffffffff8109524a] alloc_fair_sched_group } hitcount: 2 bytes_req: 128 + { call_site: [ffffffff811febd5] fsnotify_alloc_group } hitcount: 2 bytes_req: 528 + { call_site: [ffffffff81440f58] __tty_buffer_request_room } hitcount: 2 bytes_req: 2624 + { call_site: [ffffffff81200ba6] inotify_new_group } hitcount: 2 bytes_req: 96 + { call_site: [ffffffffa05e19af] ieee80211_start_tx_ba_session [mac80211] } hitcount: 2 bytes_req: 464 + { call_site: [ffffffff81672406] tcp_get_metrics } hitcount: 2 bytes_req: 304 + { call_site: [ffffffff81097ec2] alloc_rt_sched_group } hitcount: 2 bytes_req: 128 + { call_site: [ffffffff81089b05] sched_create_group } hitcount: 2 bytes_req: 1424 + . + . + . + { call_site: [ffffffffa04a580c] intel_crtc_page_flip [i915] } hitcount: 1185 bytes_req: 123240 + { call_site: [ffffffffa0287592] drm_mode_page_flip_ioctl [drm] } hitcount: 1185 bytes_req: 104280 + { call_site: [ffffffffa04c4a3c] intel_plane_duplicate_state [i915] } hitcount: 1402 bytes_req: 190672 + { call_site: [ffffffff812891ca] ext4_find_extent } hitcount: 1518 bytes_req: 146208 + { call_site: [ffffffffa029070e] drm_vma_node_allow [drm] } hitcount: 1746 bytes_req: 69840 + { call_site: [ffffffffa045e7c4] i915_gem_do_execbuffer.isra.23 [i915] } hitcount: 2021 bytes_req: 792312 + { call_site: [ffffffffa02911f2] drm_modeset_lock_crtc [drm] } hitcount: 2592 bytes_req: 145152 + { call_site: [ffffffffa0489a66] intel_ring_begin [i915] } hitcount: 2629 bytes_req: 378576 + { call_site: [ffffffffa046041c] i915_gem_execbuffer2 [i915] } hitcount: 2629 bytes_req: 3783248 + { call_site: [ffffffff81325607] apparmor_file_alloc_security } hitcount: 5192 bytes_req: 10384 + { call_site: [ffffffffa00b7c06] hid_report_raw_event [hid] } hitcount: 5529 bytes_req: 110584 + { call_site: [ffffffff8131ebf7] aa_alloc_task_context } hitcount: 21943 bytes_req: 702176 + { call_site: [ffffffff8125847d] ext4_htree_store_dirent } hitcount: 55759 bytes_req: 5074265 + + Totals: + Hits: 109928 + Entries: 71 + Dropped: 0 + + Because the default sort key above is 'hitcount', the above shows a + the list of call_sites by increasing hitcount, so that at the bottom + we see the functions that made the most kmalloc calls during the + run. If instead we we wanted to see the top kmalloc callers in + terms of the number of bytes requested rather than the number of + calls, and we wanted the top caller to appear at the top, we can use + the 'sort' parameter, along with the 'descending' modifier: + + # echo 'hist:key=call_site.sym:val=bytes_req:sort=bytes_req.descending' > \ + /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger + + # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/hist + # trigger info: hist:keys=call_site.sym:vals=bytes_req:sort=bytes_req.descending:size=2048 [active] + + { call_site: [ffffffffa046041c] i915_gem_execbuffer2 [i915] } hitcount: 2186 bytes_req: 3397464 + { call_site: [ffffffffa045e7c4] i915_gem_do_execbuffer.isra.23 [i915] } hitcount: 1790 bytes_req: 712176 + { call_site: [ffffffff8125847d] ext4_htree_store_dirent } hitcount: 8132 bytes_req: 513135 + { call_site: [ffffffff811e2a1b] seq_buf_alloc } hitcount: 106 bytes_req: 440128 + { call_site: [ffffffffa0489a66] intel_ring_begin [i915] } hitcount: 2186 bytes_req: 314784 + { call_site: [ffffffff812891ca] ext4_find_extent } hitcount: 2174 bytes_req: 208992 + { call_site: [ffffffff811ae8e1] __kmalloc } hitcount: 8 bytes_req: 131072 + { call_site: [ffffffffa04c4a3c] intel_plane_duplicate_state [i915] } hitcount: 859 bytes_req: 116824 + { call_site: [ffffffffa02911f2] drm_modeset_lock_crtc [drm] } hitcount: 1834 bytes_req: 102704 + { call_site: [ffffffffa04a580c] intel_crtc_page_flip [i915] } hitcount: 972 bytes_req: 101088 + { call_site: [ffffffffa0287592] drm_mode_page_flip_ioctl [drm] } hitcount: 972 bytes_req: 85536 + { call_site: [ffffffffa00b7c06] hid_report_raw_event [hid] } hitcount: 3333 bytes_req: 66664 + { call_site: [ffffffff8137e559] sg_kmalloc } hitcount: 209 bytes_req: 61632 + . + . + . + { call_site: [ffffffff81095225] alloc_fair_sched_group } hitcount: 2 bytes_req: 128 + { call_site: [ffffffff81097ec2] alloc_rt_sched_group } hitcount: 2 bytes_req: 128 + { call_site: [ffffffff812d8406] copy_semundo } hitcount: 2 bytes_req: 48 + { call_site: [ffffffff81200ba6] inotify_new_group } hitcount: 1 bytes_req: 48 + { call_site: [ffffffffa027121a] drm_getmagic [drm] } hitcount: 1 bytes_req: 48 + { call_site: [ffffffff811e3a25] __seq_open_private } hitcount: 1 bytes_req: 40 + { call_site: [ffffffff811c52f4] bprm_change_interp } hitcount: 2 bytes_req: 16 + { call_site: [ffffffff8154bc62] usb_control_msg } hitcount: 1 bytes_req: 8 + { call_site: [ffffffffa00bf1ca] hidraw_report_event [hid] } hitcount: 1 bytes_req: 7 + { call_site: [ffffffffa00bf6fe] hidraw_send_report [hid] } hitcount: 1 bytes_req: 7 + + Totals: + Hits: 32133 + Entries: 81 + Dropped: 0 + + To display the offset and size information in addition to the symbol + name, just use 'sym-offset' instead: + + # echo 'hist:key=call_site.sym-offset:val=bytes_req:sort=bytes_req.descending' > \ + /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger + + # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/hist + # trigger info: hist:keys=call_site.sym-offset:vals=bytes_req:sort=bytes_req.descending:size=2048 [active] + + { call_site: [ffffffffa046041c] i915_gem_execbuffer2+0x6c/0x2c0 [i915] } hitcount: 4569 bytes_req: 3163720 + { call_site: [ffffffffa0489a66] intel_ring_begin+0xc6/0x1f0 [i915] } hitcount: 4569 bytes_req: 657936 + { call_site: [ffffffffa045e7c4] i915_gem_do_execbuffer.isra.23+0x694/0x1020 [i915] } hitcount: 1519 bytes_req: 472936 + { call_site: [ffffffffa045e646] i915_gem_do_execbuffer.isra.23+0x516/0x1020 [i915] } hitcount: 3050 bytes_req: 211832 + { call_site: [ffffffff811e2a1b] seq_buf_alloc+0x1b/0x50 } hitcount: 34 bytes_req: 148384 + { call_site: [ffffffffa04a580c] intel_crtc_page_flip+0xbc/0x870 [i915] } hitcount: 1385 bytes_req: 144040 + { call_site: [ffffffff811ae8e1] __kmalloc+0x191/0x1b0 } hitcount: 8 bytes_req: 131072 + { call_site: [ffffffffa0287592] drm_mode_page_flip_ioctl+0x282/0x360 [drm] } hitcount: 1385 bytes_req: 121880 + { call_site: [ffffffffa02911f2] drm_modeset_lock_crtc+0x32/0x100 [drm] } hitcount: 1848 bytes_req: 103488 + { call_site: [ffffffffa04c4a3c] intel_plane_duplicate_state+0x2c/0xa0 [i915] } hitcount: 461 bytes_req: 62696 + { call_site: [ffffffffa029070e] drm_vma_node_allow+0x2e/0xd0 [drm] } hitcount: 1541 bytes_req: 61640 + { call_site: [ffffffff815f8d7b] sk_prot_alloc+0xcb/0x1b0 } hitcount: 57 bytes_req: 57456 + . + . + . + { call_site: [ffffffff8109524a] alloc_fair_sched_group+0x5a/0x1a0 } hitcount: 2 bytes_req: 128 + { call_site: [ffffffffa027b921] drm_vm_open_locked+0x31/0xa0 [drm] } hitcount: 3 bytes_req: 96 + { call_site: [ffffffff8122e266] proc_self_follow_link+0x76/0xb0 } hitcount: 8 bytes_req: 96 + { call_site: [ffffffff81213e80] load_elf_binary+0x240/0x1650 } hitcount: 3 bytes_req: 84 + { call_site: [ffffffff8154bc62] usb_control_msg+0x42/0x110 } hitcount: 1 bytes_req: 8 + { call_site: [ffffffffa00bf6fe] hidraw_send_report+0x7e/0x1a0 [hid] } hitcount: 1 bytes_req: 7 + { call_site: [ffffffffa00bf1ca] hidraw_report_event+0x8a/0x120 [hid] } hitcount: 1 bytes_req: 7 + + Totals: + Hits: 26098 + Entries: 64 + Dropped: 0 + + We can also add multiple fields to the 'values' parameter. For + example, we might want to see the total number of bytes allocated + alongside bytes requested, and display the result sorted by bytes + allocated in a descending order: + + # echo 'hist:keys=call_site.sym:values=bytes_req,bytes_alloc:sort=bytes_alloc.descending' > \ + /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger + + # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/hist + # trigger info: hist:keys=call_site.sym:vals=bytes_req,bytes_alloc:sort=bytes_alloc.descending:size=2048 [active] + + { call_site: [ffffffffa046041c] i915_gem_execbuffer2 [i915] } hitcount: 7403 bytes_req: 4084360 bytes_alloc: 5958016 + { call_site: [ffffffff811e2a1b] seq_buf_alloc } hitcount: 541 bytes_req: 2213968 bytes_alloc: 2228224 + { call_site: [ffffffffa0489a66] intel_ring_begin [i915] } hitcount: 7404 bytes_req: 1066176 bytes_alloc: 1421568 + { call_site: [ffffffffa045e7c4] i915_gem_do_execbuffer.isra.23 [i915] } hitcount: 1565 bytes_req: 557368 bytes_alloc: 1037760 + { call_site: [ffffffff8125847d] ext4_htree_store_dirent } hitcount: 9557 bytes_req: 595778 bytes_alloc: 695744 + { call_site: [ffffffffa045e646] i915_gem_do_execbuffer.isra.23 [i915] } hitcount: 5839 bytes_req: 430680 bytes_alloc: 470400 + { call_site: [ffffffffa04c4a3c] intel_plane_duplicate_state [i915] } hitcount: 2388 bytes_req: 324768 bytes_alloc: 458496 + { call_site: [ffffffffa02911f2] drm_modeset_lock_crtc [drm] } hitcount: 3911 bytes_req: 219016 bytes_alloc: 250304 + { call_site: [ffffffff815f8d7b] sk_prot_alloc } hitcount: 235 bytes_req: 236880 bytes_alloc: 240640 + { call_site: [ffffffff8137e559] sg_kmalloc } hitcount: 557 bytes_req: 169024 bytes_alloc: 221760 + { call_site: [ffffffffa00b7c06] hid_report_raw_event [hid] } hitcount: 9378 bytes_req: 187548 bytes_alloc: 206312 + { call_site: [ffffffffa04a580c] intel_crtc_page_flip [i915] } hitcount: 1519 bytes_req: 157976 bytes_alloc: 194432 + . + . + . + { call_site: [ffffffff8109bd3b] sched_autogroup_create_attach } hitcount: 2 bytes_req: 144 bytes_alloc: 192 + { call_site: [ffffffff81097ee8] alloc_rt_sched_group } hitcount: 2 bytes_req: 128 bytes_alloc: 128 + { call_site: [ffffffff8109524a] alloc_fair_sched_group } hitcount: 2 bytes_req: 128 bytes_alloc: 128 + { call_site: [ffffffff81095225] alloc_fair_sched_group } hitcount: 2 bytes_req: 128 bytes_alloc: 128 + { call_site: [ffffffff81097ec2] alloc_rt_sched_group } hitcount: 2 bytes_req: 128 bytes_alloc: 128 + { call_site: [ffffffff81213e80] load_elf_binary } hitcount: 3 bytes_req: 84 bytes_alloc: 96 + { call_site: [ffffffff81079a2e] kthread_create_on_node } hitcount: 1 bytes_req: 56 bytes_alloc: 64 + { call_site: [ffffffffa00bf6fe] hidraw_send_report [hid] } hitcount: 1 bytes_req: 7 bytes_alloc: 8 + { call_site: [ffffffff8154bc62] usb_control_msg } hitcount: 1 bytes_req: 8 bytes_alloc: 8 + { call_site: [ffffffffa00bf1ca] hidraw_report_event [hid] } hitcount: 1 bytes_req: 7 bytes_alloc: 8 + + Totals: + Hits: 66598 + Entries: 65 + Dropped: 0 + + Finally, to finish off our kmalloc example, instead of simply having + the hist trigger display symbolic call_sites, we can have the hist + trigger additionally display the complete set of kernel stack traces + that led to each call_site. To do that, we simply use the special + value 'stacktrace' for the key parameter: + + # echo 'hist:keys=stacktrace:values=bytes_req,bytes_alloc:sort=bytes_alloc' > \ + /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger + + The above trigger will use the kernel stack trace in effect when an + event is triggered as the key for the hash table. This allows the + enumeration of every kernel callpath that led up to a particular + event, along with a running total of any of the event fields for + that event. Here we tally bytes requested and bytes allocated for + every callpath in the system that led up to a kmalloc (in this case + every callpath to a kmalloc for a kernel compile): + + # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/hist + # trigger info: hist:keys=stacktrace:vals=bytes_req,bytes_alloc:sort=bytes_alloc:size=2048 [active] + + { stacktrace: + __kmalloc_track_caller+0x10b/0x1a0 + kmemdup+0x20/0x50 + hidraw_report_event+0x8a/0x120 [hid] + hid_report_raw_event+0x3ea/0x440 [hid] + hid_input_report+0x112/0x190 [hid] + hid_irq_in+0xc2/0x260 [usbhid] + __usb_hcd_giveback_urb+0x72/0x120 + usb_giveback_urb_bh+0x9e/0xe0 + tasklet_hi_action+0xf8/0x100 + __do_softirq+0x114/0x2c0 + irq_exit+0xa5/0xb0 + do_IRQ+0x5a/0xf0 + ret_from_intr+0x0/0x30 + cpuidle_enter+0x17/0x20 + cpu_startup_entry+0x315/0x3e0 + rest_init+0x7c/0x80 + } hitcount: 3 bytes_req: 21 bytes_alloc: 24 + { stacktrace: + __kmalloc_track_caller+0x10b/0x1a0 + kmemdup+0x20/0x50 + hidraw_report_event+0x8a/0x120 [hid] + hid_report_raw_event+0x3ea/0x440 [hid] + hid_input_report+0x112/0x190 [hid] + hid_irq_in+0xc2/0x260 [usbhid] + __usb_hcd_giveback_urb+0x72/0x120 + usb_giveback_urb_bh+0x9e/0xe0 + tasklet_hi_action+0xf8/0x100 + __do_softirq+0x114/0x2c0 + irq_exit+0xa5/0xb0 + do_IRQ+0x5a/0xf0 + ret_from_intr+0x0/0x30 + } hitcount: 3 bytes_req: 21 bytes_alloc: 24 + { stacktrace: + kmem_cache_alloc_trace+0xeb/0x150 + aa_alloc_task_context+0x27/0x40 + apparmor_cred_prepare+0x1f/0x50 + security_prepare_creds+0x16/0x20 + prepare_creds+0xdf/0x1a0 + SyS_capset+0xb5/0x200 + system_call_fastpath+0x12/0x6a + } hitcount: 1 bytes_req: 32 bytes_alloc: 32 + . + . + . + { stacktrace: + __kmalloc+0x11b/0x1b0 + i915_gem_execbuffer2+0x6c/0x2c0 [i915] + drm_ioctl+0x349/0x670 [drm] + do_vfs_ioctl+0x2f0/0x4f0 + SyS_ioctl+0x81/0xa0 + system_call_fastpath+0x12/0x6a + } hitcount: 17726 bytes_req: 13944120 bytes_alloc: 19593808 + { stacktrace: + __kmalloc+0x11b/0x1b0 + load_elf_phdrs+0x76/0xa0 + load_elf_binary+0x102/0x1650 + search_binary_handler+0x97/0x1d0 + do_execveat_common.isra.34+0x551/0x6e0 + SyS_execve+0x3a/0x50 + return_from_execve+0x0/0x23 + } hitcount: 33348 bytes_req: 17152128 bytes_alloc: 20226048 + { stacktrace: + kmem_cache_alloc_trace+0xeb/0x150 + apparmor_file_alloc_security+0x27/0x40 + security_file_alloc+0x16/0x20 + get_empty_filp+0x93/0x1c0 + path_openat+0x31/0x5f0 + do_filp_open+0x3a/0x90 + do_sys_open+0x128/0x220 + SyS_open+0x1e/0x20 + system_call_fastpath+0x12/0x6a + } hitcount: 4766422 bytes_req: 9532844 bytes_alloc: 38131376 + { stacktrace: + __kmalloc+0x11b/0x1b0 + seq_buf_alloc+0x1b/0x50 + seq_read+0x2cc/0x370 + proc_reg_read+0x3d/0x80 + __vfs_read+0x28/0xe0 + vfs_read+0x86/0x140 + SyS_read+0x46/0xb0 + system_call_fastpath+0x12/0x6a + } hitcount: 19133 bytes_req: 78368768 bytes_alloc: 78368768 + + Totals: + Hits: 6085872 + Entries: 253 + Dropped: 0 + + If you key a hist trigger on common_pid, in order for example to + gather and display sorted totals for each process, you can use the + special .execname modifier to display the executable names for the + processes in the table rather than raw pids. The example below + keeps a per-process sum of total bytes read: + + # echo 'hist:key=common_pid.execname:val=count:sort=count.descending' > \ + /sys/kernel/debug/tracing/events/syscalls/sys_enter_read/trigger + + # cat /sys/kernel/debug/tracing/events/syscalls/sys_enter_read/hist + # trigger info: hist:keys=common_pid.execname:vals=count:sort=count.descending:size=2048 [active] + + { common_pid: gnome-terminal [ 3196] } hitcount: 280 count: 1093512 + { common_pid: Xorg [ 1309] } hitcount: 525 count: 256640 + { common_pid: compiz [ 2889] } hitcount: 59 count: 254400 + { common_pid: bash [ 8710] } hitcount: 3 count: 66369 + { common_pid: dbus-daemon-lau [ 8703] } hitcount: 49 count: 47739 + { common_pid: irqbalance [ 1252] } hitcount: 27 count: 27648 + { common_pid: 01ifupdown [ 8705] } hitcount: 3 count: 17216 + { common_pid: dbus-daemon [ 772] } hitcount: 10 count: 12396 + { common_pid: Socket Thread [ 8342] } hitcount: 11 count: 11264 + { common_pid: nm-dhcp-client. [ 8701] } hitcount: 6 count: 7424 + { common_pid: gmain [ 1315] } hitcount: 18 count: 6336 + . + . + . + { common_pid: postgres [ 1892] } hitcount: 2 count: 32 + { common_pid: postgres [ 1891] } hitcount: 2 count: 32 + { common_pid: gmain [ 8704] } hitcount: 2 count: 32 + { common_pid: upstart-dbus-br [ 2740] } hitcount: 21 count: 21 + { common_pid: nm-dispatcher.a [ 8696] } hitcount: 1 count: 16 + { common_pid: indicator-datet [ 2904] } hitcount: 1 count: 16 + { common_pid: gdbus [ 2998] } hitcount: 1 count: 16 + { common_pid: rtkit-daemon [ 2052] } hitcount: 1 count: 8 + { common_pid: init [ 1] } hitcount: 2 count: 2 + + Totals: + Hits: 2116 + Entries: 51 + Dropped: 0 + + Similarly, if you key a hist trigger on syscall id, for example to + gather and display a list of systemwide syscall hits, you can use + the special .syscall modifier to display the syscall names rather + than raw ids. The example below keeps a running total of syscall + counts for the system during the run: + + # echo 'hist:key=id.syscall:val=hitcount' > \ + /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/trigger + + # cat /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/hist + # trigger info: hist:keys=id.syscall:vals=hitcount:sort=hitcount:size=2048 [active] + + { id: sys_fsync [ 74] } hitcount: 1 + { id: sys_newuname [ 63] } hitcount: 1 + { id: sys_prctl [157] } hitcount: 1 + { id: sys_statfs [137] } hitcount: 1 + { id: sys_symlink [ 88] } hitcount: 1 + { id: sys_sendmmsg [307] } hitcount: 1 + { id: sys_semctl [ 66] } hitcount: 1 + { id: sys_readlink [ 89] } hitcount: 3 + { id: sys_bind [ 49] } hitcount: 3 + { id: sys_getsockname [ 51] } hitcount: 3 + { id: sys_unlink [ 87] } hitcount: 3 + { id: sys_rename [ 82] } hitcount: 4 + { id: unknown_syscall [ 58] } hitcount: 4 + { id: sys_connect [ 42] } hitcount: 4 + { id: sys_getpid [ 39] } hitcount: 4 + . + . + . + { id: sys_rt_sigprocmask [ 14] } hitcount: 952 + { id: sys_futex [202] } hitcount: 1534 + { id: sys_write [ 1] } hitcount: 2689 + { id: sys_setitimer [ 38] } hitcount: 2797 + { id: sys_read [ 0] } hitcount: 3202 + { id: sys_select [ 23] } hitcount: 3773 + { id: sys_writev [ 20] } hitcount: 4531 + { id: sys_poll [ 7] } hitcount: 8314 + { id: sys_recvmsg [ 47] } hitcount: 13738 + { id: sys_ioctl [ 16] } hitcount: 21843 + + Totals: + Hits: 67612 + Entries: 72 + Dropped: 0 + + The syscall counts above provide a rough overall picture of system + call activity on the system; we can see for example that the most + popular system call on this system was the 'sys_ioctl' system call. + + We can use 'compound' keys to refine that number and provide some + further insight as to which processes exactly contribute to the + overall ioctl count. + + The command below keeps a hitcount for every unique combination of + system call id and pid - the end result is essentially a table + that keeps a per-pid sum of system call hits. The results are + sorted using the system call id as the primary key, and the + hitcount sum as the secondary key: + + # echo 'hist:key=id.syscall,common_pid.execname:val=hitcount:sort=id,hitcount' > \ + /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/trigger + + # cat /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/hist + # trigger info: hist:keys=id.syscall,common_pid.execname:vals=hitcount:sort=id.syscall,hitcount:size=2048 [active] + + { id: sys_read [ 0], common_pid: rtkit-daemon [ 1877] } hitcount: 1 + { id: sys_read [ 0], common_pid: gdbus [ 2976] } hitcount: 1 + { id: sys_read [ 0], common_pid: console-kit-dae [ 3400] } hitcount: 1 + { id: sys_read [ 0], common_pid: postgres [ 1865] } hitcount: 1 + { id: sys_read [ 0], common_pid: deja-dup-monito [ 3543] } hitcount: 2 + { id: sys_read [ 0], common_pid: NetworkManager [ 890] } hitcount: 2 + { id: sys_read [ 0], common_pid: evolution-calen [ 3048] } hitcount: 2 + { id: sys_read [ 0], common_pid: postgres [ 1864] } hitcount: 2 + { id: sys_read [ 0], common_pid: nm-applet [ 3022] } hitcount: 2 + { id: sys_read [ 0], common_pid: whoopsie [ 1212] } hitcount: 2 + . + . + . + { id: sys_ioctl [ 16], common_pid: bash [ 8479] } hitcount: 1 + { id: sys_ioctl [ 16], common_pid: bash [ 3472] } hitcount: 12 + { id: sys_ioctl [ 16], common_pid: gnome-terminal [ 3199] } hitcount: 16 + { id: sys_ioctl [ 16], common_pid: Xorg [ 1267] } hitcount: 1808 + { id: sys_ioctl [ 16], common_pid: compiz [ 2994] } hitcount: 5580 + . + . + . + { id: sys_waitid [247], common_pid: upstart-dbus-br [ 2690] } hitcount: 3 + { id: sys_waitid [247], common_pid: upstart-dbus-br [ 2688] } hitcount: 16 + { id: sys_inotify_add_watch [254], common_pid: gmain [ 975] } hitcount: 2 + { id: sys_inotify_add_watch [254], common_pid: gmain [ 3204] } hitcount: 4 + { id: sys_inotify_add_watch [254], common_pid: gmain [ 2888] } hitcount: 4 + { id: sys_inotify_add_watch [254], common_pid: gmain [ 3003] } hitcount: 4 + { id: sys_inotify_add_watch [254], common_pid: gmain [ 2873] } hitcount: 4 + { id: sys_inotify_add_watch [254], common_pid: gmain [ 3196] } hitcount: 6 + { id: sys_openat [257], common_pid: java [ 2623] } hitcount: 2 + { id: sys_eventfd2 [290], common_pid: ibus-ui-gtk3 [ 2760] } hitcount: 4 + { id: sys_eventfd2 [290], common_pid: compiz [ 2994] } hitcount: 6 + + Totals: + Hits: 31536 + Entries: 323 + Dropped: 0 + + The above list does give us a breakdown of the ioctl syscall by + pid, but it also gives us quite a bit more than that, which we + don't really care about at the moment. Since we know the syscall + id for sys_ioctl (16, displayed next to the sys_ioctl name), we + can use that to filter out all the other syscalls: + + # echo 'hist:key=id.syscall,common_pid.execname:val=hitcount:sort=id,hitcount if id == 16' > \ + /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/trigger + + # cat /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/hist + # trigger info: hist:keys=id.syscall,common_pid.execname:vals=hitcount:sort=id.syscall,hitcount:size=2048 if id == 16 [active] + + { id: sys_ioctl [ 16], common_pid: gmain [ 2769] } hitcount: 1 + { id: sys_ioctl [ 16], common_pid: evolution-addre [ 8571] } hitcount: 1 + { id: sys_ioctl [ 16], common_pid: gmain [ 3003] } hitcount: 1 + { id: sys_ioctl [ 16], common_pid: gmain [ 2781] } hitcount: 1 + { id: sys_ioctl [ 16], common_pid: gmain [ 2829] } hitcount: 1 + { id: sys_ioctl [ 16], common_pid: bash [ 8726] } hitcount: 1 + { id: sys_ioctl [ 16], common_pid: bash [ 8508] } hitcount: 1 + { id: sys_ioctl [ 16], common_pid: gmain [ 2970] } hitcount: 1 + { id: sys_ioctl [ 16], common_pid: gmain [ 2768] } hitcount: 1 + . + . + . + { id: sys_ioctl [ 16], common_pid: pool [ 8559] } hitcount: 45 + { id: sys_ioctl [ 16], common_pid: pool [ 8555] } hitcount: 48 + { id: sys_ioctl [ 16], common_pid: pool [ 8551] } hitcount: 48 + { id: sys_ioctl [ 16], common_pid: avahi-daemon [ 896] } hitcount: 66 + { id: sys_ioctl [ 16], common_pid: Xorg [ 1267] } hitcount: 26674 + { id: sys_ioctl [ 16], common_pid: compiz [ 2994] } hitcount: 73443 + + Totals: + Hits: 101162 + Entries: 103 + Dropped: 0 + + The above output shows that 'compiz' and 'Xorg' are far and away + the heaviest ioctl callers (which might lead to questions about + whether they really need to be making all those calls and to + possible avenues for further investigation.) + + The compound key examples used a key and a sum value (hitcount) to + sort the output, but we can just as easily use two keys instead. + Here's an example where we use a compound key composed of the the + common_pid and size event fields. Sorting with pid as the primary + key and 'size' as the secondary key allows us to display an + ordered summary of the recvfrom sizes, with counts, received by + each process: + + # echo 'hist:key=common_pid.execname,size:val=hitcount:sort=common_pid,size' > \ + /sys/kernel/debug/tracing/events/syscalls/sys_enter_recvfrom/trigger + + # cat /sys/kernel/debug/tracing/events/syscalls/sys_enter_recvfrom/hist + # trigger info: hist:keys=common_pid.execname,size:vals=hitcount:sort=common_pid.execname,size:size=2048 [active] + + { common_pid: smbd [ 784], size: 4 } hitcount: 1 + { common_pid: dnsmasq [ 1412], size: 4096 } hitcount: 672 + { common_pid: postgres [ 1796], size: 1000 } hitcount: 6 + { common_pid: postgres [ 1867], size: 1000 } hitcount: 10 + { common_pid: bamfdaemon [ 2787], size: 28 } hitcount: 2 + { common_pid: bamfdaemon [ 2787], size: 14360 } hitcount: 1 + { common_pid: compiz [ 2994], size: 8 } hitcount: 1 + { common_pid: compiz [ 2994], size: 20 } hitcount: 11 + { common_pid: gnome-terminal [ 3199], size: 4 } hitcount: 2 + { common_pid: firefox [ 8817], size: 4 } hitcount: 1 + { common_pid: firefox [ 8817], size: 8 } hitcount: 5 + { common_pid: firefox [ 8817], size: 588 } hitcount: 2 + { common_pid: firefox [ 8817], size: 628 } hitcount: 1 + { common_pid: firefox [ 8817], size: 6944 } hitcount: 1 + { common_pid: firefox [ 8817], size: 408880 } hitcount: 2 + { common_pid: firefox [ 8822], size: 8 } hitcount: 2 + { common_pid: firefox [ 8822], size: 160 } hitcount: 2 + { common_pid: firefox [ 8822], size: 320 } hitcount: 2 + { common_pid: firefox [ 8822], size: 352 } hitcount: 1 + . + . + . + { common_pid: pool [ 8923], size: 1960 } hitcount: 10 + { common_pid: pool [ 8923], size: 2048 } hitcount: 10 + { common_pid: pool [ 8924], size: 1960 } hitcount: 10 + { common_pid: pool [ 8924], size: 2048 } hitcount: 10 + { common_pid: pool [ 8928], size: 1964 } hitcount: 4 + { common_pid: pool [ 8928], size: 1965 } hitcount: 2 + { common_pid: pool [ 8928], size: 2048 } hitcount: 6 + { common_pid: pool [ 8929], size: 1982 } hitcount: 1 + { common_pid: pool [ 8929], size: 2048 } hitcount: 1 + + Totals: + Hits: 2016 + Entries: 224 + Dropped: 0 + + The above example also illustrates the fact that although a compound + key is treated as a single entity for hashing purposes, the sub-keys + it's composed of can be accessed independently. + + The next example uses a string field as the hash key and + demonstrates how you can manually pause and continue a hist trigger. + In this example, we'll aggregate fork counts and don't expect a + large number of entries in the hash table, so we'll drop it to a + much smaller number, say 256: + + # echo 'hist:key=child_comm:val=hitcount:size=256' > \ + /sys/kernel/debug/tracing/events/sched/sched_process_fork/trigger + + # cat /sys/kernel/debug/tracing/events/sched/sched_process_fork/hist + # trigger info: hist:keys=child_comm:vals=hitcount:sort=hitcount:size=256 [active] + + { child_comm: dconf worker } hitcount: 1 + { child_comm: ibus-daemon } hitcount: 1 + { child_comm: whoopsie } hitcount: 1 + { child_comm: smbd } hitcount: 1 + { child_comm: gdbus } hitcount: 1 + { child_comm: kthreadd } hitcount: 1 + { child_comm: dconf worker } hitcount: 1 + { child_comm: evolution-alarm } hitcount: 2 + { child_comm: Socket Thread } hitcount: 2 + { child_comm: postgres } hitcount: 2 + { child_comm: bash } hitcount: 3 + { child_comm: compiz } hitcount: 3 + { child_comm: evolution-sourc } hitcount: 4 + { child_comm: dhclient } hitcount: 4 + { child_comm: pool } hitcount: 5 + { child_comm: nm-dispatcher.a } hitcount: 8 + { child_comm: firefox } hitcount: 8 + { child_comm: dbus-daemon } hitcount: 8 + { child_comm: glib-pacrunner } hitcount: 10 + { child_comm: evolution } hitcount: 23 + + Totals: + Hits: 89 + Entries: 20 + Dropped: 0 + + If we want to pause the hist trigger, we can simply append :pause to + the command that started the trigger. Notice that the trigger info + displays as [paused]: + + # echo 'hist:key=child_comm:val=hitcount:size=256:pause' >> \ + /sys/kernel/debug/tracing/events/sched/sched_process_fork/trigger + + # cat /sys/kernel/debug/tracing/events/sched/sched_process_fork/hist + # trigger info: hist:keys=child_comm:vals=hitcount:sort=hitcount:size=256 [paused] + + { child_comm: dconf worker } hitcount: 1 + { child_comm: kthreadd } hitcount: 1 + { child_comm: dconf worker } hitcount: 1 + { child_comm: gdbus } hitcount: 1 + { child_comm: ibus-daemon } hitcount: 1 + { child_comm: Socket Thread } hitcount: 2 + { child_comm: evolution-alarm } hitcount: 2 + { child_comm: smbd } hitcount: 2 + { child_comm: bash } hitcount: 3 + { child_comm: whoopsie } hitcount: 3 + { child_comm: compiz } hitcount: 3 + { child_comm: evolution-sourc } hitcount: 4 + { child_comm: pool } hitcount: 5 + { child_comm: postgres } hitcount: 6 + { child_comm: firefox } hitcount: 8 + { child_comm: dhclient } hitcount: 10 + { child_comm: emacs } hitcount: 12 + { child_comm: dbus-daemon } hitcount: 20 + { child_comm: nm-dispatcher.a } hitcount: 20 + { child_comm: evolution } hitcount: 35 + { child_comm: glib-pacrunner } hitcount: 59 + + Totals: + Hits: 199 + Entries: 21 + Dropped: 0 + + To manually continue having the trigger aggregate events, append + :cont instead. Notice that the trigger info displays as [active] + again, and the data has changed: + + # echo 'hist:key=child_comm:val=hitcount:size=256:cont' >> \ + /sys/kernel/debug/tracing/events/sched/sched_process_fork/trigger + + # cat /sys/kernel/debug/tracing/events/sched/sched_process_fork/hist + # trigger info: hist:keys=child_comm:vals=hitcount:sort=hitcount:size=256 [active] + + { child_comm: dconf worker } hitcount: 1 + { child_comm: dconf worker } hitcount: 1 + { child_comm: kthreadd } hitcount: 1 + { child_comm: gdbus } hitcount: 1 + { child_comm: ibus-daemon } hitcount: 1 + { child_comm: Socket Thread } hitcount: 2 + { child_comm: evolution-alarm } hitcount: 2 + { child_comm: smbd } hitcount: 2 + { child_comm: whoopsie } hitcount: 3 + { child_comm: compiz } hitcount: 3 + { child_comm: evolution-sourc } hitcount: 4 + { child_comm: bash } hitcount: 5 + { child_comm: pool } hitcount: 5 + { child_comm: postgres } hitcount: 6 + { child_comm: firefox } hitcount: 8 + { child_comm: dhclient } hitcount: 11 + { child_comm: emacs } hitcount: 12 + { child_comm: dbus-daemon } hitcount: 22 + { child_comm: nm-dispatcher.a } hitcount: 22 + { child_comm: evolution } hitcount: 35 + { child_comm: glib-pacrunner } hitcount: 59 + + Totals: + Hits: 206 + Entries: 21 + Dropped: 0 + + The previous example showed how to start and stop a hist trigger by + appending 'pause' and 'continue' to the hist trigger command. A + hist trigger can also be started in a paused state by initially + starting the trigger with ':pause' appended. This allows you to + start the trigger only when you're ready to start collecting data + and not before. For example, you could start the trigger in a + paused state, then unpause it and do something you want to measure, + then pause the trigger again when done. + + Of course, doing this manually can be difficult and error-prone, but + it is possible to automatically start and stop a hist trigger based + on some condition, via the enable_hist and disable_hist triggers. + + For example, suppose we wanted to take a look at the relative + weights in terms of skb length for each callpath that leads to a + netif_receieve_skb event when downloading a decent-sized file using + wget. + + First we set up an initially paused stacktrace trigger on the + netif_receive_skb event: + + # echo 'hist:key=stacktrace:vals=len:pause' > \ + /sys/kernel/debug/tracing/events/net/netif_receive_skb/trigger + + Next, we set up an 'enable_hist' trigger on the sched_process_exec + event, with an 'if filename==/usr/bin/wget' filter. The effect of + this new trigger is that it will 'unpause' the hist trigger we just + set up on netif_receive_skb if and only if it sees a + sched_process_exec event with a filename of '/usr/bin/wget'. When + that happens, all netif_receive_skb events are aggregated into a + hash table keyed on stacktrace: + + # echo 'enable_hist:net:netif_receive_skb if filename==/usr/bin/wget' > \ + /sys/kernel/debug/tracing/events/sched/sched_process_exec/trigger + + The aggregation continues until the netif_receive_skb is paused + again, which is what the following disable_hist event does by + creating a similar setup on the sched_process_exit event, using the + filter 'comm==wget': + + # echo 'disable_hist:net:netif_receive_skb if comm==wget' > \ + /sys/kernel/debug/tracing/events/sched/sched_process_exit/trigger + + Whenever a process exits and the comm field of the disable_hist + trigger filter matches 'comm==wget', the netif_receive_skb hist + trigger is disabled. + + The overall effect is that netif_receive_skb events are aggregated + into the hash table for only the duration of the wget. Executing a + wget command and then listing the 'hist' file will display the + output generated by the wget command: + + $ wget https://www.kernel.org/pub/linux/kernel/v3.x/patch-3.19.xz + + # cat /sys/kernel/debug/tracing/events/net/netif_receive_skb/hist + # trigger info: hist:keys=stacktrace:vals=len:sort=hitcount:size=2048 [paused] + + { stacktrace: + __netif_receive_skb_core+0x46d/0x990 + __netif_receive_skb+0x18/0x60 + netif_receive_skb_internal+0x23/0x90 + napi_gro_receive+0xc8/0x100 + ieee80211_deliver_skb+0xd6/0x270 [mac80211] + ieee80211_rx_handlers+0xccf/0x22f0 [mac80211] + ieee80211_prepare_and_rx_handle+0x4e7/0xc40 [mac80211] + ieee80211_rx+0x31d/0x900 [mac80211] + iwlagn_rx_reply_rx+0x3db/0x6f0 [iwldvm] + iwl_rx_dispatch+0x8e/0xf0 [iwldvm] + iwl_pcie_irq_handler+0xe3c/0x12f0 [iwlwifi] + irq_thread_fn+0x20/0x50 + irq_thread+0x11f/0x150 + kthread+0xd2/0xf0 + ret_from_fork+0x42/0x70 + } hitcount: 85 len: 28884 + { stacktrace: + __netif_receive_skb_core+0x46d/0x990 + __netif_receive_skb+0x18/0x60 + netif_receive_skb_internal+0x23/0x90 + napi_gro_complete+0xa4/0xe0 + dev_gro_receive+0x23a/0x360 + napi_gro_receive+0x30/0x100 + ieee80211_deliver_skb+0xd6/0x270 [mac80211] + ieee80211_rx_handlers+0xccf/0x22f0 [mac80211] + ieee80211_prepare_and_rx_handle+0x4e7/0xc40 [mac80211] + ieee80211_rx+0x31d/0x900 [mac80211] + iwlagn_rx_reply_rx+0x3db/0x6f0 [iwldvm] + iwl_rx_dispatch+0x8e/0xf0 [iwldvm] + iwl_pcie_irq_handler+0xe3c/0x12f0 [iwlwifi] + irq_thread_fn+0x20/0x50 + irq_thread+0x11f/0x150 + kthread+0xd2/0xf0 + } hitcount: 98 len: 664329 + { stacktrace: + __netif_receive_skb_core+0x46d/0x990 + __netif_receive_skb+0x18/0x60 + process_backlog+0xa8/0x150 + net_rx_action+0x15d/0x340 + __do_softirq+0x114/0x2c0 + do_softirq_own_stack+0x1c/0x30 + do_softirq+0x65/0x70 + __local_bh_enable_ip+0xb5/0xc0 + ip_finish_output+0x1f4/0x840 + ip_output+0x6b/0xc0 + ip_local_out_sk+0x31/0x40 + ip_send_skb+0x1a/0x50 + udp_send_skb+0x173/0x2a0 + udp_sendmsg+0x2bf/0x9f0 + inet_sendmsg+0x64/0xa0 + sock_sendmsg+0x3d/0x50 + } hitcount: 115 len: 13030 + { stacktrace: + __netif_receive_skb_core+0x46d/0x990 + __netif_receive_skb+0x18/0x60 + netif_receive_skb_internal+0x23/0x90 + napi_gro_complete+0xa4/0xe0 + napi_gro_flush+0x6d/0x90 + iwl_pcie_irq_handler+0x92a/0x12f0 [iwlwifi] + irq_thread_fn+0x20/0x50 + irq_thread+0x11f/0x150 + kthread+0xd2/0xf0 + ret_from_fork+0x42/0x70 + } hitcount: 934 len: 5512212 + + Totals: + Hits: 1232 + Entries: 4 + Dropped: 0 + + The above shows all the netif_receive_skb callpaths and their total + lengths for the duration of the wget command. + + The 'clear' hist trigger param can be used to clear the hash table. + Suppose we wanted to try another run of the previous example but + this time also wanted to see the complete list of events that went + into the histogram. In order to avoid having to set everything up + again, we can just clear the histogram first: + + # echo 'hist:key=stacktrace:vals=len:clear' >> \ + /sys/kernel/debug/tracing/events/net/netif_receive_skb/trigger + + Just to verify that it is in fact cleared, here's what we now see in + the hist file: + + # cat /sys/kernel/debug/tracing/events/net/netif_receive_skb/hist + # trigger info: hist:keys=stacktrace:vals=len:sort=hitcount:size=2048 [paused] + + Totals: + Hits: 0 + Entries: 0 + Dropped: 0 + + Since we want to see the detailed list of every netif_receive_skb + event occurring during the new run, which are in fact the same + events being aggregated into the hash table, we add some additional + 'enable_event' events to the triggering sched_process_exec and + sched_process_exit events as such: + + # echo 'enable_event:net:netif_receive_skb if filename==/usr/bin/wget' > \ + /sys/kernel/debug/tracing/events/sched/sched_process_exec/trigger + + # echo 'disable_event:net:netif_receive_skb if comm==wget' > \ + /sys/kernel/debug/tracing/events/sched/sched_process_exit/trigger + + If you read the trigger files for the sched_process_exec and + sched_process_exit triggers, you should see two triggers for each: + one enabling/disabling the hist aggregation and the other + enabling/disabling the logging of events: + + # cat /sys/kernel/debug/tracing/events/sched/sched_process_exec/trigger + enable_event:net:netif_receive_skb:unlimited if filename==/usr/bin/wget + enable_hist:net:netif_receive_skb:unlimited if filename==/usr/bin/wget + + # cat /sys/kernel/debug/tracing/events/sched/sched_process_exit/trigger + enable_event:net:netif_receive_skb:unlimited if comm==wget + disable_hist:net:netif_receive_skb:unlimited if comm==wget + + In other words, whenever either of the sched_process_exec or + sched_process_exit events is hit and matches 'wget', it enables or + disables both the histogram and the event log, and what you end up + with is a hash table and set of events just covering the specified + duration. Run the wget command again: + + $ wget https://www.kernel.org/pub/linux/kernel/v3.x/patch-3.19.xz + + Displaying the 'hist' file should show something similar to what you + saw in the last run, but this time you should also see the + individual events in the trace file: + + # cat /sys/kernel/debug/tracing/trace + + # tracer: nop + # + # entries-in-buffer/entries-written: 183/1426 #P:4 + # + # _-----=> irqs-off + # / _----=> need-resched + # | / _---=> hardirq/softirq + # || / _--=> preempt-depth + # ||| / delay + # TASK-PID CPU# |||| TIMESTAMP FUNCTION + # | | | |||| | | + wget-15108 [000] ..s1 31769.606929: netif_receive_skb: dev=lo skbaddr=ffff88009c353100 len=60 + wget-15108 [000] ..s1 31769.606999: netif_receive_skb: dev=lo skbaddr=ffff88009c353200 len=60 + dnsmasq-1382 [000] ..s1 31769.677652: netif_receive_skb: dev=lo skbaddr=ffff88009c352b00 len=130 + dnsmasq-1382 [000] ..s1 31769.685917: netif_receive_skb: dev=lo skbaddr=ffff88009c352200 len=138 + ##### CPU 2 buffer started #### + irq/29-iwlwifi-559 [002] ..s. 31772.031529: netif_receive_skb: dev=wlan0 skbaddr=ffff88009d433d00 len=2948 + irq/29-iwlwifi-559 [002] ..s. 31772.031572: netif_receive_skb: dev=wlan0 skbaddr=ffff88009d432200 len=1500 + irq/29-iwlwifi-559 [002] ..s. 31772.032196: netif_receive_skb: dev=wlan0 skbaddr=ffff88009d433100 len=2948 + irq/29-iwlwifi-559 [002] ..s. 31772.032761: netif_receive_skb: dev=wlan0 skbaddr=ffff88009d433000 len=2948 + irq/29-iwlwifi-559 [002] ..s. 31772.033220: netif_receive_skb: dev=wlan0 skbaddr=ffff88009d432e00 len=1500 + . + . + . + + The following example demonstrates how multiple hist triggers can be + attached to a given event. This capability can be useful for + creating a set of different summaries derived from the same set of + events, or for comparing the effects of different filters, among + other things. + + # echo 'hist:keys=skbaddr.hex:vals=len if len < 0' >> \ + /sys/kernel/debug/tracing/events/net/netif_receive_skb/trigger + # echo 'hist:keys=skbaddr.hex:vals=len if len > 4096' >> \ + /sys/kernel/debug/tracing/events/net/netif_receive_skb/trigger + # echo 'hist:keys=skbaddr.hex:vals=len if len == 256' >> \ + /sys/kernel/debug/tracing/events/net/netif_receive_skb/trigger + # echo 'hist:keys=skbaddr.hex:vals=len' >> \ + /sys/kernel/debug/tracing/events/net/netif_receive_skb/trigger + # echo 'hist:keys=len:vals=common_preempt_count' >> \ + /sys/kernel/debug/tracing/events/net/netif_receive_skb/trigger + + The above set of commands create four triggers differing only in + their filters, along with a completely different though fairly + nonsensical trigger. Note that in order to append multiple hist + triggers to the same file, you should use the '>>' operator to + append them ('>' will also add the new hist trigger, but will remove + any existing hist triggers beforehand). + + Displaying the contents of the 'hist' file for the event shows the + contents of all five histograms: + + # cat /sys/kernel/debug/tracing/events/net/netif_receive_skb/hist + + # event histogram + # + # trigger info: hist:keys=len:vals=hitcount,common_preempt_count:sort=hitcount:size=2048 [active] + # + + { len: 176 } hitcount: 1 common_preempt_count: 0 + { len: 223 } hitcount: 1 common_preempt_count: 0 + { len: 4854 } hitcount: 1 common_preempt_count: 0 + { len: 395 } hitcount: 1 common_preempt_count: 0 + { len: 177 } hitcount: 1 common_preempt_count: 0 + { len: 446 } hitcount: 1 common_preempt_count: 0 + { len: 1601 } hitcount: 1 common_preempt_count: 0 + . + . + . + { len: 1280 } hitcount: 66 common_preempt_count: 0 + { len: 116 } hitcount: 81 common_preempt_count: 40 + { len: 708 } hitcount: 112 common_preempt_count: 0 + { len: 46 } hitcount: 221 common_preempt_count: 0 + { len: 1264 } hitcount: 458 common_preempt_count: 0 + + Totals: + Hits: 1428 + Entries: 147 + Dropped: 0 + + + # event histogram + # + # trigger info: hist:keys=skbaddr.hex:vals=hitcount,len:sort=hitcount:size=2048 [active] + # + + { skbaddr: ffff8800baee5e00 } hitcount: 1 len: 130 + { skbaddr: ffff88005f3d5600 } hitcount: 1 len: 1280 + { skbaddr: ffff88005f3d4900 } hitcount: 1 len: 1280 + { skbaddr: ffff88009fed6300 } hitcount: 1 len: 115 + { skbaddr: ffff88009fe0ad00 } hitcount: 1 len: 115 + { skbaddr: ffff88008cdb1900 } hitcount: 1 len: 46 + { skbaddr: ffff880064b5ef00 } hitcount: 1 len: 118 + { skbaddr: ffff880044e3c700 } hitcount: 1 len: 60 + { skbaddr: ffff880100065900 } hitcount: 1 len: 46 + { skbaddr: ffff8800d46bd500 } hitcount: 1 len: 116 + { skbaddr: ffff88005f3d5f00 } hitcount: 1 len: 1280 + { skbaddr: ffff880100064700 } hitcount: 1 len: 365 + { skbaddr: ffff8800badb6f00 } hitcount: 1 len: 60 + . + . + . + { skbaddr: ffff88009fe0be00 } hitcount: 27 len: 24677 + { skbaddr: ffff88009fe0a400 } hitcount: 27 len: 23052 + { skbaddr: ffff88009fe0b700 } hitcount: 31 len: 25589 + { skbaddr: ffff88009fe0b600 } hitcount: 32 len: 27326 + { skbaddr: ffff88006a462800 } hitcount: 68 len: 71678 + { skbaddr: ffff88006a463700 } hitcount: 70 len: 72678 + { skbaddr: ffff88006a462b00 } hitcount: 71 len: 77589 + { skbaddr: ffff88006a463600 } hitcount: 73 len: 71307 + { skbaddr: ffff88006a462200 } hitcount: 81 len: 81032 + + Totals: + Hits: 1451 + Entries: 318 + Dropped: 0 + + + # event histogram + # + # trigger info: hist:keys=skbaddr.hex:vals=hitcount,len:sort=hitcount:size=2048 if len == 256 [active] + # + + + Totals: + Hits: 0 + Entries: 0 + Dropped: 0 + + + # event histogram + # + # trigger info: hist:keys=skbaddr.hex:vals=hitcount,len:sort=hitcount:size=2048 if len > 4096 [active] + # + + { skbaddr: ffff88009fd2c300 } hitcount: 1 len: 7212 + { skbaddr: ffff8800d2bcce00 } hitcount: 1 len: 7212 + { skbaddr: ffff8800d2bcd700 } hitcount: 1 len: 7212 + { skbaddr: ffff8800d2bcda00 } hitcount: 1 len: 21492 + { skbaddr: ffff8800ae2e2d00 } hitcount: 1 len: 7212 + { skbaddr: ffff8800d2bcdb00 } hitcount: 1 len: 7212 + { skbaddr: ffff88006a4df500 } hitcount: 1 len: 4854 + { skbaddr: ffff88008ce47b00 } hitcount: 1 len: 18636 + { skbaddr: ffff8800ae2e2200 } hitcount: 1 len: 12924 + { skbaddr: ffff88005f3e1000 } hitcount: 1 len: 4356 + { skbaddr: ffff8800d2bcdc00 } hitcount: 2 len: 24420 + { skbaddr: ffff8800d2bcc200 } hitcount: 2 len: 12996 + + Totals: + Hits: 14 + Entries: 12 + Dropped: 0 + + + # event histogram + # + # trigger info: hist:keys=skbaddr.hex:vals=hitcount,len:sort=hitcount:size=2048 if len < 0 [active] + # + + + Totals: + Hits: 0 + Entries: 0 + Dropped: 0 + + Named triggers can be used to have triggers share a common set of + histogram data. This capability is mostly useful for combining the + output of events generated by tracepoints contained inside inline + functions, but names can be used in a hist trigger on any event. + For example, these two triggers when hit will update the same 'len' + field in the shared 'foo' histogram data: + + # echo 'hist:name=foo:keys=skbaddr.hex:vals=len' > \ + /sys/kernel/debug/tracing/events/net/netif_receive_skb/trigger + # echo 'hist:name=foo:keys=skbaddr.hex:vals=len' > \ + /sys/kernel/debug/tracing/events/net/netif_rx/trigger + + You can see that they're updating common histogram data by reading + each event's hist files at the same time: + + # cat /sys/kernel/debug/tracing/events/net/netif_receive_skb/hist; + cat /sys/kernel/debug/tracing/events/net/netif_rx/hist + + # event histogram + # + # trigger info: hist:name=foo:keys=skbaddr.hex:vals=hitcount,len:sort=hitcount:size=2048 [active] + # + + { skbaddr: ffff88000ad53500 } hitcount: 1 len: 46 + { skbaddr: ffff8800af5a1500 } hitcount: 1 len: 76 + { skbaddr: ffff8800d62a1900 } hitcount: 1 len: 46 + { skbaddr: ffff8800d2bccb00 } hitcount: 1 len: 468 + { skbaddr: ffff8800d3c69900 } hitcount: 1 len: 46 + { skbaddr: ffff88009ff09100 } hitcount: 1 len: 52 + { skbaddr: ffff88010f13ab00 } hitcount: 1 len: 168 + { skbaddr: ffff88006a54f400 } hitcount: 1 len: 46 + { skbaddr: ffff8800d2bcc500 } hitcount: 1 len: 260 + { skbaddr: ffff880064505000 } hitcount: 1 len: 46 + { skbaddr: ffff8800baf24e00 } hitcount: 1 len: 32 + { skbaddr: ffff88009fe0ad00 } hitcount: 1 len: 46 + { skbaddr: ffff8800d3edff00 } hitcount: 1 len: 44 + { skbaddr: ffff88009fe0b400 } hitcount: 1 len: 168 + { skbaddr: ffff8800a1c55a00 } hitcount: 1 len: 40 + { skbaddr: ffff8800d2bcd100 } hitcount: 1 len: 40 + { skbaddr: ffff880064505f00 } hitcount: 1 len: 174 + { skbaddr: ffff8800a8bff200 } hitcount: 1 len: 160 + { skbaddr: ffff880044e3cc00 } hitcount: 1 len: 76 + { skbaddr: ffff8800a8bfe700 } hitcount: 1 len: 46 + { skbaddr: ffff8800d2bcdc00 } hitcount: 1 len: 32 + { skbaddr: ffff8800a1f64800 } hitcount: 1 len: 46 + { skbaddr: ffff8800d2bcde00 } hitcount: 1 len: 988 + { skbaddr: ffff88006a5dea00 } hitcount: 1 len: 46 + { skbaddr: ffff88002e37a200 } hitcount: 1 len: 44 + { skbaddr: ffff8800a1f32c00 } hitcount: 2 len: 676 + { skbaddr: ffff88000ad52600 } hitcount: 2 len: 107 + { skbaddr: ffff8800a1f91e00 } hitcount: 2 len: 92 + { skbaddr: ffff8800af5a0200 } hitcount: 2 len: 142 + { skbaddr: ffff8800d2bcc600 } hitcount: 2 len: 220 + { skbaddr: ffff8800ba36f500 } hitcount: 2 len: 92 + { skbaddr: ffff8800d021f800 } hitcount: 2 len: 92 + { skbaddr: ffff8800a1f33600 } hitcount: 2 len: 675 + { skbaddr: ffff8800a8bfff00 } hitcount: 3 len: 138 + { skbaddr: ffff8800d62a1300 } hitcount: 3 len: 138 + { skbaddr: ffff88002e37a100 } hitcount: 4 len: 184 + { skbaddr: ffff880064504400 } hitcount: 4 len: 184 + { skbaddr: ffff8800a8bfec00 } hitcount: 4 len: 184 + { skbaddr: ffff88000ad53700 } hitcount: 5 len: 230 + { skbaddr: ffff8800d2bcdb00 } hitcount: 5 len: 196 + { skbaddr: ffff8800a1f90000 } hitcount: 6 len: 276 + { skbaddr: ffff88006a54f900 } hitcount: 6 len: 276 + + Totals: + Hits: 81 + Entries: 42 + Dropped: 0 + # event histogram + # + # trigger info: hist:name=foo:keys=skbaddr.hex:vals=hitcount,len:sort=hitcount:size=2048 [active] + # + + { skbaddr: ffff88000ad53500 } hitcount: 1 len: 46 + { skbaddr: ffff8800af5a1500 } hitcount: 1 len: 76 + { skbaddr: ffff8800d62a1900 } hitcount: 1 len: 46 + { skbaddr: ffff8800d2bccb00 } hitcount: 1 len: 468 + { skbaddr: ffff8800d3c69900 } hitcount: 1 len: 46 + { skbaddr: ffff88009ff09100 } hitcount: 1 len: 52 + { skbaddr: ffff88010f13ab00 } hitcount: 1 len: 168 + { skbaddr: ffff88006a54f400 } hitcount: 1 len: 46 + { skbaddr: ffff8800d2bcc500 } hitcount: 1 len: 260 + { skbaddr: ffff880064505000 } hitcount: 1 len: 46 + { skbaddr: ffff8800baf24e00 } hitcount: 1 len: 32 + { skbaddr: ffff88009fe0ad00 } hitcount: 1 len: 46 + { skbaddr: ffff8800d3edff00 } hitcount: 1 len: 44 + { skbaddr: ffff88009fe0b400 } hitcount: 1 len: 168 + { skbaddr: ffff8800a1c55a00 } hitcount: 1 len: 40 + { skbaddr: ffff8800d2bcd100 } hitcount: 1 len: 40 + { skbaddr: ffff880064505f00 } hitcount: 1 len: 174 + { skbaddr: ffff8800a8bff200 } hitcount: 1 len: 160 + { skbaddr: ffff880044e3cc00 } hitcount: 1 len: 76 + { skbaddr: ffff8800a8bfe700 } hitcount: 1 len: 46 + { skbaddr: ffff8800d2bcdc00 } hitcount: 1 len: 32 + { skbaddr: ffff8800a1f64800 } hitcount: 1 len: 46 + { skbaddr: ffff8800d2bcde00 } hitcount: 1 len: 988 + { skbaddr: ffff88006a5dea00 } hitcount: 1 len: 46 + { skbaddr: ffff88002e37a200 } hitcount: 1 len: 44 + { skbaddr: ffff8800a1f32c00 } hitcount: 2 len: 676 + { skbaddr: ffff88000ad52600 } hitcount: 2 len: 107 + { skbaddr: ffff8800a1f91e00 } hitcount: 2 len: 92 + { skbaddr: ffff8800af5a0200 } hitcount: 2 len: 142 + { skbaddr: ffff8800d2bcc600 } hitcount: 2 len: 220 + { skbaddr: ffff8800ba36f500 } hitcount: 2 len: 92 + { skbaddr: ffff8800d021f800 } hitcount: 2 len: 92 + { skbaddr: ffff8800a1f33600 } hitcount: 2 len: 675 + { skbaddr: ffff8800a8bfff00 } hitcount: 3 len: 138 + { skbaddr: ffff8800d62a1300 } hitcount: 3 len: 138 + { skbaddr: ffff88002e37a100 } hitcount: 4 len: 184 + { skbaddr: ffff880064504400 } hitcount: 4 len: 184 + { skbaddr: ffff8800a8bfec00 } hitcount: 4 len: 184 + { skbaddr: ffff88000ad53700 } hitcount: 5 len: 230 + { skbaddr: ffff8800d2bcdb00 } hitcount: 5 len: 196 + { skbaddr: ffff8800a1f90000 } hitcount: 6 len: 276 + { skbaddr: ffff88006a54f900 } hitcount: 6 len: 276 + + Totals: + Hits: 81 + Entries: 42 + Dropped: 0 + + And here's an example that shows how to combine histogram data from + any two events even if they don't share any 'compatible' fields + other than 'hitcount' and 'stacktrace'. These commands create a + couple of triggers named 'bar' using those fields: + + # echo 'hist:name=bar:key=stacktrace:val=hitcount' > \ + /sys/kernel/debug/tracing/events/sched/sched_process_fork/trigger + # echo 'hist:name=bar:key=stacktrace:val=hitcount' > \ + /sys/kernel/debug/tracing/events/net/netif_rx/trigger + + And displaying the output of either shows some interesting if + somewhat confusing output: + + # cat /sys/kernel/debug/tracing/events/sched/sched_process_fork/hist + # cat /sys/kernel/debug/tracing/events/net/netif_rx/hist + + # event histogram + # + # trigger info: hist:name=bar:keys=stacktrace:vals=hitcount:sort=hitcount:size=2048 [active] + # + + { stacktrace: + _do_fork+0x18e/0x330 + kernel_thread+0x29/0x30 + kthreadd+0x154/0x1b0 + ret_from_fork+0x3f/0x70 + } hitcount: 1 + { stacktrace: + netif_rx_internal+0xb2/0xd0 + netif_rx_ni+0x20/0x70 + dev_loopback_xmit+0xaa/0xd0 + ip_mc_output+0x126/0x240 + ip_local_out_sk+0x31/0x40 + igmp_send_report+0x1e9/0x230 + igmp_timer_expire+0xe9/0x120 + call_timer_fn+0x39/0xf0 + run_timer_softirq+0x1e1/0x290 + __do_softirq+0xfd/0x290 + irq_exit+0x98/0xb0 + smp_apic_timer_interrupt+0x4a/0x60 + apic_timer_interrupt+0x6d/0x80 + cpuidle_enter+0x17/0x20 + call_cpuidle+0x3b/0x60 + cpu_startup_entry+0x22d/0x310 + } hitcount: 1 + { stacktrace: + netif_rx_internal+0xb2/0xd0 + netif_rx_ni+0x20/0x70 + dev_loopback_xmit+0xaa/0xd0 + ip_mc_output+0x17f/0x240 + ip_local_out_sk+0x31/0x40 + ip_send_skb+0x1a/0x50 + udp_send_skb+0x13e/0x270 + udp_sendmsg+0x2bf/0x980 + inet_sendmsg+0x67/0xa0 + sock_sendmsg+0x38/0x50 + SYSC_sendto+0xef/0x170 + SyS_sendto+0xe/0x10 + entry_SYSCALL_64_fastpath+0x12/0x6a + } hitcount: 2 + { stacktrace: + netif_rx_internal+0xb2/0xd0 + netif_rx+0x1c/0x60 + loopback_xmit+0x6c/0xb0 + dev_hard_start_xmit+0x219/0x3a0 + __dev_queue_xmit+0x415/0x4f0 + dev_queue_xmit_sk+0x13/0x20 + ip_finish_output2+0x237/0x340 + ip_finish_output+0x113/0x1d0 + ip_output+0x66/0xc0 + ip_local_out_sk+0x31/0x40 + ip_send_skb+0x1a/0x50 + udp_send_skb+0x16d/0x270 + udp_sendmsg+0x2bf/0x980 + inet_sendmsg+0x67/0xa0 + sock_sendmsg+0x38/0x50 + ___sys_sendmsg+0x14e/0x270 + } hitcount: 76 + { stacktrace: + netif_rx_internal+0xb2/0xd0 + netif_rx+0x1c/0x60 + loopback_xmit+0x6c/0xb0 + dev_hard_start_xmit+0x219/0x3a0 + __dev_queue_xmit+0x415/0x4f0 + dev_queue_xmit_sk+0x13/0x20 + ip_finish_output2+0x237/0x340 + ip_finish_output+0x113/0x1d0 + ip_output+0x66/0xc0 + ip_local_out_sk+0x31/0x40 + ip_send_skb+0x1a/0x50 + udp_send_skb+0x16d/0x270 + udp_sendmsg+0x2bf/0x980 + inet_sendmsg+0x67/0xa0 + sock_sendmsg+0x38/0x50 + ___sys_sendmsg+0x269/0x270 + } hitcount: 77 + { stacktrace: + netif_rx_internal+0xb2/0xd0 + netif_rx+0x1c/0x60 + loopback_xmit+0x6c/0xb0 + dev_hard_start_xmit+0x219/0x3a0 + __dev_queue_xmit+0x415/0x4f0 + dev_queue_xmit_sk+0x13/0x20 + ip_finish_output2+0x237/0x340 + ip_finish_output+0x113/0x1d0 + ip_output+0x66/0xc0 + ip_local_out_sk+0x31/0x40 + ip_send_skb+0x1a/0x50 + udp_send_skb+0x16d/0x270 + udp_sendmsg+0x2bf/0x980 + inet_sendmsg+0x67/0xa0 + sock_sendmsg+0x38/0x50 + SYSC_sendto+0xef/0x170 + } hitcount: 88 + { stacktrace: + _do_fork+0x18e/0x330 + SyS_clone+0x19/0x20 + entry_SYSCALL_64_fastpath+0x12/0x6a + } hitcount: 244 + + Totals: + Hits: 489 + Entries: 7 + Dropped: 0 diff --git a/Documentation/trace/ftrace.txt b/Documentation/trace/ftrace.txt index f52f297cb406..a6b3705e62a6 100644 --- a/Documentation/trace/ftrace.txt +++ b/Documentation/trace/ftrace.txt @@ -210,6 +210,11 @@ of ftrace. Here is a list of some of the key files: Note, sched_switch and sched_wake_up will also trace events listed in this file. + To have the PIDs of children of tasks with their PID in this file + added on fork, enable the "event-fork" option. That option will also + cause the PIDs of tasks to be removed from this file when the task + exits. + set_graph_function: Set a "trigger" function where tracing should start @@ -725,16 +730,14 @@ noraw nohex nobin noblock -nostacktrace trace_printk -noftrace_preempt nobranch annotate nouserstacktrace nosym-userobj noprintk-msg-only context-info -latency-format +nolatency-format sleep-time graph-time record-cmd @@ -742,7 +745,10 @@ overwrite nodisable_on_free irq-info markers +noevent-fork function-trace +nodisplay-graph +nostacktrace To disable one of the options, echo in the option prepended with "no". @@ -796,11 +802,6 @@ Here are the available options: block - When set, reading trace_pipe will not block when polled. - stacktrace - This is one of the options that changes the trace - itself. When a trace is recorded, so is the stack - of functions. This allows for back traces of - trace sites. - trace_printk - Can disable trace_printk() from writing into the buffer. branch - Enable branch tracing with the tracer. @@ -897,6 +898,10 @@ x494] <- /root/a.out[+0x4a8] <- /lib/libc-2.7.so[+0x1e1a6] When disabled, the trace_marker will error with EINVAL on write. + event-fork - When set, tasks with PIDs listed in set_event_pid will have + the PIDs of their children added to set_event_pid when those + tasks fork. Also, when tasks with PIDs in set_event_pid exit, + their PIDs will be removed from the file. function-trace - The latency tracers will enable function tracing if this option is enabled (default it is). When @@ -904,8 +909,17 @@ x494] <- /root/a.out[+0x4a8] <- /lib/libc-2.7.so[+0x1e1a6] functions. This keeps the overhead of the tracer down when performing latency tests. - Note: Some tracers have their own options. They only appear - when the tracer is active. + display-graph - When set, the latency tracers (irqsoff, wakeup, etc) will + use function graph tracing instead of function tracing. + + stacktrace - This is one of the options that changes the trace + itself. When a trace is recorded, so is the stack + of functions. This allows for back traces of + trace sites. + + Note: Some tracers have their own options. They only appear in this + file when the tracer is active. They always appear in the + options directory. @@ -1562,12 +1576,12 @@ Doing the same with chrt -r 5 and function-trace set. <idle>-0 3dN.1 12us : menu_hrtimer_cancel <-tick_nohz_idle_exit <idle>-0 3dN.1 12us : ktime_get <-tick_nohz_idle_exit <idle>-0 3dN.1 12us : tick_do_update_jiffies64 <-tick_nohz_idle_exit - <idle>-0 3dN.1 13us : update_cpu_load_nohz <-tick_nohz_idle_exit - <idle>-0 3dN.1 13us : _raw_spin_lock <-update_cpu_load_nohz + <idle>-0 3dN.1 13us : cpu_load_update_nohz <-tick_nohz_idle_exit + <idle>-0 3dN.1 13us : _raw_spin_lock <-cpu_load_update_nohz <idle>-0 3dN.1 13us : add_preempt_count <-_raw_spin_lock - <idle>-0 3dN.2 13us : __update_cpu_load <-update_cpu_load_nohz - <idle>-0 3dN.2 14us : sched_avg_update <-__update_cpu_load - <idle>-0 3dN.2 14us : _raw_spin_unlock <-update_cpu_load_nohz + <idle>-0 3dN.2 13us : __cpu_load_update <-cpu_load_update_nohz + <idle>-0 3dN.2 14us : sched_avg_update <-__cpu_load_update + <idle>-0 3dN.2 14us : _raw_spin_unlock <-cpu_load_update_nohz <idle>-0 3dN.2 14us : sub_preempt_count <-_raw_spin_unlock <idle>-0 3dN.1 15us : calc_load_exit_idle <-tick_nohz_idle_exit <idle>-0 3dN.1 15us : touch_softlockup_watchdog <-tick_nohz_idle_exit diff --git a/Documentation/usb/chipidea.txt b/Documentation/usb/chipidea.txt index 678741b0f213..edf7cdfddc88 100644 --- a/Documentation/usb/chipidea.txt +++ b/Documentation/usb/chipidea.txt @@ -3,14 +3,17 @@ To show how to demo OTG HNP and SRP functions via sys input files with 2 Freescale i.MX6Q sabre SD boards. -1.1 How to enable OTG FSM in menuconfig +1.1 How to enable OTG FSM --------------------------------------- -Select CONFIG_USB_OTG_FSM, rebuild kernel Image and modules. -If you want to check some internal variables for otg fsm, -mount debugfs, there are 2 files which can show otg fsm -variables and some controller registers value: +1.1.1 Select CONFIG_USB_OTG_FSM in menuconfig, rebuild kernel +Image and modules. If you want to check some internal +variables for otg fsm, mount debugfs, there are 2 files +which can show otg fsm variables and some controller registers value: cat /sys/kernel/debug/ci_hdrc.0/otg cat /sys/kernel/debug/ci_hdrc.0/registers +1.1.2 Add below entries in your dts file for your controller node + otg-rev = <0x0200>; + adp-disable; 1.2 Test operations ------------------- diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885 index 44a4cfbfdc40..85a8fdcfcdaa 100644 --- a/Documentation/video4linux/CARDLIST.cx23885 +++ b/Documentation/video4linux/CARDLIST.cx23885 @@ -52,3 +52,5 @@ 51 -> DVBSky T982 [4254:0982] 52 -> Hauppauge WinTV-HVR5525 [0070:f038] 53 -> Hauppauge WinTV Starburst [0070:c12a] + 54 -> ViewCast 260e [1576:0260] + 55 -> ViewCast 460e [1576:0460] diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx index 67209998a439..6784220c6a16 100644 --- a/Documentation/video4linux/CARDLIST.em28xx +++ b/Documentation/video4linux/CARDLIST.em28xx @@ -76,9 +76,9 @@ 75 -> Dikom DK300 (em2882) 76 -> KWorld PlusTV 340U or UB435-Q (ATSC) (em2870) [1b80:a340] 77 -> EM2874 Leadership ISDBT (em2874) - 78 -> PCTV nanoStick T2 290e (em28174) + 78 -> PCTV nanoStick T2 290e (em28174) [2013:024f] 79 -> Terratec Cinergy H5 (em2884) [eb1a:2885,0ccd:10a2,0ccd:10ad,0ccd:10b6] - 80 -> PCTV DVB-S2 Stick (460e) (em28174) + 80 -> PCTV DVB-S2 Stick (460e) (em28174) [2013:024c] 81 -> Hauppauge WinTV HVR 930C (em2884) [2040:1605] 82 -> Terratec Cinergy HTC Stick (em2884) [0ccd:00b2] 83 -> Honestech Vidbox NW03 (em2860) [eb1a:5006] @@ -90,9 +90,11 @@ 89 -> Delock 61959 (em2874) [1b80:e1cc] 90 -> KWorld USB ATSC TV Stick UB435-Q V2 (em2874) [1b80:e346] 91 -> SpeedLink Vicious And Devine Laplace webcam (em2765) [1ae7:9003,1ae7:9004] - 92 -> PCTV DVB-S2 Stick (461e) (em28178) + 92 -> PCTV DVB-S2 Stick (461e) (em28178) [2013:0258] 93 -> KWorld USB ATSC TV Stick UB435-Q V3 (em2874) [1b80:e34c] - 94 -> PCTV tripleStick (292e) (em28178) + 94 -> PCTV tripleStick (292e) (em28178) [2013:025f,2040:0264] 95 -> Leadtek VC100 (em2861) [0413:6f07] - 96 -> Terratec Cinergy T2 Stick HD (em28178) + 96 -> Terratec Cinergy T2 Stick HD (em28178) [eb1a:8179] 97 -> Elgato EyeTV Hybrid 2008 INT (em2884) [0fd9:0018] + 98 -> PLEX PX-BCUD (em28178) [3275:0085] + 99 -> Hauppauge WinTV-dualHD DVB (em28174) [2040:0265] diff --git a/Documentation/video4linux/Makefile b/Documentation/video4linux/Makefile deleted file mode 100644 index 65a351d75c95..000000000000 --- a/Documentation/video4linux/Makefile +++ /dev/null @@ -1 +0,0 @@ -obj-$(CONFIG_VIDEO_PCI_SKELETON) := v4l2-pci-skeleton.o diff --git a/Documentation/video4linux/README.cx88 b/Documentation/video4linux/README.cx88 index 35fae23f883b..b09ce36b921e 100644 --- a/Documentation/video4linux/README.cx88 +++ b/Documentation/video4linux/README.cx88 @@ -50,7 +50,7 @@ the driver. What to do then? cx88-cards.c. If that worked, mail me your changes as unified diff ("diff -u"). (3) Or you can mail me the config information. I need at least the - following informations to add the card: + following information to add the card: * the PCI Subsystem ID ("0070:3400" from the line above, "lspci -v" output is fine too). diff --git a/Documentation/video4linux/bttv/Sound-FAQ b/Documentation/video4linux/bttv/Sound-FAQ index d3f1d7783d1c..646a47de0016 100644 --- a/Documentation/video4linux/bttv/Sound-FAQ +++ b/Documentation/video4linux/bttv/Sound-FAQ @@ -55,7 +55,7 @@ receiver chips. Some boards use the i2c bus instead of the gpio pins to connect the mux chip. As mentioned above, there is a array which holds the required -informations for each known board. You basically have to create a new +information for each known board. You basically have to create a new line for your board. The important fields are these two: struct tvcard diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt index fa41608ab2b4..cbefc7902f5f 100644 --- a/Documentation/video4linux/v4l2-framework.txt +++ b/Documentation/video4linux/v4l2-framework.txt @@ -35,7 +35,7 @@ need and this same framework should make it much easier to refactor common code into utility functions shared by all drivers. A good example to look at as a reference is the v4l2-pci-skeleton.c -source that is available in this directory. It is a skeleton driver for +source that is available in samples/v4l/. It is a skeleton driver for a PCI capture card, and demonstrates how to use the V4L2 driver framework. It can be used as a template for real PCI video capture driver. diff --git a/Documentation/video4linux/v4l2-pci-skeleton.c b/Documentation/video4linux/v4l2-pci-skeleton.c deleted file mode 100644 index 79af0c041056..000000000000 --- a/Documentation/video4linux/v4l2-pci-skeleton.c +++ /dev/null @@ -1,923 +0,0 @@ -/* - * This is a V4L2 PCI Skeleton Driver. It gives an initial skeleton source - * for use with other PCI drivers. - * - * This skeleton PCI driver assumes that the card has an S-Video connector as - * input 0 and an HDMI connector as input 1. - * - * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved. - * - * This program is free software; you may redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - */ - -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/kmod.h> -#include <linux/mutex.h> -#include <linux/pci.h> -#include <linux/interrupt.h> -#include <linux/videodev2.h> -#include <linux/v4l2-dv-timings.h> -#include <media/v4l2-device.h> -#include <media/v4l2-dev.h> -#include <media/v4l2-ioctl.h> -#include <media/v4l2-dv-timings.h> -#include <media/v4l2-ctrls.h> -#include <media/v4l2-event.h> -#include <media/videobuf2-v4l2.h> -#include <media/videobuf2-dma-contig.h> - -MODULE_DESCRIPTION("V4L2 PCI Skeleton Driver"); -MODULE_AUTHOR("Hans Verkuil"); -MODULE_LICENSE("GPL v2"); - -/** - * struct skeleton - All internal data for one instance of device - * @pdev: PCI device - * @v4l2_dev: top-level v4l2 device struct - * @vdev: video node structure - * @ctrl_handler: control handler structure - * @lock: ioctl serialization mutex - * @std: current SDTV standard - * @timings: current HDTV timings - * @format: current pix format - * @input: current video input (0 = SDTV, 1 = HDTV) - * @queue: vb2 video capture queue - * @alloc_ctx: vb2 contiguous DMA context - * @qlock: spinlock controlling access to buf_list and sequence - * @buf_list: list of buffers queued for DMA - * @sequence: frame sequence counter - */ -struct skeleton { - struct pci_dev *pdev; - struct v4l2_device v4l2_dev; - struct video_device vdev; - struct v4l2_ctrl_handler ctrl_handler; - struct mutex lock; - v4l2_std_id std; - struct v4l2_dv_timings timings; - struct v4l2_pix_format format; - unsigned input; - - struct vb2_queue queue; - struct vb2_alloc_ctx *alloc_ctx; - - spinlock_t qlock; - struct list_head buf_list; - unsigned field; - unsigned sequence; -}; - -struct skel_buffer { - struct vb2_buffer vb; - struct list_head list; -}; - -static inline struct skel_buffer *to_skel_buffer(struct vb2_buffer *vb2) -{ - return container_of(vb2, struct skel_buffer, vb); -} - -static const struct pci_device_id skeleton_pci_tbl[] = { - /* { PCI_DEVICE(PCI_VENDOR_ID_, PCI_DEVICE_ID_) }, */ - { 0, } -}; -MODULE_DEVICE_TABLE(pci, skeleton_pci_tbl); - -/* - * HDTV: this structure has the capabilities of the HDTV receiver. - * It is used to constrain the huge list of possible formats based - * upon the hardware capabilities. - */ -static const struct v4l2_dv_timings_cap skel_timings_cap = { - .type = V4L2_DV_BT_656_1120, - /* keep this initialization for compatibility with GCC < 4.4.6 */ - .reserved = { 0 }, - V4L2_INIT_BT_TIMINGS( - 720, 1920, /* min/max width */ - 480, 1080, /* min/max height */ - 27000000, 74250000, /* min/max pixelclock*/ - V4L2_DV_BT_STD_CEA861, /* Supported standards */ - /* capabilities */ - V4L2_DV_BT_CAP_INTERLACED | V4L2_DV_BT_CAP_PROGRESSIVE - ) -}; - -/* - * Supported SDTV standards. This does the same job as skel_timings_cap, but - * for standard TV formats. - */ -#define SKEL_TVNORMS V4L2_STD_ALL - -/* - * Interrupt handler: typically interrupts happen after a new frame has been - * captured. It is the job of the handler to remove the new frame from the - * internal list and give it back to the vb2 framework, updating the sequence - * counter, field and timestamp at the same time. - */ -static irqreturn_t skeleton_irq(int irq, void *dev_id) -{ -#ifdef TODO - struct skeleton *skel = dev_id; - - /* handle interrupt */ - - /* Once a new frame has been captured, mark it as done like this: */ - if (captured_new_frame) { - ... - spin_lock(&skel->qlock); - list_del(&new_buf->list); - spin_unlock(&skel->qlock); - v4l2_get_timestamp(&new_buf->vb.v4l2_buf.timestamp); - new_buf->vb.v4l2_buf.sequence = skel->sequence++; - new_buf->vb.v4l2_buf.field = skel->field; - if (skel->format.field == V4L2_FIELD_ALTERNATE) { - if (skel->field == V4L2_FIELD_BOTTOM) - skel->field = V4L2_FIELD_TOP; - else if (skel->field == V4L2_FIELD_TOP) - skel->field = V4L2_FIELD_BOTTOM; - } - vb2_buffer_done(&new_buf->vb, VB2_BUF_STATE_DONE); - } -#endif - return IRQ_HANDLED; -} - -/* - * Setup the constraints of the queue: besides setting the number of planes - * per buffer and the size and allocation context of each plane, it also - * checks if sufficient buffers have been allocated. Usually 3 is a good - * minimum number: many DMA engines need a minimum of 2 buffers in the - * queue and you need to have another available for userspace processing. - */ -static int queue_setup(struct vb2_queue *vq, - unsigned int *nbuffers, unsigned int *nplanes, - unsigned int sizes[], void *alloc_ctxs[]) -{ - struct skeleton *skel = vb2_get_drv_priv(vq); - - skel->field = skel->format.field; - if (skel->field == V4L2_FIELD_ALTERNATE) { - /* - * You cannot use read() with FIELD_ALTERNATE since the field - * information (TOP/BOTTOM) cannot be passed back to the user. - */ - if (vb2_fileio_is_active(vq)) - return -EINVAL; - skel->field = V4L2_FIELD_TOP; - } - - if (vq->num_buffers + *nbuffers < 3) - *nbuffers = 3 - vq->num_buffers; - alloc_ctxs[0] = skel->alloc_ctx; - - if (*nplanes) - return sizes[0] < skel->format.sizeimage ? -EINVAL : 0; - *nplanes = 1; - sizes[0] = skel->format.sizeimage; - return 0; -} - -/* - * Prepare the buffer for queueing to the DMA engine: check and set the - * payload size. - */ -static int buffer_prepare(struct vb2_buffer *vb) -{ - struct skeleton *skel = vb2_get_drv_priv(vb->vb2_queue); - unsigned long size = skel->format.sizeimage; - - if (vb2_plane_size(vb, 0) < size) { - dev_err(&skel->pdev->dev, "buffer too small (%lu < %lu)\n", - vb2_plane_size(vb, 0), size); - return -EINVAL; - } - - vb2_set_plane_payload(vb, 0, size); - return 0; -} - -/* - * Queue this buffer to the DMA engine. - */ -static void buffer_queue(struct vb2_buffer *vb) -{ - struct skeleton *skel = vb2_get_drv_priv(vb->vb2_queue); - struct skel_buffer *buf = to_skel_buffer(vb); - unsigned long flags; - - spin_lock_irqsave(&skel->qlock, flags); - list_add_tail(&buf->list, &skel->buf_list); - - /* TODO: Update any DMA pointers if necessary */ - - spin_unlock_irqrestore(&skel->qlock, flags); -} - -static void return_all_buffers(struct skeleton *skel, - enum vb2_buffer_state state) -{ - struct skel_buffer *buf, *node; - unsigned long flags; - - spin_lock_irqsave(&skel->qlock, flags); - list_for_each_entry_safe(buf, node, &skel->buf_list, list) { - vb2_buffer_done(&buf->vb, state); - list_del(&buf->list); - } - spin_unlock_irqrestore(&skel->qlock, flags); -} - -/* - * Start streaming. First check if the minimum number of buffers have been - * queued. If not, then return -ENOBUFS and the vb2 framework will call - * this function again the next time a buffer has been queued until enough - * buffers are available to actually start the DMA engine. - */ -static int start_streaming(struct vb2_queue *vq, unsigned int count) -{ - struct skeleton *skel = vb2_get_drv_priv(vq); - int ret = 0; - - skel->sequence = 0; - - /* TODO: start DMA */ - - if (ret) { - /* - * In case of an error, return all active buffers to the - * QUEUED state - */ - return_all_buffers(skel, VB2_BUF_STATE_QUEUED); - } - return ret; -} - -/* - * Stop the DMA engine. Any remaining buffers in the DMA queue are dequeued - * and passed on to the vb2 framework marked as STATE_ERROR. - */ -static void stop_streaming(struct vb2_queue *vq) -{ - struct skeleton *skel = vb2_get_drv_priv(vq); - - /* TODO: stop DMA */ - - /* Release all active buffers */ - return_all_buffers(skel, VB2_BUF_STATE_ERROR); -} - -/* - * The vb2 queue ops. Note that since q->lock is set we can use the standard - * vb2_ops_wait_prepare/finish helper functions. If q->lock would be NULL, - * then this driver would have to provide these ops. - */ -static struct vb2_ops skel_qops = { - .queue_setup = queue_setup, - .buf_prepare = buffer_prepare, - .buf_queue = buffer_queue, - .start_streaming = start_streaming, - .stop_streaming = stop_streaming, - .wait_prepare = vb2_ops_wait_prepare, - .wait_finish = vb2_ops_wait_finish, -}; - -/* - * Required ioctl querycap. Note that the version field is prefilled with - * the version of the kernel. - */ -static int skeleton_querycap(struct file *file, void *priv, - struct v4l2_capability *cap) -{ - struct skeleton *skel = video_drvdata(file); - - strlcpy(cap->driver, KBUILD_MODNAME, sizeof(cap->driver)); - strlcpy(cap->card, "V4L2 PCI Skeleton", sizeof(cap->card)); - snprintf(cap->bus_info, sizeof(cap->bus_info), "PCI:%s", - pci_name(skel->pdev)); - cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE | - V4L2_CAP_STREAMING; - cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; - return 0; -} - -/* - * Helper function to check and correct struct v4l2_pix_format. It's used - * not only in VIDIOC_TRY/S_FMT, but also elsewhere if changes to the SDTV - * standard, HDTV timings or the video input would require updating the - * current format. - */ -static void skeleton_fill_pix_format(struct skeleton *skel, - struct v4l2_pix_format *pix) -{ - pix->pixelformat = V4L2_PIX_FMT_YUYV; - if (skel->input == 0) { - /* S-Video input */ - pix->width = 720; - pix->height = (skel->std & V4L2_STD_525_60) ? 480 : 576; - pix->field = V4L2_FIELD_INTERLACED; - pix->colorspace = V4L2_COLORSPACE_SMPTE170M; - } else { - /* HDMI input */ - pix->width = skel->timings.bt.width; - pix->height = skel->timings.bt.height; - if (skel->timings.bt.interlaced) { - pix->field = V4L2_FIELD_ALTERNATE; - pix->height /= 2; - } else { - pix->field = V4L2_FIELD_NONE; - } - pix->colorspace = V4L2_COLORSPACE_REC709; - } - - /* - * The YUYV format is four bytes for every two pixels, so bytesperline - * is width * 2. - */ - pix->bytesperline = pix->width * 2; - pix->sizeimage = pix->bytesperline * pix->height; - pix->priv = 0; -} - -static int skeleton_try_fmt_vid_cap(struct file *file, void *priv, - struct v4l2_format *f) -{ - struct skeleton *skel = video_drvdata(file); - struct v4l2_pix_format *pix = &f->fmt.pix; - - /* - * Due to historical reasons providing try_fmt with an unsupported - * pixelformat will return -EINVAL for video receivers. Webcam drivers, - * however, will silently correct the pixelformat. Some video capture - * applications rely on this behavior... - */ - if (pix->pixelformat != V4L2_PIX_FMT_YUYV) - return -EINVAL; - skeleton_fill_pix_format(skel, pix); - return 0; -} - -static int skeleton_s_fmt_vid_cap(struct file *file, void *priv, - struct v4l2_format *f) -{ - struct skeleton *skel = video_drvdata(file); - int ret; - - ret = skeleton_try_fmt_vid_cap(file, priv, f); - if (ret) - return ret; - - /* - * It is not allowed to change the format while buffers for use with - * streaming have already been allocated. - */ - if (vb2_is_busy(&skel->queue)) - return -EBUSY; - - /* TODO: change format */ - skel->format = f->fmt.pix; - return 0; -} - -static int skeleton_g_fmt_vid_cap(struct file *file, void *priv, - struct v4l2_format *f) -{ - struct skeleton *skel = video_drvdata(file); - - f->fmt.pix = skel->format; - return 0; -} - -static int skeleton_enum_fmt_vid_cap(struct file *file, void *priv, - struct v4l2_fmtdesc *f) -{ - if (f->index != 0) - return -EINVAL; - - f->pixelformat = V4L2_PIX_FMT_YUYV; - return 0; -} - -static int skeleton_s_std(struct file *file, void *priv, v4l2_std_id std) -{ - struct skeleton *skel = video_drvdata(file); - - /* S_STD is not supported on the HDMI input */ - if (skel->input) - return -ENODATA; - - /* - * No change, so just return. Some applications call S_STD again after - * the buffers for streaming have been set up, so we have to allow for - * this behavior. - */ - if (std == skel->std) - return 0; - - /* - * Changing the standard implies a format change, which is not allowed - * while buffers for use with streaming have already been allocated. - */ - if (vb2_is_busy(&skel->queue)) - return -EBUSY; - - /* TODO: handle changing std */ - - skel->std = std; - - /* Update the internal format */ - skeleton_fill_pix_format(skel, &skel->format); - return 0; -} - -static int skeleton_g_std(struct file *file, void *priv, v4l2_std_id *std) -{ - struct skeleton *skel = video_drvdata(file); - - /* G_STD is not supported on the HDMI input */ - if (skel->input) - return -ENODATA; - - *std = skel->std; - return 0; -} - -/* - * Query the current standard as seen by the hardware. This function shall - * never actually change the standard, it just detects and reports. - * The framework will initially set *std to tvnorms (i.e. the set of - * supported standards by this input), and this function should just AND - * this value. If there is no signal, then *std should be set to 0. - */ -static int skeleton_querystd(struct file *file, void *priv, v4l2_std_id *std) -{ - struct skeleton *skel = video_drvdata(file); - - /* QUERY_STD is not supported on the HDMI input */ - if (skel->input) - return -ENODATA; - -#ifdef TODO - /* - * Query currently seen standard. Initial value of *std is - * V4L2_STD_ALL. This function should look something like this: - */ - get_signal_info(); - if (no_signal) { - *std = 0; - return 0; - } - /* Use signal information to reduce the number of possible standards */ - if (signal_has_525_lines) - *std &= V4L2_STD_525_60; - else - *std &= V4L2_STD_625_50; -#endif - return 0; -} - -static int skeleton_s_dv_timings(struct file *file, void *_fh, - struct v4l2_dv_timings *timings) -{ - struct skeleton *skel = video_drvdata(file); - - /* S_DV_TIMINGS is not supported on the S-Video input */ - if (skel->input == 0) - return -ENODATA; - - /* Quick sanity check */ - if (!v4l2_valid_dv_timings(timings, &skel_timings_cap, NULL, NULL)) - return -EINVAL; - - /* Check if the timings are part of the CEA-861 timings. */ - if (!v4l2_find_dv_timings_cap(timings, &skel_timings_cap, - 0, NULL, NULL)) - return -EINVAL; - - /* Return 0 if the new timings are the same as the current timings. */ - if (v4l2_match_dv_timings(timings, &skel->timings, 0, false)) - return 0; - - /* - * Changing the timings implies a format change, which is not allowed - * while buffers for use with streaming have already been allocated. - */ - if (vb2_is_busy(&skel->queue)) - return -EBUSY; - - /* TODO: Configure new timings */ - - /* Save timings */ - skel->timings = *timings; - - /* Update the internal format */ - skeleton_fill_pix_format(skel, &skel->format); - return 0; -} - -static int skeleton_g_dv_timings(struct file *file, void *_fh, - struct v4l2_dv_timings *timings) -{ - struct skeleton *skel = video_drvdata(file); - - /* G_DV_TIMINGS is not supported on the S-Video input */ - if (skel->input == 0) - return -ENODATA; - - *timings = skel->timings; - return 0; -} - -static int skeleton_enum_dv_timings(struct file *file, void *_fh, - struct v4l2_enum_dv_timings *timings) -{ - struct skeleton *skel = video_drvdata(file); - - /* ENUM_DV_TIMINGS is not supported on the S-Video input */ - if (skel->input == 0) - return -ENODATA; - - return v4l2_enum_dv_timings_cap(timings, &skel_timings_cap, - NULL, NULL); -} - -/* - * Query the current timings as seen by the hardware. This function shall - * never actually change the timings, it just detects and reports. - * If no signal is detected, then return -ENOLINK. If the hardware cannot - * lock to the signal, then return -ENOLCK. If the signal is out of range - * of the capabilities of the system (e.g., it is possible that the receiver - * can lock but that the DMA engine it is connected to cannot handle - * pixelclocks above a certain frequency), then -ERANGE is returned. - */ -static int skeleton_query_dv_timings(struct file *file, void *_fh, - struct v4l2_dv_timings *timings) -{ - struct skeleton *skel = video_drvdata(file); - - /* QUERY_DV_TIMINGS is not supported on the S-Video input */ - if (skel->input == 0) - return -ENODATA; - -#ifdef TODO - /* - * Query currently seen timings. This function should look - * something like this: - */ - detect_timings(); - if (no_signal) - return -ENOLINK; - if (cannot_lock_to_signal) - return -ENOLCK; - if (signal_out_of_range_of_capabilities) - return -ERANGE; - - /* Useful for debugging */ - v4l2_print_dv_timings(skel->v4l2_dev.name, "query_dv_timings:", - timings, true); -#endif - return 0; -} - -static int skeleton_dv_timings_cap(struct file *file, void *fh, - struct v4l2_dv_timings_cap *cap) -{ - struct skeleton *skel = video_drvdata(file); - - /* DV_TIMINGS_CAP is not supported on the S-Video input */ - if (skel->input == 0) - return -ENODATA; - *cap = skel_timings_cap; - return 0; -} - -static int skeleton_enum_input(struct file *file, void *priv, - struct v4l2_input *i) -{ - if (i->index > 1) - return -EINVAL; - - i->type = V4L2_INPUT_TYPE_CAMERA; - if (i->index == 0) { - i->std = SKEL_TVNORMS; - strlcpy(i->name, "S-Video", sizeof(i->name)); - i->capabilities = V4L2_IN_CAP_STD; - } else { - i->std = 0; - strlcpy(i->name, "HDMI", sizeof(i->name)); - i->capabilities = V4L2_IN_CAP_DV_TIMINGS; - } - return 0; -} - -static int skeleton_s_input(struct file *file, void *priv, unsigned int i) -{ - struct skeleton *skel = video_drvdata(file); - - if (i > 1) - return -EINVAL; - - /* - * Changing the input implies a format change, which is not allowed - * while buffers for use with streaming have already been allocated. - */ - if (vb2_is_busy(&skel->queue)) - return -EBUSY; - - skel->input = i; - /* - * Update tvnorms. The tvnorms value is used by the core to implement - * VIDIOC_ENUMSTD so it has to be correct. If tvnorms == 0, then - * ENUMSTD will return -ENODATA. - */ - skel->vdev.tvnorms = i ? 0 : SKEL_TVNORMS; - - /* Update the internal format */ - skeleton_fill_pix_format(skel, &skel->format); - return 0; -} - -static int skeleton_g_input(struct file *file, void *priv, unsigned int *i) -{ - struct skeleton *skel = video_drvdata(file); - - *i = skel->input; - return 0; -} - -/* The control handler. */ -static int skeleton_s_ctrl(struct v4l2_ctrl *ctrl) -{ - /*struct skeleton *skel = - container_of(ctrl->handler, struct skeleton, ctrl_handler);*/ - - switch (ctrl->id) { - case V4L2_CID_BRIGHTNESS: - /* TODO: set brightness to ctrl->val */ - break; - case V4L2_CID_CONTRAST: - /* TODO: set contrast to ctrl->val */ - break; - case V4L2_CID_SATURATION: - /* TODO: set saturation to ctrl->val */ - break; - case V4L2_CID_HUE: - /* TODO: set hue to ctrl->val */ - break; - default: - return -EINVAL; - } - return 0; -} - -/* ------------------------------------------------------------------ - File operations for the device - ------------------------------------------------------------------*/ - -static const struct v4l2_ctrl_ops skel_ctrl_ops = { - .s_ctrl = skeleton_s_ctrl, -}; - -/* - * The set of all supported ioctls. Note that all the streaming ioctls - * use the vb2 helper functions that take care of all the locking and - * that also do ownership tracking (i.e. only the filehandle that requested - * the buffers can call the streaming ioctls, all other filehandles will - * receive -EBUSY if they attempt to call the same streaming ioctls). - * - * The last three ioctls also use standard helper functions: these implement - * standard behavior for drivers with controls. - */ -static const struct v4l2_ioctl_ops skel_ioctl_ops = { - .vidioc_querycap = skeleton_querycap, - .vidioc_try_fmt_vid_cap = skeleton_try_fmt_vid_cap, - .vidioc_s_fmt_vid_cap = skeleton_s_fmt_vid_cap, - .vidioc_g_fmt_vid_cap = skeleton_g_fmt_vid_cap, - .vidioc_enum_fmt_vid_cap = skeleton_enum_fmt_vid_cap, - - .vidioc_g_std = skeleton_g_std, - .vidioc_s_std = skeleton_s_std, - .vidioc_querystd = skeleton_querystd, - - .vidioc_s_dv_timings = skeleton_s_dv_timings, - .vidioc_g_dv_timings = skeleton_g_dv_timings, - .vidioc_enum_dv_timings = skeleton_enum_dv_timings, - .vidioc_query_dv_timings = skeleton_query_dv_timings, - .vidioc_dv_timings_cap = skeleton_dv_timings_cap, - - .vidioc_enum_input = skeleton_enum_input, - .vidioc_g_input = skeleton_g_input, - .vidioc_s_input = skeleton_s_input, - - .vidioc_reqbufs = vb2_ioctl_reqbufs, - .vidioc_create_bufs = vb2_ioctl_create_bufs, - .vidioc_querybuf = vb2_ioctl_querybuf, - .vidioc_qbuf = vb2_ioctl_qbuf, - .vidioc_dqbuf = vb2_ioctl_dqbuf, - .vidioc_expbuf = vb2_ioctl_expbuf, - .vidioc_streamon = vb2_ioctl_streamon, - .vidioc_streamoff = vb2_ioctl_streamoff, - - .vidioc_log_status = v4l2_ctrl_log_status, - .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, - .vidioc_unsubscribe_event = v4l2_event_unsubscribe, -}; - -/* - * The set of file operations. Note that all these ops are standard core - * helper functions. - */ -static const struct v4l2_file_operations skel_fops = { - .owner = THIS_MODULE, - .open = v4l2_fh_open, - .release = vb2_fop_release, - .unlocked_ioctl = video_ioctl2, - .read = vb2_fop_read, - .mmap = vb2_fop_mmap, - .poll = vb2_fop_poll, -}; - -/* - * The initial setup of this device instance. Note that the initial state of - * the driver should be complete. So the initial format, standard, timings - * and video input should all be initialized to some reasonable value. - */ -static int skeleton_probe(struct pci_dev *pdev, const struct pci_device_id *ent) -{ - /* The initial timings are chosen to be 720p60. */ - static const struct v4l2_dv_timings timings_def = - V4L2_DV_BT_CEA_1280X720P60; - struct skeleton *skel; - struct video_device *vdev; - struct v4l2_ctrl_handler *hdl; - struct vb2_queue *q; - int ret; - - /* Enable PCI */ - ret = pci_enable_device(pdev); - if (ret) - return ret; - ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); - if (ret) { - dev_err(&pdev->dev, "no suitable DMA available.\n"); - goto disable_pci; - } - - /* Allocate a new instance */ - skel = devm_kzalloc(&pdev->dev, sizeof(struct skeleton), GFP_KERNEL); - if (!skel) - return -ENOMEM; - - /* Allocate the interrupt */ - ret = devm_request_irq(&pdev->dev, pdev->irq, - skeleton_irq, 0, KBUILD_MODNAME, skel); - if (ret) { - dev_err(&pdev->dev, "request_irq failed\n"); - goto disable_pci; - } - skel->pdev = pdev; - - /* Fill in the initial format-related settings */ - skel->timings = timings_def; - skel->std = V4L2_STD_625_50; - skeleton_fill_pix_format(skel, &skel->format); - - /* Initialize the top-level structure */ - ret = v4l2_device_register(&pdev->dev, &skel->v4l2_dev); - if (ret) - goto disable_pci; - - mutex_init(&skel->lock); - - /* Add the controls */ - hdl = &skel->ctrl_handler; - v4l2_ctrl_handler_init(hdl, 4); - v4l2_ctrl_new_std(hdl, &skel_ctrl_ops, - V4L2_CID_BRIGHTNESS, 0, 255, 1, 127); - v4l2_ctrl_new_std(hdl, &skel_ctrl_ops, - V4L2_CID_CONTRAST, 0, 255, 1, 16); - v4l2_ctrl_new_std(hdl, &skel_ctrl_ops, - V4L2_CID_SATURATION, 0, 255, 1, 127); - v4l2_ctrl_new_std(hdl, &skel_ctrl_ops, - V4L2_CID_HUE, -128, 127, 1, 0); - if (hdl->error) { - ret = hdl->error; - goto free_hdl; - } - skel->v4l2_dev.ctrl_handler = hdl; - - /* Initialize the vb2 queue */ - q = &skel->queue; - q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - q->io_modes = VB2_MMAP | VB2_DMABUF | VB2_READ; - q->drv_priv = skel; - q->buf_struct_size = sizeof(struct skel_buffer); - q->ops = &skel_qops; - q->mem_ops = &vb2_dma_contig_memops; - q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; - /* - * Assume that this DMA engine needs to have at least two buffers - * available before it can be started. The start_streaming() op - * won't be called until at least this many buffers are queued up. - */ - q->min_buffers_needed = 2; - /* - * The serialization lock for the streaming ioctls. This is the same - * as the main serialization lock, but if some of the non-streaming - * ioctls could take a long time to execute, then you might want to - * have a different lock here to prevent VIDIOC_DQBUF from being - * blocked while waiting for another action to finish. This is - * generally not needed for PCI devices, but USB devices usually do - * want a separate lock here. - */ - q->lock = &skel->lock; - /* - * Since this driver can only do 32-bit DMA we must make sure that - * the vb2 core will allocate the buffers in 32-bit DMA memory. - */ - q->gfp_flags = GFP_DMA32; - ret = vb2_queue_init(q); - if (ret) - goto free_hdl; - - skel->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev); - if (IS_ERR(skel->alloc_ctx)) { - dev_err(&pdev->dev, "Can't allocate buffer context"); - ret = PTR_ERR(skel->alloc_ctx); - goto free_hdl; - } - INIT_LIST_HEAD(&skel->buf_list); - spin_lock_init(&skel->qlock); - - /* Initialize the video_device structure */ - vdev = &skel->vdev; - strlcpy(vdev->name, KBUILD_MODNAME, sizeof(vdev->name)); - /* - * There is nothing to clean up, so release is set to an empty release - * function. The release callback must be non-NULL. - */ - vdev->release = video_device_release_empty; - vdev->fops = &skel_fops, - vdev->ioctl_ops = &skel_ioctl_ops, - /* - * The main serialization lock. All ioctls are serialized by this - * lock. Exception: if q->lock is set, then the streaming ioctls - * are serialized by that separate lock. - */ - vdev->lock = &skel->lock; - vdev->queue = q; - vdev->v4l2_dev = &skel->v4l2_dev; - /* Supported SDTV standards, if any */ - vdev->tvnorms = SKEL_TVNORMS; - video_set_drvdata(vdev, skel); - - ret = video_register_device(vdev, VFL_TYPE_GRABBER, -1); - if (ret) - goto free_ctx; - - dev_info(&pdev->dev, "V4L2 PCI Skeleton Driver loaded\n"); - return 0; - -free_ctx: - vb2_dma_contig_cleanup_ctx(skel->alloc_ctx); -free_hdl: - v4l2_ctrl_handler_free(&skel->ctrl_handler); - v4l2_device_unregister(&skel->v4l2_dev); -disable_pci: - pci_disable_device(pdev); - return ret; -} - -static void skeleton_remove(struct pci_dev *pdev) -{ - struct v4l2_device *v4l2_dev = pci_get_drvdata(pdev); - struct skeleton *skel = container_of(v4l2_dev, struct skeleton, v4l2_dev); - - video_unregister_device(&skel->vdev); - v4l2_ctrl_handler_free(&skel->ctrl_handler); - vb2_dma_contig_cleanup_ctx(skel->alloc_ctx); - v4l2_device_unregister(&skel->v4l2_dev); - pci_disable_device(skel->pdev); -} - -static struct pci_driver skeleton_driver = { - .name = KBUILD_MODNAME, - .probe = skeleton_probe, - .remove = skeleton_remove, - .id_table = skeleton_pci_tbl, -}; - -module_pci_driver(skeleton_driver); diff --git a/Documentation/video4linux/vivid.txt b/Documentation/video4linux/vivid.txt index e35d376b7f64..8da5d2a576bc 100644 --- a/Documentation/video4linux/vivid.txt +++ b/Documentation/video4linux/vivid.txt @@ -294,7 +294,7 @@ the result will be. These inputs support all combinations of the field setting. Special care has been taken to faithfully reproduce how fields are handled for the different -TV standards. This is particularly noticable when generating a horizontally +TV standards. This is particularly noticeable when generating a horizontally moving image so the temporal effect of using interlaced formats becomes clearly visible. For 50 Hz standards the top field is the oldest and the bottom field is the newest in time. For 60 Hz standards that is reversed: the bottom field @@ -313,7 +313,7 @@ will be SMPTE-170M. The pixel aspect ratio will depend on the TV standard. The video aspect ratio can be selected through the 'Standard Aspect Ratio' Vivid control. Choices are '4x3', '16x9' which will give letterboxed widescreen video and -'16x9 Anomorphic' which will give full screen squashed anamorphic widescreen +'16x9 Anamorphic' which will give full screen squashed anamorphic widescreen video that will need to be scaled accordingly. The TV 'tuner' supports a frequency range of 44-958 MHz. Channels are available @@ -862,7 +862,7 @@ RDS Radio Text: RDS Stereo: RDS Artificial Head: RDS Compressed: -RDS Dymanic PTY: +RDS Dynamic PTY: RDS Traffic Announcement: RDS Traffic Program: RDS Music: these are all controls that set the RDS data that is transmitted by diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index 4d0542c5206b..a4482cce4bae 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -199,8 +199,8 @@ Type: vm ioctl Parameters: vcpu id (apic id on x86) Returns: vcpu fd on success, -1 on error -This API adds a vcpu to a virtual machine. The vcpu id is a small integer -in the range [0, max_vcpus). +This API adds a vcpu to a virtual machine. No more than max_vcpus may be added. +The vcpu id is an integer in the range [0, max_vcpu_id). The recommended max_vcpus value can be retrieved using the KVM_CAP_NR_VCPUS of the KVM_CHECK_EXTENSION ioctl() at run-time. @@ -212,6 +212,12 @@ cpus max. If the KVM_CAP_MAX_VCPUS does not exist, you should assume that max_vcpus is same as the value returned from KVM_CAP_NR_VCPUS. +The maximum possible value for max_vcpu_id can be retrieved using the +KVM_CAP_MAX_VCPU_ID of the KVM_CHECK_EXTENSION ioctl() at run-time. + +If the KVM_CAP_MAX_VCPU_ID does not exist, you should assume that max_vcpu_id +is the same as the value returned from KVM_CAP_MAX_VCPUS. + On powerpc using book3s_hv mode, the vcpus are mapped onto virtual threads in one or more virtual CPU cores. (This is because the hardware requires all the hardware threads in a CPU core to be in the @@ -3788,6 +3794,14 @@ a KVM_EXIT_IOAPIC_EOI vmexit will be reported to userspace. Fails if VCPU has already been created, or if the irqchip is already in the kernel (i.e. KVM_CREATE_IRQCHIP has already been called). +7.6 KVM_CAP_S390_RI + +Architectures: s390 +Parameters: none + +Allows use of runtime-instrumentation introduced with zEC12 processor. +Will return -EINVAL if the machine does not support runtime-instrumentation. +Will return -EBUSY if a VCPU has already been created. 8. Other capabilities. ---------------------- diff --git a/Documentation/virtual/kvm/devices/s390_flic.txt b/Documentation/virtual/kvm/devices/s390_flic.txt index e3e314cb83e8..6b0e115301c8 100644 --- a/Documentation/virtual/kvm/devices/s390_flic.txt +++ b/Documentation/virtual/kvm/devices/s390_flic.txt @@ -11,6 +11,7 @@ FLIC provides support to - add interrupts (KVM_DEV_FLIC_ENQUEUE) - inspect currently pending interrupts (KVM_FLIC_GET_ALL_IRQS) - purge all pending floating interrupts (KVM_DEV_FLIC_CLEAR_IRQS) +- purge one pending floating I/O interrupt (KVM_DEV_FLIC_CLEAR_IO_IRQ) - enable/disable for the guest transparent async page faults - register and modify adapter interrupt sources (KVM_DEV_FLIC_ADAPTER_*) @@ -40,6 +41,11 @@ Groups: Simply deletes all elements from the list of currently pending floating interrupts. No interrupts are injected into the guest. + KVM_DEV_FLIC_CLEAR_IO_IRQ + Deletes one (if any) I/O interrupt for a subchannel identified by the + subsystem identification word passed via the buffer specified by + attr->addr (address) and attr->attr (length). + KVM_DEV_FLIC_APF_ENABLE Enables async page faults for the guest. So in case of a major page fault the host is allowed to handle this async and continues the guest. @@ -68,7 +74,7 @@ struct kvm_s390_io_adapter { KVM_DEV_FLIC_ADAPTER_MODIFY Modifies attributes of an existing I/O adapter interrupt source. Takes - a kvm_s390_io_adapter_req specifiying the adapter and the operation: + a kvm_s390_io_adapter_req specifying the adapter and the operation: struct kvm_s390_io_adapter_req { __u32 id; @@ -94,3 +100,9 @@ struct kvm_s390_io_adapter_req { KVM_S390_IO_ADAPTER_UNMAP release a userspace page for the translated address specified in addr from the list of mappings + +Note: The KVM_SET_DEVICE_ATTR/KVM_GET_DEVICE_ATTR device ioctls executed on +FLIC with an unknown group or attribute gives the error code EINVAL (instead of +ENXIO, as specified in the API documentation). It is not possible to conclude +that a FLIC operation is unavailable based on the error code resulting from a +usage attempt. diff --git a/Documentation/vm/hugetlbpage.txt b/Documentation/vm/hugetlbpage.txt index 54dd9b9c6c31..59cbc803aad6 100644 --- a/Documentation/vm/hugetlbpage.txt +++ b/Documentation/vm/hugetlbpage.txt @@ -220,7 +220,7 @@ resulting effect on persistent huge page allocation is as follows: node list of "all" with numactl --interleave or --membind [-m] to achieve interleaving over all nodes in the system or cpuset. -4) Any task mempolicy specifed--e.g., using numactl--will be constrained by +4) Any task mempolicy specified--e.g., using numactl--will be constrained by the resource limits of any cpuset in which the task runs. Thus, there will be no way for a task with non-default policy running in a cpuset with a subset of the system nodes to allocate huge pages outside the cpuset @@ -275,10 +275,10 @@ This command mounts a (pseudo) filesystem of type hugetlbfs on the directory options sets the owner and group of the root of the file system. By default the uid and gid of the current process are taken. The mode option sets the mode of root of file system to value & 01777. This value is given in octal. -By default the value 0755 is picked. If the paltform supports multiple huge +By default the value 0755 is picked. If the platform supports multiple huge page sizes, the pagesize option can be used to specify the huge page size and associated pool. pagesize is specified in bytes. If pagesize is not specified -the paltform's default huge page size and associated pool will be used. The +the platform's default huge page size and associated pool will be used. The size option sets the maximum value of memory (huge pages) allowed for that filesystem (/mnt/huge). The size option can be specified in bytes, or as a percentage of the specified huge page pool (nr_hugepages). The size is diff --git a/Documentation/vm/pagemap.txt b/Documentation/vm/pagemap.txt index 0e1e55588b59..eafcefa15261 100644 --- a/Documentation/vm/pagemap.txt +++ b/Documentation/vm/pagemap.txt @@ -62,7 +62,7 @@ There are four components to pagemap: 14. SWAPBACKED 15. COMPOUND_HEAD 16. COMPOUND_TAIL - 16. HUGE + 17. HUGE 18. UNEVICTABLE 19. HWPOISON 20. NOPAGE diff --git a/Documentation/vm/transhuge.txt b/Documentation/vm/transhuge.txt index d9cb65cf5cfd..7c871d6beb63 100644 --- a/Documentation/vm/transhuge.txt +++ b/Documentation/vm/transhuge.txt @@ -340,7 +340,7 @@ unaffected. libhugetlbfs will also work fine as usual. == Graceful fallback == -Code walking pagetables but unware about huge pmds can simply call +Code walking pagetables but unaware about huge pmds can simply call split_huge_pmd(vma, pmd, addr) where the pmd is the one returned by pmd_offset. It's trivial to make the code transparent hugepage aware by just grepping for "pmd_offset" and adding split_huge_pmd where @@ -394,9 +394,9 @@ hugepage natively. Once finished you can drop the page table lock. Refcounting on THP is mostly consistent with refcounting on other compound pages: - - get_page()/put_page() and GUP operate in head page's ->_count. + - get_page()/put_page() and GUP operate in head page's ->_refcount. - - ->_count in tail pages is always zero: get_page_unless_zero() never + - ->_refcount in tail pages is always zero: get_page_unless_zero() never succeed on tail pages. - map/unmap of the pages with PTE entry increment/decrement ->_mapcount @@ -414,7 +414,7 @@ tracking. The alternative is alter ->_mapcount in all subpages on each map/unmap of the whole compound page. We set PG_double_map when a PMD of the page got split for the first time, -but still have PMD mapping. The addtional references go away with last +but still have PMD mapping. The additional references go away with last compound_mapcount. split_huge_page internally has to distribute the refcounts in the head @@ -426,16 +426,16 @@ requests to split pinned huge page: it expects page count to be equal to sum of mapcount of all sub-pages plus one (split_huge_page caller must have reference for head page). -split_huge_page uses migration entries to stabilize page->_count and +split_huge_page uses migration entries to stabilize page->_refcount and page->_mapcount. We safe against physical memory scanners too: the only legitimate way scanner can get reference to a page is get_page_unless_zero(). -All tail pages has zero ->_count until atomic_add(). It prevent scanner -from geting reference to tail page up to the point. After the atomic_add() -we don't care about ->_count value. We already known how many references -with should uncharge from head page. +All tail pages have zero ->_refcount until atomic_add(). This prevents the +scanner from getting a reference to the tail page up to that point. After the +atomic_add() we don't care about the ->_refcount value. We already known how +many references should be uncharged from the head page. For head page get_page_unless_zero() will succeed and we don't mind. It's clear where reference should go after split: it will stay on head page. diff --git a/Documentation/vm/z3fold.txt b/Documentation/vm/z3fold.txt new file mode 100644 index 000000000000..38e4dac810b6 --- /dev/null +++ b/Documentation/vm/z3fold.txt @@ -0,0 +1,26 @@ +z3fold +------ + +z3fold is a special purpose allocator for storing compressed pages. +It is designed to store up to three compressed pages per physical page. +It is a zbud derivative which allows for higher compression +ratio keeping the simplicity and determinism of its predecessor. + +The main differences between z3fold and zbud are: +* unlike zbud, z3fold allows for up to PAGE_SIZE allocations +* z3fold can hold up to 3 compressed pages in its page +* z3fold doesn't export any API itself and is thus intended to be used + via the zpool API. + +To keep the determinism and simplicity, z3fold, just like zbud, always +stores an integral number of compressed pages per page, but it can store +up to 3 pages unlike zbud which can store at most 2. Therefore the +compression ratio goes to around 2.7x while zbud's one is around 1.7x. + +Unlike zbud (but like zsmalloc for that matter) z3fold_alloc() does not +return a dereferenceable pointer. Instead, it returns an unsigned long +handle which encodes actual location of the allocated object. + +Keeping effective compression ratio close to zsmalloc's, z3fold doesn't +depend on MMU enabled and provides more predictable reclaim behavior +which makes it a better fit for small and response-critical systems. diff --git a/Documentation/w1/slaves/w1_therm b/Documentation/w1/slaves/w1_therm index 13411fe52f7f..d1f93af36f38 100644 --- a/Documentation/w1/slaves/w1_therm +++ b/Documentation/w1/slaves/w1_therm @@ -33,7 +33,15 @@ temperature conversion at a time. If none of the devices are parasite powered it would be possible to convert all the devices at the same time and then go back to read individual sensors. That isn't currently supported. The driver also doesn't support reduced -precision (which would also reduce the conversion time). +precision (which would also reduce the conversion time) when reading values. + +Writing a value between 9 and 12 to the sysfs w1_slave file will change the +precision of the sensor for the next readings. This value is in (volatile) +SRAM, so it is reset when the sensor gets power-cycled. + +To store the current precision configuration into EEPROM, the value 0 +has to be written to the sysfs w1_slave file. Since the EEPROM has a limited +amount of writes (>50k), this command should be used wisely. The module parameter strong_pullup can be set to 0 to disable the strong pullup, 1 to enable autodetection or 2 to force strong pullup. diff --git a/Documentation/watchdog/hpwdt.txt b/Documentation/watchdog/hpwdt.txt index 9488078900e0..a40398cce9d1 100644 --- a/Documentation/watchdog/hpwdt.txt +++ b/Documentation/watchdog/hpwdt.txt @@ -1,64 +1,67 @@ -Last reviewed: 06/02/2009 +Last reviewed: 04/04/2016 - HP iLO2 NMI Watchdog Driver - NMI sourcing for iLO2 based ProLiant Servers + HPE iLO NMI Watchdog Driver + NMI sourcing for iLO based ProLiant Servers Documentation and Driver by - Thomas Mingarelli <thomas.mingarelli@hp.com> + Thomas Mingarelli <thomas.mingarelli@hpe.com> - The HP iLO2 NMI Watchdog driver is a kernel module that provides basic + The HPE iLO NMI Watchdog driver is a kernel module that provides basic watchdog functionality and the added benefit of NMI sourcing. Both the watchdog functionality and the NMI sourcing capability need to be enabled by the user. Remember that the two modes are not dependent on one another. A user can have the NMI sourcing without the watchdog timer and vice-versa. + All references to iLO in this document imply it also works on iLO2 and all + subsequent generations. Watchdog functionality is enabled like any other common watchdog driver. That is, an application needs to be started that kicks off the watchdog timer. A basic application exists in the Documentation/watchdog/src directory called watchdog-test.c. Simply compile the C file and kick it off. If the system - gets into a bad state and hangs, the HP ProLiant iLO 2 timer register will + gets into a bad state and hangs, the HPE ProLiant iLO timer register will not be updated in a timely fashion and a hardware system reset (also known as an Automatic Server Recovery (ASR)) event will occur. - The hpwdt driver also has four (4) module parameters. They are the following: + The hpwdt driver also has three (3) module parameters. They are the following: - soft_margin - allows the user to set the watchdog timer value - allow_kdump - allows the user to save off a kernel dump image after an NMI + soft_margin - allows the user to set the watchdog timer value. + Default value is 30 seconds. + allow_kdump - allows the user to save off a kernel dump image after an NMI. + Default value is 1/ON nowayout - basic watchdog parameter that does not allow the timer to be restarted or an impending ASR to be escaped. - priority - determines whether or not the hpwdt driver is first on the - die_notify list to handle NMIs or last. The default value - for this module parameter is 0 or LAST. If the user wants to - enable NMI sourcing then reload the hpwdt driver with - priority=1 (and boot with nmi_watchdog=0). + Default value is set when compiling the kernel. If it is set + to "Y", then there is no way of disabling the watchdog once + it has been started. NOTE: More information about watchdog drivers in general, including the ioctl interface to /dev/watchdog can be found in Documentation/watchdog/watchdog-api.txt and Documentation/IPMI.txt. - The priority parameter was introduced due to other kernel software that relied - on handling NMIs (like oprofile). Keeping hpwdt's priority at 0 (or LAST) - enables the users of NMIs for non critical events to be work as expected. - The NMI sourcing capability is disabled by default due to the inability to distinguish between "NMI Watchdog Ticks" and "HW generated NMI events" in the Linux kernel. What this means is that the hpwdt nmi handler code is called each time the NMI signal fires off. This could amount to several thousands of NMIs in a matter of seconds. If a user sees the Linux kernel's "dazed and confused" message in the logs or if the system gets into a hung state, then - the hpwdt driver can be reloaded with the "priority" module parameter set - (priority=1). + the hpwdt driver can be reloaded. 1. If the kernel has not been booted with nmi_watchdog turned off then - edit /boot/grub/menu.lst and place the nmi_watchdog=0 at the end of the - currently booting kernel line. + edit and place the nmi_watchdog=0 at the end of the currently booting + kernel line. Depending on your Linux distribution and platform setup: + For non-UEFI systems + /boot/grub/grub.conf or + /boot/grub/menu.lst + For UEFI systems + /boot/efi/EFI/distroname/grub.conf or + /boot/efi/efi/distroname/elilo.conf 2. reboot the sever - 3. Once the system comes up perform a rmmod hpwdt - 4. insmod /lib/modules/`uname -r`/kernel/drivers/char/watchdog/hpwdt.ko priority=1 + 3. Once the system comes up perform a modprobe -r hpwdt + 4. modprobe /lib/modules/`uname -r`/kernel/drivers/watchdog/hpwdt.ko Now, the hpwdt can successfully receive and source the NMI and provide a log - message that details the reason for the NMI (as determined by the HP BIOS). + message that details the reason for the NMI (as determined by the HPE BIOS). - Below is a list of NMIs the HP BIOS understands along with the associated + Below is a list of NMIs the HPE BIOS understands along with the associated code (reason): No source found 00h @@ -92,4 +95,4 @@ Last reviewed: 06/02/2009 -- Tom Mingarelli - (thomas.mingarelli@hp.com) + (thomas.mingarelli@hpe.com) diff --git a/Documentation/watchdog/watchdog-parameters.txt b/Documentation/watchdog/watchdog-parameters.txt index c161399a6b5c..a8d364227a77 100644 --- a/Documentation/watchdog/watchdog-parameters.txt +++ b/Documentation/watchdog/watchdog-parameters.txt @@ -86,6 +86,10 @@ nowayout: Watchdog cannot be stopped once started davinci_wdt: heartbeat: Watchdog heartbeat period in seconds from 1 to 600, default 60 ------------------------------------------------- +ebc-c384_wdt: +timeout: Watchdog timeout in seconds. (1<=timeout<=15300, default=60) +nowayout: Watchdog cannot be stopped once started +------------------------------------------------- ep93xx_wdt: nowayout: Watchdog cannot be stopped once started timeout: Watchdog timeout in seconds. (1<=timeout<=3600, default=TBD) diff --git a/Documentation/x86/intel_mpx.txt b/Documentation/x86/intel_mpx.txt index 818518a3ff01..1a5a12184a35 100644 --- a/Documentation/x86/intel_mpx.txt +++ b/Documentation/x86/intel_mpx.txt @@ -136,7 +136,7 @@ A: MPX-enabled application will possibly create a lot of bounds tables in If we were to preallocate them for the 128TB of user virtual address space, we would need to reserve 512TB+2GB, which is larger than the entire virtual address space today. This means they can not be reserved - ahead of time. Also, a single process's pre-popualated bounds directory + ahead of time. Also, a single process's pre-populated bounds directory consumes 2GB of virtual *AND* physical memory. IOW, it's completely infeasible to prepopulate bounds directories. @@ -151,7 +151,7 @@ A: This would work if we could hook the site of each and every memory these calls. Q: Could a bounds fault be handed to userspace and the tables allocated - there in a signal handler intead of in the kernel? + there in a signal handler instead of in the kernel? A: mmap() is not on the list of safe async handler functions and even if mmap() would work it still requires locking or nasty tricks to keep track of the allocation state there. diff --git a/Documentation/x86/pat.txt b/Documentation/x86/pat.txt index 54944c71b819..2a4ee6302122 100644 --- a/Documentation/x86/pat.txt +++ b/Documentation/x86/pat.txt @@ -196,3 +196,35 @@ Another, more verbose way of getting PAT related debug messages is with "debugpat" boot parameter. With this parameter, various debug messages are printed to dmesg log. +PAT Initialization +------------------ + +The following table describes how PAT is initialized under various +configurations. The PAT MSR must be updated by Linux in order to support WC +and WT attributes. Otherwise, the PAT MSR has the value programmed in it +by the firmware. Note, Xen enables WC attribute in the PAT MSR for guests. + + MTRR PAT Call Sequence PAT State PAT MSR + ========================================================= + E E MTRR -> PAT init Enabled OS + E D MTRR -> PAT init Disabled - + D E MTRR -> PAT disable Disabled BIOS + D D MTRR -> PAT disable Disabled - + - np/E PAT -> PAT disable Disabled BIOS + - np/D PAT -> PAT disable Disabled - + E !P/E MTRR -> PAT init Disabled BIOS + D !P/E MTRR -> PAT disable Disabled BIOS + !M !P/E MTRR stub -> PAT disable Disabled BIOS + + Legend + ------------------------------------------------ + E Feature enabled in CPU + D Feature disabled/unsupported in CPU + np "nopat" boot option specified + !P CONFIG_X86_PAT option unset + !M CONFIG_MTRR option unset + Enabled PAT state set to enabled + Disabled PAT state set to disabled + OS PAT initializes PAT MSR with OS setting + BIOS PAT keeps PAT MSR with BIOS setting + diff --git a/Documentation/xillybus.txt b/Documentation/xillybus.txt index 81d111b4dc28..1660145b9969 100644 --- a/Documentation/xillybus.txt +++ b/Documentation/xillybus.txt @@ -215,7 +215,7 @@ in xillybus_core.c as follows: choice is a non-zero value, to match standard UNIX behavior. * synchronous: A non-zero value means that the pipe is synchronous. See - Syncronization above. + Synchronization above. * bufsize: Each DMA buffer's size. Always a power of two. diff --git a/Documentation/zh_CN/HOWTO b/Documentation/zh_CN/HOWTO index 54ea24ff63c7..f0613b92e0be 100644 --- a/Documentation/zh_CN/HOWTO +++ b/Documentation/zh_CN/HOWTO @@ -207,7 +207,7 @@ kernel.org网站的pub/linux/kernel/v2.6/目录下找到它。它的开发遵循 - 每当一个新版本的内核被发布，为期两周的集成窗口将被打开。在这段时间里 维护者可以向Linus提交大段的修改，通常这些修改已经被放到-mm内核中几个 星期了。提交大量修改的首选方式是使用git工具（内核的代码版本管理工具 - ，更多的信息可以在http://git.or.cz/获取），不过使用普通补丁也是可以 + ，更多的信息可以在http://git-scm.com/获取），不过使用普通补丁也是可以 的。 - 两个星期以后-rc1版本内核发布。之后只有不包含可能影响整个内核稳定性的 新功能的补丁才可能被接受。请注意一个全新的驱动程序（或者文件系统）有 @@ -218,8 +218,6 @@ kernel.org网站的pub/linux/kernel/v2.6/目录下找到它。它的开发遵循 时，一个新的-rc版本就会被发布。计划是每周都发布新的-rc版本。 - 这个过程一直持续下去直到内核被认为达到足够稳定的状态，持续时间大概是 6个星期。 - - 以下地址跟踪了在每个-rc发布中发现的退步列表： - http://kernelnewbies.org/known_regressions 关于内核发布，值得一提的是Andrew Morton在linux-kernel邮件列表中如是说： “没有人知道新内核何时会被发布，因为发布是根据已知bug的情况来决定 diff --git a/Documentation/zh_CN/arm64/booting.txt b/Documentation/zh_CN/arm64/booting.txt index 1145bf864082..c1dd968c5ee9 100644 --- a/Documentation/zh_CN/arm64/booting.txt +++ b/Documentation/zh_CN/arm64/booting.txt @@ -8,7 +8,7 @@ or if there is a problem with the translation. M: Will Deacon <will.deacon@arm.com> zh_CN: Fu Wei <wefu@redhat.com> -C: 1926e54f115725a9248d0c4c65c22acaf94de4c4 +C: 55f058e7574c3615dea4615573a19bdb258696c6 --------------------------------------------------------------------- Documentation/arm64/booting.txt 的中文翻译 @@ -20,7 +20,7 @@ Documentation/arm64/booting.txt 的中文翻译 中文版维护者： 傅炜 Fu Wei <wefu@redhat.com> 中文版翻译者： 傅炜 Fu Wei <wefu@redhat.com> 中文版校译者： 傅炜 Fu Wei <wefu@redhat.com> -本文翻译提交时的 Git 检出点为： 1926e54f115725a9248d0c4c65c22acaf94de4c4 +本文翻译提交时的 Git 检出点为： 55f058e7574c3615dea4615573a19bdb258696c6 以下为正文 --------------------------------------------------------------------- @@ -125,18 +125,22 @@ AArch64 内核当前没有提供自解压代码，因此如果使用了压缩内 1 - 4K 2 - 16K 3 - 64K - 位 3-63: 保留。 + 位 3: 内核物理位置 + 0 - 2MB 对齐基址应尽量靠近内存起始处，因为 + 其基址以下的内存无法通过线性映射访问 + 1 - 2MB 对齐基址可以在物理内存的任意位置 + 位 4-63: 保留。 - 当 image_size 为零时，引导装载程序应试图在内核映像末尾之后尽可能 多地保留空闲内存供内核直接使用。对内存空间的需求量因所选定的内核 特性而异, 并无实际限制。 -内核映像必须被放置在靠近可用系统内存起始的 2MB 对齐为基址的 -text_offset 字节处，并从该处被调用。当前，对 Linux 来说在此基址以下的 -内存是无法使用的，因此强烈建议将系统内存的起始作为这个基址。2MB 对齐 -基址和内核映像起始地址之间的区域对于内核来说没有特殊意义，且可能被 -用于其他目的。 +内核映像必须被放置在任意一个可用系统内存 2MB 对齐基址的 text_offset +字节处，并从该处被调用。2MB 对齐基址和内核映像起始地址之间的区域对于 +内核来说没有特殊意义，且可能被用于其他目的。 从映像起始地址算起，最少必须准备 image_size 字节的空闲内存供内核使用。 +注： v4.6 之前的版本无法使用内核映像物理偏移以下的内存，所以当时建议 +将映像尽量放置在靠近系统内存起始的地方。 任何提供给内核的内存（甚至在映像起始地址之前），若未从内核中标记为保留 (如在设备树（dtb）的 memreserve 区域），都将被认为对内核是可用。 |
