diff options
Diffstat (limited to 'arch/mips/alchemy/devboards/db1x00/board_setup.c')
| -rw-r--r-- | arch/mips/alchemy/devboards/db1x00/board_setup.c | 229 |
1 files changed, 0 insertions, 229 deletions
diff --git a/arch/mips/alchemy/devboards/db1x00/board_setup.c b/arch/mips/alchemy/devboards/db1x00/board_setup.c deleted file mode 100644 index 7cd36e631f6c..000000000000 --- a/arch/mips/alchemy/devboards/db1x00/board_setup.c +++ /dev/null @@ -1,229 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * Alchemy Db1x00 board setup. - * - * Copyright 2000, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. <source@mvista.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/pm.h> - -#include <asm/mach-au1x00/au1000.h> -#include <asm/mach-au1x00/au1xxx_eth.h> -#include <asm/mach-db1x00/db1x00.h> -#include <asm/mach-db1x00/bcsr.h> -#include <asm/reboot.h> - -#include <prom.h> - -#ifdef CONFIG_MIPS_BOSPORUS -char irq_tab_alchemy[][5] __initdata = { - [11] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 11 - miniPCI */ - [12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - SN1741 */ - [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */ -}; - -/* - * Micrel/Kendin 5 port switch attached to MAC0, - * MAC0 is associated with PHY address 5 (== WAN port) - * MAC1 is not associated with any PHY, since it's connected directly - * to the switch. - * no interrupts are used - */ -static struct au1000_eth_platform_data eth0_pdata = { - .phy_static_config = 1, - .phy_addr = 5, -}; - -static void bosporus_power_off(void) -{ - while (1) - asm volatile (".set mips3 ; wait ; .set mips0"); -} - -const char *get_system_type(void) -{ - return "Alchemy Bosporus Gateway Reference"; -} -#endif - - -#ifdef CONFIG_MIPS_MIRAGE -static void mirage_power_off(void) -{ - alchemy_gpio_direction_output(210, 1); -} - -const char *get_system_type(void) -{ - return "Alchemy Mirage"; -} -#endif - - -#if defined(CONFIG_MIPS_BOSPORUS) || defined(CONFIG_MIPS_MIRAGE) -static void mips_softreset(void) -{ - asm volatile ("jr\t%0" : : "r"(0xbfc00000)); -} - -#else - -const char *get_system_type(void) -{ - return "Alchemy Db1x00"; -} -#endif - - -void __init board_setup(void) -{ - unsigned long bcsr1, bcsr2; - - bcsr1 = DB1000_BCSR_PHYS_ADDR; - bcsr2 = DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS; - -#ifdef CONFIG_MIPS_DB1000 - printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n"); -#endif -#ifdef CONFIG_MIPS_DB1500 - printk(KERN_INFO "AMD Alchemy Au1500/Db1500 Board\n"); -#endif -#ifdef CONFIG_MIPS_DB1100 - printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n"); -#endif -#ifdef CONFIG_MIPS_BOSPORUS - au1xxx_override_eth_cfg(0, ð0_pdata); - - printk(KERN_INFO "AMD Alchemy Bosporus Board\n"); -#endif -#ifdef CONFIG_MIPS_MIRAGE - printk(KERN_INFO "AMD Alchemy Mirage Board\n"); -#endif -#ifdef CONFIG_MIPS_DB1550 - printk(KERN_INFO "AMD Alchemy Au1550/Db1550 Board\n"); - - bcsr1 = DB1550_BCSR_PHYS_ADDR; - bcsr2 = DB1550_BCSR_PHYS_ADDR + DB1550_BCSR_HEXLED_OFS; -#endif - - /* initialize board register space */ - bcsr_init(bcsr1, bcsr2); - -#if defined(CONFIG_IRDA) && defined(CONFIG_AU1000_FIR) - { - u32 pin_func; - - /* Set IRFIRSEL instead of GPIO15 */ - pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF; - au_writel(pin_func, SYS_PINFUNC); - /* Power off until the driver is in use */ - bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK, - BCSR_RESETS_IRDA_MODE_OFF); - } -#endif - bcsr_write(BCSR_PCMCIA, 0); /* turn off PCMCIA power */ - - /* Enable GPIO[31:0] inputs */ - alchemy_gpio1_input_enable(); - -#ifdef CONFIG_MIPS_MIRAGE - { - u32 pin_func; - - /* GPIO[20] is output */ - alchemy_gpio_direction_output(20, 0); - - /* Set GPIO[210:208] instead of SSI_0 */ - pin_func = au_readl(SYS_PINFUNC) | SYS_PF_S0; - - /* Set GPIO[215:211] for LEDs */ - pin_func |= 5 << 2; - - /* Set GPIO[214:213] for more LEDs */ - pin_func |= 5 << 12; - - /* Set GPIO[207:200] instead of PCMCIA/LCD */ - pin_func |= SYS_PF_LCD | SYS_PF_PC; - au_writel(pin_func, SYS_PINFUNC); - - /* - * Enable speaker amplifier. This should - * be part of the audio driver. - */ - alchemy_gpio_direction_output(209, 1); - - pm_power_off = mirage_power_off; - _machine_halt = mirage_power_off; - _machine_restart = (void(*)(char *))mips_softreset; - } -#endif - -#ifdef CONFIG_MIPS_BOSPORUS - pm_power_off = bosporus_power_off; - _machine_halt = bosporus_power_off; - _machine_restart = (void(*)(char *))mips_softreset; -#endif - au_sync(); -} - -static int __init db1x00_init_irq(void) -{ -#if defined(CONFIG_MIPS_MIRAGE) - irq_set_irq_type(AU1500_GPIO7_INT, IRQF_TRIGGER_RISING); /* TS pendown */ -#elif defined(CONFIG_MIPS_DB1550) - irq_set_irq_type(AU1550_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */ - irq_set_irq_type(AU1550_GPIO1_INT, IRQF_TRIGGER_LOW); /* CD1# */ - irq_set_irq_type(AU1550_GPIO3_INT, IRQF_TRIGGER_LOW); /* CARD0# */ - irq_set_irq_type(AU1550_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */ - irq_set_irq_type(AU1550_GPIO21_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */ - irq_set_irq_type(AU1550_GPIO22_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */ -#elif defined(CONFIG_MIPS_DB1500) - irq_set_irq_type(AU1500_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */ - irq_set_irq_type(AU1500_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */ - irq_set_irq_type(AU1500_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */ - irq_set_irq_type(AU1500_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */ - irq_set_irq_type(AU1500_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */ - irq_set_irq_type(AU1500_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */ -#elif defined(CONFIG_MIPS_DB1100) - irq_set_irq_type(AU1100_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */ - irq_set_irq_type(AU1100_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */ - irq_set_irq_type(AU1100_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */ - irq_set_irq_type(AU1100_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */ - irq_set_irq_type(AU1100_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */ - irq_set_irq_type(AU1100_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */ -#elif defined(CONFIG_MIPS_DB1000) - irq_set_irq_type(AU1000_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */ - irq_set_irq_type(AU1000_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */ - irq_set_irq_type(AU1000_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */ - irq_set_irq_type(AU1000_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */ - irq_set_irq_type(AU1000_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */ - irq_set_irq_type(AU1000_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */ -#endif - return 0; -} -arch_initcall(db1x00_init_irq); |