summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/kernel/head_32.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/kernel/head_32.S')
-rw-r--r--arch/powerpc/kernel/head_32.S160
1 files changed, 93 insertions, 67 deletions
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index 05b08db3901d..ce6a972f2584 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -261,7 +261,7 @@ __secondary_hold_acknowledge:
tophys(r11,r1); /* use tophys(r1) if kernel */ \
beq 1f; \
mfspr r11,SPRN_SPRG_THREAD; \
- lwz r11,THREAD_INFO-THREAD(r11); \
+ lwz r11,TASK_STACK-THREAD(r11); \
addi r11,r11,THREAD_SIZE; \
tophys(r11,r11); \
1: subi r11,r11,INT_FRAME_SIZE /* alloc exc. frame */
@@ -352,9 +352,8 @@ i##n: \
* registers that might have bad values includes all the GPRs
* and all the BATs. We indicate that we are in RTAS by putting
* a non-zero value, the address of the exception frame to use,
- * in SPRG2. The machine check handler checks SPRG2 and uses its
- * value if it is non-zero. If we ever needed to free up SPRG2,
- * we could use a field in the thread_info or thread_struct instead.
+ * in thread.rtas_sp. The machine check handler checks thread.rtas_sp
+ * and uses its value if it is non-zero.
* (Other exception handlers assume that r1 is a valid kernel stack
* pointer when we take an exception from supervisor mode.)
* -- paulus.
@@ -365,16 +364,15 @@ i##n: \
mtspr SPRN_SPRG_SCRATCH1,r11
mfcr r10
#ifdef CONFIG_PPC_CHRP
- mfspr r11,SPRN_SPRG_RTAS
- cmpwi 0,r11,0
- bne 7f
+ mfspr r11, SPRN_SPRG_THREAD
+ lwz r11, RTAS_SP(r11)
+ cmpwi cr1, r11, 0
+ bne cr1, 7f
#endif /* CONFIG_PPC_CHRP */
EXCEPTION_PROLOG_1
7: EXCEPTION_PROLOG_2
addi r3,r1,STACK_FRAME_OVERHEAD
#ifdef CONFIG_PPC_CHRP
- mfspr r4,SPRN_SPRG_RTAS
- cmpwi cr1,r4,0
bne cr1,1f
#endif
EXC_XFER_STD(0x200, machine_check_exception)
@@ -500,18 +498,22 @@ InstructionTLBMiss:
*/
/* Get PTE (linux-style) and check access */
mfspr r3,SPRN_IMISS
+#if defined(CONFIG_MODULES) || defined(CONFIG_DEBUG_PAGEALLOC)
lis r1,PAGE_OFFSET@h /* check if kernel address */
cmplw 0,r1,r3
- mfspr r2,SPRN_SPRG_THREAD
- li r1,_PAGE_USER|_PAGE_PRESENT|_PAGE_EXEC /* low addresses tested as user */
- lwz r2,PGDIR(r2)
+#endif
+ mfspr r2, SPRN_SPRG_PGDIR
+#ifdef CONFIG_SWAP
+ li r1,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC
+#else
+ li r1,_PAGE_PRESENT | _PAGE_EXEC
+#endif
+#if defined(CONFIG_MODULES) || defined(CONFIG_DEBUG_PAGEALLOC)
bge- 112f
- mfspr r2,SPRN_SRR1 /* and MSR_PR bit from SRR1 */
- rlwimi r1,r2,32-12,29,29 /* shift MSR_PR to _PAGE_USER posn */
- lis r2,swapper_pg_dir@ha /* if kernel address, use */
- addi r2,r2,swapper_pg_dir@l /* kernel page table */
-112: tophys(r2,r2)
- rlwimi r2,r3,12,20,29 /* insert top 10 bits of address */
+ lis r2, (swapper_pg_dir - PAGE_OFFSET)@ha /* if kernel address, use */
+ addi r2, r2, (swapper_pg_dir - PAGE_OFFSET)@l /* kernel page table */
+#endif
+112: rlwimi r2,r3,12,20,29 /* insert top 10 bits of address */
lwz r2,0(r2) /* get pmd entry */
rlwinm. r2,r2,0,0,19 /* extract address of pte page */
beq- InstructionAddressInvalid /* return if no mapping */
@@ -519,20 +521,10 @@ InstructionTLBMiss:
lwz r0,0(r2) /* get linux-style pte */
andc. r1,r1,r0 /* check access & ~permission */
bne- InstructionAddressInvalid /* return if access not permitted */
- ori r0,r0,_PAGE_ACCESSED /* set _PAGE_ACCESSED in pte */
- /*
- * NOTE! We are assuming this is not an SMP system, otherwise
- * we would need to update the pte atomically with lwarx/stwcx.
- */
- stw r0,0(r2) /* update PTE (accessed bit) */
/* Convert linux-style PTE to low word of PPC-style PTE */
- rlwinm r1,r0,32-10,31,31 /* _PAGE_RW -> PP lsb */
- rlwinm r2,r0,32-7,31,31 /* _PAGE_DIRTY -> PP lsb */
- and r1,r1,r2 /* writable if _RW and _DIRTY */
rlwimi r0,r0,32-1,30,30 /* _PAGE_USER -> PP msb */
- rlwimi r0,r0,32-1,31,31 /* _PAGE_USER -> PP lsb */
- ori r1,r1,0xe04 /* clear out reserved bits */
- andc r1,r0,r1 /* PP = user? (rw&dirty? 2: 3): 0 */
+ ori r1, r1, 0xe05 /* clear out reserved bits */
+ andc r1, r0, r1 /* PP = user? 2 : 0 */
BEGIN_FTR_SECTION
rlwinm r1,r1,0,~_PAGE_COHERENT /* clear M (coherence not required) */
END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
@@ -576,16 +568,16 @@ DataLoadTLBMiss:
mfspr r3,SPRN_DMISS
lis r1,PAGE_OFFSET@h /* check if kernel address */
cmplw 0,r1,r3
- mfspr r2,SPRN_SPRG_THREAD
- li r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */
- lwz r2,PGDIR(r2)
+ mfspr r2, SPRN_SPRG_PGDIR
+#ifdef CONFIG_SWAP
+ li r1, _PAGE_PRESENT | _PAGE_ACCESSED
+#else
+ li r1, _PAGE_PRESENT
+#endif
bge- 112f
- mfspr r2,SPRN_SRR1 /* and MSR_PR bit from SRR1 */
- rlwimi r1,r2,32-12,29,29 /* shift MSR_PR to _PAGE_USER posn */
- lis r2,swapper_pg_dir@ha /* if kernel address, use */
- addi r2,r2,swapper_pg_dir@l /* kernel page table */
-112: tophys(r2,r2)
- rlwimi r2,r3,12,20,29 /* insert top 10 bits of address */
+ lis r2, (swapper_pg_dir - PAGE_OFFSET)@ha /* if kernel address, use */
+ addi r2, r2, (swapper_pg_dir - PAGE_OFFSET)@l /* kernel page table */
+112: rlwimi r2,r3,12,20,29 /* insert top 10 bits of address */
lwz r2,0(r2) /* get pmd entry */
rlwinm. r2,r2,0,0,19 /* extract address of pte page */
beq- DataAddressInvalid /* return if no mapping */
@@ -593,20 +585,16 @@ DataLoadTLBMiss:
lwz r0,0(r2) /* get linux-style pte */
andc. r1,r1,r0 /* check access & ~permission */
bne- DataAddressInvalid /* return if access not permitted */
- ori r0,r0,_PAGE_ACCESSED /* set _PAGE_ACCESSED in pte */
/*
* NOTE! We are assuming this is not an SMP system, otherwise
* we would need to update the pte atomically with lwarx/stwcx.
*/
- stw r0,0(r2) /* update PTE (accessed bit) */
/* Convert linux-style PTE to low word of PPC-style PTE */
rlwinm r1,r0,32-10,31,31 /* _PAGE_RW -> PP lsb */
- rlwinm r2,r0,32-7,31,31 /* _PAGE_DIRTY -> PP lsb */
- and r1,r1,r2 /* writable if _RW and _DIRTY */
rlwimi r0,r0,32-1,30,30 /* _PAGE_USER -> PP msb */
rlwimi r0,r0,32-1,31,31 /* _PAGE_USER -> PP lsb */
ori r1,r1,0xe04 /* clear out reserved bits */
- andc r1,r0,r1 /* PP = user? (rw&dirty? 2: 3): 0 */
+ andc r1,r0,r1 /* PP = user? rw? 2: 3: 0 */
BEGIN_FTR_SECTION
rlwinm r1,r1,0,~_PAGE_COHERENT /* clear M (coherence not required) */
END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
@@ -660,16 +648,16 @@ DataStoreTLBMiss:
mfspr r3,SPRN_DMISS
lis r1,PAGE_OFFSET@h /* check if kernel address */
cmplw 0,r1,r3
- mfspr r2,SPRN_SPRG_THREAD
- li r1,_PAGE_RW|_PAGE_USER|_PAGE_PRESENT /* access flags */
- lwz r2,PGDIR(r2)
+ mfspr r2, SPRN_SPRG_PGDIR
+#ifdef CONFIG_SWAP
+ li r1, _PAGE_RW | _PAGE_PRESENT | _PAGE_ACCESSED
+#else
+ li r1, _PAGE_RW | _PAGE_PRESENT
+#endif
bge- 112f
- mfspr r2,SPRN_SRR1 /* and MSR_PR bit from SRR1 */
- rlwimi r1,r2,32-12,29,29 /* shift MSR_PR to _PAGE_USER posn */
- lis r2,swapper_pg_dir@ha /* if kernel address, use */
- addi r2,r2,swapper_pg_dir@l /* kernel page table */
-112: tophys(r2,r2)
- rlwimi r2,r3,12,20,29 /* insert top 10 bits of address */
+ lis r2, (swapper_pg_dir - PAGE_OFFSET)@ha /* if kernel address, use */
+ addi r2, r2, (swapper_pg_dir - PAGE_OFFSET)@l /* kernel page table */
+112: rlwimi r2,r3,12,20,29 /* insert top 10 bits of address */
lwz r2,0(r2) /* get pmd entry */
rlwinm. r2,r2,0,0,19 /* extract address of pte page */
beq- DataAddressInvalid /* return if no mapping */
@@ -677,12 +665,10 @@ DataStoreTLBMiss:
lwz r0,0(r2) /* get linux-style pte */
andc. r1,r1,r0 /* check access & ~permission */
bne- DataAddressInvalid /* return if access not permitted */
- ori r0,r0,_PAGE_ACCESSED|_PAGE_DIRTY
/*
* NOTE! We are assuming this is not an SMP system, otherwise
* we would need to update the pte atomically with lwarx/stwcx.
*/
- stw r0,0(r2) /* update PTE (accessed/dirty bits) */
/* Convert linux-style PTE to low word of PPC-style PTE */
rlwimi r0,r0,32-1,30,30 /* _PAGE_USER -> PP msb */
li r1,0xe05 /* clear out reserved bits & PP lsb */
@@ -845,12 +831,12 @@ __secondary_start:
bl init_idle_6xx
#endif /* CONFIG_PPC_BOOK3S_32 */
- /* get current_thread_info and current */
- lis r1,secondary_ti@ha
- tophys(r1,r1)
- lwz r1,secondary_ti@l(r1)
- tophys(r2,r1)
- lwz r2,TI_TASK(r2)
+ /* get current's stack and current */
+ lis r2,secondary_current@ha
+ tophys(r2,r2)
+ lwz r2,secondary_current@l(r2)
+ tophys(r1,r2)
+ lwz r1,TASK_STACK(r1)
/* stack */
addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
@@ -865,8 +851,10 @@ __secondary_start:
tophys(r4,r2)
addi r4,r4,THREAD /* phys address of our thread_struct */
mtspr SPRN_SPRG_THREAD,r4
+#ifdef CONFIG_PPC_RTAS
li r3,0
- mtspr SPRN_SPRG_RTAS,r3 /* 0 => not in RTAS */
+ stw r3, RTAS_SP(r4) /* 0 => not in RTAS */
+#endif
/* enable MMU and jump to start_secondary */
li r4,MSR_KERNEL
@@ -950,8 +938,10 @@ start_here:
tophys(r4,r2)
addi r4,r4,THREAD /* init task's THREAD */
mtspr SPRN_SPRG_THREAD,r4
+#ifdef CONFIG_PPC_RTAS
li r3,0
- mtspr SPRN_SPRG_RTAS,r3 /* 0 => not in RTAS */
+ stw r3, RTAS_SP(r4) /* 0 => not in RTAS */
+#endif
/* stack */
lis r1,init_thread_union@ha
@@ -1022,15 +1012,16 @@ _ENTRY(switch_mmu_context)
li r0,NUM_USER_SEGMENTS
mtctr r0
+ lwz r4, MM_PGD(r4)
#ifdef CONFIG_BDI_SWITCH
/* Context switch the PTE pointer for the Abatron BDI2000.
* The PGDIR is passed as second argument.
*/
- lwz r4,MM_PGD(r4)
- lis r5, KERNELBASE@h
- lwz r5, 0xf0(r5)
- stw r4, 0x4(r5)
+ lis r5, abatron_pteptrs@ha
+ stw r4, abatron_pteptrs@l + 0x4(r5)
#endif
+ tophys(r4, r4)
+ mtspr SPRN_SPRG_PGDIR, r4
li r4,0
isync
3:
@@ -1105,6 +1096,41 @@ BEGIN_MMU_FTR_SECTION
END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS)
blr
+_ENTRY(update_bats)
+ lis r4, 1f@h
+ ori r4, r4, 1f@l
+ tophys(r4, r4)
+ mfmsr r6
+ mflr r7
+ li r3, MSR_KERNEL & ~(MSR_IR | MSR_DR)
+ rlwinm r0, r6, 0, ~MSR_RI
+ rlwinm r0, r0, 0, ~MSR_EE
+ mtmsr r0
+ mtspr SPRN_SRR0, r4
+ mtspr SPRN_SRR1, r3
+ SYNC
+ RFI
+1: bl clear_bats
+ lis r3, BATS@ha
+ addi r3, r3, BATS@l
+ tophys(r3, r3)
+ LOAD_BAT(0, r3, r4, r5)
+ LOAD_BAT(1, r3, r4, r5)
+ LOAD_BAT(2, r3, r4, r5)
+ LOAD_BAT(3, r3, r4, r5)
+BEGIN_MMU_FTR_SECTION
+ LOAD_BAT(4, r3, r4, r5)
+ LOAD_BAT(5, r3, r4, r5)
+ LOAD_BAT(6, r3, r4, r5)
+ LOAD_BAT(7, r3, r4, r5)
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS)
+ li r3, MSR_KERNEL & ~(MSR_IR | MSR_DR | MSR_RI)
+ mtmsr r3
+ mtspr SPRN_SRR0, r7
+ mtspr SPRN_SRR1, r6
+ SYNC
+ RFI
+
flush_tlbs:
lis r10, 0x40
1: addic. r10, r10, -0x1000