diff options
Diffstat (limited to 'arch/arm/mach-gemini')
-rw-r--r-- | arch/arm/mach-gemini/Kconfig | 21 | ||||
-rw-r--r-- | arch/arm/mach-gemini/Makefile | 3 | ||||
-rw-r--r-- | arch/arm/mach-gemini/board-nas4220b.c | 111 | ||||
-rw-r--r-- | arch/arm/mach-gemini/board-wbd111.c | 143 | ||||
-rw-r--r-- | arch/arm/mach-gemini/board-wbd222.c | 143 |
5 files changed, 421 insertions, 0 deletions
diff --git a/arch/arm/mach-gemini/Kconfig b/arch/arm/mach-gemini/Kconfig index 515b75cf2e8b..6f066ee4bf24 100644 --- a/arch/arm/mach-gemini/Kconfig +++ b/arch/arm/mach-gemini/Kconfig @@ -2,6 +2,13 @@ if ARCH_GEMINI menu "Cortina Systems Gemini Implementations" +config MACH_NAS4220B + bool "Raidsonic NAS-4220-B" + select GEMINI_MEM_SWAP + help + Say Y here if you intend to run this kernel on a + Raidsonic NAS-4220-B. + config MACH_RUT100 bool "Teltonika RUT100" select GEMINI_MEM_SWAP @@ -9,6 +16,20 @@ config MACH_RUT100 Say Y here if you intend to run this kernel on a Teltonika 3G Router RUT100. +config MACH_WBD111 + bool "Wiliboard WBD-111" + select GEMINI_MEM_SWAP + help + Say Y here if you intend to run this kernel on a + Wiliboard WBD-111. + +config MACH_WBD222 + bool "Wiliboard WBD-222" + select GEMINI_MEM_SWAP + help + Say Y here if you intend to run this kernel on a + Wiliboard WBD-222. + endmenu config GEMINI_MEM_SWAP diff --git a/arch/arm/mach-gemini/Makefile b/arch/arm/mach-gemini/Makefile index 719505b81821..c5b24b95a76e 100644 --- a/arch/arm/mach-gemini/Makefile +++ b/arch/arm/mach-gemini/Makefile @@ -7,4 +7,7 @@ obj-y := irq.o mm.o time.o devices.o gpio.o # Board-specific support +obj-$(CONFIG_MACH_NAS4220B) += board-nas4220b.o obj-$(CONFIG_MACH_RUT100) += board-rut1xx.o +obj-$(CONFIG_MACH_WBD111) += board-wbd111.o +obj-$(CONFIG_MACH_WBD222) += board-wbd222.o diff --git a/arch/arm/mach-gemini/board-nas4220b.c b/arch/arm/mach-gemini/board-nas4220b.c new file mode 100644 index 000000000000..01f1d6daab44 --- /dev/null +++ b/arch/arm/mach-gemini/board-nas4220b.c @@ -0,0 +1,111 @@ +/* + * Support for Raidsonic NAS-4220-B + * + * Copyright (C) 2009 Janos Laube <janos.dev@gmail.com> + * + * based on rut1xx.c + * Copyright (C) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/input.h> +#include <linux/gpio_keys.h> +#include <linux/mdio-gpio.h> +#include <linux/io.h> + +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> + +#include <mach/hardware.h> +#include <mach/global_reg.h> + +#include "common.h" + +static struct sys_timer ib4220b_timer = { + .init = gemini_timer_init, +}; + +static struct gpio_led ib4220b_leds[] = { + { + .name = "nas4220b:orange:hdd", + .default_trigger = "none", + .gpio = 60, + }, + { + .name = "nas4220b:green:os", + .default_trigger = "heartbeat", + .gpio = 62, + }, +}; + +static struct gpio_led_platform_data ib4220b_leds_data = { + .num_leds = ARRAY_SIZE(ib4220b_leds), + .leds = ib4220b_leds, +}; + +static struct platform_device ib4220b_led_device = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &ib4220b_leds_data, + }, +}; + +static struct gpio_keys_button ib4220b_keys[] = { + { + .code = KEY_SETUP, + .gpio = 61, + .active_low = 1, + .desc = "Backup Button", + .type = EV_KEY, + }, + { + .code = KEY_RESTART, + .gpio = 63, + .active_low = 1, + .desc = "Softreset Button", + .type = EV_KEY, + }, +}; + +static struct gpio_keys_platform_data ib4220b_keys_data = { + .buttons = ib4220b_keys, + .nbuttons = ARRAY_SIZE(ib4220b_keys), +}; + +static struct platform_device ib4220b_key_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &ib4220b_keys_data, + }, +}; + +static void __init ib4220b_init(void) +{ + gemini_gpio_init(); + platform_register_uart(); + platform_register_pflash(SZ_16M, NULL, 0); + platform_device_register(&ib4220b_led_device); + platform_device_register(&ib4220b_key_device); +} + +MACHINE_START(NAS4220B, "Raidsonic NAS IB-4220-B") + .phys_io = 0x7fffc000, + .io_pg_offst = ((0xffffc000) >> 18) & 0xfffc, + .boot_params = 0x100, + .map_io = gemini_map_io, + .init_irq = gemini_init_irq, + .timer = &ib4220b_timer, + .init_machine = ib4220b_init, +MACHINE_END diff --git a/arch/arm/mach-gemini/board-wbd111.c b/arch/arm/mach-gemini/board-wbd111.c new file mode 100644 index 000000000000..36538c15b3c4 --- /dev/null +++ b/arch/arm/mach-gemini/board-wbd111.c @@ -0,0 +1,143 @@ +/* + * Support for Wiliboard WBD-111 + * + * Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/input.h> +#include <linux/skbuff.h> +#include <linux/gpio_keys.h> +#include <linux/mdio-gpio.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> + + +#include "common.h" + +static struct gpio_keys_button wbd111_keys[] = { + { + .code = KEY_SETUP, + .gpio = 5, + .active_low = 1, + .desc = "reset", + .type = EV_KEY, + }, +}; + +static struct gpio_keys_platform_data wbd111_keys_data = { + .buttons = wbd111_keys, + .nbuttons = ARRAY_SIZE(wbd111_keys), +}; + +static struct platform_device wbd111_keys_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &wbd111_keys_data, + }, +}; + +static struct gpio_led wbd111_leds[] = { + { + .name = "L3red", + .gpio = 1, + }, + { + .name = "L4green", + .gpio = 2, + }, + { + .name = "L4red", + .gpio = 3, + }, + { + .name = "L3green", + .gpio = 5, + }, +}; + +static struct gpio_led_platform_data wbd111_leds_data = { + .num_leds = ARRAY_SIZE(wbd111_leds), + .leds = wbd111_leds, +}; + +static struct platform_device wbd111_leds_device = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &wbd111_leds_data, + }, +}; + +static struct sys_timer wbd111_timer = { + .init = gemini_timer_init, +}; + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition wbd111_partitions[] = { + { + .name = "RedBoot", + .offset = 0, + .size = 0x020000, + .mask_flags = MTD_WRITEABLE, + } , { + .name = "kernel", + .offset = 0x020000, + .size = 0x100000, + } , { + .name = "rootfs", + .offset = 0x120000, + .size = 0x6a0000, + } , { + .name = "VCTL", + .offset = 0x7c0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + } , { + .name = "cfg", + .offset = 0x7d0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + } , { + .name = "FIS", + .offset = 0x7e0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + } +}; +#define wbd111_num_partitions ARRAY_SIZE(wbd111_partitions) +#else +#define wbd111_partitions NULL +#define wbd111_num_partitions 0 +#endif /* CONFIG_MTD_PARTITIONS */ + +static void __init wbd111_init(void) +{ + gemini_gpio_init(); + platform_register_uart(); + platform_register_pflash(SZ_8M, wbd111_partitions, + wbd111_num_partitions); + platform_device_register(&wbd111_leds_device); + platform_device_register(&wbd111_keys_device); +} + +MACHINE_START(WBD111, "Wiliboard WBD-111") + .phys_io = 0x7fffc000, + .io_pg_offst = ((0xffffc000) >> 18) & 0xfffc, + .boot_params = 0x100, + .map_io = gemini_map_io, + .init_irq = gemini_init_irq, + .timer = &wbd111_timer, + .init_machine = wbd111_init, +MACHINE_END diff --git a/arch/arm/mach-gemini/board-wbd222.c b/arch/arm/mach-gemini/board-wbd222.c new file mode 100644 index 000000000000..ece8b4c65110 --- /dev/null +++ b/arch/arm/mach-gemini/board-wbd222.c @@ -0,0 +1,143 @@ +/* + * Support for Wiliboard WBD-222 + * + * Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/input.h> +#include <linux/skbuff.h> +#include <linux/gpio_keys.h> +#include <linux/mdio-gpio.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> + + +#include "common.h" + +static struct gpio_keys_button wbd222_keys[] = { + { + .code = KEY_SETUP, + .gpio = 5, + .active_low = 1, + .desc = "reset", + .type = EV_KEY, + }, +}; + +static struct gpio_keys_platform_data wbd222_keys_data = { + .buttons = wbd222_keys, + .nbuttons = ARRAY_SIZE(wbd222_keys), +}; + +static struct platform_device wbd222_keys_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &wbd222_keys_data, + }, +}; + +static struct gpio_led wbd222_leds[] = { + { + .name = "L3red", + .gpio = 1, + }, + { + .name = "L4green", + .gpio = 2, + }, + { + .name = "L4red", + .gpio = 3, + }, + { + .name = "L3green", + .gpio = 5, + }, +}; + +static struct gpio_led_platform_data wbd222_leds_data = { + .num_leds = ARRAY_SIZE(wbd222_leds), + .leds = wbd222_leds, +}; + +static struct platform_device wbd222_leds_device = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &wbd222_leds_data, + }, +}; + +static struct sys_timer wbd222_timer = { + .init = gemini_timer_init, +}; + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition wbd222_partitions[] = { + { + .name = "RedBoot", + .offset = 0, + .size = 0x020000, + .mask_flags = MTD_WRITEABLE, + } , { + .name = "kernel", + .offset = 0x020000, + .size = 0x100000, + } , { + .name = "rootfs", + .offset = 0x120000, + .size = 0x6a0000, + } , { + .name = "VCTL", + .offset = 0x7c0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + } , { + .name = "cfg", + .offset = 0x7d0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + } , { + .name = "FIS", + .offset = 0x7e0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + } +}; +#define wbd222_num_partitions ARRAY_SIZE(wbd222_partitions) +#else +#define wbd222_partitions NULL +#define wbd222_num_partitions 0 +#endif /* CONFIG_MTD_PARTITIONS */ + +static void __init wbd222_init(void) +{ + gemini_gpio_init(); + platform_register_uart(); + platform_register_pflash(SZ_8M, wbd222_partitions, + wbd222_num_partitions); + platform_device_register(&wbd222_leds_device); + platform_device_register(&wbd222_keys_device); +} + +MACHINE_START(WBD222, "Wiliboard WBD-222") + .phys_io = 0x7fffc000, + .io_pg_offst = ((0xffffc000) >> 18) & 0xfffc, + .boot_params = 0x100, + .map_io = gemini_map_io, + .init_irq = gemini_init_irq, + .timer = &wbd222_timer, + .init_machine = wbd222_init, +MACHINE_END |