diff options
Diffstat (limited to 'arch/arm/plat-s3c/include/plat')
| -rw-r--r-- | arch/arm/plat-s3c/include/plat/debug-macro.S | 75 | ||||
| -rw-r--r-- | arch/arm/plat-s3c/include/plat/regs-serial.h | 232 | ||||
| -rw-r--r-- | arch/arm/plat-s3c/include/plat/regs-timer.h | 115 |
3 files changed, 422 insertions, 0 deletions
diff --git a/arch/arm/plat-s3c/include/plat/debug-macro.S b/arch/arm/plat-s3c/include/plat/debug-macro.S new file mode 100644 index 000000000000..4aa7e2e6c001 --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/debug-macro.S @@ -0,0 +1,75 @@ +/* linux/include/asm-arm/plat-s3c/debug-macro.S + * + * Copyright 2005, 2007 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <plat/regs-serial.h> + +/* The S3C2440 implementations are used by default as they are the + * most widely re-used */ + + .macro fifo_level_s3c2440 rd, rx + ldr \rd, [ \rx, # S3C2410_UFSTAT ] + and \rd, \rd, #S3C2440_UFSTAT_TXMASK + .endm + +#ifndef fifo_level +#define fifo_level fifo_level_s3c2410 +#endif + + .macro fifo_full_s3c2440 rd, rx + ldr \rd, [ \rx, # S3C2410_UFSTAT ] + tst \rd, #S3C2440_UFSTAT_TXFULL + .endm + +#ifndef fifo_full +#define fifo_full fifo_full_s3c2440 +#endif + + .macro senduart,rd,rx + strb \rd, [\rx, # S3C2410_UTXH ] + .endm + + .macro busyuart, rd, rx + ldr \rd, [ \rx, # S3C2410_UFCON ] + tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled? + beq 1001f @ + @ FIFO enabled... +1003: + fifo_full \rd, \rx + bne 1003b + b 1002f + +1001: + @ busy waiting for non fifo + ldr \rd, [ \rx, # S3C2410_UTRSTAT ] + tst \rd, #S3C2410_UTRSTAT_TXFE + beq 1001b + +1002: @ exit busyuart + .endm + + .macro waituart,rd,rx + ldr \rd, [ \rx, # S3C2410_UFCON ] + tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled? + beq 1001f @ + @ FIFO enabled... +1003: + fifo_level \rd, \rx + teq \rd, #0 + bne 1003b + b 1002f +1001: + @ idle waiting for non fifo + ldr \rd, [ \rx, # S3C2410_UTRSTAT ] + tst \rd, #S3C2410_UTRSTAT_TXFE + beq 1001b + +1002: @ exit busyuart + .endm diff --git a/arch/arm/plat-s3c/include/plat/regs-serial.h b/arch/arm/plat-s3c/include/plat/regs-serial.h new file mode 100644 index 000000000000..a0daa647b92c --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/regs-serial.h @@ -0,0 +1,232 @@ +/* arch/arm/mach-s3c2410/include/mach/regs-serial.h + * + * From linux/include/asm-arm/hardware/serial_s3c2410.h + * + * Internal header file for Samsung S3C2410 serial ports (UART0-2) + * + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * + * Additional defines, (c) 2003 Simtec Electronics (linux@simtec.co.uk) + * + * Adapted from: + * + * Internal header file for MX1ADS serial ports (UART1 & 2) + * + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#ifndef __ASM_ARM_REGS_SERIAL_H +#define __ASM_ARM_REGS_SERIAL_H + +#define S3C24XX_VA_UART0 (S3C_VA_UART) +#define S3C24XX_VA_UART1 (S3C_VA_UART + 0x4000 ) +#define S3C24XX_VA_UART2 (S3C_VA_UART + 0x8000 ) +#define S3C24XX_VA_UART3 (S3C_VA_UART + 0xC000 ) + +#define S3C2410_PA_UART0 (S3C24XX_PA_UART) +#define S3C2410_PA_UART1 (S3C24XX_PA_UART + 0x4000 ) +#define S3C2410_PA_UART2 (S3C24XX_PA_UART + 0x8000 ) +#define S3C2443_PA_UART3 (S3C24XX_PA_UART + 0xC000 ) + +#define S3C2410_URXH (0x24) +#define S3C2410_UTXH (0x20) +#define S3C2410_ULCON (0x00) +#define S3C2410_UCON (0x04) +#define S3C2410_UFCON (0x08) +#define S3C2410_UMCON (0x0C) +#define S3C2410_UBRDIV (0x28) +#define S3C2410_UTRSTAT (0x10) +#define S3C2410_UERSTAT (0x14) +#define S3C2410_UFSTAT (0x18) +#define S3C2410_UMSTAT (0x1C) + +#define S3C2410_LCON_CFGMASK ((0xF<<3)|(0x3)) + +#define S3C2410_LCON_CS5 (0x0) +#define S3C2410_LCON_CS6 (0x1) +#define S3C2410_LCON_CS7 (0x2) +#define S3C2410_LCON_CS8 (0x3) +#define S3C2410_LCON_CSMASK (0x3) + +#define S3C2410_LCON_PNONE (0x0) +#define S3C2410_LCON_PEVEN (0x5 << 3) +#define S3C2410_LCON_PODD (0x4 << 3) +#define S3C2410_LCON_PMASK (0x7 << 3) + +#define S3C2410_LCON_STOPB (1<<2) +#define S3C2410_LCON_IRM (1<<6) + +#define S3C2440_UCON_CLKMASK (3<<10) +#define S3C2440_UCON_PCLK (0<<10) +#define S3C2440_UCON_UCLK (1<<10) +#define S3C2440_UCON_PCLK2 (2<<10) +#define S3C2440_UCON_FCLK (3<<10) +#define S3C2443_UCON_EPLL (3<<10) + +#define S3C2440_UCON2_FCLK_EN (1<<15) +#define S3C2440_UCON0_DIVMASK (15 << 12) +#define S3C2440_UCON1_DIVMASK (15 << 12) +#define S3C2440_UCON2_DIVMASK (7 << 12) +#define S3C2440_UCON_DIVSHIFT (12) + +#define S3C2412_UCON_CLKMASK (3<<10) +#define S3C2412_UCON_UCLK (1<<10) +#define S3C2412_UCON_USYSCLK (3<<10) +#define S3C2412_UCON_PCLK (0<<10) +#define S3C2412_UCON_PCLK2 (2<<10) + +#define S3C2410_UCON_UCLK (1<<10) +#define S3C2410_UCON_SBREAK (1<<4) + +#define S3C2410_UCON_TXILEVEL (1<<9) +#define S3C2410_UCON_RXILEVEL (1<<8) +#define S3C2410_UCON_TXIRQMODE (1<<2) +#define S3C2410_UCON_RXIRQMODE (1<<0) +#define S3C2410_UCON_RXFIFO_TOI (1<<7) +#define S3C2443_UCON_RXERR_IRQEN (1<<6) +#define S3C2443_UCON_LOOPBACK (1<<5) + +#define S3C2410_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI) + +#define S3C2410_UFCON_FIFOMODE (1<<0) +#define S3C2410_UFCON_TXTRIG0 (0<<6) +#define S3C2410_UFCON_RXTRIG8 (1<<4) +#define S3C2410_UFCON_RXTRIG12 (2<<4) + +/* S3C2440 FIFO trigger levels */ +#define S3C2440_UFCON_RXTRIG1 (0<<4) +#define S3C2440_UFCON_RXTRIG8 (1<<4) +#define S3C2440_UFCON_RXTRIG16 (2<<4) +#define S3C2440_UFCON_RXTRIG32 (3<<4) + +#define S3C2440_UFCON_TXTRIG0 (0<<6) +#define S3C2440_UFCON_TXTRIG16 (1<<6) +#define S3C2440_UFCON_TXTRIG32 (2<<6) +#define S3C2440_UFCON_TXTRIG48 (3<<6) + +#define S3C2410_UFCON_RESETBOTH (3<<1) +#define S3C2410_UFCON_RESETTX (1<<2) +#define S3C2410_UFCON_RESETRX (1<<1) + +#define S3C2410_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S3C2410_UFCON_TXTRIG0 | \ + S3C2410_UFCON_RXTRIG8 ) + +#define S3C2410_UMCOM_AFC (1<<4) +#define S3C2410_UMCOM_RTS_LOW (1<<0) + +#define S3C2412_UMCON_AFC_63 (0<<5) /* same as s3c2443 */ +#define S3C2412_UMCON_AFC_56 (1<<5) +#define S3C2412_UMCON_AFC_48 (2<<5) +#define S3C2412_UMCON_AFC_40 (3<<5) +#define S3C2412_UMCON_AFC_32 (4<<5) +#define S3C2412_UMCON_AFC_24 (5<<5) +#define S3C2412_UMCON_AFC_16 (6<<5) +#define S3C2412_UMCON_AFC_8 (7<<5) + +#define S3C2410_UFSTAT_TXFULL (1<<9) +#define S3C2410_UFSTAT_RXFULL (1<<8) +#define S3C2410_UFSTAT_TXMASK (15<<4) +#define S3C2410_UFSTAT_TXSHIFT (4) +#define S3C2410_UFSTAT_RXMASK (15<<0) +#define S3C2410_UFSTAT_RXSHIFT (0) + +/* UFSTAT S3C2443 same as S3C2440 */ +#define S3C2440_UFSTAT_TXFULL (1<<14) +#define S3C2440_UFSTAT_RXFULL (1<<6) +#define S3C2440_UFSTAT_TXSHIFT (8) +#define S3C2440_UFSTAT_RXSHIFT (0) +#define S3C2440_UFSTAT_TXMASK (63<<8) +#define S3C2440_UFSTAT_RXMASK (63) + +#define S3C2410_UTRSTAT_TXE (1<<2) +#define S3C2410_UTRSTAT_TXFE (1<<1) +#define S3C2410_UTRSTAT_RXDR (1<<0) + +#define S3C2410_UERSTAT_OVERRUN (1<<0) +#define S3C2410_UERSTAT_FRAME (1<<2) +#define S3C2410_UERSTAT_BREAK (1<<3) +#define S3C2443_UERSTAT_PARITY (1<<1) + +#define S3C2410_UERSTAT_ANY (S3C2410_UERSTAT_OVERRUN | \ + S3C2410_UERSTAT_FRAME | \ + S3C2410_UERSTAT_BREAK) + +#define S3C2410_UMSTAT_CTS (1<<0) +#define S3C2410_UMSTAT_DeltaCTS (1<<2) + +#define S3C2443_DIVSLOT (0x2C) + +#ifndef __ASSEMBLY__ + +/* struct s3c24xx_uart_clksrc + * + * this structure defines a named clock source that can be used for the + * uart, so that the best clock can be selected for the requested baud + * rate. + * + * min_baud and max_baud define the range of baud-rates this clock is + * acceptable for, if they are both zero, it is assumed any baud rate that + * can be generated from this clock will be used. + * + * divisor gives the divisor from the clock to the one seen by the uart +*/ + +struct s3c24xx_uart_clksrc { + const char *name; + unsigned int divisor; + unsigned int min_baud; + unsigned int max_baud; +}; + +/* configuration structure for per-machine configurations for the + * serial port + * + * the pointer is setup by the machine specific initialisation from the + * arch/arm/mach-s3c2410/ directory. +*/ + +struct s3c2410_uartcfg { + unsigned char hwport; /* hardware port number */ + unsigned char unused; + unsigned short flags; + upf_t uart_flags; /* default uart flags */ + + unsigned long ucon; /* value of ucon for port */ + unsigned long ulcon; /* value of ulcon for port */ + unsigned long ufcon; /* value of ufcon for port */ + + struct s3c24xx_uart_clksrc *clocks; + unsigned int clocks_size; +}; + +/* s3c24xx_uart_devs + * + * this is exported from the core as we cannot use driver_register(), + * or platform_add_device() before the console_initcall() +*/ + +extern struct platform_device *s3c24xx_uart_devs[3]; + +#endif /* __ASSEMBLY__ */ + +#endif /* __ASM_ARM_REGS_SERIAL_H */ + diff --git a/arch/arm/plat-s3c/include/plat/regs-timer.h b/arch/arm/plat-s3c/include/plat/regs-timer.h new file mode 100644 index 000000000000..cc0eedd53e38 --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/regs-timer.h @@ -0,0 +1,115 @@ +/* arch/arm/mach-s3c2410/include/mach/regs-timer.h + * + * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 Timer configuration +*/ + + +#ifndef __ASM_ARCH_REGS_TIMER_H +#define __ASM_ARCH_REGS_TIMER_H + +#define S3C_TIMERREG(x) (S3C_VA_TIMER + (x)) +#define S3C_TIMERREG2(tmr,reg) S3C_TIMERREG((reg)+0x0c+((tmr)*0x0c)) + +#define S3C2410_TCFG0 S3C_TIMERREG(0x00) +#define S3C2410_TCFG1 S3C_TIMERREG(0x04) +#define S3C2410_TCON S3C_TIMERREG(0x08) + +#define S3C2410_TCFG_PRESCALER0_MASK (255<<0) +#define S3C2410_TCFG_PRESCALER1_MASK (255<<8) +#define S3C2410_TCFG_PRESCALER1_SHIFT (8) +#define S3C2410_TCFG_DEADZONE_MASK (255<<16) +#define S3C2410_TCFG_DEADZONE_SHIFT (16) + +#define S3C2410_TCFG1_MUX4_DIV2 (0<<16) +#define S3C2410_TCFG1_MUX4_DIV4 (1<<16) +#define S3C2410_TCFG1_MUX4_DIV8 (2<<16) +#define S3C2410_TCFG1_MUX4_DIV16 (3<<16) +#define S3C2410_TCFG1_MUX4_TCLK1 (4<<16) +#define S3C2410_TCFG1_MUX4_MASK (15<<16) +#define S3C2410_TCFG1_MUX4_SHIFT (16) + +#define S3C2410_TCFG1_MUX3_DIV2 (0<<12) +#define S3C2410_TCFG1_MUX3_DIV4 (1<<12) +#define S3C2410_TCFG1_MUX3_DIV8 (2<<12) +#define S3C2410_TCFG1_MUX3_DIV16 (3<<12) +#define S3C2410_TCFG1_MUX3_TCLK1 (4<<12) +#define S3C2410_TCFG1_MUX3_MASK (15<<12) + + +#define S3C2410_TCFG1_MUX2_DIV2 (0<<8) +#define S3C2410_TCFG1_MUX2_DIV4 (1<<8) +#define S3C2410_TCFG1_MUX2_DIV8 (2<<8) +#define S3C2410_TCFG1_MUX2_DIV16 (3<<8) +#define S3C2410_TCFG1_MUX2_TCLK1 (4<<8) +#define S3C2410_TCFG1_MUX2_MASK (15<<8) + + +#define S3C2410_TCFG1_MUX1_DIV2 (0<<4) +#define S3C2410_TCFG1_MUX1_DIV4 (1<<4) +#define S3C2410_TCFG1_MUX1_DIV8 (2<<4) +#define S3C2410_TCFG1_MUX1_DIV16 (3<<4) +#define S3C2410_TCFG1_MUX1_TCLK0 (4<<4) +#define S3C2410_TCFG1_MUX1_MASK (15<<4) + +#define S3C2410_TCFG1_MUX0_DIV2 (0<<0) +#define S3C2410_TCFG1_MUX0_DIV4 (1<<0) +#define S3C2410_TCFG1_MUX0_DIV8 (2<<0) +#define S3C2410_TCFG1_MUX0_DIV16 (3<<0) +#define S3C2410_TCFG1_MUX0_TCLK0 (4<<0) +#define S3C2410_TCFG1_MUX0_MASK (15<<0) + +#define S3C2410_TCFG1_MUX_DIV2 (0<<0) +#define S3C2410_TCFG1_MUX_DIV4 (1<<0) +#define S3C2410_TCFG1_MUX_DIV8 (2<<0) +#define S3C2410_TCFG1_MUX_DIV16 (3<<0) +#define S3C2410_TCFG1_MUX_TCLK (4<<0) +#define S3C2410_TCFG1_MUX_MASK (15<<0) + +#define S3C2410_TCFG1_SHIFT(x) ((x) * 4) + +/* for each timer, we have an count buffer, an compare buffer and + * an observation buffer +*/ + +/* WARNING - timer 4 has no buffer reg, and it's observation is at +4 */ + +#define S3C2410_TCNTB(tmr) S3C_TIMERREG2(tmr, 0x00) +#define S3C2410_TCMPB(tmr) S3C_TIMERREG2(tmr, 0x04) +#define S3C2410_TCNTO(tmr) S3C_TIMERREG2(tmr, (((tmr) == 4) ? 0x04 : 0x08)) + +#define S3C2410_TCON_T4RELOAD (1<<22) +#define S3C2410_TCON_T4MANUALUPD (1<<21) +#define S3C2410_TCON_T4START (1<<20) + +#define S3C2410_TCON_T3RELOAD (1<<19) +#define S3C2410_TCON_T3INVERT (1<<18) +#define S3C2410_TCON_T3MANUALUPD (1<<17) +#define S3C2410_TCON_T3START (1<<16) + +#define S3C2410_TCON_T2RELOAD (1<<15) +#define S3C2410_TCON_T2INVERT (1<<14) +#define S3C2410_TCON_T2MANUALUPD (1<<13) +#define S3C2410_TCON_T2START (1<<12) + +#define S3C2410_TCON_T1RELOAD (1<<11) +#define S3C2410_TCON_T1INVERT (1<<10) +#define S3C2410_TCON_T1MANUALUPD (1<<9) +#define S3C2410_TCON_T1START (1<<8) + +#define S3C2410_TCON_T0DEADZONE (1<<4) +#define S3C2410_TCON_T0RELOAD (1<<3) +#define S3C2410_TCON_T0INVERT (1<<2) +#define S3C2410_TCON_T0MANUALUPD (1<<1) +#define S3C2410_TCON_T0START (1<<0) + +#endif /* __ASM_ARCH_REGS_TIMER_H */ + + + |