diff options
Diffstat (limited to 'arch/arm/boot')
| -rw-r--r-- | arch/arm/boot/dts/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/boot/dts/orion5x-lswsgl.dts | 276 |
2 files changed, 277 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 8e12ec534f2e..7f30fc3bb2f8 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -467,6 +467,7 @@ dtb-$(CONFIG_ARCH_ORION5X) += \ orion5x-lacie-d2-network.dtb \ orion5x-lacie-ethernet-disk-mini-v2.dtb \ orion5x-linkstation-lswtgl.dtb \ + orion5x-lswsgl.dtb \ orion5x-maxtor-shared-storage-2.dtb \ orion5x-rd88f5182-nas.dtb dtb-$(CONFIG_ARCH_PRIMA2) += \ diff --git a/arch/arm/boot/dts/orion5x-lswsgl.dts b/arch/arm/boot/dts/orion5x-lswsgl.dts new file mode 100644 index 000000000000..6b47a52ceb9c --- /dev/null +++ b/arch/arm/boot/dts/orion5x-lswsgl.dts @@ -0,0 +1,276 @@ +/* + * Copyright (C) 2015 Benjamin Cama <benoar@dolka.fr> + * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * Based on the board file arch/arm/mach-orion5x/lsmini-setup.c, + * Copyright (C) 2008 Alexey Kopytko <alexey@kopytko.ru> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "orion5x-mv88f5182.dtsi" + +/ { + model = "Buffalo Linkstation Mini (LS-WSGL)"; + compatible = "buffalo,lswsgl", "marvell,orion5x-88f5182", "marvell,orion5x"; + + memory { + reg = <0x00000000 0x8000000>; /* 128 MB */ + }; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + linux,stdout-path = &uart0; + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>, + <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>, + <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&pmx_buttons>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + func { + label = "Function Button"; + linux,code = <KEY_OPTION>; + gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + }; + + power { + label = "Power-on Switch"; + linux,input-type = <5>; /* EV_SW */ + linux,code = <KEY_RESERVED>; /* LSMINI_SW_POWER */ + gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; + }; + + autopower { + label = "Power-auto Switch"; + linux,input-type = <5>; /* EV_SW */ + linux,code = <KEY_ESC>; /* LSMINI_SW_AUTOPOWER */ + gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_led_alarm &pmx_led_info &pmx_led_func + &pmx_led_power>; + pinctrl-names = "default"; + + alarm { + label = "lswsgl:alarm:red"; + gpio = <&gpio0 2 GPIO_ACTIVE_LOW>; + }; + + info { + label = "lswsgl:info:amber"; + gpio = <&gpio0 3 GPIO_ACTIVE_LOW>; + }; + + func { + label = "lswsgl:func:blue:top"; + gpio = <&gpio0 9 GPIO_ACTIVE_LOW>; + }; + + power { + label = "lswsgl:power:blue:bottom"; + gpio = <&gpio0 14 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + }; + + restart_poweroff { + compatible = "restart-poweroff"; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_sata0_power &pmx_sata1_power &pmx_usb_power>; + pinctrl-names = "default"; + + sata0_power: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "SATA0 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 1 GPIO_ACTIVE_HIGH>; + }; + + sata1_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "SATA1 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 19 GPIO_ACTIVE_HIGH>; + }; + + usb_power: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&devbus_bootcs { + status = "okay"; + + devbus,keep-config; + + flash@0 { + compatible = "cfi-flash"; + reg = <0 0x40000>; + bank-width = <1>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Full256Kb"; + reg = <0 0x40000>; + read-only; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy: ethernet-phy { + reg = <8>; + }; +}; + +&ehci0 { + status = "okay"; +}; + +ð { + status = "okay"; + + ethernet-port@0 { + phy-handle = <ðphy>; + }; +}; + +&i2c { + status = "okay"; + clock-frequency = <100000>; + #address-cells = <1>; + + rtc@32 { + compatible = "ricoh,rs5c372a"; + reg = <0x32>; + }; +}; + +&pinctrl { + pmx_buttons: pmx-buttons { + marvell,pins = "mpp15", "mpp17", "mpp18"; + marvell,function = "gpio"; + }; + + pmx_led_alarm: pmx-leds { + marvell,pins = "mpp2"; + marvell,function = "gpio"; + }; + + pmx_led_info: pmx-leds { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; + + pmx_led_func: pmx-leds { + marvell,pins = "mpp9"; + marvell,function = "gpio"; + }; + + pmx_led_power: pmx-leds { + marvell,pins = "mpp14"; + marvell,function = "gpio"; + }; + + pmx_sata0_power: pmx-sata0-power { + marvell,pins = "mpp1"; + marvell,function = "gpio"; + }; + + pmx_sata1_power: pmx-sata1-power { + marvell,pins = "mpp19"; + marvell,function = "gpio"; + }; + + pmx_usb_power: pmx-usb-power { + marvell,pins = "mpp16"; + marvell,function = "gpio"; + }; +}; + +&sata { + status = "okay"; + nr-ports = <2>; +}; + +&uart0 { + status = "okay"; +}; |