diff options
Diffstat (limited to 'arch/powerpc/boot/dts')
34 files changed, 4011 insertions, 1840 deletions
diff --git a/arch/powerpc/boot/dts/bamboo.dts b/arch/powerpc/boot/dts/bamboo.dts new file mode 100644 index 000000000000..a88ae3d218a5 --- /dev/null +++ b/arch/powerpc/boot/dts/bamboo.dts @@ -0,0 +1,244 @@ +/* + * Device Tree Source for AMCC Bamboo + * + * Copyright (c) 2006, 2007 IBM Corp. + * Josh Boyer <jwboyer@linux.vnet.ibm.com> + * + * FIXME: Draft only! + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,bamboo"; + compatible = "amcc,bamboo"; + dcr-parent = <&/cpus/PowerPC,440EP@0>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,440EP@0 { + device_type = "cpu"; + reg = <0>; + clock-frequency = <0>; /* Filled in by zImage */ + timebase-frequency = <0>; /* Filled in by zImage */ + i-cache-line-size = <20>; + d-cache-line-size = <20>; + i-cache-size = <8000>; + d-cache-size = <8000>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0 0>; /* Filled in by zImage */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-440ep","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0c0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-440ep","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0d0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <1e 4 1f 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-440ep"; + dcr-reg = <00e 002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-440ep"; + dcr-reg = <00c 002>; + }; + + plb { + compatible = "ibm,plb-440ep", "ibm,plb-440gp", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by zImage */ + + SDRAM0: sdram { + compatible = "ibm,sdram-440ep", "ibm,sdram-405gp"; + dcr-reg = <010 2>; + }; + + DMA0: dma { + compatible = "ibm,dma-440ep", "ibm,dma-440gp"; + dcr-reg = <100 027>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal"; + dcr-reg = <180 62>; + num-tx-chans = <4>; + num-rx-chans = <2>; + interrupt-parent = <&MAL0>; + interrupts = <0 1 2 3 4>; + #interrupt-cells = <1>; + interrupt-map = </*TXEOB*/ 0 &UIC0 a 4 + /*RXEOB*/ 1 &UIC0 b 4 + /*SERR*/ 2 &UIC1 0 4 + /*TXDE*/ 3 &UIC1 1 4 + /*RXDE*/ 4 &UIC1 3 4>; + }; + + POB0: opb { + compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + /* Bamboo is oddball in the 44x world and doesn't use the ERPN + * bits. + */ + ranges = <00000000 0 00000000 80000000 + 80000000 0 80000000 80000000>; + interrupt-parent = <&UIC1>; + interrupts = <7 4>; + clock-frequency = <0>; /* Filled in by zImage */ + + EBC0: ebc { + compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc"; + dcr-reg = <012 2>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by zImage */ + ranges; + interrupts = <5 1>; + interrupt-parent = <&UIC1>; + }; + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600300 8>; + virtual-reg = <ef600300>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <1c200>; + interrupt-parent = <&UIC0>; + interrupts = <0 4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600400 8>; + virtual-reg = <ef600400>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <1 4>; + }; + + UART2: serial@ef600500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600500 8>; + virtual-reg = <ef600500>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <3 4>; + }; + + UART3: serial@ef600600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600600 8>; + virtual-reg = <ef600600>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <4 4>; + }; + + IIC0: i2c@ef600700 { + device_type = "i2c"; + compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic"; + reg = <ef600700 14>; + interrupt-parent = <&UIC0>; + interrupts = <2 4>; + }; + + IIC1: i2c@ef600800 { + device_type = "i2c"; + compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic"; + reg = <ef600800 14>; + interrupt-parent = <&UIC0>; + interrupts = <7 4>; + }; + + ZMII0: emac-zmii@ef600d00 { + device_type = "zmii-interface"; + compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii"; + reg = <ef600d00 c>; + }; + + EMAC0: ethernet@ef600e00 { + device_type = "network"; + compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; + interrupt-parent = <&UIC1>; + interrupts = <1c 4 1d 4>; + reg = <ef600e00 70>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <0 1>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rmii"; + phy-map = <00000001>; + zmii-device = <&ZMII0>; + zmii-channel = <0>; + }; + + EMAC1: ethernet@ef600f00 { + device_type = "network"; + compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; + interrupt-parent = <&UIC1>; + interrupts = <1e 4 1f 4>; + reg = <ef600f00 70>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <2 3>; + mal-rx-channel = <1>; + cell-index = <1>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rmii"; + phy-map = <00000001>; + zmii-device = <&ZMII0>; + zmii-channel = <1>; + }; + }; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@ef600300"; + bootargs = "console=ttyS0,115200"; + }; +}; diff --git a/arch/powerpc/boot/dts/ebony.dts b/arch/powerpc/boot/dts/ebony.dts index c5f99613fc7b..bc259972aaa0 100644 --- a/arch/powerpc/boot/dts/ebony.dts +++ b/arch/powerpc/boot/dts/ebony.dts @@ -9,10 +9,6 @@ * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without * any warranty of any kind, whether express or implied. - * - * To build: - * dtc -I dts -O asm -o ebony.S -b 0 ebony.dts - * dtc -I dts -O dtb -o ebony.dtb -b 0 ebony.dts */ / { @@ -142,13 +138,16 @@ interrupt-parent = <&UIC1>; small-flash@0,80000 { - device_type = "rom"; - compatible = "direct-mapped"; - probe-type = "JEDEC"; + compatible = "jedec-flash"; bank-width = <1>; - partitions = <0 80000>; - partition-names = "OpenBIOS"; reg = <0 80000 80000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "OpenBIOS"; + reg = <0 80000>; + read-only; + }; }; ds1743@1,0 { @@ -158,14 +157,19 @@ }; large-flash@2,0 { - device_type = "rom"; - compatible = "direct-mapped"; - probe-type = "JEDEC"; + compatible = "jedec-flash"; bank-width = <1>; - partitions = <0 380000 - 380000 80000>; - partition-names = "fs", "firmware"; reg = <2 0 400000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "fs"; + reg = <0 380000>; + }; + partition@380000 { + label = "firmware"; + reg = <380000 80000>; + }; }; ir@3,0 { @@ -175,6 +179,7 @@ fpga@7,0 { compatible = "Ebony-FPGA"; reg = <7 0 10>; + virtual-reg = <e8300000>; }; }; diff --git a/arch/powerpc/boot/dts/ep88xc.dts b/arch/powerpc/boot/dts/ep88xc.dts new file mode 100644 index 000000000000..02705f299790 --- /dev/null +++ b/arch/powerpc/boot/dts/ep88xc.dts @@ -0,0 +1,214 @@ +/* + * EP88xC Device Tree Source + * + * Copyright 2006 MontaVista Software, Inc. + * Copyright 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/ { + model = "EP88xC"; + compatible = "fsl,ep88xc"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,885@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <d#16>; + i-cache-line-size = <d#16>; + d-cache-size = <d#8192>; + i-cache-size = <d#8192>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + interrupts = <f 2>; // decrementer interrupt + interrupt-parent = <&PIC>; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0>; + }; + + localbus@fa200100 { + compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <fa200100 40>; + + ranges = < + 0 0 fc000000 04000000 + 3 0 fa000000 01000000 + >; + + flash@0,2000000 { + compatible = "cfi-flash"; + reg = <0 2000000 2000000>; + bank-width = <4>; + device-width = <2>; + }; + + board-control@3,400000 { + reg = <3 400000 10>; + compatible = "fsl,ep88xc-bcsr"; + }; + }; + + soc@fa200000 { + compatible = "fsl,mpc885", "fsl,pq1-soc"; + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0 fa200000 00004000>; + bus-frequency = <0>; + + // Temporary -- will go away once kernel uses ranges for get_immrbase(). + reg = <fa200000 4000>; + + mdio@e00 { + compatible = "fsl,mpc885-fec-mdio", "fsl,pq1-fec-mdio"; + reg = <e00 188>; + #address-cells = <1>; + #size-cells = <0>; + + PHY0: ethernet-phy@0 { + reg = <0>; + device_type = "ethernet-phy"; + }; + + PHY1: ethernet-phy@1 { + reg = <1>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@e00 { + device_type = "network"; + compatible = "fsl,mpc885-fec-enet", + "fsl,pq1-fec-enet"; + reg = <e00 188>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <3 1>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY0>; + linux,network-index = <0>; + }; + + ethernet@1e00 { + device_type = "network"; + compatible = "fsl,mpc885-fec-enet", + "fsl,pq1-fec-enet"; + reg = <1e00 188>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <7 1>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY1>; + linux,network-index = <1>; + }; + + PIC: interrupt-controller@0 { + interrupt-controller; + #interrupt-cells = <2>; + reg = <0 24>; + compatible = "fsl,mpc885-pic", "fsl,pq1-pic"; + }; + + pcmcia@80 { + #address-cells = <3>; + #interrupt-cells = <1>; + #size-cells = <2>; + compatible = "fsl,pq-pcmcia"; + device_type = "pcmcia"; + reg = <80 80>; + interrupt-parent = <&PIC>; + interrupts = <d 1>; + }; + + cpm@9c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc885-cpm", "fsl,cpm1"; + command-proc = <9c0>; + interrupts = <0>; // cpm error interrupt + interrupt-parent = <&CPM_PIC>; + reg = <9c0 40>; + ranges; + + muram@2000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 2000 2000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0 1c00>; + }; + }; + + brg@9f0 { + compatible = "fsl,mpc885-brg", + "fsl,cpm1-brg", + "fsl,cpm-brg"; + reg = <9f0 10>; + }; + + CPM_PIC: interrupt-controller@930 { + interrupt-controller; + #interrupt-cells = <1>; + interrupts = <5 2 0 2>; + interrupt-parent = <&PIC>; + reg = <930 20>; + compatible = "fsl,mpc885-cpm-pic", + "fsl,cpm1-pic"; + }; + + // MON-1 + serial@a80 { + device_type = "serial"; + compatible = "fsl,mpc885-smc-uart", + "fsl,cpm1-smc-uart"; + reg = <a80 10 3e80 40>; + interrupts = <4>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <0090>; + linux,planetcore-label = "SMC1"; + }; + + // SER-1 + serial@a20 { + device_type = "serial"; + compatible = "fsl,mpc885-scc-uart", + "fsl,cpm1-scc-uart"; + reg = <a20 20 3d00 80>; + interrupts = <1d>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-brg = <2>; + fsl,cpm-command = <0040>; + linux,planetcore-label = "SCC2"; + }; + + usb@a00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc885-usb", + "fsl,cpm1-usb"; + reg = <a00 18 1c00 80>; + interrupt-parent = <&CPM_PIC>; + interrupts = <1e>; + fsl,cpm-command = <0000>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/holly.dts b/arch/powerpc/boot/dts/holly.dts index 80a4fab8ee37..b5d87895fe06 100644 --- a/arch/powerpc/boot/dts/holly.dts +++ b/arch/powerpc/boot/dts/holly.dts @@ -8,10 +8,6 @@ * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without * any warranty of any kind, whether express or implied. - * - * To build: - * dtc -I dts -O asm -o holly.S -b 0 holly.dts - * dtc -I dts -O dtb -o holly.dtb -b 0 holly.dts */ / { @@ -35,7 +31,6 @@ timebase-frequency = <2faf080>; clock-frequency = <23c34600>; bus-frequency = <bebc200>; - 32-bit; }; }; diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts new file mode 100644 index 000000000000..c824e8f06454 --- /dev/null +++ b/arch/powerpc/boot/dts/kilauea.dts @@ -0,0 +1,252 @@ +/* + * Device Tree Source for AMCC Kilauea (405EX) + * + * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "amcc,kilauea"; + compatible = "amcc,kilauea"; + dcr-parent = <&/cpus/PowerPC,405EX@0>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,405EX@0 { + device_type = "cpu"; + reg = <0>; + clock-frequency = <0>; /* Filled in by U-Boot */ + timebase-frequency = <0>; /* Filled in by U-Boot */ + i-cache-line-size = <20>; + d-cache-line-size = <20>; + i-cache-size = <4000>; /* 16 kB */ + d-cache-size = <4000>; /* 16 kB */ + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller { + compatible = "ibm,uic-405ex", "ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0c0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-405ex","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0d0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <1e 4 1f 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-405ex","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0e0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <1c 4 1d 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + plb { + compatible = "ibm,plb-405ex", "ibm,plb4"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by U-Boot */ + + SDRAM0: memory-controller { + compatible = "ibm,sdram-405ex"; + dcr-reg = <010 2>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-405ex", "ibm,mcmal2"; + dcr-reg = <180 62>; + num-tx-chans = <2>; + num-rx-chans = <2>; + interrupt-parent = <&MAL0>; + interrupts = <0 1 2 3 4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*TXEOB*/ 0 &UIC0 a 4 + /*RXEOB*/ 1 &UIC0 b 4 + /*SERR*/ 2 &UIC1 0 4 + /*TXDE*/ 3 &UIC1 1 4 + /*RXDE*/ 4 &UIC1 2 4>; + interrupt-map-mask = <ffffffff>; + }; + + POB0: opb { + compatible = "ibm,opb-405ex", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <80000000 80000000 10000000 + ef600000 ef600000 a00000 + f0000000 f0000000 10000000>; + dcr-reg = <0a0 5>; + clock-frequency = <0>; /* Filled in by U-Boot */ + + EBC0: ebc { + compatible = "ibm,ebc-405ex", "ibm,ebc"; + dcr-reg = <012 2>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by U-Boot */ + /* ranges property is supplied by U-Boot */ + interrupts = <5 1>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl512n", "cfi-flash"; + bank-width = <2>; + reg = <0 000000 4000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0 200000>; + }; + partition@200000 { + label = "root"; + reg = <200000 200000>; + }; + partition@400000 { + label = "user"; + reg = <400000 3b60000>; + }; + partition@3f60000 { + label = "env"; + reg = <3f60000 40000>; + }; + partition@3fa0000 { + label = "u-boot"; + reg = <3fa0000 60000>; + }; + }; + }; + + UART0: serial@ef600200 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600200 8>; + virtual-reg = <ef600200>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <1a 4>; + }; + + UART1: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600300 8>; + virtual-reg = <ef600300>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <1 4>; + }; + + IIC0: i2c@ef600400 { + device_type = "i2c"; + compatible = "ibm,iic-405ex", "ibm,iic"; + reg = <ef600400 14>; + interrupt-parent = <&UIC0>; + interrupts = <2 4>; + }; + + IIC1: i2c@ef600500 { + device_type = "i2c"; + compatible = "ibm,iic-405ex", "ibm,iic"; + reg = <ef600500 14>; + interrupt-parent = <&UIC0>; + interrupts = <7 4>; + }; + + + RGMII0: emac-rgmii@ef600b00 { + device_type = "rgmii-interface"; + compatible = "ibm,rgmii-405ex", "ibm,rgmii"; + reg = <ef600b00 104>; + }; + + EMAC0: ethernet@ef600900 { + linux,network-index = <0>; + device_type = "network"; + compatible = "ibm,emac-405ex", "ibm,emac4"; + interrupt-parent = <&EMAC0>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0 &UIC0 18 4 + /*Wake*/ 1 &UIC1 1d 4>; + reg = <ef600900 70>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rgmii"; + phy-map = <00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + }; + + EMAC1: ethernet@ef600a00 { + linux,network-index = <1>; + device_type = "network"; + compatible = "ibm,emac-405ex", "ibm,emac4"; + interrupt-parent = <&EMAC1>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0 &UIC0 19 4 + /*Wake*/ 1 &UIC1 1f 4>; + reg = <ef600a00 70>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <1>; + mal-rx-channel = <1>; + cell-index = <1>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rgmii"; + phy-map = <00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <1>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/kuroboxHD.dts b/arch/powerpc/boot/dts/kuroboxHD.dts index 122537419d9f..ec71ab819fee 100644 --- a/arch/powerpc/boot/dts/kuroboxHD.dts +++ b/arch/powerpc/boot/dts/kuroboxHD.dts @@ -15,9 +15,6 @@ XXXX add flash parts, rtc, ?? -build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts" - - */ / { @@ -50,7 +47,6 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts" soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */ #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "soc"; compatible = "mpc10x"; store-gathering = <0>; /* 0 == off, !0 == on */ @@ -72,7 +68,7 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts" rtc@32 { device_type = "rtc"; - compatible = "ricoh,rs5c372b"; + compatible = "ricoh,rs5c372a"; reg = <32>; }; }; @@ -83,7 +79,7 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts" reg = <80004500 8>; clock-frequency = <5d08d88>; current-speed = <2580>; - interrupts = <9 2>; + interrupts = <9 0>; interrupt-parent = <&mpic>; }; @@ -104,7 +100,6 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts" compatible = "chrp,open-pic"; interrupt-controller; reg = <80040000 40000>; - built-in; }; pci@fec00000 { diff --git a/arch/powerpc/boot/dts/kuroboxHG.dts b/arch/powerpc/boot/dts/kuroboxHG.dts index 579aa8b967d9..32ecd2319928 100644 --- a/arch/powerpc/boot/dts/kuroboxHG.dts +++ b/arch/powerpc/boot/dts/kuroboxHG.dts @@ -15,9 +15,6 @@ XXXX add flash parts, rtc, ?? -build with: "dtc -f -I dts -O dtb -o kuroboxHG.dtb -V 16 kuroboxHG.dts" - - */ / { @@ -50,7 +47,6 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHG.dtb -V 16 kuroboxHG.dts" soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */ #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "soc"; compatible = "mpc10x"; store-gathering = <0>; /* 0 == off, !0 == on */ @@ -72,7 +68,7 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHG.dtb -V 16 kuroboxHG.dts" rtc@32 { device_type = "rtc"; - compatible = "ricoh,rs5c372b"; + compatible = "ricoh,rs5c372a"; reg = <32>; }; }; @@ -83,7 +79,7 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHG.dtb -V 16 kuroboxHG.dts" reg = <80004500 8>; clock-frequency = <7c044a8>; current-speed = <2580>; - interrupts = <9 2>; + interrupts = <9 0>; interrupt-parent = <&mpic>; }; @@ -104,7 +100,6 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHG.dtb -V 16 kuroboxHG.dts" compatible = "chrp,open-pic"; interrupt-controller; reg = <80040000 40000>; - built-in; }; pci@fec00000 { diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts index d29308fe4c24..bc45f5fbb060 100644 --- a/arch/powerpc/boot/dts/lite5200.dts +++ b/arch/powerpc/boot/dts/lite5200.dts @@ -19,7 +19,7 @@ / { model = "fsl,lite5200"; // revision = "1.0"; - compatible = "fsl,lite5200\0generic-mpc5200"; + compatible = "fsl,lite5200","generic-mpc5200"; #address-cells = <1>; #size-cells = <1>; @@ -37,7 +37,6 @@ timebase-frequency = <0>; // from bootloader bus-frequency = <0>; // from bootloader clock-frequency = <0>; // from bootloader - 32-bit; }; }; @@ -50,10 +49,9 @@ model = "fsl,mpc5200"; compatible = "mpc5200"; revision = ""; // from bootloader - #interrupt-cells = <3>; device_type = "soc"; - ranges = <0 f0000000 f0010000>; - reg = <f0000000 00010000>; + ranges = <0 f0000000 0000c000>; + reg = <f0000000 00000100>; bus-frequency = <0>; // from bootloader system-frequency = <0>; // from bootloader @@ -69,7 +67,6 @@ device_type = "interrupt-controller"; compatible = "mpc5200-pic"; reg = <500 80>; - built-in; }; gpt@600 { // General Purpose Timer @@ -185,27 +182,6 @@ interrupt-parent = <&mpc5200_pic>; }; - pci@0d00 { - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - compatible = "mpc5200-pci"; - reg = <d00 100>; - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 - c000 0 0 2 &mpc5200_pic 0 0 3 - c000 0 0 3 &mpc5200_pic 0 0 3 - c000 0 0 4 &mpc5200_pic 0 0 3>; - clock-frequency = <0>; // From boot loader - interrupts = <2 8 0 2 9 0 2 a 0>; - interrupt-parent = <&mpc5200_pic>; - bus-range = <0 0>; - ranges = <42000000 0 80000000 80000000 0 20000000 - 02000000 0 a0000000 a0000000 0 10000000 - 01000000 0 00000000 b0000000 0 01000000>; - }; - spi@f00 { device_type = "spi"; compatible = "mpc5200-spi"; @@ -216,7 +192,7 @@ usb@1000 { device_type = "usb-ohci-be"; - compatible = "mpc5200-ohci\0ohci-be"; + compatible = "mpc5200-ohci","ohci-be"; reg = <1000 ff>; interrupts = <2 6 0>; interrupt-parent = <&mpc5200_pic>; @@ -317,7 +293,7 @@ i2c@3d00 { device_type = "i2c"; - compatible = "mpc5200-i2c\0fsl-i2c"; + compatible = "mpc5200-i2c","fsl-i2c"; cell-index = <0>; reg = <3d00 40>; interrupts = <2 f 0>; @@ -327,7 +303,7 @@ i2c@3d40 { device_type = "i2c"; - compatible = "mpc5200-i2c\0fsl-i2c"; + compatible = "mpc5200-i2c","fsl-i2c"; cell-index = <1>; reg = <3d40 40>; interrupts = <2 10 0>; @@ -336,8 +312,29 @@ }; sram@8000 { device_type = "sram"; - compatible = "mpc5200-sram\0sram"; + compatible = "mpc5200-sram","sram"; reg = <8000 4000>; }; }; + + pci@f0000d00 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + compatible = "mpc5200-pci"; + reg = <f0000d00 100>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 + c000 0 0 2 &mpc5200_pic 0 0 3 + c000 0 0 3 &mpc5200_pic 0 0 3 + c000 0 0 4 &mpc5200_pic 0 0 3>; + clock-frequency = <0>; // From boot loader + interrupts = <2 8 0 2 9 0 2 a 0>; + interrupt-parent = <&mpc5200_pic>; + bus-range = <0 0>; + ranges = <42000000 0 80000000 80000000 0 20000000 + 02000000 0 a0000000 a0000000 0 10000000 + 01000000 0 00000000 b0000000 0 01000000>; + }; }; diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts index f242531f0451..a6bb1d0558ef 100644 --- a/arch/powerpc/boot/dts/lite5200b.dts +++ b/arch/powerpc/boot/dts/lite5200b.dts @@ -19,7 +19,7 @@ / { model = "fsl,lite5200b"; // revision = "1.0"; - compatible = "fsl,lite5200b\0generic-mpc5200"; + compatible = "fsl,lite5200b","generic-mpc5200"; #address-cells = <1>; #size-cells = <1>; @@ -37,7 +37,6 @@ timebase-frequency = <0>; // from bootloader bus-frequency = <0>; // from bootloader clock-frequency = <0>; // from bootloader - 32-bit; }; }; @@ -50,15 +49,14 @@ model = "fsl,mpc5200b"; compatible = "mpc5200"; revision = ""; // from bootloader - #interrupt-cells = <3>; device_type = "soc"; - ranges = <0 f0000000 f0010000>; - reg = <f0000000 00010000>; + ranges = <0 f0000000 0000c000>; + reg = <f0000000 00000100>; bus-frequency = <0>; // from bootloader system-frequency = <0>; // from bootloader cdm@200 { - compatible = "mpc5200b-cdm\0mpc5200-cdm"; + compatible = "mpc5200b-cdm","mpc5200-cdm"; reg = <200 38>; }; @@ -67,13 +65,12 @@ interrupt-controller; #interrupt-cells = <3>; device_type = "interrupt-controller"; - compatible = "mpc5200b-pic\0mpc5200-pic"; + compatible = "mpc5200b-pic","mpc5200-pic"; reg = <500 80>; - built-in; }; gpt@600 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc5200-gpt"; + compatible = "mpc5200b-gpt","mpc5200-gpt"; device_type = "gpt"; cell-index = <0>; reg = <600 10>; @@ -83,7 +80,7 @@ }; gpt@610 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc5200-gpt"; + compatible = "mpc5200b-gpt","mpc5200-gpt"; device_type = "gpt"; cell-index = <1>; reg = <610 10>; @@ -92,7 +89,7 @@ }; gpt@620 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc5200-gpt"; + compatible = "mpc5200b-gpt","mpc5200-gpt"; device_type = "gpt"; cell-index = <2>; reg = <620 10>; @@ -101,7 +98,7 @@ }; gpt@630 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc5200-gpt"; + compatible = "mpc5200b-gpt","mpc5200-gpt"; device_type = "gpt"; cell-index = <3>; reg = <630 10>; @@ -110,7 +107,7 @@ }; gpt@640 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc5200-gpt"; + compatible = "mpc5200b-gpt","mpc5200-gpt"; device_type = "gpt"; cell-index = <4>; reg = <640 10>; @@ -119,7 +116,7 @@ }; gpt@650 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc5200-gpt"; + compatible = "mpc5200b-gpt","mpc5200-gpt"; device_type = "gpt"; cell-index = <5>; reg = <650 10>; @@ -128,7 +125,7 @@ }; gpt@660 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc5200-gpt"; + compatible = "mpc5200b-gpt","mpc5200-gpt"; device_type = "gpt"; cell-index = <6>; reg = <660 10>; @@ -137,7 +134,7 @@ }; gpt@670 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc5200-gpt"; + compatible = "mpc5200b-gpt","mpc5200-gpt"; device_type = "gpt"; cell-index = <7>; reg = <670 10>; @@ -146,7 +143,7 @@ }; rtc@800 { // Real time clock - compatible = "mpc5200b-rtc\0mpc5200-rtc"; + compatible = "mpc5200b-rtc","mpc5200-rtc"; device_type = "rtc"; reg = <800 100>; interrupts = <1 5 0 1 6 0>; @@ -155,7 +152,7 @@ mscan@900 { device_type = "mscan"; - compatible = "mpc5200b-mscan\0mpc5200-mscan"; + compatible = "mpc5200b-mscan","mpc5200-mscan"; cell-index = <0>; interrupts = <2 11 0>; interrupt-parent = <&mpc5200_pic>; @@ -164,7 +161,7 @@ mscan@980 { device_type = "mscan"; - compatible = "mpc5200b-mscan\0mpc5200-mscan"; + compatible = "mpc5200b-mscan","mpc5200-mscan"; cell-index = <1>; interrupts = <2 12 0>; interrupt-parent = <&mpc5200_pic>; @@ -172,48 +169,22 @@ }; gpio@b00 { - compatible = "mpc5200b-gpio\0mpc5200-gpio"; + compatible = "mpc5200b-gpio","mpc5200-gpio"; reg = <b00 40>; interrupts = <1 7 0>; interrupt-parent = <&mpc5200_pic>; }; gpio-wkup@c00 { - compatible = "mpc5200b-gpio-wkup\0mpc5200-gpio-wkup"; + compatible = "mpc5200b-gpio-wkup","mpc5200-gpio-wkup"; reg = <c00 40>; interrupts = <1 8 0 0 3 0>; interrupt-parent = <&mpc5200_pic>; }; - pci@0d00 { - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - compatible = "mpc5200b-pci\0mpc5200-pci"; - reg = <d00 100>; - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot - c000 0 0 2 &mpc5200_pic 1 1 3 - c000 0 0 3 &mpc5200_pic 1 2 3 - c000 0 0 4 &mpc5200_pic 1 3 3 - - c800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot - c800 0 0 2 &mpc5200_pic 1 2 3 - c800 0 0 3 &mpc5200_pic 1 3 3 - c800 0 0 4 &mpc5200_pic 0 0 3>; - clock-frequency = <0>; // From boot loader - interrupts = <2 8 0 2 9 0 2 a 0>; - interrupt-parent = <&mpc5200_pic>; - bus-range = <0 0>; - ranges = <42000000 0 80000000 80000000 0 20000000 - 02000000 0 a0000000 a0000000 0 10000000 - 01000000 0 00000000 b0000000 0 01000000>; - }; - spi@f00 { device_type = "spi"; - compatible = "mpc5200b-spi\0mpc5200-spi"; + compatible = "mpc5200b-spi","mpc5200-spi"; reg = <f00 20>; interrupts = <2 d 0 2 e 0>; interrupt-parent = <&mpc5200_pic>; @@ -221,7 +192,7 @@ usb@1000 { device_type = "usb-ohci-be"; - compatible = "mpc5200b-ohci\0mpc5200-ohci\0ohci-be"; + compatible = "mpc5200b-ohci","mpc5200-ohci","ohci-be"; reg = <1000 ff>; interrupts = <2 6 0>; interrupt-parent = <&mpc5200_pic>; @@ -229,7 +200,7 @@ bestcomm@1200 { device_type = "dma-controller"; - compatible = "mpc5200b-bestcomm\0mpc5200-bestcomm"; + compatible = "mpc5200b-bestcomm","mpc5200-bestcomm"; reg = <1200 80>; interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 3 4 0 3 5 0 3 6 0 3 7 0 @@ -239,13 +210,13 @@ }; xlb@1f00 { - compatible = "mpc5200b-xlb\0mpc5200-xlb"; + compatible = "mpc5200b-xlb","mpc5200-xlb"; reg = <1f00 100>; }; serial@2000 { // PSC1 device_type = "serial"; - compatible = "mpc5200b-psc-uart\0mpc5200-psc-uart"; + compatible = "mpc5200b-psc-uart","mpc5200-psc-uart"; port-number = <0>; // Logical port assignment cell-index = <0>; reg = <2000 100>; @@ -256,7 +227,7 @@ // PSC2 in ac97 mode example //ac97@2200 { // PSC2 // device_type = "sound"; - // compatible = "mpc5200b-psc-ac97\0mpc5200-psc-ac97"; + // compatible = "mpc5200b-psc-ac97","mpc5200-psc-ac97"; // cell-index = <1>; // reg = <2200 100>; // interrupts = <2 2 0>; @@ -276,7 +247,7 @@ // PSC4 in uart mode example //serial@2600 { // PSC4 // device_type = "serial"; - // compatible = "mpc5200b-psc-uart\0mpc5200-psc-uart"; + // compatible = "mpc5200b-psc-uart","mpc5200-psc-uart"; // cell-index = <3>; // reg = <2600 100>; // interrupts = <2 b 0>; @@ -286,7 +257,7 @@ // PSC5 in uart mode example //serial@2800 { // PSC5 // device_type = "serial"; - // compatible = "mpc5200b-psc-uart\0mpc5200-psc-uart"; + // compatible = "mpc5200b-psc-uart","mpc5200-psc-uart"; // cell-index = <4>; // reg = <2800 100>; // interrupts = <2 c 0>; @@ -296,7 +267,7 @@ // PSC6 in spi mode example //spi@2c00 { // PSC6 // device_type = "spi"; - // compatible = "mpc5200b-psc-spi\0mpc5200-psc-spi"; + // compatible = "mpc5200b-psc-spi","mpc5200-psc-spi"; // cell-index = <5>; // reg = <2c00 100>; // interrupts = <2 4 0>; @@ -305,7 +276,7 @@ ethernet@3000 { device_type = "network"; - compatible = "mpc5200b-fec\0mpc5200-fec"; + compatible = "mpc5200b-fec","mpc5200-fec"; reg = <3000 800>; mac-address = [ 02 03 04 05 06 07 ]; // Bad! interrupts = <2 5 0>; @@ -314,7 +285,7 @@ ata@3a00 { device_type = "ata"; - compatible = "mpc5200b-ata\0mpc5200-ata"; + compatible = "mpc5200b-ata","mpc5200-ata"; reg = <3a00 100>; interrupts = <2 7 0>; interrupt-parent = <&mpc5200_pic>; @@ -322,7 +293,7 @@ i2c@3d00 { device_type = "i2c"; - compatible = "mpc5200b-i2c\0mpc5200-i2c\0fsl-i2c"; + compatible = "mpc5200b-i2c","mpc5200-i2c","fsl-i2c"; cell-index = <0>; reg = <3d00 40>; interrupts = <2 f 0>; @@ -332,7 +303,7 @@ i2c@3d40 { device_type = "i2c"; - compatible = "mpc5200b-i2c\0mpc5200-i2c\0fsl-i2c"; + compatible = "mpc5200b-i2c","mpc5200-i2c","fsl-i2c"; cell-index = <1>; reg = <3d40 40>; interrupts = <2 10 0>; @@ -341,8 +312,34 @@ }; sram@8000 { device_type = "sram"; - compatible = "mpc5200b-sram\0mpc5200-sram\0sram"; + compatible = "mpc5200b-sram","mpc5200-sram","sram"; reg = <8000 4000>; }; }; + + pci@f0000d00 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + compatible = "mpc5200b-pci","mpc5200-pci"; + reg = <f0000d00 100>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot + c000 0 0 2 &mpc5200_pic 1 1 3 + c000 0 0 3 &mpc5200_pic 1 2 3 + c000 0 0 4 &mpc5200_pic 1 3 3 + + c800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot + c800 0 0 2 &mpc5200_pic 1 2 3 + c800 0 0 3 &mpc5200_pic 1 3 3 + c800 0 0 4 &mpc5200_pic 0 0 3>; + clock-frequency = <0>; // From boot loader + interrupts = <2 8 0 2 9 0 2 a 0>; + interrupt-parent = <&mpc5200_pic>; + bus-range = <0 0>; + ranges = <42000000 0 80000000 80000000 0 20000000 + 02000000 0 a0000000 a0000000 0 10000000 + 01000000 0 00000000 b0000000 0 01000000>; + }; }; diff --git a/arch/powerpc/boot/dts/mpc7448hpc2.dts b/arch/powerpc/boot/dts/mpc7448hpc2.dts index b9158eb2797e..8fb542387436 100644 --- a/arch/powerpc/boot/dts/mpc7448hpc2.dts +++ b/arch/powerpc/boot/dts/mpc7448hpc2.dts @@ -31,7 +31,6 @@ timebase-frequency = <0>; // 33 MHz, from uboot clock-frequency = <0>; // From U-Boot bus-frequency = <0>; // From U-Boot - 32-bit; }; }; @@ -44,7 +43,6 @@ tsi108@c0000000 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "tsi-bridge"; ranges = <00000000 c0000000 00010000>; reg = <c0000000 00010000>; @@ -80,6 +78,7 @@ }; ethernet@6200 { + linux,network-index = <0>; #size-cells = <0>; device_type = "network"; compatible = "tsi108-ethernet"; @@ -92,6 +91,7 @@ }; ethernet@6600 { + linux,network-index = <1>; #address-cells = <1>; #size-cells = <0>; device_type = "network"; @@ -128,7 +128,6 @@ #address-cells = <0>; #interrupt-cells = <2>; reg = <7400 400>; - built-in; compatible = "chrp,open-pic"; device_type = "open-pic"; big-endian; @@ -180,12 +179,14 @@ device_type = "pic-router"; #address-cells = <0>; #interrupt-cells = <2>; - built-in; big-endian; interrupts = <17 2>; interrupt-parent = <&mpic>; }; }; }; + chosen { + linux,stdout-path = "/tsi108@c0000000/serial@7808"; + }; }; diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts index 1934b800278e..7285ca1325fd 100644 --- a/arch/powerpc/boot/dts/mpc8272ads.dts +++ b/arch/powerpc/boot/dts/mpc8272ads.dts @@ -10,207 +10,240 @@ */ / { - model = "MPC8272ADS"; - compatible = "MPC8260ADS"; - #address-cells = <1>; - #size-cells = <1>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8272@0 { - device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <4000>; // L1, 16K - i-cache-size = <4000>; // L1, 16K - timebase-frequency = <0>; - bus-frequency = <0>; - clock-frequency = <0>; - 32-bit; - }; - }; - - pci_pic: interrupt-controller@f8200000 { - #address-cells = <0>; - #interrupt-cells = <2>; - interrupt-controller; - reg = <f8200000 f8200004>; - built-in; - device_type = "pci-pic"; - }; - memory { - device_type = "memory"; - reg = <00000000 4000000 f4500000 00000020>; - }; - - chosen { - name = "chosen"; - linux,platform = <0>; - interrupt-controller = <&Cpm_pic>; - }; - - soc8272@f0000000 { - #address-cells = <1>; - #size-cells = <1>; - #interrupt-cells = <2>; - device_type = "soc"; - ranges = <00000000 f0000000 00053000>; - reg = <f0000000 10000>; - - mdio@0 { - device_type = "mdio"; - compatible = "fs_enet"; - reg = <0 0>; - #address-cells = <1>; - #size-cells = <0>; - phy0:ethernet-phy@0 { - interrupt-parent = <&Cpm_pic>; - interrupts = <17 4>; - reg = <0>; - bitbang = [ 12 12 13 02 02 01 ]; - device_type = "ethernet-phy"; - }; - phy1:ethernet-phy@1 { - interrupt-parent = <&Cpm_pic>; - interrupts = <17 4>; - bitbang = [ 12 12 13 02 02 01 ]; - reg = <3>; - device_type = "ethernet-phy"; - }; - }; - - ethernet@24000 { - #address-cells = <1>; - #size-cells = <0>; - device_type = "network"; - device-id = <1>; - compatible = "fs_enet"; - model = "FCC"; - reg = <11300 20 8400 100 11380 30>; - mac-address = [ 00 11 2F 99 43 54 ]; - interrupts = <20 2>; - interrupt-parent = <&Cpm_pic>; - phy-handle = <&Phy0>; - rx-clock = <13>; - tx-clock = <12>; - }; - - ethernet@25000 { - device_type = "network"; - device-id = <2>; - compatible = "fs_enet"; - model = "FCC"; - reg = <11320 20 8500 100 113b0 30>; - mac-address = [ 00 11 2F 99 44 54 ]; - interrupts = <21 2>; - interrupt-parent = <&Cpm_pic>; - phy-handle = <&Phy1>; - rx-clock = <17>; - tx-clock = <18>; - }; - - cpm@f0000000 { - #address-cells = <1>; - #size-cells = <1>; - #interrupt-cells = <2>; - device_type = "cpm"; - model = "CPM2"; - ranges = <00000000 00000000 20000>; - reg = <0 20000>; - command-proc = <119c0>; - brg-frequency = <17D7840>; - cpm_clk = <BEBC200>; - - scc@11a00 { - device_type = "serial"; - compatible = "cpm_uart"; - model = "SCC"; - device-id = <1>; - reg = <11a00 20 8000 100>; - current-speed = <1c200>; - interrupts = <28 2>; - interrupt-parent = <&Cpm_pic>; - clock-setup = <0 00ffffff>; - rx-clock = <1>; - tx-clock = <1>; - }; - - scc@11a60 { - device_type = "serial"; - compatible = "cpm_uart"; - model = "SCC"; - device-id = <4>; - reg = <11a60 20 8300 100>; - current-speed = <1c200>; - interrupts = <2b 2>; - interrupt-parent = <&Cpm_pic>; - clock-setup = <1b ffffff00>; - rx-clock = <4>; - tx-clock = <4>; - }; - - }; - cpm_pic:interrupt-controller@10c00 { - #address-cells = <0>; - #interrupt-cells = <2>; - interrupt-controller; - reg = <10c00 80>; - built-in; - device_type = "cpm-pic"; - compatible = "CPM2"; - }; - pci@0500 { - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - compatible = "8272"; - device_type = "pci"; - reg = <10430 4dc>; - clock-frequency = <3f940aa>; - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < - - /* IDSEL 0x16 */ - b000 0 0 1 f8200000 40 8 - b000 0 0 2 f8200000 41 8 - b000 0 0 3 f8200000 42 8 - b000 0 0 4 f8200000 43 8 - - /* IDSEL 0x17 */ - b800 0 0 1 f8200000 43 8 - b800 0 0 2 f8200000 40 8 - b800 0 0 3 f8200000 41 8 - b800 0 0 4 f8200000 42 8 - - /* IDSEL 0x18 */ - c000 0 0 1 f8200000 42 8 - c000 0 0 2 f8200000 43 8 - c000 0 0 3 f8200000 40 8 - c000 0 0 4 f8200000 41 8>; - interrupt-parent = <&Cpm_pic>; - interrupts = <14 8>; - bus-range = <0 0>; - ranges = <02000000 0 80000000 80000000 0 40000000 - 01000000 0 00000000 f6000000 0 02000000>; - }; + model = "MPC8272ADS"; + compatible = "fsl,mpc8272ads"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8272@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <d#32>; + i-cache-line-size = <d#32>; + d-cache-size = <d#16384>; + i-cache-size = <d#16384>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0>; + }; + + localbus@f0010100 { + compatible = "fsl,mpc8272-localbus", + "fsl,pq2-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <f0010100 40>; + + ranges = <0 0 fe000000 02000000 + 1 0 f4500000 00008000 + 3 0 f8200000 00008000>; + + flash@0,0 { + compatible = "jedec-flash"; + reg = <0 0 2000000>; + bank-width = <4>; + device-width = <1>; + }; + + board-control@1,0 { + reg = <1 0 20>; + compatible = "fsl,mpc8272ads-bcsr"; + }; + + PCI_PIC: interrupt-controller@3,0 { + compatible = "fsl,mpc8272ads-pci-pic", + "fsl,pq2ads-pci-pic"; + #interrupt-cells = <1>; + interrupt-controller; + reg = <3 0 8>; + interrupt-parent = <&PIC>; + interrupts = <14 8>; + }; + }; + + + pci@f0010800 { + device_type = "pci"; + reg = <f0010800 10c f00101ac 8 f00101c4 8>; + compatible = "fsl,mpc8272-pci", "fsl,pq2-pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + clock-frequency = <d#66666666>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 0x16 */ + b000 0 0 1 &PCI_PIC 0 + b000 0 0 2 &PCI_PIC 1 + b000 0 0 3 &PCI_PIC 2 + b000 0 0 4 &PCI_PIC 3 + + /* IDSEL 0x17 */ + b800 0 0 1 &PCI_PIC 4 + b800 0 0 2 &PCI_PIC 5 + b800 0 0 3 &PCI_PIC 6 + b800 0 0 4 &PCI_PIC 7 + + /* IDSEL 0x18 */ + c000 0 0 1 &PCI_PIC 8 + c000 0 0 2 &PCI_PIC 9 + c000 0 0 3 &PCI_PIC a + c000 0 0 4 &PCI_PIC b>; + + interrupt-parent = <&PIC>; + interrupts = <12 8>; + ranges = <42000000 0 80000000 80000000 0 20000000 + 02000000 0 a0000000 a0000000 0 20000000 + 01000000 0 00000000 f6000000 0 02000000>; + }; + + soc@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8272", "fsl,pq2-soc"; + ranges = <00000000 f0000000 00053000>; + + // Temporary -- will go away once kernel uses ranges for get_immrbase(). + reg = <f0000000 00053000>; + + cpm@119c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8272-cpm", "fsl,cpm2"; + reg = <119c0 30>; + ranges; + + muram@0 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0 2000 9800 800>; + }; + }; + + brg@119f0 { + compatible = "fsl,mpc8272-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <119f0 10 115f0 10>; + }; + + serial@11a00 { + device_type = "serial"; + compatible = "fsl,mpc8272-scc-uart", + "fsl,cpm2-scc-uart"; + reg = <11a00 20 8000 100>; + interrupts = <28 8>; + interrupt-parent = <&PIC>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <00800000>; + }; + + serial@11a60 { + device_type = "serial"; + compatible = "fsl,mpc8272-scc-uart", + "fsl,cpm2-scc-uart"; + reg = <11a60 20 8300 100>; + interrupts = <2b 8>; + interrupt-parent = <&PIC>; + fsl,cpm-brg = <4>; + fsl,cpm-command = <0ce00000>; + }; + + mdio@10d40 { + device_type = "mdio"; + compatible = "fsl,mpc8272ads-mdio-bitbang", + "fsl,mpc8272-mdio-bitbang", + "fsl,cpm2-mdio-bitbang"; + reg = <10d40 14>; + #address-cells = <1>; + #size-cells = <0>; + fsl,mdio-pin = <12>; + fsl,mdc-pin = <13>; + + PHY0: ethernet-phy@0 { + interrupt-parent = <&PIC>; + interrupts = <17 8>; + reg = <0>; + device_type = "ethernet-phy"; + }; + + PHY1: ethernet-phy@1 { + interrupt-parent = <&PIC>; + interrupts = <17 8>; + reg = <3>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@11300 { + device_type = "network"; + compatible = "fsl,mpc8272-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <11300 20 8400 100 11390 1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <20 8>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY0>; + linux,network-index = <0>; + fsl,cpm-command = <12000300>; + }; + + ethernet@11320 { + device_type = "network"; + compatible = "fsl,mpc8272-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <11320 20 8500 100 113b0 1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <21 8>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY1>; + linux,network-index = <1>; + fsl,cpm-command = <16200300>; + }; + }; + + PIC: interrupt-controller@10c00 { + #interrupt-cells = <2>; + interrupt-controller; + reg = <10c00 80>; + compatible = "fsl,mpc8272-pic", "fsl,cpm2-pic"; + }; /* May need to remove if on a part without crypto engine */ - crypto@30000 { - device_type = "crypto"; - model = "SEC2"; - compatible = "talitos"; - reg = <30000 10000>; - interrupts = <b 2>; - interrupt-parent = <&Cpm_pic>; - num-channels = <4>; - channel-fifo-len = <18>; - exec-units-mask = <0000007e>; + crypto@30000 { + device_type = "crypto"; + model = "SEC2"; + compatible = "fsl,mpc8272-talitos-sec2", + "fsl,talitos-sec2", + "fsl,talitos", + "talitos"; + reg = <30000 10000>; + interrupts = <b 8>; + interrupt-parent = <&PIC>; + num-channels = <4>; + channel-fifo-len = <18>; + exec-units-mask = <0000007e>; /* desc mask is for rev1.x, we need runtime fixup for >=2.x */ - descriptor-types-mask = <01010ebf>; - }; + descriptor-types-mask = <01010ebf>; + }; + }; - }; + chosen { + linux,stdout-path = "/soc/cpm/serial@11a00"; + }; }; diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts index c5adbe40364e..9e7eba973262 100644 --- a/arch/powerpc/boot/dts/mpc8313erdb.dts +++ b/arch/powerpc/boot/dts/mpc8313erdb.dts @@ -29,7 +29,6 @@ timebase-frequency = <0>; // from bootloader bus-frequency = <0>; // from bootloader clock-frequency = <0>; // from bootloader - 32-bit; }; }; @@ -41,7 +40,6 @@ soc8313@e0000000 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "soc"; ranges = <0 e0000000 00100000>; reg = <e0000000 00000200>; @@ -73,11 +71,11 @@ spi@7000 { device_type = "spi"; - compatible = "mpc83xx_spi"; + compatible = "fsl_spi"; reg = <7000 1000>; interrupts = <10 8>; interrupt-parent = < &ipic >; - mode = <0>; + mode = "cpu"; }; /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ @@ -152,36 +150,6 @@ interrupt-parent = < &ipic >; }; - pci@8500 { - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < - - /* IDSEL 0x0E -mini PCI */ - 7000 0 0 1 &ipic 12 8 - 7000 0 0 2 &ipic 12 8 - 7000 0 0 3 &ipic 12 8 - 7000 0 0 4 &ipic 12 8 - - /* IDSEL 0x0F - PCI slot */ - 7800 0 0 1 &ipic 11 8 - 7800 0 0 2 &ipic 12 8 - 7800 0 0 3 &ipic 11 8 - 7800 0 0 4 &ipic 12 8>; - interrupt-parent = < &ipic >; - interrupts = <42 8>; - bus-range = <0 0>; - ranges = <02000000 0 90000000 90000000 0 10000000 - 42000000 0 80000000 80000000 0 10000000 - 01000000 0 00000000 e2000000 0 00100000>; - clock-frequency = <3f940aa>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <8500 100>; - compatible = "fsl,mpc8349-pci"; - device_type = "pci"; - }; - crypto@30000 { device_type = "crypto"; model = "SEC2"; @@ -207,8 +175,37 @@ #address-cells = <0>; #interrupt-cells = <2>; reg = <700 100>; - built-in; device_type = "ipic"; }; }; + + pci@e0008500 { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x0E -mini PCI */ + 7000 0 0 1 &ipic 12 8 + 7000 0 0 2 &ipic 12 8 + 7000 0 0 3 &ipic 12 8 + 7000 0 0 4 &ipic 12 8 + + /* IDSEL 0x0F - PCI slot */ + 7800 0 0 1 &ipic 11 8 + 7800 0 0 2 &ipic 12 8 + 7800 0 0 3 &ipic 11 8 + 7800 0 0 4 &ipic 12 8>; + interrupt-parent = < &ipic >; + interrupts = <42 8>; + bus-range = <0 0>; + ranges = <02000000 0 90000000 90000000 0 10000000 + 42000000 0 80000000 80000000 0 10000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e0008500 100>; + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; }; diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts index f158ed781ba8..fcd333c391ec 100644 --- a/arch/powerpc/boot/dts/mpc832x_mds.dts +++ b/arch/powerpc/boot/dts/mpc832x_mds.dts @@ -29,7 +29,6 @@ timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; - 32-bit; }; }; @@ -46,7 +45,6 @@ soc8323@e0000000 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "soc"; ranges = <0 e0000000 00100000>; reg = <e0000000 00000200>; @@ -99,71 +97,11 @@ descriptor-types-mask = <0122003f>; }; - pci@8500 { - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < - /* IDSEL 0x11 AD17 */ - 8800 0 0 1 &ipic 14 8 - 8800 0 0 2 &ipic 15 8 - 8800 0 0 3 &ipic 16 8 - 8800 0 0 4 &ipic 17 8 - - /* IDSEL 0x12 AD18 */ - 9000 0 0 1 &ipic 16 8 - 9000 0 0 2 &ipic 17 8 - 9000 0 0 3 &ipic 14 8 - 9000 0 0 4 &ipic 15 8 - - /* IDSEL 0x13 AD19 */ - 9800 0 0 1 &ipic 17 8 - 9800 0 0 2 &ipic 14 8 - 9800 0 0 3 &ipic 15 8 - 9800 0 0 4 &ipic 16 8 - - /* IDSEL 0x15 AD21*/ - a800 0 0 1 &ipic 14 8 - a800 0 0 2 &ipic 15 8 - a800 0 0 3 &ipic 16 8 - a800 0 0 4 &ipic 17 8 - - /* IDSEL 0x16 AD22*/ - b000 0 0 1 &ipic 17 8 - b000 0 0 2 &ipic 14 8 - b000 0 0 3 &ipic 15 8 - b000 0 0 4 &ipic 16 8 - - /* IDSEL 0x17 AD23*/ - b800 0 0 1 &ipic 16 8 - b800 0 0 2 &ipic 17 8 - b800 0 0 3 &ipic 14 8 - b800 0 0 4 &ipic 15 8 - - /* IDSEL 0x18 AD24*/ - c000 0 0 1 &ipic 15 8 - c000 0 0 2 &ipic 16 8 - c000 0 0 3 &ipic 17 8 - c000 0 0 4 &ipic 14 8>; - interrupt-parent = < &ipic >; - interrupts = <42 8>; - bus-range = <0 0>; - ranges = <02000000 0 90000000 90000000 0 10000000 - 42000000 0 80000000 80000000 0 10000000 - 01000000 0 00000000 d0000000 0 00100000>; - clock-frequency = <0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <8500 100>; - compatible = "fsl,mpc8349-pci"; - device_type = "pci"; - }; - ipic: pic@700 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; reg = <700 100>; - built-in; device_type = "ipic"; }; @@ -333,10 +271,68 @@ #address-cells = <0>; #interrupt-cells = <1>; reg = <80 80>; - built-in; big-endian; interrupts = <20 8 21 8>; //high:32 low:33 interrupt-parent = < &ipic >; }; }; + + pci@e0008500 { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 0x11 AD17 */ + 8800 0 0 1 &ipic 14 8 + 8800 0 0 2 &ipic 15 8 + 8800 0 0 3 &ipic 16 8 + 8800 0 0 4 &ipic 17 8 + + /* IDSEL 0x12 AD18 */ + 9000 0 0 1 &ipic 16 8 + 9000 0 0 2 &ipic 17 8 + 9000 0 0 3 &ipic 14 8 + 9000 0 0 4 &ipic 15 8 + + /* IDSEL 0x13 AD19 */ + 9800 0 0 1 &ipic 17 8 + 9800 0 0 2 &ipic 14 8 + 9800 0 0 3 &ipic 15 8 + 9800 0 0 4 &ipic 16 8 + + /* IDSEL 0x15 AD21*/ + a800 0 0 1 &ipic 14 8 + a800 0 0 2 &ipic 15 8 + a800 0 0 3 &ipic 16 8 + a800 0 0 4 &ipic 17 8 + + /* IDSEL 0x16 AD22*/ + b000 0 0 1 &ipic 17 8 + b000 0 0 2 &ipic 14 8 + b000 0 0 3 &ipic 15 8 + b000 0 0 4 &ipic 16 8 + + /* IDSEL 0x17 AD23*/ + b800 0 0 1 &ipic 16 8 + b800 0 0 2 &ipic 17 8 + b800 0 0 3 &ipic 14 8 + b800 0 0 4 &ipic 15 8 + + /* IDSEL 0x18 AD24*/ + c000 0 0 1 &ipic 15 8 + c000 0 0 2 &ipic 16 8 + c000 0 0 3 &ipic 17 8 + c000 0 0 4 &ipic 14 8>; + interrupt-parent = < &ipic >; + interrupts = <42 8>; + bus-range = <0 0>; + ranges = <02000000 0 90000000 90000000 0 10000000 + 42000000 0 80000000 80000000 0 10000000 + 01000000 0 00000000 d0000000 0 00100000>; + clock-frequency = <0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e0008500 100>; + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; }; diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts index 7c4beff3e200..388c8a7012e1 100644 --- a/arch/powerpc/boot/dts/mpc832x_rdb.dts +++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts @@ -29,7 +29,6 @@ timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; - 32-bit; }; }; @@ -41,7 +40,6 @@ soc8323@e0000000 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "soc"; ranges = <0 e0000000 00100000>; reg = <e0000000 00000200>; @@ -94,45 +92,11 @@ descriptor-types-mask = <0122003f>; }; - pci@8500 { - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < - /* IDSEL 0x10 AD16 (USB) */ - 8000 0 0 1 &pic 11 8 - - /* IDSEL 0x11 AD17 (Mini1)*/ - 8800 0 0 1 &pic 12 8 - 8800 0 0 2 &pic 13 8 - 8800 0 0 3 &pic 14 8 - 8800 0 0 4 &pic 30 8 - - /* IDSEL 0x12 AD18 (PCI/Mini2) */ - 9000 0 0 1 &pic 13 8 - 9000 0 0 2 &pic 14 8 - 9000 0 0 3 &pic 30 8 - 9000 0 0 4 &pic 11 8>; - - interrupt-parent = <&pic>; - interrupts = <42 8>; - bus-range = <0 0>; - ranges = <42000000 0 80000000 80000000 0 10000000 - 02000000 0 90000000 90000000 0 10000000 - 01000000 0 d0000000 d0000000 0 04000000>; - clock-frequency = <0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <8500 100>; - compatible = "fsl,mpc8349-pci"; - device_type = "pci"; - }; - pic:pic@700 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; reg = <700 100>; - built-in; device_type = "ipic"; }; @@ -211,7 +175,7 @@ reg = <4c0 40>; interrupts = <2>; interrupt-parent = <&qeic>; - mode = "cpu"; + mode = "cpu-qe"; }; spi@500 { @@ -292,10 +256,42 @@ #address-cells = <0>; #interrupt-cells = <1>; reg = <80 80>; - built-in; big-endian; interrupts = <20 8 21 8>; //high:32 low:33 interrupt-parent = <&pic>; }; }; + + pci@e0008500 { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 0x10 AD16 (USB) */ + 8000 0 0 1 &pic 11 8 + + /* IDSEL 0x11 AD17 (Mini1)*/ + 8800 0 0 1 &pic 12 8 + 8800 0 0 2 &pic 13 8 + 8800 0 0 3 &pic 14 8 + 8800 0 0 4 &pic 30 8 + + /* IDSEL 0x12 AD18 (PCI/Mini2) */ + 9000 0 0 1 &pic 13 8 + 9000 0 0 2 &pic 14 8 + 9000 0 0 3 &pic 30 8 + 9000 0 0 4 &pic 11 8>; + + interrupt-parent = <&pic>; + interrupts = <42 8>; + bus-range = <0 0>; + ranges = <42000000 0 80000000 80000000 0 10000000 + 02000000 0 90000000 90000000 0 10000000 + 01000000 0 d0000000 d0000000 0 04000000>; + clock-frequency = <0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e0008500 100>; + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; }; diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts index 44c065a6b5e7..5072f6d0a46d 100644 --- a/arch/powerpc/boot/dts/mpc8349emitx.dts +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts @@ -28,7 +28,6 @@ timebase-frequency = <0>; // from bootloader bus-frequency = <0>; // from bootloader clock-frequency = <0>; // from bootloader - 32-bit; }; }; @@ -40,7 +39,6 @@ soc8349@e0000000 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "soc"; ranges = <0 e0000000 00100000>; reg = <e0000000 00000200>; @@ -72,11 +70,11 @@ spi@7000 { device_type = "spi"; - compatible = "mpc83xx_spi"; + compatible = "fsl_spi"; reg = <7000 1000>; interrupts = <10 8>; interrupt-parent = < &ipic >; - mode = <0>; + mode = "cpu"; }; usb@22000 { @@ -142,6 +140,7 @@ interrupts = <20 8 21 8 22 8>; interrupt-parent = < &ipic >; phy-handle = < &phy1c >; + linux,network-index = <0>; }; ethernet@25000 { @@ -161,6 +160,7 @@ interrupts = <23 8 24 8 25 8>; interrupt-parent = < &ipic >; phy-handle = < &phy1f >; + linux,network-index = <1>; }; serial@4500 { @@ -181,52 +181,6 @@ interrupt-parent = < &ipic >; }; - pci@8500 { - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < - /* IDSEL 0x10 - SATA */ - 8000 0 0 1 &ipic 16 8 /* SATA_INTA */ - >; - interrupt-parent = < &ipic >; - interrupts = <42 8>; - bus-range = <0 0>; - ranges = <42000000 0 80000000 80000000 0 10000000 - 02000000 0 90000000 90000000 0 10000000 - 01000000 0 00000000 e2000000 0 01000000>; - clock-frequency = <3f940aa>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <8500 100>; - compatible = "fsl,mpc8349-pci"; - device_type = "pci"; - }; - - pci@8600 { - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0E - MiniPCI Slot */ - 7000 0 0 1 &ipic 15 8 /* PCI_INTA */ - - /* IDSEL 0x0F - PCI Slot */ - 7800 0 0 1 &ipic 14 8 /* PCI_INTA */ - 7800 0 0 2 &ipic 15 8 /* PCI_INTB */ - >; - interrupt-parent = < &ipic >; - interrupts = <43 8>; - bus-range = <1 1>; - ranges = <42000000 0 a0000000 a0000000 0 10000000 - 02000000 0 b0000000 b0000000 0 10000000 - 01000000 0 00000000 e3000000 0 01000000>; - clock-frequency = <3f940aa>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <8600 100>; - compatible = "fsl,mpc8349-pci"; - device_type = "pci"; - }; - crypto@30000 { device_type = "crypto"; model = "SEC2"; @@ -245,8 +199,56 @@ #address-cells = <0>; #interrupt-cells = <2>; reg = <700 100>; - built-in; device_type = "ipic"; }; }; + + pci@e0008500 { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 0x10 - SATA */ + 8000 0 0 1 &ipic 16 8 /* SATA_INTA */ + >; + interrupt-parent = < &ipic >; + interrupts = <42 8>; + bus-range = <0 0>; + ranges = <42000000 0 80000000 80000000 0 10000000 + 02000000 0 90000000 90000000 0 10000000 + 01000000 0 00000000 e2000000 0 01000000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e0008500 100>; + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; + + pci@e0008600 { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0E - MiniPCI Slot */ + 7000 0 0 1 &ipic 15 8 /* PCI_INTA */ + + /* IDSEL 0x0F - PCI Slot */ + 7800 0 0 1 &ipic 14 8 /* PCI_INTA */ + 7800 0 0 2 &ipic 15 8 /* PCI_INTB */ + >; + interrupt-parent = < &ipic >; + interrupts = <43 8>; + bus-range = <0 0>; + ranges = <42000000 0 a0000000 a0000000 0 10000000 + 02000000 0 b0000000 b0000000 0 10000000 + 01000000 0 00000000 e3000000 0 01000000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e0008600 100>; + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; + + + }; diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts index 0b8387141d88..074f7a2ab7e4 100644 --- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts +++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts @@ -28,7 +28,6 @@ timebase-frequency = <0>; // from bootloader bus-frequency = <0>; // from bootloader clock-frequency = <0>; // from bootloader - 32-bit; }; }; @@ -40,7 +39,6 @@ soc8349@e0000000 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "soc"; ranges = <0 e0000000 00100000>; reg = <e0000000 00000200>; @@ -72,11 +70,11 @@ spi@7000 { device_type = "spi"; - compatible = "mpc83xx_spi"; + compatible = "fsl_spi"; reg = <7000 1000>; interrupts = <10 8>; interrupt-parent = < &ipic >; - mode = <0>; + mode = "cpu"; }; usb@23000 { @@ -116,6 +114,7 @@ interrupts = <20 8 21 8 22 8>; interrupt-parent = < &ipic >; phy-handle = < &phy1c >; + linux,network-index = <0>; }; serial@4500 { @@ -136,28 +135,6 @@ interrupt-parent = < &ipic >; }; - pci@8600 { - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0F - PCI Slot */ - 7800 0 0 1 &ipic 14 8 /* PCI_INTA */ - 7800 0 0 2 &ipic 15 8 /* PCI_INTB */ - >; - interrupt-parent = < &ipic >; - interrupts = <43 8>; - bus-range = <1 1>; - ranges = <42000000 0 a0000000 a0000000 0 10000000 - 02000000 0 b0000000 b0000000 0 10000000 - 01000000 0 00000000 e3000000 0 01000000>; - clock-frequency = <3f940aa>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <8600 100>; - compatible = "fsl,mpc8349-pci"; - device_type = "pci"; - }; - crypto@30000 { device_type = "crypto"; model = "SEC2"; @@ -176,8 +153,29 @@ #address-cells = <0>; #interrupt-cells = <2>; reg = <700 100>; - built-in; device_type = "ipic"; }; }; + + pci@e0008600 { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0F - PCI Slot */ + 7800 0 0 1 &ipic 14 8 /* PCI_INTA */ + 7800 0 0 2 &ipic 15 8 /* PCI_INTB */ + >; + interrupt-parent = < &ipic >; + interrupts = <43 8>; + bus-range = <1 1>; + ranges = <42000000 0 a0000000 a0000000 0 10000000 + 02000000 0 b0000000 b0000000 0 10000000 + 01000000 0 00000000 e3000000 0 01000000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e0008600 100>; + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; }; diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts index 481099756e44..e5a84ef9f4b0 100644 --- a/arch/powerpc/boot/dts/mpc834x_mds.dts +++ b/arch/powerpc/boot/dts/mpc834x_mds.dts @@ -29,7 +29,6 @@ timebase-frequency = <0>; // from bootloader bus-frequency = <0>; // from bootloader clock-frequency = <0>; // from bootloader - 32-bit; }; }; @@ -46,7 +45,6 @@ soc8349@e0000000 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "soc"; ranges = <0 e0000000 00100000>; reg = <e0000000 00000200>; @@ -78,11 +76,11 @@ spi@7000 { device_type = "spi"; - compatible = "mpc83xx_spi"; + compatible = "fsl_spi"; reg = <7000 1000>; interrupts = <10 8>; interrupt-parent = < &ipic >; - mode = <0>; + mode = "cpu"; }; /* phy type (ULPI or SERIAL) are only types supportted for MPH */ @@ -146,6 +144,7 @@ interrupts = <20 8 21 8 22 8>; interrupt-parent = < &ipic >; phy-handle = < &phy0 >; + linux,network-index = <0>; }; ethernet@25000 { @@ -165,6 +164,7 @@ interrupts = <23 8 24 8 25 8>; interrupt-parent = < &ipic >; phy-handle = < &phy1 >; + linux,network-index = <1>; }; serial@4500 { @@ -185,126 +185,6 @@ interrupt-parent = < &ipic >; }; - pci@8500 { - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < - - /* IDSEL 0x11 */ - 8800 0 0 1 &ipic 14 8 - 8800 0 0 2 &ipic 15 8 - 8800 0 0 3 &ipic 16 8 - 8800 0 0 4 &ipic 17 8 - - /* IDSEL 0x12 */ - 9000 0 0 1 &ipic 16 8 - 9000 0 0 2 &ipic 17 8 - 9000 0 0 3 &ipic 14 8 - 9000 0 0 4 &ipic 15 8 - - /* IDSEL 0x13 */ - 9800 0 0 1 &ipic 17 8 - 9800 0 0 2 &ipic 14 8 - 9800 0 0 3 &ipic 15 8 - 9800 0 0 4 &ipic 16 8 - - /* IDSEL 0x15 */ - a800 0 0 1 &ipic 14 8 - a800 0 0 2 &ipic 15 8 - a800 0 0 3 &ipic 16 8 - a800 0 0 4 &ipic 17 8 - - /* IDSEL 0x16 */ - b000 0 0 1 &ipic 17 8 - b000 0 0 2 &ipic 14 8 - b000 0 0 3 &ipic 15 8 - b000 0 0 4 &ipic 16 8 - - /* IDSEL 0x17 */ - b800 0 0 1 &ipic 16 8 - b800 0 0 2 &ipic 17 8 - b800 0 0 3 &ipic 14 8 - b800 0 0 4 &ipic 15 8 - - /* IDSEL 0x18 */ - c000 0 0 1 &ipic 15 8 - c000 0 0 2 &ipic 16 8 - c000 0 0 3 &ipic 17 8 - c000 0 0 4 &ipic 14 8>; - interrupt-parent = < &ipic >; - interrupts = <42 8>; - bus-range = <0 0>; - ranges = <02000000 0 90000000 90000000 0 10000000 - 42000000 0 80000000 80000000 0 10000000 - 01000000 0 00000000 e2000000 0 00100000>; - clock-frequency = <3f940aa>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <8500 100>; - compatible = "fsl,mpc8349-pci"; - device_type = "pci"; - }; - - pci@8600 { - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < - - /* IDSEL 0x11 */ - 8800 0 0 1 &ipic 14 8 - 8800 0 0 2 &ipic 15 8 - 8800 0 0 3 &ipic 16 8 - 8800 0 0 4 &ipic 17 8 - - /* IDSEL 0x12 */ - 9000 0 0 1 &ipic 16 8 - 9000 0 0 2 &ipic 17 8 - 9000 0 0 3 &ipic 14 8 - 9000 0 0 4 &ipic 15 8 - - /* IDSEL 0x13 */ - 9800 0 0 1 &ipic 17 8 - 9800 0 0 2 &ipic 14 8 - 9800 0 0 3 &ipic 15 8 - 9800 0 0 4 &ipic 16 8 - - /* IDSEL 0x15 */ - a800 0 0 1 &ipic 14 8 - a800 0 0 2 &ipic 15 8 - a800 0 0 3 &ipic 16 8 - a800 0 0 4 &ipic 17 8 - - /* IDSEL 0x16 */ - b000 0 0 1 &ipic 17 8 - b000 0 0 2 &ipic 14 8 - b000 0 0 3 &ipic 15 8 - b000 0 0 4 &ipic 16 8 - - /* IDSEL 0x17 */ - b800 0 0 1 &ipic 16 8 - b800 0 0 2 &ipic 17 8 - b800 0 0 3 &ipic 14 8 - b800 0 0 4 &ipic 15 8 - - /* IDSEL 0x18 */ - c000 0 0 1 &ipic 15 8 - c000 0 0 2 &ipic 16 8 - c000 0 0 3 &ipic 17 8 - c000 0 0 4 &ipic 14 8>; - interrupt-parent = < &ipic >; - interrupts = <42 8>; - bus-range = <0 0>; - ranges = <02000000 0 b0000000 b0000000 0 10000000 - 42000000 0 a0000000 a0000000 0 10000000 - 01000000 0 00000000 e2100000 0 00100000>; - clock-frequency = <3f940aa>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <8600 100>; - compatible = "fsl,mpc8349-pci"; - device_type = "pci"; - }; - /* May need to remove if on a part without crypto engine */ crypto@30000 { device_type = "crypto"; @@ -332,8 +212,127 @@ #address-cells = <0>; #interrupt-cells = <2>; reg = <700 100>; - built-in; device_type = "ipic"; }; }; + + pci@e0008500 { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x11 */ + 8800 0 0 1 &ipic 14 8 + 8800 0 0 2 &ipic 15 8 + 8800 0 0 3 &ipic 16 8 + 8800 0 0 4 &ipic 17 8 + + /* IDSEL 0x12 */ + 9000 0 0 1 &ipic 16 8 + 9000 0 0 2 &ipic 17 8 + 9000 0 0 3 &ipic 14 8 + 9000 0 0 4 &ipic 15 8 + + /* IDSEL 0x13 */ + 9800 0 0 1 &ipic 17 8 + 9800 0 0 2 &ipic 14 8 + 9800 0 0 3 &ipic 15 8 + 9800 0 0 4 &ipic 16 8 + + /* IDSEL 0x15 */ + a800 0 0 1 &ipic 14 8 + a800 0 0 2 &ipic 15 8 + a800 0 0 3 &ipic 16 8 + a800 0 0 4 &ipic 17 8 + + /* IDSEL 0x16 */ + b000 0 0 1 &ipic 17 8 + b000 0 0 2 &ipic 14 8 + b000 0 0 3 &ipic 15 8 + b000 0 0 4 &ipic 16 8 + + /* IDSEL 0x17 */ + b800 0 0 1 &ipic 16 8 + b800 0 0 2 &ipic 17 8 + b800 0 0 3 &ipic 14 8 + b800 0 0 4 &ipic 15 8 + + /* IDSEL 0x18 */ + c000 0 0 1 &ipic 15 8 + c000 0 0 2 &ipic 16 8 + c000 0 0 3 &ipic 17 8 + c000 0 0 4 &ipic 14 8>; + interrupt-parent = < &ipic >; + interrupts = <42 8>; + bus-range = <0 0>; + ranges = <02000000 0 90000000 90000000 0 10000000 + 42000000 0 80000000 80000000 0 10000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e0008500 100>; + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; + + pci@e0008600 { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x11 */ + 8800 0 0 1 &ipic 14 8 + 8800 0 0 2 &ipic 15 8 + 8800 0 0 3 &ipic 16 8 + 8800 0 0 4 &ipic 17 8 + + /* IDSEL 0x12 */ + 9000 0 0 1 &ipic 16 8 + 9000 0 0 2 &ipic 17 8 + 9000 0 0 3 &ipic 14 8 + 9000 0 0 4 &ipic 15 8 + + /* IDSEL 0x13 */ + 9800 0 0 1 &ipic 17 8 + 9800 0 0 2 &ipic 14 8 + 9800 0 0 3 &ipic 15 8 + 9800 0 0 4 &ipic 16 8 + + /* IDSEL 0x15 */ + a800 0 0 1 &ipic 14 8 + a800 0 0 2 &ipic 15 8 + a800 0 0 3 &ipic 16 8 + a800 0 0 4 &ipic 17 8 + + /* IDSEL 0x16 */ + b000 0 0 1 &ipic 17 8 + b000 0 0 2 &ipic 14 8 + b000 0 0 3 &ipic 15 8 + b000 0 0 4 &ipic 16 8 + + /* IDSEL 0x17 */ + b800 0 0 1 &ipic 16 8 + b800 0 0 2 &ipic 17 8 + b800 0 0 3 &ipic 14 8 + b800 0 0 4 &ipic 15 8 + + /* IDSEL 0x18 */ + c000 0 0 1 &ipic 15 8 + c000 0 0 2 &ipic 16 8 + c000 0 0 3 &ipic 17 8 + c000 0 0 4 &ipic 14 8>; + interrupt-parent = < &ipic >; + interrupts = <42 8>; + bus-range = <0 0>; + ranges = <02000000 0 b0000000 b0000000 0 10000000 + 42000000 0 a0000000 a0000000 0 10000000 + 01000000 0 00000000 e2100000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e0008600 100>; + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; }; diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts index e3f7c1282068..fbd1573c348b 100644 --- a/arch/powerpc/boot/dts/mpc836x_mds.dts +++ b/arch/powerpc/boot/dts/mpc836x_mds.dts @@ -34,7 +34,6 @@ timebase-frequency = <3EF1480>; bus-frequency = <FBC5200>; clock-frequency = <1F78A400>; - 32-bit; }; }; @@ -51,7 +50,6 @@ soc8360@e0000000 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "soc"; ranges = <0 e0000000 00100000>; reg = <e0000000 00000200>; @@ -113,72 +111,11 @@ descriptor-types-mask = <01010ebf>; }; - pci@8500 { - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < - - /* IDSEL 0x11 AD17 */ - 8800 0 0 1 &ipic 14 8 - 8800 0 0 2 &ipic 15 8 - 8800 0 0 3 &ipic 16 8 - 8800 0 0 4 &ipic 17 8 - - /* IDSEL 0x12 AD18 */ - 9000 0 0 1 &ipic 16 8 - 9000 0 0 2 &ipic 17 8 - 9000 0 0 3 &ipic 14 8 - 9000 0 0 4 &ipic 15 8 - - /* IDSEL 0x13 AD19 */ - 9800 0 0 1 &ipic 17 8 - 9800 0 0 2 &ipic 14 8 - 9800 0 0 3 &ipic 15 8 - 9800 0 0 4 &ipic 16 8 - - /* IDSEL 0x15 AD21*/ - a800 0 0 1 &ipic 14 8 - a800 0 0 2 &ipic 15 8 - a800 0 0 3 &ipic 16 8 - a800 0 0 4 &ipic 17 8 - - /* IDSEL 0x16 AD22*/ - b000 0 0 1 &ipic 17 8 - b000 0 0 2 &ipic 14 8 - b000 0 0 3 &ipic 15 8 - b000 0 0 4 &ipic 16 8 - - /* IDSEL 0x17 AD23*/ - b800 0 0 1 &ipic 16 8 - b800 0 0 2 &ipic 17 8 - b800 0 0 3 &ipic 14 8 - b800 0 0 4 &ipic 15 8 - - /* IDSEL 0x18 AD24*/ - c000 0 0 1 &ipic 15 8 - c000 0 0 2 &ipic 16 8 - c000 0 0 3 &ipic 17 8 - c000 0 0 4 &ipic 14 8>; - interrupt-parent = < &ipic >; - interrupts = <42 8>; - bus-range = <0 0>; - ranges = <02000000 0 a0000000 a0000000 0 10000000 - 42000000 0 80000000 80000000 0 10000000 - 01000000 0 00000000 e2000000 0 00100000>; - clock-frequency = <3f940aa>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <8500 100>; - compatible = "fsl,mpc8349-pci"; - device_type = "pci"; - }; - ipic: pic@700 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; reg = <700 100>; - built-in; device_type = "ipic"; }; @@ -364,11 +301,69 @@ #address-cells = <0>; #interrupt-cells = <1>; reg = <80 80>; - built-in; big-endian; interrupts = <20 8 21 8>; //high:32 low:33 interrupt-parent = < &ipic >; }; + }; + pci@e0008500 { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x11 AD17 */ + 8800 0 0 1 &ipic 14 8 + 8800 0 0 2 &ipic 15 8 + 8800 0 0 3 &ipic 16 8 + 8800 0 0 4 &ipic 17 8 + + /* IDSEL 0x12 AD18 */ + 9000 0 0 1 &ipic 16 8 + 9000 0 0 2 &ipic 17 8 + 9000 0 0 3 &ipic 14 8 + 9000 0 0 4 &ipic 15 8 + + /* IDSEL 0x13 AD19 */ + 9800 0 0 1 &ipic 17 8 + 9800 0 0 2 &ipic 14 8 + 9800 0 0 3 &ipic 15 8 + 9800 0 0 4 &ipic 16 8 + + /* IDSEL 0x15 AD21*/ + a800 0 0 1 &ipic 14 8 + a800 0 0 2 &ipic 15 8 + a800 0 0 3 &ipic 16 8 + a800 0 0 4 &ipic 17 8 + + /* IDSEL 0x16 AD22*/ + b000 0 0 1 &ipic 17 8 + b000 0 0 2 &ipic 14 8 + b000 0 0 3 &ipic 15 8 + b000 0 0 4 &ipic 16 8 + + /* IDSEL 0x17 AD23*/ + b800 0 0 1 &ipic 16 8 + b800 0 0 2 &ipic 17 8 + b800 0 0 3 &ipic 14 8 + b800 0 0 4 &ipic 15 8 + + /* IDSEL 0x18 AD24*/ + c000 0 0 1 &ipic 15 8 + c000 0 0 2 &ipic 16 8 + c000 0 0 3 &ipic 17 8 + c000 0 0 4 &ipic 14 8>; + interrupt-parent = < &ipic >; + interrupts = <42 8>; + bus-range = <0 0>; + ranges = <02000000 0 a0000000 a0000000 0 10000000 + 42000000 0 80000000 80000000 0 10000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e0008500 100>; + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; }; }; diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts index fc8dff9f6201..6442a717ec3b 100644 --- a/arch/powerpc/boot/dts/mpc8540ads.dts +++ b/arch/powerpc/boot/dts/mpc8540ads.dts @@ -30,7 +30,6 @@ timebase-frequency = <0>; // 33 MHz, from uboot bus-frequency = <0>; // 166 MHz clock-frequency = <0>; // 825 MHz, from uboot - 32-bit; }; }; @@ -42,7 +41,6 @@ soc8540@e0000000 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "soc"; ranges = <0 e0000000 00100000>; reg = <e0000000 00100000>; // CCSRBAR 1M @@ -173,105 +171,104 @@ interrupts = <2a 2>; interrupt-parent = <&mpic>; }; - pci@8000 { - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < + mpic: pic@40000 { + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + }; - /* IDSEL 0x02 */ - 1000 0 0 1 &mpic 1 1 - 1000 0 0 2 &mpic 2 1 - 1000 0 0 3 &mpic 3 1 - 1000 0 0 4 &mpic 4 1 + pci@e0008000 { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < - /* IDSEL 0x03 */ - 1800 0 0 1 &mpic 4 1 - 1800 0 0 2 &mpic 1 1 - 1800 0 0 3 &mpic 2 1 - 1800 0 0 4 &mpic 3 1 + /* IDSEL 0x02 */ + 1000 0 0 1 &mpic 1 1 + 1000 0 0 2 &mpic 2 1 + 1000 0 0 3 &mpic 3 1 + 1000 0 0 4 &mpic 4 1 - /* IDSEL 0x04 */ - 2000 0 0 1 &mpic 3 1 - 2000 0 0 2 &mpic 4 1 - 2000 0 0 3 &mpic 1 1 - 2000 0 0 4 &mpic 2 1 + /* IDSEL 0x03 */ + 1800 0 0 1 &mpic 4 1 + 1800 0 0 2 &mpic 1 1 + 1800 0 0 3 &mpic 2 1 + 1800 0 0 4 &mpic 3 1 - /* IDSEL 0x05 */ - 2800 0 0 1 &mpic 2 1 - 2800 0 0 2 &mpic 3 1 - 2800 0 0 3 &mpic 4 1 - 2800 0 0 4 &mpic 1 1 + /* IDSEL 0x04 */ + 2000 0 0 1 &mpic 3 1 + 2000 0 0 2 &mpic 4 1 + 2000 0 0 3 &mpic 1 1 + 2000 0 0 4 &mpic 2 1 - /* IDSEL 0x0c */ - 6000 0 0 1 &mpic 1 1 - 6000 0 0 2 &mpic 2 1 - 6000 0 0 3 &mpic 3 1 - 6000 0 0 4 &mpic 4 1 + /* IDSEL 0x05 */ + 2800 0 0 1 &mpic 2 1 + 2800 0 0 2 &mpic 3 1 + 2800 0 0 3 &mpic 4 1 + 2800 0 0 4 &mpic 1 1 - /* IDSEL 0x0d */ - 6800 0 0 1 &mpic 4 1 - 6800 0 0 2 &mpic 1 1 - 6800 0 0 3 &mpic 2 1 - 6800 0 0 4 &mpic 3 1 + /* IDSEL 0x0c */ + 6000 0 0 1 &mpic 1 1 + 6000 0 0 2 &mpic 2 1 + 6000 0 0 3 &mpic 3 1 + 6000 0 0 4 &mpic 4 1 - /* IDSEL 0x0e */ - 7000 0 0 1 &mpic 3 1 - 7000 0 0 2 &mpic 4 1 - 7000 0 0 3 &mpic 1 1 - 7000 0 0 4 &mpic 2 1 + /* IDSEL 0x0d */ + 6800 0 0 1 &mpic 4 1 + 6800 0 0 2 &mpic 1 1 + 6800 0 0 3 &mpic 2 1 + 6800 0 0 4 &mpic 3 1 - /* IDSEL 0x0f */ - 7800 0 0 1 &mpic 2 1 - 7800 0 0 2 &mpic 3 1 - 7800 0 0 3 &mpic 4 1 - 7800 0 0 4 &mpic 1 1 + /* IDSEL 0x0e */ + 7000 0 0 1 &mpic 3 1 + 7000 0 0 2 &mpic 4 1 + 7000 0 0 3 &mpic 1 1 + 7000 0 0 4 &mpic 2 1 - /* IDSEL 0x12 */ - 9000 0 0 1 &mpic 1 1 - 9000 0 0 2 &mpic 2 1 - 9000 0 0 3 &mpic 3 1 - 9000 0 0 4 &mpic 4 1 + /* IDSEL 0x0f */ + 7800 0 0 1 &mpic 2 1 + 7800 0 0 2 &mpic 3 1 + 7800 0 0 3 &mpic 4 1 + 7800 0 0 4 &mpic 1 1 - /* IDSEL 0x13 */ - 9800 0 0 1 &mpic 4 1 - 9800 0 0 2 &mpic 1 1 - 9800 0 0 3 &mpic 2 1 - 9800 0 0 4 &mpic 3 1 + /* IDSEL 0x12 */ + 9000 0 0 1 &mpic 1 1 + 9000 0 0 2 &mpic 2 1 + 9000 0 0 3 &mpic 3 1 + 9000 0 0 4 &mpic 4 1 - /* IDSEL 0x14 */ - a000 0 0 1 &mpic 3 1 - a000 0 0 2 &mpic 4 1 - a000 0 0 3 &mpic 1 1 - a000 0 0 4 &mpic 2 1 + /* IDSEL 0x13 */ + 9800 0 0 1 &mpic 4 1 + 9800 0 0 2 &mpic 1 1 + 9800 0 0 3 &mpic 2 1 + 9800 0 0 4 &mpic 3 1 - /* IDSEL 0x15 */ - a800 0 0 1 &mpic 2 1 - a800 0 0 2 &mpic 3 1 - a800 0 0 3 &mpic 4 1 - a800 0 0 4 &mpic 1 1>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - bus-range = <0 0>; - ranges = <02000000 0 80000000 80000000 0 20000000 - 01000000 0 00000000 e2000000 0 00100000>; - clock-frequency = <3f940aa>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <8000 1000>; - compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; - device_type = "pci"; - }; + /* IDSEL 0x14 */ + a000 0 0 1 &mpic 3 1 + a000 0 0 2 &mpic 4 1 + a000 0 0 3 &mpic 1 1 + a000 0 0 4 &mpic 2 1 - mpic: pic@40000 { - clock-frequency = <0>; - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <40000 40000>; - built-in; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - big-endian; - }; + /* IDSEL 0x15 */ + a800 0 0 1 &mpic 2 1 + a800 0 0 2 &mpic 3 1 + a800 0 0 3 &mpic 4 1 + a800 0 0 4 &mpic 1 1>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + bus-range = <0 0>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e0008000 1000>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; }; }; diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts index fb0b647f8c2a..f3f4d79deb63 100644 --- a/arch/powerpc/boot/dts/mpc8541cds.dts +++ b/arch/powerpc/boot/dts/mpc8541cds.dts @@ -30,7 +30,6 @@ timebase-frequency = <0>; // 33 MHz, from uboot bus-frequency = <0>; // 166 MHz clock-frequency = <0>; // 825 MHz, from uboot - 32-bit; }; }; @@ -42,10 +41,9 @@ soc8541@e0000000 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "soc"; ranges = <0 e0000000 00100000>; - reg = <e0000000 00100000>; // CCSRBAR 1M + reg = <e0000000 00001000>; // CCSRBAR 1M bus-frequency = <0>; memory-controller@2000 { @@ -137,113 +135,145 @@ interrupt-parent = <&mpic>; }; - pci1: pci@8000 { - interrupt-map-mask = <1f800 0 0 7>; - interrupt-map = < - - /* IDSEL 0x10 */ - 08000 0 0 1 &mpic 0 1 - 08000 0 0 2 &mpic 1 1 - 08000 0 0 3 &mpic 2 1 - 08000 0 0 4 &mpic 3 1 - - /* IDSEL 0x11 */ - 08800 0 0 1 &mpic 0 1 - 08800 0 0 2 &mpic 1 1 - 08800 0 0 3 &mpic 2 1 - 08800 0 0 4 &mpic 3 1 - - /* IDSEL 0x12 (Slot 1) */ - 09000 0 0 1 &mpic 0 1 - 09000 0 0 2 &mpic 1 1 - 09000 0 0 3 &mpic 2 1 - 09000 0 0 4 &mpic 3 1 - - /* IDSEL 0x13 (Slot 2) */ - 09800 0 0 1 &mpic 1 1 - 09800 0 0 2 &mpic 2 1 - 09800 0 0 3 &mpic 3 1 - 09800 0 0 4 &mpic 0 1 - - /* IDSEL 0x14 (Slot 3) */ - 0a000 0 0 1 &mpic 2 1 - 0a000 0 0 2 &mpic 3 1 - 0a000 0 0 3 &mpic 0 1 - 0a000 0 0 4 &mpic 1 1 - - /* IDSEL 0x15 (Slot 4) */ - 0a800 0 0 1 &mpic 3 1 - 0a800 0 0 2 &mpic 0 1 - 0a800 0 0 3 &mpic 1 1 - 0a800 0 0 4 &mpic 2 1 - - /* Bus 1 (Tundra Bridge) */ - /* IDSEL 0x12 (ISA bridge) */ - 19000 0 0 1 &mpic 0 1 - 19000 0 0 2 &mpic 1 1 - 19000 0 0 3 &mpic 2 1 - 19000 0 0 4 &mpic 3 1>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - bus-range = <0 0>; - ranges = <02000000 0 80000000 80000000 0 20000000 - 01000000 0 00000000 e2000000 0 00100000>; - clock-frequency = <3f940aa>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <8000 1000>; - compatible = "fsl,mpc8540-pci"; - device_type = "pci"; - - i8259@19000 { - clock-frequency = <0>; + mpic: pic@40000 { + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + + cpm@919c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8541-cpm", "fsl,cpm2"; + reg = <919c0 30>; + ranges; + + muram@80000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 80000 10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0 2000 9000 1000>; + }; + }; + + brg@919f0 { + compatible = "fsl,mpc8541-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <919f0 10 915f0 10>; + }; + + cpmpic: pic@90c00 { interrupt-controller; - device_type = "interrupt-controller"; - reg = <19000 0 0 0 1>; #address-cells = <0>; #interrupt-cells = <2>; - built-in; - compatible = "chrp,iic"; - big-endian; - interrupts = <1>; - interrupt-parent = <&pci1>; + interrupts = <2e 2>; + interrupt-parent = <&mpic>; + reg = <90c00 80>; + compatible = "fsl,mpc8541-cpm-pic", "fsl,cpm2-pic"; }; }; + }; - pci@9000 { - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < + pci1: pci@e0008000 { + interrupt-map-mask = <1f800 0 0 7>; + interrupt-map = < - /* IDSEL 0x15 */ - a800 0 0 1 &mpic b 1 - a800 0 0 2 &mpic b 1 - a800 0 0 3 &mpic b 1 - a800 0 0 4 &mpic b 1>; - interrupt-parent = <&mpic>; - interrupts = <19 2>; - bus-range = <0 0>; - ranges = <02000000 0 a0000000 a0000000 0 20000000 - 01000000 0 00000000 e3000000 0 00100000>; - clock-frequency = <3f940aa>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <9000 1000>; - compatible = "fsl,mpc8540-pci"; - device_type = "pci"; - }; + /* IDSEL 0x10 */ + 08000 0 0 1 &mpic 0 1 + 08000 0 0 2 &mpic 1 1 + 08000 0 0 3 &mpic 2 1 + 08000 0 0 4 &mpic 3 1 - mpic: pic@40000 { - clock-frequency = <0>; + /* IDSEL 0x11 */ + 08800 0 0 1 &mpic 0 1 + 08800 0 0 2 &mpic 1 1 + 08800 0 0 3 &mpic 2 1 + 08800 0 0 4 &mpic 3 1 + + /* IDSEL 0x12 (Slot 1) */ + 09000 0 0 1 &mpic 0 1 + 09000 0 0 2 &mpic 1 1 + 09000 0 0 3 &mpic 2 1 + 09000 0 0 4 &mpic 3 1 + + /* IDSEL 0x13 (Slot 2) */ + 09800 0 0 1 &mpic 1 1 + 09800 0 0 2 &mpic 2 1 + 09800 0 0 3 &mpic 3 1 + 09800 0 0 4 &mpic 0 1 + + /* IDSEL 0x14 (Slot 3) */ + 0a000 0 0 1 &mpic 2 1 + 0a000 0 0 2 &mpic 3 1 + 0a000 0 0 3 &mpic 0 1 + 0a000 0 0 4 &mpic 1 1 + + /* IDSEL 0x15 (Slot 4) */ + 0a800 0 0 1 &mpic 3 1 + 0a800 0 0 2 &mpic 0 1 + 0a800 0 0 3 &mpic 1 1 + 0a800 0 0 4 &mpic 2 1 + + /* Bus 1 (Tundra Bridge) */ + /* IDSEL 0x12 (ISA bridge) */ + 19000 0 0 1 &mpic 0 1 + 19000 0 0 2 &mpic 1 1 + 19000 0 0 3 &mpic 2 1 + 19000 0 0 4 &mpic 3 1>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + bus-range = <0 0>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e0008000 1000>; + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + + i8259@19000 { interrupt-controller; + device_type = "interrupt-controller"; + reg = <19000 0 0 0 1>; #address-cells = <0>; #interrupt-cells = <2>; - reg = <40000 40000>; - built-in; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - big-endian; + compatible = "chrp,iic"; + interrupts = <1>; + interrupt-parent = <&pci1>; }; }; + + pci@e0009000 { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x15 */ + a800 0 0 1 &mpic b 1 + a800 0 0 2 &mpic b 1 + a800 0 0 3 &mpic b 1 + a800 0 0 4 &mpic b 1>; + interrupt-parent = <&mpic>; + interrupts = <19 2>; + bus-range = <0 0>; + ranges = <02000000 0 a0000000 a0000000 0 20000000 + 01000000 0 00000000 e3000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e0009000 1000>; + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + }; }; diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts index 3e79bf0a3159..3f9d15cf13e0 100644 --- a/arch/powerpc/boot/dts/mpc8544ds.dts +++ b/arch/powerpc/boot/dts/mpc8544ds.dts @@ -30,7 +30,6 @@ timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; - 32-bit; }; }; @@ -42,19 +41,9 @@ soc8544@e0000000 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "soc"; - - ranges = <00001000 e0001000 000ff000 - 80000000 80000000 20000000 - a0000000 a0000000 10000000 - b0000000 b0000000 00100000 - c0000000 c0000000 20000000 - b0100000 b0100000 00100000 - e1000000 e1000000 00010000 - e1010000 e1010000 00010000 - e1020000 e1020000 00010000>; + ranges = <00000000 e0000000 00100000>; reg = <e0000000 00001000>; // CCSRBAR 1M bus-frequency = <0>; // Filled out by uboot. @@ -149,115 +138,173 @@ interrupt-parent = <&mpic>; }; - pci@8000 { - compatible = "fsl,mpc8540-pci"; - device_type = "pci"; - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < - - /* IDSEL 0x11 J17 Slot 1 */ - 8800 0 0 1 &mpic 2 1 - 8800 0 0 2 &mpic 3 1 - 8800 0 0 3 &mpic 4 1 - 8800 0 0 4 &mpic 1 1 + global-utilities@e0000 { //global utilities block + compatible = "fsl,mpc8548-guts"; + reg = <e0000 1000>; + fsl,has-rstcr; + }; - /* IDSEL 0x12 J16 Slot 2 */ + mpic: pic@40000 { + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + }; - 9000 0 0 1 &mpic 3 1 - 9000 0 0 2 &mpic 4 1 - 9000 0 0 3 &mpic 2 1 - 9000 0 0 4 &mpic 1 1>; + pci@e0008000 { + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x11 J17 Slot 1 */ + 8800 0 0 1 &mpic 2 1 + 8800 0 0 2 &mpic 3 1 + 8800 0 0 3 &mpic 4 1 + 8800 0 0 4 &mpic 1 1 + + /* IDSEL 0x12 J16 Slot 2 */ + + 9000 0 0 1 &mpic 3 1 + 9000 0 0 2 &mpic 4 1 + 9000 0 0 3 &mpic 2 1 + 9000 0 0 4 &mpic 1 1>; + + interrupt-parent = <&mpic>; + interrupts = <18 2>; + bus-range = <0 ff>; + ranges = <02000000 0 c0000000 c0000000 0 20000000 + 01000000 0 00000000 e1000000 0 00010000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e0008000 1000>; + }; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - bus-range = <0 ff>; - ranges = <02000000 0 c0000000 c0000000 0 20000000 - 01000000 0 00000000 e1000000 0 00010000>; - clock-frequency = <3f940aa>; - #interrupt-cells = <1>; + pcie@e0009000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e0009000 1000>; + bus-range = <0 ff>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e1010000 0 00010000>; + clock-frequency = <1fca055>; + interrupt-parent = <&mpic>; + interrupts = <1a 2>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 4 1 + 0000 0 0 2 &mpic 5 1 + 0000 0 0 3 &mpic 6 1 + 0000 0 0 4 &mpic 7 1 + >; + pcie@0 { + reg = <0 0 0 0 0>; #size-cells = <2>; #address-cells = <3>; - reg = <8000 1000>; - }; - - pcie@9000 { - compatible = "fsl,mpc8548-pcie"; device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <9000 1000>; - bus-range = <0 ff>; - ranges = <02000000 0 80000000 80000000 0 20000000 - 01000000 0 00000000 e1010000 0 00010000>; - clock-frequency = <1fca055>; - interrupt-parent = <&mpic>; - interrupts = <1a 2>; - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 4 1 - 0000 0 0 2 &mpic 5 1 - 0000 0 0 3 &mpic 6 1 - 0000 0 0 4 &mpic 7 1 - >; + ranges = <02000000 0 80000000 + 02000000 0 80000000 + 0 20000000 + + 01000000 0 00000000 + 01000000 0 00000000 + 0 00010000>; }; + }; - pcie@a000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; + pcie@e000a000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e000a000 1000>; + bus-range = <0 ff>; + ranges = <02000000 0 a0000000 a0000000 0 10000000 + 01000000 0 00000000 e1020000 0 00010000>; + clock-frequency = <1fca055>; + interrupt-parent = <&mpic>; + interrupts = <19 2>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 0 1 + 0000 0 0 2 &mpic 1 1 + 0000 0 0 3 &mpic 2 1 + 0000 0 0 4 &mpic 3 1 + >; + pcie@0 { + reg = <0 0 0 0 0>; #size-cells = <2>; #address-cells = <3>; - reg = <a000 1000>; - bus-range = <0 ff>; - ranges = <02000000 0 a0000000 a0000000 0 10000000 - 01000000 0 00000000 e1020000 0 00010000>; - clock-frequency = <1fca055>; - interrupt-parent = <&mpic>; - interrupts = <19 2>; - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 0 1 - 0000 0 0 2 &mpic 1 1 - 0000 0 0 3 &mpic 2 1 - 0000 0 0 4 &mpic 3 1 - >; + device_type = "pci"; + ranges = <02000000 0 a0000000 + 02000000 0 a0000000 + 0 10000000 + + 01000000 0 00000000 + 01000000 0 00000000 + 0 00010000>; }; + }; - pcie@b000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; + pcie@e000b000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e000b000 1000>; + bus-range = <0 ff>; + ranges = <02000000 0 b0000000 b0000000 0 00100000 + 01000000 0 00000000 b0100000 0 00100000>; + clock-frequency = <1fca055>; + interrupt-parent = <&mpic>; + interrupts = <1b 2>; + interrupt-map-mask = <fb00 0 0 0>; + interrupt-map = < + // IDSEL 0x1c USB + e000 0 0 0 &i8259 c 2 + e100 0 0 0 &i8259 9 2 + e200 0 0 0 &i8259 a 2 + e300 0 0 0 &i8259 b 2 + + // IDSEL 0x1d Audio + e800 0 0 0 &i8259 6 2 + + // IDSEL 0x1e Legacy + f000 0 0 0 &i8259 7 2 + f100 0 0 0 &i8259 7 2 + + // IDSEL 0x1f IDE/SATA + f800 0 0 0 &i8259 e 2 + f900 0 0 0 &i8259 5 2 + >; + + pcie@0 { + reg = <0 0 0 0 0>; #size-cells = <2>; #address-cells = <3>; - reg = <b000 1000>; - bus-range = <0 ff>; - ranges = <02000000 0 b0000000 b0000000 0 00100000 - 01000000 0 00000000 b0100000 0 00100000>; - clock-frequency = <1fca055>; - interrupt-parent = <&mpic>; - interrupts = <1b 2>; - interrupt-map-mask = <fb00 0 0 0>; - interrupt-map = < - // IDSEL 0x1c USB - e000 0 0 0 &i8259 c 2 - e100 0 0 0 &i8259 9 2 - e200 0 0 0 &i8259 a 2 - e300 0 0 0 &i8259 b 2 - - // IDSEL 0x1d Audio - e800 0 0 0 &i8259 6 2 - - // IDSEL 0x1e Legacy - f000 0 0 0 &i8259 7 2 - f100 0 0 0 &i8259 7 2 - - // IDSEL 0x1f IDE/SATA - f800 0 0 0 &i8259 e 2 - f900 0 0 0 &i8259 5 2 - >; + device_type = "pci"; + ranges = <02000000 0 b0000000 + 02000000 0 b0000000 + 0 00100000 + + 01000000 0 00000000 + 01000000 0 00000000 + 0 00100000>; + uli1575@0 { reg = <0 0 0 0 0>; #size-cells = <2>; @@ -265,95 +312,63 @@ ranges = <02000000 0 b0000000 02000000 0 b0000000 0 00100000 + 01000000 0 00000000 01000000 0 00000000 0 00100000>; - - pci_bridge@0 { - reg = <0 0 0 0 0>; - #size-cells = <2>; - #address-cells = <3>; - ranges = <02000000 0 b0000000 - 02000000 0 b0000000 - 0 00100000 - 01000000 0 00000000 - 01000000 0 00000000 - 0 00100000>; - - isa@1e { - device_type = "isa"; + isa@1e { + device_type = "isa"; + #interrupt-cells = <2>; + #size-cells = <1>; + #address-cells = <2>; + reg = <f000 0 0 0 0>; + ranges = <1 0 + 01000000 0 0 + 00001000>; + interrupt-parent = <&i8259>; + + i8259: interrupt-controller@20 { + reg = <1 20 2 + 1 a0 2 + 1 4d0 2>; + interrupt-controller; + device_type = "interrupt-controller"; + #address-cells = <0>; #interrupt-cells = <2>; - #size-cells = <1>; - #address-cells = <2>; - reg = <f000 0 0 0 0>; - ranges = <1 0 - 01000000 0 0 - 00001000>; + compatible = "chrp,iic"; + interrupts = <9 2>; + interrupt-parent = <&mpic>; + }; + + i8042@60 { + #size-cells = <0>; + #address-cells = <1>; + reg = <1 60 1 1 64 1>; + interrupts = <1 3 c 3>; interrupt-parent = <&i8259>; - i8259: interrupt-controller@20 { - reg = <1 20 2 - 1 a0 2 - 1 4d0 2>; - clock-frequency = <0>; - interrupt-controller; - device_type = "interrupt-controller"; - #address-cells = <0>; - #interrupt-cells = <2>; - built-in; - compatible = "chrp,iic"; - interrupts = <9 2>; - interrupt-parent = <&mpic>; + keyboard@0 { + reg = <0>; + compatible = "pnpPNP,303"; }; - i8042@60 { - #size-cells = <0>; - #address-cells = <1>; - reg = <1 60 1 1 64 1>; - interrupts = <1 3 c 3>; - interrupt-parent = <&i8259>; - - keyboard@0 { - reg = <0>; - compatible = "pnpPNP,303"; - }; - - mouse@1 { - reg = <1>; - compatible = "pnpPNP,f03"; - }; + mouse@1 { + reg = <1>; + compatible = "pnpPNP,f03"; }; + }; - rtc@70 { - compatible = "pnpPNP,b00"; - reg = <1 70 2>; - }; + rtc@70 { + compatible = "pnpPNP,b00"; + reg = <1 70 2>; + }; - gpio@400 { - reg = <1 400 80>; - }; + gpio@400 { + reg = <1 400 80>; }; }; }; - }; - global-utilities@e0000 { //global utilities block - compatible = "fsl,mpc8548-guts"; - reg = <e0000 1000>; - fsl,has-rstcr; - }; - - mpic: pic@40000 { - clock-frequency = <0>; - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <40000 40000>; - built-in; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - big-endian; - }; }; }; diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts index d215d21fff42..69ca5025d972 100644 --- a/arch/powerpc/boot/dts/mpc8548cds.dts +++ b/arch/powerpc/boot/dts/mpc8548cds.dts @@ -30,7 +30,6 @@ timebase-frequency = <0>; // 33 MHz, from uboot bus-frequency = <0>; // 166 MHz clock-frequency = <0>; // 825 MHz, from uboot - 32-bit; }; }; @@ -42,15 +41,8 @@ soc8548@e0000000 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "soc"; - ranges = <00001000 e0001000 000ff000 - 80000000 80000000 10000000 - e2000000 e2000000 00800000 - 90000000 90000000 10000000 - e2800000 e2800000 00800000 - a0000000 a0000000 20000000 - e3000000 e3000000 01000000>; + ranges = <00000000 e0000000 00100000>; reg = <e0000000 00001000>; // CCSRBAR bus-frequency = <0>; @@ -189,215 +181,225 @@ fsl,has-rstcr; }; - pci@8000 { + mpic: pic@40000 { + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + }; + + pci@e0008000 { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 0x4 (PCIX Slot 2) */ + 02000 0 0 1 &mpic 0 1 + 02000 0 0 2 &mpic 1 1 + 02000 0 0 3 &mpic 2 1 + 02000 0 0 4 &mpic 3 1 + + /* IDSEL 0x5 (PCIX Slot 3) */ + 02800 0 0 1 &mpic 1 1 + 02800 0 0 2 &mpic 2 1 + 02800 0 0 3 &mpic 3 1 + 02800 0 0 4 &mpic 0 1 + + /* IDSEL 0x6 (PCIX Slot 4) */ + 03000 0 0 1 &mpic 2 1 + 03000 0 0 2 &mpic 3 1 + 03000 0 0 3 &mpic 0 1 + 03000 0 0 4 &mpic 1 1 + + /* IDSEL 0x8 (PCIX Slot 5) */ + 04000 0 0 1 &mpic 0 1 + 04000 0 0 2 &mpic 1 1 + 04000 0 0 3 &mpic 2 1 + 04000 0 0 4 &mpic 3 1 + + /* IDSEL 0xC (Tsi310 bridge) */ + 06000 0 0 1 &mpic 0 1 + 06000 0 0 2 &mpic 1 1 + 06000 0 0 3 &mpic 2 1 + 06000 0 0 4 &mpic 3 1 + + /* IDSEL 0x14 (Slot 2) */ + 0a000 0 0 1 &mpic 0 1 + 0a000 0 0 2 &mpic 1 1 + 0a000 0 0 3 &mpic 2 1 + 0a000 0 0 4 &mpic 3 1 + + /* IDSEL 0x15 (Slot 3) */ + 0a800 0 0 1 &mpic 1 1 + 0a800 0 0 2 &mpic 2 1 + 0a800 0 0 3 &mpic 3 1 + 0a800 0 0 4 &mpic 0 1 + + /* IDSEL 0x16 (Slot 4) */ + 0b000 0 0 1 &mpic 2 1 + 0b000 0 0 2 &mpic 3 1 + 0b000 0 0 3 &mpic 0 1 + 0b000 0 0 4 &mpic 1 1 + + /* IDSEL 0x18 (Slot 5) */ + 0c000 0 0 1 &mpic 0 1 + 0c000 0 0 2 &mpic 1 1 + 0c000 0 0 3 &mpic 2 1 + 0c000 0 0 4 &mpic 3 1 + + /* IDSEL 0x1C (Tsi310 bridge PCI primary) */ + 0E000 0 0 1 &mpic 0 1 + 0E000 0 0 2 &mpic 1 1 + 0E000 0 0 3 &mpic 2 1 + 0E000 0 0 4 &mpic 3 1>; + + interrupt-parent = <&mpic>; + interrupts = <18 2>; + bus-range = <0 0>; + ranges = <02000000 0 80000000 80000000 0 10000000 + 01000000 0 00000000 e2000000 0 00800000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e0008000 1000>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + + pci_bridge@1c { interrupt-map-mask = <f800 0 0 7>; interrupt-map = < - /* IDSEL 0x4 (PCIX Slot 2) */ - 02000 0 0 1 &mpic 0 1 - 02000 0 0 2 &mpic 1 1 - 02000 0 0 3 &mpic 2 1 - 02000 0 0 4 &mpic 3 1 - - /* IDSEL 0x5 (PCIX Slot 3) */ - 02800 0 0 1 &mpic 1 1 - 02800 0 0 2 &mpic 2 1 - 02800 0 0 3 &mpic 3 1 - 02800 0 0 4 &mpic 0 1 - - /* IDSEL 0x6 (PCIX Slot 4) */ - 03000 0 0 1 &mpic 2 1 - 03000 0 0 2 &mpic 3 1 - 03000 0 0 3 &mpic 0 1 - 03000 0 0 4 &mpic 1 1 - - /* IDSEL 0x8 (PCIX Slot 5) */ - 04000 0 0 1 &mpic 0 1 - 04000 0 0 2 &mpic 1 1 - 04000 0 0 3 &mpic 2 1 - 04000 0 0 4 &mpic 3 1 - - /* IDSEL 0xC (Tsi310 bridge) */ - 06000 0 0 1 &mpic 0 1 - 06000 0 0 2 &mpic 1 1 - 06000 0 0 3 &mpic 2 1 - 06000 0 0 4 &mpic 3 1 - - /* IDSEL 0x14 (Slot 2) */ - 0a000 0 0 1 &mpic 0 1 - 0a000 0 0 2 &mpic 1 1 - 0a000 0 0 3 &mpic 2 1 - 0a000 0 0 4 &mpic 3 1 - - /* IDSEL 0x15 (Slot 3) */ - 0a800 0 0 1 &mpic 1 1 - 0a800 0 0 2 &mpic 2 1 - 0a800 0 0 3 &mpic 3 1 - 0a800 0 0 4 &mpic 0 1 - - /* IDSEL 0x16 (Slot 4) */ - 0b000 0 0 1 &mpic 2 1 - 0b000 0 0 2 &mpic 3 1 - 0b000 0 0 3 &mpic 0 1 - 0b000 0 0 4 &mpic 1 1 - - /* IDSEL 0x18 (Slot 5) */ - 0c000 0 0 1 &mpic 0 1 - 0c000 0 0 2 &mpic 1 1 - 0c000 0 0 3 &mpic 2 1 - 0c000 0 0 4 &mpic 3 1 - - /* IDSEL 0x1C (Tsi310 bridge PCI primary) */ - 0E000 0 0 1 &mpic 0 1 - 0E000 0 0 2 &mpic 1 1 - 0E000 0 0 3 &mpic 2 1 - 0E000 0 0 4 &mpic 3 1>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - bus-range = <0 0>; - ranges = <02000000 0 80000000 80000000 0 10000000 - 01000000 0 00000000 e2000000 0 00800000>; - clock-frequency = <3f940aa>; + /* IDSEL 0x00 (PrPMC Site) */ + 0000 0 0 1 &mpic 0 1 + 0000 0 0 2 &mpic 1 1 + 0000 0 0 3 &mpic 2 1 + 0000 0 0 4 &mpic 3 1 + + /* IDSEL 0x04 (VIA chip) */ + 2000 0 0 1 &mpic 0 1 + 2000 0 0 2 &mpic 1 1 + 2000 0 0 3 &mpic 2 1 + 2000 0 0 4 &mpic 3 1 + + /* IDSEL 0x05 (8139) */ + 2800 0 0 1 &mpic 1 1 + + /* IDSEL 0x06 (Slot 6) */ + 3000 0 0 1 &mpic 2 1 + 3000 0 0 2 &mpic 3 1 + 3000 0 0 3 &mpic 0 1 + 3000 0 0 4 &mpic 1 1 + + /* IDESL 0x07 (Slot 7) */ + 3800 0 0 1 &mpic 3 1 + 3800 0 0 2 &mpic 0 1 + 3800 0 0 3 &mpic 1 1 + 3800 0 0 4 &mpic 2 1>; + + reg = <e000 0 0 0 0>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <8000 1000>; - compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; - device_type = "pci"; + ranges = <02000000 0 80000000 + 02000000 0 80000000 + 0 20000000 + 01000000 0 00000000 + 01000000 0 00000000 + 0 00080000>; + clock-frequency = <1fca055>; - pci_bridge@1c { - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < - - /* IDSEL 0x00 (PrPMC Site) */ - 0000 0 0 1 &mpic 0 1 - 0000 0 0 2 &mpic 1 1 - 0000 0 0 3 &mpic 2 1 - 0000 0 0 4 &mpic 3 1 - - /* IDSEL 0x04 (VIA chip) */ - 2000 0 0 1 &mpic 0 1 - 2000 0 0 2 &mpic 1 1 - 2000 0 0 3 &mpic 2 1 - 2000 0 0 4 &mpic 3 1 - - /* IDSEL 0x05 (8139) */ - 2800 0 0 1 &mpic 1 1 - - /* IDSEL 0x06 (Slot 6) */ - 3000 0 0 1 &mpic 2 1 - 3000 0 0 2 &mpic 3 1 - 3000 0 0 3 &mpic 0 1 - 3000 0 0 4 &mpic 1 1 - - /* IDESL 0x07 (Slot 7) */ - 3800 0 0 1 &mpic 3 1 - 3800 0 0 2 &mpic 0 1 - 3800 0 0 3 &mpic 1 1 - 3800 0 0 4 &mpic 2 1>; - - reg = <e000 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - ranges = <02000000 0 80000000 - 02000000 0 80000000 - 0 20000000 - 01000000 0 00000000 - 01000000 0 00000000 - 0 00080000>; - clock-frequency = <1fca055>; - - isa@4 { - device_type = "isa"; + isa@4 { + device_type = "isa"; + #interrupt-cells = <2>; + #size-cells = <1>; + #address-cells = <2>; + reg = <2000 0 0 0 0>; + ranges = <1 0 01000000 0 0 00001000>; + interrupt-parent = <&i8259>; + + i8259: interrupt-controller@20 { + interrupt-controller; + device_type = "interrupt-controller"; + reg = <1 20 2 + 1 a0 2 + 1 4d0 2>; + #address-cells = <0>; #interrupt-cells = <2>; - #size-cells = <1>; - #address-cells = <2>; - reg = <2000 0 0 0 0>; - ranges = <1 0 01000000 0 0 00001000>; - interrupt-parent = <&i8259>; - - i8259: interrupt-controller@20 { - clock-frequency = <0>; - interrupt-controller; - device_type = "interrupt-controller"; - reg = <1 20 2 - 1 a0 2 - 1 4d0 2>; - #address-cells = <0>; - #interrupt-cells = <2>; - built-in; - compatible = "chrp,iic"; - interrupts = <0 1>; - interrupt-parent = <&mpic>; - }; - - rtc@70 { - compatible = "pnpPNP,b00"; - reg = <1 70 2>; - }; + compatible = "chrp,iic"; + interrupts = <0 1>; + interrupt-parent = <&mpic>; }; - }; - }; - pci@9000 { - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < - - /* IDSEL 0x15 */ - a800 0 0 1 &mpic b 1 - a800 0 0 2 &mpic 1 1 - a800 0 0 3 &mpic 2 1 - a800 0 0 4 &mpic 3 1>; - - interrupt-parent = <&mpic>; - interrupts = <19 2>; - bus-range = <0 0>; - ranges = <02000000 0 90000000 90000000 0 10000000 - 01000000 0 00000000 e2800000 0 00800000>; - clock-frequency = <3f940aa>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <9000 1000>; - compatible = "fsl,mpc8540-pci"; - device_type = "pci"; + rtc@70 { + compatible = "pnpPNP,b00"; + reg = <1 70 2>; + }; + }; }; - /* PCI Express */ - pcie@a000 { - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < + }; - /* IDSEL 0x0 (PEX) */ - 00000 0 0 1 &mpic 0 1 - 00000 0 0 2 &mpic 1 1 - 00000 0 0 3 &mpic 2 1 - 00000 0 0 4 &mpic 3 1>; + pci@e0009000 { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x15 */ + a800 0 0 1 &mpic b 1 + a800 0 0 2 &mpic 1 1 + a800 0 0 3 &mpic 2 1 + a800 0 0 4 &mpic 3 1>; + + interrupt-parent = <&mpic>; + interrupts = <19 2>; + bus-range = <0 0>; + ranges = <02000000 0 90000000 90000000 0 10000000 + 01000000 0 00000000 e2800000 0 00800000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e0009000 1000>; + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + }; - interrupt-parent = <&mpic>; - interrupts = <1a 2>; - bus-range = <0 ff>; - ranges = <02000000 0 a0000000 a0000000 0 20000000 - 01000000 0 00000000 e3000000 0 08000000>; - clock-frequency = <1fca055>; - #interrupt-cells = <1>; + pcie@e000a000 { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x0 (PEX) */ + 00000 0 0 1 &mpic 0 1 + 00000 0 0 2 &mpic 1 1 + 00000 0 0 3 &mpic 2 1 + 00000 0 0 4 &mpic 3 1>; + + interrupt-parent = <&mpic>; + interrupts = <1a 2>; + bus-range = <0 ff>; + ranges = <02000000 0 a0000000 a0000000 0 20000000 + 01000000 0 00000000 e3000000 0 08000000>; + clock-frequency = <1fca055>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e000a000 1000>; + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + pcie@0 { + reg = <0 0 0 0 0>; #size-cells = <2>; #address-cells = <3>; - reg = <a000 1000>; - compatible = "fsl,mpc8548-pcie"; device_type = "pci"; - }; + ranges = <02000000 0 a0000000 + 02000000 0 a0000000 + 0 20000000 - mpic: pic@40000 { - clock-frequency = <0>; - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <40000 40000>; - built-in; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - big-endian; + 01000000 0 00000000 + 01000000 0 00000000 + 0 08000000>; }; }; }; diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts index c3c888252121..57029cca32b2 100644 --- a/arch/powerpc/boot/dts/mpc8555cds.dts +++ b/arch/powerpc/boot/dts/mpc8555cds.dts @@ -30,7 +30,6 @@ timebase-frequency = <0>; // 33 MHz, from uboot bus-frequency = <0>; // 166 MHz clock-frequency = <0>; // 825 MHz, from uboot - 32-bit; }; }; @@ -42,10 +41,9 @@ soc8555@e0000000 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "soc"; ranges = <0 e0000000 00100000>; - reg = <e0000000 00100000>; // CCSRBAR 1M + reg = <e0000000 00001000>; // CCSRBAR 1M bus-frequency = <0>; memory-controller@2000 { @@ -137,113 +135,145 @@ interrupt-parent = <&mpic>; }; - pci1: pci@8000 { - interrupt-map-mask = <1f800 0 0 7>; - interrupt-map = < - - /* IDSEL 0x10 */ - 08000 0 0 1 &mpic 0 1 - 08000 0 0 2 &mpic 1 1 - 08000 0 0 3 &mpic 2 1 - 08000 0 0 4 &mpic 3 1 - - /* IDSEL 0x11 */ - 08800 0 0 1 &mpic 0 1 - 08800 0 0 2 &mpic 1 1 - 08800 0 0 3 &mpic 2 1 - 08800 0 0 4 &mpic 3 1 - - /* IDSEL 0x12 (Slot 1) */ - 09000 0 0 1 &mpic 0 1 - 09000 0 0 2 &mpic 1 1 - 09000 0 0 3 &mpic 2 1 - 09000 0 0 4 &mpic 3 1 - - /* IDSEL 0x13 (Slot 2) */ - 09800 0 0 1 &mpic 1 1 - 09800 0 0 2 &mpic 2 1 - 09800 0 0 3 &mpic 3 1 - 09800 0 0 4 &mpic 0 1 - - /* IDSEL 0x14 (Slot 3) */ - 0a000 0 0 1 &mpic 2 1 - 0a000 0 0 2 &mpic 3 1 - 0a000 0 0 3 &mpic 0 1 - 0a000 0 0 4 &mpic 1 1 - - /* IDSEL 0x15 (Slot 4) */ - 0a800 0 0 1 &mpic 3 1 - 0a800 0 0 2 &mpic 0 1 - 0a800 0 0 3 &mpic 1 1 - 0a800 0 0 4 &mpic 2 1 - - /* Bus 1 (Tundra Bridge) */ - /* IDSEL 0x12 (ISA bridge) */ - 19000 0 0 1 &mpic 0 1 - 19000 0 0 2 &mpic 1 1 - 19000 0 0 3 &mpic 2 1 - 19000 0 0 4 &mpic 3 1>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - bus-range = <0 0>; - ranges = <02000000 0 80000000 80000000 0 20000000 - 01000000 0 00000000 e2000000 0 00100000>; - clock-frequency = <3f940aa>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <8000 1000>; - compatible = "fsl,mpc8540-pci"; - device_type = "pci"; - - i8259@19000 { - clock-frequency = <0>; + mpic: pic@40000 { + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + + cpm@919c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8555-cpm", "fsl,cpm2"; + reg = <919c0 30>; + ranges; + + muram@80000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 80000 10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0 2000 9000 1000>; + }; + }; + + brg@919f0 { + compatible = "fsl,mpc8555-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <919f0 10 915f0 10>; + }; + + cpmpic: pic@90c00 { interrupt-controller; - device_type = "interrupt-controller"; - reg = <19000 0 0 0 1>; #address-cells = <0>; #interrupt-cells = <2>; - built-in; - compatible = "chrp,iic"; - big-endian; - interrupts = <1>; - interrupt-parent = <&pci1>; + interrupts = <2e 2>; + interrupt-parent = <&mpic>; + reg = <90c00 80>; + compatible = "fsl,mpc8555-cpm-pic", "fsl,cpm2-pic"; }; }; + }; - pci@9000 { - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < + pci1: pci@e0008000 { + interrupt-map-mask = <1f800 0 0 7>; + interrupt-map = < - /* IDSEL 0x15 */ - a800 0 0 1 &mpic b 1 - a800 0 0 2 &mpic b 1 - a800 0 0 3 &mpic b 1 - a800 0 0 4 &mpic b 1>; - interrupt-parent = <&mpic>; - interrupts = <19 2>; - bus-range = <0 0>; - ranges = <02000000 0 a0000000 a0000000 0 20000000 - 01000000 0 00000000 e3000000 0 00100000>; - clock-frequency = <3f940aa>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <9000 1000>; - compatible = "fsl,mpc8540-pci"; - device_type = "pci"; - }; + /* IDSEL 0x10 */ + 08000 0 0 1 &mpic 0 1 + 08000 0 0 2 &mpic 1 1 + 08000 0 0 3 &mpic 2 1 + 08000 0 0 4 &mpic 3 1 - mpic: pic@40000 { - clock-frequency = <0>; + /* IDSEL 0x11 */ + 08800 0 0 1 &mpic 0 1 + 08800 0 0 2 &mpic 1 1 + 08800 0 0 3 &mpic 2 1 + 08800 0 0 4 &mpic 3 1 + + /* IDSEL 0x12 (Slot 1) */ + 09000 0 0 1 &mpic 0 1 + 09000 0 0 2 &mpic 1 1 + 09000 0 0 3 &mpic 2 1 + 09000 0 0 4 &mpic 3 1 + + /* IDSEL 0x13 (Slot 2) */ + 09800 0 0 1 &mpic 1 1 + 09800 0 0 2 &mpic 2 1 + 09800 0 0 3 &mpic 3 1 + 09800 0 0 4 &mpic 0 1 + + /* IDSEL 0x14 (Slot 3) */ + 0a000 0 0 1 &mpic 2 1 + 0a000 0 0 2 &mpic 3 1 + 0a000 0 0 3 &mpic 0 1 + 0a000 0 0 4 &mpic 1 1 + + /* IDSEL 0x15 (Slot 4) */ + 0a800 0 0 1 &mpic 3 1 + 0a800 0 0 2 &mpic 0 1 + 0a800 0 0 3 &mpic 1 1 + 0a800 0 0 4 &mpic 2 1 + + /* Bus 1 (Tundra Bridge) */ + /* IDSEL 0x12 (ISA bridge) */ + 19000 0 0 1 &mpic 0 1 + 19000 0 0 2 &mpic 1 1 + 19000 0 0 3 &mpic 2 1 + 19000 0 0 4 &mpic 3 1>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + bus-range = <0 0>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e0008000 1000>; + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + + i8259@19000 { interrupt-controller; + device_type = "interrupt-controller"; + reg = <19000 0 0 0 1>; #address-cells = <0>; #interrupt-cells = <2>; - reg = <40000 40000>; - built-in; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - big-endian; + compatible = "chrp,iic"; + interrupts = <1>; + interrupt-parent = <&pci1>; }; }; + + pci@e0009000 { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x15 */ + a800 0 0 1 &mpic b 1 + a800 0 0 2 &mpic b 1 + a800 0 0 3 &mpic b 1 + a800 0 0 4 &mpic b 1>; + interrupt-parent = <&mpic>; + interrupts = <19 2>; + bus-range = <0 0>; + ranges = <02000000 0 a0000000 a0000000 0 20000000 + 01000000 0 00000000 e3000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e0009000 1000>; + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + }; }; diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts index 16dbe848cecf..6b362f8222c1 100644 --- a/arch/powerpc/boot/dts/mpc8560ads.dts +++ b/arch/powerpc/boot/dts/mpc8560ads.dts @@ -30,7 +30,6 @@ timebase-frequency = <04ead9a0>; bus-frequency = <13ab6680>; clock-frequency = <312c8040>; - 32-bit; }; }; @@ -42,7 +41,6 @@ soc8560@e0000000 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "soc"; ranges = <0 e0000000 00100000>; reg = <e0000000 00000200>; @@ -132,115 +130,39 @@ phy-handle = <&phy1>; }; - pci@8000 { - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; - device_type = "pci"; - reg = <8000 1000>; - clock-frequency = <3f940aa>; - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < - - /* IDSEL 0x2 */ - 1000 0 0 1 &mpic 1 1 - 1000 0 0 2 &mpic 2 1 - 1000 0 0 3 &mpic 3 1 - 1000 0 0 4 &mpic 4 1 - - /* IDSEL 0x3 */ - 1800 0 0 1 &mpic 4 1 - 1800 0 0 2 &mpic 1 1 - 1800 0 0 3 &mpic 2 1 - 1800 0 0 4 &mpic 3 1 - - /* IDSEL 0x4 */ - 2000 0 0 1 &mpic 3 1 - 2000 0 0 2 &mpic 4 1 - 2000 0 0 3 &mpic 1 1 - 2000 0 0 4 &mpic 2 1 - - /* IDSEL 0x5 */ - 2800 0 0 1 &mpic 2 1 - 2800 0 0 2 &mpic 3 1 - 2800 0 0 3 &mpic 4 1 - 2800 0 0 4 &mpic 1 1 - - /* IDSEL 12 */ - 6000 0 0 1 &mpic 1 1 - 6000 0 0 2 &mpic 2 1 - 6000 0 0 3 &mpic 3 1 - 6000 0 0 4 &mpic 4 1 - - /* IDSEL 13 */ - 6800 0 0 1 &mpic 4 1 - 6800 0 0 2 &mpic 1 1 - 6800 0 0 3 &mpic 2 1 - 6800 0 0 4 &mpic 3 1 - - /* IDSEL 14*/ - 7000 0 0 1 &mpic 3 1 - 7000 0 0 2 &mpic 4 1 - 7000 0 0 3 &mpic 1 1 - 7000 0 0 4 &mpic 2 1 - - /* IDSEL 15 */ - 7800 0 0 1 &mpic 2 1 - 7800 0 0 2 &mpic 3 1 - 7800 0 0 3 &mpic 4 1 - 7800 0 0 4 &mpic 1 1 - - /* IDSEL 18 */ - 9000 0 0 1 &mpic 1 1 - 9000 0 0 2 &mpic 2 1 - 9000 0 0 3 &mpic 3 1 - 9000 0 0 4 &mpic 4 1 - - /* IDSEL 19 */ - 9800 0 0 1 &mpic 4 1 - 9800 0 0 2 &mpic 1 1 - 9800 0 0 3 &mpic 2 1 - 9800 0 0 4 &mpic 3 1 - - /* IDSEL 20 */ - a000 0 0 1 &mpic 3 1 - a000 0 0 2 &mpic 4 1 - a000 0 0 3 &mpic 1 1 - a000 0 0 4 &mpic 2 1 - - /* IDSEL 21 */ - a800 0 0 1 &mpic 2 1 - a800 0 0 2 &mpic 3 1 - a800 0 0 3 &mpic 4 1 - a800 0 0 4 &mpic 1 1>; - - interrupt-parent = <&mpic>; - interrupts = <18 2>; - bus-range = <0 0>; - ranges = <02000000 0 80000000 80000000 0 20000000 - 01000000 0 00000000 e2000000 0 01000000>; - }; - mpic: pic@40000 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; reg = <40000 40000>; - built-in; device_type = "open-pic"; }; - cpm@e0000000 { + cpm@919c0 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; - device_type = "cpm"; - model = "CPM2"; - ranges = <0 0 c0000>; - reg = <80000 40000>; - command-proc = <919c0>; - brg-frequency = <9d5b340>; + compatible = "fsl,mpc8560-cpm", "fsl,cpm2"; + reg = <919c0 30>; + ranges; + + muram@80000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 80000 10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0 4000 9000 2000>; + }; + }; + + brg@919f0 { + compatible = "fsl,mpc8560-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <919f0 10 915f0 10>; + clock-frequency = <d#165000000>; + }; cpmpic: pic@90c00 { interrupt-controller; @@ -249,44 +171,38 @@ interrupts = <2e 2>; interrupt-parent = <&mpic>; reg = <90c00 80>; - built-in; - device_type = "cpm-pic"; + compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic"; }; - scc@91a00 { + serial@91a00 { device_type = "serial"; - compatible = "cpm_uart"; - model = "SCC"; - device-id = <1>; + compatible = "fsl,mpc8560-scc-uart", + "fsl,cpm2-scc-uart"; reg = <91a00 20 88000 100>; - clock-setup = <00ffffff 0>; - rx-clock = <1>; - tx-clock = <1>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <00800000>; current-speed = <1c200>; interrupts = <28 8>; interrupt-parent = <&cpmpic>; }; - scc@91a20 { + serial@91a20 { device_type = "serial"; - compatible = "cpm_uart"; - model = "SCC"; - device-id = <2>; + compatible = "fsl,mpc8560-scc-uart", + "fsl,cpm2-scc-uart"; reg = <91a20 20 88100 100>; - clock-setup = <ff00ffff 90000>; - rx-clock = <2>; - tx-clock = <2>; + fsl,cpm-brg = <2>; + fsl,cpm-command = <04a00000>; current-speed = <1c200>; interrupts = <29 8>; interrupt-parent = <&cpmpic>; }; - fcc@91320 { + ethernet@91320 { device_type = "network"; - compatible = "fs_enet"; - model = "FCC"; - device-id = <2>; - reg = <91320 20 88500 100 913a0 30>; + compatible = "fsl,mpc8560-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <91320 20 88500 100 913b0 1>; /* * mac-address is deprecated and will be removed * in 2.6.25. Only recent versions of @@ -294,20 +210,17 @@ */ mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; - clock-setup = <ff00ffff 250000>; - rx-clock = <15>; - tx-clock = <16>; + fsl,cpm-command = <16200300>; interrupts = <21 8>; interrupt-parent = <&cpmpic>; phy-handle = <&phy2>; }; - fcc@91340 { + ethernet@91340 { device_type = "network"; - compatible = "fs_enet"; - model = "FCC"; - device-id = <3>; - reg = <91340 20 88600 100 913d0 30>; + compatible = "fsl,mpc8560-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <91340 20 88600 100 913d0 1>; /* * mac-address is deprecated and will be removed * in 2.6.25. Only recent versions of @@ -315,13 +228,101 @@ */ mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; - clock-setup = <ffff00ff 3700>; - rx-clock = <17>; - tx-clock = <18>; + fsl,cpm-command = <1a400300>; interrupts = <22 8>; interrupt-parent = <&cpmpic>; phy-handle = <&phy3>; }; }; }; + + pci@e0008000 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + reg = <e0008000 1000>; + clock-frequency = <3f940aa>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x2 */ + 1000 0 0 1 &mpic 1 1 + 1000 0 0 2 &mpic 2 1 + 1000 0 0 3 &mpic 3 1 + 1000 0 0 4 &mpic 4 1 + + /* IDSEL 0x3 */ + 1800 0 0 1 &mpic 4 1 + 1800 0 0 2 &mpic 1 1 + 1800 0 0 3 &mpic 2 1 + 1800 0 0 4 &mpic 3 1 + + /* IDSEL 0x4 */ + 2000 0 0 1 &mpic 3 1 + 2000 0 0 2 &mpic 4 1 + 2000 0 0 3 &mpic 1 1 + 2000 0 0 4 &mpic 2 1 + + /* IDSEL 0x5 */ + 2800 0 0 1 &mpic 2 1 + 2800 0 0 2 &mpic 3 1 + 2800 0 0 3 &mpic 4 1 + 2800 0 0 4 &mpic 1 1 + + /* IDSEL 12 */ + 6000 0 0 1 &mpic 1 1 + 6000 0 0 2 &mpic 2 1 + 6000 0 0 3 &mpic 3 1 + 6000 0 0 4 &mpic 4 1 + + /* IDSEL 13 */ + 6800 0 0 1 &mpic 4 1 + 6800 0 0 2 &mpic 1 1 + 6800 0 0 3 &mpic 2 1 + 6800 0 0 4 &mpic 3 1 + + /* IDSEL 14*/ + 7000 0 0 1 &mpic 3 1 + 7000 0 0 2 &mpic 4 1 + 7000 0 0 3 &mpic 1 1 + 7000 0 0 4 &mpic 2 1 + + /* IDSEL 15 */ + 7800 0 0 1 &mpic 2 1 + 7800 0 0 2 &mpic 3 1 + 7800 0 0 3 &mpic 4 1 + 7800 0 0 4 &mpic 1 1 + + /* IDSEL 18 */ + 9000 0 0 1 &mpic 1 1 + 9000 0 0 2 &mpic 2 1 + 9000 0 0 3 &mpic 3 1 + 9000 0 0 4 &mpic 4 1 + + /* IDSEL 19 */ + 9800 0 0 1 &mpic 4 1 + 9800 0 0 2 &mpic 1 1 + 9800 0 0 3 &mpic 2 1 + 9800 0 0 4 &mpic 3 1 + + /* IDSEL 20 */ + a000 0 0 1 &mpic 3 1 + a000 0 0 2 &mpic 4 1 + a000 0 0 3 &mpic 1 1 + a000 0 0 4 &mpic 2 1 + + /* IDSEL 21 */ + a800 0 0 1 &mpic 2 1 + a800 0 0 2 &mpic 3 1 + a800 0 0 3 &mpic 4 1 + a800 0 0 4 &mpic 1 1>; + + interrupt-parent = <&mpic>; + interrupts = <18 2>; + bus-range = <0 0>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e2000000 0 01000000>; + }; }; diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts index b1dcfbe8c1f8..54394372b12a 100644 --- a/arch/powerpc/boot/dts/mpc8568mds.dts +++ b/arch/powerpc/boot/dts/mpc8568mds.dts @@ -34,7 +34,6 @@ timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; - 32-bit; }; }; @@ -51,10 +50,9 @@ soc8568@e0000000 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "soc"; ranges = <0 e0000000 00100000>; - reg = <e0000000 00100000>; + reg = <e0000000 00001000>; bus-frequency = <0>; memory-controller@2000 { @@ -74,15 +72,24 @@ }; i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; device_type = "i2c"; compatible = "fsl-i2c"; reg = <3000 100>; interrupts = <2b 2>; interrupt-parent = <&mpic>; dfsrr; + + rtc@68 { + compatible = "dallas,ds1374"; + reg = <68>; + }; }; i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; device_type = "i2c"; compatible = "fsl-i2c"; reg = <3100 100>; @@ -97,10 +104,10 @@ device_type = "mdio"; compatible = "gianfar"; reg = <24520 20>; - phy0: ethernet-phy@0 { + phy0: ethernet-phy@7 { interrupt-parent = <&mpic>; interrupts = <1 1>; - reg = <0>; + reg = <7>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { @@ -176,60 +183,6 @@ fsl,has-rstcr; }; - pci@8000 { - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < - /* IDSEL 0x12 AD18 */ - 9000 0 0 1 &mpic 5 1 - 9000 0 0 2 &mpic 6 1 - 9000 0 0 3 &mpic 7 1 - 9000 0 0 4 &mpic 4 1 - - /* IDSEL 0x13 AD19 */ - 9800 0 0 1 &mpic 6 1 - 9800 0 0 2 &mpic 7 1 - 9800 0 0 3 &mpic 4 1 - 9800 0 0 4 &mpic 5 1>; - - interrupt-parent = <&mpic>; - interrupts = <18 2>; - bus-range = <0 ff>; - ranges = <02000000 0 80000000 80000000 0 20000000 - 01000000 0 00000000 e2000000 0 00800000>; - clock-frequency = <3f940aa>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <8000 1000>; - compatible = "fsl,mpc8540-pci"; - device_type = "pci"; - }; - - /* PCI Express */ - pcie@a000 { - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < - - /* IDSEL 0x0 (PEX) */ - 00000 0 0 1 &mpic 0 1 - 00000 0 0 2 &mpic 1 1 - 00000 0 0 3 &mpic 2 1 - 00000 0 0 4 &mpic 3 1>; - - interrupt-parent = <&mpic>; - interrupts = <1a 2>; - bus-range = <0 ff>; - ranges = <02000000 0 a0000000 a0000000 0 20000000 - 01000000 0 00000000 e3000000 0 08000000>; - clock-frequency = <1fca055>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <a000 1000>; - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - }; - serial@4600 { device_type = "serial"; compatible = "ns16550"; @@ -258,11 +211,11 @@ #address-cells = <0>; #interrupt-cells = <2>; reg = <40000 40000>; - built-in; compatible = "chrp,open-pic"; device_type = "open-pic"; big-endian; }; + par_io@e0100 { reg = <e0100 100>; device_type = "par_io"; @@ -289,12 +242,13 @@ 4 1a 2 0 2 0 /* RxD7 */ 4 0b 1 0 2 0 /* TX_EN */ 4 18 1 0 2 0 /* TX_ER */ - 4 0f 2 0 2 0 /* RX_DV */ + 4 10 2 0 2 0 /* RX_DV */ 4 1e 2 0 2 0 /* RX_ER */ 4 11 2 0 2 0 /* RX_CLK */ 4 13 1 0 2 0 /* GTX_CLK */ 1 1f 2 0 3 0>; /* GTX125 */ }; + pio2: ucc_pin@02 { pio-map = < /* port pin dir open_drain assignment has_irq */ @@ -380,10 +334,10 @@ mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock = <0>; - tx-clock = <19>; - phy-handle = <&qe_phy0>; - phy-connection-type = "gmii"; + tx-clock = <20>; pio-handle = <&pio1>; + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; }; ucc@3000 { @@ -402,10 +356,10 @@ mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock = <0>; - tx-clock = <14>; - phy-handle = <&qe_phy1>; - phy-connection-type = "gmii"; + tx-clock = <20>; pio-handle = <&pio2>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; }; mdio@2120 { @@ -417,10 +371,10 @@ /* These are the same PHYs as on * gianfar's MDIO bus */ - qe_phy0: ethernet-phy@00 { + qe_phy0: ethernet-phy@07 { interrupt-parent = <&mpic>; interrupts = <1 1>; - reg = <0>; + reg = <7>; device_type = "ethernet-phy"; }; qe_phy1: ethernet-phy@01 { @@ -449,11 +403,77 @@ #address-cells = <0>; #interrupt-cells = <1>; reg = <80 80>; - built-in; big-endian; interrupts = <2e 2 2e 2>; //high:30 low:30 interrupt-parent = <&mpic>; }; }; + + pci@e0008000 { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 0x12 AD18 */ + 9000 0 0 1 &mpic 5 1 + 9000 0 0 2 &mpic 6 1 + 9000 0 0 3 &mpic 7 1 + 9000 0 0 4 &mpic 4 1 + + /* IDSEL 0x13 AD19 */ + 9800 0 0 1 &mpic 6 1 + 9800 0 0 2 &mpic 7 1 + 9800 0 0 3 &mpic 4 1 + 9800 0 0 4 &mpic 5 1>; + + interrupt-parent = <&mpic>; + interrupts = <18 2>; + bus-range = <0 ff>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e2000000 0 00800000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e0008000 1000>; + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + }; + + /* PCI Express */ + pcie@e000a000 { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x0 (PEX) */ + 00000 0 0 1 &mpic 0 1 + 00000 0 0 2 &mpic 1 1 + 00000 0 0 3 &mpic 2 1 + 00000 0 0 4 &mpic 3 1>; + + interrupt-parent = <&mpic>; + interrupts = <1a 2>; + bus-range = <0 ff>; + ranges = <02000000 0 a0000000 a0000000 0 10000000 + 01000000 0 00000000 e2800000 0 00800000>; + clock-frequency = <1fca055>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e000a000 1000>; + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <02000000 0 a0000000 + 02000000 0 a0000000 + 0 10000000 + + 01000000 0 00000000 + 01000000 0 00000000 + 0 00800000>; + }; + }; }; diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts new file mode 100644 index 000000000000..d638deec7652 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8572ds.dts @@ -0,0 +1,404 @@ +/* + * MPC8572 DS Device Tree Source + * + * Copyright 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/ { + model = "fsl,MPC8572DS"; + compatible = "fsl,MPC8572DS"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8572@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory { + device_type = "memory"; + reg = <00000000 00000000>; // Filled by U-Boot + }; + + soc8572@ffe00000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <00000000 ffe00000 00100000>; + reg = <ffe00000 00001000>; // CCSRBAR & soc regs, remove once parse code for immrbase fixed + bus-frequency = <0>; // Filled out by uboot. + + memory-controller@2000 { + compatible = "fsl,mpc8572-memory-controller"; + reg = <2000 1000>; + interrupt-parent = <&mpic>; + interrupts = <12 2>; + }; + + memory-controller@6000 { + compatible = "fsl,mpc8572-memory-controller"; + reg = <6000 1000>; + interrupt-parent = <&mpic>; + interrupts = <12 2>; + }; + + l2-cache-controller@20000 { + compatible = "fsl,mpc8572-l2-cache-controller"; + reg = <20000 1000>; + cache-line-size = <20>; // 32 bytes + cache-size = <80000>; // L2, 512K + interrupt-parent = <&mpic>; + interrupts = <10 2>; + }; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = <2b 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + i2c@3100 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3100 100>; + interrupts = <2b 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <a 1>; + reg = <0>; + }; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <a 1>; + reg = <1>; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <a 1>; + reg = <2>; + }; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <a 1>; + reg = <3>; + }; + }; + + ethernet@24000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <1d 2 1e 2 22 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + ethernet@25000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <23 2 24 2 28 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + ethernet@26000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <26000 1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <1f 2 20 2 21 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy2>; + phy-connection-type = "rgmii-id"; + }; + + ethernet@27000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <27000 1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <25 2 26 2 27 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy3>; + phy-connection-type = "rgmii-id"; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; + clock-frequency = <0>; + interrupts = <2a 2>; + interrupt-parent = <&mpic>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; + clock-frequency = <0>; + interrupts = <2a 2>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { //global utilities block + compatible = "fsl,mpc8572-guts"; + reg = <e0000 1000>; + fsl,has-rstcr; + }; + + mpic: pic@40000 { + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + }; + + pcie@ffe08000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <ffe08000 1000>; + bus-range = <0 ff>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 ffc00000 0 00010000>; + clock-frequency = <1fca055>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + interrupt-map-mask = <fb00 0 0 0>; + interrupt-map = < + /* IDSEL 0x11 - PCI slot 1 */ + 8800 0 0 1 &mpic 2 1 + 8800 0 0 2 &mpic 3 1 + 8800 0 0 3 &mpic 4 1 + 8800 0 0 4 &mpic 1 1 + + /* IDSEL 0x12 - PCI slot 2 */ + 9000 0 0 1 &mpic 3 1 + 9000 0 0 2 &mpic 4 1 + 9000 0 0 3 &mpic 1 1 + 9000 0 0 4 &mpic 2 1 + + // IDSEL 0x1c USB + e000 0 0 0 &i8259 c 2 + e100 0 0 0 &i8259 9 2 + e200 0 0 0 &i8259 a 2 + e300 0 0 0 &i8259 b 2 + + // IDSEL 0x1d Audio + e800 0 0 0 &i8259 6 2 + + // IDSEL 0x1e Legacy + f000 0 0 0 &i8259 7 2 + f100 0 0 0 &i8259 7 2 + + // IDSEL 0x1f IDE/SATA + f800 0 0 0 &i8259 e 2 + f900 0 0 0 &i8259 5 2 + + >; + + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <02000000 0 80000000 + 02000000 0 80000000 + 0 20000000 + + 01000000 0 00000000 + 01000000 0 00000000 + 0 00100000>; + uli1575@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + ranges = <02000000 0 80000000 + 02000000 0 80000000 + 0 20000000 + + 01000000 0 00000000 + 01000000 0 00000000 + 0 00100000>; + isa@1e { + device_type = "isa"; + #interrupt-cells = <2>; + #size-cells = <1>; + #address-cells = <2>; + reg = <f000 0 0 0 0>; + ranges = <1 0 01000000 0 0 + 00001000>; + interrupt-parent = <&i8259>; + + i8259: interrupt-controller@20 { + reg = <1 20 2 + 1 a0 2 + 1 4d0 2>; + interrupt-controller; + device_type = "interrupt-controller"; + #address-cells = <0>; + #interrupt-cells = <2>; + compatible = "chrp,iic"; + interrupts = <9 2>; + interrupt-parent = <&mpic>; + }; + + i8042@60 { + #size-cells = <0>; + #address-cells = <1>; + reg = <1 60 1 1 64 1>; + interrupts = <1 3 c 3>; + interrupt-parent = + <&i8259>; + + keyboard@0 { + reg = <0>; + compatible = "pnpPNP,303"; + }; + + mouse@1 { + reg = <1>; + compatible = "pnpPNP,f03"; + }; + }; + + rtc@70 { + compatible = "pnpPNP,b00"; + reg = <1 70 2>; + }; + + gpio@400 { + reg = <1 400 80>; + }; + }; + }; + }; + + }; + + pcie@ffe09000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <ffe09000 1000>; + bus-range = <0 ff>; + ranges = <02000000 0 a0000000 a0000000 0 20000000 + 01000000 0 00000000 ffc10000 0 00010000>; + clock-frequency = <1fca055>; + interrupt-parent = <&mpic>; + interrupts = <1a 2>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 4 1 + 0000 0 0 2 &mpic 5 1 + 0000 0 0 3 &mpic 6 1 + 0000 0 0 4 &mpic 7 1 + >; + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <02000000 0 a0000000 + 02000000 0 a0000000 + 0 20000000 + + 01000000 0 00000000 + 01000000 0 00000000 + 0 00100000>; + }; + }; + + pcie@ffe0a000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <ffe0a000 1000>; + bus-range = <0 ff>; + ranges = <02000000 0 c0000000 c0000000 0 20000000 + 01000000 0 00000000 ffc20000 0 00010000>; + clock-frequency = <1fca055>; + interrupt-parent = <&mpic>; + interrupts = <1b 2>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 0 1 + 0000 0 0 2 &mpic 1 1 + 0000 0 0 3 &mpic 2 1 + 0000 0 0 4 &mpic 3 1 + >; + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <02000000 0 c0000000 + 02000000 0 c0000000 + 0 20000000 + + 01000000 0 00000000 + 01000000 0 00000000 + 0 00100000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts new file mode 100644 index 000000000000..966edf1161a6 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts @@ -0,0 +1,191 @@ +/* + * MPC8610 HPCD Device Tree Source + * + * Copyright 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License Version 2 as published + * by the Free Software Foundation. + */ + + +/ { + model = "MPC8610HPCD"; + compatible = "fsl,MPC8610HPCD"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8610@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <d# 32>; // bytes + i-cache-line-size = <d# 32>; // bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <0>; // 33 MHz, from uboot + bus-frequency = <0>; // From uboot + clock-frequency = <0>; // From uboot + }; + }; + + memory { + device_type = "memory"; + reg = <00000000 20000000>; // 512M at 0x0 + }; + + soc@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = <e0000000 1000>; + bus-frequency = <0>; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <3000 100>; + interrupts = <2b 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + i2c@3100 { + device_type = "i2c"; + compatible = "fsl-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <3100 100>; + interrupts = <2b 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; + clock-frequency = <0>; + interrupts = <2a 2>; + interrupt-parent = <&mpic>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; + clock-frequency = <0>; + interrupts = <1c 2>; + interrupt-parent = <&mpic>; + }; + + + mpic: interrupt-controller@40000 { + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + + global-utilities@e0000 { + compatible = "fsl,mpc8610-guts"; + reg = <e0000 1000>; + fsl,has-rstcr; + }; + }; + + pci@e0008000 { + compatible = "fsl,mpc8610-pci"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e0008000 1000>; + bus-range = <0 0>; + ranges = <02000000 0 80000000 80000000 0 10000000 + 01000000 0 00000000 e1000000 0 00100000>; + clock-frequency = <1fca055>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 0x11 */ + 8800 0 0 1 &mpic 4 1 + 8800 0 0 2 &mpic 5 1 + 8800 0 0 3 &mpic 6 1 + 8800 0 0 4 &mpic 7 1 + + /* IDSEL 0x12 */ + 9000 0 0 1 &mpic 5 1 + 9000 0 0 2 &mpic 6 1 + 9000 0 0 3 &mpic 7 1 + 9000 0 0 4 &mpic 4 1 + >; + }; + + pcie@e000a000 { + compatible = "fsl,mpc8641-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e000a000 1000>; + bus-range = <1 3>; + ranges = <02000000 0 a0000000 a0000000 0 10000000 + 01000000 0 00000000 e3000000 0 00100000>; + clock-frequency = <1fca055>; + interrupt-parent = <&mpic>; + interrupts = <1a 2>; + interrupt-map-mask = <f800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x1b */ + d800 0 0 1 &mpic 2 1 + + /* IDSEL 0x1c*/ + e000 0 0 1 &mpic 1 1 + e000 0 0 2 &mpic 1 1 + e000 0 0 3 &mpic 1 1 + e000 0 0 4 &mpic 1 1 + + /* IDSEL 0x1f */ + f800 0 0 1 &mpic 3 0 + f800 0 0 2 &mpic 0 1 + >; + + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <02000000 0 a0000000 + 02000000 0 a0000000 + 0 10000000 + 01000000 0 00000000 + 01000000 0 00000000 + 0 00100000>; + uli1575@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + ranges = <02000000 0 a0000000 + 02000000 0 a0000000 + 0 10000000 + 01000000 0 00000000 + 01000000 0 00000000 + 0 00100000>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts index b0166e5c177e..367765937a06 100644 --- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts +++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts @@ -30,7 +30,6 @@ timebase-frequency = <0>; // 33 MHz, from uboot bus-frequency = <0>; // From uboot clock-frequency = <0>; // From uboot - 32-bit; }; PowerPC,8641@1 { device_type = "cpu"; @@ -42,7 +41,6 @@ timebase-frequency = <0>; // 33 MHz, from uboot bus-frequency = <0>; // From uboot clock-frequency = <0>; // From uboot - 32-bit; }; }; @@ -54,13 +52,8 @@ soc8641@f8000000 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "soc"; - ranges = <00001000 f8001000 000ff000 - 80000000 80000000 20000000 - e2000000 e2000000 00100000 - a0000000 a0000000 20000000 - e3000000 e3000000 00100000>; + ranges = <00000000 f8000000 00100000>; reg = <f8000000 00001000>; // CCSRBAR bus-frequency = <0>; @@ -211,50 +204,81 @@ interrupt-parent = <&mpic>; }; - pcie@8000 { - compatible = "fsl,mpc8641-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; + mpic: pic@40000 { + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + + global-utilities@e0000 { + compatible = "fsl,mpc8641-guts"; + reg = <e0000 1000>; + fsl,has-rstcr; + }; + }; + + pcie@f8008000 { + compatible = "fsl,mpc8641-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <f8008000 1000>; + bus-range = <0 ff>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <1fca055>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + interrupt-map-mask = <fb00 0 0 0>; + interrupt-map = < + /* IDSEL 0x11 */ + 8800 0 0 1 &i8259 9 2 + 8800 0 0 2 &i8259 a 2 + 8800 0 0 3 &i8259 b 2 + 8800 0 0 4 &i8259 c 2 + + /* IDSEL 0x12 */ + 9000 0 0 1 &i8259 a 2 + 9000 0 0 2 &i8259 b 2 + 9000 0 0 3 &i8259 c 2 + 9000 0 0 4 &i8259 9 2 + + // IDSEL 0x1c USB + e000 0 0 0 &i8259 c 2 + e100 0 0 0 &i8259 9 2 + e200 0 0 0 &i8259 a 2 + e300 0 0 0 &i8259 b 2 + + // IDSEL 0x1d Audio + e800 0 0 0 &i8259 6 2 + + // IDSEL 0x1e Legacy + f000 0 0 0 &i8259 7 2 + f100 0 0 0 &i8259 7 2 + + // IDSEL 0x1f IDE/SATA + f800 0 0 0 &i8259 e 2 + f900 0 0 0 &i8259 5 2 + >; + + pcie@0 { + reg = <0 0 0 0 0>; #size-cells = <2>; #address-cells = <3>; - reg = <8000 1000>; - bus-range = <0 ff>; - ranges = <02000000 0 80000000 80000000 0 20000000 - 01000000 0 00000000 e2000000 0 00100000>; - clock-frequency = <1fca055>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - interrupt-map-mask = <fb00 0 0 0>; - interrupt-map = < - /* IDSEL 0x11 */ - 8800 0 0 1 &i8259 9 2 - 8800 0 0 2 &i8259 a 2 - 8800 0 0 3 &i8259 b 2 - 8800 0 0 4 &i8259 c 2 - - /* IDSEL 0x12 */ - 9000 0 0 1 &i8259 a 2 - 9000 0 0 2 &i8259 b 2 - 9000 0 0 3 &i8259 c 2 - 9000 0 0 4 &i8259 9 2 - - // IDSEL 0x1c USB - e000 0 0 0 &i8259 c 2 - e100 0 0 0 &i8259 9 2 - e200 0 0 0 &i8259 a 2 - e300 0 0 0 &i8259 b 2 - - // IDSEL 0x1d Audio - e800 0 0 0 &i8259 6 2 - - // IDSEL 0x1e Legacy - f000 0 0 0 &i8259 7 2 - f100 0 0 0 &i8259 7 2 - - // IDSEL 0x1f IDE/SATA - f800 0 0 0 &i8259 e 2 - f900 0 0 0 &i8259 5 2 - >; + device_type = "pci"; + ranges = <02000000 0 80000000 + 02000000 0 80000000 + 0 20000000 + + 01000000 0 00000000 + 01000000 0 00000000 + 0 00100000>; uli1575@0 { reg = <0 0 0 0 0>; #size-cells = <2>; @@ -265,111 +289,96 @@ 01000000 0 00000000 01000000 0 00000000 0 00100000>; + isa@1e { + device_type = "isa"; + #interrupt-cells = <2>; + #size-cells = <1>; + #address-cells = <2>; + reg = <f000 0 0 0 0>; + ranges = <1 0 01000000 0 0 + 00001000>; + interrupt-parent = <&i8259>; - pci_bridge@0 { - reg = <0 0 0 0 0>; - #size-cells = <2>; - #address-cells = <3>; - ranges = <02000000 0 80000000 - 02000000 0 80000000 - 0 20000000 - 01000000 0 00000000 - 01000000 0 00000000 - 0 00100000>; - - isa@1e { - device_type = "isa"; + i8259: interrupt-controller@20 { + reg = <1 20 2 + 1 a0 2 + 1 4d0 2>; + interrupt-controller; + device_type = "interrupt-controller"; + #address-cells = <0>; #interrupt-cells = <2>; - #size-cells = <1>; - #address-cells = <2>; - reg = <f000 0 0 0 0>; - ranges = <1 0 01000000 0 0 - 00001000>; - interrupt-parent = <&i8259>; - - i8259: interrupt-controller@20 { - reg = <1 20 2 - 1 a0 2 - 1 4d0 2>; - clock-frequency = <0>; - interrupt-controller; - device_type = "interrupt-controller"; - #address-cells = <0>; - #interrupt-cells = <2>; - built-in; - compatible = "chrp,iic"; - interrupts = <9 2>; - interrupt-parent = - <&mpic>; - }; + compatible = "chrp,iic"; + interrupts = <9 2>; + interrupt-parent = <&mpic>; + }; - i8042@60 { - #size-cells = <0>; - #address-cells = <1>; - reg = <1 60 1 1 64 1>; - interrupts = <1 3 c 3>; - interrupt-parent = - <&i8259>; - - keyboard@0 { - reg = <0>; - compatible = "pnpPNP,303"; - }; - - mouse@1 { - reg = <1>; - compatible = "pnpPNP,f03"; - }; - }; + i8042@60 { + #size-cells = <0>; + #address-cells = <1>; + reg = <1 60 1 1 64 1>; + interrupts = <1 3 c 3>; + interrupt-parent = + <&i8259>; - rtc@70 { - compatible = - "pnpPNP,b00"; - reg = <1 70 2>; + keyboard@0 { + reg = <0>; + compatible = "pnpPNP,303"; }; - gpio@400 { - reg = <1 400 80>; + mouse@1 { + reg = <1>; + compatible = "pnpPNP,f03"; }; }; + + rtc@70 { + compatible = + "pnpPNP,b00"; + reg = <1 70 2>; + }; + + gpio@400 { + reg = <1 400 80>; + }; }; }; - }; - pcie@9000 { - compatible = "fsl,mpc8641-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; + }; + + pcie@f8009000 { + compatible = "fsl,mpc8641-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <f8009000 1000>; + bus-range = <0 ff>; + ranges = <02000000 0 a0000000 a0000000 0 20000000 + 01000000 0 00000000 e3000000 0 00100000>; + clock-frequency = <1fca055>; + interrupt-parent = <&mpic>; + interrupts = <19 2>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 4 1 + 0000 0 0 2 &mpic 5 1 + 0000 0 0 3 &mpic 6 1 + 0000 0 0 4 &mpic 7 1 + >; + pcie@0 { + reg = <0 0 0 0 0>; #size-cells = <2>; #address-cells = <3>; - reg = <9000 1000>; - bus-range = <0 ff>; - ranges = <02000000 0 a0000000 a0000000 0 20000000 - 01000000 0 00000000 e3000000 0 00100000>; - clock-frequency = <1fca055>; - interrupt-parent = <&mpic>; - interrupts = <19 2>; - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 4 1 - 0000 0 0 2 &mpic 5 1 - 0000 0 0 3 &mpic 6 1 - 0000 0 0 4 &mpic 7 1 - >; - }; + device_type = "pci"; + ranges = <02000000 0 a0000000 + 02000000 0 a0000000 + 0 20000000 - mpic: pic@40000 { - clock-frequency = <0>; - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <40000 40000>; - built-in; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - big-endian; + 01000000 0 00000000 + 01000000 0 00000000 + 0 00100000>; }; }; }; diff --git a/arch/powerpc/boot/dts/mpc866ads.dts b/arch/powerpc/boot/dts/mpc866ads.dts index e5e7726ddb03..90f2293ed3cd 100644 --- a/arch/powerpc/boot/dts/mpc866ads.dts +++ b/arch/powerpc/boot/dts/mpc866ads.dts @@ -30,7 +30,6 @@ timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; - 32-bit; interrupts = <f 2>; // decrementer interrupt interrupt-parent = <&Mpc8xx_pic>; }; @@ -44,7 +43,6 @@ soc866@ff000000 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "soc"; ranges = <0 ff000000 00100000>; reg = <ff000000 00000200>; @@ -78,7 +76,6 @@ #address-cells = <0>; #interrupt-cells = <2>; reg = <0 24>; - built-in; device_type = "mpc8xx-pic"; compatible = "CPM"; }; @@ -86,7 +83,6 @@ cpm@ff000000 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "cpm"; model = "CPM"; ranges = <0 0 4000>; @@ -103,7 +99,6 @@ interrupts = <5 2 0 2>; interrupt-parent = <&Mpc8xx_pic>; reg = <930 20>; - built-in; device_type = "cpm-pic"; compatible = "CPM"; }; diff --git a/arch/powerpc/boot/dts/mpc885ads.dts b/arch/powerpc/boot/dts/mpc885ads.dts index dc7ab9c80611..8848e637293e 100644 --- a/arch/powerpc/boot/dts/mpc885ads.dts +++ b/arch/powerpc/boot/dts/mpc885ads.dts @@ -2,6 +2,7 @@ * MPC885 ADS Device Tree Source * * Copyright 2006 MontaVista Software, Inc. + * Copyright 2007 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -12,7 +13,7 @@ / { model = "MPC885ADS"; - compatible = "mpc8xx"; + compatible = "fsl,mpc885ads"; #address-cells = <1>; #size-cells = <1>; @@ -23,161 +24,199 @@ PowerPC,885@0 { device_type = "cpu"; reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <2000>; // L1, 8K - i-cache-size = <2000>; // L1, 8K + d-cache-line-size = <d#16>; + i-cache-line-size = <d#16>; + d-cache-size = <d#8192>; + i-cache-size = <d#8192>; timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; - 32-bit; interrupts = <f 2>; // decrementer interrupt - interrupt-parent = <&Mpc8xx_pic>; + interrupt-parent = <&PIC>; }; }; memory { device_type = "memory"; - reg = <00000000 800000>; + reg = <0 0>; }; - soc885@ff000000 { + localbus@ff000100 { + compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <ff000100 40>; + + ranges = < + 0 0 fe000000 00800000 + 1 0 ff080000 00008000 + 5 0 ff0a0000 00008000 + >; + + flash@0,0 { + compatible = "jedec-flash"; + reg = <0 0 800000>; + bank-width = <4>; + device-width = <1>; + }; + + board-control@1,0 { + reg = <1 0 20 5 300 4>; + compatible = "fsl,mpc885ads-bcsr"; + }; + }; + + soc@ff000000 { + compatible = "fsl,mpc885", "fsl,pq1-soc"; #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "soc"; - ranges = <0 ff000000 00100000>; - reg = <ff000000 00000200>; + ranges = <0 ff000000 00004000>; bus-frequency = <0>; - mdio@e80 { - device_type = "mdio"; - compatible = "fs_enet"; - reg = <e80 8>; + + // Temporary -- will go away once kernel uses ranges for get_immrbase(). + reg = <ff000000 4000>; + + mdio@e00 { + compatible = "fsl,mpc885-fec-mdio", "fsl,pq1-fec-mdio"; + reg = <e00 188>; #address-cells = <1>; #size-cells = <0>; - Phy0: ethernet-phy@0 { + + PHY0: ethernet-phy@0 { reg = <0>; device_type = "ethernet-phy"; }; - Phy1: ethernet-phy@1 { + + PHY1: ethernet-phy@1 { reg = <1>; device_type = "ethernet-phy"; }; - Phy2: ethernet-phy@2 { + + PHY2: ethernet-phy@2 { reg = <2>; device_type = "ethernet-phy"; }; }; - fec@e00 { + ethernet@e00 { device_type = "network"; - compatible = "fs_enet"; - model = "FEC"; - device-id = <1>; + compatible = "fsl,mpc885-fec-enet", + "fsl,pq1-fec-enet"; reg = <e00 188>; - mac-address = [ 00 00 0C 00 01 FD ]; + local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <3 1>; - interrupt-parent = <&Mpc8xx_pic>; - phy-handle = <&Phy1>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY0>; + linux,network-index = <0>; }; - fec@1e00 { + ethernet@1e00 { device_type = "network"; - compatible = "fs_enet"; - model = "FEC"; - device-id = <2>; + compatible = "fsl,mpc885-fec-enet", + "fsl,pq1-fec-enet"; reg = <1e00 188>; - mac-address = [ 00 00 0C 00 02 FD ]; + local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <7 1>; - interrupt-parent = <&Mpc8xx_pic>; - phy-handle = <&Phy2>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY1>; + linux,network-index = <1>; }; - Mpc8xx_pic: pic@ff000000 { + PIC: interrupt-controller@0 { interrupt-controller; - #address-cells = <0>; #interrupt-cells = <2>; reg = <0 24>; - built-in; - device_type = "mpc8xx-pic"; - compatible = "CPM"; + compatible = "fsl,mpc885-pic", "fsl,pq1-pic"; }; - pcmcia@0080 { + pcmcia@80 { #address-cells = <3>; #interrupt-cells = <1>; #size-cells = <2>; compatible = "fsl,pq-pcmcia"; device_type = "pcmcia"; reg = <80 80>; - interrupt-parent = <&Mpc8xx_pic>; + interrupt-parent = <&PIC>; interrupts = <d 1>; }; - cpm@ff000000 { + cpm@9c0 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; - device_type = "cpm"; - model = "CPM"; - ranges = <0 0 4000>; - reg = <860 f0>; + compatible = "fsl,mpc885-cpm", "fsl,cpm1"; command-proc = <9c0>; - brg-frequency = <0>; - interrupts = <0 2>; // cpm error interrupt - interrupt-parent = <&Cpm_pic>; + interrupts = <0>; // cpm error interrupt + interrupt-parent = <&CPM_PIC>; + reg = <9c0 40>; + ranges; + + muram@2000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 2000 2000>; - Cpm_pic: pic@930 { + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0 1c00>; + }; + }; + + brg@9f0 { + compatible = "fsl,mpc885-brg", + "fsl,cpm1-brg", + "fsl,cpm-brg"; + reg = <9f0 10>; + }; + + CPM_PIC: interrupt-controller@930 { interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; + #interrupt-cells = <1>; interrupts = <5 2 0 2>; - interrupt-parent = <&Mpc8xx_pic>; + interrupt-parent = <&PIC>; reg = <930 20>; - built-in; - device_type = "cpm-pic"; - compatible = "CPM"; + compatible = "fsl,mpc885-cpm-pic", + "fsl,cpm1-pic"; }; - smc@a80 { + serial@a80 { device_type = "serial"; - compatible = "cpm_uart"; - model = "SMC"; - device-id = <1>; + compatible = "fsl,mpc885-smc-uart", + "fsl,cpm1-smc-uart"; reg = <a80 10 3e80 40>; - clock-setup = <00ffffff 0>; - rx-clock = <1>; - tx-clock = <1>; - current-speed = <0>; - interrupts = <4 3>; - interrupt-parent = <&Cpm_pic>; + interrupts = <4>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <0090>; }; - smc@a90 { + serial@a90 { device_type = "serial"; - compatible = "cpm_uart"; - model = "SMC"; - device-id = <2>; - reg = <a90 20 3f80 40>; - clock-setup = <ff00ffff 90000>; - rx-clock = <2>; - tx-clock = <2>; - current-speed = <0>; - interrupts = <3 3>; - interrupt-parent = <&Cpm_pic>; + compatible = "fsl,mpc885-smc-uart", + "fsl,cpm1-smc-uart"; + reg = <a90 10 3f80 40>; + interrupts = <3>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-brg = <2>; + fsl,cpm-command = <00d0>; }; - scc@a40 { + ethernet@a40 { device_type = "network"; - compatible = "fs_enet"; - model = "SCC"; - device-id = <3>; - reg = <a40 18 3e00 80>; - mac-address = [ 00 00 0C 00 03 FD ]; - interrupts = <1c 3>; - interrupt-parent = <&Cpm_pic>; - phy-handle = <&Phy2>; + compatible = "fsl,mpc885-scc-enet", + "fsl,cpm1-scc-enet"; + reg = <a40 18 3e00 100>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <1c>; + interrupt-parent = <&CPM_PIC>; + phy-handle = <&PHY2>; + fsl,cpm-command = <0080>; + linux,network-index = <2>; }; }; }; + + chosen { + linux,stdout-path = "/soc/cpm/serial@a80"; + }; }; diff --git a/arch/powerpc/boot/dts/pq2fads.dts b/arch/powerpc/boot/dts/pq2fads.dts new file mode 100644 index 000000000000..2d564921897a --- /dev/null +++ b/arch/powerpc/boot/dts/pq2fads.dts @@ -0,0 +1,240 @@ +/* + * Device Tree for the PQ2FADS-ZU board with an MPC8280 chip. + * + * Copyright 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/ { + model = "pq2fads"; + compatible = "fsl,pq2fads"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <d#32>; + i-cache-line-size = <d#32>; + d-cache-size = <d#16384>; + i-cache-size = <d#16384>; + timebase-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0>; + }; + + localbus@f0010100 { + compatible = "fsl,mpc8280-localbus", + "fsl,pq2-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <f0010100 60>; + + ranges = <0 0 fe000000 00800000 + 1 0 f4500000 00008000 + 8 0 f8200000 00008000>; + + flash@0,0 { + compatible = "jedec-flash"; + reg = <0 0 800000>; + bank-width = <4>; + device-width = <1>; + }; + + bcsr@1,0 { + reg = <1 0 20>; + compatible = "fsl,pq2fads-bcsr"; + }; + + PCI_PIC: pic@8,0 { + #interrupt-cells = <1>; + interrupt-controller; + reg = <8 0 8>; + compatible = "fsl,pq2ads-pci-pic"; + interrupt-parent = <&PIC>; + interrupts = <18 8>; + }; + }; + + pci@f0010800 { + device_type = "pci"; + reg = <f0010800 10c f00101ac 8 f00101c4 8>; + compatible = "fsl,mpc8280-pci", "fsl,pq2-pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + clock-frequency = <d#66000000>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 0x16 */ + b000 0 0 1 &PCI_PIC 0 + b000 0 0 2 &PCI_PIC 1 + b000 0 0 3 &PCI_PIC 2 + b000 0 0 4 &PCI_PIC 3 + + /* IDSEL 0x17 */ + b800 0 0 1 &PCI_PIC 4 + b800 0 0 2 &PCI_PIC 5 + b800 0 0 3 &PCI_PIC 6 + b800 0 0 4 &PCI_PIC 7 + + /* IDSEL 0x18 */ + c000 0 0 1 &PCI_PIC 8 + c000 0 0 2 &PCI_PIC 9 + c000 0 0 3 &PCI_PIC a + c000 0 0 4 &PCI_PIC b>; + + interrupt-parent = <&PIC>; + interrupts = <12 8>; + ranges = <42000000 0 80000000 80000000 0 20000000 + 02000000 0 a0000000 a0000000 0 20000000 + 01000000 0 00000000 f6000000 0 02000000>; + }; + + soc@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8280", "fsl,pq2-soc"; + ranges = <00000000 f0000000 00053000>; + + // Temporary -- will go away once kernel uses ranges for get_immrbase(). + reg = <f0000000 00053000>; + + cpm@119c0 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + compatible = "fsl,mpc8280-cpm", "fsl,cpm2"; + reg = <119c0 30>; + ranges; + + muram@0 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0 2000 9800 800>; + }; + }; + + brg@119f0 { + compatible = "fsl,mpc8280-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <119f0 10 115f0 10>; + }; + + serial@11a00 { + device_type = "serial"; + compatible = "fsl,mpc8280-scc-uart", + "fsl,cpm2-scc-uart"; + reg = <11a00 20 8000 100>; + interrupts = <28 8>; + interrupt-parent = <&PIC>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <00800000>; + }; + + serial@11a20 { + device_type = "serial"; + compatible = "fsl,mpc8280-scc-uart", + "fsl,cpm2-scc-uart"; + reg = <11a20 20 8100 100>; + interrupts = <29 8>; + interrupt-parent = <&PIC>; + fsl,cpm-brg = <2>; + fsl,cpm-command = <04a00000>; + }; + + ethernet@11320 { + device_type = "network"; + compatible = "fsl,mpc8280-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <11320 20 8500 100 113b0 1>; + interrupts = <21 8>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY0>; + linux,network-index = <0>; + fsl,cpm-command = <16200300>; + }; + + ethernet@11340 { + device_type = "network"; + compatible = "fsl,mpc8280-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <11340 20 8600 100 113d0 1>; + interrupts = <22 8>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY1>; + linux,network-index = <1>; + fsl,cpm-command = <1a400300>; + local-mac-address = [00 e0 0c 00 79 01]; + }; + + mdio@10d40 { + device_type = "mdio"; + compatible = "fsl,pq2fads-mdio-bitbang", + "fsl,mpc8280-mdio-bitbang", + "fsl,cpm2-mdio-bitbang"; + #address-cells = <1>; + #size-cells = <0>; + reg = <10d40 14>; + fsl,mdio-pin = <9>; + fsl,mdc-pin = <a>; + + PHY0: ethernet-phy@0 { + interrupt-parent = <&PIC>; + interrupts = <19 2>; + reg = <0>; + device_type = "ethernet-phy"; + }; + + PHY1: ethernet-phy@1 { + interrupt-parent = <&PIC>; + interrupts = <19 2>; + reg = <3>; + device_type = "ethernet-phy"; + }; + }; + + usb@11b60 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc8280-usb", + "fsl,cpm2-usb"; + reg = <11b60 18 8b00 100>; + interrupt-parent = <&PIC>; + interrupts = <b 8>; + fsl,cpm-command = <2e600000>; + }; + }; + + PIC: interrupt-controller@10c00 { + #interrupt-cells = <2>; + interrupt-controller; + reg = <10c00 80>; + compatible = "fsl,mpc8280-pic", "fsl,cpm2-pic"; + }; + + }; + + chosen { + linux,stdout-path = "/soc/cpm/serial@11a00"; + }; +}; diff --git a/arch/powerpc/boot/dts/prpmc2800.dts b/arch/powerpc/boot/dts/prpmc2800.dts index 5300b50cdc2f..297dfa53fe9e 100644 --- a/arch/powerpc/boot/dts/prpmc2800.dts +++ b/arch/powerpc/boot/dts/prpmc2800.dts @@ -9,10 +9,6 @@ * * Property values that are labeled as "Default" will be updated by bootwrapper * if it can determine the exact PrPMC type. - * - * To build: - * dtc -I dts -O asm -o prpmc2800.S -b 0 prpmc2800.dts - * dtc -I dts -O dtb -o prpmc2800.dtb -b 0 prpmc2800.dts */ / { @@ -47,7 +43,6 @@ mv64x60@f1000000 { /* Marvell Discovery */ #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <1>; model = "mv64360"; /* Default */ compatible = "marvell,mv64x60"; clock-frequency = <7f28155>; /* 133.333333 MHz */ diff --git a/arch/powerpc/boot/dts/sequoia.dts b/arch/powerpc/boot/dts/sequoia.dts new file mode 100644 index 000000000000..36be75b04de1 --- /dev/null +++ b/arch/powerpc/boot/dts/sequoia.dts @@ -0,0 +1,302 @@ +/* + * Device Tree Source for AMCC Sequoia + * + * Based on Bamboo code by Josh Boyer <jwboyer@linux.vnet.ibm.com> + * Copyright (c) 2006, 2007 IBM Corp. + * + * FIXME: Draft only! + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + * + */ + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,sequoia"; + compatible = "amcc,sequoia"; + dcr-parent = <&/cpus/PowerPC,440EPx@0>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,440EPx@0 { + device_type = "cpu"; + reg = <0>; + clock-frequency = <0>; /* Filled in by zImage */ + timebase-frequency = <0>; /* Filled in by zImage */ + i-cache-line-size = <20>; + d-cache-line-size = <20>; + i-cache-size = <8000>; + d-cache-size = <8000>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0 0>; /* Filled in by zImage */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-440epx","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0c0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-440epx","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0d0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <1e 4 1f 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-440epx","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0e0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <1c 4 1d 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-440epx", "ibm,sdr-440ep"; + dcr-reg = <00e 002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-440epx", "ibm,cpr-440ep"; + dcr-reg = <00c 002>; + }; + + plb { + compatible = "ibm,plb-440epx", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by zImage */ + + SDRAM0: sdram { + device_type = "memory-controller"; + compatible = "ibm,sdram-440epx", "ibm,sdram-44x-ddr2denali"; + dcr-reg = <010 2>; + }; + + DMA0: dma { + compatible = "ibm,dma-440epx", "ibm,dma-4xx"; + dcr-reg = <100 027>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-440epx", "ibm,mcmal2"; + dcr-reg = <180 62>; + num-tx-chans = <2>; + num-rx-chans = <2>; + interrupt-parent = <&MAL0>; + interrupts = <0 1 2 3 4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*TXEOB*/ 0 &UIC0 a 4 + /*RXEOB*/ 1 &UIC0 b 4 + /*SERR*/ 2 &UIC1 0 4 + /*TXDE*/ 3 &UIC1 1 4 + /*RXDE*/ 4 &UIC1 2 4>; + interrupt-map-mask = <ffffffff>; + }; + + POB0: opb { + compatible = "ibm,opb-440epx", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <00000000 1 00000000 80000000 + 80000000 1 80000000 80000000>; + interrupt-parent = <&UIC1>; + interrupts = <7 4>; + clock-frequency = <0>; /* Filled in by zImage */ + + EBC0: ebc { + compatible = "ibm,ebc-440epx", "ibm,ebc"; + dcr-reg = <012 2>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by zImage */ + interrupts = <5 1>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl256n", "cfi-flash"; + bank-width = <2>; + reg = <0 000000 4000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "Kernel"; + reg = <0 180000>; + }; + partition@180000 { + label = "ramdisk"; + reg = <180000 200000>; + }; + partition@380000 { + label = "file system"; + reg = <380000 3aa0000>; + }; + partition@3e20000 { + label = "kozio"; + reg = <3e20000 140000>; + }; + partition@3f60000 { + label = "env"; + reg = <3f60000 40000>; + }; + partition@3fa0000 { + label = "u-boot"; + reg = <3fa0000 60000>; + }; + }; + + }; + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600300 8>; + virtual-reg = <ef600300>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <1c200>; + interrupt-parent = <&UIC0>; + interrupts = <0 4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600400 8>; + virtual-reg = <ef600400>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <1 4>; + }; + + UART2: serial@ef600500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600500 8>; + virtual-reg = <ef600500>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC1>; + interrupts = <3 4>; + }; + + UART3: serial@ef600600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600600 8>; + virtual-reg = <ef600600>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC1>; + interrupts = <4 4>; + }; + + IIC0: i2c@ef600700 { + device_type = "i2c"; + compatible = "ibm,iic-440epx", "ibm,iic"; + reg = <ef600700 14>; + interrupt-parent = <&UIC0>; + interrupts = <2 4>; + }; + + IIC1: i2c@ef600800 { + device_type = "i2c"; + compatible = "ibm,iic-440epx", "ibm,iic"; + reg = <ef600800 14>; + interrupt-parent = <&UIC0>; + interrupts = <7 4>; + }; + + ZMII0: emac-zmii@ef600d00 { + device_type = "zmii-interface"; + compatible = "ibm,zmii-440epx", "ibm,zmii"; + reg = <ef600d00 c>; + }; + + EMAC0: ethernet@ef600e00 { + linux,network-index = <0>; + device_type = "network"; + compatible = "ibm,emac-440epx", "ibm,emac4"; + interrupt-parent = <&EMAC0>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0 &UIC0 18 4 + /*Wake*/ 1 &UIC1 1d 4>; + reg = <ef600e00 70>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rmii"; + phy-map = <00000000>; + zmii-device = <&ZMII0>; + zmii-channel = <0>; + }; + + EMAC1: ethernet@ef600f00 { + linux,network-index = <1>; + device_type = "network"; + compatible = "ibm,emac-440epx", "ibm,emac4"; + interrupt-parent = <&EMAC1>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0 &UIC0 19 4 + /*Wake*/ 1 &UIC1 1f 4>; + reg = <ef600f00 70>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <1>; + mal-rx-channel = <1>; + cell-index = <1>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rmii"; + phy-map = <00000000>; + zmii-device = <&ZMII0>; + zmii-channel = <1>; + }; + }; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@ef600300"; + bootargs = "console=ttyS0,115200"; + }; +}; diff --git a/arch/powerpc/boot/dts/walnut.dts b/arch/powerpc/boot/dts/walnut.dts new file mode 100644 index 000000000000..ec54f4e04ad6 --- /dev/null +++ b/arch/powerpc/boot/dts/walnut.dts @@ -0,0 +1,190 @@ +/* + * Device Tree Source for IBM Walnut + * + * Copyright 2007 IBM Corp. + * Josh Boyer <jwboyer@linux.vnet.ibm.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "ibm,walnut"; + compatible = "ibm,walnut"; + dcr-parent = <&/cpus/PowerPC,405GP@0>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,405GP@0 { + device_type = "cpu"; + reg = <0>; + clock-frequency = <bebc200>; /* Filled in by zImage */ + timebase-frequency = <0>; /* Filled in by zImage */ + i-cache-line-size = <20>; + d-cache-line-size = <20>; + i-cache-size = <4000>; + d-cache-size = <4000>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0>; /* Filled in by zImage */ + }; + + UIC0: interrupt-controller { + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0c0 9>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + plb { + compatible = "ibm,plb3"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by zImage */ + + SDRAM0: memory-controller { + compatible = "ibm,sdram-405gp"; + dcr-reg = <010 2>; + }; + + MAL: mcmal { + compatible = "ibm,mcmal-405gp", "ibm,mcmal"; + dcr-reg = <180 62>; + num-tx-chans = <2>; + num-rx-chans = <1>; + interrupt-parent = <&UIC0>; + interrupts = <a 4 b 4 c 4 d 4 e 4>; + }; + + POB0: opb { + compatible = "ibm,opb-405gp", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <ef600000 ef600000 a00000>; + dcr-reg = <0a0 5>; + clock-frequency = <0>; /* Filled in by zImage */ + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600300 8>; + virtual-reg = <ef600300>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <2580>; + interrupt-parent = <&UIC0>; + interrupts = <0 4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600400 8>; + virtual-reg = <ef600400>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <2580>; + interrupt-parent = <&UIC0>; + interrupts = <1 4>; + }; + + IIC: i2c@ef600500 { + compatible = "ibm,iic-405gp", "ibm,iic"; + reg = <ef600500 11>; + interrupt-parent = <&UIC0>; + interrupts = <2 4>; + }; + + GPIO: gpio@ef600700 { + compatible = "ibm,gpio-405gp"; + reg = <ef600700 20>; + }; + + EMAC: ethernet@ef600800 { + linux,network-index = <0>; + device_type = "network"; + compatible = "ibm,emac-405gp", "ibm,emac"; + interrupt-parent = <&UIC0>; + interrupts = <9 4 f 4>; + reg = <ef600800 70>; + mal-device = <&MAL>; + mal-tx-channel = <0 1>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rmii"; + phy-map = <00000001>; + }; + + }; + + EBC0: ebc { + compatible = "ibm,ebc-405gp", "ibm,ebc"; + dcr-reg = <012 2>; + #address-cells = <2>; + #size-cells = <1>; + /* The ranges property is supplied by the bootwrapper + * and is based on the firmware's configuration of the + * EBC bridge + */ + clock-frequency = <0>; /* Filled in by zImage */ + + sram@0,0 { + reg = <0 0 80000>; + }; + + flash@0,80000 { + compatible = "jedec-flash"; + bank-width = <1>; + reg = <0 80000 80000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "OpenBIOS"; + reg = <0 80000>; + read-only; + }; + }; + + ds1743@1,0 { + /* NVRAM and RTC */ + compatible = "ds1743"; + reg = <1 0 2000>; + }; + + keyboard@2,0 { + compatible = "intel,82C42PC"; + reg = <2 0 2>; + }; + + ir@3,0 { + compatible = "ti,TIR2000PAG"; + reg = <3 0 10>; + }; + + fpga@7,0 { + compatible = "Walnut-FPGA"; + reg = <7 0 10>; + virtual-reg = <f0300005>; + }; + }; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@ef600300"; + }; +}; |