diff options
Diffstat (limited to 'arch/arm/mach-pxa/include')
| -rw-r--r-- | arch/arm/mach-pxa/include/mach/balloon3.h | 75 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/include/mach/colibri.h | 32 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/include/mach/corgi.h | 5 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/include/mach/gumstix.h | 12 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/include/mach/hardware.h | 5 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/include/mach/palm27x.h | 81 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/include/mach/pata_pxa.h | 33 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/include/mach/sharpsl.h | 35 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/include/mach/sharpsl_pm.h | 9 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/include/mach/spitz.h | 2 |
10 files changed, 204 insertions, 85 deletions
diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h index 1a741065045f..eec92e6fd7cf 100644 --- a/arch/arm/mach-pxa/include/mach/balloon3.h +++ b/arch/arm/mach-pxa/include/mach/balloon3.h @@ -26,21 +26,55 @@ enum balloon3_features { #define BALLOON3_FPGA_VIRT (0xf1000000) /* as per balloon2 */ #define BALLOON3_FPGA_LENGTH 0x01000000 -/* FPGA/CPLD registers */ -#define BALLOON3_PCMCIA0_REG (BALLOON3_FPGA_VIRT + 0x00e00008) -/* fixme - same for now */ -#define BALLOON3_PCMCIA1_REG (BALLOON3_FPGA_VIRT + 0x00e00008) -#define BALLOON3_NANDIO_IO_REG (BALLOON3_FPGA_VIRT + 0x00e00000) +/* FPGA / CPLD registers for CF socket */ +#define BALLOON3_CF_STATUS_REG (BALLOON3_FPGA_VIRT + 0x00e00008) +#define BALLOON3_CF_CONTROL_REG (BALLOON3_FPGA_VIRT + 0x00e00008) +/* FPGA / CPLD version register */ +#define BALLOON3_FPGA_VER (BALLOON3_FPGA_VIRT + 0x00e0001c) +/* FPGA / CPLD registers for NAND flash */ +#define BALLOON3_NAND_BASE (PXA_CS4_PHYS + 0x00e00000) +#define BALLOON3_NAND_IO_REG (BALLOON3_FPGA_VIRT + 0x00e00000) +#define BALLOON3_NAND_CONTROL2_REG (BALLOON3_FPGA_VIRT + 0x00e00010) +#define BALLOON3_NAND_STAT_REG (BALLOON3_FPGA_VIRT + 0x00e00010) +#define BALLOON3_NAND_CONTROL_REG (BALLOON3_FPGA_VIRT + 0x00e00014) + /* fpga/cpld interrupt control register */ #define BALLOON3_INT_CONTROL_REG (BALLOON3_FPGA_VIRT + 0x00e0000C) -#define BALLOON3_NANDIO_CTL2_REG (BALLOON3_FPGA_VIRT + 0x00e00010) -#define BALLOON3_NANDIO_CTL_REG (BALLOON3_FPGA_VIRT + 0x00e00014) #define BALLOON3_VERSION_REG (BALLOON3_FPGA_VIRT + 0x00e0001c) #define BALLOON3_SAMOSA_ADDR_REG (BALLOON3_FPGA_VIRT + 0x00c00000) #define BALLOON3_SAMOSA_DATA_REG (BALLOON3_FPGA_VIRT + 0x00c00004) #define BALLOON3_SAMOSA_STATUS_REG (BALLOON3_FPGA_VIRT + 0x00c0001c) +/* CF Status Register bits (read-only) bits */ +#define BALLOON3_CF_nIRQ (1 << 0) +#define BALLOON3_CF_nSTSCHG_BVD1 (1 << 1) + +/* CF Control Set Register bits / CF Control Clear Register bits (write-only) */ +#define BALLOON3_CF_RESET (1 << 0) +#define BALLOON3_CF_ENABLE (1 << 1) +#define BALLOON3_CF_ADD_ENABLE (1 << 2) + +/* CF Interrupt sources */ +#define BALLOON3_BP_CF_NRDY_IRQ BALLOON3_IRQ(0) +#define BALLOON3_BP_NSTSCHG_IRQ BALLOON3_IRQ(1) + +/* NAND Control register */ +#define BALLOON3_NAND_CONTROL_FLWP (1 << 7) +#define BALLOON3_NAND_CONTROL_FLSE (1 << 6) +#define BALLOON3_NAND_CONTROL_FLCE3 (1 << 5) +#define BALLOON3_NAND_CONTROL_FLCE2 (1 << 4) +#define BALLOON3_NAND_CONTROL_FLCE1 (1 << 3) +#define BALLOON3_NAND_CONTROL_FLCE0 (1 << 2) +#define BALLOON3_NAND_CONTROL_FLALE (1 << 1) +#define BALLOON3_NAND_CONTROL_FLCLE (1 << 0) + +/* NAND Status register */ +#define BALLOON3_NAND_STAT_RNB (1 << 0) + +/* NAND Control2 register */ +#define BALLOON3_NAND_CONTROL2_16BIT (1 << 0) + /* GPIOs for irqs */ #define BALLOON3_GPIO_AUX_NIRQ (94) #define BALLOON3_GPIO_CODEC_IRQ (95) @@ -54,20 +88,24 @@ enum balloon3_features { #define BALLOON3_GPIO_S0_CD (105) +/* NAND */ +#define BALLOON3_GPIO_RUN_NAND (102) + +/* PCF8574A Leds */ +#define BALLOON3_PCF_GPIO_BASE 160 +#define BALLOON3_PCF_GPIO_LED0 (BALLOON3_PCF_GPIO_BASE + 0) +#define BALLOON3_PCF_GPIO_LED1 (BALLOON3_PCF_GPIO_BASE + 1) +#define BALLOON3_PCF_GPIO_LED2 (BALLOON3_PCF_GPIO_BASE + 2) +#define BALLOON3_PCF_GPIO_LED3 (BALLOON3_PCF_GPIO_BASE + 3) +#define BALLOON3_PCF_GPIO_LED4 (BALLOON3_PCF_GPIO_BASE + 4) +#define BALLOON3_PCF_GPIO_LED5 (BALLOON3_PCF_GPIO_BASE + 5) +#define BALLOON3_PCF_GPIO_LED6 (BALLOON3_PCF_GPIO_BASE + 6) +#define BALLOON3_PCF_GPIO_LED7 (BALLOON3_PCF_GPIO_BASE + 7) + /* FPGA Interrupt Mask/Acknowledge Register */ #define BALLOON3_INT_S0_IRQ (1 << 0) /* PCMCIA 0 IRQ */ #define BALLOON3_INT_S0_STSCHG (1 << 1) /* PCMCIA 0 status changed */ -/* CF Status Register */ -#define BALLOON3_PCMCIA_nIRQ (1 << 0) /* IRQ / ready signal */ -#define BALLOON3_PCMCIA_nSTSCHG_BVD1 (1 << 1) - /* VDD sense / card status changed */ - -/* CF control register (write) */ -#define BALLOON3_PCMCIA_RESET (1 << 0) /* Card reset signal */ -#define BALLOON3_PCMCIA_ENABLE (1 << 1) -#define BALLOON3_PCMCIA_ADD_ENABLE (1 << 2) - /* CPLD (and FPGA) interface definitions */ #define CPLD_LCD0_DATA_SET 0x00 #define CPLD_LCD0_DATA_CLR 0x10 @@ -132,9 +170,6 @@ enum balloon3_features { /* Balloon3 Interrupts */ #define BALLOON3_IRQ(x) (IRQ_BOARD_START + (x)) -#define BALLOON3_BP_CF_NRDY_IRQ BALLOON3_IRQ(0) -#define BALLOON3_BP_NSTSCHG_IRQ BALLOON3_IRQ(1) - #define BALLOON3_AUX_NIRQ IRQ_GPIO(BALLOON3_GPIO_AUX_NIRQ) #define BALLOON3_CODEC_IRQ IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ) #define BALLOON3_S0_CD_IRQ IRQ_GPIO(BALLOON3_GPIO_S0_CD) diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h index 5f2ba8d9015c..58dada11054f 100644 --- a/arch/arm/mach-pxa/include/mach/colibri.h +++ b/arch/arm/mach-pxa/include/mach/colibri.h @@ -5,6 +5,27 @@ #include <mach/mfp.h> /* + * base board glue for PXA270 module + */ + +enum { + COLIBRI_PXA270_EVALBOARD = 0, + COLIBRI_PXA270_INCOME, +}; + +#if defined(CONFIG_MACH_COLIBRI_PXA270_EVALBOARD) +extern void colibri_pxa270_evalboard_init(void); +#else +static inline void colibri_pxa270_evalboard_init(void) {} +#endif + +#if defined(CONFIG_MACH_COLIBRI_PXA270_INCOME) +extern void colibri_pxa270_income_boardinit(void); +#else +static inline void colibri_pxa270_income_boardinit(void) {} +#endif + +/* * common settings for all modules */ @@ -33,13 +54,10 @@ static inline void colibri_pxa3xx_init_nand(void) {} /* physical memory regions */ #define COLIBRI_SDRAM_BASE 0xa0000000 /* SDRAM region */ -/* definitions for Colibri PXA270 */ - -#define COLIBRI_PXA270_FLASH_PHYS (PXA_CS0_PHYS) /* Flash region */ -#define COLIBRI_PXA270_ETH_PHYS (PXA_CS2_PHYS) /* Ethernet */ -#define COLIBRI_PXA270_ETH_IRQ_GPIO 114 -#define COLIBRI_PXA270_ETH_IRQ \ - gpio_to_irq(mfp_to_gpio(COLIBRI_PXA270_ETH_IRQ_GPIO)) +/* GPIO definitions for Colibri PXA270 */ +#define GPIO114_COLIBRI_PXA270_ETH_IRQ 114 +#define GPIO0_COLIBRI_PXA270_SD_DETECT 0 +#define GPIO113_COLIBRI_PXA270_TS_IRQ 113 #endif /* _COLIBRI_H_ */ diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h index 585970ef08ce..0011055bc3f9 100644 --- a/arch/arm/mach-pxa/include/mach/corgi.h +++ b/arch/arm/mach-pxa/include/mach/corgi.h @@ -109,10 +109,5 @@ #define CORGI_GPIO_BACKLIGHT_CONT (CORGI_SCOOP_GPIO_BASE + 7) #define CORGI_GPIO_MIC_BIAS (CORGI_SCOOP_GPIO_BASE + 8) -/* - * Shared data structures - */ -extern struct platform_device corgiscoop_device; - #endif /* __ASM_ARCH_CORGI_H */ diff --git a/arch/arm/mach-pxa/include/mach/gumstix.h b/arch/arm/mach-pxa/include/mach/gumstix.h index 06abd4160607..9b898680b206 100644 --- a/arch/arm/mach-pxa/include/mach/gumstix.h +++ b/arch/arm/mach-pxa/include/mach/gumstix.h @@ -14,25 +14,15 @@ /* GPIOn - Input from MAX823 (or equiv), normalizing USB +5V into a clean -interrupt signal for determining cable presence. On the original gumstix, -this is GPIO81, and GPIO83 needs to be defined as well. On the gumstix F, +interrupt signal for determining cable presence. On the gumstix F, this moves to GPIO17 and GPIO37. */ /* GPIOx - Connects to USB D+ and used as a pull-up after GPIOn has detected a cable insertion; driven low otherwise. */ -#ifdef CONFIG_ARCH_GUMSTIX_ORIG - -#define GPIO_GUMSTIX_USB_GPIOn 81 -#define GPIO_GUMSTIX_USB_GPIOx 83 - -#else - #define GPIO_GUMSTIX_USB_GPIOn 35 #define GPIO_GUMSTIX_USB_GPIOx 41 -#endif - /* usb state change */ #define GUMSTIX_USB_INTR_IRQ IRQ_GPIO(GPIO_GUMSTIX_USB_GPIOn) diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h index 3d8d8cb09685..7f64d24cd564 100644 --- a/arch/arm/mach-pxa/include/mach/hardware.h +++ b/arch/arm/mach-pxa/include/mach/hardware.h @@ -14,11 +14,6 @@ #define __ASM_ARCH_HARDWARE_H /* - * We requires absolute addresses. - */ -#define PCIO_BASE 0 - -/* * Workarounds for at least 2 errata so far require this. * The mapping is set in mach-pxa/generic.c. */ diff --git a/arch/arm/mach-pxa/include/mach/palm27x.h b/arch/arm/mach-pxa/include/mach/palm27x.h new file mode 100644 index 000000000000..0a5e5eadebf5 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/palm27x.h @@ -0,0 +1,81 @@ +/* + * Common functions for Palm LD, T5, TX, Z72 + * + * Copyright (C) 2010 + * Marek Vasut <marek.vasut@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#ifndef __INCLUDE_MACH_PALM27X__ +#define __INCLUDE_MACH_PALM27X__ + +#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) +extern void __init palm27x_mmc_init(int detect, int ro, int power, + int power_inverted); +#else +static inline void palm27x_mmc_init(int detect, int ro, int power, + int power_inverted) +{} +#endif + +#if defined(CONFIG_SUSPEND) +extern void __init palm27x_pm_init(unsigned long str_base); +#else +static inline void palm27x_pm_init(unsigned long str_base) {} +#endif + +#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) +extern struct pxafb_mode_info palm_320x480_lcd_mode; +extern struct pxafb_mode_info palm_320x320_lcd_mode; +extern struct pxafb_mode_info palm_320x320_new_lcd_mode; +extern void __init palm27x_lcd_init(int power, + struct pxafb_mode_info *mode); +#else +static inline void palm27x_lcd_init(int power, struct pxafb_mode_info *mode) {} +#endif + +#if defined(CONFIG_USB_GADGET_PXA27X) || \ + defined(CONFIG_USB_GADGET_PXA27X_MODULE) +extern void __init palm27x_udc_init(int vbus, int pullup, + int vbus_inverted); +#else +static inline void palm27x_udc_init(int vbus, int pullup, int vbus_inverted) {} +#endif + +#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE) +extern void __init palm27x_irda_init(int pwdn); +#else +static inline void palm27x_irda_init(int pwdn) {} +#endif + +#if defined(CONFIG_TOUCHSCREEN_WM97XX) || \ + defined(CONFIG_TOUCHSCREEN_WM97XX_MODULE) +extern void __init palm27x_ac97_init(int minv, int maxv, int jack, + int reset); +#else +static inline void palm27x_ac97_init(int minv, int maxv, int jack, int reset) {} +#endif + +#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE) +extern void __init palm27x_pwm_init(int bl, int lcd); +#else +static inline void palm27x_pwm_init(int bl, int lcd) {} +#endif + +#if defined(CONFIG_PDA_POWER) || defined(CONFIG_PDA_POWER_MODULE) +extern void __init palm27x_power_init(int ac, int usb); +#else +static inline void palm27x_power_init(int ac, int usb) {} +#endif + +#if defined(CONFIG_REGULATOR_MAX1586) || \ + defined(CONFIG_REGULATOR_MAX1586_MODULE) +extern void __init palm27x_pmic_init(void); +#else +static inline void palm27x_pmic_init(void) {} +#endif + +#endif /* __INCLUDE_MACH_PALM27X__ */ diff --git a/arch/arm/mach-pxa/include/mach/pata_pxa.h b/arch/arm/mach-pxa/include/mach/pata_pxa.h new file mode 100644 index 000000000000..6cf7df1d5830 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/pata_pxa.h @@ -0,0 +1,33 @@ +/* + * Generic PXA PATA driver + * + * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __MACH_PATA_PXA_H__ +#define __MACH_PATA_PXA_H__ + +struct pata_pxa_pdata { + /* PXA DMA DREQ<0:2> pin */ + uint32_t dma_dreq; + /* Register shift */ + uint32_t reg_shift; + /* IRQ flags */ + uint32_t irq_flags; +}; + +#endif /* __MACH_PATA_PXA_H__ */ diff --git a/arch/arm/mach-pxa/include/mach/sharpsl.h b/arch/arm/mach-pxa/include/mach/sharpsl.h deleted file mode 100644 index 8242e14a44fa..000000000000 --- a/arch/arm/mach-pxa/include/mach/sharpsl.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * SharpSL SSP Driver - */ - -unsigned long corgi_ssp_ads7846_putget(unsigned long); -unsigned long corgi_ssp_ads7846_get(void); -void corgi_ssp_ads7846_put(unsigned long data); -void corgi_ssp_ads7846_lock(void); -void corgi_ssp_ads7846_unlock(void); -void corgi_ssp_lcdtg_send (unsigned char adrs, unsigned char data); -void corgi_ssp_blduty_set(int duty); -int corgi_ssp_max1111_get(unsigned long data); - -/* - * SharpSL Touchscreen Driver - */ - -struct corgits_machinfo { - unsigned long (*get_hsync_invperiod)(void); - void (*put_hsync)(void); - void (*wait_hsync)(void); -}; - - -/* - * SharpSL Backlight - */ -extern void corgibl_limit_intensity(int limit); -extern void corgi_lcd_limit_intensity(int limit); - - -/* - * SharpSL Battery/PM Driver - */ -extern void sharpsl_battery_kick(void); diff --git a/arch/arm/mach-pxa/include/mach/sharpsl_pm.h b/arch/arm/mach-pxa/include/mach/sharpsl_pm.h index 1920dc6b05dc..905be6755f04 100644 --- a/arch/arm/mach-pxa/include/mach/sharpsl_pm.h +++ b/arch/arm/mach-pxa/include/mach/sharpsl_pm.h @@ -93,6 +93,8 @@ struct sharpsl_pm_status { extern struct sharpsl_pm_status sharpsl_pm; +extern struct battery_thresh sharpsl_battery_levels_acin[]; +extern struct battery_thresh sharpsl_battery_levels_noac[]; #define SHARPSL_LED_ERROR 2 #define SHARPSL_LED_ON 1 @@ -101,4 +103,11 @@ extern struct sharpsl_pm_status sharpsl_pm; void sharpsl_battery_kick(void); void sharpsl_pm_led(int val); +/* MAX1111 Channel Definitions */ +#define MAX1111_BATT_VOLT 4u +#define MAX1111_BATT_TEMP 2u +#define MAX1111_ACIN_VOLT 6u +int sharpsl_pm_pxa_read_max1111(int channel); + +void corgi_lcd_limit_intensity(int limit); #endif diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h index fa1998caa78e..685749a51c42 100644 --- a/arch/arm/mach-pxa/include/mach/spitz.h +++ b/arch/arm/mach-pxa/include/mach/spitz.h @@ -185,7 +185,5 @@ /* * Shared data structures */ -extern struct platform_device spitzscoop_device; -extern struct platform_device spitzscoop2_device; extern struct platform_device spitzssp_device; extern struct sharpsl_charger_machinfo spitz_pm_machinfo; |