1 files changed, 4 insertions, 101 deletions
diff --git a/arch/arm/mach-s5pv210/sleep.S b/arch/arm/mach-s5pv210/sleep.S
index d4d222b716b4..a3d649466fb1 100644
--- a/arch/arm/mach-s5pv210/sleep.S
+++ b/arch/arm/mach-s5pv210/sleep.S
@@ -35,50 +35,24 @@
 	/* s3c_cpu_save
 	 *
 	 * entry:
-	 *	r0 = save address (virtual addr of s3c_sleep_save_phys)
+	 *	r1 = v:p offset
 	*/
 
 ENTRY(s3c_cpu_save)
 
 	stmfd	sp!, { r3 - r12, lr }
-
-	mrc	p15, 0, r4, c13, c0, 0	@ FCSE/PID
-	mrc	p15, 0, r5, c3, c0, 0	@ Domain ID
-	mrc	p15, 0, r6, c2, c0, 0	@ Translation Table BASE0
-	mrc	p15, 0, r7, c2, c0, 1	@ Translation Table BASE1
-	mrc	p15, 0, r8, c2, c0, 2	@ Translation Table Control
-	mrc	p15, 0, r9, c1, c0, 0	@ Control register
-	mrc	p15, 0, r10, c1, c0, 1	@ Auxiliary control register
-	mrc	p15, 0, r11, c1, c0, 2	@ Co-processor access controls
-	mrc	p15, 0, r12, c10, c2, 0	@ Read PRRR
-	mrc	p15, 0, r3, c10, c2, 1	@ READ NMRR
-
-	stmia	r0, { r3 - r13 }
-
-	bl	s3c_pm_cb_flushcache
+	ldr	r3, =resume_with_mmu
+	bl	cpu_suspend
 
 	ldr	r0, =pm_cpu_sleep
 	ldr	r0, [ r0 ]
 	mov	pc, r0
 
 resume_with_mmu:
-	/*
-	 * After MMU is turned on, restore the previous MMU table.
-	 */
-	ldr	r9 , =(PAGE_OFFSET - PHYS_OFFSET)
-	add	r4, r4, r9
-	str	r12, [r4]
-
 	ldmfd	sp!, { r3 - r12, pc }
 
 	.ltorg
 
-	.data
-
-	.global	s3c_sleep_save_phys
-s3c_sleep_save_phys:
-	.word	0
-
 	/* sleep magic, to allow the bootloader to check for an valid
 	 * image to resume to. Must be the first word before the
 	 * s3c_cpu_resume entry.
@@ -96,75 +70,4 @@ s3c_sleep_save_phys:
 	*/
 
 ENTRY(s3c_cpu_resume)
-	mov	r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
-	msr	cpsr_c, r0
-
-	mov	r1, #0
-	mcr	p15, 0, r1, c8, c7, 0		@ invalidate TLBs
-	mcr	p15, 0, r1, c7, c5, 0		@ invalidate I Cache
-
-	ldr	r0, s3c_sleep_save_phys		@ address of restore block
-	ldmia	r0, { r3 - r13 }
-
-	mcr	p15, 0, r4, c13, c0, 0		@ FCSE/PID
-	mcr	p15, 0, r5, c3, c0, 0		@ Domain ID
-
-	mcr	p15, 0, r8, c2, c0, 2		@ Translation Table Control
-	mcr	p15, 0, r7, c2, c0, 1		@ Translation Table BASE1
-	mcr	p15, 0, r6, c2, c0, 0		@ Translation Table BASE0
-
-	mcr	p15, 0, r10, c1, c0, 1		@ Auxiliary control register
-
-	mov	r0, #0
-	mcr	p15, 0, r0, c8, c7, 0		@ Invalidate I & D TLB
-
-	mov	r0, #0				@ restore copro access
-	mcr	p15, 0, r11, c1, c0, 2		@ Co-processor access
-	mcr 	p15, 0, r0, c7, c5, 4
-
-	mcr	p15, 0, r12, c10, c2, 0		@ write PRRR
-	mcr	p15, 0, r3, c10, c2, 1		@ write NMRR
-
-	/*
-	 * In Cortex-A8, when MMU is turned on, the pipeline is flushed.
-	 * And there are no valid entries in the MMU table at this point.
-	 * So before turning on the MMU, the MMU entry for the DRAM address
-	 * range is added. After the MMU is turned on, the other entries
-	 * in the MMU table will be restored.
-	*/
-
-	/* r6 = Translation Table BASE0 */
-	mov	r4, r6
-	mov	r4, r4, LSR #14
-	mov	r4, r4, LSL #14
-
-	/* Load address for adding to MMU table list */
-	ldr	r11, =0xE010F000		@ INFORM0 reg.
-	ldr	r10, [r11, #0]
-	mov	r10, r10, LSR #18
-	bic	r10, r10, #0x3
-	orr	r4, r4, r10
-
-	/* Calculate MMU table entry */
-	mov 	r10, r10, LSL #18
-	ldr	r5, =0x40E
-	orr	r10, r10, r5
-
-	/* Back up originally data */
-	ldr	r12, [r4]
-
-	/* Add calculated MMU table entry into MMU table list */
-	str	r10, [r4]
-
-	ldr	r2, =resume_with_mmu
-	mcr	p15, 0, r9, c1, c0, 0		@ turn on MMU, etc
-
-	nop
-	nop
-	nop
-	nop
-	nop					@ second-to-last before mmu
-
-	mov	pc, r2				@ go back to virtual address
-
-	.ltorg
+	b	cpu_resume