diff options
Diffstat (limited to 'Documentation')
18 files changed, 487 insertions, 5 deletions
diff --git a/Documentation/devicetree/bindings/arm/adapteva.txt b/Documentation/devicetree/bindings/arm/adapteva.txt new file mode 100644 index 000000000000..1d8af9e36065 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/adapteva.txt @@ -0,0 +1,7 @@ +Adapteva Platforms Device Tree Bindings +--------------------------------------- + +Parallella board + +Required root node properties: + - compatible = "adapteva,parallella"; diff --git a/Documentation/devicetree/bindings/arm/armada-380-mpcore-soc-ctrl.txt b/Documentation/devicetree/bindings/arm/armada-380-mpcore-soc-ctrl.txt new file mode 100644 index 000000000000..8781073029e9 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/armada-380-mpcore-soc-ctrl.txt @@ -0,0 +1,14 @@ +Marvell Armada 38x CA9 MPcore SoC Controller +============================================ + +Required properties: + +- compatible: Should be "marvell,armada-380-mpcore-soc-ctrl". + +- reg: should be the register base and length as documented in the + datasheet for the CA9 MPcore SoC Control registers + +mpcore-soc-ctrl@20d20 { + compatible = "marvell,armada-380-mpcore-soc-ctrl"; + reg = <0x20d20 0x6c>; +}; diff --git a/Documentation/devicetree/bindings/arm/atmel-pmc.txt b/Documentation/devicetree/bindings/arm/atmel-pmc.txt index 389bed5056e8..795cc78543fe 100644 --- a/Documentation/devicetree/bindings/arm/atmel-pmc.txt +++ b/Documentation/devicetree/bindings/arm/atmel-pmc.txt @@ -1,7 +1,10 @@ * Power Management Controller (PMC) Required properties: -- compatible: Should be "atmel,at91rm9200-pmc" +- compatible: Should be "atmel,<chip>-pmc". + <chip> can be: at91rm9200, at91sam9260, at91sam9g45, at91sam9n12, + at91sam9x5, sama5d3 + - reg: Should contain PMC registers location and length Examples: diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method new file mode 100644 index 000000000000..8240c023e202 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method @@ -0,0 +1,36 @@ +Broadcom Kona Family CPU Enable Method +-------------------------------------- +This binding defines the enable method used for starting secondary +CPUs in the following Broadcom SoCs: + BCM11130, BCM11140, BCM11351, BCM28145, BCM28155, BCM21664 + +The enable method is specified by defining the following required +properties in the "cpus" device tree node: + - enable-method = "brcm,bcm11351-cpu-method"; + - secondary-boot-reg = <...>; + +The secondary-boot-reg property is a u32 value that specifies the +physical address of the register used to request the ROM holding pen +code release a secondary CPU. The value written to the register is +formed by encoding the target CPU id into the low bits of the +physical start address it should jump to. + +Example: + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "brcm,bcm11351-cpu-method"; + secondary-boot-reg = <0x3500417c>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/arm/brcm-brcmstb.txt b/Documentation/devicetree/bindings/arm/brcm-brcmstb.txt new file mode 100644 index 000000000000..3c436cc4f35d --- /dev/null +++ b/Documentation/devicetree/bindings/arm/brcm-brcmstb.txt @@ -0,0 +1,95 @@ +ARM Broadcom STB platforms Device Tree Bindings +----------------------------------------------- +Boards with Broadcom Brahma15 ARM-based BCMxxxx (generally BCM7xxx variants) +SoC shall have the following DT organization: + +Required root node properties: + - compatible: "brcm,bcm<chip_id>", "brcm,brcmstb" + +example: +/ { + #address-cells = <2>; + #size-cells = <2>; + model = "Broadcom STB (bcm7445)"; + compatible = "brcm,bcm7445", "brcm,brcmstb"; + +Further, syscon nodes that map platform-specific registers used for general +system control is required: + + - compatible: "brcm,bcm<chip_id>-sun-top-ctrl", "syscon" + - compatible: "brcm,bcm<chip_id>-hif-cpubiuctrl", "syscon" + - compatible: "brcm,bcm<chip_id>-hif-continuation", "syscon" + +example: + rdb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0 0x00 0xf0000000 0x1000000>; + + sun_top_ctrl: syscon@404000 { + compatible = "brcm,bcm7445-sun-top-ctrl", "syscon"; + reg = <0x404000 0x51c>; + }; + + hif_cpubiuctrl: syscon@3e2400 { + compatible = "brcm,bcm7445-hif-cpubiuctrl", "syscon"; + reg = <0x3e2400 0x5b4>; + }; + + hif_continuation: syscon@452000 { + compatible = "brcm,bcm7445-hif-continuation", "syscon"; + reg = <0x452000 0x100>; + }; + }; + +Lastly, nodes that allow for support of SMP initialization and reboot are +required: + +smpboot +------- +Required properties: + + - compatible + The string "brcm,brcmstb-smpboot". + + - syscon-cpu + A phandle / integer array property which lets the BSP know the location + of certain CPU power-on registers. + + The layout of the property is as follows: + o a phandle to the "hif_cpubiuctrl" syscon node + o offset to the base CPU power zone register + o offset to the base CPU reset register + + - syscon-cont + A phandle pointing to the syscon node which describes the CPU boot + continuation registers. + o a phandle to the "hif_continuation" syscon node + +example: + smpboot { + compatible = "brcm,brcmstb-smpboot"; + syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>; + syscon-cont = <&hif_continuation>; + }; + +reboot +------- +Required properties + + - compatible + The string property "brcm,brcmstb-reboot". + + - syscon + A phandle / integer array that points to the syscon node which describes + the general system reset registers. + o a phandle to "sun_top_ctrl" + o offset to the "reset source enable" register + o offset to the "software master reset" register + +example: + reboot { + compatible = "brcm,brcmstb-reboot"; + syscon = <&sun_top_ctrl 0x304 0x308>; + }; diff --git a/Documentation/devicetree/bindings/arm/cpu-enable-method/marvell,berlin-smp b/Documentation/devicetree/bindings/arm/cpu-enable-method/marvell,berlin-smp new file mode 100644 index 000000000000..cd236b727e2a --- /dev/null +++ b/Documentation/devicetree/bindings/arm/cpu-enable-method/marvell,berlin-smp @@ -0,0 +1,41 @@ +======================================================== +Secondary CPU enable-method "marvell,berlin-smp" binding +======================================================== + +This document describes the "marvell,berlin-smp" method for enabling secondary +CPUs. To apply to all CPUs, a single "marvell,berlin-smp" enable method should +be defined in the "cpus" node. + +Enable method name: "marvell,berlin-smp" +Compatible machines: "marvell,berlin2" and "marvell,berlin2q" +Compatible CPUs: "marvell,pj4b" and "arm,cortex-a9" +Related properties: (none) + +Note: +This enable method needs valid nodes compatible with "arm,cortex-a9-scu" and +"marvell,berlin-cpu-ctrl"[1]. + +Example: + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "marvell,berlin-smp"; + + cpu@0 { + compatible = "marvell,pj4b"; + device_type = "cpu"; + next-level-cache = <&l2>; + reg = <0>; + }; + + cpu@1 { + compatible = "marvell,pj4b"; + device_type = "cpu"; + next-level-cache = <&l2>; + reg = <1>; + }; + }; + +-- +[1] arm/marvell,berlin.txt diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt index 1fe72a0778cd..298e2f6b33c6 100644 --- a/Documentation/devicetree/bindings/arm/cpus.txt +++ b/Documentation/devicetree/bindings/arm/cpus.txt @@ -152,7 +152,9 @@ nodes to be present and contain the properties described below. "arm,cortex-a7" "arm,cortex-a8" "arm,cortex-a9" + "arm,cortex-a12" "arm,cortex-a15" + "arm,cortex-a17" "arm,cortex-a53" "arm,cortex-a57" "arm,cortex-m0" @@ -163,6 +165,7 @@ nodes to be present and contain the properties described below. "arm,cortex-r4" "arm,cortex-r5" "arm,cortex-r7" + "brcm,brahma-b15" "faraday,fa526" "intel,sa110" "intel,sa1100" @@ -184,6 +187,7 @@ nodes to be present and contain the properties described below. can be one of: "allwinner,sun6i-a31" "arm,psci" + "brcm,brahma-b15" "marvell,armada-375-smp" "marvell,armada-380-smp" "marvell,armada-xp-smp" diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt index 5573c08d3180..c7d2fa156678 100644 --- a/Documentation/devicetree/bindings/arm/gic.txt +++ b/Documentation/devicetree/bindings/arm/gic.txt @@ -16,6 +16,7 @@ Main node required properties: "arm,cortex-a9-gic" "arm,cortex-a7-gic" "arm,arm11mp-gic" + "brcm,brahma-b15-gic" - interrupt-controller : Identifies the node as an interrupt controller - #interrupt-cells : Specifies the number of cells needed to encode an interrupt source. The type shall be a <u32> and the value shall be 3. diff --git a/Documentation/devicetree/bindings/arm/marvell,berlin.txt b/Documentation/devicetree/bindings/arm/marvell,berlin.txt index 94013a9a8769..904de5781f44 100644 --- a/Documentation/devicetree/bindings/arm/marvell,berlin.txt +++ b/Documentation/devicetree/bindings/arm/marvell,berlin.txt @@ -24,6 +24,22 @@ SoC and board used. Currently known SoC compatibles are: ... } +* Marvell Berlin CPU control bindings + +CPU control register allows various operations on CPUs, like resetting them +independently. + +Required properties: +- compatible: should be "marvell,berlin-cpu-ctrl" +- reg: address and length of the register set + +Example: + +cpu-ctrl@f7dd0000 { + compatible = "marvell,berlin-cpu-ctrl"; + reg = <0xf7dd0000 0x10000>; +}; + * Marvell Berlin2 chip control binding Marvell Berlin SoCs have a chip control register set providing several diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index d22b216f5d23..0edc90305dfe 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -129,6 +129,9 @@ Boards: - AM437x GP EVM compatible = "ti,am437x-gp-evm", "ti,am4372", "ti,am43" +- AM437x SK EVM: AM437x StarterKit Evaluation Module + compatible = "ti,am437x-sk-evm", "ti,am4372", "ti,am43" + - DRA742 EVM: Software Development Board for DRA742 compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7" diff --git a/Documentation/devicetree/bindings/arm/omap/prcm.txt b/Documentation/devicetree/bindings/arm/omap/prcm.txt new file mode 100644 index 000000000000..79074dac684a --- /dev/null +++ b/Documentation/devicetree/bindings/arm/omap/prcm.txt @@ -0,0 +1,65 @@ +OMAP PRCM bindings + +Power Reset and Clock Manager lists the device clocks and clockdomains under +a DT hierarchy. Each TI SoC can have multiple PRCM entities listed for it, +each describing one module and the clock hierarchy under it. see [1] for +documentation about the individual clock/clockdomain nodes. + +[1] Documentation/devicetree/bindings/clock/ti/* + +Required properties: +- compatible: Must be one of: + "ti,am3-prcm" + "ti,am3-scrm" + "ti,am4-prcm" + "ti,am4-scrm" + "ti,omap2-prcm" + "ti,omap2-scrm" + "ti,omap3-prm" + "ti,omap3-cm" + "ti,omap3-scrm" + "ti,omap4-cm1" + "ti,omap4-prm" + "ti,omap4-cm2" + "ti,omap4-scrm" + "ti,omap5-prm" + "ti,omap5-cm-core-aon" + "ti,omap5-scrm" + "ti,omap5-cm-core" + "ti,dra7-prm" + "ti,dra7-cm-core-aon" + "ti,dra7-cm-core" +- reg: Contains PRCM module register address range + (base address and length) +- clocks: clocks for this module +- clockdomains: clockdomains for this module + +Example: + +cm: cm@48004000 { + compatible = "ti,omap3-cm"; + reg = <0x48004000 0x4000>; + + cm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + cm_clockdomains: clockdomains { + }; +} + +&cm_clocks { + omap2_32k_fck: omap_32k_fck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; +}; + +&cm_clockdomains { + core_l3_clkdm: core_l3_clkdm { + compatible = "ti,clockdomain"; + clocks = <&sdrc_ick>; + }; +}; diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt b/Documentation/devicetree/bindings/arm/samsung/pmu.txt index f9865e77e0b0..1e1979b229ff 100644 --- a/Documentation/devicetree/bindings/arm/samsung/pmu.txt +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.txt @@ -7,6 +7,8 @@ Properties: - "samsung,exynos4212-pmu" - for Exynos4212 SoC, - "samsung,exynos4412-pmu" - for Exynos4412 SoC, - "samsung,exynos5250-pmu" - for Exynos5250 SoC, + - "samsung,exynos5260-pmu" - for Exynos5260 SoC. + - "samsung,exynos5410-pmu" - for Exynos5410 SoC, - "samsung,exynos5420-pmu" - for Exynos5420 SoC. second value must be always "syscon". diff --git a/Documentation/devicetree/bindings/arm/tegra.txt b/Documentation/devicetree/bindings/arm/tegra.txt index 558ed4b4ef39..73278c6d2dc3 100644 --- a/Documentation/devicetree/bindings/arm/tegra.txt +++ b/Documentation/devicetree/bindings/arm/tegra.txt @@ -30,6 +30,8 @@ board-specific compatible values: nvidia,seaboard nvidia,ventana nvidia,whistler + toradex,apalis_t30 + toradex,apalis_t30-eval toradex,colibri_t20-512 toradex,iris diff --git a/Documentation/devicetree/bindings/arm/xilinx.txt b/Documentation/devicetree/bindings/arm/xilinx.txt index 6f1ed830b4f7..1f7995357888 100644 --- a/Documentation/devicetree/bindings/arm/xilinx.txt +++ b/Documentation/devicetree/bindings/arm/xilinx.txt @@ -1,7 +1,7 @@ -Xilinx Zynq EP107 Emulation Platform board +Xilinx Zynq Platforms Device Tree Bindings -This board is an emulation platform for the Zynq product which is -based on an ARM Cortex A9 processor. +Boards with Zynq-7000 SOC based on an ARM Cortex A9 processor +shall have the following properties. Required root node properties: - - compatible = "xlnx,zynq-ep107"; + - compatible = "xlnx,zynq-7000"; diff --git a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt new file mode 100644 index 000000000000..23bfe8e1f7cc --- /dev/null +++ b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt @@ -0,0 +1,43 @@ +NVIDIA GK20A Graphics Processing Unit + +Required properties: +- compatible: "nvidia,<chip>-<gpu>" + Currently recognized values: + - nvidia,tegra124-gk20a +- reg: Physical base address and length of the controller's registers. + Must contain two entries: + - first entry for bar0 + - second entry for bar1 +- interrupts: Must contain an entry for each entry in interrupt-names. + See ../interrupt-controller/interrupts.txt for details. +- interrupt-names: Must include the following entries: + - stall + - nonstall +- vdd-supply: regulator for supply voltage. +- clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: Must include the following entries: + - gpu + - pwr +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must include the following entries: + - gpu + +Example: + + gpu@0,57000000 { + compatible = "nvidia,gk20a"; + reg = <0x0 0x57000000 0x0 0x01000000>, + <0x0 0x58000000 0x0 0x01000000>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "stall", "nonstall"; + vdd-supply = <&vdd_gpu>; + clocks = <&tegra_car TEGRA124_CLK_GPU>, + <&tegra_car TEGRA124_CLK_PLL_P_OUT5>; + clock-names = "gpu", "pwr"; + resets = <&tegra_car 184>; + reset-names = "gpu"; + status = "disabled"; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt new file mode 100644 index 000000000000..2f9c0bd66457 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt @@ -0,0 +1,127 @@ +Device tree binding for NVIDIA Tegra XUSB pad controller +======================================================== + +The Tegra XUSB pad controller manages a set of lanes, each of which can be +assigned to one out of a set of different pads. Some of these pads have an +associated PHY that must be powered up before the pad can be used. + +This document defines the device-specific binding for the XUSB pad controller. + +Refer to pinctrl-bindings.txt in this directory for generic information about +pin controller device tree bindings and ../phy/phy-bindings.txt for details on +how to describe and reference PHYs in device trees. + +Required properties: +-------------------- +- compatible: should be "nvidia,tegra124-xusb-padctl" +- reg: Physical base address and length of the controller's registers. +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must include the following entries: + - padctl +- #phy-cells: Should be 1. The specifier is the index of the PHY to reference. + See <dt-bindings/pinctrl/pinctrl-tegra-xusb.h> for the list of valid values. + +Lane muxing: +------------ + +Child nodes contain the pinmux configurations following the conventions from +the pinctrl-bindings.txt document. Typically a single, static configuration is +given and applied at boot time. + +Each subnode describes groups of lanes along with parameters and pads that +they should be assigned to. The name of these subnodes is not important. All +subnodes should be parsed solely based on their content. + +Each subnode only applies the parameters that are explicitly listed. In other +words, if a subnode that lists a function but no pin configuration parameters +implies no information about any pin configuration parameters. Similarly, a +subnode that describes only an IDDQ parameter implies no information about +what function the pins are assigned to. For this reason even seemingly boolean +values are actually tristates in this binding: unspecified, off or on. +Unspecified is represented as an absent property, and off/on are represented +as integer values 0 and 1. + +Required properties: +- nvidia,lanes: An array of strings. Each string is the name of a lane. + +Optional properties: +- nvidia,function: A string that is the name of the function (pad) that the + pin or group should be assigned to. Valid values for function names are + listed below. +- nvidia,iddq: Enables IDDQ mode of the lane. (0: no, 1: yes) + +Note that not all of these properties are valid for all lanes. Lanes can be +divided into three groups: + + - otg-0, otg-1, otg-2: + + Valid functions for this group are: "snps", "xusb", "uart", "rsvd". + + The nvidia,iddq property does not apply to this group. + + - ulpi-0, hsic-0, hsic-1: + + Valid functions for this group are: "snps", "xusb". + + The nvidia,iddq property does not apply to this group. + + - pcie-0, pcie-1, pcie-2, pcie-3, pcie-4, sata-0: + + Valid functions for this group are: "pcie", "usb3", "sata", "rsvd". + + +Example: +======== + +SoC file extract: +----------------- + + padctl@0,7009f000 { + compatible = "nvidia,tegra124-xusb-padctl"; + reg = <0x0 0x7009f000 0x0 0x1000>; + resets = <&tegra_car 142>; + reset-names = "padctl"; + + #phy-cells = <1>; + }; + +Board file extract: +------------------- + + pcie-controller@0,01003000 { + ... + + phys = <&padctl 0>; + phy-names = "pcie"; + + ... + }; + + ... + + padctl: padctl@0,7009f000 { + pinctrl-0 = <&padctl_default>; + pinctrl-names = "default"; + + padctl_default: pinmux { + usb3 { + nvidia,lanes = "pcie-0", "pcie-1"; + nvidia,function = "usb3"; + nvidia,iddq = <0>; + }; + + pcie { + nvidia,lanes = "pcie-2", "pcie-3", + "pcie-4"; + nvidia,function = "pcie"; + nvidia,iddq = <0>; + }; + + sata { + nvidia,lanes = "sata-0"; + nvidia,function = "sata"; + nvidia,iddq = <0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.txt b/Documentation/devicetree/bindings/serial/cdns,uart.txt new file mode 100644 index 000000000000..a3eb154c32ca --- /dev/null +++ b/Documentation/devicetree/bindings/serial/cdns,uart.txt @@ -0,0 +1,20 @@ +Binding for Cadence UART Controller + +Required properties: +- compatible : should be "cdns,uart-r1p8", or "xlnx,xuartps" +- reg: Should contain UART controller registers location and length. +- interrupts: Should contain UART controller interrupts. +- clocks: Must contain phandles to the UART clocks + See ../clocks/clock-bindings.txt for details. +- clock-names: Tuple to identify input clocks, must contain "uart_clk" and "pclk" + See ../clocks/clock-bindings.txt for details. + + +Example: + uart@e0000000 { + compatible = "cdns,uart-r1p8"; + clocks = <&clkc 23>, <&clkc 40>; + clock-names = "uart_clk", "pclk"; + reg = <0xE0000000 0x1000>; + interrupts = <0 27 4>; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index d415b38ec8ca..3dc9188ce023 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -6,6 +6,7 @@ using them to avoid name-space collisions. abilis Abilis Systems active-semi Active-Semi International Inc ad Avionic Design GmbH +adapteva Adapteva, Inc. adi Analog Devices, Inc. aeroflexgaisler Aeroflex Gaisler AB ak Asahi Kasei Corp. @@ -72,6 +73,7 @@ karo Ka-Ro electronics GmbH keymile Keymile GmbH lacie LaCie lantiq Lantiq Semiconductor +lenovo Lenovo Group Ltd. lg LG Corporation linux Linux-specific binding lsi LSI Corp. (LSI Logic) @@ -124,6 +126,7 @@ sii Seiko Instruments, Inc. sirf SiRF Technology, Inc. smsc Standard Microsystems Corporation snps Synopsys, Inc. +solidrun SolidRun spansion Spansion Inc. st STMicroelectronics ste ST-Ericsson |