diff options
Diffstat (limited to 'arch/arm/plat-mxc')
33 files changed, 193 insertions, 619 deletions
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index a1387875a491..d53c35fe2ea7 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := clock.o gpio.o time.o devices.o cpu.o system.o irq-common.o +obj-y := clock.o time.o devices.o cpu.o system.o irq-common.o # MX51 uses the TZIC interrupt controller, older platforms use AVIC obj-$(CONFIG_MXC_TZIC) += tzic.o diff --git a/arch/arm/plat-mxc/avic.c b/arch/arm/plat-mxc/avic.c index 09e2bd0fcdca..55d2534ec727 100644 --- a/arch/arm/plat-mxc/avic.c +++ b/arch/arm/plat-mxc/avic.c @@ -46,6 +46,8 @@ #define AVIC_FIPNDH 0x60 /* fast int pending high */ #define AVIC_FIPNDL 0x64 /* fast int pending low */ +#define AVIC_NUM_IRQS 64 + void __iomem *avic_base; #ifdef CONFIG_MXC_IRQ_PRIOR @@ -54,7 +56,7 @@ static int avic_irq_set_priority(unsigned char irq, unsigned char prio) unsigned int temp; unsigned int mask = 0x0F << irq % 8 * 4; - if (irq >= MXC_INTERNAL_IRQS) + if (irq >= AVIC_NUM_IRQS) return -EINVAL;; temp = __raw_readl(avic_base + AVIC_NIPRIORITY(irq / 8)); @@ -72,14 +74,14 @@ static int avic_set_irq_fiq(unsigned int irq, unsigned int type) { unsigned int irqt; - if (irq >= MXC_INTERNAL_IRQS) + if (irq >= AVIC_NUM_IRQS) return -EINVAL; - if (irq < MXC_INTERNAL_IRQS / 2) { + if (irq < AVIC_NUM_IRQS / 2) { irqt = __raw_readl(avic_base + AVIC_INTTYPEL) & ~(1 << irq); __raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEL); } else { - irq -= MXC_INTERNAL_IRQS / 2; + irq -= AVIC_NUM_IRQS / 2; irqt = __raw_readl(avic_base + AVIC_INTTYPEH) & ~(1 << irq); __raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEH); } @@ -138,7 +140,7 @@ void __init mxc_init_irq(void __iomem *irqbase) /* all IRQ no FIQ */ __raw_writel(0, avic_base + AVIC_INTTYPEH); __raw_writel(0, avic_base + AVIC_INTTYPEL); - for (i = 0; i < MXC_INTERNAL_IRQS; i++) { + for (i = 0; i < AVIC_NUM_IRQS; i++) { irq_set_chip_and_handler(i, &mxc_avic_chip.base, handle_level_irq); set_irq_flags(i, IRQF_VALID); diff --git a/arch/arm/plat-mxc/devices.c b/arch/arm/plat-mxc/devices.c index eee1b6096a08..fb166b20f60f 100644 --- a/arch/arm/plat-mxc/devices.c +++ b/arch/arm/plat-mxc/devices.c @@ -89,3 +89,14 @@ err: return pdev; } + +struct device mxc_aips_bus = { + .init_name = "mxc_aips", + .parent = &platform_bus, +}; + +static int __init mxc_device_init(void) +{ + return device_register(&mxc_aips_bus); +} +core_initcall(mxc_device_init); diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile index ad2922acf480..b41bf972b54b 100644 --- a/arch/arm/plat-mxc/devices/Makefile +++ b/arch/arm/plat-mxc/devices/Makefile @@ -2,6 +2,7 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_FEC) += platform-fec.o obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o obj-$(CONFIG_IMX_HAVE_PLATFORM_FSL_USB2_UDC) += platform-fsl-usb2-udc.o obj-$(CONFIG_IMX_HAVE_PLATFORM_GPIO_KEYS) += platform-gpio_keys.o +obj-y += platform-gpio-mxc.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX21_HCD) += platform-imx21-hcd.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT) += platform-imx2-wdt.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMXDI_RTC) += platform-imxdi_rtc.o diff --git a/arch/arm/plat-mxc/devices/platform-fec.c b/arch/arm/plat-mxc/devices/platform-fec.c index ccc789e21daa..4fc6ffc2a13e 100644 --- a/arch/arm/plat-mxc/devices/platform-fec.c +++ b/arch/arm/plat-mxc/devices/platform-fec.c @@ -6,6 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ +#include <linux/dma-mapping.h> #include <asm/sizes.h> #include <mach/hardware.h> #include <mach/devices-common.h> diff --git a/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c b/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c index 59c33f6e401c..23ce08e6ffd2 100644 --- a/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c +++ b/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c @@ -6,6 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ +#include <linux/dma-mapping.h> #include <mach/hardware.h> #include <mach/devices-common.h> diff --git a/arch/arm/plat-mxc/devices/platform-gpio-mxc.c b/arch/arm/plat-mxc/devices/platform-gpio-mxc.c new file mode 100644 index 000000000000..a7919a241032 --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-gpio-mxc.c @@ -0,0 +1,32 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2011 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/devices-common.h> + +struct platform_device *__init mxc_register_gpio(char *name, int id, + resource_size_t iobase, resource_size_t iosize, int irq, int irq_high) +{ + struct resource res[] = { + { + .start = iobase, + .end = iobase + iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = irq, + .end = irq, + .flags = IORESOURCE_IRQ, + }, { + .start = irq_high, + .end = irq_high, + .flags = IORESOURCE_IRQ, + }, + }; + + return platform_device_register_resndata(&mxc_aips_bus, + name, id, res, ARRAY_SIZE(res), NULL, 0); +} diff --git a/arch/arm/plat-mxc/devices/platform-imx-dma.c b/arch/arm/plat-mxc/devices/platform-imx-dma.c index b130f60ca6b7..c64f015e031b 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-dma.c +++ b/arch/arm/plat-mxc/devices/platform-imx-dma.c @@ -33,22 +33,22 @@ struct imx_imx_sdma_data { #ifdef CONFIG_SOC_IMX25 struct imx_imx_sdma_data imx25_imx_sdma_data __initconst = - imx_imx_sdma_data_entry_single(MX25, 1, "imx25", 0); + imx_imx_sdma_data_entry_single(MX25, 2, "imx25", 1); #endif /* ifdef CONFIG_SOC_IMX25 */ #ifdef CONFIG_SOC_IMX31 struct imx_imx_sdma_data imx31_imx_sdma_data __initdata = - imx_imx_sdma_data_entry_single(MX31, 1, "imx31", 0); + imx_imx_sdma_data_entry_single(MX31, 1, "imx31", 1); #endif /* ifdef CONFIG_SOC_IMX31 */ #ifdef CONFIG_SOC_IMX35 struct imx_imx_sdma_data imx35_imx_sdma_data __initdata = - imx_imx_sdma_data_entry_single(MX35, 2, "imx35", 0); + imx_imx_sdma_data_entry_single(MX35, 2, "imx35", 1); #endif /* ifdef CONFIG_SOC_IMX35 */ #ifdef CONFIG_SOC_IMX51 struct imx_imx_sdma_data imx51_imx_sdma_data __initconst = - imx_imx_sdma_data_entry_single(MX51, 2, "imx51", 0); + imx_imx_sdma_data_entry_single(MX51, 2, "imx51", 1); #endif /* ifdef CONFIG_SOC_IMX51 */ static struct platform_device __init __maybe_unused *imx_add_imx_sdma( @@ -57,7 +57,7 @@ static struct platform_device __init __maybe_unused *imx_add_imx_sdma( struct resource res[] = { { .start = data->iobase, - .end = data->iobase + SZ_4K - 1, + .end = data->iobase + SZ_16K - 1, .flags = IORESOURCE_MEM, }, { .start = data->irq, @@ -77,7 +77,7 @@ static struct platform_device __init __maybe_unused *imx_add_imx_dma(void) } #ifdef CONFIG_ARCH_MX25 -static struct sdma_script_start_addrs addr_imx25_to1 = { +static struct sdma_script_start_addrs addr_imx25 = { .ap_2_ap_addr = 729, .uart_2_mcu_addr = 904, .per_2_app_addr = 1255, @@ -165,7 +165,7 @@ static int __init imxXX_add_imx_dma(void) #if defined(CONFIG_SOC_IMX25) if (cpu_is_mx25()) { - imx25_imx_sdma_data.pdata.script_addrs = &addr_imx25_to1; + imx25_imx_sdma_data.pdata.script_addrs = &addr_imx25; ret = imx_add_imx_sdma(&imx25_imx_sdma_data); } else #endif diff --git a/arch/arm/plat-mxc/devices/platform-imx-fb.c b/arch/arm/plat-mxc/devices/platform-imx-fb.c index 79a1cb18a5b0..2b0b5e0aa998 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-fb.c +++ b/arch/arm/plat-mxc/devices/platform-imx-fb.c @@ -6,6 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ +#include <linux/dma-mapping.h> #include <mach/hardware.h> #include <mach/devices-common.h> diff --git a/arch/arm/plat-mxc/devices/platform-imx-ssi.c b/arch/arm/plat-mxc/devices/platform-imx-ssi.c index 2569c8d8a2ef..66b8593e9b69 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-ssi.c +++ b/arch/arm/plat-mxc/devices/platform-imx-ssi.c @@ -69,7 +69,7 @@ const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst = { #ifdef CONFIG_SOC_IMX51 const struct imx_imx_ssi_data imx51_imx_ssi_data[] __initconst = { #define imx51_imx_ssi_data_entry(_id, _hwid) \ - imx_imx_ssi_data_entry(MX51, _id, _hwid, SZ_4K) + imx_imx_ssi_data_entry(MX51, _id, _hwid, SZ_16K) imx51_imx_ssi_data_entry(0, 1), imx51_imx_ssi_data_entry(1, 2), imx51_imx_ssi_data_entry(2, 3), diff --git a/arch/arm/plat-mxc/devices/platform-ipu-core.c b/arch/arm/plat-mxc/devices/platform-ipu-core.c index edf65034aea5..79d340ae0af1 100644 --- a/arch/arm/plat-mxc/devices/platform-ipu-core.c +++ b/arch/arm/plat-mxc/devices/platform-ipu-core.c @@ -6,6 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ +#include <linux/dma-mapping.h> #include <mach/hardware.h> #include <mach/devices-common.h> diff --git a/arch/arm/plat-mxc/devices/platform-mxc-ehci.c b/arch/arm/plat-mxc/devices/platform-mxc-ehci.c index cc488f4b6204..e1763e03e7cb 100644 --- a/arch/arm/plat-mxc/devices/platform-mxc-ehci.c +++ b/arch/arm/plat-mxc/devices/platform-mxc-ehci.c @@ -6,6 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ +#include <linux/dma-mapping.h> #include <mach/hardware.h> #include <mach/devices-common.h> diff --git a/arch/arm/plat-mxc/devices/platform-mxc-mmc.c b/arch/arm/plat-mxc/devices/platform-mxc-mmc.c index 90d762f6f93b..540d3a7d92df 100644 --- a/arch/arm/plat-mxc/devices/platform-mxc-mmc.c +++ b/arch/arm/plat-mxc/devices/platform-mxc-mmc.c @@ -6,6 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ +#include <linux/dma-mapping.h> #include <mach/hardware.h> #include <mach/devices-common.h> diff --git a/arch/arm/plat-mxc/devices/platform-spi_imx.c b/arch/arm/plat-mxc/devices/platform-spi_imx.c index f97eb3615b2c..9bfae8bd5b8d 100644 --- a/arch/arm/plat-mxc/devices/platform-spi_imx.c +++ b/arch/arm/plat-mxc/devices/platform-spi_imx.c @@ -40,9 +40,10 @@ const struct imx_spi_imx_data imx21_cspi_data[] __initconst = { #endif #ifdef CONFIG_SOC_IMX25 +/* i.mx25 has the i.mx35 type cspi */ const struct imx_spi_imx_data imx25_cspi_data[] __initconst = { #define imx25_cspi_data_entry(_id, _hwid) \ - imx_spi_imx_data_entry(MX25, CSPI, "imx25-cspi", _id, _hwid, SZ_16K) + imx_spi_imx_data_entry(MX25, CSPI, "imx35-cspi", _id, _hwid, SZ_16K) imx25_cspi_data_entry(0, 1), imx25_cspi_data_entry(1, 2), imx25_cspi_data_entry(2, 3), @@ -79,8 +80,9 @@ const struct imx_spi_imx_data imx35_cspi_data[] __initconst = { #endif /* ifdef CONFIG_SOC_IMX35 */ #ifdef CONFIG_SOC_IMX51 +/* i.mx51 has the i.mx35 type cspi */ const struct imx_spi_imx_data imx51_cspi_data __initconst = - imx_spi_imx_data_entry_single(MX51, CSPI, "imx51-cspi", 2, , SZ_4K); + imx_spi_imx_data_entry_single(MX51, CSPI, "imx35-cspi", 2, , SZ_4K); const struct imx_spi_imx_data imx51_ecspi_data[] __initconst = { #define imx51_ecspi_data_entry(_id, _hwid) \ @@ -91,12 +93,14 @@ const struct imx_spi_imx_data imx51_ecspi_data[] __initconst = { #endif /* ifdef CONFIG_SOC_IMX51 */ #ifdef CONFIG_SOC_IMX53 +/* i.mx53 has the i.mx35 type cspi */ const struct imx_spi_imx_data imx53_cspi_data __initconst = - imx_spi_imx_data_entry_single(MX53, CSPI, "imx53-cspi", 0, , SZ_4K); + imx_spi_imx_data_entry_single(MX53, CSPI, "imx35-cspi", 0, , SZ_4K); +/* i.mx53 has the i.mx51 type ecspi */ const struct imx_spi_imx_data imx53_ecspi_data[] __initconst = { #define imx53_ecspi_data_entry(_id, _hwid) \ - imx_spi_imx_data_entry(MX53, ECSPI, "imx53-ecspi", _id, _hwid, SZ_4K) + imx_spi_imx_data_entry(MX53, ECSPI, "imx51-ecspi", _id, _hwid, SZ_4K) imx53_ecspi_data_entry(0, 1), imx53_ecspi_data_entry(1, 2), }; diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c deleted file mode 100644 index 6cd6d7f686f6..000000000000 --- a/arch/arm/plat-mxc/gpio.c +++ /dev/null @@ -1,361 +0,0 @@ -/* - * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de> - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * Based on code from Freescale, - * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - */ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/gpio.h> -#include <mach/hardware.h> -#include <asm-generic/bug.h> - -static struct mxc_gpio_port *mxc_gpio_ports; -static int gpio_table_size; - -#define cpu_is_mx1_mx2() (cpu_is_mx1() || cpu_is_mx2()) - -#define GPIO_DR (cpu_is_mx1_mx2() ? 0x1c : 0x00) -#define GPIO_GDIR (cpu_is_mx1_mx2() ? 0x00 : 0x04) -#define GPIO_PSR (cpu_is_mx1_mx2() ? 0x24 : 0x08) -#define GPIO_ICR1 (cpu_is_mx1_mx2() ? 0x28 : 0x0C) -#define GPIO_ICR2 (cpu_is_mx1_mx2() ? 0x2C : 0x10) -#define GPIO_IMR (cpu_is_mx1_mx2() ? 0x30 : 0x14) -#define GPIO_ISR (cpu_is_mx1_mx2() ? 0x34 : 0x18) - -#define GPIO_INT_LOW_LEV (cpu_is_mx1_mx2() ? 0x3 : 0x0) -#define GPIO_INT_HIGH_LEV (cpu_is_mx1_mx2() ? 0x2 : 0x1) -#define GPIO_INT_RISE_EDGE (cpu_is_mx1_mx2() ? 0x0 : 0x2) -#define GPIO_INT_FALL_EDGE (cpu_is_mx1_mx2() ? 0x1 : 0x3) -#define GPIO_INT_NONE 0x4 - -/* Note: This driver assumes 32 GPIOs are handled in one register */ - -static void _clear_gpio_irqstatus(struct mxc_gpio_port *port, u32 index) -{ - __raw_writel(1 << index, port->base + GPIO_ISR); -} - -static void _set_gpio_irqenable(struct mxc_gpio_port *port, u32 index, - int enable) -{ - u32 l; - - l = __raw_readl(port->base + GPIO_IMR); - l = (l & (~(1 << index))) | (!!enable << index); - __raw_writel(l, port->base + GPIO_IMR); -} - -static void gpio_ack_irq(struct irq_data *d) -{ - u32 gpio = irq_to_gpio(d->irq); - _clear_gpio_irqstatus(&mxc_gpio_ports[gpio / 32], gpio & 0x1f); -} - -static void gpio_mask_irq(struct irq_data *d) -{ - u32 gpio = irq_to_gpio(d->irq); - _set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 0); -} - -static void gpio_unmask_irq(struct irq_data *d) -{ - u32 gpio = irq_to_gpio(d->irq); - _set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 1); -} - -static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset); - -static int gpio_set_irq_type(struct irq_data *d, u32 type) -{ - u32 gpio = irq_to_gpio(d->irq); - struct mxc_gpio_port *port = &mxc_gpio_ports[gpio / 32]; - u32 bit, val; - int edge; - void __iomem *reg = port->base; - - port->both_edges &= ~(1 << (gpio & 31)); - switch (type) { - case IRQ_TYPE_EDGE_RISING: - edge = GPIO_INT_RISE_EDGE; - break; - case IRQ_TYPE_EDGE_FALLING: - edge = GPIO_INT_FALL_EDGE; - break; - case IRQ_TYPE_EDGE_BOTH: - val = mxc_gpio_get(&port->chip, gpio & 31); - if (val) { - edge = GPIO_INT_LOW_LEV; - pr_debug("mxc: set GPIO %d to low trigger\n", gpio); - } else { - edge = GPIO_INT_HIGH_LEV; - pr_debug("mxc: set GPIO %d to high trigger\n", gpio); - } - port->both_edges |= 1 << (gpio & 31); - break; - case IRQ_TYPE_LEVEL_LOW: - edge = GPIO_INT_LOW_LEV; - break; - case IRQ_TYPE_LEVEL_HIGH: - edge = GPIO_INT_HIGH_LEV; - break; - default: - return -EINVAL; - } - - reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */ - bit = gpio & 0xf; - val = __raw_readl(reg) & ~(0x3 << (bit << 1)); - __raw_writel(val | (edge << (bit << 1)), reg); - _clear_gpio_irqstatus(port, gpio & 0x1f); - - return 0; -} - -static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio) -{ - void __iomem *reg = port->base; - u32 bit, val; - int edge; - - reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */ - bit = gpio & 0xf; - val = __raw_readl(reg); - edge = (val >> (bit << 1)) & 3; - val &= ~(0x3 << (bit << 1)); - if (edge == GPIO_INT_HIGH_LEV) { - edge = GPIO_INT_LOW_LEV; - pr_debug("mxc: switch GPIO %d to low trigger\n", gpio); - } else if (edge == GPIO_INT_LOW_LEV) { - edge = GPIO_INT_HIGH_LEV; - pr_debug("mxc: switch GPIO %d to high trigger\n", gpio); - } else { - pr_err("mxc: invalid configuration for GPIO %d: %x\n", - gpio, edge); - return; - } - __raw_writel(val | (edge << (bit << 1)), reg); -} - -/* handle 32 interrupts in one status register */ -static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat) -{ - u32 gpio_irq_no_base = port->virtual_irq_start; - - while (irq_stat != 0) { - int irqoffset = fls(irq_stat) - 1; - - if (port->both_edges & (1 << irqoffset)) - mxc_flip_edge(port, irqoffset); - - generic_handle_irq(gpio_irq_no_base + irqoffset); - - irq_stat &= ~(1 << irqoffset); - } -} - -/* MX1 and MX3 has one interrupt *per* gpio port */ -static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc) -{ - u32 irq_stat; - struct mxc_gpio_port *port = irq_get_handler_data(irq); - - irq_stat = __raw_readl(port->base + GPIO_ISR) & - __raw_readl(port->base + GPIO_IMR); - - mxc_gpio_irq_handler(port, irq_stat); -} - -/* MX2 has one interrupt *for all* gpio ports */ -static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc) -{ - int i; - u32 irq_msk, irq_stat; - struct mxc_gpio_port *port = irq_get_handler_data(irq); - - /* walk through all interrupt status registers */ - for (i = 0; i < gpio_table_size; i++) { - irq_msk = __raw_readl(port[i].base + GPIO_IMR); - if (!irq_msk) - continue; - - irq_stat = __raw_readl(port[i].base + GPIO_ISR) & irq_msk; - if (irq_stat) - mxc_gpio_irq_handler(&port[i], irq_stat); - } -} - -/* - * Set interrupt number "irq" in the GPIO as a wake-up source. - * While system is running, all registered GPIO interrupts need to have - * wake-up enabled. When system is suspended, only selected GPIO interrupts - * need to have wake-up enabled. - * @param irq interrupt source number - * @param enable enable as wake-up if equal to non-zero - * @return This function returns 0 on success. - */ -static int gpio_set_wake_irq(struct irq_data *d, u32 enable) -{ - u32 gpio = irq_to_gpio(d->irq); - u32 gpio_idx = gpio & 0x1F; - struct mxc_gpio_port *port = &mxc_gpio_ports[gpio / 32]; - - if (enable) { - if (port->irq_high && (gpio_idx >= 16)) - enable_irq_wake(port->irq_high); - else - enable_irq_wake(port->irq); - } else { - if (port->irq_high && (gpio_idx >= 16)) - disable_irq_wake(port->irq_high); - else - disable_irq_wake(port->irq); - } - - return 0; -} - -static struct irq_chip gpio_irq_chip = { - .name = "GPIO", - .irq_ack = gpio_ack_irq, - .irq_mask = gpio_mask_irq, - .irq_unmask = gpio_unmask_irq, - .irq_set_type = gpio_set_irq_type, - .irq_set_wake = gpio_set_wake_irq, -}; - -static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset, - int dir) -{ - struct mxc_gpio_port *port = - container_of(chip, struct mxc_gpio_port, chip); - u32 l; - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - l = __raw_readl(port->base + GPIO_GDIR); - if (dir) - l |= 1 << offset; - else - l &= ~(1 << offset); - __raw_writel(l, port->base + GPIO_GDIR); - spin_unlock_irqrestore(&port->lock, flags); -} - -static void mxc_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - struct mxc_gpio_port *port = - container_of(chip, struct mxc_gpio_port, chip); - void __iomem *reg = port->base + GPIO_DR; - u32 l; - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - l = (__raw_readl(reg) & (~(1 << offset))) | (!!value << offset); - __raw_writel(l, reg); - spin_unlock_irqrestore(&port->lock, flags); -} - -static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct mxc_gpio_port *port = - container_of(chip, struct mxc_gpio_port, chip); - - return (__raw_readl(port->base + GPIO_PSR) >> offset) & 1; -} - -static int mxc_gpio_direction_input(struct gpio_chip *chip, unsigned offset) -{ - _set_gpio_direction(chip, offset, 0); - return 0; -} - -static int mxc_gpio_direction_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - mxc_gpio_set(chip, offset, value); - _set_gpio_direction(chip, offset, 1); - return 0; -} - -/* - * This lock class tells lockdep that GPIO irqs are in a different - * category than their parents, so it won't report false recursion. - */ -static struct lock_class_key gpio_lock_class; - -int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt) -{ - int i, j; - - /* save for local usage */ - mxc_gpio_ports = port; - gpio_table_size = cnt; - - printk(KERN_INFO "MXC GPIO hardware\n"); - - for (i = 0; i < cnt; i++) { - /* disable the interrupt and clear the status */ - __raw_writel(0, port[i].base + GPIO_IMR); - __raw_writel(~0, port[i].base + GPIO_ISR); - for (j = port[i].virtual_irq_start; - j < port[i].virtual_irq_start + 32; j++) { - irq_set_lockdep_class(j, &gpio_lock_class); - irq_set_chip_and_handler(j, &gpio_irq_chip, - handle_level_irq); - set_irq_flags(j, IRQF_VALID); - } - - /* register gpio chip */ - port[i].chip.direction_input = mxc_gpio_direction_input; - port[i].chip.direction_output = mxc_gpio_direction_output; - port[i].chip.get = mxc_gpio_get; - port[i].chip.set = mxc_gpio_set; - port[i].chip.base = i * 32; - port[i].chip.ngpio = 32; - - spin_lock_init(&port[i].lock); - - /* its a serious configuration bug when it fails */ - BUG_ON( gpiochip_add(&port[i].chip) < 0 ); - - if (cpu_is_mx1() || cpu_is_mx3() || cpu_is_mx25() || cpu_is_mx51()) { - /* setup one handler for each entry */ - irq_set_chained_handler(port[i].irq, - mx3_gpio_irq_handler); - irq_set_handler_data(port[i].irq, &port[i]); - if (port[i].irq_high) { - /* setup handler for GPIO 16 to 31 */ - irq_set_chained_handler(port[i].irq_high, - mx3_gpio_irq_handler); - irq_set_handler_data(port[i].irq_high, - &port[i]); - } - } - } - - if (cpu_is_mx2()) { - /* setup one handler for all GPIO interrupts */ - irq_set_chained_handler(port[0].irq, mx2_gpio_irq_handler); - irq_set_handler_data(port[0].irq, port); - } - - return 0; -} diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index da7991832af6..4e3d97890d69 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -43,6 +43,15 @@ extern void mx35_init_irq(void); extern void mx50_init_irq(void); extern void mx51_init_irq(void); extern void mx53_init_irq(void); +extern void imx1_soc_init(void); +extern void imx21_soc_init(void); +extern void imx25_soc_init(void); +extern void imx27_soc_init(void); +extern void imx31_soc_init(void); +extern void imx35_soc_init(void); +extern void imx50_soc_init(void); +extern void imx51_soc_init(void); +extern void imx53_soc_init(void); extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq); extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int); extern int mx1_clocks_init(unsigned long fref); @@ -55,7 +64,8 @@ extern int mx51_clocks_init(unsigned long ckil, unsigned long osc, unsigned long ckih1, unsigned long ckih2); extern int mx53_clocks_init(unsigned long ckil, unsigned long osc, unsigned long ckih1, unsigned long ckih2); -extern int mxc_register_gpios(void); +extern struct platform_device *mxc_register_gpio(char *name, int id, + resource_size_t iobase, resource_size_t iosize, int irq, int irq_high); extern int mxc_register_device(struct platform_device *pdev, void *data); extern void mxc_set_cpu_type(unsigned int type); extern void mxc_arch_reset_init(void __iomem *); diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S index 8e8d175e5077..91fc7cdb5dc9 100644 --- a/arch/arm/plat-mxc/include/mach/debug-macro.S +++ b/arch/arm/plat-mxc/include/mach/debug-macro.S @@ -12,32 +12,32 @@ */ #include <mach/hardware.h> -#ifdef CONFIG_ARCH_MX1 +#ifdef CONFIG_SOC_IMX1 #define UART_PADDR MX1_UART1_BASE_ADDR #endif -#ifdef CONFIG_ARCH_MX25 +#ifdef CONFIG_SOC_IMX25 #ifdef UART_PADDR #error "CONFIG_DEBUG_LL is incompatible with multiple archs" #endif #define UART_PADDR MX25_UART1_BASE_ADDR #endif -#ifdef CONFIG_ARCH_MX2 +#if defined(CONFIG_SOC_IMX21) || defined (CONFIG_SOC_IMX27) #ifdef UART_PADDR #error "CONFIG_DEBUG_LL is incompatible with multiple archs" #endif #define UART_PADDR MX2x_UART1_BASE_ADDR #endif -#ifdef CONFIG_ARCH_MX3 +#if defined(CONFIG_SOC_IMX31) || defined(CONFIG_SOC_IMX35) #ifdef UART_PADDR #error "CONFIG_DEBUG_LL is incompatible with multiple archs" #endif #define UART_PADDR MX3x_UART1_BASE_ADDR #endif -#ifdef CONFIG_ARCH_MX5 +#ifdef CONFIG_SOC_IMX51 #ifdef UART_PADDR #error "CONFIG_DEBUG_LL is incompatible with multiple archs" #endif diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h index fa8477337f91..03f626645374 100644 --- a/arch/arm/plat-mxc/include/mach/devices-common.h +++ b/arch/arm/plat-mxc/include/mach/devices-common.h @@ -10,6 +10,8 @@ #include <linux/platform_device.h> #include <linux/init.h> +extern struct device mxc_aips_bus; + struct platform_device *imx_add_platform_device_dmamask( const char *name, int id, const struct resource *res, unsigned int num_resources, diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S index 2e49e71b1b98..066d464d322d 100644 --- a/arch/arm/plat-mxc/include/mach/entry-macro.S +++ b/arch/arm/plat-mxc/include/mach/entry-macro.S @@ -78,7 +78,3 @@ movs \irqnr, \irqnr #endif .endm - - @ irq priority table (not used) - .macro irq_prio_table - .endm diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h index a2747f12813e..31c820c1b796 100644 --- a/arch/arm/plat-mxc/include/mach/gpio.h +++ b/arch/arm/plat-mxc/include/mach/gpio.h @@ -36,31 +36,4 @@ #define gpio_to_irq(gpio) (MXC_GPIO_IRQ_START + (gpio)) #define irq_to_gpio(irq) ((irq) - MXC_GPIO_IRQ_START) -struct mxc_gpio_port { - void __iomem *base; - int irq; - int irq_high; - int virtual_irq_start; - struct gpio_chip chip; - u32 both_edges; - spinlock_t lock; -}; - -#define DEFINE_IMX_GPIO_PORT_IRQ_HIGH(soc, _id, _hwid, _irq, _irq_high) \ - { \ - .chip.label = "gpio-" #_id, \ - .irq = _irq, \ - .irq_high = _irq_high, \ - .base = soc ## _IO_ADDRESS( \ - soc ## _GPIO ## _hwid ## _BASE_ADDR), \ - .virtual_irq_start = MXC_GPIO_IRQ_START + (_id) * 32, \ - } - -#define DEFINE_IMX_GPIO_PORT_IRQ(soc, _id, _hwid, _irq) \ - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(soc, _id, _hwid, _irq, 0) -#define DEFINE_IMX_GPIO_PORT(soc, _id, _hwid) \ - DEFINE_IMX_GPIO_PORT_IRQ(soc, _id, _hwid, 0) - -int mxc_gpio_init(struct mxc_gpio_port*, int); - #endif diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h index 67d3e2bed065..a8bfd565dcad 100644 --- a/arch/arm/plat-mxc/include/mach/hardware.h +++ b/arch/arm/plat-mxc/include/mach/hardware.h @@ -97,35 +97,17 @@ #include <mach/mxc.h> -#ifdef CONFIG_ARCH_MX5 #include <mach/mx50.h> #include <mach/mx51.h> #include <mach/mx53.h> -#endif - -#ifdef CONFIG_ARCH_MX3 #include <mach/mx3x.h> #include <mach/mx31.h> #include <mach/mx35.h> -#endif - -#ifdef CONFIG_ARCH_MX2 -# include <mach/mx2x.h> -# ifdef CONFIG_MACH_MX21 -# include <mach/mx21.h> -# endif -# ifdef CONFIG_MACH_MX27 -# include <mach/mx27.h> -# endif -#endif - -#ifdef CONFIG_ARCH_MX1 -# include <mach/mx1.h> -#endif - -#ifdef CONFIG_ARCH_MX25 -# include <mach/mx25.h> -#endif +#include <mach/mx2x.h> +#include <mach/mx21.h> +#include <mach/mx27.h> +#include <mach/mx1.h> +#include <mach/mx25.h> #define imx_map_entry(soc, name, _type) { \ .virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR), \ diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/arch/arm/plat-mxc/include/mach/iomux-mx25.h index 2e5244de7ff5..bf64e1e594ed 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx25.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx25.h @@ -457,7 +457,7 @@ #define MX25_PAD_GPIO_A__USBOTG_PWR IOMUX_PAD(0x3f0, 0x1f4, 0x12, 0, 0, PAD_CTL_PKE) #define MX25_PAD_GPIO_B__GPIO_B IOMUX_PAD(0x3f4, 0x1f8, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_GPIO_B__CAN1_RX IOMUX_PAD(0x3f4, 0x1f8, 0x16, 0x480, 1, PAD_CTL_PUS_22K) +#define MX25_PAD_GPIO_B__CAN1_RX IOMUX_PAD(0x3f4, 0x1f8, 0x16, 0x480, 1, PAD_CTL_PUS_22K_UP) #define MX25_PAD_GPIO_B__USBOTG_OC IOMUX_PAD(0x3f4, 0x1f8, 0x12, 0x57c, 1, PAD_CTL_PUS_100K_UP) #define MX25_PAD_GPIO_C__GPIO_C IOMUX_PAD(0x3f8, 0x1fc, 0x10, 0, 0, NO_PAD_CTRL) diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx53.h b/arch/arm/plat-mxc/include/mach/iomux-mx53.h index e95d9cb8aeb7..9440b9e00e89 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx53.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx53.h @@ -39,10 +39,10 @@ #define _MX53_PAD_GPIO_19__ECSPI1_RDY IOMUX_PAD(0x348, 0x20, 5, 0x0, 0, 0) #define _MX53_PAD_GPIO_19__FEC_TDATA_3 IOMUX_PAD(0x348, 0x20, 6, 0x0, 0, 0) #define _MX53_PAD_GPIO_19__SRC_INT_BOOT IOMUX_PAD(0x348, 0x20,7, 0x0, 0, 0) -#define _MX53_PAD_KEY_COL0__KPP_COL_0 IOMUX_PAD(0x34C, 0x24, o, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL0__KPP_COL_0 IOMUX_PAD(0x34C, 0x24, 0, 0x0, 0, 0) #define _MX53_PAD_KEY_COL0__GPIO4_6 IOMUX_PAD(0x34C, 0x24, 1, 0x0, 0, 0) #define _MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC IOMUX_PAD(0x34C, 0x24, 2, 0x758, 0, 0) -#define _MX53_PAD_KEY_COL0__UART4_TXD_MUX IOMUX_PAD(0x34C, 0x24, 4, 0x890, 0, 0) +#define _MX53_PAD_KEY_COL0__UART4_TXD_MUX IOMUX_PAD(0x34C, 0x24, 4, 0x0, 0, 0) #define _MX53_PAD_KEY_COL0__ECSPI1_SCLK IOMUX_PAD(0x34C, 0x24, 5, 0x79C, 0, 0) #define _MX53_PAD_KEY_COL0__FEC_RDATA_3 IOMUX_PAD(0x34C, 0x24, 6, 0x0, 0, 0) #define _MX53_PAD_KEY_COL0__SRC_ANY_PU_RST IOMUX_PAD(0x34C, 0x24, 7, 0x0, 0, 0) @@ -55,7 +55,7 @@ #define _MX53_PAD_KEY_COL1__KPP_COL_1 IOMUX_PAD(0x354, 0x2C, 0, 0x0, 0, 0) #define _MX53_PAD_KEY_COL1__GPIO4_8 IOMUX_PAD(0x354, 0x2C, 1, 0x0, 0, 0) #define _MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS IOMUX_PAD(0x354, 0x2C, 2, 0x75C, 0, 0) -#define _MX53_PAD_KEY_COL1__UART5_TXD_MUX IOMUX_PAD(0x354, 0x2C, 4, 0x898, 0, 0) +#define _MX53_PAD_KEY_COL1__UART5_TXD_MUX IOMUX_PAD(0x354, 0x2C, 4, 0x0, 0, 0) #define _MX53_PAD_KEY_COL1__ECSPI1_MISO IOMUX_PAD(0x354, 0x2C, 5, 0x7A0, 0, 0) #define _MX53_PAD_KEY_COL1__FEC_RX_CLK IOMUX_PAD(0x354, 0x2C, 6, 0x808, 0, 0) #define _MX53_PAD_KEY_COL1__USBPHY1_TXREADY IOMUX_PAD(0x354, 0x2C, 7, 0x0, 0, 0) @@ -107,7 +107,7 @@ #define _MX53_PAD_KEY_ROW4__GPIO4_15 IOMUX_PAD(0x370, 0x48, 1, 0x0, 0, 0) #define _MX53_PAD_KEY_ROW4__CAN2_RXCAN IOMUX_PAD(0x370, 0x48, 2, 0x764, 0, 0) #define _MX53_PAD_KEY_ROW4__IPU_SISG_5 IOMUX_PAD(0x370, 0x48, 3, 0x0, 0, 0) -#define _MX53_PAD_KEY_ROW4__UART5_CTS IOMUX_PAD(0x370, 0x48, 4, 0x894, 1, 0) +#define _MX53_PAD_KEY_ROW4__UART5_CTS IOMUX_PAD(0x370, 0x48, 4, 0x0, 0, 0) #define _MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR IOMUX_PAD(0x370, 0x48, 5, 0x0, 0, 0) #define _MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID IOMUX_PAD(0x370, 0x48, 7, 0x0, 0, 0) #define _MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK IOMUX_PAD(0x378, 0x4C, 0, 0x0, 0, 0) @@ -377,7 +377,7 @@ #define _MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 IOMUX_PAD(0x410, 0xE4, 7, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 IOMUX_PAD(0x414, 0xE8, 0, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT10__GPIO5_28 IOMUX_PAD(0x414, 0xE8, 1, 0x0, 0, 0) -#define _MX53_PAD_CSI0_DAT10__UART1_TXD_MUX IOMUX_PAD(0x414, 0xE8, 2, 0x878, 0, 0) +#define _MX53_PAD_CSI0_DAT10__UART1_TXD_MUX IOMUX_PAD(0x414, 0xE8, 2, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT10__ECSPI2_MISO IOMUX_PAD(0x414, 0xE8, 3, 0x7BC, 1, 0) #define _MX53_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC IOMUX_PAD(0x414, 0xE8, 4, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4 IOMUX_PAD(0x414, 0xE8, 5, 0x0, 0, 0) @@ -393,7 +393,7 @@ #define _MX53_PAD_CSI0_DAT11__TPIU_TRACE_8 IOMUX_PAD(0x418, 0xEC, 7, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 IOMUX_PAD(0x41C, 0xF0, 0, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT12__GPIO5_30 IOMUX_PAD(0x41C, 0xF0, 1, 0x0, 0, 0) -#define _MX53_PAD_CSI0_DAT12__UART4_TXD_MUX IOMUX_PAD(0x41C, 0xF0, 2, 0x890, 2, 0) +#define _MX53_PAD_CSI0_DAT12__UART4_TXD_MUX IOMUX_PAD(0x41C, 0xF0, 2, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 IOMUX_PAD(0x41C, 0xF0, 4, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6 IOMUX_PAD(0x41C, 0xF0, 5, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41 IOMUX_PAD(0x41C, 0xF0, 6, 0x0, 0, 0) @@ -407,7 +407,7 @@ #define _MX53_PAD_CSI0_DAT13__TPIU_TRACE_10 IOMUX_PAD(0x420, 0xF4, 7, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 IOMUX_PAD(0x424, 0xF8, 0, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT14__GPIO6_0 IOMUX_PAD(0x424, 0xF8, 1, 0x0, 0, 0) -#define _MX53_PAD_CSI0_DAT14__UART5_TXD_MUX IOMUX_PAD(0x424, 0xF8, 2, 0x898, 2, 0) +#define _MX53_PAD_CSI0_DAT14__UART5_TXD_MUX IOMUX_PAD(0x424, 0xF8, 2, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 IOMUX_PAD(0x424, 0xF8, 4, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8 IOMUX_PAD(0x424, 0xF8, 5, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43 IOMUX_PAD(0x424, 0xF8, 6, 0x0, 0, 0) @@ -428,7 +428,7 @@ #define _MX53_PAD_CSI0_DAT16__TPIU_TRACE_13 IOMUX_PAD(0x42C, 0x100, 7, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 IOMUX_PAD(0x430, 0x104, 0, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT17__GPIO6_3 IOMUX_PAD(0x430, 0x104, 1, 0x0, 0, 0) -#define _MX53_PAD_CSI0_DAT17__UART4_CTS IOMUX_PAD(0x430, 0x104, 2, 0x88C, 1, 0) +#define _MX53_PAD_CSI0_DAT17__UART4_CTS IOMUX_PAD(0x430, 0x104, 2, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 IOMUX_PAD(0x430, 0x104, 4, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11 IOMUX_PAD(0x430, 0x104, 5, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46 IOMUX_PAD(0x430, 0x104, 6, 0x0, 0, 0) @@ -442,7 +442,7 @@ #define _MX53_PAD_CSI0_DAT18__TPIU_TRACE_15 IOMUX_PAD(0x434, 0x108, 7, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 IOMUX_PAD(0x438, 0x10C, 0, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT19__GPIO6_5 IOMUX_PAD(0x438, 0x10C, 1, 0x0, 0, 0) -#define _MX53_PAD_CSI0_DAT19__UART5_CTS IOMUX_PAD(0x438, 0x10C, 2, 0x894, 3, 0) +#define _MX53_PAD_CSI0_DAT19__UART5_CTS IOMUX_PAD(0x438, 0x10C, 2, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 IOMUX_PAD(0x438, 0x10C, 4, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13 IOMUX_PAD(0x438, 0x10C, 5, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48 IOMUX_PAD(0x438, 0x10C, 6, 0x0, 0, 0) @@ -465,19 +465,19 @@ #define _MX53_PAD_EIM_D16__IPU_DI0_PIN5 IOMUX_PAD(0x460, 0x118, 2, 0x0, 0, 0) #define _MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK IOMUX_PAD(0x460, 0x118, 3, 0x0, 0, 0) #define _MX53_PAD_EIM_D16__ECSPI1_SCLK IOMUX_PAD(0x460, 0x118, 4, 0x79C, 3, 0) -#define _MX53_PAD_EIM_D16__I2C2_SDA IOMUX_PAD(0x460, 0x118, 5, 0x820, 1, 0) +#define _MX53_PAD_EIM_D16__I2C2_SDA IOMUX_PAD(0x460, 0x118, 5 | IOMUX_CONFIG_SION, 0x820, 1, 0) #define _MX53_PAD_EIM_D17__EMI_WEIM_D_17 IOMUX_PAD(0x464, 0x11C, 0, 0x0, 0, 0) #define _MX53_PAD_EIM_D17__GPIO3_17 IOMUX_PAD(0x464, 0x11C, 1, 0x0, 0, 0) #define _MX53_PAD_EIM_D17__IPU_DI0_PIN6 IOMUX_PAD(0x464, 0x11C, 2, 0x0, 0, 0) #define _MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN IOMUX_PAD(0x464, 0x11C, 3, 0x830, 0, 0) #define _MX53_PAD_EIM_D17__ECSPI1_MISO IOMUX_PAD(0x464, 0x11C, 4, 0x7A0, 3, 0) -#define _MX53_PAD_EIM_D17__I2C3_SCL IOMUX_PAD(0x464, 0x11C, 5, 0x824, 0, 0) +#define _MX53_PAD_EIM_D17__I2C3_SCL IOMUX_PAD(0x464, 0x11C, 5 | IOMUX_CONFIG_SION, 0x824, 0, 0) #define _MX53_PAD_EIM_D18__EMI_WEIM_D_18 IOMUX_PAD(0x468, 0x120, 0, 0x0, 0, 0) #define _MX53_PAD_EIM_D18__GPIO3_18 IOMUX_PAD(0x468, 0x120, 1, 0x0, 0, 0) #define _MX53_PAD_EIM_D18__IPU_DI0_PIN7 IOMUX_PAD(0x468, 0x120, 2, 0x0, 0, 0) #define _MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO IOMUX_PAD(0x468, 0x120, 3, 0x830, 1, 0) #define _MX53_PAD_EIM_D18__ECSPI1_MOSI IOMUX_PAD(0x468, 0x120, 4, 0x7A4, 3, 0) -#define _MX53_PAD_EIM_D18__I2C3_SDA IOMUX_PAD(0x468, 0x120, 5, 0x828, 0, 0) +#define _MX53_PAD_EIM_D18__I2C3_SDA IOMUX_PAD(0x468, 0x120, 5 | IOMUX_CONFIG_SION, 0x828, 0, 0) #define _MX53_PAD_EIM_D18__IPU_DI1_D0_CS IOMUX_PAD(0x468, 0x120, 6, 0x0, 0, 0) #define _MX53_PAD_EIM_D19__EMI_WEIM_D_19 IOMUX_PAD(0x46C, 0x124, 0, 0x0, 0, 0) #define _MX53_PAD_EIM_D19__GPIO3_19 IOMUX_PAD(0x46C, 0x124, 1, 0x0, 0, 0) @@ -485,7 +485,7 @@ #define _MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS IOMUX_PAD(0x46C, 0x124, 3, 0x0, 0, 0) #define _MX53_PAD_EIM_D19__ECSPI1_SS1 IOMUX_PAD(0x46C, 0x124, 4, 0x7AC, 2, 0) #define _MX53_PAD_EIM_D19__EPIT1_EPITO IOMUX_PAD(0x46C, 0x124, 5, 0x0, 0, 0) -#define _MX53_PAD_EIM_D19__UART1_CTS IOMUX_PAD(0x46C, 0x124, 6, 0x874, 0, 0) +#define _MX53_PAD_EIM_D19__UART1_CTS IOMUX_PAD(0x46C, 0x124, 6, 0x0, 0, 0) #define _MX53_PAD_EIM_D19__USBOH3_USBH2_OC IOMUX_PAD(0x46C, 0x124, 7, 0x8A4, 0, 0) #define _MX53_PAD_EIM_D20__EMI_WEIM_D_20 IOMUX_PAD(0x470, 0x128, 0, 0x0, 0, 0) #define _MX53_PAD_EIM_D20__GPIO3_20 IOMUX_PAD(0x470, 0x128, 1, 0x0, 0, 0) @@ -500,7 +500,7 @@ #define _MX53_PAD_EIM_D21__IPU_DI0_PIN17 IOMUX_PAD(0x474, 0x12C, 2, 0x0, 0, 0) #define _MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK IOMUX_PAD(0x474, 0x12C, 3, 0x0, 0, 0) #define _MX53_PAD_EIM_D21__CSPI_SCLK IOMUX_PAD(0x474, 0x12C, 4, 0x780, 1, 0) -#define _MX53_PAD_EIM_D21__I2C1_SCL IOMUX_PAD(0x474, 0x12C, 5, 0x814, 1, 0) +#define _MX53_PAD_EIM_D21__I2C1_SCL IOMUX_PAD(0x474, 0x12C, 5 | IOMUX_CONFIG_SION, 0x814, 1, 0) #define _MX53_PAD_EIM_D21__USBOH3_USBOTG_OC IOMUX_PAD(0x474, 0x12C, 6, 0x89C, 1, 0) #define _MX53_PAD_EIM_D22__EMI_WEIM_D_22 IOMUX_PAD(0x478, 0x130, 0, 0x0, 0, 0) #define _MX53_PAD_EIM_D22__GPIO3_22 IOMUX_PAD(0x478, 0x130, 1, 0x0, 0, 0) @@ -510,7 +510,7 @@ #define _MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR IOMUX_PAD(0x478, 0x130, 6, 0x0, 0, 0) #define _MX53_PAD_EIM_D23__EMI_WEIM_D_23 IOMUX_PAD(0x47C, 0x134, 0, 0x0, 0, 0) #define _MX53_PAD_EIM_D23__GPIO3_23 IOMUX_PAD(0x47C, 0x134, 1, 0x0, 0, 0) -#define _MX53_PAD_EIM_D23__UART3_CTS IOMUX_PAD(0x47C, 0x134, 2, 0x884, 0, 0) +#define _MX53_PAD_EIM_D23__UART3_CTS IOMUX_PAD(0x47C, 0x134, 2, 0x0, 0, 0) #define _MX53_PAD_EIM_D23__UART1_DCD IOMUX_PAD(0x47C, 0x134, 3, 0x0, 0, 0) #define _MX53_PAD_EIM_D23__IPU_DI0_D0_CS IOMUX_PAD(0x47C, 0x134, 4, 0x0, 0, 0) #define _MX53_PAD_EIM_D23__IPU_DI1_PIN2 IOMUX_PAD(0x47C, 0x134, 5, 0x0, 0, 0) @@ -525,7 +525,7 @@ #define _MX53_PAD_EIM_EB3__IPU_DI1_PIN16 IOMUX_PAD(0x480, 0x138, 7, 0x0, 0, 0) #define _MX53_PAD_EIM_D24__EMI_WEIM_D_24 IOMUX_PAD(0x484, 0x13C, 0, 0x0, 0, 0) #define _MX53_PAD_EIM_D24__GPIO3_24 IOMUX_PAD(0x484, 0x13C, 1, 0x0, 0, 0) -#define _MX53_PAD_EIM_D24__UART3_TXD_MUX IOMUX_PAD(0x484, 0x13C, 2, 0x888, 0, 0) +#define _MX53_PAD_EIM_D24__UART3_TXD_MUX IOMUX_PAD(0x484, 0x13C, 2, 0x0, 0, 0) #define _MX53_PAD_EIM_D24__ECSPI1_SS2 IOMUX_PAD(0x484, 0x13C, 3, 0x7B0, 1, 0) #define _MX53_PAD_EIM_D24__CSPI_SS2 IOMUX_PAD(0x484, 0x13C, 4, 0x794, 1, 0) #define _MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS IOMUX_PAD(0x484, 0x13C, 5, 0x754, 1, 0) @@ -541,7 +541,7 @@ #define _MX53_PAD_EIM_D25__UART1_DSR IOMUX_PAD(0x488, 0x140, 7, 0x0, 0, 0) #define _MX53_PAD_EIM_D26__EMI_WEIM_D_26 IOMUX_PAD(0x48C, 0x144, 0, 0x0, 0, 0) #define _MX53_PAD_EIM_D26__GPIO3_26 IOMUX_PAD(0x48C, 0x144, 1, 0x0, 0, 0) -#define _MX53_PAD_EIM_D26__UART2_TXD_MUX IOMUX_PAD(0x48C, 0x144, 2, 0x880, 0, 0) +#define _MX53_PAD_EIM_D26__UART2_TXD_MUX IOMUX_PAD(0x48C, 0x144, 2, 0x0, 0, 0) #define _MX53_PAD_EIM_D26__FIRI_RXD IOMUX_PAD(0x48C, 0x144, 3, 0x80C, 0, 0) #define _MX53_PAD_EIM_D26__IPU_CSI0_D_1 IOMUX_PAD(0x48C, 0x144, 4, 0x0, 0, 0) #define _MX53_PAD_EIM_D26__IPU_DI1_PIN11 IOMUX_PAD(0x48C, 0x144, 5, 0x0, 0, 0) @@ -557,10 +557,10 @@ #define _MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 IOMUX_PAD(0x490, 0x148, 7, 0x0, 0, 0) #define _MX53_PAD_EIM_D28__EMI_WEIM_D_28 IOMUX_PAD(0x494, 0x14C, 0, 0x0, 0, 0) #define _MX53_PAD_EIM_D28__GPIO3_28 IOMUX_PAD(0x494, 0x14C, 1, 0x0, 0, 0) -#define _MX53_PAD_EIM_D28__UART2_CTS IOMUX_PAD(0x494, 0x14C, 2, 0x87C, 0, 0) +#define _MX53_PAD_EIM_D28__UART2_CTS IOMUX_PAD(0x494, 0x14C, 2, 0x0, 0, 0) #define _MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO IOMUX_PAD(0x494, 0x14C, 3, 0x82C, 1, 0) #define _MX53_PAD_EIM_D28__CSPI_MOSI IOMUX_PAD(0x494, 0x14C, 4, 0x788, 1, 0) -#define _MX53_PAD_EIM_D28__I2C1_SDA IOMUX_PAD(0x494, 0x14C, 5, 0x818, 1, 0) +#define _MX53_PAD_EIM_D28__I2C1_SDA IOMUX_PAD(0x494, 0x14C, 5 | IOMUX_CONFIG_SION, 0x818, 1, 0) #define _MX53_PAD_EIM_D28__IPU_EXT_TRIG IOMUX_PAD(0x494, 0x14C, 6, 0x0, 0, 0) #define _MX53_PAD_EIM_D28__IPU_DI0_PIN13 IOMUX_PAD(0x494, 0x14C, 7, 0x0, 0, 0) #define _MX53_PAD_EIM_D29__EMI_WEIM_D_29 IOMUX_PAD(0x498, 0x150, 0, 0x0, 0, 0) @@ -573,7 +573,7 @@ #define _MX53_PAD_EIM_D29__IPU_DI0_PIN14 IOMUX_PAD(0x498, 0x150, 7, 0x0, 0, 0) #define _MX53_PAD_EIM_D30__EMI_WEIM_D_30 IOMUX_PAD(0x49C, 0x154, 0, 0x0, 0, 0) #define _MX53_PAD_EIM_D30__GPIO3_30 IOMUX_PAD(0x49C, 0x154, 1, 0x0, 0, 0) -#define _MX53_PAD_EIM_D30__UART3_CTS IOMUX_PAD(0x49C, 0x154, 2, 0x884, 2, 0) +#define _MX53_PAD_EIM_D30__UART3_CTS IOMUX_PAD(0x49C, 0x154, 2, 0x0, 0, 0) #define _MX53_PAD_EIM_D30__IPU_CSI0_D_3 IOMUX_PAD(0x49C, 0x154, 3, 0x0, 0, 0) #define _MX53_PAD_EIM_D30__IPU_DI0_PIN11 IOMUX_PAD(0x49C, 0x154, 4, 0x0, 0, 0) #define _MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 IOMUX_PAD(0x49C, 0x154, 5, 0x0, 0, 0) @@ -697,7 +697,7 @@ #define _MX53_PAD_EIM_DA5__GPIO3_5 IOMUX_PAD(0x500, 0x1B0, 1, 0x0, 0, 0) #define _MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 IOMUX_PAD(0x500, 0x1B0, 3, 0x0, 0, 0) #define _MX53_PAD_EIM_DA5__IPU_CSI1_D_4 IOMUX_PAD(0x500, 0x1B0, 4, 0x0, 0, 0) -#define _MX53_PAD_EIM_DA5__SRC_BT_CFG3_6 IOMUX_PAD(0x500, 0x1B0, 17, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA5__SRC_BT_CFG3_6 IOMUX_PAD(0x500, 0x1B0, 7 | IOMUX_CONFIG_SION, 0x0, 0, 0) #define _MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 IOMUX_PAD(0x504, 0x1B4, 0, 0x0, 0, 0) #define _MX53_PAD_EIM_DA6__GPIO3_6 IOMUX_PAD(0x504, 0x1B4, 1, 0x0, 0, 0) #define _MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 IOMUX_PAD(0x504, 0x1B4, 3, 0x0, 0, 0) @@ -859,7 +859,7 @@ #define _MX53_PAD_FEC_MDC__USBPHY2_DATAOUT_1 IOMUX_PAD(0x5E8, 0x26C, 7, 0x0, 0, 0) #define _MX53_PAD_PATA_DIOW__PATA_DIOW IOMUX_PAD(0x5F0, 0x270, 0, 0x0, 0, 0) #define _MX53_PAD_PATA_DIOW__GPIO6_17 IOMUX_PAD(0x5F0, 0x270, 1, 0x0, 0, 0) -#define _MX53_PAD_PATA_DIOW__UART1_TXD_MUX IOMUX_PAD(0x5F0, 0x270, 3, 0x878, 2, 0) +#define _MX53_PAD_PATA_DIOW__UART1_TXD_MUX IOMUX_PAD(0x5F0, 0x270, 3, 0x0, 0, 0) #define _MX53_PAD_PATA_DIOW__USBPHY2_DATAOUT_2 IOMUX_PAD(0x5F0, 0x270, 7, 0x0, 0, 0) #define _MX53_PAD_PATA_DMACK__PATA_DMACK IOMUX_PAD(0x5F4, 0x274, 0, 0x0, 0, 0) #define _MX53_PAD_PATA_DMACK__GPIO6_18 IOMUX_PAD(0x5F4, 0x274, 1, 0x0, 0, 0) @@ -867,7 +867,7 @@ #define _MX53_PAD_PATA_DMACK__USBPHY2_DATAOUT_3 IOMUX_PAD(0x5F4, 0x274, 7, 0x0, 0, 0) #define _MX53_PAD_PATA_DMARQ__PATA_DMARQ IOMUX_PAD(0x5F8, 0x278, 0, 0x0, 0, 0) #define _MX53_PAD_PATA_DMARQ__GPIO7_0 IOMUX_PAD(0x5F8, 0x278, 1, 0x0, 0, 0) -#define _MX53_PAD_PATA_DMARQ__UART2_TXD_MUX IOMUX_PAD(0x5F8, 0x278, 3, 0x880, 2, 0) +#define _MX53_PAD_PATA_DMARQ__UART2_TXD_MUX IOMUX_PAD(0x5F8, 0x278, 3, 0x0, 0, 0) #define _MX53_PAD_PATA_DMARQ__CCM_CCM_OUT_0 IOMUX_PAD(0x5F8, 0x278, 5, 0x0, 0, 0) #define _MX53_PAD_PATA_DMARQ__USBPHY2_DATAOUT_4 IOMUX_PAD(0x5F8, 0x278, 7, 0x0, 0, 0) #define _MX53_PAD_PATA_BUFFER_EN__PATA_BUFFER_EN IOMUX_PAD(0x5FC, 0x27C, 0, 0x0, 0, 0) @@ -877,7 +877,7 @@ #define _MX53_PAD_PATA_BUFFER_EN__USBPHY2_DATAOUT_5 IOMUX_PAD(0x5FC, 0x27C, 7, 0x0, 0, 0) #define _MX53_PAD_PATA_INTRQ__PATA_INTRQ IOMUX_PAD(0x600, 0x280, 0, 0x0, 0, 0) #define _MX53_PAD_PATA_INTRQ__GPIO7_2 IOMUX_PAD(0x600, 0x280, 1, 0x0, 0, 0) -#define _MX53_PAD_PATA_INTRQ__UART2_CTS IOMUX_PAD(0x600, 0x280, 3, 0x87C, 2, 0) +#define _MX53_PAD_PATA_INTRQ__UART2_CTS IOMUX_PAD(0x600, 0x280, 3, 0x0, 0, 0) #define _MX53_PAD_PATA_INTRQ__CAN1_TXCAN IOMUX_PAD(0x600, 0x280, 4, 0x0, 0, 0) #define _MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2 IOMUX_PAD(0x600, 0x280, 5, 0x0, 0, 0) #define _MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6 IOMUX_PAD(0x600, 0x280, 7, 0x0, 0, 0) @@ -889,7 +889,7 @@ #define _MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B IOMUX_PAD(0x608, 0x288, 0, 0x0, 0, 0) #define _MX53_PAD_PATA_RESET_B__GPIO7_4 IOMUX_PAD(0x608, 0x288, 1, 0x0, 0, 0) #define _MX53_PAD_PATA_RESET_B__ESDHC3_CMD IOMUX_PAD(0x608, 0x288, 2, 0x0, 0, 0) -#define _MX53_PAD_PATA_RESET_B__UART1_CTS IOMUX_PAD(0x608, 0x288, 3, 0x874, 2, 0) +#define _MX53_PAD_PATA_RESET_B__UART1_CTS IOMUX_PAD(0x608, 0x288, 3, 0x0, 0, 0) #define _MX53_PAD_PATA_RESET_B__CAN2_TXCAN IOMUX_PAD(0x608, 0x288, 4, 0x0, 0, 0) #define _MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0 IOMUX_PAD(0x608, 0x288, 7, 0x0, 0, 0) #define _MX53_PAD_PATA_IORDY__PATA_IORDY IOMUX_PAD(0x60C, 0x28C, 0, 0x0, 0, 0) @@ -906,7 +906,7 @@ #define _MX53_PAD_PATA_DA_1__PATA_DA_1 IOMUX_PAD(0x614, 0x294, 0, 0x0, 0, 0) #define _MX53_PAD_PATA_DA_1__GPIO7_7 IOMUX_PAD(0x614, 0x294, 1, 0x0, 0, 0) #define _MX53_PAD_PATA_DA_1__ESDHC4_CMD IOMUX_PAD(0x614, 0x294, 2, 0x0, 0, 0) -#define _MX53_PAD_PATA_DA_1__UART3_CTS IOMUX_PAD(0x614, 0x294, 4, 0x884, 4, 0) +#define _MX53_PAD_PATA_DA_1__UART3_CTS IOMUX_PAD(0x614, 0x294, 4, 0x0, 0, 0) #define _MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3 IOMUX_PAD(0x614, 0x294, 7, 0x0, 0, 0) #define _MX53_PAD_PATA_DA_2__PATA_DA_2 IOMUX_PAD(0x618, 0x298, 0, 0x0, 0, 0) #define _MX53_PAD_PATA_DA_2__GPIO7_8 IOMUX_PAD(0x618, 0x298, 1, 0x0, 0, 0) @@ -915,7 +915,7 @@ #define _MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4 IOMUX_PAD(0x618, 0x298, 7, 0x0, 0, 0) #define _MX53_PAD_PATA_CS_0__PATA_CS_0 IOMUX_PAD(0x61C, 0x29C, 0, 0x0, 0, 0) #define _MX53_PAD_PATA_CS_0__GPIO7_9 IOMUX_PAD(0x61C, 0x29C, 1, 0x0, 0, 0) -#define _MX53_PAD_PATA_CS_0__UART3_TXD_MUX IOMUX_PAD(0x61C, 0x29C, 4, 0x888, 2, 0) +#define _MX53_PAD_PATA_CS_0__UART3_TXD_MUX IOMUX_PAD(0x61C, 0x29C, 4, 0x0, 0, 0) #define _MX53_PAD_PATA_CS_0__USBPHY1_DATAOUT_5 IOMUX_PAD(0x61C, 0x29C, 7, 0x0, 0, 0) #define _MX53_PAD_PATA_CS_1__PATA_CS_1 IOMUX_PAD(0x620, 0x2A0, 0, 0x0, 0, 0) #define _MX53_PAD_PATA_CS_1__GPIO7_10 IOMUX_PAD(0x620, 0x2A0, 1, 0x0, 0, 0) @@ -958,12 +958,12 @@ #define _MX53_PAD_PATA_DATA5__ESDHC4_DAT5 IOMUX_PAD(0x63C, 0x2B8, 4, 0x0, 0, 0) #define _MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5 IOMUX_PAD(0x63C, 0x2B8, 5, 0x0, 0, 0) #define _MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5 IOMUX_PAD(0x63C, 0x2B8, 6, 0x0, 0, 0) -#define _MX53_PAD_PATA_DATA6__PATA_DATA_6 IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA6__PATA_DATA_6 IOMUX_PAD(0x640, 0x2BC, 0, 0x0, 0, 0) #define _MX53_PAD_PATA_DATA6__GPIO2_6 IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0) -#define _MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0) -#define _MX53_PAD_PATA_DATA6__ESDHC4_DAT6 IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0) -#define _MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6 IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0) -#define _MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6 IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 IOMUX_PAD(0x640, 0x2BC, 3, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA6__ESDHC4_DAT6 IOMUX_PAD(0x640, 0x2BC, 4, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6 IOMUX_PAD(0x640, 0x2BC, 5, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6 IOMUX_PAD(0x640, 0x2BC, 6, 0x0, 0, 0) #define _MX53_PAD_PATA_DATA7__PATA_DATA_7 IOMUX_PAD(0x644, 0x2C0, 0, 0x0, 0, 0) #define _MX53_PAD_PATA_DATA7__GPIO2_7 IOMUX_PAD(0x644, 0x2C0, 1, 0x0, 0, 0) #define _MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 IOMUX_PAD(0x644, 0x2C0, 3, 0x0, 0, 0) @@ -1161,13 +1161,13 @@ #define _MX53_PAD_GPIO_5__CCM_CLKO IOMUX_PAD(0x6C0, 0x330, 3, 0x0, 0, 0) #define _MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 IOMUX_PAD(0x6C0, 0x330, 4, 0x0, 0, 0) #define _MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 IOMUX_PAD(0x6C0, 0x330, 5, 0x0, 0, 0) -#define _MX53_PAD_GPIO_5__I2C3_SCL IOMUX_PAD(0x6C0, 0x330, 6, 0x824, 2, 0) +#define _MX53_PAD_GPIO_5__I2C3_SCL IOMUX_PAD(0x6C0, 0x330, 6 | IOMUX_CONFIG_SION, 0x824, 2, 0) #define _MX53_PAD_GPIO_5__CCM_PLL1_BYP IOMUX_PAD(0x6C0, 0x330, 7, 0x770, 1, 0) #define _MX53_PAD_GPIO_7__ESAI1_TX4_RX1 IOMUX_PAD(0x6C4, 0x334, 0, 0x7F4, 1, 0) #define _MX53_PAD_GPIO_7__GPIO1_7 IOMUX_PAD(0x6C4, 0x334, 1, 0x0, 0, 0) #define _MX53_PAD_GPIO_7__EPIT1_EPITO IOMUX_PAD(0x6C4, 0x334, 2, 0x0, 0, 0) #define _MX53_PAD_GPIO_7__CAN1_TXCAN IOMUX_PAD(0x6C4, 0x334, 3, 0x0, 0, 0) -#define _MX53_PAD_GPIO_7__UART2_TXD_MUX IOMUX_PAD(0x6C4, 0x334, 4, 0x880, 4, 0) +#define _MX53_PAD_GPIO_7__UART2_TXD_MUX IOMUX_PAD(0x6C4, 0x334, 4, 0x0, 0, 0) #define _MX53_PAD_GPIO_7__FIRI_RXD IOMUX_PAD(0x6C4, 0x334, 5, 0x80C, 1, 0) #define _MX53_PAD_GPIO_7__SPDIF_PLOCK IOMUX_PAD(0x6C4, 0x334, 6, 0x0, 0, 0) #define _MX53_PAD_GPIO_7__CCM_PLL2_BYP IOMUX_PAD(0x6C4, 0x334, 7, 0x774, 1, 0) @@ -1214,27 +1214,27 @@ #define MX53_PAD_KEY_COL0__KPP_COL_0 (_MX53_PAD_KEY_COL0__KPP_COL_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_COL0__GPIO4_6 (_MX53_PAD_KEY_COL0__GPIO4_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC (_MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_KEY_COL0__UART4_TXD_MUX (_MX53_PAD_KEY_COL0__UART4_TXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL0__UART4_TXD_MUX (_MX53_PAD_KEY_COL0__UART4_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_KEY_COL0__ECSPI1_SCLK (_MX53_PAD_KEY_COL0__ECSPI1_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_COL0__FEC_RDATA_3 (_MX53_PAD_KEY_COL0__FEC_RDATA_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_COL0__SRC_ANY_PU_RST (_MX53_PAD_KEY_COL0__SRC_ANY_PU_RST | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW0__KPP_ROW_0 (_MX53_PAD_KEY_ROW0__KPP_ROW_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW0__GPIO4_7 (_MX53_PAD_KEY_ROW0__GPIO4_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD (_MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_KEY_ROW0__UART4_RXD_MUX (_MX53_PAD_KEY_ROW0__UART4_RXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW0__UART4_RXD_MUX (_MX53_PAD_KEY_ROW0__UART4_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_KEY_ROW0__ECSPI1_MOSI (_MX53_PAD_KEY_ROW0__ECSPI1_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW0__FEC_TX_ER (_MX53_PAD_KEY_ROW0__FEC_TX_ER | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_COL1__KPP_COL_1 (_MX53_PAD_KEY_COL1__KPP_COL_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_COL1__GPIO4_8 (_MX53_PAD_KEY_COL1__GPIO4_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS (_MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_KEY_COL1__UART5_TXD_MUX (_MX53_PAD_KEY_COL1__UART5_TXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL1__UART5_TXD_MUX (_MX53_PAD_KEY_COL1__UART5_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_KEY_COL1__ECSPI1_MISO (_MX53_PAD_KEY_COL1__ECSPI1_MISO | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_COL1__FEC_RX_CLK (_MX53_PAD_KEY_COL1__FEC_RX_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_COL1__USBPHY1_TXREADY (_MX53_PAD_KEY_COL1__USBPHY1_TXREADY | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW1__KPP_ROW_1 (_MX53_PAD_KEY_ROW1__KPP_ROW_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW1__GPIO4_9 (_MX53_PAD_KEY_ROW1__GPIO4_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD (_MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_KEY_ROW1__UART5_RXD_MUX (_MX53_PAD_KEY_ROW1__UART5_RXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW1__UART5_RXD_MUX (_MX53_PAD_KEY_ROW1__UART5_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_KEY_ROW1__ECSPI1_SS0 (_MX53_PAD_KEY_ROW1__ECSPI1_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW1__FEC_COL (_MX53_PAD_KEY_ROW1__FEC_COL | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW1__USBPHY1_RXVALID (_MX53_PAD_KEY_ROW1__USBPHY1_RXVALID | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1272,14 +1272,14 @@ #define MX53_PAD_KEY_COL4__GPIO4_14 (_MX53_PAD_KEY_COL4__GPIO4_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_COL4__CAN2_TXCAN (_MX53_PAD_KEY_COL4__CAN2_TXCAN | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_COL4__IPU_SISG_4 (_MX53_PAD_KEY_COL4__IPU_SISG_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_KEY_COL4__UART5_RTS (_MX53_PAD_KEY_COL4__UART5_RTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL4__UART5_RTS (_MX53_PAD_KEY_COL4__UART5_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC (_MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1 (_MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW4__KPP_ROW_4 (_MX53_PAD_KEY_ROW4__KPP_ROW_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW4__GPIO4_15 (_MX53_PAD_KEY_ROW4__GPIO4_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW4__CAN2_RXCAN (_MX53_PAD_KEY_ROW4__CAN2_RXCAN | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW4__IPU_SISG_5 (_MX53_PAD_KEY_ROW4__IPU_SISG_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_KEY_ROW4__UART5_CTS (_MX53_PAD_KEY_ROW4__UART5_CTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW4__UART5_CTS (_MX53_PAD_KEY_ROW4__UART5_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR (_MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID (_MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK (_MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1565,56 +1565,56 @@ #define MX53_PAD_CSI0_DAT11__TPIU_TRACE_8 (_MX53_PAD_CSI0_DAT11__TPIU_TRACE_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 (_MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT12__GPIO5_30 (_MX53_PAD_CSI0_DAT12__GPIO5_30 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_CSI0_DAT12__UART4_TXD_MUX (_MX53_PAD_CSI0_DAT12__UART4_TXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT12__UART4_TXD_MUX (_MX53_PAD_CSI0_DAT12__UART4_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 (_MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6 (_MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41 (_MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT12__TPIU_TRACE_9 (_MX53_PAD_CSI0_DAT12__TPIU_TRACE_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 (_MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT13__GPIO5_31 (_MX53_PAD_CSI0_DAT13__GPIO5_31 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_CSI0_DAT13__UART4_RXD_MUX (_MX53_PAD_CSI0_DAT13__UART4_RXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT13__UART4_RXD_MUX (_MX53_PAD_CSI0_DAT13__UART4_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 (_MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7 (_MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42 (_MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT13__TPIU_TRACE_10 (_MX53_PAD_CSI0_DAT13__TPIU_TRACE_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 (_MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT14__GPIO6_0 (_MX53_PAD_CSI0_DAT14__GPIO6_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_CSI0_DAT14__UART5_TXD_MUX (_MX53_PAD_CSI0_DAT14__UART5_TXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT14__UART5_TXD_MUX (_MX53_PAD_CSI0_DAT14__UART5_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 (_MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8 (_MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43 (_MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT14__TPIU_TRACE_11 (_MX53_PAD_CSI0_DAT14__TPIU_TRACE_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 (_MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT15__GPIO6_1 (_MX53_PAD_CSI0_DAT15__GPIO6_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_CSI0_DAT15__UART5_RXD_MUX (_MX53_PAD_CSI0_DAT15__UART5_RXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT15__UART5_RXD_MUX (_MX53_PAD_CSI0_DAT15__UART5_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 (_MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9 (_MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44 (_MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT15__TPIU_TRACE_12 (_MX53_PAD_CSI0_DAT15__TPIU_TRACE_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 (_MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT16__GPIO6_2 (_MX53_PAD_CSI0_DAT16__GPIO6_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_CSI0_DAT16__UART4_RTS (_MX53_PAD_CSI0_DAT16__UART4_RTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT16__UART4_RTS (_MX53_PAD_CSI0_DAT16__UART4_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 (_MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10 (_MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45 (_MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT16__TPIU_TRACE_13 (_MX53_PAD_CSI0_DAT16__TPIU_TRACE_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 (_MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT17__GPIO6_3 (_MX53_PAD_CSI0_DAT17__GPIO6_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_CSI0_DAT17__UART4_CTS (_MX53_PAD_CSI0_DAT17__UART4_CTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT17__UART4_CTS (_MX53_PAD_CSI0_DAT17__UART4_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 (_MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11 (_MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46 (_MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT17__TPIU_TRACE_14 (_MX53_PAD_CSI0_DAT17__TPIU_TRACE_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 (_MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT18__GPIO6_4 (_MX53_PAD_CSI0_DAT18__GPIO6_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_CSI0_DAT18__UART5_RTS (_MX53_PAD_CSI0_DAT18__UART5_RTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT18__UART5_RTS (_MX53_PAD_CSI0_DAT18__UART5_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 (_MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12 (_MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47 (_MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT18__TPIU_TRACE_15 (_MX53_PAD_CSI0_DAT18__TPIU_TRACE_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 (_MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT19__GPIO6_5 (_MX53_PAD_CSI0_DAT19__GPIO6_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_CSI0_DAT19__UART5_CTS (_MX53_PAD_CSI0_DAT19__UART5_CTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT19__UART5_CTS (_MX53_PAD_CSI0_DAT19__UART5_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 (_MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13 (_MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48 (_MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1657,7 +1657,7 @@ #define MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS (_MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D19__ECSPI1_SS1 (_MX53_PAD_EIM_D19__ECSPI1_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D19__EPIT1_EPITO (_MX53_PAD_EIM_D19__EPIT1_EPITO | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D19__UART1_CTS (_MX53_PAD_EIM_D19__UART1_CTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D19__UART1_CTS (_MX53_PAD_EIM_D19__UART1_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_EIM_D19__USBOH3_USBH2_OC (_MX53_PAD_EIM_D19__USBOH3_USBH2_OC | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D20__EMI_WEIM_D_20 (_MX53_PAD_EIM_D20__EMI_WEIM_D_20 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D20__GPIO3_20 (_MX53_PAD_EIM_D20__GPIO3_20 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1665,7 +1665,7 @@ #define MX53_PAD_EIM_D20__IPU_SER_DISP0_CS (_MX53_PAD_EIM_D20__IPU_SER_DISP0_CS | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D20__CSPI_SS0 (_MX53_PAD_EIM_D20__CSPI_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D20__EPIT2_EPITO (_MX53_PAD_EIM_D20__EPIT2_EPITO | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D20__UART1_RTS (_MX53_PAD_EIM_D20__UART1_RTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D20__UART1_RTS (_MX53_PAD_EIM_D20__UART1_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_EIM_D20__USBOH3_USBH2_PWR (_MX53_PAD_EIM_D20__USBOH3_USBH2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D21__EMI_WEIM_D_21 (_MX53_PAD_EIM_D21__EMI_WEIM_D_21 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D21__GPIO3_21 (_MX53_PAD_EIM_D21__GPIO3_21 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1682,7 +1682,7 @@ #define MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR (_MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D23__EMI_WEIM_D_23 (_MX53_PAD_EIM_D23__EMI_WEIM_D_23 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D23__GPIO3_23 (_MX53_PAD_EIM_D23__GPIO3_23 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D23__UART3_CTS (_MX53_PAD_EIM_D23__UART3_CTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D23__UART3_CTS (_MX53_PAD_EIM_D23__UART3_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_EIM_D23__UART1_DCD (_MX53_PAD_EIM_D23__UART1_DCD | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D23__IPU_DI0_D0_CS (_MX53_PAD_EIM_D23__IPU_DI0_D0_CS | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D23__IPU_DI1_PIN2 (_MX53_PAD_EIM_D23__IPU_DI1_PIN2 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1690,14 +1690,14 @@ #define MX53_PAD_EIM_D23__IPU_DI1_PIN14 (_MX53_PAD_EIM_D23__IPU_DI1_PIN14 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_EB3__EMI_WEIM_EB_3 (_MX53_PAD_EIM_EB3__EMI_WEIM_EB_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_EB3__GPIO2_31 (_MX53_PAD_EIM_EB3__GPIO2_31 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_EB3__UART3_RTS (_MX53_PAD_EIM_EB3__UART3_RTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB3__UART3_RTS (_MX53_PAD_EIM_EB3__UART3_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_EIM_EB3__UART1_RI (_MX53_PAD_EIM_EB3__UART1_RI | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_EB3__IPU_DI1_PIN3 (_MX53_PAD_EIM_EB3__IPU_DI1_PIN3 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC (_MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_EB3__IPU_DI1_PIN16 (_MX53_PAD_EIM_EB3__IPU_DI1_PIN16 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D24__EMI_WEIM_D_24 (_MX53_PAD_EIM_D24__EMI_WEIM_D_24 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D24__GPIO3_24 (_MX53_PAD_EIM_D24__GPIO3_24 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D24__UART3_TXD_MUX (_MX53_PAD_EIM_D24__UART3_TXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D24__UART3_TXD_MUX (_MX53_PAD_EIM_D24__UART3_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_EIM_D24__ECSPI1_SS2 (_MX53_PAD_EIM_D24__ECSPI1_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D24__CSPI_SS2 (_MX53_PAD_EIM_D24__CSPI_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS (_MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1705,7 +1705,7 @@ #define MX53_PAD_EIM_D24__UART1_DTR (_MX53_PAD_EIM_D24__UART1_DTR | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D25__EMI_WEIM_D_25 (_MX53_PAD_EIM_D25__EMI_WEIM_D_25 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D25__GPIO3_25 (_MX53_PAD_EIM_D25__GPIO3_25 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D25__UART3_RXD_MUX (_MX53_PAD_EIM_D25__UART3_RXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D25__UART3_RXD_MUX (_MX53_PAD_EIM_D25__UART3_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_EIM_D25__ECSPI1_SS3 (_MX53_PAD_EIM_D25__ECSPI1_SS3 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D25__CSPI_SS3 (_MX53_PAD_EIM_D25__CSPI_SS3 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC (_MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1713,7 +1713,7 @@ #define MX53_PAD_EIM_D25__UART1_DSR (_MX53_PAD_EIM_D25__UART1_DSR | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D26__EMI_WEIM_D_26 (_MX53_PAD_EIM_D26__EMI_WEIM_D_26 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D26__GPIO3_26 (_MX53_PAD_EIM_D26__GPIO3_26 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D26__UART2_TXD_MUX (_MX53_PAD_EIM_D26__UART2_TXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D26__UART2_TXD_MUX (_MX53_PAD_EIM_D26__UART2_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_EIM_D26__FIRI_RXD (_MX53_PAD_EIM_D26__FIRI_RXD | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D26__IPU_CSI0_D_1 (_MX53_PAD_EIM_D26__IPU_CSI0_D_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D26__IPU_DI1_PIN11 (_MX53_PAD_EIM_D26__IPU_DI1_PIN11 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1721,7 +1721,7 @@ #define MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 (_MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D27__EMI_WEIM_D_27 (_MX53_PAD_EIM_D27__EMI_WEIM_D_27 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D27__GPIO3_27 (_MX53_PAD_EIM_D27__GPIO3_27 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D27__UART2_RXD_MUX (_MX53_PAD_EIM_D27__UART2_RXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D27__UART2_RXD_MUX (_MX53_PAD_EIM_D27__UART2_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_EIM_D27__FIRI_TXD (_MX53_PAD_EIM_D27__FIRI_TXD | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D27__IPU_CSI0_D_0 (_MX53_PAD_EIM_D27__IPU_CSI0_D_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D27__IPU_DI1_PIN13 (_MX53_PAD_EIM_D27__IPU_DI1_PIN13 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1729,7 +1729,7 @@ #define MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 (_MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D28__EMI_WEIM_D_28 (_MX53_PAD_EIM_D28__EMI_WEIM_D_28 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D28__GPIO3_28 (_MX53_PAD_EIM_D28__GPIO3_28 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D28__UART2_CTS (_MX53_PAD_EIM_D28__UART2_CTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D28__UART2_CTS (_MX53_PAD_EIM_D28__UART2_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO (_MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D28__CSPI_MOSI (_MX53_PAD_EIM_D28__CSPI_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D28__I2C1_SDA (_MX53_PAD_EIM_D28__I2C1_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1737,7 +1737,7 @@ #define MX53_PAD_EIM_D28__IPU_DI0_PIN13 (_MX53_PAD_EIM_D28__IPU_DI0_PIN13 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D29__EMI_WEIM_D_29 (_MX53_PAD_EIM_D29__EMI_WEIM_D_29 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D29__GPIO3_29 (_MX53_PAD_EIM_D29__GPIO3_29 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D29__UART2_RTS (_MX53_PAD_EIM_D29__UART2_RTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D29__UART2_RTS (_MX53_PAD_EIM_D29__UART2_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS (_MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D29__CSPI_SS0 (_MX53_PAD_EIM_D29__CSPI_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D29__IPU_DI1_PIN15 (_MX53_PAD_EIM_D29__IPU_DI1_PIN15 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1745,7 +1745,7 @@ #define MX53_PAD_EIM_D29__IPU_DI0_PIN14 (_MX53_PAD_EIM_D29__IPU_DI0_PIN14 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D30__EMI_WEIM_D_30 (_MX53_PAD_EIM_D30__EMI_WEIM_D_30 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D30__GPIO3_30 (_MX53_PAD_EIM_D30__GPIO3_30 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D30__UART3_CTS (_MX53_PAD_EIM_D30__UART3_CTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D30__UART3_CTS (_MX53_PAD_EIM_D30__UART3_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_EIM_D30__IPU_CSI0_D_3 (_MX53_PAD_EIM_D30__IPU_CSI0_D_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D30__IPU_DI0_PIN11 (_MX53_PAD_EIM_D30__IPU_DI0_PIN11 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 (_MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1753,7 +1753,7 @@ #define MX53_PAD_EIM_D30__USBOH3_USBH2_OC (_MX53_PAD_EIM_D30__USBOH3_USBH2_OC | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D31__EMI_WEIM_D_31 (_MX53_PAD_EIM_D31__EMI_WEIM_D_31 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D31__GPIO3_31 (_MX53_PAD_EIM_D31__GPIO3_31 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D31__UART3_RTS (_MX53_PAD_EIM_D31__UART3_RTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D31__UART3_RTS (_MX53_PAD_EIM_D31__UART3_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_EIM_D31__IPU_CSI0_D_2 (_MX53_PAD_EIM_D31__IPU_CSI0_D_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D31__IPU_DI0_PIN12 (_MX53_PAD_EIM_D31__IPU_DI0_PIN12 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 (_MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -2061,13 +2061,13 @@ #define MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B (_MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_RESET_B__GPIO7_4 (_MX53_PAD_PATA_RESET_B__GPIO7_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_RESET_B__ESDHC3_CMD (_MX53_PAD_PATA_RESET_B__ESDHC3_CMD | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) -#define MX53_PAD_PATA_RESET_B__UART1_CTS (_MX53_PAD_PATA_RESET_B__UART1_CTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_RESET_B__UART1_CTS (_MX53_PAD_PATA_RESET_B__UART1_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_PATA_RESET_B__CAN2_TXCAN (_MX53_PAD_PATA_RESET_B__CAN2_TXCAN | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0 (_MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_IORDY__PATA_IORDY (_MX53_PAD_PATA_IORDY__PATA_IORDY | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_IORDY__GPIO7_5 (_MX53_PAD_PATA_IORDY__GPIO7_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_IORDY__ESDHC3_CLK (_MX53_PAD_PATA_IORDY__ESDHC3_CLK | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) -#define MX53_PAD_PATA_IORDY__UART1_RTS (_MX53_PAD_PATA_IORDY__UART1_RTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_IORDY__UART1_RTS (_MX53_PAD_PATA_IORDY__UART1_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_PATA_IORDY__CAN2_RXCAN (_MX53_PAD_PATA_IORDY__CAN2_RXCAN | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1 (_MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DA_0__PATA_DA_0 (_MX53_PAD_PATA_DA_0__PATA_DA_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -2339,7 +2339,7 @@ #define MX53_PAD_GPIO_7__GPIO1_7 (_MX53_PAD_GPIO_7__GPIO1_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_7__EPIT1_EPITO (_MX53_PAD_GPIO_7__EPIT1_EPITO | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_7__CAN1_TXCAN (_MX53_PAD_GPIO_7__CAN1_TXCAN | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_GPIO_7__UART2_TXD_MUX (_MX53_PAD_GPIO_7__UART2_TXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_7__UART2_TXD_MUX (_MX53_PAD_GPIO_7__UART2_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_GPIO_7__FIRI_RXD (_MX53_PAD_GPIO_7__FIRI_RXD | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_7__SPDIF_PLOCK (_MX53_PAD_GPIO_7__SPDIF_PLOCK | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_7__CCM_PLL2_BYP (_MX53_PAD_GPIO_7__CCM_PLL2_BYP | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -2347,7 +2347,7 @@ #define MX53_PAD_GPIO_8__GPIO1_8 (_MX53_PAD_GPIO_8__GPIO1_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_8__EPIT2_EPITO (_MX53_PAD_GPIO_8__EPIT2_EPITO | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_8__CAN1_RXCAN (_MX53_PAD_GPIO_8__CAN1_RXCAN | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_GPIO_8__UART2_RXD_MUX (_MX53_PAD_GPIO_8__UART2_RXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_8__UART2_RXD_MUX (_MX53_PAD_GPIO_8__UART2_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_GPIO_8__FIRI_TXD (_MX53_PAD_GPIO_8__FIRI_TXD | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_8__SPDIF_SRCLK (_MX53_PAD_GPIO_8__SPDIF_SRCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_8__CCM_PLL3_BYP (_MX53_PAD_GPIO_8__CCM_PLL3_BYP | MUX_PAD_CTRL(NO_PAD_CTRL)) diff --git a/arch/arm/plat-mxc/include/mach/iomux-v1.h b/arch/arm/plat-mxc/include/mach/iomux-v1.h index c07d30210c57..6fa8a707b9a0 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-v1.h +++ b/arch/arm/plat-mxc/include/mach/iomux-v1.h @@ -85,9 +85,6 @@ #define GPIO_BOUT_0 (2 << GPIO_BOUT_SHIFT) #define GPIO_BOUT_1 (3 << GPIO_BOUT_SHIFT) -/* decode irq number to use with IMR(x), ISR(x) and friends */ -#define IRQ_TO_REG(irq) ((irq - MXC_INTERNAL_IRQS) >> 5) - #define IRQ_GPIOA(x) (MXC_GPIO_IRQ_START + x) #define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x) #define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x) @@ -98,7 +95,6 @@ extern int mxc_gpio_mode(int gpio_mode); extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count, const char *label); -extern void mxc_gpio_release_multiple_pins(const int *pin_list, int count); extern int __init imx_iomuxv1_init(void __iomem *base, int numports); diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h index 82620af1922f..ebbce33097a7 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-v3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h @@ -66,7 +66,6 @@ typedef u64 iomux_v3_cfg_t; #define MUX_MODE_MASK ((iomux_v3_cfg_t)0x1f << MUX_MODE_SHIFT) #define MUX_PAD_CTRL_SHIFT 41 #define MUX_PAD_CTRL_MASK ((iomux_v3_cfg_t)0x1ffff << MUX_PAD_CTRL_SHIFT) -#define NO_PAD_CTRL ((iomux_v3_cfg_t)1 << (MUX_PAD_CTRL_SHIFT + 16)) #define MUX_SEL_INPUT_SHIFT 58 #define MUX_SEL_INPUT_MASK ((iomux_v3_cfg_t)0xf << MUX_SEL_INPUT_SHIFT) @@ -85,6 +84,7 @@ typedef u64 iomux_v3_cfg_t; * Use to set PAD control */ +#define NO_PAD_CTRL (1 << 16) #define PAD_CTL_DVS (1 << 13) #define PAD_CTL_HYS (1 << 8) diff --git a/arch/arm/plat-mxc/include/mach/iomux.h b/arch/arm/plat-mxc/include/mach/iomux.h deleted file mode 100644 index 3d226d7e7be2..000000000000 --- a/arch/arm/plat-mxc/include/mach/iomux.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright (C) 2010 Uwe Kleine-Koenig, Pengutronix - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __MACH_IOMUX_H__ -#define __MACH_IOMUX_H__ - -/* This file will go away, please include mach/iomux-mx... directly */ - -#ifdef CONFIG_ARCH_MX1 -#include <mach/iomux-mx1.h> -#endif -#ifdef CONFIG_ARCH_MX2 -#include <mach/iomux-mx2x.h> -#ifdef CONFIG_MACH_MX21 -#include <mach/iomux-mx21.h> -#endif -#ifdef CONFIG_MACH_MX27 -#include <mach/iomux-mx27.h> -#endif -#endif - -#endif /* __MACH_IOMUX_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h index 35c89bcdf758..00e812bbd81d 100644 --- a/arch/arm/plat-mxc/include/mach/irqs.h +++ b/arch/arm/plat-mxc/include/mach/irqs.h @@ -11,6 +11,8 @@ #ifndef __ASM_ARCH_MXC_IRQS_H__ #define __ASM_ARCH_MXC_IRQS_H__ +#include <asm-generic/gpio.h> + /* * SoCs with TZIC interrupt controller have 128 IRQs, those with AVIC have 64 */ @@ -22,30 +24,13 @@ #define MXC_GPIO_IRQ_START MXC_INTERNAL_IRQS -/* these are ordered by size to support multi-SoC kernels */ -#if defined CONFIG_SOC_IMX53 -#define MXC_GPIO_IRQS (32 * 7) -#elif defined CONFIG_ARCH_MX2 -#define MXC_GPIO_IRQS (32 * 6) -#elif defined CONFIG_SOC_IMX50 -#define MXC_GPIO_IRQS (32 * 6) -#elif defined CONFIG_ARCH_MX1 -#define MXC_GPIO_IRQS (32 * 4) -#elif defined CONFIG_ARCH_MX25 -#define MXC_GPIO_IRQS (32 * 4) -#elif defined CONFIG_SOC_IMX51 -#define MXC_GPIO_IRQS (32 * 4) -#elif defined CONFIG_ARCH_MX3 -#define MXC_GPIO_IRQS (32 * 3) -#endif - /* * The next 16 interrupts are for board specific purposes. Since * the kernel can only run on one machine at a time, we can re-use * these. If you need more, increase MXC_BOARD_IRQS, but keep it * within sensible limits. */ -#define MXC_BOARD_IRQ_START (MXC_INTERNAL_IRQS + MXC_GPIO_IRQS) +#define MXC_BOARD_IRQ_START (MXC_INTERNAL_IRQS + ARCH_NR_GPIOS) #ifdef CONFIG_MACH_MX31ADS_WM1133_EV1 #define MXC_BOARD_IRQS 80 diff --git a/arch/arm/plat-mxc/include/mach/mx53.h b/arch/arm/plat-mxc/include/mach/mx53.h index 9d2a1ef84de2..74cd093203e0 100644 --- a/arch/arm/plat-mxc/include/mach/mx53.h +++ b/arch/arm/plat-mxc/include/mach/mx53.h @@ -145,14 +145,14 @@ /* * Memory regions and CS */ -#define MX53_CSD0_BASE_ADDR 0x90000000 -#define MX53_CSD1_BASE_ADDR 0xA0000000 -#define MX53_CS0_BASE_ADDR 0xB0000000 -#define MX53_CS1_BASE_ADDR 0xB8000000 -#define MX53_CS2_BASE_ADDR 0xC0000000 -#define MX53_CS3_BASE_ADDR 0xC8000000 -#define MX53_CS4_BASE_ADDR 0xCC000000 -#define MX53_CS5_BASE_ADDR 0xCE000000 +#define MX53_CSD0_BASE_ADDR 0x70000000 +#define MX53_CSD1_BASE_ADDR 0xB0000000 +#define MX53_CS0_BASE_ADDR 0xF0000000 +#define MX53_CS1_32MB_BASE_ADDR 0xF2000000 +#define MX53_CS1_64MB_BASE_ADDR 0xF4000000 +#define MX53_CS2_64MB_BASE_ADDR 0xF4000000 +#define MX53_CS2_96MB_BASE_ADDR 0xF6000000 +#define MX53_CS3_BASE_ADDR 0xF6000000 #define MX53_IO_P2V(x) IMX_IO_P2V(x) #define MX53_IO_ADDRESS(x) IOMEM(MX53_IO_P2V(x)) @@ -233,7 +233,7 @@ #define MX53_INT_ESDHC2 2 #define MX53_INT_ESDHC3 3 #define MX53_INT_ESDHC4 4 -#define MX53_INT_RESV5 5 +#define MX53_INT_DAP 5 #define MX53_INT_SDMA 6 #define MX53_INT_IOMUX 7 #define MX53_INT_NFC 8 @@ -262,8 +262,8 @@ #define MX53_INT_UART1 31 #define MX53_INT_UART2 32 #define MX53_INT_UART3 33 -#define MX53_INT_RESV34 34 -#define MX53_INT_RESV35 35 +#define MX53_INT_RTC 34 +#define MX53_INT_PTP 35 #define MX53_INT_ECSPI1 36 #define MX53_INT_ECSPI2 37 #define MX53_INT_CSPI 38 @@ -293,8 +293,8 @@ #define MX53_INT_I2C1 62 #define MX53_INT_I2C2 63 #define MX53_INT_I2C3 64 -#define MX53_INT_RESV65 65 -#define MX53_INT_RESV66 66 +#define MX53_INT_MLB 65 +#define MX53_INT_ASRC 66 #define MX53_INT_SPDIF 67 #define MX53_INT_SIM_DAT 68 #define MX53_INT_IIM 69 diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h index 4ac53ce97c24..09879235a9f5 100644 --- a/arch/arm/plat-mxc/include/mach/mxc.h +++ b/arch/arm/plat-mxc/include/mach/mxc.h @@ -68,7 +68,7 @@ extern unsigned int __mxc_cpu_type; #endif -#ifdef CONFIG_ARCH_MX1 +#ifdef CONFIG_SOC_IMX1 # ifdef mxc_cpu_type # undef mxc_cpu_type # define mxc_cpu_type __mxc_cpu_type @@ -80,7 +80,7 @@ extern unsigned int __mxc_cpu_type; # define cpu_is_mx1() (0) #endif -#ifdef CONFIG_MACH_MX21 +#ifdef CONFIG_SOC_IMX21 # ifdef mxc_cpu_type # undef mxc_cpu_type # define mxc_cpu_type __mxc_cpu_type @@ -92,7 +92,7 @@ extern unsigned int __mxc_cpu_type; # define cpu_is_mx21() (0) #endif -#ifdef CONFIG_ARCH_MX25 +#ifdef CONFIG_SOC_IMX25 # ifdef mxc_cpu_type # undef mxc_cpu_type # define mxc_cpu_type __mxc_cpu_type @@ -104,7 +104,7 @@ extern unsigned int __mxc_cpu_type; # define cpu_is_mx25() (0) #endif -#ifdef CONFIG_MACH_MX27 +#ifdef CONFIG_SOC_IMX27 # ifdef mxc_cpu_type # undef mxc_cpu_type # define mxc_cpu_type __mxc_cpu_type diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h index d61d5c74817c..10343d1f87e1 100644 --- a/arch/arm/plat-mxc/include/mach/timex.h +++ b/arch/arm/plat-mxc/include/mach/timex.h @@ -16,16 +16,7 @@ #ifndef __ASM_ARCH_MXC_TIMEX_H__ #define __ASM_ARCH_MXC_TIMEX_H__ -#if defined CONFIG_ARCH_MX1 -#define CLOCK_TICK_RATE 16000000 -#elif defined CONFIG_ARCH_MX2 -#define CLOCK_TICK_RATE 13300000 -#elif defined CONFIG_ARCH_MX3 -#define CLOCK_TICK_RATE 16625000 -#elif defined CONFIG_ARCH_MX25 -#define CLOCK_TICK_RATE 16000000 -#elif defined CONFIG_ARCH_MX5 -#define CLOCK_TICK_RATE 8000000 -#endif +/* Bogus value */ +#define CLOCK_TICK_RATE 12345678 #endif /* __ASM_ARCH_MXC_TIMEX_H__ */ diff --git a/arch/arm/plat-mxc/iomux-v1.c b/arch/arm/plat-mxc/iomux-v1.c index 3238c10d4e02..1f73963bc13e 100644 --- a/arch/arm/plat-mxc/iomux-v1.c +++ b/arch/arm/plat-mxc/iomux-v1.c @@ -157,7 +157,7 @@ EXPORT_SYMBOL(mxc_gpio_mode); static int imx_iomuxv1_setup_multiple(const int *list, unsigned count) { size_t i; - int ret; + int ret = 0; for (i = 0; i < count; ++i) { ret = mxc_gpio_mode(list[i]); @@ -172,45 +172,13 @@ static int imx_iomuxv1_setup_multiple(const int *list, unsigned count) int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count, const char *label) { - size_t i; int ret; - for (i = 0; i < count; ++i) { - unsigned gpio = pin_list[i] & (GPIO_PIN_MASK | GPIO_PORT_MASK); - - ret = gpio_request(gpio, label); - if (ret) - goto err_gpio_request; - } - ret = imx_iomuxv1_setup_multiple(pin_list, count); - if (ret) - goto err_setup; - - return 0; - -err_setup: - BUG_ON(i != count); - -err_gpio_request: - mxc_gpio_release_multiple_pins(pin_list, i); - return ret; } EXPORT_SYMBOL(mxc_gpio_setup_multiple_pins); -void mxc_gpio_release_multiple_pins(const int *pin_list, int count) -{ - size_t i; - - for (i = 0; i < count; ++i) { - unsigned gpio = pin_list[i] & (GPIO_PIN_MASK | GPIO_PORT_MASK); - - gpio_free(gpio); - } -} -EXPORT_SYMBOL(mxc_gpio_release_multiple_pins); - int __init imx_iomuxv1_init(void __iomem *base, int numports) { imx_iomuxv1_baseaddr = base; diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c index 7a61ef8f471a..761c3c940a68 100644 --- a/arch/arm/plat-mxc/pwm.c +++ b/arch/arm/plat-mxc/pwm.c @@ -214,14 +214,14 @@ static int __devinit mxc_pwm_probe(struct platform_device *pdev) goto err_free_clk; } - r = request_mem_region(r->start, r->end - r->start + 1, pdev->name); + r = request_mem_region(r->start, resource_size(r), pdev->name); if (r == NULL) { dev_err(&pdev->dev, "failed to request memory resource\n"); ret = -EBUSY; goto err_free_clk; } - pwm->mmio_base = ioremap(r->start, r->end - r->start + 1); + pwm->mmio_base = ioremap(r->start, resource_size(r)); if (pwm->mmio_base == NULL) { dev_err(&pdev->dev, "failed to ioremap() registers\n"); ret = -ENODEV; @@ -236,7 +236,7 @@ static int __devinit mxc_pwm_probe(struct platform_device *pdev) return 0; err_free_mem: - release_mem_region(r->start, r->end - r->start + 1); + release_mem_region(r->start, resource_size(r)); err_free_clk: clk_put(pwm->clk); err_free: @@ -260,7 +260,7 @@ static int __devexit mxc_pwm_remove(struct platform_device *pdev) iounmap(pwm->mmio_base); r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(r->start, r->end - r->start + 1); + release_mem_region(r->start, resource_size(r)); clk_put(pwm->clk); diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c index 57f9395f87ce..710f2e7da4ce 100644 --- a/arch/arm/plat-mxc/tzic.c +++ b/arch/arm/plat-mxc/tzic.c @@ -49,6 +49,8 @@ void __iomem *tzic_base; /* Used as irq controller base in entry-macro.S */ +#define TZIC_NUM_IRQS 128 + #ifdef CONFIG_FIQ static int tzic_set_irq_fiq(unsigned int irq, unsigned int type) { @@ -166,7 +168,7 @@ void __init tzic_init_irq(void __iomem *irqbase) /* all IRQ no FIQ Warning :: No selection */ - for (i = 0; i < MXC_INTERNAL_IRQS; i++) { + for (i = 0; i < TZIC_NUM_IRQS; i++) { irq_set_chip_and_handler(i, &mxc_tzic_chip.base, handle_level_irq); set_irq_flags(i, IRQF_VALID); |