summaryrefslogtreecommitdiffstats
path: root/arch/blackfin/mach-bf527/include/mach
diff options
context:
space:
mode:
Diffstat (limited to 'arch/blackfin/mach-bf527/include/mach')
-rw-r--r--arch/blackfin/mach-bf527/include/mach/anomaly.h10
-rw-r--r--arch/blackfin/mach-bf527/include/mach/bf527.h8
-rw-r--r--arch/blackfin/mach-bf527/include/mach/bfin_sir.h142
-rw-r--r--arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h102
-rw-r--r--arch/blackfin/mach-bf527/include/mach/dma.h32
-rw-r--r--arch/blackfin/mach-bf527/include/mach/gpio.h68
-rw-r--r--arch/blackfin/mach-bf527/include/mach/irq.h32
-rw-r--r--arch/blackfin/mach-bf527/include/mach/mem_init.h310
-rw-r--r--arch/blackfin/mach-bf527/include/mach/mem_map.h6
9 files changed, 158 insertions, 552 deletions
diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h
index 62373e61c585..035e8d835058 100644
--- a/arch/blackfin/mach-bf527/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h
@@ -28,7 +28,7 @@
/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
#define ANOMALY_05000074 (1)
/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
-#define ANOMALY_05000119 (1)
+#define ANOMALY_05000119 (1) /* note: brokenness is noted in documentation, not anomaly sheet */
/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
#define ANOMALY_05000122 (1)
/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
@@ -37,8 +37,6 @@
#define ANOMALY_05000265 (1)
/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
#define ANOMALY_05000310 (1)
-/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
-#define ANOMALY_05000312 (ANOMALY_BF527)
/* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
#define ANOMALY_05000313 (__SILICON_REVISION__ < 2)
/* Incorrect Access of OTP_STATUS During otp_write() Function */
@@ -153,6 +151,10 @@
#define ANOMALY_05000430 (ANOMALY_BF527 && __SILICON_REVISION__ > 1)
/* bfrom_SysControl() Does Not Clear SIC_IWR1 Before Executing PLL Programming Sequence */
#define ANOMALY_05000432 (ANOMALY_BF526)
+/* Certain SIC Registers are not Reset After Soft or Core Double Fault Reset */
+#define ANOMALY_05000435 ((ANOMALY_BF526 && __SILICON_REVISION__ < 1) || ANOMALY_BF527)
+/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
+#define ANOMALY_05000443 (1)
/* Anomalies that don't exist on this proc */
#define ANOMALY_05000125 (0)
@@ -168,7 +170,9 @@
#define ANOMALY_05000285 (0)
#define ANOMALY_05000307 (0)
#define ANOMALY_05000311 (0)
+#define ANOMALY_05000312 (0)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000363 (0)
+#define ANOMALY_05000412 (0)
#endif
diff --git a/arch/blackfin/mach-bf527/include/mach/bf527.h b/arch/blackfin/mach-bf527/include/mach/bf527.h
index 144f08d3f8ea..3832aab11e9a 100644
--- a/arch/blackfin/mach-bf527/include/mach/bf527.h
+++ b/arch/blackfin/mach-bf527/include/mach/bf527.h
@@ -110,7 +110,7 @@
#ifdef CONFIG_BF527
#define CPU "BF527"
-#define CPUID 0x27e4
+#define CPUID 0x27e0
#endif
#ifdef CONFIG_BF526
#define CPU "BF526"
@@ -118,7 +118,7 @@
#endif
#ifdef CONFIG_BF525
#define CPU "BF525"
-#define CPUID 0x27e4
+#define CPUID 0x27e0
#endif
#ifdef CONFIG_BF524
#define CPU "BF524"
@@ -126,7 +126,7 @@
#endif
#ifdef CONFIG_BF523
#define CPU "BF523"
-#define CPUID 0x27e4
+#define CPUID 0x27e0
#endif
#ifdef CONFIG_BF522
#define CPU "BF522"
@@ -134,7 +134,7 @@
#endif
#ifndef CPU
-#error Unknown CPU type - This kernel doesn't seem to be configured properly
+#error "Unknown CPU type - This kernel doesn't seem to be configured properly"
#endif
#endif /* __MACH_BF527_H__ */
diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_sir.h b/arch/blackfin/mach-bf527/include/mach/bfin_sir.h
deleted file mode 100644
index cfd8ad4f1f2c..000000000000
--- a/arch/blackfin/mach-bf527/include/mach/bfin_sir.h
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * Blackfin Infra-red Driver
- *
- * Copyright 2006-2008 Analog Devices Inc.
- *
- * Enter bugs at http://blackfin.uclinux.org/
- *
- * Licensed under the GPL-2 or later.
- *
- */
-
-#include <linux/serial.h>
-#include <asm/dma.h>
-#include <asm/portmux.h>
-
-#define SIR_UART_GET_CHAR(port) bfin_read16((port)->membase + OFFSET_RBR)
-#define SIR_UART_GET_DLL(port) bfin_read16((port)->membase + OFFSET_DLL)
-#define SIR_UART_GET_IER(port) bfin_read16((port)->membase + OFFSET_IER)
-#define SIR_UART_GET_DLH(port) bfin_read16((port)->membase + OFFSET_DLH)
-#define SIR_UART_GET_IIR(port) bfin_read16((port)->membase + OFFSET_IIR)
-#define SIR_UART_GET_LCR(port) bfin_read16((port)->membase + OFFSET_LCR)
-#define SIR_UART_GET_GCTL(port) bfin_read16((port)->membase + OFFSET_GCTL)
-
-#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v)
-#define SIR_UART_PUT_DLL(port, v) bfin_write16(((port)->membase + OFFSET_DLL), v)
-#define SIR_UART_PUT_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER), v)
-#define SIR_UART_PUT_DLH(port, v) bfin_write16(((port)->membase + OFFSET_DLH), v)
-#define SIR_UART_PUT_LCR(port, v) bfin_write16(((port)->membase + OFFSET_LCR), v)
-#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v)
-
-#ifdef CONFIG_SIR_BFIN_DMA
-struct dma_rx_buf {
- char *buf;
- int head;
- int tail;
- };
-#endif /* CONFIG_SIR_BFIN_DMA */
-
-struct bfin_sir_port {
- unsigned char __iomem *membase;
- unsigned int irq;
- unsigned int lsr;
- unsigned long clk;
- struct net_device *dev;
-#ifdef CONFIG_SIR_BFIN_DMA
- int tx_done;
- struct dma_rx_buf rx_dma_buf;
- struct timer_list rx_dma_timer;
- int rx_dma_nrows;
-#endif /* CONFIG_SIR_BFIN_DMA */
- unsigned int tx_dma_channel;
- unsigned int rx_dma_channel;
-};
-
-struct bfin_sir_port sir_ports[BFIN_UART_NR_PORTS];
-
-struct bfin_sir_port_res {
- unsigned long base_addr;
- int irq;
- unsigned int rx_dma_channel;
- unsigned int tx_dma_channel;
-};
-
-struct bfin_sir_port_res bfin_sir_port_resource[] = {
-#ifdef CONFIG_BFIN_SIR0
- {
- 0xFFC00400,
- IRQ_UART0_RX,
- CH_UART0_RX,
- CH_UART0_TX,
- },
-#endif
-#ifdef CONFIG_BFIN_SIR1
- {
- 0xFFC02000,
- IRQ_UART1_RX,
- CH_UART1_RX,
- CH_UART1_TX,
- },
-#endif
-};
-
-int nr_sirs = ARRAY_SIZE(bfin_sir_port_resource);
-
-struct bfin_sir_self {
- struct bfin_sir_port *sir_port;
- spinlock_t lock;
- unsigned int open;
- int speed;
- int newspeed;
-
- struct sk_buff *txskb;
- struct sk_buff *rxskb;
- struct net_device_stats stats;
- struct device *dev;
- struct irlap_cb *irlap;
- struct qos_info qos;
-
- iobuff_t tx_buff;
- iobuff_t rx_buff;
-
- struct work_struct work;
- int mtt;
-};
-
-static inline unsigned int SIR_UART_GET_LSR(struct bfin_sir_port *port)
-{
- unsigned int lsr = bfin_read16(port->membase + OFFSET_LSR);
- port->lsr |= (lsr & (BI|FE|PE|OE));
- return lsr | port->lsr;
-}
-
-static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port)
-{
- port->lsr = 0;
- bfin_read16(port->membase + OFFSET_LSR);
-}
-
-#define DRIVER_NAME "bfin_sir"
-
-static int bfin_sir_hw_init(void)
-{
- int ret = -ENODEV;
-#ifdef CONFIG_BFIN_SIR0
- ret = peripheral_request(P_UART0_TX, DRIVER_NAME);
- if (ret)
- return ret;
- ret = peripheral_request(P_UART0_RX, DRIVER_NAME);
- if (ret)
- return ret;
-#endif
-
-#ifdef CONFIG_BFIN_SIR1
- ret = peripheral_request(P_UART1_TX, DRIVER_NAME);
- if (ret)
- return ret;
- ret = peripheral_request(P_UART1_RX, DRIVER_NAME);
- if (ret)
- return ret;
-#endif
- return ret;
-}
diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h
index 9a814b9a12b9..1fe76d8e0403 100644
--- a/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h
+++ b/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h
@@ -31,7 +31,6 @@
#ifndef _CDEF_BF52X_H
#define _CDEF_BF52X_H
-#include <asm/system.h>
#include <asm/blackfin.h>
#include "defBF52x_base.h"
@@ -43,57 +42,9 @@
/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */
#define bfin_read_PLL_CTL() bfin_read16(PLL_CTL)
-/* Writing to PLL_CTL initiates a PLL relock sequence. */
-static __inline__ void bfin_write_PLL_CTL(unsigned int val)
-{
- unsigned long flags, iwr0, iwr1;
-
- if (val == bfin_read_PLL_CTL())
- return;
-
- local_irq_save(flags);
- /* Enable the PLL Wakeup bit in SIC IWR */
- iwr0 = bfin_read32(SIC_IWR0);
- iwr1 = bfin_read32(SIC_IWR1);
- /* Only allow PPL Wakeup) */
- bfin_write32(SIC_IWR0, IWR_ENABLE(0));
- bfin_write32(SIC_IWR1, 0);
-
- bfin_write16(PLL_CTL, val);
- SSYNC();
- asm("IDLE;");
-
- bfin_write32(SIC_IWR0, iwr0);
- bfin_write32(SIC_IWR1, iwr1);
- local_irq_restore(flags);
-}
#define bfin_read_PLL_DIV() bfin_read16(PLL_DIV)
#define bfin_write_PLL_DIV(val) bfin_write16(PLL_DIV, val)
#define bfin_read_VR_CTL() bfin_read16(VR_CTL)
-/* Writing to VR_CTL initiates a PLL relock sequence. */
-static __inline__ void bfin_write_VR_CTL(unsigned int val)
-{
- unsigned long flags, iwr0, iwr1;
-
- if (val == bfin_read_VR_CTL())
- return;
-
- local_irq_save(flags);
- /* Enable the PLL Wakeup bit in SIC IWR */
- iwr0 = bfin_read32(SIC_IWR0);
- iwr1 = bfin_read32(SIC_IWR1);
- /* Only allow PPL Wakeup) */
- bfin_write32(SIC_IWR0, IWR_ENABLE(0));
- bfin_write32(SIC_IWR1, 0);
-
- bfin_write16(VR_CTL, val);
- SSYNC();
- asm("IDLE;");
-
- bfin_write32(SIC_IWR0, iwr0);
- bfin_write32(SIC_IWR1, iwr1);
- local_irq_restore(flags);
-}
#define bfin_read_PLL_STAT() bfin_read16(PLL_STAT)
#define bfin_write_PLL_STAT(val) bfin_write16(PLL_STAT, val)
#define bfin_read_PLL_LOCKCNT() bfin_read16(PLL_LOCKCNT)
@@ -1201,4 +1152,57 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val)
#define bfin_read_NFC_DATA_RD() bfin_read16(NFC_DATA_RD)
#define bfin_write_NFC_DATA_RD(val) bfin_write16(NFC_DATA_RD, val)
+/* These need to be last due to the cdef/linux inter-dependencies */
+#include <asm/irq.h>
+
+/* Writing to PLL_CTL initiates a PLL relock sequence. */
+static __inline__ void bfin_write_PLL_CTL(unsigned int val)
+{
+ unsigned long flags, iwr0, iwr1;
+
+ if (val == bfin_read_PLL_CTL())
+ return;
+
+ local_irq_save_hw(flags);
+ /* Enable the PLL Wakeup bit in SIC IWR */
+ iwr0 = bfin_read32(SIC_IWR0);
+ iwr1 = bfin_read32(SIC_IWR1);
+ /* Only allow PPL Wakeup) */
+ bfin_write32(SIC_IWR0, IWR_ENABLE(0));
+ bfin_write32(SIC_IWR1, 0);
+
+ bfin_write16(PLL_CTL, val);
+ SSYNC();
+ asm("IDLE;");
+
+ bfin_write32(SIC_IWR0, iwr0);
+ bfin_write32(SIC_IWR1, iwr1);
+ local_irq_restore_hw(flags);
+}
+
+/* Writing to VR_CTL initiates a PLL relock sequence. */
+static __inline__ void bfin_write_VR_CTL(unsigned int val)
+{
+ unsigned long flags, iwr0, iwr1;
+
+ if (val == bfin_read_VR_CTL())
+ return;
+
+ local_irq_save_hw(flags);
+ /* Enable the PLL Wakeup bit in SIC IWR */
+ iwr0 = bfin_read32(SIC_IWR0);
+ iwr1 = bfin_read32(SIC_IWR1);
+ /* Only allow PPL Wakeup) */
+ bfin_write32(SIC_IWR0, IWR_ENABLE(0));
+ bfin_write32(SIC_IWR1, 0);
+
+ bfin_write16(VR_CTL, val);
+ SSYNC();
+ asm("IDLE;");
+
+ bfin_write32(SIC_IWR0, iwr0);
+ bfin_write32(SIC_IWR1, iwr1);
+ local_irq_restore_hw(flags);
+}
+
#endif /* _CDEF_BF52X_H */
diff --git a/arch/blackfin/mach-bf527/include/mach/dma.h b/arch/blackfin/mach-bf527/include/mach/dma.h
index 49dd693223e8..eb287da101a2 100644
--- a/arch/blackfin/mach-bf527/include/mach/dma.h
+++ b/arch/blackfin/mach-bf527/include/mach/dma.h
@@ -1,38 +1,14 @@
-/*
- * file: include/asm-blackfin/mach-bf527/dma.h
- * based on: include/asm-blackfin/mach-bf537/dma.h
- * author: Michael Hennerich (michael.hennerich@analog.com)
+/* mach/dma.h - arch-specific DMA defines
*
- * created:
- * description:
- * system DMA map
- * rev:
+ * Copyright 2004-2008 Analog Devices Inc.
*
- * modified:
- *
- *
- * bugs: enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose. see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Licensed under the GPL-2 or later.
*/
#ifndef _MACH_DMA_H_
#define _MACH_DMA_H_
-#define MAX_BLACKFIN_DMA_CHANNEL 16
+#define MAX_DMA_CHANNELS 16
#define CH_PPI 0 /* PPI receive/transmit or NFC */
#define CH_EMAC_RX 1 /* Ethernet MAC receive or HOSTDP */
diff --git a/arch/blackfin/mach-bf527/include/mach/gpio.h b/arch/blackfin/mach-bf527/include/mach/gpio.h
new file mode 100644
index 000000000000..06b6eebf0d49
--- /dev/null
+++ b/arch/blackfin/mach-bf527/include/mach/gpio.h
@@ -0,0 +1,68 @@
+/*
+ * File: arch/blackfin/mach-bf527/include/mach/gpio.h
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Copyright (C) 2008 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+
+#ifndef _MACH_GPIO_H_
+#define _MACH_GPIO_H_
+
+#define MAX_BLACKFIN_GPIOS 48
+
+#define GPIO_PF0 0
+#define GPIO_PF1 1
+#define GPIO_PF2 2
+#define GPIO_PF3 3
+#define GPIO_PF4 4
+#define GPIO_PF5 5
+#define GPIO_PF6 6
+#define GPIO_PF7 7
+#define GPIO_PF8 8
+#define GPIO_PF9 9
+#define GPIO_PF10 10
+#define GPIO_PF11 11
+#define GPIO_PF12 12
+#define GPIO_PF13 13
+#define GPIO_PF14 14
+#define GPIO_PF15 15
+#define GPIO_PG0 16
+#define GPIO_PG1 17
+#define GPIO_PG2 18
+#define GPIO_PG3 19
+#define GPIO_PG4 20
+#define GPIO_PG5 21
+#define GPIO_PG6 22
+#define GPIO_PG7 23
+#define GPIO_PG8 24
+#define GPIO_PG9 25
+#define GPIO_PG10 26
+#define GPIO_PG11 27
+#define GPIO_PG12 28
+#define GPIO_PG13 29
+#define GPIO_PG14 30
+#define GPIO_PG15 31
+#define GPIO_PH0 32
+#define GPIO_PH1 33
+#define GPIO_PH2 34
+#define GPIO_PH3 35
+#define GPIO_PH4 36
+#define GPIO_PH5 37
+#define GPIO_PH6 38
+#define GPIO_PH7 39
+#define GPIO_PH8 40
+#define GPIO_PH9 41
+#define GPIO_PH10 42
+#define GPIO_PH11 43
+#define GPIO_PH12 44
+#define GPIO_PH13 45
+#define GPIO_PH14 46
+#define GPIO_PH15 47
+
+#define PORT_F GPIO_PF0
+#define PORT_G GPIO_PG0
+#define PORT_H GPIO_PH0
+
+#endif /* _MACH_GPIO_H_ */
diff --git a/arch/blackfin/mach-bf527/include/mach/irq.h b/arch/blackfin/mach-bf527/include/mach/irq.h
index 4e2b3f2020e5..8ea660d8151f 100644
--- a/arch/blackfin/mach-bf527/include/mach/irq.h
+++ b/arch/blackfin/mach-bf527/include/mach/irq.h
@@ -96,14 +96,14 @@
#define IRQ_MAC_TX BFIN_IRQ(30) /* DMA2 Channel (MAC TX/NAND) */
#define IRQ_NFC BFIN_IRQ(30) /* DMA2 Channel (MAC TX/NAND) */
#define IRQ_PORTH_INTB BFIN_IRQ(31) /* Port H Interrupt B */
-#define IRQ_TMR0 BFIN_IRQ(32) /* Timer 0 */
-#define IRQ_TMR1 BFIN_IRQ(33) /* Timer 1 */
-#define IRQ_TMR2 BFIN_IRQ(34) /* Timer 2 */
-#define IRQ_TMR3 BFIN_IRQ(35) /* Timer 3 */
-#define IRQ_TMR4 BFIN_IRQ(36) /* Timer 4 */
-#define IRQ_TMR5 BFIN_IRQ(37) /* Timer 5 */
-#define IRQ_TMR6 BFIN_IRQ(38) /* Timer 6 */
-#define IRQ_TMR7 BFIN_IRQ(39) /* Timer 7 */
+#define IRQ_TIMER0 BFIN_IRQ(32) /* Timer 0 */
+#define IRQ_TIMER1 BFIN_IRQ(33) /* Timer 1 */
+#define IRQ_TIMER2 BFIN_IRQ(34) /* Timer 2 */
+#define IRQ_TIMER3 BFIN_IRQ(35) /* Timer 3 */
+#define IRQ_TIMER4 BFIN_IRQ(36) /* Timer 4 */
+#define IRQ_TIMER5 BFIN_IRQ(37) /* Timer 5 */
+#define IRQ_TIMER6 BFIN_IRQ(38) /* Timer 6 */
+#define IRQ_TIMER7 BFIN_IRQ(39) /* Timer 7 */
#define IRQ_PORTG_INTA BFIN_IRQ(40) /* Port G Interrupt A */
#define IRQ_PORTG_INTB BFIN_IRQ(41) /* Port G Interrupt B */
#define IRQ_MEM_DMA0 BFIN_IRQ(42) /* MDMA Stream 0 */
@@ -227,14 +227,14 @@
#define IRQ_PORTH_INTB_POS 28
/* IAR4 BIT FIELDS */
-#define IRQ_TMR0_POS 0
-#define IRQ_TMR1_POS 4
-#define IRQ_TMR2_POS 8
-#define IRQ_TMR3_POS 12
-#define IRQ_TMR4_POS 16
-#define IRQ_TMR5_POS 20
-#define IRQ_TMR6_POS 24
-#define IRQ_TMR7_POS 28
+#define IRQ_TIMER0_POS 0
+#define IRQ_TIMER1_POS 4
+#define IRQ_TIMER2_POS 8
+#define IRQ_TIMER3_POS 12
+#define IRQ_TIMER4_POS 16
+#define IRQ_TIMER5_POS 20
+#define IRQ_TIMER6_POS 24
+#define IRQ_TIMER7_POS 28
/* IAR5 BIT FIELDS */
#define IRQ_PORTG_INTA_POS 0
diff --git a/arch/blackfin/mach-bf527/include/mach/mem_init.h b/arch/blackfin/mach-bf527/include/mach/mem_init.h
deleted file mode 100644
index cbe03f4a5698..000000000000
--- a/arch/blackfin/mach-bf527/include/mach/mem_init.h
+++ /dev/null
@@ -1,310 +0,0 @@
-/*
- * File: include/asm-blackfin/mach-bf527/mem_init.h
- * Based on:
- * Author:
- *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- * Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#if (CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E || CONFIG_MEM_MT48LC16M8A2TG_75 || CONFIG_MEM_GENERIC_BOARD || CONFIG_MEM_MT48LC32M8A2_75 || CONFIG_MEM_MT48LC32M16A2TG_75)
-#if (CONFIG_SCLK_HZ > 119402985)
-#define SDRAM_tRP TRP_2
-#define SDRAM_tRP_num 2
-#define SDRAM_tRAS TRAS_7
-#define SDRAM_tRAS_num 7
-#define SDRAM_tRCD TRCD_2
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985)
-#define SDRAM_tRP TRP_2
-#define SDRAM_tRP_num 2
-#define SDRAM_tRAS TRAS_6
-#define SDRAM_tRAS_num 6
-#define SDRAM_tRCD TRCD_2
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612)
-#define SDRAM_tRP TRP_2
-#define SDRAM_tRP_num 2
-#define SDRAM_tRAS TRAS_5
-#define SDRAM_tRAS_num 5
-#define SDRAM_tRCD TRCD_2
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239)
-#define SDRAM_tRP TRP_2
-#define SDRAM_tRP_num 2
-#define SDRAM_tRAS TRAS_4
-#define SDRAM_tRAS_num 4
-#define SDRAM_tRCD TRCD_2
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866)
-#define SDRAM_tRP TRP_2
-#define SDRAM_tRP_num 2
-#define SDRAM_tRAS TRAS_3
-#define SDRAM_tRAS_num 3
-#define SDRAM_tRCD TRCD_2
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667)
-#define SDRAM_tRP TRP_1
-#define SDRAM_tRP_num 1
-#define SDRAM_tRAS TRAS_4
-#define SDRAM_tRAS_num 3
-#define SDRAM_tRCD TRCD_1
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493)
-#define SDRAM_tRP TRP_1
-#define SDRAM_tRP_num 1
-#define SDRAM_tRAS TRAS_3
-#define SDRAM_tRAS_num 3
-#define SDRAM_tRCD TRCD_1
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119)
-#define SDRAM_tRP TRP_1
-#define SDRAM_tRP_num 1
-#define SDRAM_tRAS TRAS_2
-#define SDRAM_tRAS_num 2
-#define SDRAM_tRCD TRCD_1
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ <= 29850746)
-#define SDRAM_tRP TRP_1
-#define SDRAM_tRP_num 1
-#define SDRAM_tRAS TRAS_1
-#define SDRAM_tRAS_num 1
-#define SDRAM_tRCD TRCD_1
-#define SDRAM_tWR TWR_2
-#endif
-#endif
-
-#if (CONFIG_MEM_MT48LC16M16A2TG_75)
- /*SDRAM INFORMATION: */
-#define SDRAM_Tref 64 /* Refresh period in milliseconds */
-#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
-#define SDRAM_CL CL_3
-#endif
-
-#if (CONFIG_MEM_MT48LC16M8A2TG_75)
- /*SDRAM INFORMATION: */
-#define SDRAM_Tref 64 /* Refresh period in milliseconds */
-#define SDRAM_NRA 4096 /* Number of row addresses in SDRAM */
-#define SDRAM_CL CL_3
-#endif
-
-#if (CONFIG_MEM_MT48LC32M8A2_75)
- /*SDRAM INFORMATION: */
-#define SDRAM_Tref 64 /* Refresh period in milliseconds */
-#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
-#define SDRAM_CL CL_3
-#endif
-
-#if (CONFIG_MEM_MT48LC64M4A2FB_7E)
- /*SDRAM INFORMATION: */
-#define SDRAM_Tref 64 /* Refresh period in milliseconds */
-#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
-#define SDRAM_CL CL_3
-#endif
-
-#if (CONFIG_MEM_GENERIC_BOARD)
- /*SDRAM INFORMATION: Modify this for your board */
-#define SDRAM_Tref 64 /* Refresh period in milliseconds */
-#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
-#define SDRAM_CL CL_3
-#endif
-
-#if (CONFIG_MEM_MT48LC32M16A2TG_75)
- /*SDRAM INFORMATION: */
-#define SDRAM_Tref 64 /* Refresh period in milliseconds */
-#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
-#define SDRAM_CL CL_3
-#endif
-
-/* Equation from section 17 (p17-46) of BF533 HRM */
-#define mem_SDRRC (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
-
-/* Enable SCLK Out */
-#define mem_SDGCTL (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS)
-
-#if defined CONFIG_CLKIN_HALF
-#define CLKIN_HALF 1
-#else
-#define CLKIN_HALF 0
-#endif
-
-#if defined CONFIG_PLL_BYPASS
-#define PLL_BYPASS 1
-#else
-#define PLL_BYPASS 0
-#endif
-
-/***************************************Currently Not Being Used *********************************/
-#define flash_EBIU_AMBCTL_WAT ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-#define flash_EBIU_AMBCTL_RAT ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-#define flash_EBIU_AMBCTL_HT ((CONFIG_FLASH_SPEED_BHT * 4) / (4000000000 / CONFIG_SCLK_HZ))
-#define flash_EBIU_AMBCTL_ST ((CONFIG_FLASH_SPEED_BST * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-#define flash_EBIU_AMBCTL_TT ((CONFIG_FLASH_SPEED_BTT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-
-#if (flash_EBIU_AMBCTL_TT > 3)
-#define flash_EBIU_AMBCTL0_TT B0TT_4
-#endif
-#if (flash_EBIU_AMBCTL_TT == 3)
-#define flash_EBIU_AMBCTL0_TT B0TT_3
-#endif
-#if (flash_EBIU_AMBCTL_TT == 2)
-#define flash_EBIU_AMBCTL0_TT B0TT_2
-#endif
-#if (flash_EBIU_AMBCTL_TT < 2)
-#define flash_EBIU_AMBCTL0_TT B0TT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_ST > 3)
-#define flash_EBIU_AMBCTL0_ST B0ST_4
-#endif
-#if (flash_EBIU_AMBCTL_ST == 3)
-#define flash_EBIU_AMBCTL0_ST B0ST_3
-#endif
-#if (flash_EBIU_AMBCTL_ST == 2)
-#define flash_EBIU_AMBCTL0_ST B0ST_2
-#endif
-#if (flash_EBIU_AMBCTL_ST < 2)
-#define flash_EBIU_AMBCTL0_ST B0ST_1
-#endif
-
-#if (flash_EBIU_AMBCTL_HT > 2)
-#define flash_EBIU_AMBCTL0_HT B0HT_3
-#endif
-#if (flash_EBIU_AMBCTL_HT == 2)
-#define flash_EBIU_AMBCTL0_HT B0HT_2
-#endif
-#if (flash_EBIU_AMBCTL_HT == 1)
-#define flash_EBIU_AMBCTL0_HT B0HT_1
-#endif
-#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0)
-#define flash_EBIU_AMBCTL0_HT B0HT_0
-#endif
-#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0)
-#define flash_EBIU_AMBCTL0_HT B0HT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_WAT > 14)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_15
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 14)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_14
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 13)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_13
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 12)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_12
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 11)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_11
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 10)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_10
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 9)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_9
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 8)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_8
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 7)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_7
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 6)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_6
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 5)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_5
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 4)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_4
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 3)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_3
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 2)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_2
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 1)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_RAT > 14)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_15
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 14)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_14
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 13)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_13
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 12)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_12
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 11)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_11
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 10)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_10
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 9)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_9
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 8)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_8
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 7)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_7
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 6)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_6
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 5)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_5
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 4)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_4
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 3)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_3
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 2)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_2
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 1)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_1
-#endif
-
-#define flash_EBIU_AMBCTL0 \
- (flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \
- flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN)
diff --git a/arch/blackfin/mach-bf527/include/mach/mem_map.h b/arch/blackfin/mach-bf527/include/mach/mem_map.h
index ef46dc991cd4..019e0017ad81 100644
--- a/arch/blackfin/mach-bf527/include/mach/mem_map.h
+++ b/arch/blackfin/mach-bf527/include/mach/mem_map.h
@@ -99,4 +99,10 @@
#define L1_SCRATCH_START 0xFFB00000
#define L1_SCRATCH_LENGTH 0x1000
+#define GET_PDA_SAFE(preg) \
+ preg.l = _cpu_pda; \
+ preg.h = _cpu_pda;
+
+#define GET_PDA(preg, dreg) GET_PDA_SAFE(preg)
+
#endif /* _MEM_MAP_527_H_ */
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 07:53:32 +0000