diff options
Diffstat (limited to 'arch/arm/mach-kirkwood')
| -rw-r--r-- | arch/arm/mach-kirkwood/Kconfig | 6 | ||||
| -rw-r--r-- | arch/arm/mach-kirkwood/Makefile | 3 | ||||
| -rw-r--r-- | arch/arm/mach-kirkwood/addr-map.c | 14 | ||||
| -rw-r--r-- | arch/arm/mach-kirkwood/common.c | 159 | ||||
| -rw-r--r-- | arch/arm/mach-kirkwood/common.h | 4 | ||||
| -rw-r--r-- | arch/arm/mach-kirkwood/cpuidle.c | 96 | ||||
| -rw-r--r-- | arch/arm/mach-kirkwood/db88f6281-bp-setup.c | 31 | ||||
| -rw-r--r-- | arch/arm/mach-kirkwood/include/mach/bridge-regs.h | 21 | ||||
| -rw-r--r-- | arch/arm/mach-kirkwood/include/mach/io.h | 25 | ||||
| -rw-r--r-- | arch/arm/mach-kirkwood/include/mach/kirkwood.h | 18 | ||||
| -rw-r--r-- | arch/arm/mach-kirkwood/mpp.c | 3 | ||||
| -rw-r--r-- | arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c | 173 | ||||
| -rw-r--r-- | arch/arm/mach-kirkwood/pcie.c | 4 | ||||
| -rw-r--r-- | arch/arm/mach-kirkwood/rd88f6192-nas-setup.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-kirkwood/rd88f6281-setup.c | 31 | ||||
| -rw-r--r-- | arch/arm/mach-kirkwood/sheevaplug-setup.c | 32 |
16 files changed, 519 insertions, 103 deletions
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index b5421cccd7e1..25100f7acf4c 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -20,6 +20,12 @@ config MACH_RD88F6281 Say 'Y' here if you want your kernel to support the Marvell RD-88F6281 Reference Board. +config MACH_MV88F6281GTW_GE + bool "Marvell 88F6281 GTW GE Board" + help + Say 'Y' here if you want your kernel to support the + Marvell 88F6281 GTW GE Board. + config MACH_SHEEVAPLUG bool "Marvell SheevaPlug Reference Board" help diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index 8f03c9b9bdd9..9dd680e964d6 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -3,5 +3,8 @@ obj-y += common.o addr-map.o irq.o pcie.o mpp.o obj-$(CONFIG_MACH_DB88F6281_BP) += db88f6281-bp-setup.o obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o +obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o obj-$(CONFIG_MACH_TS219) += ts219-setup.o + +obj-$(CONFIG_CPU_IDLE) += cpuidle.o diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c index 5db4f0bbe5ee..1da5d1c18ecb 100644 --- a/arch/arm/mach-kirkwood/addr-map.c +++ b/arch/arm/mach-kirkwood/addr-map.c @@ -20,6 +20,7 @@ */ #define TARGET_DDR 0 #define TARGET_DEV_BUS 1 +#define TARGET_SRAM 3 #define TARGET_PCIE 4 #define ATTR_DEV_SPI_ROM 0x1e #define ATTR_DEV_BOOT 0x1d @@ -30,6 +31,7 @@ #define ATTR_DEV_CS0 0x3e #define ATTR_PCIE_IO 0xe0 #define ATTR_PCIE_MEM 0xe8 +#define ATTR_SRAM 0x01 /* * Helpers to get DDR bank info @@ -48,7 +50,6 @@ struct mbus_dram_target_info kirkwood_mbus_dram_info; -static int __initdata win_alloc_count; static int __init cpu_win_can_remap(int win) { @@ -112,7 +113,11 @@ void __init kirkwood_setup_cpu_mbus(void) setup_cpu_win(2, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE, TARGET_DEV_BUS, ATTR_DEV_NAND, -1); - win_alloc_count = 3; + /* + * Setup window for SRAM. + */ + setup_cpu_win(3, KIRKWOOD_SRAM_PHYS_BASE, KIRKWOOD_SRAM_SIZE, + TARGET_SRAM, ATTR_SRAM, -1); /* * Setup MBUS dram target info. @@ -140,8 +145,3 @@ void __init kirkwood_setup_cpu_mbus(void) } kirkwood_mbus_dram_info.num_cs = cs; } - -void __init kirkwood_setup_sram_win(u32 base, u32 size) -{ - setup_cpu_win(win_alloc_count++, base, size, 0x03, 0x00, -1); -} diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index be1ca28fed3f..0f6919838011 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -16,6 +16,7 @@ #include <linux/mv643xx_eth.h> #include <linux/mv643xx_i2c.h> #include <linux/ata_platform.h> +#include <linux/mtd/nand.h> #include <linux/spi/orion_spi.h> #include <net/dsa.h> #include <asm/page.h> @@ -29,6 +30,7 @@ #include <plat/mvsdio.h> #include <plat/mv_xor.h> #include <plat/orion_nand.h> +#include <plat/orion_wdt.h> #include <plat/time.h> #include "common.h" @@ -54,6 +56,13 @@ void __init kirkwood_map_io(void) iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc)); } +/* + * Default clock control bits. Any bit _not_ set in this variable + * will be cleared from the hardware after platform devices have been + * registered. Some reserved bits must be set to 1. + */ +unsigned int kirkwood_clk_ctrl = CGC_DUNIT | CGC_RESERVED; + /***************************************************************************** * EHCI @@ -95,6 +104,7 @@ static struct platform_device kirkwood_ehci = { void __init kirkwood_ehci_init(void) { + kirkwood_clk_ctrl |= CGC_USB0; platform_device_register(&kirkwood_ehci); } @@ -151,6 +161,7 @@ static struct platform_device kirkwood_ge00 = { void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data) { + kirkwood_clk_ctrl |= CGC_GE0; eth_data->shared = &kirkwood_ge00_shared; kirkwood_ge00.dev.platform_data = eth_data; @@ -212,6 +223,7 @@ static struct platform_device kirkwood_ge01 = { void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data) { + kirkwood_clk_ctrl |= CGC_GE1; eth_data->shared = &kirkwood_ge01_shared; kirkwood_ge01.dev.platform_data = eth_data; @@ -258,6 +270,43 @@ void __init kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq) /***************************************************************************** + * NAND flash + ****************************************************************************/ +static struct resource kirkwood_nand_resource = { + .flags = IORESOURCE_MEM, + .start = KIRKWOOD_NAND_MEM_PHYS_BASE, + .end = KIRKWOOD_NAND_MEM_PHYS_BASE + + KIRKWOOD_NAND_MEM_SIZE - 1, +}; + +static struct orion_nand_data kirkwood_nand_data = { + .cle = 0, + .ale = 1, + .width = 8, +}; + +static struct platform_device kirkwood_nand_flash = { + .name = "orion_nand", + .id = -1, + .dev = { + .platform_data = &kirkwood_nand_data, + }, + .resource = &kirkwood_nand_resource, + .num_resources = 1, +}; + +void __init kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, + int chip_delay) +{ + kirkwood_clk_ctrl |= CGC_RUNIT; + kirkwood_nand_data.parts = parts; + kirkwood_nand_data.nr_parts = nr_parts; + kirkwood_nand_data.chip_delay = chip_delay; + platform_device_register(&kirkwood_nand_flash); +} + + +/***************************************************************************** * SoC RTC ****************************************************************************/ static struct resource kirkwood_rtc_resource = { @@ -301,6 +350,9 @@ static struct platform_device kirkwood_sata = { void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data) { + kirkwood_clk_ctrl |= CGC_SATA0; + if (sata_data->n_ports > 1) + kirkwood_clk_ctrl |= CGC_SATA1; sata_data->dram = &kirkwood_mbus_dram_info; kirkwood_sata.dev.platform_data = sata_data; platform_device_register(&kirkwood_sata); @@ -346,6 +398,7 @@ void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data) else mvsdio_data->clock = 200000000; mvsdio_data->dram = &kirkwood_mbus_dram_info; + kirkwood_clk_ctrl |= CGC_SDIO; kirkwood_sdio.dev.platform_data = mvsdio_data; platform_device_register(&kirkwood_sdio); } @@ -377,6 +430,7 @@ static struct platform_device kirkwood_spi = { void __init kirkwood_spi_init() { + kirkwood_clk_ctrl |= CGC_RUNIT; platform_device_register(&kirkwood_spi); } @@ -507,6 +561,43 @@ void __init kirkwood_uart1_init(void) /***************************************************************************** + * Cryptographic Engines and Security Accelerator (CESA) + ****************************************************************************/ + +static struct resource kirkwood_crypto_res[] = { + { + .name = "regs", + .start = CRYPTO_PHYS_BASE, + .end = CRYPTO_PHYS_BASE + 0xffff, + .flags = IORESOURCE_MEM, + }, { + .name = "sram", + .start = KIRKWOOD_SRAM_PHYS_BASE, + .end = KIRKWOOD_SRAM_PHYS_BASE + KIRKWOOD_SRAM_SIZE - 1, + .flags = IORESOURCE_MEM, + }, { + .name = "crypto interrupt", + .start = IRQ_KIRKWOOD_CRYPTO, + .end = IRQ_KIRKWOOD_CRYPTO, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device kirkwood_crypto_device = { + .name = "mv_crypto", + .id = -1, + .num_resources = ARRAY_SIZE(kirkwood_crypto_res), + .resource = kirkwood_crypto_res, +}; + +void __init kirkwood_crypto_init(void) +{ + kirkwood_clk_ctrl |= CGC_CRYPTO; + platform_device_register(&kirkwood_crypto_device); +} + + +/***************************************************************************** * XOR ****************************************************************************/ static struct mv_xor_platform_shared_data kirkwood_xor_shared_data = { @@ -597,6 +688,7 @@ static struct platform_device kirkwood_xor01_channel = { static void __init kirkwood_xor0_init(void) { + kirkwood_clk_ctrl |= CGC_XOR0; platform_device_register(&kirkwood_xor0_shared); /* @@ -695,6 +787,7 @@ static struct platform_device kirkwood_xor11_channel = { static void __init kirkwood_xor1_init(void) { + kirkwood_clk_ctrl |= CGC_XOR1; platform_device_register(&kirkwood_xor1_shared); /* @@ -713,6 +806,29 @@ static void __init kirkwood_xor1_init(void) /***************************************************************************** + * Watchdog + ****************************************************************************/ +static struct orion_wdt_platform_data kirkwood_wdt_data = { + .tclk = 0, +}; + +static struct platform_device kirkwood_wdt_device = { + .name = "orion_wdt", + .id = -1, + .dev = { + .platform_data = &kirkwood_wdt_data, + }, + .num_resources = 0, +}; + +static void __init kirkwood_wdt_init(void) +{ + kirkwood_wdt_data.tclk = kirkwood_tclk; + platform_device_register(&kirkwood_wdt_device); +} + + +/***************************************************************************** * Time handling ****************************************************************************/ int kirkwood_tclk; @@ -804,6 +920,49 @@ void __init kirkwood_init(void) /* internal devices that every board has */ kirkwood_rtc_init(); + kirkwood_wdt_init(); kirkwood_xor0_init(); kirkwood_xor1_init(); + kirkwood_crypto_init(); +} + +static int __init kirkwood_clock_gate(void) +{ + unsigned int curr = readl(CLOCK_GATING_CTRL); + + printk(KERN_DEBUG "Gating clock of unused units\n"); + printk(KERN_DEBUG "before: 0x%08x\n", curr); + + /* Make sure those units are accessible */ + writel(curr | CGC_SATA0 | CGC_SATA1 | CGC_PEX0, CLOCK_GATING_CTRL); + + /* For SATA: first shutdown the phy */ + if (!(kirkwood_clk_ctrl & CGC_SATA0)) { + /* Disable PLL and IVREF */ + writel(readl(SATA0_PHY_MODE_2) & ~0xf, SATA0_PHY_MODE_2); + /* Disable PHY */ + writel(readl(SATA0_IF_CTRL) | 0x200, SATA0_IF_CTRL); + } + if (!(kirkwood_clk_ctrl & CGC_SATA1)) { + /* Disable PLL and IVREF */ + writel(readl(SATA1_PHY_MODE_2) & ~0xf, SATA1_PHY_MODE_2); + /* Disable PHY */ + writel(readl(SATA1_IF_CTRL) | 0x200, SATA1_IF_CTRL); + } + + /* For PCIe: first shutdown the phy */ + if (!(kirkwood_clk_ctrl & CGC_PEX0)) { + writel(readl(PCIE_LINK_CTRL) | 0x10, PCIE_LINK_CTRL); + while (1) + if (readl(PCIE_STATUS) & 0x1) + break; + writel(readl(PCIE_LINK_CTRL) & ~0x10, PCIE_LINK_CTRL); + } + + /* Now gate clock the required units */ + writel(kirkwood_clk_ctrl, CLOCK_GATING_CTRL); + printk(KERN_DEBUG " after: 0x%08x\n", readl(CLOCK_GATING_CTRL)); + + return 0; } +late_initcall(kirkwood_clock_gate); diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index 6ee88406f381..d7de43464358 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -15,6 +15,7 @@ struct dsa_platform_data; struct mv643xx_eth_platform_data; struct mv_sata_platform_data; struct mvsdio_platform_data; +struct mtd_partition; /* * Basic Kirkwood init functions used early by machine-setup. @@ -25,7 +26,6 @@ void kirkwood_init_irq(void); extern struct mbus_dram_target_info kirkwood_mbus_dram_info; void kirkwood_setup_cpu_mbus(void); -void kirkwood_setup_sram_win(u32 base, u32 size); void kirkwood_pcie_id(u32 *dev, u32 *rev); @@ -40,9 +40,11 @@ void kirkwood_spi_init(void); void kirkwood_i2c_init(void); void kirkwood_uart0_init(void); void kirkwood_uart1_init(void); +void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay); extern int kirkwood_tclk; extern struct sys_timer kirkwood_timer; +#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) #endif diff --git a/arch/arm/mach-kirkwood/cpuidle.c b/arch/arm/mach-kirkwood/cpuidle.c new file mode 100644 index 000000000000..f68d33f1f396 --- /dev/null +++ b/arch/arm/mach-kirkwood/cpuidle.c @@ -0,0 +1,96 @@ +/* + * arch/arm/mach-kirkwood/cpuidle.c + * + * CPU idle Marvell Kirkwood SoCs + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * The cpu idle uses wait-for-interrupt and DDR self refresh in order + * to implement two idle states - + * #1 wait-for-interrupt + * #2 wait-for-interrupt and DDR self refresh + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/cpuidle.h> +#include <linux/io.h> +#include <asm/proc-fns.h> +#include <mach/kirkwood.h> + +#define KIRKWOOD_MAX_STATES 2 + +static struct cpuidle_driver kirkwood_idle_driver = { + .name = "kirkwood_idle", + .owner = THIS_MODULE, +}; + +static DEFINE_PER_CPU(struct cpuidle_device, kirkwood_cpuidle_device); + +/* Actual code that puts the SoC in different idle states */ +static int kirkwood_enter_idle(struct cpuidle_device *dev, + struct cpuidle_state *state) +{ + struct timeval before, after; + int idle_time; + + local_irq_disable(); + do_gettimeofday(&before); + if (state == &dev->states[0]) + /* Wait for interrupt state */ + cpu_do_idle(); + else if (state == &dev->states[1]) { + /* + * Following write will put DDR in self refresh. + * Note that we have 256 cycles before DDR puts it + * self in self-refresh, so the wait-for-interrupt + * call afterwards won't get the DDR from self refresh + * mode. + */ + writel(0x7, DDR_OPERATION_BASE); + cpu_do_idle(); + } + do_gettimeofday(&after); + local_irq_enable(); + idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC + + (after.tv_usec - before.tv_usec); + return idle_time; +} + +/* Initialize CPU idle by registering the idle states */ +static int kirkwood_init_cpuidle(void) +{ + struct cpuidle_device *device; + + cpuidle_register_driver(&kirkwood_idle_driver); + + device = &per_cpu(kirkwood_cpuidle_device, smp_processor_id()); + device->state_count = KIRKWOOD_MAX_STATES; + + /* Wait for interrupt state */ + device->states[0].enter = kirkwood_enter_idle; + device->states[0].exit_latency = 1; + device->states[0].target_residency = 10000; + device->states[0].flags = CPUIDLE_FLAG_TIME_VALID; + strcpy(device->states[0].name, "WFI"); + strcpy(device->states[0].desc, "Wait for interrupt"); + + /* Wait for interrupt and DDR self refresh state */ + device->states[1].enter = kirkwood_enter_idle; + device->states[1].exit_latency = 10; + device->states[1].target_residency = 10000; + device->states[1].flags = CPUIDLE_FLAG_TIME_VALID; + strcpy(device->states[1].name, "DDR SR"); + strcpy(device->states[1].desc, "WFI and DDR Self Refresh"); + + if (cpuidle_register_device(device)) { + printk(KERN_ERR "kirkwood_init_cpuidle: Failed registering\n"); + return -EIO; + } + return 0; +} + +device_initcall(kirkwood_init_cpuidle); diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c index 5505d5837752..39bdf4bcace9 100644 --- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c +++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c @@ -11,14 +11,12 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/kirkwood.h> -#include <plat/orion_nand.h> #include <plat/mvsdio.h> #include "common.h" #include "mpp.h" @@ -39,32 +37,6 @@ static struct mtd_partition db88f6281_nand_parts[] = { }, }; -static struct resource db88f6281_nand_resource = { - .flags = IORESOURCE_MEM, - .start = KIRKWOOD_NAND_MEM_PHYS_BASE, - .end = KIRKWOOD_NAND_MEM_PHYS_BASE + - KIRKWOOD_NAND_MEM_SIZE - 1, -}; - -static struct orion_nand_data db88f6281_nand_data = { - .parts = db88f6281_nand_parts, - .nr_parts = ARRAY_SIZE(db88f6281_nand_parts), - .cle = 0, - .ale = 1, - .width = 8, - .chip_delay = 25, -}; - -static struct platform_device db88f6281_nand_flash = { - .name = "orion_nand", - .id = -1, - .dev = { - .platform_data = &db88f6281_nand_data, - }, - .resource = &db88f6281_nand_resource, - .num_resources = 1, -}; - static struct mv643xx_eth_platform_data db88f6281_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; @@ -92,13 +64,12 @@ static void __init db88f6281_init(void) kirkwood_init(); kirkwood_mpp_conf(db88f6281_mpp_config); + kirkwood_nand_init(ARRAY_AND_SIZE(db88f6281_nand_parts), 25); kirkwood_ehci_init(); kirkwood_ge00_init(&db88f6281_ge00_data); kirkwood_sata_init(&db88f6281_sata_data); kirkwood_uart0_init(); kirkwood_sdio_init(&db88f6281_mvsdio_data); - - platform_device_register(&db88f6281_nand_flash); } static int __init db88f6281_pci_init(void) diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h index 4f7029f521cc..9e80d9232c83 100644 --- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h +++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h @@ -17,12 +17,15 @@ #define CPU_RESET 0x00000002 #define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) +#define WDT_RESET_OUT_EN 0x00000002 #define SOFT_RESET_OUT_EN 0x00000004 #define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) #define SOFT_RESET 0x00000001 #define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) +#define WDT_INT_REQ 0x0008 + #define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) #define BRIDGE_INT_TIMER0 0x0002 #define BRIDGE_INT_TIMER1 0x0004 @@ -39,4 +42,22 @@ #define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128) #define L2_WRITETHROUGH 0x00000010 +#define CLOCK_GATING_CTRL (BRIDGE_VIRT_BASE | 0x11c) +#define CGC_GE0 (1 << 0) +#define CGC_PEX0 (1 << 2) +#define CGC_USB0 (1 << 3) +#define CGC_SDIO (1 << 4) +#define CGC_TSU (1 << 5) +#define CGC_DUNIT (1 << 6) +#define CGC_RUNIT (1 << 7) +#define CGC_XOR0 (1 << 8) +#define CGC_AUDIO (1 << 9) +#define CGC_SATA0 (1 << 14) +#define CGC_SATA1 (1 << 15) +#define CGC_XOR1 (1 << 16) +#define CGC_CRYPTO (1 << 17) +#define CGC_GE1 (1 << 19) +#define CGC_TDM (1 << 20) +#define CGC_RESERVED ((1 << 18) | (0x6 << 21)) + #endif diff --git a/arch/arm/mach-kirkwood/include/mach/io.h b/arch/arm/mach-kirkwood/include/mach/io.h index be07be0ef522..a643a846d5fb 100644 --- a/arch/arm/mach-kirkwood/include/mach/io.h +++ b/arch/arm/mach-kirkwood/include/mach/io.h @@ -19,6 +19,31 @@ static inline void __iomem *__io(unsigned long addr) + KIRKWOOD_PCIE_IO_VIRT_BASE); } +static inline void __iomem * +__arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype) +{ + void __iomem *retval; + unsigned long offs = paddr - KIRKWOOD_REGS_PHYS_BASE; + if (mtype == MT_DEVICE && size && offs < KIRKWOOD_REGS_SIZE && + size <= KIRKWOOD_REGS_SIZE && offs + size <= KIRKWOOD_REGS_SIZE) { + retval = (void __iomem *)KIRKWOOD_REGS_VIRT_BASE + offs; + } else { + retval = __arm_ioremap(paddr, size, mtype); + } + + return retval; +} + +static inline void +__arch_iounmap(void __iomem *addr) +{ + if (addr < (void __iomem *)KIRKWOOD_REGS_VIRT_BASE || + addr >= (void __iomem *)(KIRKWOOD_REGS_VIRT_BASE + KIRKWOOD_REGS_SIZE)) + __iounmap(addr); +} + +#define __arch_ioremap(p, s, m) __arch_ioremap(p, s, m) +#define __arch_iounmap(a) __arch_iounmap(a) #define __io(a) __io(a) #define __mem_pci(a) (a) diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h index b3e13958821d..07af858814a0 100644 --- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h +++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h @@ -20,16 +20,18 @@ * f1000000 on-chip peripheral registers * f2000000 PCIe I/O space * f3000000 NAND controller address window + * f4000000 Security Accelerator SRAM * * virt phys size * fee00000 f1000000 1M on-chip peripheral registers * fef00000 f2000000 1M PCIe I/O space */ +#define KIRKWOOD_SRAM_PHYS_BASE 0xf4000000 +#define KIRKWOOD_SRAM_SIZE SZ_2K + #define KIRKWOOD_NAND_MEM_PHYS_BASE 0xf3000000 -#define KIRKWOOD_NAND_MEM_SIZE SZ_64K /* 1K is sufficient, but 64K - * is the minimal window size - */ +#define KIRKWOOD_NAND_MEM_SIZE SZ_1K #define KIRKWOOD_PCIE_IO_PHYS_BASE 0xf2000000 #define KIRKWOOD_PCIE_IO_VIRT_BASE 0xfef00000 @@ -48,6 +50,7 @@ */ #define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x00000) #define DDR_WINDOW_CPU_BASE (DDR_VIRT_BASE | 0x1500) +#define DDR_OPERATION_BASE (DDR_VIRT_BASE | 0x1418) #define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x10000) #define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x10000) @@ -63,7 +66,11 @@ #define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000) +#define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x30000) + #define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x40000) +#define PCIE_LINK_CTRL (PCIE_VIRT_BASE | 0x70) +#define PCIE_STATUS (PCIE_VIRT_BASE | 0x1a04) #define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x50000) @@ -80,6 +87,11 @@ #define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x74000) #define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x80000) +#define SATA_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x80000) +#define SATA0_IF_CTRL (SATA_VIRT_BASE | 0x2050) +#define SATA0_PHY_MODE_2 (SATA_VIRT_BASE | 0x2330) +#define SATA1_IF_CTRL (SATA_VIRT_BASE | 0x4050) +#define SATA1_PHY_MODE_2 (SATA_VIRT_BASE | 0x4330) #define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x90000) diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c index 63c44934391a..a5900f64e38c 100644 --- a/arch/arm/mach-kirkwood/mpp.c +++ b/arch/arm/mach-kirkwood/mpp.c @@ -48,6 +48,9 @@ void __init kirkwood_mpp_conf(unsigned int *mpp_list) if (!variant_mask) return; + /* Initialize gpiolib. */ + orion_gpio_init(); + printk(KERN_DEBUG "initial MPP regs:"); for (i = 0; i < MPP_NR_REGS; i++) { mpp_ctrl[i] = readl(MPP_CTRL(i)); diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c new file mode 100644 index 000000000000..0358f45766cb --- /dev/null +++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c @@ -0,0 +1,173 @@ +/* + * arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c + * + * Marvell 88F6281 GTW GE Board Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/pci.h> +#include <linux/irq.h> +#include <linux/mtd/physmap.h> +#include <linux/timer.h> +#include <linux/mv643xx_eth.h> +#include <linux/ethtool.h> +#include <linux/gpio.h> +#include <linux/leds.h> +#include <linux/input.h> +#include <linux/gpio_keys.h> +#include <linux/spi/flash.h> +#include <linux/spi/spi.h> +#include <linux/spi/orion_spi.h> +#include <net/dsa.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/pci.h> +#include <mach/kirkwood.h> +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data mv88f6281gtw_ge_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_NONE, + .speed = SPEED_1000, + .duplex = DUPLEX_FULL, +}; + +static struct dsa_chip_data mv88f6281gtw_ge_switch_chip_data = { + .port_names[0] = "lan1", + .port_names[1] = "lan2", + .port_names[2] = "lan3", + .port_names[3] = "lan4", + .port_names[4] = "wan", + .port_names[5] = "cpu", +}; + +static struct dsa_platform_data mv88f6281gtw_ge_switch_plat_data = { + .nr_chips = 1, + .chip = &mv88f6281gtw_ge_switch_chip_data, +}; + +static const struct flash_platform_data mv88f6281gtw_ge_spi_slave_data = { + .type = "mx25l12805d", +}; + +static struct spi_board_info __initdata mv88f6281gtw_ge_spi_slave_info[] = { + { + .modalias = "m25p80", + .platform_data = &mv88f6281gtw_ge_spi_slave_data, + .irq = -1, + .max_speed_hz = 50000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +static struct gpio_keys_button mv88f6281gtw_ge_button_pins[] = { + { + .code = KEY_RESTART, + .gpio = 47, + .desc = "SWR Button", + .active_low = 1, + }, { + .code = KEY_F1, + .gpio = 46, + .desc = "WPS Button(F1)", + .active_low = 1, + }, +}; + +static struct gpio_keys_platform_data mv88f6281gtw_ge_button_data = { + .buttons = mv88f6281gtw_ge_button_pins, + .nbuttons = ARRAY_SIZE(mv88f6281gtw_ge_button_pins), +}; + +static struct platform_device mv88f6281gtw_ge_buttons = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &mv88f6281gtw_ge_button_data, + }, +}; + +static struct gpio_led mv88f6281gtw_ge_led_pins[] = { + { + .name = "gtw:green:Status", + .gpio = 20, + .active_low = 0, + }, { + .name = "gtw:red:Status", + .gpio = 21, + .active_low = 0, + }, { + .name = "gtw:green:USB", + .gpio = 12, + .active_low = 0, + }, +}; + +static struct gpio_led_platform_data mv88f6281gtw_ge_led_data = { + .leds = mv88f6281gtw_ge_led_pins, + .num_leds = ARRAY_SIZE(mv88f6281gtw_ge_led_pins), +}; + +static struct platform_device mv88f6281gtw_ge_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &mv88f6281gtw_ge_led_data, + }, +}; + +static unsigned int mv88f6281gtw_ge_mpp_config[] __initdata = { + MPP12_GPO, /* Status#_USB pin */ + MPP20_GPIO, /* Status#_GLED pin */ + MPP21_GPIO, /* Status#_RLED pin */ + MPP46_GPIO, /* WPS_Switch pin */ + MPP47_GPIO, /* SW_Init pin */ + 0 +}; + +static void __init mv88f6281gtw_ge_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + kirkwood_mpp_conf(mv88f6281gtw_ge_mpp_config); + + kirkwood_ehci_init(); + kirkwood_ge00_init(&mv88f6281gtw_ge_ge00_data); + kirkwood_ge00_switch_init(&mv88f6281gtw_ge_switch_plat_data, NO_IRQ); + spi_register_board_info(mv88f6281gtw_ge_spi_slave_info, + ARRAY_SIZE(mv88f6281gtw_ge_spi_slave_info)); + kirkwood_spi_init(); + kirkwood_uart0_init(); + platform_device_register(&mv88f6281gtw_ge_leds); + platform_device_register(&mv88f6281gtw_ge_buttons); +} + +static int __init mv88f6281gtw_ge_pci_init(void) +{ + if (machine_is_mv88f6281gtw_ge()) + kirkwood_pcie_init(); + + return 0; +} +subsys_initcall(mv88f6281gtw_ge_pci_init); + +MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board") + /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */ + .phys_io = KIRKWOOD_REGS_PHYS_BASE, + .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .init_machine = mv88f6281gtw_ge_init, + .map_io = kirkwood_map_io, + .init_irq = kirkwood_init_irq, + .timer = &kirkwood_timer, +MACHINE_END diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index 73fccacd1a73..d90b9aae308d 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -14,6 +14,7 @@ #include <asm/irq.h> #include <asm/mach/pci.h> #include <plat/pcie.h> +#include <mach/bridge-regs.h> #include "common.h" @@ -95,6 +96,7 @@ static struct pci_ops pcie_ops = { static int kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) { struct resource *res; + extern unsigned int kirkwood_clk_ctrl; /* * Generic PCIe unit setup. @@ -133,6 +135,8 @@ static int kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) sys->resource[2] = NULL; sys->io_offset = 0; + kirkwood_clk_ctrl |= CGC_PEX0; + return 1; } diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c index 2f0e4ef3db0f..8bf4153d0840 100644 --- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c @@ -11,8 +11,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/partitions.h> #include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> #include <linux/spi/flash.h> diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c index 31e996d65fc4..31708ddbc83e 100644 --- a/arch/arm/mach-kirkwood/rd88f6281-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c @@ -12,7 +12,6 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/irq.h> -#include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> @@ -22,7 +21,6 @@ #include <asm/mach/arch.h> #include <mach/kirkwood.h> #include <plat/mvsdio.h> -#include <plat/orion_nand.h> #include "common.h" #include "mpp.h" @@ -42,32 +40,6 @@ static struct mtd_partition rd88f6281_nand_parts[] = { }, }; -static struct resource rd88f6281_nand_resource = { - .flags = IORESOURCE_MEM, - .start = KIRKWOOD_NAND_MEM_PHYS_BASE, - .end = KIRKWOOD_NAND_MEM_PHYS_BASE + - KIRKWOOD_NAND_MEM_SIZE - 1, -}; - -static struct orion_nand_data rd88f6281_nand_data = { - .parts = rd88f6281_nand_parts, - .nr_parts = ARRAY_SIZE(rd88f6281_nand_parts), - .cle = 0, - .ale = 1, - .width = 8, - .chip_delay = 25, -}; - -static struct platform_device rd88f6281_nand_flash = { - .name = "orion_nand", - .id = -1, - .dev = { - .platform_data = &rd88f6281_nand_data, - }, - .resource = &rd88f6281_nand_resource, - .num_resources = 1, -}; - static struct mv643xx_eth_platform_data rd88f6281_ge00_data = { .phy_addr = MV643XX_ETH_PHY_NONE, .speed = SPEED_1000, @@ -114,6 +86,7 @@ static void __init rd88f6281_init(void) kirkwood_init(); kirkwood_mpp_conf(rd88f6281_mpp_config); + kirkwood_nand_init(ARRAY_AND_SIZE(rd88f6281_nand_parts), 25); kirkwood_ehci_init(); kirkwood_ge00_init(&rd88f6281_ge00_data); @@ -129,8 +102,6 @@ static void __init rd88f6281_init(void) kirkwood_sata_init(&rd88f6281_sata_data); kirkwood_sdio_init(&rd88f6281_mvsdio_data); kirkwood_uart0_init(); - - platform_device_register(&rd88f6281_nand_flash); } static int __init rd88f6281_pci_init(void) diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c index 831e4a56cae1..c7319eeac8bb 100644 --- a/arch/arm/mach-kirkwood/sheevaplug-setup.c +++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c @@ -11,7 +11,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/mv643xx_eth.h> #include <linux/gpio.h> @@ -20,7 +19,6 @@ #include <asm/mach/arch.h> #include <mach/kirkwood.h> #include <plat/mvsdio.h> -#include <plat/orion_nand.h> #include "common.h" #include "mpp.h" @@ -40,38 +38,12 @@ static struct mtd_partition sheevaplug_nand_parts[] = { }, }; -static struct resource sheevaplug_nand_resource = { - .flags = IORESOURCE_MEM, - .start = KIRKWOOD_NAND_MEM_PHYS_BASE, - .end = KIRKWOOD_NAND_MEM_PHYS_BASE + - KIRKWOOD_NAND_MEM_SIZE - 1, -}; - -static struct orion_nand_data sheevaplug_nand_data = { - .parts = sheevaplug_nand_parts, - .nr_parts = ARRAY_SIZE(sheevaplug_nand_parts), - .cle = 0, - .ale = 1, - .width = 8, - .chip_delay = 25, -}; - -static struct platform_device sheevaplug_nand_flash = { - .name = "orion_nand", - .id = -1, - .dev = { - .platform_data = &sheevaplug_nand_data, - }, - .resource = &sheevaplug_nand_resource, - .num_resources = 1, -}; - static struct mv643xx_eth_platform_data sheevaplug_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(0), }; static struct mvsdio_platform_data sheevaplug_mvsdio_data = { - // unfortunately the CD signal has not been connected */ + /* unfortunately the CD signal has not been connected */ }; static struct gpio_led sheevaplug_led_pins[] = { @@ -111,6 +83,7 @@ static void __init sheevaplug_init(void) kirkwood_mpp_conf(sheevaplug_mpp_config); kirkwood_uart0_init(); + kirkwood_nand_init(ARRAY_AND_SIZE(sheevaplug_nand_parts), 25); if (gpio_request(29, "USB Power Enable") != 0 || gpio_direction_output(29, 1) != 0) @@ -120,7 +93,6 @@ static void __init sheevaplug_init(void) kirkwood_ge00_init(&sheevaplug_ge00_data); kirkwood_sdio_init(&sheevaplug_mvsdio_data); - platform_device_register(&sheevaplug_nand_flash); platform_device_register(&sheevaplug_leds); } |