diff options
Diffstat (limited to 'arch/m68k/platform/5272/config.c')
| -rw-r--r-- | arch/m68k/platform/5272/config.c | 176 |
1 files changed, 176 insertions, 0 deletions
diff --git a/arch/m68k/platform/5272/config.c b/arch/m68k/platform/5272/config.c new file mode 100644 index 000000000000..65bb582734e1 --- /dev/null +++ b/arch/m68k/platform/5272/config.c @@ -0,0 +1,176 @@ +/***************************************************************************/ + +/* + * linux/arch/m68knommu/platform/5272/config.c + * + * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com) + * Copyright (C) 2001-2002, SnapGear Inc. (www.snapgear.com) + */ + +/***************************************************************************/ + +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/phy.h> +#include <linux/phy_fixed.h> +#include <asm/machdep.h> +#include <asm/coldfire.h> +#include <asm/mcfsim.h> +#include <asm/mcfuart.h> + +/***************************************************************************/ + +/* + * Some platforms need software versions of the GPIO data registers. + */ +unsigned short ppdata; +unsigned char ledbank = 0xff; + +/***************************************************************************/ + +static struct mcf_platform_uart m5272_uart_platform[] = { + { + .mapbase = MCF_MBAR + MCFUART_BASE1, + .irq = MCF_IRQ_UART1, + }, + { + .mapbase = MCF_MBAR + MCFUART_BASE2, + .irq = MCF_IRQ_UART2, + }, + { }, +}; + +static struct platform_device m5272_uart = { + .name = "mcfuart", + .id = 0, + .dev.platform_data = m5272_uart_platform, +}; + +static struct resource m5272_fec_resources[] = { + { + .start = MCF_MBAR + 0x840, + .end = MCF_MBAR + 0x840 + 0x1cf, + .flags = IORESOURCE_MEM, + }, + { + .start = MCF_IRQ_ERX, + .end = MCF_IRQ_ERX, + .flags = IORESOURCE_IRQ, + }, + { + .start = MCF_IRQ_ETX, + .end = MCF_IRQ_ETX, + .flags = IORESOURCE_IRQ, + }, + { + .start = MCF_IRQ_ENTC, + .end = MCF_IRQ_ENTC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device m5272_fec = { + .name = "fec", + .id = 0, + .num_resources = ARRAY_SIZE(m5272_fec_resources), + .resource = m5272_fec_resources, +}; + +static struct platform_device *m5272_devices[] __initdata = { + &m5272_uart, + &m5272_fec, +}; + +/***************************************************************************/ + +static void __init m5272_uart_init_line(int line, int irq) +{ + u32 v; + + if ((line >= 0) && (line < 2)) { + /* Enable the output lines for the serial ports */ + v = readl(MCF_MBAR + MCFSIM_PBCNT); + v = (v & ~0x000000ff) | 0x00000055; + writel(v, MCF_MBAR + MCFSIM_PBCNT); + + v = readl(MCF_MBAR + MCFSIM_PDCNT); + v = (v & ~0x000003fc) | 0x000002a8; + writel(v, MCF_MBAR + MCFSIM_PDCNT); + } +} + +static void __init m5272_uarts_init(void) +{ + const int nrlines = ARRAY_SIZE(m5272_uart_platform); + int line; + + for (line = 0; (line < nrlines); line++) + m5272_uart_init_line(line, m5272_uart_platform[line].irq); +} + +/***************************************************************************/ + +static void m5272_cpu_reset(void) +{ + local_irq_disable(); + /* Set watchdog to reset, and enabled */ + __raw_writew(0, MCF_MBAR + MCFSIM_WIRR); + __raw_writew(1, MCF_MBAR + MCFSIM_WRRR); + __raw_writew(0, MCF_MBAR + MCFSIM_WCR); + for (;;) + /* wait for watchdog to timeout */; +} + +/***************************************************************************/ + +void __init config_BSP(char *commandp, int size) +{ +#if defined (CONFIG_MOD5272) + volatile unsigned char *pivrp; + + /* Set base of device vectors to be 64 */ + pivrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_PIVR); + *pivrp = 0x40; +#endif + +#if defined(CONFIG_NETtel) || defined(CONFIG_SCALES) + /* Copy command line from FLASH to local buffer... */ + memcpy(commandp, (char *) 0xf0004000, size); + commandp[size-1] = 0; +#elif defined(CONFIG_CANCam) + /* Copy command line from FLASH to local buffer... */ + memcpy(commandp, (char *) 0xf0010000, size); + commandp[size-1] = 0; +#endif + + mach_reset = m5272_cpu_reset; +} + +/***************************************************************************/ + +/* + * Some 5272 based boards have the FEC ethernet diectly connected to + * an ethernet switch. In this case we need to use the fixed phy type, + * and we need to declare it early in boot. + */ +static struct fixed_phy_status nettel_fixed_phy_status __initdata = { + .link = 1, + .speed = 100, + .duplex = 0, +}; + +/***************************************************************************/ + +static int __init init_BSP(void) +{ + m5272_uarts_init(); + fixed_phy_add(PHY_POLL, 0, &nettel_fixed_phy_status); + platform_add_devices(m5272_devices, ARRAY_SIZE(m5272_devices)); + return 0; +} + +arch_initcall(init_BSP); + +/***************************************************************************/ |