1 files changed, 0 insertions, 127 deletions
diff --git a/arch/avr32/boards/atstk1000/setup.c b/arch/avr32/boards/atstk1000/setup.c
deleted file mode 100644
index b6b88f5e0b43..000000000000
--- a/arch/avr32/boards/atstk1000/setup.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * ATSTK1000 board-specific setup code.
- *
- * Copyright (C) 2005-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/bootmem.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/types.h>
-#include <linux/linkage.h>
-
-#include <video/atmel_lcdc.h>
-
-#include <asm/setup.h>
-
-#include <mach/at32ap700x.h>
-#include <mach/board.h>
-#include <mach/portmux.h>
-
-#include "atstk1000.h"
-
-/* Initialized by bootloader-specific startup code. */
-struct tag *bootloader_tags __initdata;
-
-static struct fb_videomode __initdata ltv350qv_modes[] = {
-	{
-		.name		= "320x240 @ 75",
-		.refresh	= 75,
-		.xres		= 320,		.yres		= 240,
-		.pixclock	= KHZ2PICOS(6891),
-
-		.left_margin	= 17,		.right_margin	= 33,
-		.upper_margin	= 10,		.lower_margin	= 10,
-		.hsync_len	= 16,		.vsync_len	= 1,
-
-		.sync		= 0,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-};
-
-static struct fb_monspecs __initdata atstk1000_default_monspecs = {
-	.manufacturer		= "SNG",
-	.monitor		= "LTV350QV",
-	.modedb			= ltv350qv_modes,
-	.modedb_len		= ARRAY_SIZE(ltv350qv_modes),
-	.hfmin			= 14820,
-	.hfmax			= 22230,
-	.vfmin			= 60,
-	.vfmax			= 90,
-	.dclkmax		= 30000000,
-};
-
-struct atmel_lcdfb_pdata __initdata atstk1000_lcdc_data = {
-	.default_bpp		= 24,
-	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
-	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
-				   | ATMEL_LCDC_INVCLK
-				   | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
-				   | ATMEL_LCDC_MEMOR_BIG),
-	.default_monspecs	= &atstk1000_default_monspecs,
-	.guard_time		= 2,
-};
-
-#ifdef CONFIG_BOARD_ATSTK1000_J2_LED
-#include <linux/leds.h>
-
-static struct gpio_led stk1000_j2_led[] = {
-#ifdef CONFIG_BOARD_ATSTK1000_J2_LED8
-#define LEDSTRING "J2 jumpered to LED8"
-	{ .name = "led0:amber", .gpio = GPIO_PIN_PB( 8), },
-	{ .name = "led1:amber", .gpio = GPIO_PIN_PB( 9), },
-	{ .name = "led2:amber", .gpio = GPIO_PIN_PB(10), },
-	{ .name = "led3:amber", .gpio = GPIO_PIN_PB(13), },
-	{ .name = "led4:amber", .gpio = GPIO_PIN_PB(14), },
-	{ .name = "led5:amber", .gpio = GPIO_PIN_PB(15), },
-	{ .name = "led6:amber", .gpio = GPIO_PIN_PB(16), },
-	{ .name = "led7:amber", .gpio = GPIO_PIN_PB(30),
-			.default_trigger = "heartbeat", },
-#else	/* RGB */
-#define LEDSTRING "J2 jumpered to RGB LEDs"
-	{ .name = "r1:red",     .gpio = GPIO_PIN_PB( 8), },
-	{ .name = "g1:green",   .gpio = GPIO_PIN_PB(10), },
-	{ .name = "b1:blue",    .gpio = GPIO_PIN_PB(14), },
-
-	{ .name = "r2:red",     .gpio = GPIO_PIN_PB( 9),
-			.default_trigger = "heartbeat", },
-	{ .name = "g2:green",   .gpio = GPIO_PIN_PB(13), },
-	{ .name = "b2:blue",    .gpio = GPIO_PIN_PB(15),
-			.default_trigger = "heartbeat", },
-	/* PB16, PB30 unused */
-#endif
-};
-
-static struct gpio_led_platform_data stk1000_j2_led_data = {
-	.num_leds	= ARRAY_SIZE(stk1000_j2_led),
-	.leds		= stk1000_j2_led,
-};
-
-static struct platform_device stk1000_j2_led_dev = {
-	.name		= "leds-gpio",
-	.id		= 2,	/* gpio block J2 */
-	.dev		= {
-		.platform_data	= &stk1000_j2_led_data,
-	},
-};
-
-void __init atstk1000_setup_j2_leds(void)
-{
-	unsigned	i;
-
-	for (i = 0; i < ARRAY_SIZE(stk1000_j2_led); i++)
-		at32_select_gpio(stk1000_j2_led[i].gpio, AT32_GPIOF_OUTPUT);
-
-	printk("STK1000: " LEDSTRING "\n");
-	platform_device_register(&stk1000_j2_led_dev);
-}
-#else /* CONFIG_BOARD_ATSTK1000_J2_LED */
-void __init atstk1000_setup_j2_leds(void)
-{
-
-}
-#endif /* CONFIG_BOARD_ATSTK1000_J2_LED */