18 files changed, 148 insertions, 251 deletions

diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index a10996782476..bc55d07566ca 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -518,4 +518,7 @@ MACHINE_START(ARMCORE, "Compulab CM-X2XX")
 	.init_irq	= cmx2xx_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= cmx2xx_init,
+#ifdef CONFIG_PCI
+	.dma_zone_size	= SZ_64M,
+#endif
 MACHINE_END
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index b2248e76ec8b..b199596f9c3d 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -12,6 +12,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#define pr_fmt(fmt) "%s: " fmt, __func__
 
 #include <linux/module.h>
 #include <linux/kernel.h>
@@ -161,10 +162,10 @@ static mfp_cfg_t cm_x3xx_mfp_cfg[] __initdata = {
 	GPIO99_GPIO,			/* Ethernet IRQ */
 
 	/* RTC GPIOs */
-	GPIO95_GPIO,			/* RTC CS */
-	GPIO96_GPIO,			/* RTC WR */
-	GPIO97_GPIO,			/* RTC RD */
-	GPIO98_GPIO,			/* RTC IO */
+	GPIO95_GPIO | MFP_LPM_DRIVE_HIGH,	/* RTC CS */
+	GPIO96_GPIO | MFP_LPM_DRIVE_HIGH,	/* RTC WR */
+	GPIO97_GPIO | MFP_LPM_DRIVE_HIGH,	/* RTC RD */
+	GPIO98_GPIO,				/* RTC IO */
 
 	/* Standard I2C */
 	GPIO21_I2C_SCL,
@@ -484,14 +485,13 @@ static int cm_x300_ulpi_phy_reset(void)
 	int err;
 
 	/* reset the PHY */
-	err = gpio_request(GPIO_ULPI_PHY_RST, "ulpi reset");
+	err = gpio_request_one(GPIO_ULPI_PHY_RST, GPIOF_OUT_INIT_LOW,
+			       "ulpi reset");
 	if (err) {
-		pr_err("%s: failed to request ULPI reset GPIO: %d\n",
-		       __func__, err);
+		pr_err("failed to request ULPI reset GPIO: %d\n", err);
 		return err;
 	}
 
-	gpio_direction_output(GPIO_ULPI_PHY_RST, 0);
 	msleep(10);
 	gpio_set_value(GPIO_ULPI_PHY_RST, 1);
 	msleep(10);
@@ -510,8 +510,7 @@ static inline int cm_x300_u2d_init(struct device *dev)
 		pout_clk = clk_get(NULL, "CLK_POUT");
 		if (IS_ERR(pout_clk)) {
 			err = PTR_ERR(pout_clk);
-			pr_err("%s: failed to get CLK_POUT: %d\n",
-			       __func__, err);
+			pr_err("failed to get CLK_POUT: %d\n", err);
 			return err;
 		}
 		clk_enable(pout_clk);
@@ -768,39 +767,36 @@ static void __init cm_x300_init_da9030(void)
 	irq_set_irq_wake(IRQ_WAKEUP0, 1);
 }
 
+/* wi2wi gpio setting for system_rev >= 130 */
+static struct gpio cm_x300_wi2wi_gpios[] __initdata = {
+	{ 71, GPIOF_OUT_INIT_HIGH, "wlan en" },
+	{ 70, GPIOF_OUT_INIT_HIGH, "bt reset" },
+};
+
 static void __init cm_x300_init_wi2wi(void)
 {
 	int bt_reset, wlan_en;
 	int err;
 
 	if (system_rev < 130) {
-		wlan_en = 77;
-		bt_reset = 78;
-	} else {
-		wlan_en = 71;
-		bt_reset = 70;
+		cm_x300_wi2wi_gpios[0].gpio = 77;	/* wlan en */
+		cm_x300_wi2wi_gpios[1].gpio = 78;	/* bt reset */
 	}
 
 	/* Libertas and CSR reset */
-	err = gpio_request(wlan_en, "wlan en");
+	err = gpio_request_array(ARRAY_AND_SIZE(cm_x300_wi2wi_gpios));
 	if (err) {
-		pr_err("CM-X300: failed to request wlan en gpio: %d\n", err);
-	} else {
-		gpio_direction_output(wlan_en, 1);
-		gpio_free(wlan_en);
+		pr_err("failed to request wifi/bt gpios: %d\n", err);
+		return;
 	}
 
-	err = gpio_request(bt_reset, "bt reset");
-	if (err) {
-		pr_err("CM-X300: failed to request bt reset gpio: %d\n", err);
-	} else {
-		gpio_direction_output(bt_reset, 1);
-		udelay(10);
-		gpio_set_value(bt_reset, 0);
-		udelay(10);
-		gpio_set_value(bt_reset, 1);
-		gpio_free(bt_reset);
-	}
+	udelay(10);
+	gpio_set_value(bt_reset, 0);
+	udelay(10);
+	gpio_set_value(bt_reset, 1);
+
+	gpio_free(wlan_en);
+	gpio_free(bt_reset);
 }
 
 /* MFP */
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index f941a495a4a8..99960a1814e0 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -135,42 +135,6 @@ static unsigned long hx4700_pin_config[] __initdata = {
 	GPIO66_GPIO,	/* nSDIO_IRQ */
 };
 
-#define HX4700_GPIO_IN(num, _desc) \
-	{ .gpio = (num), .dir = 0, .desc = (_desc) }
-#define HX4700_GPIO_OUT(num, _init, _desc) \
-	{ .gpio = (num), .dir = 1, .init = (_init), .desc = (_desc) }
-struct gpio_ress {
-	unsigned gpio : 8;
-	unsigned dir : 1;
-	unsigned init : 1;
-	char *desc;
-};
-
-static int hx4700_gpio_request(struct gpio_ress *gpios, int size)
-{
-	int i, rc = 0;
-	int gpio;
-	int dir;
-
-	for (i = 0; (!rc) && (i < size); i++) {
-		gpio = gpios[i].gpio;
-		dir = gpios[i].dir;
-		rc = gpio_request(gpio, gpios[i].desc);
-		if (rc) {
-			pr_err("Error requesting GPIO %d(%s) : %d\n",
-			       gpio, gpios[i].desc, rc);
-			continue;
-		}
-		if (dir)
-			gpio_direction_output(gpio, gpios[i].init);
-		else
-			gpio_direction_input(gpio);
-	}
-	while ((rc) && (--i >= 0))
-		gpio_free(gpios[i].gpio);
-	return rc;
-}
-
 /*
  * IRDA
  */
@@ -829,26 +793,30 @@ static struct platform_device *devices[] __initdata = {
 	&pcmcia,
 };
 
-static struct gpio_ress global_gpios[] = {
-	HX4700_GPIO_IN(GPIO12_HX4700_ASIC3_IRQ, "ASIC3_IRQ"),
-	HX4700_GPIO_IN(GPIO13_HX4700_W3220_IRQ, "W3220_IRQ"),
-	HX4700_GPIO_IN(GPIO14_HX4700_nWLAN_IRQ, "WLAN_IRQ"),
-	HX4700_GPIO_OUT(GPIO59_HX4700_LCD_PC1,          1, "LCD_PC1"),
-	HX4700_GPIO_OUT(GPIO62_HX4700_LCD_nRESET,       1, "LCD_RESET"),
-	HX4700_GPIO_OUT(GPIO70_HX4700_LCD_SLIN1,        1, "LCD_SLIN1"),
-	HX4700_GPIO_OUT(GPIO84_HX4700_LCD_SQN,          1, "LCD_SQN"),
-	HX4700_GPIO_OUT(GPIO110_HX4700_LCD_LVDD_3V3_ON, 1, "LCD_LVDD"),
-	HX4700_GPIO_OUT(GPIO111_HX4700_LCD_AVDD_3V3_ON, 1, "LCD_AVDD"),
-	HX4700_GPIO_OUT(GPIO32_HX4700_RS232_ON,         1, "RS232_ON"),
-	HX4700_GPIO_OUT(GPIO71_HX4700_ASIC3_nRESET,     1, "ASIC3_nRESET"),
-	HX4700_GPIO_OUT(GPIO82_HX4700_EUART_RESET,      1, "EUART_RESET"),
-	HX4700_GPIO_OUT(GPIO105_HX4700_nIR_ON,          1, "nIR_EN"),
+static struct gpio global_gpios[] = {
+	{ GPIO12_HX4700_ASIC3_IRQ, GPIOF_IN, "ASIC3_IRQ" },
+	{ GPIO13_HX4700_W3220_IRQ, GPIOF_IN, "W3220_IRQ" },
+	{ GPIO14_HX4700_nWLAN_IRQ, GPIOF_IN, "WLAN_IRQ" },
+	{ GPIO59_HX4700_LCD_PC1,          GPIOF_OUT_INIT_HIGH, "LCD_PC1" },
+	{ GPIO62_HX4700_LCD_nRESET,       GPIOF_OUT_INIT_HIGH, "LCD_RESET" },
+	{ GPIO70_HX4700_LCD_SLIN1,        GPIOF_OUT_INIT_HIGH, "LCD_SLIN1" },
+	{ GPIO84_HX4700_LCD_SQN,          GPIOF_OUT_INIT_HIGH, "LCD_SQN" },
+	{ GPIO110_HX4700_LCD_LVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_LVDD" },
+	{ GPIO111_HX4700_LCD_AVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_AVDD" },
+	{ GPIO32_HX4700_RS232_ON,         GPIOF_OUT_INIT_HIGH, "RS232_ON" },
+	{ GPIO71_HX4700_ASIC3_nRESET,     GPIOF_OUT_INIT_HIGH, "ASIC3_nRESET" },
+	{ GPIO82_HX4700_EUART_RESET,      GPIOF_OUT_INIT_HIGH, "EUART_RESET" },
+	{ GPIO105_HX4700_nIR_ON,          GPIOF_OUT_INIT_HIGH, "nIR_EN" },
 };
 
 static void __init hx4700_init(void)
 {
+	int ret;
+
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config));
-	hx4700_gpio_request(ARRAY_AND_SIZE(global_gpios));
+	ret = gpio_request_array(ARRAY_AND_SIZE(global_gpios));
+	if (ret)
+		pr_err ("hx4700: Failed to request GPIOs.\n");
 
 	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h
index 0a2efcf7947c..7cbfc5d3f9df 100644
--- a/arch/arm/mach-pxa/include/mach/magician.h
+++ b/arch/arm/mach-pxa/include/mach/magician.h
@@ -12,6 +12,7 @@
 #ifndef _MAGICIAN_H_
 #define _MAGICIAN_H_
 
+#include <linux/gpio.h>
 #include <mach/irqs.h>
 
 /*
@@ -77,7 +78,7 @@
  * CPLD EGPIOs
  */
 
-#define MAGICIAN_EGPIO_BASE			0x80 /* GPIO_BOARD_START */
+#define MAGICIAN_EGPIO_BASE			NR_BUILTIN_GPIO
 #define MAGICIAN_EGPIO(reg,bit) \
 	(MAGICIAN_EGPIO_BASE + 8*reg + bit)
 
diff --git a/arch/arm/mach-pxa/include/mach/memory.h b/arch/arm/mach-pxa/include/mach/memory.h
index 07734f37f8fd..d05a59727d66 100644
--- a/arch/arm/mach-pxa/include/mach/memory.h
+++ b/arch/arm/mach-pxa/include/mach/memory.h
@@ -17,8 +17,4 @@
  */
 #define PLAT_PHYS_OFFSET	UL(0xa0000000)
 
-#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
-#define ARM_DMA_ZONE_SIZE	SZ_64M
-#endif
-
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/pm.h b/arch/arm/mach-pxa/include/mach/pm.h
index f15afe012995..51558bcee999 100644
--- a/arch/arm/mach-pxa/include/mach/pm.h
+++ b/arch/arm/mach-pxa/include/mach/pm.h
@@ -22,8 +22,8 @@ struct pxa_cpu_pm_fns {
 extern struct pxa_cpu_pm_fns *pxa_cpu_pm_fns;
 
 /* sleep.S */
-extern void pxa25x_cpu_suspend(unsigned int, long);
-extern void pxa27x_cpu_suspend(unsigned int, long);
+extern int pxa25x_finish_suspend(unsigned long);
+extern int pxa27x_finish_suspend(unsigned long);
 
 extern int pxa_pm_enter(suspend_state_t state);
 extern int pxa_pm_prepare(void);
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index e1920572948a..0e42798942f7 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -344,22 +344,14 @@ static struct pxafb_mach_info samsung_info = {
  * Backlight
  */
 
+static struct gpio magician_bl_gpios[] = {
+	{ EGPIO_MAGICIAN_BL_POWER,  GPIOF_DIR_OUT, "Backlight power" },
+	{ EGPIO_MAGICIAN_BL_POWER2, GPIOF_DIR_OUT, "Backlight power 2" },
+};
+
 static int magician_backlight_init(struct device *dev)
 {
-	int ret;
-
-	ret = gpio_request(EGPIO_MAGICIAN_BL_POWER, "BL_POWER");
-	if (ret)
-		goto err;
-	ret = gpio_request(EGPIO_MAGICIAN_BL_POWER2, "BL_POWER2");
-	if (ret)
-		goto err2;
-	return 0;
-
-err2:
-	gpio_free(EGPIO_MAGICIAN_BL_POWER);
-err:
-	return ret;
+	return gpio_request_array(ARRAY_AND_SIZE(magician_bl_gpios));
 }
 
 static int magician_backlight_notify(struct device *dev, int brightness)
@@ -376,8 +368,7 @@ static int magician_backlight_notify(struct device *dev, int brightness)
 
 static void magician_backlight_exit(struct device *dev)
 {
-	gpio_free(EGPIO_MAGICIAN_BL_POWER);
-	gpio_free(EGPIO_MAGICIAN_BL_POWER2);
+	gpio_free_array(ARRAY_AND_SIZE(magician_bl_gpios));
 }
 
 static struct platform_pwm_backlight_data backlight_data = {
@@ -712,16 +703,25 @@ static struct platform_device *devices[] __initdata = {
 	&leds_gpio,
 };
 
+static struct gpio magician_global_gpios[] = {
+	{ GPIO13_MAGICIAN_CPLD_IRQ,   GPIOF_IN, "CPLD_IRQ" },
+	{ GPIO107_MAGICIAN_DS1WM_IRQ, GPIOF_IN, "DS1WM_IRQ" },
+	{ GPIO104_MAGICIAN_LCD_POWER_1, GPIOF_OUT_INIT_LOW, "LCD power 1" },
+	{ GPIO105_MAGICIAN_LCD_POWER_2, GPIOF_OUT_INIT_LOW, "LCD power 2" },
+	{ GPIO106_MAGICIAN_LCD_POWER_3, GPIOF_OUT_INIT_LOW, "LCD power 3" },
+	{ GPIO83_MAGICIAN_nIR_EN, GPIOF_OUT_INIT_HIGH, "nIR_EN" },
+};
+
 static void __init magician_init(void)
 {
 	void __iomem *cpld;
 	int lcd_select;
 	int err;
 
-	gpio_request(GPIO13_MAGICIAN_CPLD_IRQ, "CPLD_IRQ");
-	gpio_request(GPIO107_MAGICIAN_DS1WM_IRQ, "DS1WM_IRQ");
-
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(magician_pin_config));
+	err = gpio_request_array(ARRAY_AND_SIZE(magician_global_gpios));
+	if (err)
+		pr_err("magician: Failed to request GPIOs: %d\n", err);
 
 	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
@@ -729,11 +729,7 @@ static void __init magician_init(void)
 
 	platform_add_devices(ARRAY_AND_SIZE(devices));
 
-	err = gpio_request(GPIO83_MAGICIAN_nIR_EN, "nIR_EN");
-	if (!err) {
-		gpio_direction_output(GPIO83_MAGICIAN_nIR_EN, 1);
-		pxa_set_ficp_info(&magician_ficp_info);
-	}
+	pxa_set_ficp_info(&magician_ficp_info);
 	pxa27x_set_i2c_power_info(NULL);
 	pxa_set_i2c_info(&i2c_info);
 	pxa_set_mci_info(&magician_mci_info);
@@ -747,16 +743,9 @@ static void __init magician_init(void)
 		system_rev = board_id & 0x7;
 		lcd_select = board_id & 0x8;
 		pr_info("LCD type: %s\n", lcd_select ? "Samsung" : "Toppoly");
-		if (lcd_select && (system_rev < 3)) {
-			gpio_request(GPIO75_MAGICIAN_SAMSUNG_POWER, "SAMSUNG_POWER");
-			gpio_direction_output(GPIO75_MAGICIAN_SAMSUNG_POWER, 0);
-		}
-		gpio_request(GPIO104_MAGICIAN_LCD_POWER_1, "LCD_POWER_1");
-		gpio_request(GPIO105_MAGICIAN_LCD_POWER_2, "LCD_POWER_2");
-		gpio_request(GPIO106_MAGICIAN_LCD_POWER_3, "LCD_POWER_3");
-		gpio_direction_output(GPIO104_MAGICIAN_LCD_POWER_1, 0);
-		gpio_direction_output(GPIO105_MAGICIAN_LCD_POWER_2, 0);
-		gpio_direction_output(GPIO106_MAGICIAN_LCD_POWER_3, 0);
+		if (lcd_select && (system_rev < 3))
+			gpio_request_one(GPIO75_MAGICIAN_SAMSUNG_POWER,
+			                 GPIOF_OUT_INIT_LOW, "SAMSUNG_POWER");
 		pxa_set_fb_info(NULL, lcd_select ? &samsung_info : &toppoly_info);
 	} else
 		pr_err("LCD detection: CPLD mapping failed\n");
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index 87ae3129f4f7..b27544bcafcb 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -347,9 +347,9 @@ static int pxa2xx_mfp_suspend(void)
 		if ((gpio_desc[i].config & MFP_LPM_KEEP_OUTPUT) &&
 		    (GPDR(i) & GPIO_bit(i))) {
 			if (GPLR(i) & GPIO_bit(i))
-				PGSR(i) |= GPIO_bit(i);
+				PGSR(gpio_to_bank(i)) |= GPIO_bit(i);
 			else
-				PGSR(i) &= ~GPIO_bit(i);
+				PGSR(gpio_to_bank(i)) &= ~GPIO_bit(i);
 		}
 	}
 
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index e3470137c934..aa67637ae41d 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -177,50 +177,6 @@ static unsigned long mioa701_pin_config[] = {
 	MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH),
 };
 
-#define MIO_GPIO_IN(num, _desc) \
-	{ .gpio = (num), .dir = 0, .desc = (_desc) }
-#define MIO_GPIO_OUT(num, _init, _desc) \
-	{ .gpio = (num), .dir = 1, .init = (_init), .desc = (_desc) }
-struct gpio_ress {
-	unsigned gpio : 8;
-	unsigned dir : 1;
-	unsigned init : 1;
-	char *desc;
-};
-
-static int mio_gpio_request(struct gpio_ress *gpios, int size)
-{
-	int i, rc = 0;
-	int gpio;
-	int dir;
-
-	for (i = 0; (!rc) && (i < size); i++) {
-		gpio = gpios[i].gpio;
-		dir = gpios[i].dir;
-		rc = gpio_request(gpio, gpios[i].desc);
-		if (rc) {
-			printk(KERN_ERR "Error requesting GPIO %d(%s) : %d\n",
-			       gpio, gpios[i].desc, rc);
-			continue;
-		}
-		if (dir)
-			gpio_direction_output(gpio, gpios[i].init);
-		else
-			gpio_direction_input(gpio);
-	}
-	while ((rc) && (--i >= 0))
-		gpio_free(gpios[i].gpio);
-	return rc;
-}
-
-static void mio_gpio_free(struct gpio_ress *gpios, int size)
-{
-	int i;
-
-	for (i = 0; i < size; i++)
-		gpio_free(gpios[i].gpio);
-}
-
 /* LCD Screen and Backlight */
 static struct platform_pwm_backlight_data mioa701_backlight_data = {
 	.pwm_id		= 0,
@@ -346,16 +302,16 @@ irqreturn_t gsm_on_irq(int irq, void *p)
 	return IRQ_HANDLED;
 }
 
-struct gpio_ress gsm_gpios[] = {
-	MIO_GPIO_IN(GPIO25_GSM_MOD_ON_STATE, "GSM state"),
-	MIO_GPIO_IN(GPIO113_GSM_EVENT, "GSM event"),
+static struct gpio gsm_gpios[] = {
+	{ GPIO25_GSM_MOD_ON_STATE, GPIOF_IN, "GSM state" },
+	{ GPIO113_GSM_EVENT, GPIOF_IN, "GSM event" },
 };
 
 static int __init gsm_init(void)
 {
 	int rc;
 
-	rc = mio_gpio_request(ARRAY_AND_SIZE(gsm_gpios));
+	rc = gpio_request_array(ARRAY_AND_SIZE(gsm_gpios));
 	if (rc)
 		goto err_gpio;
 	rc = request_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), gsm_on_irq,
@@ -369,7 +325,7 @@ static int __init gsm_init(void)
 
 err_irq:
 	printk(KERN_ERR "Mioa701: Can't request GSM_ON irq\n");
-	mio_gpio_free(ARRAY_AND_SIZE(gsm_gpios));
+	gpio_free_array(ARRAY_AND_SIZE(gsm_gpios));
 err_gpio:
 	printk(KERN_ERR "Mioa701: gsm not available\n");
 	return rc;
@@ -378,7 +334,7 @@ err_gpio:
 static void gsm_exit(void)
 {
 	free_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), NULL);
-	mio_gpio_free(ARRAY_AND_SIZE(gsm_gpios));
+	gpio_free_array(ARRAY_AND_SIZE(gsm_gpios));
 }
 
 /*
@@ -749,14 +705,16 @@ static void mioa701_restart(char c, const char *cmd)
 	arm_machine_restart('s', cmd);
 }
 
-static struct gpio_ress global_gpios[] = {
-	MIO_GPIO_OUT(GPIO9_CHARGE_EN, 1, "Charger enable"),
-	MIO_GPIO_OUT(GPIO18_POWEROFF, 0, "Power Off"),
-	MIO_GPIO_OUT(GPIO87_LCD_POWER, 0, "LCD Power"),
+static struct gpio global_gpios[] = {
+	{ GPIO9_CHARGE_EN, GPIOF_OUT_INIT_HIGH, "Charger enable" },
+	{ GPIO18_POWEROFF, GPIOF_OUT_INIT_LOW, "Power Off" },
+	{ GPIO87_LCD_POWER, GPIOF_OUT_INIT_LOW, "LCD Power" },
 };
 
 static void __init mioa701_machine_init(void)
 {
+	int rc;
+
 	PSLR  = 0xff100000; /* SYSDEL=125ms, PWRDEL=125ms, PSLR_SL_ROD=1 */
 	PCFR = PCFR_DC_EN | PCFR_GPR_EN | PCFR_OPDE;
 	RTTR = 32768 - 1; /* Reset crazy WinCE value */
@@ -766,7 +724,9 @@ static void __init mioa701_machine_init(void)
 	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
-	mio_gpio_request(ARRAY_AND_SIZE(global_gpios));
+	rc = gpio_request_array(ARRAY_AND_SIZE(global_gpios));
+	if (rc)
+		pr_err("MioA701: Failed to request GPIOs: %d", rc);
 	bootstrap_init();
 	pxa_set_fb_info(NULL, &mioa701_pxafb_info);
 	pxa_set_mci_info(&mioa701_mci_info);
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 65f24f0b77e8..5a5329bc33f1 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -33,6 +33,7 @@
 #include <linux/i2c-gpio.h>
 
 #include <asm/mach-types.h>
+#include <asm/suspend.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index 51e1583265b2..37178a8559b1 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -42,7 +42,6 @@ int pxa_pm_enter(suspend_state_t state)
 
 	/* *** go zzz *** */
 	pxa_cpu_pm_fns->enter(state);
-	cpu_init();
 
 	if (state != PM_SUSPEND_STANDBY && pxa_cpu_pm_fns->restore) {
 		/* after sleeping, validate the checksum */
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index fed363cec9c6..9c434d21a271 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -25,6 +25,7 @@
 #include <linux/irq.h>
 
 #include <asm/mach/map.h>
+#include <asm/suspend.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/gpio.h>
@@ -244,7 +245,7 @@ static void pxa25x_cpu_pm_enter(suspend_state_t state)
 
 	switch (state) {
 	case PM_SUSPEND_MEM:
-		pxa25x_cpu_suspend(PWRMODE_SLEEP, PLAT_PHYS_OFFSET - PAGE_OFFSET);
+		cpu_suspend(PWRMODE_SLEEP, pxa25x_finish_suspend);
 		break;
 	}
 }
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 2fecbec58d88..9d2400b5f503 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -24,6 +24,7 @@
 #include <asm/mach/map.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
+#include <asm/suspend.h>
 #include <mach/irqs.h>
 #include <mach/gpio.h>
 #include <mach/pxa27x.h>
@@ -284,6 +285,11 @@ void pxa27x_cpu_pm_restore(unsigned long *sleep_save)
 void pxa27x_cpu_pm_enter(suspend_state_t state)
 {
 	extern void pxa_cpu_standby(void);
+#ifndef CONFIG_IWMMXT
+	u64 acc0;
+
+	asm volatile("mra %Q0, %R0, acc0" : "=r" (acc0));
+#endif
 
 	/* ensure voltage-change sequencer not initiated, which hangs */
 	PCFR &= ~PCFR_FVC;
@@ -299,7 +305,10 @@ void pxa27x_cpu_pm_enter(suspend_state_t state)
 		pxa_cpu_standby();
 		break;
 	case PM_SUSPEND_MEM:
-		pxa27x_cpu_suspend(pwrmode, PLAT_PHYS_OFFSET - PAGE_OFFSET);
+		cpu_suspend(pwrmode, pxa27x_finish_suspend);
+#ifndef CONFIG_IWMMXT
+		asm volatile("mar acc0, %Q0, %R0" : "=r" (acc0));
+#endif
 		break;
 	}
 }
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 8521d7d6f1da..ef1c56a67afc 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -24,6 +24,7 @@
 #include <linux/i2c/pxa-i2c.h>
 
 #include <asm/mach/map.h>
+#include <asm/suspend.h>
 #include <mach/hardware.h>
 #include <mach/gpio.h>
 #include <mach/pxa3xx-regs.h>
@@ -141,8 +142,13 @@ static void pxa3xx_cpu_pm_suspend(void)
 {
 	volatile unsigned long *p = (volatile void *)0xc0000000;
 	unsigned long saved_data = *p;
+#ifndef CONFIG_IWMMXT
+	u64 acc0;
 
-	extern void pxa3xx_cpu_suspend(long);
+	asm volatile("mra %Q0, %R0, acc0" : "=r" (acc0));
+#endif
+
+	extern int pxa3xx_finish_suspend(unsigned long);
 
 	/* resuming from D2 requires the HSIO2/BOOT/TPM clocks enabled */
 	CKENA |= (1 << CKEN_BOOT) | (1 << CKEN_TPM);
@@ -162,11 +168,15 @@ static void pxa3xx_cpu_pm_suspend(void)
 	/* overwrite with the resume address */
 	*p = virt_to_phys(cpu_resume);
 
-	pxa3xx_cpu_suspend(PLAT_PHYS_OFFSET - PAGE_OFFSET);
+	cpu_suspend(0, pxa3xx_finish_suspend);
 
 	*p = saved_data;
 
 	AD3ER = 0;
+
+#ifndef CONFIG_IWMMXT
+	asm volatile("mar acc0, %Q0, %R0" : "=r" (acc0));
+#endif
 }
 
 static void pxa3xx_cpu_pm_enter(suspend_state_t state)
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index d130f77b6d11..2f37d43f51b6 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -573,10 +573,10 @@ static struct pxafb_mode_info sharp_lq043t3dx02_mode = {
 	.xres		= 480,
 	.yres		= 272,
 	.bpp		= 16,
-	.hsync_len	= 4,
+	.hsync_len	= 41,
 	.left_margin	= 2,
 	.right_margin	= 1,
-	.vsync_len	= 1,
+	.vsync_len	= 10,
 	.upper_margin	= 3,
 	.lower_margin	= 1,
 	.sync		= 0,
@@ -596,29 +596,31 @@ static void __init raumfeld_lcd_init(void)
 {
 	int ret;
 
-	pxa_set_fb_info(NULL, &raumfeld_sharp_lcd_info);
-
-	/* Earlier devices had the backlight regulator controlled
-	 * via PWM, later versions use another controller for that */
-	if ((system_rev & 0xff) < 2) {
-		mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT;
-		pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1);
-		platform_device_register(&raumfeld_pwm_backlight_device);
-	} else
-		platform_device_register(&raumfeld_lt3593_device);
-
 	ret = gpio_request(GPIO_TFT_VA_EN, "display VA enable");
 	if (ret < 0)
 		pr_warning("Unable to request GPIO_TFT_VA_EN\n");
 	else
 		gpio_direction_output(GPIO_TFT_VA_EN, 1);
 
+	msleep(100);
+
 	ret = gpio_request(GPIO_DISPLAY_ENABLE, "display enable");
 	if (ret < 0)
 		pr_warning("Unable to request GPIO_DISPLAY_ENABLE\n");
 	else
 		gpio_direction_output(GPIO_DISPLAY_ENABLE, 1);
 
+	/* Hardware revision 2 has the backlight regulator controlled
+	 * by an LT3593, earlier and later devices use PWM for that. */
+	if ((system_rev & 0xff) == 2) {
+		platform_device_register(&raumfeld_lt3593_device);
+	} else {
+		mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT;
+		pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1);
+		platform_device_register(&raumfeld_pwm_backlight_device);
+	}
+
+	pxa_set_fb_info(NULL, &raumfeld_sharp_lcd_info);
 	platform_device_register(&pxa3xx_device_gcu);
 }
 
@@ -657,10 +659,10 @@ static struct lis3lv02d_platform_data lis3_pdata = {
 
 #define SPI_AK4104	\
 {			\
-	.modalias	= "ak4104",	\
-	.max_speed_hz	= 10000,	\
-	.bus_num	= 0,		\
-	.chip_select	= 0,		\
+	.modalias	= "ak4104-codec",	\
+	.max_speed_hz	= 10000,		\
+	.bus_num	= 0,			\
+	.chip_select	= 0,			\
 	.controller_data = (void *) GPIO_SPDIF_CS,	\
 }
 
diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c
index 9322fe527c7f..e53a3334c944 100644
--- a/arch/arm/mach-pxa/saarb.c
+++ b/arch/arm/mach-pxa/saarb.c
@@ -104,7 +104,7 @@ static void __init saarb_init(void)
 
 MACHINE_START(SAARB, "PXA955 Handheld Platform (aka SAARB)")
 	.boot_params    = 0xa0000100,
-	.map_io         = pxa_map_io,
+	.map_io         = pxa3xx_map_io,
 	.nr_irqs	= SAARB_NR_IRQS,
 	.init_irq       = pxa95x_init_irq,
 	.timer          = &pxa_timer,
diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S
index 6f5368899d84..1e544be9905d 100644
--- a/arch/arm/mach-pxa/sleep.S
+++ b/arch/arm/mach-pxa/sleep.S
@@ -24,20 +24,9 @@
 
 #ifdef CONFIG_PXA3xx
 /*
- * pxa3xx_cpu_suspend() - forces CPU into sleep state (S2D3C4)
- *
- * r0 = v:p offset
+ * pxa3xx_finish_suspend() - forces CPU into sleep state (S2D3C4)
  */
-ENTRY(pxa3xx_cpu_suspend)
-
-#ifndef CONFIG_IWMMXT
-	mra	r2, r3, acc0
-#endif
-	stmfd	sp!, {r2 - r12, lr}	@ save registers on stack
-	mov	r1, r0
-	ldr	r3, =pxa_cpu_resume	@ resume function
-	bl	cpu_suspend
-
+ENTRY(pxa3xx_finish_suspend)
 	mov	r0, #0x06		@ S2D3C4 mode
 	mcr	p14, 0, r0, c7, c0, 0	@ enter sleep
 
@@ -46,28 +35,18 @@ ENTRY(pxa3xx_cpu_suspend)
 
 #ifdef CONFIG_PXA27x
 /*
- * pxa27x_cpu_suspend()
+ * pxa27x_finish_suspend()
  *
  * Forces CPU into sleep state.
  *
  * r0 = value for PWRMODE M field for desired sleep state
- * r1 = v:p offset
  */
-ENTRY(pxa27x_cpu_suspend)
-
-#ifndef CONFIG_IWMMXT
-	mra	r2, r3, acc0
-#endif
-	stmfd	sp!, {r2 - r12, lr}		@ save registers on stack
-	mov	r4, r0				@ save sleep mode
-	ldr	r3, =pxa_cpu_resume		@ resume function
-	bl	cpu_suspend
-
+ENTRY(pxa27x_finish_suspend)
 	@ Put the processor to sleep
 	@ (also workaround for sighting 28071)
 
 	@ prepare value for sleep mode
-	mov	r1, r4				@ sleep mode
+	mov	r1, r0				@ sleep mode
 
 	@ prepare pointer to physical address 0 (virtual mapping in generic.c)
 	mov	r2, #UNCACHED_PHYS_0
@@ -99,21 +78,16 @@ ENTRY(pxa27x_cpu_suspend)
 
 #ifdef CONFIG_PXA25x
 /*
- * pxa25x_cpu_suspend()
+ * pxa25x_finish_suspend()
  *
  * Forces CPU into sleep state.
  *
  * r0 = value for PWRMODE M field for desired sleep state
- * r1 = v:p offset
  */
 
-ENTRY(pxa25x_cpu_suspend)
-	stmfd	sp!, {r2 - r12, lr}		@ save registers on stack
-	mov	r4, r0				@ save sleep mode
-	ldr	r3, =pxa_cpu_resume		@ resume function
-	bl	cpu_suspend
+ENTRY(pxa25x_finish_suspend)
 	@ prepare value for sleep mode
-	mov	r1, r4				@ sleep mode
+	mov	r1, r0				@ sleep mode
 
 	@ prepare pointer to physical address 0 (virtual mapping in generic.c)
 	mov	r2, #UNCACHED_PHYS_0
@@ -195,16 +169,3 @@ pxa_cpu_do_suspend:
 	mcr	p14, 0, r1, c7, c0, 0		@ PWRMODE
 
 20:	b	20b				@ loop waiting for sleep
-
-/*
- * pxa_cpu_resume()
- *
- * entry point from bootloader into kernel during resume
- */
-	.align 5
-pxa_cpu_resume:
-	ldmfd	sp!, {r2, r3}
-#ifndef CONFIG_IWMMXT
-	mar	acc0, r2, r3
-#endif
-	ldmfd	sp!, {r4 - r12, pc}		@ return to caller
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 00363c7ac182..9b99cc164de5 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -31,6 +31,7 @@
 #include <linux/can/platform/mcp251x.h>
 
 #include <asm/mach-types.h>
+#include <asm/suspend.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
@@ -676,7 +677,7 @@ static struct pxa2xx_udc_mach_info zeus_udc_info = {
 static void zeus_power_off(void)
 {
 	local_irq_disable();
-	pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP, PLAT_PHYS_OFFSET - PAGE_OFFSET);
+	cpu_suspend(PWRMODE_DEEPSLEEP, pxa27x_finish_suspend);
 }
 #else
 #define zeus_power_off   NULL