diff options
Diffstat (limited to 'arch/arm/mach-s3c/mach-bast.c')
-rw-r--r-- | arch/arm/mach-s3c/mach-bast.c | 587 |
1 files changed, 587 insertions, 0 deletions
diff --git a/arch/arm/mach-s3c/mach-bast.c b/arch/arm/mach-s3c/mach-bast.c new file mode 100644 index 000000000000..328f5d9ae9f9 --- /dev/null +++ b/arch/arm/mach-s3c/mach-bast.c @@ -0,0 +1,587 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2003-2008 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// +// http://www.simtec.co.uk/products/EB2410ITX/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/gpio.h> +#include <linux/syscore_ops.h> +#include <linux/serial_core.h> +#include <linux/serial_s3c.h> +#include <linux/platform_device.h> +#include <linux/dm9000.h> +#include <linux/ata_platform.h> +#include <linux/i2c.h> +#include <linux/io.h> +#include <linux/serial_8250.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/rawnand.h> +#include <linux/mtd/nand_ecc.h> +#include <linux/mtd/partitions.h> + +#include <linux/platform_data/asoc-s3c24xx_simtec.h> +#include <linux/platform_data/hwmon-s3c.h> +#include <linux/platform_data/i2c-s3c2410.h> +#include <linux/platform_data/mtd-nand-s3c2410.h> + +#include <net/ax88796.h> + +#include <asm/irq.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> +#include <asm/mach-types.h> + +#include <linux/platform_data/fb-s3c2410.h> +#include "regs-gpio.h" +#include "gpio-samsung.h" + +#include "cpu.h" +#include <linux/soc/samsung/s3c-cpu-freq.h> +#include "devs.h" +#include "gpio-cfg.h" + +#include "bast.h" +#include "s3c24xx.h" +#include "simtec.h" + +#define COPYRIGHT ", Copyright 2004-2008 Simtec Electronics" + +/* macros for virtual address mods for the io space entries */ +#define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5) +#define VA_C4(item) ((unsigned long)(item) + BAST_VAM_CS4) +#define VA_C3(item) ((unsigned long)(item) + BAST_VAM_CS3) +#define VA_C2(item) ((unsigned long)(item) + BAST_VAM_CS2) + +/* macros to modify the physical addresses for io space */ + +#define PA_CS2(item) (__phys_to_pfn((item) + S3C2410_CS2)) +#define PA_CS3(item) (__phys_to_pfn((item) + S3C2410_CS3)) +#define PA_CS4(item) (__phys_to_pfn((item) + S3C2410_CS4)) +#define PA_CS5(item) (__phys_to_pfn((item) + S3C2410_CS5)) + +static struct map_desc bast_iodesc[] __initdata = { + /* ISA IO areas */ + { + .virtual = (u32)S3C24XX_VA_ISA_BYTE, + .pfn = PA_CS2(BAST_PA_ISAIO), + .length = SZ_16M, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_WORD, + .pfn = PA_CS3(BAST_PA_ISAIO), + .length = SZ_16M, + .type = MT_DEVICE, + }, + /* bast CPLD control registers, and external interrupt controls */ + { + .virtual = (u32)BAST_VA_CTRL1, + .pfn = __phys_to_pfn(BAST_PA_CTRL1), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)BAST_VA_CTRL2, + .pfn = __phys_to_pfn(BAST_PA_CTRL2), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)BAST_VA_CTRL3, + .pfn = __phys_to_pfn(BAST_PA_CTRL3), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)BAST_VA_CTRL4, + .pfn = __phys_to_pfn(BAST_PA_CTRL4), + .length = SZ_1M, + .type = MT_DEVICE, + }, + /* PC104 IRQ mux */ + { + .virtual = (u32)BAST_VA_PC104_IRQREQ, + .pfn = __phys_to_pfn(BAST_PA_PC104_IRQREQ), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)BAST_VA_PC104_IRQRAW, + .pfn = __phys_to_pfn(BAST_PA_PC104_IRQRAW), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)BAST_VA_PC104_IRQMASK, + .pfn = __phys_to_pfn(BAST_PA_PC104_IRQMASK), + .length = SZ_1M, + .type = MT_DEVICE, + }, + + /* peripheral space... one for each of fast/slow/byte/16bit */ + /* note, ide is only decoded in word space, even though some registers + * are only 8bit */ + + /* slow, byte */ + { VA_C2(BAST_VA_ISAIO), PA_CS2(BAST_PA_ISAIO), SZ_16M, MT_DEVICE }, + { VA_C2(BAST_VA_ISAMEM), PA_CS2(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE }, + { VA_C2(BAST_VA_SUPERIO), PA_CS2(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE }, + + /* slow, word */ + { VA_C3(BAST_VA_ISAIO), PA_CS3(BAST_PA_ISAIO), SZ_16M, MT_DEVICE }, + { VA_C3(BAST_VA_ISAMEM), PA_CS3(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE }, + { VA_C3(BAST_VA_SUPERIO), PA_CS3(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE }, + + /* fast, byte */ + { VA_C4(BAST_VA_ISAIO), PA_CS4(BAST_PA_ISAIO), SZ_16M, MT_DEVICE }, + { VA_C4(BAST_VA_ISAMEM), PA_CS4(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE }, + { VA_C4(BAST_VA_SUPERIO), PA_CS4(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE }, + + /* fast, word */ + { VA_C5(BAST_VA_ISAIO), PA_CS5(BAST_PA_ISAIO), SZ_16M, MT_DEVICE }, + { VA_C5(BAST_VA_ISAMEM), PA_CS5(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE }, + { VA_C5(BAST_VA_SUPERIO), PA_CS5(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE }, +}; + +#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK +#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB +#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE + +static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + /* port 2 is not actually used */ + [2] = { + .hwport = 2, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + } +}; + +/* NAND Flash on BAST board */ + +#ifdef CONFIG_PM +static int bast_pm_suspend(void) +{ + /* ensure that an nRESET is not generated on resume. */ + gpio_direction_output(S3C2410_GPA(21), 1); + return 0; +} + +static void bast_pm_resume(void) +{ + s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT); +} + +#else +#define bast_pm_suspend NULL +#define bast_pm_resume NULL +#endif + +static struct syscore_ops bast_pm_syscore_ops = { + .suspend = bast_pm_suspend, + .resume = bast_pm_resume, +}; + +static int smartmedia_map[] = { 0 }; +static int chip0_map[] = { 1 }; +static int chip1_map[] = { 2 }; +static int chip2_map[] = { 3 }; + +static struct mtd_partition __initdata bast_default_nand_part[] = { + [0] = { + .name = "Boot Agent", + .size = SZ_16K, + .offset = 0, + }, + [1] = { + .name = "/boot", + .size = SZ_4M - SZ_16K, + .offset = SZ_16K, + }, + [2] = { + .name = "user", + .offset = SZ_4M, + .size = MTDPART_SIZ_FULL, + } +}; + +/* the bast has 4 selectable slots for nand-flash, the three + * on-board chip areas, as well as the external SmartMedia + * slot. + * + * Note, there is no current hot-plug support for the SmartMedia + * socket. +*/ + +static struct s3c2410_nand_set __initdata bast_nand_sets[] = { + [0] = { + .name = "SmartMedia", + .nr_chips = 1, + .nr_map = smartmedia_map, + .options = NAND_SCAN_SILENT_NODEV, + .nr_partitions = ARRAY_SIZE(bast_default_nand_part), + .partitions = bast_default_nand_part, + }, + [1] = { + .name = "chip0", + .nr_chips = 1, + .nr_map = chip0_map, + .nr_partitions = ARRAY_SIZE(bast_default_nand_part), + .partitions = bast_default_nand_part, + }, + [2] = { + .name = "chip1", + .nr_chips = 1, + .nr_map = chip1_map, + .options = NAND_SCAN_SILENT_NODEV, + .nr_partitions = ARRAY_SIZE(bast_default_nand_part), + .partitions = bast_default_nand_part, + }, + [3] = { + .name = "chip2", + .nr_chips = 1, + .nr_map = chip2_map, + .options = NAND_SCAN_SILENT_NODEV, + .nr_partitions = ARRAY_SIZE(bast_default_nand_part), + .partitions = bast_default_nand_part, + } +}; + +static void bast_nand_select(struct s3c2410_nand_set *set, int slot) +{ + unsigned int tmp; + + slot = set->nr_map[slot] & 3; + + pr_debug("bast_nand: selecting slot %d (set %p,%p)\n", + slot, set, set->nr_map); + + tmp = __raw_readb(BAST_VA_CTRL2); + tmp &= BAST_CPLD_CTLR2_IDERST; + tmp |= slot; + tmp |= BAST_CPLD_CTRL2_WNAND; + + pr_debug("bast_nand: ctrl2 now %02x\n", tmp); + + __raw_writeb(tmp, BAST_VA_CTRL2); +} + +static struct s3c2410_platform_nand __initdata bast_nand_info = { + .tacls = 30, + .twrph0 = 60, + .twrph1 = 60, + .nr_sets = ARRAY_SIZE(bast_nand_sets), + .sets = bast_nand_sets, + .select_chip = bast_nand_select, + .engine_type = NAND_ECC_ENGINE_TYPE_SOFT, +}; + +/* DM9000 */ + +static struct resource bast_dm9k_resource[] = { + [0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_DM9000, 4), + [1] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_DM9000 + 0x40, 0x40), + [2] = DEFINE_RES_NAMED(BAST_IRQ_DM9000 , 1, NULL, IORESOURCE_IRQ \ + | IORESOURCE_IRQ_HIGHLEVEL), +}; + +/* for the moment we limit ourselves to 16bit IO until some + * better IO routines can be written and tested +*/ + +static struct dm9000_plat_data bast_dm9k_platdata = { + .flags = DM9000_PLATF_16BITONLY, +}; + +static struct platform_device bast_device_dm9k = { + .name = "dm9000", + .id = 0, + .num_resources = ARRAY_SIZE(bast_dm9k_resource), + .resource = bast_dm9k_resource, + .dev = { + .platform_data = &bast_dm9k_platdata, + } +}; + +/* serial devices */ + +#define SERIAL_BASE (S3C2410_CS2 + BAST_PA_SUPERIO) +#define SERIAL_FLAGS (UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_SHARE_IRQ) +#define SERIAL_CLK (1843200) + +static struct plat_serial8250_port bast_sio_data[] = { + [0] = { + .mapbase = SERIAL_BASE + 0x2f8, + .irq = BAST_IRQ_PCSERIAL1, + .flags = SERIAL_FLAGS, + .iotype = UPIO_MEM, + .regshift = 0, + .uartclk = SERIAL_CLK, + }, + [1] = { + .mapbase = SERIAL_BASE + 0x3f8, + .irq = BAST_IRQ_PCSERIAL2, + .flags = SERIAL_FLAGS, + .iotype = UPIO_MEM, + .regshift = 0, + .uartclk = SERIAL_CLK, + }, + { } +}; + +static struct platform_device bast_sio = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = &bast_sio_data, + }, +}; + +/* we have devices on the bus which cannot work much over the + * standard 100KHz i2c bus frequency +*/ + +static struct s3c2410_platform_i2c __initdata bast_i2c_info = { + .flags = 0, + .slave_addr = 0x10, + .frequency = 100*1000, +}; + +/* Asix AX88796 10/100 ethernet controller */ + +static struct ax_plat_data bast_asix_platdata = { + .flags = AXFLG_MAC_FROMDEV, + .wordlength = 2, + .dcr_val = 0x48, + .rcr_val = 0x40, +}; + +static struct resource bast_asix_resource[] = { + [0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET, 0x18 * 0x20), + [1] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET + (0x1f * 0x20), 1), + [2] = DEFINE_RES_IRQ(BAST_IRQ_ASIX), +}; + +static struct platform_device bast_device_asix = { + .name = "ax88796", + .id = 0, + .num_resources = ARRAY_SIZE(bast_asix_resource), + .resource = bast_asix_resource, + .dev = { + .platform_data = &bast_asix_platdata + } +}; + +/* Asix AX88796 10/100 ethernet controller parallel port */ + +static struct resource bast_asixpp_resource[] = { + [0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET + (0x18 * 0x20), \ + 0x30 * 0x20), +}; + +static struct platform_device bast_device_axpp = { + .name = "ax88796-pp", + .id = 0, + .num_resources = ARRAY_SIZE(bast_asixpp_resource), + .resource = bast_asixpp_resource, +}; + +/* LCD/VGA controller */ + +static struct s3c2410fb_display __initdata bast_lcd_info[] = { + { + .type = S3C2410_LCDCON1_TFT, + .width = 640, + .height = 480, + + .pixclock = 33333, + .xres = 640, + .yres = 480, + .bpp = 4, + .left_margin = 40, + .right_margin = 20, + .hsync_len = 88, + .upper_margin = 30, + .lower_margin = 32, + .vsync_len = 3, + + .lcdcon5 = 0x00014b02, + }, + { + .type = S3C2410_LCDCON1_TFT, + .width = 640, + .height = 480, + + .pixclock = 33333, + .xres = 640, + .yres = 480, + .bpp = 8, + .left_margin = 40, + .right_margin = 20, + .hsync_len = 88, + .upper_margin = 30, + .lower_margin = 32, + .vsync_len = 3, + + .lcdcon5 = 0x00014b02, + }, + { + .type = S3C2410_LCDCON1_TFT, + .width = 640, + .height = 480, + + .pixclock = 33333, + .xres = 640, + .yres = 480, + .bpp = 16, + .left_margin = 40, + .right_margin = 20, + .hsync_len = 88, + .upper_margin = 30, + .lower_margin = 32, + .vsync_len = 3, + + .lcdcon5 = 0x00014b02, + }, +}; + +/* LCD/VGA controller */ + +static struct s3c2410fb_mach_info __initdata bast_fb_info = { + + .displays = bast_lcd_info, + .num_displays = ARRAY_SIZE(bast_lcd_info), + .default_display = 1, +}; + +/* I2C devices fitted. */ + +static struct i2c_board_info bast_i2c_devs[] __initdata = { + { + I2C_BOARD_INFO("tlv320aic23", 0x1a), + }, { + I2C_BOARD_INFO("simtec-pmu", 0x6b), + }, { + I2C_BOARD_INFO("ch7013", 0x75), + }, +}; + +static struct s3c_hwmon_pdata bast_hwmon_info = { + /* LCD contrast (0-6.6V) */ + .in[0] = &(struct s3c_hwmon_chcfg) { + .name = "lcd-contrast", + .mult = 3300, + .div = 512, + }, + /* LED current feedback */ + .in[1] = &(struct s3c_hwmon_chcfg) { + .name = "led-feedback", + .mult = 3300, + .div = 1024, + }, + /* LCD feedback (0-6.6V) */ + .in[2] = &(struct s3c_hwmon_chcfg) { + .name = "lcd-feedback", + .mult = 3300, + .div = 512, + }, + /* Vcore (1.8-2.0V), Vref 3.3V */ + .in[3] = &(struct s3c_hwmon_chcfg) { + .name = "vcore", + .mult = 3300, + .div = 1024, + }, +}; + +/* Standard BAST devices */ +// cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0 + +static struct platform_device *bast_devices[] __initdata = { + &s3c2410_device_dclk, + &s3c_device_ohci, + &s3c_device_lcd, + &s3c_device_wdt, + &s3c_device_i2c0, + &s3c_device_rtc, + &s3c_device_nand, + &s3c_device_adc, + &s3c_device_hwmon, + &bast_device_dm9k, + &bast_device_asix, + &bast_device_axpp, + &bast_sio, +}; + +static struct s3c_cpufreq_board __initdata bast_cpufreq = { + .refresh = 7800, /* 7.8usec */ + .auto_io = 1, + .need_io = 1, +}; + +static struct s3c24xx_audio_simtec_pdata __initdata bast_audio = { + .have_mic = 1, + .have_lout = 1, +}; + +static void __init bast_map_io(void) +{ + s3c_hwmon_set_platdata(&bast_hwmon_info); + + s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc)); + s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs)); + s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4); +} + +static void __init bast_init_time(void) +{ + s3c2410_init_clocks(12000000); + s3c24xx_timer_init(); +} + +static void __init bast_init(void) +{ + register_syscore_ops(&bast_pm_syscore_ops); + + s3c_i2c0_set_platdata(&bast_i2c_info); + s3c_nand_set_platdata(&bast_nand_info); + s3c24xx_fb_set_platdata(&bast_fb_info); + platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices)); + + i2c_register_board_info(0, bast_i2c_devs, + ARRAY_SIZE(bast_i2c_devs)); + + usb_simtec_init(); + nor_simtec_init(); + simtec_audio_add(NULL, true, &bast_audio); + + WARN_ON(gpio_request(S3C2410_GPA(21), "bast nreset")); + + s3c_cpufreq_setboard(&bast_cpufreq); +} + +MACHINE_START(BAST, "Simtec-BAST") + /* Maintainer: Ben Dooks <ben@simtec.co.uk> */ + .atag_offset = 0x100, + .map_io = bast_map_io, + .init_irq = s3c2410_init_irq, + .init_machine = bast_init, + .init_time = bast_init_time, +MACHINE_END |