diff options
Diffstat (limited to 'arch/arm/boot')
405 files changed, 8141 insertions, 2072 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 4572db3fa5ae..ce66ffd5a1bb 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -43,6 +43,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ at91-smartkiz.dtb \ at91-wb45n.dtb \ at91sam9g15ek.dtb \ + at91sam9g25-gardena-smart-gateway.dtb \ at91sam9g25ek.dtb \ at91sam9g35ek.dtb \ at91sam9x25ek.dtb \ @@ -127,6 +128,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm47094-luxul-xwr-3150-v1.dtb \ bcm47094-netgear-r8500.dtb \ bcm47094-phicomm-k3.dtb \ + bcm53016-meraki-mr32.dtb \ bcm94708.dtb \ bcm94709.dtb \ bcm953012er.dtb \ @@ -357,6 +359,8 @@ dtb-$(CONFIG_ARCH_MPS2) += \ mps2-an399.dtb dtb-$(CONFIG_ARCH_MOXART) += \ moxart-uc7112lx.dtb +dtb-$(CONFIG_ARCH_SD5203) += \ + sd5203.dtb dtb-$(CONFIG_SOC_IMX1) += \ imx1-ads.dtb \ imx1-apf9328.dtb @@ -482,6 +486,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-wandboard-revd1.dtb \ imx6dl-yapp4-draco.dtb \ imx6dl-yapp4-hydra.dtb \ + imx6dl-yapp4-orion.dtb \ imx6dl-yapp4-ursa.dtb \ imx6q-apalis-eval.dtb \ imx6q-apalis-ixora.dtb \ @@ -531,6 +536,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-icore-ofcap12.dtb \ imx6q-icore-rqs.dtb \ imx6q-kp-tpc.dtb \ + imx6q-logicpd.dtb \ imx6q-marsboard.dtb \ imx6q-mccmon6.dtb \ imx6q-nitrogen6x.dtb \ @@ -585,6 +591,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6qp-zii-rdu2.dtb dtb-$(CONFIG_SOC_IMX6SL) += \ imx6sl-evk.dtb \ + imx6sl-tolino-shine2hd.dtb \ imx6sl-tolino-shine3.dtb \ imx6sl-warp.dtb dtb-$(CONFIG_SOC_IMX6SLL) += \ @@ -868,7 +875,12 @@ dtb-$(CONFIG_ARCH_ORION5X) += \ dtb-$(CONFIG_ARCH_ACTIONS) += \ owl-s500-cubieboard6.dtb \ owl-s500-guitar-bb-rev-b.dtb \ + owl-s500-labrador-base-m.dtb \ + owl-s500-roseapplepi.dtb \ owl-s500-sparky.dtb +dtb-$(CONFIG_ARCH_PICOXCELL) += \ + picoxcell-pc7302-pc3x2.dtb \ + picoxcell-pc7302-pc3x3.dtb dtb-$(CONFIG_ARCH_PRIMA2) += \ prima2-evb.dtb dtb-$(CONFIG_ARCH_PXA) += \ @@ -1047,6 +1059,7 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32746g-eval.dtb \ stm32h743i-eval.dtb \ stm32h743i-disco.dtb \ + stm32mp153c-dhcom-drc02.dtb \ stm32mp157a-avenger96.dtb \ stm32mp157a-dhcor-avenger96.dtb \ stm32mp157a-dk1.dtb \ @@ -1056,7 +1069,8 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32mp157c-dk2.dtb \ stm32mp157c-ed1.dtb \ stm32mp157c-ev1.dtb \ - stm32mp157c-lxa-mc1.dtb + stm32mp157c-lxa-mc1.dtb \ + stm32mp157c-odyssey.dtb dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-a1000.dtb \ sun4i-a10-ba10-tvbox.dtb \ @@ -1194,6 +1208,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-r16-parrot.dtb \ sun8i-r40-bananapi-m2-ultra.dtb \ sun8i-s3-lichee-zero-plus.dtb \ + sun8i-s3-pinecube.dtb \ sun8i-t3-cqa3t-bv3.dtb \ sun8i-v3s-licheepi-zero.dtb \ sun8i-v3s-licheepi-zero-dock.dtb \ @@ -1356,9 +1371,9 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \ mt8135-evbp1.dtb dtb-$(CONFIG_ARCH_MILBEAUT) += milbeaut-m10v-evb.dtb dtb-$(CONFIG_ARCH_MSTARV7) += \ - infinity-msc313-breadbee_crust.dtb \ - infinity3-msc313e-breadbee.dtb \ - mercury5-ssc8336n-midrived08.dtb + mstar-infinity-msc313-breadbee_crust.dtb \ + mstar-infinity3-msc313e-breadbee.dtb \ + mstar-mercury5-ssc8336n-midrived08.dtb dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-ast2500-evb.dtb \ @@ -1371,6 +1386,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-facebook-tiogapass.dtb \ aspeed-bmc-facebook-wedge40.dtb \ aspeed-bmc-facebook-wedge100.dtb \ + aspeed-bmc-facebook-wedge400.dtb \ aspeed-bmc-facebook-yamp.dtb \ aspeed-bmc-facebook-yosemitev2.dtb \ aspeed-bmc-ibm-rainier.dtb \ @@ -1381,6 +1397,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-microsoft-olympus.dtb \ aspeed-bmc-opp-lanyang.dtb \ aspeed-bmc-opp-mihawk.dtb \ + aspeed-bmc-opp-mowgli.dtb \ aspeed-bmc-opp-nicole.dtb \ aspeed-bmc-opp-palmetto.dtb \ aspeed-bmc-opp-romulus.dtb \ diff --git a/arch/arm/boot/dts/alpine.dtsi b/arch/arm/boot/dts/alpine.dtsi index d3036ea823d1..3b0675a1c460 100644 --- a/arch/arm/boot/dts/alpine.dtsi +++ b/arch/arm/boot/dts/alpine.dtsi @@ -91,7 +91,7 @@ }; /* Interrupt Controller */ - gic: gic@fb001000 { + gic: interrupt-controller@fb001000 { compatible = "arm,cortex-a15-gic"; #interrupt-cells = <3>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts index cd55f11260ea..0f078465297a 100644 --- a/arch/arm/boot/dts/am335x-lxm.dts +++ b/arch/arm/boot/dts/am335x-lxm.dts @@ -160,11 +160,15 @@ serial_config1: serial_config1@20 { compatible = "nxp,pca9539"; reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; }; serial_config2: serial_config2@21 { compatible = "nxp,pca9539"; reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; }; tps: tps@2d { diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi new file mode 100644 index 000000000000..98d8ed4ad967 --- /dev/null +++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi @@ -0,0 +1,427 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2020 MOXA Inc. - https://www.moxa.com/ + * + * Author: Johnson Chen <johnsonch.chen@moxa.com> + */ + +#include "am33xx.dtsi" + +/ { + + cpus { + cpu@0 { + cpu0-supply = <&vdd1_reg>; + }; + }; + + vbat: vbat-regulator { + compatible = "regulator-fixed"; + }; + + /* Power supply provides a fixed 3.3V @3A */ + vmmcsd_fixed: vmmcsd-regulator { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + buttons: push_button { + compatible = "gpio-keys"; + }; + +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&minipcie_pins>; + + minipcie_pins: pinmux_minipcie { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_pclk.gpio2_24 */ + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_ac_bias_en.gpio2_25 */ + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_vsync.gpio2_22 Power off PIN*/ + >; + }; + + push_button_pins: pinmux_push_button { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE7) /* mcasp0_ahcklx.gpio3_21 */ + >; + }; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) + >; + }; + + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart0_ctsn.i2c1_sda */ + AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart0_rtsn.i2c1_scl */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + >; + }; + + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT, MUX_MODE0) + >; + }; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_INPUT, MUX_MODE6) /* lcd_data14.uart5_ctsn */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT_PULLDOWN, MUX_MODE6) /* lcd_data15.uart5_rtsn */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_INPUT_PULLUP, MUX_MODE4) /* lcd_data9.uart5_rxd */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE4) /* lcd_data8.uart5_txd */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0) + + /* Slave 2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_crs_dv */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rxer */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_txen */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_td1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_td0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rd1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rd0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE1) /* rmii2_refclk */ + + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) + >; + }; + + mmc0_pins_default: pinmux_mmc0_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLUP, MUX_MODE7) /* mcasp0_aclkx.gpio3_14 */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7) /* mcasp0_aclkx.gpio3_18 */ + >; + }; + + mmc2_pins_default: pinmux_mmc2_pins { + pinctrl-single,pins = < + /* eMMC */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad12.mmc2_dat0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad13.mmc2_dat1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad14.mmc2_dat2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad15.mmc2_dat3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad8.mmc2_dat4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad9.mmc2_dat5 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad10.mmc2_dat6 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad11.mmc2_dat7 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_csn3.mmc2_cmd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_clk.mmc2_clk */ + >; + }; + + spi0_pins: pinmux_spi0 { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0) + >; + }; + +}; + +&uart0 { + /* Console */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; +}; + +&uart1 { + /* UART 1 setting */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; +}; + +&uart5 { + /* UART 2 setting */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + status = "okay"; + clock-frequency = <400000>; + + tps: tps@2d { + compatible = "ti,tps65910"; + reg = <0x2d>; + }; + + eeprom: eeprom@50 { + compatible = "atmel,24c16"; + pagesize = <16>; + reg = <0x50>; + }; + + rtc_wdt: rtc_wdt@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + status = "okay"; + clock-frequency = <400000>; + gpio_xten: gpio_xten@27 { + compatible = "nxp,pca9535"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x27>; + }; +}; + +&usb0 { + dr_mode = "host"; +}; + +&usb1 { + dr_mode = "host"; +}; + + +#include "tps65910.dtsi" +&tps { + vcc1-supply = <&vbat>; + vcc2-supply = <&vbat>; + vcc3-supply = <&vbat>; + vcc4-supply = <&vbat>; + vcc5-supply = <&vbat>; + vcc6-supply = <&vbat>; + vcc7-supply = <&vbat>; + vccio-supply = <&vbat>; + + regulators { + vrtc_reg: regulator@0 { + regulator-always-on; + }; + + vio_reg: regulator@1 { + regulator-always-on; + }; + + vdd1_reg: regulator@2 { + regulator-always-on; + }; + + vdd2_reg: regulator@3 { + regulator-always-on; + }; + + vdd3_reg: regulator@4 { + regulator-always-on; + }; + + vdig1_reg: regulator@5 { + regulator-always-on; + }; + + vdig2_reg: regulator@6 { + regulator-always-on; + }; + + vpll_reg: regulator@7 { + regulator-always-on; + }; + + vdac_reg: regulator@8 { + regulator-always-on; + }; + + vaux1_reg: regulator@9 { + regulator-always-on; + }; + + vaux2_reg: regulator@10 { + regulator-always-on; + }; + + vaux33_reg: regulator@11 { + regulator-always-on; + }; + + vmmc_reg: regulator@12 { + compatible = "regulator-fixed"; + regulator-name = "vmmc_reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; +}; + +/* Power */ +&vbat { + regulator-name = "vbat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; +}; + +&mac { + pinctrl-names = "default"; + pinctrl-0 = <&cpsw_default>; + dual_emac = <1>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&davinci_mdio_default>; + status = "okay"; + + ethphy0: ethernet-phy@4 { + reg = <4>; + }; + + ethphy1: ethernet-phy@5 { + reg = <5>; + }; +}; + +&cpsw_emac0 { + status = "okay"; + phy-handle = <ðphy0>; + phy-mode = "rmii"; + dual_emac_res_vlan = <1>; +}; + +&cpsw_emac1 { + status = "okay"; + phy-handle = <ðphy1>; + phy-mode = "rmii"; + dual_emac_res_vlan = <2>; +}; + +&sham { + status = "okay"; +}; + +&aes { + status = "okay"; +}; + +&gpio0 { + ti,no-reset-on-init; +}; + +&mmc1 { + pinctrl-names = "default"; + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <4>; + pinctrl-0 = <&mmc0_pins_default>; + cd-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&mmc3 { + dmas = <&edma_xbar 12 0 1 + &edma_xbar 13 0 2>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <8>; + pinctrl-0 = <&mmc2_pins_default>; + ti,non-removable; + status = "okay"; +}; + +&buttons { + pinctrl-names = "default"; + pinctrl-0 = <&push_button_pins>; + #address-cells = <1>; + #size-cells = <0>; + + button@0 { + label = "push_button"; + linux,code = <0x100>; + gpios = <&gpio3 21 GPIO_ACTIVE_LOW>; + }; +}; + +/* SPI Busses */ +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + + m25p80@0 { + compatible = "mx25l6405d"; + spi-max-frequency = <40000000>; + + reg = <0>; + spi-cpol; + spi-cpha; + #address-cells = <1>; + #size-cells = <1>; + + /* reg : The partition's offset and size within the mtd bank. */ + partitions@0 { + label = "MLO"; + reg = <0x0 0x80000>; + }; + + partitions@1 { + label = "U-Boot"; + reg = <0x80000 0x100000>; + }; + + partitions@2 { + label = "U-Boot Env"; + reg = <0x180000 0x20000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts index f03e72cada41..0c7949d21bd9 100644 --- a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts +++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts @@ -4,39 +4,19 @@ * * Author: SZ Lin (林上智) <sz.lin@moxa.com> */ - /dts-v1/; -#include "am33xx.dtsi" +#include "am335x-moxa-uc-8100-common.dtsi" / { model = "Moxa UC-8100-ME-T"; compatible = "moxa,uc-8100-me-t", "ti,am33xx"; - cpus { - cpu@0 { - cpu0-supply = <&vdd1_reg>; - }; - }; - memory { device_type = "memory"; reg = <0x80000000 0x20000000>; /* 512 MB */ }; - vbat: vbat-regulator { - compatible = "regulator-fixed"; - }; - - /* Power supply provides a fixed 3.3V @3A */ - vmmcsd_fixed: vmmcsd-regulator { - compatible = "regulator-fixed"; - regulator-name = "vmmcsd_fixed"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - }; - leds { compatible = "gpio-leds"; led1 { @@ -88,237 +68,17 @@ default-state = "off"; }; }; - - buttons: push_button { - compatible = "gpio-keys"; - }; - -}; - -&am33xx_pinmux { - pinctrl-names = "default"; - pinctrl-0 = <&minipcie_pins>; - - minipcie_pins: pinmux_minipcie { - pinctrl-single,pins = < - AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_pclk.gpio2_24 */ - AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_ac_bias_en.gpio2_25 */ - AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_vsync.gpio2_22 Power off PIN*/ - >; - }; - - push_button_pins: pinmux_push_button { - pinctrl-single,pins = < - AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE7) /* mcasp0_ahcklx.gpio3_21 */ - >; - }; - - i2c0_pins: pinmux_i2c0_pins { - pinctrl-single,pins = < - AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) - >; - }; - - - i2c1_pins: pinmux_i2c1_pins { - pinctrl-single,pins = < - AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart0_ctsn.i2c1_sda */ - AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart0_rtsn.i2c1_scl */ - >; - }; - - uart0_pins: pinmux_uart0_pins { - pinctrl-single,pins = < - AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) - >; - }; - - uart1_pins: pinmux_uart1_pins { - pinctrl-single,pins = < - AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT, MUX_MODE0) - >; - }; - - uart2_pins: pinmux_uart2_pins { - pinctrl-single,pins = < - AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_INPUT, MUX_MODE6) /* lcd_data14.uart5_ctsn */ - AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT_PULLDOWN, MUX_MODE6) /* lcd_data15.uart5_rtsn */ - AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_INPUT_PULLUP, MUX_MODE4) /* lcd_data9.uart5_rxd */ - AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE4) /* lcd_data8.uart5_txd */ - >; - }; - - cpsw_default: cpsw_default { - pinctrl-single,pins = < - /* Slave 1 */ - AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1) - AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE1) - AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1) - AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1) - AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1) - AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE1) - AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE1) - AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0) - - /* Slave 2 */ - AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_crs_dv */ - AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rxer */ - AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_txen */ - AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_td1 */ - AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_td0 */ - AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rd1 */ - AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rd0 */ - AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE1) /* rmii2_refclk */ - - >; - }; - - davinci_mdio_default: davinci_mdio_default { - pinctrl-single,pins = < - /* MDIO */ - AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) - >; - }; - - mmc0_pins_default: pinmux_mmc0_pins { - pinctrl-single,pins = < - AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLUP, MUX_MODE7) /* mcasp0_aclkx.gpio3_14 */ - AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7) /* mcasp0_aclkx.gpio3_18 */ - >; - }; - - mmc2_pins_default: pinmux_mmc2_pins { - pinctrl-single,pins = < - /* eMMC */ - AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad12.mmc2_dat0 */ - AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad13.mmc2_dat1 */ - AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad14.mmc2_dat2 */ - AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad15.mmc2_dat3 */ - AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad8.mmc2_dat4 */ - AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad9.mmc2_dat5 */ - AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad10.mmc2_dat6 */ - AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad11.mmc2_dat7 */ - AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_csn3.mmc2_cmd */ - AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_clk.mmc2_clk */ - >; - }; - - spi0_pins: pinmux_spi0 { - pinctrl-single,pins = < - AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0) - >; - }; - -}; - -&uart0 { - /* Console */ - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; -}; - -&uart1 { - /* UART 1 setting */ - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>; -}; - -&uart5 { - /* UART 2 setting */ - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins>; }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; - - status = "okay"; - clock-frequency = <400000>; - tpm: tpm@20 { compatible = "infineon,slb9645tt"; reg = <0x20>; }; - - tps: tps@2d { - compatible = "ti,tps65910"; - reg = <0x2d>; - }; - - eeprom: eeprom@50 { - compatible = "atmel,24c16"; - pagesize = <16>; - reg = <0x50>; - }; - - rtc_wdt: rtc_wdt@68 { - compatible = "dallas,ds1374"; - reg = <0x68>; - }; }; -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - - status = "okay"; - clock-frequency = <400000>; - gpio_xten: gpio_xten@27 { - compatible = "nxp,pca9535"; - gpio-controller; - #gpio-cells = <2>; - reg = <0x27>; - }; -}; - -&usb0 { - dr_mode = "host"; -}; - -&usb1 { - dr_mode = "host"; -}; - -#include "tps65910.dtsi" - &tps { - vcc1-supply = <&vbat>; - vcc2-supply = <&vbat>; - vcc3-supply = <&vbat>; - vcc4-supply = <&vbat>; - vcc5-supply = <&vbat>; - vcc6-supply = <&vbat>; - vcc7-supply = <&vbat>; - vccio-supply = <&vbat>; - regulators { - vrtc_reg: regulator@0 { - regulator-always-on; - }; - - vio_reg: regulator@1 { - regulator-always-on; - }; - vdd1_reg: regulator@2 { /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ regulator-name = "vdd_mpu"; @@ -336,168 +96,6 @@ regulator-boot-on; regulator-always-on; }; - - vdd3_reg: regulator@4 { - regulator-always-on; - }; - - vdig1_reg: regulator@5 { - regulator-always-on; - }; - - vdig2_reg: regulator@6 { - regulator-always-on; - }; - - vpll_reg: regulator@7 { - regulator-always-on; - }; - - vdac_reg: regulator@8 { - regulator-always-on; - }; - - vaux1_reg: regulator@9 { - regulator-always-on; - }; - - vaux2_reg: regulator@10 { - regulator-always-on; - }; - - vaux33_reg: regulator@11 { - regulator-always-on; - }; - - vmmc_reg: regulator@12 { - compatible = "regulator-fixed"; - regulator-name = "vmmc_reg"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - }; -}; - -/* Power */ -&vbat { - regulator-name = "vbat"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; -}; - -&mac { - pinctrl-names = "default"; - pinctrl-0 = <&cpsw_default>; - dual_emac = <1>; - status = "okay"; -}; - -&davinci_mdio { - pinctrl-names = "default"; - pinctrl-0 = <&davinci_mdio_default>; - status = "okay"; - - ethphy0: ethernet-phy@4 { - reg = <4>; - }; - - ethphy1: ethernet-phy@5 { - reg = <5>; - }; -}; - -&cpsw_emac0 { - status = "okay"; - phy-handle = <ðphy0>; - phy-mode = "rmii"; - dual_emac_res_vlan = <1>; -}; - -&cpsw_emac1 { - status = "okay"; - phy-handle = <ðphy1>; - phy-mode = "rmii"; - dual_emac_res_vlan = <2>; -}; - -&sham { - status = "okay"; -}; - -&aes { - status = "okay"; -}; - -&gpio0 { - ti,no-reset-on-init; -}; - -&mmc1 { - pinctrl-names = "default"; - vmmc-supply = <&vmmcsd_fixed>; - bus-width = <4>; - pinctrl-0 = <&mmc0_pins_default>; - cd-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; - wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; - status = "okay"; -}; - -&mmc3 { - dmas = <&edma_xbar 12 0 1 - &edma_xbar 13 0 2>; - dma-names = "tx", "rx"; - pinctrl-names = "default"; - vmmc-supply = <&vmmcsd_fixed>; - bus-width = <8>; - pinctrl-0 = <&mmc2_pins_default>; - non-removable; - status = "okay"; -}; - -&buttons { - pinctrl-names = "default"; - pinctrl-0 = <&push_button_pins>; - #address-cells = <1>; - #size-cells = <0>; - - button@0 { - label = "push_button"; - linux,code = <0x100>; - gpios = <&gpio3 21 GPIO_ACTIVE_LOW>; }; }; -/* SPI Busses */ -&spi0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins>; - - m25p80@0 { - compatible = "mx25l6405d"; - spi-max-frequency = <40000000>; - - reg = <0>; - spi-cpol; - spi-cpha; - #address-cells = <1>; - #size-cells = <1>; - - /* reg : The partition's offset and size within the mtd bank. */ - partitions@0 { - label = "MLO"; - reg = <0x0 0x80000>; - }; - - partitions@1 { - label = "U-Boot"; - reg = <0x80000 0x100000>; - }; - - partitions@2 { - label = "U-Boot Env"; - reg = <0x180000 0x20000>; - }; - }; -}; diff --git a/arch/arm/boot/dts/am335x-sbc-t335.dts b/arch/arm/boot/dts/am335x-sbc-t335.dts index a3f6bc4072d9..81e4453687ba 100644 --- a/arch/arm/boot/dts/am335x-sbc-t335.dts +++ b/arch/arm/boot/dts/am335x-sbc-t335.dts @@ -155,13 +155,13 @@ gpio-controller; #gpio-cells = <2>; reg = <0x26>; - dvi_ena { + dvi-ena-hog { gpio-hog; gpios = <13 GPIO_ACTIVE_HIGH>; output-high; line-name = "dvi-enable"; }; - lcd_ena { + lcd-ena-hog { gpio-hog; gpios = <11 GPIO_ACTIVE_HIGH>; output-high; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 0fab080d61ef..4c2298024137 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -172,7 +172,7 @@ * for the moment, just use a fake OCP bus entry to represent * the whole bus hierarchy. */ - ocp { + ocp: ocp { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/am3517-evm-ui.dtsi b/arch/arm/boot/dts/am3517-evm-ui.dtsi index 250c40da2535..7d8f32bf70db 100644 --- a/arch/arm/boot/dts/am3517-evm-ui.dtsi +++ b/arch/arm/boot/dts/am3517-evm-ui.dtsi @@ -183,14 +183,14 @@ }; &mcbsp1 { - status = "ok"; + status = "okay"; #sound-dai-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&mcbsp1_pins>; }; &mcbsp2 { - status = "ok"; + status = "okay"; #sound-dai-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&mcbsp2_pins>; diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts index 04f20e7680b1..0d2fac98ce7d 100644 --- a/arch/arm/boot/dts/am3517-evm.dts +++ b/arch/arm/boot/dts/am3517-evm.dts @@ -176,7 +176,7 @@ }; &dss { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dss_dpi_pins>; diff --git a/arch/arm/boot/dts/am3874-iceboard.dts b/arch/arm/boot/dts/am3874-iceboard.dts index 1bb57019d082..9423e9feaa10 100644 --- a/arch/arm/boot/dts/am3874-iceboard.dts +++ b/arch/arm/boot/dts/am3874-iceboard.dts @@ -195,7 +195,7 @@ "FMCA_PG_C2M", "FMCA_PRSNT_M2C_L", "FMCA_CLK_DIR", "SFP_LOS", "FMCB_EN_12V0", "FMCB_EN_3V3", "FMCB_EN_VADJ", "FMCB_PG_M2C", "FMCB_PG_C2M", "FMCB_PRSNT_M2C_L", "FMCB_CLK_DIR", "SFP_ModPrsL"; - reset_gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; }; u42: pca9575@21 { @@ -208,7 +208,7 @@ "QSFPA_LPMode", "QSFPB_ModPrsL", "QSFPB_IntL", "QSFPB_ResetL", "SFP_TxFault", "SFP_TxDisable", "SFP_RS0", "SFP_RS1", "QSFPB_ModSelL", "QSFPB_LPMode", "SEL_SFP", "ARM_MR"; - reset_gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; }; u48: pca9575@22 { @@ -227,7 +227,7 @@ "GP_SW5", "GP_SW6", "GP_SW7", "GP_SW8", "GP_LED8", "GP_LED7", "GP_LED6", "GP_LED5", "GP_LED4", "GP_LED3", "GP_LED2", "GP_LED1"; - reset_gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; }; u59: pca9575@23 { @@ -240,7 +240,7 @@ "GTX1V8PowerFault", "PHYAPowerFault", "PHYBPowerFault", "ArmPowerFault", "BP_SLOW_GPIO0", "BP_SLOW_GPIO1", "BP_SLOW_GPIO2", "BP_SLOW_GPIO3", "BP_SLOW_GPIO4", "BP_SLOW_GPIO5", "__unused_u59_p16", "__unused_u59_p17"; - reset_gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; }; tmp100@48 { compatible = "ti,tmp100"; reg = <0x48>; }; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 8d47913e2129..878406b120be 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -35,8 +35,8 @@ serial3 = &uart3; serial4 = &uart4; serial5 = &uart5; - ethernet0 = &cpsw_emac0; - ethernet1 = &cpsw_emac1; + ethernet0 = &cpsw_port1; + ethernet1 = &cpsw_port2; spi0 = &qspi; }; diff --git a/arch/arm/boot/dts/am437x-cm-t43.dts b/arch/arm/boot/dts/am437x-cm-t43.dts index a6b4fca8626a..a83f46ed0c9a 100644 --- a/arch/arm/boot/dts/am437x-cm-t43.dts +++ b/arch/arm/boot/dts/am437x-cm-t43.dts @@ -325,17 +325,15 @@ }; }; -&mac { +&mac_sw { pinctrl-names = "default"; pinctrl-0 = <&cpsw_default>; - dual_emac = <1>; status = "okay"; }; -&davinci_mdio { +&davinci_mdio_sw { pinctrl-names = "default"; pinctrl-0 = <&davinci_mdio_default>; - status = "okay"; ethphy0: ethernet-phy@0 { reg = <0>; @@ -346,16 +344,16 @@ }; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <ðphy0>; phy-mode = "rgmii-txid"; - dual_emac_res_vlan = <1>; + ti,dual-emac-pvid = <1>; }; -&cpsw_emac1 { +&cpsw_port2 { phy-handle = <ðphy1>; phy-mode = "rgmii-txid"; - dual_emac_res_vlan = <2>; + ti,dual-emac-pvid = <2>; }; &dwc3_1 { diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index b28e5c8cd02a..6e4d05d649e9 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -906,28 +906,31 @@ status = "okay"; }; -&mac { - slaves = <1>; +&mac_sw { pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; status = "okay"; }; -&davinci_mdio { +&davinci_mdio_sw { pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; - status = "okay"; ethphy0: ethernet-phy@0 { reg = <0>; }; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <ðphy0>; phy-mode = "rgmii-rxid"; + ti,dual-emac-pvid = <1>; +}; + +&cpsw_port2 { + status = "disabled"; }; &elm { @@ -1024,7 +1027,7 @@ }; &dss { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dss_pins>; diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts index 8b986c45f09d..2dc525512266 100644 --- a/arch/arm/boot/dts/am437x-idk-evm.dts +++ b/arch/arm/boot/dts/am437x-idk-evm.dts @@ -483,28 +483,31 @@ }; }; -&mac { - slaves = <1>; +&mac_sw { pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; status = "okay"; }; -&davinci_mdio { +&davinci_mdio_sw { pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; - status = "okay"; ethphy0: ethernet-phy@0 { reg = <0>; }; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <ðphy0>; phy-mode = "rgmii-rxid"; + ti,dual-emac-pvid = <1>; +}; + +&cpsw_port2 { + status = "disabled"; }; &rtc { diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi index 8a67bb29e3b7..c220dc3c4e0f 100644 --- a/arch/arm/boot/dts/am437x-l4.dtsi +++ b/arch/arm/boot/dts/am437x-l4.dtsi @@ -520,54 +520,57 @@ #size-cells = <1>; ranges = <0x0 0x100000 0x8000>; - mac: ethernet@0 { - compatible = "ti,am4372-cpsw","ti,cpsw"; - reg = <0x0 0x800 - 0x1200 0x100>; + mac_sw: switch@0 { + compatible = "ti,am4372-cpsw","ti,cpsw-switch"; + reg = <0x0 0x4000>; + ranges = <0 0 0x4000>; + clocks = <&cpsw_125mhz_gclk>, <&dpll_clksel_mac_clk>; + clock-names = "fck", "50mclk"; + assigned-clocks = <&dpll_clksel_mac_clk>; + assigned-clock-rates = <50000000>; + #address-cells = <1>; + #size-cells = <1>; + syscon = <&scm_conf>; + status = "disabled"; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <1>; - clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>, - <&dpll_clksel_mac_clk>; - clock-names = "fck", "cpts", "50mclk"; - assigned-clocks = <&dpll_clksel_mac_clk>; - assigned-clock-rates = <50000000>; - status = "disabled"; - cpdma_channels = <8>; - ale_entries = <1024>; - bd_ram_size = <0x2000>; - mac_control = <0x20>; - slaves = <2>; - active_slave = <0>; - cpts_clock_mult = <0x80000000>; - cpts_clock_shift = <29>; - ranges = <0 0 0x8000>; - syscon = <&scm_conf>; + interrupt-names = "rx_thresh", "rx", "tx", "misc"; - davinci_mdio: mdio@1000 { - compatible = "ti,am4372-mdio","ti,cpsw-mdio","ti,davinci_mdio"; - reg = <0x1000 0x100>; - clocks = <&cpsw_125mhz_clkctrl AM4_CPSW_125MHZ_CPGMAC0_CLKCTRL 0>; - clock-names = "fck"; + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - bus_freq = <1000000>; - status = "disabled"; + + cpsw_port1: port@1 { + reg = <1>; + label = "port1"; + mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 1 0>; + }; + + cpsw_port2: port@2 { + reg = <2>; + label = "port2"; + mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 2 0>; + }; }; - cpsw_emac0: slave@200 { - /* Filled in by U-Boot */ - mac-address = [ 00 00 00 00 00 00 ]; - phys = <&phy_gmii_sel 1 0>; + davinci_mdio_sw: mdio@1000 { + compatible = "ti,am4372-mdio", "ti,cpsw-mdio","ti,davinci_mdio"; + clocks = <&cpsw_125mhz_gclk>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <0>; + bus_freq = <1000000>; + reg = <0x1000 0x100>; }; - cpsw_emac1: slave@300 { - /* Filled in by U-Boot */ - mac-address = [ 00 00 00 00 00 00 ]; - phys = <&phy_gmii_sel 2 0>; + cpts { + clocks = <&cpsw_cpts_rft_clk>; + clock-names = "cpts"; }; }; }; diff --git a/arch/arm/boot/dts/am437x-sbc-t43.dts b/arch/arm/boot/dts/am437x-sbc-t43.dts index 94cf07ea27f7..8ea3780f939d 100644 --- a/arch/arm/boot/dts/am437x-sbc-t43.dts +++ b/arch/arm/boot/dts/am437x-sbc-t43.dts @@ -136,7 +136,7 @@ }; &dss { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dss_pinctrl_default>; diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 5fffdce853b1..496ed34f7755 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -792,19 +792,17 @@ }; }; -&mac { +&mac_sw { pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; - dual_emac = <1>; status = "okay"; }; -&davinci_mdio { +&davinci_mdio_sw { pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; - status = "okay"; ethphy0: ethernet-phy@4 { reg = <4>; @@ -815,16 +813,16 @@ }; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <ðphy0>; phy-mode = "rgmii-rxid"; - dual_emac_res_vlan = <1>; + ti,dual-emac-pvid = <1>; }; -&cpsw_emac1 { +&cpsw_port2 { phy-handle = <ðphy1>; phy-mode = "rgmii-rxid"; - dual_emac_res_vlan = <2>; + ti,dual-emac-pvid = <2>; }; &elm { diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 7f3faa36a5e4..f517d1e843cf 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -550,29 +550,32 @@ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; }; -&mac { +&mac_sw { pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; status = "okay"; - slaves = <1>; }; -&davinci_mdio { +&davinci_mdio_sw { pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; - status = "okay"; ethphy0: ethernet-phy@16 { reg = <16>; }; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <ðphy0>; phy-mode = "rmii"; phys = <&phy_gmii_sel 1 1>; + ti,dual-emac-pvid = <1>; +}; + +&cpsw_port2 { + status = "disabled"; }; &i2c0 { @@ -952,7 +955,7 @@ }; &dss { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dss_pins>; diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts index 391a92e24472..e81078c2d00d 100644 --- a/arch/arm/boot/dts/am571x-idk.dts +++ b/arch/arm/boot/dts/am571x-idk.dts @@ -208,30 +208,3 @@ pinctrl-1 = <&mmc2_pins_hs>; pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>; }; - -&mac_sw { - pinctrl-names = "default", "sleep"; - status = "okay"; -}; - -&cpsw_port1 { - phy-handle = <ðphy0_sw>; - phy-mode = "rgmii-rxid"; - ti,dual-emac-pvid = <1>; -}; - -&cpsw_port2 { - phy-handle = <ðphy1_sw>; - phy-mode = "rgmii-rxid"; - ti,dual-emac-pvid = <2>; -}; - -&davinci_mdio_sw { - ethphy0_sw: ethernet-phy@0 { - reg = <0>; - }; - - ethphy1_sw: ethernet-phy@1 { - reg = <1>; - }; -}; diff --git a/arch/arm/boot/dts/am5729-beagleboneai.dts b/arch/arm/boot/dts/am5729-beagleboneai.dts index e9c7f44126e7..149cfafb90bf 100644 --- a/arch/arm/boot/dts/am5729-beagleboneai.dts +++ b/arch/arm/boot/dts/am5729-beagleboneai.dts @@ -488,25 +488,29 @@ status = "okay"; }; -&davinci_mdio { +&davinci_mdio_sw { reset-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; reset-delay-us = <2>; - phy0: ethernet-phy@1 { + phy0: ethernet-phy@4 { reg = <4>; eee-broken-100tx; eee-broken-1000t; }; }; -&mac { - slaves = <1>; +&mac_sw { status = "okay"; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <&phy0>; phy-mode = "rgmii-rxid"; + ti,dual-emac-pvid = <1>; +}; + +&cpsw_port2 { + status = "disabled"; }; &ocp { diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts index 1a3af4b54308..6504265f3f7e 100644 --- a/arch/arm/boot/dts/am572x-idk.dts +++ b/arch/arm/boot/dts/am572x-idk.dts @@ -27,8 +27,3 @@ pinctrl-1 = <&mmc2_pins_hs>; pinctrl-2 = <&mmc2_pins_ddr_rev20>; }; - -&mac { - status = "okay"; - dual_emac; -}; diff --git a/arch/arm/boot/dts/am574x-idk.dts b/arch/arm/boot/dts/am574x-idk.dts index c9275d0c62cf..37758761cd88 100644 --- a/arch/arm/boot/dts/am574x-idk.dts +++ b/arch/arm/boot/dts/am574x-idk.dts @@ -36,11 +36,6 @@ pinctrl-2 = <&mmc2_pins_default>; }; -&mac { - status = "okay"; - dual_emac; -}; - &m_can0 { status = "disabled"; }; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi index b3a0206ebd6c..6b82ecf803c5 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi +++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi @@ -451,7 +451,7 @@ <&dra7_pmx_core 0x3f8>; }; -&davinci_mdio { +&davinci_mdio_sw { phy0: ethernet-phy@1 { reg = <1>; }; @@ -461,21 +461,20 @@ }; }; -&mac { +&mac_sw { status = "okay"; - dual_emac; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <&phy0>; phy-mode = "rgmii-rxid"; - dual_emac_res_vlan = <1>; + ti,dual-emac-pvid = <1>; }; -&cpsw_emac1 { +&cpsw_port2 { phy-handle = <&phy1>; phy-mode = "rgmii-rxid"; - dual_emac_res_vlan = <2>; + ti,dual-emac-pvid = <2>; }; &mmc1 { @@ -582,13 +581,13 @@ }; &dss { - status = "ok"; + status = "okay"; vdda_video-supply = <&ldoln_reg>; }; &hdmi { - status = "ok"; + status = "okay"; vdda-supply = <&ldo4_reg>; port { @@ -599,7 +598,7 @@ }; &pcie1_rc { - status = "ok"; + status = "okay"; gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts index 34ca761aeded..0d5fe2bfb683 100644 --- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts +++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts @@ -546,27 +546,26 @@ }; }; -&mac { +&mac_sw { status = "okay"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_pins_default>; pinctrl-1 = <&cpsw_pins_sleep>; - dual_emac; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <ðphy0>; phy-mode = "rgmii-txid"; - dual_emac_res_vlan = <0>; + ti,dual-emac-pvid = <1>; }; -&cpsw_emac1 { +&cpsw_port2 { phy-handle = <ðphy1>; phy-mode = "rgmii-txid"; - dual_emac_res_vlan = <1>; + ti,dual-emac-pvid = <2>; }; -&davinci_mdio { +&davinci_mdio_sw { pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_pins_default>; pinctrl-1 = <&davinci_mdio_pins_sleep>; diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi index 1c77006cccd1..9fcb8944aa3e 100644 --- a/arch/arm/boot/dts/am57xx-idk-common.dtsi +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -448,19 +448,23 @@ ext-clk-src; }; -&cpsw_emac0 { +&mac_sw { + status = "okay"; +}; + +&cpsw_port1 { phy-handle = <ðphy0>; phy-mode = "rgmii-rxid"; - dual_emac_res_vlan = <1>; + ti,dual-emac-pvid = <1>; }; -&cpsw_emac1 { +&cpsw_port2 { phy-handle = <ðphy1>; phy-mode = "rgmii-rxid"; - dual_emac_res_vlan = <2>; + ti,dual-emac-pvid = <2>; }; -&davinci_mdio { +&davinci_mdio_sw { ethphy0: ethernet-phy@0 { reg = <0>; }; diff --git a/arch/arm/boot/dts/am57xx-sbc-am57x.dts b/arch/arm/boot/dts/am57xx-sbc-am57x.dts index ce5bf1d92eab..beef63e8a005 100644 --- a/arch/arm/boot/dts/am57xx-sbc-am57x.dts +++ b/arch/arm/boot/dts/am57xx-sbc-am57x.dts @@ -120,7 +120,7 @@ }; &dss { - status = "ok"; + status = "okay"; vdda_video-supply = <&ldoln_reg>; @@ -148,7 +148,7 @@ }; &hdmi { - status = "ok"; + status = "okay"; vdda-supply = <&ldo4_reg>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts index c36d28c295d6..7da718abbd85 100644 --- a/arch/arm/boot/dts/animeo_ip.dts +++ b/arch/arm/boot/dts/animeo_ip.dts @@ -26,7 +26,7 @@ stdout-path = &usart2; }; - memory { + memory@20000000 { reg = <0x20000000 0x4000000>; }; @@ -81,6 +81,7 @@ pinctrl-0 = <&pinctrl_mmc0_clk &pinctrl_mmc0_slot1_cmd_dat0 &pinctrl_mmc0_slot1_dat1_3>; + pinctrl-names = "default"; status = "okay"; slot@1 { diff --git a/arch/arm/boot/dts/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm-realview-eb.dtsi index fe0207b88053..a534a8e444d9 100644 --- a/arch/arm/boot/dts/arm-realview-eb.dtsi +++ b/arch/arm/boot/dts/arm-realview-eb.dtsi @@ -390,7 +390,7 @@ compatible = "arm,sp805", "arm,primecell"; reg = <0x10010000 0x1000>; clocks = <&wdogclk>, <&pclk>; - clock-names = "wdogclk", "apb_pclk"; + clock-names = "wdog_clk", "apb_pclk"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm-realview-pb11mp.dts index 9748e0fe800f..0c7dabef4a5f 100644 --- a/arch/arm/boot/dts/arm-realview-pb11mp.dts +++ b/arch/arm/boot/dts/arm-realview-pb11mp.dts @@ -546,7 +546,7 @@ interrupt-parent = <&intc_pb11mp>; interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>; clocks = <&wdogclk>, <&pclk>; - clock-names = "wdogclk", "apb_pclk"; + clock-names = "wdog_clk", "apb_pclk"; status = "disabled"; }; @@ -556,7 +556,7 @@ interrupt-parent = <&intc_pb11mp>; interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>; clocks = <&wdogclk>, <&pclk>; - clock-names = "wdogclk", "apb_pclk"; + clock-names = "wdog_clk", "apb_pclk"; }; timer01: timer@10011000 { @@ -568,8 +568,8 @@ clocks = <&sp810_syscon 0>, <&sp810_syscon 1>, <&pclk>; - clock-names = "timerclk0", - "timerclk1", + clock-names = "timer0clk", + "timer1clk", "apb_pclk"; }; @@ -582,8 +582,8 @@ clocks = <&sp810_syscon 2>, <&sp810_syscon 3>, <&pclk>; - clock-names = "timerclk2", - "timerclk3", + clock-names = "timer0clk", + "timer1clk", "apb_pclk"; }; @@ -645,16 +645,16 @@ timer45: timer@10018000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x10018000 0x1000>; - clocks = <&timclk>, <&pclk>; - clock-names = "timer", "apb_pclk"; + clocks = <&timclk>, <&timclk>, <&pclk>; + clock-names = "timer0clk", "timer1clk", "apb_pclk"; status = "disabled"; }; timer67: timer@10019000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x10019000 0x1000>; - clocks = <&timclk>, <&pclk>; - clock-names = "timer", "apb_pclk"; + clocks = <&timclk>, <&timclk>, <&pclk>; + clock-names = "timer0clk", "timer1clk", "apb_pclk"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm-realview-pbx.dtsi index f61bd59ae5ba..ac95667ed781 100644 --- a/arch/arm/boot/dts/arm-realview-pbx.dtsi +++ b/arch/arm/boot/dts/arm-realview-pbx.dtsi @@ -381,7 +381,7 @@ compatible = "arm,sp805", "arm,primecell"; reg = <0x1000f000 0x1000>; clocks = <&wdogclk>, <&pclk>; - clock-names = "wdogclk", "apb_pclk"; + clock-names = "wdog_clk", "apb_pclk"; status = "disabled"; }; @@ -389,7 +389,7 @@ compatible = "arm,sp805", "arm,primecell"; reg = <0x10010000 0x1000>; clocks = <&wdogclk>, <&pclk>; - clock-names = "wdogclk", "apb_pclk"; + clock-names = "wdog_clk", "apb_pclk"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts index 7bc7df7ed428..2fb8b147f489 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts @@ -1571,3 +1571,20 @@ &sdhci1 { status = "disabled"; }; + +&fmc_flash0 { +#include "facebook-bmc-flash-layout.dtsi" +}; + +&fmc_flash1 { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + flash1@0 { + reg = <0x0 0x2000000>; + label = "flash1"; + }; + }; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts index 88ce4ff9f47e..c34741dbd268 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts @@ -88,17 +88,60 @@ */ &fmc_flash0 { partitions { - data0@1c00000 { - reg = <0x1c00000 0x2400000>; + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + /* + * u-boot partition: 384KB. + */ + u-boot@0 { + reg = <0x0 0x60000>; + label = "u-boot"; }; + + /* + * u-boot environment variables: 128KB. + */ + u-boot-env@60000 { + reg = <0x60000 0x20000>; + label = "env"; + }; + + /* + * FIT image: 59.5 MB. + */ + fit@80000 { + reg = <0x80000 0x3b80000>; + label = "fit"; + }; + + /* + * "data0" partition (4MB) is reserved for persistent + * data store. + */ + data0@3800000 { + reg = <0x3c00000 0x400000>; + label = "data0"; + }; + + /* + * "flash0" partition (covering the entire flash) is + * explicitly created to avoid breaking legacy applications. + */ flash0@0 { reg = <0x0 0x4000000>; + label = "flash0"; }; }; }; &fmc_flash1 { partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + flash1@0 { reg = <0x0 0x4000000>; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts index 8ac23ff6b09e..8c426ba2f8ab 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts @@ -48,7 +48,7 @@ flash@0 { status = "okay"; m25p,fast-read; - label = "fmc0"; + label = "spi0.0"; #include "facebook-bmc-flash-layout.dtsi" }; }; @@ -71,7 +71,8 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_txd4_default - &pinctrl_rxd4_default>; + &pinctrl_rxd4_default + &pinctrl_ndts4_default>; }; &uart5 { diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts new file mode 100644 index 000000000000..ad1fcad3676c --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts @@ -0,0 +1,420 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2019 Facebook Inc. +/dts-v1/; + +#include <dt-bindings/gpio/aspeed-gpio.h> +#include "ast2500-facebook-netbmc-common.dtsi" + +/ { + model = "Facebook Wedge 400 BMC"; + compatible = "facebook,wedge400-bmc", "aspeed,ast2500"; + + aliases { + /* + * PCA9548 (2-0070) provides 8 channels connecting to + * SCM (System Controller Module). + */ + i2c16 = &imux16; + i2c17 = &imux17; + i2c18 = &imux18; + i2c19 = &imux19; + i2c20 = &imux20; + i2c21 = &imux21; + i2c22 = &imux22; + i2c23 = &imux23; + + /* + * PCA9548 (8-0070) provides 8 channels connecting to + * SMB (Switch Main Board). + */ + i2c24 = &imux24; + i2c25 = &imux25; + i2c26 = &imux26; + i2c27 = &imux27; + i2c28 = &imux28; + i2c29 = &imux29; + i2c30 = &imux30; + i2c31 = &imux31; + + /* + * PCA9548 (11-0076) provides 8 channels connecting to + * FCM (Fan Controller Module). + */ + i2c32 = &imux32; + i2c33 = &imux33; + i2c34 = &imux34; + i2c35 = &imux35; + i2c36 = &imux36; + i2c37 = &imux37; + i2c38 = &imux38; + i2c39 = &imux39; + + spi2 = &spi_gpio; + }; + + chosen { + stdout-path = &uart1; + bootargs = "console=ttyS0,9600n8 root=/dev/ram rw"; + }; + + ast-adc-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>; + }; + + /* + * GPIO-based SPI Master is required to access SPI TPM, because + * full-duplex SPI transactions are not supported by ASPEED SPI + * Controllers. + */ + spi_gpio: spi-gpio { + status = "okay"; + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + cs-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_LOW>; + gpio-sck = <&gpio ASPEED_GPIO(R, 3) GPIO_ACTIVE_HIGH>; + gpio-mosi = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_HIGH>; + gpio-miso = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; + + tpmdev@0 { + compatible = "tcg,tpm_tis-spi"; + spi-max-frequency = <33000000>; + reg = <0>; + }; + }; +}; + +/* + * Both firmware flashes are 128MB on Wedge400 BMC. + */ +&fmc_flash0 { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + /* + * u-boot partition: 384KB. + */ + u-boot@0 { + reg = <0x0 0x60000>; + label = "u-boot"; + }; + + /* + * u-boot environment variables: 128KB. + */ + u-boot-env@60000 { + reg = <0x60000 0x20000>; + label = "env"; + }; + + /* + * FIT image: 123.5 MB. + */ + fit@80000 { + reg = <0x80000 0x7b80000>; + label = "fit"; + }; + + /* + * "data0" partition (4MB) is reserved for persistent + * data store. + */ + data0@3800000 { + reg = <0x7c00000 0x800000>; + label = "data0"; + }; + + /* + * "flash0" partition (covering the entire flash) is + * explicitly created to avoid breaking legacy applications. + */ + flash0@0 { + reg = <0x0 0x8000000>; + label = "flash0"; + }; + }; +}; + +&fmc_flash1 { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + flash1@0 { + reg = <0x0 0x8000000>; + label = "flash1"; + }; + }; +}; + +&uart2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default + &pinctrl_rxd2_default>; +}; + +&uart4 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd4_default + &pinctrl_rxd4_default>; +}; + +/* + * I2C bus #0 is multi-master environment dedicated for BMC and Bridge IC + * communication. + */ +&i2c0 { + status = "okay"; + multi-master; + bus-frequency = <1000000>; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; + + i2c-switch@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + imux16: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux17: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux18: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux19: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux20: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux21: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux22: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux23: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; + + i2c-switch@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + imux24: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux25: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux26: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux27: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux28: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux29: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux30: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux31: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + + }; +}; + +&i2c9 { + status = "okay"; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; + + i2c-switch@76 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x76>; + i2c-mux-idle-disconnect; + + imux32: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux33: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux34: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux35: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux36: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux37: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux38: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux39: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + + }; +}; + +&i2c12 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; +}; + +&adc { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&uhci { + status = "okay"; +}; + +&sdhci1 { + /* + * DMA mode needs to be disabled to avoid conflicts with UHCI + * Controller in AST2500 SoC. + */ + sdhci-caps-mask = <0x0 0x580000>; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts index fe2e11c2da15..5e6105874217 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts @@ -108,3 +108,20 @@ &i2c13 { status = "okay"; }; + +&fmc_flash0 { +#include "facebook-bmc-flash-layout.dtsi" +}; + +&fmc_flash1 { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + flash1@0 { + reg = <0x0 0x2000000>; + label = "flash1"; + }; + }; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts index b94421f6cbd5..21ae880c7530 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts @@ -4,6 +4,7 @@ #include "aspeed-g6.dtsi" #include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/i2c/i2c.h> #include <dt-bindings/leds/leds-pca955x.h> / { @@ -52,9 +53,10 @@ }; vga_memory: region@bf000000 { - no-map; - reg = <0xbf000000 0x01000000>; /* 16M */ - }; + no-map; + compatible = "shared-dma-pool"; + reg = <0xbf000000 0x01000000>; /* 16M */ + }; }; gpio-keys { @@ -178,6 +180,10 @@ status = "okay"; }; +&pinctrl_emmc_default { + bias-disable; +}; + &emmc { status = "okay"; }; @@ -698,6 +704,7 @@ }; &i2c7 { + multi-master; status = "okay"; si7021-a20@20 { @@ -831,6 +838,11 @@ }; }; + ibm-panel@62 { + compatible = "ibm,op-panel"; + reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>; + }; + dps: dps310@76 { compatible = "infineon,dps310"; reg = <0x76>; @@ -1121,3 +1133,8 @@ spi-max-frequency = <100000000>; }; }; + +&xdma { + status = "okay"; + memory-region = <&vga_memory>; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts new file mode 100644 index 000000000000..b648e468e9db --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts @@ -0,0 +1,662 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/leds/leds-pca955x.h> + +/ { + model = "Mowgli BMC"; + compatible = "ibm,mowgli-bmc", "aspeed,ast2500"; + + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + flash_memory: region@98000000 { + no-map; + reg = <0x98000000 0x04000000>; /* 64M */ + }; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + + video_engine_memory: jpegbuffer { + size = <0x02000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + air-water { + label = "air-water"; + gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(F, 6)>; + }; + + checkstop { + label = "checkstop"; + gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(J, 2)>; + }; + + ps0-presence { + label = "ps0-presence"; + gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(Z, 2)>; + }; + + ps1-presence { + label = "ps1-presence"; + gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(Z, 0)>; + }; + + id-button { + label = "id-button"; + gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(F, 1)>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <1000>; + + fan0-presence { + label = "fan0-presence"; + gpios = <&pca9552 9 GPIO_ACTIVE_LOW>; + linux,code = <9>; + }; + + fan1-presence { + label = "fan1-presence"; + gpios = <&pca9552 10 GPIO_ACTIVE_LOW>; + linux,code = <10>; + }; + + fan2-presence { + label = "fan2-presence"; + gpios = <&pca9552 11 GPIO_ACTIVE_LOW>; + linux,code = <11>; + }; + + fan3-presence { + label = "fan3-presence"; + gpios = <&pca9552 12 GPIO_ACTIVE_LOW>; + linux,code = <12>; + }; + + fan4-presence { + label = "fan4-presence"; + gpios = <&pca9552 13 GPIO_ACTIVE_LOW>; + linux,code = <13>; + }; + }; + + leds { + compatible = "gpio-leds"; + + front-fault { + retain-state-shutdown; + default-state = "keep"; + gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>; + }; + + power-button { + retain-state-shutdown; + default-state = "keep"; + gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_LOW>; + }; + + front-id { + retain-state-shutdown; + default-state = "keep"; + gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>; + }; + + fan0 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca9552 0 GPIO_ACTIVE_LOW>; + }; + + fan1 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca9552 1 GPIO_ACTIVE_LOW>; + }; + + fan2 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca9552 2 GPIO_ACTIVE_LOW>; + }; + + fan3 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca9552 3 GPIO_ACTIVE_LOW>; + }; + + fan4 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca9552 4 GPIO_ACTIVE_LOW>; + }; + }; + + fsi: gpio-fsi { + compatible = "fsi-master-gpio", "fsi-master"; + #address-cells = <2>; + #size-cells = <0>; + no-gpio-delays; + + clock-gpios = <&gpio ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>; + data-gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_HIGH>; + mux-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>; + trans-gpios = <&gpio ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>; + }; + + iio-hwmon-12v { + compatible = "iio-hwmon"; + io-channels = <&adc 0>; + }; + + iio-hwmon-5v { + compatible = "iio-hwmon"; + io-channels = <&adc 1>; + }; + + iio-hwmon-3v { + compatible = "iio-hwmon"; + io-channels = <&adc 2>; + }; + + iio-hwmon-vdd { + compatible = "iio-hwmon"; + io-channels = <&adc 3>; + }; + + iio-hwmon-vcs { + compatible = "iio-hwmon"; + io-channels = <&adc 5>; + }; + + iio-hwmon-vdn { + compatible = "iio-hwmon"; + io-channels = <&adc 7>; + }; + + iio-hwmon-vio { + compatible = "iio-hwmon"; + io-channels = <&adc 9>; + }; + + iio-hwmon-vddra { + compatible = "iio-hwmon"; + io-channels = <&adc 11>; + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 12>; + }; + + iio-hwmon-vddrb { + compatible = "iio-hwmon"; + io-channels = <&adc 13>; + }; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default + &pinctrl_pwm2_default &pinctrl_pwm3_default + &pinctrl_pwm4_default>; + + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00>; + }; + + fan@1 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x01>; + }; + + fan@2 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x02>; + }; + + fan@3 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x03>; + }; + + fan@4 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x04>; + }; + + fan@5 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x05>; + }; + + fan@6 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x06>; + }; + + fan@7 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x07>; + }; + + fan@8 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x08>; + }; + + fan@9 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x09>; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + label = "bmc"; + m25p,fast-read; + spi-max-frequency = <50000000>; + partitions { + #address-cells = < 1 >; + #size-cells = < 1 >; + compatible = "fixed-partitions"; + u-boot@0 { + reg = < 0 0x60000 >; + label = "u-boot"; + }; + u-boot-env@60000 { + reg = < 0x60000 0x20000 >; + label = "u-boot-env"; + }; + obmc-ubi@80000 { + reg = < 0x80000 0x1F80000 >; + label = "obmc-ubi"; + }; + }; + }; + flash@1 { + status = "okay"; + label = "alt-bmc"; + m25p,fast-read; + spi-max-frequency = <50000000>; + partitions { + #address-cells = < 1 >; + #size-cells = < 1 >; + compatible = "fixed-partitions"; + u-boot@0 { + reg = < 0 0x60000 >; + label = "alt-u-boot"; + }; + u-boot-env@60000 { + reg = < 0x60000 0x20000 >; + label = "alt-u-boot-env"; + }; + obmc-ubi@80000 { + reg = < 0x80000 0x1F80000 >; + label = "alt-obmc-ubi"; + }; + }; + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + label = "pnor"; + m25p,fast-read; + spi-max-frequency = <100000000>; + }; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi1>; +}; + +&uart1 { + /* Rear RS-232 connector */ + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_nrts1_default + &pinctrl_ndtr1_default + &pinctrl_ndsr1_default + &pinctrl_ncts1_default + &pinctrl_ndcd1_default + &pinctrl_nri1_default>; +}; + +&uart2 { + /* APSS */ + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>; +}; + +&uart5 { + status = "okay"; +}; + +&mac0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + +&mac1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&i2c0 { + status = "okay"; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; +}; + +&i2c1 { + status = "disabled"; +}; + +&i2c2 { + status = "okay"; + + /* CPU MFG CONN */ + +}; + +&i2c3 { + status = "okay"; + + /* APSS */ + /* CPLD */ + + /* PCA9516 (repeater) -> + * CLK Buffer 9FGS9092 + * Power Supply 0 + * Power Supply 1 + * PCA 9552 LED + */ + + pca9552: pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@8 { + reg = <8>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@9 { + reg = <9>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@10 { + reg = <10>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@11 { + reg = <11>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@14 { + reg = <14>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@15 { + reg = <15>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + power-supply@68 { + compatible = "ibm,cffps1"; + reg = <0x68>; + }; + + power-supply@69 { + compatible = "ibm,cffps1"; + reg = <0x69>; + }; +}; + +&i2c4 { + status = "okay"; + + /* CP0 VDD & VCS : IR35221 */ + /* CP0 VDN & VIO : IR35221 */ + /* CP0 VDDR : IR35221 */ + + ir35221@28 { + compatible = "infineon,ir35221"; + reg = <0x28>; + }; + + ir35221@29 { + compatible = "infineon,ir35221"; + reg = <0x29>; + }; + + ir35221@2d { + compatible = "infineon,ir35221"; + reg = <0x2d>; + }; + +}; + +&i2c5 { + status = "disabled"; +}; + +&i2c6 { + status = "disabled"; +}; + +&i2c7 { + status = "disabled"; +}; + +&i2c8 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; +}; + +&i2c9 { + status = "okay"; + + /* PCIe G3 x16 slot */ +}; + +&i2c10 { + status = "disabled"; +}; + +&i2c11 { + status = "okay"; + + /* CPLD */ + /* TPM */ + /* RTC RX8900CE */ + /* TMP275A */ + /* TMP275A */ + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@49 { + compatible = "ti,tmp275"; + reg = <0x49>; + }; + +}; + +&i2c12 { + status = "disabled"; +}; + +&i2c13 { + status = "disabled"; +}; + +&vuart { + status = "okay"; +}; + +&gfx { + status = "okay"; + memory-region = <&gfx_memory>; +}; + +&adc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default + &pinctrl_adc1_default + &pinctrl_adc2_default + &pinctrl_adc3_default + &pinctrl_adc4_default + &pinctrl_adc5_default + &pinctrl_adc6_default + &pinctrl_adc7_default + &pinctrl_adc8_default + &pinctrl_adc9_default + &pinctrl_adc10_default + &pinctrl_adc11_default + &pinctrl_adc12_default + &pinctrl_adc13_default + &pinctrl_adc14_default + &pinctrl_adc15_default>; +}; + +&wdt1 { + aspeed,reset-type = "none"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; +}; + +&wdt2 { + aspeed,alt-boot; +}; + +&ibt { + status = "okay"; +}; + +&vhub { + status = "okay"; +}; + +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; + +#include "ibm-power9-dual.dtsi" diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts index 5f4ee67ac787..4d070d6ba09f 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts @@ -4,6 +4,7 @@ #include "aspeed-g6.dtsi" #include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/i2c/i2c.h> #include <dt-bindings/leds/leds-pca955x.h> / { @@ -438,7 +439,13 @@ }; &i2c0 { + multi-master; status = "okay"; + + ibm-panel@62 { + compatible = "ibm,op-panel"; + reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>; + }; }; &i2c1 { diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index 9c91afb2b404..a93009aa2f04 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -425,7 +425,6 @@ interrupts = <8>; clocks = <&syscon ASPEED_CLK_APB>; no-loopback-test; - aspeed,sirq-polarity-sense = <&syscon 0x70 25>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi index 7468f102bd76..c0c43b8644ee 100644 --- a/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi +++ b/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi @@ -47,25 +47,12 @@ status = "okay"; m25p,fast-read; label = "spi0.0"; - -#include "facebook-bmc-flash-layout.dtsi" }; fmc_flash1: flash@1 { status = "okay"; m25p,fast-read; label = "spi0.1"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - flash1@0 { - reg = <0x0 0x2000000>; - label = "flash1"; - }; - }; }; }; diff --git a/arch/arm/boot/dts/at91-ariag25.dts b/arch/arm/boot/dts/at91-ariag25.dts index dbfefef2869d..713d18f80356 100644 --- a/arch/arm/boot/dts/at91-ariag25.dts +++ b/arch/arm/boot/dts/at91-ariag25.dts @@ -22,7 +22,7 @@ bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait"; }; - memory { + memory@20000000 { /* 128 MB, change this for 256 MB revision */ reg = <0x20000000 0x8000000>; }; @@ -93,6 +93,7 @@ pinctrl-0 = < &pinctrl_mmc0_slot0_clk_cmd_dat0 &pinctrl_mmc0_slot0_dat1_3>; + pinctrl-names = "default"; status = "okay"; slot@0 { diff --git a/arch/arm/boot/dts/at91-ariettag25.dts b/arch/arm/boot/dts/at91-ariettag25.dts index 0267e72c074a..2c52a71752c2 100644 --- a/arch/arm/boot/dts/at91-ariettag25.dts +++ b/arch/arm/boot/dts/at91-ariettag25.dts @@ -15,7 +15,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@20000000 { reg = <0x20000000 0x8000000>; }; @@ -48,6 +48,7 @@ pinctrl-0 = < &pinctrl_mmc0_slot0_clk_cmd_dat0 &pinctrl_mmc0_slot0_dat1_3>; + pinctrl-names = "default"; status = "okay"; slot@0 { diff --git a/arch/arm/boot/dts/at91-cosino.dtsi b/arch/arm/boot/dts/at91-cosino.dtsi index feebd54f670e..ee0f5da6d819 100644 --- a/arch/arm/boot/dts/at91-cosino.dtsi +++ b/arch/arm/boot/dts/at91-cosino.dtsi @@ -20,7 +20,7 @@ bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait"; }; - memory { + memory@20000000 { reg = <0x20000000 0x8000000>; }; @@ -112,6 +112,7 @@ &pinctrl_board_mmc0 &pinctrl_mmc0_slot0_clk_cmd_dat0 &pinctrl_mmc0_slot0_dat1_3>; + pinctrl-names = "default"; status = "okay"; slot@0 { diff --git a/arch/arm/boot/dts/at91-cosino_mega2560.dts b/arch/arm/boot/dts/at91-cosino_mega2560.dts index 73e88d1ba4ed..04cb7bee937d 100644 --- a/arch/arm/boot/dts/at91-cosino_mega2560.dts +++ b/arch/arm/boot/dts/at91-cosino_mega2560.dts @@ -34,6 +34,7 @@ pinctrl-0 = < &pinctrl_mmc1_slot0_clk_cmd_dat0 &pinctrl_mmc1_slot0_dat1_3>; + pinctrl-names = "default"; status = "okay"; slot@0 { diff --git a/arch/arm/boot/dts/at91-foxg20.dts b/arch/arm/boot/dts/at91-foxg20.dts index 683b9e37f9c5..7edf057047f8 100644 --- a/arch/arm/boot/dts/at91-foxg20.dts +++ b/arch/arm/boot/dts/at91-foxg20.dts @@ -17,7 +17,7 @@ bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait"; }; - memory { + memory@20000000 { reg = <0x20000000 0x4000000>; }; @@ -55,6 +55,7 @@ &pinctrl_mmc0_clk &pinctrl_mmc0_slot1_cmd_dat0 &pinctrl_mmc0_slot1_dat1_3>; + pinctrl-names = "default"; status = "okay"; slot@1 { diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts index 7d938ccf71b0..7add151f6250 100644 --- a/arch/arm/boot/dts/at91-kizbox.dts +++ b/arch/arm/boot/dts/at91-kizbox.dts @@ -18,7 +18,7 @@ stdout-path = &dbgu; }; - memory { + memory@20000000 { reg = <0x20000000 0x2000000>; }; diff --git a/arch/arm/boot/dts/at91-kizbox2-common.dtsi b/arch/arm/boot/dts/at91-kizbox2-common.dtsi index af38253a6e7a..25f761065106 100644 --- a/arch/arm/boot/dts/at91-kizbox2-common.dtsi +++ b/arch/arm/boot/dts/at91-kizbox2-common.dtsi @@ -17,7 +17,7 @@ stdout-path = &dbgu; }; - memory { + memory@20000000 { reg = <0x20000000 0x10000000>; }; diff --git a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi index fddf267b2d17..d37724c10695 100644 --- a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi +++ b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi @@ -16,7 +16,7 @@ stdout-path = &dbgu; }; - memory { + memory@20000000 { reg = <0x20000000 0x8000000>; }; diff --git a/arch/arm/boot/dts/at91-linea.dtsi b/arch/arm/boot/dts/at91-linea.dtsi index 41f163955b1e..533a440d5583 100644 --- a/arch/arm/boot/dts/at91-linea.dtsi +++ b/arch/arm/boot/dts/at91-linea.dtsi @@ -13,7 +13,7 @@ compatible = "axentia,linea", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; - memory { + memory@20000000 { reg = <0x20000000 0x4000000>; }; }; diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/at91-qil_a9260.dts index a50b7fd2149f..969d990767fc 100644 --- a/arch/arm/boot/dts/at91-qil_a9260.dts +++ b/arch/arm/boot/dts/at91-qil_a9260.dts @@ -14,7 +14,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@20000000 { reg = <0x20000000 0x4000000>; }; @@ -52,6 +52,7 @@ &pinctrl_mmc0_clk &pinctrl_mmc0_slot0_cmd_dat0 &pinctrl_mmc0_slot0_dat1_3>; + pinctrl-names = "default"; status = "okay"; slot@0 { reg = <0>; diff --git a/arch/arm/boot/dts/at91-sam9_l9260.dts b/arch/arm/boot/dts/at91-sam9_l9260.dts index 954404ed8158..1e2a28c2f365 100644 --- a/arch/arm/boot/dts/at91-sam9_l9260.dts +++ b/arch/arm/boot/dts/at91-sam9_l9260.dts @@ -15,7 +15,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@20000000 { reg = <0x20000000 0x4000000>; }; @@ -49,6 +49,7 @@ &pinctrl_mmc0_clk &pinctrl_mmc0_slot1_cmd_dat0 &pinctrl_mmc0_slot1_dat1_3>; + pinctrl-names = "default"; status = "okay"; slot@1 { diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index 7abf555cd2fe..cf13632edd44 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -16,7 +16,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@20000000 { reg = <0x20000000 0x10000000>; }; diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi index 0be184a870eb..710cb72bda5a 100644 --- a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi +++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi @@ -9,7 +9,7 @@ model = "Aries/DENX MA5D4"; compatible = "aries,ma5d4", "denx,ma5d4", "atmel,sama5d4", "atmel,sama5"; - memory { + memory@20000000 { reg = <0x20000000 0x10000000>; }; diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index 924d9491780d..e5974a17374c 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -16,7 +16,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@20000000 { reg = <0x20000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts index 0cc1cff13e46..fe432b6b7e95 100644 --- a/arch/arm/boot/dts/at91-sama5d4ek.dts +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts @@ -16,7 +16,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@20000000 { reg = <0x20000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/at91-som60.dtsi b/arch/arm/boot/dts/at91-som60.dtsi index 241682a207c5..39474a112b16 100644 --- a/arch/arm/boot/dts/at91-som60.dtsi +++ b/arch/arm/boot/dts/at91-som60.dtsi @@ -16,7 +16,7 @@ stdout-path = &dbgu; }; - memory { + memory@20000000 { reg = <0x20000000 0x8000000>; }; diff --git a/arch/arm/boot/dts/at91-vinco.dts b/arch/arm/boot/dts/at91-vinco.dts index 15050fdd479d..a51a3372afa1 100644 --- a/arch/arm/boot/dts/at91-vinco.dts +++ b/arch/arm/boot/dts/at91-vinco.dts @@ -17,7 +17,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@20000000 { reg = <0x20000000 0x4000000>; }; diff --git a/arch/arm/boot/dts/at91-wb45n.dtsi b/arch/arm/boot/dts/at91-wb45n.dtsi index ebe61a25ca96..430c75358086 100644 --- a/arch/arm/boot/dts/at91-wb45n.dtsi +++ b/arch/arm/boot/dts/at91-wb45n.dtsi @@ -17,7 +17,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@20000000 { reg = <0x20000000 0x4000000>; }; @@ -145,6 +145,7 @@ }; &mmc0 { + pinctrl-names = "default"; pinctrl-0 = < &pinctrl_mmc0_slot0_clk_cmd_dat0 &pinctrl_mmc0_slot0_dat1_3>; diff --git a/arch/arm/boot/dts/at91-wb50n.dtsi b/arch/arm/boot/dts/at91-wb50n.dtsi index 1487b893cfa7..74b249bb6351 100644 --- a/arch/arm/boot/dts/at91-wb50n.dtsi +++ b/arch/arm/boot/dts/at91-wb50n.dtsi @@ -17,7 +17,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@20000000 { reg = <0x20000000 0x4000000>; }; }; diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index a5040f5ea641..d1181ead18e5 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -39,16 +39,17 @@ ssc2 = &ssc2; }; cpus { - #address-cells = <0>; + #address-cells = <1>; #size-cells = <0>; - cpu { + cpu@0 { compatible = "arm,arm920t"; device_type = "cpu"; + reg = <0>; }; }; - memory { + memory@20000000 { device_type = "memory"; reg = <0x20000000 0x04000000>; }; @@ -70,6 +71,9 @@ sram: sram@200000 { compatible = "mmio-sram"; reg = <0x00200000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00200000 0x4000>; }; ahb { @@ -169,7 +173,6 @@ clock-names = "mci_clk"; #address-cells = <1>; #size-cells = <0>; - pinctrl-names = "default"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts index 1e0bf5afa913..e1ef4e44e663 100644 --- a/arch/arm/boot/dts/at91rm9200ek.dts +++ b/arch/arm/boot/dts/at91rm9200ek.dts @@ -15,7 +15,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@20000000 { reg = <0x20000000 0x4000000>; }; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 6afbb48e7ff0..82c5d7fd9811 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -36,16 +36,17 @@ ssc0 = &ssc0; }; cpus { - #address-cells = <0>; + #address-cells = <1>; #size-cells = <0>; - cpu { + cpu@0 { compatible = "arm,arm926ej-s"; device_type = "cpu"; + reg = <0>; }; }; - memory { + memory@20000000 { device_type = "memory"; reg = <0x20000000 0x04000000>; }; @@ -73,6 +74,9 @@ sram0: sram@2ff000 { compatible = "mmio-sram"; reg = <0x002ff000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x002ff000 0x2000>; }; ahb { @@ -650,7 +654,6 @@ interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; - pinctrl-names = "default"; clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; clock-names = "mci_clk"; status = "disabled"; diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts index 81f808a10931..d3446e42b598 100644 --- a/arch/arm/boot/dts/at91sam9260ek.dts +++ b/arch/arm/boot/dts/at91sam9260ek.dts @@ -16,7 +16,7 @@ stdout-path = &dbgu; }; - memory { + memory@20000000 { reg = <0x20000000 0x4000000>; }; @@ -55,6 +55,7 @@ &pinctrl_mmc0_clk &pinctrl_mmc0_slot1_cmd_dat0 &pinctrl_mmc0_slot1_dat1_3>; + pinctrl-names = "default"; status = "okay"; slot@1 { reg = <1>; diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index 5ed3d745ac86..7adc36ca8a46 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -33,16 +33,17 @@ }; cpus { - #address-cells = <0>; + #address-cells = <1>; #size-cells = <0>; - cpu { + cpu@0 { compatible = "arm,arm926ej-s"; device_type = "cpu"; + reg = <0>; }; }; - memory { + memory@20000000 { device_type = "memory"; reg = <0x20000000 0x08000000>; }; @@ -64,6 +65,9 @@ sram: sram@300000 { compatible = "mmio-sram"; reg = <0x00300000 0x28000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00300000 0x28000>; }; ahb { diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts index c4ef74fea97c..beed819609e8 100644 --- a/arch/arm/boot/dts/at91sam9261ek.dts +++ b/arch/arm/boot/dts/at91sam9261ek.dts @@ -16,7 +16,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@20000000 { reg = <0x20000000 0x4000000>; }; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 5c990cfae254..fe45d96239c9 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -35,16 +35,17 @@ }; cpus { - #address-cells = <0>; + #address-cells = <1>; #size-cells = <0>; - cpu { + cpu@0 { compatible = "arm,arm926ej-s"; device_type = "cpu"; + reg = <0>; }; }; - memory { + memory@20000000 { device_type = "memory"; reg = <0x20000000 0x08000000>; }; @@ -66,11 +67,17 @@ sram0: sram@300000 { compatible = "mmio-sram"; reg = <0x00300000 0x14000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00300000 0x14000>; }; sram1: sram@500000 { compatible = "mmio-sram"; reg = <0x00500000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00500000 0x4000>; }; ahb { @@ -647,7 +654,6 @@ compatible = "atmel,hsmci"; reg = <0xfff80000 0x600>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>; - pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; @@ -659,7 +665,6 @@ compatible = "atmel,hsmci"; reg = <0xfff84000 0x600>; interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>; - pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts index 62d218542a48..71f60576761a 100644 --- a/arch/arm/boot/dts/at91sam9263ek.dts +++ b/arch/arm/boot/dts/at91sam9263ek.dts @@ -16,7 +16,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@20000000 { reg = <0x20000000 0x4000000>; }; @@ -72,6 +72,7 @@ &pinctrl_mmc0_clk &pinctrl_mmc0_slot0_cmd_dat0 &pinctrl_mmc0_slot0_dat1_3>; + pinctrl-names = "default"; status = "okay"; slot@0 { reg = <0>; diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi index 4117cf880508..708e1646b7f4 100644 --- a/arch/arm/boot/dts/at91sam9g20.dtsi +++ b/arch/arm/boot/dts/at91sam9g20.dtsi @@ -11,7 +11,7 @@ model = "Atmel AT91SAM9G20 family SoC"; compatible = "atmel,at91sam9g20"; - memory { + memory@20000000 { reg = <0x20000000 0x08000000>; }; @@ -22,6 +22,9 @@ sram1: sram@2fc000 { compatible = "mmio-sram"; reg = <0x002fc000 0x8000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x002fc000 0x8000>; }; ahb { diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index bda22700110c..6e6e672c0b86 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -13,7 +13,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@20000000 { reg = <0x20000000 0x4000000>; }; @@ -93,6 +93,7 @@ &pinctrl_mmc0_clk &pinctrl_mmc0_slot1_cmd_dat0 &pinctrl_mmc0_slot1_dat1_3>; + pinctrl-names = "default"; status = "okay"; slot@1 { reg = <1>; diff --git a/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts b/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts new file mode 100644 index 000000000000..7da70aeeb528 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts @@ -0,0 +1,158 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Device Tree file for the GARDENA smart Gateway (Article No. 19000) + * + * Copyright (C) 2020 GARDENA GmbH + */ + +/dts-v1/; + +#include "at91sam9g25.dtsi" +#include "at91sam9x5ek.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "GARDENA smart Gateway (Article No. 19000)"; + compatible = "gardena,smart-gateway-at91sam", "atmel,at91sam9g25", "atmel,at91sam9x5", + "atmel,at91sam9"; + + aliases { + serial1 = &usart3; + }; + + gpio-keys { + compatible = "gpio-keys"; + + user_btn1 { + label = "USER_BTN1"; + gpios = <&pioA 24 GPIO_ACTIVE_LOW>; + linux,code = <KEY_PROG1>; + }; + }; + + 1wire_cm { + status = "disabled"; + }; + + leds { + compatible = "gpio-leds"; + + power_blue { + label = "smartgw:power:blue"; + gpios = <&pioC 21 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + power_green { + label = "smartgw:power:green"; + gpios = <&pioC 20 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + power_red { + label = "smartgw:power:red"; + gpios = <&pioC 19 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + radio_blue { + label = "smartgw:radio:blue"; + gpios = <&pioC 18 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + radio_green { + label = "smartgw:radio:green"; + gpios = <&pioC 17 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + radio_red { + label = "smartgw:radio:red"; + gpios = <&pioC 16 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + internet_blue { + label = "smartgw:internet:blue"; + gpios = <&pioC 15 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + internet_green { + label = "smartgw:internet:green"; + gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + internet_red { + label = "smartgw:internet:red"; + gpios = <&pioC 13 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + heartbeat { + label = "smartgw:heartbeat"; + gpios = <&pioB 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + pb18 { + status = "disabled"; + }; + + pd21 { + status = "disabled"; + }; + }; +}; + +&macb0 { + phy-mode = "rmii"; + status = "okay"; +}; + +&usart0 { + status = "disabled"; +}; + +&usart2 { + status = "disabled"; +}; + +&usart3 { + status = "okay"; + + pinctrl-0 = <&pinctrl_usart3 + &pinctrl_usart3_rts + &pinctrl_usart3_cts + >; +}; + +&watchdog { + status = "okay"; +}; + +&mmc0 { + status = "disabled"; +}; + +&mmc1 { + status = "disabled"; +}; + +&spi0 { + status = "disabled"; +}; + +&i2c0 { + status = "disabled"; +}; + +&adc0 { + status = "disabled"; +}; + +&ssc0 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 1fbee2a7785f..19fc748a87c5 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -41,16 +41,17 @@ pwm0 = &pwm0; }; cpus { - #address-cells = <0>; + #address-cells = <1>; #size-cells = <0>; - cpu { + cpu@0 { compatible = "arm,arm926ej-s"; device_type = "cpu"; + reg = <0>; }; }; - memory { + memory@70000000 { device_type = "memory"; reg = <0x70000000 0x10000000>; }; @@ -78,6 +79,9 @@ sram: sram@300000 { compatible = "mmio-sram"; reg = <0x00300000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00300000 0x10000>; }; ahb { @@ -871,7 +875,6 @@ compatible = "atmel,hsmci"; reg = <0xfff80000 0x600>; interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>; - pinctrl-names = "default"; dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; #address-cells = <1>; @@ -885,7 +888,6 @@ compatible = "atmel,hsmci"; reg = <0xfffd0000 0x600>; interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>; - pinctrl-names = "default"; dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>; dma-names = "rxtx"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index a3a5c82d9f29..9734667abbfc 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -18,7 +18,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@70000000 { reg = <0x70000000 0x4000000>; }; @@ -99,6 +99,7 @@ &pinctrl_board_mmc0 &pinctrl_mmc0_slot0_clk_cmd_dat0 &pinctrl_mmc0_slot0_dat1_3>; + pinctrl-names = "default"; status = "okay"; slot@0 { reg = <0>; @@ -112,6 +113,7 @@ &pinctrl_board_mmc1 &pinctrl_mmc1_slot0_clk_cmd_dat0 &pinctrl_mmc1_slot0_dat1_3>; + pinctrl-names = "default"; status = "okay"; slot@0 { reg = <0>; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index a994d076dc7e..0785389f5507 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -37,16 +37,17 @@ pwm0 = &pwm0; }; cpus { - #address-cells = <0>; + #address-cells = <1>; #size-cells = <0>; - cpu { + cpu@0 { compatible = "arm,arm926ej-s"; device_type = "cpu"; + reg = <0>; }; }; - memory { + memory@20000000 { device_type = "memory"; reg = <0x20000000 0x10000000>; }; @@ -68,6 +69,9 @@ sram: sram@300000 { compatible = "mmio-sram"; reg = <0x00300000 0x8000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00300000 0x8000>; }; ahb { diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index 870b83ff6b97..2bc4e6e0a923 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -17,7 +17,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@20000000 { reg = <0x20000000 0x8000000>; }; diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index 4d70194fd808..5653e70c84b4 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -38,16 +38,17 @@ }; cpus { - #address-cells = <0>; + #address-cells = <1>; #size-cells = <0>; - cpu { + cpu@0 { compatible = "arm,arm926ej-s"; device_type = "cpu"; + reg = <0>; }; }; - memory { + memory@20000000 { device_type = "memory"; reg = <0x20000000 0x04000000>; }; @@ -75,6 +76,9 @@ sram: sram@300000 { compatible = "mmio-sram"; reg = <0x00300000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00300000 0x10000>; }; ahb { diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts index 0de75d3c4f18..1590862f16f2 100644 --- a/arch/arm/boot/dts/at91sam9rlek.dts +++ b/arch/arm/boot/dts/at91sam9rlek.dts @@ -17,7 +17,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@20000000 { reg = <0x20000000 0x4000000>; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 948fe99ab6c3..4cdb05079cc7 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -39,16 +39,17 @@ pwm0 = &pwm0; }; cpus { - #address-cells = <0>; + #address-cells = <1>; #size-cells = <0>; - cpu { + cpu@0 { compatible = "arm,arm926ej-s"; device_type = "cpu"; + reg = <0>; }; }; - memory { + memory@20000000 { device_type = "memory"; reg = <0x20000000 0x10000000>; }; @@ -76,6 +77,9 @@ sram: sram@300000 { compatible = "mmio-sram"; reg = <0x00300000 0x8000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00300000 0x8000>; }; ahb { @@ -647,7 +651,6 @@ interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; - pinctrl-names = "default"; clocks = <&pmc PMC_TYPE_PERIPHERAL 12>; clock-names = "mci_clk"; #address-cells = <1>; @@ -661,7 +664,6 @@ interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; - pinctrl-names = "default"; clocks = <&pmc PMC_TYPE_PERIPHERAL 26>; clock-names = "mci_clk"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi index 75d2f7fd314f..cdd37f67280b 100644 --- a/arch/arm/boot/dts/at91sam9x5cm.dtsi +++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi @@ -7,7 +7,7 @@ */ / { - memory { + memory@20000000 { reg = <0x20000000 0x8000000>; }; diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi index c934928742b0..6d1264de6060 100644 --- a/arch/arm/boot/dts/at91sam9x5ek.dtsi +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi @@ -56,6 +56,7 @@ &pinctrl_board_mmc0 &pinctrl_mmc0_slot0_clk_cmd_dat0 &pinctrl_mmc0_slot0_dat1_3>; + pinctrl-names = "default"; status = "okay"; slot@0 { @@ -70,6 +71,7 @@ &pinctrl_board_mmc1 &pinctrl_mmc1_slot0_clk_cmd_dat0 &pinctrl_mmc1_slot0_dat1_3>; + pinctrl-names = "default"; status = "okay"; slot@0 { diff --git a/arch/arm/boot/dts/at91sam9xe.dtsi b/arch/arm/boot/dts/at91sam9xe.dtsi index 3f9d8caf8b0a..f571f77779c3 100644 --- a/arch/arm/boot/dts/at91sam9xe.dtsi +++ b/arch/arm/boot/dts/at91sam9xe.dtsi @@ -19,5 +19,8 @@ sram1: sram@300000 { compatible = "mmio-sram"; reg = <0x00300000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00300000 0x4000>; }; }; diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index 35bdd0969f0a..dacaef2c14ca 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -234,8 +234,8 @@ compatible = "arm,sp805" , "arm,primecell"; reg = <0x18009000 0x1000>; interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&axi81_clk>; - clock-names = "apb_pclk"; + clocks = <&axi81_clk>, <&axi81_clk>; + clock-names = "wdog_clk", "apb_pclk"; }; gpio_ccm: gpio@1800a000 { diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index c846fa3c244d..e895f7cb8c9f 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -368,7 +368,7 @@ }; ccbtimer0: timer@34000 { - compatible = "arm,sp804"; + compatible = "arm,sp804", "arm,primecell"; reg = <0x34000 0x1000>; interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; @@ -377,7 +377,7 @@ }; ccbtimer1: timer@35000 { - compatible = "arm,sp804"; + compatible = "arm,sp804", "arm,primecell"; reg = <0x35000 0x1000>; interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; @@ -438,7 +438,7 @@ reg = <0x39000 0x1000>; interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; clocks = <&iprocslow>, <&iprocslow>; - clock-names = "wdogclk", "apb_pclk"; + clock-names = "wdog_clk", "apb_pclk"; }; lcpll0: lcpll0@3f100 { diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts index e94244a215af..09a1182c2936 100644 --- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts +++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts @@ -70,6 +70,14 @@ }; }; +&ddc0 { + status = "okay"; +}; + +&ddc1 { + status = "okay"; +}; + &firmware { firmware_clocks: clocks { compatible = "raspberrypi,firmware-clocks"; @@ -170,6 +178,38 @@ "RGMII_TXD3"; }; +&hdmi0 { + clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>; + clock-names = "hdmi", "bvb", "audio", "cec"; + status = "okay"; +}; + +&hdmi1 { + clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>; + clock-names = "hdmi", "bvb", "audio", "cec"; + status = "okay"; +}; + +&hvs { + clocks = <&firmware_clocks 4>; +}; + +&pixelvalve0 { + status = "okay"; +}; + +&pixelvalve1 { + status = "okay"; +}; + +&pixelvalve2 { + status = "okay"; +}; + +&pixelvalve4 { + status = "okay"; +}; + &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>; @@ -253,3 +293,11 @@ &vchiq { interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; }; + +&vc4 { + status = "okay"; +}; + +&vec { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi index 00bcaed1be32..4847dd305317 100644 --- a/arch/arm/boot/dts/bcm2711.dtsi +++ b/arch/arm/boot/dts/bcm2711.dtsi @@ -12,6 +12,18 @@ interrupt-parent = <&gicv2>; + vc4: gpu { + compatible = "brcm,bcm2711-vc5"; + status = "disabled"; + }; + + clk_27MHz: clk-27M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <27000000>; + clock-output-names = "27MHz-clock"; + }; + clk_108MHz: clk-108M { #clock-cells = <0>; compatible = "fixed-clock"; @@ -238,6 +250,27 @@ status = "disabled"; }; + pixelvalve0: pixelvalve@7e206000 { + compatible = "brcm,bcm2711-pixelvalve0"; + reg = <0x7e206000 0x100>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + pixelvalve1: pixelvalve@7e207000 { + compatible = "brcm,bcm2711-pixelvalve1"; + reg = <0x7e207000 0x100>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + pixelvalve2: pixelvalve@7e20a000 { + compatible = "brcm,bcm2711-pixelvalve2"; + reg = <0x7e20a000 0x100>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + pwm1: pwm@7e20c800 { compatible = "brcm,bcm2835-pwm"; reg = <0x7e20c800 0x28>; @@ -248,10 +281,25 @@ status = "disabled"; }; - hvs@7e400000 { + pixelvalve4: pixelvalve@7e216000 { + compatible = "brcm,bcm2711-pixelvalve4"; + reg = <0x7e216000 0x100>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + hvs: hvs@7e400000 { + compatible = "brcm,bcm2711-hvs"; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; }; + pixelvalve3: pixelvalve@7ec12000 { + compatible = "brcm,bcm2711-pixelvalve3"; + reg = <0x7ec12000 0x100>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + dvp: clock@7ef00000 { compatible = "brcm,brcm2711-dvp"; reg = <0x7ef00000 0x10>; @@ -259,6 +307,78 @@ #clock-cells = <1>; #reset-cells = <1>; }; + + hdmi0: hdmi@7ef00700 { + compatible = "brcm,bcm2711-hdmi0"; + reg = <0x7ef00700 0x300>, + <0x7ef00300 0x200>, + <0x7ef00f00 0x80>, + <0x7ef00f80 0x80>, + <0x7ef01b00 0x200>, + <0x7ef01f00 0x400>, + <0x7ef00200 0x80>, + <0x7ef04300 0x100>, + <0x7ef20000 0x100>; + reg-names = "hdmi", + "dvp", + "phy", + "rm", + "packet", + "metadata", + "csc", + "cec", + "hd"; + clock-names = "hdmi", "bvb", "audio", "cec"; + resets = <&dvp 0>; + ddc = <&ddc0>; + dmas = <&dma 10>; + dma-names = "audio-rx"; + status = "disabled"; + }; + + ddc0: i2c@7ef04500 { + compatible = "brcm,bcm2711-hdmi-i2c"; + reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>; + reg-names = "bsc", "auto-i2c"; + clock-frequency = <97500>; + status = "disabled"; + }; + + hdmi1: hdmi@7ef05700 { + compatible = "brcm,bcm2711-hdmi1"; + reg = <0x7ef05700 0x300>, + <0x7ef05300 0x200>, + <0x7ef05f00 0x80>, + <0x7ef05f80 0x80>, + <0x7ef06b00 0x200>, + <0x7ef06f00 0x400>, + <0x7ef00280 0x80>, + <0x7ef09300 0x100>, + <0x7ef20000 0x100>; + reg-names = "hdmi", + "dvp", + "phy", + "rm", + "packet", + "metadata", + "csc", + "cec", + "hd"; + ddc = <&ddc1>; + clock-names = "hdmi", "bvb", "audio", "cec"; + resets = <&dvp 1>; + dmas = <&dma 17>; + dma-names = "audio-rx"; + status = "disabled"; + }; + + ddc1: i2c@7ef09500 { + compatible = "brcm,bcm2711-hdmi-i2c"; + reg = <0x7ef09500 0x100>, <0x7ef05b00 0x300>; + reg-names = "bsc", "auto-i2c"; + clock-frequency = <97500>; + status = "disabled"; + }; }; /* diff --git a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts new file mode 100644 index 000000000000..3b978dc8997a --- /dev/null +++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts @@ -0,0 +1,197 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Meraki MR32 / Codename: Espresso + * + * Copyright (C) 2018-2020 Christian Lamparter <chunkeey@gmail.com> + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" +#include <dt-bindings/leds/common.h> + +/ { + compatible = "meraki,mr32", "brcm,brcm53016", "brcm,bcm4708"; + model = "Meraki MR32"; + + chosen { + bootargs = " console=ttyS0,115200n8 earlycon"; + }; + + memory { + reg = <0x00000000 0x08000000>; + device_type = "memory"; + }; + + aliases { + serial1 = &uart2; + }; + + leds { + compatible = "gpio-leds"; + + sysled3 { + function = LED_FUNCTION_FAULT; + color = <LED_COLOR_ID_AMBER>; + gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; + panic-indicator; + }; + sysled2 { + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_WHITE>; + gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>; + }; + }; + + keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>; + }; + }; + + pwm-leds { + compatible = "pwm-leds"; + + red { + /* SYS-LED 1 - Tricolor */ + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_RED>; + pwms = <&pwm 0 50000 0>; + max-brightness = <255>; + }; + + green { + /* SYS-LED 1 - Tricolor */ + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_GREEN>; + pwms = <&pwm 1 50000 0>; + max-brightness = <255>; + }; + + blue { + /* SYS-LED 1 - Tricolor */ + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_BLUE>; + pwms = <&pwm 2 50000 0>; + max-brightness = <255>; + }; + }; + + i2c { + /* + * The platform provided I2C does not budge. + * This is a replacement until I can figure + * out what are the missing bits... + */ + + compatible = "i2c-gpio"; + sda-gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; + scl-gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; + i2c-gpio,delay-us = <10>; /* close to 100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + + current_sense: ina219@45 { + compatible = "ti,ina219"; + reg = <0x45>; + shunt-resistor = <60000>; /* = 60 mOhms */ + }; + + eeprom: eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + read-only; + }; + }; +}; + +&uart0 { + clock-frequency = <62500000>; + /delete-property/ clocks; +}; + +&uart1 { + status = "disabled"; +}; + +&uart2 { + status = "okay"; + /* + * bluetooth-le { + * compatible = "brcm,bcm20732"; + * enable-gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>; + *}; + */ +}; + +&gmac1 { + status = "disabled"; +}; +&gmac2 { + status = "disabled"; +}; +&gmac3 { + status = "disabled"; +}; + +&pwm { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_pwm>; +}; + +&nandcs { + nand-ecc-algo = "hw"; + + partitions { + /* + * The partition autodetection does not work for this device. + * It will only detect the "nvram" partition with an incorrect size. + * [ 1.721667] 1 bcm47xxpart partitions found on MTD device brcmnand.0 + * [ 1.727962] Creating 1 MTD partitions on "brcmnand.0": + * [ 1.733117] 0x000000400000-0x000008000000 : "nvram" + */ + + compatible = "fixed-partitions"; + #address-cells = <0x1>; + #size-cells = <0x1>; + + partition0@0 { + label = "u-boot"; + reg = <0x0 0x100000>; + read-only; + }; + + partition1@100000 { + label = "bootkernel1"; + reg = <0x100000 0x300000>; + read-only; + }; + + partition2@400000 { + label = "nvram"; + reg = <0x400000 0x100000>; + read-only; + }; + + partition3@500000 { + label = "bootkernel2"; + reg = <0x500000 0x300000>; + read-only; + }; + + partition4@800000 { + label = "ubi"; + reg = <0x800000 0x7780000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 0016720ce530..ac3a99cf2079 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -252,6 +252,10 @@ reg = <0x00013000 0x1000>; }; + pcie2: pcie@14000 { + reg = <0x00014000 0x1000>; + }; + usb2: usb2@21000 { reg = <0x00021000 0x1000>; @@ -350,6 +354,14 @@ }; }; + pwm: pwm@18002000 { + compatible = "brcm,iproc-pwm"; + reg = <0x18002000 0x28>; + clocks = <&osc>; + #pwm-cells = <3>; + status = "disabled"; + }; + mdio: mdio@18003000 { compatible = "brcm,iproc-mdio"; reg = <0x18003000 0x8>; @@ -384,6 +396,15 @@ reg = <0x18105000 0x1000>; }; + uart2: serial@18008000 { + compatible = "ns16550a"; + reg = <0x18008000 0x20>; + clocks = <&iprocslow>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + status = "disabled"; + }; + i2c0: i2c@18009000 { compatible = "brcm,iproc-i2c"; reg = <0x18009000 0x50>; @@ -417,12 +438,12 @@ function = "spi"; }; - i2c { + pinmux_i2c: i2c { groups = "i2c_grp"; function = "i2c"; }; - pwm { + pinmux_pwm: pwm { groups = "pwm0_grp", "pwm1_grp", "pwm2_grp", "pwm3_grp"; function = "pwm"; diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts index 716da62f5788..21f922dc6019 100644 --- a/arch/arm/boot/dts/bcm958525xmc.dts +++ b/arch/arm/boot/dts/bcm958525xmc.dts @@ -196,7 +196,7 @@ }; &sdio { - status = "ok"; + status = "okay"; }; &uart0 { diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts index 7b84b54436ed..7782b61c51a1 100644 --- a/arch/arm/boot/dts/bcm958625k.dts +++ b/arch/arm/boot/dts/bcm958625k.dts @@ -208,7 +208,7 @@ &sdio { bus-width = <4>; no-1-8-v; - status = "ok"; + status = "okay"; }; &srab { diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index a952d934fcf2..38530dbb89a0 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -537,24 +537,23 @@ ti,no-idle-on-init; }; -&mac { +&mac_sw { status = "okay"; - dual_emac; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <ðphy0>; phy-mode = "rgmii"; - dual_emac_res_vlan = <1>; + ti,dual-emac-pvid = <1>; }; -&cpsw_emac1 { +&cpsw_port2 { phy-handle = <ðphy1>; phy-mode = "rgmii"; - dual_emac_res_vlan = <2>; + ti,dual-emac-pvid = <2>; }; -&davinci_mdio { +&davinci_mdio_sw { ethphy0: ethernet-phy@2 { reg = <2>; }; @@ -565,7 +564,7 @@ }; &dcan1 { - status = "ok"; + status = "okay"; pinctrl-names = "default", "sleep", "active"; pinctrl-0 = <&dcan1_pins_sleep>; pinctrl-1 = <&dcan1_pins_sleep>; diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi index f43b764cc0c7..3bf90d9e3335 100644 --- a/arch/arm/boot/dts/dra7-l4.dtsi +++ b/arch/arm/boot/dts/dra7-l4.dtsi @@ -3038,60 +3038,6 @@ */ ti,no-idle; - mac: ethernet@0 { - compatible = "ti,dra7-cpsw","ti,cpsw"; - clocks = <&gmac_main_clk>, <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 25>; - clock-names = "fck", "cpts"; - cpdma_channels = <8>; - ale_entries = <1024>; - bd_ram_size = <0x2000>; - mac_control = <0x20>; - slaves = <2>; - active_slave = <0>; - cpts_clock_mult = <0x784CFE14>; - cpts_clock_shift = <29>; - reg = <0x0 0x1000 - 0x1200 0x2e00>; - #address-cells = <1>; - #size-cells = <1>; - - /* - * rx_thresh_pend - * rx_pend - * tx_pend - * misc_pend - */ - interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>; - ranges = <0 0 0x4000>; - syscon = <&scm_conf>; - status = "disabled"; - - davinci_mdio: mdio@1000 { - compatible = "ti,cpsw-mdio","ti,davinci_mdio"; - clocks = <&gmac_main_clk>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <0>; - bus_freq = <1000000>; - reg = <0x1000 0x100>; - }; - - cpsw_emac0: slave@200 { - /* Filled in by U-Boot */ - mac-address = [ 00 00 00 00 00 00 ]; - phys = <&phy_gmii_sel 1>; - }; - - cpsw_emac1: slave@300 { - /* Filled in by U-Boot */ - mac-address = [ 00 00 00 00 00 00 ]; - phys = <&phy_gmii_sel 2>; - }; - }; - mac_sw: switch@0 { compatible = "ti,dra7-cpsw-switch","ti,cpsw-switch"; reg = <0x0 0x4000>; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index cca6b123856f..4e1bbc0198eb 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -37,8 +37,8 @@ serial7 = &uart8; serial8 = &uart9; serial9 = &uart10; - ethernet0 = &cpsw_emac0; - ethernet1 = &cpsw_emac1; + ethernet0 = &cpsw_port1; + ethernet1 = &cpsw_port2; d_can0 = &dcan1; d_can1 = &dcan2; spi0 = &qspi; diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts index 10da51bee42f..cad58f733bd6 100644 --- a/arch/arm/boot/dts/dra71-evm.dts +++ b/arch/arm/boot/dts/dra71-evm.dts @@ -219,26 +219,26 @@ vqmmc-supply = <&evm_1v8_sw>; }; -&mac { +&mac_sw { mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>, <&pcf_hdmi 9 GPIO_ACTIVE_LOW>, /* P11 */ <&pcf_hdmi 10 GPIO_ACTIVE_LOW>; /* P12 */ - dual_emac; + status = "okay"; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <&dp83867_0>; phy-mode = "rgmii-id"; - dual_emac_res_vlan = <1>; + ti,dual-emac-pvid = <1>; }; -&cpsw_emac1 { +&cpsw_port2 { phy-handle = <&dp83867_1>; phy-mode = "rgmii-id"; - dual_emac_res_vlan = <2>; + ti,dual-emac-pvid = <2>; }; -&davinci_mdio { +&davinci_mdio_sw { dp83867_0: ethernet-phy@2 { reg = <2>; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi index 9273a7d6fa29..b65b2dd094d0 100644 --- a/arch/arm/boot/dts/dra72-evm-common.dtsi +++ b/arch/arm/boot/dts/dra72-evm-common.dtsi @@ -462,12 +462,8 @@ }; }; -&mac { - status = "okay"; -}; - &dcan1 { - status = "ok"; + status = "okay"; pinctrl-names = "default", "sleep", "active"; pinctrl-0 = <&dcan1_pins_sleep>; pinctrl-1 = <&dcan1_pins_sleep>; @@ -536,11 +532,11 @@ }; &dss { - status = "ok"; + status = "okay"; }; &hdmi { - status = "ok"; + status = "okay"; port { hdmi_out: endpoint { diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts index 54dab0f212d1..f242b937f88c 100644 --- a/arch/arm/boot/dts/dra72-evm-revc.dts +++ b/arch/arm/boot/dts/dra72-evm-revc.dts @@ -77,26 +77,26 @@ interrupts = <30 IRQ_TYPE_EDGE_FALLING>; }; -&mac { +&mac_sw { mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>, <&pcf_hdmi 9 GPIO_ACTIVE_LOW>, /* P11 */ <&pcf_hdmi 10 GPIO_ACTIVE_LOW>; /* P12 */ - dual_emac; + status = "okay"; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <&dp83867_0>; phy-mode = "rgmii-id"; - dual_emac_res_vlan = <1>; + ti,dual-emac-pvid = <1>; }; -&cpsw_emac1 { +&cpsw_port2 { phy-handle = <&dp83867_1>; phy-mode = "rgmii-id"; - dual_emac_res_vlan = <2>; + ti,dual-emac-pvid = <2>; }; -&davinci_mdio { +&davinci_mdio_sw { dp83867_0: ethernet-phy@2 { reg = <2>; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 6ea9936f7d9c..5f62f92eb96c 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -69,17 +69,22 @@ interrupts = <11 IRQ_TYPE_EDGE_FALLING>; }; -&mac { - slaves = <1>; +&mac_sw { mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_HIGH>; + status = "okay"; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <ðphy0>; phy-mode = "rgmii"; + ti,dual-emac-pvid = <1>; +}; + +&cpsw_port2 { + status = "disabled"; }; -&davinci_mdio { +&davinci_mdio_sw { ethphy0: ethernet-phy@3 { reg = <3>; }; diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts index 803981cc762e..9bd01ae40b1d 100644 --- a/arch/arm/boot/dts/dra76-evm.dts +++ b/arch/arm/boot/dts/dra76-evm.dts @@ -475,25 +475,23 @@ status = "disabled"; }; -&mac { +&mac_sw { status = "okay"; - - dual_emac; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <&dp83867_0>; phy-mode = "rgmii-id"; - dual_emac_res_vlan = <1>; + ti,dual-emac-pvid = <1>; }; -&cpsw_emac1 { +&cpsw_port2 { phy-handle = <&dp83867_1>; phy-mode = "rgmii-id"; - dual_emac_res_vlan = <2>; + ti,dual-emac-pvid = <2>; }; -&davinci_mdio { +&davinci_mdio_sw { dp83867_0: ethernet-phy@2 { reg = <2>; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; @@ -522,12 +520,12 @@ }; &dss { - status = "ok"; + status = "okay"; vdda_video-supply = <&ldo5_reg>; }; &hdmi { - status = "ok"; + status = "okay"; vdda-supply = <&ldo1_reg>; diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi index 96678ddbb4e6..ecfaa0b7523e 100644 --- a/arch/arm/boot/dts/emev2.dtsi +++ b/arch/arm/boot/dts/emev2.dtsi @@ -195,7 +195,7 @@ clock-names = "sclk"; }; - pfc: pin-controller@e0140200 { + pfc: pinctrl@e0140200 { compatible = "renesas,pfc-emev2"; reg = <0xe0140200 0x100>; }; diff --git a/arch/arm/boot/dts/ethernut5.dts b/arch/arm/boot/dts/ethernut5.dts index 052a52f947ce..ad7a0850252a 100644 --- a/arch/arm/boot/dts/ethernut5.dts +++ b/arch/arm/boot/dts/ethernut5.dts @@ -15,7 +15,7 @@ bootargs = "console=ttyS0,115200 root=/dev/mtdblock0 rw rootfstype=jffs2"; }; - memory { + memory@20000000 { reg = <0x20000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi index 6c2f320be2f4..12887b3924af 100644 --- a/arch/arm/boot/dts/exynos3250-artik5.dtsi +++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi @@ -55,6 +55,10 @@ assigned-clock-rates = <6000000>; }; +&cmu { + clocks = <&xusbxti>; +}; + &cpu0 { cpu0-supply = <&buck2_reg>; }; diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts index ca29d7ed8216..c1a68e612037 100644 --- a/arch/arm/boot/dts/exynos3250-monk.dts +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -26,7 +26,7 @@ memory@40000000 { device_type = "memory"; - reg = <0x40000000 0x1ff00000>; + reg = <0x40000000 0x1ff00000>; }; firmware@205f000 { @@ -164,6 +164,10 @@ status = "okay"; }; +&cmu { + clocks = <&xusbxti>; +}; + &cpu0 { cpu0-supply = <&buck2_reg>; }; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index aba8350cfdaf..b55afaaa691e 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -30,7 +30,7 @@ memory@40000000 { device_type = "memory"; - reg = <0x40000000 0x1ff00000>; + reg = <0x40000000 0x1ff00000>; }; firmware@205f000 { @@ -205,6 +205,10 @@ status = "okay"; }; +&cmu { + clocks = <&xusbxti>; +}; + &cpu0 { cpu0-supply = <&buck2_reg>; }; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index d3fb45a56527..a1e93fb7f694 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -97,33 +97,25 @@ }; }; - fixed-rate-clocks { - #address-cells = <1>; - #size-cells = <0>; - - xusbxti: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - clock-frequency = <0>; - #clock-cells = <0>; - clock-output-names = "xusbxti"; - }; + xusbxti: clock-0 { + compatible = "fixed-clock"; + clock-frequency = <0>; + #clock-cells = <0>; + clock-output-names = "xusbxti"; + }; - xxti: clock@1 { - compatible = "fixed-clock"; - reg = <1>; - clock-frequency = <0>; - #clock-cells = <0>; - clock-output-names = "xxti"; - }; + xxti: clock-1 { + compatible = "fixed-clock"; + clock-frequency = <0>; + #clock-cells = <0>; + clock-output-names = "xxti"; + }; - xtcxo: clock@2 { - compatible = "fixed-clock"; - reg = <2>; - clock-frequency = <0>; - #clock-cells = <0>; - clock-output-names = "xtcxo"; - }; + xtcxo: clock-2 { + compatible = "fixed-clock"; + clock-frequency = <0>; + #clock-cells = <0>; + clock-output-names = "xtcxo"; }; pmu { @@ -362,7 +354,7 @@ }; hsotg: hsotg@12480000 { - compatible = "samsung,s3c6400-hsotg", "snps,dwc2"; + compatible = "samsung,s3c6400-hsotg"; reg = <0x12480000 0x20000>; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_USBOTG>; diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts index 6d0c04d77a39..5370ee477186 100644 --- a/arch/arm/boot/dts/exynos4210-i9100.dts +++ b/arch/arm/boot/dts/exynos4210-i9100.dts @@ -123,7 +123,7 @@ reset-gpios = <&gpl1 2 GPIO_ACTIVE_LOW>; }; - i2c_max17042_fuel: i2c-gpio { + i2c_max17042_fuel: i2c-gpio-0 { compatible = "i2c-gpio"; #address-cells = <1>; #size-cells = <0>; @@ -147,7 +147,7 @@ }; }; - spi-lcd { + spi-3 { compatible = "spi-gpio"; #address-cells = <1>; #size-cells = <0>; @@ -209,20 +209,12 @@ compatible = "samsung,clock-xusbxti"; clock-frequency = <24000000>; }; - }; - thermal-zones { - cpu_thermal: cpu-thermal { - cooling-maps { - map0 { - /* Corresponds to 800MHz */ - cooling-device = <&cpu0 2 2>; - }; - map1 { - /* Corresponds to 200MHz */ - cooling-device = <&cpu0 4 4>; - }; - }; + pmic_ap_clk: pmic-ap-clk { + /* Workaround for missing clock on max8997 PMIC */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; }; }; }; @@ -235,6 +227,19 @@ cpu0-supply = <&varm_breg>; }; +&cpu_thermal { + cooling-maps { + map0 { + /* Corresponds to 800MHz */ + cooling-device = <&cpu0 2 2>; + }; + map1 { + /* Corresponds to 200MHz */ + cooling-device = <&cpu0 4 4>; + }; + }; +}; + &ehci { status = "okay"; @@ -304,8 +309,6 @@ status = "okay"; mali-supply = <&vg3d_breg>; - regulator-microvolt-offset = <50000>; - regulator-microsecs-delay = <50>; }; &hsotg { @@ -524,6 +527,7 @@ regulator-name = "G3D_1.1V"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1200000>; + regulator-microvolt-offset = <50000>; regulator-always-on; }; @@ -569,6 +573,16 @@ regulator-max-microvolt = <4100000>; regulator-always-on; }; + + EN32KHZ_AP { + regulator-name = "EN32KHZ_AP"; + regulator-always-on; + }; + + EN32KHZ_CP { + regulator-name = "EN32KHZ_CP"; + regulator-always-on; + }; }; }; }; @@ -667,7 +681,7 @@ samsung,pin-val = <0>; }; - mag_mhl_gpio: mag-mhl-gpio { + mag_mhl_gpio: mag-mhl { samsung,pins = "gpd0-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; @@ -689,6 +703,12 @@ }; }; +&rtc { + status = "okay"; + clocks = <&clock CLK_RTC>, <&pmic_ap_clk>; + clock-names = "rtc", "rtc_src"; +}; + &sdhci_0 { status = "okay"; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index 890525b10d22..7d2cfbafefb2 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -100,6 +100,13 @@ compatible = "samsung,clock-xusbxti"; clock-frequency = <24000000>; }; + + pmic_ap_clk: pmic-ap-clk { + /* Workaround for missing clock on max8997 PMIC */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; }; display-timings { @@ -122,6 +129,19 @@ cpu0-supply = <&buck1_reg>; }; +&cpu_thermal { + cooling-maps { + map0 { + /* Corresponds to 800MHz */ + cooling-device = <&cpu0 2 2>; + }; + map1 { + /* Corresponds to 200MHz */ + cooling-device = <&cpu0 4 4>; + }; + }; +}; + &exynos_usbphy { status = "okay"; }; @@ -286,6 +306,11 @@ regulator-boot-on; regulator-always-on; }; + + EN32KHZ_AP { + regulator-name = "EN32KHZ_AP"; + regulator-always-on; + }; }; }; }; @@ -331,6 +356,8 @@ &rtc { status = "okay"; + clocks = <&clock CLK_RTC>, <&pmic_ap_clk>; + clock-names = "rtc", "rtc_src"; }; &tmu { diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index 77fc11e593ad..c5609afa6101 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -40,6 +40,26 @@ compatible = "samsung,clock-xusbxti"; clock-frequency = <24000000>; }; + + pmic_ap_clk: pmic-ap-clk { + /* Workaround for missing clock on PMIC */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; +}; + +&cpu_thermal { + cooling-maps { + map0 { + /* Corresponds to 800MHz */ + cooling-device = <&cpu0 2 2>; + }; + map1 { + /* Corresponds to 200MHz */ + cooling-device = <&cpu0 4 4>; + }; }; }; @@ -148,6 +168,11 @@ }; }; +&rtc { + clocks = <&clock CLK_RTC>, <&pmic_ap_clk>; + clock-names = "rtc", "rtc_src"; +}; + &sdhci_2 { bus-width = <4>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 5cc96f04a4fa..a226bec56a45 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -132,23 +132,14 @@ compatible = "samsung,clock-xusbxti"; clock-frequency = <24000000>; }; - }; - thermal-zones { - cpu_thermal: cpu-thermal { - cooling-maps { - map0 { - /* Corresponds to 800MHz at freq_table */ - cooling-device = <&cpu0 2 2>, <&cpu1 2 2>; - }; - map1 { - /* Corresponds to 200MHz at freq_table */ - cooling-device = <&cpu0 4 4>, <&cpu1 4 4>; - }; - }; + pmic_ap_clk: pmic-ap-clk { + /* Workaround for missing clock on max8997 PMIC */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; }; }; - }; &camera { @@ -161,6 +152,19 @@ cpu0-supply = <&varm_breg>; }; +&cpu_thermal { + cooling-maps { + map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 2 2>, <&cpu1 2 2>; + }; + map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 4 4>, <&cpu1 4 4>; + }; + }; +}; + &dsi_0 { vddcore-supply = <&vusb_reg>; vddio-supply = <&vmipi_reg>; @@ -314,140 +318,156 @@ regulators { valive_reg: LDO2 { - regulator-name = "VALIVE_1.1V_C210"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; + regulator-name = "VALIVE_1.1V_C210"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; }; vusb_reg: LDO3 { - regulator-name = "VUSB_1.1V_C210"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; + regulator-name = "VUSB_1.1V_C210"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; }; vmipi_reg: LDO4 { - regulator-name = "VMIPI_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-name = "VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; }; vpda_reg: LDO6 { - regulator-name = "VCC_1.8V_PDA"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; + regulator-name = "VCC_1.8V_PDA"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; }; vcam_reg: LDO7 { - regulator-name = "CAM_ISP_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-name = "CAM_ISP_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; }; vusbdac_reg: LDO8 { - regulator-name = "VUSB+VDAC_3.3V_C210"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + regulator-name = "VUSB+VDAC_3.3V_C210"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; }; vccpda_reg: LDO9 { - regulator-name = "VCC_2.8V_PDA"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; + regulator-name = "VCC_2.8V_PDA"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; }; vpll_reg: LDO10 { - regulator-name = "VPLL_1.1V_C210"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; + regulator-name = "VPLL_1.1V_C210"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; }; vtcam_reg: LDO12 { - regulator-name = "VT_CAM_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-name = "VT_CAM_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; }; vcclcd_reg: LDO13 { - regulator-name = "VCC_3.3V_LCD"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + regulator-name = "VCC_3.3V_LCD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; }; vlcd_reg: LDO15 { - regulator-name = "VLCD_2.2V"; - regulator-min-microvolt = <2200000>; - regulator-max-microvolt = <2200000>; + regulator-name = "VLCD_2.2V"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; }; camsensor_reg: LDO16 { - regulator-name = "CAM_SENSOR_IO_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-name = "CAM_SENSOR_IO_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; }; tflash_reg: LDO17 { - regulator-name = "VTF_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; + regulator-name = "VTF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; }; vddq_reg: LDO21 { - regulator-name = "VDDQ_M1M2_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; + regulator-name = "VDDQ_M1M2_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; }; varm_breg: BUCK1 { - regulator-name = "VARM_1.2V_C210"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; + regulator-name = "VARM_1.2V_C210"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; }; vint_breg: BUCK2 { - regulator-name = "VINT_1.1V_C210"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; + regulator-name = "VINT_1.1V_C210"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; }; camisp_breg: BUCK4 { - regulator-name = "CAM_ISP_CORE_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; + regulator-name = "CAM_ISP_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; }; vmem_breg: BUCK5 { - regulator-name = "VMEM_1.2V_C210"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; + regulator-name = "VMEM_1.2V_C210"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; }; vccsub_breg: BUCK7 { - regulator-name = "VCC_SUB_2.0V"; - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <2000000>; - regulator-always-on; + regulator-name = "VCC_SUB_2.0V"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; }; safe1_sreg: ESAFEOUT1 { - regulator-name = "SAFEOUT1"; + regulator-name = "SAFEOUT1"; }; safe2_sreg: ESAFEOUT2 { - regulator-name = "SAFEOUT2"; - regulator-boot-on; + regulator-name = "SAFEOUT2"; + regulator-boot-on; + }; + + EN32KHZ_AP { + regulator-name = "EN32KHZ_AP"; + regulator-always-on; + }; + + EN32KHZ_CP { + regulator-name = "EN32KHZ_CP"; + regulator-always-on; }; }; }; }; +&rtc { + status = "okay"; + clocks = <&clock CLK_RTC>, <&pmic_ap_clk>; + clock-names = "rtc", "rtc_src"; +}; + &sdhci_0 { bus-width = <8>; non-removable; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 99ce53b120ac..08284e8f3624 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -39,10 +39,17 @@ compatible = "samsung,clock-xusbxti"; clock-frequency = <24000000>; }; + + pmic_ap_clk: pmic-ap-clk { + /* Workaround for missing clock on PMIC */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; }; vemmc_reg: voltage-regulator { - compatible = "regulator-fixed"; + compatible = "regulator-fixed"; regulator-name = "VMEM_VDD_2_8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; @@ -104,7 +111,7 @@ }; tsp_reg: voltage-regulator { - compatible = "regulator-fixed"; + compatible = "regulator-fixed"; regulator-name = "TSP_2_8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; @@ -112,13 +119,13 @@ enable-active-high; }; - spi-lcd { + spi-3 { compatible = "spi-gpio"; #address-cells = <1>; #size-cells = <0>; - gpio-sck = <&gpy3 1 GPIO_ACTIVE_HIGH>; - gpio-mosi = <&gpy3 3 GPIO_ACTIVE_HIGH>; + sck-gpios = <&gpy3 1 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpy3 3 GPIO_ACTIVE_HIGH>; num-chipselects = <1>; cs-gpios = <&gpy4 3 GPIO_ACTIVE_LOW>; @@ -192,6 +199,19 @@ cpu0-supply = <&vdd_arm_reg>; }; +&cpu_thermal { + cooling-maps { + map0 { + /* Corresponds to 800MHz */ + cooling-device = <&cpu0 2 2>; + }; + map1 { + /* Corresponds to 200MHz */ + cooling-device = <&cpu0 4 4>; + }; + }; +}; + &ehci { status = "okay"; phys = <&exynos_usbphy 1>; @@ -537,6 +557,12 @@ status = "okay"; }; +&rtc { + status = "okay"; + clocks = <&clock CLK_RTC>, <&pmic_ap_clk>; + clock-names = "rtc", "rtc_src"; +}; + &sdhci_0 { bus-width = <8>; non-removable; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 33435ce79ce4..fddc661ded28 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -102,6 +102,8 @@ reg = <0x10502000 0x1000>; cache-unified; cache-level = <2>; + prefetch-data = <1>; + prefetch-instr = <1>; arm,tag-latency = <2 2 1>; arm,data-latency = <2 2 1>; }; @@ -363,26 +365,24 @@ }; }; }; +}; - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tmu 0>; - - trips { - cpu_alert0: cpu-alert-0 { - temperature = <85000>; /* millicelsius */ - }; - cpu_alert1: cpu-alert-1 { - temperature = <100000>; /* millicelsius */ - }; - cpu_alert2: cpu-alert-2 { - temperature = <110000>; /* millicelsius */ - }; - }; - }; - }; +&cpu_alert0 { + temperature = <85000>; /* millicelsius */ +}; + +&cpu_alert1 { + temperature = <100000>; /* millicelsius */ +}; + +&cpu_alert2 { + temperature = <110000>; /* millicelsius */ +}; + +&cpu_thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tmu 0>; }; &gic { diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi index 53b3ca3effab..89ed81fb348d 100644 --- a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi +++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi @@ -33,7 +33,7 @@ }; }; - lcd_vdd3_reg: voltage-regulator-7 { + lcd_vdd3_reg: voltage-regulator-10 { compatible = "regulator-fixed"; regulator-name = "LCD_VDD_2.2V"; regulator-min-microvolt = <2200000>; @@ -42,7 +42,7 @@ enable-active-high; }; - ps_als_reg: voltage-regulator-8 { + ps_als_reg: voltage-regulator-11 { compatible = "regulator-fixed"; regulator-name = "LED_A_3.0V"; regulator-min-microvolt = <3000000>; @@ -171,6 +171,44 @@ status = "okay"; }; +&sound { + samsung,audio-routing = + "HP", "HPOUT1L", + "HP", "HPOUT1R", + + "SPK", "SPKOUTLN", + "SPK", "SPKOUTLP", + "SPK", "SPKOUTRN", + "SPK", "SPKOUTRP", + + "RCV", "HPOUT2N", + "RCV", "HPOUT2P", + + "HDMI", "LINEOUT1N", + "HDMI", "LINEOUT1P", + + "LINE", "LINEOUT2N", + "LINE", "LINEOUT2P", + + "IN1LP", "MICBIAS1", + "IN1LN", "MICBIAS1", + "Main Mic", "MICBIAS1", + + "IN1RP", "Sub Mic", + "IN1RN", "Sub Mic", + + "IN2LP:VXRN", "MICBIAS2", + "Headset Mic", "MICBIAS2", + + "IN2RN", "FM In", + "IN2RP:VXRP", "FM In"; +}; + +&submic_bias_reg { + gpio = <&gpf2 0 GPIO_ACTIVE_HIGH>; + enable-active-high; +}; + &touchkey_reg { gpio = <&gpm0 0 GPIO_ACTIVE_HIGH>; status = "okay"; diff --git a/arch/arm/boot/dts/exynos4412-i9300.dts b/arch/arm/boot/dts/exynos4412-i9300.dts index f8125a945f8d..07fbcf845c49 100644 --- a/arch/arm/boot/dts/exynos4412-i9300.dts +++ b/arch/arm/boot/dts/exynos4412-i9300.dts @@ -17,6 +17,10 @@ memory@40000000 { device_type = "memory"; - reg = <0x40000000 0x40000000>; + reg = <0x40000000 0x40000000>; }; }; + +&sound { + fm-sel-gpios = <&gpl0 3 GPIO_ACTIVE_HIGH>; +}; diff --git a/arch/arm/boot/dts/exynos4412-i9305.dts b/arch/arm/boot/dts/exynos4412-i9305.dts index 54a2a55dbf70..6bc3d897f432 100644 --- a/arch/arm/boot/dts/exynos4412-i9305.dts +++ b/arch/arm/boot/dts/exynos4412-i9305.dts @@ -10,7 +10,7 @@ memory@40000000 { device_type = "memory"; - reg = <0x40000000 0x80000000>; + reg = <0x40000000 0x80000000>; }; }; diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi index 2c8111c6b065..7e7c243ff196 100644 --- a/arch/arm/boot/dts/exynos4412-midas.dtsi +++ b/arch/arm/boot/dts/exynos4412-midas.dtsi @@ -37,12 +37,12 @@ fixed-rate-clocks { xxti { - compatible = "samsung,clock-xxti", "fixed-clock"; + compatible = "samsung,clock-xxti"; clock-frequency = <0>; }; xusbxti { - compatible = "samsung,clock-xusbxti", "fixed-clock"; + compatible = "samsung,clock-xusbxti"; clock-frequency = <24000000>; }; }; @@ -102,6 +102,30 @@ status = "disabled"; }; + vbatt_reg: voltage-regulator-7 { + compatible = "regulator-fixed"; + regulator-name = "VBATT"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + mic_bias_reg: voltage-regulator-8 { + compatible = "regulator-fixed"; + regulator-name = "MICBIAS_LDO_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpf1 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + submic_bias_reg: voltage-regulator-9 { + compatible = "regulator-fixed"; + regulator-name = "SUB_MICBIAS_LDO_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -266,16 +290,18 @@ clock-names = "ext_clock"; }; - sound { - compatible = "samsung,trats2-audio"; - samsung,i2s-controller = <&i2s0>; - samsung,model = "Trats2"; - samsung,audio-codec = <&wm1811>; - samsung,audio-routing = - "SPK", "SPKOUTLN", - "SPK", "SPKOUTLP", - "SPK", "SPKOUTRN", - "SPK", "SPKOUTRP"; + sound: sound { + compatible = "samsung,midas-audio"; + model = "Midas"; + mic-bias-supply = <&mic_bias_reg>; + submic-bias-supply = <&submic_bias_reg>; + + cpu { + sound-dai = <&i2s0 0>; + }; + codec { + sound-dai = <&wm1811>; + }; }; thermistor-ap { @@ -293,25 +319,6 @@ pulldown-ohm = <100000>; /* 100K */ io-channels = <&adc 2>; /* Battery temperature */ }; - - thermal-zones { - cpu_thermal: cpu-thermal { - cooling-maps { - map0 { - /* Corresponds to 800MHz at freq_table */ - cooling-device = <&cpu0 7 7>, <&cpu1 7 7>, - <&cpu2 7 7>, <&cpu3 7 7>; - }; - map1 { - /* Corresponds to 200MHz at freq_table */ - cooling-device = <&cpu0 13 13>, - <&cpu1 13 13>, - <&cpu2 13 13>, - <&cpu3 13 13>; - }; - }; - }; - }; }; &adc { @@ -380,6 +387,21 @@ cpu0-supply = <&buck2_reg>; }; +&cpu_thermal { + cooling-maps { + map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 7 7>, <&cpu1 7 7>, + <&cpu2 7 7>, <&cpu3 7 7>; + }; + map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 13 13>, <&cpu1 13 13>, + <&cpu2 13 13>, <&cpu3 13 13>; + }; + }; +}; + &csis_0 { status = "okay"; vddcore-supply = <&ldo8_reg>; @@ -597,11 +619,37 @@ wm1811: wm1811@1a { compatible = "wlf,wm1811"; reg = <0x1a>; - clocks = <&pmu_system_controller 0>; - clock-names = "MCLK1"; - DCVDD-supply = <&ldo3_reg>; + clocks = <&pmu_system_controller 0>, + <&max77686 MAX77686_CLK_PMIC>; + clock-names = "MCLK1", "MCLK2"; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gpx3>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH>; + + gpio-controller; + #gpio-cells = <2>; + #sound-dai-cells = <0>; + + wlf,gpio-cfg = <0x3 0x0 0x0 0x0 0x0 0x0 + 0x0 0x8000 0x0 0x0 0x0>; + wlf,micbias-cfg = <0x2f 0x2b>; + + wlf,lineout1-feedback; + wlf,lineout1-se; + wlf,lineout2-se; + wlf,ldoena-always-driven; + + AVDD2-supply = <&vbatt_reg>; DBVDD1-supply = <&ldo3_reg>; + DBVDD2-supply = <&vbatt_reg>; + DBVDD3-supply = <&vbatt_reg>; + DCVDD-supply = <&ldo3_reg>; + CPVDD-supply = <&vbatt_reg>; + SPKVDD1-supply = <&vbatt_reg>; + SPKVDD2-supply = <&vbatt_reg>; wlf,ldo1ena = <&gpj0 4 0>; + wlf,ldo2ena = <&gpj0 4 0>; }; }; diff --git a/arch/arm/boot/dts/exynos4412-n710x.dts b/arch/arm/boot/dts/exynos4412-n710x.dts index 4189e1fb204c..a47b7f35fc80 100644 --- a/arch/arm/boot/dts/exynos4412-n710x.dts +++ b/arch/arm/boot/dts/exynos4412-n710x.dts @@ -8,12 +8,12 @@ memory@40000000 { device_type = "memory"; - reg = <0x40000000 0x80000000>; + reg = <0x40000000 0x80000000>; }; /* bootargs are passed in by bootloader */ - cam_vdda_reg: voltage-regulator-7 { + cam_vdda_reg: voltage-regulator-10 { compatible = "regulator-fixed"; regulator-name = "CAM_SENSOR_CORE_1.2V"; regulator-min-microvolt = <1200000>; @@ -74,6 +74,41 @@ status = "okay"; }; +&sound { + samsung,audio-routing = + "HP", "HPOUT1L", + "HP", "HPOUT1R", + + "SPK", "SPKOUTLN", + "SPK", "SPKOUTLP", + + "RCV", "HPOUT2N", + "RCV", "HPOUT2P", + + "HDMI", "LINEOUT1N", + "HDMI", "LINEOUT1P", + + "LINE", "LINEOUT2N", + "LINE", "LINEOUT2P", + + "IN1LP", "MICBIAS2", + "IN1LN", "MICBIAS2", + "Headset Mic", "MICBIAS2", + + "IN1RP", "Sub Mic", + "IN1RN", "Sub Mic", + + "IN2LP:VXRN", "Main Mic", + "IN2LN", "Main Mic", + + "IN2RN", "FM In", + "IN2RP:VXRP", "FM In"; +}; + +&submic_bias_reg { + regulator-always-on; +}; + &touchkey_reg { gpio = <&gpm0 5 GPIO_ACTIVE_HIGH>; status = "okay"; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index a5c1ce1e396c..ab291cec650a 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -66,25 +66,6 @@ clock-frequency = <24000000>; }; }; - - thermal-zones { - cpu_thermal: cpu-thermal { - cooling-maps { - cooling_map0: map0 { - /* Corresponds to 800MHz at freq_table */ - cooling-device = <&cpu0 7 7>, <&cpu1 7 7>, - <&cpu2 7 7>, <&cpu3 7 7>; - }; - cooling_map1: map1 { - /* Corresponds to 200MHz at freq_table */ - cooling-device = <&cpu0 13 13>, - <&cpu1 13 13>, - <&cpu2 13 13>, - <&cpu3 13 13>; - }; - }; - }; - }; }; &bus_dmc { @@ -141,6 +122,7 @@ }; &clock { + clocks = <&clock CLK_XUSBXTI>; assigned-clocks = <&clock CLK_FOUT_EPLL>; assigned-clock-rates = <45158401>; }; @@ -174,6 +156,21 @@ }; }; +&cpu_thermal { + cooling-maps { + cooling_map0: map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 7 7>, <&cpu1 7 7>, + <&cpu2 7 7>, <&cpu3 7 7>; + }; + cooling_map1: map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 13 13>, <&cpu1 13 13>, + <&cpu2 13 13>, <&cpu3 13 13>; + }; + }; +}; + &pinctrl_1 { gpio_power_key: power_key { samsung,pins = "gpx1-3"; diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts index 8ff243ba4542..b8549d846f86 100644 --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts @@ -37,31 +37,6 @@ #cooling-cells = <2>; cooling-levels = <0 102 170 230>; }; - - thermal-zones { - cpu_thermal: cpu-thermal { - cooling-maps { - map0 { - trip = <&cpu_alert1>; - cooling-device = <&cpu0 9 9>, <&cpu1 9 9>, - <&cpu2 9 9>, <&cpu3 9 9>, - <&fan0 1 2>; - }; - map1 { - trip = <&cpu_alert2>; - cooling-device = <&cpu0 15 15>, - <&cpu1 15 15>, - <&cpu2 15 15>, - <&cpu3 15 15>, - <&fan0 2 3>; - }; - map2 { - trip = <&cpu_alert0>; - cooling-device = <&fan0 0 1>; - }; - }; - }; - }; }; &adc { @@ -76,6 +51,27 @@ regulator-max-microvolt = <3300000>; }; +&cpu_thermal { + cooling-maps { + map0 { + trip = <&cpu_alert1>; + cooling-device = <&cpu0 9 9>, <&cpu1 9 9>, + <&cpu2 9 9>, <&cpu3 9 9>, + <&fan0 1 2>; + }; + map1 { + trip = <&cpu_alert2>; + cooling-device = <&cpu0 15 15>, <&cpu1 15 15>, + <&cpu2 15 15>, <&cpu3 15 15>, + <&fan0 2 3>; + }; + map2 { + trip = <&cpu_alert0>; + cooling-device = <&fan0 0 1>; + }; + }; +}; + &hdmicec { needs-hpd; }; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index 8b11ad391252..c2e793b69e7d 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "exynos4412.dtsi" +#include <dt-bindings/clock/samsung,s2mps11.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include "exynos-mfc-reserved-memory.dtsi" @@ -74,6 +75,21 @@ cpu0-supply = <&buck2_reg>; }; +&cpu_thermal { + cooling-maps { + cooling_map0: map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 7 7>, <&cpu1 7 7>, + <&cpu2 7 7>, <&cpu3 7 7>; + }; + cooling_map1: map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 13 13>, <&cpu1 13 13>, + <&cpu2 13 13>, <&cpu3 13 13>; + }; + }; +}; + &exynos_usbphy { status = "okay"; }; @@ -129,6 +145,13 @@ <1200000>, <1200000>, <1200000>, <1200000>; + s5m8767_osc: clocks { + compatible = "samsung,s5m8767-clk"; + #clock-cells = <1>; + clock-output-names = "s5m8767_ap", "s5m8767_cp", + "s5m8767_bt"; + }; + regulators { ldo1_reg: LDO1 { regulator-name = "VDD_ALIVE"; @@ -499,6 +522,8 @@ &rtc { status = "okay"; + clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>; + clock-names = "rtc", "rtc_src"; }; &sdhci_2 { diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts index e70fb6e601f0..49971203a8aa 100644 --- a/arch/arm/boot/dts/exynos4412-smdk4412.dts +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts @@ -37,6 +37,28 @@ compatible = "samsung,clock-xusbxti"; clock-frequency = <24000000>; }; + + pmic_ap_clk: pmic-ap-clk { + /* Workaround for missing clock on PMIC */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; +}; + +&cpu_thermal { + cooling-maps { + cooling_map0: map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 7 7>, <&cpu1 7 7>, + <&cpu2 7 7>, <&cpu3 7 7>; + }; + cooling_map1: map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 13 13>, <&cpu1 13 13>, + <&cpu2 13 13>, <&cpu3 13 13>; + }; }; }; @@ -127,6 +149,11 @@ }; }; +&rtc { + clocks = <&clock CLK_RTC>, <&pmic_ap_clk>; + clock-names = "rtc", "rtc_src"; +}; + &sdhci_2 { bus-width = <4>; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>; diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts b/arch/arm/boot/dts/exynos4412-tiny4412.dts index 3a91de8a8082..017b26108bb0 100644 --- a/arch/arm/boot/dts/exynos4412-tiny4412.dts +++ b/arch/arm/boot/dts/exynos4412-tiny4412.dts @@ -65,6 +65,13 @@ compatible = "samsung,clock-xusbxti"; clock-frequency = <24000000>; }; + + pmic_ap_clk: pmic-ap-clk { + /* Workaround for missing clock on PMIC */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; }; panel { @@ -78,6 +85,21 @@ }; }; +&cpu_thermal { + cooling-maps { + cooling_map0: map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 7 7>, <&cpu1 7 7>, + <&cpu2 7 7>, <&cpu3 7 7>; + }; + cooling_map1: map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 13 13>, <&cpu1 13 13>, + <&cpu2 13 13>, <&cpu3 13 13>; + }; + }; +}; + &fimd { pinctrl-0 = <&lcd_clk>, <&lcd_data24>; pinctrl-names = "default"; @@ -95,6 +117,8 @@ &rtc { status = "okay"; + clocks = <&clock CLK_RTC>, <&pmic_ap_clk>; + clock-names = "rtc", "rtc_src"; }; &sdhci_2 { diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index aac533933c61..7b447b63007e 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -18,7 +18,7 @@ memory@40000000 { device_type = "memory"; - reg = <0x40000000 0x40000000>; + reg = <0x40000000 0x40000000>; }; chosen { diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 7002832eb4c0..e76881dc0014 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -76,7 +76,7 @@ }; }; - cpu0_opp_table: opp_table0 { + cpu0_opp_table: opp-table0 { compatible = "operating-points-v2"; opp-shared; @@ -218,6 +218,8 @@ reg = <0x10502000 0x1000>; cache-unified; cache-level = <2>; + prefetch-data = <1>; + prefetch-instr = <1>; arm,tag-latency = <2 2 1>; arm,data-latency = <3 2 1>; arm,double-linefill = <1>; @@ -400,7 +402,7 @@ status = "disabled"; }; - bus_dmc_opp_table: opp_table1 { + bus_dmc_opp_table: opp-table1 { compatible = "operating-points-v2"; opp-shared; @@ -427,7 +429,7 @@ }; }; - bus_acp_opp_table: opp_table2 { + bus_acp_opp_table: opp-table2 { compatible = "operating-points-v2"; opp-shared; @@ -493,7 +495,7 @@ status = "disabled"; }; - bus_leftbus_opp_table: opp_table3 { + bus_leftbus_opp_table: opp-table3 { compatible = "operating-points-v2"; opp-shared; @@ -516,7 +518,7 @@ }; }; - bus_display_opp_table: opp_table4 { + bus_display_opp_table: opp-table4 { compatible = "operating-points-v2"; opp-shared; @@ -528,7 +530,7 @@ }; }; - bus_fsys_opp_table: opp_table5 { + bus_fsys_opp_table: opp-table5 { compatible = "operating-points-v2"; opp-shared; @@ -540,7 +542,7 @@ }; }; - bus_peri_opp_table: opp_table6 { + bus_peri_opp_table: opp-table6 { compatible = "operating-points-v2"; opp-shared; @@ -732,7 +734,7 @@ "pmu"; operating-points-v2 = <&gpu_opp_table>; - gpu_opp_table: opp_table { + gpu_opp_table: opp-table { compatible = "operating-points-v2"; opp-160000000 { diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi index 22eb951c614c..9ce9fb3fc190 100644 --- a/arch/arm/boot/dts/exynos5.dtsi +++ b/arch/arm/boot/dts/exynos5.dtsi @@ -86,7 +86,7 @@ }; gic: interrupt-controller@10481000 { - compatible = "arm,gic-400", "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + compatible = "arm,gic-400", "arm,cortex-a15-gic"; #interrupt-cells = <3>; interrupt-controller; reg = <0x10481000 0x1000>, @@ -211,13 +211,13 @@ }; prng: rng@10830400 { - compatible = "samsung,exynos5250-prng"; - reg = <0x10830400 0x200>; + compatible = "samsung,exynos5250-prng"; + reg = <0x10830400 0x200>; }; trng: rng@10830600 { - compatible = "samsung,exynos5250-trng"; - reg = <0x10830600 0x100>; + compatible = "samsung,exynos5250-trng"; + reg = <0x10830600 0x100>; }; g2d: g2d@10850000 { diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 59872d83da6e..79546f11af26 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -243,11 +243,11 @@ s5m8767,pmic-buck3-dvs-voltage = <1100000>; s5m8767,pmic-buck4-dvs-voltage = <1200000>; s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_HIGH>, - <&gpd1 1 GPIO_ACTIVE_HIGH>, - <&gpd1 2 GPIO_ACTIVE_HIGH>; + <&gpd1 1 GPIO_ACTIVE_HIGH>, + <&gpd1 2 GPIO_ACTIVE_HIGH>; s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>, - <&gpx2 4 GPIO_ACTIVE_HIGH>, - <&gpx2 5 GPIO_ACTIVE_HIGH>; + <&gpx2 4 GPIO_ACTIVE_HIGH>, + <&gpx2 5 GPIO_ACTIVE_HIGH>; s5m8767_osc: clocks { compatible = "samsung,s5m8767-clk"; @@ -542,12 +542,6 @@ status = "okay"; samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <40000>; - samsung,i2c-slave-addr = <0x38>; - - sata_phy_i2c:sata-phy@38 { - compatible = "samsung,exynos-sataphy-i2c"; - reg = <0x38>; - }; }; &i2s0 { @@ -619,12 +613,16 @@ samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>; }; +&sata_phy_i2c { + status = "okay"; +}; + &soc { /* * For unknown reasons HDMI-DDC does not work with Exynos I2C * controllers. Lets use software I2C over GPIO pins as a workaround. */ - i2c_ddc: i2c-gpio { + i2c_ddc: i2c-10 { pinctrl-names = "default"; pinctrl-0 = <&i2c2_gpio_bus>; status = "okay"; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 5c42df024adf..186790f39e4d 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -7,6 +7,7 @@ */ /dts-v1/; +#include <dt-bindings/clock/maxim,max77686.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include "exynos5250.dtsi" @@ -129,13 +130,14 @@ reg = <0x50>; }; - max77686@9 { + max77686: pmic@9 { compatible = "maxim,max77686"; reg = <0x09>; interrupt-parent = <&gpx3>; interrupts = <2 IRQ_TYPE_NONE>; pinctrl-names = "default"; pinctrl-0 = <&max77686_irq>; + #clock-cells = <1>; wakeup-source; voltage-regulators { @@ -324,12 +326,6 @@ status = "okay"; samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <40000>; - samsung,i2c-slave-addr = <0x38>; - - sata_phy_i2c: sata-phy@38 { - compatible = "samsung,exynos-sataphy-i2c"; - reg = <0x38>; - }; }; &i2s0 { @@ -368,6 +364,8 @@ &rtc { status = "okay"; + clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>; + clock-names = "rtc", "rtc_src"; }; &sata { @@ -379,6 +377,10 @@ samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>; }; +&sata_phy_i2c { + status = "okay"; +}; + &spi_1 { status = "okay"; cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index 3d501926c227..a92ade33779c 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -7,6 +7,7 @@ */ /dts-v1/; +#include <dt-bindings/clock/samsung,s2mps11.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/input.h> @@ -114,12 +115,12 @@ wakeup-source; s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>, /* DVS1 */ - <&gpd1 1 GPIO_ACTIVE_LOW>, /* DVS2 */ - <&gpd1 2 GPIO_ACTIVE_LOW>; /* DVS3 */ + <&gpd1 1 GPIO_ACTIVE_LOW>, /* DVS2 */ + <&gpd1 2 GPIO_ACTIVE_LOW>; /* DVS3 */ s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, /* SET1 */ - <&gpx2 4 GPIO_ACTIVE_LOW>, /* SET2 */ - <&gpx2 5 GPIO_ACTIVE_LOW>; /* SET3 */ + <&gpx2 4 GPIO_ACTIVE_LOW>, /* SET2 */ + <&gpx2 5 GPIO_ACTIVE_LOW>; /* SET3 */ /* * The following arrays of DVS voltages are not used, since we are @@ -127,26 +128,26 @@ * to please the driver. */ s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>, - <1250000>, <1200000>, - <1150000>, <1100000>, - <1000000>, <950000>; + <1250000>, <1200000>, + <1150000>, <1100000>, + <1000000>, <950000>; s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>, - <1100000>, <1100000>, - <1000000>, <1000000>, - <1000000>, <1000000>; + <1100000>, <1100000>, + <1000000>, <1000000>, + <1000000>, <1000000>; s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>, - <1200000>, <1200000>, - <1200000>, <1200000>, - <1200000>, <1200000>; + <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>; - clocks { + s5m8767_osc: clocks { compatible = "samsung,s5m8767-clk"; #clock-cells = <1>; clock-output-names = "en32khz_ap", - "en32khz_cp", - "en32khz_bt"; + "en32khz_cp", + "en32khz_bt"; }; regulators { @@ -456,7 +457,7 @@ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; - dp_hpd_gpio: dp-hpd-gpio { + dp_hpd_gpio: dp-hpd { samsung,pins = "gpc3-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; @@ -522,6 +523,12 @@ }; }; +&rtc { + status = "okay"; + clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>; + clock-names = "rtc", "rtc_src"; +}; + &sd1_bus4 { samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index e3dbe4166836..bd2d8835dd36 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -330,7 +330,7 @@ power-domains = <&pd_g3d>; status = "disabled"; - gpu_opp_table: gpu-opp-table { + gpu_opp_table: opp-table { compatible = "operating-points-v2"; opp-100000000 { @@ -473,6 +473,12 @@ clocks = <&clock CLK_SATA_PHYI2C>; clock-names = "i2c"; status = "disabled"; + + sata_phy_i2c: sata-phy-i2c@38 { + compatible = "samsung,exynos-sataphy-i2c"; + reg = <0x38>; + status = "disabled"; + }; }; spi_0: spi@12d20000 { @@ -723,7 +729,7 @@ #dma-requests = <1>; }; - gsc_0: gsc@13e00000 { + gsc_0: gsc@13e00000 { compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc"; reg = <0x13e00000 0x1000>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; @@ -733,7 +739,7 @@ iommus = <&sysmmu_gsc0>; }; - gsc_1: gsc@13e10000 { + gsc_1: gsc@13e10000 { compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc"; reg = <0x13e10000 0x1000>; interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; @@ -743,7 +749,7 @@ iommus = <&sysmmu_gsc1>; }; - gsc_2: gsc@13e20000 { + gsc_2: gsc@13e20000 { compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc"; reg = <0x13e20000 0x1000>; interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; @@ -753,7 +759,7 @@ iommus = <&sysmmu_gsc2>; }; - gsc_3: gsc@13e30000 { + gsc_3: gsc@13e30000 { compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc"; reg = <0x13e30000 0x1000>; interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; @@ -1085,26 +1091,6 @@ }; }; - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tmu 0>; - - cooling-maps { - map0 { - /* Corresponds to 800MHz at freq_table */ - cooling-device = <&cpu0 9 9>, <&cpu1 9 9>; - }; - map1 { - /* Corresponds to 200MHz at freq_table */ - cooling-device = <&cpu0 15 15>, - <&cpu1 15 15>; - }; - }; - }; - }; - timer { compatible = "arm,armv7-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, @@ -1120,6 +1106,24 @@ }; }; +&cpu_thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tmu 0>; + + cooling-maps { + map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 9 9>, <&cpu1 9 9>; + }; + map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 15 15>, + <&cpu1 15 15>; + }; + }; +}; + &dp { power-domains = <&pd_disp1>; clocks = <&clock CLK_DP>; diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi index 154df70128f3..973448c4ad93 100644 --- a/arch/arm/boot/dts/exynos5260.dtsi +++ b/arch/arm/boot/dts/exynos5260.dtsi @@ -162,10 +162,8 @@ }; gic: interrupt-controller@10481000 { - compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + compatible = "arm,gic-400", "arm,cortex-a15-gic"; #interrupt-cells = <3>; - #address-cells = <0>; - #size-cells = <0>; interrupt-controller; reg = <0x10481000 0x1000>, <0x10482000 0x2000>, diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts index 4f9297ae0763..75b4150c26d7 100644 --- a/arch/arm/boot/dts/exynos5410-odroidxu.dts +++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts @@ -109,10 +109,10 @@ assigned-clock-parents = <&clock CLK_FOUT_EPLL>, <&clock_audss EXYNOS_MOUT_AUDSS>; - assigned-clock-rates = <0>, - <0>, - <96000000>, - <19200000>; + assigned-clock-rates = <0>, + <0>, + <96000000>, + <19200000>; }; &cpu0_thermal { diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts index 5282b5deca86..2a3ade77a2de 100644 --- a/arch/arm/boot/dts/exynos5410-smdk5410.dts +++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts @@ -29,6 +29,13 @@ #clock-cells = <0>; }; + pmic_ap_clk: pmic-ap-clk { + /* Workaround for missing PMIC and its clock */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + firmware@2037000 { compatible = "samsung,secure-firmware"; reg = <0x02037000 0x1000>; @@ -79,6 +86,11 @@ }; }; +&rtc { + clocks = <&clock CLK_RTC>, <&pmic_ap_clk>; + clock-names = "rtc", "rtc_src"; +}; + &sromc { pinctrl-names = "default"; pinctrl-0 = <&srom_ctl>, <&srom_ebi>; diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi index abe75b9e39f5..60a87684b1af 100644 --- a/arch/arm/boot/dts/exynos5410.dtsi +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -238,16 +238,16 @@ #include "exynos5420-trip-points.dtsi" }; cpu1_thermal: cpu1-thermal { - thermal-sensors = <&tmu_cpu1>; - #include "exynos5420-trip-points.dtsi" + thermal-sensors = <&tmu_cpu1>; + #include "exynos5420-trip-points.dtsi" }; cpu2_thermal: cpu2-thermal { - thermal-sensors = <&tmu_cpu2>; - #include "exynos5420-trip-points.dtsi" + thermal-sensors = <&tmu_cpu2>; + #include "exynos5420-trip-points.dtsi" }; cpu3_thermal: cpu3-thermal { - thermal-sensors = <&tmu_cpu3>; - #include "exynos5420-trip-points.dtsi" + thermal-sensors = <&tmu_cpu3>; + #include "exynos5420-trip-points.dtsi" }; }; }; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 83fa800fa1eb..4e49d8095b29 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -9,6 +9,7 @@ /dts-v1/; #include "exynos5420.dtsi" #include "exynos5420-cpus.dtsi" +#include <dt-bindings/clock/samsung,s2mps11.h> #include <dt-bindings/gpio/gpio.h> / { @@ -401,6 +402,8 @@ &rtc { status = "okay"; + clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>; + clock-names = "rtc", "rtc_src"; }; &usbdrd_phy0 { diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index c76460b70532..83580f076a58 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -1199,20 +1199,20 @@ #include "exynos5420-trip-points.dtsi" }; cpu1_thermal: cpu1-thermal { - thermal-sensors = <&tmu_cpu1>; - #include "exynos5420-trip-points.dtsi" + thermal-sensors = <&tmu_cpu1>; + #include "exynos5420-trip-points.dtsi" }; cpu2_thermal: cpu2-thermal { - thermal-sensors = <&tmu_cpu2>; - #include "exynos5420-trip-points.dtsi" + thermal-sensors = <&tmu_cpu2>; + #include "exynos5420-trip-points.dtsi" }; cpu3_thermal: cpu3-thermal { - thermal-sensors = <&tmu_cpu3>; - #include "exynos5420-trip-points.dtsi" + thermal-sensors = <&tmu_cpu3>; + #include "exynos5420-trip-points.dtsi" }; gpu_thermal: gpu-thermal { - thermal-sensors = <&tmu_gpu>; - #include "exynos5420-trip-points.dtsi" + thermal-sensors = <&tmu_gpu>; + #include "exynos5420-trip-points.dtsi" }; }; }; diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi index afe090578e8f..b1cf9414ce17 100644 --- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi @@ -333,8 +333,8 @@ compatible = "samsung,K3QF2F20DB", "jedec,lpddr3"; density = <16384>; io-width = <32>; - #address-cells = <1>; - #size-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; tRFC-min-tck = <17>; tRRD-min-tck = <2>; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi index c3c2d85267da..b5ec4f47eb3a 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi @@ -29,30 +29,6 @@ "HiFi Playback", "Mixer DAI TX", "Mixer DAI RX", "HiFi Capture"; - assigned-clocks = <&clock CLK_MOUT_EPLL>, - <&clock CLK_MOUT_MAU_EPLL>, - <&clock CLK_MOUT_USER_MAU_EPLL>, - <&clock_audss EXYNOS_MOUT_AUDSS>, - <&clock_audss EXYNOS_MOUT_I2S>, - <&clock_audss EXYNOS_DOUT_SRP>, - <&clock_audss EXYNOS_DOUT_AUD_BUS>, - <&clock_audss EXYNOS_DOUT_I2S>; - - assigned-clock-parents = <&clock CLK_FOUT_EPLL>, - <&clock CLK_MOUT_EPLL>, - <&clock CLK_MOUT_MAU_EPLL>, - <&clock CLK_MAU_EPLL>, - <&clock_audss EXYNOS_MOUT_AUDSS>; - - assigned-clock-rates = <0>, - <0>, - <0>, - <0>, - <0>, - <196608001>, - <(196608002 / 2)>, - <196608000>; - cpu { sound-dai = <&i2s0 0>, <&i2s0 1>; }; @@ -62,13 +38,6 @@ }; }; -&clock_audss { - assigned-clocks = <&clock_audss EXYNOS_DOUT_SRP>, - <&clock CLK_FOUT_EPLL>; - assigned-clock-rates = <(196608000 / 256)>, - <196608000>; -}; - &hsi2c_5 { status = "okay"; max98090: max98090@10 { @@ -84,6 +53,31 @@ &i2s0 { status = "okay"; - assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>; - assigned-clock-parents = <&clock_audss EXYNOS_SCLK_I2S>; + assigned-clocks = <&clock CLK_MOUT_EPLL>, + <&clock CLK_MOUT_MAU_EPLL>, + <&clock CLK_MOUT_USER_MAU_EPLL>, + <&clock_audss EXYNOS_MOUT_AUDSS>, + <&clock_audss EXYNOS_MOUT_I2S>, + <&i2s0 CLK_I2S_RCLK_SRC>, + <&clock_audss EXYNOS_DOUT_SRP>, + <&clock_audss EXYNOS_DOUT_AUD_BUS>, + <&clock_audss EXYNOS_DOUT_I2S>; + + assigned-clock-parents = <&clock CLK_FOUT_EPLL>, + <&clock CLK_MOUT_EPLL>, + <&clock CLK_MOUT_MAU_EPLL>, + <&clock CLK_MAU_EPLL>, + <&clock_audss EXYNOS_MOUT_AUDSS>, + <&clock_audss EXYNOS_SCLK_I2S>; + + assigned-clock-rates = <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <196608001>, + <(196608002 / 2)>, + <196608000>; + }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu4.dts b/arch/arm/boot/dts/exynos5422-odroidxu4.dts index 892d389d6d09..ddd55d3bcadd 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu4.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu4.dts @@ -35,30 +35,6 @@ samsung,audio-routing = "I2S Playback", "Mixer DAI TX"; - assigned-clocks = <&clock CLK_MOUT_EPLL>, - <&clock CLK_MOUT_MAU_EPLL>, - <&clock CLK_MOUT_USER_MAU_EPLL>, - <&clock_audss EXYNOS_MOUT_AUDSS>, - <&clock_audss EXYNOS_MOUT_I2S>, - <&clock_audss EXYNOS_DOUT_SRP>, - <&clock_audss EXYNOS_DOUT_AUD_BUS>, - <&clock_audss EXYNOS_DOUT_I2S>; - - assigned-clock-parents = <&clock CLK_FOUT_EPLL>, - <&clock CLK_MOUT_EPLL>, - <&clock CLK_MOUT_MAU_EPLL>, - <&clock CLK_MAU_EPLL>, - <&clock_audss EXYNOS_MOUT_AUDSS>; - - assigned-clock-rates = <0>, - <0>, - <0>, - <0>, - <0>, - <196608001>, - <(196608002 / 2)>, - <196608000>; - cpu { sound-dai = <&i2s0 0>, <&i2s0 1>; }; @@ -69,17 +45,35 @@ }; }; -&clock_audss { - assigned-clocks = <&clock_audss EXYNOS_DOUT_SRP>, - <&clock CLK_FOUT_EPLL>; - assigned-clock-rates = <(196608000 / 256)>, - <196608000>; -}; - &i2s0 { status = "okay"; - assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>; - assigned-clock-parents = <&clock_audss EXYNOS_SCLK_I2S>; + + assigned-clocks = <&clock CLK_MOUT_EPLL>, + <&clock CLK_MOUT_MAU_EPLL>, + <&clock CLK_MOUT_USER_MAU_EPLL>, + <&clock_audss EXYNOS_MOUT_AUDSS>, + <&clock_audss EXYNOS_MOUT_I2S>, + <&i2s0 CLK_I2S_RCLK_SRC>, + <&clock_audss EXYNOS_DOUT_SRP>, + <&clock_audss EXYNOS_DOUT_AUD_BUS>, + <&clock_audss EXYNOS_DOUT_I2S>; + + assigned-clock-parents = <&clock CLK_FOUT_EPLL>, + <&clock CLK_MOUT_EPLL>, + <&clock CLK_MOUT_MAU_EPLL>, + <&clock CLK_MAU_EPLL>, + <&clock_audss EXYNOS_MOUT_AUDSS>, + <&clock_audss EXYNOS_SCLK_I2S>; + + assigned-clock-rates = <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <196608001>, + <(196608002 / 2)>, + <196608000>; }; &pwm { diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi index f0af1bf2b4d8..f683440ee569 100644 --- a/arch/arm/boot/dts/hi3620.dtsi +++ b/arch/arm/boot/dts/hi3620.dtsi @@ -89,7 +89,7 @@ }; sysctrl: system-controller@802000 { - compatible = "hisilicon,sysctrl"; + compatible = "hisilicon,sysctrl", "syscon"; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x802000 0x1000>; @@ -111,8 +111,10 @@ reg = <0x800000 0x1000>; /* timer00 & timer01 */ interrupts = <0 0 4>, <0 1 4>; - clocks = <&clock HI3620_TIMER0_MUX>, <&clock HI3620_TIMER1_MUX>; - clock-names = "apb_pclk"; + clocks = <&clock HI3620_TIMER0_MUX>, + <&clock HI3620_TIMER1_MUX>, + <&clock HI3620_TIMER0_MUX>; + clock-names = "timer0clk", "timer1clk", "apb_pclk"; status = "disabled"; }; @@ -121,8 +123,10 @@ reg = <0x801000 0x1000>; /* timer10 & timer11 */ interrupts = <0 2 4>, <0 3 4>; - clocks = <&clock HI3620_TIMER2_MUX>, <&clock HI3620_TIMER3_MUX>; - clock-names = "apb_pclk"; + clocks = <&clock HI3620_TIMER2_MUX>, + <&clock HI3620_TIMER3_MUX>, + <&clock HI3620_TIMER2_MUX>; + clock-names = "timer0clk", "timer1clk", "apb_pclk"; status = "disabled"; }; @@ -131,8 +135,10 @@ reg = <0xa01000 0x1000>; /* timer20 & timer21 */ interrupts = <0 4 4>, <0 5 4>; - clocks = <&clock HI3620_TIMER4_MUX>, <&clock HI3620_TIMER5_MUX>; - clock-names = "apb_pclk"; + clocks = <&clock HI3620_TIMER4_MUX>, + <&clock HI3620_TIMER5_MUX>, + <&clock HI3620_TIMER4_MUX>; + clock-names = "timer0lck", "timer1clk", "apb_pclk"; status = "disabled"; }; @@ -141,8 +147,10 @@ reg = <0xa02000 0x1000>; /* timer30 & timer31 */ interrupts = <0 6 4>, <0 7 4>; - clocks = <&clock HI3620_TIMER6_MUX>, <&clock HI3620_TIMER7_MUX>; - clock-names = "apb_pclk"; + clocks = <&clock HI3620_TIMER6_MUX>, + <&clock HI3620_TIMER7_MUX>, + <&clock HI3620_TIMER6_MUX>; + clock-names = "timer0clk", "timer1clk", "apb_pclk"; status = "disabled"; }; @@ -151,8 +159,10 @@ reg = <0xa03000 0x1000>; /* timer40 & timer41 */ interrupts = <0 96 4>, <0 97 4>; - clocks = <&clock HI3620_TIMER8_MUX>, <&clock HI3620_TIMER9_MUX>; - clock-names = "apb_pclk"; + clocks = <&clock HI3620_TIMER8_MUX>, + <&clock HI3620_TIMER9_MUX>, + <&clock HI3620_TIMER8_MUX>; + clock-names = "timer0clk", "timer1clk", "apb_pclk"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi index 4263a9339c2e..555bc6b6720f 100644 --- a/arch/arm/boot/dts/hip04.dtsi +++ b/arch/arm/boot/dts/hip04.dtsi @@ -213,7 +213,7 @@ }; sysctrl: sysctrl { - compatible = "hisilicon,sysctrl"; + compatible = "hisilicon,sysctrl", "syscon"; reg = <0x3e00000 0x00100000>; }; @@ -226,8 +226,8 @@ compatible = "arm,sp804", "arm,primecell"; reg = <0x3000000 0x1000>; interrupts = <0 224 4>; - clocks = <&clk_50m>, <&clk_50m>; - clock-names = "apb_pclk"; + clocks = <&clk_50m>, <&clk_50m>, <&clk_50m>; + clock-names = "timer0clk", "timer1clk", "apb_pclk"; }; arm-pmu { diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi index 3ee7967c202d..e2dbf1d8a67b 100644 --- a/arch/arm/boot/dts/hisi-x5hd2.dtsi +++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi @@ -370,8 +370,9 @@ arm,primecell-periphid = <0x00141805>; reg = <0xa2c000 0x1000>; interrupts = <0 29 4>; - clocks = <&clock HIX5HD2_WDG0_RST>; - clock-names = "apb_pclk"; + clocks = <&clock HIX5HD2_WDG0_RST>, + <&clock HIX5HD2_WDG0_RST>; + clock-names = "wdog_clk", "apb_pclk"; }; }; diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts index 0b2701ca2921..8cbaf1c81174 100644 --- a/arch/arm/boot/dts/imx23-evk.dts +++ b/arch/arm/boot/dts/imx23-evk.dts @@ -53,7 +53,7 @@ apb@80000000 { apbh@80000000 { - gpmi-nand@8000c000 { + nand-controller@8000c000 { pinctrl-names = "default"; pinctrl-0 = <&gpmi_pins_a &gpmi_pins_fixup>; status = "okay"; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 18289f6fb1f3..7f4c602454a5 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -76,7 +76,7 @@ status = "disabled"; }; - gpmi-nand@8000c000 { + nand-controller@8000c000 { compatible = "fsl,imx23-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h index 111bfdcbe552..f984b702efc5 100644 --- a/arch/arm/boot/dts/imx25-pinfunc.h +++ b/arch/arm/boot/dts/imx25-pinfunc.h @@ -87,6 +87,7 @@ #define MX25_PAD_EB1__EB1 0x044 0x25c 0x000 0x00 0x000 #define MX25_PAD_EB1__AUD4_RXD 0x044 0x25c 0x460 0x04 0x000 #define MX25_PAD_EB1__GPIO_2_13 0x044 0x25c 0x000 0x05 0x000 +#define MX25_PAD_EB1__CSPI3_SS1 0x044 0x25c 0x4c0 0x06 0x000 #define MX25_PAD_OE__OE 0x048 0x260 0x000 0x00 0x000 #define MX25_PAD_OE__AUD4_TXC 0x048 0x260 0x000 0x04 0x000 @@ -112,6 +113,7 @@ #define MX25_PAD_CS5__CSPI3_MISO 0x058 0x268 0x4b4 0x06 0x000 #define MX25_PAD_NF_CE0__NF_CE0 0x05c 0x26c 0x000 0x00 0x000 +#define MX25_PAD_NF_CE0__CSPI1_SS3 0x05c 0x26c 0x490 0x01 0x000 #define MX25_PAD_NF_CE0__GPIO_3_22 0x05c 0x26c 0x000 0x05 0x000 #define MX25_PAD_ECB__ECB 0x060 0x270 0x000 0x00 0x000 @@ -122,6 +124,7 @@ #define MX25_PAD_LBA__LBA 0x064 0x274 0x000 0x00 0x000 #define MX25_PAD_LBA__UART5_RXD 0x064 0x274 0x578 0x03 0x000 #define MX25_PAD_LBA__GPIO_3_24 0x064 0x274 0x000 0x05 0x000 +#define MX25_PAD_LBA__CSPI3_RDY 0x064 0x274 0x4b0 0x06 0x000 #define MX25_PAD_BCLK__BCLK 0x068 0x000 0x000 0x00 0x000 #define MX25_PAD_BCLK__GPIO_4_4 0x068 0x000 0x000 0x05 0x000 @@ -285,7 +288,8 @@ #define MX25_PAD_OE_ACD__GPIO_1_25 0x114 0x30c 0x000 0x05 0x000 #define MX25_PAD_CONTRAST__CONTRAST 0x118 0x310 0x000 0x00 0x000 -#define MX25_PAD_CONTRAST__CC4 0x118 0x310 0x000 0x01 0x000 +#define MX25_PAD_CONTRAST__GPT4_CAPIN1 0x118 0x310 0x000 0x01 0x000 +#define MX25_PAD_CONTRAST__CSPI2_SS1 0x118 0x310 0x4a8 0x02 0x000 #define MX25_PAD_CONTRAST__PWM4_PWMO 0x118 0x310 0x000 0x04 0x000 #define MX25_PAD_CONTRAST__FEC_CRS 0x118 0x310 0x508 0x05 0x001 #define MX25_PAD_CONTRAST__USBH2_PWR 0x118 0x310 0x000 0x06 0x000 @@ -298,7 +302,7 @@ #define MX25_PAD_CSI_D2__UART5_RXD 0x120 0x318 0x578 0x01 0x001 #define MX25_PAD_CSI_D2__SIM1_CLK0 0x120 0x318 0x000 0x04 0x000 #define MX25_PAD_CSI_D2__GPIO_1_27 0x120 0x318 0x000 0x05 0x000 -#define MX25_PAD_CSI_D2__CSPI3_MOSI 0x120 0x318 0x000 0x07 0x000 +#define MX25_PAD_CSI_D2__CSPI3_MOSI 0x120 0x318 0x4b8 0x07 0x001 #define MX25_PAD_CSI_D3__CSI_D3 0x124 0x31c 0x000 0x00 0x000 #define MX25_PAD_CSI_D3__UART5_TXD 0x124 0x31c 0x000 0x01 0x000 @@ -310,23 +314,25 @@ #define MX25_PAD_CSI_D4__UART5_RTS 0x128 0x320 0x574 0x01 0x001 #define MX25_PAD_CSI_D4__SIM1_VEN0 0x128 0x320 0x000 0x04 0x000 #define MX25_PAD_CSI_D4__GPIO_1_29 0x128 0x320 0x000 0x05 0x000 -#define MX25_PAD_CSI_D4__CSPI3_SCLK 0x128 0x320 0x000 0x07 0x000 +#define MX25_PAD_CSI_D4__CSPI3_SCLK 0x128 0x320 0x4ac 0x07 0x001 #define MX25_PAD_CSI_D5__CSI_D5 0x12c 0x324 0x000 0x00 0x000 #define MX25_PAD_CSI_D5__UART5_CTS 0x12c 0x324 0x000 0x01 0x000 #define MX25_PAD_CSI_D5__SIM1_TX0 0x12c 0x324 0x000 0x04 0x000 #define MX25_PAD_CSI_D5__GPIO_1_30 0x12c 0x324 0x000 0x05 0x000 -#define MX25_PAD_CSI_D5__CSPI3_RDY 0x12c 0x324 0x000 0x07 0x000 +#define MX25_PAD_CSI_D5__CSPI3_RDY 0x12c 0x324 0x4b0 0x07 0x001 #define MX25_PAD_CSI_D6__CSI_D6 0x130 0x328 0x000 0x00 0x000 /* SION must be set; see the comment for MX25_PAD_SD1_CMD__ESDHC1_CMD. */ #define MX25_PAD_CSI_D6__ESDHC2_CMD 0x130 0x328 0x4e0 0x12 0x001 #define MX25_PAD_CSI_D6__SIM1_PD0 0x130 0x328 0x000 0x04 0x000 #define MX25_PAD_CSI_D6__GPIO_1_31 0x130 0x328 0x000 0x05 0x000 +#define MX25_PAD_CSI_D6__CSPI3_SS0 0x130 0x328 0x4bc 0x07 0x001 #define MX25_PAD_CSI_D7__CSI_D7 0x134 0x32c 0x000 0x00 0x000 #define MX25_PAD_CSI_D7__ESDHC2_CLK 0x134 0x32C 0x4dc 0x02 0x001 #define MX25_PAD_CSI_D7__GPIO_1_6 0x134 0x32c 0x000 0x05 0x000 +#define MX25_PAD_CSI_D7__CSPI3_SS1 0x134 0x32c 0x4c0 0x07 0x001 #define MX25_PAD_CSI_D8__CSI_D8 0x138 0x330 0x000 0x00 0x000 #define MX25_PAD_CSI_D8__AUD6_RXC 0x138 0x330 0x000 0x02 0x000 @@ -398,7 +404,7 @@ #define MX25_PAD_UART1_RTS__UART1_RTS 0x178 0x370 0x000 0x00 0x000 #define MX25_PAD_UART1_RTS__CSI_D0 0x178 0x370 0x488 0x01 0x001 -#define MX25_PAD_UART1_RTS__CC3 0x178 0x370 0x000 0x02 0x000 +#define MX25_PAD_UART1_RTS__GPT3_CAPIN1 0x178 0x370 0x000 0x02 0x000 #define MX25_PAD_UART1_RTS__UART2_DCD 0x178 0x370 0x000 0x03 0x000 #define MX25_PAD_UART1_RTS__GPIO_4_24 0x178 0x370 0x000 0x05 0x000 @@ -415,12 +421,14 @@ #define MX25_PAD_UART2_RTS__UART2_RTS 0x188 0x380 0x000 0x00 0x000 #define MX25_PAD_UART2_RTS__FEC_COL 0x188 0x380 0x504 0x02 0x002 -#define MX25_PAD_UART2_RTS__CC1 0x188 0x380 0x000 0x03 0x000 +#define MX25_PAD_UART2_RTS__GPT1_CAPIN1 0x188 0x380 0x000 0x03 0x000 #define MX25_PAD_UART2_RTS__GPIO_4_28 0x188 0x380 0x000 0x05 0x000 +#define MX25_PAD_UART2_RTS__CSPI2_SS3 0x188 0x380 0x000 0x06 0x000 #define MX25_PAD_UART2_CTS__UART2_CTS 0x18c 0x384 0x000 0x00 0x000 #define MX25_PAD_UART2_CTS__FEC_RX_ERR 0x18c 0x384 0x518 0x02 0x002 #define MX25_PAD_UART2_CTS__GPIO_4_29 0x18c 0x384 0x000 0x05 0x000 +#define MX25_PAD_UART2_CTS__CSPI3_SS3 0x18c 0x384 0x4c8 0x06 0x001 /* * Removing the SION bit from MX25_PAD_*__ESDHCn_CMD breaks detecting an SD @@ -446,14 +454,17 @@ #define MX25_PAD_SD1_DATA0__GPIO_2_25 0x198 0x390 0x000 0x05 0x000 #define MX25_PAD_SD1_DATA1__ESDHC1_DAT1 0x19c 0x394 0x000 0x00 0x000 +#define MX25_PAD_SD1_DATA1__CSPI2_RDY 0x19c 0x394 0x498 0x01 0x001 #define MX25_PAD_SD1_DATA1__AUD7_RXD 0x19c 0x394 0x478 0x03 0x000 #define MX25_PAD_SD1_DATA1__GPIO_2_26 0x19c 0x394 0x000 0x05 0x000 #define MX25_PAD_SD1_DATA2__ESDHC1_DAT2 0x1a0 0x398 0x000 0x00 0x000 +#define MX25_PAD_SD1_DATA2__CSPI2_SS0 0x1a0 0x398 0x4a4 0x01 0x001 #define MX25_PAD_SD1_DATA2__FEC_RX_CLK 0x1a0 0x398 0x514 0x02 0x002 #define MX25_PAD_SD1_DATA2__GPIO_2_27 0x1a0 0x398 0x000 0x05 0x000 #define MX25_PAD_SD1_DATA3__ESDHC1_DAT3 0x1a4 0x39c 0x000 0x00 0x000 +#define MX25_PAD_SD1_DATA3__CSPI2_SS1 0x1a4 0x39c 0x4a8 0x01 0x001 #define MX25_PAD_SD1_DATA3__FEC_CRS 0x1a4 0x39c 0x508 0x02 0x002 #define MX25_PAD_SD1_DATA3__GPIO_2_28 0x1a4 0x39c 0x000 0x05 0x000 @@ -564,11 +575,15 @@ #define MX25_PAD_GPIO_C__PWM4_PWMO 0x1fc 0x3f8 0x000 0x01 0x000 #define MX25_PAD_GPIO_C__I2C2_SCL 0x1fc 0x3f8 0x51c 0x02 0x001 #define MX25_PAD_GPIO_C__KPP_COL4 0x1fc 0x3f8 0x52c 0x03 0x001 +#define MX25_PAD_GPIO_C__GPT2_CAPIN1 0x1fc 0x3f8 0x000 0x04 0x000 +#define MX25_PAD_GPIO_C__CSPI1_SS2 0x1fc 0x3f8 0x000 0x05 0x000 #define MX25_PAD_GPIO_C__CAN2_TX 0x1fc 0x3f8 0x000 0x06 0x000 +#define MX25_PAD_GPIO_C__CSPI2_SS2 0x1fc 0x3f8 0x000 0x07 0x000 #define MX25_PAD_GPIO_D__GPIO_D 0x200 0x3fc 0x000 0x00 0x000 #define MX25_PAD_GPIO_D__I2C2_SDA 0x200 0x3fc 0x520 0x02 0x001 #define MX25_PAD_GPIO_D__CAN2_RX 0x200 0x3fc 0x484 0x06 0x001 +#define MX25_PAD_GPIO_D__CSPI3_SS2 0x200 0x3fc 0x4c4 0x07 0x001 #define MX25_PAD_GPIO_E__GPIO_E 0x204 0x400 0x000 0x00 0x000 #define MX25_PAD_GPIO_E__I2C3_CLK 0x204 0x400 0x524 0x01 0x002 @@ -593,6 +608,7 @@ #define MX25_PAD_VSTBY_REQ__UART4_RTS 0x214 0x408 0x56c 0x06 0x002 #define MX25_PAD_VSTBY_ACK__VSTBY_ACK 0x218 0x40c 0x000 0x00 0x000 +#define MX25_PAD_VSTBY_ACK__CSPI1_SS3 0x218 0x40c 0x490 0x02 0x001 #define MX25_PAD_VSTBY_ACK__GPIO_3_18 0x218 0x40c 0x000 0x05 0x000 #define MX25_PAD_POWER_FAIL__POWER_FAIL 0x21c 0x410 0x000 0x00 0x000 diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi index 52c95248e25d..303f920201c5 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi +++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi @@ -18,8 +18,8 @@ }; &cspi1 { - cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>, - <&gpio4 27 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>, + <&gpio4 27 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts index bf883e45576a..344e77790152 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts @@ -65,7 +65,7 @@ &cspi1 { pinctrl-0 = <&pinctrl_cspi1>, <&pinctrl_cspi1cs1>; - cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>, + cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>, <&gpio4 27 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index fc0b318f8733..7bc132737a37 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -558,7 +558,7 @@ }; }; - nfc: nand@d8000000 { + nfc: nand-controller@d8000000 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,imx27-nand"; diff --git a/arch/arm/boot/dts/imx28-apf28.dts b/arch/arm/boot/dts/imx28-apf28.dts index 3ed2b328f7ef..14a92fe59770 100644 --- a/arch/arm/boot/dts/imx28-apf28.dts +++ b/arch/arm/boot/dts/imx28-apf28.dts @@ -17,7 +17,7 @@ apb@80000000 { apbh@80000000 { - gpmi-nand@8000c000 { + nand-controller@8000c000 { pinctrl-names = "default"; pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; status = "okay"; diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts index c5acc19c982d..b86be320496b 100644 --- a/arch/arm/boot/dts/imx28-apx4devkit.dts +++ b/arch/arm/boot/dts/imx28-apx4devkit.dts @@ -13,7 +13,7 @@ apb@80000000 { apbh@80000000 { - gpmi-nand@8000c000 { + nand-controller@8000c000 { pinctrl-names = "default"; pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; status = "okay"; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index 96c1d106bc64..7e2b0f198dfa 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -97,7 +97,7 @@ apb@80000000 { apbh@80000000 { - gpmi-nand@8000c000 { + nand-controller@8000c000 { pinctrl-names = "default"; pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg &gpmi_pins_evk>; diff --git a/arch/arm/boot/dts/imx28-m28.dtsi b/arch/arm/boot/dts/imx28-m28.dtsi index 0bac72d5351f..2bdb4c093545 100644 --- a/arch/arm/boot/dts/imx28-m28.dtsi +++ b/arch/arm/boot/dts/imx28-m28.dtsi @@ -16,7 +16,7 @@ apb@80000000 { apbh@80000000 { - gpmi-nand@8000c000 { + nand-controller@8000c000 { #address-cells = <1>; #size-cells = <1>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts index 91bd6deffee5..865ac3d573c7 100644 --- a/arch/arm/boot/dts/imx28-m28cu3.dts +++ b/arch/arm/boot/dts/imx28-m28cu3.dts @@ -17,7 +17,7 @@ apb@80000000 { apbh@80000000 { - gpmi-nand@8000c000 { + nand-controller@8000c000 { #address-cells = <1>; #size-cells = <1>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index a2b799c56f8f..94dfbf5b3f34 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -100,7 +100,7 @@ status = "disabled"; }; - gpmi: gpmi-nand@8000c000 { + gpmi: nand-controller@8000c000 { compatible = "fsl,imx28-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx50-evk.dts b/arch/arm/boot/dts/imx50-evk.dts index a25da415cb02..878e89c20190 100644 --- a/arch/arm/boot/dts/imx50-evk.dts +++ b/arch/arm/boot/dts/imx50-evk.dts @@ -20,7 +20,7 @@ &cspi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cspi>; - cs-gpios = <&gpio4 11 0>, <&gpio4 13 0>; + cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>, <&gpio4 13 GPIO_ACTIVE_LOW>; status = "okay"; flash: m25p32@1 { diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts index 563c1aae8c0c..c66f274ba4e9 100644 --- a/arch/arm/boot/dts/imx51-apf51dev.dts +++ b/arch/arm/boot/dts/imx51-apf51dev.dts @@ -74,8 +74,8 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>, - <&gpio4 25 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>, + <&gpio4 25 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-m53menlo.dts b/arch/arm/boot/dts/imx53-m53menlo.dts index 719ed5ca454a..f98691ae4415 100644 --- a/arch/arm/boot/dts/imx53-m53menlo.dts +++ b/arch/arm/boot/dts/imx53-m53menlo.dts @@ -104,7 +104,7 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; - cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>, <&gpio2 27 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>, <&gpio2 27 GPIO_ACTIVE_LOW>; status = "okay"; spidev@0 { diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index ec9fb8940ffa..9be44e807188 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -58,7 +58,7 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>; + cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>; status = "okay"; zigbee: mc1323@0 { diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi index 9a6cb138adf3..7e7f9f3b3906 100644 --- a/arch/arm/boot/dts/imx53-tqma53.dtsi +++ b/arch/arm/boot/dts/imx53-tqma53.dtsi @@ -50,8 +50,8 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>, - <&gpio3 24 0>, <&gpio3 25 0>; + cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>, + <&gpio3 24 GPIO_ACTIVE_LOW>, <&gpio3 25 GPIO_ACTIVE_LOW>; status = "disabled"; }; @@ -251,8 +251,8 @@ &cspi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cspi>; - cs-gpios = <&gpio1 18 0>, <&gpio1 19 0>, - <&gpio1 21 0>; + cs-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>, <&gpio1 19 GPIO_ACTIVE_LOW>, + <&gpio1 21 GPIO_ACTIVE_LOW>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi index 289feab42b88..24859d0c09c1 100644 --- a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi +++ b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi @@ -119,7 +119,8 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>, <&gpio2 16 0>, <&gpio2 17 0>; + cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>, + <&gpio2 16 GPIO_ACTIVE_LOW>, <&gpio2 17 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi index 9e027b9a5f91..665d63765cdc 100644 --- a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi +++ b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi @@ -212,6 +212,7 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; status = "disabled"; }; @@ -383,7 +384,7 @@ MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1 MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1 MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1 - MX6QDL_PAD_KEY_ROW1__ECSPI1_SS0 0x100b1 + MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0 >; }; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts index 809ca5611072..5c7e85300695 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts @@ -61,7 +61,7 @@ }; &ecspi2 { - cs-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts index 9eb2b73951b2..b4a9523e325b 100644 --- a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts +++ b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts @@ -67,7 +67,7 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; - cs-gpios = <&gpio5 12 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; status = "okay"; flash@0 { @@ -80,7 +80,7 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - cs-gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; status = "okay"; tpm@0 { diff --git a/arch/arm/boot/dts/imx6dl-prtrvt.dts b/arch/arm/boot/dts/imx6dl-prtrvt.dts index fa882458957b..5ac84445e9cc 100644 --- a/arch/arm/boot/dts/imx6dl-prtrvt.dts +++ b/arch/arm/boot/dts/imx6dl-prtrvt.dts @@ -37,7 +37,7 @@ }; &ecspi1 { - cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; @@ -52,7 +52,7 @@ }; &ecspi3 { - cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6dl-prtvt7.dts b/arch/arm/boot/dts/imx6dl-prtvt7.dts index 306b4f7bf762..ae6da241f13e 100644 --- a/arch/arm/boot/dts/imx6dl-prtvt7.dts +++ b/arch/arm/boot/dts/imx6dl-prtvt7.dts @@ -219,7 +219,7 @@ }; &ecspi2 { - cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6dl-tqma6a.dtsi b/arch/arm/boot/dts/imx6dl-tqma6a.dtsi new file mode 100644 index 000000000000..e891ef9b0091 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-tqma6a.dtsi @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2013 Sascha Hauer, Pengutronix + * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com> + */ + +#include "imx6dl.dtsi" +#include "imx6qdl-tqma6a.dtsi" +#include "imx6qdl-tqma6.dtsi" + +/ { + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x20000000>; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-tqma6b.dtsi b/arch/arm/boot/dts/imx6dl-tqma6b.dtsi new file mode 100644 index 000000000000..38cd8501a886 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-tqma6b.dtsi @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2013 Sascha Hauer, Pengutronix + * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com> + */ + +#include "imx6dl.dtsi" +#include "imx6qdl-tqma6b.dtsi" +#include "imx6qdl-tqma6.dtsi" + +/ { + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x20000000>; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi index c4a235d212b6..7d2c72562c73 100644 --- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi +++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi @@ -8,6 +8,11 @@ #include <dt-bindings/pwm/pwm.h> / { + aliases: aliases { + ethernet1 = ð1; + ethernet2 = ð2; + }; + backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>; @@ -135,13 +140,13 @@ }; }; - port@2 { + eth2: port@2 { reg = <2>; label = "eth2"; phy-handle = <&phy_port2>; }; - port@3 { + eth1: port@3 { reg = <3>; label = "eth1"; phy-handle = <&phy_port3>; @@ -258,29 +263,35 @@ reg = <0x30>; clock-mode = /bits/ 8 <1>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; - chan0 { + chan@0 { chan-name = "R"; led-cur = /bits/ 8 <0x20>; max-cur = /bits/ 8 <0x60>; + reg = <0>; }; - chan1 { + chan@1 { chan-name = "G"; led-cur = /bits/ 8 <0x20>; max-cur = /bits/ 8 <0x60>; + reg = <1>; }; - chan2 { + chan@2 { chan-name = "B"; led-cur = /bits/ 8 <0x20>; max-cur = /bits/ 8 <0x60>; + reg = <2>; }; - chan3 { + chan@3 { chan-name = "W"; led-cur = /bits/ 8 <0x0>; max-cur = /bits/ 8 <0x0>; + reg = <3>; }; }; @@ -311,7 +322,20 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - oled: oled@3d { + oled_1309: oled@3c { + compatible = "solomon,ssd1309fb-i2c"; + reg = <0x3c>; + solomon,height = <64>; + solomon,width = <128>; + solomon,page-offset = <0>; + solomon,segment-no-remap; + solomon,prechargep2 = <15>; + reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>; + vbat-supply = <&sw2_reg>; + status = "disabled"; + }; + + oled_1305: oled@3d { compatible = "solomon,ssd1305fb-i2c"; reg = <0x3d>; solomon,height = <64>; diff --git a/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts b/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts index 6010d3d872ab..a19609c7c7c0 100644 --- a/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts +++ b/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts @@ -29,7 +29,11 @@ status = "okay"; }; -&oled { +&oled_1305 { + status = "okay"; +}; + +&oled_1309 { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6dl-yapp4-orion.dts b/arch/arm/boot/dts/imx6dl-yapp4-orion.dts new file mode 100644 index 000000000000..884b236746bb --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-yapp4-orion.dts @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2020 Y Soft Corporation, a.s. + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6dl-yapp4-common.dtsi" + +/ { + model = "Y Soft IOTA Orion i.MX6DualLite board"; + compatible = "ysoft,imx6dl-yapp4-orion", "fsl,imx6dl"; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0xf0000000>; + }; +}; + +&gpio_oled { + status = "okay"; +}; + +&leds { + status = "okay"; +}; + +&oled_1305 { + status = "okay"; +}; + +&oled_1309 { + status = "okay"; +}; + +®_usb_h1_vbus { + status = "okay"; +}; + +&touchkeys { + status = "okay"; +}; + +&uart2 { + status = "disabled"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbphy2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts b/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts index a1173bf5bff5..f6ae24efd4aa 100644 --- a/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts +++ b/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts @@ -17,6 +17,10 @@ }; }; +&aliases { + /delete-property/ ethernet1; +}; + &backlight { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index 77b65a402e19..fdd81fdc3f35 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -88,10 +88,6 @@ }; aips1: bus@2000000 { - iomuxc: pinctrl@20e0000 { - compatible = "fsl,imx6dl-iomuxc"; - }; - pxp: pxp@20f0000 { reg = <0x020f0000 0x4000>; interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>; @@ -298,6 +294,10 @@ compatible = "fsl,imx6dl-hdmi"; }; +&iomuxc { + compatible = "fsl,imx6dl-iomuxc"; +}; + &ipu1_csi1 { ipu1_csi1_from_ipu1_csi1_mux: endpoint { remote-endpoint = <&ipu1_csi1_mux_to_ipu1_csi1>; diff --git a/arch/arm/boot/dts/imx6q-b450v3.dts b/arch/arm/boot/dts/imx6q-b450v3.dts index fb0980190aa0..604f2420370f 100644 --- a/arch/arm/boot/dts/imx6q-b450v3.dts +++ b/arch/arm/boot/dts/imx6q-b450v3.dts @@ -84,19 +84,19 @@ }; &pca9539 { - P04 { + P04-hog { gpio-hog; gpios = <4 0>; output-low; line-name = "PCA9539-P04"; }; - P07 { - gpio-hog; - gpios = <7 0>; - output-low; - line-name = "PCA9539-P07"; - }; + P07-hog { + gpio-hog; + gpios = <7 0>; + output-low; + line-name = "PCA9539-P07"; + }; }; &pci_root { diff --git a/arch/arm/boot/dts/imx6q-b650v3.dts b/arch/arm/boot/dts/imx6q-b650v3.dts index 8f762d9c5ae9..56d2aeb1900c 100644 --- a/arch/arm/boot/dts/imx6q-b650v3.dts +++ b/arch/arm/boot/dts/imx6q-b650v3.dts @@ -84,12 +84,12 @@ }; &pca9539 { - P07 { - gpio-hog; - gpios = <7 0>; - output-low; - line-name = "PCA9539-P07"; - }; + P07-hog { + gpio-hog; + gpios = <7 0>; + output-low; + line-name = "PCA9539-P07"; + }; }; &usbphy1 { diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts index 1ea64ecf4291..3d6b757bf325 100644 --- a/arch/arm/boot/dts/imx6q-b850v3.dts +++ b/arch/arm/boot/dts/imx6q-b850v3.dts @@ -199,14 +199,14 @@ }; &pca9539 { - P10 { + P10-hog { gpio-hog; gpios = <8 0>; output-low; line-name = "PCA9539-P10"; }; - P11 { + P11-hog { gpio-hog; gpios = <9 0>; output-low; diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi index fc81f2f4b62d..e4578ed3371e 100644 --- a/arch/arm/boot/dts/imx6q-ba16.dtsi +++ b/arch/arm/boot/dts/imx6q-ba16.dtsi @@ -134,7 +134,7 @@ }; &ecspi1 { - cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi index 1938b04199c4..2a98cc657595 100644 --- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi +++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi @@ -102,10 +102,15 @@ #address-cells = <1>; #size-cells = <0>; - switch@0 { + switch: switch@0 { compatible = "marvell,mv88e6085"; /* 88e6240*/ reg = <0>; + interrupt-parent = <&gpio2>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + switch_ports: ports { #address-cells = <1>; #size-cells = <0>; @@ -117,22 +122,32 @@ switchphy0: switchphy@0 { reg = <0>; + interrupt-parent = <&switch>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; }; switchphy1: switchphy@1 { reg = <1>; + interrupt-parent = <&switch>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; }; switchphy2: switchphy@2 { reg = <2>; + interrupt-parent = <&switch>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; }; switchphy3: switchphy@3 { reg = <3>; + interrupt-parent = <&switch>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; }; switchphy4: switchphy@4 { reg = <4>; + interrupt-parent = <&switch>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; }; }; }; @@ -140,7 +155,7 @@ }; &ecspi5 { - cs-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi5>; status = "okay"; @@ -233,42 +248,42 @@ interrupt-parent = <&gpio2>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; - P12 { + P12-hog { gpio-hog; gpios = <10 0>; output-low; line-name = "PCA9539-P12"; }; - P13 { + P13-hog { gpio-hog; gpios = <11 0>; output-low; line-name = "PCA9539-P13"; }; - P14 { + P14-hog { gpio-hog; gpios = <12 0>; output-low; line-name = "PCA9539-P14"; }; - P15 { + P15-hog { gpio-hog; gpios = <13 0>; output-low; line-name = "PCA9539-P15"; }; - P16 { + P16-hog { gpio-hog; gpios = <14 0>; output-low; line-name = "PCA9539-P16"; }; - P17 { + P17-hog { gpio-hog; gpios = <15 0>; output-low; diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts index cab9e92531c7..bfb530f29d9d 100644 --- a/arch/arm/boot/dts/imx6q-cm-fx6.dts +++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts @@ -255,7 +255,7 @@ }; &ecspi1 { - cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>, <&gpio3 19 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi index 87f0aa897086..236fc205c389 100644 --- a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi +++ b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi @@ -59,7 +59,7 @@ }; &ecspi1 { - cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>, <&gpio4 11 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio4 11 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index f9df207b2778..fa2307d8ce86 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -99,7 +99,7 @@ &ecspi5 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi5>; - cs-gpios = <&gpio1 12 0>; + cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; status = "okay"; flash: m25p80@0 { diff --git a/arch/arm/boot/dts/imx6q-dms-ba16.dts b/arch/arm/boot/dts/imx6q-dms-ba16.dts index 57761f3172fa..48fb47e715f6 100644 --- a/arch/arm/boot/dts/imx6q-dms-ba16.dts +++ b/arch/arm/boot/dts/imx6q-dms-ba16.dts @@ -42,7 +42,7 @@ }; &ecspi5 { - cs-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi5>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index b6e2b580051d..4cde45d5c90c 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -132,7 +132,7 @@ }; &ecspi1 { - cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi index 2618eccfe50d..4d6a0c3e8455 100644 --- a/arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi +++ b/arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi @@ -14,10 +14,9 @@ /* Quad/Dual SoMs have 3 chip-select signals */ &ecspi4 { - fsl,spi-num-chipselects = <3>; - cs-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>, - <&gpio3 29 GPIO_ACTIVE_HIGH>, - <&gpio3 25 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>, + <&gpio3 29 GPIO_ACTIVE_LOW>, + <&gpio3 25 GPIO_ACTIVE_LOW>; }; &pinctrl_ecspi4 { diff --git a/arch/arm/boot/dts/imx6q-logicpd.dts b/arch/arm/boot/dts/imx6q-logicpd.dts index 8f94364ba484..46a4ddedb423 100644 --- a/arch/arm/boot/dts/imx6q-logicpd.dts +++ b/arch/arm/boot/dts/imx6q-logicpd.dts @@ -9,7 +9,7 @@ / { model = "Logic PD i.MX6QD SOM-M3"; - compatible = "fsl,imx6q"; + compatible = "logicpd,imx6q-logicpd", "fsl,imx6q"; backlight: backlight-lvds { compatible = "pwm-backlight"; diff --git a/arch/arm/boot/dts/imx6q-prti6q.dts b/arch/arm/boot/dts/imx6q-prti6q.dts index de6cbaab8b49..d112b50f8c5d 100644 --- a/arch/arm/boot/dts/imx6q-prti6q.dts +++ b/arch/arm/boot/dts/imx6q-prti6q.dts @@ -158,7 +158,7 @@ }; &ecspi1 { - cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; @@ -171,7 +171,7 @@ }; &ecspi2 { - cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>, <&gpio4 25 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>, <&gpio4 25 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs>; status = "okay"; @@ -195,7 +195,7 @@ }; &ecspi3 { - cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-tqma6a.dtsi b/arch/arm/boot/dts/imx6q-tqma6a.dtsi new file mode 100644 index 000000000000..ab4c07c13a13 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-tqma6a.dtsi @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2013 Sascha Hauer, Pengutronix + * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com> + */ + +#include "imx6q.dtsi" +#include "imx6qdl-tqma6a.dtsi" +#include "imx6qdl-tqma6.dtsi" + +/ { + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x40000000>; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-tqma6b.dtsi b/arch/arm/boot/dts/imx6q-tqma6b.dtsi new file mode 100644 index 000000000000..7224c376c318 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-tqma6b.dtsi @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2013 Sascha Hauer, Pengutronix + */ + +#include "imx6q.dtsi" +#include "imx6qdl-tqma6b.dtsi" +#include "imx6qdl-tqma6.dtsi" + +/ { + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x40000000>; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts index a57c2e3a8435..63550351340d 100644 --- a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts +++ b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts @@ -144,8 +144,8 @@ }; &ecspi1 { - cs-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>, - <&gpio4 10 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, + <&gpio4 10 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 78a4d64929f3..5277e3903291 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -182,10 +182,6 @@ status = "disabled"; }; }; - - iomuxc: pinctrl@20e0000 { - compatible = "fsl,imx6q-iomuxc"; - }; }; sata: sata@2200000 { @@ -427,6 +423,10 @@ }; }; +&iomuxc { + compatible = "fsl,imx6q-iomuxc"; +}; + &ipu1_csi1 { ipu1_csi1_from_mipi_vc1: endpoint { remote-endpoint = <&mipi_vc1_to_ipu1_csi1>; diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index dbdd7db60325..30fa349f9d05 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -127,7 +127,7 @@ /* Apalis SPI1 */ &ecspi1 { - cs-gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "disabled"; @@ -135,7 +135,7 @@ /* Apalis SPI2 */ &ecspi2 { - cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; status = "disabled"; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi index d954661fa055..e21f6ac864e5 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi @@ -91,7 +91,7 @@ }; &ecspi4 { - cs-gpios = <&gpio3 20 0>; + cs-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi4>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi index d38630d4b892..ead7ba27e105 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi @@ -110,23 +110,23 @@ }; &ecspi1 { - cs-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH - &gpio4 10 GPIO_ACTIVE_HIGH - &gpio4 11 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW + &gpio4 10 GPIO_ACTIVE_LOW + &gpio4 11 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; }; &ecspi2 { - cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH &gpio2 27 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW &gpio2 27 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; status = "okay"; }; &ecspi4 { - cs-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH &gpio5 2 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio3 29 GPIO_ACTIVE_LOW &gpio5 2 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi4>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi index 0930194fd960..4e2a309c93fa 100644 --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi @@ -94,7 +94,7 @@ /* Colibri SSP */ &ecspi4 { - cs-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi4>; status = "disabled"; diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi index ebe7a8bddf04..648f5fcb72e6 100644 --- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi +++ b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi @@ -30,7 +30,7 @@ }; &ecspi3 { - cs-gpios = <&gpio4 24 0>; + cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-emcon.dtsi b/arch/arm/boot/dts/imx6qdl-emcon.dtsi index 35e230f991f1..7228b894a763 100644 --- a/arch/arm/boot/dts/imx6qdl-emcon.dtsi +++ b/arch/arm/boot/dts/imx6qdl-emcon.dtsi @@ -168,8 +168,8 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; - cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>, - <&gpio2 27 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>, + <&gpio2 27 GPIO_ACTIVE_LOW>; }; &ecspi4 { diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi index 4d01c3300b97..3c04b5a4f3cb 100644 --- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi @@ -5,6 +5,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> / { /* these are used by bootloader for disabling nodes */ @@ -152,7 +153,7 @@ compatible = "gw,gsc"; reg = <0x20>; interrupt-parent = <&gpio1>; - interrupts = <4 GPIO_ACTIVE_LOW>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index a46ea98228c2..736074f1c3ef 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -5,6 +5,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> / { /* these are used by bootloader for disabling nodes */ @@ -182,7 +183,7 @@ }; &ecspi3 { - cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; status = "okay"; @@ -217,7 +218,7 @@ compatible = "gw,gsc"; reg = <0x20>; interrupt-parent = <&gpio1>; - interrupts = <4 GPIO_ACTIVE_LOW>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index a28e79463d0c..8072ed47c6bb 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -5,6 +5,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> / { /* these are used by bootloader for disabling nodes */ @@ -210,7 +211,7 @@ compatible = "gw,gsc"; reg = <0x20>; interrupt-parent = <&gpio1>; - interrupts = <4 GPIO_ACTIVE_LOW>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index b5f934b8a239..8c9bcdd39830 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -5,6 +5,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/sound/fsl-imx-audmux.h> / { @@ -212,7 +213,7 @@ }; &ecspi2 { - cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; status = "okay"; @@ -247,7 +248,7 @@ compatible = "gw,gsc"; reg = <0x20>; interrupt-parent = <&gpio1>; - interrupts = <4 GPIO_ACTIVE_LOW>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi index 1516e2b0bcde..e5d803d023c8 100644 --- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi @@ -48,6 +48,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/media/tda1997x.h> #include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/sound/fsl-imx-audmux.h> / { @@ -219,7 +220,7 @@ compatible = "gw,gsc"; reg = <0x20>; interrupt-parent = <&gpio1>; - interrupts = <4 GPIO_ACTIVE_LOW>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi index 0da6e6f7482b..290a607fede9 100644 --- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi @@ -5,6 +5,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> / { /* these are used by bootloader for disabling nodes */ @@ -144,7 +145,7 @@ compatible = "gw,gsc"; reg = <0x20>; interrupt-parent = <&gpio1>; - interrupts = <4 GPIO_ACTIVE_LOW>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi index db30de5d6490..c15b9cc63bf8 100644 --- a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi @@ -47,6 +47,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> / { /* these are used by bootloader for disabling nodes */ @@ -64,8 +65,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; user-pb { label = "user_pb"; @@ -182,7 +181,7 @@ compatible = "gw,gsc"; reg = <0x20>; interrupt-parent = <&gpio1>; - interrupts = <4 GPIO_ACTIVE_LOW>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi index d6b074597518..093a219a77ae 100644 --- a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi @@ -47,6 +47,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> / { /* these are used by bootloader for disabling nodes */ @@ -252,7 +253,7 @@ }; &ecspi3 { - cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; status = "okay"; @@ -294,7 +295,7 @@ compatible = "gw,gsc"; reg = <0x20>; interrupt-parent = <&gpio1>; - interrupts = <4 GPIO_ACTIVE_LOW>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi index fbe6c32bd756..e1c8dd233cab 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi @@ -47,6 +47,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> / { chosen { @@ -235,7 +236,7 @@ compatible = "gw,gsc"; reg = <0x20>; interrupt-parent = <&gpio1>; - interrupts = <4 GPIO_ACTIVE_LOW>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi index 23c6e4047621..3cd2e717c1da 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi @@ -47,6 +47,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> / { /* these are used by bootloader for disabling nodes */ @@ -257,7 +258,7 @@ compatible = "gw,gsc"; reg = <0x20>; interrupt-parent = <&gpio1>; - interrupts = <4 GPIO_ACTIVE_LOW>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi index b1ff7c859c4d..21c68a55bcb9 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi @@ -5,6 +5,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> / { /* these are used by bootloader for disabling nodes */ @@ -154,7 +155,7 @@ compatible = "gw,gsc"; reg = <0x20>; interrupt-parent = <&gpio1>; - interrupts = <4 GPIO_ACTIVE_LOW>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi index 11f84ee7b88f..ed4e22259959 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi @@ -5,6 +5,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> / { /* these are used by bootloader for disabling nodes */ @@ -134,7 +135,7 @@ &ecspi3 { - cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; status = "okay"; @@ -163,7 +164,7 @@ compatible = "gw,gsc"; reg = <0x20>; interrupt-parent = <&gpio1>; - interrupts = <4 GPIO_ACTIVE_LOW>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi index 0a1ffff9eb75..797f160249f7 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi @@ -5,6 +5,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> / { /* these are used by bootloader for disabling nodes */ @@ -129,7 +130,7 @@ }; &ecspi2 { - cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; status = "okay"; @@ -158,7 +159,7 @@ compatible = "gw,gsc"; reg = <0x20>; interrupt-parent = <&gpio1>; - interrupts = <4 GPIO_ACTIVE_LOW>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi index d62a8da49367..4cd7d290f5b2 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi @@ -5,6 +5,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> / { /* these are used by bootloader for disabling nodes */ @@ -139,7 +140,7 @@ compatible = "gw,gsc"; reg = <0x20>; interrupt-parent = <&gpio1>; - interrupts = <4 GPIO_ACTIVE_LOW>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi index e4231331f04e..eb1ad28946d3 100644 --- a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi @@ -203,7 +203,7 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard2_ecspi2>; - cs-gpios = <&gpio2 26 0>; + cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi index 81c7ebb4b3fb..265f5f3dbff6 100644 --- a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi @@ -245,16 +245,16 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; - cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>, - <&gpio2 27 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>, + <&gpio2 27 GPIO_ACTIVE_LOW>; }; /* SPI0 */ &ecspi4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi4>; - cs-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>, - <&gpio3 29 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>, + <&gpio3 29 GPIO_ACTIVE_LOW>; status = "okay"; /* default boot source: workaround #1 for errata ERR006282 */ diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi index 185a1a31ca39..a0917823c244 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi @@ -316,7 +316,7 @@ }; &ecspi1 { - cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi index 4bbe54e1ddb5..92d09a3ebe0e 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi @@ -247,7 +247,7 @@ }; &ecspi1 { - cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index c63e1bc1ad3a..1243677b5f97 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -232,7 +232,7 @@ }; &ecspi1 { - cs-gpios = <&gpio3 19 0>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index bc43c75f1745..e361df26a168 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -71,7 +71,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; status = "okay"; - cs-gpios = <&gpio4 24 0>; + cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; som_flash: flash@0 { compatible = "m25p80", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx6qdl-pico.dtsi b/arch/arm/boot/dts/imx6qdl-pico.dtsi index 39dfd90c2c6b..5de4ccb97916 100644 --- a/arch/arm/boot/dts/imx6qdl-pico.dtsi +++ b/arch/arm/boot/dts/imx6qdl-pico.dtsi @@ -167,7 +167,7 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; - cs-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio2 27 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 55f736dbee0b..afe477f32984 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -267,7 +267,7 @@ }; &ecspi1 { - cs-gpios = <&gpio3 19 0>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>; status = "disabled"; /* pin conflict with WEIM NOR */ diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 95f9ddab5996..fdc3aa9d544d 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -308,7 +308,7 @@ }; &ecspi1 { - cs-gpios = <&gpio3 19 0>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 68b3e68cb8df..f824c9abd11a 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -105,9 +105,13 @@ "Ext Spk", "SPKOUTL", "Ext Spk", "SPKOUTR", "AMIC", "MICBIAS", - "IN3R", "AMIC"; + "IN3R", "AMIC", + "DMIC", "MICBIAS", + "DMICDAT", "DMIC"; mux-int-port = <2>; mux-ext-port = <3>; + hp-det-gpio = <&gpio7 8 GPIO_ACTIVE_LOW>; + mic-det-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>; }; backlight_lvds: backlight-lvds { @@ -185,7 +189,7 @@ }; &ecspi1 { - cs-gpios = <&gpio4 9 0>; + cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-tqma6.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6.dtsi new file mode 100644 index 000000000000..b18b83ac6aee --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-tqma6.dtsi @@ -0,0 +1,201 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2013 Sascha Hauer, Pengutronix + * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com> + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "supply-3p3v"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + status = "okay"; + + m25p80: flash@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + m25p,fast-read; + }; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + /* HYS, SPEED = MED, 100k up, DSE = 011, SRE_FAST */ + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x1b099 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0xb099 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0xb099 + /* eCSPI1 SS1 */ + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0xb099 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b899 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b899 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b899 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b899 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b099 /* PMIC irq */ + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + >; + }; +}; + +&pmic { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio6>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + + regulators { + reg_vddcore: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + }; + + reg_vddsoc: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + }; + + reg_gen_3v3: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_ddr_1v5a: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-always-on; + }; + + reg_ddr_1v5b: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_5v_600mA: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + regulator-always-on; + }; + + reg_snvs_3v: vsnvs { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + reg_vrefddr: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + reg_vgen1_1v5: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + /* not used */ + }; + + reg_vgen2_1v2_eth: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + reg_vgen3_2v8: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vgen4_1v8: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vgen5_1v8_eth: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vgen6_3v3: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; +}; + +/* eMMC */ +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + vmmc-supply = <®_3p3v>; + non-removable; + disable-wp; + no-sd; + no-sdio; + bus-width = <8>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + mmccard: mmccard@0 { + reg = <0>; + compatible = "mmc-card"; + broken-hpi; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi new file mode 100644 index 000000000000..b679bec78e6c --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2013 Sascha Hauer, Pengutronix + * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com> + */ + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clock-frequency = <100000>; + status = "okay"; + + pmic: pmic@8 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + }; + + sensor@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + eeprom@50 { + compatible = "st,24c64", "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi new file mode 100644 index 000000000000..49c472285c06 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2013 Sascha Hauer, Pengutronix + * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com> + */ + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clock-frequency = <100000>; + status = "okay"; + + pmic: pmic@8 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + }; + + sensor@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + eeprom@50 { + compatible = "st,24c64", "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-ts4900.dtsi b/arch/arm/boot/dts/imx6qdl-ts4900.dtsi index 267c956d8910..f88da757edda 100644 --- a/arch/arm/boot/dts/imx6qdl-ts4900.dtsi +++ b/arch/arm/boot/dts/imx6qdl-ts4900.dtsi @@ -95,7 +95,7 @@ }; &ecspi1 { - cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; @@ -108,7 +108,7 @@ }; &ecspi2 { - cs-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-ts7970.dtsi b/arch/arm/boot/dts/imx6qdl-ts7970.dtsi index f0be516dc28e..e6aa0c33754d 100644 --- a/arch/arm/boot/dts/imx6qdl-ts7970.dtsi +++ b/arch/arm/boot/dts/imx6qdl-ts7970.dtsi @@ -165,7 +165,7 @@ }; &ecspi1 { - cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; @@ -179,9 +179,9 @@ &ecspi2 { cs-gpios = < - &gpio5 31 GPIO_ACTIVE_HIGH - &gpio7 12 GPIO_ACTIVE_HIGH - &gpio5 18 GPIO_ACTIVE_HIGH + &gpio5 31 GPIO_ACTIVE_LOW + &gpio7 12 GPIO_ACTIVE_LOW + &gpio5 18 GPIO_ACTIVE_LOW >; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi index 5af9ce977b12..66b15748e287 100644 --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -316,7 +316,7 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; status = "okay"; flash@0 { diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 43edbf1156c7..7a8837cbe21b 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -159,7 +159,7 @@ clocks = <&clks IMX6QDL_CLK_APBH_DMA>; }; - gpmi: gpmi-nand@112000 { + gpmi: nand-controller@112000 { compatible = "fsl,imx6q-gpmi-nand"; reg = <0x00112000 0x2000>, <0x00114000 0x2000>; reg-names = "gpmi-nand", "bch"; @@ -1043,8 +1043,9 @@ <0 119 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET_REF>, <&clks IMX6QDL_CLK_ENET_REF>; - clock-names = "ipg", "ahb", "ptp"; + clock-names = "ipg", "ahb", "ptp", "enet_out"; fsl,stop-mode = <&gpr 0x34 27>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6qp-sabreauto.dts b/arch/arm/boot/dts/imx6qp-sabreauto.dts index 639d9dd35377..2bb3bfb18ec3 100644 --- a/arch/arm/boot/dts/imx6qp-sabreauto.dts +++ b/arch/arm/boot/dts/imx6qp-sabreauto.dts @@ -47,7 +47,8 @@ }; &pcie { - status = "disabled"; + reset-gpio = <&max7310_c 5 GPIO_ACTIVE_LOW>; + status = "okay"; }; &sata { diff --git a/arch/arm/boot/dts/imx6qp-tqma6b.dtsi b/arch/arm/boot/dts/imx6qp-tqma6b.dtsi new file mode 100644 index 000000000000..bb6ff7c64b27 --- /dev/null +++ b/arch/arm/boot/dts/imx6qp-tqma6b.dtsi @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2013 Sascha Hauer, Pengutronix + */ + +#include "imx6q.dtsi" +#include "imx6qp.dtsi" +#include "imx6qdl-tqma6b.dtsi" +#include "imx6qdl-tqma6.dtsi" + +/ { + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x40000000>; + }; +}; diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index b1b069e723d2..25f6f2fb1555 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -94,6 +94,8 @@ sound { compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hp>; model = "wm8962-audio"; ssi-controller = <&ssi2>; audio-codec = <&codec>; @@ -106,6 +108,7 @@ "IN3R", "AMIC"; mux-int-port = <2>; mux-ext-port = <3>; + hp-det-gpio = <&gpio4 19 GPIO_ACTIVE_LOW>; }; panel { @@ -129,7 +132,7 @@ }; &ecspi1 { - cs-gpios = <&gpio4 11 0>; + cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; @@ -343,6 +346,12 @@ >; }; + pinctrl_hp: hpgrp { + fsl,pins = < + MX6SL_PAD_FEC_RX_ER__GPIO4_IO19 0x1b0b0 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x4001b8b1 diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts new file mode 100644 index 000000000000..caa279608803 --- /dev/null +++ b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts @@ -0,0 +1,588 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device tree for the Tolino Shine 2 HD ebook reader + * + * Name on mainboard is: 37NB-E60QF0+4A2 or 37NB-E60QF0+4A3 + * Serials start with: E60QF2 + * + * Copyright 2020 Andreas Kemnade + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include "imx6sl.dtsi" + +/ { + model = "Tolino Shine 2 HD"; + compatible = "kobo,tolino-shine2hd", "fsl,imx6sl"; + + chosen { + stdout-path = &uart1; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + cover { + label = "Cover"; + gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; + linux,code = <SW_LID>; + linux,input-type = <EV_SW>; + wakeup-source; + }; + + fl { + label = "Frontlight"; + gpios = <&gpio3 26 GPIO_ACTIVE_LOW>; + linux,code = <KEY_BRIGHTNESS_CYCLE>; + }; + + home { + label = "Home"; + gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOME>; + }; + + power { + label = "Power"; + gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + leds: leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led>; + + on { + label = "tolinoshine2hd:white:on"; + gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + reg_wifi: regulator-wifi { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_power>; + regulator-name = "SD3_SPWR"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio4 29 GPIO_ACTIVE_LOW>; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_reset>; + post-power-on-delay-ms = <20>; + reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + }; +}; + +&i2c1 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_sleep>; + status = "okay"; + + /* TODO: embedded controller at 0x43 (driver missing) */ + +}; + +&i2c2 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_sleep>; + clock-frequency = <100000>; + status = "okay"; + + zforce: touchscreen@50 { + compatible = "neonode,zforce"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_zforce>; + reg = <0x50>; + interrupt-parent = <&gpio5>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&ldo1_reg>; + reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + x-size = <1072>; + y-size = <1448>; + }; + + /* TODO: TPS65185 PMIC for E Ink at 0x68 */ + +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clock-frequency = <400000>; + status = "okay"; + + ricoh619: pmic@32 { + compatible = "ricoh,rc5t619"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ricoh_gpio>; + reg = <0x32>; + interrupt-parent = <&gpio5>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + system-power-controller; + + regulators { + dcdc1_reg: DCDC1 { + regulator-name = "DCDC1"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <900000>; + regulator-suspend-min-microvolt = <900000>; + }; + }; + + /* Core3_3V3 */ + dcdc2_reg: DCDC2 { + regulator-name = "DCDC2"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <3100000>; + regulator-suspend-min-microvolt = <3100000>; + }; + }; + + dcdc3_reg: DCDC3 { + regulator-name = "DCDC3"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <1140000>; + regulator-suspend-min-microvolt = <1140000>; + }; + }; + + /* Core4_1V2 */ + dcdc4_reg: DCDC4 { + regulator-name = "DCDC4"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <1140000>; + regulator-suspend-min-microvolt = <1140000>; + }; + }; + + /* Core4_1V8 */ + dcdc5_reg: DCDC5 { + regulator-name = "DCDC5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <1700000>; + regulator-suspend-min-microvolt = <1700000>; + }; + }; + + /* IR_3V3 */ + ldo1_reg: LDO1 { + regulator-name = "LDO1"; + regulator-boot-on; + }; + + /* Core1_3V3 */ + ldo2_reg: LDO2 { + regulator-name = "LDO2"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <3000000>; + regulator-suspend-min-microvolt = <3000000>; + }; + }; + + /* Core5_1V2 */ + ldo3_reg: LDO3 { + regulator-name = "LDO3"; + regulator-always-on; + regulator-boot-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "LDO4"; + regulator-boot-on; + }; + + /* SPD_3V3 */ + ldo5_reg: LDO5 { + regulator-name = "LDO5"; + regulator-always-on; + regulator-boot-on; + }; + + /* DDR_0V6 */ + ldo6_reg: LDO6 { + regulator-name = "LDO6"; + regulator-always-on; + regulator-boot-on; + }; + + /* VDD_PWM */ + ldo7_reg: LDO7 { + regulator-name = "LDO7"; + regulator-always-on; + regulator-boot-on; + }; + + /* ldo_1v8 */ + ldo8_reg: LDO8 { + regulator-name = "LDO8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo9_reg: LDO9 { + regulator-name = "LDO9"; + regulator-boot-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "LDO10"; + regulator-boot-on; + }; + + ldortc1_reg: LDORTC1 { + regulator-name = "LDORTC1"; + regulator-always-on; + regulator-boot-on; + }; + }; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_gpio_keys: gpio-keysgrp { + fsl,pins = < + MX6SL_PAD_SD1_DAT1__GPIO5_IO08 0x17059 + MX6SL_PAD_SD1_DAT4__GPIO5_IO12 0x17059 + MX6SL_PAD_KEY_COL1__GPIO3_IO26 0x17059 + MX6SL_PAD_KEY_ROW0__GPIO3_IO25 0x17059 + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX6SL_PAD_LCD_DAT0__GPIO2_IO20 0x79 + MX6SL_PAD_LCD_DAT1__GPIO2_IO21 0x79 + MX6SL_PAD_LCD_DAT2__GPIO2_IO22 0x79 + MX6SL_PAD_LCD_DAT3__GPIO2_IO23 0x79 + MX6SL_PAD_LCD_DAT4__GPIO2_IO24 0x79 + MX6SL_PAD_LCD_DAT5__GPIO2_IO25 0x79 + MX6SL_PAD_LCD_DAT6__GPIO2_IO26 0x79 + MX6SL_PAD_LCD_DAT7__GPIO2_IO27 0x79 + MX6SL_PAD_LCD_DAT8__GPIO2_IO28 0x79 + MX6SL_PAD_LCD_DAT9__GPIO2_IO29 0x79 + MX6SL_PAD_LCD_DAT10__GPIO2_IO30 0x79 + MX6SL_PAD_LCD_DAT11__GPIO2_IO31 0x79 + MX6SL_PAD_LCD_DAT12__GPIO3_IO00 0x79 + MX6SL_PAD_LCD_DAT13__GPIO3_IO01 0x79 + MX6SL_PAD_LCD_DAT14__GPIO3_IO02 0x79 + MX6SL_PAD_LCD_DAT15__GPIO3_IO03 0x79 + MX6SL_PAD_LCD_DAT16__GPIO3_IO04 0x79 + MX6SL_PAD_LCD_DAT17__GPIO3_IO05 0x79 + MX6SL_PAD_LCD_DAT18__GPIO3_IO06 0x79 + MX6SL_PAD_LCD_DAT19__GPIO3_IO07 0x79 + MX6SL_PAD_LCD_DAT20__GPIO3_IO08 0x79 + MX6SL_PAD_LCD_DAT21__GPIO3_IO09 0x79 + MX6SL_PAD_LCD_DAT22__GPIO3_IO10 0x79 + MX6SL_PAD_LCD_DAT23__GPIO3_IO11 0x79 + MX6SL_PAD_LCD_CLK__GPIO2_IO15 0x79 + MX6SL_PAD_LCD_ENABLE__GPIO2_IO16 0x79 + MX6SL_PAD_LCD_HSYNC__GPIO2_IO17 0x79 + MX6SL_PAD_LCD_VSYNC__GPIO2_IO18 0x79 + MX6SL_PAD_LCD_RESET__GPIO2_IO19 0x79 + MX6SL_PAD_KEY_COL3__GPIO3_IO30 0x79 + MX6SL_PAD_KEY_ROW7__GPIO4_IO07 0x79 + MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x79 + MX6SL_PAD_KEY_COL5__GPIO4_IO02 0x79 + MX6SL_PAD_KEY_ROW6__GPIO4_IO05 0x79 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x4001f8b1 + MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x4001f8b1 + >; + }; + + pinctrl_i2c1_sleep: i2c1grp-sleep { + fsl,pins = < + MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x400108b1 + MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x400108b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x4001f8b1 + MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x4001f8b1 + >; + }; + + pinctrl_i2c2_sleep: i2c2grp-sleep { + fsl,pins = < + MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x400108b1 + MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x400108b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6SL_PAD_REF_CLK_24M__I2C3_SCL 0x4001f8b1 + MX6SL_PAD_REF_CLK_32K__I2C3_SDA 0x4001f8b1 + >; + }; + + pinctrl_led: ledgrp { + fsl,pins = < + MX6SL_PAD_SD1_DAT2__GPIO5_IO13 0x17059 + >; + }; + + pinctrl_ricoh_gpio: ricoh_gpiogrp { + fsl,pins = < + MX6SL_PAD_SD1_CLK__GPIO5_IO15 0x1b8b1 /* ricoh619 chg */ + MX6SL_PAD_SD1_DAT0__GPIO5_IO11 0x1b8b1 /* ricoh619 irq */ + MX6SL_PAD_KEY_COL2__GPIO3_IO28 0x1b8b1 /* ricoh619 bat_low_int */ + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1 + MX6SL_PAD_UART1_RXD__UART1_TX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x13059 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp-100mhz { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x170b9 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x130b9 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp-200mhz { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x170f9 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x130f9 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc2_sleep: usdhc2grp-sleep { + fsl,pins = < + MX6SL_PAD_SD2_CMD__GPIO5_IO04 0x100f9 + MX6SL_PAD_SD2_CLK__GPIO5_IO05 0x100f9 + MX6SL_PAD_SD2_DAT0__GPIO5_IO01 0x100f9 + MX6SL_PAD_SD2_DAT1__GPIO4_IO30 0x100f9 + MX6SL_PAD_SD2_DAT2__GPIO5_IO03 0x100f9 + MX6SL_PAD_SD2_DAT3__GPIO4_IO28 0x100f9 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x11059 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x11059 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x11059 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x11059 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x11059 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x11059 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp-100mhz { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x170b9 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x170b9 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp-200mhz { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x170f9 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc3_sleep: usdhc3grp-sleep { + fsl,pins = < + MX6SL_PAD_SD3_CMD__GPIO5_IO21 0x100c1 + MX6SL_PAD_SD3_CLK__GPIO5_IO18 0x100c1 + MX6SL_PAD_SD3_DAT0__GPIO5_IO19 0x100c1 + MX6SL_PAD_SD3_DAT1__GPIO5_IO20 0x100c1 + MX6SL_PAD_SD3_DAT2__GPIO5_IO16 0x100c1 + MX6SL_PAD_SD3_DAT3__GPIO5_IO17 0x100c1 + >; + }; + + pinctrl_wifi_power: wifi-powergrp { + fsl,pins = < + MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x10059 /* WIFI_3V3_ON */ + >; + }; + + pinctrl_wifi_reset: wifi-resetgrp { + fsl,pins = < + MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x10059 /* WIFI_RST */ + >; + }; + + pinctrl_zforce: zforcegrp { + fsl,pins = < + MX6SL_PAD_SD1_DAT3__GPIO5_IO06 0x17059 /* TP_INT */ + MX6SL_PAD_SD1_DAT5__GPIO5_IO09 0x10059 /* TP_RST */ + >; + }; +}; + +®_vdd1p1 { + vin-supply = <&dcdc2_reg>; +}; + +®_vdd2p5 { + vin-supply = <&dcdc2_reg>; +}; + +®_arm { + vin-supply = <&dcdc3_reg>; +}; + +®_soc { + vin-supply = <&dcdc1_reg>; +}; + +®_pu { + vin-supply = <&dcdc1_reg>; +}; + +&snvs_rtc { + /* + * We are using the RTC in the PMIC, but this one is not disabled + * in imx6sl.dtsi. + */ + status = "disabled"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + pinctrl-3 = <&pinctrl_usdhc2_sleep>; + non-removable; + status = "okay"; + + /* internal uSD card */ +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + pinctrl-3 = <&pinctrl_usdhc3_sleep>; + vmmc-supply = <®_wifi>; + mmc-pwrseq = <&wifi_pwrseq>; + cap-power-off-card; + non-removable; + status = "okay"; + + /* + * 37NB-E60QF0+4A2: CyberTan WC121 (BCM43362) SDIO WiFi + * 37NB-E60QF0+4A3: RTL8189F SDIO WiFi + */ +}; + +&usbotg1 { + pinctrl-names = "default"; + disable-over-current; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 1c7180f28539..91a8c54d5e11 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -939,8 +939,10 @@ }; rngb: rngb@21b4000 { + compatible = "fsl,imx6sl-rngb", "fsl,imx25-rngb"; reg = <0x021b4000 0x4000>; interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_DUMMY>; }; weim: weim@21b8000 { diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-evk.dts index c755cbdb7cde..32b3d82fec53 100644 --- a/arch/arm/boot/dts/imx6sll-evk.dts +++ b/arch/arm/boot/dts/imx6sll-evk.dts @@ -132,6 +132,31 @@ }; }; }; + + sound { + compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hp>; + model = "wm8962-audio"; + audio-cpu = <&ssi2>; + audio-codec = <&wm8962>; + audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "Ext Spk", "SPKOUTL", + "Ext Spk", "SPKOUTR", + "AMIC", "MICBIAS", + "IN3R", "AMIC"; + mux-int-port = <2>; + mux-ext-port = <3>; + hp-det-gpio = <&gpio4 24 GPIO_ACTIVE_LOW>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux3>; + status = "okay"; }; &cpu0 { @@ -247,6 +272,27 @@ }; }; +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + wm8962: audio-codec@1a { + compatible = "wlf,wm8962"; + reg = <0x1a>; + clocks = <&clks IMX6SLL_CLK_EXTERN_AUDIO>; + DCVDD-supply = <&vgen3_reg>; + DBVDD-supply = <®_aud3v>; + AVDD-supply = <&vgen3_reg>; + CPVDD-supply = <&vgen3_reg>; + MICVDD-supply = <®_aud3v>; + PLLVDD-supply = <&vgen3_reg>; + SPKVDD1-supply = <®_aud4v>; + SPKVDD2-supply = <®_aud4v>; + }; +}; + &lcdif { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcd>; @@ -274,6 +320,10 @@ status = "okay"; }; +&ssi2 { + status = "okay"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; @@ -330,6 +380,22 @@ }; &iomuxc { + pinctrl_audmux3: audmux3grp { + fsl,pins = < + MX6SLL_PAD_AUD_TXC__AUD3_TXC 0x4130b0 + MX6SLL_PAD_AUD_TXFS__AUD3_TXFS 0x4130b0 + MX6SLL_PAD_AUD_TXD__AUD3_TXD 0x4110b0 + MX6SLL_PAD_AUD_RXD__AUD3_RXD 0x4130b0 + MX6SLL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x4130b0 + >; + }; + + pinctrl_hp: hpgrp { + fsl,pins = < + MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24 0x17059 /* HP DETECT */ + >; + }; + pinctrl_reg_sd3_vmmc: sd3vmmcgrp { fsl,pins = < MX6SLL_PAD_KEY_COL6__GPIO4_IO04 0x17059 @@ -449,6 +515,13 @@ >; }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6SLL_PAD_AUD_RXFS__I2C3_SCL 0x4041b8b1 + MX6SLL_PAD_AUD_RXC__I2C3_SDA 0x4041b8b1 + >; + }; + pinctrl_lcd: lcdgrp { fsl,pins = < MX6SLL_PAD_LCD_DATA00__LCD_DATA00 0x79 diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi index fb5d3bc50c6b..0b622201a1f3 100644 --- a/arch/arm/boot/dts/imx6sll.dtsi +++ b/arch/arm/boot/dts/imx6sll.dtsi @@ -786,6 +786,13 @@ clocks = <&clks IMX6SLL_CLK_MMDC_P0_IPG>; }; + rngb: rng@21b4000 { + compatible = "fsl,imx6sll-rngb", "fsl,imx25-rngb"; + reg = <0x021b4000 0x4000>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_DUMMY>; + }; + ocotp: efuse@21bc000 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi index b8c23eba9dc7..1351d7f70a54 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dtsi +++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi @@ -153,6 +153,8 @@ sound { compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hp>; model = "wm8962-audio"; ssi-controller = <&ssi2>; audio-codec = <&codec>; @@ -165,6 +167,7 @@ "IN3R", "AMIC"; mux-int-port = <2>; mux-ext-port = <6>; + hp-det-gpio = <&gpio1 17 GPIO_ACTIVE_LOW>; }; panel { @@ -468,6 +471,12 @@ >; }; + pinctrl_hp: hpgrp { + fsl,pins = < + MX6SX_PAD_CSI_DATA03__GPIO1_IO_17 0x17059 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1 diff --git a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts index d25e27d0315f..5547916870c7 100644 --- a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts +++ b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts @@ -93,7 +93,7 @@ &ecspi4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi4>; - cs-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio7 4 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index b480dfa9e251..dfdca1804f9f 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -213,7 +213,7 @@ clocks = <&clks IMX6SX_CLK_APBH_DMA>; }; - gpmi: gpmi-nand@1806000{ + gpmi: nand-controller@1806000{ compatible = "fsl,imx6sx-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi index a35be2a369b3..770f59b23102 100644 --- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi +++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi @@ -84,7 +84,7 @@ }; &ecspi1 { - cs-gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi index 61ba21a605a8..2a449a3c1ae2 100644 --- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi +++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi @@ -14,7 +14,7 @@ }; &ecspi2 { - cs-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi index 8d5f8dc6ad58..f1513e676c2f 100644 --- a/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi +++ b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi @@ -106,7 +106,7 @@ &ecspi3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; - cs-gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 2b088f210331..d7d9f3e46b92 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -174,7 +174,7 @@ clocks = <&clks IMX6UL_CLK_APBHDMA>; }; - gpmi: gpmi-nand@1806000 { + gpmi: nand-controller@1806000 { compatible = "fsl,imx6q-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi index 6cf95939121d..4436556624d6 100644 --- a/arch/arm/boot/dts/imx6ull-colibri.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi @@ -68,7 +68,7 @@ /* Colibri SPI */ &ecspi1 { - cs-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>; }; diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi index fcde7f77ae42..9bf67490ac49 100644 --- a/arch/arm/boot/dts/imx6ull.dtsi +++ b/arch/arm/boot/dts/imx6ull.dtsi @@ -68,6 +68,13 @@ clock-names = "dcp"; }; + rngb: rng@2284000 { + compatible = "fsl,imx6ull-rngb", "fsl,imx25-rngb"; + reg = <0x02284000 0x4000>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_DUMMY>; + }; + iomuxc_snvs: iomuxc-snvs@2290000 { compatible = "fsl,imx6ull-iomuxc-snvs"; reg = <0x02290000 0x4000>; diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi index e18e89dec879..62b771c1d5a9 100644 --- a/arch/arm/boot/dts/imx7-colibri.dtsi +++ b/arch/arm/boot/dts/imx7-colibri.dtsi @@ -60,7 +60,7 @@ &ecspi3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs>; - cs-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; }; &fec1 { diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 17cca8a9f77b..ac0751bc1177 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -146,6 +146,24 @@ }; }; }; + + sound { + compatible = "fsl,imx7d-evk-wm8960", + "fsl,imx-audio-wm8960"; + model = "wm8960-audio"; + audio-cpu = <&sai1>; + audio-codec = <&codec>; + hp-det-gpio = <&gpio2 28 GPIO_ACTIVE_HIGH>; + audio-routing = + "Headphone Jack", "HP_L", + "Headphone Jack", "HP_R", + "Ext Spk", "SPK_LP", + "Ext Spk", "SPK_LN", + "Ext Spk", "SPK_RP", + "Ext Spk", "SPK_RN", + "LINPUT1", "AMIC", + "AMIC", "MICB"; + }; }; &adc1 { @@ -169,7 +187,7 @@ &ecspi3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; - cs-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; status = "okay"; tsc2046@0 { @@ -363,6 +381,13 @@ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; clock-names = "mclk"; wlf,shared-lrclk; + wlf,hp-cfg = <2 2 3>; + wlf,gpio-cfg = <1 3>; + assigned-clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_SRC>, + <&clks IMX7D_PLL_AUDIO_POST_DIV>, + <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>; + assigned-clock-rates = <0>, <884736000>, <12288000>; }; }; @@ -391,6 +416,28 @@ vin-supply = <&sw2_reg>; }; +&sai1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai1>; + assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>, + <&clks IMX7D_PLL_AUDIO_POST_DIV>, + <&clks IMX7D_SAI1_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>; + assigned-clock-rates = <0>, <884736000>, <36864000>; + status = "okay"; +}; + +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3 &pinctrl_sai3_mclk>; + assigned-clocks = <&clks IMX7D_SAI3_ROOT_SRC>, + <&clks IMX7D_PLL_AUDIO_POST_DIV>, + <&clks IMX7D_SAI3_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>; + assigned-clock-rates = <0>, <884736000>, <36864000>; + status = "okay"; +}; + &snvs_pwrkey { status = "okay"; }; @@ -550,6 +597,7 @@ pinctrl_hog: hoggrp { fsl,pins = < MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x34 /* bt reg on */ + MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x59 /* headphone detect */ >; }; @@ -615,6 +663,33 @@ >; }; + pinctrl_sai1: sai1grp { + fsl,pins = < + MX7D_PAD_SAI1_MCLK__SAI1_MCLK 0x1f + MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f + MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC 0x1f + MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x30 + MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x1f + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + MX7D_PAD_SAI2_TX_BCLK__SAI2_TX_BCLK 0x1f + MX7D_PAD_SAI2_TX_SYNC__SAI2_TX_SYNC 0x1f + MX7D_PAD_SAI2_TX_DATA__SAI2_TX_DATA0 0x30 + MX7D_PAD_SAI2_RX_DATA__SAI2_RX_DATA0 0x1f + >; + }; + + pinctrl_sai3: sai3grp { + fsl,pins = < + MX7D_PAD_UART3_TX_DATA__SAI3_TX_BCLK 0x1f + MX7D_PAD_UART3_CTS_B__SAI3_TX_SYNC 0x1f + MX7D_PAD_UART3_RTS_B__SAI3_TX_DATA0 0x30 + >; + }; + pinctrl_spi4: spi4grp { fsl,pins = < MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x59 @@ -776,4 +851,10 @@ MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x14 >; }; + + pinctrl_sai3_mclk: sai3grp_mclk { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO03__SAI3_MCLK 0x1f + >; + }; }; diff --git a/arch/arm/boot/dts/imx7d-zii-rmu2.dts b/arch/arm/boot/dts/imx7d-zii-rmu2.dts index 7cb6153fc650..1065941807e8 100644 --- a/arch/arm/boot/dts/imx7d-zii-rmu2.dts +++ b/arch/arm/boot/dts/imx7d-zii-rmu2.dts @@ -39,7 +39,7 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - cs-gpios = <&gpio4 19 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>; status = "okay"; flash@0 { diff --git a/arch/arm/boot/dts/imx7d-zii-rpu2.dts b/arch/arm/boot/dts/imx7d-zii-rpu2.dts index cbf0dbb4c198..893bd30aa2a3 100644 --- a/arch/arm/boot/dts/imx7d-zii-rpu2.dts +++ b/arch/arm/boot/dts/imx7d-zii-rpu2.dts @@ -193,7 +193,7 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - cs-gpios = <&gpio4 19 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>; status = "okay"; flash@0 { diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 1cfaf410aa43..84d9cc13afb9 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -1162,6 +1162,19 @@ status = "disabled"; }; + qspi: spi@30bb0000 { + compatible = "fsl,imx7d-qspi"; + reg = <0x30bb0000 0x10000>, <0x60000000 0x10000000>; + reg-names = "QuadSPI", "QuadSPI-memory"; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_QSPI_ROOT_CLK>, + <&clks IMX7D_QSPI_ROOT_CLK>; + clock-names = "qspi_en", "qspi"; + status = "disabled"; + }; + sdma: sdma@30bd0000 { compatible = "fsl,imx7d-sdma", "fsl,imx35-sdma"; reg = <0x30bd0000 0x10000>; @@ -1208,7 +1221,7 @@ clocks = <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>; }; - gpmi: gpmi-nand@33002000{ + gpmi: nand-controller@33002000{ compatible = "fsl,imx7d-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi b/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi index 395e05f10d36..7d0468a23781 100644 --- a/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi @@ -79,7 +79,7 @@ }; &dss { - status = "ok"; + status = "okay"; vdds_dsi-supply = <&vpll2>; vdda_video-supply = <&video_reg>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi index b0f6613e6d54..533a47bc4a53 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi @@ -115,7 +115,7 @@ }; &dss { - status = "ok"; + status = "okay"; vdds_dsi-supply = <&vpll2>; vdda_video-supply = <&vpll2>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index eadb0832bcfc..7649dd1e0b9e 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -11,13 +11,6 @@ #size-cells = <1>; interrupt-parent = <&gic>; - L2: cache-controller@c4200000 { - compatible = "arm,pl310-cache"; - reg = <0xc4200000 0x1000>; - cache-unified; - cache-level = <2>; - }; - soc { compatible = "simple-bus"; #address-cells = <1>; @@ -172,6 +165,13 @@ }; }; + L2: cache-controller@c4200000 { + compatible = "arm,pl310-cache"; + reg = <0xc4200000 0x1000>; + cache-unified; + cache-level = <2>; + }; + periph: bus@c4300000 { compatible = "simple-bus"; reg = <0xc4300000 0x10000>; diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index 277c0bb10453..04688e8abce2 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -240,8 +240,6 @@ <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi index 1990239cc6af..d5ded4f794df 100644 --- a/arch/arm/boot/dts/motorola-mapphone-common.dtsi +++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi @@ -207,8 +207,9 @@ }; }; - lcd0: display { - compatible = "panel-dsi-cm"; + lcd0: panel@0 { + compatible = "motorola,droid4-panel", "panel-dsi-cm"; + reg = <0>; label = "lcd0"; vddi-supply = <&lcd_regulator>; reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */ @@ -217,6 +218,7 @@ width-mm = <50>; height-mm = <89>; + rotation = <90>; panel-timing { clock-frequency = <0>; /* Calculated by dsi */ diff --git a/arch/arm/boot/dts/mpa1600.dts b/arch/arm/boot/dts/mpa1600.dts index a5c91c240db9..005c2758e229 100644 --- a/arch/arm/boot/dts/mpa1600.dts +++ b/arch/arm/boot/dts/mpa1600.dts @@ -11,7 +11,7 @@ model = "Phontech MPA 1600"; compatible = "phontech,mpa1600", "atmel,at91rm9200"; - memory { + memory@20000000 { reg = <0x20000000 0x4000000>; }; diff --git a/arch/arm/boot/dts/mps2.dtsi b/arch/arm/boot/dts/mps2.dtsi index 96fb5a5cf4d3..37f5023f529c 100644 --- a/arch/arm/boot/dts/mps2.dtsi +++ b/arch/arm/boot/dts/mps2.dtsi @@ -161,9 +161,11 @@ }; timer2: dual-timer@2000 { - compatible = "arm,sp804"; + compatible = "arm,sp804", "arm,primecell"; reg = <0x2000 0x1000>; - clocks = <&sysclk>; + clocks = <&sysclk>, <&sysclk>, <&sysclk>; + clock-names = "timer0clk", "timer1clk", + "apb_pclk"; interrupts = <10>; status = "disabled"; }; @@ -197,8 +199,8 @@ arm,primecell-periphid = <0x00141805>; reg = <0x8000 0x1000>; interrupts = <0>; - clocks = <&sysclk>; - clock-names = "apb_pclk"; + clocks = <&sysclk>, <&sysclk>; + clock-names = "wdog_clk", "apb_pclk"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/infinity-msc313-breadbee_crust.dts b/arch/arm/boot/dts/mstar-infinity-msc313-breadbee_crust.dts index f24c5580d3e4..f9db2ff86f2d 100644 --- a/arch/arm/boot/dts/infinity-msc313-breadbee_crust.dts +++ b/arch/arm/boot/dts/mstar-infinity-msc313-breadbee_crust.dts @@ -5,7 +5,7 @@ */ /dts-v1/; -#include "infinity-msc313.dtsi" +#include "mstar-infinity-msc313.dtsi" / { model = "BreadBee Crust"; diff --git a/arch/arm/boot/dts/infinity3-msc313e.dtsi b/arch/arm/boot/dts/mstar-infinity-msc313.dtsi index 4e7239afd823..3499fde263be 100644 --- a/arch/arm/boot/dts/infinity3-msc313e.dtsi +++ b/arch/arm/boot/dts/mstar-infinity-msc313.dtsi @@ -4,7 +4,7 @@ * Author: Daniel Palmer <daniel@thingy.jp> */ -#include "infinity3.dtsi" +#include "mstar-infinity.dtsi" / { memory@20000000 { diff --git a/arch/arm/boot/dts/infinity.dtsi b/arch/arm/boot/dts/mstar-infinity.dtsi index cd911adef014..cd911adef014 100644 --- a/arch/arm/boot/dts/infinity.dtsi +++ b/arch/arm/boot/dts/mstar-infinity.dtsi diff --git a/arch/arm/boot/dts/infinity3-msc313e-breadbee.dts b/arch/arm/boot/dts/mstar-infinity3-msc313e-breadbee.dts index 1f93401c8530..f0eda80a95cc 100644 --- a/arch/arm/boot/dts/infinity3-msc313e-breadbee.dts +++ b/arch/arm/boot/dts/mstar-infinity3-msc313e-breadbee.dts @@ -5,7 +5,7 @@ */ /dts-v1/; -#include "infinity3-msc313e.dtsi" +#include "mstar-infinity3-msc313e.dtsi" / { model = "BreadBee"; diff --git a/arch/arm/boot/dts/mercury5-ssc8336n.dtsi b/arch/arm/boot/dts/mstar-infinity3-msc313e.dtsi index 7d4a4630c25c..f581b6f89555 100644 --- a/arch/arm/boot/dts/mercury5-ssc8336n.dtsi +++ b/arch/arm/boot/dts/mstar-infinity3-msc313e.dtsi @@ -4,7 +4,7 @@ * Author: Daniel Palmer <daniel@thingy.jp> */ -#include "mercury5.dtsi" +#include "mstar-infinity3.dtsi" / { memory@20000000 { diff --git a/arch/arm/boot/dts/infinity3.dtsi b/arch/arm/boot/dts/mstar-infinity3.dtsi index 9b918c802654..9857e2a9934d 100644 --- a/arch/arm/boot/dts/infinity3.dtsi +++ b/arch/arm/boot/dts/mstar-infinity3.dtsi @@ -4,7 +4,7 @@ * Author: Daniel Palmer <daniel@thingy.jp> */ -#include "infinity.dtsi" +#include "mstar-infinity.dtsi" &imi { reg = <0xa0000000 0x20000>; diff --git a/arch/arm/boot/dts/mercury5-ssc8336n-midrived08.dts b/arch/arm/boot/dts/mstar-mercury5-ssc8336n-midrived08.dts index f24bd8cb8e60..7306b737d9c4 100644 --- a/arch/arm/boot/dts/mercury5-ssc8336n-midrived08.dts +++ b/arch/arm/boot/dts/mstar-mercury5-ssc8336n-midrived08.dts @@ -5,7 +5,7 @@ */ /dts-v1/; -#include "mercury5-ssc8336n.dtsi" +#include "mstar-mercury5-ssc8336n.dtsi" / { model = "70mai Midrive D08"; diff --git a/arch/arm/boot/dts/infinity-msc313.dtsi b/arch/arm/boot/dts/mstar-mercury5-ssc8336n.dtsi index 42f2b5552c77..3f5a4c029744 100644 --- a/arch/arm/boot/dts/infinity-msc313.dtsi +++ b/arch/arm/boot/dts/mstar-mercury5-ssc8336n.dtsi @@ -4,7 +4,7 @@ * Author: Daniel Palmer <daniel@thingy.jp> */ -#include "infinity.dtsi" +#include "mstar-mercury5.dtsi" / { memory@20000000 { diff --git a/arch/arm/boot/dts/mercury5.dtsi b/arch/arm/boot/dts/mstar-mercury5.dtsi index a7d0dd9d6132..a7d0dd9d6132 100644 --- a/arch/arm/boot/dts/mercury5.dtsi +++ b/arch/arm/boot/dts/mstar-mercury5.dtsi diff --git a/arch/arm/boot/dts/mstar-v7.dtsi b/arch/arm/boot/dts/mstar-v7.dtsi index 3b7b9b793736..f07880561e11 100644 --- a/arch/arm/boot/dts/mstar-v7.dtsi +++ b/arch/arm/boot/dts/mstar-v7.dtsi @@ -85,6 +85,25 @@ mask = <0x79>; }; + intc_fiq: interrupt-controller@201310 { + compatible = "mstar,mst-intc"; + reg = <0x201310 0x40>; + #interrupt-cells = <3>; + interrupt-controller; + interrupt-parent = <&gic>; + mstar,irqs-map-range = <96 127>; + }; + + intc_irq: interrupt-controller@201350 { + compatible = "mstar,mst-intc"; + reg = <0x201350 0x40>; + #interrupt-cells = <3>; + interrupt-controller; + interrupt-parent = <&gic>; + mstar,irqs-map-range = <32 95>; + mstar,intc-no-eoi; + }; + l3bridge: l3bridge@204400 { compatible = "mstar,l3bridge"; reg = <0x204400 0x200>; @@ -94,6 +113,7 @@ compatible = "ns16550a"; reg = <0x221000 0x100>; reg-shift = <3>; + interrupts-extended = <&intc_irq GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <172000000>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi index 39b3a2f4bef4..fade14284017 100644 --- a/arch/arm/boot/dts/mt2701.dtsi +++ b/arch/arm/boot/dts/mt2701.dtsi @@ -569,6 +569,19 @@ <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>; }; + jpegenc: jpegenc@1500a000 { + compatible = "mediatek,mt2701-jpgenc", + "mediatek,mtk-jpgenc"; + reg = <0 0x1500a000 0 0x1000>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_LOW>; + clocks = <&imgsys CLK_IMG_VENC>; + clock-names = "jpgenc"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; + mediatek,larb = <&larb2>; + iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>, + <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>; + }; + vdecsys: syscon@16000000 { compatible = "mediatek,mt2701-vdecsys", "syscon"; reg = <0 0x16000000 0 0x1000>; diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index 3a6b856e5b74..aea6809500d7 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -14,7 +14,6 @@ #include <dt-bindings/power/mt2701-power.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/phy/phy.h> -#include <dt-bindings/memory/mt2701-larb-port.h> #include <dt-bindings/reset/mt2701-resets.h> #include <dt-bindings/thermal/thermal.h> @@ -297,17 +296,6 @@ clock-names = "system-clk", "rtc-clk"; }; - smi_common: smi@1000c000 { - compatible = "mediatek,mt7623-smi-common", - "mediatek,mt2701-smi-common"; - reg = <0 0x1000c000 0 0x1000>; - clocks = <&infracfg CLK_INFRA_SMI>, - <&mmsys CLK_MM_SMI_COMMON>, - <&infracfg CLK_INFRA_SMI>; - clock-names = "apb", "smi", "async"; - power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>; - }; - pwrap: pwrap@1000d000 { compatible = "mediatek,mt7623-pwrap", "mediatek,mt2701-pwrap"; @@ -339,17 +327,6 @@ reg = <0 0x10200100 0 0x1c>; }; - iommu: mmsys_iommu@10205000 { - compatible = "mediatek,mt7623-m4u", - "mediatek,mt2701-m4u"; - reg = <0 0x10205000 0 0x1000>; - interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>; - clocks = <&infracfg CLK_INFRA_M4U>; - clock-names = "bclk"; - mediatek,larbs = <&larb0 &larb1 &larb2>; - #iommu-cells = <1>; - }; - efuse: efuse@10206000 { compatible = "mediatek,mt7623-efuse", "mediatek,mt8173-efuse"; @@ -725,94 +702,6 @@ status = "disabled"; }; - g3dsys: syscon@13000000 { - compatible = "mediatek,mt7623-g3dsys", - "mediatek,mt2701-g3dsys", - "syscon"; - reg = <0 0x13000000 0 0x200>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - mali: gpu@13040000 { - compatible = "mediatek,mt7623-mali", "arm,mali-450"; - reg = <0 0x13040000 0 0x30000>; - interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 171 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 172 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 173 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 174 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 175 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 176 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 177 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 178 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 179 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>; - interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", "pp1", - "ppmmu1", "pp2", "ppmmu2", "pp3", "ppmmu3", - "pp"; - clocks = <&topckgen CLK_TOP_MMPLL>, - <&g3dsys CLK_G3DSYS_CORE>; - clock-names = "bus", "core"; - power-domains = <&scpsys MT2701_POWER_DOMAIN_MFG>; - resets = <&g3dsys MT2701_G3DSYS_CORE_RST>; - }; - - mmsys: syscon@14000000 { - compatible = "mediatek,mt7623-mmsys", - "mediatek,mt2701-mmsys", - "syscon"; - reg = <0 0x14000000 0 0x1000>; - #clock-cells = <1>; - }; - - larb0: larb@14010000 { - compatible = "mediatek,mt7623-smi-larb", - "mediatek,mt2701-smi-larb"; - reg = <0 0x14010000 0 0x1000>; - mediatek,smi = <&smi_common>; - mediatek,larb-id = <0>; - clocks = <&mmsys CLK_MM_SMI_LARB0>, - <&mmsys CLK_MM_SMI_LARB0>; - clock-names = "apb", "smi"; - power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>; - }; - - imgsys: syscon@15000000 { - compatible = "mediatek,mt7623-imgsys", - "mediatek,mt2701-imgsys", - "syscon"; - reg = <0 0x15000000 0 0x1000>; - #clock-cells = <1>; - }; - - larb2: larb@15001000 { - compatible = "mediatek,mt7623-smi-larb", - "mediatek,mt2701-smi-larb"; - reg = <0 0x15001000 0 0x1000>; - mediatek,smi = <&smi_common>; - mediatek,larb-id = <2>; - clocks = <&imgsys CLK_IMG_SMI_COMM>, - <&imgsys CLK_IMG_SMI_COMM>; - clock-names = "apb", "smi"; - power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; - }; - - jpegdec: jpegdec@15004000 { - compatible = "mediatek,mt7623-jpgdec", - "mediatek,mt2701-jpgdec"; - reg = <0 0x15004000 0 0x1000>; - interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>; - clocks = <&imgsys CLK_IMG_JPGDEC_SMI>, - <&imgsys CLK_IMG_JPGDEC>; - clock-names = "jpgdec-smi", - "jpgdec"; - power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; - mediatek,larb = <&larb2>; - iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>, - <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>; - }; - vdecsys: syscon@16000000 { compatible = "mediatek,mt7623-vdecsys", "mediatek,mt2701-vdecsys", @@ -821,18 +710,6 @@ #clock-cells = <1>; }; - larb1: larb@16010000 { - compatible = "mediatek,mt7623-smi-larb", - "mediatek,mt2701-smi-larb"; - reg = <0 0x16010000 0 0x1000>; - mediatek,smi = <&smi_common>; - mediatek,larb-id = <1>; - clocks = <&vdecsys CLK_VDEC_CKGEN>, - <&vdecsys CLK_VDEC_LARB>; - clock-names = "apb", "smi"; - power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>; - }; - hifsys: syscon@1a000000 { compatible = "mediatek,mt7623-hifsys", "mediatek,mt2701-hifsys", diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts index 2b760f90f38c..e96aa0ed1ebd 100644 --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts @@ -6,7 +6,7 @@ /dts-v1/; #include <dt-bindings/input/input.h> -#include "mt7623.dtsi" +#include "mt7623n.dtsi" #include "mt6323.dtsi" / { @@ -21,6 +21,19 @@ stdout-path = "serial2:115200n8"; }; + connector { + compatible = "hdmi-connector"; + label = "hdmi"; + type = "d"; + ddc-i2c-bus = <&hdmiddc0>; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi0_out>; + }; + }; + }; + cpus { cpu@0 { proc-supply = <&mt6323_vproc_reg>; @@ -66,6 +79,13 @@ regulator-always-on; }; + reg_vgpu: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vdd_fixed_vgpu"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -114,10 +134,18 @@ }; }; +&bls { + status = "okay"; +}; + &btif { status = "okay"; }; +&cec { + status = "okay"; +}; + &cir { pinctrl-names = "default"; pinctrl-0 = <&cir_pins_a>; @@ -128,6 +156,21 @@ status = "okay"; }; +&dpi0 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + dpi0_out: endpoint { + remote-endpoint = <&hdmi0_in>; + }; + }; + }; +}; + ð { status = "okay"; @@ -192,6 +235,7 @@ fixed-link { speed = <1000>; full-duplex; + pause; }; }; }; @@ -199,6 +243,42 @@ }; }; +&hdmi0 { + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_pins_a>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + hdmi0_in: endpoint { + remote-endpoint = <&dpi0_out>; + }; + }; + + port@1 { + reg = <1>; + hdmi0_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; +}; + +&hdmiddc0 { + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_ddc_pins_a>; + status = "okay"; +}; + +&hdmi_phy { + mediatek,ibias = <0xa>; + mediatek,ibias_up = <0x1c>; + status = "okay"; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; @@ -211,6 +291,11 @@ status = "okay"; }; +&mali { + mali-supply = <®_vgpu>; + status = "okay"; +}; + &mmc0 { pinctrl-names = "default", "state_uhs"; pinctrl-0 = <&mmc0_pins_default>; @@ -330,4 +415,3 @@ &u3phy2 { status = "okay"; }; - diff --git a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts index 0447748f9fa0..1b9b9a8145a7 100644 --- a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts +++ b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts @@ -7,7 +7,7 @@ /dts-v1/; #include <dt-bindings/input/input.h> -#include "mt7623.dtsi" +#include "mt7623n.dtsi" #include "mt6323.dtsi" / { @@ -24,6 +24,19 @@ stdout-path = "serial2:115200n8"; }; + connector { + compatible = "hdmi-connector"; + label = "hdmi"; + type = "d"; + ddc-i2c-bus = <&hdmiddc0>; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi0_out>; + }; + }; + }; + cpus { cpu@0 { proc-supply = <&mt6323_vproc_reg>; @@ -106,10 +119,18 @@ }; }; +&bls { + status = "okay"; +}; + &btif { status = "okay"; }; +&cec { + status = "okay"; +}; + &cir { pinctrl-names = "default"; pinctrl-0 = <&cir_pins_a>; @@ -120,6 +141,21 @@ status = "okay"; }; +&dpi0 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + dpi0_out: endpoint { + remote-endpoint = <&hdmi0_in>; + }; + }; + }; +}; + ð { status = "okay"; @@ -203,6 +239,42 @@ }; }; +&hdmi0 { + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_pins_a>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + hdmi0_in: endpoint { + remote-endpoint = <&dpi0_out>; + }; + }; + + port@1 { + reg = <1>; + hdmi0_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; +}; + +&hdmiddc0 { + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_ddc_pins_a>; + status = "okay"; +}; + +&hdmi_phy { + mediatek,ibias = <0xa>; + mediatek,ibias_up = <0x1c>; + status = "okay"; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; diff --git a/arch/arm/boot/dts/mt7623n.dtsi b/arch/arm/boot/dts/mt7623n.dtsi new file mode 100644 index 000000000000..1880ac9e32cf --- /dev/null +++ b/arch/arm/boot/dts/mt7623n.dtsi @@ -0,0 +1,306 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright © 2017-2020 MediaTek Inc. + * Author: Sean Wang <sean.wang@mediatek.com> + * Ryder Lee <ryder.lee@mediatek.com> + * + */ + +#include "mt7623.dtsi" +#include <dt-bindings/memory/mt2701-larb-port.h> + +/ { + aliases { + rdma0 = &rdma0; + rdma1 = &rdma1; + }; + + g3dsys: syscon@13000000 { + compatible = "mediatek,mt7623-g3dsys", + "mediatek,mt2701-g3dsys", + "syscon"; + reg = <0 0x13000000 0 0x200>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + mali: gpu@13040000 { + compatible = "mediatek,mt7623-mali", "arm,mali-450"; + reg = <0 0x13040000 0 0x30000>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 171 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 172 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 173 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 174 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 175 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 176 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 177 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 178 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 179 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", "pp1", + "ppmmu1", "pp2", "ppmmu2", "pp3", "ppmmu3", + "pp"; + clocks = <&topckgen CLK_TOP_MMPLL>, + <&g3dsys CLK_G3DSYS_CORE>; + clock-names = "bus", "core"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_MFG>; + resets = <&g3dsys MT2701_G3DSYS_CORE_RST>; + }; + + mmsys: syscon@14000000 { + compatible = "mediatek,mt7623-mmsys", + "mediatek,mt2701-mmsys", + "syscon"; + reg = <0 0x14000000 0 0x1000>; + #clock-cells = <1>; + }; + + larb0: larb@14010000 { + compatible = "mediatek,mt7623-smi-larb", + "mediatek,mt2701-smi-larb"; + reg = <0 0x14010000 0 0x1000>; + mediatek,smi = <&smi_common>; + mediatek,larb-id = <0>; + clocks = <&mmsys CLK_MM_SMI_LARB0>, + <&mmsys CLK_MM_SMI_LARB0>; + clock-names = "apb", "smi"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>; + }; + + larb1: larb@16010000 { + compatible = "mediatek,mt7623-smi-larb", + "mediatek,mt2701-smi-larb"; + reg = <0 0x16010000 0 0x1000>; + mediatek,smi = <&smi_common>; + mediatek,larb-id = <1>; + clocks = <&vdecsys CLK_VDEC_CKGEN>, + <&vdecsys CLK_VDEC_LARB>; + clock-names = "apb", "smi"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>; + }; + + larb2: larb@15001000 { + compatible = "mediatek,mt7623-smi-larb", + "mediatek,mt2701-smi-larb"; + reg = <0 0x15001000 0 0x1000>; + mediatek,smi = <&smi_common>; + mediatek,larb-id = <2>; + clocks = <&imgsys CLK_IMG_SMI_COMM>, + <&imgsys CLK_IMG_SMI_COMM>; + clock-names = "apb", "smi"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; + }; + + imgsys: syscon@15000000 { + compatible = "mediatek,mt7623-imgsys", + "mediatek,mt2701-imgsys", + "syscon"; + reg = <0 0x15000000 0 0x1000>; + #clock-cells = <1>; + }; + + iommu: mmsys_iommu@10205000 { + compatible = "mediatek,mt7623-m4u", + "mediatek,mt2701-m4u"; + reg = <0 0x10205000 0 0x1000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_M4U>; + clock-names = "bclk"; + mediatek,larbs = <&larb0 &larb1 &larb2>; + #iommu-cells = <1>; + }; + + jpegdec: jpegdec@15004000 { + compatible = "mediatek,mt7623-jpgdec", + "mediatek,mt2701-jpgdec"; + reg = <0 0x15004000 0 0x1000>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>; + clocks = <&imgsys CLK_IMG_JPGDEC_SMI>, + <&imgsys CLK_IMG_JPGDEC>; + clock-names = "jpgdec-smi", + "jpgdec"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; + mediatek,larb = <&larb2>; + iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>, + <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>; + }; + + smi_common: smi@1000c000 { + compatible = "mediatek,mt7623-smi-common", + "mediatek,mt2701-smi-common"; + reg = <0 0x1000c000 0 0x1000>; + clocks = <&infracfg CLK_INFRA_SMI>, + <&mmsys CLK_MM_SMI_COMMON>, + <&infracfg CLK_INFRA_SMI>; + clock-names = "apb", "smi", "async"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>; + }; + + ovl: ovl@14007000 { + compatible = "mediatek,mt7623-disp-ovl", + "mediatek,mt2701-disp-ovl"; + reg = <0 0x14007000 0 0x1000>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_LOW>; + clocks = <&mmsys CLK_MM_DISP_OVL>; + iommus = <&iommu MT2701_M4U_PORT_DISP_OVL_0>; + mediatek,larb = <&larb0>; + }; + + rdma0: rdma@14008000 { + compatible = "mediatek,mt7623-disp-rdma", + "mediatek,mt2701-disp-rdma"; + reg = <0 0x14008000 0 0x1000>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>; + clocks = <&mmsys CLK_MM_DISP_RDMA>; + iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA>; + mediatek,larb = <&larb0>; + }; + + wdma@14009000 { + compatible = "mediatek,mt7623-disp-wdma", + "mediatek,mt2701-disp-wdma"; + reg = <0 0x14009000 0 0x1000>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_LOW>; + clocks = <&mmsys CLK_MM_DISP_WDMA>; + iommus = <&iommu MT2701_M4U_PORT_DISP_WDMA>; + mediatek,larb = <&larb0>; + }; + + bls: pwm@1400a000 { + compatible = "mediatek,mt7623-disp-pwm", + "mediatek,mt2701-disp-pwm"; + reg = <0 0x1400a000 0 0x1000>; + #pwm-cells = <2>; + clocks = <&mmsys CLK_MM_MDP_BLS_26M>, + <&mmsys CLK_MM_DISP_BLS>; + clock-names = "main", "mm"; + status = "disabled"; + }; + + color: color@1400b000 { + compatible = "mediatek,mt7623-disp-color", + "mediatek,mt2701-disp-color"; + reg = <0 0x1400b000 0 0x1000>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_LOW>; + clocks = <&mmsys CLK_MM_DISP_COLOR>; + }; + + dsi: dsi@1400c000 { + compatible = "mediatek,mt7623-dsi", + "mediatek,mt2701-dsi"; + reg = <0 0x1400c000 0 0x1000>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_LOW>; + clocks = <&mmsys CLK_MM_DSI_ENGINE>, + <&mmsys CLK_MM_DSI_DIG>, + <&mipi_tx0>; + clock-names = "engine", "digital", "hs"; + phys = <&mipi_tx0>; + phy-names = "dphy"; + status = "disabled"; + }; + + mutex: mutex@1400e000 { + compatible = "mediatek,mt7623-disp-mutex", + "mediatek,mt2701-disp-mutex"; + reg = <0 0x1400e000 0 0x1000>; + interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_LOW>; + clocks = <&mmsys CLK_MM_MUTEX_32K>; + }; + + rdma1: rdma@14012000 { + compatible = "mediatek,mt7623-disp-rdma", + "mediatek,mt2701-disp-rdma"; + reg = <0 0x14012000 0 0x1000>; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_LOW>; + clocks = <&mmsys CLK_MM_DISP_RDMA1>; + iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA1>; + mediatek,larb = <&larb0>; + }; + + dpi0: dpi@14014000 { + compatible = "mediatek,mt7623-dpi", + "mediatek,mt2701-dpi"; + reg = <0 0x14014000 0 0x1000>; + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>; + clocks = <&mmsys CLK_MM_DPI1_DIGL>, + <&mmsys CLK_MM_DPI1_ENGINE>, + <&apmixedsys CLK_APMIXED_TVDPLL>; + clock-names = "pixel", "engine", "pll"; + status = "disabled"; + }; + + hdmi0: hdmi@14015000 { + compatible = "mediatek,mt7623-hdmi", + "mediatek,mt2701-hdmi"; + reg = <0 0x14015000 0 0x400>; + clocks = <&mmsys CLK_MM_HDMI_PIXEL>, + <&mmsys CLK_MM_HDMI_PLL>, + <&mmsys CLK_MM_HDMI_AUDIO>, + <&mmsys CLK_MM_HDMI_SPDIF>; + clock-names = "pixel", "pll", "bclk", "spdif"; + phys = <&hdmi_phy>; + phy-names = "hdmi"; + mediatek,syscon-hdmi = <&mmsys 0x900>; + cec = <&cec>; + status = "disabled"; + }; + + mipi_tx0: mipi-dphy@10010000 { + compatible = "mediatek,mt7623-mipi-tx", + "mediatek,mt2701-mipi-tx"; + reg = <0 0x10010000 0 0x90>; + clocks = <&clk26m>; + clock-output-names = "mipi_tx0_pll"; + #clock-cells = <0>; + #phy-cells = <0>; + }; + + cec: cec@10012000 { + compatible = "mediatek,mt7623-cec", + "mediatek,mt8173-cec"; + reg = <0 0x10012000 0 0xbc>; + interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_CEC>; + status = "disabled"; + }; + + hdmi_phy: phy@10209100 { + compatible = "mediatek,mt7623-hdmi-phy", + "mediatek,mt2701-hdmi-phy"; + reg = <0 0x10209100 0 0x24>; + clocks = <&apmixedsys CLK_APMIXED_HDMI_REF>; + clock-names = "pll_ref"; + clock-output-names = "hdmitx_dig_cts"; + #clock-cells = <0>; + #phy-cells = <0>; + status = "disabled"; + }; + + hdmiddc0: i2c@11013000 { + compatible = "mediatek,mt7623-hdmi-ddc", + "mediatek,mt8173-hdmi-ddc"; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>; + reg = <0 0x11013000 0 0x1C>; + clocks = <&pericfg CLK_PERI_I2C3>; + clock-names = "ddc-i2c"; + status = "disabled"; + }; +}; + +&pio { + hdmi_pins_a: hdmi-default { + pins-hdmi { + pinmux = <MT7623_PIN_123_HTPLG_FUNC_HTPLG>; + input-enable; + bias-pull-down; + }; + }; + + hdmi_ddc_pins_a: hdmi_ddc-default { + pins-hdmi-ddc { + pinmux = <MT7623_PIN_124_GPIO124_FUNC_HDMISCK>, + <MT7623_PIN_125_GPIO125_FUNC_HDMISD>; + }; + }; +}; diff --git a/arch/arm/boot/dts/nspire.dtsi b/arch/arm/boot/dts/nspire.dtsi index d9a0fd7524dc..90e033d9141f 100644 --- a/arch/arm/boot/dts/nspire.dtsi +++ b/arch/arm/boot/dts/nspire.dtsi @@ -145,15 +145,19 @@ timer0: timer@900C0000 { reg = <0x900C0000 0x1000>; - - clocks = <&timer_clk>; + clocks = <&timer_clk>, <&timer_clk>, + <&timer_clk>; + clock-names = "timer0clk", "timer1clk", + "apb_pclk"; }; timer1: timer@900D0000 { reg = <0x900D0000 0x1000>; interrupts = <19>; - - clocks = <&timer_clk>; + clocks = <&timer_clk>, <&timer_clk>, + <&timer_clk>; + clock-names = "timer0clk", "timer1clk", + "apb_pclk"; }; watchdog: watchdog@90060000 { diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 05077f3c75cd..252507cf300b 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -389,7 +389,7 @@ }; &dss { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = < @@ -406,7 +406,7 @@ }; &venc { - status = "ok"; + status = "okay"; vdda-supply = <&vdac>; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 79bc710c05fc..f9f34b8458e9 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -386,7 +386,7 @@ }; &dss { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dss_dpi_pins>; @@ -400,7 +400,7 @@ }; &venc { - status = "ok"; + status = "okay"; vdda-supply = <&vdac>; @@ -413,7 +413,7 @@ }; &gpmc { - status = "ok"; + status = "okay"; ranges = <0 0 0x30000000 0x1000000>; /* CS0 space, 16MB */ /* Chip select 0 */ diff --git a/arch/arm/boot/dts/omap3-cm-t3517.dts b/arch/arm/boot/dts/omap3-cm-t3517.dts index 632f52efdf98..3b8349094baa 100644 --- a/arch/arm/boot/dts/omap3-cm-t3517.dts +++ b/arch/arm/boot/dts/omap3-cm-t3517.dts @@ -147,7 +147,7 @@ }; &dss { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = < diff --git a/arch/arm/boot/dts/omap3-cm-t3530.dts b/arch/arm/boot/dts/omap3-cm-t3530.dts index 32dbaeaed147..bc545ee23e71 100644 --- a/arch/arm/boot/dts/omap3-cm-t3530.dts +++ b/arch/arm/boot/dts/omap3-cm-t3530.dts @@ -49,7 +49,7 @@ }; &dss { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = < diff --git a/arch/arm/boot/dts/omap3-cm-t3730.dts b/arch/arm/boot/dts/omap3-cm-t3730.dts index 683819bf0915..48e48b0c8190 100644 --- a/arch/arm/boot/dts/omap3-cm-t3730.dts +++ b/arch/arm/boot/dts/omap3-cm-t3730.dts @@ -87,7 +87,7 @@ }; &dss { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = < diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi index cdb632df152a..e61b8a2bfb7d 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi @@ -246,7 +246,7 @@ }; &venc { - status = "ok"; + status = "okay"; port { venc_out: endpoint { @@ -257,7 +257,7 @@ }; &mcbsp2 { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mcbsp2_pins>; diff --git a/arch/arm/boot/dts/omap3-cpu-thermal.dtsi b/arch/arm/boot/dts/omap3-cpu-thermal.dtsi index aee46fa8c055..1ed837859374 100644 --- a/arch/arm/boot/dts/omap3-cpu-thermal.dtsi +++ b/arch/arm/boot/dts/omap3-cpu-thermal.dtsi @@ -17,4 +17,25 @@ cpu_thermal: cpu_thermal { /* sensor ID */ thermal-sensors = <&bandgap 0>; + + cpu_trips: trips { + cpu_alert0: cpu_alert { + temperature = <80000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + cpu_crit: cpu_crit { + temperature = <90000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + + cpu_cooling_maps: cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = + <&cpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi index ac3d996cec5c..2c19d6e255bd 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi +++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi @@ -337,7 +337,7 @@ }; &dss { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dss_dpi_pins>; @@ -361,7 +361,7 @@ }; &venc { - status = "ok"; + status = "okay"; vdda-supply = <&vdac>; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index ecc45862b4f3..c8745bc800f7 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -822,27 +822,27 @@ }; &mcbsp1 { /* FM Transceiver PCM */ - status = "ok"; + status = "okay"; #sound-dai-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&mcbsp1_pins>; }; &mcbsp2 { /* TPS65950 I2S */ - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mcbsp2_pins>; }; &mcbsp3 { /* Bluetooth PCM */ - status = "ok"; + status = "okay"; #sound-dai-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&mcbsp3_pins>; }; &mcbsp4 { /* GSM voice PCM */ - status = "ok"; + status = "okay"; #sound-dai-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&mcbsp4_pins>; diff --git a/arch/arm/boot/dts/omap3-ha-lcd.dts b/arch/arm/boot/dts/omap3-ha-lcd.dts index b3f7f9966c3c..643283f0c3db 100644 --- a/arch/arm/boot/dts/omap3-ha-lcd.dts +++ b/arch/arm/boot/dts/omap3-ha-lcd.dts @@ -100,7 +100,7 @@ }; &dss { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dss_dpi_pins>; diff --git a/arch/arm/boot/dts/omap3-igep0020-common.dtsi b/arch/arm/boot/dts/omap3-igep0020-common.dtsi index 91caa50b74c4..af8aa5f0feb7 100644 --- a/arch/arm/boot/dts/omap3-igep0020-common.dtsi +++ b/arch/arm/boot/dts/omap3-igep0020-common.dtsi @@ -245,7 +245,7 @@ }; &dss { - status = "ok"; + status = "okay"; port { dpi_out: endpoint { diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts index 2495a696cec6..d211bcc31174 100644 --- a/arch/arm/boot/dts/omap3-n9.dts +++ b/arch/arm/boot/dts/omap3-n9.dts @@ -23,7 +23,6 @@ vana-supply = <&vaux3>; clocks = <&isp 0>; clock-frequency = <9600000>; - nokia,nvm-size = <(16 * 64)>; flash-leds = <&as3645a_flash &as3645a_indicator>; port { smia_1_1: endpoint { diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index bc24e3dc7cda..32335d4ce478 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -1083,7 +1083,7 @@ }; &dss { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dss_sdi_pins>; @@ -1106,7 +1106,7 @@ }; &venc { - status = "ok"; + status = "okay"; vdda-supply = <&vdac>; @@ -1119,7 +1119,7 @@ }; &mcbsp2 { - status = "ok"; + status = "okay"; }; &ssi_port1 { diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts index 31d47a1fad84..b2f480022ff6 100644 --- a/arch/arm/boot/dts/omap3-n950.dts +++ b/arch/arm/boot/dts/omap3-n950.dts @@ -76,7 +76,6 @@ vana-supply = <&vaux3>; clocks = <&isp 0>; clock-frequency = <9600000>; - nokia,nvm-size = <(16 * 64)>; flash-leds = <&as3645a_flash &as3645a_indicator>; port { smia_1_1: endpoint { @@ -205,13 +204,13 @@ }; &dss { - status = "ok"; + status = "okay"; vdda_video-supply = <&vdac>; }; &dsi { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dsi_pins>; @@ -225,8 +224,9 @@ }; }; - lcd0: display { + lcd0: panel@0 { compatible = "nokia,himalaya", "panel-dsi-cm"; + reg = <0>; label = "lcd0"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi b/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi index c9e62e414abb..339a51fa4119 100644 --- a/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi @@ -48,7 +48,7 @@ }; &dss { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dss_dpi_pins>; diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi index 185ce53de0ec..1d6e88f99eb3 100644 --- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi @@ -76,7 +76,7 @@ }; &dss { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dss_dpi_pins>; diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi index 7fe0f9148232..7e30f9d45790 100644 --- a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi @@ -75,7 +75,7 @@ }; &dss { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dss_dpi_pins>; diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi index 150d5be42d27..37608af6c07f 100644 --- a/arch/arm/boot/dts/omap3-pandora-common.dtsi +++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi @@ -702,7 +702,7 @@ }; &venc { - status = "ok"; + status = "okay"; vdda-supply = <&vdac>; @@ -718,7 +718,7 @@ pinctrl-names = "default"; pinctrl-0 = < &dss_dpi_pins >; - status = "ok"; + status = "okay"; vdds_dsi-supply = <&vpll2>; port { diff --git a/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi b/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi index b8b9fcc41ef1..2dbb687d4df2 100644 --- a/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi +++ b/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi @@ -46,7 +46,7 @@ }; &dss { - status = "ok"; + status = "okay"; port { dpi_out: endpoint { remote-endpoint = <&lcd_in>; diff --git a/arch/arm/boot/dts/omap3-thunder.dts b/arch/arm/boot/dts/omap3-thunder.dts index f7930f198ce5..d82cab8e213a 100644 --- a/arch/arm/boot/dts/omap3-thunder.dts +++ b/arch/arm/boot/dts/omap3-thunder.dts @@ -64,7 +64,7 @@ }; &dss { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dss_dpi_pins>; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index cf22a7e1c63c..9dcae1f2bc99 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -941,6 +941,9 @@ ti,hwmods = "dss_dsi1"; clocks = <&dss1_alwon_fck>, <&dss2_alwon_fck>; clock-names = "fck", "sys_clk"; + + #address-cells = <1>; + #size-cells = <0>; }; rfbi: encoder@48050800 { diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi index 9c3ee4ac8165..feaa43b78535 100644 --- a/arch/arm/boot/dts/omap34xx.dtsi +++ b/arch/arm/boot/dts/omap34xx.dtsi @@ -20,6 +20,7 @@ operating-points-v2 = <&cpu0_opp_table>; clock-latency = <300000>; /* From legacy driver */ + #cooling-cells = <2>; }; }; @@ -182,7 +183,7 @@ }; &ssi { - status = "ok"; + status = "okay"; clocks = <&ssi_ssr_fck>, <&ssi_sst_fck>, diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi index 9c3beefc0fe0..05fe5ed127b0 100644 --- a/arch/arm/boot/dts/omap36xx.dtsi +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -25,6 +25,7 @@ vbb-supply = <&abb_mpu_iva>; clock-latency = <300000>; /* From omap-cpufreq driver */ + #cooling-cells = <2>; }; }; @@ -234,7 +235,7 @@ }; &ssi { - status = "ok"; + status = "okay"; clocks = <&ssi_ssr_fck>, <&ssi_sst_fck>, diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts index 4548d87534e3..b294c22177cb 100644 --- a/arch/arm/boot/dts/omap4-duovero-parlor.dts +++ b/arch/arm/boot/dts/omap4-duovero-parlor.dts @@ -171,11 +171,11 @@ }; &dss { - status = "ok"; + status = "okay"; }; &hdmi { - status = "ok"; + status = "okay"; vdda-supply = <&vdac>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 3e78caefa2b8..609a8dea946b 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -566,7 +566,7 @@ }; &dss { - status = "ok"; + status = "okay"; port { dpi_out: endpoint { @@ -577,12 +577,12 @@ }; &dsi2 { - status = "ok"; + status = "okay"; vdd-supply = <&vcxio>; }; &hdmi { - status = "ok"; + status = "okay"; vdda-supply = <&vdac>; port { diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 79e7a41ecb7e..afb49a2d6963 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -648,11 +648,11 @@ }; &dss { - status = "ok"; + status = "okay"; }; &dsi1 { - status = "ok"; + status = "okay"; vdd-supply = <&vcxio>; port { @@ -662,8 +662,9 @@ }; }; - lcd0: display { + lcd0: panel@0 { compatible = "tpo,taal", "panel-dsi-cm"; + reg = <0>; label = "lcd0"; reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */ @@ -677,7 +678,7 @@ }; &dsi2 { - status = "ok"; + status = "okay"; vdd-supply = <&vcxio>; port { @@ -687,8 +688,9 @@ }; }; - lcd1: display { + lcd1: panel@0 { compatible = "tpo,taal", "panel-dsi-cm"; + reg = <0>; label = "lcd1"; reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */ @@ -702,7 +704,7 @@ }; &hdmi { - status = "ok"; + status = "okay"; vdda-supply = <&vdac>; port { diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index eb5780eb2630..d6475cc6a91a 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -410,7 +410,7 @@ status = "disabled"; }; - target-module@56000000 { + sgx_module: target-module@56000000 { compatible = "ti,sysc-omap4", "ti,sysc"; reg = <0x5600fe00 0x4>, <0x5600fe10 0x4>; @@ -572,6 +572,9 @@ clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; clock-names = "fck", "sys_clk"; + + #address-cells = <1>; + #size-cells = <0>; }; }; @@ -604,6 +607,9 @@ clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; clock-names = "fck", "sys_clk"; + + #address-cells = <1>; + #size-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi index 8ed510ab00c5..cb309743de5d 100644 --- a/arch/arm/boot/dts/omap443x.dtsi +++ b/arch/arm/boot/dts/omap443x.dtsi @@ -74,3 +74,13 @@ }; /include/ "omap443x-clocks.dtsi" + +/* + * Use dpll_per for sgx at 153.6MHz like droid4 stock v3.0.8 Android kernel + */ +&sgx_module { + assigned-clocks = <&l3_gfx_clkctrl OMAP4_GPU_CLKCTRL 24>, + <&dpll_per_m7x2_ck>; + assigned-clock-rates = <0>, <153600000>; + assigned-clock-parents = <&dpll_per_m7x2_ck>; +}; diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index edf1906016c8..d8f13626cfd1 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -743,11 +743,11 @@ }; &dss { - status = "ok"; + status = "okay"; }; &hdmi { - status = "ok"; + status = "okay"; /* vdda-supply populated in board specific dts file */ diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts index e78d3718f145..ca759b7b8a58 100644 --- a/arch/arm/boot/dts/omap5-cm-t54.dts +++ b/arch/arm/boot/dts/omap5-cm-t54.dts @@ -653,7 +653,7 @@ }; &dss { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dss_dpi_pins>; @@ -677,12 +677,12 @@ }; &dsi2 { - status = "ok"; + status = "okay"; vdd-supply = <&ldo4_reg>; }; &hdmi { - status = "ok"; + status = "okay"; vdda-supply = <&ldo4_reg>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/owl-s500-labrador-base-m.dts b/arch/arm/boot/dts/owl-s500-labrador-base-m.dts new file mode 100644 index 000000000000..c92f8bdcb331 --- /dev/null +++ b/arch/arm/boot/dts/owl-s500-labrador-base-m.dts @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Caninos Labrador Base Board + * + * Copyright (c) 2019-2020 Matheus Castello + */ + +/dts-v1/; + +#include "owl-s500-labrador-v2.dtsi" + +/ { + model = "Caninos Labrador Core v2 on Labrador Base-M v1"; + compatible = "caninos,labrador-base-m", + "caninos,labrador-v2", "actions,s500"; + + aliases { + serial3 = &uart3; + }; + + chosen { + stdout-path = "serial3:115200n8"; + }; + + uart3_clk: uart3-clk { + compatible = "fixed-clock"; + clock-frequency = <921600>; + #clock-cells = <0>; + }; +}; + +&uart3 { + status = "okay"; + clocks = <&uart3_clk>; +}; diff --git a/arch/arm/boot/dts/owl-s500-labrador-v2.dtsi b/arch/arm/boot/dts/owl-s500-labrador-v2.dtsi new file mode 100644 index 000000000000..883ff2f9886d --- /dev/null +++ b/arch/arm/boot/dts/owl-s500-labrador-v2.dtsi @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Caninos Labrador SoM V2 + * + * Copyright (c) 2019-2020 Matheus Castello + */ + +#include "owl-s500.dtsi" + +/ { + model = "Caninos Labrador Core V2.1"; + compatible = "caninos,labrador-v2", "actions,s500"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x80000000>; + }; +}; + +&timer { + clocks = <&hosc>; +}; diff --git a/arch/arm/boot/dts/owl-s500-roseapplepi.dts b/arch/arm/boot/dts/owl-s500-roseapplepi.dts new file mode 100644 index 000000000000..a2087e617cb2 --- /dev/null +++ b/arch/arm/boot/dts/owl-s500-roseapplepi.dts @@ -0,0 +1,47 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Roseapple Pi + * + * Copyright (C) 2020 Cristian Ciocaltea <cristian.ciocaltea@gmail.com> + */ + +/dts-v1/; + +#include "owl-s500.dtsi" + +/ { + compatible = "roseapplepi,roseapplepi", "actions,s500"; + model = "Roseapple Pi"; + + aliases { + serial2 = &uart2; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x80000000>; /* 2GB */ + }; + + uart2_clk: uart2-clk { + compatible = "fixed-clock"; + clock-frequency = <921600>; + #clock-cells = <0>; + }; +}; + +&twd_timer { + status = "okay"; +}; + +&timer { + clocks = <&hosc>; +}; + +&uart2 { + status = "okay"; + clocks = <&uart2_clk>; +}; diff --git a/arch/arm/boot/dts/owl-s500.dtsi b/arch/arm/boot/dts/owl-s500.dtsi index 5ceb6cc4451d..1dbe4e8b38ac 100644 --- a/arch/arm/boot/dts/owl-s500.dtsi +++ b/arch/arm/boot/dts/owl-s500.dtsi @@ -84,21 +84,21 @@ global_timer: timer@b0020200 { compatible = "arm,cortex-a9-global-timer"; reg = <0xb0020200 0x100>; - interrupts = <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; + interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; status = "disabled"; }; twd_timer: timer@b0020600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0xb0020600 0x20>; - interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; status = "disabled"; }; twd_wdt: wdt@b0020620 { compatible = "arm,cortex-a9-twd-wdt"; reg = <0xb0020620 0xe0>; - interrupts = <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; + interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/picoxcell-pc3x2.dtsi b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi index 5ae860788339..c4c6c7e9e37b 100644 --- a/arch/arm/boot/dts/picoxcell-pc3x2.dtsi +++ b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi @@ -160,7 +160,6 @@ reg = <0x20000 0x1000>; #address-cells = <1>; #size-cells = <0>; - reg-io-width = <4>; banka: gpio-controller@0 { compatible = "snps,dw-apb-gpio-bank"; diff --git a/arch/arm/boot/dts/picoxcell-pc3x3.dtsi b/arch/arm/boot/dts/picoxcell-pc3x3.dtsi index fa93155fadb7..0e85bb6bd150 100644 --- a/arch/arm/boot/dts/picoxcell-pc3x3.dtsi +++ b/arch/arm/boot/dts/picoxcell-pc3x3.dtsi @@ -243,7 +243,6 @@ reg = <0x20000 0x1000>; #address-cells = <1>; #size-cells = <0>; - reg-io-width = <4>; banka: gpio-controller@0 { compatible = "snps,dw-apb-gpio-bank"; diff --git a/arch/arm/boot/dts/pm9g45.dts b/arch/arm/boot/dts/pm9g45.dts index 4dfe0f15d7bd..c349fd3758a6 100644 --- a/arch/arm/boot/dts/pm9g45.dts +++ b/arch/arm/boot/dts/pm9g45.dts @@ -15,7 +15,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@70000000 { reg = <0x70000000 0x8000000>; }; @@ -68,6 +68,7 @@ &pinctrl_board_mmc &pinctrl_mmc0_slot0_clk_cmd_dat0 &pinctrl_mmc0_slot0_dat1_3>; + pinctrl-names = "default"; status = "okay"; slot@0 { reg = <0>; diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi index 9c7b46b90c3c..7d3d93c22ed9 100644 --- a/arch/arm/boot/dts/prima2.dtsi +++ b/arch/arm/boot/dts/prima2.dtsi @@ -50,7 +50,7 @@ #size-cells = <1>; ranges = <0x40000000 0x40000000 0x80000000>; - l2-cache-controller@80040000 { + cache-controller@80040000 { compatible = "arm,pl310-cache"; reg = <0x80040000 0x1000>; interrupts = <59>; diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi index 347b4f7d7889..dda2ceec6591 100644 --- a/arch/arm/boot/dts/qcom-mdm9615.dtsi +++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi @@ -98,7 +98,7 @@ ranges; compatible = "simple-bus"; - L2: l2-cache@2040000 { + L2: cache-controller@2040000 { compatible = "arm,pl310-cache"; reg = <0x02040000 0x1000>; arm,data-latency = <2 2 0>; diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi index b9b138888048..45cf75b5824c 100644 --- a/arch/arm/boot/dts/r7s72100.dtsi +++ b/arch/arm/boot/dts/r7s72100.dtsi @@ -499,7 +499,7 @@ clock-output-names = "sdhi00", "sdhi01", "sdhi10", "sdhi11"; }; - pinctrl: pin-controller@fcfe3000 { + pinctrl: pinctrl@fcfe3000 { compatible = "renesas,r7s72100-ports"; reg = <0xfcfe3000 0x4230>; diff --git a/arch/arm/boot/dts/r7s9210.dtsi b/arch/arm/boot/dts/r7s9210.dtsi index 838920aef992..85c0399b1339 100644 --- a/arch/arm/boot/dts/r7s9210.dtsi +++ b/arch/arm/boot/dts/r7s9210.dtsi @@ -489,7 +489,7 @@ interrupt-map-mask = <7 0>; }; - pinctrl: pin-controller@fcffe000 { + pinctrl: pinctrl@fcffe000 { compatible = "renesas,r7s9210-pinctrl"; reg = <0xfcffe000 0x1000>; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index b92e72579836..e5fb1ce261f7 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -221,7 +221,7 @@ power-domains = <&pd_c4>; }; - pfc: pin-controller@e6050000 { + pfc: pinctrl@e6050000 { compatible = "renesas,pfc-r8a73a4"; reg = <0 0xe6050000 0 0x9000>; gpio-controller; diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 8048303037ee..1b2cf5fa322b 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -311,7 +311,7 @@ status = "disabled"; }; - pfc: pin-controller@e6050000 { + pfc: pinctrl@e6050000 { compatible = "renesas,pfc-r8a7740"; reg = <0xe6050000 0x8000>, <0xe605800c 0x20>; diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts index 1479ced50873..961c0f2eeefb 100644 --- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts @@ -27,6 +27,12 @@ status = "disabled"; }; +&can0 { + pinctrl-0 = <&can0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + ðer { pinctrl-0 = <ðer_pins>; pinctrl-names = "default"; @@ -49,6 +55,11 @@ }; &pfc { + can0_pins: can0 { + groups = "can0_data_d"; + function = "can0"; + }; + ether_pins: ether { groups = "eth_mdio", "eth_rmii"; function = "eth"; diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts index e90aaf1c94f0..c2c05c9685d1 100644 --- a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts @@ -52,6 +52,16 @@ clock-frequency = <26000000>; }; + leds { + compatible = "gpio-leds"; + + sdhi2_led { + label = "sdio-led"; + gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + }; + }; + reg_1p5v: 1p5v { compatible = "regulator-fixed"; regulator-name = "1P5V"; @@ -131,17 +141,109 @@ }; }; +&can1 { + pinctrl-0 = <&can1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&cmt0 { + status = "okay"; +}; + +&gpio1 { + can-trx-en-gpio{ + gpio-hog; + gpios = <28 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "can-trx-en-gpio"; + }; +}; + +&hsusb { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&msiof0 { + pinctrl-0 = <&msiof0_pins>; + pinctrl-names = "default"; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + + status = "okay"; + + flash1: flash@0 { + compatible = "sst,sst25vf016b", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "user"; + reg = <0x00000000 0x00200000>; + }; + }; + }; +}; + +&pci0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + /* Disable hsusb to enable USB2.0 host mode support on J2 */ + /* status = "okay"; */ +}; + +&pci1 { + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&pci2 { + /* Disable xhci to enable USB2.0 host mode support on J23 bottom port */ + /* status = "okay"; */ +}; + +&pcie_bus_clk { + clock-frequency = <100000000>; +}; + +&pciec { + /* SW2[6] determines which connector is activated + * ON = PCIe X4 (connector-J7) + * OFF = mini-PCIe (connector-J26) + */ + status = "okay"; +}; + &pfc { avb_pins: avb { groups = "avb_mdio", "avb_gmii"; function = "avb"; }; + can1_pins: can1 { + groups = "can1_data_b"; + function = "can1"; + }; + i2c2_pins: i2c2 { groups = "i2c2_b"; function = "i2c2"; }; + msiof0_pins: msiof0 { + groups = "msiof0_clk", "msiof0_sync", "msiof0_tx", "msiof0_rx"; + function = "msiof0"; + }; + scifa2_pins: scifa2 { groups = "scifa2_data_c"; function = "scifa2"; @@ -168,6 +270,16 @@ groups = "ssi34_ctrl", "ssi3_data", "ssi4_data"; function = "ssi"; }; + + usb0_pins: usb0 { + groups = "usb0"; + function = "usb0"; + }; + + usb1_pins: usb1 { + groups = "usb1_pwen"; + function = "usb1"; + }; }; &rcar_sound { @@ -222,3 +334,11 @@ &ssi4 { shared-pin; }; + +&usbphy { + status = "okay"; +}; + +&xhci { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a7742-iwg21m.dtsi b/arch/arm/boot/dts/r8a7742-iwg21m.dtsi index 85aff429d408..5621c9ed698f 100644 --- a/arch/arm/boot/dts/r8a7742-iwg21m.dtsi +++ b/arch/arm/boot/dts/r8a7742-iwg21m.dtsi @@ -35,10 +35,28 @@ clock-frequency = <20000000>; }; -&pfc { - mmc1_pins: mmc1 { - groups = "mmc1_data4", "mmc1_ctrl"; - function = "mmc1"; +&gpio0 { + /* GP0_18 set low to select QSPI. Doing so will disable VIN2 */ + qspi_en { + gpio-hog; + gpios = <18 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "QSPI_EN"; + }; +}; + +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + rtc@68 { + compatible = "ti,bq32000"; + reg = <0x68>; + interrupt-parent = <&gpio1>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; }; }; @@ -51,3 +69,56 @@ non-removable; status = "okay"; }; + +&pfc { + i2c0_pins: i2c0 { + groups = "i2c0"; + function = "i2c0"; + }; + + mmc1_pins: mmc1 { + groups = "mmc1_data4", "mmc1_ctrl"; + function = "mmc1"; + }; + + qspi_pins: qspi { + groups = "qspi_ctrl", "qspi_data2"; + function = "qspi"; + }; +}; + +&qspi { + pinctrl-0 = <&qspi_pins>; + pinctrl-names = "default"; + + status = "okay"; + + flash: flash@0 { + compatible = "sst,sst25vf016b", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + m25p,fast-read; + spi-cpol; + spi-cpha; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bootloader"; + reg = <0x00000000 0x000c0000>; + read-only; + }; + partition@c0000 { + label = "env"; + reg = <0x000c0000 0x00002000>; + }; + partition@c2000 { + label = "user"; + reg = <0x000c2000 0x0013e000>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/r8a7742.dtsi b/arch/arm/boot/dts/r8a7742.dtsi index 0240d017c90d..6a78c813057b 100644 --- a/arch/arm/boot/dts/r8a7742.dtsi +++ b/arch/arm/boot/dts/r8a7742.dtsi @@ -36,6 +36,14 @@ clock-frequency = <0>; }; + /* External CAN clock */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -188,6 +196,13 @@ clock-frequency = <0>; }; + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + pmu-0 { compatible = "arm,cortex-a15-pmu"; interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, @@ -323,11 +338,22 @@ resets = <&cpg 907>; }; - pfc: pin-controller@e6060000 { + pfc: pinctrl@e6060000 { compatible = "renesas,pfc-r8a7742"; reg = <0 0xe6060000 0 0x250>; }; + tpu: pwm@e60f0000 { + compatible = "renesas,tpu-r8a7742", "renesas,tpu"; + reg = <0 0xe60f0000 0 0x148>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 304>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 304>; + #pwm-cells = <3>; + status = "disabled"; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a7742-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; @@ -731,6 +757,22 @@ status = "disabled"; }; + qspi: spi@e6b10000 { + compatible = "renesas,qspi-r8a7742", "renesas,qspi"; + reg = <0 0xe6b10000 0 0x2c>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 917>; + dmas = <&dmac0 0x17>, <&dmac0 0x18>, + <&dmac1 0x17>, <&dmac1 0x18>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 917>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + scifa0: serial@e6c40000 { compatible = "renesas,scifa-r8a7742", "renesas,rcar-gen2-scifa", "renesas,scifa"; @@ -965,6 +1007,146 @@ status = "disabled"; }; + can0: can@e6e80000 { + compatible = "renesas,can-r8a7742", + "renesas,rcar-gen2-can"; + reg = <0 0xe6e80000 0 0x1000>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 916>, + <&cpg CPG_CORE R8A7742_CLK_RCAN>, <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 916>; + status = "disabled"; + }; + + can1: can@e6e88000 { + compatible = "renesas,can-r8a7742", + "renesas,rcar-gen2-can"; + reg = <0 0xe6e88000 0 0x1000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 915>, + <&cpg CPG_CORE R8A7742_CLK_RCAN>, <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 915>; + status = "disabled"; + }; + + pwm0: pwm@e6e30000 { + compatible = "renesas,pwm-r8a7742", "renesas,pwm-rcar"; + reg = <0 0xe6e30000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm1: pwm@e6e31000 { + compatible = "renesas,pwm-r8a7742", "renesas,pwm-rcar"; + reg = <0 0xe6e31000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm@e6e32000 { + compatible = "renesas,pwm-r8a7742", "renesas,pwm-rcar"; + reg = <0 0xe6e32000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm@e6e33000 { + compatible = "renesas,pwm-r8a7742", "renesas,pwm-rcar"; + reg = <0 0xe6e33000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm@e6e34000 { + compatible = "renesas,pwm-r8a7742", "renesas,pwm-rcar"; + reg = <0 0xe6e34000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm5: pwm@e6e35000 { + compatible = "renesas,pwm-r8a7742", "renesas,pwm-rcar"; + reg = <0 0xe6e35000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm6: pwm@e6e36000 { + compatible = "renesas,pwm-r8a7742", "renesas,pwm-rcar"; + reg = <0 0xe6e36000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + vin0: video@e6ef0000 { + compatible = "renesas,vin-r8a7742", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 811>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 811>; + status = "disabled"; + }; + + vin1: video@e6ef1000 { + compatible = "renesas,vin-r8a7742", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 810>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 810>; + status = "disabled"; + }; + + vin2: video@e6ef2000 { + compatible = "renesas,vin-r8a7742", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef2000 0 0x1000>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 809>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 809>; + status = "disabled"; + }; + + vin3: video@e6ef3000 { + compatible = "renesas,vin-r8a7742", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef3000 0 0x1000>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 808>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 808>; + status = "disabled"; + }; + rcar_sound: sound@ec500000 { /* * #sound-dai-cells is required @@ -1476,6 +1658,159 @@ resets = <&cpg 408>; }; + pciec: pcie@fe000000 { + compatible = "renesas,pcie-r8a7742", + "renesas,pcie-rcar-gen2"; + reg = <0 0xfe000000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>, + <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>, + <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>, + <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>, + <0x43000000 1 0x80000000 1 0x80000000 0 0x80000000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 319>; + status = "disabled"; + }; + + vsp@fe920000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe920000 0 0x8000>; + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 130>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 130>; + }; + + vsp@fe928000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe928000 0 0x8000>; + interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 131>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 131>; + }; + + vsp@fe930000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe930000 0 0x8000>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 128>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 128>; + }; + + vsp@fe938000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe938000 0 0x8000>; + interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 127>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 127>; + }; + + du: display@feb00000 { + compatible = "renesas,du-r8a7742"; + reg = <0 0xfeb00000 0 0x70000>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>; + clock-names = "du.0", "du.1", "du.2"; + resets = <&cpg 724>; + reset-names = "du.0"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb: endpoint { + }; + }; + port@1 { + reg = <1>; + du_out_lvds0: endpoint { + remote-endpoint = <&lvds0_in>; + }; + }; + port@2 { + reg = <2>; + du_out_lvds1: endpoint { + remote-endpoint = <&lvds1_in>; + }; + }; + }; + }; + + lvds0: lvds@feb90000 { + compatible = "renesas,r8a7742-lvds"; + reg = <0 0xfeb90000 0 0x14>; + clocks = <&cpg CPG_MOD 726>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 726>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + port@1 { + reg = <1>; + lvds0_out: endpoint { + }; + }; + }; + }; + + lvds1: lvds@feb94000 { + compatible = "renesas,r8a7742-lvds"; + reg = <0 0xfeb94000 0 0x14>; + clocks = <&cpg CPG_MOD 725>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 725>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds1_in: endpoint { + remote-endpoint = <&du_out_lvds1>; + }; + }; + port@1 { + reg = <1>; + lvds1_out: endpoint { + }; + }; + }; + }; + prr: chipid@ff000044 { compatible = "renesas,prr"; reg = <0 0xff000044 0 4>; diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi index 896916a00b84..f444e418f408 100644 --- a/arch/arm/boot/dts/r8a7743.dtsi +++ b/arch/arm/boot/dts/r8a7743.dtsi @@ -265,7 +265,7 @@ resets = <&cpg 904>; }; - pfc: pin-controller@e6060000 { + pfc: pinctrl@e6060000 { compatible = "renesas,pfc-r8a7743"; reg = <0 0xe6060000 0 0x250>; }; diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi index 6b56aa286337..0442aad4f9db 100644 --- a/arch/arm/boot/dts/r8a7744.dtsi +++ b/arch/arm/boot/dts/r8a7744.dtsi @@ -265,7 +265,7 @@ resets = <&cpg 904>; }; - pfc: pin-controller@e6060000 { + pfc: pinctrl@e6060000 { compatible = "renesas,pfc-r8a7744"; reg = <0 0xe6060000 0 0x250>; }; diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts index b15b1b088a32..1c7b37a01f0a 100644 --- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts +++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts @@ -53,42 +53,6 @@ clock-frequency = <26000000>; }; - rsnd_sgtl5000: sound { - compatible = "simple-audio-card"; - simple-audio-card,format = "i2s"; - simple-audio-card,bitclock-master = <&sndcodec>; - simple-audio-card,frame-master = <&sndcodec>; - - sndcpu: simple-audio-card,cpu { - sound-dai = <&rcar_sound>; - }; - - sndcodec: simple-audio-card,codec { - sound-dai = <&sgtl5000>; - }; - }; - - vccq_sdhi0: regulator-vccq-sdhi0 { - compatible = "regulator-gpio"; - - regulator-name = "SDHI0 VccQ"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; - gpios-states = <1>; - states = <3300000 1>, <1800000 0>; - }; - - vccq_panel: regulator-vccq-panel { - compatible = "regulator-fixed"; - regulator-name = "Panel VccQ"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio1 13 GPIO_ACTIVE_LOW>; - enable-active-high; - }; - backlight_lcd: backlight { compatible = "pwm-backlight"; pwms = <&tpu 3 5000000 PWM_POLARITY_INVERTED>; @@ -107,19 +71,40 @@ }; }; }; -}; -&du { - pinctrl-0 = <&du0_pins>; - pinctrl-names = "default"; + vccq_panel: regulator-vccq-panel { + compatible = "regulator-fixed"; + regulator-name = "Panel VccQ"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 13 GPIO_ACTIVE_LOW>; + enable-active-high; + }; - status = "okay"; + vccq_sdhi0: regulator-vccq-sdhi0 { + compatible = "regulator-gpio"; - ports { - port@0 { - endpoint { - remote-endpoint = <&lcd_in>; - }; + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; + gpios-states = <1>; + states = <3300000 1>, <1800000 0>; + }; + + rsnd_sgtl5000: sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sndcodec>; + simple-audio-card,frame-master = <&sndcodec>; + + sndcpu: simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; + + sndcodec: simple-audio-card,codec { + sound-dai = <&sgtl5000>; }; }; }; @@ -150,6 +135,21 @@ status = "okay"; }; +&du { + pinctrl-0 = <&du0_pins>; + pinctrl-names = "default"; + + status = "okay"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&lcd_in>; + }; + }; + }; +}; + &hscif1 { pinctrl-0 = <&hscif1_pins>; pinctrl-names = "default"; @@ -171,6 +171,15 @@ status = "okay"; clock-frequency = <400000>; + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + #sound-dai-cells = <0>; + reg = <0x0a>; + clocks = <&audio_clock>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + }; + stmpe811@44 { compatible = "st,stmpe811"; reg = <0x44>; @@ -179,7 +188,7 @@ /* 3.25 MHz ADC clock speed */ st,adc-freq = <1>; - /* ADC converstion time: 80 clocks */ + /* ADC conversion time: 80 clocks */ st,sample-time = <4>; /* 12-bit ADC */ st,mod-12b = <1>; @@ -203,15 +212,6 @@ st,touch-det-delay = <5>; }; }; - - sgtl5000: codec@a { - compatible = "fsl,sgtl5000"; - #sound-dai-cells = <0>; - reg = <0x0a>; - clocks = <&audio_clock>; - VDDA-supply = <®_3p3v>; - VDDIO-supply = <®_3p3v>; - }; }; &pci1 { diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi index 636248f370e0..0f14ac22921d 100644 --- a/arch/arm/boot/dts/r8a7745.dtsi +++ b/arch/arm/boot/dts/r8a7745.dtsi @@ -230,7 +230,7 @@ resets = <&cpg 905>; }; - pfc: pin-controller@e6060000 { + pfc: pinctrl@e6060000 { compatible = "renesas,pfc-r8a7745"; reg = <0 0xe6060000 0 0x11c>; }; diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi index 6baa126b6590..691b1a131c87 100644 --- a/arch/arm/boot/dts/r8a77470.dtsi +++ b/arch/arm/boot/dts/r8a77470.dtsi @@ -187,7 +187,7 @@ resets = <&cpg 907>; }; - pfc: pin-controller@e6060000 { + pfc: pinctrl@e6060000 { compatible = "renesas,pfc-r8a77470"; reg = <0 0xe6060000 0 0x118>; }; diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index 1612b003fb55..c9f8735860bf 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -142,7 +142,7 @@ interrupt-controller; }; - pfc: pin-controller@fffc0000 { + pfc: pinctrl@fffc0000 { compatible = "renesas,pfc-r8a7778"; reg = <0xfffc0000 0x118>; }; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index c5634daef96f..74d7e9084eab 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -321,7 +321,7 @@ status = "disabled"; }; - pfc: pin-controller@fffc0000 { + pfc: pinctrl@fffc0000 { compatible = "renesas,pfc-r8a7779"; reg = <0xfffc0000 0x23c>; }; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 769ba2a33d39..b0569b4ea5c8 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -363,7 +363,7 @@ resets = <&cpg 907>; }; - pfc: pin-controller@e6060000 { + pfc: pinctrl@e6060000 { compatible = "renesas,pfc-r8a7790"; reg = <0 0xe6060000 0 0x250>; }; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 499cf388735f..87f0d6dc3e5a 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -286,7 +286,7 @@ resets = <&cpg 904>; }; - pfc: pin-controller@e6060000 { + pfc: pinctrl@e6060000 { compatible = "renesas,pfc-r8a7791"; reg = <0 0xe6060000 0 0x250>; }; diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi index 597848ad4dfa..f5b299bfcb23 100644 --- a/arch/arm/boot/dts/r8a7792.dtsi +++ b/arch/arm/boot/dts/r8a7792.dtsi @@ -296,7 +296,7 @@ resets = <&cpg 913>; }; - pfc: pin-controller@e6060000 { + pfc: pinctrl@e6060000 { compatible = "renesas,pfc-r8a7792"; reg = <0 0xe6060000 0 0x144>; }; diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index 6d507091b163..f930f69f7bcc 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -271,7 +271,7 @@ resets = <&cpg 904>; }; - pfc: pin-controller@e6060000 { + pfc: pinctrl@e6060000 { compatible = "renesas,pfc-r8a7793"; reg = <0 0xe6060000 0 0x250>; }; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 5f340397ab64..cd5e2904068a 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -238,7 +238,7 @@ resets = <&cpg 905>; }; - pfc: pin-controller@e6060000 { + pfc: pinctrl@e6060000 { compatible = "renesas,pfc-r8a7794"; reg = <0 0xe6060000 0 0x11c>; }; diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/r9a06g032.dtsi index ee59cc84f212..c47896e4ab58 100644 --- a/arch/arm/boot/dts/r9a06g032.dtsi +++ b/arch/arm/boot/dts/r9a06g032.dtsi @@ -165,7 +165,7 @@ status = "disabled"; }; - pinctrl: pin-controller@40067000 { + pinctrl: pinctrl@40067000 { compatible = "renesas,r9a06g032-pinctrl", "renesas,rzn1-pinctrl"; reg = <0x40067000 0x1000>, <0x51000000 0x480>; clocks = <&sysctrl R9A06G032_HCLK_PINCONFIG>; diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts index 0a56a2f1bc4d..eba7a1344976 100644 --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts @@ -63,7 +63,11 @@ }; &cpu0 { - cpu0-supply = <&vdd_arm>; + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; }; &i2c1 { diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts b/arch/arm/boot/dts/rk3066a-marsboard.dts index 7e01f6406a86..6b121658d93c 100644 --- a/arch/arm/boot/dts/rk3066a-marsboard.dts +++ b/arch/arm/boot/dts/rk3066a-marsboard.dts @@ -47,7 +47,11 @@ }; &cpu0 { - cpu0-supply = <&vdd_arm>; + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; }; &i2c1 { diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts index f9db6bb9fa11..309518403d86 100644 --- a/arch/arm/boot/dts/rk3066a-rayeager.dts +++ b/arch/arm/boot/dts/rk3066a-rayeager.dts @@ -128,7 +128,11 @@ }; &cpu0 { - cpu0-supply = <&vdd_arm>; + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; }; &emac { diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index b599394d149d..252750c97f97 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -36,7 +36,7 @@ clock-latency = <40000>; clocks = <&cru ARMCLK>; }; - cpu@1 { + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; next-level-cache = <&L2>; diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index 018802df4c0e..c4ca73b40d4a 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -247,7 +247,7 @@ pinctrl-0 = <&rgmii_pins>; tx_delay = <0x30>; rx_delay = <0x10>; - status = "ok"; + status = "okay"; }; &gpu { diff --git a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi index 61435d8ee37b..36efa36b7190 100644 --- a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi @@ -61,7 +61,7 @@ snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>; tx_delay = <0x30>; rx_delay = <0x10>; - status = "ok"; + status = "okay"; }; &i2c0 { diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi index e5c4fd4ea67e..7fb582302b32 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -191,7 +191,7 @@ snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>; tx_delay = <0x30>; rx_delay = <0x10>; - status = "ok"; + status = "okay"; }; &gpu { diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts index 213c9eb84f76..cf54d5ffff2f 100644 --- a/arch/arm/boot/dts/rk3288-miqi.dts +++ b/arch/arm/boot/dts/rk3288-miqi.dts @@ -81,7 +81,19 @@ }; &cpu0 { - cpu0-supply = <&vdd_cpu>; + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; }; &emmc { @@ -108,7 +120,7 @@ snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>; tx_delay = <0x30>; rx_delay = <0x10>; - status = "ok"; + status = "okay"; }; &hdmi { diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts index 6a51940398b5..8c7376d64bc4 100644 --- a/arch/arm/boot/dts/rk3288-popmetal.dts +++ b/arch/arm/boot/dts/rk3288-popmetal.dts @@ -103,7 +103,19 @@ }; &cpu0 { - cpu0-supply = <&vdd_cpu>; + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; }; &emmc { @@ -149,7 +161,7 @@ pinctrl-0 = <&rgmii_pins>; tx_delay = <0x30>; rx_delay = <0x10>; - status = "ok"; + status = "okay"; }; &hdmi { diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts index a258c7ae5329..55467bc30fa6 100644 --- a/arch/arm/boot/dts/rk3288-r89.dts +++ b/arch/arm/boot/dts/rk3288-r89.dts @@ -91,7 +91,19 @@ }; &cpu0 { - cpu0-supply = <&vdd_cpu>; + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; }; &gmac { @@ -107,7 +119,7 @@ pinctrl-0 = <&rgmii_pins>; tx_delay = <0x30>; rx_delay = <0x10>; - status = "ok"; + status = "okay"; }; &hdmi { diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts index 3cca4d0f9b09..c4d1d142d8c6 100644 --- a/arch/arm/boot/dts/rk3288-rock2-square.dts +++ b/arch/arm/boot/dts/rk3288-rock2-square.dts @@ -156,7 +156,7 @@ }; &gmac { - status = "ok"; + status = "okay"; }; &hdmi { diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi index 90e9be443fe6..9c1e38c54eae 100644 --- a/arch/arm/boot/dts/rk3288-tinker.dtsi +++ b/arch/arm/boot/dts/rk3288-tinker.dtsi @@ -137,7 +137,7 @@ snps,reset-delays-us = <0 10000 1000000>; tx_delay = <0x30>; rx_delay = <0x10>; - status = "ok"; + status = "okay"; }; &gpu { diff --git a/arch/arm/boot/dts/rk3288-vyasa.dts b/arch/arm/boot/dts/rk3288-vyasa.dts index 1a20854a1317..aa50f8ed4ca0 100644 --- a/arch/arm/boot/dts/rk3288-vyasa.dts +++ b/arch/arm/boot/dts/rk3288-vyasa.dts @@ -125,7 +125,19 @@ }; &cpu0 { - cpu0-supply = <&vdd_cpu>; + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; }; &emmc { diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts index 811bfdef4e9b..47626ede6fdd 100644 --- a/arch/arm/boot/dts/s3c2416-smdk2416.dts +++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts @@ -17,18 +17,11 @@ reg = <0x30000000 0x4000000>; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - xti: xti@0 { - compatible = "fixed-clock"; - reg = <0>; - clock-frequency = <12000000>; - clock-output-names = "xti"; - #clock-cells = <0>; - }; + xti: clock-0 { + compatible = "fixed-clock"; + clock-frequency = <12000000>; + clock-output-names = "xti"; + #clock-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi index 6adf64ea3ff2..4f084f4fe44f 100644 --- a/arch/arm/boot/dts/s3c2416.dtsi +++ b/arch/arm/boot/dts/s3c2416.dtsi @@ -18,54 +18,22 @@ }; cpus { - cpu { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; compatible = "arm,arm926ej-s"; + reg = <0x0>; }; }; - interrupt-controller@4a000000 { - compatible = "samsung,s3c2416-irq"; - }; - clocks: clock-controller@4c000000 { compatible = "samsung,s3c2416-clock"; reg = <0x4c000000 0x40>; #clock-cells = <1>; }; - pinctrl@56000000 { - compatible = "samsung,s3c2416-pinctrl"; - }; - - timer@51000000 { - clocks = <&clocks PCLK_PWM>; - clock-names = "timers"; - }; - - uart_0: serial@50000000 { - compatible = "samsung,s3c2440-uart"; - clock-names = "uart", "clk_uart_baud2", - "clk_uart_baud3"; - clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>, - <&clocks SCLK_UART>; - }; - - uart_1: serial@50004000 { - compatible = "samsung,s3c2440-uart"; - clock-names = "uart", "clk_uart_baud2", - "clk_uart_baud3"; - clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>, - <&clocks SCLK_UART>; - }; - - uart_2: serial@50008000 { - compatible = "samsung,s3c2440-uart"; - clock-names = "uart", "clk_uart_baud2", - "clk_uart_baud3"; - clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>, - <&clocks SCLK_UART>; - }; - uart_3: serial@5000c000 { compatible = "samsung,s3c2440-uart"; reg = <0x5000C000 0x4000>; @@ -98,22 +66,59 @@ <&clocks MUX_HSMMC1>; status = "disabled"; }; +}; - watchdog: watchdog@53000000 { - interrupts = <1 9 27 3>; - clocks = <&clocks PCLK_WDT>; - clock-names = "watchdog"; - }; +&i2c { + compatible = "samsung,s3c2440-i2c"; + clocks = <&clocks PCLK_I2C0>; + clock-names = "i2c"; +}; - rtc: rtc@57000000 { - compatible = "samsung,s3c2416-rtc"; - clocks = <&clocks PCLK_RTC>; - clock-names = "rtc"; - }; +&intc { + compatible = "samsung,s3c2416-irq"; +}; - i2c@54000000 { - compatible = "samsung,s3c2440-i2c"; - clocks = <&clocks PCLK_I2C0>; - clock-names = "i2c"; - }; +&pinctrl_0 { + compatible = "samsung,s3c2416-pinctrl"; +}; + +&rtc { + compatible = "samsung,s3c2416-rtc"; + clocks = <&clocks PCLK_RTC>; + clock-names = "rtc"; +}; + +&timer { + clocks = <&clocks PCLK_PWM>; + clock-names = "timers"; +}; + +&uart_0 { + compatible = "samsung,s3c2440-uart"; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>, + <&clocks SCLK_UART>; +}; + +&uart_1 { + compatible = "samsung,s3c2440-uart"; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>, + <&clocks SCLK_UART>; +}; + +&uart_2 { + compatible = "samsung,s3c2440-uart"; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>, + <&clocks SCLK_UART>; +}; + +&watchdog { + interrupts = <1 9 27 3>; + clocks = <&clocks PCLK_WDT>; + clock-names = "watchdog"; }; diff --git a/arch/arm/boot/dts/s3c24xx.dtsi b/arch/arm/boot/dts/s3c24xx.dtsi index 6d8dd3cdd3c0..06f82c7e458e 100644 --- a/arch/arm/boot/dts/s3c24xx.dtsi +++ b/arch/arm/boot/dts/s3c24xx.dtsi @@ -13,12 +13,12 @@ aliases { pinctrl0 = &pinctrl_0; - serial0 = &uart0; - serial1 = &uart1; - serial2 = &uart2; + serial0 = &uart_0; + serial1 = &uart_1; + serial2 = &uart_2; }; - intc:interrupt-controller@4a000000 { + intc: interrupt-controller@4a000000 { compatible = "samsung,s3c2410-irq"; reg = <0x4a000000 0x100>; interrupt-controller; @@ -39,49 +39,49 @@ }; }; - timer@51000000 { + timer: pwm@51000000 { compatible = "samsung,s3c2410-pwm"; reg = <0x51000000 0x1000>; interrupts = <0 0 10 3>, <0 0 11 3>, <0 0 12 3>, <0 0 13 3>, <0 0 14 3>; - #pwm-cells = <4>; + #pwm-cells = <3>; }; - uart0: serial@50000000 { + uart_0: serial@50000000 { compatible = "samsung,s3c2410-uart"; reg = <0x50000000 0x4000>; interrupts = <1 28 0 4>, <1 28 1 4>; status = "disabled"; }; - uart1: serial@50004000 { + uart_1: serial@50004000 { compatible = "samsung,s3c2410-uart"; reg = <0x50004000 0x4000>; interrupts = <1 23 3 4>, <1 23 4 4>; status = "disabled"; }; - uart2: serial@50008000 { + uart_2: serial@50008000 { compatible = "samsung,s3c2410-uart"; reg = <0x50008000 0x4000>; interrupts = <1 15 6 4>, <1 15 7 4>; status = "disabled"; }; - watchdog@53000000 { + watchdog: watchdog@53000000 { compatible = "samsung,s3c2410-wdt"; reg = <0x53000000 0x100>; interrupts = <0 0 9 3>; status = "disabled"; }; - rtc@57000000 { + rtc: rtc@57000000 { compatible = "samsung,s3c2410-rtc"; reg = <0x57000000 0x100>; interrupts = <0 0 30 3>, <0 0 8 3>; status = "disabled"; }; - i2c@54000000 { + i2c: i2c@54000000 { compatible = "samsung,s3c2410-i2c"; reg = <0x54000000 0x100>; interrupts = <0 0 27 3>; diff --git a/arch/arm/boot/dts/s3c6410-mini6410.dts b/arch/arm/boot/dts/s3c6410-mini6410.dts index 1aeac33b0d34..285555b9ed94 100644 --- a/arch/arm/boot/dts/s3c6410-mini6410.dts +++ b/arch/arm/boot/dts/s3c6410-mini6410.dts @@ -28,29 +28,21 @@ bootargs = "console=ttySAC0,115200n8 earlyprintk rootwait root=/dev/mmcblk0p1"; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - fin_pll: oscillator@0 { - compatible = "fixed-clock"; - reg = <0>; - clock-frequency = <12000000>; - clock-output-names = "fin_pll"; - #clock-cells = <0>; - }; + fin_pll: oscillator-0 { + compatible = "fixed-clock"; + clock-frequency = <12000000>; + clock-output-names = "fin_pll"; + #clock-cells = <0>; + }; - xusbxti: oscillator@1 { - compatible = "fixed-clock"; - reg = <1>; - clock-output-names = "xusbxti"; - clock-frequency = <48000000>; - #clock-cells = <0>; - }; + xusbxti: oscillator-1 { + compatible = "fixed-clock"; + clock-output-names = "xusbxti"; + clock-frequency = <48000000>; + #clock-cells = <0>; }; - srom-cs1@18000000 { + srom-cs1-bus@18000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/s3c6410-smdk6410.dts b/arch/arm/boot/dts/s3c6410-smdk6410.dts index 96267f5f02a8..69c9ec4cf381 100644 --- a/arch/arm/boot/dts/s3c6410-smdk6410.dts +++ b/arch/arm/boot/dts/s3c6410-smdk6410.dts @@ -28,29 +28,21 @@ bootargs = "console=ttySAC0,115200n8 earlyprintk rootwait root=/dev/mmcblk0p1"; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - fin_pll: oscillator@0 { - compatible = "fixed-clock"; - reg = <0>; - clock-frequency = <12000000>; - clock-output-names = "fin_pll"; - #clock-cells = <0>; - }; + fin_pll: oscillator-0 { + compatible = "fixed-clock"; + clock-frequency = <12000000>; + clock-output-names = "fin_pll"; + #clock-cells = <0>; + }; - xusbxti: oscillator@1 { - compatible = "fixed-clock"; - reg = <1>; - clock-output-names = "xusbxti"; - clock-frequency = <48000000>; - #clock-cells = <0>; - }; + xusbxti: oscillator-1 { + compatible = "fixed-clock"; + clock-output-names = "xusbxti"; + clock-frequency = <48000000>; + #clock-cells = <0>; }; - srom-cs1@18000000 { + srom-cs1-bus@18000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/s3c64xx.dtsi b/arch/arm/boot/dts/s3c64xx.dtsi index 2e611df37911..cb11a87dbc42 100644 --- a/arch/arm/boot/dts/s3c64xx.dtsi +++ b/arch/arm/boot/dts/s3c64xx.dtsi @@ -34,7 +34,7 @@ cpu@0 { device_type = "cpu"; - compatible = "arm,arm1176jzf-s", "arm,arm1176"; + compatible = "arm,arm1176jzf-s"; reg = <0x0>; }; }; diff --git a/arch/arm/boot/dts/s5pv210-aquila.dts b/arch/arm/boot/dts/s5pv210-aquila.dts index 14969b6529e8..8e57e5a1f0c5 100644 --- a/arch/arm/boot/dts/s5pv210-aquila.dts +++ b/arch/arm/boot/dts/s5pv210-aquila.dts @@ -11,6 +11,7 @@ */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include "s5pv210.dtsi" @@ -32,42 +33,40 @@ 0x40000000 0x18000000>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; + pmic_ap_clk: clock-0 { + /* Workaround for missing clock on PMIC */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; - vtf_reg: fixed-regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "V_TF_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - gpio = <&mp05 4 0>; - enable-active-high; - }; + vtf_reg: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "V_TF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&mp05 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - pda_reg: fixed-regulator@1 { - compatible = "regulator-fixed"; - regulator-name = "VCC_1.8V_PDA"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - reg = <1>; - }; + pda_reg: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1.8V_PDA"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; - bat_reg: fixed-regulator@2 { - compatible = "regulator-fixed"; - regulator-name = "V_BAT"; - regulator-min-microvolt = <3700000>; - regulator-max-microvolt = <3700000>; - reg = <2>; - }; + bat_reg: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "V_BAT"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; }; i2c_pmic: i2c-pmic { compatible = "i2c-gpio"; - gpios = <&gpj4 0 0>, /* sda */ - <&gpj4 3 0>; /* scl */ + sda-gpios = <&gpj4 0 GPIO_ACTIVE_HIGH>; + scl-gpios = <&gpj4 3 GPIO_ACTIVE_HIGH>; i2c-gpio,delay-us = <2>; /* ~100 kHz */ #address-cells = <1>; #size-cells = <0>; @@ -77,13 +76,13 @@ reg = <0x66>; max8998,pmic-buck1-default-dvs-idx = <0>; - max8998,pmic-buck1-dvs-gpios = <&gph0 3 0>, - <&gph0 4 0>; + max8998,pmic-buck1-dvs-gpios = <&gph0 3 GPIO_ACTIVE_HIGH>, + <&gph0 4 GPIO_ACTIVE_HIGH>; max8998,pmic-buck1-dvs-voltage = <1200000>, <1200000>, <1200000>, <1200000>; max8998,pmic-buck2-default-dvs-idx = <0>; - max8998,pmic-buck2-dvs-gpio = <&gph0 5 0>; + max8998,pmic-buck2-dvs-gpio = <&gph0 5 GPIO_ACTIVE_HIGH>; max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>; regulators { @@ -228,6 +227,11 @@ regulator-always-on; }; + ap32khz_reg: EN32KHz-AP { + regulator-name = "32KHz AP"; + regulator-always-on; + }; + vichg_reg: ENVICHG { regulator-name = "VICHG"; }; @@ -326,6 +330,11 @@ status = "okay"; }; +&rtc { + clocks = <&clocks CLK_RTC>, <&pmic_ap_clk>; + clock-names = "rtc", "rtc_src"; +}; + &sdhci0 { bus-width = <4>; non-removable; diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi index 822207f63ee0..bd4450dbdcb6 100644 --- a/arch/arm/boot/dts/s5pv210-aries.dtsi +++ b/arch/arm/boot/dts/s5pv210-aries.dtsi @@ -47,6 +47,18 @@ }; }; + pmic_ap_clk: clock-0 { + /* Workaround for missing clock on PMIC */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + bt_codec: bt_sco { + compatible = "linux,bt-sco"; + #sound-dai-cells = <0>; + }; + vibrator_pwr: regulator-fixed-0 { compatible = "regulator-fixed"; regulator-name = "vibrator-en"; @@ -54,7 +66,7 @@ gpio = <&gpj1 1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctr-0 = <&vibrator_ena>; + pinctrl-0 = <&vibrator_ena>; }; touchkey_vdd: regulator-fixed-1 { @@ -533,7 +545,7 @@ value = <0x5200>; }; - spi_lcd: spi-gpio-0 { + spi_lcd: spi-2 { compatible = "spi-gpio"; #address-cells = <1>; #size-cells = <0>; @@ -624,6 +636,11 @@ }; }; +&i2s0 { + dmas = <&pdma0 9>, <&pdma0 10>, <&pdma0 11>; + status = "okay"; +}; + &mfc { memory-region = <&mfc_left>, <&mfc_right>; }; @@ -815,6 +832,11 @@ samsung,pwm-outputs = <1>; }; +&rtc { + clocks = <&clocks CLK_RTC>, <&pmic_ap_clk>; + clock-names = "rtc", "rtc_src"; +}; + &sdhci1 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/s5pv210-fascinate4g.dts b/arch/arm/boot/dts/s5pv210-fascinate4g.dts index 65eed01cfced..ca064359dd30 100644 --- a/arch/arm/boot/dts/s5pv210-fascinate4g.dts +++ b/arch/arm/boot/dts/s5pv210-fascinate4g.dts @@ -35,6 +35,80 @@ linux,code = <KEY_VOLUMEUP>; }; }; + + headset_micbias_reg: regulator-fixed-3 { + compatible = "regulator-fixed"; + regulator-name = "Headset_Micbias"; + gpio = <&gpj2 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&headset_micbias_ena>; + }; + + main_micbias_reg: regulator-fixed-4 { + compatible = "regulator-fixed"; + regulator-name = "Main_Micbias"; + gpio = <&gpj4 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&main_micbias_ena>; + }; + + sound { + compatible = "samsung,fascinate4g-wm8994"; + + model = "Fascinate4G"; + + extcon = <&fsa9480>; + + main-micbias-supply = <&main_micbias_reg>; + headset-micbias-supply = <&headset_micbias_reg>; + + earpath-sel-gpios = <&gpj2 6 GPIO_ACTIVE_HIGH>; + + io-channels = <&adc 3>; + io-channel-names = "headset-detect"; + headset-detect-gpios = <&gph0 6 GPIO_ACTIVE_HIGH>; + headset-key-gpios = <&gph3 6 GPIO_ACTIVE_HIGH>; + + samsung,audio-routing = + "HP", "HPOUT1L", + "HP", "HPOUT1R", + + "SPK", "SPKOUTLN", + "SPK", "SPKOUTLP", + + "RCV", "HPOUT2N", + "RCV", "HPOUT2P", + + "LINE", "LINEOUT2N", + "LINE", "LINEOUT2P", + + "IN1LP", "Main Mic", + "IN1LN", "Main Mic", + + "IN1RP", "Headset Mic", + "IN1RN", "Headset Mic", + + "Modem Out", "Modem TX", + "Modem RX", "Modem In", + + "Bluetooth SPK", "TX", + "RX", "Bluetooth Mic"; + + pinctrl-names = "default"; + pinctrl-0 = <&headset_det &earpath_sel>; + + cpu { + sound-dai = <&i2s0>, <&bt_codec>; + }; + + codec { + sound-dai = <&wm8994>; + }; + }; }; &fg { @@ -51,6 +125,12 @@ pinctrl-names = "default"; pinctrl-0 = <&sleep_cfg>; + headset_det: headset-det { + samsung,pins = "gph0-6", "gph3-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_F>; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + }; + fg_irq: fg-irq { samsung,pins = "gph3-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_F>; @@ -58,6 +138,24 @@ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; + headset_micbias_ena: headset-micbias-ena { + samsung,pins = "gpj2-5"; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + earpath_sel: earpath-sel { + samsung,pins = "gpj2-6"; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + main_micbias_ena: main-micbias-ena { + samsung,pins = "gpj4-2"; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + /* Based on vendor kernel v2.6.35.7 */ sleep_cfg: sleep-cfg { PIN_SLP(gpa0-0, PREV, NONE); diff --git a/arch/arm/boot/dts/s5pv210-galaxys.dts b/arch/arm/boot/dts/s5pv210-galaxys.dts index 5d10dd67eacc..560f830b6f6b 100644 --- a/arch/arm/boot/dts/s5pv210-galaxys.dts +++ b/arch/arm/boot/dts/s5pv210-galaxys.dts @@ -72,6 +72,73 @@ pinctrl-0 = <&fm_irq &fm_rst>; }; }; + + micbias_reg: regulator-fixed-3 { + compatible = "regulator-fixed"; + regulator-name = "MICBIAS"; + gpio = <&gpj4 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&micbias_reg_ena>; + }; + + sound { + compatible = "samsung,aries-wm8994"; + + model = "Aries"; + + extcon = <&fsa9480>; + + main-micbias-supply = <&micbias_reg>; + headset-micbias-supply = <&micbias_reg>; + + earpath-sel-gpios = <&gpj2 6 GPIO_ACTIVE_HIGH>; + + io-channels = <&adc 3>; + io-channel-names = "headset-detect"; + headset-detect-gpios = <&gph0 6 GPIO_ACTIVE_LOW>; + headset-key-gpios = <&gph3 6 GPIO_ACTIVE_HIGH>; + + samsung,audio-routing = + "HP", "HPOUT1L", + "HP", "HPOUT1R", + + "SPK", "SPKOUTLN", + "SPK", "SPKOUTLP", + + "RCV", "HPOUT2N", + "RCV", "HPOUT2P", + + "LINE", "LINEOUT2N", + "LINE", "LINEOUT2P", + + "IN1LP", "Main Mic", + "IN1LN", "Main Mic", + + "IN1RP", "Headset Mic", + "IN1RN", "Headset Mic", + + "IN2LN", "FM In", + "IN2RN", "FM In", + + "Modem Out", "Modem TX", + "Modem RX", "Modem In", + + "Bluetooth SPK", "TX", + "RX", "Bluetooth Mic"; + + pinctrl-names = "default"; + pinctrl-0 = <&headset_det &earpath_sel>; + + cpu { + sound-dai = <&i2s0>, <&bt_codec>; + }; + + codec { + sound-dai = <&wm8994>; + }; + }; }; &aliases { @@ -88,6 +155,12 @@ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; + headset_det: headset-det { + samsung,pins = "gph0-6", "gph3-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_F>; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + }; + fm_irq: fm-irq { samsung,pins = "gpj2-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; @@ -102,6 +175,12 @@ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; + earpath_sel: earpath-sel { + samsung,pins = "gpj2-6"; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + massmemory_en: massmemory-en { samsung,pins = "gpj2-7"; samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; @@ -109,6 +188,12 @@ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; + micbias_reg_ena: micbias-reg-ena { + samsung,pins = "gpj4-2"; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + /* Based on CyanogenMod 3.0.101 kernel */ sleep_cfg: sleep-cfg { PIN_SLP(gpa0-0, PREV, NONE); diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/s5pv210-goni.dts index fbbd93707404..ad8d5d2fa32d 100644 --- a/arch/arm/boot/dts/s5pv210-goni.dts +++ b/arch/arm/boot/dts/s5pv210-goni.dts @@ -11,6 +11,8 @@ */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/input.h> #include "s5pv210.dtsi" @@ -33,52 +35,49 @@ 0x50000000 0x08000000>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; + pmic_ap_clk: clock-0 { + /* Workaround for missing clock on PMIC */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; - vtf_reg: fixed-regulator@0 { - compatible = "regulator-fixed"; - regulator-name = "V_TF_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - reg = <0>; - gpio = <&mp05 4 0>; - enable-active-high; - }; + vtf_reg: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "V_TF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&mp05 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - pda_reg: fixed-regulator@1 { - compatible = "regulator-fixed"; - regulator-name = "VCC_1.8V_PDA"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - reg = <1>; - }; + pda_reg: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1.8V_PDA"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; - bat_reg: fixed-regulator@2 { - compatible = "regulator-fixed"; - regulator-name = "V_BAT"; - regulator-min-microvolt = <3700000>; - regulator-max-microvolt = <3700000>; - reg = <2>; - }; + bat_reg: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "V_BAT"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; - tsp_reg: fixed-regulator@3 { - compatible = "regulator-fixed"; - regulator-name = "TSP_VDD"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - reg = <3>; - gpio = <&gpj1 3 0>; - enable-active-high; - }; + tsp_reg: regulator-3 { + compatible = "regulator-fixed"; + regulator-name = "TSP_VDD"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpj1 3 GPIO_ACTIVE_HIGH>; + enable-active-high; }; i2c_pmic: i2c-pmic { compatible = "i2c-gpio"; - gpios = <&gpj4 0 0>, /* sda */ - <&gpj4 3 0>; /* scl */ + sda-gpios = <&gpj4 0 GPIO_ACTIVE_HIGH>; + scl-gpios = <&gpj4 3 GPIO_ACTIVE_HIGH>; i2c-gpio,delay-us = <2>; /* ~100 kHz */ #address-cells = <1>; #size-cells = <0>; @@ -88,13 +87,13 @@ reg = <0x66>; max8998,pmic-buck1-default-dvs-idx = <0>; - max8998,pmic-buck1-dvs-gpios = <&gph0 3 0>, - <&gph0 4 0>; + max8998,pmic-buck1-dvs-gpios = <&gph0 3 GPIO_ACTIVE_HIGH>, + <&gph0 4 GPIO_ACTIVE_HIGH>; max8998,pmic-buck1-dvs-voltage = <1200000>, <1200000>, <1200000>, <1200000>; max8998,pmic-buck2-default-dvs-idx = <0>; - max8998,pmic-buck2-dvs-gpio = <&gph0 5 0>; + max8998,pmic-buck2-dvs-gpio = <&gph0 5 GPIO_ACTIVE_HIGH>; max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>; regulators { @@ -224,6 +223,11 @@ regulator-max-microvolt = <1200000>; regulator-always-on; }; + + ap32khz_reg: EN32KHz-AP { + regulator-name = "32KHz AP"; + regulator-always-on; + }; }; }; }; @@ -308,6 +312,11 @@ status = "okay"; }; +&rtc { + clocks = <&clocks CLK_RTC>, <&pmic_ap_clk>; + clock-names = "rtc", "rtc_src"; +}; + &sdhci0 { bus-width = <4>; non-removable; @@ -348,7 +357,7 @@ compatible = "atmel,maxtouch"; reg = <0x4a>; interrupt-parent = <&gpj0>; - interrupts = <5 2>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; atmel,x-line = <17>; atmel,y-line = <11>; @@ -378,8 +387,8 @@ clock-frequency = <16000000>; clocks = <&camera 0>; clock-names = "mclk"; - nreset-gpios = <&gpb 2 0>; - nstby-gpios = <&gpb 0 0>; + nreset-gpios = <&gpb 2 GPIO_ACTIVE_HIGH>; + nstby-gpios = <&gpb 0 GPIO_ACTIVE_HIGH>; port { noon010pc30_ep: endpoint { diff --git a/arch/arm/boot/dts/s5pv210-smdkc110.dts b/arch/arm/boot/dts/s5pv210-smdkc110.dts index e5aec6c526fb..0c623b78af72 100644 --- a/arch/arm/boot/dts/s5pv210-smdkc110.dts +++ b/arch/arm/boot/dts/s5pv210-smdkc110.dts @@ -30,6 +30,13 @@ device_type = "memory"; reg = <0x20000000 0x20000000>; }; + + pmic_ap_clk: clock-0 { + /* Workaround for missing PMIC and its clock */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; }; &xusbxti { @@ -54,6 +61,8 @@ &rtc { status = "okay"; + clocks = <&clocks CLK_RTC>, <&pmic_ap_clk>; + clock-names = "rtc", "rtc_src"; }; &i2c0 { diff --git a/arch/arm/boot/dts/s5pv210-smdkv210.dts b/arch/arm/boot/dts/s5pv210-smdkv210.dts index 84b38f185199..7459e41e8ef1 100644 --- a/arch/arm/boot/dts/s5pv210-smdkv210.dts +++ b/arch/arm/boot/dts/s5pv210-smdkv210.dts @@ -15,6 +15,7 @@ */ /dts-v1/; +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/input.h> #include "s5pv210.dtsi" @@ -31,11 +32,18 @@ reg = <0x20000000 0x40000000>; }; - ethernet@18000000 { + pmic_ap_clk: clock-0 { + /* Workaround for missing PMIC and its clock */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + ethernet@a8000000 { compatible = "davicom,dm9000"; reg = <0xA8000000 0x2 0xA8000002 0x2>; interrupt-parent = <&gph1>; - interrupts = <1 4>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; local-mac-address = [00 00 de ad be ef]; davicom,no-eeprom; }; @@ -147,6 +155,8 @@ &rtc { status = "okay"; + clocks = <&clocks CLK_RTC>, <&pmic_ap_clk>; + clock-names = "rtc", "rtc_src"; }; &sdhci0 { diff --git a/arch/arm/boot/dts/s5pv210-torbreck.dts b/arch/arm/boot/dts/s5pv210-torbreck.dts index cd25e72ccd84..e18259737684 100644 --- a/arch/arm/boot/dts/s5pv210-torbreck.dts +++ b/arch/arm/boot/dts/s5pv210-torbreck.dts @@ -30,6 +30,13 @@ device_type = "memory"; reg = <0x20000000 0x20000000>; }; + + pmic_ap_clk: clock-0 { + /* Workaround for missing PMIC and its clock */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; }; &xusbxti { @@ -54,6 +61,8 @@ &rtc { status = "okay"; + clocks = <&clocks CLK_RTC>, <&pmic_ap_clk>; + clock-names = "rtc", "rtc_src"; }; &sdhci0 { diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi index 1b0ee884e91d..2871351ab907 100644 --- a/arch/arm/boot/dts/s5pv210.dtsi +++ b/arch/arm/boot/dts/s5pv210.dtsi @@ -52,34 +52,26 @@ }; }; + xxti: oscillator-0 { + compatible = "fixed-clock"; + clock-frequency = <0>; + clock-output-names = "xxti"; + #clock-cells = <0>; + }; + + xusbxti: oscillator-1 { + compatible = "fixed-clock"; + clock-frequency = <0>; + clock-output-names = "xusbxti"; + #clock-cells = <0>; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; - external-clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - xxti: oscillator@0 { - compatible = "fixed-clock"; - reg = <0>; - clock-frequency = <0>; - clock-output-names = "xxti"; - #clock-cells = <0>; - }; - - xusbxti: oscillator@1 { - compatible = "fixed-clock"; - reg = <1>; - clock-frequency = <0>; - clock-output-names = "xusbxti"; - #clock-cells = <0>; - }; - }; - onenand: onenand@b0600000 { compatible = "samsung,s5pv210-onenand"; reg = <0xb0600000 0x2000>, @@ -100,19 +92,16 @@ }; clocks: clock-controller@e0100000 { - compatible = "samsung,s5pv210-clock", "simple-bus"; + compatible = "samsung,s5pv210-clock"; reg = <0xe0100000 0x10000>; clock-names = "xxti", "xusbxti"; clocks = <&xxti>, <&xusbxti>; #clock-cells = <1>; - #address-cells = <1>; - #size-cells = <1>; - ranges; + }; - pmu_syscon: syscon@e0108000 { - compatible = "samsung-s5pv210-pmu", "syscon"; - reg = <0xe0108000 0x8000>; - }; + pmu_syscon: syscon@e0108000 { + compatible = "samsung-s5pv210-pmu", "syscon"; + reg = <0xe0108000 0x8000>; }; pinctrl0: pinctrl@e0200000 { @@ -128,35 +117,28 @@ }; }; - amba { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges; - - pdma0: dma@e0900000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0xe0900000 0x1000>; - interrupt-parent = <&vic0>; - interrupts = <19>; - clocks = <&clocks CLK_PDMA0>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; + pdma0: dma@e0900000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xe0900000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <19>; + clocks = <&clocks CLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; - pdma1: dma@e0a00000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0xe0a00000 0x1000>; - interrupt-parent = <&vic0>; - interrupts = <20>; - clocks = <&clocks CLK_PDMA1>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; + pdma1: dma@e0a00000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xe0a00000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <20>; + clocks = <&clocks CLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; }; adc: adc@e1700000 { @@ -241,43 +223,36 @@ status = "disabled"; }; - audio-subsystem { - compatible = "samsung,s5pv210-audss", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - clk_audss: clock-controller@eee10000 { - compatible = "samsung,s5pv210-audss-clock"; - reg = <0xeee10000 0x1000>; - clock-names = "hclk", "xxti", - "fout_epll", - "sclk_audio0"; - clocks = <&clocks DOUT_HCLKP>, <&xxti>, - <&clocks FOUT_EPLL>, - <&clocks SCLK_AUDIO0>; - #clock-cells = <1>; - }; + clk_audss: clock-controller@eee10000 { + compatible = "samsung,s5pv210-audss-clock"; + reg = <0xeee10000 0x1000>; + clock-names = "hclk", "xxti", + "fout_epll", + "sclk_audio0"; + clocks = <&clocks DOUT_HCLKP>, <&xxti>, + <&clocks FOUT_EPLL>, + <&clocks SCLK_AUDIO0>; + #clock-cells = <1>; + }; - i2s0: i2s@eee30000 { - compatible = "samsung,s5pv210-i2s"; - reg = <0xeee30000 0x1000>; - interrupt-parent = <&vic2>; - interrupts = <16>; - dma-names = "rx", "tx", "tx-sec"; - dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>; - clock-names = "iis", - "i2s_opclk0", - "i2s_opclk1"; - clocks = <&clk_audss CLK_I2S>, - <&clk_audss CLK_I2S>, - <&clk_audss CLK_DOUT_AUD_BUS>; - samsung,idma-addr = <0xc0010000>; - pinctrl-names = "default"; - pinctrl-0 = <&i2s0_bus>; - #sound-dai-cells = <0>; - status = "disabled"; - }; + i2s0: i2s@eee30000 { + compatible = "samsung,s5pv210-i2s"; + reg = <0xeee30000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <16>; + dma-names = "rx", "tx", "tx-sec"; + dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>; + clock-names = "iis", + "i2s_opclk0", + "i2s_opclk1"; + clocks = <&clk_audss CLK_I2S>, + <&clk_audss CLK_I2S>, + <&clk_audss CLK_DOUT_AUD_BUS>; + samsung,idma-addr = <0xc0010000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_bus>; + #sound-dai-cells = <0>; + status = "disabled"; }; i2s1: i2s@e2100000 { diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi index 42f76212d472..84066c1298df 100644 --- a/arch/arm/boot/dts/sam9x60.dtsi +++ b/arch/arm/boot/dts/sam9x60.dtsi @@ -32,16 +32,17 @@ }; cpus { - #address-cells = <0>; + #address-cells = <1>; #size-cells = <0>; - cpu { + cpu@0 { compatible = "arm,arm926ej-s"; device_type = "cpu"; + reg = <0>; }; }; - memory { + memory@20000000 { device_type = "memory"; reg = <0x20000000 0x10000000>; }; @@ -61,6 +62,9 @@ sram: sram@300000 { compatible = "mmio-sram"; reg = <0x00300000 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00300000 0x100000>; }; ahb { diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index d7f25706892d..2ddc85dff8ce 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -72,7 +72,7 @@ }; }; - memory { + memory@20000000 { device_type = "memory"; reg = <0x20000000 0x20000000>; }; @@ -94,6 +94,9 @@ ns_sram: sram@200000 { compatible = "mmio-sram"; reg = <0x00200000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00200000 0x20000>; }; ahb { @@ -106,6 +109,10 @@ compatible = "mmio-sram"; no-memory-wc; reg = <0x00100000 0x2400>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00100000 0x2400>; + }; usb0: gadget@300000 { @@ -535,6 +542,8 @@ compatible = "atmel,at91rm9200-spi"; reg = <0x400 0x200>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; clock-names = "spi_clk"; dmas = <&dma0 @@ -603,6 +612,8 @@ compatible = "atmel,at91rm9200-spi"; reg = <0x400 0x200>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; clock-names = "spi_clk"; dmas = <&dma0 @@ -810,6 +821,8 @@ compatible = "atmel,at91rm9200-spi"; reg = <0x400 0x200>; interrupts = <21 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 21>; clock-names = "spi_clk"; dmas = <&dma0 @@ -878,6 +891,8 @@ compatible = "atmel,at91rm9200-spi"; reg = <0x400 0x200>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; clock-names = "spi_clk"; dmas = <&dma0 @@ -947,6 +962,8 @@ compatible = "atmel,at91rm9200-spi"; reg = <0x400 0x200>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; clock-names = "spi_clk"; dmas = <&dma0 diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 0bb5b6fa0748..86137f8d2b45 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -55,7 +55,7 @@ interrupts = <46 IRQ_TYPE_LEVEL_HIGH 0>; }; - memory { + memory@20000000 { device_type = "memory"; reg = <0x20000000 0x8000000>; }; @@ -83,6 +83,9 @@ sram: sram@300000 { compatible = "mmio-sram"; reg = <0x00300000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00300000 0x20000>; }; ahb { @@ -1073,6 +1076,9 @@ compatible = "mmio-sram"; no-memory-wc; reg = <0x200000 0x2400>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x200000 0x2400>; }; usb0: gadget@500000 { diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi index 65566e4b78d8..384335635792 100644 --- a/arch/arm/boot/dts/sama5d3xcm.dtsi +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi @@ -14,7 +14,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@20000000 { reg = <0x20000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi b/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi index 9d2563602cbe..5579c955f141 100644 --- a/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi +++ b/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi @@ -12,7 +12,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@20000000 { reg = <0x20000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 2d9f853ab15f..04f24cf752d3 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -53,7 +53,7 @@ }; }; - memory { + memory@20000000 { device_type = "memory"; reg = <0x20000000 0x20000000>; }; @@ -81,6 +81,9 @@ ns_sram: sram@210000 { compatible = "mmio-sram"; reg = <0x00210000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00210000 0x10000>; }; ahb { @@ -93,6 +96,9 @@ compatible = "mmio-sram"; no-memory-wc; reg = <0x100000 0x2400>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x100000 0x2400>; }; usb0: gadget@400000 { diff --git a/arch/arm/boot/dts/sd5203.dts b/arch/arm/boot/dts/sd5203.dts new file mode 100644 index 000000000000..3cc9a23910be --- /dev/null +++ b/arch/arm/boot/dts/sd5203.dts @@ -0,0 +1,96 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2020 Hisilicon Limited. + * + * DTS file for Hisilicon SD5203 Board + */ + +/dts-v1/; + +/ { + model = "Hisilicon SD5203"; + compatible = "H836ASDJ", "hisilicon,sd5203"; + interrupt-parent = <&vic>; + #address-cells = <1>; + #size-cells = <1>; + + chosen { + bootargs="console=ttyS0,9600 earlycon=uart8250,mmio32,0x1600d000"; + }; + + aliases { + serial0 = &uart0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0 { + device_type = "cpu"; + compatible = "arm,arm926ej-s"; + reg = <0x0>; + }; + }; + + memory@30000000 { + device_type = "memory"; + reg = <0x30000000 0x8000000>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + + vic: interrupt-controller@10130000 { + compatible = "snps,dw-apb-ictl"; + reg = <0x10130000 0x1000>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + refclk125mhz: refclk125mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + timer0: timer@16002000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x16002000 0x1000>; + interrupts = <4>; + clocks = <&refclk125mhz>; + clock-names = "apb_pclk"; + }; + + timer1: timer@16003000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x16003000 0x1000>; + interrupts = <5>; + clocks = <&refclk125mhz>; + clock-names = "apb_pclk"; + }; + + uart0: serial@1600d000 { + compatible = "snps,dw-apb-uart"; + reg = <0x1600d000 0x1000>; + bus_id = "uart0"; + clocks = <&refclk125mhz>; + clock-names = "baudclk", "apb_pclk"; + reg-shift = <2>; + interrupts = <17>; + }; + + uart1: serial@1600c000 { + compatible = "snps,dw-apb-uart"; + reg = <0x1600c000 0x1000>; + clocks = <&refclk125mhz>; + clock-names = "baudclk", "apb_pclk"; + reg-shift = <2>; + interrupts = <16>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index a4d63125ac56..30c67acc4e35 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -448,7 +448,7 @@ status = "disabled"; }; - pfc: pin-controller@e6050000 { + pfc: pinctrl@e6050000 { compatible = "renesas,pfc-sh73a0"; reg = <0xe6050000 0x8000>, <0xe605801c 0x1c>; diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi index f187da4485f4..c87b881b2c8b 100644 --- a/arch/arm/boot/dts/spear13xx.dtsi +++ b/arch/arm/boot/dts/spear13xx.dtsi @@ -43,7 +43,7 @@ 0 7 0x04>; }; - L2: l2-cache { + L2: cache-controller { compatible = "arm,pl310-cache"; reg = <0xed000000 0x1000>; cache-unified; diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index 33e3b0b3c53d..ff47cbf6ed3b 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -58,16 +58,21 @@ reg = <0x33>; label = "lp5521_pri"; clock-mode = /bits/ 8 <2>; - chan0 { + #address-cells = <1>; + #size-cells = <0>; + chan@0 { + reg = <0>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; linux,default-trigger = "heartbeat"; }; - chan1 { + chan@1 { + reg = <1>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; }; - chan2 { + chan@2 { + reg = <2>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; }; @@ -77,15 +82,20 @@ reg = <0x34>; label = "lp5521_sec"; clock-mode = /bits/ 8 <2>; - chan0 { + #address-cells = <1>; + #size-cells = <0>; + chan@0 { + reg = <0>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; }; - chan1 { + chan@1 { + reg = <1>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; }; - chan2 { + chan@2 { + reg = <2>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; }; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts index 1e26b711d43d..a1093cb37dc7 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts @@ -316,6 +316,28 @@ }; }; }; + + mcde@a0350000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dsi_default_mode>; + + dsi-controller@a0351000 { + panel@0 { + compatible = "samsung,s6e63m0"; + reg = <0>; + vdd3-supply = <&panel_reg_3v0>; + vci-supply = <&panel_reg_1v8>; + reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; + /* ESD (electrostatic discharge) detection interrupt */ + interrupt-parent = <&gpio2>; + interrupts = <18 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "esd"; + pinctrl-names = "default"; + pinctrl-0 = <&display_default_mode>; + }; + }; + }; }; gpio-keys { @@ -415,6 +437,40 @@ pinctrl-names = "default"; pinctrl-0 = <&wlan_en_default>; }; + + /* MIC5366 GPIO-controlled regulator */ + panel_reg_1v8: regulator-panel-1v8 { + compatible = "regulator-fixed"; + + regulator-name = "panel-fixed-supply"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + /* GPIO219 */ + gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>; + + startup-delay-us = <200>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_reg_default_mode>; + }; + + /* MIC5366 GPIO-controlled regulator */ + panel_reg_3v0: regulator-panel-3v0 { + compatible = "regulator-fixed"; + + regulator-name = "panel-fixed-supply"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + /* GPIO219 */ + gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>; + + startup-delay-us = <200>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_reg_default_mode>; + }; }; &pinctrl { @@ -476,6 +532,41 @@ }; }; + mcde { + dsi_default_mode: dsi_default { + default_mux1 { + /* Mux in VSI0 used for DSI TE */ + function = "lcd"; + groups = + "lcdvsi0_a_1"; /* VSI0 for LCD */ + }; + default_cfg1 { + pins = + "GPIO68_E1"; /* VSI0 */ + ste,config = <&in_nopull>; + }; + }; + }; + + display { + display_default_mode: display_default { + golden_cfg1 { + pins = "GPIO139_C9"; /* MIPI_DSI0_RESET_N */ + ste,config = <&gpio_out_lo>; + }; + golden_cfg2 { + pins = "GPIO82_C1"; /* LDI_ESD_DET */ + ste,config = <&gpio_in_pu>; + }; + }; + panel_reg_default_mode: panel_reg_default { + golden_cfg1 { + pins = "GPIO219_AG10"; /* LCD_PWR_EN */ + ste,config = <&gpio_out_lo>; + }; + }; + }; + proximity { proximity_default: proximity_default { golden_cfg1 { diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts index d6f6ac04a48a..27722c42b61c 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts @@ -108,15 +108,12 @@ }; }; - /* - * FIXME: this is not quite GPIO backlight. This is a - * KTD253 one-wire GPIO-controlled backlight. It can - * work as a GPIO backlight. - */ - gpio_bl: backlight { - compatible = "gpio-backlight"; + ktd253: backlight { + compatible = "kinetic,ktd253"; /* GPIO 69 */ - gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; + /* Default to 13/32 brightness */ + default-brightness = <13>; pinctrl-names = "default"; pinctrl-0 = <&gpio_backlight_default_mode>; }; @@ -409,7 +406,7 @@ reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&display_default_mode>; - backlight = <&gpio_bl>; + backlight = <&ktd253>; }; }; }; diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi index 69e2f1e78ed6..7febe19e780d 100644 --- a/arch/arm/boot/dts/stm32h743.dtsi +++ b/arch/arm/boot/dts/stm32h743.dtsi @@ -110,6 +110,7 @@ compatible = "st,stm32h7-spi"; reg = <0x40003800 0x400>; interrupts = <36>; + resets = <&rcc STM32H7_APB1L_RESET(SPI2)>; clocks = <&rcc SPI2_CK>; status = "disabled"; @@ -121,12 +122,13 @@ compatible = "st,stm32h7-spi"; reg = <0x40003c00 0x400>; interrupts = <51>; + resets = <&rcc STM32H7_APB1L_RESET(SPI3)>; clocks = <&rcc SPI3_CK>; status = "disabled"; }; usart2: serial@40004400 { - compatible = "st,stm32f7-uart"; + compatible = "st,stm32h7-uart"; reg = <0x40004400 0x400>; interrupts = <38>; status = "disabled"; @@ -194,7 +196,7 @@ }; usart1: serial@40011000 { - compatible = "st,stm32f7-uart"; + compatible = "st,stm32h7-uart"; reg = <0x40011000 0x400>; interrupts = <37>; status = "disabled"; @@ -207,6 +209,7 @@ compatible = "st,stm32h7-spi"; reg = <0x40013000 0x400>; interrupts = <35>; + resets = <&rcc STM32H7_APB2_RESET(SPI1)>; clocks = <&rcc SPI1_CK>; status = "disabled"; }; @@ -217,6 +220,7 @@ compatible = "st,stm32h7-spi"; reg = <0x40013400 0x400>; interrupts = <84>; + resets = <&rcc STM32H7_APB2_RESET(SPI4)>; clocks = <&rcc SPI4_CK>; status = "disabled"; }; @@ -227,6 +231,7 @@ compatible = "st,stm32h7-spi"; reg = <0x40015000 0x400>; interrupts = <85>; + resets = <&rcc STM32H7_APB2_RESET(SPI5)>; clocks = <&rcc SPI5_CK>; status = "disabled"; }; @@ -329,6 +334,16 @@ status = "disabled"; }; + ltdc: display-controller@50001000 { + compatible = "st,stm32-ltdc"; + reg = <0x50001000 0x200>; + interrupts = <88>, <89>; + resets = <&rcc STM32H7_APB3_RESET(LTDC)>; + clocks = <&rcc LTDC_CK>; + clock-names = "lcd"; + status = "disabled"; + }; + mdma1: dma-controller@52000000 { compatible = "st,stm32h7-mdma"; reg = <0x52000000 0x1000>; @@ -372,6 +387,7 @@ compatible = "st,stm32h7-spi"; reg = <0x58001400 0x400>; interrupts = <86>; + resets = <&rcc STM32H7_APB4_RESET(SPI6)>; clocks = <&rcc SPI6_CK>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi index b5a66429670c..d84686e00370 100644 --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi @@ -1437,6 +1437,24 @@ }; }; + sdmmc2_d47_pins_d: sdmmc2-d47-3 { + pins { + pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */ + <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */ + <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */ + <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */ + }; + }; + + sdmmc2_d47_sleep_pins_d: sdmmc2-d47-sleep-3 { + pins { + pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */ + <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */ + <STM32_PINMUX('E', 5, ANALOG)>, /* SDMMC2_D6 */ + <STM32_PINMUX('C', 7, ANALOG)>; /* SDMMC2_D7 */ + }; + }; + sdmmc3_b4_pins_a: sdmmc3-b4-0 { pins1 { pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */ @@ -1700,6 +1718,14 @@ }; }; + uart8_rtscts_pins_a: uart8rtscts-0 { + pins { + pinmux = <STM32_PINMUX('G', 7, AF8)>, /* UART8_RTS */ + <STM32_PINMUX('G', 10, AF8)>; /* UART8_CTS */ + bias-disable; + }; + }; + spi4_pins_a: spi4-0 { pins { pinmux = <STM32_PINMUX('E', 12, AF5)>, /* SPI4_SCK */ diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index bfe29023fbd5..84757901cd8d 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -23,6 +23,13 @@ }; }; + arm-pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>; + interrupt-parent = <&intc>; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -1302,23 +1309,38 @@ dma-requests = <48>; }; - fmc: nand-controller@58002000 { - compatible = "st,stm32mp15-fmc2"; - reg = <0x58002000 0x1000>, - <0x80000000 0x1000>, - <0x88010000 0x1000>, - <0x88020000 0x1000>, - <0x81000000 0x1000>, - <0x89010000 0x1000>, - <0x89020000 0x1000>; - interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&mdma1 20 0x10 0x12000a02 0x0 0x0>, - <&mdma1 20 0x10 0x12000a08 0x0 0x0>, - <&mdma1 21 0x10 0x12000a0a 0x0 0x0>; - dma-names = "tx", "rx", "ecc"; + fmc: memory-controller@58002000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "st,stm32mp1-fmc2-ebi"; + reg = <0x58002000 0x1000>; clocks = <&rcc FMC_K>; resets = <&rcc FMC_R>; status = "disabled"; + + ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */ + <1 0 0x64000000 0x04000000>, /* EBI CS 2 */ + <2 0 0x68000000 0x04000000>, /* EBI CS 3 */ + <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */ + <4 0 0x80000000 0x10000000>; /* NAND */ + + nand-controller@4,0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32mp1-fmc2-nfc"; + reg = <4 0x00000000 0x1000>, + <4 0x08010000 0x1000>, + <4 0x08020000 0x1000>, + <4 0x01000000 0x1000>, + <4 0x09010000 0x1000>, + <4 0x09020000 0x1000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&mdma1 20 0x2 0x12000a02 0x0 0x0>, + <&mdma1 20 0x2 0x12000a08 0x0 0x0>, + <&mdma1 21 0x2 0x12000a0a 0x0 0x0>; + dma-names = "tx", "rx", "ecc"; + status = "disabled"; + }; }; qspi: spi@58003000 { diff --git a/arch/arm/boot/dts/stm32mp153.dtsi b/arch/arm/boot/dts/stm32mp153.dtsi index 6d9ab08667fc..1c1889b194cf 100644 --- a/arch/arm/boot/dts/stm32mp153.dtsi +++ b/arch/arm/boot/dts/stm32mp153.dtsi @@ -16,6 +16,12 @@ }; }; + arm-pmu { + interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>; + }; + soc { m_can1: can@4400e000 { compatible = "bosch,m_can"; diff --git a/arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dts b/arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dts new file mode 100644 index 000000000000..02a39132958e --- /dev/null +++ b/arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dts @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (C) 2020 Marek Vasut <marex@denx.de> + * + * DHCOM STM32MP1 variant: + * DHCM-STM32MP153C-C065-R102-F0819-SPI-E2-CAN2-RTC-I-01D2 + * DHCOM PCB number: 587-200 or newer + * DRC02 PCB number: 568-100 or newer + */ +/dts-v1/; + +#include "stm32mp153.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15xx-dhcom-som.dtsi" +#include "stm32mp15xx-dhcom-drc02.dtsi" + +/ { + model = "DH electronics STM32MP153C DHCOM DRC02"; + compatible = "dh,stm32mp153c-dhcom-drc02", "dh,stm32mp153c-dhcom-som", + "st,stm32mp153"; +}; + +&m_can1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&m_can1_pins_a>; + pinctrl-1 = <&m_can1_sleep_pins_a>; + status = "okay"; +}; + +&m_can2 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&m_can2_pins_a>; + pinctrl-1 = <&m_can2_sleep_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts b/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts index 197aa98d49e2..d3b81382f97c 100644 --- a/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts +++ b/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts @@ -4,7 +4,7 @@ * * DHCOM STM32MP1 variant: * DHCM-STM32MP157C-C065-R102-F0819-SPI-E2-CAN2-SDR104-RTC-WBT-T-DSI-I-01D2 - * DHCOR PCB number: 587-200 or newer + * DHCOM PCB number: 587-200 or newer * PDK2 PCB number: 516-400 or newer */ /dts-v1/; @@ -15,7 +15,7 @@ #include "stm32mp15xx-dhcom-pdk2.dtsi" / { - model = "DH Electronics STM32MP157C DHCOM Premium Developer Kit (2)"; + model = "DH electronics STM32MP157C DHCOM Premium Developer Kit (2)"; compatible = "dh,stm32mp157c-dhcom-pdk2", "dh,stm32mp157c-dhcom-som", "st,stm32mp157"; }; diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index 85628e16d2d5..a55e80ce2602 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -158,14 +158,16 @@ pinctrl-0 = <&fmc_pins_a>; pinctrl-1 = <&fmc_sleep_pins_a>; status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - nand@0 { - reg = <0>; - nand-on-flash-bbt; - #address-cells = <1>; - #size-cells = <1>; + nand-controller@4,0 { + status = "okay"; + + nand@0 { + reg = <0>; + nand-on-flash-bbt; + #address-cells = <1>; + #size-cells = <1>; + }; }; }; diff --git a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts index 5700e6b700d3..1e5333fd437f 100644 --- a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts +++ b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts @@ -121,8 +121,6 @@ reset-gpios = <&gpiog 0 GPIO_ACTIVE_LOW>; /* ETH_RST# */ interrupt-parent = <&gpioa>; interrupts = <6 IRQ_TYPE_EDGE_FALLING>; /* ETH_MDINT# */ - rxc-skew-ps = <1860>; - txc-skew-ps = <1860>; reset-assert-us = <10000>; reset-deassert-us = <300>; micrel,force-master; @@ -214,6 +212,7 @@ pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_b>; pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_b>; bus-width = <8>; + mmc-ddr-3_3v; no-1-8-v; no-sd; no-sdio; diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi b/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi new file mode 100644 index 000000000000..6cf49a0a9e69 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi @@ -0,0 +1,276 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2020 Marcin Sloniewski <marcin.sloniewski@gmail.com>. + */ + +/dts-v1/; + +#include "stm32mp157.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxac-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/mfd/st,stpmic1.h> + +/ { + model = "Seeed Studio Odyssey-STM32MP157C SOM"; + compatible = "seeed,stm32mp157c-odyssey-som", "st,stm32mp157"; + + memory@c0000000 { + device_type = "memory"; + reg = <0xc0000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mcuram2: mcuram2@10000000 { + compatible = "shared-dma-pool"; + reg = <0x10000000 0x40000>; + no-map; + }; + + vdev0vring0: vdev0vring0@10040000 { + compatible = "shared-dma-pool"; + reg = <0x10040000 0x1000>; + no-map; + }; + + vdev0vring1: vdev0vring1@10041000 { + compatible = "shared-dma-pool"; + reg = <0x10041000 0x1000>; + no-map; + }; + + vdev0buffer: vdev0buffer@10042000 { + compatible = "shared-dma-pool"; + reg = <0x10042000 0x4000>; + no-map; + }; + + mcuram: mcuram@30000000 { + compatible = "shared-dma-pool"; + reg = <0x30000000 0x40000>; + no-map; + }; + + retram: retram@38000000 { + compatible = "shared-dma-pool"; + reg = <0x38000000 0x10000>; + no-map; + }; + + gpu_reserved: gpu@d4000000 { + reg = <0xd4000000 0x4000000>; + no-map; + }; + }; + + led { + compatible = "gpio-leds"; + led-blue { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpiog 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&gpu { + contiguous-area = <&gpu_reserved>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + + pmic: stpmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + + regulators { + compatible = "st,stpmic1-regulators"; + ldo1-supply = <&v3v3>; + ldo3-supply = <&vdd_ddr>; + ldo6-supply = <&v3v3>; + pwr_sw1-supply = <&bst_out>; + pwr_sw2-supply = <&bst_out>; + + vddcore: buck1 { + regulator-name = "vddcore"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd_ddr: buck2 { + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd: buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + st,mask-reset; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + v3v3: buck4 { + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-over-current-protection; + regulator-initial-mode = <0>; + }; + + v1v8_audio: ldo1 { + regulator-name = "v1v8_audio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO1 0>; + }; + + v3v3_hdmi: ldo2 { + regulator-name = "v3v3_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO2 0>; + }; + + vtt_ddr: ldo3 { + regulator-name = "vtt_ddr"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + regulator-over-current-protection; + }; + + vdd_usb: ldo4 { + regulator-name = "vdd_usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + interrupts = <IT_CURLIM_LDO4 0>; + }; + + vdda: ldo5 { + regulator-name = "vdda"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = <IT_CURLIM_LDO5 0>; + regulator-boot-on; + }; + + v1v2_hdmi: ldo6 { + regulator-name = "v1v2_hdmi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO6 0>; + }; + + vref_ddr: vref_ddr { + regulator-name = "vref_ddr"; + regulator-always-on; + regulator-over-current-protection; + }; + + bst_out: boost { + regulator-name = "bst_out"; + interrupts = <IT_OCP_BOOST 0>; + }; + + vbus_otg: pwr_sw1 { + regulator-name = "vbus_otg"; + interrupts = <IT_OCP_OTG 0>; + }; + + vbus_sw: pwr_sw2 { + regulator-name = "vbus_sw"; + interrupts = <IT_OCP_SWOUT 0>; + regulator-active-discharge; + }; + }; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>; + interrupt-names = "onkey-falling", "onkey-rising"; + power-off-time-sec = <10>; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + status = "disabled"; + }; + }; +}; + +&ipcc { + status = "okay"; +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + +&m4_rproc { + memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, + <&vdev0vring1>, <&vdev0buffer>; + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>; + mbox-names = "vq0", "vq1", "shutdown"; + interrupt-parent = <&exti>; + interrupts = <68 1>; + status = "okay"; +}; + +&rng1 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&sdmmc2 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_d>; + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_d>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_d>; + non-removable; + no-sd; + no-sdio; + st,neg-edge; + bus-width = <8>; + vmmc-supply = <&v3v3>; + vqmmc-supply = <&v3v3>; + mmc-ddr-3_3v; + status = "okay"; +}; + diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey.dts b/arch/arm/boot/dts/stm32mp157c-odyssey.dts new file mode 100644 index 000000000000..a7ffec8f1516 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157c-odyssey.dts @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2020 Marcin Sloniewski <marcin.sloniewski@gmail.com>. + */ + +/dts-v1/; + +#include "stm32mp157c-odyssey-som.dtsi" + +/ { + model = "Seeed Studio Odyssey-STM32MP157C Board"; + compatible = "seeed,stm32mp157c-odyssey", + "seeed,stm32mp157c-odyssey-som", "st,stm32mp157"; + + aliases { + ethernet0 = ðernet0; + serial0 = &uart4; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rgmii_pins_a>; + pinctrl-1 = <ðernet0_rgmii_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rgmii-id"; + max-speed = <1000>; + phy-handle = <&phy0>; + assigned-clocks = <&rcc ETHCK_K>, <&rcc PLL4_P>; + assigned-clock-parents = <&rcc PLL4_P>; + assigned-clock-rates = <125000000>; /* Clock PLL4 to 750Mhz in ATF/U-Boot */ + st,eth-clk-sel; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@7 { /* KSZ9031RN */ + reg = <7>; + reset-gpios = <&gpiog 0 GPIO_ACTIVE_LOW>; /* ETH_RST# */ + reset-assert-us = <10000>; + reset-deassert-us = <300>; + }; + }; +}; + +&i2c1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_pins_a>; + pinctrl-1 = <&i2c1_sleep_pins_a>; + i2c-scl-rising-time-ns = <100>; + i2c-scl-falling-time-ns = <7>; + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + cd-gpios = <&gpiob 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + disable-wp; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; +}; + diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi new file mode 100644 index 000000000000..62ab23824a3e --- /dev/null +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi @@ -0,0 +1,157 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (C) 2020 Marek Vasut <marex@denx.de> + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + aliases { + serial0 = &uart4; + serial1 = &usart3; + serial2 = &uart8; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&adc { + status = "disabled"; +}; + +&dac { + status = "disabled"; +}; + +&gpiob { + /* + * NOTE: On DRC02, the RS485_RX_En is controlled by a separate + * GPIO line, however the STM32 UART driver assumes RX happens + * during TX anyway and that it only controls drive enable DE + * line. Hence, the RX is always enabled here. + */ + rs485-rx-en { + gpio-hog; + gpios = <8 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "rs485-rx-en"; + }; +}; + +&gpiod { + gpio-line-names = "", "", "", "", + "", "", "", "", + "", "", "", "Out1", + "Out2", "", "", ""; +}; + +&gpioi { + gpio-line-names = "In1", "", "", "", + "", "", "", "", + "In2", "", "", "", + "", "", "", ""; + + /* + * NOTE: The USB Hub on the DRC02 needs a reset signal to be + * pulled high in order to be detected by the USB Controller. + * This signal should be handled by USB power sequencing in + * order to reset the Hub when USB bus is powered down, but + * so far there is no such functionality. + */ + usb-hub { + gpio-hog; + gpios = <2 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "usb-hub-reset"; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + pagesize = <16>; + }; +}; + +&i2c5 { /* TP7/TP8 */ + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; +}; + +&sdmmc3 { + /* + * On DRC02, the SoM does not have SDIO WiFi. The pins + * are used for on-board microSD slot instead. + */ + /delete-property/broken-cd; + cd-gpios = <&gpioi 10 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + disable-wp; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins_a>; + cs-gpios = <&gpioz 3 0>; + /* Use PIO for the display */ + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; /* Enable once there is display driver */ + /* + * Note: PF3/GPIO_A , PD6/GPIO_B , PG0/GPIO_C , PC6/GPIO_E are + * also connected to the display board connector. + */ +}; + +&usart3 { + pinctrl-names = "default"; + pinctrl-0 = <&usart3_pins_a>; + status = "okay"; +}; + +/* + * Note: PI3 is UART1_RTS and PI5 is UART1_CTS on DRC02 (uart4 of STM32MP1), + * however the STM32MP1 pinmux cannot map them to UART4 . + */ + +&uart8 { /* RS485 */ + linux,rs485-enabled-at-boot-time; + pinctrl-names = "default"; + pinctrl-0 = <&uart8_pins_a>; + rts-gpios = <&gpioe 6 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&usbh_ehci { + phys = <&usbphyc_port0>; + status = "okay"; +}; + +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <&vdd_usb>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18>; +}; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi index 7c4bd615b311..5dff24e39af8 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi @@ -11,7 +11,6 @@ serial0 = &uart4; serial1 = &usart3; serial2 = &uart8; - ethernet0 = ðernet0; }; chosen { @@ -26,23 +25,13 @@ display_bl: display-bl { compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; + pwms = <&pwm2 3 500000 PWM_POLARITY_INVERTED>; brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>; default-brightness-level = <8>; enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>; status = "okay"; }; - ethernet_vio: vioregulator { - compatible = "regulator-fixed"; - regulator-name = "vio"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpiog 3 GPIO_ACTIVE_LOW>; - regulator-always-on; - regulator-boot-on; - }; - gpio-keys-polled { compatible = "gpio-keys-polled"; #size-cells = <0>; @@ -141,28 +130,6 @@ status = "okay"; }; -ðernet0 { - status = "okay"; - pinctrl-0 = <ðernet0_rmii_pins_a>; - pinctrl-1 = <ðernet0_rmii_sleep_pins_a>; - pinctrl-names = "default", "sleep"; - phy-mode = "rmii"; - max-speed = <100>; - phy-handle = <&phy0>; - st,eth-ref-clk-sel; - phy-reset-gpios = <&gpioh 15 GPIO_ACTIVE_LOW>; - - mdio0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dwmac-mdio"; - - phy0: ethernet-phy@1 { - reg = <1>; - }; - }; -}; - &i2c2 { /* Header X22 */ pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins_a>; @@ -304,7 +271,8 @@ &uart8 { pinctrl-names = "default"; - pinctrl-0 = <&uart8_pins_a>; + pinctrl-0 = <&uart8_pins_a &uart8_rtscts_pins_a>; + uart-has-rtscts; status = "okay"; }; @@ -314,9 +282,12 @@ }; &usbotg_hs { - dr_mode = "peripheral"; - phys = <&usbphyc_port1 0>; + dr_mode = "otg"; + pinctrl-0 = <&usbotg_hs_pins_a>; + pinctrl-names = "default"; phy-names = "usb2-phy"; + phys = <&usbphyc_port1 0>; + vbus-supply = <&vbus_otg>; status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi index ba905196fb54..b4b52cf634af 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi @@ -9,6 +9,10 @@ #include <dt-bindings/mfd/st,stpmic1.h> / { + aliases { + ethernet0 = ðernet0; + }; + memory@c0000000 { device_type = "memory"; reg = <0xC0000000 0x40000000>; @@ -55,6 +59,16 @@ no-map; }; }; + + ethernet_vio: vioregulator { + compatible = "regulator-fixed"; + regulator-name = "vio"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpiog 3 GPIO_ACTIVE_LOW>; + regulator-always-on; + regulator-boot-on; + }; }; &adc { @@ -94,6 +108,28 @@ status = "okay"; }; +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rmii_pins_a>; + pinctrl-1 = <ðernet0_rmii_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rmii"; + max-speed = <100>; + phy-handle = <&phy0>; + st,eth-ref-clk-sel; + phy-reset-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy0: ethernet-phy@1 { + reg = <1>; + }; + }; +}; + &i2c4 { pinctrl-names = "default"; pinctrl-0 = <&i2c4_pins_a>; @@ -249,7 +285,7 @@ compatible = "ti,tsc2004"; reg = <0x49>; vio-supply = <&v3v3>; - interrupts-extended = <&gpioh 3 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&gpioh 15 IRQ_TYPE_EDGE_FALLING>; }; eeprom@50 { @@ -285,8 +321,8 @@ &qspi { pinctrl-names = "default", "sleep"; - pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>; - pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a &qspi_bk2_sleep_pins_a>; + pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>; reg = <0x58003000 0x1000>, <0x70000000 0x4000000>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi index 930202742a3f..ec02cee1dd9b 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi @@ -295,9 +295,9 @@ &sdmmc2 { pinctrl-names = "default", "opendrain", "sleep"; - pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_b>; - pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_b>; - pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_b>; + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_c>; + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_c>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_c>; bus-width = <8>; mmc-ddr-1_8v; no-sd; @@ -351,6 +351,7 @@ label = "LS-UART0"; pinctrl-names = "default"; pinctrl-0 = <&uart7_pins_a>; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts index 8692b11a83c3..af8ab736fd3c 100644 --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts @@ -60,6 +60,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -133,6 +144,20 @@ status = "okay"; }; +&de { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { status = "okay"; diff --git a/arch/arm/boot/dts/sun8i-a33-olinuxino.dts b/arch/arm/boot/dts/sun8i-a33-olinuxino.dts index 3d78169cdeed..a1953b2872d0 100644 --- a/arch/arm/boot/dts/sun8i-a33-olinuxino.dts +++ b/arch/arm/boot/dts/sun8i-a33-olinuxino.dts @@ -194,8 +194,8 @@ "Headphone", "Headphone Jack"; /* Board level routing. First 2 routes copied from SoC level */ simple-audio-card,routing = - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right", + "Left DAC", "DACL", + "Right DAC", "DACR", "HP", "HPCOM", "Headphone Jack", "HP", "MIC1", "Microphone Jack", diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi index cfd3858afb3e..c458f5fb124f 100644 --- a/arch/arm/boot/dts/sun8i-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -189,8 +189,8 @@ simple-audio-card,mclk-fs = <128>; simple-audio-card,aux-devs = <&codec_analog>; simple-audio-card,routing = - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right"; + "Left DAC", "DACL", + "Right DAC", "DACR"; status = "disabled"; simple-audio-card,cpu { diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts index ea15073f0c79..2fc62ef0cb3e 100644 --- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts +++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts @@ -164,6 +164,10 @@ #include "axp22x.dtsi" +&ir0 { + status = "okay"; +}; + &mmc0 { vmmc-supply = <®_dcdc1>; bus-width = <4>; diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi index b782041e0e04..7907569e7b5c 100644 --- a/arch/arm/boot/dts/sun8i-r40.dtsi +++ b/arch/arm/boot/dts/sun8i-r40.dtsi @@ -190,6 +190,29 @@ }; }; + syscon: system-control@1c00000 { + compatible = "allwinner,sun8i-r40-system-control", + "allwinner,sun4i-a10-system-control"; + reg = <0x01c00000 0x30>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram_c: sram@1d00000 { + compatible = "mmio-sram"; + reg = <0x01d00000 0xd0000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x01d00000 0xd0000>; + + ve_sram: sram-section@0 { + compatible = "allwinner,sun8i-r40-sram-c1", + "allwinner,sun4i-a10-sram-c1"; + reg = <0x000000 0x80000>; + }; + }; + }; + nmi_intc: interrupt-controller@1c00030 { compatible = "allwinner,sun7i-a20-sc-nmi"; interrupt-controller; @@ -198,6 +221,18 @@ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; }; + dma: dma-controller@1c02000 { + compatible = "allwinner,sun8i-r40-dma", + "allwinner,sun50i-a64-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_DMA>; + dma-channels = <16>; + dma-requests = <31>; + resets = <&ccu RST_BUS_DMA>; + #dma-cells = <1>; + }; + spi0: spi@1c05000 { compatible = "allwinner,sun8i-r40-spi", "allwinner,sun8i-h3-spi"; @@ -238,6 +273,17 @@ status = "disabled"; }; + video-codec@1c0e000 { + compatible = "allwinner,sun8i-r40-video-engine"; + reg = <0x01c0e000 0x1000>; + clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>, + <&ccu CLK_DRAM_VE>; + clock-names = "ahb", "mod", "ram"; + resets = <&ccu RST_BUS_VE>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + allwinner,sram = <&ve_sram 1>; + }; + mmc0: mmc@1c0f000 { compatible = "allwinner,sun8i-r40-mmc", "allwinner,sun50i-a64-mmc"; @@ -501,6 +547,16 @@ function = "i2c4"; }; + ir0_pins: ir0-pins { + pins = "PB4"; + function = "ir0"; + }; + + ir1_pins: ir1-pins { + pins = "PB23"; + function = "ir1"; + }; + mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; @@ -579,6 +635,32 @@ clocks = <&osc24M>; }; + ir0: ir@1c21800 { + compatible = "allwinner,sun8i-r40-ir", + "allwinner,sun6i-a31-ir"; + reg = <0x01c21800 0x400>; + pinctrl-0 = <&ir0_pins>; + pinctrl-names = "default"; + clocks = <&ccu CLK_BUS_IR0>, <&ccu CLK_IR0>; + clock-names = "apb", "ir"; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + resets = <&ccu RST_BUS_IR0>; + status = "disabled"; + }; + + ir1: ir@1c21c00 { + compatible = "allwinner,sun8i-r40-ir", + "allwinner,sun6i-a31-ir"; + reg = <0x01c21c00 0x400>; + pinctrl-0 = <&ir1_pins>; + pinctrl-names = "default"; + clocks = <&ccu CLK_BUS_IR1>, <&ccu CLK_IR1>; + clock-names = "apb", "ir"; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + resets = <&ccu RST_BUS_IR1>; + status = "disabled"; + }; + ths: thermal-sensor@1c24c00 { compatible = "allwinner,sun8i-r40-ths"; reg = <0x01c24c00 0x100>; @@ -743,6 +825,28 @@ #size-cells = <0>; }; + mali: gpu@1c40000 { + compatible = "allwinner,sun8i-r40-mali", "arm,mali-400"; + reg = <0x01c40000 0x10000>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pmu"; + clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>; + clock-names = "bus", "core"; + resets = <&ccu RST_BUS_GPU>; + }; + gmac: ethernet@1c50000 { compatible = "allwinner,sun8i-r40-gmac"; syscon = <&ccu>; diff --git a/arch/arm/boot/dts/sun8i-s3-pinecube.dts b/arch/arm/boot/dts/sun8i-s3-pinecube.dts new file mode 100644 index 000000000000..9bab6b7f4014 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-s3-pinecube.dts @@ -0,0 +1,235 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR X11) +/* + * Copyright 2019 Icenowy Zheng <icenowy@aosc.io> + */ + +/dts-v1/; +#include "sun8i-v3.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "PineCube IP Camera"; + compatible = "pine64,pinecube", "allwinner,sun8i-s3"; + + aliases { + serial0 = &uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + led1 { + label = "pine64:ir:led1"; + gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; /* PB10 */ + }; + + led2 { + label = "pine64:ir:led2"; + gpios = <&pio 1 12 GPIO_ACTIVE_LOW>; /* PB12 */ + }; + }; + + reg_vcc5v0: vcc5v0 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_vcc_wifi: vcc-wifi { + compatible = "regulator-fixed"; + regulator-name = "vcc-wifi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pio 1 2 GPIO_ACTIVE_LOW>; /* PB2 WIFI-EN */ + vin-supply = <®_dcdc3>; + startup-delay-us = <200000>; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pio 1 3 GPIO_ACTIVE_LOW>; /* PB3 WIFI-RST */ + post-power-on-delay-ms = <200>; + }; +}; + +&csi1 { + pinctrl-names = "default"; + pinctrl-0 = <&csi1_8bit_pins>; + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + csi1_ep: endpoint { + remote-endpoint = <&ov5640_ep>; + bus-width = <8>; + hsync-active = <1>; /* Active high */ + vsync-active = <0>; /* Active low */ + data-active = <1>; /* Active high */ + pclk-sample = <1>; /* Rising */ + }; + }; +}; + +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp203", + "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pe_pins>; + status = "okay"; + + ov5640: camera@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + pinctrl-names = "default"; + pinctrl-0 = <&csi1_mclk_pin>; + clocks = <&ccu CLK_CSI1_MCLK>; + clock-names = "xclk"; + + AVDD-supply = <®_ldo3>; + DOVDD-supply = <®_ldo3>; + DVDD-supply = <®_ldo4>; + reset-gpios = <&pio 4 23 GPIO_ACTIVE_LOW>; /* PE23 */ + powerdown-gpios = <&pio 4 24 GPIO_ACTIVE_HIGH>; /* PE24 */ + + port { + ov5640_ep: endpoint { + remote-endpoint = <&csi1_ep>; + bus-width = <8>; + hsync-active = <1>; /* Active high */ + vsync-active = <0>; /* Active low */ + data-active = <1>; /* Active high */ + pclk-sample = <1>; /* Rising */ + }; + }; + }; +}; + +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button-200 { + label = "Setup"; + linux,code = <KEY_SETUP>; + channel = <0>; + voltage = <190000>; + }; +}; + +&mmc0 { + vmmc-supply = <®_dcdc3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&mmc1 { + vmmc-supply = <®_vcc_wifi>; + vqmmc-supply = <®_dcdc3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&pio { + vcc-pd-supply = <®_dcdc3>; + vcc-pe-supply = <®_ldo3>; +}; + +#include "axp209.dtsi" + +&ac_power_supply { + status = "okay"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd-sys-cpu-ephy"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_ldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "avdd-dovdd-2v8-csi"; + regulator-soft-start; + regulator-ramp-delay = <1600>; +}; + +®_ldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "dvdd-1v8-csi"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "winbond,w25q128", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + }; +}; + +&uart2 { + status = "okay"; +}; + +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + usb0_vbus-supply = <®_vcc5v0>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-v3.dtsi b/arch/arm/boot/dts/sun8i-v3.dtsi index 6ae8645ade50..ca4672ed2e02 100644 --- a/arch/arm/boot/dts/sun8i-v3.dtsi +++ b/arch/arm/boot/dts/sun8i-v3.dtsi @@ -9,6 +9,19 @@ compatible = "allwinner,sun8i-v3-ccu"; }; +&emac { + /delete-property/ phy-handle; + /delete-property/ phy-mode; +}; + +&mdio_mux { + external_mdio: mdio@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; + &pio { compatible = "allwinner,sun8i-v3-pinctrl"; }; diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi index e5312869c0d2..0c7341676921 100644 --- a/arch/arm/boot/dts/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -43,12 +43,28 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/sun8i-v3s-ccu.h> #include <dt-bindings/reset/sun8i-v3s-ccu.h> +#include <dt-bindings/clock/sun8i-de2.h> / { #address-cells = <1>; #size-cells = <1>; interrupt-parent = <&gic>; + chosen { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + framebuffer-lcd { + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; + allwinner,pipeline = "mixer0-lcd0"; + clocks = <&display_clocks CLK_MIXER0>, + <&ccu CLK_TCON0>; + status = "disabled"; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -138,6 +154,15 @@ }; }; + syscon: system-control@1c00000 { + compatible = "allwinner,sun8i-v3s-system-control", + "allwinner,sun8i-h3-system-control"; + reg = <0x01c00000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + }; + tcon0: lcd-controller@1c0c000 { compatible = "allwinner,sun8i-v3s-tcon"; reg = <0x01c0c000 0x1000>; @@ -234,6 +259,17 @@ #size-cells = <0>; }; + crypto@1c15000 { + compatible = "allwinner,sun8i-v3s-crypto", + "allwinner,sun8i-a33-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_CE>; + reset-names = "ahb"; + }; + usb_otg: usb@1c19000 { compatible = "allwinner,sun8i-h3-musb"; reg = <0x01c19000 0x0400>; @@ -292,16 +328,41 @@ interrupt-controller; #interrupt-cells = <3>; + /omit-if-no-ref/ + csi1_8bit_pins: csi1-8bit-pins { + pins = "PE0", "PE2", "PE3", "PE8", "PE9", + "PE10", "PE11", "PE12", "PE13", "PE14", + "PE15"; + function = "csi"; + }; + + /omit-if-no-ref/ + csi1_mclk_pin: csi1-mclk-pin { + pins = "PE1"; + function = "csi"; + }; + i2c0_pins: i2c0-pins { pins = "PB6", "PB7"; function = "i2c0"; }; + /omit-if-no-ref/ + i2c1_pe_pins: i2c1-pe-pins { + pins = "PE21", "PE22"; + function = "i2c1"; + }; + uart0_pb_pins: uart0-pb-pins { pins = "PB8", "PB9"; function = "uart0"; }; + uart2_pins: uart2-pins { + pins = "PB0", "PB1"; + function = "uart2"; + }; + mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; @@ -377,6 +438,8 @@ reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART2>; resets = <&ccu RST_BUS_UART2>; + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; status = "disabled"; }; @@ -404,6 +467,49 @@ #size-cells = <0>; }; + emac: ethernet@1c30000 { + compatible = "allwinner,sun8i-v3s-emac"; + syscon = <&syscon>; + reg = <0x01c30000 0x10000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + resets = <&ccu RST_BUS_EMAC>; + reset-names = "stmmaceth"; + clocks = <&ccu CLK_BUS_EMAC>; + clock-names = "stmmaceth"; + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + status = "disabled"; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; + + mdio_mux: mdio-mux { + compatible = "allwinner,sun8i-h3-mdio-mux"; + #address-cells = <1>; + #size-cells = <0>; + + mdio-parent-bus = <&mdio>; + /* Only one MDIO is usable at the time */ + internal_mdio: mdio@1 { + compatible = "allwinner,sun8i-h3-mdio-internal"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + int_mii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + clocks = <&ccu CLK_BUS_EPHY>; + resets = <&ccu RST_BUS_EPHY>; + }; + }; + }; + }; + spi0: spi@1c68000 { compatible = "allwinner,sun8i-h3-spi"; reg = <0x01c68000 0x1000>; @@ -418,6 +524,18 @@ #size-cells = <0>; }; + csi1: camera@1cb4000 { + compatible = "allwinner,sun8i-v3s-csi"; + reg = <0x01cb4000 0x3000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CSI>, + <&ccu CLK_CSI1_SCLK>, + <&ccu CLK_DRAM_CSI>; + clock-names = "bus", "mod", "ram"; + resets = <&ccu RST_BUS_CSI>; + status = "disabled"; + }; + gic: interrupt-controller@1c81000 { compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, diff --git a/arch/arm/boot/dts/tango4-common.dtsi b/arch/arm/boot/dts/tango4-common.dtsi index 54fd522badfc..d584da314500 100644 --- a/arch/arm/boot/dts/tango4-common.dtsi +++ b/arch/arm/boot/dts/tango4-common.dtsi @@ -51,7 +51,7 @@ }; }; - l2cc: l2-cache-controller@20100000 { + l2cc: cache-controller@20100000 { compatible = "arm,pl310-cache"; reg = <0x20100000 0x1000>; cache-level = <2>; diff --git a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts index 2d683c9a1a5d..a0b829738e8f 100644 --- a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts +++ b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts @@ -14,6 +14,10 @@ compatible = "acer,picasso", "nvidia,tegra20"; aliases { + mmc0 = &sdmmc4; /* eMMC */ + mmc1 = &sdmmc3; /* MicroSD */ + mmc2 = &sdmmc1; /* WiFi */ + rtc0 = &pmic; rtc1 = "/rtc@7000e000"; @@ -314,16 +318,24 @@ nvidia,pins = "drive_ddc", "drive_vi1", "drive_sdio1"; + nvidia,pull-up-strength = <31>; + nvidia,pull-down-strength = <31>; nvidia,schmitt = <TEGRA_PIN_ENABLE>; - nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_4>; + nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>; + nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>; }; drive_dbg { nvidia,pins = "drive_dbg", "drive_vi2", "drive_at1", "drive_ao1"; + nvidia,pull-up-strength = <31>; + nvidia,pull-down-strength = <31>; nvidia,schmitt = <TEGRA_PIN_ENABLE>; - nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_4>; + nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>; + nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>; }; @@ -431,8 +443,6 @@ compatible = "atmel,maxtouch"; reg = <0x4c>; - atmel,cfg_name = "maxtouch-acer-iconia-tab-a500.cfg"; - interrupt-parent = <&gpio>; interrupts = <TEGRA_GPIO(V, 6) IRQ_TYPE_LEVEL_LOW>; @@ -720,13 +730,17 @@ power-off-delay-us = <300>; }; - mmc@c8000000 { + sdmmc1: mmc@c8000000 { status = "okay"; #address-cells = <1>; #size-cells = <0>; - max-frequency = <25000000>; + assigned-clocks = <&tegra_car TEGRA20_CLK_SDMMC1>; + assigned-clock-parents = <&tegra_car TEGRA20_CLK_PLL_C>; + assigned-clock-rates = <50000000>; + + max-frequency = <50000000>; keep-power-in-suspend; bus-width = <4>; non-removable; @@ -745,7 +759,7 @@ }; }; - mmc@c8000400 { + sdmmc3: mmc@c8000400 { status = "okay"; bus-width = <4>; cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; @@ -754,7 +768,7 @@ vqmmc-supply = <&vdd_3v3_sys>; }; - mmc@c8000600 { + sdmmc4: mmc@c8000600 { status = "okay"; bus-width = <8>; vmmc-supply = <&vcore_emmc>; diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi index 3922517145e7..88ca03f57b3b 100644 --- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi +++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi @@ -2,6 +2,7 @@ #include <dt-bindings/input/gpio-keys.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/power/summit,smb347-charger.h> #include <dt-bindings/thermal/thermal.h> #include "tegra30.dtsi" @@ -10,6 +11,9 @@ / { aliases { + mmc0 = &sdmmc4; /* eMMC */ + mmc1 = &sdmmc3; /* WiFi */ + rtc0 = &pmic; rtc1 = "/rtc@7000e000"; @@ -836,6 +840,24 @@ i2c@7000c400 { clock-frequency = <400000>; status = "okay"; + + touchscreen@10 { + compatible ="elan,ektf3624"; + reg = <0x10>; + + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&gpio TEGRA_GPIO(H, 6) GPIO_ACTIVE_LOW>; + + vcc33-supply = <&vcc_3v3_ts>; + vccio-supply = <&vcc_3v3_ts>; + + touchscreen-size-x = <2112>; + touchscreen-size-y = <1280>; + touchscreen-swapped-x-y; + touchscreen-inverted-x; + }; }; i2c@7000c500 { @@ -901,9 +923,24 @@ #thermal-sensor-cells = <1>; }; - battery@55 { + fuel-gauge@55 { compatible = "ti,bq27541"; reg = <0x55>; + power-supplies = <&power_supply>; + monitored-battery = <&battery_cell>; + }; + + power_supply: charger@6a { + compatible = "summit,smb347"; + reg = <0x6a>; + + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(V, 1) IRQ_TYPE_EDGE_BOTH>; + + summit,enable-charge-control = <SMB3XX_CHG_ENABLE_PIN_ACTIVE_LOW>; + summit,enable-usb-charging; + + monitored-battery = <&battery_cell>; }; }; @@ -936,12 +973,17 @@ power-off-delay-us = <300>; }; - mmc@78000400 { + sdmmc3: mmc@78000400 { status = "okay"; #address-cells = <1>; #size-cells = <0>; + assigned-clocks = <&tegra_car TEGRA30_CLK_SDMMC3>; + assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_C>; + assigned-clock-rates = <50000000>; + + max-frequency = <50000000>; keep-power-in-suspend; bus-width = <4>; non-removable; @@ -960,7 +1002,7 @@ }; }; - mmc@78000600 { + sdmmc4: mmc@78000600 { status = "okay"; bus-width = <8>; vmmc-supply = <&vcore_emmc>; @@ -993,6 +1035,12 @@ default-brightness-level = <15>; }; + battery_cell: battery-cell { + compatible = "simple-battery"; + constant-charge-current-max-microamp = <1800000>; + operating-range-celsius = <0 45>; + }; + /* PMIC has a built-in 32KHz oscillator which is used by PMC */ clk32k_in: clock@0 { compatible = "fixed-clock"; diff --git a/arch/arm/boot/dts/tny_a9260_common.dtsi b/arch/arm/boot/dts/tny_a9260_common.dtsi index dd6957b20772..70e5635c78ed 100644 --- a/arch/arm/boot/dts/tny_a9260_common.dtsi +++ b/arch/arm/boot/dts/tny_a9260_common.dtsi @@ -10,7 +10,7 @@ bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock6 rw rootfstype=ubifs"; }; - memory { + memory@20000000 { reg = <0x20000000 0x4000000>; }; diff --git a/arch/arm/boot/dts/tny_a9263.dts b/arch/arm/boot/dts/tny_a9263.dts index 2820635952e3..62b7d9f9a926 100644 --- a/arch/arm/boot/dts/tny_a9263.dts +++ b/arch/arm/boot/dts/tny_a9263.dts @@ -15,7 +15,7 @@ bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs"; }; - memory { + memory@20000000 { reg = <0x20000000 0x4000000>; }; diff --git a/arch/arm/boot/dts/usb_a9260.dts b/arch/arm/boot/dts/usb_a9260.dts index ec8cd86b260d..6cfa83921ac2 100644 --- a/arch/arm/boot/dts/usb_a9260.dts +++ b/arch/arm/boot/dts/usb_a9260.dts @@ -16,7 +16,7 @@ bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs"; }; - memory { + memory@20000000 { reg = <0x20000000 0x4000000>; }; diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts index e7a705fddda9..8a0cfbfd0c45 100644 --- a/arch/arm/boot/dts/usb_a9263.dts +++ b/arch/arm/boot/dts/usb_a9263.dts @@ -15,7 +15,7 @@ bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs"; }; - memory { + memory@20000000 { reg = <0x20000000 0x4000000>; }; diff --git a/arch/arm/boot/dts/usb_a9g20_common.dtsi b/arch/arm/boot/dts/usb_a9g20_common.dtsi index adbe75024739..7d10b36db1ee 100644 --- a/arch/arm/boot/dts/usb_a9g20_common.dtsi +++ b/arch/arm/boot/dts/usb_a9g20_common.dtsi @@ -14,7 +14,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@20000000 { reg = <0x20000000 0x4000000>; }; diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index a88ee5294d35..4f7220b11f2d 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -280,7 +280,7 @@ reg = <0x0f0000 0x1000>; interrupts = <0>; clocks = <&v2m_refclk32khz>, <&smbclk>; - clock-names = "wdogclk", "apb_pclk"; + clock-names = "wdog_clk", "apb_pclk"; }; v2m_timer01: timer@110000 { diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi index 5e48b641068a..2ac41ed3a57c 100644 --- a/arch/arm/boot/dts/vexpress-v2m.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi @@ -198,7 +198,7 @@ reg = <0x0f000 0x1000>; interrupts = <0>; clocks = <&v2m_refclk32khz>, <&smbclk>; - clock-names = "wdogclk", "apb_pclk"; + clock-names = "wdog_clk", "apb_pclk"; }; v2m_timer01: timer@11000 { diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts index f82fa34c90be..e63c5c0bfb43 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts @@ -87,8 +87,8 @@ status = "disabled"; reg = <0 0x2b060000 0 0x1000>; interrupts = <0 98 4>; - clocks = <&sys_pll>; - clock-names = "apb_pclk"; + clocks = <&sys_pll>, <&sys_pll>; + clock-names = "wdog_clk", "apb_pclk"; }; gic: interrupt-controller@2c001000 { diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index 3ac95a179452..012d40a7228c 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -128,7 +128,7 @@ reg = <0 0x2a490000 0 0x1000>; interrupts = <0 98 4>; clocks = <&oscclk6a>, <&oscclk6a>; - clock-names = "wdogclk", "apb_pclk"; + clock-names = "wdog_clk", "apb_pclk"; }; hdlcd@2b000000 { diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts index 623246f37448..4c5847955856 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts @@ -122,8 +122,8 @@ reg = <0x100e4000 0x1000>; interrupts = <0 48 4>, <0 49 4>; - clocks = <&oscclk2>, <&oscclk2>; - clock-names = "timclk", "apb_pclk"; + clocks = <&oscclk2>, <&oscclk2>, <&oscclk2>; + clock-names = "timer0clk", "timer1clk", "apb_pclk"; status = "disabled"; }; @@ -132,7 +132,7 @@ reg = <0x100e5000 0x1000>; interrupts = <0 51 4>; clocks = <&oscclk2>, <&oscclk2>; - clock-names = "wdogclk", "apb_pclk"; + clock-names = "wdog_clk", "apb_pclk"; }; scu@1e000000 { diff --git a/arch/arm/boot/dts/vf610-zii-cfu1.dts b/arch/arm/boot/dts/vf610-zii-cfu1.dts index 64e0e9509226..96495d965163 100644 --- a/arch/arm/boot/dts/vf610-zii-cfu1.dts +++ b/arch/arm/boot/dts/vf610-zii-cfu1.dts @@ -172,7 +172,6 @@ interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <2>; - reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; ports { #address-cells = <1>; @@ -226,6 +225,7 @@ compatible = "nxp,pca9554"; reg = <0x22>; gpio-controller; + #gpio-cells = <2>; }; lm75@48 { @@ -356,7 +356,6 @@ pinctrl_switch: switch-grp { fsl,pins = < VF610_PAD_PTB28__GPIO_98 0x3061 - VF610_PAD_PTE2__GPIO_107 0x1042 >; }; diff --git a/arch/arm/boot/dts/vf610-zii-spb4.dts b/arch/arm/boot/dts/vf610-zii-spb4.dts index 9e5187ba3fa6..6c6ec46fd015 100644 --- a/arch/arm/boot/dts/vf610-zii-spb4.dts +++ b/arch/arm/boot/dts/vf610-zii-spb4.dts @@ -129,7 +129,6 @@ pinctrl-names = "default"; reg = <0>; eeprom-length = <65536>; - reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; interrupt-parent = <&gpio3>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; @@ -326,7 +325,6 @@ pinctrl_gpio_switch0: pinctrl-gpio-switch0 { fsl,pins = < - VF610_PAD_PTE2__GPIO_107 0x31c2 VF610_PAD_PTB28__GPIO_98 0x219d >; }; diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts index 569614b08f04..73fdace4cb42 100644 --- a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts +++ b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts @@ -118,7 +118,6 @@ pinctrl-names = "default"; reg = <0>; eeprom-length = <65536>; - reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; interrupt-parent = <&gpio3>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; @@ -293,7 +292,6 @@ pinctrl_gpio_switch0: pinctrl-gpio-switch0 { fsl,pins = < - VF610_PAD_PTE2__GPIO_107 0x31c2 VF610_PAD_PTB28__GPIO_98 0x219d >; }; diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts index b6b0f302b7b4..fe600ab2e4bd 100644 --- a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts +++ b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts @@ -143,7 +143,6 @@ pinctrl-names = "default"; reg = <0>; eeprom-length = <65536>; - reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; interrupt-parent = <&gpio3>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; @@ -333,7 +332,6 @@ pinctrl_gpio_switch0: pinctrl-gpio-switch0 { fsl,pins = < - VF610_PAD_PTE2__GPIO_107 0x31c2 VF610_PAD_PTB28__GPIO_98 0x219d >; }; diff --git a/arch/arm/boot/dts/zx296702.dtsi b/arch/arm/boot/dts/zx296702.dtsi index afd98de029be..f378c661b3bf 100644 --- a/arch/arm/boot/dts/zx296702.dtsi +++ b/arch/arm/boot/dts/zx296702.dtsi @@ -58,7 +58,7 @@ clocks = <&topclk ZX296702_A9_PERIPHCLK>; }; - l2cc: l2-cache-controller@c00000 { + l2cc: cache-controller@c00000 { compatible = "arm,pl310-cache"; reg = <0x00c00000 0x1000>; cache-unified; |