diff options
Diffstat (limited to 'arch/powerpc/boot/dts/p1022ds.dts')
| -rw-r--r-- | arch/powerpc/boot/dts/p1022ds.dts | 459 |
1 files changed, 38 insertions, 421 deletions
diff --git a/arch/powerpc/boot/dts/p1022ds.dts b/arch/powerpc/boot/dts/p1022ds.dts index b9b8719a6204..ef95717db4bc 100644 --- a/arch/powerpc/boot/dts/p1022ds.dts +++ b/arch/powerpc/boot/dts/p1022ds.dts @@ -8,57 +8,36 @@ * kind, whether express or implied. */ -/dts-v1/; +/include/ "fsl/p1022si-pre.dtsi" / { - model = "fsl,P1022"; + model = "fsl,P1022DS"; compatible = "fsl,P1022DS"; - #address-cells = <2>; - #size-cells = <2>; - interrupt-parent = <&mpic>; - - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - pci1 = &pci1; - pci2 = &pci2; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,P1022@0 { - device_type = "cpu"; - reg = <0x0>; - next-level-cache = <&L2>; - }; - - PowerPC,P1022@1 { - device_type = "cpu"; - reg = <0x1>; - next-level-cache = <&L2>; - }; - }; memory { device_type = "memory"; }; - localbus@fffe05000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus"; - reg = <0 0xffe05000 0 0x1000>; - interrupts = <19 2 0 0>; - + lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0 0x1000>; ranges = <0x0 0x0 0xf 0xe8000000 0x08000000 0x1 0x0 0xf 0xe0000000 0x08000000 - 0x2 0x0 0x0 0xffa00000 0x00040000 + 0x2 0x0 0xf 0xff800000 0x00040000 0x3 0x0 0xf 0xffdf0000 0x00008000>; + /* + * This node is used to access the pixis via "indirect" mode, + * which is done by writing the pixis register index to chip + * select 0 and the value to/from chip select 1. Indirect + * mode is the only way to access the pixis when DIU video + * is enabled. Note that this assumes that the first column + * of the 'ranges' property above is the chip select number. + */ + board-control@0,0 { + compatible = "fsl,p1022ds-indirect-pixis"; + reg = <0x0 0x0 1 /* CS0 */ + 0x1 0x0 1>; /* CS1 */ + }; + nor@0,0 { #address-cells = <1>; #size-cells = <1>; @@ -161,51 +140,10 @@ }; }; - soc@fffe00000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "fsl,p1022-immr", "simple-bus"; + soc: soc@fffe00000 { ranges = <0x0 0xf 0xffe00000 0x100000>; - bus-frequency = <0>; // Filled out by uboot. - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <12>; - }; - - ecm@1000 { - compatible = "fsl,p1022-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <16 2 0 0>; - }; - - memory-controller@2000 { - compatible = "fsl,p1022-memory-controller"; - reg = <0x2000 0x1000>; - interrupts = <16 2 0 0>; - }; - - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2 0 0>; - dfsrr; - }; i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2 0 0>; - dfsrr; - wm8776:codec@1a { compatible = "wlf,wm8776"; reg = <0x1a>; @@ -216,41 +154,14 @@ }; }; - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <42 2 0 0>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <42 2 0 0>; - }; - spi@7000 { - cell-index = <0>; - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,espi"; - reg = <0x7000 0x1000>; - interrupts = <59 0x2 0 0>; - espi,num-ss-bits = <4>; - mode = "cpu"; - - fsl_m25p80@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "fsl,espi-flash"; + compatible = "spansion,s25sl12801"; reg = <0>; - linux,modalias = "fsl_m25p80"; spi-max-frequency = <40000000>; /* input clock */ + partition@0 { label = "u-boot-spi"; reg = <0x00000000 0x00100000>; @@ -274,115 +185,20 @@ }; ssi@15000 { - compatible = "fsl,mpc8610-ssi"; - cell-index = <0>; - reg = <0x15000 0x100>; - interrupts = <75 2 0 0>; fsl,mode = "i2s-slave"; codec-handle = <&wm8776>; - fsl,playback-dma = <&dma00>; - fsl,capture-dma = <&dma01>; - fsl,fifo-depth = <15>; fsl,ssi-asynchronous; }; - dma@c300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,eloplus-dma"; - reg = <0xc300 0x4>; - ranges = <0x0 0xc100 0x200>; - cell-index = <1>; - dma00: dma-channel@0 { - compatible = "fsl,ssi-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupts = <76 2 0 0>; - }; - dma01: dma-channel@80 { - compatible = "fsl,ssi-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupts = <77 2 0 0>; - }; - dma-channel@100 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupts = <78 2 0 0>; - }; - dma-channel@180 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupts = <79 2 0 0>; - }; - }; - - gpio: gpio-controller@f000 { - #gpio-cells = <2>; - compatible = "fsl,mpc8572-gpio"; - reg = <0xf000 0x100>; - interrupts = <47 0x2 0 0>; - gpio-controller; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,p1022-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x40000>; // L2, 256K - interrupts = <16 2 0 0>; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupts = <20 2 0 0>; - }; - dma-channel@80 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupts = <21 2 0 0>; - }; - dma-channel@100 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupts = <22 2 0 0>; - }; - dma-channel@180 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupts = <23 2 0 0>; - }; - }; - usb@22000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl-usb2-dr"; - reg = <0x22000 0x1000>; - interrupts = <28 0x2 0 0>; phy_type = "ulpi"; }; - mdio@24000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,etsec2-mdio"; - reg = <0x24000 0x1000 0xb0030 0x4>; + usb@23000 { + status = "disabled"; + }; + mdio@24000 { phy0: ethernet-phy@0 { interrupts = <3 1 0 0>; reg = <0x1>; @@ -391,189 +207,28 @@ interrupts = <9 1 0 0>; reg = <0x2>; }; + tbi-phy@2 { + device_type = "tbi-phy"; + reg = <0x2>; + }; }; - mdio@25000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,etsec2-mdio"; - reg = <0x25000 0x1000 0xb1030 0x4>; - }; - - enet0: ethernet@B0000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "eTSEC"; - compatible = "fsl,etsec2"; - fsl,num_rx_queues = <0x8>; - fsl,num_tx_queues = <0x8>; - fsl,magic-packet; - fsl,wake-on-filer; - local-mac-address = [ 00 00 00 00 00 00 ]; + ethernet@b0000 { phy-handle = <&phy0>; phy-connection-type = "rgmii-id"; - queue-group@0{ - #address-cells = <1>; - #size-cells = <1>; - reg = <0xB0000 0x1000>; - interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>; - }; - queue-group@1{ - #address-cells = <1>; - #size-cells = <1>; - reg = <0xB4000 0x1000>; - interrupts = <17 2 0 0 18 2 0 0 24 2 0 0>; - }; }; - enet1: ethernet@B1000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "eTSEC"; - compatible = "fsl,etsec2"; - fsl,num_rx_queues = <0x8>; - fsl,num_tx_queues = <0x8>; - local-mac-address = [ 00 00 00 00 00 00 ]; + ethernet@b1000 { phy-handle = <&phy1>; phy-connection-type = "rgmii-id"; - queue-group@0{ - #address-cells = <1>; - #size-cells = <1>; - reg = <0xB1000 0x1000>; - interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>; - }; - queue-group@1{ - #address-cells = <1>; - #size-cells = <1>; - reg = <0xB5000 0x1000>; - interrupts = <51 2 0 0 52 2 0 0 67 2 0 0>; - }; - }; - - sdhci@2e000 { - compatible = "fsl,p1022-esdhc", "fsl,esdhc"; - reg = <0x2e000 0x1000>; - interrupts = <72 0x2 0 0>; - fsl,sdhci-auto-cmd12; - /* Filled in by U-Boot */ - clock-frequency = <0>; - }; - - crypto@30000 { - compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0", - "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1", - "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <45 2 0 0 58 2 0 0>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0x97c>; - fsl,descriptor-types-mask = <0x3a30abf>; - }; - - sata@18000 { - compatible = "fsl,p1022-sata", "fsl,pq-sata-v2"; - reg = <0x18000 0x1000>; - cell-index = <1>; - interrupts = <74 0x2 0 0>; - }; - - sata@19000 { - compatible = "fsl,p1022-sata", "fsl,pq-sata-v2"; - reg = <0x19000 0x1000>; - cell-index = <2>; - interrupts = <41 0x2 0 0>; - }; - - power@e0070{ - compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc"; - reg = <0xe0070 0x20>; - }; - - display@10000 { - compatible = "fsl,diu", "fsl,p1022-diu"; - reg = <0x10000 1000>; - interrupts = <64 2 0 0>; - }; - - timer@41100 { - compatible = "fsl,mpic-global-timer"; - reg = <0x41100 0x100 0x41300 4>; - interrupts = <0 0 3 0 - 1 0 3 0 - 2 0 3 0 - 3 0 3 0>; - }; - - timer@42100 { - compatible = "fsl,mpic-global-timer"; - reg = <0x42100 0x100 0x42300 4>; - interrupts = <4 0 3 0 - 5 0 3 0 - 6 0 3 0 - 7 0 3 0>; - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <4>; - reg = <0x40000 0x40000>; - compatible = "fsl,mpic"; - device_type = "open-pic"; - }; - - msi@41600 { - compatible = "fsl,p1022-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 0 0 - 0xe1 0 0 0 - 0xe2 0 0 0 - 0xe3 0 0 0 - 0xe4 0 0 0 - 0xe5 0 0 0 - 0xe6 0 0 0 - 0xe7 0 0 0>; - }; - - global-utilities@e0000 { //global utilities block - compatible = "fsl,p1022-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; }; }; pci0: pcie@fffe09000 { - compatible = "fsl,p1022-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; reg = <0xf 0xffe09000 0 0x1000>; - bus-range = <0 255>; - ranges = <0x2000000 0x0 0xa0000000 0xc 0x20000000 0x0 0x20000000 + ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; - clock-frequency = <33333333>; - interrupts = <16 2 0 0>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 4 1 - 0000 0 0 2 &mpic 5 1 - 0000 0 0 3 &mpic 6 1 - 0000 0 0 4 &mpic 7 1 - >; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0xe0000000 0x2000000 0x0 0xe0000000 0x0 0x20000000 @@ -585,30 +240,11 @@ }; pci1: pcie@fffe0a000 { - compatible = "fsl,p1022-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; reg = <0xf 0xffe0a000 0 0x1000>; - bus-range = <0 255>; - ranges = <0x2000000 0x0 0xc0000000 0xc 0x40000000 0x0 0x20000000 + ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>; - clock-frequency = <33333333>; - interrupts = <16 2 0 0>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 0 1 - 0000 0 0 2 &mpic 1 1 - 0000 0 0 3 &mpic 2 1 - 0000 0 0 4 &mpic 3 1 - >; pcie@0 { reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0xe0000000 0x2000000 0x0 0xe0000000 0x0 0x20000000 @@ -619,32 +255,11 @@ }; }; - pci2: pcie@fffe0b000 { - compatible = "fsl,p1022-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; reg = <0xf 0xffe0b000 0 0x1000>; - bus-range = <0 255>; - ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000 + ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; - clock-frequency = <33333333>; - interrupts = <16 2 0 0>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 8 1 - 0000 0 0 2 &mpic 9 1 - 0000 0 0 3 &mpic 10 1 - 0000 0 0 4 &mpic 11 1 - >; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0xe0000000 0x2000000 0x0 0xe0000000 0x0 0x20000000 @@ -655,3 +270,5 @@ }; }; }; + +/include/ "fsl/p1022si-post.dtsi" |