diff options
Diffstat (limited to 'arch/blackfin/mach-bf527/boards/ezbrd.c')
| -rw-r--r-- | arch/blackfin/mach-bf527/boards/ezbrd.c | 76 |
1 files changed, 37 insertions, 39 deletions
diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c index 50bda79194e5..a3a572352769 100644 --- a/arch/blackfin/mach-bf527/boards/ezbrd.c +++ b/arch/blackfin/mach-bf527/boards/ezbrd.c @@ -36,7 +36,7 @@ const char bfin_board_name[] = "ADI BF526-EZBRD"; * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) static struct resource musb_resources[] = { [0] = { .start = 0xffc03800, @@ -98,7 +98,7 @@ static struct platform_device musb_device = { }; #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition ezbrd_partitions[] = { { .name = "bootloader(nor)", @@ -138,7 +138,7 @@ static struct platform_device ezbrd_flash_device = { }; #endif -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) static struct mtd_partition partition_info[] = { { .name = "bootloader(nand)", @@ -188,7 +188,7 @@ static struct platform_device bf5xx_nand_device = { }; #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, @@ -196,7 +196,7 @@ static struct platform_device rtc_device = { #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) #include <linux/bfin_mac.h> static const unsigned short bfin_mac_peripherals[] = P_RMII0; @@ -229,8 +229,7 @@ static struct platform_device bfin_mac_device = { }; #endif -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -257,13 +256,13 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) static const struct ad7877_platform_data bfin_ad7877_ts_info = { .model = 7877, .vref_delay_usecs = 50, /* internal, no capacitor */ @@ -279,7 +278,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879) #include <linux/spi/ad7879.h> static const struct ad7879_platform_data bfin_ad7879_ts_info = { .model = 7879, /* Model = AD7879 */ @@ -297,8 +296,7 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = { #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -311,7 +309,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ @@ -321,7 +319,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) { .modalias = "ad7877", .platform_data = &bfin_ad7877_ts_info, @@ -331,7 +329,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 2, }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI) { .modalias = "ad7879", .platform_data = &bfin_ad7879_ts_info, @@ -342,7 +340,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_CPHA | SPI_CPOL, }, #endif -#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ +#if IS_ENABLED(CONFIG_SND_SOC_WM8731) \ && defined(CONFIG_SND_SOC_WM8731_SPI) { .modalias = "wm8731", @@ -352,7 +350,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_0, }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -360,7 +358,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 1, }, #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) { .modalias = "bfin-lq035q1-spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -371,7 +369,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI controller data */ static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, @@ -409,7 +407,7 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -520,7 +518,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -575,7 +573,7 @@ static struct platform_device bfin_sir1_device = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; static struct resource bfin_twi0_resource[] = { @@ -603,12 +601,12 @@ static struct platform_device i2c_bfin_twi_device = { #endif static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, #endif -#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE) +#if IS_ENABLED(CONFIG_INPUT_PCF8574) { I2C_BOARD_INFO("pcf8574_keypad", 0x27), .irq = IRQ_PF8, @@ -616,7 +614,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #endif }; -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -687,7 +685,7 @@ static struct platform_device bfin_sport1_uart_device = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/input.h> #include <linux/gpio_keys.h> @@ -731,7 +729,7 @@ static struct platform_device bfin_dpmc = { }, }; -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) #include <asm/bfin-lq035q1.h> static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = { @@ -764,28 +762,28 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) &bf5xx_nand_device, #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) &musb_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) &bfin_mii_bus, &bfin_mac_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -794,11 +792,11 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) &bfin_lq035q1_device, #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -807,11 +805,11 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -820,11 +818,11 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) &ezbrd_flash_device, #endif }; |