diff options
Diffstat (limited to 'Documentation')
61 files changed, 566 insertions, 372 deletions
diff --git a/Documentation/admin-guide/cgroup-v2.rst b/Documentation/admin-guide/cgroup-v2.rst index 0fa8c0e615c2..5361ebec3361 100644 --- a/Documentation/admin-guide/cgroup-v2.rst +++ b/Documentation/admin-guide/cgroup-v2.rst @@ -615,8 +615,8 @@ on an IO device and is an example of this type. Protections ----------- -A cgroup is protected to be allocated upto the configured amount of -the resource if the usages of all its ancestors are under their +A cgroup is protected upto the configured amount of the resource +as long as the usages of all its ancestors are under their protected levels. Protections can be hard guarantees or best effort soft boundaries. Protections can also be over-committed in which case only upto the amount available to the parent is protected among @@ -1096,7 +1096,10 @@ PAGE_SIZE multiple when read back. is within its effective min boundary, the cgroup's memory won't be reclaimed under any conditions. If there is no unprotected reclaimable memory available, OOM killer - is invoked. + is invoked. Above the effective min boundary (or + effective low boundary if it is higher), pages are reclaimed + proportionally to the overage, reducing reclaim pressure for + smaller overages. Effective min boundary is limited by memory.min values of all ancestor cgroups. If there is memory.min overcommitment @@ -1118,7 +1121,10 @@ PAGE_SIZE multiple when read back. Best-effort memory protection. If the memory usage of a cgroup is within its effective low boundary, the cgroup's memory won't be reclaimed unless memory can be reclaimed - from unprotected cgroups. + from unprotected cgroups. Above the effective low boundary (or + effective min boundary if it is higher), pages are reclaimed + proportionally to the overage, reducing reclaim pressure for + smaller overages. Effective low boundary is limited by memory.low values of all ancestor cgroups. If there is memory.low overcommitment @@ -2482,8 +2488,10 @@ system performance due to overreclaim, to the point where the feature becomes self-defeating. The memory.low boundary on the other hand is a top-down allocated -reserve. A cgroup enjoys reclaim protection when it's within its low, -which makes delegation of subtrees possible. +reserve. A cgroup enjoys reclaim protection when it's within its +effective low, which makes delegation of subtrees possible. It also +enjoys having reclaim pressure proportional to its overage when +above its effective low. The original high boundary, the hard limit, is defined as a strict limit that can not budge, even if the OOM killer has to be called. diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index c7ac2f3ac99f..a84a83f8881e 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -5302,6 +5302,10 @@ the unplug protocol never -- do not unplug even if version check succeeds + xen_legacy_crash [X86,XEN] + Crash from Xen panic notifier, without executing late + panic() code such as dumping handler. + xen_nopvspin [X86,XEN] Disables the ticketlock slowpath using Xen PV optimizations. diff --git a/Documentation/arm64/memory.rst b/Documentation/arm64/memory.rst index b040909e45f8..02e02175e6f5 100644 --- a/Documentation/arm64/memory.rst +++ b/Documentation/arm64/memory.rst @@ -154,11 +154,18 @@ return virtual addresses to userspace from a 48-bit range. Software can "opt-in" to receiving VAs from a 52-bit space by specifying an mmap hint parameter that is larger than 48-bit. + For example: - maybe_high_address = mmap(~0UL, size, prot, flags,...); + +.. code-block:: c + + maybe_high_address = mmap(~0UL, size, prot, flags,...); It is also possible to build a debug kernel that returns addresses from a 52-bit space by enabling the following kernel config options: + +.. code-block:: sh + CONFIG_EXPERT=y && CONFIG_ARM64_FORCE_52BIT=y Note that this option is only intended for debugging applications diff --git a/Documentation/arm64/silicon-errata.rst b/Documentation/arm64/silicon-errata.rst index 17ea3fecddaa..5a09661330fc 100644 --- a/Documentation/arm64/silicon-errata.rst +++ b/Documentation/arm64/silicon-errata.rst @@ -91,6 +91,11 @@ stable kernels. | ARM | MMU-500 | #841119,826419 | N/A | +----------------+-----------------+-----------------+-----------------------------+ +----------------+-----------------+-----------------+-----------------------------+ +| Broadcom | Brahma-B53 | N/A | ARM64_ERRATUM_845719 | ++----------------+-----------------+-----------------+-----------------------------+ +| Broadcom | Brahma-B53 | N/A | ARM64_ERRATUM_843419 | ++----------------+-----------------+-----------------+-----------------------------+ ++----------------+-----------------+-----------------+-----------------------------+ | Cavium | ThunderX ITS | #22375,24313 | CAVIUM_ERRATUM_22375 | +----------------+-----------------+-----------------+-----------------------------+ | Cavium | ThunderX ITS | #23144 | CAVIUM_ERRATUM_23144 | @@ -107,6 +112,8 @@ stable kernels. +----------------+-----------------+-----------------+-----------------------------+ | Cavium | ThunderX2 SMMUv3| #126 | N/A | +----------------+-----------------+-----------------+-----------------------------+ +| Cavium | ThunderX2 Core | #219 | CAVIUM_TX2_ERRATUM_219 | ++----------------+-----------------+-----------------+-----------------------------+ +----------------+-----------------+-----------------+-----------------------------+ | Freescale/NXP | LS2080A/LS1043A | A-008585 | FSL_ERRATUM_A008585 | +----------------+-----------------+-----------------+-----------------------------+ @@ -124,7 +131,7 @@ stable kernels. +----------------+-----------------+-----------------+-----------------------------+ | Qualcomm Tech. | Kryo/Falkor v1 | E1003 | QCOM_FALKOR_ERRATUM_1003 | +----------------+-----------------+-----------------+-----------------------------+ -| Qualcomm Tech. | Falkor v1 | E1009 | QCOM_FALKOR_ERRATUM_1009 | +| Qualcomm Tech. | Kryo/Falkor v1 | E1009 | QCOM_FALKOR_ERRATUM_1009 | +----------------+-----------------+-----------------+-----------------------------+ | Qualcomm Tech. | QDF2400 ITS | E0065 | QCOM_QDF2400_ERRATUM_0065 | +----------------+-----------------+-----------------+-----------------------------+ diff --git a/Documentation/core-api/index.rst b/Documentation/core-api/index.rst index fa16a0538dcb..ab0eae1c153a 100644 --- a/Documentation/core-api/index.rst +++ b/Documentation/core-api/index.rst @@ -38,6 +38,7 @@ Core utilities protection-keys ../RCU/index gcc-plugins + symbol-namespaces Interfaces for kernel debugging diff --git a/Documentation/core-api/memory-allocation.rst b/Documentation/core-api/memory-allocation.rst index 7744aa3bf2e0..939e3dfc86e9 100644 --- a/Documentation/core-api/memory-allocation.rst +++ b/Documentation/core-api/memory-allocation.rst @@ -98,6 +98,10 @@ limited. The actual limit depends on the hardware and the kernel configuration, but it is a good practice to use `kmalloc` for objects smaller than page size. +The address of a chunk allocated with `kmalloc` is aligned to at least +ARCH_KMALLOC_MINALIGN bytes. For sizes which are a power of two, the +alignment is also guaranteed to be at least the respective size. + For large allocations you can use :c:func:`vmalloc` and :c:func:`vzalloc`, or directly request pages from the page allocator. The memory allocated by `vmalloc` and related functions is diff --git a/Documentation/kbuild/namespaces.rst b/Documentation/core-api/symbol-namespaces.rst index 982ed7b568ac..982ed7b568ac 100644 --- a/Documentation/kbuild/namespaces.rst +++ b/Documentation/core-api/symbol-namespaces.rst diff --git a/Documentation/dev-tools/kasan.rst b/Documentation/dev-tools/kasan.rst index b72d07d70239..525296121d89 100644 --- a/Documentation/dev-tools/kasan.rst +++ b/Documentation/dev-tools/kasan.rst @@ -41,6 +41,9 @@ smaller binary while the latter is 1.1 - 2 times faster. Both KASAN modes work with both SLUB and SLAB memory allocators. For better bug detection and nicer reporting, enable CONFIG_STACKTRACE. +To augment reports with last allocation and freeing stack of the physical page, +it is recommended to enable also CONFIG_PAGE_OWNER and boot with page_owner=on. + To disable instrumentation for specific files or directories, add a line similar to the following to the respective kernel Makefile: diff --git a/Documentation/dev-tools/kselftest.rst b/Documentation/dev-tools/kselftest.rst index 25604904fa6e..ecdfdc9d4b03 100644 --- a/Documentation/dev-tools/kselftest.rst +++ b/Documentation/dev-tools/kselftest.rst @@ -89,6 +89,22 @@ To build, save output files in a separate directory with KBUILD_OUTPUT :: $ export KBUILD_OUTPUT=/tmp/kselftest; make TARGETS="size timers" kselftest +Additionally you can use the "SKIP_TARGETS" variable on the make command +line to specify one or more targets to exclude from the TARGETS list. + +To run all tests but a single subsystem:: + + $ make -C tools/testing/selftests SKIP_TARGETS=ptrace run_tests + +You can specify multiple tests to skip:: + + $ make SKIP_TARGETS="size timers" kselftest + +You can also specify a restricted list of tests to run together with a +dedicated skiplist:: + + $ make TARGETS="bpf breakpoints size timers" SKIP_TARGETS=bpf kselftest + See the top-level tools/testing/selftests/Makefile for the list of all possible targets. diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index c82c5e57d44c..9c7e70335ac0 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -496,12 +496,12 @@ properties: - description: Theobroma Systems RK3368-uQ7 with Haikou baseboard items: - - const: tsd,rk3368-uq7-haikou + - const: tsd,rk3368-lion-haikou - const: rockchip,rk3368 - description: Theobroma Systems RK3399-Q7 with Haikou baseboard items: - - const: tsd,rk3399-q7-haikou + - const: tsd,rk3399-puma-haikou - const: rockchip,rk3399 - description: Tronsmart Orion R68 Meta diff --git a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml index 47950fced28d..dafc0980c4fa 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml @@ -36,6 +36,9 @@ properties: resets: maxItems: 1 + vcc-dsi-supply: + description: VCC-DSI power supply of the DSI encoder + phys: maxItems: 1 @@ -64,6 +67,7 @@ required: - phys - phy-names - resets + - vcc-dsi-supply - port additionalProperties: false @@ -79,6 +83,7 @@ examples: resets = <&ccu 4>; phys = <&dphy0>; phy-names = "dphy"; + vcc-dsi-supply = <®_dcdc1>; #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/display/arm,malidp.txt b/Documentation/devicetree/bindings/display/arm,malidp.txt index 2f7870983ef1..7a97a2b48c2a 100644 --- a/Documentation/devicetree/bindings/display/arm,malidp.txt +++ b/Documentation/devicetree/bindings/display/arm,malidp.txt @@ -37,6 +37,8 @@ Optional properties: Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt) to be used for the framebuffer; if not present, the framebuffer may be located anywhere in memory. + - arm,malidp-arqos-high-level: integer of u32 value describing the ARQoS + levels of DP500's QoS signaling. Example: @@ -54,6 +56,7 @@ Example: clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>; clock-names = "pxlclk", "mclk", "aclk", "pclk"; arm,malidp-output-port-lines = /bits/ 8 <8 8 8>; + arm,malidp-arqos-high-level = <0xd000d000>; port { dp0_output: endpoint { remote-endpoint = <&tda998x_2_input>; diff --git a/Documentation/devicetree/bindings/display/bridge/anx7814.txt b/Documentation/devicetree/bindings/display/bridge/anx7814.txt index dbd7c84ee584..17258747fff6 100644 --- a/Documentation/devicetree/bindings/display/bridge/anx7814.txt +++ b/Documentation/devicetree/bindings/display/bridge/anx7814.txt @@ -6,7 +6,11 @@ designed for portable devices. Required properties: - - compatible : "analogix,anx7814" + - compatible : Must be one of: + "analogix,anx7808" + "analogix,anx7812" + "analogix,anx7814" + "analogix,anx7818" - reg : I2C address of the device - interrupts : Should contain the INTP interrupt - hpd-gpios : Which GPIO to use for hpd diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt index db680413e89c..819f3e31013c 100644 --- a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt @@ -13,6 +13,7 @@ Required properties: - compatible : Shall contain one or more of - "renesas,r8a774a1-hdmi" for R8A774A1 (RZ/G2M) compatible HDMI TX + - "renesas,r8a774b1-hdmi" for R8A774B1 (RZ/G2N) compatible HDMI TX - "renesas,r8a7795-hdmi" for R8A7795 (R-Car H3) compatible HDMI TX - "renesas,r8a7796-hdmi" for R8A7796 (R-Car M3-W) compatible HDMI TX - "renesas,r8a77965-hdmi" for R8A77965 (R-Car M3-N) compatible HDMI TX diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt index c6a196d0b075..c62ce2494ed9 100644 --- a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt +++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt @@ -10,6 +10,7 @@ Required properties: - "renesas,r8a7743-lvds" for R8A7743 (RZ/G1M) compatible LVDS encoders - "renesas,r8a7744-lvds" for R8A7744 (RZ/G1N) compatible LVDS encoders - "renesas,r8a774a1-lvds" for R8A774A1 (RZ/G2M) compatible LVDS encoders + - "renesas,r8a774b1-lvds" for R8A774B1 (RZ/G2N) compatible LVDS encoders - "renesas,r8a774c0-lvds" for R8A774C0 (RZ/G2E) compatible LVDS encoders - "renesas,r8a7790-lvds" for R8A7790 (R-Car H2) compatible LVDS encoders - "renesas,r8a7791-lvds" for R8A7791 (R-Car M2-W) compatible LVDS encoders diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt index 8469de510001..b91e709db7a4 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt @@ -27,19 +27,22 @@ Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt. Required properties (all function blocks): - compatible: "mediatek,<chip>-disp-<function>", one of - "mediatek,<chip>-disp-ovl" - overlay (4 layers, blending, csc) - "mediatek,<chip>-disp-rdma" - read DMA / line buffer - "mediatek,<chip>-disp-wdma" - write DMA - "mediatek,<chip>-disp-color" - color processor - "mediatek,<chip>-disp-aal" - adaptive ambient light controller - "mediatek,<chip>-disp-gamma" - gamma correction - "mediatek,<chip>-disp-merge" - merge streams from two RDMA sources - "mediatek,<chip>-disp-split" - split stream to two encoders - "mediatek,<chip>-disp-ufoe" - data compression engine - "mediatek,<chip>-dsi" - DSI controller, see mediatek,dsi.txt - "mediatek,<chip>-dpi" - DPI controller, see mediatek,dpi.txt - "mediatek,<chip>-disp-mutex" - display mutex - "mediatek,<chip>-disp-od" - overdrive + "mediatek,<chip>-disp-ovl" - overlay (4 layers, blending, csc) + "mediatek,<chip>-disp-ovl-2l" - overlay (2 layers, blending, csc) + "mediatek,<chip>-disp-rdma" - read DMA / line buffer + "mediatek,<chip>-disp-wdma" - write DMA + "mediatek,<chip>-disp-ccorr" - color correction + "mediatek,<chip>-disp-color" - color processor + "mediatek,<chip>-disp-dither" - dither + "mediatek,<chip>-disp-aal" - adaptive ambient light controller + "mediatek,<chip>-disp-gamma" - gamma correction + "mediatek,<chip>-disp-merge" - merge streams from two RDMA sources + "mediatek,<chip>-disp-split" - split stream to two encoders + "mediatek,<chip>-disp-ufoe" - data compression engine + "mediatek,<chip>-dsi" - DSI controller, see mediatek,dsi.txt + "mediatek,<chip>-dpi" - DPI controller, see mediatek,dpi.txt + "mediatek,<chip>-disp-mutex" - display mutex + "mediatek,<chip>-disp-od" - overdrive the supported chips are mt2701, mt2712 and mt8173. - reg: Physical base address and length of the function block register space - interrupts: The interrupt signal from the function block (required, except for @@ -49,6 +52,7 @@ Required properties (all function blocks): For most function blocks this is just a single clock input. Only the DSI and DPI controller nodes have multiple clock inputs. These are documented in mediatek,dsi.txt and mediatek,dpi.txt, respectively. + An exception is that the mt8183 mutex is always free running with no clocks property. Required properties (DMA function blocks): - compatible: Should be one of diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt index fadf327c7cdf..a19a6cc375ed 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt @@ -7,7 +7,7 @@ channel output. Required properties: - compatible: "mediatek,<chip>-dsi" - the supported chips are mt2701 and mt8173. + the supported chips are mt2701, mt8173 and mt8183. - reg: Physical base address and length of the controller's registers - interrupts: The interrupt signal from the function block. - clocks: device clocks @@ -26,7 +26,7 @@ The MIPI TX configuration module controls the MIPI D-PHY. Required properties: - compatible: "mediatek,<chip>-mipi-tx" - the supported chips are mt2701 and mt8173. + the supported chips are mt2701, mt8173 and mt8183. - reg: Physical base address and length of the controller's registers - clocks: PLL reference clock - clock-output-names: name of the output clock line to the DSI encoder diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt b/Documentation/devicetree/bindings/display/renesas,du.txt index c97dfacad281..17cb2771364b 100644 --- a/Documentation/devicetree/bindings/display/renesas,du.txt +++ b/Documentation/devicetree/bindings/display/renesas,du.txt @@ -8,6 +8,7 @@ Required Properties: - "renesas,du-r8a7745" for R8A7745 (RZ/G1E) compatible DU - "renesas,du-r8a77470" for R8A77470 (RZ/G1C) compatible DU - "renesas,du-r8a774a1" for R8A774A1 (RZ/G2M) compatible DU + - "renesas,du-r8a774b1" for R8A774B1 (RZ/G2N) compatible DU - "renesas,du-r8a774c0" for R8A774C0 (RZ/G2E) compatible DU - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU @@ -60,6 +61,7 @@ corresponding to each DU output. R8A7745 (RZ/G1E) DPAD 0 DPAD 1 - - R8A77470 (RZ/G1C) DPAD 0 DPAD 1 LVDS 0 - R8A774A1 (RZ/G2M) DPAD 0 HDMI 0 LVDS 0 - + R8A774B1 (RZ/G2N) DPAD 0 HDMI 0 LVDS 0 - R8A774C0 (RZ/G2E) DPAD 0 LVDS 0 LVDS 1 - R8A7779 (R-Car H1) DPAD 0 DPAD 1 - - R8A7790 (R-Car H2) DPAD 0 LVDS 0 LVDS 1 - diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt index 4f58c5a2d195..8b3a5f514205 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt @@ -20,6 +20,10 @@ Required properties: "rockchip,rk3228-vop"; "rockchip,rk3328-vop"; +- reg: Must contain one entry corresponding to the base address and length + of the register space. Can optionally contain a second entry + corresponding to the CRTC gamma LUT address. + - interrupts: should contain a list of all VOP IP block interrupts in the order: VSYNC, LCD_SYSTEM. The interrupt specifier format depends on the interrupt controller used. @@ -48,7 +52,7 @@ Example: SoC specific DT entry: vopb: vopb@ff930000 { compatible = "rockchip,rk3288-vop"; - reg = <0xff930000 0x19c>; + reg = <0x0 0xff930000 0x0 0x19c>, <0x0 0xff931000 0x0 0x1000>; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>; clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; diff --git a/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt b/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt index f4c5d34c4111..7079d44bf3ba 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt @@ -1,8 +1,11 @@ * Advanced Interrupt Controller (AIC) Required properties: -- compatible: Should be "atmel,<chip>-aic" - <chip> can be "at91rm9200", "sama5d2", "sama5d3" or "sama5d4" +- compatible: Should be: + - "atmel,<chip>-aic" where <chip> can be "at91rm9200", "sama5d2", + "sama5d3" or "sama5d4" + - "microchip,<chip>-aic" where <chip> can be "sam9x60" + - interrupt-controller: Identifies the node as an interrupt controller. - #interrupt-cells: The number of cells to define the interrupts. It should be 3. The first cell is the IRQ number (aka "Peripheral IDentifier" on datasheet). diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml index 27f38eed389e..d3e423fcb6c2 100644 --- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml +++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/arm/allwinner,sun4i-a10-csi.yaml# +$id: http://devicetree.org/schemas/media/allwinner,sun4i-a10-csi.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Allwinner A10 CMOS Sensor Interface (CSI) Device Tree Bindings @@ -27,14 +27,12 @@ properties: clocks: items: - description: The CSI interface clock - - description: The CSI module clock - description: The CSI ISP clock - description: The CSI DRAM clock clock-names: items: - const: bus - - const: mod - const: isp - const: ram @@ -89,9 +87,8 @@ examples: compatible = "allwinner,sun7i-a20-csi0"; reg = <0x01c09000 0x1000>; interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI0>, - <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>; - clock-names = "bus", "mod", "isp", "ram"; + clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>; + clock-names = "bus", "isp", "ram"; resets = <&ccu RST_CSI0>; port { diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml index f83d888176cc..064b7dfc4252 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml @@ -33,13 +33,13 @@ patternProperties: allOf: - $ref: "/schemas/types.yaml#/definitions/string" - enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, - ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, ESPI, - ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, - GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, - GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12, - I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, - I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, LPC, - LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, + ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, + ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0, + GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, + GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, I2C1, I2C10, I2C11, + I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, I2C6, + I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, + LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, @@ -48,47 +48,45 @@ patternProperties: PWM8, PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14, SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, - SALT6, SALT7, SALT8, SALT9, SD1, SD2, SD3, SD3DAT4, SD3DAT5, - SD3DAT6, SD3DAT7, SGPM1, SGPS1, SIOONCTRL, SIOPBI, SIOPBO, - SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, - SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, - TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, - TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, - TXD2, TXD3, TXD4, UART10, UART11, UART12, UART13, UART6, UART7, - UART8, UART9, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, - WDTRST4, ] + SALT6, SALT7, SALT8, SALT9, SD1, SD2, SGPM1, SGPS1, SIOONCTRL, + SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, + SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, + TACH10, TACH11, TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, + TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, + THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12, UART13, + UART6, UART7, UART8, UART9, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, + WDTRST3, WDTRST4, ] groups: allOf: - $ref: "/schemas/types.yaml#/definitions/string" - enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, - ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, ESPI, - ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWQSPID, FWSPIWP, GPIT0, - GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, - GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, - I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, - I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, - JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, - MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, - MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, - NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, - NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, - PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0, PWM12G1, - PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2, PWM3, - PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1, - QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, - RMII4, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1, - SALT11G0, SALT11G1, SALT12G0, SALT12G1, SALT13G0, SALT13G1, - SALT14G0, SALT14G1, SALT15G0, SALT15G1, SALT16G0, SALT16G1, - SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9G0, - SALT9G1, SD1, SD2, SD3, SD3DAT4, SD3DAT5, SD3DAT6, SD3DAT7, - SGPM1, SGPS1, SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, - SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2, - SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13, - TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, - TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, - UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6, - UART7, UART8, UART9, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, - WDTRST4, ] + ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, + EMMCG4, EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, + FWQSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, + GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, + GPIU7, HVI3C3, HVI3C4, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, + I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, + I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, + LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3, MACLINK4, + MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, + NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, + NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, + OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, + PWM12G0, PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, + PWM15G1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, + PWM9G0, PWM9G1, QSPI1, QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, + RMII1, RMII2, RMII3, RMII4, RXD1, RXD2, RXD3, RXD4, SALT1, + SALT10G0, SALT10G1, SALT11G0, SALT11G1, SALT12G0, SALT12G1, + SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0, SALT15G1, + SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, + SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPS1, SIOONCTRL, + SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, + SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, + TACH10, TACH11, TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, + TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, + THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12G0, + UART12G1, UART13G0, UART13G1, UART6, UART7, UART8, UART9, VB, + VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4, ] required: - compatible diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml index a78150c47aa2..f32416968197 100644 --- a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml @@ -30,8 +30,8 @@ if: properties: compatible: enum: - - const: regulator-fixed - - const: regulator-fixed-clock + - regulator-fixed + - regulator-fixed-clock regulator-name: true diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml index b261a3015f84..04819ad379c2 100644 --- a/Documentation/devicetree/bindings/riscv/cpus.yaml +++ b/Documentation/devicetree/bindings/riscv/cpus.yaml @@ -24,15 +24,17 @@ description: | properties: compatible: - items: - - enum: - - sifive,rocket0 - - sifive,e5 - - sifive,e51 - - sifive,u54-mc - - sifive,u54 - - sifive,u5 - - const: riscv + oneOf: + - items: + - enum: + - sifive,rocket0 + - sifive,e5 + - sifive,e51 + - sifive,u54-mc + - sifive,u54 + - sifive,u5 + - const: riscv + - const: riscv # Simulator only description: Identifies that the hart uses the RISC-V instruction set and identifies the type of the hart. @@ -66,12 +68,8 @@ properties: insensitive, letters in the riscv,isa string must be all lowercase to simplify parsing. - timebase-frequency: - type: integer - minimum: 1 - description: - Specifies the clock frequency of the system timer in Hz. - This value is common to all harts on a single system image. + # RISC-V requires 'timebase-frequency' in /cpus, so disallow it here + timebase-frequency: false interrupt-controller: type: object @@ -93,7 +91,6 @@ properties: required: - riscv,isa - - timebase-frequency - interrupt-controller examples: diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt index dd63151dc8b6..b143d9a21b2d 100644 --- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt +++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt @@ -26,6 +26,8 @@ Required properties: - "renesas,hscif-r8a77470" for R8A77470 (RZ/G1C) HSCIF compatible UART. - "renesas,scif-r8a774a1" for R8A774A1 (RZ/G2M) SCIF compatible UART. - "renesas,hscif-r8a774a1" for R8A774A1 (RZ/G2M) HSCIF compatible UART. + - "renesas,scif-r8a774b1" for R8A774B1 (RZ/G2N) SCIF compatible UART. + - "renesas,hscif-r8a774b1" for R8A774B1 (RZ/G2N) HSCIF compatible UART. - "renesas,scif-r8a774c0" for R8A774C0 (RZ/G2E) SCIF compatible UART. - "renesas,hscif-r8a774c0" for R8A774C0 (RZ/G2E) HSCIF compatible UART. - "renesas,scif-r8a7778" for R8A7778 (R-Car M1) SCIF compatible UART. diff --git a/Documentation/devicetree/bindings/usb/amlogic,dwc3.txt b/Documentation/devicetree/bindings/usb/amlogic,dwc3.txt index b9f04e617eb7..6ffb09be7a76 100644 --- a/Documentation/devicetree/bindings/usb/amlogic,dwc3.txt +++ b/Documentation/devicetree/bindings/usb/amlogic,dwc3.txt @@ -85,8 +85,8 @@ A child node must exist to represent the core DWC2 IP block. The name of the node is not important. The content of the node is defined in dwc2.txt. PHY documentation is provided in the following places: -- Documentation/devicetree/bindings/phy/meson-g12a-usb2-phy.txt -- Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt +- Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml +- Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml Example device nodes: usb: usb@ffe09000 { diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml index 059f6ef1ad4a..1ca64c85191a 100644 --- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml @@ -63,7 +63,11 @@ properties: description: Set this flag to force EHCI reset after resume. - phys: true + phys: + description: PHY specifier for the USB PHY + + phy-names: + const: usb required: - compatible @@ -89,6 +93,7 @@ examples: interrupts = <39>; clocks = <&ahb_gates 1>; phys = <&usbphy 1>; + phy-names = "usb"; }; ... diff --git a/Documentation/devicetree/bindings/usb/generic-ohci.yaml b/Documentation/devicetree/bindings/usb/generic-ohci.yaml index da5a14becbe5..bcffec1f1341 100644 --- a/Documentation/devicetree/bindings/usb/generic-ohci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ohci.yaml @@ -67,7 +67,11 @@ properties: description: Overrides the detected port count - phys: true + phys: + description: PHY specifier for the USB PHY + + phy-names: + const: usb required: - compatible @@ -84,6 +88,7 @@ examples: interrupts = <64>; clocks = <&usb_clk 6>, <&ahb_gates 2>; phys = <&usbphy 1>; + phy-names = "usb"; }; ... diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt index f3e4acecabe8..42d8814f903a 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt +++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt @@ -33,7 +33,7 @@ Required properties: "dma_ck": dma_bus clock for data transfer by DMA, "xhci_ck": controller clock - - phys : see usb-hcd.txt in the current directory + - phys : see usb-hcd.yaml in the current directory Optional properties: - wakeup-source : enable USB remote wakeup; @@ -53,7 +53,7 @@ Optional properties: See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt - imod-interval-ns: default interrupt moderation interval is 5000ns -additionally the properties from usb-hcd.txt (in the current directory) are +additionally the properties from usb-hcd.yaml (in the current directory) are supported. Example: diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt index b9af7f5ee91d..e0ae6096f7ac 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt +++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt @@ -17,7 +17,7 @@ Required properties: - clock-names : must contain "sys_ck" for clock of controller, the following clocks are optional: "ref_ck", "mcu_ck" and "dma_ck"; - - phys : see usb-hcd.txt in the current directory + - phys : see usb-hcd.yaml in the current directory - dr_mode : should be one of "host", "peripheral" or "otg", refer to usb/generic.txt @@ -60,7 +60,7 @@ Optional properties: - mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0, bit1 for u3port1, ... etc; -additionally the properties from usb-hcd.txt (in the current directory) are +additionally the properties from usb-hcd.yaml (in the current directory) are supported. Sub-nodes: diff --git a/Documentation/devicetree/bindings/usb/usb-hcd.yaml b/Documentation/devicetree/bindings/usb/usb-hcd.yaml index 9c8c56d3a792..7263b7f2b510 100644 --- a/Documentation/devicetree/bindings/usb/usb-hcd.yaml +++ b/Documentation/devicetree/bindings/usb/usb-hcd.yaml @@ -18,8 +18,13 @@ properties: description: List of all the USB PHYs on this HCD + phy-names: + description: + Name specifier for the USB PHY + examples: - | usb { phys = <&usb2_phy1>, <&usb3_phy1>; + phy-names = "usb"; }; diff --git a/Documentation/devicetree/bindings/usb/usb-uhci.txt b/Documentation/devicetree/bindings/usb/usb-uhci.txt index cc2e6f7d602e..d1702eb2c8bd 100644 --- a/Documentation/devicetree/bindings/usb/usb-uhci.txt +++ b/Documentation/devicetree/bindings/usb/usb-uhci.txt @@ -6,7 +6,7 @@ Required properties: - reg : Should contain 1 register ranges(address and length) - interrupts : UHCI controller interrupt -additionally the properties from usb-hcd.txt (in the current directory) are +additionally the properties from usb-hcd.yaml (in the current directory) are supported. Example: diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt index 97400e8f8605..b49b819571f9 100644 --- a/Documentation/devicetree/bindings/usb/usb-xhci.txt +++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt @@ -41,9 +41,9 @@ Optional properties: - usb3-lpm-capable: determines if platform is USB3 LPM capable - quirk-broken-port-ped: set if the controller has broken port disable mechanism - imod-interval-ns: default interrupt moderation interval is 5000ns - - phys : see usb-hcd.txt in the current directory + - phys : see usb-hcd.yaml in the current directory -additionally the properties from usb-hcd.txt (in the current directory) are +additionally the properties from usb-hcd.yaml (in the current directory) are supported. diff --git a/Documentation/driver-api/dma-buf.rst b/Documentation/driver-api/dma-buf.rst index b541e97c7ab1..c78db28519f7 100644 --- a/Documentation/driver-api/dma-buf.rst +++ b/Documentation/driver-api/dma-buf.rst @@ -118,13 +118,13 @@ Kernel Functions and Structures Reference Reservation Objects ------------------- -.. kernel-doc:: drivers/dma-buf/reservation.c +.. kernel-doc:: drivers/dma-buf/dma-resv.c :doc: Reservation Object Overview -.. kernel-doc:: drivers/dma-buf/reservation.c +.. kernel-doc:: drivers/dma-buf/dma-resv.c :export: -.. kernel-doc:: include/linux/reservation.h +.. kernel-doc:: include/linux/dma-resv.h :internal: DMA Fences diff --git a/Documentation/gpu/amdgpu.rst b/Documentation/gpu/amdgpu.rst index 5acdd1842ea2..0efede580039 100644 --- a/Documentation/gpu/amdgpu.rst +++ b/Documentation/gpu/amdgpu.rst @@ -79,16 +79,71 @@ AMDGPU XGMI Support .. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c :internal: -AMDGPU RAS debugfs control interface -==================================== +AMDGPU RAS Support +================== + +The AMDGPU RAS interfaces are exposed via sysfs (for informational queries) and +debugfs (for error injection). + +RAS debugfs/sysfs Control and Error Injection Interfaces +-------------------------------------------------------- .. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c :doc: AMDGPU RAS debugfs control interface +RAS Reboot Behavior for Unrecoverable Errors +-------------------------------------------------------- + +.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c + :doc: AMDGPU RAS Reboot Behavior for Unrecoverable Errors + +RAS Error Count sysfs Interface +------------------------------- + +.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c + :doc: AMDGPU RAS sysfs Error Count Interface + +RAS EEPROM debugfs Interface +---------------------------- + +.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c + :doc: AMDGPU RAS debugfs EEPROM table reset interface + +RAS VRAM Bad Pages sysfs Interface +---------------------------------- + +.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c + :doc: AMDGPU RAS sysfs gpu_vram_bad_pages Interface .. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c :internal: +Sample Code +----------- +Sample code for testing error injection can be found here: +https://cgit.freedesktop.org/mesa/drm/tree/tests/amdgpu/ras_tests.c + +This is part of the libdrm amdgpu unit tests which cover several areas of the GPU. +There are four sets of tests: + +RAS Basic Test + +The test verifies the RAS feature enabled status and makes sure the necessary sysfs and debugfs files +are present. + +RAS Query Test + +This test checks the RAS availability and enablement status for each supported IP block as well as +the error counts. + +RAS Inject Test + +This test injects errors for each IP. + +RAS Disable Test + +This test tests disabling of RAS features for each IP block. + GPU Power/Thermal Controls and Monitoring ========================================= @@ -130,11 +185,11 @@ pp_od_clk_voltage .. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c :doc: pp_od_clk_voltage -pp_dpm_sclk pp_dpm_mclk pp_dpm_pcie -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +pp_dpm_* +~~~~~~~~ .. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c - :doc: pp_dpm_sclk pp_dpm_mclk pp_dpm_pcie + :doc: pp_dpm_sclk pp_dpm_mclk pp_dpm_socclk pp_dpm_fclk pp_dpm_dcefclk pp_dpm_pcie pp_power_profile_mode ~~~~~~~~~~~~~~~~~~~~~ diff --git a/Documentation/gpu/drm-kms-helpers.rst b/Documentation/gpu/drm-kms-helpers.rst index 3868008db8a9..9668a7fe2408 100644 --- a/Documentation/gpu/drm-kms-helpers.rst +++ b/Documentation/gpu/drm-kms-helpers.rst @@ -77,9 +77,6 @@ Atomic State Reset and Initialization Atomic State Helper Reference ----------------------------- -.. kernel-doc:: include/drm/drm_atomic_state_helper.h - :internal: - .. kernel-doc:: drivers/gpu/drm/drm_atomic_state_helper.c :export: diff --git a/Documentation/gpu/drm-mm.rst b/Documentation/gpu/drm-mm.rst index b664f054c259..59619296c84b 100644 --- a/Documentation/gpu/drm-mm.rst +++ b/Documentation/gpu/drm-mm.rst @@ -400,16 +400,13 @@ GEM VRAM Helper Functions Reference .. kernel-doc:: drivers/gpu/drm/drm_gem_vram_helper.c :export: -VRAM MM Helper Functions Reference ----------------------------------- +GEM TTM Helper Functions Reference +----------------------------------- -.. kernel-doc:: drivers/gpu/drm/drm_vram_mm_helper.c +.. kernel-doc:: drivers/gpu/drm/drm_gem_ttm_helper.c :doc: overview -.. kernel-doc:: include/drm/drm_vram_mm_helper.h - :internal: - -.. kernel-doc:: drivers/gpu/drm/drm_vram_mm_helper.c +.. kernel-doc:: drivers/gpu/drm/drm_gem_ttm_helper.c :export: VMA Offset Manager diff --git a/Documentation/gpu/i915.rst b/Documentation/gpu/i915.rst index 3415255ad3dc..d0947c5c4ab8 100644 --- a/Documentation/gpu/i915.rst +++ b/Documentation/gpu/i915.rst @@ -246,6 +246,15 @@ Display PLLs .. kernel-doc:: drivers/gpu/drm/i915/display/intel_dpll_mgr.h :internal: +Display State Buffer +-------------------- + +.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dsb.c + :doc: DSB + +.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dsb.c + :internal: + Memory Management and Command Submission ======================================== @@ -358,15 +367,6 @@ Batchbuffer Parsing .. kernel-doc:: drivers/gpu/drm/i915/i915_cmd_parser.c :internal: -Batchbuffer Pools ------------------ - -.. kernel-doc:: drivers/gpu/drm/i915/i915_gem_batch_pool.c - :doc: batch pool - -.. kernel-doc:: drivers/gpu/drm/i915/i915_gem_batch_pool.c - :internal: - User Batchbuffer Execution -------------------------- @@ -415,32 +415,53 @@ Object Tiling IOCTLs .. kernel-doc:: drivers/gpu/drm/i915/gem/i915_gem_tiling.c :doc: buffer object tiling +Microcontrollers +================ + +Starting from gen9, three microcontrollers are available on the HW: the +graphics microcontroller (GuC), the HEVC/H.265 microcontroller (HuC) and the +display microcontroller (DMC). The driver is responsible for loading the +firmwares on the microcontrollers; the GuC and HuC firmwares are transferred +to WOPCM using the DMA engine, while the DMC firmware is written through MMIO. + WOPCM -===== +----- WOPCM Layout ------------- +~~~~~~~~~~~~ .. kernel-doc:: drivers/gpu/drm/i915/intel_wopcm.c :doc: WOPCM Layout GuC -=== +--- -Firmware Layout -------------------- +.. kernel-doc:: drivers/gpu/drm/i915/gt/uc/intel_guc.c + :doc: GuC + +GuC Firmware Layout +~~~~~~~~~~~~~~~~~~~ .. kernel-doc:: drivers/gpu/drm/i915/gt/uc/intel_uc_fw_abi.h :doc: Firmware Layout +GuC Memory Management +~~~~~~~~~~~~~~~~~~~~~ + +.. kernel-doc:: drivers/gpu/drm/i915/gt/uc/intel_guc.c + :doc: GuC Memory Management +.. kernel-doc:: drivers/gpu/drm/i915/gt/uc/intel_guc.c + :functions: intel_guc_allocate_vma + + GuC-specific firmware loader ----------------------------- +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ .. kernel-doc:: drivers/gpu/drm/i915/gt/uc/intel_guc_fw.c :internal: GuC-based command submission ----------------------------- +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ .. kernel-doc:: drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c :doc: GuC-based command submission @@ -448,11 +469,26 @@ GuC-based command submission .. kernel-doc:: drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c :internal: -GuC Address Space ------------------ +HuC +--- +.. kernel-doc:: drivers/gpu/drm/i915/gt/uc/intel_huc.c + :doc: HuC +.. kernel-doc:: drivers/gpu/drm/i915/gt/uc/intel_huc.c + :functions: intel_huc_auth -.. kernel-doc:: drivers/gpu/drm/i915/gt/uc/intel_guc.c - :doc: GuC Address Space +HuC Memory Management +~~~~~~~~~~~~~~~~~~~~~ + +.. kernel-doc:: drivers/gpu/drm/i915/gt/uc/intel_huc.c + :doc: HuC Memory Management + +HuC Firmware Layout +~~~~~~~~~~~~~~~~~~~ +The HuC FW layout is the same as the GuC one, see `GuC Firmware Layout`_ + +DMC +--- +See `CSR firmware support for DMC`_ Tracing ======= @@ -514,9 +550,9 @@ i915 Perf Stream This section covers the stream-semantics-agnostic structures and functions for representing an i915 perf stream FD and associated file operations. -.. kernel-doc:: drivers/gpu/drm/i915/i915_drv.h +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf_types.h :functions: i915_perf_stream -.. kernel-doc:: drivers/gpu/drm/i915/i915_drv.h +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf_types.h :functions: i915_perf_stream_ops .. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c @@ -541,7 +577,7 @@ for representing an i915 perf stream FD and associated file operations. i915 Perf Observation Architecture Stream ----------------------------------------- -.. kernel-doc:: drivers/gpu/drm/i915/i915_drv.h +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf_types.h :functions: i915_oa_ops .. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c diff --git a/Documentation/gpu/mcde.rst b/Documentation/gpu/mcde.rst index c69e977defda..dd43dde379e0 100644 --- a/Documentation/gpu/mcde.rst +++ b/Documentation/gpu/mcde.rst @@ -5,4 +5,4 @@ ======================================================= .. kernel-doc:: drivers/gpu/drm/mcde/mcde_drv.c - :doc: ST-Ericsson MCDE DRM Driver + :doc: ST-Ericsson MCDE Driver diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst index 32787acff0a8..6792fa9b6b6b 100644 --- a/Documentation/gpu/todo.rst +++ b/Documentation/gpu/todo.rst @@ -7,6 +7,22 @@ TODO list This section contains a list of smaller janitorial tasks in the kernel DRM graphics subsystem useful as newbie projects. Or for slow rainy days. +Difficulty +---------- + +To make it easier task are categorized into different levels: + +Starter: Good tasks to get started with the DRM subsystem. + +Intermediate: Tasks which need some experience with working in the DRM +subsystem, or some specific GPU/display graphics knowledge. For debugging issue +it's good to have the relevant hardware (or a virtual driver set up) available +for testing. + +Advanced: Tricky tasks that need fairly good understanding of the DRM subsystem +and graphics topics. Generally need the relevant hardware for development and +testing. + Subsystem-wide refactorings =========================== @@ -20,6 +36,8 @@ implementations), and then remove it. Contact: Daniel Vetter, respective driver maintainers +Level: Intermediate + Convert existing KMS drivers to atomic modesetting -------------------------------------------------- @@ -38,6 +56,8 @@ do by directly using the new atomic helper driver callbacks. Contact: Daniel Vetter, respective driver maintainers +Level: Advanced + Clean up the clipped coordination confusion around planes --------------------------------------------------------- @@ -50,6 +70,8 @@ helpers. Contact: Ville Syrjälä, Daniel Vetter, driver maintainers +Level: Advanced + Convert early atomic drivers to async commit helpers ---------------------------------------------------- @@ -63,6 +85,8 @@ events for atomic commits correctly. But fixing these bugs is good anyway. Contact: Daniel Vetter, respective driver maintainers +Level: Advanced + Fallout from atomic KMS ----------------------- @@ -91,6 +115,8 @@ interfaces to fix these issues: Contact: Daniel Vetter +Level: Intermediate + Get rid of dev->struct_mutex from GEM drivers --------------------------------------------- @@ -114,6 +140,8 @@ fine-grained per-buffer object and per-context lockings scheme. Currently only t Contact: Daniel Vetter, respective driver maintainers +Level: Advanced + Convert instances of dev_info/dev_err/dev_warn to their DRM_DEV_* equivalent ---------------------------------------------------------------------------- @@ -129,6 +157,8 @@ are better. Contact: Sean Paul, Maintainer of the driver you plan to convert +Level: Starter + Convert drivers to use simple modeset suspend/resume ---------------------------------------------------- @@ -139,6 +169,8 @@ of the atomic suspend/resume code in older atomic modeset drivers. Contact: Maintainer of the driver you plan to convert +Level: Intermediate + Convert drivers to use drm_fb_helper_fbdev_setup/teardown() ----------------------------------------------------------- @@ -157,6 +189,8 @@ probably use drm_fb_helper_fbdev_teardown(). Contact: Maintainer of the driver you plan to convert +Level: Intermediate + Clean up mmap forwarding ------------------------ @@ -166,14 +200,16 @@ There's drm_gem_prime_mmap() for this now, but still needs to be rolled out. Contact: Daniel Vetter +Level: Intermediate + Generic fbdev defio support --------------------------- The defio support code in the fbdev core has some very specific requirements, -which means drivers need to have a special framebuffer for fbdev. Which prevents -us from using the generic fbdev emulation code everywhere. The main issue is -that it uses some fields in struct page itself, which breaks shmem gem objects -(and other things). +which means drivers need to have a special framebuffer for fbdev. The main +issue is that it uses some fields in struct page itself, which breaks shmem +gem objects (and other things). To support defio, affected drivers require +the use of a shadow buffer, which may add CPU and memory overhead. Possible solution would be to write our own defio mmap code in the drm fbdev emulation. It would need to fully wrap the existing mmap ops, forwarding @@ -196,6 +232,8 @@ Might be good to also have some igt testcases for this. Contact: Daniel Vetter, Noralf Tronnes +Level: Advanced + idr_init_base() --------------- @@ -206,6 +244,8 @@ efficient. Contact: Daniel Vetter +Level: Starter + struct drm_gem_object_funcs --------------------------- @@ -216,6 +256,8 @@ We also need a 2nd version of the CMA define that doesn't require the vmapping to be present (different hook for prime importing). Plus this needs to be rolled out to all drivers using their own implementations, too. +Level: Intermediate + Use DRM_MODESET_LOCK_ALL_* helpers instead of boilerplate --------------------------------------------------------- @@ -231,6 +273,8 @@ As a reference, take a look at the conversions already completed in drm core. Contact: Sean Paul, respective driver maintainers +Level: Starter + Rename CMA helpers to DMA helpers --------------------------------- @@ -241,6 +285,9 @@ no one knows what that means) since underneath they just use dma_alloc_coherent. Contact: Laurent Pinchart, Daniel Vetter +Level: Intermediate (mostly because it is a huge tasks without good partial +milestones, not technically itself that challenging) + Convert direct mode.vrefresh accesses to use drm_mode_vrefresh() ---------------------------------------------------------------- @@ -259,6 +306,8 @@ drm_display_mode to avoid future use. Contact: Sean Paul +Level: Starter + Remove drm_display_mode.hsync ----------------------------- @@ -269,6 +318,8 @@ it to use drm_mode_hsync() instead. Contact: Sean Paul +Level: Starter + drm_fb_helper tasks ------------------- @@ -284,20 +335,24 @@ drm_fb_helper tasks removed: drm_fb_helper_single_add_all_connectors(), drm_fb_helper_add_one_connector() and drm_fb_helper_remove_one_connector(). -Core refactorings -================= +Level: Intermediate -Clean up the DRM header mess ----------------------------- +connector register/unregister fixes +----------------------------------- -The DRM subsystem originally had only one huge global header, ``drmP.h``. This -is now split up, but many source files still include it. The remaining part of -the cleanup work here is to replace any ``#include <drm/drmP.h>`` by only the -headers needed (and fixing up any missing pre-declarations in the headers). +- For most connectors it's a no-op to call drm_connector_register/unregister + directly from driver code, drm_dev_register/unregister take care of this + already. We can remove all of them. -In the end no .c file should need to include ``drmP.h`` anymore. +- For dp drivers it's a bit more a mess, since we need the connector to be + registered when calling drm_dp_aux_register. Fix this by instead calling + drm_dp_aux_init, and moving the actual registering into a late_register + callback as recommended in the kerneldoc. -Contact: Daniel Vetter +Level: Intermediate + +Core refactorings +================= Make panic handling work ------------------------ @@ -338,6 +393,8 @@ This is a really varied tasks with lots of little bits and pieces: Contact: Daniel Vetter +Level: Advanced + Clean up the debugfs support ---------------------------- @@ -367,6 +424,8 @@ There's a bunch of issues with it: Contact: Daniel Vetter +Level: Intermediate + KMS cleanups ------------ @@ -382,6 +441,8 @@ Some of these date from the very introduction of KMS in 2008 ... end, for which we could add drm_*_cleanup_kfree(). And then there's the (for historical reasons) misnamed drm_primary_helper_destroy() function. +Level: Intermediate + Better Testing ============== @@ -390,6 +451,8 @@ Enable trinity for DRM And fix up the fallout. Should be really interesting ... +Level: Advanced + Make KMS tests in i-g-t generic ------------------------------- @@ -403,6 +466,8 @@ converting things over. For modeset tests we also first need a bit of infrastructure to use dumb buffers for untiled buffers, to be able to run all the non-i915 specific modeset tests. +Level: Advanced + Extend virtual test driver (VKMS) --------------------------------- @@ -412,6 +477,8 @@ fit the available time. Contact: Daniel Vetter +Level: See details + Backlight Refactoring --------------------- @@ -425,6 +492,8 @@ Plan to fix this: Contact: Daniel Vetter +Level: Intermediate + Driver Specific =============== @@ -438,13 +507,6 @@ See drivers/gpu/drm/amd/display/TODO for tasks. Contact: Harry Wentland, Alex Deucher -i915 ----- - -- Our early/late pm callbacks could be removed in favour of using - device_link_add to model the dependency between i915 and snd_had. See - https://dri.freedesktop.org/docs/drm/driver-api/device_link.html - Bootsplash ========== @@ -460,5 +522,36 @@ for fbdev. Contact: Sam Ravnborg +Level: Advanced + Outside DRM =========== + +Convert fbdev drivers to DRM +---------------------------- + +There are plenty of fbdev drivers for older hardware. Some hwardware has +become obsolete, but some still provides good(-enough) framebuffers. The +drivers that are still useful should be converted to DRM and afterwards +removed from fbdev. + +Very simple fbdev drivers can best be converted by starting with a new +DRM driver. Simple KMS helpers and SHMEM should be able to handle any +existing hardware. The new driver's call-back functions are filled from +existing fbdev code. + +More complex fbdev drivers can be refactored step-by-step into a DRM +driver with the help of the DRM fbconv helpers. [1] These helpers provide +the transition layer between the DRM core infrastructure and the fbdev +driver interface. Create a new DRM driver on top of the fbconv helpers, +copy over the fbdev driver, and hook it up to the DRM code. Examples for +several fbdev drivers are available at [1] and a tutorial of this process +available at [2]. The result is a primitive DRM driver that can run X11 +and Weston. + + - [1] https://gitlab.freedesktop.org/tzimmermann/linux/tree/fbconv + - [2] https://gitlab.freedesktop.org/tzimmermann/linux/blob/fbconv/drivers/gpu/drm/drm_fbconv_helper.c + +Contact: Thomas Zimmermann <tzimmermann@suse.de> + +Level: Advanced diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index 8147c3f218bf..230ad59b462b 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -7,6 +7,7 @@ Linux Hardware Monitoring hwmon-kernel-api pmbus-core + inspur-ipsps1 submitting-patches sysfs-interface userspace-tools diff --git a/Documentation/hwmon/inspur-ipsps1.rst b/Documentation/hwmon/inspur-ipsps1.rst index 2b871ae3448f..292c0c26bdd1 100644 --- a/Documentation/hwmon/inspur-ipsps1.rst +++ b/Documentation/hwmon/inspur-ipsps1.rst @@ -1,5 +1,5 @@ Kernel driver inspur-ipsps1 -======================= +=========================== Supported chips: diff --git a/Documentation/hwmon/k10temp.rst b/Documentation/hwmon/k10temp.rst index 12a86ba17de9..4451d59b9425 100644 --- a/Documentation/hwmon/k10temp.rst +++ b/Documentation/hwmon/k10temp.rst @@ -21,10 +21,17 @@ Supported chips: * AMD Family 14h processors: "Brazos" (C/E/G/Z-Series) -* AMD Family 15h processors: "Bulldozer" (FX-Series), "Trinity", "Kaveri", "Carrizo" +* AMD Family 15h processors: "Bulldozer" (FX-Series), "Trinity", "Kaveri", + "Carrizo", "Stoney Ridge", "Bristol Ridge" * AMD Family 16h processors: "Kabini", "Mullins" +* AMD Family 17h processors: "Zen", "Zen 2" + +* AMD Family 18h processors: "Hygon Dhyana" + +* AMD Family 19h processors: "Zen 3" + Prefix: 'k10temp' Addresses scanned: PCI space @@ -110,3 +117,12 @@ The maximum value for Tctl is available in the file temp1_max. If the BIOS has enabled hardware temperature control, the threshold at which the processor will throttle itself to avoid damage is available in temp1_crit and temp1_crit_hyst. + +On some AMD CPUs, there is a difference between the die temperature (Tdie) and +the reported temperature (Tctl). Tdie is the real measured temperature, and +Tctl is used for fan control. While Tctl is always available as temp1_input, +the driver exports Tdie temperature as temp2_input for those CPUs which support +it. + +Models from 17h family report relative temperature, the driver aims to +compensate and report the real temperature. diff --git a/Documentation/networking/device_drivers/intel/e100.rst b/Documentation/networking/device_drivers/intel/e100.rst index 2b9f4887beda..caf023cc88de 100644 --- a/Documentation/networking/device_drivers/intel/e100.rst +++ b/Documentation/networking/device_drivers/intel/e100.rst @@ -1,8 +1,8 @@ .. SPDX-License-Identifier: GPL-2.0+ -============================================================== -Linux* Base Driver for the Intel(R) PRO/100 Family of Adapters -============================================================== +============================================================= +Linux Base Driver for the Intel(R) PRO/100 Family of Adapters +============================================================= June 1, 2018 @@ -21,7 +21,7 @@ Contents In This Release =============== -This file describes the Linux* Base Driver for the Intel(R) PRO/100 Family of +This file describes the Linux Base Driver for the Intel(R) PRO/100 Family of Adapters. This driver includes support for Itanium(R)2-based systems. For questions related to hardware requirements, refer to the documentation @@ -138,9 +138,9 @@ version 1.6 or later is required for this functionality. The latest release of ethtool can be found from https://www.kernel.org/pub/software/network/ethtool/ -Enabling Wake on LAN* (WoL) ---------------------------- -WoL is provided through the ethtool* utility. For instructions on +Enabling Wake on LAN (WoL) +-------------------------- +WoL is provided through the ethtool utility. For instructions on enabling WoL with ethtool, refer to the ethtool man page. WoL will be enabled on the system during the next shut down or reboot. For this driver version, in order to enable WoL, the e100 driver must be loaded diff --git a/Documentation/networking/device_drivers/intel/e1000.rst b/Documentation/networking/device_drivers/intel/e1000.rst index 956560b6e745..4aaae0f7d6ba 100644 --- a/Documentation/networking/device_drivers/intel/e1000.rst +++ b/Documentation/networking/device_drivers/intel/e1000.rst @@ -1,8 +1,8 @@ .. SPDX-License-Identifier: GPL-2.0+ -=========================================================== -Linux* Base Driver for Intel(R) Ethernet Network Connection -=========================================================== +========================================================== +Linux Base Driver for Intel(R) Ethernet Network Connection +========================================================== Intel Gigabit Linux driver. Copyright(c) 1999 - 2013 Intel Corporation. @@ -438,10 +438,10 @@ ethtool The latest release of ethtool can be found from https://www.kernel.org/pub/software/network/ethtool/ -Enabling Wake on LAN* (WoL) ---------------------------- +Enabling Wake on LAN (WoL) +-------------------------- - WoL is configured through the ethtool* utility. + WoL is configured through the ethtool utility. WoL will be enabled on the system during the next shut down or reboot. For this driver version, in order to enable WoL, the e1000 driver must be diff --git a/Documentation/networking/device_drivers/intel/e1000e.rst b/Documentation/networking/device_drivers/intel/e1000e.rst index 01999f05509c..f49cd370e7bf 100644 --- a/Documentation/networking/device_drivers/intel/e1000e.rst +++ b/Documentation/networking/device_drivers/intel/e1000e.rst @@ -1,8 +1,8 @@ .. SPDX-License-Identifier: GPL-2.0+ -====================================================== -Linux* Driver for Intel(R) Ethernet Network Connection -====================================================== +===================================================== +Linux Driver for Intel(R) Ethernet Network Connection +===================================================== Intel Gigabit Linux driver. Copyright(c) 2008-2018 Intel Corporation. @@ -338,7 +338,7 @@ and higher cannot be forced. Use the autonegotiation advertising setting to manually set devices for 1 Gbps and higher. Speed, duplex, and autonegotiation advertising are configured through the -ethtool* utility. +ethtool utility. Caution: Only experienced network administrators should force speed and duplex or change autonegotiation advertising manually. The settings at the switch must @@ -351,9 +351,9 @@ will not attempt to auto-negotiate with its link partner since those adapters operate only in full duplex and only at their native speed. -Enabling Wake on LAN* (WoL) ---------------------------- -WoL is configured through the ethtool* utility. +Enabling Wake on LAN (WoL) +-------------------------- +WoL is configured through the ethtool utility. WoL will be enabled on the system during the next shut down or reboot. For this driver version, in order to enable WoL, the e1000e driver must be loaded diff --git a/Documentation/networking/device_drivers/intel/fm10k.rst b/Documentation/networking/device_drivers/intel/fm10k.rst index ac3269e34f55..4d279e64e221 100644 --- a/Documentation/networking/device_drivers/intel/fm10k.rst +++ b/Documentation/networking/device_drivers/intel/fm10k.rst @@ -1,8 +1,8 @@ .. SPDX-License-Identifier: GPL-2.0+ -============================================================== -Linux* Base Driver for Intel(R) Ethernet Multi-host Controller -============================================================== +============================================================= +Linux Base Driver for Intel(R) Ethernet Multi-host Controller +============================================================= August 20, 2018 Copyright(c) 2015-2018 Intel Corporation. @@ -120,8 +120,8 @@ rx-flow-hash tcp4|udp4|ah4|esp4|sctp4|tcp6|udp6|ah6|esp6|sctp6 m|v|t|s|d|f|n|r Known Issues/Troubleshooting ============================ -Enabling SR-IOV in a 64-bit Microsoft* Windows Server* 2012/R2 guest OS under Linux KVM ---------------------------------------------------------------------------------------- +Enabling SR-IOV in a 64-bit Microsoft Windows Server 2012/R2 guest OS under Linux KVM +------------------------------------------------------------------------------------- KVM Hypervisor/VMM supports direct assignment of a PCIe device to a VM. This includes traditional PCIe devices, as well as SR-IOV-capable devices based on the Intel Ethernet Controller XL710. diff --git a/Documentation/networking/device_drivers/intel/i40e.rst b/Documentation/networking/device_drivers/intel/i40e.rst index 848fd388fa6e..8a9b18573688 100644 --- a/Documentation/networking/device_drivers/intel/i40e.rst +++ b/Documentation/networking/device_drivers/intel/i40e.rst @@ -1,8 +1,8 @@ .. SPDX-License-Identifier: GPL-2.0+ -================================================================== -Linux* Base Driver for the Intel(R) Ethernet Controller 700 Series -================================================================== +================================================================= +Linux Base Driver for the Intel(R) Ethernet Controller 700 Series +================================================================= Intel 40 Gigabit Linux driver. Copyright(c) 1999-2018 Intel Corporation. @@ -384,7 +384,7 @@ NOTE: You cannot set the speed for devices based on the Intel(R) Ethernet Network Adapter XXV710 based devices. Speed, duplex, and autonegotiation advertising are configured through the -ethtool* utility. +ethtool utility. Caution: Only experienced network administrators should force speed and duplex or change autonegotiation advertising manually. The settings at the switch must diff --git a/Documentation/networking/device_drivers/intel/iavf.rst b/Documentation/networking/device_drivers/intel/iavf.rst index cfc08842e32c..84ac7e75f363 100644 --- a/Documentation/networking/device_drivers/intel/iavf.rst +++ b/Documentation/networking/device_drivers/intel/iavf.rst @@ -1,8 +1,8 @@ .. SPDX-License-Identifier: GPL-2.0+ -================================================================== -Linux* Base Driver for Intel(R) Ethernet Adaptive Virtual Function -================================================================== +================================================================= +Linux Base Driver for Intel(R) Ethernet Adaptive Virtual Function +================================================================= Intel Ethernet Adaptive Virtual Function Linux driver. Copyright(c) 2013-2018 Intel Corporation. @@ -19,7 +19,7 @@ Contents Overview ======== -This file describes the iavf Linux* Base Driver. This driver was formerly +This file describes the iavf Linux Base Driver. This driver was formerly called i40evf. The iavf driver supports the below mentioned virtual function devices and diff --git a/Documentation/networking/device_drivers/intel/ice.rst b/Documentation/networking/device_drivers/intel/ice.rst index c220aa2711c6..ee43ea57d443 100644 --- a/Documentation/networking/device_drivers/intel/ice.rst +++ b/Documentation/networking/device_drivers/intel/ice.rst @@ -1,8 +1,8 @@ .. SPDX-License-Identifier: GPL-2.0+ -=================================================================== -Linux* Base Driver for the Intel(R) Ethernet Connection E800 Series -=================================================================== +================================================================== +Linux Base Driver for the Intel(R) Ethernet Connection E800 Series +================================================================== Intel ice Linux driver. Copyright(c) 2018 Intel Corporation. diff --git a/Documentation/networking/device_drivers/intel/igb.rst b/Documentation/networking/device_drivers/intel/igb.rst index fc8cfaa5dcfa..87e560fe5eaa 100644 --- a/Documentation/networking/device_drivers/intel/igb.rst +++ b/Documentation/networking/device_drivers/intel/igb.rst @@ -1,8 +1,8 @@ .. SPDX-License-Identifier: GPL-2.0+ -=========================================================== -Linux* Base Driver for Intel(R) Ethernet Network Connection -=========================================================== +========================================================== +Linux Base Driver for Intel(R) Ethernet Network Connection +========================================================== Intel Gigabit Linux driver. Copyright(c) 1999-2018 Intel Corporation. @@ -129,9 +129,9 @@ version is required for this functionality. Download it at: https://www.kernel.org/pub/software/network/ethtool/ -Enabling Wake on LAN* (WoL) ---------------------------- -WoL is configured through the ethtool* utility. +Enabling Wake on LAN (WoL) +-------------------------- +WoL is configured through the ethtool utility. WoL will be enabled on the system during the next shut down or reboot. For this driver version, in order to enable WoL, the igb driver must be loaded diff --git a/Documentation/networking/device_drivers/intel/igbvf.rst b/Documentation/networking/device_drivers/intel/igbvf.rst index 9cddabe8108e..557fc020ef31 100644 --- a/Documentation/networking/device_drivers/intel/igbvf.rst +++ b/Documentation/networking/device_drivers/intel/igbvf.rst @@ -1,8 +1,8 @@ .. SPDX-License-Identifier: GPL-2.0+ -============================================================ -Linux* Base Virtual Function Driver for Intel(R) 1G Ethernet -============================================================ +=========================================================== +Linux Base Virtual Function Driver for Intel(R) 1G Ethernet +=========================================================== Intel Gigabit Virtual Function Linux driver. Copyright(c) 1999-2018 Intel Corporation. diff --git a/Documentation/networking/device_drivers/intel/ixgbe.rst b/Documentation/networking/device_drivers/intel/ixgbe.rst index c7d25483fedb..f1d5233e5e51 100644 --- a/Documentation/networking/device_drivers/intel/ixgbe.rst +++ b/Documentation/networking/device_drivers/intel/ixgbe.rst @@ -1,8 +1,8 @@ .. SPDX-License-Identifier: GPL-2.0+ -============================================================================= -Linux* Base Driver for the Intel(R) Ethernet 10 Gigabit PCI Express Adapters -============================================================================= +=========================================================================== +Linux Base Driver for the Intel(R) Ethernet 10 Gigabit PCI Express Adapters +=========================================================================== Intel 10 Gigabit Linux driver. Copyright(c) 1999-2018 Intel Corporation. @@ -519,8 +519,8 @@ The offload is also supported for ixgbe's VFs, but the VF must be set as Known Issues/Troubleshooting ============================ -Enabling SR-IOV in a 64-bit Microsoft* Windows Server* 2012/R2 guest OS ------------------------------------------------------------------------ +Enabling SR-IOV in a 64-bit Microsoft Windows Server 2012/R2 guest OS +--------------------------------------------------------------------- Linux KVM Hypervisor/VMM supports direct assignment of a PCIe device to a VM. This includes traditional PCIe devices, as well as SR-IOV-capable devices based on the Intel Ethernet Controller XL710. diff --git a/Documentation/networking/device_drivers/intel/ixgbevf.rst b/Documentation/networking/device_drivers/intel/ixgbevf.rst index 5d4977360157..76bbde736f21 100644 --- a/Documentation/networking/device_drivers/intel/ixgbevf.rst +++ b/Documentation/networking/device_drivers/intel/ixgbevf.rst @@ -1,8 +1,8 @@ .. SPDX-License-Identifier: GPL-2.0+ -============================================================= -Linux* Base Virtual Function Driver for Intel(R) 10G Ethernet -============================================================= +============================================================ +Linux Base Virtual Function Driver for Intel(R) 10G Ethernet +============================================================ Intel 10 Gigabit Virtual Function Linux driver. Copyright(c) 1999-2018 Intel Corporation. diff --git a/Documentation/networking/device_drivers/pensando/ionic.rst b/Documentation/networking/device_drivers/pensando/ionic.rst index 67b6839d516b..c17d680cf334 100644 --- a/Documentation/networking/device_drivers/pensando/ionic.rst +++ b/Documentation/networking/device_drivers/pensando/ionic.rst @@ -1,8 +1,8 @@ .. SPDX-License-Identifier: GPL-2.0+ -========================================================== -Linux* Driver for the Pensando(R) Ethernet adapter family -========================================================== +======================================================== +Linux Driver for the Pensando(R) Ethernet adapter family +======================================================== Pensando Linux Ethernet driver. Copyright(c) 2019 Pensando Systems, Inc @@ -36,8 +36,10 @@ Support ======= For general Linux networking support, please use the netdev mailing list, which is monitored by Pensando personnel:: + netdev@vger.kernel.org For more specific support needs, please use the Pensando driver support email:: - drivers@pensando.io + + drivers@pensando.io diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 49e95f438ed7..8d4ad1d1ae26 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -207,8 +207,8 @@ TCP variables: somaxconn - INTEGER Limit of socket listen() backlog, known in userspace as SOMAXCONN. - Defaults to 128. See also tcp_max_syn_backlog for additional tuning - for TCP sockets. + Defaults to 4096. (Was 128 before linux-5.4) + See also tcp_max_syn_backlog for additional tuning for TCP sockets. tcp_abort_on_overflow - BOOLEAN If listening service is too slow to accept new connections, @@ -408,11 +408,14 @@ tcp_max_orphans - INTEGER up to ~64K of unswappable memory. tcp_max_syn_backlog - INTEGER - Maximal number of remembered connection requests, which have not - received an acknowledgment from connecting client. + Maximal number of remembered connection requests (SYN_RECV), + which have not received an acknowledgment from connecting client. + This is a per-listener limit. The minimal value is 128 for low memory machines, and it will increase in proportion to the memory of machine. If server suffers from overload, try increasing this number. + Remember to also check /proc/sys/net/core/somaxconn + A SYN_RECV request socket consumes about 304 bytes of memory. tcp_max_tw_buckets - INTEGER Maximal number of timewait sockets held by system simultaneously. diff --git a/Documentation/networking/net_dim.txt b/Documentation/networking/net_dim.txt index 9cb31c5e2dcd..9bdb7d5a3ba3 100644 --- a/Documentation/networking/net_dim.txt +++ b/Documentation/networking/net_dim.txt @@ -92,16 +92,16 @@ under some conditions. Part III: Registering a Network Device to DIM ============================================== -Net DIM API exposes the main function net_dim(struct net_dim *dim, -struct net_dim_sample end_sample). This function is the entry point to the Net +Net DIM API exposes the main function net_dim(struct dim *dim, +struct dim_sample end_sample). This function is the entry point to the Net DIM algorithm and has to be called every time the driver would like to check if it should change interrupt moderation parameters. The driver should provide two -data structures: struct net_dim and struct net_dim_sample. Struct net_dim +data structures: struct dim and struct dim_sample. Struct dim describes the state of DIM for a specific object (RX queue, TX queue, other queues, etc.). This includes the current selected profile, previous data samples, the callback function provided by the driver and more. -Struct net_dim_sample describes a data sample, which will be compared to the -data sample stored in struct net_dim in order to decide on the algorithm's next +Struct dim_sample describes a data sample, which will be compared to the +data sample stored in struct dim in order to decide on the algorithm's next step. The sample should include bytes, packets and interrupts, measured by the driver. @@ -110,9 +110,9 @@ main net_dim() function. The recommended method is to call net_dim() on each interrupt. Since Net DIM has a built-in moderation and it might decide to skip iterations under certain conditions, there is no need to moderate the net_dim() calls as well. As mentioned above, the driver needs to provide an object of type -struct net_dim to the net_dim() function call. It is advised for each entity -using Net DIM to hold a struct net_dim as part of its data structure and use it -as the main Net DIM API object. The struct net_dim_sample should hold the latest +struct dim to the net_dim() function call. It is advised for each entity +using Net DIM to hold a struct dim as part of its data structure and use it +as the main Net DIM API object. The struct dim_sample should hold the latest bytes, packets and interrupts count. No need to perform any calculations, just include the raw data. @@ -132,19 +132,19 @@ usage is not complete but it should make the outline of the usage clear. my_driver.c: -#include <linux/net_dim.h> +#include <linux/dim.h> /* Callback for net DIM to schedule on a decision to change moderation */ void my_driver_do_dim_work(struct work_struct *work) { - /* Get struct net_dim from struct work_struct */ - struct net_dim *dim = container_of(work, struct net_dim, - work); + /* Get struct dim from struct work_struct */ + struct dim *dim = container_of(work, struct dim, + work); /* Do interrupt moderation related stuff */ ... /* Signal net DIM work is done and it should move to next iteration */ - dim->state = NET_DIM_START_MEASURE; + dim->state = DIM_START_MEASURE; } /* My driver's interrupt handler */ @@ -152,13 +152,13 @@ int my_driver_handle_interrupt(struct my_driver_entity *my_entity, ...) { ... /* A struct to hold current measured data */ - struct net_dim_sample dim_sample; + struct dim_sample dim_sample; ... /* Initiate data sample struct with current data */ - net_dim_sample(my_entity->events, - my_entity->packets, - my_entity->bytes, - &dim_sample); + dim_update_sample(my_entity->events, + my_entity->packets, + my_entity->bytes, + &dim_sample); /* Call net DIM */ net_dim(&my_entity->dim, dim_sample); ... diff --git a/Documentation/networking/tls-offload.rst b/Documentation/networking/tls-offload.rst index 0dd3f748239f..f914e81fd3a6 100644 --- a/Documentation/networking/tls-offload.rst +++ b/Documentation/networking/tls-offload.rst @@ -436,6 +436,10 @@ by the driver: encryption. * ``tx_tls_ooo`` - number of TX packets which were part of a TLS stream but did not arrive in the expected order. + * ``tx_tls_skip_no_sync_data`` - number of TX packets which were part of + a TLS stream and arrived out-of-order, but skipped the HW offload routine + and went to the regular transmit flow as they were retransmissions of the + connection handshake. * ``tx_tls_drop_no_sync_data`` - number of TX packets which were part of a TLS stream dropped, because they arrived out of order and associated record could not be found. diff --git a/Documentation/process/coding-style.rst b/Documentation/process/coding-style.rst index f4a2198187f9..ada573b7d703 100644 --- a/Documentation/process/coding-style.rst +++ b/Documentation/process/coding-style.rst @@ -56,7 +56,7 @@ instead of ``double-indenting`` the ``case`` labels. E.g.: case 'K': case 'k': mem <<= 10; - /* fall through */ + fallthrough; default: break; } diff --git a/Documentation/process/deprecated.rst b/Documentation/process/deprecated.rst index 053b24a6dd38..179f2a5625a0 100644 --- a/Documentation/process/deprecated.rst +++ b/Documentation/process/deprecated.rst @@ -122,14 +122,27 @@ memory adjacent to the stack (when built without `CONFIG_VMAP_STACK=y`) Implicit switch case fall-through --------------------------------- -The C language allows switch cases to "fall through" when -a "break" statement is missing at the end of a case. This, -however, introduces ambiguity in the code, as it's not always -clear if the missing break is intentional or a bug. As there -have been a long list of flaws `due to missing "break" statements +The C language allows switch cases to "fall-through" when a "break" statement +is missing at the end of a case. This, however, introduces ambiguity in the +code, as it's not always clear if the missing break is intentional or a bug. + +As there have been a long list of flaws `due to missing "break" statements <https://cwe.mitre.org/data/definitions/484.html>`_, we no longer allow -"implicit fall-through". In order to identify an intentional fall-through -case, we have adopted the marking used by static analyzers: a comment -saying `/* Fall through */`. Once the C++17 `__attribute__((fallthrough))` -is more widely handled by C compilers, static analyzers, and IDEs, we can -switch to using that instead. +"implicit fall-through". + +In order to identify intentional fall-through cases, we have adopted a +pseudo-keyword macro 'fallthrough' which expands to gcc's extension +__attribute__((__fallthrough__)). `Statement Attributes +<https://gcc.gnu.org/onlinedocs/gcc/Statement-Attributes.html>`_ + +When the C17/C18 [[fallthrough]] syntax is more commonly supported by +C compilers, static analyzers, and IDEs, we can switch to using that syntax +for the macro pseudo-keyword. + +All switch/case blocks must end in one of: + + break; + fallthrough; + continue; + goto <label>; + return [expression]; diff --git a/Documentation/usb/rio.rst b/Documentation/usb/rio.rst deleted file mode 100644 index ea73475471db..000000000000 --- a/Documentation/usb/rio.rst +++ /dev/null @@ -1,109 +0,0 @@ -============ -Diamonds Rio -============ - -Copyright (C) 1999, 2000 Bruce Tenison - -Portions Copyright (C) 1999, 2000 David Nelson - -Thanks to David Nelson for guidance and the usage of the scanner.txt -and scanner.c files to model our driver and this informative file. - -Mar. 2, 2000 - -Changes -======= - -- Initial Revision - - -Overview -======== - -This README will address issues regarding how to configure the kernel -to access a RIO 500 mp3 player. -Before I explain how to use this to access the Rio500 please be warned: - -.. warning:: - - Please note that this software is still under development. The authors - are in no way responsible for any damage that may occur, no matter how - inconsequential. - -It seems that the Rio has a problem when sending .mp3 with low batteries. -I suggest when the batteries are low and you want to transfer stuff that you -replace it with a fresh one. In my case, what happened is I lost two 16kb -blocks (they are no longer usable to store information to it). But I don't -know if that's normal or not; it could simply be a problem with the flash -memory. - -In an extreme case, I left my Rio playing overnight and the batteries wore -down to nothing and appear to have corrupted the flash memory. My RIO -needed to be replaced as a result. Diamond tech support is aware of the -problem. Do NOT allow your batteries to wear down to nothing before -changing them. It appears RIO 500 firmware does not handle low battery -power well at all. - -On systems with OHCI controllers, the kernel OHCI code appears to have -power on problems with some chipsets. If you are having problems -connecting to your RIO 500, try turning it on first and then plugging it -into the USB cable. - -Contact Information -------------------- - - The main page for the project is hosted at sourceforge.net in the following - URL: <http://rio500.sourceforge.net>. You can also go to the project's - sourceforge home page at: <http://sourceforge.net/projects/rio500/>. - There is also a mailing list: rio500-users@lists.sourceforge.net - -Authors -------- - -Most of the code was written by Cesar Miquel <miquel@df.uba.ar>. Keith -Clayton <kclayton@jps.net> is incharge of the PPC port and making sure -things work there. Bruce Tenison <btenison@dibbs.net> is adding support -for .fon files and also does testing. The program will mostly sure be -re-written and Pete Ikusz along with the rest will re-design it. I would -also like to thank Tri Nguyen <tmn_3022000@hotmail.com> who provided use -with some important information regarding the communication with the Rio. - -Additional Information and userspace tools - - http://rio500.sourceforge.net/ - - -Requirements -============ - -A host with a USB port running a Linux kernel with RIO 500 support enabled. - -The driver is a module called rio500, which should be automatically loaded -as you plug in your device. If that fails you can manually load it with - - modprobe rio500 - -Udev should automatically create a device node as soon as plug in your device. -If that fails, you can manually add a device for the USB rio500:: - - mknod /dev/usb/rio500 c 180 64 - -In that case, set appropriate permissions for /dev/usb/rio500 (don't forget -about group and world permissions). Both read and write permissions are -required for proper operation. - -That's it. The Rio500 Utils at: http://rio500.sourceforge.net should -be able to access the rio500. - -Limits -====== - -You can use only a single rio500 device at a time with your computer. - -Bugs -==== - -If you encounter any problems feel free to drop me an email. - -Bruce Tenison -btenison@dibbs.net |