diff options
Diffstat (limited to 'arch/powerpc')
255 files changed, 12419 insertions, 3140 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index d00131ca0835..4fd479059d65 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -49,6 +49,9 @@ config GENERIC_HARDIRQS_NO__DO_IRQ config HAVE_SETUP_PER_CPU_AREA def_bool PPC64 +config NEED_PER_CPU_EMBED_FIRST_CHUNK + def_bool PPC64 + config IRQ_PER_CPU bool default y @@ -120,12 +123,13 @@ config PPC select HAVE_KRETPROBES select HAVE_ARCH_TRACEHOOK select HAVE_LMB - select HAVE_DMA_ATTRS if PPC64 + select HAVE_DMA_ATTRS + select HAVE_DMA_API_DEBUG select USE_GENERIC_SMP_HELPERS if SMP select HAVE_OPROFILE select HAVE_SYSCALL_WRAPPERS if PPC64 select GENERIC_ATOMIC64 if PPC32 - select HAVE_PERF_COUNTERS + select HAVE_PERF_EVENTS config EARLY_PRINTK bool @@ -307,10 +311,6 @@ config SWIOTLB platforms where the size of a physical address is larger than the bus address. Not all platforms support this. -config PPC_NEED_DMA_SYNC_OPS - def_bool y - depends on (NOT_COHERENT_CACHE || SWIOTLB) - config HOTPLUG_CPU bool "Support for enabling/disabling CPUs" depends on SMP && HOTPLUG && EXPERIMENTAL && (PPC_PSERIES || PPC_PMAC) @@ -472,7 +472,7 @@ config PPC_16K_PAGES bool "16k page size" if 44x config PPC_64K_PAGES - bool "64k page size" if 44x || PPC_STD_MMU_64 + bool "64k page size" if 44x || PPC_STD_MMU_64 || PPC_BOOK3E_64 select PPC_HAS_HASH_64K if PPC_STD_MMU_64 config PPC_256K_PAGES @@ -492,16 +492,16 @@ endchoice config FORCE_MAX_ZONEORDER int "Maximum zone order" - range 9 64 if PPC_STD_MMU_64 && PPC_64K_PAGES - default "9" if PPC_STD_MMU_64 && PPC_64K_PAGES - range 13 64 if PPC_STD_MMU_64 && !PPC_64K_PAGES - default "13" if PPC_STD_MMU_64 && !PPC_64K_PAGES - range 9 64 if PPC_STD_MMU_32 && PPC_16K_PAGES - default "9" if PPC_STD_MMU_32 && PPC_16K_PAGES - range 7 64 if PPC_STD_MMU_32 && PPC_64K_PAGES - default "7" if PPC_STD_MMU_32 && PPC_64K_PAGES - range 5 64 if PPC_STD_MMU_32 && PPC_256K_PAGES - default "5" if PPC_STD_MMU_32 && PPC_256K_PAGES + range 9 64 if PPC64 && PPC_64K_PAGES + default "9" if PPC64 && PPC_64K_PAGES + range 13 64 if PPC64 && !PPC_64K_PAGES + default "13" if PPC64 && !PPC_64K_PAGES + range 9 64 if PPC32 && PPC_16K_PAGES + default "9" if PPC32 && PPC_16K_PAGES + range 7 64 if PPC32 && PPC_64K_PAGES + default "7" if PPC32 && PPC_64K_PAGES + range 5 64 if PPC32 && PPC_256K_PAGES + default "5" if PPC32 && PPC_256K_PAGES range 11 64 default "11" help diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index bc35f4e2b81c..952a3963e9e8 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -77,7 +77,7 @@ CPP = $(CC) -E $(KBUILD_CFLAGS) CHECKFLAGS += -m$(CONFIG_WORD_SIZE) -D__powerpc__ -D__powerpc$(CONFIG_WORD_SIZE)__ ifeq ($(CONFIG_PPC64),y) -GCC_BROKEN_VEC := $(shell if [ $(call cc-version) -lt 0400 ] ; then echo "y"; fi) +GCC_BROKEN_VEC := $(call cc-ifversion, -lt, 0400, y) ifeq ($(CONFIG_POWER4_ONLY),y) ifeq ($(CONFIG_ALTIVEC),y) diff --git a/arch/powerpc/boot/4xx.c b/arch/powerpc/boot/4xx.c index 325b310573b9..27db8938827a 100644 --- a/arch/powerpc/boot/4xx.c +++ b/arch/powerpc/boot/4xx.c @@ -8,6 +8,10 @@ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> * Copyright (c) 2003, 2004 Zultys Technologies * + * Copyright (C) 2009 Wind River Systems, Inc. + * Updated for supporting PPC405EX on Kilauea. + * Tiejun Chen <tiejun.chen@windriver.com> + * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version @@ -659,3 +663,141 @@ void ibm405ep_fixup_clocks(unsigned int sys_clk) dt_fixup_clock("/plb/opb/serial@ef600300", uart0); dt_fixup_clock("/plb/opb/serial@ef600400", uart1); } + +static u8 ibm405ex_fwdv_multi_bits[] = { + /* values for: 1 - 16 */ + 0x01, 0x02, 0x0e, 0x09, 0x04, 0x0b, 0x10, 0x0d, 0x0c, 0x05, + 0x06, 0x0f, 0x0a, 0x07, 0x08, 0x03 +}; + +u32 ibm405ex_get_fwdva(unsigned long cpr_fwdv) +{ + u32 index; + + for (index = 0; index < ARRAY_SIZE(ibm405ex_fwdv_multi_bits); index++) + if (cpr_fwdv == (u32)ibm405ex_fwdv_multi_bits[index]) + return index + 1; + + return 0; +} + +static u8 ibm405ex_fbdv_multi_bits[] = { + /* values for: 1 - 100 */ + 0x00, 0xff, 0x7e, 0xfd, 0x7a, 0xf5, 0x6a, 0xd5, 0x2a, 0xd4, + 0x29, 0xd3, 0x26, 0xcc, 0x19, 0xb3, 0x67, 0xce, 0x1d, 0xbb, + 0x77, 0xee, 0x5d, 0xba, 0x74, 0xe9, 0x52, 0xa5, 0x4b, 0x96, + 0x2c, 0xd8, 0x31, 0xe3, 0x46, 0x8d, 0x1b, 0xb7, 0x6f, 0xde, + 0x3d, 0xfb, 0x76, 0xed, 0x5a, 0xb5, 0x6b, 0xd6, 0x2d, 0xdb, + 0x36, 0xec, 0x59, 0xb2, 0x64, 0xc9, 0x12, 0xa4, 0x48, 0x91, + 0x23, 0xc7, 0x0e, 0x9c, 0x38, 0xf0, 0x61, 0xc2, 0x05, 0x8b, + 0x17, 0xaf, 0x5f, 0xbe, 0x7c, 0xf9, 0x72, 0xe5, 0x4a, 0x95, + 0x2b, 0xd7, 0x2e, 0xdc, 0x39, 0xf3, 0x66, 0xcd, 0x1a, 0xb4, + 0x68, 0xd1, 0x22, 0xc4, 0x09, 0x93, 0x27, 0xcf, 0x1e, 0xbc, + /* values for: 101 - 200 */ + 0x78, 0xf1, 0x62, 0xc5, 0x0a, 0x94, 0x28, 0xd0, 0x21, 0xc3, + 0x06, 0x8c, 0x18, 0xb0, 0x60, 0xc1, 0x02, 0x84, 0x08, 0x90, + 0x20, 0xc0, 0x01, 0x83, 0x07, 0x8f, 0x1f, 0xbf, 0x7f, 0xfe, + 0x7d, 0xfa, 0x75, 0xea, 0x55, 0xaa, 0x54, 0xa9, 0x53, 0xa6, + 0x4c, 0x99, 0x33, 0xe7, 0x4e, 0x9d, 0x3b, 0xf7, 0x6e, 0xdd, + 0x3a, 0xf4, 0x69, 0xd2, 0x25, 0xcb, 0x16, 0xac, 0x58, 0xb1, + 0x63, 0xc6, 0x0d, 0x9b, 0x37, 0xef, 0x5e, 0xbd, 0x7b, 0xf6, + 0x6d, 0xda, 0x35, 0xeb, 0x56, 0xad, 0x5b, 0xb6, 0x6c, 0xd9, + 0x32, 0xe4, 0x49, 0x92, 0x24, 0xc8, 0x11, 0xa3, 0x47, 0x8e, + 0x1c, 0xb8, 0x70, 0xe1, 0x42, 0x85, 0x0b, 0x97, 0x2f, 0xdf, + /* values for: 201 - 255 */ + 0x3e, 0xfc, 0x79, 0xf2, 0x65, 0xca, 0x15, 0xab, 0x57, 0xae, + 0x5c, 0xb9, 0x73, 0xe6, 0x4d, 0x9a, 0x34, 0xe8, 0x51, 0xa2, + 0x44, 0x89, 0x13, 0xa7, 0x4f, 0x9e, 0x3c, 0xf8, 0x71, 0xe2, + 0x45, 0x8a, 0x14, 0xa8, 0x50, 0xa1, 0x43, 0x86, 0x0c, 0x98, + 0x30, 0xe0, 0x41, 0x82, 0x04, 0x88, 0x10, 0xa0, 0x40, 0x81, + 0x03, 0x87, 0x0f, 0x9f, 0x3f /* END */ +}; + +u32 ibm405ex_get_fbdv(unsigned long cpr_fbdv) +{ + u32 index; + + for (index = 0; index < ARRAY_SIZE(ibm405ex_fbdv_multi_bits); index++) + if (cpr_fbdv == (u32)ibm405ex_fbdv_multi_bits[index]) + return index + 1; + + return 0; +} + +void ibm405ex_fixup_clocks(unsigned int sys_clk, unsigned int uart_clk) +{ + /* PLL config */ + u32 pllc = CPR0_READ(DCRN_CPR0_PLLC); + u32 plld = CPR0_READ(DCRN_CPR0_PLLD); + u32 cpud = CPR0_READ(DCRN_CPR0_PRIMAD); + u32 plbd = CPR0_READ(DCRN_CPR0_PRIMBD); + u32 opbd = CPR0_READ(DCRN_CPR0_OPBD); + u32 perd = CPR0_READ(DCRN_CPR0_PERD); + + /* Dividers */ + u32 fbdv = ibm405ex_get_fbdv(__fix_zero((plld >> 24) & 0xff, 1)); + + u32 fwdva = ibm405ex_get_fwdva(__fix_zero((plld >> 16) & 0x0f, 1)); + + u32 cpudv0 = __fix_zero((cpud >> 24) & 7, 8); + + /* PLBDV0 is hardwared to 010. */ + u32 plbdv0 = 2; + u32 plb2xdv0 = __fix_zero((plbd >> 16) & 7, 8); + + u32 opbdv0 = __fix_zero((opbd >> 24) & 3, 4); + + u32 perdv0 = __fix_zero((perd >> 24) & 3, 4); + + /* Resulting clocks */ + u32 cpu, plb, opb, ebc, vco, tb, uart0, uart1; + + /* PLL's VCO is the source for primary forward ? */ + if (pllc & 0x40000000) { + u32 m; + + /* Feedback path */ + switch ((pllc >> 24) & 7) { + case 0: + /* PLLOUTx */ + m = fbdv; + break; + case 1: + /* CPU */ + m = fbdv * fwdva * cpudv0; + break; + case 5: + /* PERClk */ + m = fbdv * fwdva * plb2xdv0 * plbdv0 * opbdv0 * perdv0; + break; + default: + printf("WARNING ! Invalid PLL feedback source !\n"); + goto bypass; + } + + vco = (unsigned int)(sys_clk * m); + } else { +bypass: + /* Bypass system PLL */ + vco = 0; + } + + /* CPU = VCO / ( FWDVA x CPUDV0) */ + cpu = vco / (fwdva * cpudv0); + /* PLB = VCO / ( FWDVA x PLB2XDV0 x PLBDV0) */ + plb = vco / (fwdva * plb2xdv0 * plbdv0); + /* OPB = PLB / OPBDV0 */ + opb = plb / opbdv0; + /* EBC = OPB / PERDV0 */ + ebc = opb / perdv0; + + tb = cpu; + uart0 = uart1 = uart_clk; + + dt_fixup_cpu_clocks(cpu, tb, 0); + dt_fixup_clock("/plb", plb); + dt_fixup_clock("/plb/opb", opb); + dt_fixup_clock("/plb/opb/ebc", ebc); + dt_fixup_clock("/plb/opb/serial@ef600200", uart0); + dt_fixup_clock("/plb/opb/serial@ef600300", uart1); +} diff --git a/arch/powerpc/boot/4xx.h b/arch/powerpc/boot/4xx.h index 2606e64f0c4b..7dc5d45361bc 100644 --- a/arch/powerpc/boot/4xx.h +++ b/arch/powerpc/boot/4xx.h @@ -21,6 +21,7 @@ void ibm4xx_fixup_ebc_ranges(const char *ebc); void ibm405gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk); void ibm405ep_fixup_clocks(unsigned int sys_clk); +void ibm405ex_fixup_clocks(unsigned int sys_clk, unsigned int uart_clk); void ibm440gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk); void ibm440ep_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk, unsigned int tmr_clk); diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 9ae7b7e2ba71..7bfc8ad87798 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -39,6 +39,7 @@ DTS_FLAGS ?= -p 1024 $(obj)/4xx.o: BOOTCFLAGS += -mcpu=405 $(obj)/ebony.o: BOOTCFLAGS += -mcpu=405 +$(obj)/cuboot-hotfoot.o: BOOTCFLAGS += -mcpu=405 $(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405 $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405 $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405 @@ -67,7 +68,7 @@ src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \ cpm-serial.c stdlib.c mpc52xx-psc.c planetcore.c uartlite.c \ fsl-soc.c mpc8xx.c pq2.c src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c \ - cuboot-ebony.c treeboot-ebony.c prpmc2800.c \ + cuboot-ebony.c cuboot-hotfoot.c treeboot-ebony.c prpmc2800.c \ ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \ cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c \ cuboot-bamboo.c cuboot-mpc7448hpc2.c cuboot-taishan.c \ @@ -75,7 +76,7 @@ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \ cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \ virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \ - cuboot-acadia.c cuboot-amigaone.c + cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c src-boot := $(src-wlib) $(src-plat) empty.c src-boot := $(addprefix $(obj)/, $(src-boot)) @@ -190,6 +191,7 @@ image-$(CONFIG_DEFAULT_UIMAGE) += uImage # Board ports in arch/powerpc/platform/40x/Kconfig image-$(CONFIG_EP405) += dtbImage.ep405 +image-$(CONFIG_HOTFOOT) += cuImage.hotfoot image-$(CONFIG_WALNUT) += treeImage.walnut image-$(CONFIG_ACADIA) += cuImage.acadia diff --git a/arch/powerpc/boot/cuboot-hotfoot.c b/arch/powerpc/boot/cuboot-hotfoot.c new file mode 100644 index 000000000000..8f697b958e45 --- /dev/null +++ b/arch/powerpc/boot/cuboot-hotfoot.c @@ -0,0 +1,142 @@ +/* + * Old U-boot compatibility for Esteem 195E Hotfoot CPU Board + * + * Author: Solomon Peachy <solomon@linux-wlan.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ops.h" +#include "stdio.h" +#include "reg.h" +#include "dcr.h" +#include "4xx.h" +#include "cuboot.h" + +#define TARGET_4xx +#define TARGET_HOTFOOT + +#include "ppcboot-hotfoot.h" + +static bd_t bd; + +#define NUM_REGS 3 + +static void hotfoot_fixups(void) +{ + u32 uart = mfdcr(DCRN_CPC0_UCR) & 0x7f; + + dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); + + dt_fixup_cpu_clocks(bd.bi_procfreq, bd.bi_procfreq, 0); + dt_fixup_clock("/plb", bd.bi_plb_busfreq); + dt_fixup_clock("/plb/opb", bd.bi_opbfreq); + dt_fixup_clock("/plb/ebc", bd.bi_pci_busfreq); + dt_fixup_clock("/plb/opb/serial@ef600300", bd.bi_procfreq / uart); + dt_fixup_clock("/plb/opb/serial@ef600400", bd.bi_procfreq / uart); + + dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); + dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr); + + /* Is this a single eth/serial board? */ + if ((bd.bi_enet1addr[0] == 0) && + (bd.bi_enet1addr[1] == 0) && + (bd.bi_enet1addr[2] == 0) && + (bd.bi_enet1addr[3] == 0) && + (bd.bi_enet1addr[4] == 0) && + (bd.bi_enet1addr[5] == 0)) { + void *devp; + + printf("Trimming devtree for single serial/eth board\n"); + + devp = finddevice("/plb/opb/serial@ef600300"); + if (!devp) + fatal("Can't find node for /plb/opb/serial@ef600300"); + del_node(devp); + + devp = finddevice("/plb/opb/ethernet@ef600900"); + if (!devp) + fatal("Can't find node for /plb/opb/ethernet@ef600900"); + del_node(devp); + } + + ibm4xx_quiesce_eth((u32 *)0xef600800, (u32 *)0xef600900); + + /* Fix up flash size in fdt for 4M boards. */ + if (bd.bi_flashsize < 0x800000) { + u32 regs[NUM_REGS]; + void *devp = finddevice("/plb/ebc/nor_flash@0"); + if (!devp) + fatal("Can't find FDT node for nor_flash!??"); + + printf("Fixing devtree for 4M Flash\n"); + + /* First fix up the base addresse */ + getprop(devp, "reg", regs, sizeof(regs)); + regs[0] = 0; + regs[1] = 0xffc00000; + regs[2] = 0x00400000; + setprop(devp, "reg", regs, sizeof(regs)); + + /* Then the offsets */ + devp = finddevice("/plb/ebc/nor_flash@0/partition@0"); + if (!devp) + fatal("Can't find FDT node for partition@0"); + getprop(devp, "reg", regs, 2*sizeof(u32)); + regs[0] -= 0x400000; + setprop(devp, "reg", regs, 2*sizeof(u32)); + + devp = finddevice("/plb/ebc/nor_flash@0/partition@1"); + if (!devp) + fatal("Can't find FDT node for partition@1"); + getprop(devp, "reg", regs, 2*sizeof(u32)); + regs[0] -= 0x400000; + setprop(devp, "reg", regs, 2*sizeof(u32)); + + devp = finddevice("/plb/ebc/nor_flash@0/partition@2"); + if (!devp) + fatal("Can't find FDT node for partition@2"); + getprop(devp, "reg", regs, 2*sizeof(u32)); + regs[0] -= 0x400000; + setprop(devp, "reg", regs, 2*sizeof(u32)); + + devp = finddevice("/plb/ebc/nor_flash@0/partition@3"); + if (!devp) + fatal("Can't find FDT node for partition@3"); + getprop(devp, "reg", regs, 2*sizeof(u32)); + regs[0] -= 0x400000; + setprop(devp, "reg", regs, 2*sizeof(u32)); + + devp = finddevice("/plb/ebc/nor_flash@0/partition@4"); + if (!devp) + fatal("Can't find FDT node for partition@4"); + getprop(devp, "reg", regs, 2*sizeof(u32)); + regs[0] -= 0x400000; + setprop(devp, "reg", regs, 2*sizeof(u32)); + + devp = finddevice("/plb/ebc/nor_flash@0/partition@6"); + if (!devp) + fatal("Can't find FDT node for partition@6"); + getprop(devp, "reg", regs, 2*sizeof(u32)); + regs[0] -= 0x400000; + setprop(devp, "reg", regs, 2*sizeof(u32)); + + /* Delete the FeatFS node */ + devp = finddevice("/plb/ebc/nor_flash@0/partition@5"); + if (!devp) + fatal("Can't find FDT node for partition@5"); + del_node(devp); + } +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + platform_ops.fixups = hotfoot_fixups; + platform_ops.exit = ibm40x_dbcr_reset; + fdt_init(_dtb_start); + serial_console_init(); +} diff --git a/arch/powerpc/boot/cuboot-kilauea.c b/arch/powerpc/boot/cuboot-kilauea.c new file mode 100644 index 000000000000..80cdad6bbc3f --- /dev/null +++ b/arch/powerpc/boot/cuboot-kilauea.c @@ -0,0 +1,49 @@ +/* + * Old U-boot compatibility for PPC405EX. This image is already included + * a dtb. + * + * Author: Tiejun Chen <tiejun.chen@windriver.com> + * + * Copyright (C) 2009 Wind River Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ops.h" +#include "io.h" +#include "dcr.h" +#include "stdio.h" +#include "4xx.h" +#include "44x.h" +#include "cuboot.h" + +#define TARGET_4xx +#define TARGET_44x +#include "ppcboot.h" + +#define KILAUEA_SYS_EXT_SERIAL_CLOCK 11059200 /* ext. 11.059MHz clk */ + +static bd_t bd; + +static void kilauea_fixups(void) +{ + unsigned long sysclk = 33333333; + + ibm405ex_fixup_clocks(sysclk, KILAUEA_SYS_EXT_SERIAL_CLOCK); + dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); + ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); + dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); + dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr); +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + platform_ops.fixups = kilauea_fixups; + platform_ops.exit = ibm40x_dbcr_reset; + fdt_init(_dtb_start); + serial_console_init(); +} diff --git a/arch/powerpc/boot/dcr.h b/arch/powerpc/boot/dcr.h index 95b9f5344016..645a7c964e5f 100644 --- a/arch/powerpc/boot/dcr.h +++ b/arch/powerpc/boot/dcr.h @@ -153,9 +153,7 @@ static const unsigned long sdram_bxcr[] = { SDRAM0_B0CR, SDRAM0_B1CR, #define DCRN_CPC0_PLLMR1 0xf4 #define DCRN_CPC0_UCR 0xf5 -/* 440GX Clock control etc */ - - +/* 440GX/405EX Clock Control reg */ #define DCRN_CPR0_CLKUPD 0x020 #define DCRN_CPR0_PLLC 0x040 #define DCRN_CPR0_PLLD 0x060 diff --git a/arch/powerpc/boot/dts/arches.dts b/arch/powerpc/boot/dts/arches.dts index d9113b1e8c1d..414ef8b7e575 100644 --- a/arch/powerpc/boot/dts/arches.dts +++ b/arch/powerpc/boot/dts/arches.dts @@ -124,6 +124,16 @@ dcr-reg = <0x00c 0x002>; }; + L2C0: l2c { + compatible = "ibm,l2-cache-460gt", "ibm,l2-cache"; + dcr-reg = <0x020 0x008 /* Internal SRAM DCR's */ + 0x030 0x008>; /* L2 cache DCR's */ + cache-line-size = <32>; /* 32 bytes */ + cache-size = <262144>; /* L2, 256K */ + interrupt-parent = <&UIC1>; + interrupts = <11 1>; + }; + plb { compatible = "ibm,plb-460gt", "ibm,plb4"; #address-cells = <2>; @@ -168,6 +178,38 @@ /* ranges property is supplied by U-Boot */ interrupts = <0x6 0x4>; interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl256n", "cfi-flash"; + bank-width = <2>; + reg = <0x00000000 0x00000000 0x02000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0x00000000 0x001e0000>; + }; + partition@1e0000 { + label = "dtb"; + reg = <0x001e0000 0x00020000>; + }; + partition@200000 { + label = "root"; + reg = <0x00200000 0x00200000>; + }; + partition@400000 { + label = "user"; + reg = <0x00400000 0x01b60000>; + }; + partition@1f60000 { + label = "env"; + reg = <0x01f60000 0x00040000>; + }; + partition@1fa0000 { + label = "u-boot"; + reg = <0x01fa0000 0x00060000>; + }; + }; }; UART0: serial@ef600300 { @@ -186,6 +228,14 @@ reg = <0xef600700 0x00000014>; interrupt-parent = <&UIC0>; interrupts = <0x2 0x4>; + #address-cells = <1>; + #size-cells = <0>; + sttm@4a { + compatible = "ad,ad7414"; + reg = <0x4a>; + interrupt-parent = <&UIC1>; + interrupts = <0x0 0x8>; + }; }; IIC1: i2c@ef600800 { diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts index 5fd1ad09bdf2..c920170b7dfe 100644 --- a/arch/powerpc/boot/dts/canyonlands.dts +++ b/arch/powerpc/boot/dts/canyonlands.dts @@ -1,7 +1,7 @@ /* * Device Tree Source for AMCC Canyonlands (460EX) * - * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de> + * Copyright 2008-2009 DENX Software Engineering, Stefan Roese <sr@denx.de> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without @@ -149,19 +149,19 @@ /*RXDE*/ 0x5 0x4>; }; - USB0: ehci@bffd0400 { - compatible = "ibm,usb-ehci-460ex", "usb-ehci"; - interrupt-parent = <&UIC2>; - interrupts = <0x1d 4>; - reg = <4 0xbffd0400 0x90 4 0xbffd0490 0x70>; - }; + USB0: ehci@bffd0400 { + compatible = "ibm,usb-ehci-460ex", "usb-ehci"; + interrupt-parent = <&UIC2>; + interrupts = <0x1d 4>; + reg = <4 0xbffd0400 0x90 4 0xbffd0490 0x70>; + }; - USB1: usb@bffd0000 { - compatible = "ohci-le"; - reg = <4 0xbffd0000 0x60>; - interrupt-parent = <&UIC2>; - interrupts = <0x1e 4>; - }; + USB1: usb@bffd0000 { + compatible = "ohci-le"; + reg = <4 0xbffd0000 0x60>; + interrupt-parent = <&UIC2>; + interrupts = <0x1e 4>; + }; POB0: opb { compatible = "ibm,opb-460ex", "ibm,opb"; @@ -215,6 +215,29 @@ reg = <0x03fa0000 0x00060000>; }; }; + + ndfc@3,0 { + compatible = "ibm,ndfc"; + reg = <0x00000003 0x00000000 0x00002000>; + ccr = <0x00001000>; + bank-settings = <0x80002222>; + #address-cells = <1>; + #size-cells = <1>; + + nand { + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + }; + partition@100000 { + label = "user"; + reg = <0x00000000 0x03f00000>; + }; + }; + }; }; UART0: serial@ef600300 { diff --git a/arch/powerpc/boot/dts/eiger.dts b/arch/powerpc/boot/dts/eiger.dts new file mode 100644 index 000000000000..c4a934f2e886 --- /dev/null +++ b/arch/powerpc/boot/dts/eiger.dts @@ -0,0 +1,421 @@ +/* + * Device Tree Source for AMCC (AppliedMicro) Eiger(460SX) + * + * Copyright 2009 AMCC (AppliedMicro) <ttnguyen@amcc.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,eiger"; + compatible = "amcc,eiger"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + ethernet2 = &EMAC2; + ethernet3 = &EMAC3; + serial0 = &UART0; + serial1 = &UART1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,460SX"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + timebase-frequency = <0>; /* Filled in by U-Boot */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-460sx","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-460sx","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-460sx","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0x0e0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0xa 0x4 0xb 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC3: interrupt-controller3 { + compatible = "ibm,uic-460sx","ibm,uic"; + interrupt-controller; + cell-index = <3>; + dcr-reg = <0x0f0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-460sx"; + dcr-reg = <0x00e 0x002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-460sx"; + dcr-reg = <0x00c 0x002>; + }; + + plb { + compatible = "ibm,plb-460sx", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by U-Boot */ + + SDRAM0: sdram { + compatible = "ibm,sdram-460sx", "ibm,sdram-405gp"; + dcr-reg = <0x010 0x002>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-460sx", "ibm,mcmal2"; + dcr-reg = <0x180 0x62>; + num-tx-chans = <4>; + num-rx-chans = <32>; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&UIC1>; + interrupts = < /*TXEOB*/ 0x6 0x4 + /*RXEOB*/ 0x7 0x4 + /*SERR*/ 0x1 0x4 + /*TXDE*/ 0x2 0x4 + /*RXDE*/ 0x3 0x4 + /*COAL TX0*/ 0x18 0x2 + /*COAL TX1*/ 0x19 0x2 + /*COAL TX2*/ 0x1a 0x2 + /*COAL TX3*/ 0x1b 0x2 + /*COAL RX0*/ 0x1c 0x2 + /*COAL RX1*/ 0x1d 0x2 + /*COAL RX2*/ 0x1e 0x2 + /*COAL RX3*/ 0x1f 0x2>; + }; + + POB0: opb { + compatible = "ibm,opb-460sx", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + + EBC0: ebc { + compatible = "ibm,ebc-460sx", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by U-Boot */ + /* ranges property is supplied by U-Boot */ + interrupts = <0x6 0x4>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl512n", "cfi-flash"; + bank-width = <2>; + /* reg property is supplied in by U-Boot */ + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0x00000000 0x001e0000>; + }; + partition@1e0000 { + label = "dtb"; + reg = <0x001e0000 0x00020000>; + }; + partition@200000 { + label = "ramdisk"; + reg = <0x00200000 0x01400000>; + }; + partition@1600000 { + label = "jffs2"; + reg = <0x01600000 0x00400000>; + }; + partition@1a00000 { + label = "user"; + reg = <0x01a00000 0x02560000>; + }; + partition@3f60000 { + label = "env"; + reg = <0x03f60000 0x00040000>; + }; + partition@3fa0000 { + label = "u-boot"; + reg = <0x03fa0000 0x00060000>; + }; + }; + + ndfc@1,0 { + compatible = "ibm,ndfc"; + /* reg property is supplied by U-boot */ + ccr = <0x00003000>; + bank-settings = <0x80002222>; + #address-cells = <1>; + #size-cells = <1>; + + nand { + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "uboot"; + reg = <0x00000000 0x00200000>; + }; + partition@200000 { + label = "uboot-environment"; + reg = <0x00200000 0x00100000>; + }; + partition@300000 { + label = "linux"; + reg = <0x00300000 0x00300000>; + }; + partition@600000 { + label = "root-file-system"; + reg = <0x00600000 0x01900000>; + }; + partition@1f00000 { + label = "device-tree"; + reg = <0x01f00000 0x00020000>; + }; + partition@1f20000 { + label = "data"; + reg = <0x01f20000 0x060E0000>; + }; + }; + }; + }; + + UART0: serial@ef600200 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600200 0x00000008>; + virtual-reg = <0xef600200>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC0>; + interrupts = <0x0 0x4>; + }; + + UART1: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC0>; + interrupts = <0x1 0x4>; + }; + + IIC0: i2c@ef600400 { + compatible = "ibm,iic-460sx", "ibm,iic"; + reg = <0xef600400 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + #address-cells = <1>; + #size-cells = <0>; + index = <0>; + }; + + IIC1: i2c@ef600500 { + compatible = "ibm,iic-460sx", "ibm,iic"; + reg = <0xef600500 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x3 0x4>; + #address-cells = <1>; + #size-cells = <0>; + index = <1>; + }; + + RGMII0: emac-rgmii@ef600900 { + compatible = "ibm,rgmii-460sx", "ibm,rgmii"; + reg = <0xef600900 0x00000008>; + has-mdio; + }; + + RGMII1: emac-rgmii@ef600920 { + compatible = "ibm,rgmii-460sx", "ibm,rgmii"; + reg = <0xef600920 0x00000008>; + has-mdio; + }; + + TAH0: emac-tah@ef600e50 { + compatible = "ibm,tah-460sx", "ibm,tah"; + reg = <0xef600e50 0x00000030>; + }; + + TAH1: emac-tah@ef600f50 { + compatible = "ibm,tah-460sx", "ibm,tah"; + reg = <0xef600f50 0x00000030>; + }; + + EMAC0: ethernet@ef600a00 { + device_type = "network"; + compatible = "ibm,emac-460sx", "ibm,emac4"; + interrupt-parent = <&EMAC0>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC0 0x13 0x4 + /*Wake*/ 0x1 &UIC2 0x1d 0x4>; + reg = <0xef600a00 0x00000070>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + tah-device = <&TAH0>; + tah-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + + EMAC1: ethernet@ef600b00 { + device_type = "network"; + compatible = "ibm,emac-460sx", "ibm,emac4"; + interrupt-parent = <&EMAC1>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC0 0x14 0x4 + /*Wake*/ 0x1 &UIC2 0x1d 0x4>; + reg = <0xef600b00 0x00000070>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <1>; + mal-rx-channel = <8>; + cell-index = <1>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <1>; + tah-device = <&TAH1>; + tah-channel = <1>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + + EMAC2: ethernet@ef600c00 { + device_type = "network"; + compatible = "ibm,emac-460sx", "ibm,emac4"; + interrupt-parent = <&EMAC2>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC0 0x15 0x4 + /*Wake*/ 0x1 &UIC2 0x1d 0x4>; + reg = <0xef600c00 0x00000070>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <2>; + mal-rx-channel = <16>; + cell-index = <2>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII1>; + rgmii-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + + EMAC3: ethernet@ef600d00 { + device_type = "network"; + compatible = "ibm,emac-460sx", "ibm,emac4"; + interrupt-parent = <&EMAC3>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC0 0x16 0x4 + /*Wake*/ 0x1 &UIC2 0x1d 0x4>; + reg = <0xef600d00 0x00000070>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <3>; + mal-rx-channel = <24>; + cell-index = <3>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII1>; + rgmii-channel = <1>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + }; + + }; + chosen { + linux,stdout-path = "/plb/opb/serial@ef600200"; + }; + +}; diff --git a/arch/powerpc/boot/dts/gef_sbc310.dts b/arch/powerpc/boot/dts/gef_sbc310.dts index 0f4c9ec2c3a6..2107d3c7cfe1 100644 --- a/arch/powerpc/boot/dts/gef_sbc310.dts +++ b/arch/powerpc/boot/dts/gef_sbc310.dts @@ -83,34 +83,34 @@ /* flash@0,0 is a mirror of part of the memory in flash@1,0 flash@0,0 { - compatible = "cfi-flash"; - reg = <0 0 0x01000000>; + compatible = "gef,sbc310-firmware-mirror", "cfi-flash"; + reg = <0x0 0x0 0x01000000>; bank-width = <2>; device-width = <2>; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "firmware"; - reg = <0x00000000 0x01000000>; + reg = <0x0 0x01000000>; read-only; }; }; */ flash@1,0 { - compatible = "cfi-flash"; - reg = <1 0 0x8000000>; + compatible = "gef,sbc310-paged-flash", "cfi-flash"; + reg = <0x1 0x0 0x8000000>; bank-width = <2>; device-width = <2>; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "user"; - reg = <0x00000000 0x07800000>; + reg = <0x0 0x7800000>; }; partition@7800000 { label = "firmware"; - reg = <0x07800000 0x00800000>; + reg = <0x7800000 0x800000>; read-only; }; }; @@ -121,18 +121,16 @@ }; wdt@4,2000 { - #interrupt-cells = <2>; - device_type = "watchdog"; - compatible = "gef,fpga-wdt"; + compatible = "gef,sbc310-fpga-wdt", "gef,fpga-wdt-1.00", + "gef,fpga-wdt"; reg = <0x4 0x2000 0x8>; interrupts = <0x1a 0x4>; interrupt-parent = <&gef_pic>; }; /* wdt@4,2010 { - #interrupt-cells = <2>; - device_type = "watchdog"; - compatible = "gef,fpga-wdt"; + compatible = "gef,sbc310-fpga-wdt", "gef,fpga-wdt-1.00", + "gef,fpga-wdt"; reg = <0x4 0x2010 0x8>; interrupts = <0x1b 0x4>; interrupt-parent = <&gef_pic>; @@ -141,7 +139,7 @@ gef_pic: pic@4,4000 { #interrupt-cells = <1>; interrupt-controller; - compatible = "gef,fpga-pic"; + compatible = "gef,sbc310-fpga-pic", "gef,fpga-pic"; reg = <0x4 0x4000 0x20>; interrupts = <0x8 0x9>; @@ -161,7 +159,7 @@ #size-cells = <1>; #interrupt-cells = <2>; device_type = "soc"; - compatible = "simple-bus"; + compatible = "fsl,mpc8641-soc", "simple-bus"; ranges = <0x0 0xfef00000 0x00100000>; bus-frequency = <33333333>; @@ -376,4 +374,40 @@ 0x0 0x00400000>; }; }; + + pci1: pcie@fef09000 { + compatible = "fsl,mpc8641-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xfef09000 0x1000>; + bus-range = <0x0 0xff>; + ranges = <0x02000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xfe400000 0x0 0x00400000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <0x19 0x2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + 0x0000 0x0 0x0 0x1 &mpic 0x4 0x2 + 0x0000 0x0 0x0 0x2 &mpic 0x5 0x2 + 0x0000 0x0 0x0 0x3 &mpic 0x6 0x2 + 0x0000 0x0 0x0 0x4 &mpic 0x7 0x2 + >; + + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0x0 0xc0000000 + 0x02000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00400000>; + }; + }; }; diff --git a/arch/powerpc/boot/dts/hotfoot.dts b/arch/powerpc/boot/dts/hotfoot.dts new file mode 100644 index 000000000000..cad9c3840afc --- /dev/null +++ b/arch/powerpc/boot/dts/hotfoot.dts @@ -0,0 +1,294 @@ +/* + * Device Tree Source for ESTeem 195E Hotfoot + * + * Copyright 2009 AbsoluteValue Systems <solomon@linux-wlan.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "est,hotfoot"; + compatible = "est,hotfoot"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + serial0 = &UART0; + serial1 = &UART1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,405EP"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by zImage */ + timebase-frequency = <0>; /* Filled in by zImage */ + i-cache-line-size = <0x20>; + d-cache-line-size = <0x20>; + i-cache-size = <0x4000>; + d-cache-size = <0x4000>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000>; /* Filled in by zImage */ + }; + + UIC0: interrupt-controller { + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + plb { + compatible = "ibm,plb3"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by zImage */ + + SDRAM0: memory-controller { + compatible = "ibm,sdram-405ep"; + dcr-reg = <0x010 0x002>; + }; + + MAL: mcmal { + compatible = "ibm,mcmal-405ep", "ibm,mcmal"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <4>; + num-rx-chans = <2>; + interrupt-parent = <&UIC0>; + interrupts = < + 0xb 0x4 /* TXEOB */ + 0xc 0x4 /* RXEOB */ + 0xa 0x4 /* SERR */ + 0xd 0x4 /* TXDE */ + 0xe 0x4 /* RXDE */>; + }; + + POB0: opb { + compatible = "ibm,opb-405ep", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xef600000 0xef600000 0x00a00000>; + dcr-reg = <0x0a0 0x005>; + clock-frequency = <0>; /* Filled in by zImage */ + + /* Hotfoot has UART0/UART1 swapped */ + + UART0: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600400 0x00000008>; + virtual-reg = <0xef600400>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <0x9600>; + interrupt-parent = <&UIC0>; + interrupts = <0x1 0x4>; + }; + + UART1: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <0x9600>; + interrupt-parent = <&UIC0>; + interrupts = <0x0 0x4>; + }; + + IIC: i2c@ef600500 { + compatible = "ibm,iic-405ep", "ibm,iic"; + reg = <0xef600500 0x00000011>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + + rtc@68 { + /* Actually a DS1339 */ + compatible = "dallas,ds1307"; + reg = <0x68>; + }; + + temp@4a { + /* Not present on all boards */ + compatible = "national,lm75"; + reg = <0x4a>; + }; + }; + + GPIO: gpio@ef600700 { + #gpio-cells = <2>; + compatible = "ibm,ppc4xx-gpio"; + reg = <0xef600700 0x00000020>; + gpio-controller; + }; + + gpio-leds { + compatible = "gpio-leds"; + status { + label = "Status"; + gpios = <&GPIO 1 0>; + }; + radiorx { + label = "Rx"; + gpios = <&GPIO 0xe 0>; + }; + }; + + EMAC0: ethernet@ef600800 { + linux,network-index = <0x0>; + device_type = "network"; + compatible = "ibm,emac-405ep", "ibm,emac"; + interrupt-parent = <&UIC0>; + interrupts = < + 0xf 0x4 /* Ethernet */ + 0x9 0x4 /* Ethernet Wake Up */>; + local-mac-address = [000000000000]; /* Filled in by zImage */ + reg = <0xef600800 0x00000070>; + mal-device = <&MAL>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <0x5dc>; + rx-fifo-size = <0x1000>; + tx-fifo-size = <0x800>; + phy-mode = "mii"; + phy-map = <0x00000000>; + }; + + EMAC1: ethernet@ef600900 { + linux,network-index = <0x1>; + device_type = "network"; + compatible = "ibm,emac-405ep", "ibm,emac"; + interrupt-parent = <&UIC0>; + interrupts = < + 0x11 0x4 /* Ethernet */ + 0x9 0x4 /* Ethernet Wake Up */>; + local-mac-address = [000000000000]; /* Filled in by zImage */ + reg = <0xef600900 0x00000070>; + mal-device = <&MAL>; + mal-tx-channel = <2>; + mal-rx-channel = <1>; + cell-index = <1>; + max-frame-size = <0x5dc>; + rx-fifo-size = <0x1000>; + tx-fifo-size = <0x800>; + mdio-device = <&EMAC0>; + phy-mode = "mii"; + phy-map = <0x0000001>; + }; + }; + + EBC0: ebc { + compatible = "ibm,ebc-405ep", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + + /* The ranges property is supplied by the bootwrapper + * and is based on the firmware's configuration of the + * EBC bridge + */ + clock-frequency = <0>; /* Filled in by zImage */ + + nor_flash@0 { + compatible = "cfi-flash"; + bank-width = <2>; + reg = <0x0 0xff800000 0x00800000>; + #address-cells = <1>; + #size-cells = <1>; + + /* This mapping is for the 8M flash + 4M flash has all ofssets -= 4M, + and FeatFS partition is not present */ + partition@0 { + label = "Bootloader"; + reg = <0x7c0000 0x40000>; + /* read-only; */ + }; + partition@1 { + label = "Env_and_Config_Primary"; + reg = <0x400000 0x10000>; + }; + partition@2 { + label = "Kernel"; + reg = <0x420000 0x100000>; + }; + partition@3 { + label = "Filesystem"; + reg = <0x520000 0x2a0000>; + }; + partition@4 { + label = "Env_and_Config_Secondary"; + reg = <0x410000 0x10000>; + }; + partition@5 { + label = "FeatFS"; + reg = <0x000000 0x400000>; + }; + partition@6 { + label = "Bootloader_Env"; + reg = <0x7d0000 0x10000>; + }; + }; + }; + + PCI0: pci@ec000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb405ep-pci", "ibm,plb-pci"; + primary; + reg = <0xeec00000 0x00000008 /* Config space access */ + 0xeed80000 0x00000004 /* IACK */ + 0xeed80000 0x00000004 /* Special cycle */ + 0xef480000 0x00000040>; /* Internal registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed. Chip supports a second + * IO range but we don't use it for now + */ + ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000 + 0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; + + interrupt-parent = <&UIC0>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 3 -- slot1 (optional) 27/29 A/B IRQ2/4 */ + 0x1800 0x0 0x0 0x1 &UIC0 0x1b 0x8 + 0x1800 0x0 0x0 0x2 &UIC0 0x1d 0x8 + + /* IDSEL 4 -- slot0, 26/28 A/B IRQ1/3 */ + 0x2000 0x0 0x0 0x1 &UIC0 0x1a 0x8 + 0x2000 0x0 0x0 0x2 &UIC0 0x1c 0x8 + >; + }; + }; + + chosen { + linux,stdout-path = &UART0; + }; +}; diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts index 5e6b08ff6f67..c46561456ede 100644 --- a/arch/powerpc/boot/dts/kilauea.dts +++ b/arch/powerpc/boot/dts/kilauea.dts @@ -1,7 +1,7 @@ /* * Device Tree Source for AMCC Kilauea (405EX) * - * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de> + * Copyright 2007-2009 DENX Software Engineering, Stefan Roese <sr@denx.de> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without @@ -150,7 +150,11 @@ #size-cells = <1>; partition@0 { label = "kernel"; - reg = <0x00000000 0x00200000>; + reg = <0x00000000 0x001e0000>; + }; + partition@1e0000 { + label = "dtb"; + reg = <0x001e0000 0x00020000>; }; partition@200000 { label = "root"; @@ -169,6 +173,29 @@ reg = <0x03fa0000 0x00060000>; }; }; + + ndfc@1,0 { + compatible = "ibm,ndfc"; + reg = <0x00000001 0x00000000 0x00002000>; + ccr = <0x00001000>; + bank-settings = <0x80002222>; + #address-cells = <1>; + #size-cells = <1>; + + nand { + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + }; + partition@100000 { + label = "user"; + reg = <0x00000000 0x03f00000>; + }; + }; + }; }; UART0: serial@ef600200 { @@ -198,6 +225,18 @@ reg = <0xef600400 0x00000014>; interrupt-parent = <&UIC0>; interrupts = <0x2 0x4>; + #address-cells = <1>; + #size-cells = <0>; + + rtc@68 { + compatible = "dallas,ds1338"; + reg = <0x68>; + }; + + dtt@48 { + compatible = "dallas,ds1775"; + reg = <0x48>; + }; }; IIC1: i2c@ef600500 { @@ -207,7 +246,6 @@ interrupts = <0x7 0x4>; }; - RGMII0: emac-rgmii@ef600b00 { compatible = "ibm,rgmii-405ex", "ibm,rgmii"; reg = <0xef600b00 0x00000104>; diff --git a/arch/powerpc/boot/dts/mgcoge.dts b/arch/powerpc/boot/dts/mgcoge.dts index 633255a97557..0ce96644176d 100644 --- a/arch/powerpc/boot/dts/mgcoge.dts +++ b/arch/powerpc/boot/dts/mgcoge.dts @@ -162,6 +162,59 @@ fixed-link = <0 0 10 0 0>; }; + i2c@11860 { + compatible = "fsl,mpc8272-i2c", + "fsl,cpm2-i2c"; + reg = <0x11860 0x20 0x8afc 0x2>; + interrupts = <1 8>; + interrupt-parent = <&PIC>; + fsl,cpm-command = <0x29600000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@10d40 { + compatible = "fsl,cpm2-mdio-bitbang"; + reg = <0x10d00 0x14>; + #address-cells = <1>; + #size-cells = <0>; + fsl,mdio-pin = <12>; + fsl,mdc-pin = <13>; + + phy0: ethernet-phy@0 { + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + reg = <0x1>; + }; + }; + + /* FCC1 management to switch */ + ethernet@11300 { + device_type = "network"; + compatible = "fsl,cpm2-fcc-enet"; + reg = <0x11300 0x20 0x8400 0x100 0x11390 0x1>; + local-mac-address = [ 00 01 02 03 04 07 ]; + interrupts = <32 8>; + interrupt-parent = <&PIC>; + phy-handle = <&phy0>; + linux,network-index = <1>; + fsl,cpm-command = <0x12000300>; + }; + + /* FCC2 to redundant core unit over backplane */ + ethernet@11320 { + device_type = "network"; + compatible = "fsl,cpm2-fcc-enet"; + reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>; + local-mac-address = [ 00 01 02 03 04 08 ]; + interrupts = <33 8>; + interrupt-parent = <&PIC>; + phy-handle = <&phy1>; + linux,network-index = <2>; + fsl,cpm-command = <0x16200300>; + }; }; PIC: interrupt-controller@10c00 { diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts index 60f332778e41..e802ebd88cb1 100644 --- a/arch/powerpc/boot/dts/mpc8272ads.dts +++ b/arch/powerpc/boot/dts/mpc8272ads.dts @@ -173,6 +173,14 @@ fsl,cpm-command = <0xce00000>; }; + usb@11b60 { + compatible = "fsl,mpc8272-cpm-usb"; + reg = <0x11b60 0x40 0x8b00 0x100>; + interrupts = <11 8>; + interrupt-parent = <&PIC>; + mode = "peripheral"; + }; + mdio@10d40 { device_type = "mdio"; compatible = "fsl,mpc8272ads-mdio-bitbang", diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts index f32c2811c6d9..855782c5e5ec 100644 --- a/arch/powerpc/boot/dts/mpc8377_mds.dts +++ b/arch/powerpc/boot/dts/mpc8377_mds.dts @@ -159,6 +159,7 @@ reg = <0x2e000 0x1000>; interrupts = <42 0x8>; interrupt-parent = <&ipic>; + sdhci,wp-inverted; /* Filled in by U-Boot */ clock-frequency = <0>; }; diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts index 4f06dbc0d27e..9e2264b10008 100644 --- a/arch/powerpc/boot/dts/mpc8377_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts @@ -173,8 +173,9 @@ reg = <0x2e000 0x1000>; interrupts = <42 0x8>; interrupt-parent = <&ipic>; + sdhci,wp-inverted; /* Filled in by U-Boot */ - clock-frequency = <0>; + clock-frequency = <111111111>; }; }; diff --git a/arch/powerpc/boot/dts/mpc8377_wlan.dts b/arch/powerpc/boot/dts/mpc8377_wlan.dts new file mode 100644 index 000000000000..9a603695723b --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8377_wlan.dts @@ -0,0 +1,465 @@ +/* + * MPC8377E WLAN Device Tree Source + * + * Copyright 2007-2009 Freescale Semiconductor Inc. + * Copyright 2009 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + compatible = "fsl,mpc8377wlan"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8377@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; // 512MB at 0 + }; + + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8377-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + ranges = <0x0 0x0 0xfc000000 0x04000000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x4000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + reg = <0 0x8000>; + label = "u-boot"; + read-only; + }; + + partition@a0000 { + reg = <0xa0000 0x300000>; + label = "kernel"; + }; + + partition@3a0000 { + reg = <0x3a0000 0x3c60000>; + label = "rootfs"; + }; + }; + }; + + immr@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + gpio1: gpio-controller@c00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio"; + reg = <0xc00 0x100>; + interrupts = <74 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + gpio2: gpio-controller@d00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio"; + reg = <0xd00 0x100>; + interrupts = <75 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + sleep-nexus { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x0c000000>; + ranges; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + + at24@50 { + compatible = "at24,24c256"; + reg = <0x50>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + sdhci@2e000 { + compatible = "fsl,mpc8377-esdhc", "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <42 0x8>; + interrupt-parent = <&ipic>; + sdhci,wp-inverted; + clock-frequency = <133333333>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + spi@7000 { + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x7000 0x1000>; + interrupts = <16 0x8>; + interrupt-parent = <&ipic>; + mode = "cpu"; + }; + + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8377-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + cell-index = <0>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + cell-index = <3>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; + phy_type = "ulpi"; + sleep = <&pmc 0x00c00000>; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 0x8 33 0x8 34 0x8>; + phy-connection-type = "mii"; + interrupt-parent = <&ipic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy2>; + sleep = <&pmc 0xc0000000>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy2: ethernet-phy@2 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x2>; + device_type = "ethernet-phy"; + }; + + phy3: ethernet-phy@3 { + interrupt-parent = <&ipic>; + interrupts = <18 0x8>; + reg = <0x3>; + device_type = "ethernet-phy"; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 0x8 36 0x8 37 0x8>; + phy-connection-type = "mii"; + interrupt-parent = <&ipic>; + phy-handle = <&phy3>; + tbi-handle = <&tbi1>; + sleep = <&pmc 0x30000000>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + crypto@30000 { + compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", + "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x9fe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; + sleep = <&pmc 0x03000000>; + }; + + sata@18000 { + compatible = "fsl,mpc8377-sata", "fsl,pq-sata"; + reg = <0x18000 0x1000>; + interrupts = <44 0x8>; + interrupt-parent = <&ipic>; + sleep = <&pmc 0x000000c0>; + }; + + sata@19000 { + compatible = "fsl,mpc8377-sata", "fsl,pq-sata"; + reg = <0x19000 0x1000>; + interrupts = <45 0x8>; + interrupt-parent = <&ipic>; + sleep = <&pmc 0x00000030>; + }; + + /* IPIC + * interrupts cell = <intr #, sense> + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: interrupt-controller@700 { + compatible = "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + }; + + pmc: power@b00 { + compatible = "fsl,mpc8377-pmc", "fsl,mpc8349-pmc"; + reg = <0xb00 0x100 0xa00 0x100>; + interrupts = <80 0x8>; + interrupt-parent = <&ipic>; + }; + }; + + pci0: pci@e0008500 { + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */ + + /* IDSEL AD14 IRQ6 inta */ + 0x7000 0x0 0x0 0x1 &ipic 22 0x8 + + /* IDSEL AD15 IRQ5 inta */ + 0x7800 0x0 0x0 0x1 &ipic 21 0x8>; + interrupt-parent = <&ipic>; + interrupts = <66 0x8>; + bus-range = <0 0>; + ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>; + sleep = <&pmc 0x00010000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; + + pci1: pcie@e0009000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie"; + reg = <0xe0009000 0x00001000>; + ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb8000000 0 0x00800000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 1 8 + 0 0 0 2 &ipic 1 8 + 0 0 0 3 &ipic 1 8 + 0 0 0 4 &ipic 1 8>; + sleep = <&pmc 0x00300000>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xa8000000 + 0x02000000 0 0xa8000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; + + pci2: pcie@e000a000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie"; + reg = <0xe000a000 0x00001000>; + ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000 + 0x01000000 0 0x00000000 0xd8000000 0 0x00800000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 2 8 + 0 0 0 2 &ipic 2 8 + 0 0 0 3 &ipic 2 8 + 0 0 0 4 &ipic 2 8>; + sleep = <&pmc 0x000c0000>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xc8000000 + 0x02000000 0 0xc8000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts index f720ab9af30d..f70cf6000839 100644 --- a/arch/powerpc/boot/dts/mpc8378_mds.dts +++ b/arch/powerpc/boot/dts/mpc8378_mds.dts @@ -159,6 +159,7 @@ reg = <0x2e000 0x1000>; interrupts = <42 0x8>; interrupt-parent = <&ipic>; + sdhci,wp-inverted; /* Filled in by U-Boot */ clock-frequency = <0>; }; diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts index aabf3437cadf..4e6a1a407bbd 100644 --- a/arch/powerpc/boot/dts/mpc8378_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts @@ -173,8 +173,9 @@ reg = <0x2e000 0x1000>; interrupts = <42 0x8>; interrupt-parent = <&ipic>; + sdhci,wp-inverted; /* Filled in by U-Boot */ - clock-frequency = <0>; + clock-frequency = <111111111>; }; }; diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts index 4fa221fd9bdc..645ec51cc6e1 100644 --- a/arch/powerpc/boot/dts/mpc8379_mds.dts +++ b/arch/powerpc/boot/dts/mpc8379_mds.dts @@ -157,6 +157,7 @@ reg = <0x2e000 0x1000>; interrupts = <42 0x8>; interrupt-parent = <&ipic>; + sdhci,wp-inverted; /* Filled in by U-Boot */ clock-frequency = <0>; }; diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts index 9b1da864d890..72336d504528 100644 --- a/arch/powerpc/boot/dts/mpc8379_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts @@ -171,8 +171,9 @@ reg = <0x2e000 0x1000>; interrupts = <42 0x8>; interrupt-parent = <&ipic>; + sdhci,wp-inverted; /* Filled in by U-Boot */ - clock-frequency = <0>; + clock-frequency = <111111111>; }; }; diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts index e781ad2f1f8a..815cebb2e3e5 100644 --- a/arch/powerpc/boot/dts/mpc8536ds.dts +++ b/arch/powerpc/boot/dts/mpc8536ds.dts @@ -14,8 +14,8 @@ / { model = "fsl,mpc8536ds"; compatible = "fsl,mpc8536ds"; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; aliases { ethernet0 = &enet0; @@ -42,7 +42,7 @@ memory { device_type = "memory"; - reg = <00000000 00000000>; // Filled by U-Boot + reg = <0 0 0 0>; // Filled by U-Boot }; soc@ffe00000 { @@ -50,7 +50,7 @@ #size-cells = <1>; device_type = "soc"; compatible = "simple-bus"; - ranges = <0x0 0xffe00000 0x100000>; + ranges = <0x0 0 0xffe00000 0x100000>; bus-frequency = <0>; // Filled out by uboot. ecm-law@0 { @@ -250,6 +250,14 @@ phy_type = "ulpi"; }; + sdhci@2e000 { + compatible = "fsl,mpc8536-esdhc", "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <72 0x2>; + interrupt-parent = <&mpic>; + clock-frequency = <250000000>; + }; + serial0: serial@4500 { cell-index = <0>; device_type = "serial"; @@ -347,13 +355,13 @@ interrupt-parent = <&mpic>; interrupts = <24 0x2>; bus-range = <0 0xff>; - ranges = <0x02000000 0 0x80000000 0x80000000 0 0x10000000 - 0x01000000 0 0x00000000 0xffc00000 0 0x00010000>; + ranges = <0x02000000 0 0x80000000 0 0x80000000 0 0x10000000 + 0x01000000 0 0x00000000 0 0xffc00000 0 0x00010000>; clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <0xffe08000 0x1000>; + reg = <0 0xffe08000 0 0x1000>; }; pci1: pcie@ffe09000 { @@ -362,10 +370,10 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <0xffe09000 0x1000>; + reg = <0 0xffe09000 0 0x1000>; bus-range = <0 0xff>; - ranges = <0x02000000 0 0x98000000 0x98000000 0 0x08000000 - 0x01000000 0 0x00000000 0xffc20000 0 0x00010000>; + ranges = <0x02000000 0 0x98000000 0 0x98000000 0 0x08000000 + 0x01000000 0 0x00000000 0 0xffc20000 0 0x00010000>; clock-frequency = <33333333>; interrupt-parent = <&mpic>; interrupts = <25 0x2>; @@ -398,10 +406,10 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <0xffe0a000 0x1000>; + reg = <0 0xffe0a000 0 0x1000>; bus-range = <0 0xff>; - ranges = <0x02000000 0 0x90000000 0x90000000 0 0x08000000 - 0x01000000 0 0x00000000 0xffc10000 0 0x00010000>; + ranges = <0x02000000 0 0x90000000 0 0x90000000 0 0x08000000 + 0x01000000 0 0x00000000 0 0xffc10000 0 0x00010000>; clock-frequency = <33333333>; interrupt-parent = <&mpic>; interrupts = <26 0x2>; @@ -434,10 +442,10 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <0xffe0b000 0x1000>; + reg = <0 0xffe0b000 0 0x1000>; bus-range = <0 0xff>; - ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x20000000 - 0x01000000 0 0x00000000 0xffc30000 0 0x00010000>; + ranges = <0x02000000 0 0xa0000000 0 0xa0000000 0 0x20000000 + 0x01000000 0 0x00000000 0 0xffc30000 0 0x00010000>; clock-frequency = <33333333>; interrupt-parent = <&mpic>; interrupts = <27 0x2>; diff --git a/arch/powerpc/boot/dts/mpc8536ds_36b.dts b/arch/powerpc/boot/dts/mpc8536ds_36b.dts new file mode 100644 index 000000000000..d95b26021e62 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8536ds_36b.dts @@ -0,0 +1,475 @@ +/* + * MPC8536 DS Device Tree Source + * + * Copyright 2008-2009 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "fsl,mpc8536ds"; + compatible = "fsl,mpc8536ds"; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + pci3 = &pci3; + }; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8536@0 { + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0 0 0>; // Filled by U-Boot + }; + + soc@fffe00000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xf 0xffe00000 0x100000>; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,mpc8536-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8536-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 0x2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8536-l2-cache-controller"; + reg = <0x20000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <16 0x2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 0x2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 0x2>; + interrupt-parent = <&mpic>; + dfsrr; + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + interrupts = <0 0x1>; + interrupt-parent = <&mpic>; + }; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8536-dma", "fsl,eloplus-dma"; + reg = <0x21300 4>; + ranges = <0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8536-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8536-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8536-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8536-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + usb@22000 { + compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph"; + reg = <0x22000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&mpic>; + interrupts = <28 0x2>; + phy_type = "ulpi"; + }; + + usb@23000 { + compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&mpic>; + interrupts = <46 0x2>; + phy_type = "ulpi"; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <10 0x1>; + reg = <0>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <10 0x1>; + reg = <1>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <31 2 32 2 33 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + usb@2b000 { + compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr"; + reg = <0x2b000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&mpic>; + interrupts = <60 0x2>; + dr_mode = "peripheral"; + phy_type = "ulpi"; + }; + + sdhci@2e000 { + compatible = "fsl,mpc8536-esdhc", "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <72 0x2>; + interrupt-parent = <&mpic>; + clock-frequency = <250000000>; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <42 0x2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <42 0x2>; + interrupt-parent = <&mpic>; + }; + + crypto@30000 { + compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", + "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2 58 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x9fe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; + }; + + sata@18000 { + compatible = "fsl,mpc8536-sata", "fsl,pq-sata"; + reg = <0x18000 0x1000>; + cell-index = <1>; + interrupts = <74 0x2>; + interrupt-parent = <&mpic>; + }; + + sata@19000 { + compatible = "fsl,mpc8536-sata", "fsl,pq-sata"; + reg = <0x19000 0x1000>; + cell-index = <2>; + interrupts = <41 0x2>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { //global utilities block + compatible = "fsl,mpc8548-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + + mpic: pic@40000 { + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + + msi@41600 { + compatible = "fsl,mpc8536-msi", "fsl,mpic-msi"; + reg = <0x41600 0x80>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 + 0xe1 0 + 0xe2 0 + 0xe3 0 + 0xe4 0 + 0xe5 0 + 0xe6 0 + 0xe7 0>; + interrupt-parent = <&mpic>; + }; + }; + + pci0: pci@fffe08000 { + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x11 J17 Slot 1 */ + 0x8800 0 0 1 &mpic 1 1 + 0x8800 0 0 2 &mpic 2 1 + 0x8800 0 0 3 &mpic 3 1 + 0x8800 0 0 4 &mpic 4 1>; + + interrupt-parent = <&mpic>; + interrupts = <24 0x2>; + bus-range = <0 0xff>; + ranges = <0x02000000 0 0xf0000000 0xc 0x00000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xffc00000 0 0x00010000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xf 0xffe08000 0 0x1000>; + }; + + pci1: pcie@fffe09000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xf 0xffe09000 0 0x1000>; + bus-range = <0 0xff>; + ranges = <0x02000000 0 0xf8000000 0xc 0x18000000 0 0x08000000 + 0x01000000 0 0x00000000 0xf 0xffc20000 0 0x00010000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <25 0x2>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 4 1 + 0000 0 0 2 &mpic 5 1 + 0000 0 0 3 &mpic 6 1 + 0000 0 0 4 &mpic 7 1 + >; + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0 0xf8000000 + 0x02000000 0 0xf8000000 + 0 0x08000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@fffe0a000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xf 0xffe0a000 0 0x1000>; + bus-range = <0 0xff>; + ranges = <0x02000000 0 0xf8000000 0xc 0x10000000 0 0x08000000 + 0x01000000 0 0x00000000 0xf 0xffc10000 0 0x00010000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <26 0x2>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 0 1 + 0000 0 0 2 &mpic 1 1 + 0000 0 0 3 &mpic 2 1 + 0000 0 0 4 &mpic 3 1 + >; + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0 0xf8000000 + 0x02000000 0 0xf8000000 + 0 0x08000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@fffe0b000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xf 0xffe0b000 0 0x1000>; + bus-range = <0 0xff>; + ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xffc30000 0 0x00010000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <27 0x2>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 8 1 + 0000 0 0 2 &mpic 9 1 + 0000 0 0 3 &mpic 10 1 + 0000 0 0 4 &mpic 11 1 + >; + + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00100000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts index 475be1433fe1..4173af387c63 100644 --- a/arch/powerpc/boot/dts/mpc8548cds.dts +++ b/arch/powerpc/boot/dts/mpc8548cds.dts @@ -100,6 +100,21 @@ interrupts = <43 2>; interrupt-parent = <&mpic>; dfsrr; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + eeprom@56 { + compatible = "atmel,24c64"; + reg = <0x56>; + }; + + eeprom@57 { + compatible = "atmel,24c64"; + reg = <0x57>; + }; }; i2c@3100 { @@ -111,6 +126,11 @@ interrupts = <43 2>; interrupt-parent = <&mpic>; dfsrr; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; }; dma@21300 { diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts index 9e4ce99e1613..06332d61830a 100644 --- a/arch/powerpc/boot/dts/mpc8569mds.dts +++ b/arch/powerpc/boot/dts/mpc8569mds.dts @@ -99,8 +99,18 @@ }; bcsr@1,0 { + #address-cells = <1>; + #size-cells = <1>; compatible = "fsl,mpc8569mds-bcsr"; reg = <1 0 0x8000>; + ranges = <0 1 0 0x8000>; + + bcsr17: gpio-controller@11 { + #gpio-cells = <2>; + compatible = "fsl,mpc8569mds-bcsr-gpio"; + reg = <0x11 0x1>; + gpio-controller; + }; }; nand@3,0 { @@ -315,6 +325,14 @@ gpio-controller; }; + qe_pio_f: gpio-controller@a0 { + #gpio-cells = <2>; + compatible = "fsl,mpc8569-qe-pario-bank", + "fsl,mpc8323-qe-pario-bank"; + reg = <0xa0 0x18>; + gpio-controller; + }; + pio1: ucc_pin@01 { pio-map = < /* port pin dir open_drain assignment has_irq */ @@ -419,6 +437,16 @@ interrupt-parent = <&mpic>; }; + timer@440 { + compatible = "fsl,mpc8569-qe-gtm", + "fsl,qe-gtm", "fsl,gtm"; + reg = <0x440 0x40>; + interrupts = <12 13 14 15>; + interrupt-parent = <&qeic>; + /* Filled in by U-Boot */ + clock-frequency = <0>; + }; + spi@4c0 { #address-cells = <1>; #size-cells = <0>; @@ -446,6 +474,23 @@ mode = "cpu"; }; + usb@6c0 { + compatible = "fsl,mpc8569-qe-usb", + "fsl,mpc8323-qe-usb"; + reg = <0x6c0 0x40 0x8b00 0x100>; + interrupts = <11>; + interrupt-parent = <&qeic>; + fsl,fullspeed-clock = "clk5"; + fsl,lowspeed-clock = "brg10"; + gpios = <&qe_pio_f 3 0 /* USBOE */ + &qe_pio_f 4 0 /* USBTP */ + &qe_pio_f 5 0 /* USBTN */ + &qe_pio_f 6 0 /* USBRP */ + &qe_pio_f 8 0 /* USBRN */ + &bcsr17 6 0 /* SPEED */ + &bcsr17 5 1>; /* POWER */ + }; + enet0: ucc@2000 { device_type = "network"; compatible = "ucc_geth"; diff --git a/arch/powerpc/boot/dts/p2020rdb.dts b/arch/powerpc/boot/dts/p2020rdb.dts new file mode 100644 index 000000000000..da4cb0d8d215 --- /dev/null +++ b/arch/powerpc/boot/dts/p2020rdb.dts @@ -0,0 +1,586 @@ +/* + * P2020 RDB Device Tree Source + * + * Copyright 2009 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; +/ { + model = "fsl,P2020"; + compatible = "fsl,P2020RDB"; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,P2020@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + + PowerPC,P2020@1 { + device_type = "cpu"; + reg = <0x1>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + }; + + localbus@ffe05000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus"; + reg = <0 0xffe05000 0 0x1000>; + interrupts = <19 2>; + interrupt-parent = <&mpic>; + + /* NOR and NAND Flashes */ + ranges = <0x0 0x0 0x0 0xef000000 0x01000000 + 0x1 0x0 0x0 0xffa00000 0x00040000 + 0x2 0x0 0x0 0xffb00000 0x00020000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* This location must not be altered */ + /* 256KB for Vitesse 7385 Switch firmware */ + reg = <0x0 0x00040000>; + label = "NOR (RO) Vitesse-7385 Firmware"; + read-only; + }; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR (RO) DTB Image"; + read-only; + }; + + partition@80000 { + /* 3.5 MB for Linux Kernel Image */ + reg = <0x00080000 0x00380000>; + label = "NOR (RO) Linux Kernel Image"; + read-only; + }; + + partition@400000 { + /* 11MB for JFFS2 based Root file System */ + reg = <0x00400000 0x00b00000>; + label = "NOR (RW) JFFS2 Root File System"; + }; + + partition@f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x00f00000 0x00100000>; + label = "NOR (RO) U-Boot Image"; + read-only; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p2020-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND (RO) U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND (RO) DTB Image"; + read-only; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND (RO) Linux Kernel Image"; + read-only; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND (RO) Compressed RFS Image"; + read-only; + }; + + partition@a00000 { + /* 7MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00700000>; + label = "NAND (RW) JFFS2 Root File System"; + }; + + partition@1100000 { + /* 15MB for JFFS2 based Root file System */ + reg = <0x01100000 0x00f00000>; + label = "NAND (RW) Writable User area"; + }; + }; + + L2switch@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "vitesse-7385"; + reg = <0x2 0x0 0x20000>; + }; + + }; + + soc@ffe00000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,p2020-immr", "simple-bus"; + ranges = <0x0 0x0 0xffe00000 0x100000>; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,p2020-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,p2020-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + spi@7000 { + cell-index = <0>; + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,espi"; + reg = <0x7000 0x1000>; + interrupts = <59 0x2>; + interrupt-parent = <&mpic>; + mode = "cpu"; + + fsl_m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,espi-flash"; + reg = <0>; + linux,modalias = "fsl_m25p80"; + modal = "s25sl128b"; + spi-max-frequency = <50000000>; + mode = <0>; + + partition@0 { + /* 512KB for u-boot Bootloader Image */ + reg = <0x0 0x00080000>; + label = "SPI (RO) U-Boot Image"; + read-only; + }; + + partition@80000 { + /* 512KB for DTB Image */ + reg = <0x00080000 0x00080000>; + label = "SPI (RO) DTB Image"; + read-only; + }; + + partition@100000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00100000 0x00400000>; + label = "SPI (RO) Linux Kernel Image"; + read-only; + }; + + partition@500000 { + /* 4MB for Compressed RFS Image */ + reg = <0x00500000 0x00400000>; + label = "SPI (RO) Compressed RFS Image"; + read-only; + }; + + partition@900000 { + /* 7MB for JFFS2 based RFS */ + reg = <0x00900000 0x00700000>; + label = "SPI (RW) JFFS2 RFS"; + }; + }; + }; + + dma@c300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,eloplus-dma"; + reg = <0xc300 0x4>; + ranges = <0x0 0xc100 0x200>; + cell-index = <1>; + dma-channel@0 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <76 2>; + }; + dma-channel@80 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <77 2>; + }; + dma-channel@100 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <78 2>; + }; + dma-channel@180 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <79 2>; + }; + }; + + gpio: gpio-controller@f000 { + #gpio-cells = <2>; + compatible = "fsl,mpc8572-gpio"; + reg = <0xf000 0x100>; + interrupts = <47 0x2>; + interrupt-parent = <&mpic>; + gpio-controller; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,p2020-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2,512K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + usb@22000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl-usb2-dr"; + reg = <0x22000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <28 0x2>; + phy_type = "ulpi"; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <3 1>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <3 1>; + reg = <0x1>; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "sgmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet2: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <2>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <31 2 32 2 33 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + sdhci@2e000 { + compatible = "fsl,p2020-esdhc", "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <72 0x2>; + interrupt-parent = <&mpic>; + /* Filled in by U-Boot */ + clock-frequency = <0>; + }; + + crypto@30000 { + compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4", + "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2 58 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0xbfe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + msi@41600 { + compatible = "fsl,p2020-msi", "fsl,mpic-msi"; + reg = <0x41600 0x80>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 + 0xe1 0 + 0xe2 0 + 0xe3 0 + 0xe4 0 + 0xe5 0 + 0xe6 0 + 0xe7 0>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { //global utilities block + compatible = "fsl,p2020-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + }; + + pci0: pcie@ffe09000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xffe09000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc30000 0x0 0x10000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <25 2>; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xffe0a000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <26 2>; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts index 2d9fa68f641c..0dc90f9bd814 100644 --- a/arch/powerpc/boot/dts/sbc8349.dts +++ b/arch/powerpc/boot/dts/sbc8349.dts @@ -146,18 +146,6 @@ phy_type = "ulpi"; port0; }; - /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ - usb@23000 { - device_type = "usb"; - compatible = "fsl-usb2-dr"; - reg = <0x23000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&ipic>; - interrupts = <38 0x8>; - dr_mode = "otg"; - phy_type = "ulpi"; - }; enet0: ethernet@24000 { #address-cells = <1>; @@ -277,15 +265,55 @@ }; }; + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8349-localbus", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + ranges = <0x0 0x0 0xff800000 0x00800000 /* 8MB Flash */ + 0x1 0x0 0xf8000000 0x00002000 /* 8KB EEPROM */ + 0x2 0x0 0x10000000 0x04000000 /* 64MB SDRAM */ + 0x3 0x0 0x10000000 0x04000000>; /* 64MB SDRAM */ + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "intel,28F640J3A", "cfi-flash"; + reg = <0x0 0x0 0x800000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x00040000>; + read-only; + }; + + partition@40000 { + label = "user"; + reg = <0x00040000 0x006c0000>; + }; + + partition@700000 { + label = "legacy u-boot"; + reg = <0x00700000 0x00100000>; + read-only; + }; + + }; + }; + pci0: pci@e0008500 { interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x11 */ - 0x8800 0x0 0x0 0x1 &ipic 20 0x8 - 0x8800 0x0 0x0 0x2 &ipic 21 0x8 - 0x8800 0x0 0x0 0x3 &ipic 22 0x8 - 0x8800 0x0 0x0 0x4 &ipic 23 0x8>; + 0x8800 0x0 0x0 0x1 &ipic 48 0x8 + 0x8800 0x0 0x0 0x2 &ipic 17 0x8 + 0x8800 0x0 0x0 0x3 &ipic 18 0x8 + 0x8800 0x0 0x0 0x4 &ipic 19 0x8>; interrupt-parent = <&ipic>; interrupts = <0x42 0x8>; diff --git a/arch/powerpc/boot/dts/sbc8560.dts b/arch/powerpc/boot/dts/sbc8560.dts index 239d57a55cf4..9e13ed8a1193 100644 --- a/arch/powerpc/boot/dts/sbc8560.dts +++ b/arch/powerpc/boot/dts/sbc8560.dts @@ -303,7 +303,6 @@ global-utilities@e0000 { compatible = "fsl,mpc8560-guts"; reg = <0xe0000 0x1000>; - fsl,has-rstcr; }; }; diff --git a/arch/powerpc/boot/mktree.c b/arch/powerpc/boot/mktree.c index c2baae0a3d89..e2ae24340fc8 100644 --- a/arch/powerpc/boot/mktree.c +++ b/arch/powerpc/boot/mktree.c @@ -36,7 +36,7 @@ typedef struct boot_block { } boot_block_t; #define IMGBLK 512 -char tmpbuf[IMGBLK]; +unsigned int tmpbuf[IMGBLK / sizeof(unsigned int)]; int main(int argc, char *argv[]) { @@ -95,13 +95,13 @@ int main(int argc, char *argv[]) /* Assume zImage is an ELF file, and skip the 64K header. */ - if (read(in_fd, tmpbuf, IMGBLK) != IMGBLK) { + if (read(in_fd, tmpbuf, sizeof(tmpbuf)) != sizeof(tmpbuf)) { fprintf(stderr, "%s is too small to be an ELF image\n", argv[1]); exit(4); } - if ((*(unsigned int *)tmpbuf) != htonl(0x7f454c46)) { + if (tmpbuf[0] != htonl(0x7f454c46)) { fprintf(stderr, "%s is not an ELF image\n", argv[1]); exit(4); } @@ -121,11 +121,11 @@ int main(int argc, char *argv[]) } while (nblks-- > 0) { - if (read(in_fd, tmpbuf, IMGBLK) < 0) { + if (read(in_fd, tmpbuf, sizeof(tmpbuf)) < 0) { perror("zImage read"); exit(5); } - cp = (unsigned int *)tmpbuf; + cp = tmpbuf; for (i = 0; i < sizeof(tmpbuf) / sizeof(unsigned int); i++) cksum += *cp++; if (write(out_fd, tmpbuf, sizeof(tmpbuf)) != sizeof(tmpbuf)) { diff --git a/arch/powerpc/boot/ppcboot-hotfoot.h b/arch/powerpc/boot/ppcboot-hotfoot.h new file mode 100644 index 000000000000..1a3e80b533da --- /dev/null +++ b/arch/powerpc/boot/ppcboot-hotfoot.h @@ -0,0 +1,133 @@ +/* + * This interface is used for compatibility with old U-boots *ONLY*. + * Please do not imitate or extend this. + */ + +/* + * Unfortunately, the ESTeem Hotfoot board uses a mangled version of + * ppcboot.h for historical reasons, and in the interest of having a + * mainline kernel boot on the production board+bootloader, this was the + * least-offensive solution. Please direct all flames to: + * + * Solomon Peachy <solomon@linux-wlan.com> + * + * (This header is identical to ppcboot.h except for the + * TARGET_HOTFOOT bits) + */ + +/* + * (C) Copyright 2000, 2001 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __PPCBOOT_H__ +#define __PPCBOOT_H__ + +/* + * Board information passed to kernel from PPCBoot + * + * include/asm-ppc/ppcboot.h + */ + +#include "types.h" + +typedef struct bd_info { + unsigned long bi_memstart; /* start of DRAM memory */ + unsigned long bi_memsize; /* size of DRAM memory in bytes */ + unsigned long bi_flashstart; /* start of FLASH memory */ + unsigned long bi_flashsize; /* size of FLASH memory */ + unsigned long bi_flashoffset; /* reserved area for startup monitor */ + unsigned long bi_sramstart; /* start of SRAM memory */ + unsigned long bi_sramsize; /* size of SRAM memory */ +#if defined(TARGET_8xx) || defined(TARGET_CPM2) || defined(TARGET_85xx) ||\ + defined(TARGET_83xx) + unsigned long bi_immr_base; /* base of IMMR register */ +#endif +#if defined(TARGET_PPC_MPC52xx) + unsigned long bi_mbar_base; /* base of internal registers */ +#endif + unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */ + unsigned long bi_ip_addr; /* IP Address */ + unsigned char bi_enetaddr[6]; /* Ethernet address */ +#if defined(TARGET_HOTFOOT) + /* second onboard ethernet port */ + unsigned char bi_enet1addr[6]; +#define HAVE_ENET1ADDR +#endif /* TARGET_HOOTFOOT */ + unsigned short bi_ethspeed; /* Ethernet speed in Mbps */ + unsigned long bi_intfreq; /* Internal Freq, in MHz */ + unsigned long bi_busfreq; /* Bus Freq, in MHz */ +#if defined(TARGET_CPM2) + unsigned long bi_cpmfreq; /* CPM_CLK Freq, in MHz */ + unsigned long bi_brgfreq; /* BRG_CLK Freq, in MHz */ + unsigned long bi_sccfreq; /* SCC_CLK Freq, in MHz */ + unsigned long bi_vco; /* VCO Out from PLL, in MHz */ +#endif +#if defined(TARGET_PPC_MPC52xx) + unsigned long bi_ipbfreq; /* IPB Bus Freq, in MHz */ + unsigned long bi_pcifreq; /* PCI Bus Freq, in MHz */ +#endif + unsigned long bi_baudrate; /* Console Baudrate */ +#if defined(TARGET_4xx) + unsigned char bi_s_version[4]; /* Version of this structure */ + unsigned char bi_r_version[32]; /* Version of the ROM (IBM) */ + unsigned int bi_procfreq; /* CPU (Internal) Freq, in Hz */ + unsigned int bi_plb_busfreq; /* PLB Bus speed, in Hz */ + unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */ + unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */ +#endif +#if defined(TARGET_HOTFOOT) + unsigned int bi_pllouta_freq; /* PLL OUTA speed, in Hz */ +#endif +#if defined(TARGET_HYMOD) + hymod_conf_t bi_hymod_conf; /* hymod configuration information */ +#endif +#if defined(TARGET_EVB64260) || defined(TARGET_405EP) || defined(TARGET_44x) || \ + defined(TARGET_85xx) || defined(TARGET_83xx) || defined(TARGET_HAS_ETH1) + /* second onboard ethernet port */ + unsigned char bi_enet1addr[6]; +#define HAVE_ENET1ADDR +#endif +#if defined(TARGET_EVB64260) || defined(TARGET_440GX) || \ + defined(TARGET_85xx) || defined(TARGET_HAS_ETH2) + /* third onboard ethernet ports */ + unsigned char bi_enet2addr[6]; +#define HAVE_ENET2ADDR +#endif +#if defined(TARGET_440GX) || defined(TARGET_HAS_ETH3) + /* fourth onboard ethernet ports */ + unsigned char bi_enet3addr[6]; +#define HAVE_ENET3ADDR +#endif +#if defined(TARGET_HOTFOOT) + int bi_phynum[2]; /* Determines phy mapping */ + int bi_phymode[2]; /* Determines phy mode */ +#endif +#if defined(TARGET_4xx) + unsigned int bi_opbfreq; /* OB clock in Hz */ + int bi_iic_fast[2]; /* Use fast i2c mode */ +#endif +#if defined(TARGET_440GX) + int bi_phynum[4]; /* phy mapping */ + int bi_phymode[4]; /* phy mode */ +#endif +} bd_t; + +#define bi_tbfreq bi_intfreq + +#endif /* __PPCBOOT_H__ */ diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index 4db487d1d2a8..ac9e9a58b2b0 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -46,6 +46,7 @@ CROSS= # directory for object and other files used by this script object=arch/powerpc/boot objbin=$object +dtc=scripts/dtc/dtc # directory for working files tmpdir=. @@ -124,7 +125,7 @@ if [ -n "$dts" ]; then if [ -z "$dtb" ]; then dtb="$platform.dtb" fi - $object/dtc -O dtb -o "$dtb" -b 0 "$dts" + $dtc -O dtb -o "$dtb" -b 0 "$dts" fi if [ -z "$kernel" ]; then diff --git a/arch/powerpc/configs/40x/kilauea_defconfig b/arch/powerpc/configs/40x/kilauea_defconfig index 865725effe93..9a05ec0ec312 100644 --- a/arch/powerpc/configs/40x/kilauea_defconfig +++ b/arch/powerpc/configs/40x/kilauea_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc7 -# Wed Jun 3 10:18:16 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 13:28:37 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set CONFIG_40x=y @@ -32,11 +32,11 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -57,6 +57,7 @@ CONFIG_PPC_DCR_NATIVE=y CONFIG_PPC_DCR=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -108,7 +109,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -121,9 +121,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -137,6 +144,11 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -149,7 +161,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -CONFIG_LBD=y +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -220,6 +232,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y @@ -239,9 +252,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -344,6 +357,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -393,9 +407,8 @@ CONFIG_MTD_OF_PARTS=y # User Modules And Translation Layers # CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=m -CONFIG_MTD_BLOCK=m -# CONFIG_MTD_BLOCK_RO is not set +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set @@ -452,7 +465,17 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +CONFIG_MTD_NAND_ECC_SMC=y +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +CONFIG_MTD_NAND_NDFC=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_CAFE is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_NAND_FSL_ELBC is not set # CONFIG_MTD_ONENAND is not set # @@ -465,6 +488,7 @@ CONFIG_MTD_PHYSMAP_OF=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -504,14 +528,17 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -546,6 +573,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -621,20 +649,150 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y -# CONFIG_I2C is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_IBM_IIC=y +# CONFIG_I2C_MPC is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Graphics adapter I2C/DDC channel drivers +# +# CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_I5K_AMB is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +CONFIG_SENSORS_LM75=y +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set CONFIG_THERMAL=y +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -649,24 +807,15 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -691,10 +840,69 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +CONFIG_RTC_DRV_DS1307=y +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -708,11 +916,12 @@ CONFIG_EXT2_FS=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -818,6 +1027,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -848,6 +1058,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -859,7 +1072,6 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -873,16 +1085,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -891,6 +1102,9 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/powerpc/configs/44x/arches_defconfig b/arch/powerpc/configs/44x/arches_defconfig index f7fd32c09424..6f976b51cdd0 100644 --- a/arch/powerpc/configs/44x/arches_defconfig +++ b/arch/powerpc/configs/44x/arches_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Tue Jan 20 08:22:31 2009 +# Linux kernel version: 2.6.31-rc5 +# Thu Aug 13 14:14:07 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -31,15 +31,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -53,11 +54,14 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -71,9 +75,19 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_GROUP_SCHED is not set @@ -84,8 +98,12 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y @@ -95,23 +113,30 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -119,6 +144,12 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -130,8 +161,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -147,11 +177,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set CONFIG_PPC4xx_PCI_EXPRESS=y @@ -172,6 +197,7 @@ CONFIG_PPC4xx_PCI_EXPRESS=y CONFIG_ARCHES=y # CONFIG_CANYONLANDS is not set # CONFIG_GLACIER is not set +# CONFIG_REDWOOD is not set # CONFIG_YOSEMITE is not set # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_PPC44x_SIMPLE=y @@ -214,6 +240,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y @@ -233,10 +260,14 @@ CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_STDBINUTILS=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -261,6 +292,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -278,14 +310,12 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -335,6 +365,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -347,7 +379,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -371,8 +402,92 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y -# CONFIG_MTD is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -412,7 +527,11 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -433,6 +552,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_IBM_NEW_EMAC=y @@ -451,6 +572,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -461,7 +583,6 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -533,13 +654,143 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y -# CONFIG_I2C is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_IBM_IIC=y +# CONFIG_I2C_MPC is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Graphics adapter I2C/DDC channel drivers +# +# CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +CONFIG_SENSORS_AD7414=y +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_I5K_AMB is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set @@ -556,24 +807,15 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -600,7 +842,12 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -614,11 +861,12 @@ CONFIG_EXT2_FS=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -628,6 +876,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -660,6 +913,17 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -670,6 +934,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -681,7 +946,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -697,6 +961,7 @@ CONFIG_SUNRPC=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -711,11 +976,14 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -733,6 +1001,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -743,6 +1014,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -754,7 +1028,6 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -762,27 +1035,36 @@ CONFIG_SCHED_DEBUG=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set diff --git a/arch/powerpc/configs/44x/canyonlands_defconfig b/arch/powerpc/configs/44x/canyonlands_defconfig index 5e85412eb9fa..b312b166be66 100644 --- a/arch/powerpc/configs/44x/canyonlands_defconfig +++ b/arch/powerpc/configs/44x/canyonlands_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc3 -# Mon Feb 2 13:13:04 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 17:27:20 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -31,15 +31,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -53,11 +54,14 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -71,6 +75,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set @@ -93,8 +98,12 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y @@ -104,23 +113,30 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -128,6 +144,12 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -139,8 +161,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -176,6 +197,7 @@ CONFIG_PPC4xx_PCI_EXPRESS=y # CONFIG_ARCHES is not set CONFIG_CANYONLANDS=y # CONFIG_GLACIER is not set +# CONFIG_REDWOOD is not set # CONFIG_YOSEMITE is not set # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_PPC44x_SIMPLE=y @@ -218,6 +240,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y @@ -237,10 +260,14 @@ CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_STDBINUTILS=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -265,6 +292,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -282,14 +310,12 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -339,6 +365,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -351,7 +379,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -375,7 +402,101 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y -# CONFIG_MTD is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +CONFIG_MTD_NAND_ECC_SMC=y +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +CONFIG_MTD_NAND_NDFC=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_CAFE is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_NAND_FSL_ELBC is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y # CONFIG_PARPORT is not set @@ -418,7 +539,11 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -439,6 +564,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_IBM_NEW_EMAC=y @@ -457,6 +584,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -467,7 +595,6 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -542,7 +669,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -608,14 +734,17 @@ CONFIG_I2C_IBM_IIC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -640,6 +769,7 @@ CONFIG_SENSORS_AD7414=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -654,11 +784,14 @@ CONFIG_SENSORS_AD7414=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -666,6 +799,7 @@ CONFIG_SENSORS_AD7414=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -700,24 +834,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set -# CONFIG_USB_DABUSB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -759,6 +878,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -767,9 +887,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_OHCI_HCD_PPC_OF_LE=y +CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PCI=y CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y @@ -789,11 +909,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_LIBUSUAL=y @@ -821,7 +941,6 @@ CONFIG_USB_LIBUSUAL=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -837,6 +956,7 @@ CONFIG_USB_LIBUSUAL=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -844,9 +964,70 @@ CONFIG_USB_LIBUSUAL=y # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +CONFIG_RTC_DRV_M41T80=y +# CONFIG_RTC_DRV_M41T80_WDT is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -860,11 +1041,12 @@ CONFIG_EXT2_FS=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -874,6 +1056,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -906,6 +1093,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -916,6 +1104,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -927,7 +1116,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -941,8 +1129,48 @@ CONFIG_SUNRPC=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -957,11 +1185,13 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -979,6 +1209,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -989,6 +1222,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1000,7 +1236,6 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -1008,27 +1243,36 @@ CONFIG_SCHED_DEBUG=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set diff --git a/arch/powerpc/configs/44x/eiger_defconfig b/arch/powerpc/configs/44x/eiger_defconfig new file mode 100644 index 000000000000..007f3bd939e7 --- /dev/null +++ b/arch/powerpc/configs/44x/eiger_defconfig @@ -0,0 +1,1252 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.31-rc6 +# Wed Aug 19 13:06:50 2009 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +# CONFIG_PPC_BOOK3S_32 is not set +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +CONFIG_44x=y +# CONFIG_E200 is not set +CONFIG_PPC_FPU=y +CONFIG_4xx=y +CONFIG_BOOKE=y +CONFIG_PTE_64BIT=y +CONFIG_PHYS_64BIT=y +CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_NOT_COHERENT_CACHE=y +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DTC=y +# CONFIG_DEFAULT_UIMAGE is not set +CONFIG_PPC_DCR_NATIVE=y +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_PPC_DCR=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_FREEZER is not set +CONFIG_PPC4xx_PCI_EXPRESS=y + +# +# Platform support +# +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PQ2ADS is not set +# CONFIG_BAMBOO is not set +# CONFIG_EBONY is not set +# CONFIG_SAM440EP is not set +# CONFIG_SEQUOIA is not set +# CONFIG_TAISHAN is not set +# CONFIG_KATMAI is not set +# CONFIG_RAINIER is not set +# CONFIG_WARP is not set +# CONFIG_ARCHES is not set +# CONFIG_CANYONLANDS is not set +# CONFIG_GLACIER is not set +# CONFIG_REDWOOD is not set +CONFIG_EIGER=y +# CONFIG_YOSEMITE is not set +# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set +CONFIG_PPC44x_SIMPLE=y +# CONFIG_PPC4xx_GPIO is not set +CONFIG_460SX=y +# CONFIG_IPIC is not set +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_SCHED_HRTICK=y +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_MATH_EMULATION is not set +# CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set +CONFIG_PPC_NEED_DMA_SYNC_OPS=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_STDBINUTILS=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set +CONFIG_FORCE_MAX_ZONEORDER=11 +CONFIG_PROC_DEVICETREE=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="" +CONFIG_EXTRA_TARGETS="" +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCIEAER=y +# CONFIG_PCIE_ECRC is not set +# CONFIG_PCIEAER_INJECT is not set +# CONFIG_PCIEASPM is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +CONFIG_PCI_LEGACY=y +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_TASK_SIZE=0xc0000000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y +# CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +CONFIG_MTD_NAND_ECC_SMC=y +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +CONFIG_MTD_NAND_NDFC=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_CAFE is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_NAND_FSL_ELBC is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=35000 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +CONFIG_SCSI_SAS_ATTRS=y +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_FCOE is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_FUSION=y +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +CONFIG_FUSION_SAS=y +CONFIG_FUSION_MAX_SGE=128 +# CONFIG_FUSION_CTL is not set +# CONFIG_FUSION_LOGGING is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +CONFIG_I2O=y +CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y +CONFIG_I2O_EXT_ADAPTEC=y +# CONFIG_I2O_CONFIG is not set +# CONFIG_I2O_BUS is not set +# CONFIG_I2O_BLOCK is not set +# CONFIG_I2O_SCSI is not set +# CONFIG_I2O_PROC is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_IBM_NEW_EMAC=y +CONFIG_IBM_NEW_EMAC_RXB=256 +CONFIG_IBM_NEW_EMAC_TXB=256 +CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32 +CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256 +CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0 +# CONFIG_IBM_NEW_EMAC_DEBUG is not set +CONFIG_IBM_NEW_EMAC_ZMII=y +CONFIG_IBM_NEW_EMAC_RGMII=y +CONFIG_IBM_NEW_EMAC_TAH=y +CONFIG_IBM_NEW_EMAC_EMAC4=y +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_NET_PCI is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_ATL2 is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +CONFIG_E1000E=y +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set +# CONFIG_IGBVF is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_MV643XX_ETH is not set +# CONFIG_XILINX_LL_TEMAC is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_PCI is not set +CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +CONFIG_SERIAL_8250_EXTENDED=y +# CONFIG_SERIAL_8250_MANY_PORTS is not set +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_IBM_IIC=y +# CONFIG_I2C_MPC is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Graphics adapter I2C/DDC channel drivers +# +# CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_TSL2550 is not set +CONFIG_I2C_DEBUG_CORE=y +CONFIG_I2C_DEBUG_ALGO=y +CONFIG_I2C_DEBUG_BUS=y +CONFIG_I2C_DEBUG_CHIP=y +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_SOUND is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_UWB is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set +# CONFIG_RTC_CLASS is not set +CONFIG_DMADEVICES=y + +# +# DMA Devices +# +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y +CONFIG_PRINT_STACK_DEPTH=64 +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_PPC_EMULATED_STATS is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set +# CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set +# CONFIG_VIRQ_DEBUG is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_GF128MUL=y +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_CRYPTO_CRYPTD=y +CONFIG_CRYPTO_AUTHENC=y +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +CONFIG_CRYPTO_CCM=y +CONFIG_CRYPTO_GCM=y +CONFIG_CRYPTO_SEQIV=y + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_CTR=y +CONFIG_CRYPTO_CTS=y +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_LRW=y +CONFIG_CRYPTO_PCBC=y +CONFIG_CRYPTO_XTS=y + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=y + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +CONFIG_CRYPTO_MD4=y +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_SHA512=y +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=y +CONFIG_CRYPTO_BLOWFISH=y +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_PPC4XX is not set +# CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig index a592b5efdc4d..3a68f861b1bd 100644 --- a/arch/powerpc/configs/83xx/sbc834x_defconfig +++ b/arch/powerpc/configs/83xx/sbc834x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:13 2009 +# Linux kernel version: 2.6.31-rc5 +# Tue Aug 11 19:57:51 2009 # # CONFIG_PPC64 is not set @@ -420,7 +420,90 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y CONFIG_OF_MDIO=y @@ -436,6 +519,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 @@ -468,9 +552,38 @@ CONFIG_HAVE_IDE=y # SCSI device support # # CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -578,11 +691,21 @@ CONFIG_GIANFAR=y # # Enable WiMAX (Networking options) to see the WiMAX drivers # + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set +# CONFIG_NET_FC is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -633,9 +756,9 @@ CONFIG_DEVKMEM=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_PCI is not set +CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 # CONFIG_SERIAL_8250_EXTENDED is not set # @@ -700,6 +823,7 @@ CONFIG_I2C_MPC=y # # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set # # Graphics adapter I2C/DDC channel drivers @@ -814,6 +938,11 @@ CONFIG_WATCHDOG=y # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set CONFIG_SSB_POSSIBLE=y # @@ -856,12 +985,134 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set # CONFIG_HID_PID is not set # +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set + +# # Special HID drivers # -# CONFIG_USB_SUPPORT is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +CONFIG_USB_EHCI_FSL=y +CONFIG_USB_EHCI_HCD_PPC_OF=y +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -882,9 +1133,14 @@ CONFIG_HID=y # # File systems # -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +# CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set +CONFIG_JBD=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -940,6 +1196,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -977,7 +1234,46 @@ CONFIG_RPCSEC_GSS_KRB5=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set # CONFIG_BINARY_PRINTF is not set diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig index e9491c1c3f31..30b68bfacebf 100644 --- a/arch/powerpc/configs/mgcoge_defconfig +++ b/arch/powerpc/configs/mgcoge_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:31:51 2009 +# Linux kernel version: 2.6.31-rc5 +# Fri Aug 7 08:19:15 2009 # # CONFIG_PPC64 is not set @@ -158,6 +158,7 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y CONFIG_LBDAF=y +CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set # @@ -506,6 +507,7 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y +CONFIG_OF_I2C=y CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y @@ -582,7 +584,8 @@ CONFIG_PHYLIB=y # CONFIG_STE10XP is not set # CONFIG_LSI_ET1011C_PHY is not set CONFIG_FIXED_PHY=y -# CONFIG_MDIO_BITBANG is not set +CONFIG_MDIO_BITBANG=y +# CONFIG_MDIO_GPIO is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_MACE is not set @@ -608,8 +611,8 @@ CONFIG_MII=y # CONFIG_ATL2 is not set CONFIG_FS_ENET=y CONFIG_FS_ENET_HAS_SCC=y -# CONFIG_FS_ENET_HAS_FCC is not set -# CONFIG_FS_ENET_MDIO_FCC is not set +CONFIG_FS_ENET_HAS_FCC=y +CONFIG_FS_ENET_MDIO_FCC=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -680,7 +683,68 @@ CONFIG_HW_RANDOM=y # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set CONFIG_DEVPORT=y -# CONFIG_I2C is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIAPRO is not set + +# +# Mac SMBus host controller drivers +# +# CONFIG_I2C_POWERMAC is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_CPM=y +# CONFIG_I2C_DESIGNWARE is not set +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_MPC is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set + +# +# Graphics adapter I2C/DDC channel drivers +# +# CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_PCF8575 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # @@ -699,6 +763,9 @@ CONFIG_GPIOLIB=y # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set # # PCI GPIO expanders: @@ -727,7 +794,14 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index ada595898af1..ee6acc6557f8 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -203,6 +203,7 @@ CONFIG_MPC85xx_CDS=y CONFIG_MPC85xx_MDS=y CONFIG_MPC8536_DS=y CONFIG_MPC85xx_DS=y +CONFIG_MPC85xx_RDB=y CONFIG_SOCRATES=y CONFIG_KSI8560=y # CONFIG_XES_MPC85xx is not set diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig index e28e65e7a0e1..7de127e4ceef 100644 --- a/arch/powerpc/configs/ps3_defconfig +++ b/arch/powerpc/configs/ps3_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc5 -# Fri May 15 10:37:00 2009 +# Linux kernel version: 2.6.31-rc7 +# Mon Aug 24 17:38:50 2009 # CONFIG_PPC64=y # # Processor support # +CONFIG_PPC_BOOK3S_64=y CONFIG_PPC_BOOK3S=y # CONFIG_POWER4_ONLY is not set CONFIG_POWER3=y @@ -20,6 +21,7 @@ CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_64=y CONFIG_PPC_MM_SLICES=y CONFIG_VIRT_CPU_ACCOUNTING=y +CONFIG_PPC_HAVE_PMU_SUPPORT=y CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_64BIT=y @@ -31,6 +33,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y @@ -41,7 +44,6 @@ CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_ARCH_HAS_ILOG2_U64=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_PPC=y @@ -62,6 +64,7 @@ CONFIG_DTC=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -113,7 +116,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -126,7 +128,14 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -145,6 +154,11 @@ CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -210,7 +224,7 @@ CONFIG_PPC_CELL=y # # Cell Broadband Engine options # -CONFIG_SPU_FS=y +CONFIG_SPU_FS=m CONFIG_SPU_FS_64K_LS=y # CONFIG_SPU_TRACE is not set CONFIG_SPU_BASE=y @@ -255,6 +269,7 @@ CONFIG_BINFMT_MISC=y CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y # CONFIG_IOMMU_VMERGE is not set CONFIG_IOMMU_HELPER=y +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -285,9 +300,9 @@ CONFIG_MIGRATION=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ARCH_MEMORY_PROBE=y CONFIG_PPC_HAS_HASH_64K=y CONFIG_PPC_4K_PAGES=y @@ -399,6 +414,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -433,11 +449,14 @@ CONFIG_BT_HCIBTUSB=m CONFIG_WIRELESS=y CONFIG_CFG80211=m # CONFIG_CFG80211_REG_DEBUG is not set +# CONFIG_CFG80211_DEBUGFS is not set # CONFIG_WIRELESS_OLD_REGULATORY is not set CONFIG_WIRELESS_EXT=y # CONFIG_WIRELESS_EXT_SYSFS is not set # CONFIG_LIB80211 is not set CONFIG_MAC80211=m +CONFIG_MAC80211_DEFAULT_PS=y +CONFIG_MAC80211_DEFAULT_PS_VALUE=1 # # Rate control algorithm selection @@ -447,7 +466,6 @@ CONFIG_MAC80211_RC_PID=y CONFIG_MAC80211_RC_DEFAULT_PID=y # CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set CONFIG_MAC80211_RC_DEFAULT="pid" -# CONFIG_MAC80211_MESH is not set # CONFIG_MAC80211_LEDS is not set # CONFIG_MAC80211_DEBUGFS is not set # CONFIG_MAC80211_DEBUG_MENU is not set @@ -472,77 +490,7 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set -CONFIG_MTD=y -CONFIG_MTD_DEBUG=y -CONFIG_MTD_DEBUG_VERBOSE=0 -# CONFIG_MTD_CONCAT is not set -# CONFIG_MTD_PARTITIONS is not set -# CONFIG_MTD_TESTS is not set - -# -# User Modules And Translation Layers -# -# CONFIG_MTD_CHAR is not set -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -# CONFIG_MTD_CFI is not set -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set -# CONFIG_MTD_ONENAND is not set - -# -# LPDDR flash memory drivers -# -# CONFIG_MTD_LPDDR is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set +# CONFIG_MTD is not set CONFIG_OF_DEVICE=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y @@ -590,10 +538,6 @@ CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=m # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -626,7 +570,6 @@ CONFIG_BLK_DEV_DM=m # CONFIG_DM_UEVENT is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -646,10 +589,11 @@ CONFIG_MII=m # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set CONFIG_NETDEV_1000=y CONFIG_GELIC_NET=y CONFIG_GELIC_WIRELESS=y -CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE=y +# CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE is not set # CONFIG_NETDEV_10000 is not set # @@ -669,8 +613,7 @@ CONFIG_WLAN_80211=y # CONFIG_HOSTAP is not set # CONFIG_B43 is not set # CONFIG_B43LEGACY is not set -CONFIG_ZD1211RW=m -# CONFIG_ZD1211RW_DEBUG is not set +# CONFIG_ZD1211RW is not set # CONFIG_RT2X00 is not set # @@ -682,7 +625,7 @@ CONFIG_ZD1211RW=m # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set -CONFIG_USB_PEGASUS=m +# CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set CONFIG_USB_USBNET=m CONFIG_USB_NET_AX8817X=m @@ -693,10 +636,11 @@ CONFIG_USB_NET_AX8817X=m # CONFIG_USB_NET_GL620A is not set # CONFIG_USB_NET_NET1080 is not set # CONFIG_USB_NET_PLUSB is not set -CONFIG_USB_NET_MCS7830=m +# CONFIG_USB_NET_MCS7830 is not set # CONFIG_USB_NET_RNDIS_HOST is not set # CONFIG_USB_NET_CDC_SUBSET is not set # CONFIG_USB_NET_ZAURUS is not set +# CONFIG_USB_NET_INT51X1 is not set # CONFIG_WAN is not set CONFIG_PPP=m CONFIG_PPP_MULTILINK=y @@ -771,8 +715,7 @@ CONFIG_DEVKMEM=y # CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=16 +# CONFIG_LEGACY_PTYS is not set # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set @@ -782,6 +725,11 @@ CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -805,22 +753,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -898,6 +831,11 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set # CONFIG_SND_DRIVERS is not set CONFIG_SND_PPC=y CONFIG_SND_PS3=m @@ -930,29 +868,34 @@ CONFIG_USB_HIDDEV=y # Special HID drivers # # CONFIG_HID_A4TECH is not set -# CONFIG_HID_APPLE is not set -# CONFIG_HID_BELKIN is not set -# CONFIG_HID_CHERRY is not set +CONFIG_HID_APPLE=m +CONFIG_HID_BELKIN=m +CONFIG_HID_CHERRY=m # CONFIG_HID_CHICONY is not set # CONFIG_HID_CYPRESS is not set -# CONFIG_DRAGONRISE_FF is not set -# CONFIG_HID_EZKEY is not set +# CONFIG_HID_DRAGONRISE is not set +CONFIG_HID_EZKEY=m # CONFIG_HID_KYE is not set # CONFIG_HID_GYRATION is not set # CONFIG_HID_KENSINGTON is not set -# CONFIG_HID_LOGITECH is not set -# CONFIG_HID_MICROSOFT is not set +CONFIG_HID_LOGITECH=m +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=m # CONFIG_HID_MONTEREY is not set # CONFIG_HID_NTRIG is not set # CONFIG_HID_PANTHERLORD is not set # CONFIG_HID_PETALYNX is not set # CONFIG_HID_SAMSUNG is not set CONFIG_HID_SONY=m -# CONFIG_HID_SUNPLUS is not set -# CONFIG_GREENASIA_FF is not set +CONFIG_HID_SUNPLUS=m +# CONFIG_HID_GREENASIA is not set +CONFIG_HID_SMARTJOYPLUS=m +# CONFIG_SMARTJOYPLUS_FF is not set # CONFIG_HID_TOPSEED is not set -# CONFIG_THRUSTMASTER_FF is not set -# CONFIG_ZEROPLUS_FF is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_WACOM is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -988,6 +931,8 @@ CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=m +# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set +# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set # CONFIG_USB_OHCI_HCD_PPC_OF is not set # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y @@ -1115,6 +1060,10 @@ CONFIG_RTC_DRV_PS3=m # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1141,11 +1090,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1205,7 +1155,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1222,6 +1171,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1359,7 +1309,6 @@ CONFIG_DEBUG_MEMORY_INIT=y CONFIG_DEBUG_LIST=y # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -1374,31 +1323,21 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_TRACING=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_FTRACE is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 CONFIG_DEBUG_STACKOVERFLOW=y # CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set diff --git a/arch/powerpc/include/asm/agp.h b/arch/powerpc/include/asm/agp.h index 86455c4c31ee..416e12c2d505 100644 --- a/arch/powerpc/include/asm/agp.h +++ b/arch/powerpc/include/asm/agp.h @@ -8,10 +8,6 @@ #define unmap_page_from_agp(page) #define flush_agp_cache() mb() -/* Convert a physical address to an address suitable for the GART. */ -#define phys_to_gart(x) (x) -#define gart_to_phys(x) (x) - /* GATT allocation. Returns/accepts GATT kernel virtual address. */ #define alloc_gatt_pages(order) \ ((char *)__get_free_pages(GFP_KERNEL, (order))) diff --git a/arch/powerpc/include/asm/bitops.h b/arch/powerpc/include/asm/bitops.h index 897eade3afbe..56f2f2ea5631 100644 --- a/arch/powerpc/include/asm/bitops.h +++ b/arch/powerpc/include/asm/bitops.h @@ -56,174 +56,102 @@ #define BITOP_WORD(nr) ((nr) / BITS_PER_LONG) #define BITOP_LE_SWIZZLE ((BITS_PER_LONG-1) & ~0x7) +/* Macro for generating the ***_bits() functions */ +#define DEFINE_BITOP(fn, op, prefix, postfix) \ +static __inline__ void fn(unsigned long mask, \ + volatile unsigned long *_p) \ +{ \ + unsigned long old; \ + unsigned long *p = (unsigned long *)_p; \ + __asm__ __volatile__ ( \ + prefix \ +"1:" PPC_LLARX "%0,0,%3\n" \ + stringify_in_c(op) "%0,%0,%2\n" \ + PPC405_ERR77(0,%3) \ + PPC_STLCX "%0,0,%3\n" \ + "bne- 1b\n" \ + postfix \ + : "=&r" (old), "+m" (*p) \ + : "r" (mask), "r" (p) \ + : "cc", "memory"); \ +} + +DEFINE_BITOP(set_bits, or, "", "") +DEFINE_BITOP(clear_bits, andc, "", "") +DEFINE_BITOP(clear_bits_unlock, andc, LWSYNC_ON_SMP, "") +DEFINE_BITOP(change_bits, xor, "", "") + static __inline__ void set_bit(int nr, volatile unsigned long *addr) { - unsigned long old; - unsigned long mask = BITOP_MASK(nr); - unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); - - __asm__ __volatile__( -"1:" PPC_LLARX "%0,0,%3 # set_bit\n" - "or %0,%0,%2\n" - PPC405_ERR77(0,%3) - PPC_STLCX "%0,0,%3\n" - "bne- 1b" - : "=&r" (old), "+m" (*p) - : "r" (mask), "r" (p) - : "cc" ); + set_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr)); } static __inline__ void clear_bit(int nr, volatile unsigned long *addr) { - unsigned long old; - unsigned long mask = BITOP_MASK(nr); - unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); - - __asm__ __volatile__( -"1:" PPC_LLARX "%0,0,%3 # clear_bit\n" - "andc %0,%0,%2\n" - PPC405_ERR77(0,%3) - PPC_STLCX "%0,0,%3\n" - "bne- 1b" - : "=&r" (old), "+m" (*p) - : "r" (mask), "r" (p) - : "cc" ); + clear_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr)); } static __inline__ void clear_bit_unlock(int nr, volatile unsigned long *addr) { - unsigned long old; - unsigned long mask = BITOP_MASK(nr); - unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); - - __asm__ __volatile__( - LWSYNC_ON_SMP -"1:" PPC_LLARX "%0,0,%3 # clear_bit_unlock\n" - "andc %0,%0,%2\n" - PPC405_ERR77(0,%3) - PPC_STLCX "%0,0,%3\n" - "bne- 1b" - : "=&r" (old), "+m" (*p) - : "r" (mask), "r" (p) - : "cc", "memory"); + clear_bits_unlock(BITOP_MASK(nr), addr + BITOP_WORD(nr)); } static __inline__ void change_bit(int nr, volatile unsigned long *addr) { - unsigned long old; - unsigned long mask = BITOP_MASK(nr); - unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); - - __asm__ __volatile__( -"1:" PPC_LLARX "%0,0,%3 # change_bit\n" - "xor %0,%0,%2\n" - PPC405_ERR77(0,%3) - PPC_STLCX "%0,0,%3\n" - "bne- 1b" - : "=&r" (old), "+m" (*p) - : "r" (mask), "r" (p) - : "cc" ); + change_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr)); +} + +/* Like DEFINE_BITOP(), with changes to the arguments to 'op' and the output + * operands. */ +#define DEFINE_TESTOP(fn, op, prefix, postfix) \ +static __inline__ unsigned long fn( \ + unsigned long mask, \ + volatile unsigned long *_p) \ +{ \ + unsigned long old, t; \ + unsigned long *p = (unsigned long *)_p; \ + __asm__ __volatile__ ( \ + prefix \ +"1:" PPC_LLARX "%0,0,%3\n" \ + stringify_in_c(op) "%1,%0,%2\n" \ + PPC405_ERR77(0,%3) \ + PPC_STLCX "%1,0,%3\n" \ + "bne- 1b\n" \ + postfix \ + : "=&r" (old), "=&r" (t) \ + : "r" (mask), "r" (p) \ + : "cc", "memory"); \ + return (old & mask); \ } +DEFINE_TESTOP(test_and_set_bits, or, LWSYNC_ON_SMP, ISYNC_ON_SMP) +DEFINE_TESTOP(test_and_set_bits_lock, or, "", ISYNC_ON_SMP) +DEFINE_TESTOP(test_and_clear_bits, andc, LWSYNC_ON_SMP, ISYNC_ON_SMP) +DEFINE_TESTOP(test_and_change_bits, xor, LWSYNC_ON_SMP, ISYNC_ON_SMP) + static __inline__ int test_and_set_bit(unsigned long nr, volatile unsigned long *addr) { - unsigned long old, t; - unsigned long mask = BITOP_MASK(nr); - unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); - - __asm__ __volatile__( - LWSYNC_ON_SMP -"1:" PPC_LLARX "%0,0,%3 # test_and_set_bit\n" - "or %1,%0,%2 \n" - PPC405_ERR77(0,%3) - PPC_STLCX "%1,0,%3 \n" - "bne- 1b" - ISYNC_ON_SMP - : "=&r" (old), "=&r" (t) - : "r" (mask), "r" (p) - : "cc", "memory"); - - return (old & mask) != 0; + return test_and_set_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr)) != 0; } static __inline__ int test_and_set_bit_lock(unsigned long nr, volatile unsigned long *addr) { - unsigned long old, t; - unsigned long mask = BITOP_MASK(nr); - unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); - - __asm__ __volatile__( -"1:" PPC_LLARX "%0,0,%3 # test_and_set_bit_lock\n" - "or %1,%0,%2 \n" - PPC405_ERR77(0,%3) - PPC_STLCX "%1,0,%3 \n" - "bne- 1b" - ISYNC_ON_SMP - : "=&r" (old), "=&r" (t) - : "r" (mask), "r" (p) - : "cc", "memory"); - - return (old & mask) != 0; + return test_and_set_bits_lock(BITOP_MASK(nr), + addr + BITOP_WORD(nr)) != 0; } static __inline__ int test_and_clear_bit(unsigned long nr, volatile unsigned long *addr) { - unsigned long old, t; - unsigned long mask = BITOP_MASK(nr); - unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); - - __asm__ __volatile__( - LWSYNC_ON_SMP -"1:" PPC_LLARX "%0,0,%3 # test_and_clear_bit\n" - "andc %1,%0,%2 \n" - PPC405_ERR77(0,%3) - PPC_STLCX "%1,0,%3 \n" - "bne- 1b" - ISYNC_ON_SMP - : "=&r" (old), "=&r" (t) - : "r" (mask), "r" (p) - : "cc", "memory"); - - return (old & mask) != 0; + return test_and_clear_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr)) != 0; } static __inline__ int test_and_change_bit(unsigned long nr, volatile unsigned long *addr) { - unsigned long old, t; - unsigned long mask = BITOP_MASK(nr); - unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); - - __asm__ __volatile__( - LWSYNC_ON_SMP -"1:" PPC_LLARX "%0,0,%3 # test_and_change_bit\n" - "xor %1,%0,%2 \n" - PPC405_ERR77(0,%3) - PPC_STLCX "%1,0,%3 \n" - "bne- 1b" - ISYNC_ON_SMP - : "=&r" (old), "=&r" (t) - : "r" (mask), "r" (p) - : "cc", "memory"); - - return (old & mask) != 0; -} - -static __inline__ void set_bits(unsigned long mask, unsigned long *addr) -{ - unsigned long old; - - __asm__ __volatile__( -"1:" PPC_LLARX "%0,0,%3 # set_bits\n" - "or %0,%0,%2\n" - PPC_STLCX "%0,0,%3\n" - "bne- 1b" - : "=&r" (old), "+m" (*addr) - : "r" (mask), "r" (addr) - : "cc"); + return test_and_change_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr)) != 0; } #include <asm-generic/bitops/non-atomic.h> diff --git a/arch/powerpc/include/asm/cell-regs.h b/arch/powerpc/include/asm/cell-regs.h index fd6fd00434ef..fdf64fd25950 100644 --- a/arch/powerpc/include/asm/cell-regs.h +++ b/arch/powerpc/include/asm/cell-regs.h @@ -303,6 +303,17 @@ struct cbe_mic_tm_regs { extern struct cbe_mic_tm_regs __iomem *cbe_get_mic_tm_regs(struct device_node *np); extern struct cbe_mic_tm_regs __iomem *cbe_get_cpu_mic_tm_regs(int cpu); + +/* Cell page table entries */ +#define CBE_IOPTE_PP_W 0x8000000000000000ul /* protection: write */ +#define CBE_IOPTE_PP_R 0x4000000000000000ul /* protection: read */ +#define CBE_IOPTE_M 0x2000000000000000ul /* coherency required */ +#define CBE_IOPTE_SO_R 0x1000000000000000ul /* ordering: writes */ +#define CBE_IOPTE_SO_RW 0x1800000000000000ul /* ordering: r & w */ +#define CBE_IOPTE_RPN_Mask 0x07fffffffffff000ul /* RPN */ +#define CBE_IOPTE_H 0x0000000000000800ul /* cache hint */ +#define CBE_IOPTE_IOID_Mask 0x00000000000007fful /* ioid */ + /* some utility functions to deal with SMT */ extern u32 cbe_get_hw_thread_id(int cpu); extern u32 cbe_cpu_to_node(int cpu); diff --git a/arch/powerpc/include/asm/cputhreads.h b/arch/powerpc/include/asm/cputhreads.h index fb11b0c459b8..a8e18447c62b 100644 --- a/arch/powerpc/include/asm/cputhreads.h +++ b/arch/powerpc/include/asm/cputhreads.h @@ -5,6 +5,15 @@ /* * Mapping of threads to cores + * + * Note: This implementation is limited to a power of 2 number of + * threads per core and the same number for each core in the system + * (though it would work if some processors had less threads as long + * as the CPU numbers are still allocated, just not brought offline). + * + * However, the API allows for a different implementation in the future + * if needed, as long as you only use the functions and not the variables + * directly. */ #ifdef CONFIG_SMP @@ -67,5 +76,12 @@ static inline int cpu_first_thread_in_core(int cpu) return cpu & ~(threads_per_core - 1); } +static inline int cpu_last_thread_in_core(int cpu) +{ + return cpu | (threads_per_core - 1); +} + + + #endif /* _ASM_POWERPC_CPUTHREADS_H */ diff --git a/arch/powerpc/include/asm/device.h b/arch/powerpc/include/asm/device.h index 7d2277cef09a..9dade15d1ab4 100644 --- a/arch/powerpc/include/asm/device.h +++ b/arch/powerpc/include/asm/device.h @@ -6,7 +6,7 @@ #ifndef _ASM_POWERPC_DEVICE_H #define _ASM_POWERPC_DEVICE_H -struct dma_mapping_ops; +struct dma_map_ops; struct device_node; struct dev_archdata { @@ -14,8 +14,11 @@ struct dev_archdata { struct device_node *of_node; /* DMA operations on that device */ - struct dma_mapping_ops *dma_ops; + struct dma_map_ops *dma_ops; void *dma_data; +#ifdef CONFIG_SWIOTLB + dma_addr_t max_direct_dma_addr; +#endif }; static inline void dev_archdata_set_node(struct dev_archdata *ad, @@ -30,4 +33,7 @@ dev_archdata_get_node(const struct dev_archdata *ad) return ad->of_node; } +struct pdev_archdata { +}; + #endif /* _ASM_POWERPC_DEVICE_H */ diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h index b44aaabdd1a6..cb2ca41dd526 100644 --- a/arch/powerpc/include/asm/dma-mapping.h +++ b/arch/powerpc/include/asm/dma-mapping.h @@ -14,6 +14,7 @@ #include <linux/mm.h> #include <linux/scatterlist.h> #include <linux/dma-attrs.h> +#include <linux/dma-debug.h> #include <asm/io.h> #include <asm/swiotlb.h> @@ -64,58 +65,14 @@ static inline unsigned long device_to_mask(struct device *dev) } /* - * DMA operations are abstracted for G5 vs. i/pSeries, PCI vs. VIO - */ -struct dma_mapping_ops { - void * (*alloc_coherent)(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag); - void (*free_coherent)(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle); - int (*map_sg)(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction direction, - struct dma_attrs *attrs); - void (*unmap_sg)(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction direction, - struct dma_attrs *attrs); - int (*dma_supported)(struct device *dev, u64 mask); - int (*set_dma_mask)(struct device *dev, u64 dma_mask); - dma_addr_t (*map_page)(struct device *dev, struct page *page, - unsigned long offset, size_t size, - enum dma_data_direction direction, - struct dma_attrs *attrs); - void (*unmap_page)(struct device *dev, - dma_addr_t dma_address, size_t size, - enum dma_data_direction direction, - struct dma_attrs *attrs); - int (*addr_needs_map)(struct device *dev, dma_addr_t addr, - size_t size); -#ifdef CONFIG_PPC_NEED_DMA_SYNC_OPS - void (*sync_single_range_for_cpu)(struct device *hwdev, - dma_addr_t dma_handle, unsigned long offset, - size_t size, - enum dma_data_direction direction); - void (*sync_single_range_for_device)(struct device *hwdev, - dma_addr_t dma_handle, unsigned long offset, - size_t size, - enum dma_data_direction direction); - void (*sync_sg_for_cpu)(struct device *hwdev, - struct scatterlist *sg, int nelems, - enum dma_data_direction direction); - void (*sync_sg_for_device)(struct device *hwdev, - struct scatterlist *sg, int nelems, - enum dma_data_direction direction); -#endif -}; - -/* * Available generic sets of operations */ #ifdef CONFIG_PPC64 -extern struct dma_mapping_ops dma_iommu_ops; +extern struct dma_map_ops dma_iommu_ops; #endif -extern struct dma_mapping_ops dma_direct_ops; +extern struct dma_map_ops dma_direct_ops; -static inline struct dma_mapping_ops *get_dma_ops(struct device *dev) +static inline struct dma_map_ops *get_dma_ops(struct device *dev) { /* We don't handle the NULL dev case for ISA for now. We could * do it via an out of line call but it is not needed for now. The @@ -128,14 +85,19 @@ static inline struct dma_mapping_ops *get_dma_ops(struct device *dev) return dev->archdata.dma_ops; } -static inline void set_dma_ops(struct device *dev, struct dma_mapping_ops *ops) +static inline void set_dma_ops(struct device *dev, struct dma_map_ops *ops) { dev->archdata.dma_ops = ops; } +/* this will be removed soon */ +#define flush_write_buffers() + +#include <asm-generic/dma-mapping-common.h> + static inline int dma_supported(struct device *dev, u64 mask) { - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + struct dma_map_ops *dma_ops = get_dma_ops(dev); if (unlikely(dma_ops == NULL)) return 0; @@ -149,7 +111,7 @@ static inline int dma_supported(struct device *dev, u64 mask) static inline int dma_set_mask(struct device *dev, u64 dma_mask) { - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + struct dma_map_ops *dma_ops = get_dma_ops(dev); if (unlikely(dma_ops == NULL)) return -EIO; @@ -161,267 +123,70 @@ static inline int dma_set_mask(struct device *dev, u64 dma_mask) return 0; } -/* - * map_/unmap_single actually call through to map/unmap_page now that all the - * dma_mapping_ops have been converted over. We just have to get the page and - * offset to pass through to map_page - */ -static inline dma_addr_t dma_map_single_attrs(struct device *dev, - void *cpu_addr, - size_t size, - enum dma_data_direction direction, - struct dma_attrs *attrs) -{ - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - - return dma_ops->map_page(dev, virt_to_page(cpu_addr), - (unsigned long)cpu_addr % PAGE_SIZE, size, - direction, attrs); -} - -static inline void dma_unmap_single_attrs(struct device *dev, - dma_addr_t dma_addr, - size_t size, - enum dma_data_direction direction, - struct dma_attrs *attrs) -{ - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - - dma_ops->unmap_page(dev, dma_addr, size, direction, attrs); -} - -static inline dma_addr_t dma_map_page_attrs(struct device *dev, - struct page *page, - unsigned long offset, size_t size, - enum dma_data_direction direction, - struct dma_attrs *attrs) -{ - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - - return dma_ops->map_page(dev, page, offset, size, direction, attrs); -} - -static inline void dma_unmap_page_attrs(struct device *dev, - dma_addr_t dma_address, - size_t size, - enum dma_data_direction direction, - struct dma_attrs *attrs) -{ - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - - dma_ops->unmap_page(dev, dma_address, size, direction, attrs); -} - -static inline int dma_map_sg_attrs(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction direction, - struct dma_attrs *attrs) -{ - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - return dma_ops->map_sg(dev, sg, nents, direction, attrs); -} - -static inline void dma_unmap_sg_attrs(struct device *dev, - struct scatterlist *sg, - int nhwentries, - enum dma_data_direction direction, - struct dma_attrs *attrs) -{ - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - dma_ops->unmap_sg(dev, sg, nhwentries, direction, attrs); -} - static inline void *dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flag) { - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - return dma_ops->alloc_coherent(dev, size, dma_handle, flag); -} - -static inline void dma_free_coherent(struct device *dev, size_t size, - void *cpu_addr, dma_addr_t dma_handle) -{ - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - dma_ops->free_coherent(dev, size, cpu_addr, dma_handle); -} - -static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr, - size_t size, - enum dma_data_direction direction) -{ - return dma_map_single_attrs(dev, cpu_addr, size, direction, NULL); -} - -static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, - size_t size, - enum dma_data_direction direction) -{ - dma_unmap_single_attrs(dev, dma_addr, size, direction, NULL); -} - -static inline dma_addr_t dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - return dma_map_page_attrs(dev, page, offset, size, direction, NULL); -} - -static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address, - size_t size, - enum dma_data_direction direction) -{ - dma_unmap_page_attrs(dev, dma_address, size, direction, NULL); -} - -static inline int dma_map_sg(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction direction) -{ - return dma_map_sg_attrs(dev, sg, nents, direction, NULL); -} - -static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg, - int nhwentries, - enum dma_data_direction direction) -{ - dma_unmap_sg_attrs(dev, sg, nhwentries, direction, NULL); -} - -#ifdef CONFIG_PPC_NEED_DMA_SYNC_OPS -static inline void dma_sync_single_for_cpu(struct device *dev, - dma_addr_t dma_handle, size_t size, - enum dma_data_direction direction) -{ - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - - if (dma_ops->sync_single_range_for_cpu) - dma_ops->sync_single_range_for_cpu(dev, dma_handle, 0, - size, direction); -} - -static inline void dma_sync_single_for_device(struct device *dev, - dma_addr_t dma_handle, size_t size, - enum dma_data_direction direction) -{ - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + struct dma_map_ops *dma_ops = get_dma_ops(dev); + void *cpu_addr; BUG_ON(!dma_ops); - if (dma_ops->sync_single_range_for_device) - dma_ops->sync_single_range_for_device(dev, dma_handle, - 0, size, direction); -} - -static inline void dma_sync_sg_for_cpu(struct device *dev, - struct scatterlist *sgl, int nents, - enum dma_data_direction direction) -{ - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + cpu_addr = dma_ops->alloc_coherent(dev, size, dma_handle, flag); - BUG_ON(!dma_ops); + debug_dma_alloc_coherent(dev, size, *dma_handle, cpu_addr); - if (dma_ops->sync_sg_for_cpu) - dma_ops->sync_sg_for_cpu(dev, sgl, nents, direction); + return cpu_addr; } -static inline void dma_sync_sg_for_device(struct device *dev, - struct scatterlist *sgl, int nents, - enum dma_data_direction direction) +static inline void dma_free_coherent(struct device *dev, size_t size, + void *cpu_addr, dma_addr_t dma_handle) { - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + struct dma_map_ops *dma_ops = get_dma_ops(dev); BUG_ON(!dma_ops); - if (dma_ops->sync_sg_for_device) - dma_ops->sync_sg_for_device(dev, sgl, nents, direction); -} - -static inline void dma_sync_single_range_for_cpu(struct device *dev, - dma_addr_t dma_handle, unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); + debug_dma_free_coherent(dev, size, cpu_addr, dma_handle); - if (dma_ops->sync_single_range_for_cpu) - dma_ops->sync_single_range_for_cpu(dev, dma_handle, - offset, size, direction); + dma_ops->free_coherent(dev, size, cpu_addr, dma_handle); } -static inline void dma_sync_single_range_for_device(struct device *dev, - dma_addr_t dma_handle, unsigned long offset, size_t size, - enum dma_data_direction direction) +static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) { - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + struct dma_map_ops *dma_ops = get_dma_ops(dev); - BUG_ON(!dma_ops); + if (dma_ops->mapping_error) + return dma_ops->mapping_error(dev, dma_addr); - if (dma_ops->sync_single_range_for_device) - dma_ops->sync_single_range_for_device(dev, dma_handle, offset, - size, direction); -} -#else /* CONFIG_PPC_NEED_DMA_SYNC_OPS */ -static inline void dma_sync_single_for_cpu(struct device *dev, - dma_addr_t dma_handle, size_t size, - enum dma_data_direction direction) -{ +#ifdef CONFIG_PPC64 + return (dma_addr == DMA_ERROR_CODE); +#else + return 0; +#endif } -static inline void dma_sync_single_for_device(struct device *dev, - dma_addr_t dma_handle, size_t size, - enum dma_data_direction direction) +static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size) { -} +#ifdef CONFIG_SWIOTLB + struct dev_archdata *sd = &dev->archdata; -static inline void dma_sync_sg_for_cpu(struct device *dev, - struct scatterlist *sgl, int nents, - enum dma_data_direction direction) -{ -} + if (sd->max_direct_dma_addr && addr + size > sd->max_direct_dma_addr) + return 0; +#endif -static inline void dma_sync_sg_for_device(struct device *dev, - struct scatterlist *sgl, int nents, - enum dma_data_direction direction) -{ -} + if (!dev->dma_mask) + return 0; -static inline void dma_sync_single_range_for_cpu(struct device *dev, - dma_addr_t dma_handle, unsigned long offset, size_t size, - enum dma_data_direction direction) -{ + return addr + size <= *dev->dma_mask; } -static inline void dma_sync_single_range_for_device(struct device *dev, - dma_addr_t dma_handle, unsigned long offset, size_t size, - enum dma_data_direction direction) +static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr) { + return paddr + get_dma_direct_offset(dev); } -#endif -static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) +static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr) { -#ifdef CONFIG_PPC64 - return (dma_addr == DMA_ERROR_CODE); -#else - return 0; -#endif + return daddr - get_dma_direct_offset(dev); } #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) diff --git a/arch/powerpc/include/asm/exception-64e.h b/arch/powerpc/include/asm/exception-64e.h new file mode 100644 index 000000000000..6d53f311d942 --- /dev/null +++ b/arch/powerpc/include/asm/exception-64e.h @@ -0,0 +1,205 @@ +/* + * Definitions for use by exception code on Book3-E + * + * Copyright (C) 2008 Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_POWERPC_EXCEPTION_64E_H +#define _ASM_POWERPC_EXCEPTION_64E_H + +/* + * SPRGs usage an other considerations... + * + * Since TLB miss and other standard exceptions can be interrupted by + * critical exceptions which can themselves be interrupted by machine + * checks, and since the two later can themselves cause a TLB miss when + * hitting the linear mapping for the kernel stacks, we need to be a bit + * creative on how we use SPRGs. + * + * The base idea is that we have one SRPG reserved for critical and one + * for machine check interrupts. Those are used to save a GPR that can + * then be used to get the PACA, and store as much context as we need + * to save in there. That includes saving the SPRGs used by the TLB miss + * handler for linear mapping misses and the associated SRR0/1 due to + * the above re-entrancy issue. + * + * So here's the current usage pattern. It's done regardless of which + * SPRGs are user-readable though, thus we might have to change some of + * this later. In order to do that more easily, we use special constants + * for naming them + * + * WARNING: Some of these SPRGs are user readable. We need to do something + * about it as some point by making sure they can't be used to leak kernel + * critical data + */ + + +/* We are out of SPRGs so we save some things in the PACA. The normal + * exception frame is smaller than the CRIT or MC one though + */ +#define EX_R1 (0 * 8) +#define EX_CR (1 * 8) +#define EX_R10 (2 * 8) +#define EX_R11 (3 * 8) +#define EX_R14 (4 * 8) +#define EX_R15 (5 * 8) + +/* The TLB miss exception uses different slots */ + +#define EX_TLB_R10 ( 0 * 8) +#define EX_TLB_R11 ( 1 * 8) +#define EX_TLB_R12 ( 2 * 8) +#define EX_TLB_R13 ( 3 * 8) +#define EX_TLB_R14 ( 4 * 8) +#define EX_TLB_R15 ( 5 * 8) +#define EX_TLB_R16 ( 6 * 8) +#define EX_TLB_CR ( 7 * 8) +#define EX_TLB_DEAR ( 8 * 8) /* Level 0 and 2 only */ +#define EX_TLB_ESR ( 9 * 8) /* Level 0 and 2 only */ +#define EX_TLB_SRR0 (10 * 8) +#define EX_TLB_SRR1 (11 * 8) +#define EX_TLB_MMUCR0 (12 * 8) /* Level 0 */ +#define EX_TLB_MAS1 (12 * 8) /* Level 0 */ +#define EX_TLB_MAS2 (13 * 8) /* Level 0 */ +#ifdef CONFIG_BOOK3E_MMU_TLB_STATS +#define EX_TLB_R8 (14 * 8) +#define EX_TLB_R9 (15 * 8) +#define EX_TLB_LR (16 * 8) +#define EX_TLB_SIZE (17 * 8) +#else +#define EX_TLB_SIZE (14 * 8) +#endif + +#define START_EXCEPTION(label) \ + .globl exc_##label##_book3e; \ +exc_##label##_book3e: + +/* TLB miss exception prolog + * + * This prolog handles re-entrancy (up to 3 levels supported in the PACA + * though we currently don't test for overflow). It provides you with a + * re-entrancy safe working space of r10...r16 and CR with r12 being used + * as the exception area pointer in the PACA for that level of re-entrancy + * and r13 containing the PACA pointer. + * + * SRR0 and SRR1 are saved, but DEAR and ESR are not, since they don't apply + * as-is for instruction exceptions. It's up to the actual exception code + * to save them as well if required. + */ +#define TLB_MISS_PROLOG \ + mtspr SPRN_SPRG_TLB_SCRATCH,r12; \ + mfspr r12,SPRN_SPRG_TLB_EXFRAME; \ + std r10,EX_TLB_R10(r12); \ + mfcr r10; \ + std r11,EX_TLB_R11(r12); \ + mfspr r11,SPRN_SPRG_TLB_SCRATCH; \ + std r13,EX_TLB_R13(r12); \ + mfspr r13,SPRN_SPRG_PACA; \ + std r14,EX_TLB_R14(r12); \ + addi r14,r12,EX_TLB_SIZE; \ + std r15,EX_TLB_R15(r12); \ + mfspr r15,SPRN_SRR1; \ + std r16,EX_TLB_R16(r12); \ + mfspr r16,SPRN_SRR0; \ + std r10,EX_TLB_CR(r12); \ + std r11,EX_TLB_R12(r12); \ + mtspr SPRN_SPRG_TLB_EXFRAME,r14; \ + std r15,EX_TLB_SRR1(r12); \ + std r16,EX_TLB_SRR0(r12); \ + TLB_MISS_PROLOG_STATS + +/* And these are the matching epilogs that restores things + * + * There are 3 epilogs: + * + * - SUCCESS : Unwinds one level + * - ERROR : restore from level 0 and reset + * - ERROR_SPECIAL : restore from current level and reset + * + * Normal errors use ERROR, that is, they restore the initial fault context + * and trigger a fault. However, there is a special case for linear mapping + * errors. Those should basically never happen, but if they do happen, we + * want the error to point out the context that did that linear mapping + * fault, not the initial level 0 (basically, we got a bogus PGF or something + * like that). For userland errors on the linear mapping, there is no + * difference since those are always level 0 anyway + */ + +#define TLB_MISS_RESTORE(freg) \ + ld r14,EX_TLB_CR(r12); \ + ld r10,EX_TLB_R10(r12); \ + ld r15,EX_TLB_SRR0(r12); \ + ld r16,EX_TLB_SRR1(r12); \ + mtspr SPRN_SPRG_TLB_EXFRAME,freg; \ + ld r11,EX_TLB_R11(r12); \ + mtcr r14; \ + ld r13,EX_TLB_R13(r12); \ + ld r14,EX_TLB_R14(r12); \ + mtspr SPRN_SRR0,r15; \ + ld r15,EX_TLB_R15(r12); \ + mtspr SPRN_SRR1,r16; \ + TLB_MISS_RESTORE_STATS \ + ld r16,EX_TLB_R16(r12); \ + ld r12,EX_TLB_R12(r12); \ + +#define TLB_MISS_EPILOG_SUCCESS \ + TLB_MISS_RESTORE(r12) + +#define TLB_MISS_EPILOG_ERROR \ + addi r12,r13,PACA_EXTLB; \ + TLB_MISS_RESTORE(r12) + +#define TLB_MISS_EPILOG_ERROR_SPECIAL \ + addi r11,r13,PACA_EXTLB; \ + TLB_MISS_RESTORE(r11) + +#ifdef CONFIG_BOOK3E_MMU_TLB_STATS +#define TLB_MISS_PROLOG_STATS \ + mflr r10; \ + std r8,EX_TLB_R8(r12); \ + std r9,EX_TLB_R9(r12); \ + std r10,EX_TLB_LR(r12); +#define TLB_MISS_RESTORE_STATS \ + ld r16,EX_TLB_LR(r12); \ + ld r9,EX_TLB_R9(r12); \ + ld r8,EX_TLB_R8(r12); \ + mtlr r16; +#define TLB_MISS_STATS_D(name) \ + addi r9,r13,MMSTAT_DSTATS+name; \ + bl .tlb_stat_inc; +#define TLB_MISS_STATS_I(name) \ + addi r9,r13,MMSTAT_ISTATS+name; \ + bl .tlb_stat_inc; +#define TLB_MISS_STATS_X(name) \ + ld r8,PACA_EXTLB+EX_TLB_ESR(r13); \ + cmpdi cr2,r8,-1; \ + beq cr2,61f; \ + addi r9,r13,MMSTAT_DSTATS+name; \ + b 62f; \ +61: addi r9,r13,MMSTAT_ISTATS+name; \ +62: bl .tlb_stat_inc; +#define TLB_MISS_STATS_SAVE_INFO \ + std r14,EX_TLB_ESR(r12); /* save ESR */ \ + + +#else +#define TLB_MISS_PROLOG_STATS +#define TLB_MISS_RESTORE_STATS +#define TLB_MISS_STATS_D(name) +#define TLB_MISS_STATS_I(name) +#define TLB_MISS_STATS_X(name) +#define TLB_MISS_STATS_Y(name) +#define TLB_MISS_STATS_SAVE_INFO +#endif + +#define SET_IVOR(vector_number, vector_offset) \ + li r3,vector_offset@l; \ + ori r3,r3,interrupt_base_book3e@l; \ + mtspr SPRN_IVOR##vector_number,r3; + +#endif /* _ASM_POWERPC_EXCEPTION_64E_H */ + diff --git a/arch/powerpc/include/asm/exception.h b/arch/powerpc/include/asm/exception-64s.h index d3d4534e3c74..a98653b26231 100644 --- a/arch/powerpc/include/asm/exception.h +++ b/arch/powerpc/include/asm/exception-64s.h @@ -57,17 +57,16 @@ addi reg,reg,(label)-_stext; /* virt addr of handler ... */ #define EXCEPTION_PROLOG_1(area) \ - mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ + mfspr r13,SPRN_SPRG_PACA; /* get paca address into r13 */ \ std r9,area+EX_R9(r13); /* save r9 - r12 */ \ std r10,area+EX_R10(r13); \ std r11,area+EX_R11(r13); \ std r12,area+EX_R12(r13); \ - mfspr r9,SPRN_SPRG1; \ + mfspr r9,SPRN_SPRG_SCRATCH0; \ std r9,area+EX_R13(r13); \ mfcr r9 -#define EXCEPTION_PROLOG_PSERIES(area, label) \ - EXCEPTION_PROLOG_1(area); \ +#define EXCEPTION_PROLOG_PSERIES_1(label) \ ld r12,PACAKBASE(r13); /* get high part of &label */ \ ld r10,PACAKMSR(r13); /* get MSR value for kernel */ \ mfspr r11,SPRN_SRR0; /* save SRR0 */ \ @@ -78,6 +77,10 @@ rfid; \ b . /* prevent speculative execution */ +#define EXCEPTION_PROLOG_PSERIES(area, label) \ + EXCEPTION_PROLOG_1(area); \ + EXCEPTION_PROLOG_PSERIES_1(label); + /* * The common exception prolog is used for all except a few exceptions * such as a segment miss on a kernel address. We have to be prepared @@ -144,7 +147,7 @@ .globl label##_pSeries; \ label##_pSeries: \ HMT_MEDIUM; \ - mtspr SPRN_SPRG1,r13; /* save r13 */ \ + mtspr SPRN_SPRG_SCRATCH0,r13; /* save r13 */ \ EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common) #define HSTD_EXCEPTION_PSERIES(n, label) \ @@ -152,13 +155,13 @@ label##_pSeries: \ .globl label##_pSeries; \ label##_pSeries: \ HMT_MEDIUM; \ - mtspr SPRN_SPRG1,r20; /* save r20 */ \ + mtspr SPRN_SPRG_SCRATCH0,r20; /* save r20 */ \ mfspr r20,SPRN_HSRR0; /* copy HSRR0 to SRR0 */ \ mtspr SPRN_SRR0,r20; \ mfspr r20,SPRN_HSRR1; /* copy HSRR0 to SRR0 */ \ mtspr SPRN_SRR1,r20; \ - mfspr r20,SPRN_SPRG1; /* restore r20 */ \ - mtspr SPRN_SPRG1,r13; /* save r13 */ \ + mfspr r20,SPRN_SPRG_SCRATCH0; /* restore r20 */ \ + mtspr SPRN_SPRG_SCRATCH0,r13; /* save r13 */ \ EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common) @@ -167,15 +170,15 @@ label##_pSeries: \ .globl label##_pSeries; \ label##_pSeries: \ HMT_MEDIUM; \ - mtspr SPRN_SPRG1,r13; /* save r13 */ \ - mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ + mtspr SPRN_SPRG_SCRATCH0,r13; /* save r13 */ \ + mfspr r13,SPRN_SPRG_PACA; /* get paca address into r13 */ \ std r9,PACA_EXGEN+EX_R9(r13); /* save r9, r10 */ \ std r10,PACA_EXGEN+EX_R10(r13); \ lbz r10,PACASOFTIRQEN(r13); \ mfcr r9; \ cmpwi r10,0; \ beq masked_interrupt; \ - mfspr r10,SPRN_SPRG1; \ + mfspr r10,SPRN_SPRG_SCRATCH0; \ std r10,PACA_EXGEN+EX_R13(r13); \ std r11,PACA_EXGEN+EX_R11(r13); \ std r12,PACA_EXGEN+EX_R12(r13); \ diff --git a/arch/powerpc/include/asm/hardirq.h b/arch/powerpc/include/asm/hardirq.h index 288e14d53b7f..fb3c05a0cbbf 100644 --- a/arch/powerpc/include/asm/hardirq.h +++ b/arch/powerpc/include/asm/hardirq.h @@ -1,29 +1 @@ -#ifndef _ASM_POWERPC_HARDIRQ_H -#define _ASM_POWERPC_HARDIRQ_H -#ifdef __KERNEL__ - -#include <asm/irq.h> -#include <asm/bug.h> - -/* The __last_jiffy_stamp field is needed to ensure that no decrementer - * interrupt is lost on SMP machines. Since on most CPUs it is in the same - * cache line as local_irq_count, it is cheap to access and is also used on UP - * for uniformity. - */ -typedef struct { - unsigned int __softirq_pending; /* set_bit is used on this */ - unsigned int __last_jiffy_stamp; -} ____cacheline_aligned irq_cpustat_t; - -#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */ - -#define last_jiffy_stamp(cpu) __IRQ_STAT((cpu), __last_jiffy_stamp) - -static inline void ack_bad_irq(int irq) -{ - printk(KERN_CRIT "illegal vector %d received!\n", irq); - BUG(); -} - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_HARDIRQ_H */ +#include <asm-generic/hardirq.h> diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h index 8b505eaaa38a..abbc2aaaced5 100644 --- a/arch/powerpc/include/asm/hw_irq.h +++ b/arch/powerpc/include/asm/hw_irq.h @@ -49,8 +49,13 @@ extern void iseries_handle_interrupts(void); #define raw_irqs_disabled() (local_get_flags() == 0) #define raw_irqs_disabled_flags(flags) ((flags) == 0) +#ifdef CONFIG_PPC_BOOK3E +#define __hard_irq_enable() __asm__ __volatile__("wrteei 1": : :"memory"); +#define __hard_irq_disable() __asm__ __volatile__("wrteei 0": : :"memory"); +#else #define __hard_irq_enable() __mtmsrd(mfmsr() | MSR_EE, 1) #define __hard_irq_disable() __mtmsrd(mfmsr() & ~MSR_EE, 1) +#endif #define hard_irq_disable() \ do { \ @@ -130,43 +135,43 @@ static inline int irqs_disabled_flags(unsigned long flags) */ struct irq_chip; -#ifdef CONFIG_PERF_COUNTERS +#ifdef CONFIG_PERF_EVENTS #ifdef CONFIG_PPC64 -static inline unsigned long test_perf_counter_pending(void) +static inline unsigned long test_perf_event_pending(void) { unsigned long x; asm volatile("lbz %0,%1(13)" : "=r" (x) - : "i" (offsetof(struct paca_struct, perf_counter_pending))); + : "i" (offsetof(struct paca_struct, perf_event_pending))); return x; } -static inline void set_perf_counter_pending(void) +static inline void set_perf_event_pending(void) { asm volatile("stb %0,%1(13)" : : "r" (1), - "i" (offsetof(struct paca_struct, perf_counter_pending))); + "i" (offsetof(struct paca_struct, perf_event_pending))); } -static inline void clear_perf_counter_pending(void) +static inline void clear_perf_event_pending(void) { asm volatile("stb %0,%1(13)" : : "r" (0), - "i" (offsetof(struct paca_struct, perf_counter_pending))); + "i" (offsetof(struct paca_struct, perf_event_pending))); } #endif /* CONFIG_PPC64 */ -#else /* CONFIG_PERF_COUNTERS */ +#else /* CONFIG_PERF_EVENTS */ -static inline unsigned long test_perf_counter_pending(void) +static inline unsigned long test_perf_event_pending(void) { return 0; } -static inline void clear_perf_counter_pending(void) {} -#endif /* CONFIG_PERF_COUNTERS */ +static inline void clear_perf_event_pending(void) {} +#endif /* CONFIG_PERF_EVENTS */ #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_HW_IRQ_H */ diff --git a/arch/powerpc/include/asm/iommu.h b/arch/powerpc/include/asm/iommu.h index 7ead7c16fb7c..7464c0daddd1 100644 --- a/arch/powerpc/include/asm/iommu.h +++ b/arch/powerpc/include/asm/iommu.h @@ -35,16 +35,6 @@ #define IOMMU_PAGE_MASK (~((1 << IOMMU_PAGE_SHIFT) - 1)) #define IOMMU_PAGE_ALIGN(addr) _ALIGN_UP(addr, IOMMU_PAGE_SIZE) -/* Cell page table entries */ -#define CBE_IOPTE_PP_W 0x8000000000000000ul /* protection: write */ -#define CBE_IOPTE_PP_R 0x4000000000000000ul /* protection: read */ -#define CBE_IOPTE_M 0x2000000000000000ul /* coherency required */ -#define CBE_IOPTE_SO_R 0x1000000000000000ul /* ordering: writes */ -#define CBE_IOPTE_SO_RW 0x1800000000000000ul /* ordering: r & w */ -#define CBE_IOPTE_RPN_Mask 0x07fffffffffff000ul /* RPN */ -#define CBE_IOPTE_H 0x0000000000000800ul /* cache hint */ -#define CBE_IOPTE_IOID_Mask 0x00000000000007fful /* ioid */ - /* Boot time flags */ extern int iommu_is_off; extern int iommu_force_on; diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h index 0a5137676e1b..bbcd1aaf3dfd 100644 --- a/arch/powerpc/include/asm/irq.h +++ b/arch/powerpc/include/asm/irq.h @@ -302,7 +302,8 @@ extern void irq_free_virt(unsigned int virq, unsigned int count); /* -- OF helpers -- */ -/* irq_create_of_mapping - Map a hardware interrupt into linux virq space +/** + * irq_create_of_mapping - Map a hardware interrupt into linux virq space * @controller: Device node of the interrupt controller * @inspec: Interrupt specifier from the device-tree * @intsize: Size of the interrupt specifier from the device-tree @@ -314,8 +315,8 @@ extern void irq_free_virt(unsigned int virq, unsigned int count); extern unsigned int irq_create_of_mapping(struct device_node *controller, u32 *intspec, unsigned int intsize); - -/* irq_of_parse_and_map - Parse nad Map an interrupt into linux virq space +/** + * irq_of_parse_and_map - Parse and Map an interrupt into linux virq space * @device: Device node of the device whose interrupt is to be mapped * @index: Index of the interrupt to map * diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h index fddc3ed715fa..c9c930ed11d7 100644 --- a/arch/powerpc/include/asm/kvm_host.h +++ b/arch/powerpc/include/asm/kvm_host.h @@ -34,7 +34,8 @@ #define KVM_COALESCED_MMIO_PAGE_OFFSET 1 /* We don't currently support large pages. */ -#define KVM_PAGES_PER_HPAGE (1UL << 31) +#define KVM_NR_PAGE_SIZES 1 +#define KVM_PAGES_PER_HPAGE(x) (1UL<<31) struct kvm; struct kvm_run; @@ -153,7 +154,6 @@ struct kvm_vcpu_arch { u32 pid; u32 swap_pid; - u32 pvr; u32 ccr0; u32 ccr1; u32 dbcr0; diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h index 11d1fc3a8962..9efa2be78331 100644 --- a/arch/powerpc/include/asm/machdep.h +++ b/arch/powerpc/include/asm/machdep.h @@ -209,14 +209,14 @@ struct machdep_calls { /* * optional PCI "hooks" */ - /* Called in indirect_* to avoid touching devices */ - int (*pci_exclude_device)(struct pci_controller *, unsigned char, unsigned char); - /* Called at then very end of pcibios_init() */ void (*pcibios_after_init)(void); #endif /* CONFIG_PPC32 */ + /* Called in indirect_* to avoid touching devices */ + int (*pci_exclude_device)(struct pci_controller *, unsigned char, unsigned char); + /* Called after PPC generic resource fixup to perform machine specific fixups */ void (*pcibios_fixup_resources)(struct pci_dev *); diff --git a/arch/powerpc/include/asm/mman.h b/arch/powerpc/include/asm/mman.h index 7b1c49811a24..d4a7f645c5db 100644 --- a/arch/powerpc/include/asm/mman.h +++ b/arch/powerpc/include/asm/mman.h @@ -25,6 +25,8 @@ #define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ #define MAP_NONBLOCK 0x10000 /* do not block on IO */ +#define MAP_STACK 0x20000 /* give out an address that is best suited for process/thread stacks */ +#define MAP_HUGETLB 0x40000 /* create a huge page mapping */ #ifdef __KERNEL__ #ifdef CONFIG_PPC64 diff --git a/arch/powerpc/include/asm/mmu-40x.h b/arch/powerpc/include/asm/mmu-40x.h index 776f415a36aa..34916865eaef 100644 --- a/arch/powerpc/include/asm/mmu-40x.h +++ b/arch/powerpc/include/asm/mmu-40x.h @@ -61,4 +61,7 @@ typedef struct { #endif /* !__ASSEMBLY__ */ +#define mmu_virtual_psize MMU_PAGE_4K +#define mmu_linear_psize MMU_PAGE_256M + #endif /* _ASM_POWERPC_MMU_40X_H_ */ diff --git a/arch/powerpc/include/asm/mmu-44x.h b/arch/powerpc/include/asm/mmu-44x.h index 3c86576bfefa..0372669383a8 100644 --- a/arch/powerpc/include/asm/mmu-44x.h +++ b/arch/powerpc/include/asm/mmu-44x.h @@ -79,16 +79,22 @@ typedef struct { #if (PAGE_SHIFT == 12) #define PPC44x_TLBE_SIZE PPC44x_TLB_4K +#define mmu_virtual_psize MMU_PAGE_4K #elif (PAGE_SHIFT == 14) #define PPC44x_TLBE_SIZE PPC44x_TLB_16K +#define mmu_virtual_psize MMU_PAGE_16K #elif (PAGE_SHIFT == 16) #define PPC44x_TLBE_SIZE PPC44x_TLB_64K +#define mmu_virtual_psize MMU_PAGE_64K #elif (PAGE_SHIFT == 18) #define PPC44x_TLBE_SIZE PPC44x_TLB_256K +#define mmu_virtual_psize MMU_PAGE_256K #else #error "Unsupported PAGE_SIZE" #endif +#define mmu_linear_psize MMU_PAGE_256M + #define PPC44x_PGD_OFF_SHIFT (32 - PGDIR_SHIFT + PGD_T_LOG2) #define PPC44x_PGD_OFF_MASK_BIT (PGDIR_SHIFT - PGD_T_LOG2) #define PPC44x_PTE_ADD_SHIFT (32 - PGDIR_SHIFT + PTE_SHIFT + PTE_T_LOG2) diff --git a/arch/powerpc/include/asm/mmu-8xx.h b/arch/powerpc/include/asm/mmu-8xx.h index 07865a357848..3d11d3ce79ec 100644 --- a/arch/powerpc/include/asm/mmu-8xx.h +++ b/arch/powerpc/include/asm/mmu-8xx.h @@ -143,4 +143,7 @@ typedef struct { } mm_context_t; #endif /* !__ASSEMBLY__ */ +#define mmu_virtual_psize MMU_PAGE_4K +#define mmu_linear_psize MMU_PAGE_8M + #endif /* _ASM_POWERPC_MMU_8XX_H_ */ diff --git a/arch/powerpc/include/asm/mmu-book3e.h b/arch/powerpc/include/asm/mmu-book3e.h index 7e74cff81d86..74695816205c 100644 --- a/arch/powerpc/include/asm/mmu-book3e.h +++ b/arch/powerpc/include/asm/mmu-book3e.h @@ -38,58 +38,140 @@ #define BOOK3E_PAGESZ_1TB 30 #define BOOK3E_PAGESZ_2TB 31 -#define MAS0_TLBSEL(x) ((x << 28) & 0x30000000) -#define MAS0_ESEL(x) ((x << 16) & 0x0FFF0000) -#define MAS0_NV(x) ((x) & 0x00000FFF) - -#define MAS1_VALID 0x80000000 -#define MAS1_IPROT 0x40000000 -#define MAS1_TID(x) ((x << 16) & 0x3FFF0000) -#define MAS1_IND 0x00002000 -#define MAS1_TS 0x00001000 -#define MAS1_TSIZE(x) ((x << 7) & 0x00000F80) - -#define MAS2_EPN 0xFFFFF000 -#define MAS2_X0 0x00000040 -#define MAS2_X1 0x00000020 -#define MAS2_W 0x00000010 -#define MAS2_I 0x00000008 -#define MAS2_M 0x00000004 -#define MAS2_G 0x00000002 -#define MAS2_E 0x00000001 +/* MAS registers bit definitions */ + +#define MAS0_TLBSEL(x) ((x << 28) & 0x30000000) +#define MAS0_ESEL(x) ((x << 16) & 0x0FFF0000) +#define MAS0_NV(x) ((x) & 0x00000FFF) +#define MAS0_HES 0x00004000 +#define MAS0_WQ_ALLWAYS 0x00000000 +#define MAS0_WQ_COND 0x00001000 +#define MAS0_WQ_CLR_RSRV 0x00002000 + +#define MAS1_VALID 0x80000000 +#define MAS1_IPROT 0x40000000 +#define MAS1_TID(x) ((x << 16) & 0x3FFF0000) +#define MAS1_IND 0x00002000 +#define MAS1_TS 0x00001000 +#define MAS1_TSIZE_MASK 0x00000f80 +#define MAS1_TSIZE_SHIFT 7 +#define MAS1_TSIZE(x) ((x << MAS1_TSIZE_SHIFT) & MAS1_TSIZE_MASK) + +#define MAS2_EPN 0xFFFFF000 +#define MAS2_X0 0x00000040 +#define MAS2_X1 0x00000020 +#define MAS2_W 0x00000010 +#define MAS2_I 0x00000008 +#define MAS2_M 0x00000004 +#define MAS2_G 0x00000002 +#define MAS2_E 0x00000001 #define MAS2_EPN_MASK(size) (~0 << (size + 10)) #define MAS2_VAL(addr, size, flags) ((addr) & MAS2_EPN_MASK(size) | (flags)) -#define MAS3_RPN 0xFFFFF000 -#define MAS3_U0 0x00000200 -#define MAS3_U1 0x00000100 -#define MAS3_U2 0x00000080 -#define MAS3_U3 0x00000040 -#define MAS3_UX 0x00000020 -#define MAS3_SX 0x00000010 -#define MAS3_UW 0x00000008 -#define MAS3_SW 0x00000004 -#define MAS3_UR 0x00000002 -#define MAS3_SR 0x00000001 - -#define MAS4_TLBSELD(x) MAS0_TLBSEL(x) -#define MAS4_INDD 0x00008000 -#define MAS4_TSIZED(x) MAS1_TSIZE(x) -#define MAS4_X0D 0x00000040 -#define MAS4_X1D 0x00000020 -#define MAS4_WD 0x00000010 -#define MAS4_ID 0x00000008 -#define MAS4_MD 0x00000004 -#define MAS4_GD 0x00000002 -#define MAS4_ED 0x00000001 - -#define MAS6_SPID0 0x3FFF0000 -#define MAS6_SPID1 0x00007FFE -#define MAS6_ISIZE(x) MAS1_TSIZE(x) -#define MAS6_SAS 0x00000001 -#define MAS6_SPID MAS6_SPID0 - -#define MAS7_RPN 0xFFFFFFFF +#define MAS3_RPN 0xFFFFF000 +#define MAS3_U0 0x00000200 +#define MAS3_U1 0x00000100 +#define MAS3_U2 0x00000080 +#define MAS3_U3 0x00000040 +#define MAS3_UX 0x00000020 +#define MAS3_SX 0x00000010 +#define MAS3_UW 0x00000008 +#define MAS3_SW 0x00000004 +#define MAS3_UR 0x00000002 +#define MAS3_SR 0x00000001 +#define MAS3_SPSIZE 0x0000003e +#define MAS3_SPSIZE_SHIFT 1 + +#define MAS4_TLBSELD(x) MAS0_TLBSEL(x) +#define MAS4_INDD 0x00008000 /* Default IND */ +#define MAS4_TSIZED(x) MAS1_TSIZE(x) +#define MAS4_X0D 0x00000040 +#define MAS4_X1D 0x00000020 +#define MAS4_WD 0x00000010 +#define MAS4_ID 0x00000008 +#define MAS4_MD 0x00000004 +#define MAS4_GD 0x00000002 +#define MAS4_ED 0x00000001 +#define MAS4_WIMGED_MASK 0x0000001f /* Default WIMGE */ +#define MAS4_WIMGED_SHIFT 0 +#define MAS4_VLED MAS4_X1D /* Default VLE */ +#define MAS4_ACMD 0x000000c0 /* Default ACM */ +#define MAS4_ACMD_SHIFT 6 +#define MAS4_TSIZED_MASK 0x00000f80 /* Default TSIZE */ +#define MAS4_TSIZED_SHIFT 7 + +#define MAS6_SPID0 0x3FFF0000 +#define MAS6_SPID1 0x00007FFE +#define MAS6_ISIZE(x) MAS1_TSIZE(x) +#define MAS6_SAS 0x00000001 +#define MAS6_SPID MAS6_SPID0 +#define MAS6_SIND 0x00000002 /* Indirect page */ +#define MAS6_SIND_SHIFT 1 +#define MAS6_SPID_MASK 0x3fff0000 +#define MAS6_SPID_SHIFT 16 +#define MAS6_ISIZE_MASK 0x00000f80 +#define MAS6_ISIZE_SHIFT 7 + +#define MAS7_RPN 0xFFFFFFFF + +/* Bit definitions for MMUCSR0 */ +#define MMUCSR0_TLB1FI 0x00000002 /* TLB1 Flash invalidate */ +#define MMUCSR0_TLB0FI 0x00000004 /* TLB0 Flash invalidate */ +#define MMUCSR0_TLB2FI 0x00000040 /* TLB2 Flash invalidate */ +#define MMUCSR0_TLB3FI 0x00000020 /* TLB3 Flash invalidate */ +#define MMUCSR0_TLBFI (MMUCSR0_TLB0FI | MMUCSR0_TLB1FI | \ + MMUCSR0_TLB2FI | MMUCSR0_TLB3FI) +#define MMUCSR0_TLB0PS 0x00000780 /* TLB0 Page Size */ +#define MMUCSR0_TLB1PS 0x00007800 /* TLB1 Page Size */ +#define MMUCSR0_TLB2PS 0x00078000 /* TLB2 Page Size */ +#define MMUCSR0_TLB3PS 0x00780000 /* TLB3 Page Size */ + +/* TLBnCFG encoding */ +#define TLBnCFG_N_ENTRY 0x00000fff /* number of entries */ +#define TLBnCFG_HES 0x00002000 /* HW select supported */ +#define TLBnCFG_IPROT 0x00008000 /* IPROT supported */ +#define TLBnCFG_GTWE 0x00010000 /* Guest can write */ +#define TLBnCFG_IND 0x00020000 /* IND entries supported */ +#define TLBnCFG_PT 0x00040000 /* Can load from page table */ +#define TLBnCFG_ASSOC 0xff000000 /* Associativity */ + +/* TLBnPS encoding */ +#define TLBnPS_4K 0x00000004 +#define TLBnPS_8K 0x00000008 +#define TLBnPS_16K 0x00000010 +#define TLBnPS_32K 0x00000020 +#define TLBnPS_64K 0x00000040 +#define TLBnPS_128K 0x00000080 +#define TLBnPS_256K 0x00000100 +#define TLBnPS_512K 0x00000200 +#define TLBnPS_1M 0x00000400 +#define TLBnPS_2M 0x00000800 +#define TLBnPS_4M 0x00001000 +#define TLBnPS_8M 0x00002000 +#define TLBnPS_16M 0x00004000 +#define TLBnPS_32M 0x00008000 +#define TLBnPS_64M 0x00010000 +#define TLBnPS_128M 0x00020000 +#define TLBnPS_256M 0x00040000 +#define TLBnPS_512M 0x00080000 +#define TLBnPS_1G 0x00100000 +#define TLBnPS_2G 0x00200000 +#define TLBnPS_4G 0x00400000 +#define TLBnPS_8G 0x00800000 +#define TLBnPS_16G 0x01000000 +#define TLBnPS_32G 0x02000000 +#define TLBnPS_64G 0x04000000 +#define TLBnPS_128G 0x08000000 +#define TLBnPS_256G 0x10000000 + +/* tlbilx action encoding */ +#define TLBILX_T_ALL 0 +#define TLBILX_T_TID 1 +#define TLBILX_T_FULLMATCH 3 +#define TLBILX_T_CLASS0 4 +#define TLBILX_T_CLASS1 5 +#define TLBILX_T_CLASS2 6 +#define TLBILX_T_CLASS3 7 #ifndef __ASSEMBLY__ @@ -100,6 +182,34 @@ typedef struct { unsigned int active; unsigned long vdso_base; } mm_context_t; + +/* Page size definitions, common between 32 and 64-bit + * + * shift : is the "PAGE_SHIFT" value for that page size + * penc : is the pte encoding mask + * + */ +struct mmu_psize_def +{ + unsigned int shift; /* number of bits */ + unsigned int enc; /* PTE encoding */ +}; +extern struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT]; + +/* The page sizes use the same names as 64-bit hash but are + * constants + */ +#if defined(CONFIG_PPC_4K_PAGES) +#define mmu_virtual_psize MMU_PAGE_4K +#elif defined(CONFIG_PPC_64K_PAGES) +#define mmu_virtual_psize MMU_PAGE_64K +#else +#error Unsupported page size +#endif + +extern int mmu_linear_psize; +extern int mmu_vmemmap_psize; + #endif /* !__ASSEMBLY__ */ #endif /* _ASM_POWERPC_MMU_BOOK3E_H_ */ diff --git a/arch/powerpc/include/asm/mmu-hash32.h b/arch/powerpc/include/asm/mmu-hash32.h index 16b1a1e77e64..16f513e5cbd7 100644 --- a/arch/powerpc/include/asm/mmu-hash32.h +++ b/arch/powerpc/include/asm/mmu-hash32.h @@ -55,21 +55,25 @@ struct ppc_bat { #ifndef __ASSEMBLY__ -/* Hardware Page Table Entry */ +/* + * Hardware Page Table Entry + * Note that the xpn and x bitfields are used only by processors that + * support extended addressing; otherwise, those bits are reserved. + */ struct hash_pte { unsigned long v:1; /* Entry is valid */ unsigned long vsid:24; /* Virtual segment identifier */ unsigned long h:1; /* Hash algorithm indicator */ unsigned long api:6; /* Abbreviated page index */ unsigned long rpn:20; /* Real (physical) page number */ - unsigned long :3; /* Unused */ + unsigned long xpn:3; /* Real page number bits 0-2, optional */ unsigned long r:1; /* Referenced */ unsigned long c:1; /* Changed */ unsigned long w:1; /* Write-thru cache mode */ unsigned long i:1; /* Cache inhibited */ unsigned long m:1; /* Memory coherence */ unsigned long g:1; /* Guarded */ - unsigned long :1; /* Unused */ + unsigned long x:1; /* Real page number bit 3, optional */ unsigned long pp:2; /* Page protection */ }; @@ -80,4 +84,10 @@ typedef struct { #endif /* !__ASSEMBLY__ */ +/* We happily ignore the smaller BATs on 601, we don't actually use + * those definitions on hash32 at the moment anyway + */ +#define mmu_virtual_psize MMU_PAGE_4K +#define mmu_linear_psize MMU_PAGE_256M + #endif /* _ASM_POWERPC_MMU_HASH32_H_ */ diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h index 98c104a09961..bebe31c2e907 100644 --- a/arch/powerpc/include/asm/mmu-hash64.h +++ b/arch/powerpc/include/asm/mmu-hash64.h @@ -41,6 +41,7 @@ extern char initial_stab[]; #define SLB_NUM_BOLTED 3 #define SLB_CACHE_ENTRIES 8 +#define SLB_MIN_SIZE 32 /* Bits in the SLB ESID word */ #define SLB_ESID_V ASM_CONST(0x0000000008000000) /* valid */ @@ -139,26 +140,6 @@ struct mmu_psize_def #endif /* __ASSEMBLY__ */ /* - * The kernel use the constants below to index in the page sizes array. - * The use of fixed constants for this purpose is better for performances - * of the low level hash refill handlers. - * - * A non supported page size has a "shift" field set to 0 - * - * Any new page size being implemented can get a new entry in here. Whether - * the kernel will use it or not is a different matter though. The actual page - * size used by hugetlbfs is not defined here and may be made variable - */ - -#define MMU_PAGE_4K 0 /* 4K */ -#define MMU_PAGE_64K 1 /* 64K */ -#define MMU_PAGE_64K_AP 2 /* 64K Admixed (in a 4K segment) */ -#define MMU_PAGE_1M 3 /* 1M */ -#define MMU_PAGE_16M 4 /* 16M */ -#define MMU_PAGE_16G 5 /* 16G */ -#define MMU_PAGE_COUNT 6 - -/* * Segment sizes. * These are the values used by hardware in the B field of * SLB entries and the first dword of MMU hashtable entries. @@ -296,6 +277,7 @@ extern void slb_flush_and_rebolt(void); extern void stab_initialize(unsigned long stab); extern void slb_vmalloc_update(void); +extern void slb_set_size(u16 size); #endif /* __ASSEMBLY__ */ /* diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h index fb57ded592f9..7ffbb65ff7a9 100644 --- a/arch/powerpc/include/asm/mmu.h +++ b/arch/powerpc/include/asm/mmu.h @@ -17,6 +17,7 @@ #define MMU_FTR_TYPE_40x ASM_CONST(0x00000004) #define MMU_FTR_TYPE_44x ASM_CONST(0x00000008) #define MMU_FTR_TYPE_FSL_E ASM_CONST(0x00000010) +#define MMU_FTR_TYPE_3E ASM_CONST(0x00000020) /* * This is individual features @@ -57,6 +58,15 @@ */ #define MMU_FTR_TLBIE_206 ASM_CONST(0x00400000) +/* Enable use of TLB reservation. Processor should support tlbsrx. + * instruction and MAS0[WQ]. + */ +#define MMU_FTR_USE_TLBRSRV ASM_CONST(0x00800000) + +/* Use paired MAS registers (MAS7||MAS3, etc.) + */ +#define MMU_FTR_USE_PAIRED_MAS ASM_CONST(0x01000000) + #ifndef __ASSEMBLY__ #include <asm/cputable.h> @@ -73,6 +83,41 @@ extern void early_init_mmu_secondary(void); #endif /* !__ASSEMBLY__ */ +/* The kernel use the constants below to index in the page sizes array. + * The use of fixed constants for this purpose is better for performances + * of the low level hash refill handlers. + * + * A non supported page size has a "shift" field set to 0 + * + * Any new page size being implemented can get a new entry in here. Whether + * the kernel will use it or not is a different matter though. The actual page + * size used by hugetlbfs is not defined here and may be made variable + * + * Note: This array ended up being a false good idea as it's growing to the + * point where I wonder if we should replace it with something different, + * to think about, feedback welcome. --BenH. + */ + +/* There are #define as they have to be used in assembly + * + * WARNING: If you change this list, make sure to update the array of + * names currently in arch/powerpc/mm/hugetlbpage.c or bad things will + * happen + */ +#define MMU_PAGE_4K 0 +#define MMU_PAGE_16K 1 +#define MMU_PAGE_64K 2 +#define MMU_PAGE_64K_AP 3 /* "Admixed pages" (hash64 only) */ +#define MMU_PAGE_256K 4 +#define MMU_PAGE_1M 5 +#define MMU_PAGE_8M 6 +#define MMU_PAGE_16M 7 +#define MMU_PAGE_256M 8 +#define MMU_PAGE_1G 9 +#define MMU_PAGE_16G 10 +#define MMU_PAGE_64G 11 +#define MMU_PAGE_COUNT 12 + #if defined(CONFIG_PPC_STD_MMU_64) /* 64-bit classic hash table MMU */ @@ -94,5 +139,6 @@ extern void early_init_mmu_secondary(void); # include <asm/mmu-8xx.h> #endif + #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_MMU_H_ */ diff --git a/arch/powerpc/include/asm/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h index b7063669f972..b34e94d94435 100644 --- a/arch/powerpc/include/asm/mmu_context.h +++ b/arch/powerpc/include/asm/mmu_context.h @@ -14,7 +14,6 @@ /* * Most if the context management is out of line */ -extern void mmu_context_init(void); extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm); extern void destroy_context(struct mm_struct *mm); @@ -23,6 +22,12 @@ extern void switch_stab(struct task_struct *tsk, struct mm_struct *mm); extern void switch_slb(struct task_struct *tsk, struct mm_struct *mm); extern void set_context(unsigned long id, pgd_t *pgd); +#ifdef CONFIG_PPC_BOOK3S_64 +static inline void mmu_context_init(void) { } +#else +extern void mmu_context_init(void); +#endif + /* * switch_mm is the entry point called from the architecture independent * code in kernel/sched.c @@ -38,6 +43,10 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, tsk->thread.pgdir = next->pgd; #endif /* CONFIG_PPC32 */ + /* 64-bit Book3E keeps track of current PGD in the PACA */ +#ifdef CONFIG_PPC_BOOK3E_64 + get_paca()->pgd = next->pgd; +#endif /* Nothing else to do if we aren't actually switching */ if (prev == next) return; @@ -84,6 +93,10 @@ static inline void activate_mm(struct mm_struct *prev, struct mm_struct *next) static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) { + /* 64-bit Book3E keeps track of current PGD in the PACA */ +#ifdef CONFIG_PPC_BOOK3E_64 + get_paca()->pgd = NULL; +#endif } #endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/nvram.h b/arch/powerpc/include/asm/nvram.h index efde5ac82f7b..6c587eddee59 100644 --- a/arch/powerpc/include/asm/nvram.h +++ b/arch/powerpc/include/asm/nvram.h @@ -107,6 +107,9 @@ extern void pmac_xpram_write(int xpaddr, u8 data); /* Synchronize NVRAM */ extern void nvram_sync(void); +/* Determine NVRAM size */ +extern ssize_t nvram_get_size(void); + /* Normal access to NVRAM */ extern unsigned char nvram_read_byte(int i); extern void nvram_write_byte(unsigned char c, int i); diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h index c8a3cbfe02ff..7d8514ceceae 100644 --- a/arch/powerpc/include/asm/paca.h +++ b/arch/powerpc/include/asm/paca.h @@ -14,9 +14,11 @@ #define _ASM_POWERPC_PACA_H #ifdef __KERNEL__ -#include <asm/types.h> -#include <asm/lppaca.h> -#include <asm/mmu.h> +#include <asm/types.h> +#include <asm/lppaca.h> +#include <asm/mmu.h> +#include <asm/page.h> +#include <asm/exception-64e.h> register struct paca_struct *local_paca asm("r13"); @@ -91,6 +93,21 @@ struct paca_struct { u16 slb_cache[SLB_CACHE_ENTRIES]; #endif /* CONFIG_PPC_STD_MMU_64 */ +#ifdef CONFIG_PPC_BOOK3E + pgd_t *pgd; /* Current PGD */ + pgd_t *kernel_pgd; /* Kernel PGD */ + u64 exgen[8] __attribute__((aligned(0x80))); + u64 extlb[EX_TLB_SIZE*3] __attribute__((aligned(0x80))); + u64 exmc[8]; /* used for machine checks */ + u64 excrit[8]; /* used for crit interrupts */ + u64 exdbg[8]; /* used for debug interrupts */ + + /* Kernel stack pointers for use by special exceptions */ + void *mc_kstack; + void *crit_kstack; + void *dbg_kstack; +#endif /* CONFIG_PPC_BOOK3E */ + mm_context_t context; /* @@ -105,7 +122,7 @@ struct paca_struct { u8 soft_enabled; /* irq soft-enable flag */ u8 hard_enabled; /* set if irqs are enabled in MSR */ u8 io_sync; /* writel() needs spin_unlock sync */ - u8 perf_counter_pending; /* PM interrupt while soft-disabled */ + u8 perf_event_pending; /* PM interrupt while soft-disabled */ /* Stuff for accurate time accounting */ u64 user_time; /* accumulated usermode TB ticks */ diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h index 4940662ee87e..ff24254990e1 100644 --- a/arch/powerpc/include/asm/page.h +++ b/arch/powerpc/include/asm/page.h @@ -139,7 +139,11 @@ extern phys_addr_t kernstart_addr; * Don't compare things with KERNELBASE or PAGE_OFFSET to test for * "kernelness", use is_kernel_addr() - it should do what you want. */ +#ifdef CONFIG_PPC_BOOK3E_64 +#define is_kernel_addr(x) ((x) >= 0x8000000000000000ul) +#else #define is_kernel_addr(x) ((x) >= PAGE_OFFSET) +#endif #ifndef __ASSEMBLY__ diff --git a/arch/powerpc/include/asm/page_64.h b/arch/powerpc/include/asm/page_64.h index 5817a3b747e5..3f17b83f55a1 100644 --- a/arch/powerpc/include/asm/page_64.h +++ b/arch/powerpc/include/asm/page_64.h @@ -135,12 +135,22 @@ extern void slice_set_range_psize(struct mm_struct *mm, unsigned long start, #endif /* __ASSEMBLY__ */ #else #define slice_init() +#ifdef CONFIG_PPC_STD_MMU_64 #define get_slice_psize(mm, addr) ((mm)->context.user_psize) #define slice_set_user_psize(mm, psize) \ do { \ (mm)->context.user_psize = (psize); \ (mm)->context.sllp = SLB_VSID_USER | mmu_psize_defs[(psize)].sllp; \ } while (0) +#else /* CONFIG_PPC_STD_MMU_64 */ +#ifdef CONFIG_PPC_64K_PAGES +#define get_slice_psize(mm, addr) MMU_PAGE_64K +#else /* CONFIG_PPC_64K_PAGES */ +#define get_slice_psize(mm, addr) MMU_PAGE_4K +#endif /* !CONFIG_PPC_64K_PAGES */ +#define slice_set_user_psize(mm, psize) do { BUG(); } while(0) +#endif /* !CONFIG_PPC_STD_MMU_64 */ + #define slice_set_range_psize(mm, start, len, psize) \ slice_set_user_psize((mm), (psize)) #define slice_mm_new_context(mm) 1 diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h index 4c61fa0b8d75..76e1f313a58e 100644 --- a/arch/powerpc/include/asm/pci-bridge.h +++ b/arch/powerpc/include/asm/pci-bridge.h @@ -77,9 +77,7 @@ struct pci_controller { int first_busno; int last_busno; -#ifndef CONFIG_PPC64 int self_busno; -#endif void __iomem *io_base_virt; #ifdef CONFIG_PPC64 @@ -104,7 +102,6 @@ struct pci_controller { unsigned int __iomem *cfg_addr; void __iomem *cfg_data; -#ifndef CONFIG_PPC64 /* * Used for variants of PCI indirect handling and possible quirks: * SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1 @@ -128,7 +125,6 @@ struct pci_controller { #define PPC_INDIRECT_TYPE_BIG_ENDIAN 0x00000010 #define PPC_INDIRECT_TYPE_BROKEN_MRM 0x00000020 u32 indirect_type; -#endif /* !CONFIG_PPC64 */ /* Currently, we limit ourselves to 1 IO range and 3 mem * ranges since the common pci_bus structure can't handle more */ @@ -146,21 +142,6 @@ struct pci_controller { #endif /* CONFIG_PPC64 */ }; -#ifndef CONFIG_PPC64 - -static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus) -{ - return bus->sysdata; -} - -static inline int isa_vaddr_is_ioport(void __iomem *address) -{ - /* No specific ISA handling on ppc32 at this stage, it - * all goes through PCI - */ - return 0; -} - /* These are used for config access before all the PCI probing has been done. */ extern int early_read_config_byte(struct pci_controller *hose, int bus, @@ -182,6 +163,22 @@ extern int early_find_capability(struct pci_controller *hose, int bus, extern void setup_indirect_pci(struct pci_controller* hose, resource_size_t cfg_addr, resource_size_t cfg_data, u32 flags); + +#ifndef CONFIG_PPC64 + +static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus) +{ + return bus->sysdata; +} + +static inline int isa_vaddr_is_ioport(void __iomem *address) +{ + /* No specific ISA handling on ppc32 at this stage, it + * all goes through PCI + */ + return 0; +} + #else /* CONFIG_PPC64 */ /* @@ -284,11 +281,6 @@ static inline int isa_vaddr_is_ioport(void __iomem *address) extern int pcibios_unmap_io_space(struct pci_bus *bus); extern int pcibios_map_io_space(struct pci_bus *bus); -/* Return values for ppc_md.pci_probe_mode function */ -#define PCI_PROBE_NONE -1 /* Don't look at this bus at all */ -#define PCI_PROBE_NORMAL 0 /* Do normal PCI probing */ -#define PCI_PROBE_DEVTREE 1 /* Instantiate from device tree */ - #ifdef CONFIG_NUMA #define PHB_SET_NODE(PHB, NODE) ((PHB)->node = (NODE)) #else diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h index d9483c504d2d..b5ea626eea2d 100644 --- a/arch/powerpc/include/asm/pci.h +++ b/arch/powerpc/include/asm/pci.h @@ -22,6 +22,11 @@ #include <asm-generic/pci-dma-compat.h> +/* Return values for ppc_md.pci_probe_mode function */ +#define PCI_PROBE_NONE -1 /* Don't look at this bus at all */ +#define PCI_PROBE_NORMAL 0 /* Do normal PCI probing */ +#define PCI_PROBE_DEVTREE 1 /* Instantiate from device tree */ + #define PCIBIOS_MIN_IO 0x1000 #define PCIBIOS_MIN_MEM 0x10000000 @@ -40,7 +45,6 @@ struct pci_dev; */ #define pcibios_assign_all_busses() \ (ppc_pci_has_flag(PPC_PCI_REASSIGN_ALL_BUS)) -#define pcibios_scan_all_fns(a, b) 0 static inline void pcibios_set_master(struct pci_dev *dev) { @@ -61,8 +65,8 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) } #ifdef CONFIG_PCI -extern void set_pci_dma_ops(struct dma_mapping_ops *dma_ops); -extern struct dma_mapping_ops *get_pci_dma_ops(void); +extern void set_pci_dma_ops(struct dma_map_ops *dma_ops); +extern struct dma_map_ops *get_pci_dma_ops(void); #else /* CONFIG_PCI */ #define set_pci_dma_ops(d) #define get_pci_dma_ops() NULL @@ -228,6 +232,8 @@ extern void pci_resource_to_user(const struct pci_dev *dev, int bar, extern void pcibios_setup_bus_devices(struct pci_bus *bus); extern void pcibios_setup_bus_self(struct pci_bus *bus); +extern void pcibios_setup_phb_io_space(struct pci_controller *hose); +extern void pcibios_scan_phb(struct pci_controller *hose, void *sysdata); #endif /* __KERNEL__ */ #endif /* __ASM_POWERPC_PCI_H */ diff --git a/arch/powerpc/include/asm/perf_counter.h b/arch/powerpc/include/asm/perf_event.h index 0ea0639fcf75..3288ce3997e0 100644 --- a/arch/powerpc/include/asm/perf_counter.h +++ b/arch/powerpc/include/asm/perf_event.h @@ -1,5 +1,5 @@ /* - * Performance counter support - PowerPC-specific definitions. + * Performance event support - PowerPC-specific definitions. * * Copyright 2008-2009 Paul Mackerras, IBM Corporation. * @@ -12,7 +12,7 @@ #include <asm/hw_irq.h> -#define MAX_HWCOUNTERS 8 +#define MAX_HWEVENTS 8 #define MAX_EVENT_ALTERNATIVES 8 #define MAX_LIMITED_HWCOUNTERS 2 @@ -28,12 +28,12 @@ struct power_pmu { unsigned long test_adder; int (*compute_mmcr)(u64 events[], int n_ev, unsigned int hwc[], unsigned long mmcr[]); - int (*get_constraint)(u64 event, unsigned long *mskp, + int (*get_constraint)(u64 event_id, unsigned long *mskp, unsigned long *valp); - int (*get_alternatives)(u64 event, unsigned int flags, + int (*get_alternatives)(u64 event_id, unsigned int flags, u64 alt[]); void (*disable_pmc)(unsigned int pmc, unsigned long mmcr[]); - int (*limited_pmc_event)(u64 event); + int (*limited_pmc_event)(u64 event_id); u32 flags; int n_generic; int *generic_events; @@ -61,10 +61,10 @@ struct pt_regs; extern unsigned long perf_misc_flags(struct pt_regs *regs); extern unsigned long perf_instruction_pointer(struct pt_regs *regs); -#define PERF_COUNTER_INDEX_OFFSET 1 +#define PERF_EVENT_INDEX_OFFSET 1 /* - * Only override the default definitions in include/linux/perf_counter.h + * Only override the default definitions in include/linux/perf_event.h * if we have hardware PMU support. */ #ifdef CONFIG_PPC_PERF_CTRS @@ -73,14 +73,14 @@ extern unsigned long perf_instruction_pointer(struct pt_regs *regs); /* * The power_pmu.get_constraint function returns a 32/64-bit value and - * a 32/64-bit mask that express the constraints between this event and + * a 32/64-bit mask that express the constraints between this event_id and * other events. * * The value and mask are divided up into (non-overlapping) bitfields * of three different types: * * Select field: this expresses the constraint that some set of bits - * in MMCR* needs to be set to a specific value for this event. For a + * in MMCR* needs to be set to a specific value for this event_id. For a * select field, the mask contains 1s in every bit of the field, and * the value contains a unique value for each possible setting of the * MMCR* bits. The constraint checking code will ensure that two events @@ -102,9 +102,9 @@ extern unsigned long perf_instruction_pointer(struct pt_regs *regs); * possible.) For N classes, the field is N+1 bits wide, and each class * is assigned one bit from the least-significant N bits. The mask has * only the most-significant bit set, and the value has only the bit - * for the event's class set. The test_adder has the least significant + * for the event_id's class set. The test_adder has the least significant * bit set in the field. * - * If an event is not subject to the constraint expressed by a particular + * If an event_id is not subject to the constraint expressed by a particular * field, then it will have 0 in both the mask and value for that field. */ diff --git a/arch/powerpc/include/asm/pgalloc.h b/arch/powerpc/include/asm/pgalloc.h index 1730e5e298d6..f2e812de7c3c 100644 --- a/arch/powerpc/include/asm/pgalloc.h +++ b/arch/powerpc/include/asm/pgalloc.h @@ -4,6 +4,15 @@ #include <linux/mm.h> +#ifdef CONFIG_PPC_BOOK3E +extern void tlb_flush_pgtable(struct mmu_gather *tlb, unsigned long address); +#else /* CONFIG_PPC_BOOK3E */ +static inline void tlb_flush_pgtable(struct mmu_gather *tlb, + unsigned long address) +{ +} +#endif /* !CONFIG_PPC_BOOK3E */ + static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) { free_page((unsigned long)pte); @@ -19,7 +28,12 @@ typedef struct pgtable_free { unsigned long val; } pgtable_free_t; -#define PGF_CACHENUM_MASK 0x7 +/* This needs to be big enough to allow for MMU_PAGE_COUNT + 2 to be stored + * and small enough to fit in the low bits of any naturally aligned page + * table cache entry. Arbitrarily set to 0x1f, that should give us some + * room to grow + */ +#define PGF_CACHENUM_MASK 0x1f static inline pgtable_free_t pgtable_free_cache(void *p, int cachenum, unsigned long mask) @@ -35,19 +49,27 @@ static inline pgtable_free_t pgtable_free_cache(void *p, int cachenum, #include <asm/pgalloc-32.h> #endif -extern void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf); - #ifdef CONFIG_SMP -#define __pte_free_tlb(tlb,ptepage,address) \ -do { \ - pgtable_page_dtor(ptepage); \ - pgtable_free_tlb(tlb, pgtable_free_cache(page_address(ptepage), \ - PTE_NONCACHE_NUM, PTE_TABLE_SIZE-1)); \ -} while (0) -#else -#define __pte_free_tlb(tlb, pte, address) pte_free((tlb)->mm, (pte)) -#endif +extern void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf); +extern void pte_free_finish(void); +#else /* CONFIG_SMP */ +static inline void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf) +{ + pgtable_free(pgf); +} +static inline void pte_free_finish(void) { } +#endif /* !CONFIG_SMP */ +static inline void __pte_free_tlb(struct mmu_gather *tlb, struct page *ptepage, + unsigned long address) +{ + pgtable_free_t pgf = pgtable_free_cache(page_address(ptepage), + PTE_NONCACHE_NUM, + PTE_TABLE_SIZE-1); + tlb_flush_pgtable(tlb, address); + pgtable_page_dtor(ptepage); + pgtable_free_tlb(tlb, pgf); +} #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_PGALLOC_H */ diff --git a/arch/powerpc/include/asm/pgtable-ppc32.h b/arch/powerpc/include/asm/pgtable-ppc32.h index c9ff9d75990e..55646adfa843 100644 --- a/arch/powerpc/include/asm/pgtable-ppc32.h +++ b/arch/powerpc/include/asm/pgtable-ppc32.h @@ -111,6 +111,8 @@ extern int icache_44x_need_flush; #include <asm/pte-40x.h> #elif defined(CONFIG_44x) #include <asm/pte-44x.h> +#elif defined(CONFIG_FSL_BOOKE) && defined(CONFIG_PTE_64BIT) +#include <asm/pte-book3e.h> #elif defined(CONFIG_FSL_BOOKE) #include <asm/pte-fsl-booke.h> #elif defined(CONFIG_8xx) @@ -186,7 +188,7 @@ static inline unsigned long pte_update(pte_t *p, #endif /* !PTE_ATOMIC_UPDATES */ #ifdef CONFIG_44x - if ((old & _PAGE_USER) && (old & _PAGE_HWEXEC)) + if ((old & _PAGE_USER) && (old & _PAGE_EXEC)) icache_44x_need_flush = 1; #endif return old; @@ -217,7 +219,7 @@ static inline unsigned long long pte_update(pte_t *p, #endif /* !PTE_ATOMIC_UPDATES */ #ifdef CONFIG_44x - if ((old & _PAGE_USER) && (old & _PAGE_HWEXEC)) + if ((old & _PAGE_USER) && (old & _PAGE_EXEC)) icache_44x_need_flush = 1; #endif return old; @@ -267,8 +269,7 @@ static inline void huge_ptep_set_wrprotect(struct mm_struct *mm, static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry) { unsigned long bits = pte_val(entry) & - (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | - _PAGE_HWEXEC | _PAGE_EXEC); + (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | _PAGE_EXEC); pte_update(ptep, 0, bits); } diff --git a/arch/powerpc/include/asm/pgtable-ppc64-64k.h b/arch/powerpc/include/asm/pgtable-ppc64-64k.h index 6cc085b945a5..90533ddcd703 100644 --- a/arch/powerpc/include/asm/pgtable-ppc64-64k.h +++ b/arch/powerpc/include/asm/pgtable-ppc64-64k.h @@ -10,10 +10,10 @@ #define PGD_INDEX_SIZE 4 #ifndef __ASSEMBLY__ - #define PTE_TABLE_SIZE (sizeof(real_pte_t) << PTE_INDEX_SIZE) #define PMD_TABLE_SIZE (sizeof(pmd_t) << PMD_INDEX_SIZE) #define PGD_TABLE_SIZE (sizeof(pgd_t) << PGD_INDEX_SIZE) +#endif /* __ASSEMBLY__ */ #define PTRS_PER_PTE (1 << PTE_INDEX_SIZE) #define PTRS_PER_PMD (1 << PMD_INDEX_SIZE) @@ -32,8 +32,6 @@ #define PGDIR_SIZE (1UL << PGDIR_SHIFT) #define PGDIR_MASK (~(PGDIR_SIZE-1)) -#endif /* __ASSEMBLY__ */ - /* Bits to mask out from a PMD to get to the PTE page */ #define PMD_MASKED_BITS 0x1ff /* Bits to mask out from a PGD/PUD to get to the PMD page */ diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h index 8cd083c61503..806abe7a3fa5 100644 --- a/arch/powerpc/include/asm/pgtable-ppc64.h +++ b/arch/powerpc/include/asm/pgtable-ppc64.h @@ -5,11 +5,6 @@ * the ppc64 hashed page table. */ -#ifndef __ASSEMBLY__ -#include <linux/stddef.h> -#include <asm/tlbflush.h> -#endif /* __ASSEMBLY__ */ - #ifdef CONFIG_PPC_64K_PAGES #include <asm/pgtable-ppc64-64k.h> #else @@ -38,26 +33,47 @@ #endif /* - * Define the address range of the vmalloc VM area. + * Define the address range of the kernel non-linear virtual area + */ + +#ifdef CONFIG_PPC_BOOK3E +#define KERN_VIRT_START ASM_CONST(0x8000000000000000) +#else +#define KERN_VIRT_START ASM_CONST(0xD000000000000000) +#endif +#define KERN_VIRT_SIZE PGTABLE_RANGE + +/* + * The vmalloc space starts at the beginning of that region, and + * occupies half of it on hash CPUs and a quarter of it on Book3E + * (we keep a quarter for the virtual memmap) */ -#define VMALLOC_START ASM_CONST(0xD000000000000000) -#define VMALLOC_SIZE (PGTABLE_RANGE >> 1) -#define VMALLOC_END (VMALLOC_START + VMALLOC_SIZE) +#define VMALLOC_START KERN_VIRT_START +#ifdef CONFIG_PPC_BOOK3E +#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 2) +#else +#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1) +#endif +#define VMALLOC_END (VMALLOC_START + VMALLOC_SIZE) /* - * Define the address ranges for MMIO and IO space : + * The second half of the kernel virtual space is used for IO mappings, + * it's itself carved into the PIO region (ISA and PHB IO space) and + * the ioremap space * - * ISA_IO_BASE = VMALLOC_END, 64K reserved area + * ISA_IO_BASE = KERN_IO_START, 64K reserved area * PHB_IO_BASE = ISA_IO_BASE + 64K to ISA_IO_BASE + 2G, PHB IO spaces * IOREMAP_BASE = ISA_IO_BASE + 2G to VMALLOC_START + PGTABLE_RANGE */ +#define KERN_IO_START (KERN_VIRT_START + (KERN_VIRT_SIZE >> 1)) #define FULL_IO_SIZE 0x80000000ul -#define ISA_IO_BASE (VMALLOC_END) -#define ISA_IO_END (VMALLOC_END + 0x10000ul) +#define ISA_IO_BASE (KERN_IO_START) +#define ISA_IO_END (KERN_IO_START + 0x10000ul) #define PHB_IO_BASE (ISA_IO_END) -#define PHB_IO_END (VMALLOC_END + FULL_IO_SIZE) +#define PHB_IO_END (KERN_IO_START + FULL_IO_SIZE) #define IOREMAP_BASE (PHB_IO_END) -#define IOREMAP_END (VMALLOC_START + PGTABLE_RANGE) +#define IOREMAP_END (KERN_VIRT_START + KERN_VIRT_SIZE) + /* * Region IDs @@ -68,23 +84,32 @@ #define VMALLOC_REGION_ID (REGION_ID(VMALLOC_START)) #define KERNEL_REGION_ID (REGION_ID(PAGE_OFFSET)) -#define VMEMMAP_REGION_ID (0xfUL) +#define VMEMMAP_REGION_ID (0xfUL) /* Server only */ #define USER_REGION_ID (0UL) /* - * Defines the address of the vmemap area, in its own region + * Defines the address of the vmemap area, in its own region on + * hash table CPUs and after the vmalloc space on Book3E */ +#ifdef CONFIG_PPC_BOOK3E +#define VMEMMAP_BASE VMALLOC_END +#define VMEMMAP_END KERN_IO_START +#else #define VMEMMAP_BASE (VMEMMAP_REGION_ID << REGION_SHIFT) +#endif #define vmemmap ((struct page *)VMEMMAP_BASE) /* * Include the PTE bits definitions */ +#ifdef CONFIG_PPC_BOOK3S #include <asm/pte-hash64.h> +#else +#include <asm/pte-book3e.h> +#endif #include <asm/pte-common.h> - #ifdef CONFIG_PPC_MM_SLICES #define HAVE_ARCH_UNMAPPED_AREA #define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN @@ -92,6 +117,9 @@ #ifndef __ASSEMBLY__ +#include <linux/stddef.h> +#include <asm/tlbflush.h> + /* * This is the default implementation of various PTE accessors, it's * used in all cases except Book3S with 64K pages where we have a @@ -285,8 +313,7 @@ static inline void pte_clear(struct mm_struct *mm, unsigned long addr, static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry) { unsigned long bits = pte_val(entry) & - (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | - _PAGE_EXEC | _PAGE_HWEXEC); + (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | _PAGE_EXEC); #ifdef PTE_ATOMIC_UPDATES unsigned long old, tmp; diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h index eb17da781128..2a5da069714e 100644 --- a/arch/powerpc/include/asm/pgtable.h +++ b/arch/powerpc/include/asm/pgtable.h @@ -104,8 +104,8 @@ static inline void __set_pte_at(struct mm_struct *mm, unsigned long addr, else pte_update(ptep, ~_PAGE_HASHPTE, pte_val(pte)); -#elif defined(CONFIG_PPC32) && defined(CONFIG_PTE_64BIT) && defined(CONFIG_SMP) - /* Second case is 32-bit with 64-bit PTE in SMP mode. In this case, we +#elif defined(CONFIG_PPC32) && defined(CONFIG_PTE_64BIT) + /* Second case is 32-bit with 64-bit PTE. In this case, we * can just store as long as we do the two halves in the right order * with a barrier in between. This is possible because we take care, * in the hash code, to pre-invalidate if the PTE was already hashed, @@ -140,7 +140,7 @@ static inline void __set_pte_at(struct mm_struct *mm, unsigned long addr, #else /* Anything else just stores the PTE normally. That covers all 64-bit - * cases, and 32-bit non-hash with 64-bit PTEs in UP mode + * cases, and 32-bit non-hash with 32-bit PTEs. */ *ptep = pte; #endif diff --git a/arch/powerpc/include/asm/pmc.h b/arch/powerpc/include/asm/pmc.h index d6a616a1b3ea..ccc68b50d05d 100644 --- a/arch/powerpc/include/asm/pmc.h +++ b/arch/powerpc/include/asm/pmc.h @@ -27,10 +27,22 @@ extern perf_irq_t perf_irq; int reserve_pmc_hardware(perf_irq_t new_perf_irq); void release_pmc_hardware(void); +void ppc_enable_pmcs(void); #ifdef CONFIG_PPC64 -void power4_enable_pmcs(void); -void pasemi_enable_pmcs(void); +#include <asm/lppaca.h> + +static inline void ppc_set_pmu_inuse(int inuse) +{ + get_lppaca()->pmcregs_in_use = inuse; +} + +extern void power4_enable_pmcs(void); + +#else /* CONFIG_PPC64 */ + +static inline void ppc_set_pmu_inuse(int inuse) { } + #endif #endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h index b74f16d45cb4..ef9aa84cac5a 100644 --- a/arch/powerpc/include/asm/ppc-opcode.h +++ b/arch/powerpc/include/asm/ppc-opcode.h @@ -48,6 +48,8 @@ #define PPC_INST_TLBIE 0x7c000264 #define PPC_INST_TLBILX 0x7c000024 #define PPC_INST_WAIT 0x7c00007c +#define PPC_INST_TLBIVAX 0x7c000624 +#define PPC_INST_TLBSRX_DOT 0x7c0006a5 /* macros to insert fields into opcodes */ #define __PPC_RA(a) (((a) & 0x1f) << 16) @@ -76,6 +78,10 @@ __PPC_WC(w)) #define PPC_TLBIE(lp,a) stringify_in_c(.long PPC_INST_TLBIE | \ __PPC_RB(a) | __PPC_RS(lp)) +#define PPC_TLBSRX_DOT(a,b) stringify_in_c(.long PPC_INST_TLBSRX_DOT | \ + __PPC_RA(a) | __PPC_RB(b)) +#define PPC_TLBIVAX(a,b) stringify_in_c(.long PPC_INST_TLBIVAX | \ + __PPC_RA(a) | __PPC_RB(b)) /* * Define what the VSX XX1 form instructions will look like, then add diff --git a/arch/powerpc/include/asm/ppc-pci.h b/arch/powerpc/include/asm/ppc-pci.h index 854ab713f56c..2828f9d0f66d 100644 --- a/arch/powerpc/include/asm/ppc-pci.h +++ b/arch/powerpc/include/asm/ppc-pci.h @@ -39,7 +39,6 @@ void *traverse_pci_devices(struct device_node *start, traverse_func pre, extern void pci_devs_phb_init(void); extern void pci_devs_phb_init_dynamic(struct pci_controller *phb); -extern void scan_phb(struct pci_controller *hose); /* From rtas_pci.h */ extern void init_pci_config_tokens (void); diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h index f9729529c20d..498fe09263d3 100644 --- a/arch/powerpc/include/asm/ppc_asm.h +++ b/arch/powerpc/include/asm/ppc_asm.h @@ -98,13 +98,13 @@ END_FTR_SECTION_IFCLR(CPU_FTR_PURR); \ #define REST_16FPRS(n, base) REST_8FPRS(n, base); REST_8FPRS(n+8, base) #define REST_32FPRS(n, base) REST_16FPRS(n, base); REST_16FPRS(n+16, base) -#define SAVE_VR(n,b,base) li b,THREAD_VR0+(16*(n)); stvx n,b,base +#define SAVE_VR(n,b,base) li b,THREAD_VR0+(16*(n)); stvx n,base,b #define SAVE_2VRS(n,b,base) SAVE_VR(n,b,base); SAVE_VR(n+1,b,base) #define SAVE_4VRS(n,b,base) SAVE_2VRS(n,b,base); SAVE_2VRS(n+2,b,base) #define SAVE_8VRS(n,b,base) SAVE_4VRS(n,b,base); SAVE_4VRS(n+4,b,base) #define SAVE_16VRS(n,b,base) SAVE_8VRS(n,b,base); SAVE_8VRS(n+8,b,base) #define SAVE_32VRS(n,b,base) SAVE_16VRS(n,b,base); SAVE_16VRS(n+16,b,base) -#define REST_VR(n,b,base) li b,THREAD_VR0+(16*(n)); lvx n,b,base +#define REST_VR(n,b,base) li b,THREAD_VR0+(16*(n)); lvx n,base,b #define REST_2VRS(n,b,base) REST_VR(n,b,base); REST_VR(n+1,b,base) #define REST_4VRS(n,b,base) REST_2VRS(n,b,base); REST_2VRS(n+2,b,base) #define REST_8VRS(n,b,base) REST_4VRS(n,b,base); REST_4VRS(n+4,b,base) @@ -112,26 +112,26 @@ END_FTR_SECTION_IFCLR(CPU_FTR_PURR); \ #define REST_32VRS(n,b,base) REST_16VRS(n,b,base); REST_16VRS(n+16,b,base) /* Save the lower 32 VSRs in the thread VSR region */ -#define SAVE_VSR(n,b,base) li b,THREAD_VSR0+(16*(n)); STXVD2X(n,b,base) +#define SAVE_VSR(n,b,base) li b,THREAD_VSR0+(16*(n)); STXVD2X(n,base,b) #define SAVE_2VSRS(n,b,base) SAVE_VSR(n,b,base); SAVE_VSR(n+1,b,base) #define SAVE_4VSRS(n,b,base) SAVE_2VSRS(n,b,base); SAVE_2VSRS(n+2,b,base) #define SAVE_8VSRS(n,b,base) SAVE_4VSRS(n,b,base); SAVE_4VSRS(n+4,b,base) #define SAVE_16VSRS(n,b,base) SAVE_8VSRS(n,b,base); SAVE_8VSRS(n+8,b,base) #define SAVE_32VSRS(n,b,base) SAVE_16VSRS(n,b,base); SAVE_16VSRS(n+16,b,base) -#define REST_VSR(n,b,base) li b,THREAD_VSR0+(16*(n)); LXVD2X(n,b,base) +#define REST_VSR(n,b,base) li b,THREAD_VSR0+(16*(n)); LXVD2X(n,base,b) #define REST_2VSRS(n,b,base) REST_VSR(n,b,base); REST_VSR(n+1,b,base) #define REST_4VSRS(n,b,base) REST_2VSRS(n,b,base); REST_2VSRS(n+2,b,base) #define REST_8VSRS(n,b,base) REST_4VSRS(n,b,base); REST_4VSRS(n+4,b,base) #define REST_16VSRS(n,b,base) REST_8VSRS(n,b,base); REST_8VSRS(n+8,b,base) #define REST_32VSRS(n,b,base) REST_16VSRS(n,b,base); REST_16VSRS(n+16,b,base) /* Save the upper 32 VSRs (32-63) in the thread VSX region (0-31) */ -#define SAVE_VSRU(n,b,base) li b,THREAD_VR0+(16*(n)); STXVD2X(n+32,b,base) +#define SAVE_VSRU(n,b,base) li b,THREAD_VR0+(16*(n)); STXVD2X(n+32,base,b) #define SAVE_2VSRSU(n,b,base) SAVE_VSRU(n,b,base); SAVE_VSRU(n+1,b,base) #define SAVE_4VSRSU(n,b,base) SAVE_2VSRSU(n,b,base); SAVE_2VSRSU(n+2,b,base) #define SAVE_8VSRSU(n,b,base) SAVE_4VSRSU(n,b,base); SAVE_4VSRSU(n+4,b,base) #define SAVE_16VSRSU(n,b,base) SAVE_8VSRSU(n,b,base); SAVE_8VSRSU(n+8,b,base) #define SAVE_32VSRSU(n,b,base) SAVE_16VSRSU(n,b,base); SAVE_16VSRSU(n+16,b,base) -#define REST_VSRU(n,b,base) li b,THREAD_VR0+(16*(n)); LXVD2X(n+32,b,base) +#define REST_VSRU(n,b,base) li b,THREAD_VR0+(16*(n)); LXVD2X(n+32,base,b) #define REST_2VSRSU(n,b,base) REST_VSRU(n,b,base); REST_VSRU(n+1,b,base) #define REST_4VSRSU(n,b,base) REST_2VSRSU(n,b,base); REST_2VSRSU(n+2,b,base) #define REST_8VSRSU(n,b,base) REST_4VSRSU(n,b,base); REST_4VSRSU(n+4,b,base) @@ -375,8 +375,15 @@ END_FTR_SECTION_IFCLR(CPU_FTR_601) #define PPC440EP_ERR42 #endif - -#if defined(CONFIG_BOOKE) +/* + * toreal/fromreal/tophys/tovirt macros. 32-bit BookE makes them + * keep the address intact to be compatible with code shared with + * 32-bit classic. + * + * On the other hand, I find it useful to have them behave as expected + * by their name (ie always do the addition) on 64-bit BookE + */ +#if defined(CONFIG_BOOKE) && !defined(CONFIG_PPC64) #define toreal(rd) #define fromreal(rd) @@ -426,10 +433,9 @@ END_FTR_SECTION_IFCLR(CPU_FTR_601) .previous #endif -#ifdef CONFIG_PPC64 +#ifdef CONFIG_PPC_BOOK3S_64 #define RFI rfid #define MTMSRD(r) mtmsrd r - #else #define FIX_SRR1(ra, rb) #ifndef CONFIG_40x diff --git a/arch/powerpc/include/asm/pte-40x.h b/arch/powerpc/include/asm/pte-40x.h index 07630faae029..6c3e1f4378d4 100644 --- a/arch/powerpc/include/asm/pte-40x.h +++ b/arch/powerpc/include/asm/pte-40x.h @@ -46,7 +46,7 @@ #define _PAGE_RW 0x040 /* software: Writes permitted */ #define _PAGE_DIRTY 0x080 /* software: dirty page */ #define _PAGE_HWWRITE 0x100 /* hardware: Dirty & RW, set in exception */ -#define _PAGE_HWEXEC 0x200 /* hardware: EX permission */ +#define _PAGE_EXEC 0x200 /* hardware: EX permission */ #define _PAGE_ACCESSED 0x400 /* software: R: page referenced */ #define _PMD_PRESENT 0x400 /* PMD points to page of PTEs */ diff --git a/arch/powerpc/include/asm/pte-44x.h b/arch/powerpc/include/asm/pte-44x.h index 37e98bcf83e0..4192b9bad901 100644 --- a/arch/powerpc/include/asm/pte-44x.h +++ b/arch/powerpc/include/asm/pte-44x.h @@ -78,7 +78,7 @@ #define _PAGE_PRESENT 0x00000001 /* S: PTE valid */ #define _PAGE_RW 0x00000002 /* S: Write permission */ #define _PAGE_FILE 0x00000004 /* S: nonlinear file mapping */ -#define _PAGE_HWEXEC 0x00000004 /* H: Execute permission */ +#define _PAGE_EXEC 0x00000004 /* H: Execute permission */ #define _PAGE_ACCESSED 0x00000008 /* S: Page referenced */ #define _PAGE_DIRTY 0x00000010 /* S: Page dirty */ #define _PAGE_SPECIAL 0x00000020 /* S: Special page */ diff --git a/arch/powerpc/include/asm/pte-8xx.h b/arch/powerpc/include/asm/pte-8xx.h index 8c6e31251034..94e979718dcf 100644 --- a/arch/powerpc/include/asm/pte-8xx.h +++ b/arch/powerpc/include/asm/pte-8xx.h @@ -36,7 +36,6 @@ /* These five software bits must be masked out when the entry is loaded * into the TLB. */ -#define _PAGE_EXEC 0x0008 /* software: i-cache coherency required */ #define _PAGE_GUARDED 0x0010 /* software: guarded access */ #define _PAGE_DIRTY 0x0020 /* software: page changed */ #define _PAGE_RW 0x0040 /* software: user write access allowed */ diff --git a/arch/powerpc/include/asm/pte-book3e.h b/arch/powerpc/include/asm/pte-book3e.h new file mode 100644 index 000000000000..082d515930a2 --- /dev/null +++ b/arch/powerpc/include/asm/pte-book3e.h @@ -0,0 +1,84 @@ +#ifndef _ASM_POWERPC_PTE_BOOK3E_H +#define _ASM_POWERPC_PTE_BOOK3E_H +#ifdef __KERNEL__ + +/* PTE bit definitions for processors compliant to the Book3E + * architecture 2.06 or later. The position of the PTE bits + * matches the HW definition of the optional Embedded Page Table + * category. + */ + +/* Architected bits */ +#define _PAGE_PRESENT 0x000001 /* software: pte contains a translation */ +#define _PAGE_FILE 0x000002 /* (!present only) software: pte holds file offset */ +#define _PAGE_SW1 0x000002 +#define _PAGE_BAP_SR 0x000004 +#define _PAGE_BAP_UR 0x000008 +#define _PAGE_BAP_SW 0x000010 +#define _PAGE_BAP_UW 0x000020 +#define _PAGE_BAP_SX 0x000040 +#define _PAGE_BAP_UX 0x000080 +#define _PAGE_PSIZE_MSK 0x000f00 +#define _PAGE_PSIZE_4K 0x000200 +#define _PAGE_PSIZE_8K 0x000300 +#define _PAGE_PSIZE_16K 0x000400 +#define _PAGE_PSIZE_32K 0x000500 +#define _PAGE_PSIZE_64K 0x000600 +#define _PAGE_PSIZE_128K 0x000700 +#define _PAGE_PSIZE_256K 0x000800 +#define _PAGE_PSIZE_512K 0x000900 +#define _PAGE_PSIZE_1M 0x000a00 +#define _PAGE_PSIZE_2M 0x000b00 +#define _PAGE_PSIZE_4M 0x000c00 +#define _PAGE_PSIZE_8M 0x000d00 +#define _PAGE_PSIZE_16M 0x000e00 +#define _PAGE_PSIZE_32M 0x000f00 +#define _PAGE_DIRTY 0x001000 /* C: page changed */ +#define _PAGE_SW0 0x002000 +#define _PAGE_U3 0x004000 +#define _PAGE_U2 0x008000 +#define _PAGE_U1 0x010000 +#define _PAGE_U0 0x020000 +#define _PAGE_ACCESSED 0x040000 +#define _PAGE_LENDIAN 0x080000 +#define _PAGE_GUARDED 0x100000 +#define _PAGE_COHERENT 0x200000 /* M: enforce memory coherence */ +#define _PAGE_NO_CACHE 0x400000 /* I: cache inhibit */ +#define _PAGE_WRITETHRU 0x800000 /* W: cache write-through */ + +/* "Higher level" linux bit combinations */ +#define _PAGE_EXEC _PAGE_BAP_UX /* .. and was cache cleaned */ +#define _PAGE_RW (_PAGE_BAP_SW | _PAGE_BAP_UW) /* User write permission */ +#define _PAGE_KERNEL_RW (_PAGE_BAP_SW | _PAGE_BAP_SR | _PAGE_DIRTY) +#define _PAGE_KERNEL_RO (_PAGE_BAP_SR) +#define _PAGE_KERNEL_RWX (_PAGE_BAP_SW | _PAGE_BAP_SR | _PAGE_DIRTY | _PAGE_BAP_SX) +#define _PAGE_KERNEL_ROX (_PAGE_BAP_SR | _PAGE_BAP_SX) +#define _PAGE_USER (_PAGE_BAP_UR | _PAGE_BAP_SR) /* Can be read */ + +#define _PAGE_HASHPTE 0 +#define _PAGE_BUSY 0 + +#define _PAGE_SPECIAL _PAGE_SW0 + +/* Flags to be preserved on PTE modifications */ +#define _PAGE_HPTEFLAGS _PAGE_BUSY + +/* Base page size */ +#ifdef CONFIG_PPC_64K_PAGES +#define _PAGE_PSIZE _PAGE_PSIZE_64K +#define PTE_RPN_SHIFT (28) +#else +#define _PAGE_PSIZE _PAGE_PSIZE_4K +#define PTE_RPN_SHIFT (24) +#endif + +/* On 32-bit, we never clear the top part of the PTE */ +#ifdef CONFIG_PPC32 +#define _PTE_NONE_MASK 0xffffffff00000000ULL +#define _PMD_PRESENT 0 +#define _PMD_PRESENT_MASK (PAGE_MASK) +#define _PMD_BAD (~PAGE_MASK) +#endif + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_PTE_FSL_BOOKE_H */ diff --git a/arch/powerpc/include/asm/pte-common.h b/arch/powerpc/include/asm/pte-common.h index a7e210b6b48c..c3b65076a263 100644 --- a/arch/powerpc/include/asm/pte-common.h +++ b/arch/powerpc/include/asm/pte-common.h @@ -13,9 +13,6 @@ #ifndef _PAGE_HWWRITE #define _PAGE_HWWRITE 0 #endif -#ifndef _PAGE_HWEXEC -#define _PAGE_HWEXEC 0 -#endif #ifndef _PAGE_EXEC #define _PAGE_EXEC 0 #endif @@ -34,6 +31,9 @@ #ifndef _PAGE_4K_PFN #define _PAGE_4K_PFN 0 #endif +#ifndef _PAGE_SAO +#define _PAGE_SAO 0 +#endif #ifndef _PAGE_PSIZE #define _PAGE_PSIZE 0 #endif @@ -45,10 +45,16 @@ #define PMD_PAGE_SIZE(pmd) bad_call_to_PMD_PAGE_SIZE() #endif #ifndef _PAGE_KERNEL_RO -#define _PAGE_KERNEL_RO 0 +#define _PAGE_KERNEL_RO 0 +#endif +#ifndef _PAGE_KERNEL_ROX +#define _PAGE_KERNEL_ROX (_PAGE_EXEC) #endif #ifndef _PAGE_KERNEL_RW -#define _PAGE_KERNEL_RW (_PAGE_DIRTY | _PAGE_RW | _PAGE_HWWRITE) +#define _PAGE_KERNEL_RW (_PAGE_DIRTY | _PAGE_RW | _PAGE_HWWRITE) +#endif +#ifndef _PAGE_KERNEL_RWX +#define _PAGE_KERNEL_RWX (_PAGE_DIRTY | _PAGE_RW | _PAGE_HWWRITE | _PAGE_EXEC) #endif #ifndef _PAGE_HPTEFLAGS #define _PAGE_HPTEFLAGS _PAGE_HASHPTE @@ -93,8 +99,7 @@ extern unsigned long bad_call_to_PMD_PAGE_SIZE(void); #define PAGE_PROT_BITS (_PAGE_GUARDED | _PAGE_COHERENT | _PAGE_NO_CACHE | \ _PAGE_WRITETHRU | _PAGE_ENDIAN | _PAGE_4K_PFN | \ _PAGE_USER | _PAGE_ACCESSED | \ - _PAGE_RW | _PAGE_HWWRITE | _PAGE_DIRTY | \ - _PAGE_EXEC | _PAGE_HWEXEC) + _PAGE_RW | _PAGE_HWWRITE | _PAGE_DIRTY | _PAGE_EXEC) /* * We define 2 sets of base prot bits, one for basic pages (ie, @@ -151,11 +156,9 @@ extern unsigned long bad_call_to_PMD_PAGE_SIZE(void); _PAGE_NO_CACHE) #define PAGE_KERNEL_NCG __pgprot(_PAGE_BASE_NC | _PAGE_KERNEL_RW | \ _PAGE_NO_CACHE | _PAGE_GUARDED) -#define PAGE_KERNEL_X __pgprot(_PAGE_BASE | _PAGE_KERNEL_RW | _PAGE_EXEC | \ - _PAGE_HWEXEC) +#define PAGE_KERNEL_X __pgprot(_PAGE_BASE | _PAGE_KERNEL_RWX) #define PAGE_KERNEL_RO __pgprot(_PAGE_BASE | _PAGE_KERNEL_RO) -#define PAGE_KERNEL_ROX __pgprot(_PAGE_BASE | _PAGE_KERNEL_RO | _PAGE_EXEC | \ - _PAGE_HWEXEC) +#define PAGE_KERNEL_ROX __pgprot(_PAGE_BASE | _PAGE_KERNEL_ROX) /* Protection used for kernel text. We want the debuggers to be able to * set breakpoints anywhere, so don't write protect the kernel text diff --git a/arch/powerpc/include/asm/pte-fsl-booke.h b/arch/powerpc/include/asm/pte-fsl-booke.h index 10820f58acf5..2c12be5f677a 100644 --- a/arch/powerpc/include/asm/pte-fsl-booke.h +++ b/arch/powerpc/include/asm/pte-fsl-booke.h @@ -23,7 +23,7 @@ #define _PAGE_FILE 0x00002 /* S: when !present: nonlinear file mapping */ #define _PAGE_RW 0x00004 /* S: Write permission (SW) */ #define _PAGE_DIRTY 0x00008 /* S: Page dirty */ -#define _PAGE_HWEXEC 0x00010 /* H: SX permission */ +#define _PAGE_EXEC 0x00010 /* H: SX permission */ #define _PAGE_ACCESSED 0x00020 /* S: Page referenced */ #define _PAGE_ENDIAN 0x00040 /* H: E bit */ @@ -33,13 +33,6 @@ #define _PAGE_WRITETHRU 0x00400 /* H: W bit */ #define _PAGE_SPECIAL 0x00800 /* S: Special page */ -#ifdef CONFIG_PTE_64BIT -/* ERPN in a PTE never gets cleared, ignore it */ -#define _PTE_NONE_MASK 0xffffffffffff0000ULL -/* We extend the size of the PTE flags area when using 64-bit PTEs */ -#define PTE_RPN_SHIFT (PAGE_SHIFT + 8) -#endif - #define _PMD_PRESENT 0 #define _PMD_PRESENT_MASK (PAGE_MASK) #define _PMD_BAD (~PAGE_MASK) diff --git a/arch/powerpc/include/asm/pte-hash32.h b/arch/powerpc/include/asm/pte-hash32.h index 16e571c7f9ef..4aad4132d0a8 100644 --- a/arch/powerpc/include/asm/pte-hash32.h +++ b/arch/powerpc/include/asm/pte-hash32.h @@ -26,7 +26,6 @@ #define _PAGE_WRITETHRU 0x040 /* W: cache write-through */ #define _PAGE_DIRTY 0x080 /* C: page changed */ #define _PAGE_ACCESSED 0x100 /* R: page referenced */ -#define _PAGE_EXEC 0x200 /* software: i-cache coherency required */ #define _PAGE_RW 0x400 /* software: user write access allowed */ #define _PAGE_SPECIAL 0x800 /* software: Special page */ diff --git a/arch/powerpc/include/asm/qe.h b/arch/powerpc/include/asm/qe.h index 157c5ca581c8..f388f0ab193f 100644 --- a/arch/powerpc/include/asm/qe.h +++ b/arch/powerpc/include/asm/qe.h @@ -154,6 +154,7 @@ int qe_get_snum(void); void qe_put_snum(u8 snum); unsigned int qe_get_num_of_risc(void); unsigned int qe_get_num_of_snums(void); +int qe_alive_during_sleep(void); /* we actually use cpm_muram implementation, define this for convenience */ #define qe_muram_init cpm_muram_init diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index 1170267736d3..6315edc205d8 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -98,19 +98,15 @@ #define MSR_RI __MASK(MSR_RI_LG) /* Recoverable Exception */ #define MSR_LE __MASK(MSR_LE_LG) /* Little Endian */ -#ifdef CONFIG_PPC64 +#if defined(CONFIG_PPC_BOOK3S_64) +/* Server variant */ #define MSR_ MSR_ME | MSR_RI | MSR_IR | MSR_DR | MSR_ISF |MSR_HV #define MSR_KERNEL MSR_ | MSR_SF - #define MSR_USER32 MSR_ | MSR_PR | MSR_EE #define MSR_USER64 MSR_USER32 | MSR_SF - -#else /* 32-bit */ +#elif defined(CONFIG_PPC_BOOK3S_32) || defined(CONFIG_8xx) /* Default MSR for kernel mode. */ -#ifndef MSR_KERNEL /* reg_booke.h also defines this */ #define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR) -#endif - #define MSR_USER (MSR_KERNEL|MSR_PR|MSR_EE) #endif @@ -646,6 +642,137 @@ #endif /* + * SPRG usage: + * + * All 64-bit: + * - SPRG1 stores PACA pointer + * + * 64-bit server: + * - SPRG0 unused (reserved for HV on Power4) + * - SPRG2 scratch for exception vectors + * - SPRG3 unused (user visible) + * + * 64-bit embedded + * - SPRG0 generic exception scratch + * - SPRG2 TLB exception stack + * - SPRG3 unused (user visible) + * - SPRG4 unused (user visible) + * - SPRG6 TLB miss scratch (user visible, sorry !) + * - SPRG7 critical exception scratch + * - SPRG8 machine check exception scratch + * - SPRG9 debug exception scratch + * + * All 32-bit: + * - SPRG3 current thread_info pointer + * (virtual on BookE, physical on others) + * + * 32-bit classic: + * - SPRG0 scratch for exception vectors + * - SPRG1 scratch for exception vectors + * - SPRG2 indicator that we are in RTAS + * - SPRG4 (603 only) pseudo TLB LRU data + * + * 32-bit 40x: + * - SPRG0 scratch for exception vectors + * - SPRG1 scratch for exception vectors + * - SPRG2 scratch for exception vectors + * - SPRG4 scratch for exception vectors (not 403) + * - SPRG5 scratch for exception vectors (not 403) + * - SPRG6 scratch for exception vectors (not 403) + * - SPRG7 scratch for exception vectors (not 403) + * + * 32-bit 440 and FSL BookE: + * - SPRG0 scratch for exception vectors + * - SPRG1 scratch for exception vectors (*) + * - SPRG2 scratch for crit interrupts handler + * - SPRG4 scratch for exception vectors + * - SPRG5 scratch for exception vectors + * - SPRG6 scratch for machine check handler + * - SPRG7 scratch for exception vectors + * - SPRG9 scratch for debug vectors (e500 only) + * + * Additionally, BookE separates "read" and "write" + * of those registers. That allows to use the userspace + * readable variant for reads, which can avoid a fault + * with KVM type virtualization. + * + * (*) Under KVM, the host SPRG1 is used to point to + * the current VCPU data structure + * + * 32-bit 8xx: + * - SPRG0 scratch for exception vectors + * - SPRG1 scratch for exception vectors + * - SPRG2 apparently unused but initialized + * + */ +#ifdef CONFIG_PPC64 +#define SPRN_SPRG_PACA SPRN_SPRG1 +#else +#define SPRN_SPRG_THREAD SPRN_SPRG3 +#endif + +#ifdef CONFIG_PPC_BOOK3S_64 +#define SPRN_SPRG_SCRATCH0 SPRN_SPRG2 +#endif + +#ifdef CONFIG_PPC_BOOK3E_64 +#define SPRN_SPRG_MC_SCRATCH SPRN_SPRG8 +#define SPRN_SPRG_CRIT_SCRATCH SPRN_SPRG7 +#define SPRN_SPRG_DBG_SCRATCH SPRN_SPRG9 +#define SPRN_SPRG_TLB_EXFRAME SPRN_SPRG2 +#define SPRN_SPRG_TLB_SCRATCH SPRN_SPRG6 +#define SPRN_SPRG_GEN_SCRATCH SPRN_SPRG0 +#endif + +#ifdef CONFIG_PPC_BOOK3S_32 +#define SPRN_SPRG_SCRATCH0 SPRN_SPRG0 +#define SPRN_SPRG_SCRATCH1 SPRN_SPRG1 +#define SPRN_SPRG_RTAS SPRN_SPRG2 +#define SPRN_SPRG_603_LRU SPRN_SPRG4 +#endif + +#ifdef CONFIG_40x +#define SPRN_SPRG_SCRATCH0 SPRN_SPRG0 +#define SPRN_SPRG_SCRATCH1 SPRN_SPRG1 +#define SPRN_SPRG_SCRATCH2 SPRN_SPRG2 +#define SPRN_SPRG_SCRATCH3 SPRN_SPRG4 +#define SPRN_SPRG_SCRATCH4 SPRN_SPRG5 +#define SPRN_SPRG_SCRATCH5 SPRN_SPRG6 +#define SPRN_SPRG_SCRATCH6 SPRN_SPRG7 +#endif + +#ifdef CONFIG_BOOKE +#define SPRN_SPRG_RSCRATCH0 SPRN_SPRG0 +#define SPRN_SPRG_WSCRATCH0 SPRN_SPRG0 +#define SPRN_SPRG_RSCRATCH1 SPRN_SPRG1 +#define SPRN_SPRG_WSCRATCH1 SPRN_SPRG1 +#define SPRN_SPRG_RSCRATCH_CRIT SPRN_SPRG2 +#define SPRN_SPRG_WSCRATCH_CRIT SPRN_SPRG2 +#define SPRN_SPRG_RSCRATCH2 SPRN_SPRG4R +#define SPRN_SPRG_WSCRATCH2 SPRN_SPRG4W +#define SPRN_SPRG_RSCRATCH3 SPRN_SPRG5R +#define SPRN_SPRG_WSCRATCH3 SPRN_SPRG5W +#define SPRN_SPRG_RSCRATCH_MC SPRN_SPRG6R +#define SPRN_SPRG_WSCRATCH_MC SPRN_SPRG6W +#define SPRN_SPRG_RSCRATCH4 SPRN_SPRG7R +#define SPRN_SPRG_WSCRATCH4 SPRN_SPRG7W +#ifdef CONFIG_E200 +#define SPRN_SPRG_RSCRATCH_DBG SPRN_SPRG6R +#define SPRN_SPRG_WSCRATCH_DBG SPRN_SPRG6W +#else +#define SPRN_SPRG_RSCRATCH_DBG SPRN_SPRG9 +#define SPRN_SPRG_WSCRATCH_DBG SPRN_SPRG9 +#endif +#define SPRN_SPRG_RVCPU SPRN_SPRG1 +#define SPRN_SPRG_WVCPU SPRN_SPRG1 +#endif + +#ifdef CONFIG_8xx +#define SPRN_SPRG_SCRATCH0 SPRN_SPRG0 +#define SPRN_SPRG_SCRATCH1 SPRN_SPRG1 +#endif + +/* * An mtfsf instruction with the L bit set. On CPUs that support this a * full 64bits of FPSCR is restored and on other CPUs the L bit is ignored. * diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h index 6bcf364cbb2f..3bf783505528 100644 --- a/arch/powerpc/include/asm/reg_booke.h +++ b/arch/powerpc/include/asm/reg_booke.h @@ -18,18 +18,26 @@ #define MSR_IS MSR_IR /* Instruction Space */ #define MSR_DS MSR_DR /* Data Space */ #define MSR_PMM (1<<2) /* Performance monitor mark bit */ +#define MSR_CM (1<<31) /* Computation Mode (0=32-bit, 1=64-bit) */ -/* Default MSR for kernel mode. */ -#if defined (CONFIG_40x) +#if defined(CONFIG_PPC_BOOK3E_64) +#define MSR_ MSR_ME | MSR_CE +#define MSR_KERNEL MSR_ | MSR_CM +#define MSR_USER32 MSR_ | MSR_PR | MSR_EE +#define MSR_USER64 MSR_USER32 | MSR_CM +#elif defined (CONFIG_40x) #define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR|MSR_CE) -#elif defined(CONFIG_BOOKE) +#define MSR_USER (MSR_KERNEL|MSR_PR|MSR_EE) +#else #define MSR_KERNEL (MSR_ME|MSR_RI|MSR_CE) +#define MSR_USER (MSR_KERNEL|MSR_PR|MSR_EE) #endif /* Special Purpose Registers (SPRNs)*/ #define SPRN_DECAR 0x036 /* Decrementer Auto Reload Register */ #define SPRN_IVPR 0x03F /* Interrupt Vector Prefix Register */ #define SPRN_USPRG0 0x100 /* User Special Purpose Register General 0 */ +#define SPRN_SPRG3R 0x103 /* Special Purpose Register General 3 Read */ #define SPRN_SPRG4R 0x104 /* Special Purpose Register General 4 Read */ #define SPRN_SPRG5R 0x105 /* Special Purpose Register General 5 Read */ #define SPRN_SPRG6R 0x106 /* Special Purpose Register General 6 Read */ @@ -38,11 +46,18 @@ #define SPRN_SPRG5W 0x115 /* Special Purpose Register General 5 Write */ #define SPRN_SPRG6W 0x116 /* Special Purpose Register General 6 Write */ #define SPRN_SPRG7W 0x117 /* Special Purpose Register General 7 Write */ +#define SPRN_EPCR 0x133 /* Embedded Processor Control Register */ #define SPRN_DBCR2 0x136 /* Debug Control Register 2 */ #define SPRN_IAC3 0x13A /* Instruction Address Compare 3 */ #define SPRN_IAC4 0x13B /* Instruction Address Compare 4 */ #define SPRN_DVC1 0x13E /* Data Value Compare Register 1 */ #define SPRN_DVC2 0x13F /* Data Value Compare Register 2 */ +#define SPRN_MAS8 0x155 /* MMU Assist Register 8 */ +#define SPRN_TLB0PS 0x158 /* TLB 0 Page Size Register */ +#define SPRN_MAS5_MAS6 0x15c /* MMU Assist Register 5 || 6 */ +#define SPRN_MAS8_MAS1 0x15d /* MMU Assist Register 8 || 1 */ +#define SPRN_MAS7_MAS3 0x174 /* MMU Assist Register 7 || 3 */ +#define SPRN_MAS0_MAS1 0x175 /* MMU Assist Register 0 || 1 */ #define SPRN_IVOR0 0x190 /* Interrupt Vector Offset Register 0 */ #define SPRN_IVOR1 0x191 /* Interrupt Vector Offset Register 1 */ #define SPRN_IVOR2 0x192 /* Interrupt Vector Offset Register 2 */ @@ -93,6 +108,8 @@ #define SPRN_PID2 0x27A /* Process ID Register 2 */ #define SPRN_TLB0CFG 0x2B0 /* TLB 0 Config Register */ #define SPRN_TLB1CFG 0x2B1 /* TLB 1 Config Register */ +#define SPRN_TLB2CFG 0x2B2 /* TLB 2 Config Register */ +#define SPRN_TLB3CFG 0x2B3 /* TLB 3 Config Register */ #define SPRN_EPR 0x2BE /* External Proxy Register */ #define SPRN_CCR1 0x378 /* Core Configuration Register 1 */ #define SPRN_ZPR 0x3B0 /* Zone Protection Register (40x) */ @@ -415,16 +432,31 @@ #define L2CSR0_L2LOA 0x00000080 /* L2 Cache Lock Overflow Allocate */ #define L2CSR0_L2LO 0x00000020 /* L2 Cache Lock Overflow */ -/* Bit definitions for MMUCSR0 */ -#define MMUCSR0_TLB1FI 0x00000002 /* TLB1 Flash invalidate */ -#define MMUCSR0_TLB0FI 0x00000004 /* TLB0 Flash invalidate */ -#define MMUCSR0_TLB2FI 0x00000040 /* TLB2 Flash invalidate */ -#define MMUCSR0_TLB3FI 0x00000020 /* TLB3 Flash invalidate */ - /* Bit definitions for SGR. */ #define SGR_NORMAL 0 /* Speculative fetching allowed. */ #define SGR_GUARDED 1 /* Speculative fetching disallowed. */ +/* Bit definitions for EPCR */ +#define SPRN_EPCR_EXTGS 0x80000000 /* External Input interrupt + * directed to Guest state */ +#define SPRN_EPCR_DTLBGS 0x40000000 /* Data TLB Error interrupt + * directed to guest state */ +#define SPRN_EPCR_ITLBGS 0x20000000 /* Instr. TLB error interrupt + * directed to guest state */ +#define SPRN_EPCR_DSIGS 0x10000000 /* Data Storage interrupt + * directed to guest state */ +#define SPRN_EPCR_ISIGS 0x08000000 /* Instr. Storage interrupt + * directed to guest state */ +#define SPRN_EPCR_DUVD 0x04000000 /* Disable Hypervisor Debug */ +#define SPRN_EPCR_ICM 0x02000000 /* Interrupt computation mode + * (copied to MSR:CM on intr) */ +#define SPRN_EPCR_GICM 0x01000000 /* Guest Interrupt Comp. mode */ +#define SPRN_EPCR_DGTMI 0x00800000 /* Disable TLB Guest Management + * instructions */ +#define SPRN_EPCR_DMIUH 0x00400000 /* Disable MAS Interrupt updates + * for hypervisor */ + + /* * The IBM-403 is an even more odd special case, as it is much * older than the IBM-405 series. We put these down here incase someone diff --git a/arch/powerpc/include/asm/setup.h b/arch/powerpc/include/asm/setup.h index 817fac0a0714..dae19342f0b9 100644 --- a/arch/powerpc/include/asm/setup.h +++ b/arch/powerpc/include/asm/setup.h @@ -1,6 +1,6 @@ #ifndef _ASM_POWERPC_SETUP_H #define _ASM_POWERPC_SETUP_H -#define COMMAND_LINE_SIZE 512 +#include <asm-generic/setup.h> #endif /* _ASM_POWERPC_SETUP_H */ diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h index c25f73d1d842..c0d3b8af9319 100644 --- a/arch/powerpc/include/asm/smp.h +++ b/arch/powerpc/include/asm/smp.h @@ -148,6 +148,16 @@ extern struct smp_ops_t *smp_ops; extern void arch_send_call_function_single_ipi(int cpu); extern void arch_send_call_function_ipi(cpumask_t mask); +/* Definitions relative to the secondary CPU spin loop + * and entry point. Not all of them exist on both 32 and + * 64-bit but defining them all here doesn't harm + */ +extern void generic_secondary_smp_init(void); +extern void generic_secondary_thread_init(void); +extern unsigned long __secondary_hold_spinloop; +extern unsigned long __secondary_hold_acknowledge; +extern char __secondary_hold; + #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/socket.h b/arch/powerpc/include/asm/socket.h index 1e5cfad0e3f7..3ab8b3e6feb0 100644 --- a/arch/powerpc/include/asm/socket.h +++ b/arch/powerpc/include/asm/socket.h @@ -64,4 +64,7 @@ #define SO_TIMESTAMPING 37 #define SCM_TIMESTAMPING SO_TIMESTAMPING +#define SO_PROTOCOL 38 +#define SO_DOMAIN 39 + #endif /* _ASM_POWERPC_SOCKET_H */ diff --git a/arch/powerpc/include/asm/spinlock.h b/arch/powerpc/include/asm/spinlock.h index c3b193121f81..198266cf9e2d 100644 --- a/arch/powerpc/include/asm/spinlock.h +++ b/arch/powerpc/include/asm/spinlock.h @@ -54,7 +54,7 @@ * This returns the old value in the lock, so we succeeded * in getting the lock if the return value is 0. */ -static inline unsigned long __spin_trylock(raw_spinlock_t *lock) +static inline unsigned long arch_spin_trylock(raw_spinlock_t *lock) { unsigned long tmp, token; @@ -76,7 +76,7 @@ static inline unsigned long __spin_trylock(raw_spinlock_t *lock) static inline int __raw_spin_trylock(raw_spinlock_t *lock) { CLEAR_IO_SYNC; - return __spin_trylock(lock) == 0; + return arch_spin_trylock(lock) == 0; } /* @@ -108,7 +108,7 @@ static inline void __raw_spin_lock(raw_spinlock_t *lock) { CLEAR_IO_SYNC; while (1) { - if (likely(__spin_trylock(lock) == 0)) + if (likely(arch_spin_trylock(lock) == 0)) break; do { HMT_low(); @@ -126,7 +126,7 @@ void __raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long flags) CLEAR_IO_SYNC; while (1) { - if (likely(__spin_trylock(lock) == 0)) + if (likely(arch_spin_trylock(lock) == 0)) break; local_save_flags(flags_dis); local_irq_restore(flags); @@ -181,7 +181,7 @@ extern void __raw_spin_unlock_wait(raw_spinlock_t *lock); * This returns the old value in the lock + 1, * so we got a read lock if the return value is > 0. */ -static inline long __read_trylock(raw_rwlock_t *rw) +static inline long arch_read_trylock(raw_rwlock_t *rw) { long tmp; @@ -205,7 +205,7 @@ static inline long __read_trylock(raw_rwlock_t *rw) * This returns the old value in the lock, * so we got the write lock if the return value is 0. */ -static inline long __write_trylock(raw_rwlock_t *rw) +static inline long arch_write_trylock(raw_rwlock_t *rw) { long tmp, token; @@ -228,7 +228,7 @@ static inline long __write_trylock(raw_rwlock_t *rw) static inline void __raw_read_lock(raw_rwlock_t *rw) { while (1) { - if (likely(__read_trylock(rw) > 0)) + if (likely(arch_read_trylock(rw) > 0)) break; do { HMT_low(); @@ -242,7 +242,7 @@ static inline void __raw_read_lock(raw_rwlock_t *rw) static inline void __raw_write_lock(raw_rwlock_t *rw) { while (1) { - if (likely(__write_trylock(rw) == 0)) + if (likely(arch_write_trylock(rw) == 0)) break; do { HMT_low(); @@ -255,12 +255,12 @@ static inline void __raw_write_lock(raw_rwlock_t *rw) static inline int __raw_read_trylock(raw_rwlock_t *rw) { - return __read_trylock(rw) > 0; + return arch_read_trylock(rw) > 0; } static inline int __raw_write_trylock(raw_rwlock_t *rw) { - return __write_trylock(rw) == 0; + return arch_write_trylock(rw) == 0; } static inline void __raw_read_unlock(raw_rwlock_t *rw) diff --git a/arch/powerpc/include/asm/swiotlb.h b/arch/powerpc/include/asm/swiotlb.h index 30891d6e2bc1..8979d4cd3d70 100644 --- a/arch/powerpc/include/asm/swiotlb.h +++ b/arch/powerpc/include/asm/swiotlb.h @@ -13,15 +13,13 @@ #include <linux/swiotlb.h> -extern struct dma_mapping_ops swiotlb_dma_ops; -extern struct dma_mapping_ops swiotlb_pci_dma_ops; - -int swiotlb_arch_address_needs_mapping(struct device *, dma_addr_t, - size_t size); +extern struct dma_map_ops swiotlb_dma_ops; static inline void dma_mark_clean(void *addr, size_t size) {} extern unsigned int ppc_swiotlb_enable; int __init swiotlb_setup_bus_notifier(void); +extern void pci_dma_dev_setup_swiotlb(struct pci_dev *pdev); + #endif /* __ASM_SWIOTLB_H */ diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h index 370600ca2765..c7d671a7d9a1 100644 --- a/arch/powerpc/include/asm/systbl.h +++ b/arch/powerpc/include/asm/systbl.h @@ -95,8 +95,8 @@ SYSCALL(reboot) SYSX(sys_ni_syscall,compat_sys_old_readdir,sys_old_readdir) SYSCALL_SPU(mmap) SYSCALL_SPU(munmap) -SYSCALL_SPU(truncate) -SYSCALL_SPU(ftruncate) +COMPAT_SYS_SPU(truncate) +COMPAT_SYS_SPU(ftruncate) SYSCALL_SPU(fchmod) SYSCALL_SPU(fchown) COMPAT_SYS_SPU(getpriority) @@ -322,7 +322,7 @@ SYSCALL_SPU(epoll_create1) SYSCALL_SPU(dup3) SYSCALL_SPU(pipe2) SYSCALL(inotify_init1) -SYSCALL_SPU(perf_counter_open) +SYSCALL_SPU(perf_event_open) COMPAT_SYS_SPU(preadv) COMPAT_SYS_SPU(pwritev) COMPAT_SYS(rt_tgsigqueueinfo) diff --git a/arch/powerpc/include/asm/tlb.h b/arch/powerpc/include/asm/tlb.h index e20ff7541f36..e2b428b0f7ba 100644 --- a/arch/powerpc/include/asm/tlb.h +++ b/arch/powerpc/include/asm/tlb.h @@ -25,57 +25,25 @@ #include <linux/pagemap.h> -struct mmu_gather; - #define tlb_start_vma(tlb, vma) do { } while (0) #define tlb_end_vma(tlb, vma) do { } while (0) -#if !defined(CONFIG_PPC_STD_MMU) - -#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) - -#elif defined(__powerpc64__) - -extern void pte_free_finish(void); - -static inline void tlb_flush(struct mmu_gather *tlb) -{ - struct ppc64_tlb_batch *tlbbatch = &__get_cpu_var(ppc64_tlb_batch); - - /* If there's a TLB batch pending, then we must flush it because the - * pages are going to be freed and we really don't want to have a CPU - * access a freed page because it has a stale TLB - */ - if (tlbbatch->index) - __flush_tlb_pending(tlbbatch); - - pte_free_finish(); -} - -#else - extern void tlb_flush(struct mmu_gather *tlb); -#endif - /* Get the generic bits... */ #include <asm-generic/tlb.h> -#if !defined(CONFIG_PPC_STD_MMU) || defined(__powerpc64__) - -#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while (0) - -#else extern void flush_hash_entry(struct mm_struct *mm, pte_t *ptep, unsigned long address); static inline void __tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep, - unsigned long address) + unsigned long address) { +#ifdef CONFIG_PPC_STD_MMU_32 if (pte_val(*ptep) & _PAGE_HASHPTE) flush_hash_entry(tlb->mm, ptep, address); +#endif } -#endif #endif /* __KERNEL__ */ #endif /* __ASM_POWERPC_TLB_H */ diff --git a/arch/powerpc/include/asm/tlbflush.h b/arch/powerpc/include/asm/tlbflush.h index abbe3419d1dd..d50a380b2b6f 100644 --- a/arch/powerpc/include/asm/tlbflush.h +++ b/arch/powerpc/include/asm/tlbflush.h @@ -6,7 +6,7 @@ * * - flush_tlb_mm(mm) flushes the specified mm context TLB's * - flush_tlb_page(vma, vmaddr) flushes one page - * - local_flush_tlb_mm(mm) flushes the specified mm context on + * - local_flush_tlb_mm(mm, full) flushes the specified mm context on * the local processor * - local_flush_tlb_page(vma, vmaddr) flushes one page on the local processor * - flush_tlb_page_nohash(vma, vmaddr) flushes one page if SW loaded TLB @@ -29,7 +29,8 @@ * specific tlbie's */ -#include <linux/mm.h> +struct vm_area_struct; +struct mm_struct; #define MMU_NO_CONTEXT ((unsigned int)-1) @@ -40,12 +41,18 @@ extern void flush_tlb_kernel_range(unsigned long start, unsigned long end); extern void local_flush_tlb_mm(struct mm_struct *mm); extern void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr); +extern void __local_flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr, + int tsize, int ind); + #ifdef CONFIG_SMP extern void flush_tlb_mm(struct mm_struct *mm); extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr); +extern void __flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr, + int tsize, int ind); #else #define flush_tlb_mm(mm) local_flush_tlb_mm(mm) #define flush_tlb_page(vma,addr) local_flush_tlb_page(vma,addr) +#define __flush_tlb_page(mm,addr,p,i) __local_flush_tlb_page(mm,addr,p,i) #endif #define flush_tlb_page_nohash(vma,addr) flush_tlb_page(vma,addr) diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h index 054a16d68082..394edcbcce71 100644 --- a/arch/powerpc/include/asm/topology.h +++ b/arch/powerpc/include/asm/topology.h @@ -57,14 +57,13 @@ static inline int pcibus_to_node(struct pci_bus *bus) .cache_nice_tries = 1, \ .busy_idx = 3, \ .idle_idx = 1, \ - .newidle_idx = 2, \ - .wake_idx = 1, \ + .newidle_idx = 0, \ + .wake_idx = 0, \ .flags = SD_LOAD_BALANCE \ | SD_BALANCE_EXEC \ + | SD_BALANCE_FORK \ | SD_BALANCE_NEWIDLE \ - | SD_WAKE_IDLE \ - | SD_SERIALIZE \ - | SD_WAKE_BALANCE, \ + | SD_SERIALIZE, \ .last_balance = jiffies, \ .balance_interval = 1, \ .nr_balance_failed = 0, \ diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h index cef080bfc607..f6ca76176766 100644 --- a/arch/powerpc/include/asm/unistd.h +++ b/arch/powerpc/include/asm/unistd.h @@ -341,7 +341,7 @@ #define __NR_dup3 316 #define __NR_pipe2 317 #define __NR_inotify_init1 318 -#define __NR_perf_counter_open 319 +#define __NR_perf_event_open 319 #define __NR_preadv 320 #define __NR_pwritev 321 #define __NR_rt_tgsigqueueinfo 322 diff --git a/arch/powerpc/include/asm/vdso.h b/arch/powerpc/include/asm/vdso.h index 26fc449bd989..dc0419b66f17 100644 --- a/arch/powerpc/include/asm/vdso.h +++ b/arch/powerpc/include/asm/vdso.h @@ -7,9 +7,8 @@ #define VDSO32_LBASE 0x100000 #define VDSO64_LBASE 0x100000 -/* Default map addresses */ +/* Default map addresses for 32bit vDSO */ #define VDSO32_MBASE VDSO32_LBASE -#define VDSO64_MBASE VDSO64_LBASE #define VDSO_VERSION_STRING LINUX_2.6.15 diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index b73396b93905..b23664a0b86c 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -33,10 +33,10 @@ obj-y := cputable.o ptrace.o syscalls.o \ obj-y += vdso32/ obj-$(CONFIG_PPC64) += setup_64.o sys_ppc32.o \ signal_64.o ptrace32.o \ - paca.o cpu_setup_ppc970.o \ - cpu_setup_pa6t.o \ - firmware.o nvram_64.o + paca.o nvram_64.o firmware.o +obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_ppc970.o cpu_setup_pa6t.o obj64-$(CONFIG_RELOCATABLE) += reloc_64.o +obj-$(CONFIG_PPC_BOOK3E_64) += exceptions-64e.o obj-$(CONFIG_PPC64) += vdso64/ obj-$(CONFIG_ALTIVEC) += vecemu.o obj-$(CONFIG_PPC_970_NAP) += idle_power4.o @@ -63,8 +63,8 @@ obj-$(CONFIG_MODULES) += module.o module_$(CONFIG_WORD_SIZE).o obj-$(CONFIG_44x) += cpu_setup_44x.o obj-$(CONFIG_FSL_BOOKE) += cpu_setup_fsl_booke.o dbell.o -extra-$(CONFIG_PPC_STD_MMU) := head_32.o -extra-$(CONFIG_PPC64) := head_64.o +extra-y := head_$(CONFIG_WORD_SIZE).o +extra-$(CONFIG_PPC_BOOK3E_32) := head_new_booke.o extra-$(CONFIG_40x) := head_40x.o extra-$(CONFIG_44x) := head_44x.o extra-$(CONFIG_FSL_BOOKE) := head_fsl_booke.o @@ -88,7 +88,7 @@ obj-$(CONFIG_SWIOTLB) += dma-swiotlb.o pci64-$(CONFIG_PPC64) += pci_dn.o isa-bridge.o obj-$(CONFIG_PCI) += pci_$(CONFIG_WORD_SIZE).o $(pci64-y) \ - pci-common.o + pci-common.o pci_of_scan.o obj-$(CONFIG_PCI_MSI) += msi.o obj-$(CONFIG_KEXEC) += machine_kexec.o crash.o \ machine_kexec_$(CONFIG_WORD_SIZE).o @@ -97,7 +97,7 @@ obj64-$(CONFIG_AUDIT) += compat_audit.o obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o -obj-$(CONFIG_PPC_PERF_CTRS) += perf_counter.o +obj-$(CONFIG_PPC_PERF_CTRS) += perf_event.o perf_callchain.o obj64-$(CONFIG_PPC_PERF_CTRS) += power4-pmu.o ppc970-pmu.o power5-pmu.o \ power5+-pmu.o power6-pmu.o power7-pmu.o obj32-$(CONFIG_PPC_PERF_CTRS) += mpc7450-pmu.o @@ -115,6 +115,13 @@ ifneq ($(CONFIG_XMON)$(CONFIG_KEXEC),) obj-y += ppc_save_regs.o endif +# Disable GCOV in odd or sensitive code +GCOV_PROFILE_prom_init.o := n +GCOV_PROFILE_ftrace.o := n +GCOV_PROFILE_machine_kexec_64.o := n +GCOV_PROFILE_machine_kexec_32.o := n +GCOV_PROFILE_kprobes.o := n + extra-$(CONFIG_PPC_FPU) += fpu.o extra-$(CONFIG_ALTIVEC) += vector.o extra-$(CONFIG_PPC64) += entry_64.o diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 561b64652311..0812b0f414bb 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -52,9 +52,11 @@ #include <linux/kvm_host.h> #endif +#ifdef CONFIG_PPC32 #if defined(CONFIG_BOOKE) || defined(CONFIG_40x) #include "head_booke.h" #endif +#endif #if defined(CONFIG_FSL_BOOKE) #include "../mm/mmu_decl.h" @@ -67,6 +69,8 @@ int main(void) DEFINE(MMCONTEXTID, offsetof(struct mm_struct, context.id)); #ifdef CONFIG_PPC64 DEFINE(AUDITCONTEXT, offsetof(struct task_struct, audit_context)); + DEFINE(SIGSEGV, SIGSEGV); + DEFINE(NMI_MASK, NMI_MASK); #else DEFINE(THREAD_INFO, offsetof(struct task_struct, stack)); #endif /* CONFIG_PPC64 */ @@ -129,7 +133,7 @@ int main(void) DEFINE(PACAKMSR, offsetof(struct paca_struct, kernel_msr)); DEFINE(PACASOFTIRQEN, offsetof(struct paca_struct, soft_enabled)); DEFINE(PACAHARDIRQEN, offsetof(struct paca_struct, hard_enabled)); - DEFINE(PACAPERFPEND, offsetof(struct paca_struct, perf_counter_pending)); + DEFINE(PACAPERFPEND, offsetof(struct paca_struct, perf_event_pending)); DEFINE(PACACONTEXTID, offsetof(struct paca_struct, context.id)); #ifdef CONFIG_PPC_MM_SLICES DEFINE(PACALOWSLICESPSIZE, offsetof(struct paca_struct, @@ -138,6 +142,20 @@ int main(void) context.high_slices_psize)); DEFINE(MMUPSIZEDEFSIZE, sizeof(struct mmu_psize_def)); #endif /* CONFIG_PPC_MM_SLICES */ + +#ifdef CONFIG_PPC_BOOK3E + DEFINE(PACAPGD, offsetof(struct paca_struct, pgd)); + DEFINE(PACA_KERNELPGD, offsetof(struct paca_struct, kernel_pgd)); + DEFINE(PACA_EXGEN, offsetof(struct paca_struct, exgen)); + DEFINE(PACA_EXTLB, offsetof(struct paca_struct, extlb)); + DEFINE(PACA_EXMC, offsetof(struct paca_struct, exmc)); + DEFINE(PACA_EXCRIT, offsetof(struct paca_struct, excrit)); + DEFINE(PACA_EXDBG, offsetof(struct paca_struct, exdbg)); + DEFINE(PACA_MC_STACK, offsetof(struct paca_struct, mc_kstack)); + DEFINE(PACA_CRIT_STACK, offsetof(struct paca_struct, crit_kstack)); + DEFINE(PACA_DBG_STACK, offsetof(struct paca_struct, dbg_kstack)); +#endif /* CONFIG_PPC_BOOK3E */ + #ifdef CONFIG_PPC_STD_MMU_64 DEFINE(PACASTABREAL, offsetof(struct paca_struct, stab_real)); DEFINE(PACASTABVIRT, offsetof(struct paca_struct, stab_addr)); @@ -260,6 +278,7 @@ int main(void) DEFINE(_SRR1, STACK_FRAME_OVERHEAD+sizeof(struct pt_regs)+8); #endif /* CONFIG_PPC64 */ +#if defined(CONFIG_PPC32) #if defined(CONFIG_BOOKE) || defined(CONFIG_40x) DEFINE(EXC_LVL_SIZE, STACK_EXC_LVL_FRAME_SIZE); DEFINE(MAS0, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas0)); @@ -278,7 +297,7 @@ int main(void) DEFINE(_DSRR1, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, dsrr1)); DEFINE(SAVED_KSP_LIMIT, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, saved_ksp_limit)); #endif - +#endif DEFINE(CLONE_VM, CLONE_VM); DEFINE(CLONE_UNTRACED, CLONE_UNTRACED); diff --git a/arch/powerpc/kernel/cpu_setup_6xx.S b/arch/powerpc/kernel/cpu_setup_6xx.S index 1e9949e68856..55cba4a8a959 100644 --- a/arch/powerpc/kernel/cpu_setup_6xx.S +++ b/arch/powerpc/kernel/cpu_setup_6xx.S @@ -21,7 +21,7 @@ _GLOBAL(__setup_cpu_603) mflr r4 BEGIN_MMU_FTR_SECTION li r10,0 - mtspr SPRN_SPRG4,r10 /* init SW LRU tracking */ + mtspr SPRN_SPRG_603_LRU,r10 /* init SW LRU tracking */ END_MMU_FTR_SECTION_IFSET(MMU_FTR_NEED_DTLB_SW_LRU) BEGIN_FTR_SECTION bl __init_fpu_registers diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 4a24a2fc4574..0b9c9135922e 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -89,11 +89,15 @@ extern void __restore_cpu_power7(void); #define COMMON_USER_PA6T (COMMON_USER_PPC64 | PPC_FEATURE_PA6T |\ PPC_FEATURE_TRUE_LE | \ PPC_FEATURE_HAS_ALTIVEC_COMP) +#ifdef CONFIG_PPC_BOOK3E_64 +#define COMMON_USER_BOOKE (COMMON_USER_PPC64 | PPC_FEATURE_BOOKE) +#else #define COMMON_USER_BOOKE (PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | \ PPC_FEATURE_BOOKE) +#endif static struct cpu_spec __initdata cpu_specs[] = { -#ifdef CONFIG_PPC64 +#ifdef CONFIG_PPC_BOOK3S_64 { /* Power3 */ .pvr_mask = 0xffff0000, .pvr_value = 0x00400000, @@ -508,7 +512,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .machine_check = machine_check_generic, .platform = "power4", } -#endif /* CONFIG_PPC64 */ +#endif /* CONFIG_PPC_BOOK3S_64 */ + #ifdef CONFIG_PPC32 #if CLASSIC_PPC { /* 601 */ @@ -1630,7 +1635,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .platform = "ppc440", }, { /* 460EX */ - .pvr_mask = 0xffff0002, + .pvr_mask = 0xffff0006, .pvr_value = 0x13020002, .cpu_name = "460EX", .cpu_features = CPU_FTRS_440x6, @@ -1642,8 +1647,21 @@ static struct cpu_spec __initdata cpu_specs[] = { .machine_check = machine_check_440A, .platform = "ppc440", }, + { /* 460EX Rev B */ + .pvr_mask = 0xffff0007, + .pvr_value = 0x13020004, + .cpu_name = "460EX Rev. B", + .cpu_features = CPU_FTRS_440x6, + .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU, + .mmu_features = MMU_FTR_TYPE_44x, + .icache_bsize = 32, + .dcache_bsize = 32, + .cpu_setup = __setup_cpu_460ex, + .machine_check = machine_check_440A, + .platform = "ppc440", + }, { /* 460GT */ - .pvr_mask = 0xffff0002, + .pvr_mask = 0xffff0006, .pvr_value = 0x13020000, .cpu_name = "460GT", .cpu_features = CPU_FTRS_440x6, @@ -1655,6 +1673,19 @@ static struct cpu_spec __initdata cpu_specs[] = { .machine_check = machine_check_440A, .platform = "ppc440", }, + { /* 460GT Rev B */ + .pvr_mask = 0xffff0007, + .pvr_value = 0x13020005, + .cpu_name = "460GT Rev. B", + .cpu_features = CPU_FTRS_440x6, + .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU, + .mmu_features = MMU_FTR_TYPE_44x, + .icache_bsize = 32, + .dcache_bsize = 32, + .cpu_setup = __setup_cpu_460gt, + .machine_check = machine_check_440A, + .platform = "ppc440", + }, { /* 460SX */ .pvr_mask = 0xffffff00, .pvr_value = 0x13541800, @@ -1797,6 +1828,29 @@ static struct cpu_spec __initdata cpu_specs[] = { } #endif /* CONFIG_E500 */ #endif /* CONFIG_PPC32 */ + +#ifdef CONFIG_PPC_BOOK3E_64 + { /* This is a default entry to get going, to be replaced by + * a real one at some stage + */ +#define CPU_FTRS_BASE_BOOK3E (CPU_FTR_USE_TB | \ + CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_SMT | \ + CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE) + .pvr_mask = 0x00000000, + .pvr_value = 0x00000000, + .cpu_name = "Book3E", + .cpu_features = CPU_FTRS_BASE_BOOK3E, + .cpu_user_features = COMMON_USER_PPC64, + .mmu_features = MMU_FTR_TYPE_3E | MMU_FTR_USE_TLBILX | + MMU_FTR_USE_TLBIVAX_BCAST | + MMU_FTR_LOCK_BCAST_INVAL, + .icache_bsize = 64, + .dcache_bsize = 64, + .num_pmcs = 0, + .machine_check = machine_check_generic, + .platform = "power6", + }, +#endif }; static struct cpu_spec the_cpu_spec; diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c index 2983adac8cc3..87ddb3fb948c 100644 --- a/arch/powerpc/kernel/dma-iommu.c +++ b/arch/powerpc/kernel/dma-iommu.c @@ -89,7 +89,7 @@ static int dma_iommu_dma_supported(struct device *dev, u64 mask) return 1; } -struct dma_mapping_ops dma_iommu_ops = { +struct dma_map_ops dma_iommu_ops = { .alloc_coherent = dma_iommu_alloc_coherent, .free_coherent = dma_iommu_free_coherent, .map_sg = dma_iommu_map_sg, diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c index 68ccf11e4f19..e96cbbd9b449 100644 --- a/arch/powerpc/kernel/dma-swiotlb.c +++ b/arch/powerpc/kernel/dma-swiotlb.c @@ -24,71 +24,6 @@ int swiotlb __read_mostly; unsigned int ppc_swiotlb_enable; -void *swiotlb_bus_to_virt(struct device *hwdev, dma_addr_t addr) -{ - unsigned long pfn = PFN_DOWN(swiotlb_bus_to_phys(hwdev, addr)); - void *pageaddr = page_address(pfn_to_page(pfn)); - - if (pageaddr != NULL) - return pageaddr + (addr % PAGE_SIZE); - return NULL; -} - -dma_addr_t swiotlb_phys_to_bus(struct device *hwdev, phys_addr_t paddr) -{ - return paddr + get_dma_direct_offset(hwdev); -} - -phys_addr_t swiotlb_bus_to_phys(struct device *hwdev, dma_addr_t baddr) - -{ - return baddr - get_dma_direct_offset(hwdev); -} - -/* - * Determine if an address needs bounce buffering via swiotlb. - * Going forward I expect the swiotlb code to generalize on using - * a dma_ops->addr_needs_map, and this function will move from here to the - * generic swiotlb code. - */ -int -swiotlb_arch_address_needs_mapping(struct device *hwdev, dma_addr_t addr, - size_t size) -{ - struct dma_mapping_ops *dma_ops = get_dma_ops(hwdev); - - BUG_ON(!dma_ops); - return dma_ops->addr_needs_map(hwdev, addr, size); -} - -/* - * Determine if an address is reachable by a pci device, or if we must bounce. - */ -static int -swiotlb_pci_addr_needs_map(struct device *hwdev, dma_addr_t addr, size_t size) -{ - u64 mask = dma_get_mask(hwdev); - dma_addr_t max; - struct pci_controller *hose; - struct pci_dev *pdev = to_pci_dev(hwdev); - - hose = pci_bus_to_host(pdev->bus); - max = hose->dma_window_base_cur + hose->dma_window_size; - - /* check that we're within mapped pci window space */ - if ((addr + size > max) | (addr < hose->dma_window_base_cur)) - return 1; - - return !is_buffer_dma_capable(mask, addr, size); -} - -static int -swiotlb_addr_needs_map(struct device *hwdev, dma_addr_t addr, size_t size) -{ - return !is_buffer_dma_capable(dma_get_mask(hwdev), addr, size); -} - - /* * At the moment, all platforms that use this code only require * swiotlb to be used if we're operating on HIGHMEM. Since @@ -96,7 +31,7 @@ swiotlb_addr_needs_map(struct device *hwdev, dma_addr_t addr, size_t size) * map_page, and unmap_page on highmem, use normal dma_ops * for everything else. */ -struct dma_mapping_ops swiotlb_dma_ops = { +struct dma_map_ops swiotlb_dma_ops = { .alloc_coherent = dma_direct_alloc_coherent, .free_coherent = dma_direct_free_coherent, .map_sg = swiotlb_map_sg_attrs, @@ -104,37 +39,37 @@ struct dma_mapping_ops swiotlb_dma_ops = { .dma_supported = swiotlb_dma_supported, .map_page = swiotlb_map_page, .unmap_page = swiotlb_unmap_page, - .addr_needs_map = swiotlb_addr_needs_map, .sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu, .sync_single_range_for_device = swiotlb_sync_single_range_for_device, .sync_sg_for_cpu = swiotlb_sync_sg_for_cpu, - .sync_sg_for_device = swiotlb_sync_sg_for_device + .sync_sg_for_device = swiotlb_sync_sg_for_device, + .mapping_error = swiotlb_dma_mapping_error, }; -struct dma_mapping_ops swiotlb_pci_dma_ops = { - .alloc_coherent = dma_direct_alloc_coherent, - .free_coherent = dma_direct_free_coherent, - .map_sg = swiotlb_map_sg_attrs, - .unmap_sg = swiotlb_unmap_sg_attrs, - .dma_supported = swiotlb_dma_supported, - .map_page = swiotlb_map_page, - .unmap_page = swiotlb_unmap_page, - .addr_needs_map = swiotlb_pci_addr_needs_map, - .sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu, - .sync_single_range_for_device = swiotlb_sync_single_range_for_device, - .sync_sg_for_cpu = swiotlb_sync_sg_for_cpu, - .sync_sg_for_device = swiotlb_sync_sg_for_device -}; +void pci_dma_dev_setup_swiotlb(struct pci_dev *pdev) +{ + struct pci_controller *hose; + struct dev_archdata *sd; + + hose = pci_bus_to_host(pdev->bus); + sd = &pdev->dev.archdata; + sd->max_direct_dma_addr = + hose->dma_window_base_cur + hose->dma_window_size; +} static int ppc_swiotlb_bus_notify(struct notifier_block *nb, unsigned long action, void *data) { struct device *dev = data; + struct dev_archdata *sd; /* We are only intereted in device addition */ if (action != BUS_NOTIFY_ADD_DEVICE) return 0; + sd = &dev->archdata; + sd->max_direct_dma_addr = 0; + /* May need to bounce if the device can't address all of DRAM */ if (dma_get_mask(dev) < lmb_end_of_DRAM()) set_dma_ops(dev, &swiotlb_dma_ops); diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c index ccf129d47d84..21b784d7e7d0 100644 --- a/arch/powerpc/kernel/dma.c +++ b/arch/powerpc/kernel/dma.c @@ -7,6 +7,7 @@ #include <linux/device.h> #include <linux/dma-mapping.h> +#include <linux/dma-debug.h> #include <linux/lmb.h> #include <asm/bug.h> #include <asm/abs_addr.h> @@ -140,7 +141,7 @@ static inline void dma_direct_sync_single_range(struct device *dev, } #endif -struct dma_mapping_ops dma_direct_ops = { +struct dma_map_ops dma_direct_ops = { .alloc_coherent = dma_direct_alloc_coherent, .free_coherent = dma_direct_free_coherent, .map_sg = dma_direct_map_sg, @@ -156,3 +157,13 @@ struct dma_mapping_ops dma_direct_ops = { #endif }; EXPORT_SYMBOL(dma_direct_ops); + +#define PREALLOC_DMA_DEBUG_ENTRIES (1 << 16) + +static int __init dma_init(void) +{ + dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES); + + return 0; +} +fs_initcall(dma_init); diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index 3cadba60a4b6..1175a8539e6c 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -88,7 +88,7 @@ crit_transfer_to_handler: mfspr r0,SPRN_SRR1 stw r0,_SRR1(r11) - mfspr r8,SPRN_SPRG3 + mfspr r8,SPRN_SPRG_THREAD lwz r0,KSP_LIMIT(r8) stw r0,SAVED_KSP_LIMIT(r11) rlwimi r0,r1,0,0,(31-THREAD_SHIFT) @@ -108,7 +108,7 @@ crit_transfer_to_handler: mfspr r0,SPRN_SRR1 stw r0,crit_srr1@l(0) - mfspr r8,SPRN_SPRG3 + mfspr r8,SPRN_SPRG_THREAD lwz r0,KSP_LIMIT(r8) stw r0,saved_ksp_limit@l(0) rlwimi r0,r1,0,0,(31-THREAD_SHIFT) @@ -138,7 +138,7 @@ transfer_to_handler: mfspr r2,SPRN_XER stw r12,_CTR(r11) stw r2,_XER(r11) - mfspr r12,SPRN_SPRG3 + mfspr r12,SPRN_SPRG_THREAD addi r2,r12,-THREAD tovirt(r2,r2) /* set r2 to current */ beq 2f /* if from user, fix up THREAD.regs */ @@ -680,7 +680,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_SPE) tophys(r0,r4) CLR_TOP32(r0) - mtspr SPRN_SPRG3,r0 /* Update current THREAD phys addr */ + mtspr SPRN_SPRG_THREAD,r0 /* Update current THREAD phys addr */ lwz r1,KSP(r4) /* Load new stack pointer */ /* save the old current 'last' for return value */ @@ -1057,7 +1057,7 @@ exc_exit_restart_end: #ifdef CONFIG_40x .globl ret_from_crit_exc ret_from_crit_exc: - mfspr r9,SPRN_SPRG3 + mfspr r9,SPRN_SPRG_THREAD lis r10,saved_ksp_limit@ha; lwz r10,saved_ksp_limit@l(r10); tovirt(r9,r9); @@ -1074,7 +1074,7 @@ ret_from_crit_exc: #ifdef CONFIG_BOOKE .globl ret_from_crit_exc ret_from_crit_exc: - mfspr r9,SPRN_SPRG3 + mfspr r9,SPRN_SPRG_THREAD lwz r10,SAVED_KSP_LIMIT(r1) stw r10,KSP_LIMIT(r9) RESTORE_xSRR(SRR0,SRR1); @@ -1083,7 +1083,7 @@ ret_from_crit_exc: .globl ret_from_debug_exc ret_from_debug_exc: - mfspr r9,SPRN_SPRG3 + mfspr r9,SPRN_SPRG_THREAD lwz r10,SAVED_KSP_LIMIT(r1) stw r10,KSP_LIMIT(r9) lwz r9,THREAD_INFO-THREAD(r9) @@ -1097,7 +1097,7 @@ ret_from_debug_exc: .globl ret_from_mcheck_exc ret_from_mcheck_exc: - mfspr r9,SPRN_SPRG3 + mfspr r9,SPRN_SPRG_THREAD lwz r10,SAVED_KSP_LIMIT(r1) stw r10,KSP_LIMIT(r9) RESTORE_xSRR(SRR0,SRR1); @@ -1255,7 +1255,7 @@ _GLOBAL(enter_rtas) MTMSRD(r0) /* don't get trashed */ li r9,MSR_KERNEL & ~(MSR_IR|MSR_DR) mtlr r6 - mtspr SPRN_SPRG2,r7 + mtspr SPRN_SPRG_RTAS,r7 mtspr SPRN_SRR0,r8 mtspr SPRN_SRR1,r9 RFI @@ -1265,7 +1265,7 @@ _GLOBAL(enter_rtas) FIX_SRR1(r9,r0) addi r1,r1,INT_FRAME_SIZE li r0,0 - mtspr SPRN_SPRG2,r0 + mtspr SPRN_SPRG_RTAS,r0 mtspr SPRN_SRR0,r8 mtspr SPRN_SRR1,r9 RFI /* return to caller */ diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 43e073477c34..900e0eea0099 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -120,9 +120,15 @@ BEGIN_FW_FTR_SECTION 2: END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) #endif /* CONFIG_PPC_ISERIES */ + + /* Hard enable interrupts */ +#ifdef CONFIG_PPC_BOOK3E + wrteei 1 +#else mfmsr r11 ori r11,r11,MSR_EE mtmsrd r11,1 +#endif /* CONFIG_PPC_BOOK3E */ #ifdef SHOW_SYSCALLS bl .do_show_syscall @@ -168,15 +174,25 @@ syscall_exit: #endif clrrdi r12,r1,THREAD_SHIFT - /* disable interrupts so current_thread_info()->flags can't change, - and so that we don't get interrupted after loading SRR0/1. */ ld r8,_MSR(r1) +#ifdef CONFIG_PPC_BOOK3S + /* No MSR:RI on BookE */ andi. r10,r8,MSR_RI beq- unrecov_restore +#endif + + /* Disable interrupts so current_thread_info()->flags can't change, + * and so that we don't get interrupted after loading SRR0/1. + */ +#ifdef CONFIG_PPC_BOOK3E + wrteei 0 +#else mfmsr r10 rldicl r10,r10,48,1 rotldi r10,r10,16 mtmsrd r10,1 +#endif /* CONFIG_PPC_BOOK3E */ + ld r9,TI_FLAGS(r12) li r11,-_LAST_ERRNO andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK) @@ -194,9 +210,13 @@ syscall_error_cont: * userspace and we take an exception after restoring r13, * we end up corrupting the userspace r13 value. */ +#ifdef CONFIG_PPC_BOOK3S + /* No MSR:RI on BookE */ li r12,MSR_RI andc r11,r10,r12 mtmsrd r11,1 /* clear MSR.RI */ +#endif /* CONFIG_PPC_BOOK3S */ + beq- 1f ACCOUNT_CPU_USER_EXIT(r11, r12) ld r13,GPR13(r1) /* only restore r13 if returning to usermode */ @@ -206,7 +226,7 @@ syscall_error_cont: mtcr r5 mtspr SPRN_SRR0,r7 mtspr SPRN_SRR1,r8 - rfid + RFI b . /* prevent speculative execution */ syscall_error: @@ -276,9 +296,13 @@ syscall_exit_work: beq .ret_from_except_lite /* Re-enable interrupts */ +#ifdef CONFIG_PPC_BOOK3E + wrteei 1 +#else mfmsr r10 ori r10,r10,MSR_EE mtmsrd r10,1 +#endif /* CONFIG_PPC_BOOK3E */ bl .save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD @@ -380,7 +404,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) and. r0,r0,r22 beq+ 1f andc r22,r22,r0 - mtmsrd r22 + MTMSRD(r22) isync 1: std r20,_NIP(r1) mfcr r23 @@ -399,6 +423,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) std r6,PACACURRENT(r13) /* Set new 'current' */ ld r8,KSP(r4) /* new stack pointer */ +#ifdef CONFIG_PPC_BOOK3S BEGIN_FTR_SECTION BEGIN_FTR_SECTION_NESTED(95) clrrdi r6,r8,28 /* get its ESID */ @@ -445,8 +470,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_1T_SEGMENT) slbie r6 /* Workaround POWER5 < DD2.1 issue */ slbmte r7,r0 isync - 2: +#endif /* !CONFIG_PPC_BOOK3S */ + clrrdi r7,r8,THREAD_SHIFT /* base of new stack */ /* Note: this uses SWITCH_FRAME_SIZE rather than INT_FRAME_SIZE because we don't need to leave the 288-byte ABI gap at the @@ -490,10 +516,14 @@ _GLOBAL(ret_from_except_lite) * can't change between when we test it and when we return * from the interrupt. */ +#ifdef CONFIG_PPC_BOOK3E + wrteei 0 +#else mfmsr r10 /* Get current interrupt state */ rldicl r9,r10,48,1 /* clear MSR_EE */ rotldi r9,r9,16 mtmsrd r9,1 /* Update machine state */ +#endif /* CONFIG_PPC_BOOK3E */ #ifdef CONFIG_PREEMPT clrrdi r9,r1,THREAD_SHIFT /* current_thread_info() */ @@ -526,20 +556,23 @@ ALT_FW_FTR_SECTION_END_IFCLR(FW_FEATURE_ISERIES) 2: TRACE_AND_RESTORE_IRQ(r5); -#ifdef CONFIG_PERF_COUNTERS - /* check paca->perf_counter_pending if we're enabling ints */ +#ifdef CONFIG_PERF_EVENTS + /* check paca->perf_event_pending if we're enabling ints */ lbz r3,PACAPERFPEND(r13) and. r3,r3,r5 beq 27f - bl .perf_counter_do_pending + bl .perf_event_do_pending 27: -#endif /* CONFIG_PERF_COUNTERS */ +#endif /* CONFIG_PERF_EVENTS */ /* extract EE bit and use it to restore paca->hard_enabled */ ld r3,_MSR(r1) rldicl r4,r3,49,63 /* r0 = (r3 >> 15) & 1 */ stb r4,PACAHARDIRQEN(r13) +#ifdef CONFIG_PPC_BOOK3E + b .exception_return_book3e +#else ld r4,_CTR(r1) ld r0,_LINK(r1) mtctr r4 @@ -588,6 +621,8 @@ ALT_FW_FTR_SECTION_END_IFCLR(FW_FEATURE_ISERIES) rfid b . /* prevent speculative execution */ +#endif /* CONFIG_PPC_BOOK3E */ + iseries_check_pending_irqs: #ifdef CONFIG_PPC_ISERIES ld r5,SOFTE(r1) @@ -638,6 +673,11 @@ do_work: li r0,1 stb r0,PACASOFTIRQEN(r13) stb r0,PACAHARDIRQEN(r13) +#ifdef CONFIG_PPC_BOOK3E + wrteei 1 + bl .preempt_schedule + wrteei 0 +#else ori r10,r10,MSR_EE mtmsrd r10,1 /* reenable interrupts */ bl .preempt_schedule @@ -646,6 +686,7 @@ do_work: rldicl r10,r10,48,1 /* disable interrupts again */ rotldi r10,r10,16 mtmsrd r10,1 +#endif /* CONFIG_PPC_BOOK3E */ ld r4,TI_FLAGS(r9) andi. r0,r4,_TIF_NEED_RESCHED bne 1b @@ -654,8 +695,12 @@ do_work: user_work: #endif /* Enable interrupts */ +#ifdef CONFIG_PPC_BOOK3E + wrteei 1 +#else ori r10,r10,MSR_EE mtmsrd r10,1 +#endif /* CONFIG_PPC_BOOK3E */ andi. r0,r4,_TIF_NEED_RESCHED beq 1f @@ -762,7 +807,7 @@ _GLOBAL(enter_rtas) _STATIC(rtas_return_loc) /* relocation is off at this point */ - mfspr r4,SPRN_SPRG3 /* Get PACA */ + mfspr r4,SPRN_SPRG_PACA /* Get PACA */ clrldi r4,r4,2 /* convert to realmode address */ bcl 20,31,$+4 @@ -793,7 +838,7 @@ _STATIC(rtas_restore_regs) REST_8GPRS(14, r1) /* Restore the non-volatiles */ REST_10GPRS(22, r1) /* ditto */ - mfspr r13,SPRN_SPRG3 + mfspr r13,SPRN_SPRG_PACA ld r4,_CCR(r1) mtcr r4 @@ -823,33 +868,24 @@ _GLOBAL(enter_prom) * of all registers that it saves. We therefore save those registers * PROM might touch to the stack. (r0, r3-r13 are caller saved) */ - SAVE_8GPRS(2, r1) + SAVE_GPR(2, r1) SAVE_GPR(13, r1) SAVE_8GPRS(14, r1) SAVE_10GPRS(22, r1) - mfcr r4 - std r4,_CCR(r1) - mfctr r5 - std r5,_CTR(r1) - mfspr r6,SPRN_XER - std r6,_XER(r1) - mfdar r7 - std r7,_DAR(r1) - mfdsisr r8 - std r8,_DSISR(r1) - mfsrr0 r9 - std r9,_SRR0(r1) - mfsrr1 r10 - std r10,_SRR1(r1) + mfcr r10 mfmsr r11 + std r10,_CCR(r1) std r11,_MSR(r1) /* Get the PROM entrypoint */ - ld r0,GPR4(r1) - mtlr r0 + mtlr r4 /* Switch MSR to 32 bits mode */ +#ifdef CONFIG_PPC_BOOK3E + rlwinm r11,r11,0,1,31 + mtmsr r11 +#else /* CONFIG_PPC_BOOK3E */ mfmsr r11 li r12,1 rldicr r12,r12,MSR_SF_LG,(63-MSR_SF_LG) @@ -858,10 +894,10 @@ _GLOBAL(enter_prom) rldicr r12,r12,MSR_ISF_LG,(63-MSR_ISF_LG) andc r11,r11,r12 mtmsrd r11 +#endif /* CONFIG_PPC_BOOK3E */ isync - /* Restore arguments & enter PROM here... */ - ld r3,GPR3(r1) + /* Enter PROM here... */ blrl /* Just make sure that r1 top 32 bits didn't get @@ -871,7 +907,7 @@ _GLOBAL(enter_prom) /* Restore the MSR (back to 64 bits) */ ld r0,_MSR(r1) - mtmsrd r0 + MTMSRD(r0) isync /* Restore other registers */ @@ -881,18 +917,6 @@ _GLOBAL(enter_prom) REST_10GPRS(22, r1) ld r4,_CCR(r1) mtcr r4 - ld r5,_CTR(r1) - mtctr r5 - ld r6,_XER(r1) - mtspr SPRN_XER,r6 - ld r7,_DAR(r1) - mtdar r7 - ld r8,_DSISR(r1) - mtdsisr r8 - ld r9,_SRR0(r1) - mtsrr0 r9 - ld r10,_SRR1(r1) - mtsrr1 r10 addi r1,r1,PROM_FRAME_SIZE ld r0,16(r1) diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S new file mode 100644 index 000000000000..9048f96237f6 --- /dev/null +++ b/arch/powerpc/kernel/exceptions-64e.S @@ -0,0 +1,1001 @@ +/* + * Boot code and exception vectors for Book3E processors + * + * Copyright (C) 2007 Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/threads.h> +#include <asm/reg.h> +#include <asm/page.h> +#include <asm/ppc_asm.h> +#include <asm/asm-offsets.h> +#include <asm/cputable.h> +#include <asm/setup.h> +#include <asm/thread_info.h> +#include <asm/reg.h> +#include <asm/exception-64e.h> +#include <asm/bug.h> +#include <asm/irqflags.h> +#include <asm/ptrace.h> +#include <asm/ppc-opcode.h> +#include <asm/mmu.h> + +/* XXX This will ultimately add space for a special exception save + * structure used to save things like SRR0/SRR1, SPRGs, MAS, etc... + * when taking special interrupts. For now we don't support that, + * special interrupts from within a non-standard level will probably + * blow you up + */ +#define SPECIAL_EXC_FRAME_SIZE INT_FRAME_SIZE + +/* Exception prolog code for all exceptions */ +#define EXCEPTION_PROLOG(n, type, addition) \ + mtspr SPRN_SPRG_##type##_SCRATCH,r13; /* get spare registers */ \ + mfspr r13,SPRN_SPRG_PACA; /* get PACA */ \ + std r10,PACA_EX##type+EX_R10(r13); \ + std r11,PACA_EX##type+EX_R11(r13); \ + mfcr r10; /* save CR */ \ + addition; /* additional code for that exc. */ \ + std r1,PACA_EX##type+EX_R1(r13); /* save old r1 in the PACA */ \ + stw r10,PACA_EX##type+EX_CR(r13); /* save old CR in the PACA */ \ + mfspr r11,SPRN_##type##_SRR1;/* what are we coming from */ \ + type##_SET_KSTACK; /* get special stack if necessary */\ + andi. r10,r11,MSR_PR; /* save stack pointer */ \ + beq 1f; /* branch around if supervisor */ \ + ld r1,PACAKSAVE(r13); /* get kernel stack coming from usr */\ +1: cmpdi cr1,r1,0; /* check if SP makes sense */ \ + bge- cr1,exc_##n##_bad_stack;/* bad stack (TODO: out of line) */ \ + mfspr r10,SPRN_##type##_SRR0; /* read SRR0 before touching stack */ + +/* Exception type-specific macros */ +#define GEN_SET_KSTACK \ + subi r1,r1,INT_FRAME_SIZE; /* alloc frame on kernel stack */ +#define SPRN_GEN_SRR0 SPRN_SRR0 +#define SPRN_GEN_SRR1 SPRN_SRR1 + +#define CRIT_SET_KSTACK \ + ld r1,PACA_CRIT_STACK(r13); \ + subi r1,r1,SPECIAL_EXC_FRAME_SIZE; +#define SPRN_CRIT_SRR0 SPRN_CSRR0 +#define SPRN_CRIT_SRR1 SPRN_CSRR1 + +#define DBG_SET_KSTACK \ + ld r1,PACA_DBG_STACK(r13); \ + subi r1,r1,SPECIAL_EXC_FRAME_SIZE; +#define SPRN_DBG_SRR0 SPRN_DSRR0 +#define SPRN_DBG_SRR1 SPRN_DSRR1 + +#define MC_SET_KSTACK \ + ld r1,PACA_MC_STACK(r13); \ + subi r1,r1,SPECIAL_EXC_FRAME_SIZE; +#define SPRN_MC_SRR0 SPRN_MCSRR0 +#define SPRN_MC_SRR1 SPRN_MCSRR1 + +#define NORMAL_EXCEPTION_PROLOG(n, addition) \ + EXCEPTION_PROLOG(n, GEN, addition##_GEN) + +#define CRIT_EXCEPTION_PROLOG(n, addition) \ + EXCEPTION_PROLOG(n, CRIT, addition##_CRIT) + +#define DBG_EXCEPTION_PROLOG(n, addition) \ + EXCEPTION_PROLOG(n, DBG, addition##_DBG) + +#define MC_EXCEPTION_PROLOG(n, addition) \ + EXCEPTION_PROLOG(n, MC, addition##_MC) + + +/* Variants of the "addition" argument for the prolog + */ +#define PROLOG_ADDITION_NONE_GEN +#define PROLOG_ADDITION_NONE_CRIT +#define PROLOG_ADDITION_NONE_DBG +#define PROLOG_ADDITION_NONE_MC + +#define PROLOG_ADDITION_MASKABLE_GEN \ + lbz r11,PACASOFTIRQEN(r13); /* are irqs soft-disabled ? */ \ + cmpwi cr0,r11,0; /* yes -> go out of line */ \ + beq masked_interrupt_book3e; + +#define PROLOG_ADDITION_2REGS_GEN \ + std r14,PACA_EXGEN+EX_R14(r13); \ + std r15,PACA_EXGEN+EX_R15(r13) + +#define PROLOG_ADDITION_1REG_GEN \ + std r14,PACA_EXGEN+EX_R14(r13); + +#define PROLOG_ADDITION_2REGS_CRIT \ + std r14,PACA_EXCRIT+EX_R14(r13); \ + std r15,PACA_EXCRIT+EX_R15(r13) + +#define PROLOG_ADDITION_2REGS_DBG \ + std r14,PACA_EXDBG+EX_R14(r13); \ + std r15,PACA_EXDBG+EX_R15(r13) + +#define PROLOG_ADDITION_2REGS_MC \ + std r14,PACA_EXMC+EX_R14(r13); \ + std r15,PACA_EXMC+EX_R15(r13) + +/* Core exception code for all exceptions except TLB misses. + * XXX: Needs to make SPRN_SPRG_GEN depend on exception type + */ +#define EXCEPTION_COMMON(n, excf, ints) \ + std r0,GPR0(r1); /* save r0 in stackframe */ \ + std r2,GPR2(r1); /* save r2 in stackframe */ \ + SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \ + SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \ + std r9,GPR9(r1); /* save r9 in stackframe */ \ + std r10,_NIP(r1); /* save SRR0 to stackframe */ \ + std r11,_MSR(r1); /* save SRR1 to stackframe */ \ + ACCOUNT_CPU_USER_ENTRY(r10,r11);/* accounting (uses cr0+eq) */ \ + ld r3,excf+EX_R10(r13); /* get back r10 */ \ + ld r4,excf+EX_R11(r13); /* get back r11 */ \ + mfspr r5,SPRN_SPRG_GEN_SCRATCH;/* get back r13 */ \ + std r12,GPR12(r1); /* save r12 in stackframe */ \ + ld r2,PACATOC(r13); /* get kernel TOC into r2 */ \ + mflr r6; /* save LR in stackframe */ \ + mfctr r7; /* save CTR in stackframe */ \ + mfspr r8,SPRN_XER; /* save XER in stackframe */ \ + ld r9,excf+EX_R1(r13); /* load orig r1 back from PACA */ \ + lwz r10,excf+EX_CR(r13); /* load orig CR back from PACA */ \ + lbz r11,PACASOFTIRQEN(r13); /* get current IRQ softe */ \ + ld r12,exception_marker@toc(r2); \ + li r0,0; \ + std r3,GPR10(r1); /* save r10 to stackframe */ \ + std r4,GPR11(r1); /* save r11 to stackframe */ \ + std r5,GPR13(r1); /* save it to stackframe */ \ + std r6,_LINK(r1); \ + std r7,_CTR(r1); \ + std r8,_XER(r1); \ + li r3,(n)+1; /* indicate partial regs in trap */ \ + std r9,0(r1); /* store stack frame back link */ \ + std r10,_CCR(r1); /* store orig CR in stackframe */ \ + std r9,GPR1(r1); /* store stack frame back link */ \ + std r11,SOFTE(r1); /* and save it to stackframe */ \ + std r12,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */ \ + std r3,_TRAP(r1); /* set trap number */ \ + std r0,RESULT(r1); /* clear regs->result */ \ + ints; + +/* Variants for the "ints" argument */ +#define INTS_KEEP +#define INTS_DISABLE_SOFT \ + stb r0,PACASOFTIRQEN(r13); /* mark interrupts soft-disabled */ \ + TRACE_DISABLE_INTS; +#define INTS_DISABLE_HARD \ + stb r0,PACAHARDIRQEN(r13); /* and hard disabled */ +#define INTS_DISABLE_ALL \ + INTS_DISABLE_SOFT \ + INTS_DISABLE_HARD + +/* This is called by exceptions that used INTS_KEEP (that is did not clear + * neither soft nor hard IRQ indicators in the PACA. This will restore MSR:EE + * to it's previous value + * + * XXX In the long run, we may want to open-code it in order to separate the + * load from the wrtee, thus limiting the latency caused by the dependency + * but at this point, I'll favor code clarity until we have a near to final + * implementation + */ +#define INTS_RESTORE_HARD \ + ld r11,_MSR(r1); \ + wrtee r11; + +/* XXX FIXME: Restore r14/r15 when necessary */ +#define BAD_STACK_TRAMPOLINE(n) \ +exc_##n##_bad_stack: \ + li r1,(n); /* get exception number */ \ + sth r1,PACA_TRAP_SAVE(r13); /* store trap */ \ + b bad_stack_book3e; /* bad stack error */ + +#define EXCEPTION_STUB(loc, label) \ + . = interrupt_base_book3e + loc; \ + nop; /* To make debug interrupts happy */ \ + b exc_##label##_book3e; + +#define ACK_NONE(r) +#define ACK_DEC(r) \ + lis r,TSR_DIS@h; \ + mtspr SPRN_TSR,r +#define ACK_FIT(r) \ + lis r,TSR_FIS@h; \ + mtspr SPRN_TSR,r + +#define MASKABLE_EXCEPTION(trapnum, label, hdlr, ack) \ + START_EXCEPTION(label); \ + NORMAL_EXCEPTION_PROLOG(trapnum, PROLOG_ADDITION_MASKABLE) \ + EXCEPTION_COMMON(trapnum, PACA_EXGEN, INTS_DISABLE_ALL) \ + ack(r8); \ + addi r3,r1,STACK_FRAME_OVERHEAD; \ + bl hdlr; \ + b .ret_from_except_lite; + +/* This value is used to mark exception frames on the stack. */ + .section ".toc","aw" +exception_marker: + .tc ID_EXC_MARKER[TC],STACK_FRAME_REGS_MARKER + + +/* + * And here we have the exception vectors ! + */ + + .text + .balign 0x1000 + .globl interrupt_base_book3e +interrupt_base_book3e: /* fake trap */ + /* Note: If real debug exceptions are supported by the HW, the vector + * below will have to be patched up to point to an appropriate handler + */ + EXCEPTION_STUB(0x000, machine_check) /* 0x0200 */ + EXCEPTION_STUB(0x020, critical_input) /* 0x0580 */ + EXCEPTION_STUB(0x040, debug_crit) /* 0x0d00 */ + EXCEPTION_STUB(0x060, data_storage) /* 0x0300 */ + EXCEPTION_STUB(0x080, instruction_storage) /* 0x0400 */ + EXCEPTION_STUB(0x0a0, external_input) /* 0x0500 */ + EXCEPTION_STUB(0x0c0, alignment) /* 0x0600 */ + EXCEPTION_STUB(0x0e0, program) /* 0x0700 */ + EXCEPTION_STUB(0x100, fp_unavailable) /* 0x0800 */ + EXCEPTION_STUB(0x120, system_call) /* 0x0c00 */ + EXCEPTION_STUB(0x140, ap_unavailable) /* 0x0f20 */ + EXCEPTION_STUB(0x160, decrementer) /* 0x0900 */ + EXCEPTION_STUB(0x180, fixed_interval) /* 0x0980 */ + EXCEPTION_STUB(0x1a0, watchdog) /* 0x09f0 */ + EXCEPTION_STUB(0x1c0, data_tlb_miss) + EXCEPTION_STUB(0x1e0, instruction_tlb_miss) + +#if 0 + EXCEPTION_STUB(0x280, processor_doorbell) + EXCEPTION_STUB(0x220, processor_doorbell_crit) +#endif + .globl interrupt_end_book3e +interrupt_end_book3e: + +/* Critical Input Interrupt */ + START_EXCEPTION(critical_input); + CRIT_EXCEPTION_PROLOG(0x100, PROLOG_ADDITION_NONE) +// EXCEPTION_COMMON(0x100, PACA_EXCRIT, INTS_DISABLE_ALL) +// bl special_reg_save_crit +// addi r3,r1,STACK_FRAME_OVERHEAD +// bl .critical_exception +// b ret_from_crit_except + b . + +/* Machine Check Interrupt */ + START_EXCEPTION(machine_check); + CRIT_EXCEPTION_PROLOG(0x200, PROLOG_ADDITION_NONE) +// EXCEPTION_COMMON(0x200, PACA_EXMC, INTS_DISABLE_ALL) +// bl special_reg_save_mc +// addi r3,r1,STACK_FRAME_OVERHEAD +// bl .machine_check_exception +// b ret_from_mc_except + b . + +/* Data Storage Interrupt */ + START_EXCEPTION(data_storage) + NORMAL_EXCEPTION_PROLOG(0x300, PROLOG_ADDITION_2REGS) + mfspr r14,SPRN_DEAR + mfspr r15,SPRN_ESR + EXCEPTION_COMMON(0x300, PACA_EXGEN, INTS_KEEP) + b storage_fault_common + +/* Instruction Storage Interrupt */ + START_EXCEPTION(instruction_storage); + NORMAL_EXCEPTION_PROLOG(0x400, PROLOG_ADDITION_2REGS) + li r15,0 + mr r14,r10 + EXCEPTION_COMMON(0x400, PACA_EXGEN, INTS_KEEP) + b storage_fault_common + +/* External Input Interrupt */ + MASKABLE_EXCEPTION(0x500, external_input, .do_IRQ, ACK_NONE) + +/* Alignment */ + START_EXCEPTION(alignment); + NORMAL_EXCEPTION_PROLOG(0x600, PROLOG_ADDITION_2REGS) + mfspr r14,SPRN_DEAR + mfspr r15,SPRN_ESR + EXCEPTION_COMMON(0x600, PACA_EXGEN, INTS_KEEP) + b alignment_more /* no room, go out of line */ + +/* Program Interrupt */ + START_EXCEPTION(program); + NORMAL_EXCEPTION_PROLOG(0x700, PROLOG_ADDITION_1REG) + mfspr r14,SPRN_ESR + EXCEPTION_COMMON(0x700, PACA_EXGEN, INTS_DISABLE_SOFT) + std r14,_DSISR(r1) + addi r3,r1,STACK_FRAME_OVERHEAD + ld r14,PACA_EXGEN+EX_R14(r13) + bl .save_nvgprs + INTS_RESTORE_HARD + bl .program_check_exception + b .ret_from_except + +/* Floating Point Unavailable Interrupt */ + START_EXCEPTION(fp_unavailable); + NORMAL_EXCEPTION_PROLOG(0x800, PROLOG_ADDITION_NONE) + /* we can probably do a shorter exception entry for that one... */ + EXCEPTION_COMMON(0x800, PACA_EXGEN, INTS_KEEP) + bne 1f /* if from user, just load it up */ + bl .save_nvgprs + addi r3,r1,STACK_FRAME_OVERHEAD + INTS_RESTORE_HARD + bl .kernel_fp_unavailable_exception + BUG_OPCODE +1: ld r12,_MSR(r1) + bl .load_up_fpu + b fast_exception_return + +/* Decrementer Interrupt */ + MASKABLE_EXCEPTION(0x900, decrementer, .timer_interrupt, ACK_DEC) + +/* Fixed Interval Timer Interrupt */ + MASKABLE_EXCEPTION(0x980, fixed_interval, .unknown_exception, ACK_FIT) + +/* Watchdog Timer Interrupt */ + START_EXCEPTION(watchdog); + CRIT_EXCEPTION_PROLOG(0x9f0, PROLOG_ADDITION_NONE) +// EXCEPTION_COMMON(0x9f0, PACA_EXCRIT, INTS_DISABLE_ALL) +// bl special_reg_save_crit +// addi r3,r1,STACK_FRAME_OVERHEAD +// bl .unknown_exception +// b ret_from_crit_except + b . + +/* System Call Interrupt */ + START_EXCEPTION(system_call) + mr r9,r13 /* keep a copy of userland r13 */ + mfspr r11,SPRN_SRR0 /* get return address */ + mfspr r12,SPRN_SRR1 /* get previous MSR */ + mfspr r13,SPRN_SPRG_PACA /* get our PACA */ + b system_call_common + +/* Auxillary Processor Unavailable Interrupt */ + START_EXCEPTION(ap_unavailable); + NORMAL_EXCEPTION_PROLOG(0xf20, PROLOG_ADDITION_NONE) + EXCEPTION_COMMON(0xf20, PACA_EXGEN, INTS_KEEP) + addi r3,r1,STACK_FRAME_OVERHEAD + bl .save_nvgprs + INTS_RESTORE_HARD + bl .unknown_exception + b .ret_from_except + +/* Debug exception as a critical interrupt*/ + START_EXCEPTION(debug_crit); + CRIT_EXCEPTION_PROLOG(0xd00, PROLOG_ADDITION_2REGS) + + /* + * If there is a single step or branch-taken exception in an + * exception entry sequence, it was probably meant to apply to + * the code where the exception occurred (since exception entry + * doesn't turn off DE automatically). We simulate the effect + * of turning off DE on entry to an exception handler by turning + * off DE in the CSRR1 value and clearing the debug status. + */ + + mfspr r14,SPRN_DBSR /* check single-step/branch taken */ + andis. r15,r14,DBSR_IC@h + beq+ 1f + + LOAD_REG_IMMEDIATE(r14,interrupt_base_book3e) + LOAD_REG_IMMEDIATE(r15,interrupt_end_book3e) + cmpld cr0,r10,r14 + cmpld cr1,r10,r15 + blt+ cr0,1f + bge+ cr1,1f + + /* here it looks like we got an inappropriate debug exception. */ + lis r14,DBSR_IC@h /* clear the IC event */ + rlwinm r11,r11,0,~MSR_DE /* clear DE in the CSRR1 value */ + mtspr SPRN_DBSR,r14 + mtspr SPRN_CSRR1,r11 + lwz r10,PACA_EXCRIT+EX_CR(r13) /* restore registers */ + ld r1,PACA_EXCRIT+EX_R1(r13) + ld r14,PACA_EXCRIT+EX_R14(r13) + ld r15,PACA_EXCRIT+EX_R15(r13) + mtcr r10 + ld r10,PACA_EXCRIT+EX_R10(r13) /* restore registers */ + ld r11,PACA_EXCRIT+EX_R11(r13) + mfspr r13,SPRN_SPRG_CRIT_SCRATCH + rfci + + /* Normal debug exception */ + /* XXX We only handle coming from userspace for now since we can't + * quite save properly an interrupted kernel state yet + */ +1: andi. r14,r11,MSR_PR; /* check for userspace again */ + beq kernel_dbg_exc; /* if from kernel mode */ + + /* Now we mash up things to make it look like we are coming on a + * normal exception + */ + mfspr r15,SPRN_SPRG_CRIT_SCRATCH + mtspr SPRN_SPRG_GEN_SCRATCH,r15 + mfspr r14,SPRN_DBSR + EXCEPTION_COMMON(0xd00, PACA_EXCRIT, INTS_DISABLE_ALL) + std r14,_DSISR(r1) + addi r3,r1,STACK_FRAME_OVERHEAD + mr r4,r14 + ld r14,PACA_EXCRIT+EX_R14(r13) + ld r15,PACA_EXCRIT+EX_R15(r13) + bl .save_nvgprs + bl .DebugException + b .ret_from_except + +kernel_dbg_exc: + b . /* NYI */ + + +/* + * An interrupt came in while soft-disabled; clear EE in SRR1, + * clear paca->hard_enabled and return. + */ +masked_interrupt_book3e: + mtcr r10 + stb r11,PACAHARDIRQEN(r13) + mfspr r10,SPRN_SRR1 + rldicl r11,r10,48,1 /* clear MSR_EE */ + rotldi r10,r11,16 + mtspr SPRN_SRR1,r10 + ld r10,PACA_EXGEN+EX_R10(r13); /* restore registers */ + ld r11,PACA_EXGEN+EX_R11(r13); + mfspr r13,SPRN_SPRG_GEN_SCRATCH; + rfi + b . + +/* + * This is called from 0x300 and 0x400 handlers after the prologs with + * r14 and r15 containing the fault address and error code, with the + * original values stashed away in the PACA + */ +storage_fault_common: + std r14,_DAR(r1) + std r15,_DSISR(r1) + addi r3,r1,STACK_FRAME_OVERHEAD + mr r4,r14 + mr r5,r15 + ld r14,PACA_EXGEN+EX_R14(r13) + ld r15,PACA_EXGEN+EX_R15(r13) + INTS_RESTORE_HARD + bl .do_page_fault + cmpdi r3,0 + bne- 1f + b .ret_from_except_lite +1: bl .save_nvgprs + mr r5,r3 + addi r3,r1,STACK_FRAME_OVERHEAD + ld r4,_DAR(r1) + bl .bad_page_fault + b .ret_from_except + +/* + * Alignment exception doesn't fit entirely in the 0x100 bytes so it + * continues here. + */ +alignment_more: + std r14,_DAR(r1) + std r15,_DSISR(r1) + addi r3,r1,STACK_FRAME_OVERHEAD + ld r14,PACA_EXGEN+EX_R14(r13) + ld r15,PACA_EXGEN+EX_R15(r13) + bl .save_nvgprs + INTS_RESTORE_HARD + bl .alignment_exception + b .ret_from_except + +/* + * We branch here from entry_64.S for the last stage of the exception + * return code path. MSR:EE is expected to be off at that point + */ +_GLOBAL(exception_return_book3e) + b 1f + +/* This is the return from load_up_fpu fast path which could do with + * less GPR restores in fact, but for now we have a single return path + */ + .globl fast_exception_return +fast_exception_return: + wrteei 0 +1: mr r0,r13 + ld r10,_MSR(r1) + REST_4GPRS(2, r1) + andi. r6,r10,MSR_PR + REST_2GPRS(6, r1) + beq 1f + ACCOUNT_CPU_USER_EXIT(r10, r11) + ld r0,GPR13(r1) + +1: stdcx. r0,0,r1 /* to clear the reservation */ + + ld r8,_CCR(r1) + ld r9,_LINK(r1) + ld r10,_CTR(r1) + ld r11,_XER(r1) + mtcr r8 + mtlr r9 + mtctr r10 + mtxer r11 + REST_2GPRS(8, r1) + ld r10,GPR10(r1) + ld r11,GPR11(r1) + ld r12,GPR12(r1) + mtspr SPRN_SPRG_GEN_SCRATCH,r0 + + std r10,PACA_EXGEN+EX_R10(r13); + std r11,PACA_EXGEN+EX_R11(r13); + ld r10,_NIP(r1) + ld r11,_MSR(r1) + ld r0,GPR0(r1) + ld r1,GPR1(r1) + mtspr SPRN_SRR0,r10 + mtspr SPRN_SRR1,r11 + ld r10,PACA_EXGEN+EX_R10(r13) + ld r11,PACA_EXGEN+EX_R11(r13) + mfspr r13,SPRN_SPRG_GEN_SCRATCH + rfi + +/* + * Trampolines used when spotting a bad kernel stack pointer in + * the exception entry code. + * + * TODO: move some bits like SRR0 read to trampoline, pass PACA + * index around, etc... to handle crit & mcheck + */ +BAD_STACK_TRAMPOLINE(0x000) +BAD_STACK_TRAMPOLINE(0x100) +BAD_STACK_TRAMPOLINE(0x200) +BAD_STACK_TRAMPOLINE(0x300) +BAD_STACK_TRAMPOLINE(0x400) +BAD_STACK_TRAMPOLINE(0x500) +BAD_STACK_TRAMPOLINE(0x600) +BAD_STACK_TRAMPOLINE(0x700) +BAD_STACK_TRAMPOLINE(0x800) +BAD_STACK_TRAMPOLINE(0x900) +BAD_STACK_TRAMPOLINE(0x980) +BAD_STACK_TRAMPOLINE(0x9f0) +BAD_STACK_TRAMPOLINE(0xa00) +BAD_STACK_TRAMPOLINE(0xb00) +BAD_STACK_TRAMPOLINE(0xc00) +BAD_STACK_TRAMPOLINE(0xd00) +BAD_STACK_TRAMPOLINE(0xe00) +BAD_STACK_TRAMPOLINE(0xf00) +BAD_STACK_TRAMPOLINE(0xf20) + + .globl bad_stack_book3e +bad_stack_book3e: + /* XXX: Needs to make SPRN_SPRG_GEN depend on exception type */ + mfspr r10,SPRN_SRR0; /* read SRR0 before touching stack */ + ld r1,PACAEMERGSP(r13) + subi r1,r1,64+INT_FRAME_SIZE + std r10,_NIP(r1) + std r11,_MSR(r1) + ld r10,PACA_EXGEN+EX_R1(r13) /* FIXME for crit & mcheck */ + lwz r11,PACA_EXGEN+EX_CR(r13) /* FIXME for crit & mcheck */ + std r10,GPR1(r1) + std r11,_CCR(r1) + mfspr r10,SPRN_DEAR + mfspr r11,SPRN_ESR + std r10,_DAR(r1) + std r11,_DSISR(r1) + std r0,GPR0(r1); /* save r0 in stackframe */ \ + std r2,GPR2(r1); /* save r2 in stackframe */ \ + SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \ + SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \ + std r9,GPR9(r1); /* save r9 in stackframe */ \ + ld r3,PACA_EXGEN+EX_R10(r13);/* get back r10 */ \ + ld r4,PACA_EXGEN+EX_R11(r13);/* get back r11 */ \ + mfspr r5,SPRN_SPRG_GEN_SCRATCH;/* get back r13 XXX can be wrong */ \ + std r3,GPR10(r1); /* save r10 to stackframe */ \ + std r4,GPR11(r1); /* save r11 to stackframe */ \ + std r12,GPR12(r1); /* save r12 in stackframe */ \ + std r5,GPR13(r1); /* save it to stackframe */ \ + mflr r10 + mfctr r11 + mfxer r12 + std r10,_LINK(r1) + std r11,_CTR(r1) + std r12,_XER(r1) + SAVE_10GPRS(14,r1) + SAVE_8GPRS(24,r1) + lhz r12,PACA_TRAP_SAVE(r13) + std r12,_TRAP(r1) + addi r11,r1,INT_FRAME_SIZE + std r11,0(r1) + li r12,0 + std r12,0(r11) + ld r2,PACATOC(r13) +1: addi r3,r1,STACK_FRAME_OVERHEAD + bl .kernel_bad_stack + b 1b + +/* + * Setup the initial TLB for a core. This current implementation + * assume that whatever we are running off will not conflict with + * the new mapping at PAGE_OFFSET. + */ +_GLOBAL(initial_tlb_book3e) + + /* Look for the first TLB with IPROT set */ + mfspr r4,SPRN_TLB0CFG + andi. r3,r4,TLBnCFG_IPROT + lis r3,MAS0_TLBSEL(0)@h + bne found_iprot + + mfspr r4,SPRN_TLB1CFG + andi. r3,r4,TLBnCFG_IPROT + lis r3,MAS0_TLBSEL(1)@h + bne found_iprot + + mfspr r4,SPRN_TLB2CFG + andi. r3,r4,TLBnCFG_IPROT + lis r3,MAS0_TLBSEL(2)@h + bne found_iprot + + lis r3,MAS0_TLBSEL(3)@h + mfspr r4,SPRN_TLB3CFG + /* fall through */ + +found_iprot: + andi. r5,r4,TLBnCFG_HES + bne have_hes + + mflr r8 /* save LR */ +/* 1. Find the index of the entry we're executing in + * + * r3 = MAS0_TLBSEL (for the iprot array) + * r4 = SPRN_TLBnCFG + */ + bl invstr /* Find our address */ +invstr: mflr r6 /* Make it accessible */ + mfmsr r7 + rlwinm r5,r7,27,31,31 /* extract MSR[IS] */ + mfspr r7,SPRN_PID + slwi r7,r7,16 + or r7,r7,r5 + mtspr SPRN_MAS6,r7 + tlbsx 0,r6 /* search MSR[IS], SPID=PID */ + + mfspr r3,SPRN_MAS0 + rlwinm r5,r3,16,20,31 /* Extract MAS0(Entry) */ + + mfspr r7,SPRN_MAS1 /* Insure IPROT set */ + oris r7,r7,MAS1_IPROT@h + mtspr SPRN_MAS1,r7 + tlbwe + +/* 2. Invalidate all entries except the entry we're executing in + * + * r3 = MAS0 w/TLBSEL & ESEL for the entry we are running in + * r4 = SPRN_TLBnCFG + * r5 = ESEL of entry we are running in + */ + andi. r4,r4,TLBnCFG_N_ENTRY /* Extract # entries */ + li r6,0 /* Set Entry counter to 0 */ +1: mr r7,r3 /* Set MAS0(TLBSEL) */ + rlwimi r7,r6,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r6) */ + mtspr SPRN_MAS0,r7 + tlbre + mfspr r7,SPRN_MAS1 + rlwinm r7,r7,0,2,31 /* Clear MAS1 Valid and IPROT */ + cmpw r5,r6 + beq skpinv /* Dont update the current execution TLB */ + mtspr SPRN_MAS1,r7 + tlbwe + isync +skpinv: addi r6,r6,1 /* Increment */ + cmpw r6,r4 /* Are we done? */ + bne 1b /* If not, repeat */ + + /* Invalidate all TLBs */ + PPC_TLBILX_ALL(0,0) + sync + isync + +/* 3. Setup a temp mapping and jump to it + * + * r3 = MAS0 w/TLBSEL & ESEL for the entry we are running in + * r5 = ESEL of entry we are running in + */ + andi. r7,r5,0x1 /* Find an entry not used and is non-zero */ + addi r7,r7,0x1 + mr r4,r3 /* Set MAS0(TLBSEL) = 1 */ + mtspr SPRN_MAS0,r4 + tlbre + + rlwimi r4,r7,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r7) */ + mtspr SPRN_MAS0,r4 + + mfspr r7,SPRN_MAS1 + xori r6,r7,MAS1_TS /* Setup TMP mapping in the other Address space */ + mtspr SPRN_MAS1,r6 + + tlbwe + + mfmsr r6 + xori r6,r6,MSR_IS + mtspr SPRN_SRR1,r6 + bl 1f /* Find our address */ +1: mflr r6 + addi r6,r6,(2f - 1b) + mtspr SPRN_SRR0,r6 + rfi +2: + +/* 4. Clear out PIDs & Search info + * + * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in + * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping + * r5 = MAS3 + */ + li r6,0 + mtspr SPRN_MAS6,r6 + mtspr SPRN_PID,r6 + +/* 5. Invalidate mapping we started in + * + * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in + * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping + * r5 = MAS3 + */ + mtspr SPRN_MAS0,r3 + tlbre + mfspr r6,SPRN_MAS1 + rlwinm r6,r6,0,2,0 /* clear IPROT */ + mtspr SPRN_MAS1,r6 + tlbwe + + /* Invalidate TLB1 */ + PPC_TLBILX_ALL(0,0) + sync + isync + +/* The mapping only needs to be cache-coherent on SMP */ +#ifdef CONFIG_SMP +#define M_IF_SMP MAS2_M +#else +#define M_IF_SMP 0 +#endif + +/* 6. Setup KERNELBASE mapping in TLB[0] + * + * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in + * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping + * r5 = MAS3 + */ + rlwinm r3,r3,0,16,3 /* clear ESEL */ + mtspr SPRN_MAS0,r3 + lis r6,(MAS1_VALID|MAS1_IPROT)@h + ori r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_1GB))@l + mtspr SPRN_MAS1,r6 + + LOAD_REG_IMMEDIATE(r6, PAGE_OFFSET | M_IF_SMP) + mtspr SPRN_MAS2,r6 + + rlwinm r5,r5,0,0,25 + ori r5,r5,MAS3_SR | MAS3_SW | MAS3_SX + mtspr SPRN_MAS3,r5 + li r5,-1 + rlwinm r5,r5,0,0,25 + + tlbwe + +/* 7. Jump to KERNELBASE mapping + * + * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping + */ + /* Now we branch the new virtual address mapped by this entry */ + LOAD_REG_IMMEDIATE(r6,2f) + lis r7,MSR_KERNEL@h + ori r7,r7,MSR_KERNEL@l + mtspr SPRN_SRR0,r6 + mtspr SPRN_SRR1,r7 + rfi /* start execution out of TLB1[0] entry */ +2: + +/* 8. Clear out the temp mapping + * + * r4 = MAS0 w/TLBSEL & ESEL for the entry we are running in + */ + mtspr SPRN_MAS0,r4 + tlbre + mfspr r5,SPRN_MAS1 + rlwinm r5,r5,0,2,0 /* clear IPROT */ + mtspr SPRN_MAS1,r5 + tlbwe + + /* Invalidate TLB1 */ + PPC_TLBILX_ALL(0,0) + sync + isync + + /* We translate LR and return */ + tovirt(r8,r8) + mtlr r8 + blr + +have_hes: + /* Setup MAS 0,1,2,3 and 7 for tlbwe of a 1G entry that maps the + * kernel linear mapping. We also set MAS8 once for all here though + * that will have to be made dependent on whether we are running under + * a hypervisor I suppose. + */ + ori r3,r3,MAS0_HES | MAS0_WQ_ALLWAYS + mtspr SPRN_MAS0,r3 + lis r3,(MAS1_VALID | MAS1_IPROT)@h + ori r3,r3,BOOK3E_PAGESZ_1GB << MAS1_TSIZE_SHIFT + mtspr SPRN_MAS1,r3 + LOAD_REG_IMMEDIATE(r3, PAGE_OFFSET | MAS2_M) + mtspr SPRN_MAS2,r3 + li r3,MAS3_SR | MAS3_SW | MAS3_SX + mtspr SPRN_MAS7_MAS3,r3 + li r3,0 + mtspr SPRN_MAS8,r3 + + /* Write the TLB entry */ + tlbwe + + /* Now we branch the new virtual address mapped by this entry */ + LOAD_REG_IMMEDIATE(r3,1f) + mtctr r3 + bctr + +1: /* We are now running at PAGE_OFFSET, clean the TLB of everything + * else (XXX we should scan for bolted crap from the firmware too) + */ + PPC_TLBILX(0,0,0) + sync + isync + + /* We translate LR and return */ + mflr r3 + tovirt(r3,r3) + mtlr r3 + blr + +/* + * Main entry (boot CPU, thread 0) + * + * We enter here from head_64.S, possibly after the prom_init trampoline + * with r3 and r4 already saved to r31 and 30 respectively and in 64 bits + * mode. Anything else is as it was left by the bootloader + * + * Initial requirements of this port: + * + * - Kernel loaded at 0 physical + * - A good lump of memory mapped 0:0 by UTLB entry 0 + * - MSR:IS & MSR:DS set to 0 + * + * Note that some of the above requirements will be relaxed in the future + * as the kernel becomes smarter at dealing with different initial conditions + * but for now you have to be careful + */ +_GLOBAL(start_initialization_book3e) + mflr r28 + + /* First, we need to setup some initial TLBs to map the kernel + * text, data and bss at PAGE_OFFSET. We don't have a real mode + * and always use AS 0, so we just set it up to match our link + * address and never use 0 based addresses. + */ + bl .initial_tlb_book3e + + /* Init global core bits */ + bl .init_core_book3e + + /* Init per-thread bits */ + bl .init_thread_book3e + + /* Return to common init code */ + tovirt(r28,r28) + mtlr r28 + blr + + +/* + * Secondary core/processor entry + * + * This is entered for thread 0 of a secondary core, all other threads + * are expected to be stopped. It's similar to start_initialization_book3e + * except that it's generally entered from the holding loop in head_64.S + * after CPUs have been gathered by Open Firmware. + * + * We assume we are in 32 bits mode running with whatever TLB entry was + * set for us by the firmware or POR engine. + */ +_GLOBAL(book3e_secondary_core_init_tlb_set) + li r4,1 + b .generic_secondary_smp_init + +_GLOBAL(book3e_secondary_core_init) + mflr r28 + + /* Do we need to setup initial TLB entry ? */ + cmplwi r4,0 + bne 2f + + /* Setup TLB for this core */ + bl .initial_tlb_book3e + + /* We can return from the above running at a different + * address, so recalculate r2 (TOC) + */ + bl .relative_toc + + /* Init global core bits */ +2: bl .init_core_book3e + + /* Init per-thread bits */ +3: bl .init_thread_book3e + + /* Return to common init code at proper virtual address. + * + * Due to various previous assumptions, we know we entered this + * function at either the final PAGE_OFFSET mapping or using a + * 1:1 mapping at 0, so we don't bother doing a complicated check + * here, we just ensure the return address has the right top bits. + * + * Note that if we ever want to be smarter about where we can be + * started from, we have to be careful that by the time we reach + * the code below we may already be running at a different location + * than the one we were called from since initial_tlb_book3e can + * have moved us already. + */ + cmpdi cr0,r28,0 + blt 1f + lis r3,PAGE_OFFSET@highest + sldi r3,r3,32 + or r28,r28,r3 +1: mtlr r28 + blr + +_GLOBAL(book3e_secondary_thread_init) + mflr r28 + b 3b + +_STATIC(init_core_book3e) + /* Establish the interrupt vector base */ + LOAD_REG_IMMEDIATE(r3, interrupt_base_book3e) + mtspr SPRN_IVPR,r3 + sync + blr + +_STATIC(init_thread_book3e) + lis r3,(SPRN_EPCR_ICM | SPRN_EPCR_GICM)@h + mtspr SPRN_EPCR,r3 + + /* Make sure interrupts are off */ + wrteei 0 + + /* disable all timers and clear out status */ + li r3,0 + mtspr SPRN_TCR,r3 + mfspr r3,SPRN_TSR + mtspr SPRN_TSR,r3 + + blr + +_GLOBAL(__setup_base_ivors) + SET_IVOR(0, 0x020) /* Critical Input */ + SET_IVOR(1, 0x000) /* Machine Check */ + SET_IVOR(2, 0x060) /* Data Storage */ + SET_IVOR(3, 0x080) /* Instruction Storage */ + SET_IVOR(4, 0x0a0) /* External Input */ + SET_IVOR(5, 0x0c0) /* Alignment */ + SET_IVOR(6, 0x0e0) /* Program */ + SET_IVOR(7, 0x100) /* FP Unavailable */ + SET_IVOR(8, 0x120) /* System Call */ + SET_IVOR(9, 0x140) /* Auxiliary Processor Unavailable */ + SET_IVOR(10, 0x160) /* Decrementer */ + SET_IVOR(11, 0x180) /* Fixed Interval Timer */ + SET_IVOR(12, 0x1a0) /* Watchdog Timer */ + SET_IVOR(13, 0x1c0) /* Data TLB Error */ + SET_IVOR(14, 0x1e0) /* Instruction TLB Error */ + SET_IVOR(15, 0x040) /* Debug */ + + sync + + blr diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index eb898112e577..1808876edcc9 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -12,6 +12,8 @@ * */ +#include <asm/exception-64s.h> + /* * We layout physical memory as follows: * 0x0000 - 0x00ff : Secondary processor spin code @@ -22,18 +24,6 @@ * 0x8000 - : Early init and support code */ - -/* - * SPRG Usage - * - * Register Definition - * - * SPRG0 reserved for hypervisor - * SPRG1 temp - used to save gpr - * SPRG2 temp - used to save gpr - * SPRG3 virt addr of paca - */ - /* * This is the start of the interrupt handlers for pSeries * This code runs with relocation off. @@ -51,34 +41,44 @@ __start_interrupts: . = 0x200 _machine_check_pSeries: HMT_MEDIUM - mtspr SPRN_SPRG1,r13 /* save r13 */ + mtspr SPRN_SPRG_SCRATCH0,r13 /* save r13 */ EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common) . = 0x300 .globl data_access_pSeries data_access_pSeries: HMT_MEDIUM - mtspr SPRN_SPRG1,r13 + mtspr SPRN_SPRG_SCRATCH0,r13 BEGIN_FTR_SECTION - mtspr SPRN_SPRG2,r12 - mfspr r13,SPRN_DAR - mfspr r12,SPRN_DSISR - srdi r13,r13,60 - rlwimi r13,r12,16,0x20 - mfcr r12 - cmpwi r13,0x2c + mfspr r13,SPRN_SPRG_PACA + std r9,PACA_EXSLB+EX_R9(r13) + std r10,PACA_EXSLB+EX_R10(r13) + mfspr r10,SPRN_DAR + mfspr r9,SPRN_DSISR + srdi r10,r10,60 + rlwimi r10,r9,16,0x20 + mfcr r9 + cmpwi r10,0x2c beq do_stab_bolted_pSeries - mtcrf 0x80,r12 - mfspr r12,SPRN_SPRG2 -END_FTR_SECTION_IFCLR(CPU_FTR_SLB) + ld r10,PACA_EXSLB+EX_R10(r13) + std r11,PACA_EXGEN+EX_R11(r13) + ld r11,PACA_EXSLB+EX_R9(r13) + std r12,PACA_EXGEN+EX_R12(r13) + mfspr r12,SPRN_SPRG_SCRATCH0 + std r10,PACA_EXGEN+EX_R10(r13) + std r11,PACA_EXGEN+EX_R9(r13) + std r12,PACA_EXGEN+EX_R13(r13) + EXCEPTION_PROLOG_PSERIES_1(data_access_common) +FTR_SECTION_ELSE EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common) +ALT_FTR_SECTION_END_IFCLR(CPU_FTR_SLB) . = 0x380 .globl data_access_slb_pSeries data_access_slb_pSeries: HMT_MEDIUM - mtspr SPRN_SPRG1,r13 - mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ + mtspr SPRN_SPRG_SCRATCH0,r13 + mfspr r13,SPRN_SPRG_PACA /* get paca address into r13 */ std r3,PACA_EXSLB+EX_R3(r13) mfspr r3,SPRN_DAR std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */ @@ -91,7 +91,7 @@ data_access_slb_pSeries: std r10,PACA_EXSLB+EX_R10(r13) std r11,PACA_EXSLB+EX_R11(r13) std r12,PACA_EXSLB+EX_R12(r13) - mfspr r10,SPRN_SPRG1 + mfspr r10,SPRN_SPRG_SCRATCH0 std r10,PACA_EXSLB+EX_R13(r13) mfspr r12,SPRN_SRR1 /* and SRR1 */ #ifndef CONFIG_RELOCATABLE @@ -115,8 +115,8 @@ data_access_slb_pSeries: .globl instruction_access_slb_pSeries instruction_access_slb_pSeries: HMT_MEDIUM - mtspr SPRN_SPRG1,r13 - mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ + mtspr SPRN_SPRG_SCRATCH0,r13 + mfspr r13,SPRN_SPRG_PACA /* get paca address into r13 */ std r3,PACA_EXSLB+EX_R3(r13) mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */ std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */ @@ -129,7 +129,7 @@ instruction_access_slb_pSeries: std r10,PACA_EXSLB+EX_R10(r13) std r11,PACA_EXSLB+EX_R11(r13) std r12,PACA_EXSLB+EX_R12(r13) - mfspr r10,SPRN_SPRG1 + mfspr r10,SPRN_SPRG_SCRATCH0 std r10,PACA_EXSLB+EX_R13(r13) mfspr r12,SPRN_SRR1 /* and SRR1 */ #ifndef CONFIG_RELOCATABLE @@ -159,7 +159,7 @@ BEGIN_FTR_SECTION beq- 1f END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE) mr r9,r13 - mfspr r13,SPRN_SPRG3 + mfspr r13,SPRN_SPRG_PACA mfspr r11,SPRN_SRR0 ld r12,PACAKBASE(r13) ld r10,PACAKMSR(r13) @@ -228,15 +228,17 @@ masked_interrupt: rotldi r10,r10,16 mtspr SPRN_SRR1,r10 ld r10,PACA_EXGEN+EX_R10(r13) - mfspr r13,SPRN_SPRG1 + mfspr r13,SPRN_SPRG_SCRATCH0 rfid b . .align 7 do_stab_bolted_pSeries: - mtcrf 0x80,r12 - mfspr r12,SPRN_SPRG2 - EXCEPTION_PROLOG_PSERIES(PACA_EXSLB, .do_stab_bolted) + std r11,PACA_EXSLB+EX_R11(r13) + std r12,PACA_EXSLB+EX_R12(r13) + mfspr r10,SPRN_SPRG_SCRATCH0 + std r10,PACA_EXSLB+EX_R13(r13) + EXCEPTION_PROLOG_PSERIES_1(.do_stab_bolted) #ifdef CONFIG_PPC_PSERIES /* @@ -246,14 +248,14 @@ do_stab_bolted_pSeries: .align 7 system_reset_fwnmi: HMT_MEDIUM - mtspr SPRN_SPRG1,r13 /* save r13 */ + mtspr SPRN_SPRG_SCRATCH0,r13 /* save r13 */ EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common) .globl machine_check_fwnmi .align 7 machine_check_fwnmi: HMT_MEDIUM - mtspr SPRN_SPRG1,r13 /* save r13 */ + mtspr SPRN_SPRG_SCRATCH0,r13 /* save r13 */ EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common) #endif /* CONFIG_PPC_PSERIES */ @@ -268,7 +270,7 @@ slb_miss_user_pseries: std r10,PACA_EXGEN+EX_R10(r13) std r11,PACA_EXGEN+EX_R11(r13) std r12,PACA_EXGEN+EX_R12(r13) - mfspr r10,SPRG1 + mfspr r10,SPRG_SCRATCH0 ld r11,PACA_EXSLB+EX_R9(r13) ld r12,PACA_EXSLB+EX_R3(r13) std r10,PACA_EXGEN+EX_R13(r13) @@ -729,6 +731,11 @@ BEGIN_FTR_SECTION bne- do_ste_alloc /* If so handle it */ END_FTR_SECTION_IFCLR(CPU_FTR_SLB) + clrrdi r11,r1,THREAD_SHIFT + lwz r0,TI_PREEMPT(r11) /* If we're in an "NMI" */ + andis. r0,r0,NMI_MASK@h /* (i.e. an irq when soft-disabled) */ + bne 77f /* then don't call hash_page now */ + /* * On iSeries, we soft-disable interrupts here, then * hard-enable interrupts so that the hash_page code can spin on @@ -833,6 +840,20 @@ handle_page_fault: bl .low_hash_fault b .ret_from_except +/* + * We come here as a result of a DSI at a point where we don't want + * to call hash_page, such as when we are accessing memory (possibly + * user memory) inside a PMU interrupt that occurred while interrupts + * were soft-disabled. We want to invoke the exception handler for + * the access, or panic if there isn't a handler. + */ +77: bl .save_nvgprs + mr r4,r3 + addi r3,r1,STACK_FRAME_OVERHEAD + li r5,SIGSEGV + bl .bad_page_fault + b .ret_from_except + /* here we have a segment miss */ do_ste_alloc: bl .ste_allocate /* try to insert stab entry */ diff --git a/arch/powerpc/kernel/fpu.S b/arch/powerpc/kernel/fpu.S index 2436df33c6f4..fc8f5b14019c 100644 --- a/arch/powerpc/kernel/fpu.S +++ b/arch/powerpc/kernel/fpu.S @@ -91,7 +91,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX) #endif /* CONFIG_SMP */ /* enable use of FP after return */ #ifdef CONFIG_PPC32 - mfspr r5,SPRN_SPRG3 /* current task's THREAD (phys) */ + mfspr r5,SPRN_SPRG_THREAD /* current task's THREAD (phys) */ lwz r4,THREAD_FPEXC_MODE(r5) ori r9,r9,MSR_FP /* enable FP for current */ or r9,r9,r4 diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S index fc2132942754..829c3fe7c5a2 100644 --- a/arch/powerpc/kernel/head_32.S +++ b/arch/powerpc/kernel/head_32.S @@ -244,8 +244,8 @@ __secondary_hold_acknowledge: * task's thread_struct. */ #define EXCEPTION_PROLOG \ - mtspr SPRN_SPRG0,r10; \ - mtspr SPRN_SPRG1,r11; \ + mtspr SPRN_SPRG_SCRATCH0,r10; \ + mtspr SPRN_SPRG_SCRATCH1,r11; \ mfcr r10; \ EXCEPTION_PROLOG_1; \ EXCEPTION_PROLOG_2 @@ -255,7 +255,7 @@ __secondary_hold_acknowledge: andi. r11,r11,MSR_PR; \ tophys(r11,r1); /* use tophys(r1) if kernel */ \ beq 1f; \ - mfspr r11,SPRN_SPRG3; \ + mfspr r11,SPRN_SPRG_THREAD; \ lwz r11,THREAD_INFO-THREAD(r11); \ addi r11,r11,THREAD_SIZE; \ tophys(r11,r11); \ @@ -267,9 +267,9 @@ __secondary_hold_acknowledge: stw r10,_CCR(r11); /* save registers */ \ stw r12,GPR12(r11); \ stw r9,GPR9(r11); \ - mfspr r10,SPRN_SPRG0; \ + mfspr r10,SPRN_SPRG_SCRATCH0; \ stw r10,GPR10(r11); \ - mfspr r12,SPRN_SPRG1; \ + mfspr r12,SPRN_SPRG_SCRATCH1; \ stw r12,GPR11(r11); \ mflr r10; \ stw r10,_LINK(r11); \ @@ -355,11 +355,11 @@ i##n: \ * -- paulus. */ . = 0x200 - mtspr SPRN_SPRG0,r10 - mtspr SPRN_SPRG1,r11 + mtspr SPRN_SPRG_SCRATCH0,r10 + mtspr SPRN_SPRG_SCRATCH1,r11 mfcr r10 #ifdef CONFIG_PPC_CHRP - mfspr r11,SPRN_SPRG2 + mfspr r11,SPRN_SPRG_RTAS cmpwi 0,r11,0 bne 7f #endif /* CONFIG_PPC_CHRP */ @@ -367,7 +367,7 @@ i##n: \ 7: EXCEPTION_PROLOG_2 addi r3,r1,STACK_FRAME_OVERHEAD #ifdef CONFIG_PPC_CHRP - mfspr r4,SPRN_SPRG2 + mfspr r4,SPRN_SPRG_RTAS cmpwi cr1,r4,0 bne cr1,1f #endif @@ -485,7 +485,7 @@ InstructionTLBMiss: mfspr r3,SPRN_IMISS lis r1,PAGE_OFFSET@h /* check if kernel address */ cmplw 0,r1,r3 - mfspr r2,SPRN_SPRG3 + mfspr r2,SPRN_SPRG_THREAD li r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */ lwz r2,PGDIR(r2) bge- 112f @@ -559,7 +559,7 @@ DataLoadTLBMiss: mfspr r3,SPRN_DMISS lis r1,PAGE_OFFSET@h /* check if kernel address */ cmplw 0,r1,r3 - mfspr r2,SPRN_SPRG3 + mfspr r2,SPRN_SPRG_THREAD li r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */ lwz r2,PGDIR(r2) bge- 112f @@ -598,12 +598,12 @@ END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT) mtcrf 0x80,r2 BEGIN_MMU_FTR_SECTION li r0,1 - mfspr r1,SPRN_SPRG4 + mfspr r1,SPRN_SPRG_603_LRU rlwinm r2,r3,20,27,31 /* Get Address bits 15:19 */ slw r0,r0,r2 xor r1,r0,r1 srw r0,r1,r2 - mtspr SPRN_SPRG4,r1 + mtspr SPRN_SPRG_603_LRU,r1 mfspr r2,SPRN_SRR1 rlwimi r2,r0,31-14,14,14 mtspr SPRN_SRR1,r2 @@ -643,7 +643,7 @@ DataStoreTLBMiss: mfspr r3,SPRN_DMISS lis r1,PAGE_OFFSET@h /* check if kernel address */ cmplw 0,r1,r3 - mfspr r2,SPRN_SPRG3 + mfspr r2,SPRN_SPRG_THREAD li r1,_PAGE_RW|_PAGE_USER|_PAGE_PRESENT /* access flags */ lwz r2,PGDIR(r2) bge- 112f @@ -678,12 +678,12 @@ END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT) mtcrf 0x80,r2 BEGIN_MMU_FTR_SECTION li r0,1 - mfspr r1,SPRN_SPRG4 + mfspr r1,SPRN_SPRG_603_LRU rlwinm r2,r3,20,27,31 /* Get Address bits 15:19 */ slw r0,r0,r2 xor r1,r0,r1 srw r0,r1,r2 - mtspr SPRN_SPRG4,r1 + mtspr SPRN_SPRG_603_LRU,r1 mfspr r2,SPRN_SRR1 rlwimi r2,r0,31-14,14,14 mtspr SPRN_SRR1,r2 @@ -864,9 +864,9 @@ __secondary_start: tophys(r4,r2) addi r4,r4,THREAD /* phys address of our thread_struct */ CLR_TOP32(r4) - mtspr SPRN_SPRG3,r4 + mtspr SPRN_SPRG_THREAD,r4 li r3,0 - mtspr SPRN_SPRG2,r3 /* 0 => not in RTAS */ + mtspr SPRN_SPRG_RTAS,r3 /* 0 => not in RTAS */ /* enable MMU and jump to start_secondary */ li r4,MSR_KERNEL @@ -947,9 +947,9 @@ start_here: tophys(r4,r2) addi r4,r4,THREAD /* init task's THREAD */ CLR_TOP32(r4) - mtspr SPRN_SPRG3,r4 + mtspr SPRN_SPRG_THREAD,r4 li r3,0 - mtspr SPRN_SPRG2,r3 /* 0 => not in RTAS */ + mtspr SPRN_SPRG_RTAS,r3 /* 0 => not in RTAS */ /* stack */ lis r1,init_thread_union@ha diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S index 0c96911d4299..a90625f9b485 100644 --- a/arch/powerpc/kernel/head_40x.S +++ b/arch/powerpc/kernel/head_40x.S @@ -103,21 +103,21 @@ _ENTRY(saved_ksp_limit) /* * Exception vector entry code. This code runs with address translation - * turned off (i.e. using physical addresses). We assume SPRG3 has the - * physical address of the current task thread_struct. + * turned off (i.e. using physical addresses). We assume SPRG_THREAD has + * the physical address of the current task thread_struct. * Note that we have to have decremented r1 before we write to any fields * of the exception frame, since a critical interrupt could occur at any * time, and it will write to the area immediately below the current r1. */ #define NORMAL_EXCEPTION_PROLOG \ - mtspr SPRN_SPRG0,r10; /* save two registers to work with */\ - mtspr SPRN_SPRG1,r11; \ - mtspr SPRN_SPRG2,r1; \ + mtspr SPRN_SPRG_SCRATCH0,r10; /* save two registers to work with */\ + mtspr SPRN_SPRG_SCRATCH1,r11; \ + mtspr SPRN_SPRG_SCRATCH2,r1; \ mfcr r10; /* save CR in r10 for now */\ mfspr r11,SPRN_SRR1; /* check whether user or kernel */\ andi. r11,r11,MSR_PR; \ beq 1f; \ - mfspr r1,SPRN_SPRG3; /* if from user, start at top of */\ + mfspr r1,SPRN_SPRG_THREAD; /* if from user, start at top of */\ lwz r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack */\ addi r1,r1,THREAD_SIZE; \ 1: subi r1,r1,INT_FRAME_SIZE; /* Allocate an exception frame */\ @@ -125,13 +125,13 @@ _ENTRY(saved_ksp_limit) stw r10,_CCR(r11); /* save various registers */\ stw r12,GPR12(r11); \ stw r9,GPR9(r11); \ - mfspr r10,SPRN_SPRG0; \ + mfspr r10,SPRN_SPRG_SCRATCH0; \ stw r10,GPR10(r11); \ - mfspr r12,SPRN_SPRG1; \ + mfspr r12,SPRN_SPRG_SCRATCH1; \ stw r12,GPR11(r11); \ mflr r10; \ stw r10,_LINK(r11); \ - mfspr r10,SPRN_SPRG2; \ + mfspr r10,SPRN_SPRG_SCRATCH2; \ mfspr r12,SPRN_SRR0; \ stw r10,GPR1(r11); \ mfspr r9,SPRN_SRR1; \ @@ -160,7 +160,7 @@ _ENTRY(saved_ksp_limit) lwz r11,critirq_ctx@l(r11); \ beq 1f; \ /* COMING FROM USER MODE */ \ - mfspr r11,SPRN_SPRG3; /* if from user, start at top of */\ + mfspr r11,SPRN_SPRG_THREAD; /* if from user, start at top of */\ lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\ 1: addi r11,r11,THREAD_SIZE-INT_FRAME_SIZE; /* Alloc an excpt frm */\ tophys(r11,r11); \ @@ -265,8 +265,8 @@ label: * and exit. Otherwise, we call heavywight functions to do the work. */ START_EXCEPTION(0x0300, DataStorage) - mtspr SPRN_SPRG0, r10 /* Save some working registers */ - mtspr SPRN_SPRG1, r11 + mtspr SPRN_SPRG_SCRATCH0, r10 /* Save some working registers */ + mtspr SPRN_SPRG_SCRATCH1, r11 #ifdef CONFIG_403GCX stw r12, 0(r0) stw r9, 4(r0) @@ -275,12 +275,12 @@ label: stw r11, 8(r0) stw r12, 12(r0) #else - mtspr SPRN_SPRG4, r12 - mtspr SPRN_SPRG5, r9 + mtspr SPRN_SPRG_SCRATCH3, r12 + mtspr SPRN_SPRG_SCRATCH4, r9 mfcr r11 mfspr r12, SPRN_PID - mtspr SPRN_SPRG7, r11 - mtspr SPRN_SPRG6, r12 + mtspr SPRN_SPRG_SCRATCH6, r11 + mtspr SPRN_SPRG_SCRATCH5, r12 #endif /* First, check if it was a zone fault (which means a user @@ -308,7 +308,7 @@ label: /* Get the PGD for the current thread. */ 3: - mfspr r11,SPRN_SPRG3 + mfspr r11,SPRN_SPRG_THREAD lwz r11,PGDIR(r11) 4: tophys(r11, r11) @@ -355,15 +355,15 @@ label: lwz r9, 4(r0) lwz r12, 0(r0) #else - mfspr r12, SPRN_SPRG6 - mfspr r11, SPRN_SPRG7 + mfspr r12, SPRN_SPRG_SCRATCH5 + mfspr r11, SPRN_SPRG_SCRATCH6 mtspr SPRN_PID, r12 mtcr r11 - mfspr r9, SPRN_SPRG5 - mfspr r12, SPRN_SPRG4 + mfspr r9, SPRN_SPRG_SCRATCH4 + mfspr r12, SPRN_SPRG_SCRATCH3 #endif - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 + mfspr r11, SPRN_SPRG_SCRATCH1 + mfspr r10, SPRN_SPRG_SCRATCH0 PPC405_ERR77_SYNC rfi /* Should sync shadow TLBs */ b . /* prevent prefetch past rfi */ @@ -380,15 +380,15 @@ label: lwz r9, 4(r0) lwz r12, 0(r0) #else - mfspr r12, SPRN_SPRG6 - mfspr r11, SPRN_SPRG7 + mfspr r12, SPRN_SPRG_SCRATCH5 + mfspr r11, SPRN_SPRG_SCRATCH6 mtspr SPRN_PID, r12 mtcr r11 - mfspr r9, SPRN_SPRG5 - mfspr r12, SPRN_SPRG4 + mfspr r9, SPRN_SPRG_SCRATCH4 + mfspr r12, SPRN_SPRG_SCRATCH3 #endif - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 + mfspr r11, SPRN_SPRG_SCRATCH1 + mfspr r10, SPRN_SPRG_SCRATCH0 b DataAccess /* @@ -466,8 +466,8 @@ label: * load TLB entries from the page table if they exist. */ START_EXCEPTION(0x1100, DTLBMiss) - mtspr SPRN_SPRG0, r10 /* Save some working registers */ - mtspr SPRN_SPRG1, r11 + mtspr SPRN_SPRG_SCRATCH0, r10 /* Save some working registers */ + mtspr SPRN_SPRG_SCRATCH1, r11 #ifdef CONFIG_403GCX stw r12, 0(r0) stw r9, 4(r0) @@ -476,12 +476,12 @@ label: stw r11, 8(r0) stw r12, 12(r0) #else - mtspr SPRN_SPRG4, r12 - mtspr SPRN_SPRG5, r9 + mtspr SPRN_SPRG_SCRATCH3, r12 + mtspr SPRN_SPRG_SCRATCH4, r9 mfcr r11 mfspr r12, SPRN_PID - mtspr SPRN_SPRG7, r11 - mtspr SPRN_SPRG6, r12 + mtspr SPRN_SPRG_SCRATCH6, r11 + mtspr SPRN_SPRG_SCRATCH5, r12 #endif mfspr r10, SPRN_DEAR /* Get faulting address */ @@ -500,7 +500,7 @@ label: /* Get the PGD for the current thread. */ 3: - mfspr r11,SPRN_SPRG3 + mfspr r11,SPRN_SPRG_THREAD lwz r11,PGDIR(r11) 4: tophys(r11, r11) @@ -550,15 +550,15 @@ label: lwz r9, 4(r0) lwz r12, 0(r0) #else - mfspr r12, SPRN_SPRG6 - mfspr r11, SPRN_SPRG7 + mfspr r12, SPRN_SPRG_SCRATCH5 + mfspr r11, SPRN_SPRG_SCRATCH6 mtspr SPRN_PID, r12 mtcr r11 - mfspr r9, SPRN_SPRG5 - mfspr r12, SPRN_SPRG4 + mfspr r9, SPRN_SPRG_SCRATCH4 + mfspr r12, SPRN_SPRG_SCRATCH3 #endif - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 + mfspr r11, SPRN_SPRG_SCRATCH1 + mfspr r10, SPRN_SPRG_SCRATCH0 b DataAccess /* 0x1200 - Instruction TLB Miss Exception @@ -566,8 +566,8 @@ label: * registers and bailout to a different point. */ START_EXCEPTION(0x1200, ITLBMiss) - mtspr SPRN_SPRG0, r10 /* Save some working registers */ - mtspr SPRN_SPRG1, r11 + mtspr SPRN_SPRG_SCRATCH0, r10 /* Save some working registers */ + mtspr SPRN_SPRG_SCRATCH1, r11 #ifdef CONFIG_403GCX stw r12, 0(r0) stw r9, 4(r0) @@ -576,12 +576,12 @@ label: stw r11, 8(r0) stw r12, 12(r0) #else - mtspr SPRN_SPRG4, r12 - mtspr SPRN_SPRG5, r9 + mtspr SPRN_SPRG_SCRATCH3, r12 + mtspr SPRN_SPRG_SCRATCH4, r9 mfcr r11 mfspr r12, SPRN_PID - mtspr SPRN_SPRG7, r11 - mtspr SPRN_SPRG6, r12 + mtspr SPRN_SPRG_SCRATCH6, r11 + mtspr SPRN_SPRG_SCRATCH5, r12 #endif mfspr r10, SPRN_SRR0 /* Get faulting address */ @@ -600,7 +600,7 @@ label: /* Get the PGD for the current thread. */ 3: - mfspr r11,SPRN_SPRG3 + mfspr r11,SPRN_SPRG_THREAD lwz r11,PGDIR(r11) 4: tophys(r11, r11) @@ -650,15 +650,15 @@ label: lwz r9, 4(r0) lwz r12, 0(r0) #else - mfspr r12, SPRN_SPRG6 - mfspr r11, SPRN_SPRG7 + mfspr r12, SPRN_SPRG_SCRATCH5 + mfspr r11, SPRN_SPRG_SCRATCH6 mtspr SPRN_PID, r12 mtcr r11 - mfspr r9, SPRN_SPRG5 - mfspr r12, SPRN_SPRG4 + mfspr r9, SPRN_SPRG_SCRATCH4 + mfspr r12, SPRN_SPRG_SCRATCH3 #endif - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 + mfspr r11, SPRN_SPRG_SCRATCH1 + mfspr r10, SPRN_SPRG_SCRATCH0 b InstructionAccess EXCEPTION(0x1300, Trap_13, unknown_exception, EXC_XFER_EE) @@ -803,15 +803,15 @@ finish_tlb_load: lwz r9, 4(r0) lwz r12, 0(r0) #else - mfspr r12, SPRN_SPRG6 - mfspr r11, SPRN_SPRG7 + mfspr r12, SPRN_SPRG_SCRATCH5 + mfspr r11, SPRN_SPRG_SCRATCH6 mtspr SPRN_PID, r12 mtcr r11 - mfspr r9, SPRN_SPRG5 - mfspr r12, SPRN_SPRG4 + mfspr r9, SPRN_SPRG_SCRATCH4 + mfspr r12, SPRN_SPRG_SCRATCH3 #endif - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 + mfspr r11, SPRN_SPRG_SCRATCH1 + mfspr r10, SPRN_SPRG_SCRATCH0 PPC405_ERR77_SYNC rfi /* Should sync shadow TLBs */ b . /* prevent prefetch past rfi */ @@ -835,7 +835,7 @@ start_here: /* ptr to phys current thread */ tophys(r4,r2) addi r4,r4,THREAD /* init task's THREAD */ - mtspr SPRN_SPRG3,r4 + mtspr SPRN_SPRG_THREAD,r4 /* stack */ lis r1,init_thread_union@ha diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S index 18d8a1677c4d..711368b993f2 100644 --- a/arch/powerpc/kernel/head_44x.S +++ b/arch/powerpc/kernel/head_44x.S @@ -239,7 +239,7 @@ skpinv: addi r4,r4,1 /* Increment */ /* ptr to current thread */ addi r4,r2,THREAD /* init task's THREAD */ - mtspr SPRN_SPRG3,r4 + mtspr SPRN_SPRG_THREAD,r4 /* stack */ lis r1,init_thread_union@h @@ -350,12 +350,12 @@ interrupt_base: /* Data TLB Error Interrupt */ START_EXCEPTION(DataTLBError) - mtspr SPRN_SPRG0, r10 /* Save some working registers */ - mtspr SPRN_SPRG1, r11 - mtspr SPRN_SPRG4W, r12 - mtspr SPRN_SPRG5W, r13 + mtspr SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */ + mtspr SPRN_SPRG_WSCRATCH1, r11 + mtspr SPRN_SPRG_WSCRATCH2, r12 + mtspr SPRN_SPRG_WSCRATCH3, r13 mfcr r11 - mtspr SPRN_SPRG7W, r11 + mtspr SPRN_SPRG_WSCRATCH4, r11 mfspr r10, SPRN_DEAR /* Get faulting address */ /* If we are faulting a kernel address, we have to use the @@ -374,7 +374,7 @@ interrupt_base: /* Get the PGD for the current thread */ 3: - mfspr r11,SPRN_SPRG3 + mfspr r11,SPRN_SPRG_THREAD lwz r11,PGDIR(r11) /* Load PID into MMUCR TID */ @@ -446,12 +446,12 @@ tlb_44x_patch_hwater_D: /* The bailout. Restore registers to pre-exception conditions * and call the heavyweights to help us out. */ - mfspr r11, SPRN_SPRG7R + mfspr r11, SPRN_SPRG_RSCRATCH4 mtcr r11 - mfspr r13, SPRN_SPRG5R - mfspr r12, SPRN_SPRG4R - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 + mfspr r13, SPRN_SPRG_RSCRATCH3 + mfspr r12, SPRN_SPRG_RSCRATCH2 + mfspr r11, SPRN_SPRG_RSCRATCH1 + mfspr r10, SPRN_SPRG_RSCRATCH0 b DataStorage /* Instruction TLB Error Interrupt */ @@ -461,12 +461,12 @@ tlb_44x_patch_hwater_D: * to a different point. */ START_EXCEPTION(InstructionTLBError) - mtspr SPRN_SPRG0, r10 /* Save some working registers */ - mtspr SPRN_SPRG1, r11 - mtspr SPRN_SPRG4W, r12 - mtspr SPRN_SPRG5W, r13 + mtspr SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */ + mtspr SPRN_SPRG_WSCRATCH1, r11 + mtspr SPRN_SPRG_WSCRATCH2, r12 + mtspr SPRN_SPRG_WSCRATCH3, r13 mfcr r11 - mtspr SPRN_SPRG7W, r11 + mtspr SPRN_SPRG_WSCRATCH4, r11 mfspr r10, SPRN_SRR0 /* Get faulting address */ /* If we are faulting a kernel address, we have to use the @@ -485,7 +485,7 @@ tlb_44x_patch_hwater_D: /* Get the PGD for the current thread */ 3: - mfspr r11,SPRN_SPRG3 + mfspr r11,SPRN_SPRG_THREAD lwz r11,PGDIR(r11) /* Load PID into MMUCR TID */ @@ -497,7 +497,7 @@ tlb_44x_patch_hwater_D: mtspr SPRN_MMUCR,r12 /* Make up the required permissions */ - li r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_HWEXEC + li r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC /* Compute pgdir/pmd offset */ rlwinm r12, r10, PPC44x_PGD_OFF_SHIFT, PPC44x_PGD_OFF_MASK_BIT, 29 @@ -542,12 +542,12 @@ tlb_44x_patch_hwater_I: /* The bailout. Restore registers to pre-exception conditions * and call the heavyweights to help us out. */ - mfspr r11, SPRN_SPRG7R + mfspr r11, SPRN_SPRG_RSCRATCH4 mtcr r11 - mfspr r13, SPRN_SPRG5R - mfspr r12, SPRN_SPRG4R - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 + mfspr r13, SPRN_SPRG_RSCRATCH3 + mfspr r12, SPRN_SPRG_RSCRATCH2 + mfspr r11, SPRN_SPRG_RSCRATCH1 + mfspr r10, SPRN_SPRG_RSCRATCH0 b InstructionStorage /* Debug Interrupt */ @@ -593,12 +593,12 @@ finish_tlb_load: /* Done...restore registers and get out of here. */ - mfspr r11, SPRN_SPRG7R + mfspr r11, SPRN_SPRG_RSCRATCH4 mtcr r11 - mfspr r13, SPRN_SPRG5R - mfspr r12, SPRN_SPRG4R - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 + mfspr r13, SPRN_SPRG_RSCRATCH3 + mfspr r12, SPRN_SPRG_RSCRATCH2 + mfspr r11, SPRN_SPRG_RSCRATCH1 + mfspr r10, SPRN_SPRG_RSCRATCH0 rfi /* Force context change */ /* diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 012505ebd9f9..c38afdb45d7b 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -36,7 +36,6 @@ #include <asm/thread_info.h> #include <asm/firmware.h> #include <asm/page_64.h> -#include <asm/exception.h> #include <asm/irqflags.h> /* The physical memory is layed out such that the secondary processor @@ -122,10 +121,11 @@ __run_at_load: */ .globl __secondary_hold __secondary_hold: +#ifndef CONFIG_PPC_BOOK3E mfmsr r24 ori r24,r24,MSR_RI mtmsrd r24 /* RI on */ - +#endif /* Grab our physical cpu number */ mr r24,r3 @@ -144,6 +144,7 @@ __secondary_hold: ld r4,0(r4) /* deref function descriptor */ mtctr r4 mr r3,r24 + li r4,0 bctr #else BUG_OPCODE @@ -164,21 +165,49 @@ exception_marker: #include "exceptions-64s.S" #endif +_GLOBAL(generic_secondary_thread_init) + mr r24,r3 + + /* turn on 64-bit mode */ + bl .enable_64b_mode + + /* get a valid TOC pointer, wherever we're mapped at */ + bl .relative_toc + +#ifdef CONFIG_PPC_BOOK3E + /* Book3E initialization */ + mr r3,r24 + bl .book3e_secondary_thread_init +#endif + b generic_secondary_common_init /* * On pSeries and most other platforms, secondary processors spin * in the following code. * At entry, r3 = this processor's number (physical cpu id) + * + * On Book3E, r4 = 1 to indicate that the initial TLB entry for + * this core already exists (setup via some other mechanism such + * as SCOM before entry). */ _GLOBAL(generic_secondary_smp_init) mr r24,r3 - + mr r25,r4 + /* turn on 64-bit mode */ bl .enable_64b_mode - /* get the TOC pointer (real address) */ + /* get a valid TOC pointer, wherever we're mapped at */ bl .relative_toc +#ifdef CONFIG_PPC_BOOK3E + /* Book3E initialization */ + mr r3,r24 + mr r4,r25 + bl .book3e_secondary_core_init +#endif + +generic_secondary_common_init: /* Set up a paca value for this processor. Since we have the * physical cpu id in r24, we need to search the pacas to find * which logical id maps to our physical one. @@ -196,7 +225,12 @@ _GLOBAL(generic_secondary_smp_init) mr r3,r24 /* not found, copy phys to r3 */ b .kexec_wait /* next kernel might do better */ -2: mtspr SPRN_SPRG3,r13 /* Save vaddr of paca in SPRG3 */ +2: mtspr SPRN_SPRG_PACA,r13 /* Save vaddr of paca in an SPRG */ +#ifdef CONFIG_PPC_BOOK3E + addi r12,r13,PACA_EXTLB /* and TLB exc frame in another */ + mtspr SPRN_SPRG_TLB_EXFRAME,r12 +#endif + /* From now on, r24 is expected to be logical cpuid */ mr r24,r5 3: HMT_LOW @@ -232,6 +266,7 @@ _GLOBAL(generic_secondary_smp_init) * Turn the MMU off. * Assumes we're mapped EA == RA if the MMU is on. */ +#ifdef CONFIG_PPC_BOOK3S _STATIC(__mmu_off) mfmsr r3 andi. r0,r3,MSR_IR|MSR_DR @@ -243,6 +278,7 @@ _STATIC(__mmu_off) sync rfid b . /* prevent speculative execution */ +#endif /* @@ -280,6 +316,10 @@ _GLOBAL(__start_initialization_multiplatform) mr r31,r3 mr r30,r4 +#ifdef CONFIG_PPC_BOOK3E + bl .start_initialization_book3e + b .__after_prom_start +#else /* Setup some critical 970 SPRs before switching MMU off */ mfspr r0,SPRN_PVR srwi r0,r0,16 @@ -297,6 +337,7 @@ _GLOBAL(__start_initialization_multiplatform) /* Switch off MMU if not already off */ bl .__mmu_off b .__after_prom_start +#endif /* CONFIG_PPC_BOOK3E */ _INIT_STATIC(__boot_from_prom) #ifdef CONFIG_PPC_OF_BOOT_TRAMPOLINE @@ -359,10 +400,16 @@ _STATIC(__after_prom_start) * Note: This process overwrites the OF exception vectors. */ li r3,0 /* target addr */ +#ifdef CONFIG_PPC_BOOK3E + tovirt(r3,r3) /* on booke, we already run at PAGE_OFFSET */ +#endif mr. r4,r26 /* In some cases the loader may */ beq 9f /* have already put us at zero */ li r6,0x100 /* Start offset, the first 0x100 */ /* bytes were copied earlier. */ +#ifdef CONFIG_PPC_BOOK3E + tovirt(r6,r6) /* on booke, we already run at PAGE_OFFSET */ +#endif #ifdef CONFIG_CRASH_DUMP /* @@ -485,7 +532,7 @@ _GLOBAL(pmac_secondary_start) LOAD_REG_ADDR(r4,paca) /* Get base vaddr of paca array */ mulli r13,r24,PACA_SIZE /* Calculate vaddr of right paca */ add r13,r13,r4 /* for this processor. */ - mtspr SPRN_SPRG3,r13 /* Save vaddr of paca in SPRG3 */ + mtspr SPRN_SPRG_PACA,r13 /* Save vaddr of paca in an SPRG*/ /* Create a temp kernel stack for use before relocation is on. */ ld r1,PACAEMERGSP(r13) @@ -503,11 +550,14 @@ _GLOBAL(pmac_secondary_start) * 1. Processor number * 2. Segment table pointer (virtual address) * On entry the following are set: - * r1 = stack pointer. vaddr for iSeries, raddr (temp stack) for pSeries - * r24 = cpu# (in Linux terms) - * r13 = paca virtual address - * SPRG3 = paca virtual address + * r1 = stack pointer. vaddr for iSeries, raddr (temp stack) for pSeries + * r24 = cpu# (in Linux terms) + * r13 = paca virtual address + * SPRG_PACA = paca virtual address */ + .section ".text"; + .align 2 ; + .globl __secondary_start __secondary_start: /* Set thread priority to MEDIUM */ @@ -544,7 +594,7 @@ END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES) mtspr SPRN_SRR0,r3 mtspr SPRN_SRR1,r4 - rfid + RFI b . /* prevent speculative execution */ /* @@ -565,11 +615,16 @@ _GLOBAL(start_secondary_prolog) */ _GLOBAL(enable_64b_mode) mfmsr r11 /* grab the current MSR */ +#ifdef CONFIG_PPC_BOOK3E + oris r11,r11,0x8000 /* CM bit set, we'll set ICM later */ + mtmsr r11 +#else /* CONFIG_PPC_BOOK3E */ li r12,(MSR_SF | MSR_ISF)@highest sldi r12,r12,48 or r11,r11,r12 mtmsrd r11 isync +#endif blr /* @@ -613,9 +668,11 @@ _INIT_STATIC(start_here_multiplatform) bdnz 3b 4: +#ifndef CONFIG_PPC_BOOK3E mfmsr r6 ori r6,r6,MSR_RI mtmsrd r6 /* RI on */ +#endif #ifdef CONFIG_RELOCATABLE /* Save the physical address we're running at in kernstart_addr */ @@ -642,13 +699,13 @@ _INIT_STATIC(start_here_multiplatform) /* Restore parameters passed from prom_init/kexec */ mr r3,r31 - bl .early_setup /* also sets r13 and SPRG3 */ + bl .early_setup /* also sets r13 and SPRG_PACA */ LOAD_REG_ADDR(r3, .start_here_common) ld r4,PACAKMSR(r13) mtspr SPRN_SRR0,r3 mtspr SPRN_SRR1,r4 - rfid + RFI b . /* prevent speculative execution */ /* This is where all platforms converge execution */ diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S index 52ff8c53b93c..6ded19d01891 100644 --- a/arch/powerpc/kernel/head_8xx.S +++ b/arch/powerpc/kernel/head_8xx.S @@ -110,8 +110,8 @@ turn_on_mmu: * task's thread_struct. */ #define EXCEPTION_PROLOG \ - mtspr SPRN_SPRG0,r10; \ - mtspr SPRN_SPRG1,r11; \ + mtspr SPRN_SPRG_SCRATCH0,r10; \ + mtspr SPRN_SPRG_SCRATCH1,r11; \ mfcr r10; \ EXCEPTION_PROLOG_1; \ EXCEPTION_PROLOG_2 @@ -121,7 +121,7 @@ turn_on_mmu: andi. r11,r11,MSR_PR; \ tophys(r11,r1); /* use tophys(r1) if kernel */ \ beq 1f; \ - mfspr r11,SPRN_SPRG3; \ + mfspr r11,SPRN_SPRG_THREAD; \ lwz r11,THREAD_INFO-THREAD(r11); \ addi r11,r11,THREAD_SIZE; \ tophys(r11,r11); \ @@ -133,9 +133,9 @@ turn_on_mmu: stw r10,_CCR(r11); /* save registers */ \ stw r12,GPR12(r11); \ stw r9,GPR9(r11); \ - mfspr r10,SPRN_SPRG0; \ + mfspr r10,SPRN_SPRG_SCRATCH0; \ stw r10,GPR10(r11); \ - mfspr r12,SPRN_SPRG1; \ + mfspr r12,SPRN_SPRG_SCRATCH1; \ stw r12,GPR11(r11); \ mflr r10; \ stw r10,_LINK(r11); \ @@ -603,8 +603,9 @@ start_here: /* ptr to phys current thread */ tophys(r4,r2) addi r4,r4,THREAD /* init task's THREAD */ - mtspr SPRN_SPRG3,r4 + mtspr SPRN_SPRG_THREAD,r4 li r3,0 + /* XXX What is that for ? SPRG2 appears otherwise unused on 8xx */ mtspr SPRN_SPRG2,r3 /* 0 => r1 has kernel sp */ /* stack */ diff --git a/arch/powerpc/kernel/head_booke.h b/arch/powerpc/kernel/head_booke.h index 5f9febc8d143..50504ae39cb7 100644 --- a/arch/powerpc/kernel/head_booke.h +++ b/arch/powerpc/kernel/head_booke.h @@ -20,14 +20,14 @@ #endif #define NORMAL_EXCEPTION_PROLOG \ - mtspr SPRN_SPRG0,r10; /* save two registers to work with */\ - mtspr SPRN_SPRG1,r11; \ - mtspr SPRN_SPRG4W,r1; \ + mtspr SPRN_SPRG_WSCRATCH0,r10;/* save two registers to work with */\ + mtspr SPRN_SPRG_WSCRATCH1,r11; \ + mtspr SPRN_SPRG_WSCRATCH2,r1; \ mfcr r10; /* save CR in r10 for now */\ mfspr r11,SPRN_SRR1; /* check whether user or kernel */\ andi. r11,r11,MSR_PR; \ beq 1f; \ - mfspr r1,SPRN_SPRG3; /* if from user, start at top of */\ + mfspr r1,SPRN_SPRG_THREAD; /* if from user, start at top of */\ lwz r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack */\ ALLOC_STACK_FRAME(r1, THREAD_SIZE); \ 1: subi r1,r1,INT_FRAME_SIZE; /* Allocate an exception frame */\ @@ -35,13 +35,13 @@ stw r10,_CCR(r11); /* save various registers */\ stw r12,GPR12(r11); \ stw r9,GPR9(r11); \ - mfspr r10,SPRN_SPRG0; \ + mfspr r10,SPRN_SPRG_RSCRATCH0; \ stw r10,GPR10(r11); \ - mfspr r12,SPRN_SPRG1; \ + mfspr r12,SPRN_SPRG_RSCRATCH1; \ stw r12,GPR11(r11); \ mflr r10; \ stw r10,_LINK(r11); \ - mfspr r10,SPRN_SPRG4R; \ + mfspr r10,SPRN_SPRG_RSCRATCH2; \ mfspr r12,SPRN_SRR0; \ stw r10,GPR1(r11); \ mfspr r9,SPRN_SRR1; \ @@ -69,21 +69,11 @@ * providing configurations that micro-optimize space usage. */ -/* CRIT_SPRG only used in critical exception handling */ -#define CRIT_SPRG SPRN_SPRG2 -/* MCHECK_SPRG only used in machine check exception handling */ -#define MCHECK_SPRG SPRN_SPRG6W - -#define MCHECK_STACK_BASE mcheckirq_ctx +#define MC_STACK_BASE mcheckirq_ctx #define CRIT_STACK_BASE critirq_ctx /* only on e500mc/e200 */ -#define DEBUG_STACK_BASE dbgirq_ctx -#ifdef CONFIG_E200 -#define DEBUG_SPRG SPRN_SPRG6W -#else -#define DEBUG_SPRG SPRN_SPRG9 -#endif +#define DBG_STACK_BASE dbgirq_ctx #define EXC_LVL_FRAME_OVERHEAD (THREAD_SIZE - INT_FRAME_SIZE - EXC_LVL_SIZE) @@ -110,7 +100,7 @@ * critical/machine check exception stack at low physical addresses. */ #define EXC_LEVEL_EXCEPTION_PROLOG(exc_level, exc_level_srr0, exc_level_srr1) \ - mtspr exc_level##_SPRG,r8; \ + mtspr SPRN_SPRG_WSCRATCH_##exc_level,r8; \ BOOKE_LOAD_EXC_LEVEL_STACK(exc_level);/* r8 points to the exc_level stack*/ \ stw r9,GPR9(r8); /* save various registers */\ mfcr r9; /* save CR in r9 for now */\ @@ -119,7 +109,7 @@ stw r9,_CCR(r8); /* save CR on stack */\ mfspr r10,exc_level_srr1; /* check whether user or kernel */\ andi. r10,r10,MSR_PR; \ - mfspr r11,SPRN_SPRG3; /* if from user, start at top of */\ + mfspr r11,SPRN_SPRG_THREAD; /* if from user, start at top of */\ lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\ addi r11,r11,EXC_LVL_FRAME_OVERHEAD; /* allocate stack frame */\ beq 1f; \ @@ -140,7 +130,7 @@ lwz r9,TI_TASK-EXC_LVL_FRAME_OVERHEAD(r11); \ stw r9,TI_TASK-EXC_LVL_FRAME_OVERHEAD(r8); \ mr r11,r8; \ -2: mfspr r8,exc_level##_SPRG; \ +2: mfspr r8,SPRN_SPRG_RSCRATCH_##exc_level; \ stw r12,GPR12(r11); /* save various registers */\ mflr r10; \ stw r10,_LINK(r11); \ @@ -161,9 +151,9 @@ #define CRITICAL_EXCEPTION_PROLOG \ EXC_LEVEL_EXCEPTION_PROLOG(CRIT, SPRN_CSRR0, SPRN_CSRR1) #define DEBUG_EXCEPTION_PROLOG \ - EXC_LEVEL_EXCEPTION_PROLOG(DEBUG, SPRN_DSRR0, SPRN_DSRR1) + EXC_LEVEL_EXCEPTION_PROLOG(DBG, SPRN_DSRR0, SPRN_DSRR1) #define MCHECK_EXCEPTION_PROLOG \ - EXC_LEVEL_EXCEPTION_PROLOG(MCHECK, SPRN_MCSRR0, SPRN_MCSRR1) + EXC_LEVEL_EXCEPTION_PROLOG(MC, SPRN_MCSRR0, SPRN_MCSRR1) /* * Exception vectors. @@ -282,13 +272,13 @@ label: mtspr SPRN_DSRR1,r9; \ lwz r9,GPR9(r11); \ lwz r12,GPR12(r11); \ - mtspr DEBUG_SPRG,r8; \ - BOOKE_LOAD_EXC_LEVEL_STACK(DEBUG); /* r8 points to the debug stack */ \ + mtspr SPRN_SPRG_WSCRATCH_DBG,r8; \ + BOOKE_LOAD_EXC_LEVEL_STACK(DBG); /* r8 points to the debug stack */ \ lwz r10,GPR10(r8); \ lwz r11,GPR11(r8); \ - mfspr r8,DEBUG_SPRG; \ + mfspr r8,SPRN_SPRG_RSCRATCH_DBG; \ \ - PPC_RFDI; \ + PPC_RFDI; \ b .; \ \ /* continue normal handling for a debug exception... */ \ @@ -335,11 +325,11 @@ label: mtspr SPRN_CSRR1,r9; \ lwz r9,GPR9(r11); \ lwz r12,GPR12(r11); \ - mtspr CRIT_SPRG,r8; \ + mtspr SPRN_SPRG_WSCRATCH_CRIT,r8; \ BOOKE_LOAD_EXC_LEVEL_STACK(CRIT); /* r8 points to the debug stack */ \ lwz r10,GPR10(r8); \ lwz r11,GPR11(r8); \ - mfspr r8,CRIT_SPRG; \ + mfspr r8,SPRN_SPRG_RSCRATCH_CRIT; \ \ rfci; \ b .; \ diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index 5bdcc06d294c..975788ca05d2 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -361,7 +361,7 @@ skpinv: addi r6,r6,1 /* Increment */ /* ptr to current thread */ addi r4,r2,THREAD /* init task's THREAD */ - mtspr SPRN_SPRG3,r4 + mtspr SPRN_SPRG_THREAD,r4 /* stack */ lis r1,init_thread_union@h @@ -532,12 +532,12 @@ interrupt_base: /* Data TLB Error Interrupt */ START_EXCEPTION(DataTLBError) - mtspr SPRN_SPRG0, r10 /* Save some working registers */ - mtspr SPRN_SPRG1, r11 - mtspr SPRN_SPRG4W, r12 - mtspr SPRN_SPRG5W, r13 + mtspr SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */ + mtspr SPRN_SPRG_WSCRATCH1, r11 + mtspr SPRN_SPRG_WSCRATCH2, r12 + mtspr SPRN_SPRG_WSCRATCH3, r13 mfcr r11 - mtspr SPRN_SPRG7W, r11 + mtspr SPRN_SPRG_WSCRATCH4, r11 mfspr r10, SPRN_DEAR /* Get faulting address */ /* If we are faulting a kernel address, we have to use the @@ -557,7 +557,7 @@ interrupt_base: /* Get the PGD for the current thread */ 3: - mfspr r11,SPRN_SPRG3 + mfspr r11,SPRN_SPRG_THREAD lwz r11,PGDIR(r11) 4: @@ -575,7 +575,12 @@ interrupt_base: * place or can we save a couple of instructions here ? */ mfspr r12,SPRN_ESR +#ifdef CONFIG_PTE_64BIT + li r13,_PAGE_PRESENT + oris r13,r13,_PAGE_ACCESSED@h +#else li r13,_PAGE_PRESENT|_PAGE_ACCESSED +#endif rlwimi r13,r12,11,29,29 FIND_PTE @@ -598,12 +603,12 @@ interrupt_base: /* The bailout. Restore registers to pre-exception conditions * and call the heavyweights to help us out. */ - mfspr r11, SPRN_SPRG7R + mfspr r11, SPRN_SPRG_RSCRATCH4 mtcr r11 - mfspr r13, SPRN_SPRG5R - mfspr r12, SPRN_SPRG4R - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 + mfspr r13, SPRN_SPRG_RSCRATCH3 + mfspr r12, SPRN_SPRG_RSCRATCH2 + mfspr r11, SPRN_SPRG_RSCRATCH1 + mfspr r10, SPRN_SPRG_RSCRATCH0 b DataStorage /* Instruction TLB Error Interrupt */ @@ -613,12 +618,12 @@ interrupt_base: * to a different point. */ START_EXCEPTION(InstructionTLBError) - mtspr SPRN_SPRG0, r10 /* Save some working registers */ - mtspr SPRN_SPRG1, r11 - mtspr SPRN_SPRG4W, r12 - mtspr SPRN_SPRG5W, r13 + mtspr SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */ + mtspr SPRN_SPRG_WSCRATCH1, r11 + mtspr SPRN_SPRG_WSCRATCH2, r12 + mtspr SPRN_SPRG_WSCRATCH3, r13 mfcr r11 - mtspr SPRN_SPRG7W, r11 + mtspr SPRN_SPRG_WSCRATCH4, r11 mfspr r10, SPRN_SRR0 /* Get faulting address */ /* If we are faulting a kernel address, we have to use the @@ -638,12 +643,17 @@ interrupt_base: /* Get the PGD for the current thread */ 3: - mfspr r11,SPRN_SPRG3 + mfspr r11,SPRN_SPRG_THREAD lwz r11,PGDIR(r11) 4: /* Make up the required permissions */ - li r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_HWEXEC +#ifdef CONFIG_PTE_64BIT + li r13,_PAGE_PRESENT | _PAGE_EXEC + oris r13,r13,_PAGE_ACCESSED@h +#else + li r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC +#endif FIND_PTE andc. r13,r13,r11 /* Check permission */ @@ -666,12 +676,12 @@ interrupt_base: /* The bailout. Restore registers to pre-exception conditions * and call the heavyweights to help us out. */ - mfspr r11, SPRN_SPRG7R + mfspr r11, SPRN_SPRG_RSCRATCH4 mtcr r11 - mfspr r13, SPRN_SPRG5R - mfspr r12, SPRN_SPRG4R - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 + mfspr r13, SPRN_SPRG_RSCRATCH3 + mfspr r12, SPRN_SPRG_RSCRATCH2 + mfspr r11, SPRN_SPRG_RSCRATCH1 + mfspr r10, SPRN_SPRG_RSCRATCH0 b InstructionStorage #ifdef CONFIG_SPE @@ -733,7 +743,7 @@ finish_tlb_load: mfspr r12, SPRN_MAS2 #ifdef CONFIG_PTE_64BIT - rlwimi r12, r11, 26, 24, 31 /* extract ...WIMGE from pte */ + rlwimi r12, r11, 32-19, 27, 31 /* extract WIMGE from pte */ #else rlwimi r12, r11, 26, 27, 31 /* extract WIMGE from pte */ #endif @@ -742,23 +752,27 @@ finish_tlb_load: #endif mtspr SPRN_MAS2, r12 - li r10, (_PAGE_HWEXEC | _PAGE_PRESENT) - rlwimi r10, r11, 31, 29, 29 /* extract _PAGE_DIRTY into SW */ - and r12, r11, r10 - andi. r10, r11, _PAGE_USER /* Test for _PAGE_USER */ - slwi r10, r12, 1 - or r10, r10, r12 - iseleq r12, r12, r10 - #ifdef CONFIG_PTE_64BIT - rlwimi r12, r13, 24, 0, 7 /* grab RPN[32:39] */ - rlwimi r12, r11, 24, 8, 19 /* grab RPN[40:51] */ + rlwinm r12, r11, 32-2, 26, 31 /* Move in perm bits */ + andi. r10, r11, _PAGE_DIRTY + bne 1f + li r10, MAS3_SW | MAS3_UW + andc r12, r12, r10 +1: rlwimi r12, r13, 20, 0, 11 /* grab RPN[32:43] */ + rlwimi r12, r11, 20, 12, 19 /* grab RPN[44:51] */ mtspr SPRN_MAS3, r12 BEGIN_MMU_FTR_SECTION - srwi r10, r13, 8 /* grab RPN[8:31] */ + srwi r10, r13, 12 /* grab RPN[12:31] */ mtspr SPRN_MAS7, r10 END_MMU_FTR_SECTION_IFSET(MMU_FTR_BIG_PHYS) #else + li r10, (_PAGE_EXEC | _PAGE_PRESENT) + rlwimi r10, r11, 31, 29, 29 /* extract _PAGE_DIRTY into SW */ + and r12, r11, r10 + andi. r10, r11, _PAGE_USER /* Test for _PAGE_USER */ + slwi r10, r12, 1 + or r10, r10, r12 + iseleq r12, r12, r10 rlwimi r11, r12, 0, 20, 31 /* Extract RPN from PTE and merge with perms */ mtspr SPRN_MAS3, r11 #endif @@ -790,12 +804,12 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_BIG_PHYS) tlbwe /* Done...restore registers and get out of here. */ - mfspr r11, SPRN_SPRG7R + mfspr r11, SPRN_SPRG_RSCRATCH4 mtcr r11 - mfspr r13, SPRN_SPRG5R - mfspr r12, SPRN_SPRG4R - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 + mfspr r13, SPRN_SPRG_RSCRATCH3 + mfspr r12, SPRN_SPRG_RSCRATCH2 + mfspr r11, SPRN_SPRG_RSCRATCH1 + mfspr r10, SPRN_SPRG_RSCRATCH0 rfi /* Force context change */ #ifdef CONFIG_SPE @@ -839,7 +853,7 @@ load_up_spe: #endif /* !CONFIG_SMP */ /* enable use of SPE after return */ oris r9,r9,MSR_SPE@h - mfspr r5,SPRN_SPRG3 /* current task's THREAD (phys) */ + mfspr r5,SPRN_SPRG_THREAD /* current task's THREAD (phys) */ li r4,1 li r10,THREAD_ACC stw r4,THREAD_USED_SPE(r5) @@ -1118,7 +1132,7 @@ __secondary_start: /* ptr to current thread */ addi r4,r2,THREAD /* address of our thread_struct */ - mtspr SPRN_SPRG3,r4 + mtspr SPRN_SPRG_THREAD,r4 /* Setup the defaults for TLB entries */ li r4,(MAS4_TSIZED(BOOK3E_PAGESZ_4K))@l diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c index 6e3f62493659..a4c8b38b0ba1 100644 --- a/arch/powerpc/kernel/ibmebus.c +++ b/arch/powerpc/kernel/ibmebus.c @@ -127,7 +127,7 @@ static int ibmebus_dma_supported(struct device *dev, u64 mask) return 1; } -static struct dma_mapping_ops ibmebus_dma_ops = { +static struct dma_map_ops ibmebus_dma_ops = { .alloc_coherent = ibmebus_alloc_coherent, .free_coherent = ibmebus_free_coherent, .map_sg = ibmebus_map_sg, diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index f7f376ea7b17..e5d121177984 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -53,7 +53,7 @@ #include <linux/bootmem.h> #include <linux/pci.h> #include <linux/debugfs.h> -#include <linux/perf_counter.h> +#include <linux/perf_event.h> #include <asm/uaccess.h> #include <asm/system.h> @@ -138,9 +138,9 @@ notrace void raw_local_irq_restore(unsigned long en) } #endif /* CONFIG_PPC_STD_MMU_64 */ - if (test_perf_counter_pending()) { - clear_perf_counter_pending(); - perf_counter_do_pending(); + if (test_perf_event_pending()) { + clear_perf_event_pending(); + perf_event_do_pending(); } /* diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c index 2419cc706ff1..ed0ac4e4b8d8 100644 --- a/arch/powerpc/kernel/lparcfg.c +++ b/arch/powerpc/kernel/lparcfg.c @@ -35,6 +35,7 @@ #include <asm/prom.h> #include <asm/vdso_datapage.h> #include <asm/vio.h> +#include <asm/mmu.h> #define MODULE_VERS "1.8" #define MODULE_NAME "lparcfg" @@ -537,6 +538,8 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v) seq_printf(m, "shared_processor_mode=%d\n", lppaca[0].shared_proc); + seq_printf(m, "slb_size=%d\n", mmu_slb_size); + return 0; } diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index 15f28e0de78d..da9c0c4c10f3 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -342,10 +342,17 @@ END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE) addi r3,r3,L1_CACHE_BYTES bdnz 1b sync /* wait for dcbst's to get to ram */ +#ifndef CONFIG_44x mtctr r4 2: icbi 0,r6 addi r6,r6,L1_CACHE_BYTES bdnz 2b +#else + /* Flash invalidate on 44x because we are passed kmapped addresses and + this doesn't work for userspace pages due to the virtually tagged + icache. Sigh. */ + iccci 0, r0 +#endif sync /* additional sync needed on g4 */ isync blr diff --git a/arch/powerpc/kernel/mpc7450-pmu.c b/arch/powerpc/kernel/mpc7450-pmu.c index cc466d039af6..09d72028f317 100644 --- a/arch/powerpc/kernel/mpc7450-pmu.c +++ b/arch/powerpc/kernel/mpc7450-pmu.c @@ -9,7 +9,7 @@ * 2 of the License, or (at your option) any later version. */ #include <linux/string.h> -#include <linux/perf_counter.h> +#include <linux/perf_event.h> #include <asm/reg.h> #include <asm/cputable.h> diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c index 87df428e3588..1a4fc0d11a03 100644 --- a/arch/powerpc/kernel/of_platform.c +++ b/arch/powerpc/kernel/of_platform.c @@ -276,7 +276,7 @@ static int __devinit of_pci_phb_probe(struct of_device *dev, #endif /* CONFIG_EEH */ /* Scan the bus */ - scan_phb(phb); + pcibios_scan_phb(phb, dev->node); if (phb->bus == NULL) return -ENXIO; diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c index e9962c7f8a09..d16b1ea55d44 100644 --- a/arch/powerpc/kernel/paca.c +++ b/arch/powerpc/kernel/paca.c @@ -13,6 +13,7 @@ #include <asm/lppaca.h> #include <asm/paca.h> #include <asm/sections.h> +#include <asm/pgtable.h> /* This symbol is provided by the linker - let it fill in the paca * field correctly */ @@ -87,6 +88,8 @@ void __init initialise_pacas(void) #ifdef CONFIG_PPC_BOOK3S new_paca->lppaca_ptr = &lppaca[cpu]; +#else + new_paca->kernel_pgd = swapper_pg_dir; #endif new_paca->lock_token = 0x8000; new_paca->paca_index = cpu; diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 5a56e97c5ac0..e9f4840096b3 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -50,14 +50,14 @@ resource_size_t isa_mem_base; unsigned int ppc_pci_flags = 0; -static struct dma_mapping_ops *pci_dma_ops = &dma_direct_ops; +static struct dma_map_ops *pci_dma_ops = &dma_direct_ops; -void set_pci_dma_ops(struct dma_mapping_ops *dma_ops) +void set_pci_dma_ops(struct dma_map_ops *dma_ops) { pci_dma_ops = dma_ops; } -struct dma_mapping_ops *get_pci_dma_ops(void) +struct dma_map_ops *get_pci_dma_ops(void) { return pci_dma_ops; } @@ -176,8 +176,6 @@ int pci_domain_nr(struct pci_bus *bus) } EXPORT_SYMBOL(pci_domain_nr); -#ifdef CONFIG_PPC_OF - /* This routine is meant to be used early during boot, when the * PCI bus numbers have not yet been assigned, and you need to * issue PCI config cycles to an OF device. @@ -210,17 +208,11 @@ static ssize_t pci_show_devspec(struct device *dev, return sprintf(buf, "%s", np->full_name); } static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL); -#endif /* CONFIG_PPC_OF */ /* Add sysfs properties */ int pcibios_add_platform_entries(struct pci_dev *pdev) { -#ifdef CONFIG_PPC_OF return device_create_file(&pdev->dev, &dev_attr_devspec); -#else - return 0; -#endif /* CONFIG_PPC_OF */ - } char __devinit *pcibios_setup(char *str) @@ -1626,3 +1618,122 @@ void __devinit pcibios_setup_phb_resources(struct pci_controller *hose) } +/* + * Null PCI config access functions, for the case when we can't + * find a hose. + */ +#define NULL_PCI_OP(rw, size, type) \ +static int \ +null_##rw##_config_##size(struct pci_dev *dev, int offset, type val) \ +{ \ + return PCIBIOS_DEVICE_NOT_FOUND; \ +} + +static int +null_read_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 *val) +{ + return PCIBIOS_DEVICE_NOT_FOUND; +} + +static int +null_write_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 val) +{ + return PCIBIOS_DEVICE_NOT_FOUND; +} + +static struct pci_ops null_pci_ops = +{ + .read = null_read_config, + .write = null_write_config, +}; + +/* + * These functions are used early on before PCI scanning is done + * and all of the pci_dev and pci_bus structures have been created. + */ +static struct pci_bus * +fake_pci_bus(struct pci_controller *hose, int busnr) +{ + static struct pci_bus bus; + + if (hose == 0) { + printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr); + } + bus.number = busnr; + bus.sysdata = hose; + bus.ops = hose? hose->ops: &null_pci_ops; + return &bus; +} + +#define EARLY_PCI_OP(rw, size, type) \ +int early_##rw##_config_##size(struct pci_controller *hose, int bus, \ + int devfn, int offset, type value) \ +{ \ + return pci_bus_##rw##_config_##size(fake_pci_bus(hose, bus), \ + devfn, offset, value); \ +} + +EARLY_PCI_OP(read, byte, u8 *) +EARLY_PCI_OP(read, word, u16 *) +EARLY_PCI_OP(read, dword, u32 *) +EARLY_PCI_OP(write, byte, u8) +EARLY_PCI_OP(write, word, u16) +EARLY_PCI_OP(write, dword, u32) + +extern int pci_bus_find_capability (struct pci_bus *bus, unsigned int devfn, int cap); +int early_find_capability(struct pci_controller *hose, int bus, int devfn, + int cap) +{ + return pci_bus_find_capability(fake_pci_bus(hose, bus), devfn, cap); +} + +/** + * pci_scan_phb - Given a pci_controller, setup and scan the PCI bus + * @hose: Pointer to the PCI host controller instance structure + * @sysdata: value to use for sysdata pointer. ppc32 and ppc64 differ here + * + * Note: the 'data' pointer is a temporary measure. As 32 and 64 bit + * pci code gets merged, this parameter should become unnecessary because + * both will use the same value. + */ +void __devinit pcibios_scan_phb(struct pci_controller *hose, void *sysdata) +{ + struct pci_bus *bus; + struct device_node *node = hose->dn; + int mode; + + pr_debug("PCI: Scanning PHB %s\n", + node ? node->full_name : "<NO NAME>"); + + /* Create an empty bus for the toplevel */ + bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, + sysdata); + if (bus == NULL) { + pr_err("Failed to create bus for PCI domain %04x\n", + hose->global_number); + return; + } + bus->secondary = hose->first_busno; + hose->bus = bus; + + /* Get some IO space for the new PHB */ + pcibios_setup_phb_io_space(hose); + + /* Wire up PHB bus resources */ + pcibios_setup_phb_resources(hose); + + /* Get probe mode and perform scan */ + mode = PCI_PROBE_NORMAL; + if (node && ppc_md.pci_probe_mode) + mode = ppc_md.pci_probe_mode(bus); + pr_debug(" probe mode: %d\n", mode); + if (mode == PCI_PROBE_DEVTREE) { + bus->subordinate = hose->last_busno; + of_scan_bus(node, bus); + } + + if (mode == PCI_PROBE_NORMAL) + hose->last_busno = bus->subordinate = pci_scan_child_bus(bus); +} diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c index 3ae1c666ff92..c13668cf36d9 100644 --- a/arch/powerpc/kernel/pci_32.c +++ b/arch/powerpc/kernel/pci_32.c @@ -34,9 +34,7 @@ int pcibios_assign_bus_offset = 1; void pcibios_make_OF_bus_map(void); static void fixup_cpc710_pci64(struct pci_dev* dev); -#ifdef CONFIG_PPC_OF static u8* pci_to_OF_bus_map; -#endif /* By default, we don't re-assign bus numbers. We do this only on * some pmacs @@ -83,7 +81,6 @@ fixup_cpc710_pci64(struct pci_dev* dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CPC710_PCI64, fixup_cpc710_pci64); -#ifdef CONFIG_PPC_OF /* * Functions below are used on OpenFirmware machines. */ @@ -357,42 +354,15 @@ pci_create_OF_bus_map(void) } } -#else /* CONFIG_PPC_OF */ -void pcibios_make_OF_bus_map(void) +void __devinit pcibios_setup_phb_io_space(struct pci_controller *hose) { -} -#endif /* CONFIG_PPC_OF */ - -static void __devinit pcibios_scan_phb(struct pci_controller *hose) -{ - struct pci_bus *bus; - struct device_node *node = hose->dn; unsigned long io_offset; struct resource *res = &hose->io_resource; - pr_debug("PCI: Scanning PHB %s\n", - node ? node->full_name : "<NO NAME>"); - - /* Create an empty bus for the toplevel */ - bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, hose); - if (bus == NULL) { - printk(KERN_ERR "Failed to create bus for PCI domain %04x\n", - hose->global_number); - return; - } - bus->secondary = hose->first_busno; - hose->bus = bus; - /* Fixup IO space offset */ io_offset = (unsigned long)hose->io_base_virt - isa_io_base; res->start = (res->start + io_offset) & 0xffffffffu; res->end = (res->end + io_offset) & 0xffffffffu; - - /* Wire up PHB bus resources */ - pcibios_setup_phb_resources(hose); - - /* Scan children */ - hose->last_busno = bus->subordinate = pci_scan_child_bus(bus); } static int __init pcibios_init(void) @@ -410,7 +380,7 @@ static int __init pcibios_init(void) if (pci_assign_all_buses) hose->first_busno = next_busno; hose->last_busno = 0xff; - pcibios_scan_phb(hose); + pcibios_scan_phb(hose, hose); pci_bus_add_devices(hose->bus); if (pci_assign_all_buses || next_busno <= hose->last_busno) next_busno = hose->last_busno + pcibios_assign_bus_offset; @@ -478,75 +448,4 @@ long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn) return result; } -/* - * Null PCI config access functions, for the case when we can't - * find a hose. - */ -#define NULL_PCI_OP(rw, size, type) \ -static int \ -null_##rw##_config_##size(struct pci_dev *dev, int offset, type val) \ -{ \ - return PCIBIOS_DEVICE_NOT_FOUND; \ -} -static int -null_read_config(struct pci_bus *bus, unsigned int devfn, int offset, - int len, u32 *val) -{ - return PCIBIOS_DEVICE_NOT_FOUND; -} - -static int -null_write_config(struct pci_bus *bus, unsigned int devfn, int offset, - int len, u32 val) -{ - return PCIBIOS_DEVICE_NOT_FOUND; -} - -static struct pci_ops null_pci_ops = -{ - .read = null_read_config, - .write = null_write_config, -}; - -/* - * These functions are used early on before PCI scanning is done - * and all of the pci_dev and pci_bus structures have been created. - */ -static struct pci_bus * -fake_pci_bus(struct pci_controller *hose, int busnr) -{ - static struct pci_bus bus; - - if (hose == 0) { - hose = pci_bus_to_hose(busnr); - if (hose == 0) - printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr); - } - bus.number = busnr; - bus.sysdata = hose; - bus.ops = hose? hose->ops: &null_pci_ops; - return &bus; -} - -#define EARLY_PCI_OP(rw, size, type) \ -int early_##rw##_config_##size(struct pci_controller *hose, int bus, \ - int devfn, int offset, type value) \ -{ \ - return pci_bus_##rw##_config_##size(fake_pci_bus(hose, bus), \ - devfn, offset, value); \ -} - -EARLY_PCI_OP(read, byte, u8 *) -EARLY_PCI_OP(read, word, u16 *) -EARLY_PCI_OP(read, dword, u32 *) -EARLY_PCI_OP(write, byte, u8) -EARLY_PCI_OP(write, word, u16) -EARLY_PCI_OP(write, dword, u32) - -extern int pci_bus_find_capability (struct pci_bus *bus, unsigned int devfn, int cap); -int early_find_capability(struct pci_controller *hose, int bus, int devfn, - int cap) -{ - return pci_bus_find_capability(fake_pci_bus(hose, bus), devfn, cap); -} diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index 9e8902fa14c7..ba949a2c93ac 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -43,334 +43,6 @@ unsigned long pci_probe_only = 1; unsigned long pci_io_base = ISA_IO_BASE; EXPORT_SYMBOL(pci_io_base); -static u32 get_int_prop(struct device_node *np, const char *name, u32 def) -{ - const u32 *prop; - int len; - - prop = of_get_property(np, name, &len); - if (prop && len >= 4) - return *prop; - return def; -} - -static unsigned int pci_parse_of_flags(u32 addr0, int bridge) -{ - unsigned int flags = 0; - - if (addr0 & 0x02000000) { - flags = IORESOURCE_MEM | PCI_BASE_ADDRESS_SPACE_MEMORY; - flags |= (addr0 >> 22) & PCI_BASE_ADDRESS_MEM_TYPE_64; - flags |= (addr0 >> 28) & PCI_BASE_ADDRESS_MEM_TYPE_1M; - if (addr0 & 0x40000000) - flags |= IORESOURCE_PREFETCH - | PCI_BASE_ADDRESS_MEM_PREFETCH; - /* Note: We don't know whether the ROM has been left enabled - * by the firmware or not. We mark it as disabled (ie, we do - * not set the IORESOURCE_ROM_ENABLE flag) for now rather than - * do a config space read, it will be force-enabled if needed - */ - if (!bridge && (addr0 & 0xff) == 0x30) - flags |= IORESOURCE_READONLY; - } else if (addr0 & 0x01000000) - flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO; - if (flags) - flags |= IORESOURCE_SIZEALIGN; - return flags; -} - - -static void pci_parse_of_addrs(struct device_node *node, struct pci_dev *dev) -{ - u64 base, size; - unsigned int flags; - struct resource *res; - const u32 *addrs; - u32 i; - int proplen; - - addrs = of_get_property(node, "assigned-addresses", &proplen); - if (!addrs) - return; - pr_debug(" parse addresses (%d bytes) @ %p\n", proplen, addrs); - for (; proplen >= 20; proplen -= 20, addrs += 5) { - flags = pci_parse_of_flags(addrs[0], 0); - if (!flags) - continue; - base = of_read_number(&addrs[1], 2); - size = of_read_number(&addrs[3], 2); - if (!size) - continue; - i = addrs[0] & 0xff; - pr_debug(" base: %llx, size: %llx, i: %x\n", - (unsigned long long)base, - (unsigned long long)size, i); - - if (PCI_BASE_ADDRESS_0 <= i && i <= PCI_BASE_ADDRESS_5) { - res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2]; - } else if (i == dev->rom_base_reg) { - res = &dev->resource[PCI_ROM_RESOURCE]; - flags |= IORESOURCE_READONLY | IORESOURCE_CACHEABLE; - } else { - printk(KERN_ERR "PCI: bad cfg reg num 0x%x\n", i); - continue; - } - res->start = base; - res->end = base + size - 1; - res->flags = flags; - res->name = pci_name(dev); - } -} - -struct pci_dev *of_create_pci_dev(struct device_node *node, - struct pci_bus *bus, int devfn) -{ - struct pci_dev *dev; - const char *type; - - dev = alloc_pci_dev(); - if (!dev) - return NULL; - type = of_get_property(node, "device_type", NULL); - if (type == NULL) - type = ""; - - pr_debug(" create device, devfn: %x, type: %s\n", devfn, type); - - dev->bus = bus; - dev->sysdata = node; - dev->dev.parent = bus->bridge; - dev->dev.bus = &pci_bus_type; - dev->devfn = devfn; - dev->multifunction = 0; /* maybe a lie? */ - - dev->vendor = get_int_prop(node, "vendor-id", 0xffff); - dev->device = get_int_prop(node, "device-id", 0xffff); - dev->subsystem_vendor = get_int_prop(node, "subsystem-vendor-id", 0); - dev->subsystem_device = get_int_prop(node, "subsystem-id", 0); - - dev->cfg_size = pci_cfg_space_size(dev); - - dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(bus), - dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn)); - dev->class = get_int_prop(node, "class-code", 0); - dev->revision = get_int_prop(node, "revision-id", 0); - - pr_debug(" class: 0x%x\n", dev->class); - pr_debug(" revision: 0x%x\n", dev->revision); - - dev->current_state = 4; /* unknown power state */ - dev->error_state = pci_channel_io_normal; - dev->dma_mask = 0xffffffff; - - if (!strcmp(type, "pci") || !strcmp(type, "pciex")) { - /* a PCI-PCI bridge */ - dev->hdr_type = PCI_HEADER_TYPE_BRIDGE; - dev->rom_base_reg = PCI_ROM_ADDRESS1; - } else if (!strcmp(type, "cardbus")) { - dev->hdr_type = PCI_HEADER_TYPE_CARDBUS; - } else { - dev->hdr_type = PCI_HEADER_TYPE_NORMAL; - dev->rom_base_reg = PCI_ROM_ADDRESS; - /* Maybe do a default OF mapping here */ - dev->irq = NO_IRQ; - } - - pci_parse_of_addrs(node, dev); - - pr_debug(" adding to system ...\n"); - - pci_device_add(dev, bus); - - return dev; -} -EXPORT_SYMBOL(of_create_pci_dev); - -static void __devinit __of_scan_bus(struct device_node *node, - struct pci_bus *bus, int rescan_existing) -{ - struct device_node *child; - const u32 *reg; - int reglen, devfn; - struct pci_dev *dev; - - pr_debug("of_scan_bus(%s) bus no %d... \n", - node->full_name, bus->number); - - /* Scan direct children */ - for_each_child_of_node(node, child) { - pr_debug(" * %s\n", child->full_name); - reg = of_get_property(child, "reg", ®len); - if (reg == NULL || reglen < 20) - continue; - devfn = (reg[0] >> 8) & 0xff; - - /* create a new pci_dev for this device */ - dev = of_create_pci_dev(child, bus, devfn); - if (!dev) - continue; - pr_debug(" dev header type: %x\n", dev->hdr_type); - } - - /* Apply all fixups necessary. We don't fixup the bus "self" - * for an existing bridge that is being rescanned - */ - if (!rescan_existing) - pcibios_setup_bus_self(bus); - pcibios_setup_bus_devices(bus); - - /* Now scan child busses */ - list_for_each_entry(dev, &bus->devices, bus_list) { - if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE || - dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) { - struct device_node *child = pci_device_to_OF_node(dev); - if (dev) - of_scan_pci_bridge(child, dev); - } - } -} - -void __devinit of_scan_bus(struct device_node *node, - struct pci_bus *bus) -{ - __of_scan_bus(node, bus, 0); -} -EXPORT_SYMBOL_GPL(of_scan_bus); - -void __devinit of_rescan_bus(struct device_node *node, - struct pci_bus *bus) -{ - __of_scan_bus(node, bus, 1); -} -EXPORT_SYMBOL_GPL(of_rescan_bus); - -void __devinit of_scan_pci_bridge(struct device_node *node, - struct pci_dev *dev) -{ - struct pci_bus *bus; - const u32 *busrange, *ranges; - int len, i, mode; - struct resource *res; - unsigned int flags; - u64 size; - - pr_debug("of_scan_pci_bridge(%s)\n", node->full_name); - - /* parse bus-range property */ - busrange = of_get_property(node, "bus-range", &len); - if (busrange == NULL || len != 8) { - printk(KERN_DEBUG "Can't get bus-range for PCI-PCI bridge %s\n", - node->full_name); - return; - } - ranges = of_get_property(node, "ranges", &len); - if (ranges == NULL) { - printk(KERN_DEBUG "Can't get ranges for PCI-PCI bridge %s\n", - node->full_name); - return; - } - - bus = pci_add_new_bus(dev->bus, dev, busrange[0]); - if (!bus) { - printk(KERN_ERR "Failed to create pci bus for %s\n", - node->full_name); - return; - } - - bus->primary = dev->bus->number; - bus->subordinate = busrange[1]; - bus->bridge_ctl = 0; - bus->sysdata = node; - - /* parse ranges property */ - /* PCI #address-cells == 3 and #size-cells == 2 always */ - res = &dev->resource[PCI_BRIDGE_RESOURCES]; - for (i = 0; i < PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES; ++i) { - res->flags = 0; - bus->resource[i] = res; - ++res; - } - i = 1; - for (; len >= 32; len -= 32, ranges += 8) { - flags = pci_parse_of_flags(ranges[0], 1); - size = of_read_number(&ranges[6], 2); - if (flags == 0 || size == 0) - continue; - if (flags & IORESOURCE_IO) { - res = bus->resource[0]; - if (res->flags) { - printk(KERN_ERR "PCI: ignoring extra I/O range" - " for bridge %s\n", node->full_name); - continue; - } - } else { - if (i >= PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES) { - printk(KERN_ERR "PCI: too many memory ranges" - " for bridge %s\n", node->full_name); - continue; - } - res = bus->resource[i]; - ++i; - } - res->start = of_read_number(&ranges[1], 2); - res->end = res->start + size - 1; - res->flags = flags; - } - sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus), - bus->number); - pr_debug(" bus name: %s\n", bus->name); - - mode = PCI_PROBE_NORMAL; - if (ppc_md.pci_probe_mode) - mode = ppc_md.pci_probe_mode(bus); - pr_debug(" probe mode: %d\n", mode); - - if (mode == PCI_PROBE_DEVTREE) - of_scan_bus(node, bus); - else if (mode == PCI_PROBE_NORMAL) - pci_scan_child_bus(bus); -} -EXPORT_SYMBOL(of_scan_pci_bridge); - -void __devinit scan_phb(struct pci_controller *hose) -{ - struct pci_bus *bus; - struct device_node *node = hose->dn; - int mode; - - pr_debug("PCI: Scanning PHB %s\n", - node ? node->full_name : "<NO NAME>"); - - /* Create an empty bus for the toplevel */ - bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, node); - if (bus == NULL) { - printk(KERN_ERR "Failed to create bus for PCI domain %04x\n", - hose->global_number); - return; - } - bus->secondary = hose->first_busno; - hose->bus = bus; - - /* Get some IO space for the new PHB */ - pcibios_map_io_space(bus); - - /* Wire up PHB bus resources */ - pcibios_setup_phb_resources(hose); - - /* Get probe mode and perform scan */ - mode = PCI_PROBE_NORMAL; - if (node && ppc_md.pci_probe_mode) - mode = ppc_md.pci_probe_mode(bus); - pr_debug(" probe mode: %d\n", mode); - if (mode == PCI_PROBE_DEVTREE) { - bus->subordinate = hose->last_busno; - of_scan_bus(node, bus); - } - - if (mode == PCI_PROBE_NORMAL) - hose->last_busno = bus->subordinate = pci_scan_child_bus(bus); -} - static int __init pcibios_init(void) { struct pci_controller *hose, *tmp; @@ -392,7 +64,7 @@ static int __init pcibios_init(void) /* Scan all of the recorded PCI controllers. */ list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { - scan_phb(hose); + pcibios_scan_phb(hose, hose->dn); pci_bus_add_devices(hose->bus); } @@ -526,6 +198,11 @@ int __devinit pcibios_map_io_space(struct pci_bus *bus) } EXPORT_SYMBOL_GPL(pcibios_map_io_space); +void __devinit pcibios_setup_phb_io_space(struct pci_controller *hose) +{ + pcibios_map_io_space(hose->bus); +} + #define IOBASE_BRIDGE_NUMBER 0 #define IOBASE_MEMORY 1 #define IOBASE_IO 2 diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c new file mode 100644 index 000000000000..7311fdfb9bf8 --- /dev/null +++ b/arch/powerpc/kernel/pci_of_scan.c @@ -0,0 +1,359 @@ +/* + * Helper routines to scan the device tree for PCI devices and busses + * + * Migrated out of PowerPC architecture pci_64.c file by Grant Likely + * <grant.likely@secretlab.ca> so that these routines are available for + * 32 bit also. + * + * Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM + * Rework, based on alpha PCI code. + * Copyright (c) 2009 Secret Lab Technologies Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + */ + +#include <linux/pci.h> +#include <asm/pci-bridge.h> +#include <asm/prom.h> + +/** + * get_int_prop - Decode a u32 from a device tree property + */ +static u32 get_int_prop(struct device_node *np, const char *name, u32 def) +{ + const u32 *prop; + int len; + + prop = of_get_property(np, name, &len); + if (prop && len >= 4) + return *prop; + return def; +} + +/** + * pci_parse_of_flags - Parse the flags cell of a device tree PCI address + * @addr0: value of 1st cell of a device tree PCI address. + * @bridge: Set this flag if the address is from a bridge 'ranges' property + */ +unsigned int pci_parse_of_flags(u32 addr0, int bridge) +{ + unsigned int flags = 0; + + if (addr0 & 0x02000000) { + flags = IORESOURCE_MEM | PCI_BASE_ADDRESS_SPACE_MEMORY; + flags |= (addr0 >> 22) & PCI_BASE_ADDRESS_MEM_TYPE_64; + flags |= (addr0 >> 28) & PCI_BASE_ADDRESS_MEM_TYPE_1M; + if (addr0 & 0x40000000) + flags |= IORESOURCE_PREFETCH + | PCI_BASE_ADDRESS_MEM_PREFETCH; + /* Note: We don't know whether the ROM has been left enabled + * by the firmware or not. We mark it as disabled (ie, we do + * not set the IORESOURCE_ROM_ENABLE flag) for now rather than + * do a config space read, it will be force-enabled if needed + */ + if (!bridge && (addr0 & 0xff) == 0x30) + flags |= IORESOURCE_READONLY; + } else if (addr0 & 0x01000000) + flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO; + if (flags) + flags |= IORESOURCE_SIZEALIGN; + return flags; +} + +/** + * of_pci_parse_addrs - Parse PCI addresses assigned in the device tree node + * @node: device tree node for the PCI device + * @dev: pci_dev structure for the device + * + * This function parses the 'assigned-addresses' property of a PCI devices' + * device tree node and writes them into the associated pci_dev structure. + */ +static void of_pci_parse_addrs(struct device_node *node, struct pci_dev *dev) +{ + u64 base, size; + unsigned int flags; + struct resource *res; + const u32 *addrs; + u32 i; + int proplen; + + addrs = of_get_property(node, "assigned-addresses", &proplen); + if (!addrs) + return; + pr_debug(" parse addresses (%d bytes) @ %p\n", proplen, addrs); + for (; proplen >= 20; proplen -= 20, addrs += 5) { + flags = pci_parse_of_flags(addrs[0], 0); + if (!flags) + continue; + base = of_read_number(&addrs[1], 2); + size = of_read_number(&addrs[3], 2); + if (!size) + continue; + i = addrs[0] & 0xff; + pr_debug(" base: %llx, size: %llx, i: %x\n", + (unsigned long long)base, + (unsigned long long)size, i); + + if (PCI_BASE_ADDRESS_0 <= i && i <= PCI_BASE_ADDRESS_5) { + res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2]; + } else if (i == dev->rom_base_reg) { + res = &dev->resource[PCI_ROM_RESOURCE]; + flags |= IORESOURCE_READONLY | IORESOURCE_CACHEABLE; + } else { + printk(KERN_ERR "PCI: bad cfg reg num 0x%x\n", i); + continue; + } + res->start = base; + res->end = base + size - 1; + res->flags = flags; + res->name = pci_name(dev); + } +} + +/** + * of_create_pci_dev - Given a device tree node on a pci bus, create a pci_dev + * @node: device tree node pointer + * @bus: bus the device is sitting on + * @devfn: PCI function number, extracted from device tree by caller. + */ +struct pci_dev *of_create_pci_dev(struct device_node *node, + struct pci_bus *bus, int devfn) +{ + struct pci_dev *dev; + const char *type; + + dev = alloc_pci_dev(); + if (!dev) + return NULL; + type = of_get_property(node, "device_type", NULL); + if (type == NULL) + type = ""; + + pr_debug(" create device, devfn: %x, type: %s\n", devfn, type); + + dev->bus = bus; + dev->sysdata = node; + dev->dev.parent = bus->bridge; + dev->dev.bus = &pci_bus_type; + dev->devfn = devfn; + dev->multifunction = 0; /* maybe a lie? */ + dev->needs_freset = 0; /* pcie fundamental reset required */ + + dev->vendor = get_int_prop(node, "vendor-id", 0xffff); + dev->device = get_int_prop(node, "device-id", 0xffff); + dev->subsystem_vendor = get_int_prop(node, "subsystem-vendor-id", 0); + dev->subsystem_device = get_int_prop(node, "subsystem-id", 0); + + dev->cfg_size = pci_cfg_space_size(dev); + + dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(bus), + dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn)); + dev->class = get_int_prop(node, "class-code", 0); + dev->revision = get_int_prop(node, "revision-id", 0); + + pr_debug(" class: 0x%x\n", dev->class); + pr_debug(" revision: 0x%x\n", dev->revision); + + dev->current_state = 4; /* unknown power state */ + dev->error_state = pci_channel_io_normal; + dev->dma_mask = 0xffffffff; + + if (!strcmp(type, "pci") || !strcmp(type, "pciex")) { + /* a PCI-PCI bridge */ + dev->hdr_type = PCI_HEADER_TYPE_BRIDGE; + dev->rom_base_reg = PCI_ROM_ADDRESS1; + } else if (!strcmp(type, "cardbus")) { + dev->hdr_type = PCI_HEADER_TYPE_CARDBUS; + } else { + dev->hdr_type = PCI_HEADER_TYPE_NORMAL; + dev->rom_base_reg = PCI_ROM_ADDRESS; + /* Maybe do a default OF mapping here */ + dev->irq = NO_IRQ; + } + + of_pci_parse_addrs(node, dev); + + pr_debug(" adding to system ...\n"); + + pci_device_add(dev, bus); + + return dev; +} +EXPORT_SYMBOL(of_create_pci_dev); + +/** + * of_scan_pci_bridge - Set up a PCI bridge and scan for child nodes + * @node: device tree node of bridge + * @dev: pci_dev structure for the bridge + * + * of_scan_bus() calls this routine for each PCI bridge that it finds, and + * this routine in turn call of_scan_bus() recusively to scan for more child + * devices. + */ +void __devinit of_scan_pci_bridge(struct device_node *node, + struct pci_dev *dev) +{ + struct pci_bus *bus; + const u32 *busrange, *ranges; + int len, i, mode; + struct resource *res; + unsigned int flags; + u64 size; + + pr_debug("of_scan_pci_bridge(%s)\n", node->full_name); + + /* parse bus-range property */ + busrange = of_get_property(node, "bus-range", &len); + if (busrange == NULL || len != 8) { + printk(KERN_DEBUG "Can't get bus-range for PCI-PCI bridge %s\n", + node->full_name); + return; + } + ranges = of_get_property(node, "ranges", &len); + if (ranges == NULL) { + printk(KERN_DEBUG "Can't get ranges for PCI-PCI bridge %s\n", + node->full_name); + return; + } + + bus = pci_add_new_bus(dev->bus, dev, busrange[0]); + if (!bus) { + printk(KERN_ERR "Failed to create pci bus for %s\n", + node->full_name); + return; + } + + bus->primary = dev->bus->number; + bus->subordinate = busrange[1]; + bus->bridge_ctl = 0; + bus->sysdata = node; + + /* parse ranges property */ + /* PCI #address-cells == 3 and #size-cells == 2 always */ + res = &dev->resource[PCI_BRIDGE_RESOURCES]; + for (i = 0; i < PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES; ++i) { + res->flags = 0; + bus->resource[i] = res; + ++res; + } + i = 1; + for (; len >= 32; len -= 32, ranges += 8) { + flags = pci_parse_of_flags(ranges[0], 1); + size = of_read_number(&ranges[6], 2); + if (flags == 0 || size == 0) + continue; + if (flags & IORESOURCE_IO) { + res = bus->resource[0]; + if (res->flags) { + printk(KERN_ERR "PCI: ignoring extra I/O range" + " for bridge %s\n", node->full_name); + continue; + } + } else { + if (i >= PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES) { + printk(KERN_ERR "PCI: too many memory ranges" + " for bridge %s\n", node->full_name); + continue; + } + res = bus->resource[i]; + ++i; + } + res->start = of_read_number(&ranges[1], 2); + res->end = res->start + size - 1; + res->flags = flags; + } + sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus), + bus->number); + pr_debug(" bus name: %s\n", bus->name); + + mode = PCI_PROBE_NORMAL; + if (ppc_md.pci_probe_mode) + mode = ppc_md.pci_probe_mode(bus); + pr_debug(" probe mode: %d\n", mode); + + if (mode == PCI_PROBE_DEVTREE) + of_scan_bus(node, bus); + else if (mode == PCI_PROBE_NORMAL) + pci_scan_child_bus(bus); +} +EXPORT_SYMBOL(of_scan_pci_bridge); + +/** + * __of_scan_bus - given a PCI bus node, setup bus and scan for child devices + * @node: device tree node for the PCI bus + * @bus: pci_bus structure for the PCI bus + * @rescan_existing: Flag indicating bus has already been set up + */ +static void __devinit __of_scan_bus(struct device_node *node, + struct pci_bus *bus, int rescan_existing) +{ + struct device_node *child; + const u32 *reg; + int reglen, devfn; + struct pci_dev *dev; + + pr_debug("of_scan_bus(%s) bus no %d... \n", + node->full_name, bus->number); + + /* Scan direct children */ + for_each_child_of_node(node, child) { + pr_debug(" * %s\n", child->full_name); + reg = of_get_property(child, "reg", ®len); + if (reg == NULL || reglen < 20) + continue; + devfn = (reg[0] >> 8) & 0xff; + + /* create a new pci_dev for this device */ + dev = of_create_pci_dev(child, bus, devfn); + if (!dev) + continue; + pr_debug(" dev header type: %x\n", dev->hdr_type); + } + + /* Apply all fixups necessary. We don't fixup the bus "self" + * for an existing bridge that is being rescanned + */ + if (!rescan_existing) + pcibios_setup_bus_self(bus); + pcibios_setup_bus_devices(bus); + + /* Now scan child busses */ + list_for_each_entry(dev, &bus->devices, bus_list) { + if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE || + dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) { + struct device_node *child = pci_device_to_OF_node(dev); + if (dev) + of_scan_pci_bridge(child, dev); + } + } +} + +/** + * of_scan_bus - given a PCI bus node, setup bus and scan for child devices + * @node: device tree node for the PCI bus + * @bus: pci_bus structure for the PCI bus + */ +void __devinit of_scan_bus(struct device_node *node, + struct pci_bus *bus) +{ + __of_scan_bus(node, bus, 0); +} +EXPORT_SYMBOL_GPL(of_scan_bus); + +/** + * of_rescan_bus - given a PCI bus node, scan for child devices + * @node: device tree node for the PCI bus + * @bus: pci_bus structure for the PCI bus + * + * Same as of_scan_bus, but for a pci_bus structure that has already been + * setup. + */ +void __devinit of_rescan_bus(struct device_node *node, + struct pci_bus *bus) +{ + __of_scan_bus(node, bus, 1); +} +EXPORT_SYMBOL_GPL(of_rescan_bus); + diff --git a/arch/powerpc/kernel/perf_callchain.c b/arch/powerpc/kernel/perf_callchain.c new file mode 100644 index 000000000000..0a03cf70d247 --- /dev/null +++ b/arch/powerpc/kernel/perf_callchain.c @@ -0,0 +1,527 @@ +/* + * Performance counter callchain support - powerpc architecture code + * + * Copyright © 2009 Paul Mackerras, IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/perf_event.h> +#include <linux/percpu.h> +#include <linux/uaccess.h> +#include <linux/mm.h> +#include <asm/ptrace.h> +#include <asm/pgtable.h> +#include <asm/sigcontext.h> +#include <asm/ucontext.h> +#include <asm/vdso.h> +#ifdef CONFIG_PPC64 +#include "ppc32.h" +#endif + +/* + * Store another value in a callchain_entry. + */ +static inline void callchain_store(struct perf_callchain_entry *entry, u64 ip) +{ + unsigned int nr = entry->nr; + + if (nr < PERF_MAX_STACK_DEPTH) { + entry->ip[nr] = ip; + entry->nr = nr + 1; + } +} + +/* + * Is sp valid as the address of the next kernel stack frame after prev_sp? + * The next frame may be in a different stack area but should not go + * back down in the same stack area. + */ +static int valid_next_sp(unsigned long sp, unsigned long prev_sp) +{ + if (sp & 0xf) + return 0; /* must be 16-byte aligned */ + if (!validate_sp(sp, current, STACK_FRAME_OVERHEAD)) + return 0; + if (sp >= prev_sp + STACK_FRAME_OVERHEAD) + return 1; + /* + * sp could decrease when we jump off an interrupt stack + * back to the regular process stack. + */ + if ((sp & ~(THREAD_SIZE - 1)) != (prev_sp & ~(THREAD_SIZE - 1))) + return 1; + return 0; +} + +static void perf_callchain_kernel(struct pt_regs *regs, + struct perf_callchain_entry *entry) +{ + unsigned long sp, next_sp; + unsigned long next_ip; + unsigned long lr; + long level = 0; + unsigned long *fp; + + lr = regs->link; + sp = regs->gpr[1]; + callchain_store(entry, PERF_CONTEXT_KERNEL); + callchain_store(entry, regs->nip); + + if (!validate_sp(sp, current, STACK_FRAME_OVERHEAD)) + return; + + for (;;) { + fp = (unsigned long *) sp; + next_sp = fp[0]; + + if (next_sp == sp + STACK_INT_FRAME_SIZE && + fp[STACK_FRAME_MARKER] == STACK_FRAME_REGS_MARKER) { + /* + * This looks like an interrupt frame for an + * interrupt that occurred in the kernel + */ + regs = (struct pt_regs *)(sp + STACK_FRAME_OVERHEAD); + next_ip = regs->nip; + lr = regs->link; + level = 0; + callchain_store(entry, PERF_CONTEXT_KERNEL); + + } else { + if (level == 0) + next_ip = lr; + else + next_ip = fp[STACK_FRAME_LR_SAVE]; + + /* + * We can't tell which of the first two addresses + * we get are valid, but we can filter out the + * obviously bogus ones here. We replace them + * with 0 rather than removing them entirely so + * that userspace can tell which is which. + */ + if ((level == 1 && next_ip == lr) || + (level <= 1 && !kernel_text_address(next_ip))) + next_ip = 0; + + ++level; + } + + callchain_store(entry, next_ip); + if (!valid_next_sp(next_sp, sp)) + return; + sp = next_sp; + } +} + +#ifdef CONFIG_PPC64 + +#ifdef CONFIG_HUGETLB_PAGE +#define is_huge_psize(pagesize) (HPAGE_SHIFT && mmu_huge_psizes[pagesize]) +#else +#define is_huge_psize(pagesize) 0 +#endif + +/* + * On 64-bit we don't want to invoke hash_page on user addresses from + * interrupt context, so if the access faults, we read the page tables + * to find which page (if any) is mapped and access it directly. + */ +static int read_user_stack_slow(void __user *ptr, void *ret, int nb) +{ + pgd_t *pgdir; + pte_t *ptep, pte; + int pagesize; + unsigned long addr = (unsigned long) ptr; + unsigned long offset; + unsigned long pfn; + void *kaddr; + + pgdir = current->mm->pgd; + if (!pgdir) + return -EFAULT; + + pagesize = get_slice_psize(current->mm, addr); + + /* align address to page boundary */ + offset = addr & ((1ul << mmu_psize_defs[pagesize].shift) - 1); + addr -= offset; + + if (is_huge_psize(pagesize)) + ptep = huge_pte_offset(current->mm, addr); + else + ptep = find_linux_pte(pgdir, addr); + + if (ptep == NULL) + return -EFAULT; + pte = *ptep; + if (!pte_present(pte) || !(pte_val(pte) & _PAGE_USER)) + return -EFAULT; + pfn = pte_pfn(pte); + if (!page_is_ram(pfn)) + return -EFAULT; + + /* no highmem to worry about here */ + kaddr = pfn_to_kaddr(pfn); + memcpy(ret, kaddr + offset, nb); + return 0; +} + +static int read_user_stack_64(unsigned long __user *ptr, unsigned long *ret) +{ + if ((unsigned long)ptr > TASK_SIZE - sizeof(unsigned long) || + ((unsigned long)ptr & 7)) + return -EFAULT; + + if (!__get_user_inatomic(*ret, ptr)) + return 0; + + return read_user_stack_slow(ptr, ret, 8); +} + +static int read_user_stack_32(unsigned int __user *ptr, unsigned int *ret) +{ + if ((unsigned long)ptr > TASK_SIZE - sizeof(unsigned int) || + ((unsigned long)ptr & 3)) + return -EFAULT; + + if (!__get_user_inatomic(*ret, ptr)) + return 0; + + return read_user_stack_slow(ptr, ret, 4); +} + +static inline int valid_user_sp(unsigned long sp, int is_64) +{ + if (!sp || (sp & 7) || sp > (is_64 ? TASK_SIZE : 0x100000000UL) - 32) + return 0; + return 1; +} + +/* + * 64-bit user processes use the same stack frame for RT and non-RT signals. + */ +struct signal_frame_64 { + char dummy[__SIGNAL_FRAMESIZE]; + struct ucontext uc; + unsigned long unused[2]; + unsigned int tramp[6]; + struct siginfo *pinfo; + void *puc; + struct siginfo info; + char abigap[288]; +}; + +static int is_sigreturn_64_address(unsigned long nip, unsigned long fp) +{ + if (nip == fp + offsetof(struct signal_frame_64, tramp)) + return 1; + if (vdso64_rt_sigtramp && current->mm->context.vdso_base && + nip == current->mm->context.vdso_base + vdso64_rt_sigtramp) + return 1; + return 0; +} + +/* + * Do some sanity checking on the signal frame pointed to by sp. + * We check the pinfo and puc pointers in the frame. + */ +static int sane_signal_64_frame(unsigned long sp) +{ + struct signal_frame_64 __user *sf; + unsigned long pinfo, puc; + + sf = (struct signal_frame_64 __user *) sp; + if (read_user_stack_64((unsigned long __user *) &sf->pinfo, &pinfo) || + read_user_stack_64((unsigned long __user *) &sf->puc, &puc)) + return 0; + return pinfo == (unsigned long) &sf->info && + puc == (unsigned long) &sf->uc; +} + +static void perf_callchain_user_64(struct pt_regs *regs, + struct perf_callchain_entry *entry) +{ + unsigned long sp, next_sp; + unsigned long next_ip; + unsigned long lr; + long level = 0; + struct signal_frame_64 __user *sigframe; + unsigned long __user *fp, *uregs; + + next_ip = regs->nip; + lr = regs->link; + sp = regs->gpr[1]; + callchain_store(entry, PERF_CONTEXT_USER); + callchain_store(entry, next_ip); + + for (;;) { + fp = (unsigned long __user *) sp; + if (!valid_user_sp(sp, 1) || read_user_stack_64(fp, &next_sp)) + return; + if (level > 0 && read_user_stack_64(&fp[2], &next_ip)) + return; + + /* + * Note: the next_sp - sp >= signal frame size check + * is true when next_sp < sp, which can happen when + * transitioning from an alternate signal stack to the + * normal stack. + */ + if (next_sp - sp >= sizeof(struct signal_frame_64) && + (is_sigreturn_64_address(next_ip, sp) || + (level <= 1 && is_sigreturn_64_address(lr, sp))) && + sane_signal_64_frame(sp)) { + /* + * This looks like an signal frame + */ + sigframe = (struct signal_frame_64 __user *) sp; + uregs = sigframe->uc.uc_mcontext.gp_regs; + if (read_user_stack_64(&uregs[PT_NIP], &next_ip) || + read_user_stack_64(&uregs[PT_LNK], &lr) || + read_user_stack_64(&uregs[PT_R1], &sp)) + return; + level = 0; + callchain_store(entry, PERF_CONTEXT_USER); + callchain_store(entry, next_ip); + continue; + } + + if (level == 0) + next_ip = lr; + callchain_store(entry, next_ip); + ++level; + sp = next_sp; + } +} + +static inline int current_is_64bit(void) +{ + /* + * We can't use test_thread_flag() here because we may be on an + * interrupt stack, and the thread flags don't get copied over + * from the thread_info on the main stack to the interrupt stack. + */ + return !test_ti_thread_flag(task_thread_info(current), TIF_32BIT); +} + +#else /* CONFIG_PPC64 */ +/* + * On 32-bit we just access the address and let hash_page create a + * HPTE if necessary, so there is no need to fall back to reading + * the page tables. Since this is called at interrupt level, + * do_page_fault() won't treat a DSI as a page fault. + */ +static int read_user_stack_32(unsigned int __user *ptr, unsigned int *ret) +{ + if ((unsigned long)ptr > TASK_SIZE - sizeof(unsigned int) || + ((unsigned long)ptr & 3)) + return -EFAULT; + + return __get_user_inatomic(*ret, ptr); +} + +static inline void perf_callchain_user_64(struct pt_regs *regs, + struct perf_callchain_entry *entry) +{ +} + +static inline int current_is_64bit(void) +{ + return 0; +} + +static inline int valid_user_sp(unsigned long sp, int is_64) +{ + if (!sp || (sp & 7) || sp > TASK_SIZE - 32) + return 0; + return 1; +} + +#define __SIGNAL_FRAMESIZE32 __SIGNAL_FRAMESIZE +#define sigcontext32 sigcontext +#define mcontext32 mcontext +#define ucontext32 ucontext +#define compat_siginfo_t struct siginfo + +#endif /* CONFIG_PPC64 */ + +/* + * Layout for non-RT signal frames + */ +struct signal_frame_32 { + char dummy[__SIGNAL_FRAMESIZE32]; + struct sigcontext32 sctx; + struct mcontext32 mctx; + int abigap[56]; +}; + +/* + * Layout for RT signal frames + */ +struct rt_signal_frame_32 { + char dummy[__SIGNAL_FRAMESIZE32 + 16]; + compat_siginfo_t info; + struct ucontext32 uc; + int abigap[56]; +}; + +static int is_sigreturn_32_address(unsigned int nip, unsigned int fp) +{ + if (nip == fp + offsetof(struct signal_frame_32, mctx.mc_pad)) + return 1; + if (vdso32_sigtramp && current->mm->context.vdso_base && + nip == current->mm->context.vdso_base + vdso32_sigtramp) + return 1; + return 0; +} + +static int is_rt_sigreturn_32_address(unsigned int nip, unsigned int fp) +{ + if (nip == fp + offsetof(struct rt_signal_frame_32, + uc.uc_mcontext.mc_pad)) + return 1; + if (vdso32_rt_sigtramp && current->mm->context.vdso_base && + nip == current->mm->context.vdso_base + vdso32_rt_sigtramp) + return 1; + return 0; +} + +static int sane_signal_32_frame(unsigned int sp) +{ + struct signal_frame_32 __user *sf; + unsigned int regs; + + sf = (struct signal_frame_32 __user *) (unsigned long) sp; + if (read_user_stack_32((unsigned int __user *) &sf->sctx.regs, ®s)) + return 0; + return regs == (unsigned long) &sf->mctx; +} + +static int sane_rt_signal_32_frame(unsigned int sp) +{ + struct rt_signal_frame_32 __user *sf; + unsigned int regs; + + sf = (struct rt_signal_frame_32 __user *) (unsigned long) sp; + if (read_user_stack_32((unsigned int __user *) &sf->uc.uc_regs, ®s)) + return 0; + return regs == (unsigned long) &sf->uc.uc_mcontext; +} + +static unsigned int __user *signal_frame_32_regs(unsigned int sp, + unsigned int next_sp, unsigned int next_ip) +{ + struct mcontext32 __user *mctx = NULL; + struct signal_frame_32 __user *sf; + struct rt_signal_frame_32 __user *rt_sf; + + /* + * Note: the next_sp - sp >= signal frame size check + * is true when next_sp < sp, for example, when + * transitioning from an alternate signal stack to the + * normal stack. + */ + if (next_sp - sp >= sizeof(struct signal_frame_32) && + is_sigreturn_32_address(next_ip, sp) && + sane_signal_32_frame(sp)) { + sf = (struct signal_frame_32 __user *) (unsigned long) sp; + mctx = &sf->mctx; + } + + if (!mctx && next_sp - sp >= sizeof(struct rt_signal_frame_32) && + is_rt_sigreturn_32_address(next_ip, sp) && + sane_rt_signal_32_frame(sp)) { + rt_sf = (struct rt_signal_frame_32 __user *) (unsigned long) sp; + mctx = &rt_sf->uc.uc_mcontext; + } + + if (!mctx) + return NULL; + return mctx->mc_gregs; +} + +static void perf_callchain_user_32(struct pt_regs *regs, + struct perf_callchain_entry *entry) +{ + unsigned int sp, next_sp; + unsigned int next_ip; + unsigned int lr; + long level = 0; + unsigned int __user *fp, *uregs; + + next_ip = regs->nip; + lr = regs->link; + sp = regs->gpr[1]; + callchain_store(entry, PERF_CONTEXT_USER); + callchain_store(entry, next_ip); + + while (entry->nr < PERF_MAX_STACK_DEPTH) { + fp = (unsigned int __user *) (unsigned long) sp; + if (!valid_user_sp(sp, 0) || read_user_stack_32(fp, &next_sp)) + return; + if (level > 0 && read_user_stack_32(&fp[1], &next_ip)) + return; + + uregs = signal_frame_32_regs(sp, next_sp, next_ip); + if (!uregs && level <= 1) + uregs = signal_frame_32_regs(sp, next_sp, lr); + if (uregs) { + /* + * This looks like an signal frame, so restart + * the stack trace with the values in it. + */ + if (read_user_stack_32(&uregs[PT_NIP], &next_ip) || + read_user_stack_32(&uregs[PT_LNK], &lr) || + read_user_stack_32(&uregs[PT_R1], &sp)) + return; + level = 0; + callchain_store(entry, PERF_CONTEXT_USER); + callchain_store(entry, next_ip); + continue; + } + + if (level == 0) + next_ip = lr; + callchain_store(entry, next_ip); + ++level; + sp = next_sp; + } +} + +/* + * Since we can't get PMU interrupts inside a PMU interrupt handler, + * we don't need separate irq and nmi entries here. + */ +static DEFINE_PER_CPU(struct perf_callchain_entry, callchain); + +struct perf_callchain_entry *perf_callchain(struct pt_regs *regs) +{ + struct perf_callchain_entry *entry = &__get_cpu_var(callchain); + + entry->nr = 0; + + if (current->pid == 0) /* idle task? */ + return entry; + + if (!user_mode(regs)) { + perf_callchain_kernel(regs, entry); + if (current->mm) + regs = task_pt_regs(current); + else + regs = NULL; + } + + if (regs) { + if (current_is_64bit()) + perf_callchain_user_64(regs, entry); + else + perf_callchain_user_32(regs, entry); + } + + return entry; +} diff --git a/arch/powerpc/kernel/perf_counter.c b/arch/powerpc/kernel/perf_event.c index 70e1f57f7dd8..bbcbae183e92 100644 --- a/arch/powerpc/kernel/perf_counter.c +++ b/arch/powerpc/kernel/perf_event.c @@ -1,5 +1,5 @@ /* - * Performance counter support - powerpc architecture code + * Performance event support - powerpc architecture code * * Copyright 2008-2009 Paul Mackerras, IBM Corporation. * @@ -10,7 +10,7 @@ */ #include <linux/kernel.h> #include <linux/sched.h> -#include <linux/perf_counter.h> +#include <linux/perf_event.h> #include <linux/percpu.h> #include <linux/hardirq.h> #include <asm/reg.h> @@ -19,21 +19,24 @@ #include <asm/firmware.h> #include <asm/ptrace.h> -struct cpu_hw_counters { - int n_counters; +struct cpu_hw_events { + int n_events; int n_percpu; int disabled; int n_added; int n_limited; u8 pmcs_enabled; - struct perf_counter *counter[MAX_HWCOUNTERS]; - u64 events[MAX_HWCOUNTERS]; - unsigned int flags[MAX_HWCOUNTERS]; + struct perf_event *event[MAX_HWEVENTS]; + u64 events[MAX_HWEVENTS]; + unsigned int flags[MAX_HWEVENTS]; unsigned long mmcr[3]; - struct perf_counter *limited_counter[MAX_LIMITED_HWCOUNTERS]; + struct perf_event *limited_counter[MAX_LIMITED_HWCOUNTERS]; u8 limited_hwidx[MAX_LIMITED_HWCOUNTERS]; + u64 alternatives[MAX_HWEVENTS][MAX_EVENT_ALTERNATIVES]; + unsigned long amasks[MAX_HWEVENTS][MAX_EVENT_ALTERNATIVES]; + unsigned long avalues[MAX_HWEVENTS][MAX_EVENT_ALTERNATIVES]; }; -DEFINE_PER_CPU(struct cpu_hw_counters, cpu_hw_counters); +DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events); struct power_pmu *ppmu; @@ -44,7 +47,7 @@ struct power_pmu *ppmu; * where the hypervisor bit is forced to 1 (as on Apple G5 processors), * then we need to use the FCHV bit to ignore kernel events. */ -static unsigned int freeze_counters_kernel = MMCR0_FCS; +static unsigned int freeze_events_kernel = MMCR0_FCS; /* * 32-bit doesn't have MMCRA but does have an MMCR2, @@ -62,7 +65,6 @@ static inline unsigned long perf_ip_adjust(struct pt_regs *regs) { return 0; } -static inline void perf_set_pmu_inuse(int inuse) { } static inline void perf_get_data_addr(struct pt_regs *regs, u64 *addrp) { } static inline u32 perf_get_misc_flags(struct pt_regs *regs) { @@ -93,11 +95,6 @@ static inline unsigned long perf_ip_adjust(struct pt_regs *regs) return 0; } -static inline void perf_set_pmu_inuse(int inuse) -{ - get_lppaca()->pmcregs_in_use = inuse; -} - /* * The user wants a data address recorded. * If we're not doing instruction sampling, give them the SDAR @@ -125,14 +122,14 @@ static inline u32 perf_get_misc_flags(struct pt_regs *regs) if (ppmu->flags & PPMU_ALT_SIPR) { if (mmcra & POWER6_MMCRA_SIHV) - return PERF_EVENT_MISC_HYPERVISOR; + return PERF_RECORD_MISC_HYPERVISOR; return (mmcra & POWER6_MMCRA_SIPR) ? - PERF_EVENT_MISC_USER : PERF_EVENT_MISC_KERNEL; + PERF_RECORD_MISC_USER : PERF_RECORD_MISC_KERNEL; } if (mmcra & MMCRA_SIHV) - return PERF_EVENT_MISC_HYPERVISOR; - return (mmcra & MMCRA_SIPR) ? PERF_EVENT_MISC_USER : - PERF_EVENT_MISC_KERNEL; + return PERF_RECORD_MISC_HYPERVISOR; + return (mmcra & MMCRA_SIPR) ? PERF_RECORD_MISC_USER : + PERF_RECORD_MISC_KERNEL; } /* @@ -155,9 +152,9 @@ static inline int perf_intr_is_nmi(struct pt_regs *regs) #endif /* CONFIG_PPC64 */ -static void perf_counter_interrupt(struct pt_regs *regs); +static void perf_event_interrupt(struct pt_regs *regs); -void perf_counter_print_debug(void) +void perf_event_print_debug(void) { } @@ -243,17 +240,15 @@ static void write_pmc(int idx, unsigned long val) * Check if a set of events can all go on the PMU at once. * If they can't, this will look at alternative codes for the events * and see if any combination of alternative codes is feasible. - * The feasible set is returned in event[]. + * The feasible set is returned in event_id[]. */ -static int power_check_constraints(u64 event[], unsigned int cflags[], +static int power_check_constraints(struct cpu_hw_events *cpuhw, + u64 event_id[], unsigned int cflags[], int n_ev) { unsigned long mask, value, nv; - u64 alternatives[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES]; - unsigned long amasks[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES]; - unsigned long avalues[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES]; - unsigned long smasks[MAX_HWCOUNTERS], svalues[MAX_HWCOUNTERS]; - int n_alt[MAX_HWCOUNTERS], choice[MAX_HWCOUNTERS]; + unsigned long smasks[MAX_HWEVENTS], svalues[MAX_HWEVENTS]; + int n_alt[MAX_HWEVENTS], choice[MAX_HWEVENTS]; int i, j; unsigned long addf = ppmu->add_fields; unsigned long tadd = ppmu->test_adder; @@ -264,23 +259,25 @@ static int power_check_constraints(u64 event[], unsigned int cflags[], /* First see if the events will go on as-is */ for (i = 0; i < n_ev; ++i) { if ((cflags[i] & PPMU_LIMITED_PMC_REQD) - && !ppmu->limited_pmc_event(event[i])) { - ppmu->get_alternatives(event[i], cflags[i], - alternatives[i]); - event[i] = alternatives[i][0]; + && !ppmu->limited_pmc_event(event_id[i])) { + ppmu->get_alternatives(event_id[i], cflags[i], + cpuhw->alternatives[i]); + event_id[i] = cpuhw->alternatives[i][0]; } - if (ppmu->get_constraint(event[i], &amasks[i][0], - &avalues[i][0])) + if (ppmu->get_constraint(event_id[i], &cpuhw->amasks[i][0], + &cpuhw->avalues[i][0])) return -1; } value = mask = 0; for (i = 0; i < n_ev; ++i) { - nv = (value | avalues[i][0]) + (value & avalues[i][0] & addf); + nv = (value | cpuhw->avalues[i][0]) + + (value & cpuhw->avalues[i][0] & addf); if ((((nv + tadd) ^ value) & mask) != 0 || - (((nv + tadd) ^ avalues[i][0]) & amasks[i][0]) != 0) + (((nv + tadd) ^ cpuhw->avalues[i][0]) & + cpuhw->amasks[i][0]) != 0) break; value = nv; - mask |= amasks[i][0]; + mask |= cpuhw->amasks[i][0]; } if (i == n_ev) return 0; /* all OK */ @@ -290,11 +287,12 @@ static int power_check_constraints(u64 event[], unsigned int cflags[], return -1; for (i = 0; i < n_ev; ++i) { choice[i] = 0; - n_alt[i] = ppmu->get_alternatives(event[i], cflags[i], - alternatives[i]); + n_alt[i] = ppmu->get_alternatives(event_id[i], cflags[i], + cpuhw->alternatives[i]); for (j = 1; j < n_alt[i]; ++j) - ppmu->get_constraint(alternatives[i][j], - &amasks[i][j], &avalues[i][j]); + ppmu->get_constraint(cpuhw->alternatives[i][j], + &cpuhw->amasks[i][j], + &cpuhw->avalues[i][j]); } /* enumerate all possibilities and see if any will work */ @@ -309,37 +307,37 @@ static int power_check_constraints(u64 event[], unsigned int cflags[], j = choice[i]; } /* - * See if any alternative k for event i, + * See if any alternative k for event_id i, * where k > j, will satisfy the constraints. */ while (++j < n_alt[i]) { - nv = (value | avalues[i][j]) + - (value & avalues[i][j] & addf); + nv = (value | cpuhw->avalues[i][j]) + + (value & cpuhw->avalues[i][j] & addf); if ((((nv + tadd) ^ value) & mask) == 0 && - (((nv + tadd) ^ avalues[i][j]) - & amasks[i][j]) == 0) + (((nv + tadd) ^ cpuhw->avalues[i][j]) + & cpuhw->amasks[i][j]) == 0) break; } if (j >= n_alt[i]) { /* * No feasible alternative, backtrack - * to event i-1 and continue enumerating its + * to event_id i-1 and continue enumerating its * alternatives from where we got up to. */ if (--i < 0) return -1; } else { /* - * Found a feasible alternative for event i, - * remember where we got up to with this event, - * go on to the next event, and start with + * Found a feasible alternative for event_id i, + * remember where we got up to with this event_id, + * go on to the next event_id, and start with * the first alternative for it. */ choice[i] = j; svalues[i] = value; smasks[i] = mask; value = nv; - mask |= amasks[i][j]; + mask |= cpuhw->amasks[i][j]; ++i; j = -1; } @@ -347,21 +345,21 @@ static int power_check_constraints(u64 event[], unsigned int cflags[], /* OK, we have a feasible combination, tell the caller the solution */ for (i = 0; i < n_ev; ++i) - event[i] = alternatives[i][choice[i]]; + event_id[i] = cpuhw->alternatives[i][choice[i]]; return 0; } /* - * Check if newly-added counters have consistent settings for + * Check if newly-added events have consistent settings for * exclude_{user,kernel,hv} with each other and any previously - * added counters. + * added events. */ -static int check_excludes(struct perf_counter **ctrs, unsigned int cflags[], +static int check_excludes(struct perf_event **ctrs, unsigned int cflags[], int n_prev, int n_new) { int eu = 0, ek = 0, eh = 0; int i, n, first; - struct perf_counter *counter; + struct perf_event *event; n = n_prev + n_new; if (n <= 1) @@ -373,15 +371,15 @@ static int check_excludes(struct perf_counter **ctrs, unsigned int cflags[], cflags[i] &= ~PPMU_LIMITED_PMC_REQD; continue; } - counter = ctrs[i]; + event = ctrs[i]; if (first) { - eu = counter->attr.exclude_user; - ek = counter->attr.exclude_kernel; - eh = counter->attr.exclude_hv; + eu = event->attr.exclude_user; + ek = event->attr.exclude_kernel; + eh = event->attr.exclude_hv; first = 0; - } else if (counter->attr.exclude_user != eu || - counter->attr.exclude_kernel != ek || - counter->attr.exclude_hv != eh) { + } else if (event->attr.exclude_user != eu || + event->attr.exclude_kernel != ek || + event->attr.exclude_hv != eh) { return -EAGAIN; } } @@ -394,11 +392,11 @@ static int check_excludes(struct perf_counter **ctrs, unsigned int cflags[], return 0; } -static void power_pmu_read(struct perf_counter *counter) +static void power_pmu_read(struct perf_event *event) { s64 val, delta, prev; - if (!counter->hw.idx) + if (!event->hw.idx) return; /* * Performance monitor interrupts come even when interrupts @@ -406,21 +404,21 @@ static void power_pmu_read(struct perf_counter *counter) * Therefore we treat them like NMIs. */ do { - prev = atomic64_read(&counter->hw.prev_count); + prev = atomic64_read(&event->hw.prev_count); barrier(); - val = read_pmc(counter->hw.idx); - } while (atomic64_cmpxchg(&counter->hw.prev_count, prev, val) != prev); + val = read_pmc(event->hw.idx); + } while (atomic64_cmpxchg(&event->hw.prev_count, prev, val) != prev); /* The counters are only 32 bits wide */ delta = (val - prev) & 0xfffffffful; - atomic64_add(delta, &counter->count); - atomic64_sub(delta, &counter->hw.period_left); + atomic64_add(delta, &event->count); + atomic64_sub(delta, &event->hw.period_left); } /* * On some machines, PMC5 and PMC6 can't be written, don't respect * the freeze conditions, and don't generate interrupts. This tells - * us if `counter' is using such a PMC. + * us if `event' is using such a PMC. */ static int is_limited_pmc(int pmcnum) { @@ -428,53 +426,53 @@ static int is_limited_pmc(int pmcnum) && (pmcnum == 5 || pmcnum == 6); } -static void freeze_limited_counters(struct cpu_hw_counters *cpuhw, +static void freeze_limited_counters(struct cpu_hw_events *cpuhw, unsigned long pmc5, unsigned long pmc6) { - struct perf_counter *counter; + struct perf_event *event; u64 val, prev, delta; int i; for (i = 0; i < cpuhw->n_limited; ++i) { - counter = cpuhw->limited_counter[i]; - if (!counter->hw.idx) + event = cpuhw->limited_counter[i]; + if (!event->hw.idx) continue; - val = (counter->hw.idx == 5) ? pmc5 : pmc6; - prev = atomic64_read(&counter->hw.prev_count); - counter->hw.idx = 0; + val = (event->hw.idx == 5) ? pmc5 : pmc6; + prev = atomic64_read(&event->hw.prev_count); + event->hw.idx = 0; delta = (val - prev) & 0xfffffffful; - atomic64_add(delta, &counter->count); + atomic64_add(delta, &event->count); } } -static void thaw_limited_counters(struct cpu_hw_counters *cpuhw, +static void thaw_limited_counters(struct cpu_hw_events *cpuhw, unsigned long pmc5, unsigned long pmc6) { - struct perf_counter *counter; + struct perf_event *event; u64 val; int i; for (i = 0; i < cpuhw->n_limited; ++i) { - counter = cpuhw->limited_counter[i]; - counter->hw.idx = cpuhw->limited_hwidx[i]; - val = (counter->hw.idx == 5) ? pmc5 : pmc6; - atomic64_set(&counter->hw.prev_count, val); - perf_counter_update_userpage(counter); + event = cpuhw->limited_counter[i]; + event->hw.idx = cpuhw->limited_hwidx[i]; + val = (event->hw.idx == 5) ? pmc5 : pmc6; + atomic64_set(&event->hw.prev_count, val); + perf_event_update_userpage(event); } } /* - * Since limited counters don't respect the freeze conditions, we + * Since limited events don't respect the freeze conditions, we * have to read them immediately after freezing or unfreezing the - * other counters. We try to keep the values from the limited - * counters as consistent as possible by keeping the delay (in + * other events. We try to keep the values from the limited + * events as consistent as possible by keeping the delay (in * cycles and instructions) between freezing/unfreezing and reading - * the limited counters as small and consistent as possible. - * Therefore, if any limited counters are in use, we read them + * the limited events as small and consistent as possible. + * Therefore, if any limited events are in use, we read them * both, and always in the same order, to minimize variability, * and do it inside the same asm that writes MMCR0. */ -static void write_mmcr0(struct cpu_hw_counters *cpuhw, unsigned long mmcr0) +static void write_mmcr0(struct cpu_hw_events *cpuhw, unsigned long mmcr0) { unsigned long pmc5, pmc6; @@ -487,7 +485,7 @@ static void write_mmcr0(struct cpu_hw_counters *cpuhw, unsigned long mmcr0) * Write MMCR0, then read PMC5 and PMC6 immediately. * To ensure we don't get a performance monitor interrupt * between writing MMCR0 and freezing/thawing the limited - * counters, we first write MMCR0 with the counter overflow + * events, we first write MMCR0 with the event overflow * interrupt enable bits turned off. */ asm volatile("mtspr %3,%2; mfspr %0,%4; mfspr %1,%5" @@ -502,7 +500,7 @@ static void write_mmcr0(struct cpu_hw_counters *cpuhw, unsigned long mmcr0) thaw_limited_counters(cpuhw, pmc5, pmc6); /* - * Write the full MMCR0 including the counter overflow interrupt + * Write the full MMCR0 including the event overflow interrupt * enable bits, if necessary. */ if (mmcr0 & (MMCR0_PMC1CE | MMCR0_PMCjCE)) @@ -510,18 +508,18 @@ static void write_mmcr0(struct cpu_hw_counters *cpuhw, unsigned long mmcr0) } /* - * Disable all counters to prevent PMU interrupts and to allow - * counters to be added or removed. + * Disable all events to prevent PMU interrupts and to allow + * events to be added or removed. */ void hw_perf_disable(void) { - struct cpu_hw_counters *cpuhw; + struct cpu_hw_events *cpuhw; unsigned long flags; if (!ppmu) return; local_irq_save(flags); - cpuhw = &__get_cpu_var(cpu_hw_counters); + cpuhw = &__get_cpu_var(cpu_hw_events); if (!cpuhw->disabled) { cpuhw->disabled = 1; @@ -531,8 +529,7 @@ void hw_perf_disable(void) * Check if we ever enabled the PMU on this cpu. */ if (!cpuhw->pmcs_enabled) { - if (ppc_md.enable_pmcs) - ppc_md.enable_pmcs(); + ppc_enable_pmcs(); cpuhw->pmcs_enabled = 1; } @@ -548,7 +545,7 @@ void hw_perf_disable(void) /* * Set the 'freeze counters' bit. * The barrier is to make sure the mtspr has been - * executed and the PMU has frozen the counters + * executed and the PMU has frozen the events * before we return. */ write_mmcr0(cpuhw, mfspr(SPRN_MMCR0) | MMCR0_FC); @@ -558,26 +555,26 @@ void hw_perf_disable(void) } /* - * Re-enable all counters if disable == 0. - * If we were previously disabled and counters were added, then + * Re-enable all events if disable == 0. + * If we were previously disabled and events were added, then * put the new config on the PMU. */ void hw_perf_enable(void) { - struct perf_counter *counter; - struct cpu_hw_counters *cpuhw; + struct perf_event *event; + struct cpu_hw_events *cpuhw; unsigned long flags; long i; unsigned long val; s64 left; - unsigned int hwc_index[MAX_HWCOUNTERS]; + unsigned int hwc_index[MAX_HWEVENTS]; int n_lim; int idx; if (!ppmu) return; local_irq_save(flags); - cpuhw = &__get_cpu_var(cpu_hw_counters); + cpuhw = &__get_cpu_var(cpu_hw_events); if (!cpuhw->disabled) { local_irq_restore(flags); return; @@ -585,23 +582,23 @@ void hw_perf_enable(void) cpuhw->disabled = 0; /* - * If we didn't change anything, or only removed counters, + * If we didn't change anything, or only removed events, * no need to recalculate MMCR* settings and reset the PMCs. * Just reenable the PMU with the current MMCR* settings - * (possibly updated for removal of counters). + * (possibly updated for removal of events). */ if (!cpuhw->n_added) { mtspr(SPRN_MMCRA, cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE); mtspr(SPRN_MMCR1, cpuhw->mmcr[1]); - if (cpuhw->n_counters == 0) - perf_set_pmu_inuse(0); + if (cpuhw->n_events == 0) + ppc_set_pmu_inuse(0); goto out_enable; } /* - * Compute MMCR* values for the new set of counters + * Compute MMCR* values for the new set of events */ - if (ppmu->compute_mmcr(cpuhw->events, cpuhw->n_counters, hwc_index, + if (ppmu->compute_mmcr(cpuhw->events, cpuhw->n_events, hwc_index, cpuhw->mmcr)) { /* shouldn't ever get here */ printk(KERN_ERR "oops compute_mmcr failed\n"); @@ -610,67 +607,67 @@ void hw_perf_enable(void) /* * Add in MMCR0 freeze bits corresponding to the - * attr.exclude_* bits for the first counter. - * We have already checked that all counters have the - * same values for these bits as the first counter. + * attr.exclude_* bits for the first event. + * We have already checked that all events have the + * same values for these bits as the first event. */ - counter = cpuhw->counter[0]; - if (counter->attr.exclude_user) + event = cpuhw->event[0]; + if (event->attr.exclude_user) cpuhw->mmcr[0] |= MMCR0_FCP; - if (counter->attr.exclude_kernel) - cpuhw->mmcr[0] |= freeze_counters_kernel; - if (counter->attr.exclude_hv) + if (event->attr.exclude_kernel) + cpuhw->mmcr[0] |= freeze_events_kernel; + if (event->attr.exclude_hv) cpuhw->mmcr[0] |= MMCR0_FCHV; /* * Write the new configuration to MMCR* with the freeze - * bit set and set the hardware counters to their initial values. - * Then unfreeze the counters. + * bit set and set the hardware events to their initial values. + * Then unfreeze the events. */ - perf_set_pmu_inuse(1); + ppc_set_pmu_inuse(1); mtspr(SPRN_MMCRA, cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE); mtspr(SPRN_MMCR1, cpuhw->mmcr[1]); mtspr(SPRN_MMCR0, (cpuhw->mmcr[0] & ~(MMCR0_PMC1CE | MMCR0_PMCjCE)) | MMCR0_FC); /* - * Read off any pre-existing counters that need to move + * Read off any pre-existing events that need to move * to another PMC. */ - for (i = 0; i < cpuhw->n_counters; ++i) { - counter = cpuhw->counter[i]; - if (counter->hw.idx && counter->hw.idx != hwc_index[i] + 1) { - power_pmu_read(counter); - write_pmc(counter->hw.idx, 0); - counter->hw.idx = 0; + for (i = 0; i < cpuhw->n_events; ++i) { + event = cpuhw->event[i]; + if (event->hw.idx && event->hw.idx != hwc_index[i] + 1) { + power_pmu_read(event); + write_pmc(event->hw.idx, 0); + event->hw.idx = 0; } } /* - * Initialize the PMCs for all the new and moved counters. + * Initialize the PMCs for all the new and moved events. */ cpuhw->n_limited = n_lim = 0; - for (i = 0; i < cpuhw->n_counters; ++i) { - counter = cpuhw->counter[i]; - if (counter->hw.idx) + for (i = 0; i < cpuhw->n_events; ++i) { + event = cpuhw->event[i]; + if (event->hw.idx) continue; idx = hwc_index[i] + 1; if (is_limited_pmc(idx)) { - cpuhw->limited_counter[n_lim] = counter; + cpuhw->limited_counter[n_lim] = event; cpuhw->limited_hwidx[n_lim] = idx; ++n_lim; continue; } val = 0; - if (counter->hw.sample_period) { - left = atomic64_read(&counter->hw.period_left); + if (event->hw.sample_period) { + left = atomic64_read(&event->hw.period_left); if (left < 0x80000000L) val = 0x80000000L - left; } - atomic64_set(&counter->hw.prev_count, val); - counter->hw.idx = idx; + atomic64_set(&event->hw.prev_count, val); + event->hw.idx = idx; write_pmc(idx, val); - perf_counter_update_userpage(counter); + perf_event_update_userpage(event); } cpuhw->n_limited = n_lim; cpuhw->mmcr[0] |= MMCR0_PMXE | MMCR0_FCECE; @@ -691,85 +688,85 @@ void hw_perf_enable(void) local_irq_restore(flags); } -static int collect_events(struct perf_counter *group, int max_count, - struct perf_counter *ctrs[], u64 *events, +static int collect_events(struct perf_event *group, int max_count, + struct perf_event *ctrs[], u64 *events, unsigned int *flags) { int n = 0; - struct perf_counter *counter; + struct perf_event *event; - if (!is_software_counter(group)) { + if (!is_software_event(group)) { if (n >= max_count) return -1; ctrs[n] = group; - flags[n] = group->hw.counter_base; + flags[n] = group->hw.event_base; events[n++] = group->hw.config; } - list_for_each_entry(counter, &group->sibling_list, list_entry) { - if (!is_software_counter(counter) && - counter->state != PERF_COUNTER_STATE_OFF) { + list_for_each_entry(event, &group->sibling_list, group_entry) { + if (!is_software_event(event) && + event->state != PERF_EVENT_STATE_OFF) { if (n >= max_count) return -1; - ctrs[n] = counter; - flags[n] = counter->hw.counter_base; - events[n++] = counter->hw.config; + ctrs[n] = event; + flags[n] = event->hw.event_base; + events[n++] = event->hw.config; } } return n; } -static void counter_sched_in(struct perf_counter *counter, int cpu) +static void event_sched_in(struct perf_event *event, int cpu) { - counter->state = PERF_COUNTER_STATE_ACTIVE; - counter->oncpu = cpu; - counter->tstamp_running += counter->ctx->time - counter->tstamp_stopped; - if (is_software_counter(counter)) - counter->pmu->enable(counter); + event->state = PERF_EVENT_STATE_ACTIVE; + event->oncpu = cpu; + event->tstamp_running += event->ctx->time - event->tstamp_stopped; + if (is_software_event(event)) + event->pmu->enable(event); } /* - * Called to enable a whole group of counters. + * Called to enable a whole group of events. * Returns 1 if the group was enabled, or -EAGAIN if it could not be. * Assumes the caller has disabled interrupts and has * frozen the PMU with hw_perf_save_disable. */ -int hw_perf_group_sched_in(struct perf_counter *group_leader, +int hw_perf_group_sched_in(struct perf_event *group_leader, struct perf_cpu_context *cpuctx, - struct perf_counter_context *ctx, int cpu) + struct perf_event_context *ctx, int cpu) { - struct cpu_hw_counters *cpuhw; + struct cpu_hw_events *cpuhw; long i, n, n0; - struct perf_counter *sub; + struct perf_event *sub; if (!ppmu) return 0; - cpuhw = &__get_cpu_var(cpu_hw_counters); - n0 = cpuhw->n_counters; + cpuhw = &__get_cpu_var(cpu_hw_events); + n0 = cpuhw->n_events; n = collect_events(group_leader, ppmu->n_counter - n0, - &cpuhw->counter[n0], &cpuhw->events[n0], + &cpuhw->event[n0], &cpuhw->events[n0], &cpuhw->flags[n0]); if (n < 0) return -EAGAIN; - if (check_excludes(cpuhw->counter, cpuhw->flags, n0, n)) + if (check_excludes(cpuhw->event, cpuhw->flags, n0, n)) return -EAGAIN; - i = power_check_constraints(cpuhw->events, cpuhw->flags, n + n0); + i = power_check_constraints(cpuhw, cpuhw->events, cpuhw->flags, n + n0); if (i < 0) return -EAGAIN; - cpuhw->n_counters = n0 + n; + cpuhw->n_events = n0 + n; cpuhw->n_added += n; /* - * OK, this group can go on; update counter states etc., - * and enable any software counters + * OK, this group can go on; update event states etc., + * and enable any software events */ for (i = n0; i < n0 + n; ++i) - cpuhw->counter[i]->hw.config = cpuhw->events[i]; + cpuhw->event[i]->hw.config = cpuhw->events[i]; cpuctx->active_oncpu += n; n = 1; - counter_sched_in(group_leader, cpu); - list_for_each_entry(sub, &group_leader->sibling_list, list_entry) { - if (sub->state != PERF_COUNTER_STATE_OFF) { - counter_sched_in(sub, cpu); + event_sched_in(group_leader, cpu); + list_for_each_entry(sub, &group_leader->sibling_list, group_entry) { + if (sub->state != PERF_EVENT_STATE_OFF) { + event_sched_in(sub, cpu); ++n; } } @@ -779,14 +776,14 @@ int hw_perf_group_sched_in(struct perf_counter *group_leader, } /* - * Add a counter to the PMU. - * If all counters are not already frozen, then we disable and + * Add a event to the PMU. + * If all events are not already frozen, then we disable and * re-enable the PMU in order to get hw_perf_enable to do the * actual work of reconfiguring the PMU. */ -static int power_pmu_enable(struct perf_counter *counter) +static int power_pmu_enable(struct perf_event *event) { - struct cpu_hw_counters *cpuhw; + struct cpu_hw_events *cpuhw; unsigned long flags; int n0; int ret = -EAGAIN; @@ -795,23 +792,23 @@ static int power_pmu_enable(struct perf_counter *counter) perf_disable(); /* - * Add the counter to the list (if there is room) + * Add the event to the list (if there is room) * and check whether the total set is still feasible. */ - cpuhw = &__get_cpu_var(cpu_hw_counters); - n0 = cpuhw->n_counters; + cpuhw = &__get_cpu_var(cpu_hw_events); + n0 = cpuhw->n_events; if (n0 >= ppmu->n_counter) goto out; - cpuhw->counter[n0] = counter; - cpuhw->events[n0] = counter->hw.config; - cpuhw->flags[n0] = counter->hw.counter_base; - if (check_excludes(cpuhw->counter, cpuhw->flags, n0, 1)) + cpuhw->event[n0] = event; + cpuhw->events[n0] = event->hw.config; + cpuhw->flags[n0] = event->hw.event_base; + if (check_excludes(cpuhw->event, cpuhw->flags, n0, 1)) goto out; - if (power_check_constraints(cpuhw->events, cpuhw->flags, n0 + 1)) + if (power_check_constraints(cpuhw, cpuhw->events, cpuhw->flags, n0 + 1)) goto out; - counter->hw.config = cpuhw->events[n0]; - ++cpuhw->n_counters; + event->hw.config = cpuhw->events[n0]; + ++cpuhw->n_events; ++cpuhw->n_added; ret = 0; @@ -822,36 +819,36 @@ static int power_pmu_enable(struct perf_counter *counter) } /* - * Remove a counter from the PMU. + * Remove a event from the PMU. */ -static void power_pmu_disable(struct perf_counter *counter) +static void power_pmu_disable(struct perf_event *event) { - struct cpu_hw_counters *cpuhw; + struct cpu_hw_events *cpuhw; long i; unsigned long flags; local_irq_save(flags); perf_disable(); - power_pmu_read(counter); - - cpuhw = &__get_cpu_var(cpu_hw_counters); - for (i = 0; i < cpuhw->n_counters; ++i) { - if (counter == cpuhw->counter[i]) { - while (++i < cpuhw->n_counters) - cpuhw->counter[i-1] = cpuhw->counter[i]; - --cpuhw->n_counters; - ppmu->disable_pmc(counter->hw.idx - 1, cpuhw->mmcr); - if (counter->hw.idx) { - write_pmc(counter->hw.idx, 0); - counter->hw.idx = 0; + power_pmu_read(event); + + cpuhw = &__get_cpu_var(cpu_hw_events); + for (i = 0; i < cpuhw->n_events; ++i) { + if (event == cpuhw->event[i]) { + while (++i < cpuhw->n_events) + cpuhw->event[i-1] = cpuhw->event[i]; + --cpuhw->n_events; + ppmu->disable_pmc(event->hw.idx - 1, cpuhw->mmcr); + if (event->hw.idx) { + write_pmc(event->hw.idx, 0); + event->hw.idx = 0; } - perf_counter_update_userpage(counter); + perf_event_update_userpage(event); break; } } for (i = 0; i < cpuhw->n_limited; ++i) - if (counter == cpuhw->limited_counter[i]) + if (event == cpuhw->limited_counter[i]) break; if (i < cpuhw->n_limited) { while (++i < cpuhw->n_limited) { @@ -860,8 +857,8 @@ static void power_pmu_disable(struct perf_counter *counter) } --cpuhw->n_limited; } - if (cpuhw->n_counters == 0) { - /* disable exceptions if no counters are running */ + if (cpuhw->n_events == 0) { + /* disable exceptions if no events are running */ cpuhw->mmcr[0] &= ~(MMCR0_PMXE | MMCR0_FCECE); } @@ -870,28 +867,28 @@ static void power_pmu_disable(struct perf_counter *counter) } /* - * Re-enable interrupts on a counter after they were throttled + * Re-enable interrupts on a event after they were throttled * because they were coming too fast. */ -static void power_pmu_unthrottle(struct perf_counter *counter) +static void power_pmu_unthrottle(struct perf_event *event) { s64 val, left; unsigned long flags; - if (!counter->hw.idx || !counter->hw.sample_period) + if (!event->hw.idx || !event->hw.sample_period) return; local_irq_save(flags); perf_disable(); - power_pmu_read(counter); - left = counter->hw.sample_period; - counter->hw.last_period = left; + power_pmu_read(event); + left = event->hw.sample_period; + event->hw.last_period = left; val = 0; if (left < 0x80000000L) val = 0x80000000L - left; - write_pmc(counter->hw.idx, val); - atomic64_set(&counter->hw.prev_count, val); - atomic64_set(&counter->hw.period_left, left); - perf_counter_update_userpage(counter); + write_pmc(event->hw.idx, val); + atomic64_set(&event->hw.prev_count, val); + atomic64_set(&event->hw.period_left, left); + perf_event_update_userpage(event); perf_enable(); local_irq_restore(flags); } @@ -904,29 +901,29 @@ struct pmu power_pmu = { }; /* - * Return 1 if we might be able to put counter on a limited PMC, + * Return 1 if we might be able to put event on a limited PMC, * or 0 if not. - * A counter can only go on a limited PMC if it counts something + * A event can only go on a limited PMC if it counts something * that a limited PMC can count, doesn't require interrupts, and * doesn't exclude any processor mode. */ -static int can_go_on_limited_pmc(struct perf_counter *counter, u64 ev, +static int can_go_on_limited_pmc(struct perf_event *event, u64 ev, unsigned int flags) { int n; u64 alt[MAX_EVENT_ALTERNATIVES]; - if (counter->attr.exclude_user - || counter->attr.exclude_kernel - || counter->attr.exclude_hv - || counter->attr.sample_period) + if (event->attr.exclude_user + || event->attr.exclude_kernel + || event->attr.exclude_hv + || event->attr.sample_period) return 0; if (ppmu->limited_pmc_event(ev)) return 1; /* - * The requested event isn't on a limited PMC already; + * The requested event_id isn't on a limited PMC already; * see if any alternative code goes on a limited PMC. */ if (!ppmu->get_alternatives) @@ -939,9 +936,9 @@ static int can_go_on_limited_pmc(struct perf_counter *counter, u64 ev, } /* - * Find an alternative event that goes on a normal PMC, if possible, - * and return the event code, or 0 if there is no such alternative. - * (Note: event code 0 is "don't count" on all machines.) + * Find an alternative event_id that goes on a normal PMC, if possible, + * and return the event_id code, or 0 if there is no such alternative. + * (Note: event_id code 0 is "don't count" on all machines.) */ static u64 normal_pmc_alternative(u64 ev, unsigned long flags) { @@ -955,26 +952,26 @@ static u64 normal_pmc_alternative(u64 ev, unsigned long flags) return alt[0]; } -/* Number of perf_counters counting hardware events */ -static atomic_t num_counters; +/* Number of perf_events counting hardware events */ +static atomic_t num_events; /* Used to avoid races in calling reserve/release_pmc_hardware */ static DEFINE_MUTEX(pmc_reserve_mutex); /* - * Release the PMU if this is the last perf_counter. + * Release the PMU if this is the last perf_event. */ -static void hw_perf_counter_destroy(struct perf_counter *counter) +static void hw_perf_event_destroy(struct perf_event *event) { - if (!atomic_add_unless(&num_counters, -1, 1)) { + if (!atomic_add_unless(&num_events, -1, 1)) { mutex_lock(&pmc_reserve_mutex); - if (atomic_dec_return(&num_counters) == 0) + if (atomic_dec_return(&num_events) == 0) release_pmc_hardware(); mutex_unlock(&pmc_reserve_mutex); } } /* - * Translate a generic cache event config to a raw event code. + * Translate a generic cache event_id config to a raw event_id code. */ static int hw_perf_cache_event(u64 config, u64 *eventp) { @@ -1003,38 +1000,39 @@ static int hw_perf_cache_event(u64 config, u64 *eventp) return 0; } -const struct pmu *hw_perf_counter_init(struct perf_counter *counter) +const struct pmu *hw_perf_event_init(struct perf_event *event) { u64 ev; unsigned long flags; - struct perf_counter *ctrs[MAX_HWCOUNTERS]; - u64 events[MAX_HWCOUNTERS]; - unsigned int cflags[MAX_HWCOUNTERS]; + struct perf_event *ctrs[MAX_HWEVENTS]; + u64 events[MAX_HWEVENTS]; + unsigned int cflags[MAX_HWEVENTS]; int n; int err; + struct cpu_hw_events *cpuhw; if (!ppmu) return ERR_PTR(-ENXIO); - switch (counter->attr.type) { + switch (event->attr.type) { case PERF_TYPE_HARDWARE: - ev = counter->attr.config; + ev = event->attr.config; if (ev >= ppmu->n_generic || ppmu->generic_events[ev] == 0) return ERR_PTR(-EOPNOTSUPP); ev = ppmu->generic_events[ev]; break; case PERF_TYPE_HW_CACHE: - err = hw_perf_cache_event(counter->attr.config, &ev); + err = hw_perf_cache_event(event->attr.config, &ev); if (err) return ERR_PTR(err); break; case PERF_TYPE_RAW: - ev = counter->attr.config; + ev = event->attr.config; break; default: return ERR_PTR(-EINVAL); } - counter->hw.config_base = ev; - counter->hw.idx = 0; + event->hw.config_base = ev; + event->hw.idx = 0; /* * If we are not running on a hypervisor, force the @@ -1042,28 +1040,28 @@ const struct pmu *hw_perf_counter_init(struct perf_counter *counter) * the user set it to. */ if (!firmware_has_feature(FW_FEATURE_LPAR)) - counter->attr.exclude_hv = 0; + event->attr.exclude_hv = 0; /* - * If this is a per-task counter, then we can use + * If this is a per-task event, then we can use * PM_RUN_* events interchangeably with their non RUN_* * equivalents, e.g. PM_RUN_CYC instead of PM_CYC. * XXX we should check if the task is an idle task. */ flags = 0; - if (counter->ctx->task) + if (event->ctx->task) flags |= PPMU_ONLY_COUNT_RUN; /* - * If this machine has limited counters, check whether this - * event could go on a limited counter. + * If this machine has limited events, check whether this + * event_id could go on a limited event. */ if (ppmu->flags & PPMU_LIMITED_PMC5_6) { - if (can_go_on_limited_pmc(counter, ev, flags)) { + if (can_go_on_limited_pmc(event, ev, flags)) { flags |= PPMU_LIMITED_PMC_OK; } else if (ppmu->limited_pmc_event(ev)) { /* - * The requested event is on a limited PMC, + * The requested event_id is on a limited PMC, * but we can't use a limited PMC; see if any * alternative goes on a normal PMC. */ @@ -1075,46 +1073,50 @@ const struct pmu *hw_perf_counter_init(struct perf_counter *counter) /* * If this is in a group, check if it can go on with all the - * other hardware counters in the group. We assume the counter + * other hardware events in the group. We assume the event * hasn't been linked into its leader's sibling list at this point. */ n = 0; - if (counter->group_leader != counter) { - n = collect_events(counter->group_leader, ppmu->n_counter - 1, + if (event->group_leader != event) { + n = collect_events(event->group_leader, ppmu->n_counter - 1, ctrs, events, cflags); if (n < 0) return ERR_PTR(-EINVAL); } events[n] = ev; - ctrs[n] = counter; + ctrs[n] = event; cflags[n] = flags; if (check_excludes(ctrs, cflags, n, 1)) return ERR_PTR(-EINVAL); - if (power_check_constraints(events, cflags, n + 1)) + + cpuhw = &get_cpu_var(cpu_hw_events); + err = power_check_constraints(cpuhw, events, cflags, n + 1); + put_cpu_var(cpu_hw_events); + if (err) return ERR_PTR(-EINVAL); - counter->hw.config = events[n]; - counter->hw.counter_base = cflags[n]; - counter->hw.last_period = counter->hw.sample_period; - atomic64_set(&counter->hw.period_left, counter->hw.last_period); + event->hw.config = events[n]; + event->hw.event_base = cflags[n]; + event->hw.last_period = event->hw.sample_period; + atomic64_set(&event->hw.period_left, event->hw.last_period); /* * See if we need to reserve the PMU. - * If no counters are currently in use, then we have to take a + * If no events are currently in use, then we have to take a * mutex to ensure that we don't race with another task doing * reserve_pmc_hardware or release_pmc_hardware. */ err = 0; - if (!atomic_inc_not_zero(&num_counters)) { + if (!atomic_inc_not_zero(&num_events)) { mutex_lock(&pmc_reserve_mutex); - if (atomic_read(&num_counters) == 0 && - reserve_pmc_hardware(perf_counter_interrupt)) + if (atomic_read(&num_events) == 0 && + reserve_pmc_hardware(perf_event_interrupt)) err = -EBUSY; else - atomic_inc(&num_counters); + atomic_inc(&num_events); mutex_unlock(&pmc_reserve_mutex); } - counter->destroy = hw_perf_counter_destroy; + event->destroy = hw_perf_event_destroy; if (err) return ERR_PTR(err); @@ -1126,24 +1128,24 @@ const struct pmu *hw_perf_counter_init(struct perf_counter *counter) * things if requested. Note that interrupts are hard-disabled * here so there is no possibility of being interrupted. */ -static void record_and_restart(struct perf_counter *counter, unsigned long val, +static void record_and_restart(struct perf_event *event, unsigned long val, struct pt_regs *regs, int nmi) { - u64 period = counter->hw.sample_period; + u64 period = event->hw.sample_period; s64 prev, delta, left; int record = 0; /* we don't have to worry about interrupts here */ - prev = atomic64_read(&counter->hw.prev_count); + prev = atomic64_read(&event->hw.prev_count); delta = (val - prev) & 0xfffffffful; - atomic64_add(delta, &counter->count); + atomic64_add(delta, &event->count); /* - * See if the total period for this counter has expired, + * See if the total period for this event has expired, * and update for the next period. */ val = 0; - left = atomic64_read(&counter->hw.period_left) - delta; + left = atomic64_read(&event->hw.period_left) - delta; if (period) { if (left <= 0) { left += period; @@ -1160,20 +1162,19 @@ static void record_and_restart(struct perf_counter *counter, unsigned long val, */ if (record) { struct perf_sample_data data = { - .regs = regs, .addr = 0, - .period = counter->hw.last_period, + .period = event->hw.last_period, }; - if (counter->attr.sample_type & PERF_SAMPLE_ADDR) + if (event->attr.sample_type & PERF_SAMPLE_ADDR) perf_get_data_addr(regs, &data.addr); - if (perf_counter_overflow(counter, nmi, &data)) { + if (perf_event_overflow(event, nmi, &data, regs)) { /* * Interrupts are coming too fast - throttle them - * by setting the counter to 0, so it will be + * by setting the event to 0, so it will be * at least 2^30 cycles until the next interrupt - * (assuming each counter counts at most 2 counts + * (assuming each event counts at most 2 counts * per cycle). */ val = 0; @@ -1181,15 +1182,15 @@ static void record_and_restart(struct perf_counter *counter, unsigned long val, } } - write_pmc(counter->hw.idx, val); - atomic64_set(&counter->hw.prev_count, val); - atomic64_set(&counter->hw.period_left, left); - perf_counter_update_userpage(counter); + write_pmc(event->hw.idx, val); + atomic64_set(&event->hw.prev_count, val); + atomic64_set(&event->hw.period_left, left); + perf_event_update_userpage(event); } /* * Called from generic code to get the misc flags (i.e. processor mode) - * for an event. + * for an event_id. */ unsigned long perf_misc_flags(struct pt_regs *regs) { @@ -1197,13 +1198,13 @@ unsigned long perf_misc_flags(struct pt_regs *regs) if (flags) return flags; - return user_mode(regs) ? PERF_EVENT_MISC_USER : - PERF_EVENT_MISC_KERNEL; + return user_mode(regs) ? PERF_RECORD_MISC_USER : + PERF_RECORD_MISC_KERNEL; } /* * Called from generic code to get the instruction pointer - * for an event. + * for an event_id. */ unsigned long perf_instruction_pointer(struct pt_regs *regs) { @@ -1219,11 +1220,11 @@ unsigned long perf_instruction_pointer(struct pt_regs *regs) /* * Performance monitor interrupt stuff */ -static void perf_counter_interrupt(struct pt_regs *regs) +static void perf_event_interrupt(struct pt_regs *regs) { int i; - struct cpu_hw_counters *cpuhw = &__get_cpu_var(cpu_hw_counters); - struct perf_counter *counter; + struct cpu_hw_events *cpuhw = &__get_cpu_var(cpu_hw_events); + struct perf_event *event; unsigned long val; int found = 0; int nmi; @@ -1240,21 +1241,21 @@ static void perf_counter_interrupt(struct pt_regs *regs) else irq_enter(); - for (i = 0; i < cpuhw->n_counters; ++i) { - counter = cpuhw->counter[i]; - if (!counter->hw.idx || is_limited_pmc(counter->hw.idx)) + for (i = 0; i < cpuhw->n_events; ++i) { + event = cpuhw->event[i]; + if (!event->hw.idx || is_limited_pmc(event->hw.idx)) continue; - val = read_pmc(counter->hw.idx); + val = read_pmc(event->hw.idx); if ((int)val < 0) { - /* counter has overflowed */ + /* event has overflowed */ found = 1; - record_and_restart(counter, val, regs, nmi); + record_and_restart(event, val, regs, nmi); } } /* - * In case we didn't find and reset the counter that caused - * the interrupt, scan all counters and reset any that are + * In case we didn't find and reset the event that caused + * the interrupt, scan all events and reset any that are * negative, to avoid getting continual interrupts. * Any that we processed in the previous loop will not be negative. */ @@ -1272,7 +1273,7 @@ static void perf_counter_interrupt(struct pt_regs *regs) * Reset MMCR0 to its normal value. This will set PMXE and * clear FC (freeze counters) and PMAO (perf mon alert occurred) * and thus allow interrupts to occur again. - * XXX might want to use MSR.PM to keep the counters frozen until + * XXX might want to use MSR.PM to keep the events frozen until * we get back out of this interrupt. */ write_mmcr0(cpuhw, cpuhw->mmcr[0]); @@ -1283,9 +1284,9 @@ static void perf_counter_interrupt(struct pt_regs *regs) irq_exit(); } -void hw_perf_counter_setup(int cpu) +void hw_perf_event_setup(int cpu) { - struct cpu_hw_counters *cpuhw = &per_cpu(cpu_hw_counters, cpu); + struct cpu_hw_events *cpuhw = &per_cpu(cpu_hw_events, cpu); if (!ppmu) return; @@ -1307,7 +1308,7 @@ int register_power_pmu(struct power_pmu *pmu) * Use FCHV to ignore kernel events if MSR.HV is set. */ if (mfmsr() & MSR_HV) - freeze_counters_kernel = MMCR0_FCHV; + freeze_events_kernel = MMCR0_FCHV; #endif /* CONFIG_PPC64 */ return 0; diff --git a/arch/powerpc/kernel/power4-pmu.c b/arch/powerpc/kernel/power4-pmu.c index 3c90a3d9173e..2a361cdda635 100644 --- a/arch/powerpc/kernel/power4-pmu.c +++ b/arch/powerpc/kernel/power4-pmu.c @@ -9,7 +9,7 @@ * 2 of the License, or (at your option) any later version. */ #include <linux/kernel.h> -#include <linux/perf_counter.h> +#include <linux/perf_event.h> #include <linux/string.h> #include <asm/reg.h> #include <asm/cputable.h> diff --git a/arch/powerpc/kernel/power5+-pmu.c b/arch/powerpc/kernel/power5+-pmu.c index 31918af3e355..0f4c1c73a6ad 100644 --- a/arch/powerpc/kernel/power5+-pmu.c +++ b/arch/powerpc/kernel/power5+-pmu.c @@ -9,7 +9,7 @@ * 2 of the License, or (at your option) any later version. */ #include <linux/kernel.h> -#include <linux/perf_counter.h> +#include <linux/perf_event.h> #include <linux/string.h> #include <asm/reg.h> #include <asm/cputable.h> diff --git a/arch/powerpc/kernel/power5-pmu.c b/arch/powerpc/kernel/power5-pmu.c index 867f6f663963..c351b3a57fbb 100644 --- a/arch/powerpc/kernel/power5-pmu.c +++ b/arch/powerpc/kernel/power5-pmu.c @@ -9,7 +9,7 @@ * 2 of the License, or (at your option) any later version. */ #include <linux/kernel.h> -#include <linux/perf_counter.h> +#include <linux/perf_event.h> #include <linux/string.h> #include <asm/reg.h> #include <asm/cputable.h> diff --git a/arch/powerpc/kernel/power6-pmu.c b/arch/powerpc/kernel/power6-pmu.c index fa21890531da..ca399ba5034c 100644 --- a/arch/powerpc/kernel/power6-pmu.c +++ b/arch/powerpc/kernel/power6-pmu.c @@ -9,7 +9,7 @@ * 2 of the License, or (at your option) any later version. */ #include <linux/kernel.h> -#include <linux/perf_counter.h> +#include <linux/perf_event.h> #include <linux/string.h> #include <asm/reg.h> #include <asm/cputable.h> diff --git a/arch/powerpc/kernel/power7-pmu.c b/arch/powerpc/kernel/power7-pmu.c index 388cf57ad827..28a4daacdc02 100644 --- a/arch/powerpc/kernel/power7-pmu.c +++ b/arch/powerpc/kernel/power7-pmu.c @@ -9,7 +9,7 @@ * 2 of the License, or (at your option) any later version. */ #include <linux/kernel.h> -#include <linux/perf_counter.h> +#include <linux/perf_event.h> #include <linux/string.h> #include <asm/reg.h> #include <asm/cputable.h> @@ -317,7 +317,7 @@ static int power7_generic_events[] = { */ static int power7_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = { [C(L1D)] = { /* RESULT_ACCESS RESULT_MISS */ - [C(OP_READ)] = { 0x400f0, 0xc880 }, + [C(OP_READ)] = { 0xc880, 0x400f0 }, [C(OP_WRITE)] = { 0, 0x300f0 }, [C(OP_PREFETCH)] = { 0xd8b8, 0 }, }, @@ -327,8 +327,8 @@ static int power7_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = { [C(OP_PREFETCH)] = { 0x408a, 0 }, }, [C(LL)] = { /* RESULT_ACCESS RESULT_MISS */ - [C(OP_READ)] = { 0x6080, 0x6084 }, - [C(OP_WRITE)] = { 0x6082, 0x6086 }, + [C(OP_READ)] = { 0x16080, 0x26080 }, + [C(OP_WRITE)] = { 0x16082, 0x26082 }, [C(OP_PREFETCH)] = { 0, 0 }, }, [C(DTLB)] = { /* RESULT_ACCESS RESULT_MISS */ diff --git a/arch/powerpc/kernel/ppc970-pmu.c b/arch/powerpc/kernel/ppc970-pmu.c index 75dccb71a043..479574413a93 100644 --- a/arch/powerpc/kernel/ppc970-pmu.c +++ b/arch/powerpc/kernel/ppc970-pmu.c @@ -9,7 +9,7 @@ * 2 of the License, or (at your option) any later version. */ #include <linux/string.h> -#include <linux/perf_counter.h> +#include <linux/perf_event.h> #include <asm/reg.h> #include <asm/cputable.h> diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 892a9f2e6d76..0a3216433051 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -284,14 +284,13 @@ int set_dabr(unsigned long dabr) return ppc_md.set_dabr(dabr); /* XXX should we have a CPU_FTR_HAS_DABR ? */ -#if defined(CONFIG_PPC64) || defined(CONFIG_6xx) - mtspr(SPRN_DABR, dabr); -#endif - #if defined(CONFIG_BOOKE) mtspr(SPRN_DAC1, dabr); +#elif defined(CONFIG_PPC_BOOK3S) + mtspr(SPRN_DABR, dabr); #endif + return 0; } @@ -372,15 +371,16 @@ struct task_struct *__switch_to(struct task_struct *prev, #endif /* CONFIG_SMP */ - if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr)) - set_dabr(new->thread.dabr); - #if defined(CONFIG_BOOKE) /* If new thread DAC (HW breakpoint) is the same then leave it */ if (new->thread.dabr) set_dabr(new->thread.dabr); +#else + if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr)) + set_dabr(new->thread.dabr); #endif + new_thread = &new->thread; old_thread = ¤t->thread; @@ -664,6 +664,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, sp_vsid |= SLB_VSID_KERNEL | llp; p->thread.ksp_vsid = sp_vsid; } +#endif /* CONFIG_PPC_STD_MMU_64 */ /* * The PPC64 ABI makes use of a TOC to contain function @@ -671,6 +672,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, * to the TOC entry. The first entry is a pointer to the actual * function. */ +#ifdef CONFIG_PPC64 kregs->nip = *((unsigned long *)ret_from_fork); #else kregs->nip = (unsigned long)ret_from_fork; diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index a538824616fd..864334b337a3 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -190,6 +190,8 @@ static int __initdata of_platform; static char __initdata prom_cmd_line[COMMAND_LINE_SIZE]; +static unsigned long __initdata prom_memory_limit; + static unsigned long __initdata alloc_top; static unsigned long __initdata alloc_top_high; static unsigned long __initdata alloc_bottom; @@ -484,6 +486,67 @@ static int __init prom_setprop(phandle node, const char *nodename, return call_prom("interpret", 1, 1, (u32)(unsigned long) cmd); } +/* We can't use the standard versions because of RELOC headaches. */ +#define isxdigit(c) (('0' <= (c) && (c) <= '9') \ + || ('a' <= (c) && (c) <= 'f') \ + || ('A' <= (c) && (c) <= 'F')) + +#define isdigit(c) ('0' <= (c) && (c) <= '9') +#define islower(c) ('a' <= (c) && (c) <= 'z') +#define toupper(c) (islower(c) ? ((c) - 'a' + 'A') : (c)) + +unsigned long prom_strtoul(const char *cp, const char **endp) +{ + unsigned long result = 0, base = 10, value; + + if (*cp == '0') { + base = 8; + cp++; + if (toupper(*cp) == 'X') { + cp++; + base = 16; + } + } + + while (isxdigit(*cp) && + (value = isdigit(*cp) ? *cp - '0' : toupper(*cp) - 'A' + 10) < base) { + result = result * base + value; + cp++; + } + + if (endp) + *endp = cp; + + return result; +} + +unsigned long prom_memparse(const char *ptr, const char **retptr) +{ + unsigned long ret = prom_strtoul(ptr, retptr); + int shift = 0; + + /* + * We can't use a switch here because GCC *may* generate a + * jump table which won't work, because we're not running at + * the address we're linked at. + */ + if ('G' == **retptr || 'g' == **retptr) + shift = 30; + + if ('M' == **retptr || 'm' == **retptr) + shift = 20; + + if ('K' == **retptr || 'k' == **retptr) + shift = 10; + + if (shift) { + ret <<= shift; + (*retptr)++; + } + + return ret; +} + /* * Early parsing of the command line passed to the kernel, used for * "mem=x" and the options that affect the iommu @@ -491,9 +554,8 @@ static int __init prom_setprop(phandle node, const char *nodename, static void __init early_cmdline_parse(void) { struct prom_t *_prom = &RELOC(prom); -#ifdef CONFIG_PPC64 const char *opt; -#endif + char *p; int l = 0; @@ -521,6 +583,15 @@ static void __init early_cmdline_parse(void) RELOC(prom_iommu_force_on) = 1; } #endif + opt = strstr(RELOC(prom_cmd_line), RELOC("mem=")); + if (opt) { + opt += 4; + RELOC(prom_memory_limit) = prom_memparse(opt, (const char **)&opt); +#ifdef CONFIG_PPC64 + /* Align to 16 MB == size of ppc64 large page */ + RELOC(prom_memory_limit) = ALIGN(RELOC(prom_memory_limit), 0x1000000); +#endif + } } #ifdef CONFIG_PPC_PSERIES @@ -1027,6 +1098,29 @@ static void __init prom_init_mem(void) } /* + * If prom_memory_limit is set we reduce the upper limits *except* for + * alloc_top_high. This must be the real top of RAM so we can put + * TCE's up there. + */ + + RELOC(alloc_top_high) = RELOC(ram_top); + + if (RELOC(prom_memory_limit)) { + if (RELOC(prom_memory_limit) <= RELOC(alloc_bottom)) { + prom_printf("Ignoring mem=%x <= alloc_bottom.\n", + RELOC(prom_memory_limit)); + RELOC(prom_memory_limit) = 0; + } else if (RELOC(prom_memory_limit) >= RELOC(ram_top)) { + prom_printf("Ignoring mem=%x >= ram_top.\n", + RELOC(prom_memory_limit)); + RELOC(prom_memory_limit) = 0; + } else { + RELOC(ram_top) = RELOC(prom_memory_limit); + RELOC(rmo_top) = min(RELOC(rmo_top), RELOC(prom_memory_limit)); + } + } + + /* * Setup our top alloc point, that is top of RMO or top of * segment 0 when running non-LPAR. * Some RS64 machines have buggy firmware where claims up at @@ -1041,6 +1135,7 @@ static void __init prom_init_mem(void) RELOC(alloc_top_high) = RELOC(ram_top); prom_printf("memory layout at init:\n"); + prom_printf(" memory_limit : %x (16 MB aligned)\n", RELOC(prom_memory_limit)); prom_printf(" alloc_bottom : %x\n", RELOC(alloc_bottom)); prom_printf(" alloc_top : %x\n", RELOC(alloc_top)); prom_printf(" alloc_top_hi : %x\n", RELOC(alloc_top_high)); @@ -1259,10 +1354,6 @@ static void __init prom_initialize_tce_table(void) * * -- Cort */ -extern char __secondary_hold; -extern unsigned long __secondary_hold_spinloop; -extern unsigned long __secondary_hold_acknowledge; - /* * We want to reference the copy of __secondary_hold_* in the * 0 - 0x100 address range @@ -2399,6 +2490,10 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, /* * Fill in some infos for use by the kernel later on */ + if (RELOC(prom_memory_limit)) + prom_setprop(_prom->chosen, "/chosen", "linux,memory-limit", + &RELOC(prom_memory_limit), + sizeof(prom_memory_limit)); #ifdef CONFIG_PPC64 if (RELOC(prom_iommu_off)) prom_setprop(_prom->chosen, "/chosen", "linux,iommu-off", diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index c434823b8c83..bf90361bb70f 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -39,6 +39,7 @@ #include <asm/smp.h> #include <asm/atomic.h> #include <asm/time.h> +#include <asm/mmu.h> struct rtas_t rtas = { .lock = __RAW_SPIN_LOCK_UNLOCKED @@ -713,6 +714,7 @@ static void rtas_percpu_suspend_me(void *info) { long rc = H_SUCCESS; unsigned long msr_save; + u16 slb_size = mmu_slb_size; int cpu; struct rtas_suspend_me_data *data = (struct rtas_suspend_me_data *)info; @@ -735,13 +737,16 @@ static void rtas_percpu_suspend_me(void *info) /* All other cpus are in H_JOIN, this cpu does * the suspend. */ + slb_set_size(SLB_MIN_SIZE); printk(KERN_DEBUG "calling ibm,suspend-me on cpu %i\n", smp_processor_id()); data->error = rtas_call(data->token, 0, 1, NULL); - if (data->error) + if (data->error) { printk(KERN_DEBUG "ibm,suspend-me returned %d\n", data->error); + slb_set_size(slb_size); + } } else { printk(KERN_ERR "H_JOIN on cpu %i failed with rc = %ld\n", smp_processor_id(), rc); diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index 02fed27af7f6..1d5570a1e456 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -328,7 +328,7 @@ static void c_stop(struct seq_file *m, void *v) { } -struct seq_operations cpuinfo_op = { +const struct seq_operations cpuinfo_op = { .start =c_start, .next = c_next, .stop = c_stop, diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index e1e3059cf34b..53bcf3d792db 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -210,6 +210,14 @@ void nvram_write_byte(unsigned char val, int addr) } EXPORT_SYMBOL(nvram_write_byte); +ssize_t nvram_get_size(void) +{ + if (ppc_md.nvram_size) + return ppc_md.nvram_size(); + return -1; +} +EXPORT_SYMBOL(nvram_get_size); + void nvram_sync(void) { if (ppc_md.nvram_sync) diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 1f6816003ebe..797ea95aae2e 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -57,11 +57,13 @@ #include <asm/cache.h> #include <asm/page.h> #include <asm/mmu.h> +#include <asm/mmu-hash64.h> #include <asm/firmware.h> #include <asm/xmon.h> #include <asm/udbg.h> #include <asm/kexec.h> #include <asm/swiotlb.h> +#include <asm/mmu_context.h> #include "setup.h" @@ -142,11 +144,14 @@ early_param("smt-enabled", early_smt_enabled); #define check_smt_enabled() #endif /* CONFIG_SMP */ -/* Put the paca pointer into r13 and SPRG3 */ +/* Put the paca pointer into r13 and SPRG_PACA */ void __init setup_paca(int cpu) { local_paca = &paca[cpu]; - mtspr(SPRN_SPRG3, local_paca); + mtspr(SPRN_SPRG_PACA, local_paca); +#ifdef CONFIG_PPC_BOOK3E + mtspr(SPRN_SPRG_TLB_EXFRAME, local_paca->extlb); +#endif } /* @@ -230,9 +235,6 @@ void early_setup_secondary(void) #endif /* CONFIG_SMP */ #if defined(CONFIG_SMP) || defined(CONFIG_KEXEC) -extern unsigned long __secondary_hold_spinloop; -extern void generic_secondary_smp_init(void); - void smp_release_cpus(void) { unsigned long *ptr; @@ -453,6 +455,24 @@ static void __init irqstack_early_init(void) #define irqstack_early_init() #endif +#ifdef CONFIG_PPC_BOOK3E +static void __init exc_lvl_early_init(void) +{ + unsigned int i; + + for_each_possible_cpu(i) { + critirq_ctx[i] = (struct thread_info *) + __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE)); + dbgirq_ctx[i] = (struct thread_info *) + __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE)); + mcheckirq_ctx[i] = (struct thread_info *) + __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE)); + } +} +#else +#define exc_lvl_early_init() +#endif + /* * Stack space used when we detect a bad kernel stack pointer, and * early in SMP boots before relocation is enabled. @@ -512,6 +532,7 @@ void __init setup_arch(char **cmdline_p) init_mm.brk = klimit; irqstack_early_init(); + exc_lvl_early_init(); emergency_stack_init(); #ifdef CONFIG_PPC_STD_MMU_64 @@ -534,6 +555,10 @@ void __init setup_arch(char **cmdline_p) #endif paging_init(); + + /* Initialize the MMU context management stuff */ + mmu_context_init(); + ppc64_boot_msg(0x15, "Setup Done"); } @@ -569,25 +594,53 @@ void cpu_die(void) } #ifdef CONFIG_SMP -void __init setup_per_cpu_areas(void) +#define PCPU_DYN_SIZE () + +static void * __init pcpu_fc_alloc(unsigned int cpu, size_t size, size_t align) { - int i; - unsigned long size; - char *ptr; - - /* Copy section for each CPU (we discard the original) */ - size = ALIGN(__per_cpu_end - __per_cpu_start, PAGE_SIZE); -#ifdef CONFIG_MODULES - if (size < PERCPU_ENOUGH_ROOM) - size = PERCPU_ENOUGH_ROOM; -#endif + return __alloc_bootmem_node(NODE_DATA(cpu_to_node(cpu)), size, align, + __pa(MAX_DMA_ADDRESS)); +} - for_each_possible_cpu(i) { - ptr = alloc_bootmem_pages_node(NODE_DATA(cpu_to_node(i)), size); +static void __init pcpu_fc_free(void *ptr, size_t size) +{ + free_bootmem(__pa(ptr), size); +} - paca[i].data_offset = ptr - __per_cpu_start; - memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start); - } +static int pcpu_cpu_distance(unsigned int from, unsigned int to) +{ + if (cpu_to_node(from) == cpu_to_node(to)) + return LOCAL_DISTANCE; + else + return REMOTE_DISTANCE; +} + +void __init setup_per_cpu_areas(void) +{ + const size_t dyn_size = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE; + size_t atom_size; + unsigned long delta; + unsigned int cpu; + int rc; + + /* + * Linear mapping is one of 4K, 1M and 16M. For 4K, no need + * to group units. For larger mappings, use 1M atom which + * should be large enough to contain a number of units. + */ + if (mmu_linear_psize == MMU_PAGE_4K) + atom_size = PAGE_SIZE; + else + atom_size = 1 << 20; + + rc = pcpu_embed_first_chunk(0, dyn_size, atom_size, pcpu_cpu_distance, + pcpu_fc_alloc, pcpu_fc_free); + if (rc < 0) + panic("cannot initialize percpu area (err=%d)", rc); + + delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start; + for_each_possible_cpu(cpu) + paca[cpu].data_offset = delta + pcpu_unit_offsets[cpu]; } #endif diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 0b47de07302d..d387b3937ccc 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -269,7 +269,10 @@ void __init smp_prepare_cpus(unsigned int max_cpus) cpu_callin_map[boot_cpuid] = 1; if (smp_ops) - max_cpus = smp_ops->probe(); + if (smp_ops->probe) + max_cpus = smp_ops->probe(); + else + max_cpus = NR_CPUS; else max_cpus = 1; @@ -412,9 +415,8 @@ int __cpuinit __cpu_up(unsigned int cpu) * CPUs can take much longer to come up in the * hotplug case. Wait five seconds. */ - for (c = 25; c && !cpu_callin_map[cpu]; c--) { - msleep(200); - } + for (c = 5000; c && !cpu_callin_map[cpu]; c--) + msleep(1); #endif if (!cpu_callin_map[cpu]) { @@ -494,7 +496,8 @@ int __devinit start_secondary(void *unused) preempt_disable(); cpu_callin_map[cpu] = 1; - smp_ops->setup_cpu(cpu); + if (smp_ops->setup_cpu) + smp_ops->setup_cpu(cpu); if (smp_ops->take_timebase) smp_ops->take_timebase(); @@ -557,7 +560,7 @@ void __init smp_cpus_done(unsigned int max_cpus) old_mask = current->cpus_allowed; set_cpus_allowed(current, cpumask_of_cpu(boot_cpuid)); - if (smp_ops) + if (smp_ops && smp_ops->setup_cpu) smp_ops->setup_cpu(boot_cpuid); set_cpus_allowed(current, old_mask); diff --git a/arch/powerpc/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c index bb1cfcfdbbbb..1cc5e9e5da96 100644 --- a/arch/powerpc/kernel/sys_ppc32.c +++ b/arch/powerpc/kernel/sys_ppc32.c @@ -343,6 +343,18 @@ off_t ppc32_lseek(unsigned int fd, u32 offset, unsigned int origin) return sys_lseek(fd, (int)offset, origin); } +long compat_sys_truncate(const char __user * path, u32 length) +{ + /* sign extend length */ + return sys_truncate(path, (int)length); +} + +long compat_sys_ftruncate(int fd, u32 length) +{ + /* sign extend length */ + return sys_ftruncate(fd, (int)length); +} + /* Note: it is necessary to treat bufsiz as an unsigned int, * with the corresponding cast to a signed int to insure that the * proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode) diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index f41aec85aa49..956ab33fd73f 100644 --- a/arch/powerpc/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -17,6 +17,7 @@ #include <asm/prom.h> #include <asm/machdep.h> #include <asm/smp.h> +#include <asm/pmc.h> #include "cacheinfo.h" @@ -123,6 +124,8 @@ static DEFINE_PER_CPU(char, pmcs_enabled); void ppc_enable_pmcs(void) { + ppc_set_pmu_inuse(1); + /* Only need to enable them once */ if (__get_cpu_var(pmcs_enabled)) return; diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 5b1657540a7d..92dc844299b6 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -53,7 +53,7 @@ #include <linux/posix-timers.h> #include <linux/irq.h> #include <linux/delay.h> -#include <linux/perf_counter.h> +#include <linux/perf_event.h> #include <asm/io.h> #include <asm/processor.h> @@ -481,7 +481,8 @@ static int __init iSeries_tb_recal(void) unsigned long tb_ticks = tb - iSeries_recal_tb; unsigned long titan_usec = (titan - iSeries_recal_titan) >> 12; unsigned long new_tb_ticks_per_sec = (tb_ticks * USEC_PER_SEC)/titan_usec; - unsigned long new_tb_ticks_per_jiffy = (new_tb_ticks_per_sec+(HZ/2))/HZ; + unsigned long new_tb_ticks_per_jiffy = + DIV_ROUND_CLOSEST(new_tb_ticks_per_sec, HZ); long tick_diff = new_tb_ticks_per_jiffy - tb_ticks_per_jiffy; char sign = '+'; /* make sure tb_ticks_per_sec and tb_ticks_per_jiffy are consistent */ @@ -529,25 +530,25 @@ void __init iSeries_time_init_early(void) } #endif /* CONFIG_PPC_ISERIES */ -#if defined(CONFIG_PERF_COUNTERS) && defined(CONFIG_PPC32) -DEFINE_PER_CPU(u8, perf_counter_pending); +#if defined(CONFIG_PERF_EVENTS) && defined(CONFIG_PPC32) +DEFINE_PER_CPU(u8, perf_event_pending); -void set_perf_counter_pending(void) +void set_perf_event_pending(void) { - get_cpu_var(perf_counter_pending) = 1; + get_cpu_var(perf_event_pending) = 1; set_dec(1); - put_cpu_var(perf_counter_pending); + put_cpu_var(perf_event_pending); } -#define test_perf_counter_pending() __get_cpu_var(perf_counter_pending) -#define clear_perf_counter_pending() __get_cpu_var(perf_counter_pending) = 0 +#define test_perf_event_pending() __get_cpu_var(perf_event_pending) +#define clear_perf_event_pending() __get_cpu_var(perf_event_pending) = 0 -#else /* CONFIG_PERF_COUNTERS && CONFIG_PPC32 */ +#else /* CONFIG_PERF_EVENTS && CONFIG_PPC32 */ -#define test_perf_counter_pending() 0 -#define clear_perf_counter_pending() +#define test_perf_event_pending() 0 +#define clear_perf_event_pending() -#endif /* CONFIG_PERF_COUNTERS && CONFIG_PPC32 */ +#endif /* CONFIG_PERF_EVENTS && CONFIG_PPC32 */ /* * For iSeries shared processors, we have to let the hypervisor @@ -575,9 +576,9 @@ void timer_interrupt(struct pt_regs * regs) set_dec(DECREMENTER_MAX); #ifdef CONFIG_PPC32 - if (test_perf_counter_pending()) { - clear_perf_counter_pending(); - perf_counter_do_pending(); + if (test_perf_event_pending()) { + clear_perf_event_pending(); + perf_event_do_pending(); } if (atomic_read(&ppc_n_lost_interrupts) != 0) do_IRQ(regs); @@ -729,6 +730,18 @@ static int __init get_freq(char *name, int cells, unsigned long *val) return found; } +/* should become __cpuinit when secondary_cpu_time_init also is */ +void start_cpu_decrementer(void) +{ +#if defined(CONFIG_BOOKE) || defined(CONFIG_40x) + /* Clear any pending timer interrupts */ + mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS); + + /* Enable decrementer interrupt */ + mtspr(SPRN_TCR, TCR_DIE); +#endif /* defined(CONFIG_BOOKE) || defined(CONFIG_40x) */ +} + void __init generic_calibrate_decr(void) { ppc_tb_freq = DEFAULT_TB_FREQ; /* hardcoded default */ @@ -748,14 +761,6 @@ void __init generic_calibrate_decr(void) printk(KERN_ERR "WARNING: Estimating processor frequency " "(not found)\n"); } - -#if defined(CONFIG_BOOKE) || defined(CONFIG_40x) - /* Clear any pending timer interrupts */ - mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS); - - /* Enable decrementer interrupt */ - mtspr(SPRN_TCR, TCR_DIE); -#endif } int update_persistent_clock(struct timespec now) @@ -921,6 +926,11 @@ static void __init init_decrementer_clockevent(void) void secondary_cpu_time_init(void) { + /* Start the decrementer on CPUs that have manual control + * such as BookE + */ + start_cpu_decrementer(); + /* FIME: Should make unrelatred change to move snapshot_timebase * call here ! */ register_decrementer_clockevent(smp_processor_id()); @@ -1025,6 +1035,11 @@ void __init time_init(void) write_sequnlock_irqrestore(&xtime_lock, flags); + /* Start the decrementer on CPUs that have manual control + * such as BookE + */ + start_cpu_decrementer(); + /* Register the clocksource, if we're not running on iSeries */ if (!firmware_has_feature(FW_FEATURE_ISERIES)) clocksource_init(); diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c index acb74a17bbbf..b4b167b33643 100644 --- a/arch/powerpc/kernel/udbg_16550.c +++ b/arch/powerpc/kernel/udbg_16550.c @@ -1,5 +1,5 @@ /* - * udbg for for NS16550 compatable serial ports + * udbg for NS16550 compatable serial ports * * Copyright (C) 2001-2005 PPC 64 Team, IBM Corp * diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c index ad06d5c75b15..a0abce251d0a 100644 --- a/arch/powerpc/kernel/vdso.c +++ b/arch/powerpc/kernel/vdso.c @@ -203,7 +203,12 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp) } else { vdso_pagelist = vdso64_pagelist; vdso_pages = vdso64_pages; - vdso_base = VDSO64_MBASE; + /* + * On 64bit we don't have a preferred map address. This + * allows get_unmapped_area to find an area near other mmaps + * and most likely share a SLB entry. + */ + vdso_base = 0; } #else vdso_pagelist = vdso32_pagelist; diff --git a/arch/powerpc/kernel/vdso32/Makefile b/arch/powerpc/kernel/vdso32/Makefile index c3d57bd01a88..b54b81688132 100644 --- a/arch/powerpc/kernel/vdso32/Makefile +++ b/arch/powerpc/kernel/vdso32/Makefile @@ -12,6 +12,7 @@ endif targets := $(obj-vdso32) vdso32.so vdso32.so.dbg obj-vdso32 := $(addprefix $(obj)/, $(obj-vdso32)) +GCOV_PROFILE := n EXTRA_CFLAGS := -shared -fno-common -fno-builtin EXTRA_CFLAGS += -nostdlib -Wl,-soname=linux-vdso32.so.1 \ diff --git a/arch/powerpc/kernel/vdso64/Makefile b/arch/powerpc/kernel/vdso64/Makefile index fa7f1b8f3e50..dd0c8e936775 100644 --- a/arch/powerpc/kernel/vdso64/Makefile +++ b/arch/powerpc/kernel/vdso64/Makefile @@ -7,6 +7,8 @@ obj-vdso64 = sigtramp.o gettimeofday.o datapage.o cacheflush.o note.o targets := $(obj-vdso64) vdso64.so vdso64.so.dbg obj-vdso64 := $(addprefix $(obj)/, $(obj-vdso64)) +GCOV_PROFILE := n + EXTRA_CFLAGS := -shared -fno-common -fno-builtin EXTRA_CFLAGS += -nostdlib -Wl,-soname=linux-vdso64.so.1 \ $(call ld-option, -Wl$(comma)--hash-style=sysv) diff --git a/arch/powerpc/kernel/vector.S b/arch/powerpc/kernel/vector.S index ea4d64644d02..67b6916f0e94 100644 --- a/arch/powerpc/kernel/vector.S +++ b/arch/powerpc/kernel/vector.S @@ -65,7 +65,7 @@ _GLOBAL(load_up_altivec) 1: /* enable use of VMX after return */ #ifdef CONFIG_PPC32 - mfspr r5,SPRN_SPRG3 /* current task's THREAD (phys) */ + mfspr r5,SPRN_SPRG_THREAD /* current task's THREAD (phys) */ oris r9,r9,MSR_VEC@h #else ld r4,PACACURRENT(r13) diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c index 819e59f6f7c7..bc7b41edbdfc 100644 --- a/arch/powerpc/kernel/vio.c +++ b/arch/powerpc/kernel/vio.c @@ -601,7 +601,7 @@ static void vio_dma_iommu_unmap_sg(struct device *dev, vio_cmo_dealloc(viodev, alloc_size); } -struct dma_mapping_ops vio_dma_mapping_ops = { +struct dma_map_ops vio_dma_mapping_ops = { .alloc_coherent = vio_dma_iommu_alloc_coherent, .free_coherent = vio_dma_iommu_free_coherent, .map_sg = vio_dma_iommu_map_sg, diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index 8ef8a14abc95..58da4070723d 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -37,12 +37,6 @@ jiffies = jiffies_64 + 4; #endif SECTIONS { - /* Sections to be discarded. */ - /DISCARD/ : { - *(.exitcall.exit) - EXIT_DATA - } - . = KERNELBASE; /* @@ -245,10 +239,6 @@ SECTIONS } #endif - . = ALIGN(PAGE_SIZE); - _edata = .; - PROVIDE32 (edata = .); - /* The initial task and kernel stack */ #ifdef CONFIG_PPC32 . = ALIGN(8192); @@ -282,6 +272,10 @@ SECTIONS __nosave_end = .; } + . = ALIGN(PAGE_SIZE); + _edata = .; + PROVIDE32 (edata = .); + /* * And finally the bss */ @@ -298,4 +292,7 @@ SECTIONS . = ALIGN(PAGE_SIZE); _end = . ; PROVIDE32 (end = .); + + /* Sections to be discarded. */ + DISCARDS } diff --git a/arch/powerpc/kvm/44x.c b/arch/powerpc/kvm/44x.c index 0cef809cec21..f4d1b55aa70b 100644 --- a/arch/powerpc/kvm/44x.c +++ b/arch/powerpc/kvm/44x.c @@ -138,7 +138,7 @@ void kvmppc_core_vcpu_free(struct kvm_vcpu *vcpu) kmem_cache_free(kvm_vcpu_cache, vcpu_44x); } -static int kvmppc_44x_init(void) +static int __init kvmppc_44x_init(void) { int r; @@ -149,7 +149,7 @@ static int kvmppc_44x_init(void) return kvm_init(NULL, sizeof(struct kvmppc_vcpu_44x), THIS_MODULE); } -static void kvmppc_44x_exit(void) +static void __exit kvmppc_44x_exit(void) { kvmppc_booke_exit(); } diff --git a/arch/powerpc/kvm/44x_tlb.c b/arch/powerpc/kvm/44x_tlb.c index 4a16f472cc18..ff3cb63b8117 100644 --- a/arch/powerpc/kvm/44x_tlb.c +++ b/arch/powerpc/kvm/44x_tlb.c @@ -30,6 +30,7 @@ #include "timing.h" #include "44x_tlb.h" +#include "trace.h" #ifndef PPC44x_TLBE_SIZE #define PPC44x_TLBE_SIZE PPC44x_TLB_4K @@ -263,7 +264,7 @@ static void kvmppc_44x_shadow_release(struct kvmppc_vcpu_44x *vcpu_44x, /* XXX set tlb_44x_index to stlb_index? */ - KVMTRACE_1D(STLB_INVAL, &vcpu_44x->vcpu, stlb_index, handler); + trace_kvm_stlb_inval(stlb_index); } void kvmppc_mmu_destroy(struct kvm_vcpu *vcpu) @@ -365,8 +366,8 @@ void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gpa_t gpaddr, /* Insert shadow mapping into hardware TLB. */ kvmppc_44x_tlbe_set_modified(vcpu_44x, victim); kvmppc_44x_tlbwe(victim, &stlbe); - KVMTRACE_5D(STLB_WRITE, vcpu, victim, stlbe.tid, stlbe.word0, stlbe.word1, - stlbe.word2, handler); + trace_kvm_stlb_write(victim, stlbe.tid, stlbe.word0, stlbe.word1, + stlbe.word2); } /* For a particular guest TLB entry, invalidate the corresponding host TLB @@ -485,8 +486,8 @@ int kvmppc_44x_emul_tlbwe(struct kvm_vcpu *vcpu, u8 ra, u8 rs, u8 ws) kvmppc_mmu_map(vcpu, eaddr, gpaddr, gtlb_index); } - KVMTRACE_5D(GTLB_WRITE, vcpu, gtlb_index, tlbe->tid, tlbe->word0, - tlbe->word1, tlbe->word2, handler); + trace_kvm_gtlb_write(gtlb_index, tlbe->tid, tlbe->word0, tlbe->word1, + tlbe->word2); kvmppc_set_exit_type(vcpu, EMULATED_TLBWE_EXITS); return EMULATE_DONE; diff --git a/arch/powerpc/kvm/Kconfig b/arch/powerpc/kvm/Kconfig index 5a152a52796f..c29926846613 100644 --- a/arch/powerpc/kvm/Kconfig +++ b/arch/powerpc/kvm/Kconfig @@ -2,8 +2,7 @@ # KVM configuration # -config HAVE_KVM_IRQCHIP - bool +source "virt/kvm/Kconfig" menuconfig VIRTUALIZATION bool "Virtualization" @@ -59,17 +58,6 @@ config KVM_E500 If unsure, say N. -config KVM_TRACE - bool "KVM trace support" - depends on KVM && MARKERS && SYSFS - select RELAY - select DEBUG_FS - default n - ---help--- - This option allows reading a trace of kvm-related events through - relayfs. Note the ABI is not considered stable and will be - modified in future updates. - source drivers/virtio/Kconfig endif # VIRTUALIZATION diff --git a/arch/powerpc/kvm/Makefile b/arch/powerpc/kvm/Makefile index 459c7ee580f7..37655fe19f2f 100644 --- a/arch/powerpc/kvm/Makefile +++ b/arch/powerpc/kvm/Makefile @@ -8,7 +8,9 @@ EXTRA_CFLAGS += -Ivirt/kvm -Iarch/powerpc/kvm common-objs-y = $(addprefix ../../../virt/kvm/, kvm_main.o coalesced_mmio.o) -common-objs-$(CONFIG_KVM_TRACE) += $(addprefix ../../../virt/kvm/, kvm_trace.o) +CFLAGS_44x_tlb.o := -I. +CFLAGS_e500_tlb.o := -I. +CFLAGS_emulate.o := -I. kvm-objs := $(common-objs-y) powerpc.o emulate.o obj-$(CONFIG_KVM_EXIT_TIMING) += timing.o diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c index 642e4204cf25..e7bf4d029484 100644 --- a/arch/powerpc/kvm/booke.c +++ b/arch/powerpc/kvm/booke.c @@ -520,7 +520,7 @@ int kvm_arch_vcpu_ioctl_translate(struct kvm_vcpu *vcpu, return kvmppc_core_vcpu_translate(vcpu, tr); } -int kvmppc_booke_init(void) +int __init kvmppc_booke_init(void) { unsigned long ivor[16]; unsigned long max_ivor = 0; diff --git a/arch/powerpc/kvm/booke_interrupts.S b/arch/powerpc/kvm/booke_interrupts.S index d0c6f841bbd1..380a78cf484d 100644 --- a/arch/powerpc/kvm/booke_interrupts.S +++ b/arch/powerpc/kvm/booke_interrupts.S @@ -56,8 +56,8 @@ .macro KVM_HANDLER ivor_nr _GLOBAL(kvmppc_handler_\ivor_nr) /* Get pointer to vcpu and record exit number. */ - mtspr SPRN_SPRG0, r4 - mfspr r4, SPRN_SPRG1 + mtspr SPRN_SPRG_WSCRATCH0, r4 + mfspr r4, SPRN_SPRG_RVCPU stw r5, VCPU_GPR(r5)(r4) stw r6, VCPU_GPR(r6)(r4) mfctr r5 @@ -95,7 +95,7 @@ _GLOBAL(kvmppc_handler_len) /* Registers: - * SPRG0: guest r4 + * SPRG_SCRATCH0: guest r4 * r4: vcpu pointer * r5: KVM exit number */ @@ -181,7 +181,7 @@ _GLOBAL(kvmppc_resume_host) stw r3, VCPU_LR(r4) mfxer r3 stw r3, VCPU_XER(r4) - mfspr r3, SPRN_SPRG0 + mfspr r3, SPRN_SPRG_RSCRATCH0 stw r3, VCPU_GPR(r4)(r4) mfspr r3, SPRN_SRR0 stw r3, VCPU_PC(r4) @@ -374,7 +374,7 @@ lightweight_exit: mtspr SPRN_IVPR, r8 /* Save vcpu pointer for the exception handlers. */ - mtspr SPRN_SPRG1, r4 + mtspr SPRN_SPRG_WVCPU, r4 /* Can't switch the stack pointer until after IVPR is switched, * because host interrupt handlers would get confused. */ @@ -384,13 +384,13 @@ lightweight_exit: /* Host interrupt handlers may have clobbered these guest-readable * SPRGs, so we need to reload them here with the guest's values. */ lwz r3, VCPU_SPRG4(r4) - mtspr SPRN_SPRG4, r3 + mtspr SPRN_SPRG4W, r3 lwz r3, VCPU_SPRG5(r4) - mtspr SPRN_SPRG5, r3 + mtspr SPRN_SPRG5W, r3 lwz r3, VCPU_SPRG6(r4) - mtspr SPRN_SPRG6, r3 + mtspr SPRN_SPRG6W, r3 lwz r3, VCPU_SPRG7(r4) - mtspr SPRN_SPRG7, r3 + mtspr SPRN_SPRG7W, r3 #ifdef CONFIG_KVM_EXIT_TIMING /* save enter time */ diff --git a/arch/powerpc/kvm/e500.c b/arch/powerpc/kvm/e500.c index d8067fd81cdd..64949eef43f1 100644 --- a/arch/powerpc/kvm/e500.c +++ b/arch/powerpc/kvm/e500.c @@ -60,9 +60,6 @@ int kvmppc_core_vcpu_setup(struct kvm_vcpu *vcpu) kvmppc_e500_tlb_setup(vcpu_e500); - /* Use the same core vertion as host's */ - vcpu->arch.pvr = mfspr(SPRN_PVR); - return 0; } @@ -132,7 +129,7 @@ void kvmppc_core_vcpu_free(struct kvm_vcpu *vcpu) kmem_cache_free(kvm_vcpu_cache, vcpu_e500); } -static int kvmppc_e500_init(void) +static int __init kvmppc_e500_init(void) { int r, i; unsigned long ivor[3]; @@ -160,7 +157,7 @@ static int kvmppc_e500_init(void) return kvm_init(NULL, sizeof(struct kvmppc_vcpu_e500), THIS_MODULE); } -static void kvmppc_e500_exit(void) +static void __init kvmppc_e500_exit(void) { kvmppc_booke_exit(); } diff --git a/arch/powerpc/kvm/e500_emulate.c b/arch/powerpc/kvm/e500_emulate.c index 3f760414b9f8..be95b8d8e3b7 100644 --- a/arch/powerpc/kvm/e500_emulate.c +++ b/arch/powerpc/kvm/e500_emulate.c @@ -180,6 +180,9 @@ int kvmppc_core_emulate_mfspr(struct kvm_vcpu *vcpu, int sprn, int rt) case SPRN_MMUCSR0: vcpu->arch.gpr[rt] = 0; break; + case SPRN_MMUCFG: + vcpu->arch.gpr[rt] = mfspr(SPRN_MMUCFG); break; + /* extra exceptions */ case SPRN_IVOR32: vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_SPE_UNAVAIL]; diff --git a/arch/powerpc/kvm/e500_tlb.c b/arch/powerpc/kvm/e500_tlb.c index 0e773fc2d5e4..fb1e1dc11ba5 100644 --- a/arch/powerpc/kvm/e500_tlb.c +++ b/arch/powerpc/kvm/e500_tlb.c @@ -22,6 +22,7 @@ #include "../mm/mmu_decl.h" #include "e500_tlb.h" +#include "trace.h" #define to_htlb1_esel(esel) (tlb1_entry_num - (esel) - 1) @@ -224,9 +225,8 @@ static void kvmppc_e500_stlbe_invalidate(struct kvmppc_vcpu_e500 *vcpu_e500, kvmppc_e500_shadow_release(vcpu_e500, tlbsel, esel); stlbe->mas1 = 0; - KVMTRACE_5D(STLB_INVAL, &vcpu_e500->vcpu, index_of(tlbsel, esel), - stlbe->mas1, stlbe->mas2, stlbe->mas3, stlbe->mas7, - handler); + trace_kvm_stlb_inval(index_of(tlbsel, esel), stlbe->mas1, stlbe->mas2, + stlbe->mas3, stlbe->mas7); } static void kvmppc_e500_tlb1_invalidate(struct kvmppc_vcpu_e500 *vcpu_e500, @@ -269,7 +269,7 @@ static inline void kvmppc_e500_deliver_tlb_miss(struct kvm_vcpu *vcpu, tlbsel = (vcpu_e500->mas4 >> 28) & 0x1; victim = (tlbsel == 0) ? tlb0_get_next_victim(vcpu_e500) : 0; pidsel = (vcpu_e500->mas4 >> 16) & 0xf; - tsized = (vcpu_e500->mas4 >> 8) & 0xf; + tsized = (vcpu_e500->mas4 >> 7) & 0x1f; vcpu_e500->mas0 = MAS0_TLBSEL(tlbsel) | MAS0_ESEL(victim) | MAS0_NV(vcpu_e500->guest_tlb_nv[tlbsel]); @@ -309,7 +309,7 @@ static inline void kvmppc_e500_shadow_map(struct kvmppc_vcpu_e500 *vcpu_e500, vcpu_e500->shadow_pages[tlbsel][esel] = new_page; /* Force TS=1 IPROT=0 TSIZE=4KB for all guest mappings. */ - stlbe->mas1 = MAS1_TSIZE(BOOKE_PAGESZ_4K) + stlbe->mas1 = MAS1_TSIZE(BOOK3E_PAGESZ_4K) | MAS1_TID(get_tlb_tid(gtlbe)) | MAS1_TS | MAS1_VALID; stlbe->mas2 = (gvaddr & MAS2_EPN) | e500_shadow_mas2_attrib(gtlbe->mas2, @@ -319,9 +319,8 @@ static inline void kvmppc_e500_shadow_map(struct kvmppc_vcpu_e500 *vcpu_e500, vcpu_e500->vcpu.arch.msr & MSR_PR); stlbe->mas7 = (hpaddr >> 32) & MAS7_RPN; - KVMTRACE_5D(STLB_WRITE, &vcpu_e500->vcpu, index_of(tlbsel, esel), - stlbe->mas1, stlbe->mas2, stlbe->mas3, stlbe->mas7, - handler); + trace_kvm_stlb_write(index_of(tlbsel, esel), stlbe->mas1, stlbe->mas2, + stlbe->mas3, stlbe->mas7); } /* XXX only map the one-one case, for now use TLB0 */ @@ -535,9 +534,8 @@ int kvmppc_e500_emul_tlbwe(struct kvm_vcpu *vcpu) gtlbe->mas3 = vcpu_e500->mas3; gtlbe->mas7 = vcpu_e500->mas7; - KVMTRACE_5D(GTLB_WRITE, vcpu, vcpu_e500->mas0, - gtlbe->mas1, gtlbe->mas2, gtlbe->mas3, gtlbe->mas7, - handler); + trace_kvm_gtlb_write(vcpu_e500->mas0, gtlbe->mas1, gtlbe->mas2, + gtlbe->mas3, gtlbe->mas7); /* Invalidate shadow mappings for the about-to-be-clobbered TLBE. */ if (tlbe_is_host_safe(vcpu, gtlbe)) { @@ -545,7 +543,7 @@ int kvmppc_e500_emul_tlbwe(struct kvm_vcpu *vcpu) case 0: /* TLB0 */ gtlbe->mas1 &= ~MAS1_TSIZE(~0); - gtlbe->mas1 |= MAS1_TSIZE(BOOKE_PAGESZ_4K); + gtlbe->mas1 |= MAS1_TSIZE(BOOK3E_PAGESZ_4K); stlbsel = 0; sesel = kvmppc_e500_stlbe_map(vcpu_e500, 0, esel); @@ -679,14 +677,14 @@ void kvmppc_e500_tlb_setup(struct kvmppc_vcpu_e500 *vcpu_e500) /* Insert large initial mapping for guest. */ tlbe = &vcpu_e500->guest_tlb[1][0]; - tlbe->mas1 = MAS1_VALID | MAS1_TSIZE(BOOKE_PAGESZ_256M); + tlbe->mas1 = MAS1_VALID | MAS1_TSIZE(BOOK3E_PAGESZ_256M); tlbe->mas2 = 0; tlbe->mas3 = E500_TLB_SUPER_PERM_MASK; tlbe->mas7 = 0; /* 4K map for serial output. Used by kernel wrapper. */ tlbe = &vcpu_e500->guest_tlb[1][1]; - tlbe->mas1 = MAS1_VALID | MAS1_TSIZE(BOOKE_PAGESZ_4K); + tlbe->mas1 = MAS1_VALID | MAS1_TSIZE(BOOK3E_PAGESZ_4K); tlbe->mas2 = (0xe0004500 & 0xFFFFF000) | MAS2_I | MAS2_G; tlbe->mas3 = (0xe0004500 & 0xFFFFF000) | E500_TLB_SUPER_PERM_MASK; tlbe->mas7 = 0; diff --git a/arch/powerpc/kvm/e500_tlb.h b/arch/powerpc/kvm/e500_tlb.h index 45b064b76906..d28e3010a5e2 100644 --- a/arch/powerpc/kvm/e500_tlb.h +++ b/arch/powerpc/kvm/e500_tlb.h @@ -16,7 +16,7 @@ #define __KVM_E500_TLB_H__ #include <linux/kvm_host.h> -#include <asm/mmu-fsl-booke.h> +#include <asm/mmu-book3e.h> #include <asm/tlb.h> #include <asm/kvm_e500.h> @@ -59,7 +59,7 @@ extern void kvmppc_e500_tlb_setup(struct kvmppc_vcpu_e500 *); /* TLB helper functions */ static inline unsigned int get_tlb_size(const struct tlbe *tlbe) { - return (tlbe->mas1 >> 8) & 0xf; + return (tlbe->mas1 >> 7) & 0x1f; } static inline gva_t get_tlb_eaddr(const struct tlbe *tlbe) @@ -70,7 +70,7 @@ static inline gva_t get_tlb_eaddr(const struct tlbe *tlbe) static inline u64 get_tlb_bytes(const struct tlbe *tlbe) { unsigned int pgsize = get_tlb_size(tlbe); - return 1ULL << 10 << (pgsize << 1); + return 1ULL << 10 << pgsize; } static inline gva_t get_tlb_end(const struct tlbe *tlbe) diff --git a/arch/powerpc/kvm/emulate.c b/arch/powerpc/kvm/emulate.c index a561d6e8da1c..7737146af3fb 100644 --- a/arch/powerpc/kvm/emulate.c +++ b/arch/powerpc/kvm/emulate.c @@ -29,6 +29,7 @@ #include <asm/kvm_ppc.h> #include <asm/disassemble.h> #include "timing.h" +#include "trace.h" #define OP_TRAP 3 @@ -187,7 +188,9 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu) case SPRN_SRR1: vcpu->arch.gpr[rt] = vcpu->arch.srr1; break; case SPRN_PVR: - vcpu->arch.gpr[rt] = vcpu->arch.pvr; break; + vcpu->arch.gpr[rt] = mfspr(SPRN_PVR); break; + case SPRN_PIR: + vcpu->arch.gpr[rt] = mfspr(SPRN_PIR); break; /* Note: mftb and TBRL/TBWL are user-accessible, so * the guest can always access the real TB anyways. @@ -417,7 +420,7 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu) } } - KVMTRACE_3D(PPC_INSTR, vcpu, inst, (int)vcpu->arch.pc, emulated, entryexit); + trace_kvm_ppc_instr(inst, vcpu->arch.pc, emulated); if (advance) vcpu->arch.pc += 4; /* Advance past emulated instruction. */ diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c index 2cf915e51e7e..2a4551f78f60 100644 --- a/arch/powerpc/kvm/powerpc.c +++ b/arch/powerpc/kvm/powerpc.c @@ -31,25 +31,17 @@ #include "timing.h" #include "../mm/mmu_decl.h" +#define CREATE_TRACE_POINTS +#include "trace.h" + gfn_t unalias_gfn(struct kvm *kvm, gfn_t gfn) { return gfn; } -int kvm_cpu_has_interrupt(struct kvm_vcpu *v) -{ - return !!(v->arch.pending_exceptions); -} - -int kvm_arch_interrupt_allowed(struct kvm_vcpu *vcpu) -{ - /* do real check here */ - return 1; -} - int kvm_arch_vcpu_runnable(struct kvm_vcpu *v) { - return !(v->arch.msr & MSR_WE); + return !(v->arch.msr & MSR_WE) || !!(v->arch.pending_exceptions); } @@ -122,13 +114,17 @@ struct kvm *kvm_arch_create_vm(void) static void kvmppc_free_vcpus(struct kvm *kvm) { unsigned int i; + struct kvm_vcpu *vcpu; - for (i = 0; i < KVM_MAX_VCPUS; ++i) { - if (kvm->vcpus[i]) { - kvm_arch_vcpu_free(kvm->vcpus[i]); - kvm->vcpus[i] = NULL; - } - } + kvm_for_each_vcpu(i, vcpu, kvm) + kvm_arch_vcpu_free(vcpu); + + mutex_lock(&kvm->lock); + for (i = 0; i < atomic_read(&kvm->online_vcpus); i++) + kvm->vcpus[i] = NULL; + + atomic_set(&kvm->online_vcpus, 0); + mutex_unlock(&kvm->lock); } void kvm_arch_sync_events(struct kvm *kvm) diff --git a/arch/powerpc/kvm/trace.h b/arch/powerpc/kvm/trace.h new file mode 100644 index 000000000000..67f219de0455 --- /dev/null +++ b/arch/powerpc/kvm/trace.h @@ -0,0 +1,104 @@ +#if !defined(_TRACE_KVM_H) || defined(TRACE_HEADER_MULTI_READ) +#define _TRACE_KVM_H + +#include <linux/tracepoint.h> + +#undef TRACE_SYSTEM +#define TRACE_SYSTEM kvm +#define TRACE_INCLUDE_PATH . +#define TRACE_INCLUDE_FILE trace + +/* + * Tracepoint for guest mode entry. + */ +TRACE_EVENT(kvm_ppc_instr, + TP_PROTO(unsigned int inst, unsigned long pc, unsigned int emulate), + TP_ARGS(inst, pc, emulate), + + TP_STRUCT__entry( + __field( unsigned int, inst ) + __field( unsigned long, pc ) + __field( unsigned int, emulate ) + ), + + TP_fast_assign( + __entry->inst = inst; + __entry->pc = pc; + __entry->emulate = emulate; + ), + + TP_printk("inst %u pc 0x%lx emulate %u\n", + __entry->inst, __entry->pc, __entry->emulate) +); + +TRACE_EVENT(kvm_stlb_inval, + TP_PROTO(unsigned int stlb_index), + TP_ARGS(stlb_index), + + TP_STRUCT__entry( + __field( unsigned int, stlb_index ) + ), + + TP_fast_assign( + __entry->stlb_index = stlb_index; + ), + + TP_printk("stlb_index %u", __entry->stlb_index) +); + +TRACE_EVENT(kvm_stlb_write, + TP_PROTO(unsigned int victim, unsigned int tid, unsigned int word0, + unsigned int word1, unsigned int word2), + TP_ARGS(victim, tid, word0, word1, word2), + + TP_STRUCT__entry( + __field( unsigned int, victim ) + __field( unsigned int, tid ) + __field( unsigned int, word0 ) + __field( unsigned int, word1 ) + __field( unsigned int, word2 ) + ), + + TP_fast_assign( + __entry->victim = victim; + __entry->tid = tid; + __entry->word0 = word0; + __entry->word1 = word1; + __entry->word2 = word2; + ), + + TP_printk("victim %u tid %u w0 %u w1 %u w2 %u", + __entry->victim, __entry->tid, __entry->word0, + __entry->word1, __entry->word2) +); + +TRACE_EVENT(kvm_gtlb_write, + TP_PROTO(unsigned int gtlb_index, unsigned int tid, unsigned int word0, + unsigned int word1, unsigned int word2), + TP_ARGS(gtlb_index, tid, word0, word1, word2), + + TP_STRUCT__entry( + __field( unsigned int, gtlb_index ) + __field( unsigned int, tid ) + __field( unsigned int, word0 ) + __field( unsigned int, word1 ) + __field( unsigned int, word2 ) + ), + + TP_fast_assign( + __entry->gtlb_index = gtlb_index; + __entry->tid = tid; + __entry->word0 = word0; + __entry->word1 = word1; + __entry->word2 = word2; + ), + + TP_printk("gtlb_index %u tid %u w0 %u w1 %u w2 %u", + __entry->gtlb_index, __entry->tid, __entry->word0, + __entry->word1, __entry->word2) +); + +#endif /* _TRACE_KVM_H */ + +/* This part must be outside protection */ +#include <trace/define_trace.h> diff --git a/arch/powerpc/mm/40x_mmu.c b/arch/powerpc/mm/40x_mmu.c index 29954dc28942..f5e7b9ce63dd 100644 --- a/arch/powerpc/mm/40x_mmu.c +++ b/arch/powerpc/mm/40x_mmu.c @@ -105,7 +105,7 @@ unsigned long __init mmu_mapin_ram(void) while (s >= LARGE_PAGE_SIZE_16M) { pmd_t *pmdp; - unsigned long val = p | _PMD_SIZE_16M | _PAGE_HWEXEC | _PAGE_HWWRITE; + unsigned long val = p | _PMD_SIZE_16M | _PAGE_EXEC | _PAGE_HWWRITE; pmdp = pmd_offset(pud_offset(pgd_offset_k(v), v), v); pmd_val(*pmdp++) = val; @@ -120,7 +120,7 @@ unsigned long __init mmu_mapin_ram(void) while (s >= LARGE_PAGE_SIZE_4M) { pmd_t *pmdp; - unsigned long val = p | _PMD_SIZE_4M | _PAGE_HWEXEC | _PAGE_HWWRITE; + unsigned long val = p | _PMD_SIZE_4M | _PAGE_EXEC | _PAGE_HWWRITE; pmdp = pmd_offset(pud_offset(pgd_offset_k(v), v), v); pmd_val(*pmdp) = val; diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile index 3e68363405b7..6fb8fc8d2fea 100644 --- a/arch/powerpc/mm/Makefile +++ b/arch/powerpc/mm/Makefile @@ -13,6 +13,7 @@ obj-y := fault.o mem.o pgtable.o gup.o \ pgtable_$(CONFIG_WORD_SIZE).o obj-$(CONFIG_PPC_MMU_NOHASH) += mmu_context_nohash.o tlb_nohash.o \ tlb_nohash_low.o +obj-$(CONFIG_PPC_BOOK3E) += tlb_low_$(CONFIG_WORD_SIZE)e.o obj-$(CONFIG_PPC64) += mmap_64.o hash64-$(CONFIG_PPC_NATIVE) := hash_native_64.o obj-$(CONFIG_PPC_STD_MMU_64) += hash_utils_64.o \ diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c index 830bef0a1131..e7dae82c1285 100644 --- a/arch/powerpc/mm/fault.c +++ b/arch/powerpc/mm/fault.c @@ -29,7 +29,7 @@ #include <linux/module.h> #include <linux/kprobes.h> #include <linux/kdebug.h> -#include <linux/perf_counter.h> +#include <linux/perf_event.h> #include <asm/firmware.h> #include <asm/page.h> @@ -171,7 +171,7 @@ int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address, die("Weird page fault", regs, SIGSEGV); } - perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address); + perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address); /* When running in the kernel we expect faults to occur only to * addresses in user space. All other faults represent errors in the @@ -312,7 +312,7 @@ good_area: } if (ret & VM_FAULT_MAJOR) { current->maj_flt++; - perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0, + perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0, regs, address); #ifdef CONFIG_PPC_SMLPAR if (firmware_has_feature(FW_FEATURE_CMO)) { @@ -323,7 +323,7 @@ good_area: #endif } else { current->min_flt++; - perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0, + perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0, regs, address); } up_read(&mm->mmap_sem); diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c index bb3d65998e6b..dc93e95b256e 100644 --- a/arch/powerpc/mm/fsl_booke_mmu.c +++ b/arch/powerpc/mm/fsl_booke_mmu.c @@ -161,7 +161,7 @@ unsigned long __init mmu_mapin_ram(void) unsigned long virt = PAGE_OFFSET; phys_addr_t phys = memstart_addr; - while (cam[tlbcam_index] && tlbcam_index < ARRAY_SIZE(cam)) { + while (tlbcam_index < ARRAY_SIZE(cam) && cam[tlbcam_index]) { settlbcam(tlbcam_index, virt, phys, cam[tlbcam_index], PAGE_KERNEL_X, 0); virt += cam[tlbcam_index]; phys += cam[tlbcam_index]; diff --git a/arch/powerpc/mm/hash_low_32.S b/arch/powerpc/mm/hash_low_32.S index 14af8cedab70..b13d58932bf6 100644 --- a/arch/powerpc/mm/hash_low_32.S +++ b/arch/powerpc/mm/hash_low_32.S @@ -40,7 +40,7 @@ mmu_hash_lock: * The address is in r4, and r3 contains an access flag: * _PAGE_RW (0x400) if a write. * r9 contains the SRR1 value, from which we use the MSR_PR bit. - * SPRG3 contains the physical address of the current task's thread. + * SPRG_THREAD contains the physical address of the current task's thread. * * Returns to the caller if the access is illegal or there is no * mapping for the address. Otherwise it places an appropriate PTE @@ -68,7 +68,7 @@ _GLOBAL(hash_page) /* Get PTE (linux-style) and check access */ lis r0,KERNELBASE@h /* check if kernel address */ cmplw 0,r4,r0 - mfspr r8,SPRN_SPRG3 /* current task's THREAD (phys) */ + mfspr r8,SPRN_SPRG_THREAD /* current task's THREAD (phys) */ ori r3,r3,_PAGE_USER|_PAGE_PRESENT /* test low addresses as user */ lwz r5,PGDIR(r8) /* virt page-table root */ blt+ 112f /* assume user more likely */ diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index c46ef2ffa3d9..90df6ffe3a43 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -57,8 +57,10 @@ unsigned int mmu_huge_psizes[MMU_PAGE_COUNT] = { }; /* initialize all to 0 */ #define HUGEPTE_CACHE_NAME(psize) (huge_pgtable_cache_name[psize]) static const char *huge_pgtable_cache_name[MMU_PAGE_COUNT] = { - "unused_4K", "hugepte_cache_64K", "unused_64K_AP", - "hugepte_cache_1M", "hugepte_cache_16M", "hugepte_cache_16G" + [MMU_PAGE_64K] = "hugepte_cache_64K", + [MMU_PAGE_1M] = "hugepte_cache_1M", + [MMU_PAGE_16M] = "hugepte_cache_16M", + [MMU_PAGE_16G] = "hugepte_cache_16G", }; /* Flag to mark huge PD pointers. This means pmd_bad() and pud_bad() @@ -700,6 +702,8 @@ static void __init set_huge_psize(int psize) if (mmu_huge_psizes[psize] || mmu_psize_defs[psize].shift == PAGE_SHIFT) return; + if (WARN_ON(HUGEPTE_CACHE_NAME(psize) == NULL)) + return; hugetlb_add_hstate(mmu_psize_defs[psize].shift - PAGE_SHIFT); switch (mmu_psize_defs[psize].shift) { diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c index 3de6a0d93824..9ddcfb4dc139 100644 --- a/arch/powerpc/mm/init_32.c +++ b/arch/powerpc/mm/init_32.c @@ -54,8 +54,6 @@ #endif #define MAX_LOW_MEM CONFIG_LOWMEM_SIZE -DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); - phys_addr_t total_memory; phys_addr_t total_lowmem; @@ -244,39 +242,3 @@ void free_initrd_mem(unsigned long start, unsigned long end) } #endif -#ifdef CONFIG_PROC_KCORE -static struct kcore_list kcore_vmem; - -static int __init setup_kcore(void) -{ - int i; - - for (i = 0; i < lmb.memory.cnt; i++) { - unsigned long base; - unsigned long size; - struct kcore_list *kcore_mem; - - base = lmb.memory.region[i].base; - size = lmb.memory.region[i].size; - - kcore_mem = kmalloc(sizeof(struct kcore_list), GFP_ATOMIC); - if (!kcore_mem) - panic("%s: kmalloc failed\n", __func__); - - /* must stay under 32 bits */ - if ( 0xfffffffful - (unsigned long)__va(base) < size) { - size = 0xfffffffful - (unsigned long)(__va(base)); - printk(KERN_DEBUG "setup_kcore: restrict size=%lx\n", - size); - } - - kclist_add(kcore_mem, __va(base), size); - } - - kclist_add(&kcore_vmem, (void *)VMALLOC_START, - VMALLOC_END-VMALLOC_START); - - return 0; -} -module_init(setup_kcore); -#endif diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c index 68a821add28d..335c578b9cc3 100644 --- a/arch/powerpc/mm/init_64.c +++ b/arch/powerpc/mm/init_64.c @@ -109,35 +109,6 @@ void free_initrd_mem(unsigned long start, unsigned long end) } #endif -#ifdef CONFIG_PROC_KCORE -static struct kcore_list kcore_vmem; - -static int __init setup_kcore(void) -{ - int i; - - for (i=0; i < lmb.memory.cnt; i++) { - unsigned long base, size; - struct kcore_list *kcore_mem; - - base = lmb.memory.region[i].base; - size = lmb.memory.region[i].size; - - /* GFP_ATOMIC to avoid might_sleep warnings during boot */ - kcore_mem = kmalloc(sizeof(struct kcore_list), GFP_ATOMIC); - if (!kcore_mem) - panic("%s: kmalloc failed\n", __func__); - - kclist_add(kcore_mem, __va(base), size); - } - - kclist_add(&kcore_vmem, (void *)VMALLOC_START, VMALLOC_END-VMALLOC_START); - - return 0; -} -module_init(setup_kcore); -#endif - static void pgd_ctor(void *addr) { memset(addr, 0, PGD_TABLE_SIZE); @@ -205,6 +176,47 @@ static int __meminit vmemmap_populated(unsigned long start, int page_size) return 0; } +/* On hash-based CPUs, the vmemmap is bolted in the hash table. + * + * On Book3E CPUs, the vmemmap is currently mapped in the top half of + * the vmalloc space using normal page tables, though the size of + * pages encoded in the PTEs can be different + */ + +#ifdef CONFIG_PPC_BOOK3E +static void __meminit vmemmap_create_mapping(unsigned long start, + unsigned long page_size, + unsigned long phys) +{ + /* Create a PTE encoding without page size */ + unsigned long i, flags = _PAGE_PRESENT | _PAGE_ACCESSED | + _PAGE_KERNEL_RW; + + /* PTEs only contain page size encodings up to 32M */ + BUG_ON(mmu_psize_defs[mmu_vmemmap_psize].enc > 0xf); + + /* Encode the size in the PTE */ + flags |= mmu_psize_defs[mmu_vmemmap_psize].enc << 8; + + /* For each PTE for that area, map things. Note that we don't + * increment phys because all PTEs are of the large size and + * thus must have the low bits clear + */ + for (i = 0; i < page_size; i += PAGE_SIZE) + BUG_ON(map_kernel_page(start + i, phys, flags)); +} +#else /* CONFIG_PPC_BOOK3E */ +static void __meminit vmemmap_create_mapping(unsigned long start, + unsigned long page_size, + unsigned long phys) +{ + int mapped = htab_bolt_mapping(start, start + page_size, phys, + PAGE_KERNEL, mmu_vmemmap_psize, + mmu_kernel_ssize); + BUG_ON(mapped < 0); +} +#endif /* CONFIG_PPC_BOOK3E */ + int __meminit vmemmap_populate(struct page *start_page, unsigned long nr_pages, int node) { @@ -215,8 +227,11 @@ int __meminit vmemmap_populate(struct page *start_page, /* Align to the page size of the linear mapping. */ start = _ALIGN_DOWN(start, page_size); + pr_debug("vmemmap_populate page %p, %ld pages, node %d\n", + start_page, nr_pages, node); + pr_debug(" -> map %lx..%lx\n", start, end); + for (; start < end; start += page_size) { - int mapped; void *p; if (vmemmap_populated(start, page_size)) @@ -226,13 +241,10 @@ int __meminit vmemmap_populate(struct page *start_page, if (!p) return -ENOMEM; - pr_debug("vmemmap %08lx allocated at %p, physical %08lx.\n", - start, p, __pa(p)); + pr_debug(" * %016lx..%016lx allocated at %p\n", + start, start + page_size, p); - mapped = htab_bolt_mapping(start, start + page_size, __pa(p), - pgprot_val(PAGE_KERNEL), - mmu_vmemmap_psize, mmu_kernel_ssize); - BUG_ON(mapped < 0); + vmemmap_create_mapping(start, page_size, __pa(p)); } return 0; diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 579382c163a9..59736317bf0e 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -143,8 +143,8 @@ int arch_add_memory(int nid, u64 start, u64 size) * memory regions, find holes and callback for contiguous regions. */ int -walk_memory_resource(unsigned long start_pfn, unsigned long nr_pages, void *arg, - int (*func)(unsigned long, unsigned long, void *)) +walk_system_ram_range(unsigned long start_pfn, unsigned long nr_pages, + void *arg, int (*func)(unsigned long, unsigned long, void *)) { struct lmb_property res; unsigned long pfn, len; @@ -166,7 +166,7 @@ walk_memory_resource(unsigned long start_pfn, unsigned long nr_pages, void *arg, } return ret; } -EXPORT_SYMBOL_GPL(walk_memory_resource); +EXPORT_SYMBOL_GPL(walk_system_ram_range); /* * Initialize the bootmem system and give it all the memory we @@ -372,7 +372,7 @@ void __init mem_init(void) printk(KERN_INFO "Memory: %luk/%luk available (%luk kernel code, " "%luk reserved, %luk data, %luk bss, %luk init)\n", - (unsigned long)nr_free_pages() << (PAGE_SHIFT-10), + nr_free_pages() << (PAGE_SHIFT-10), num_physpages << (PAGE_SHIFT-10), codesize >> 10, reservedpages << (PAGE_SHIFT-10), diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c index b1a727def15b..c2f93dc470e6 100644 --- a/arch/powerpc/mm/mmu_context_nohash.c +++ b/arch/powerpc/mm/mmu_context_nohash.c @@ -25,10 +25,20 @@ * also clear mm->cpu_vm_mask bits when processes are migrated */ -#undef DEBUG -#define DEBUG_STEAL_ONLY -#undef DEBUG_MAP_CONSISTENCY -/*#define DEBUG_CLAMP_LAST_CONTEXT 15 */ +#define DEBUG_MAP_CONSISTENCY +#define DEBUG_CLAMP_LAST_CONTEXT 31 +//#define DEBUG_HARDER + +/* We don't use DEBUG because it tends to be compiled in always nowadays + * and this would generate way too much output + */ +#ifdef DEBUG_HARDER +#define pr_hard(args...) printk(KERN_DEBUG args) +#define pr_hardcont(args...) printk(KERN_CONT args) +#else +#define pr_hard(args...) do { } while(0) +#define pr_hardcont(args...) do { } while(0) +#endif #include <linux/kernel.h> #include <linux/mm.h> @@ -71,7 +81,7 @@ static DEFINE_SPINLOCK(context_lock); static unsigned int steal_context_smp(unsigned int id) { struct mm_struct *mm; - unsigned int cpu, max; + unsigned int cpu, max, i; max = last_context - first_context; @@ -89,15 +99,22 @@ static unsigned int steal_context_smp(unsigned int id) id = first_context; continue; } - pr_devel("[%d] steal context %d from mm @%p\n", - smp_processor_id(), id, mm); + pr_hardcont(" | steal %d from 0x%p", id, mm); /* Mark this mm has having no context anymore */ mm->context.id = MMU_NO_CONTEXT; - /* Mark it stale on all CPUs that used this mm */ - for_each_cpu(cpu, mm_cpumask(mm)) - __set_bit(id, stale_map[cpu]); + /* Mark it stale on all CPUs that used this mm. For threaded + * implementations, we set it on all threads on each core + * represented in the mask. A future implementation will use + * a core map instead but this will do for now. + */ + for_each_cpu(cpu, mm_cpumask(mm)) { + for (i = cpu_first_thread_in_core(cpu); + i <= cpu_last_thread_in_core(cpu); i++) + __set_bit(id, stale_map[i]); + cpu = i - 1; + } return id; } @@ -126,7 +143,7 @@ static unsigned int steal_context_up(unsigned int id) /* Pick up the victim mm */ mm = context_mm[id]; - pr_devel("[%d] steal context %d from mm @%p\n", cpu, id, mm); + pr_hardcont(" | steal %d from 0x%p", id, mm); /* Flush the TLB for that context */ local_flush_tlb_mm(mm); @@ -173,25 +190,20 @@ static void context_check_map(void) { } void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next) { - unsigned int id, cpu = smp_processor_id(); + unsigned int i, id, cpu = smp_processor_id(); unsigned long *map; /* No lockless fast path .. yet */ spin_lock(&context_lock); -#ifndef DEBUG_STEAL_ONLY - pr_devel("[%d] activating context for mm @%p, active=%d, id=%d\n", - cpu, next, next->context.active, next->context.id); -#endif + pr_hard("[%d] activating context for mm @%p, active=%d, id=%d", + cpu, next, next->context.active, next->context.id); #ifdef CONFIG_SMP /* Mark us active and the previous one not anymore */ next->context.active++; if (prev) { -#ifndef DEBUG_STEAL_ONLY - pr_devel(" old context %p active was: %d\n", - prev, prev->context.active); -#endif + pr_hardcont(" (old=0x%p a=%d)", prev, prev->context.active); WARN_ON(prev->context.active < 1); prev->context.active--; } @@ -201,8 +213,14 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next) /* If we already have a valid assigned context, skip all that */ id = next->context.id; - if (likely(id != MMU_NO_CONTEXT)) + if (likely(id != MMU_NO_CONTEXT)) { +#ifdef DEBUG_MAP_CONSISTENCY + if (context_mm[id] != next) + pr_err("MMU: mm 0x%p has id %d but context_mm[%d] says 0x%p\n", + next, id, id, context_mm[id]); +#endif goto ctxt_ok; + } /* We really don't have a context, let's try to acquire one */ id = next_context; @@ -235,11 +253,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next) next_context = id + 1; context_mm[id] = next; next->context.id = id; - -#ifndef DEBUG_STEAL_ONLY - pr_devel("[%d] picked up new id %d, nrf is now %d\n", - cpu, id, nr_free_contexts); -#endif + pr_hardcont(" | new id=%d,nrf=%d", id, nr_free_contexts); context_check_map(); ctxt_ok: @@ -248,15 +262,21 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next) * local TLB for it and unmark it before we use it */ if (test_bit(id, stale_map[cpu])) { - pr_devel("[%d] flushing stale context %d for mm @%p !\n", - cpu, id, next); + pr_hardcont(" | stale flush %d [%d..%d]", + id, cpu_first_thread_in_core(cpu), + cpu_last_thread_in_core(cpu)); + local_flush_tlb_mm(next); /* XXX This clear should ultimately be part of local_flush_tlb_mm */ - __clear_bit(id, stale_map[cpu]); + for (i = cpu_first_thread_in_core(cpu); + i <= cpu_last_thread_in_core(cpu); i++) { + __clear_bit(id, stale_map[i]); + } } /* Flick the MMU and release lock */ + pr_hardcont(" -> %d\n", id); set_context(id, next->pgd); spin_unlock(&context_lock); } @@ -266,6 +286,8 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next) */ int init_new_context(struct task_struct *t, struct mm_struct *mm) { + pr_hard("initing context for mm @%p\n", mm); + mm->context.id = MMU_NO_CONTEXT; mm->context.active = 0; @@ -305,7 +327,9 @@ static int __cpuinit mmu_context_cpu_notify(struct notifier_block *self, unsigned long action, void *hcpu) { unsigned int cpu = (unsigned int)(long)hcpu; - +#ifdef CONFIG_HOTPLUG_CPU + struct task_struct *p; +#endif /* We don't touch CPU 0 map, it's allocated at aboot and kept * around forever */ @@ -324,8 +348,16 @@ static int __cpuinit mmu_context_cpu_notify(struct notifier_block *self, pr_devel("MMU: Freeing stale context map for CPU %d\n", cpu); kfree(stale_map[cpu]); stale_map[cpu] = NULL; - break; -#endif + + /* We also clear the cpu_vm_mask bits of CPUs going away */ + read_lock(&tasklist_lock); + for_each_process(p) { + if (p->mm) + cpu_mask_clear_cpu(cpu, mm_cpumask(p->mm)); + } + read_unlock(&tasklist_lock); + break; +#endif /* CONFIG_HOTPLUG_CPU */ } return NOTIFY_OK; } diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h index d1f9c62dc177..d2e5321d5ea6 100644 --- a/arch/powerpc/mm/mmu_decl.h +++ b/arch/powerpc/mm/mmu_decl.h @@ -36,21 +36,37 @@ static inline void _tlbil_pid(unsigned int pid) { asm volatile ("sync; tlbia; isync" : : : "memory"); } +#define _tlbil_pid_noind(pid) _tlbil_pid(pid) + #else /* CONFIG_40x || CONFIG_8xx */ extern void _tlbil_all(void); extern void _tlbil_pid(unsigned int pid); +#ifdef CONFIG_PPC_BOOK3E +extern void _tlbil_pid_noind(unsigned int pid); +#else +#define _tlbil_pid_noind(pid) _tlbil_pid(pid) +#endif #endif /* !(CONFIG_40x || CONFIG_8xx) */ /* * On 8xx, we directly inline tlbie, on others, it's extern */ #ifdef CONFIG_8xx -static inline void _tlbil_va(unsigned long address, unsigned int pid) +static inline void _tlbil_va(unsigned long address, unsigned int pid, + unsigned int tsize, unsigned int ind) { asm volatile ("tlbie %0; sync" : : "r" (address) : "memory"); } -#else /* CONFIG_8xx */ -extern void _tlbil_va(unsigned long address, unsigned int pid); +#elif defined(CONFIG_PPC_BOOK3E) +extern void _tlbil_va(unsigned long address, unsigned int pid, + unsigned int tsize, unsigned int ind); +#else +extern void __tlbil_va(unsigned long address, unsigned int pid); +static inline void _tlbil_va(unsigned long address, unsigned int pid, + unsigned int tsize, unsigned int ind) +{ + __tlbil_va(address, pid); +} #endif /* CONIFG_8xx */ /* @@ -58,10 +74,16 @@ extern void _tlbil_va(unsigned long address, unsigned int pid); * implementation. When that becomes the case, this will be * an extern. */ -static inline void _tlbivax_bcast(unsigned long address, unsigned int pid) +#ifdef CONFIG_PPC_BOOK3E +extern void _tlbivax_bcast(unsigned long address, unsigned int pid, + unsigned int tsize, unsigned int ind); +#else +static inline void _tlbivax_bcast(unsigned long address, unsigned int pid, + unsigned int tsize, unsigned int ind) { BUG(); } +#endif #else /* CONFIG_PPC_MMU_NOHASH */ @@ -99,7 +121,12 @@ extern unsigned int rtas_data, rtas_size; struct hash_pte; extern struct hash_pte *Hash, *Hash_end; extern unsigned long Hash_size, Hash_mask; -#endif + +#endif /* CONFIG_PPC32 */ + +#ifdef CONFIG_PPC64 +extern int map_kernel_page(unsigned long ea, unsigned long pa, int flags); +#endif /* CONFIG_PPC64 */ extern unsigned long ioremap_bot; extern unsigned long __max_low_memory; diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c index 627767d6169b..83f1551ec2c9 100644 --- a/arch/powerpc/mm/pgtable.c +++ b/arch/powerpc/mm/pgtable.c @@ -30,6 +30,16 @@ #include <asm/tlbflush.h> #include <asm/tlb.h> +DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); + +#ifdef CONFIG_SMP + +/* + * Handle batching of page table freeing on SMP. Page tables are + * queued up and send to be freed later by RCU in order to avoid + * freeing a page table page that is being walked without locks + */ + static DEFINE_PER_CPU(struct pte_freelist_batch *, pte_freelist_cur); static unsigned long pte_freelist_forced_free; @@ -116,27 +126,7 @@ void pte_free_finish(void) *batchp = NULL; } -/* - * Handle i/d cache flushing, called from set_pte_at() or ptep_set_access_flags() - */ -static pte_t do_dcache_icache_coherency(pte_t pte) -{ - unsigned long pfn = pte_pfn(pte); - struct page *page; - - if (unlikely(!pfn_valid(pfn))) - return pte; - page = pfn_to_page(pfn); - - if (!PageReserved(page) && !test_bit(PG_arch_1, &page->flags)) { - pr_devel("do_dcache_icache_coherency... flushing\n"); - flush_dcache_icache_page(page); - set_bit(PG_arch_1, &page->flags); - } - else - pr_devel("do_dcache_icache_coherency... already clean\n"); - return __pte(pte_val(pte) | _PAGE_HWEXEC); -} +#endif /* CONFIG_SMP */ static inline int is_exec_fault(void) { @@ -145,49 +135,139 @@ static inline int is_exec_fault(void) /* We only try to do i/d cache coherency on stuff that looks like * reasonably "normal" PTEs. We currently require a PTE to be present - * and we avoid _PAGE_SPECIAL and _PAGE_NO_CACHE + * and we avoid _PAGE_SPECIAL and _PAGE_NO_CACHE. We also only do that + * on userspace PTEs */ static inline int pte_looks_normal(pte_t pte) { return (pte_val(pte) & - (_PAGE_PRESENT | _PAGE_SPECIAL | _PAGE_NO_CACHE)) == - (_PAGE_PRESENT); + (_PAGE_PRESENT | _PAGE_SPECIAL | _PAGE_NO_CACHE | _PAGE_USER)) == + (_PAGE_PRESENT | _PAGE_USER); } -#if defined(CONFIG_PPC_STD_MMU) +struct page * maybe_pte_to_page(pte_t pte) +{ + unsigned long pfn = pte_pfn(pte); + struct page *page; + + if (unlikely(!pfn_valid(pfn))) + return NULL; + page = pfn_to_page(pfn); + if (PageReserved(page)) + return NULL; + return page; +} + +#if defined(CONFIG_PPC_STD_MMU) || _PAGE_EXEC == 0 + /* Server-style MMU handles coherency when hashing if HW exec permission - * is supposed per page (currently 64-bit only). Else, we always flush - * valid PTEs in set_pte. + * is supposed per page (currently 64-bit only). If not, then, we always + * flush the cache for valid PTEs in set_pte. Embedded CPU without HW exec + * support falls into the same category. */ -static inline int pte_need_exec_flush(pte_t pte, int set_pte) + +static pte_t set_pte_filter(pte_t pte) { - return set_pte && pte_looks_normal(pte) && - !(cpu_has_feature(CPU_FTR_COHERENT_ICACHE) || - cpu_has_feature(CPU_FTR_NOEXECUTE)); + pte = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS); + if (pte_looks_normal(pte) && !(cpu_has_feature(CPU_FTR_COHERENT_ICACHE) || + cpu_has_feature(CPU_FTR_NOEXECUTE))) { + struct page *pg = maybe_pte_to_page(pte); + if (!pg) + return pte; + if (!test_bit(PG_arch_1, &pg->flags)) { + flush_dcache_icache_page(pg); + set_bit(PG_arch_1, &pg->flags); + } + } + return pte; } -#elif _PAGE_HWEXEC == 0 -/* Embedded type MMU without HW exec support (8xx only so far), we flush - * the cache for any present PTE - */ -static inline int pte_need_exec_flush(pte_t pte, int set_pte) + +static pte_t set_access_flags_filter(pte_t pte, struct vm_area_struct *vma, + int dirty) { - return set_pte && pte_looks_normal(pte); + return pte; } -#else -/* Other embedded CPUs with HW exec support per-page, we flush on exec - * fault if HWEXEC is not set + +#else /* defined(CONFIG_PPC_STD_MMU) || _PAGE_EXEC == 0 */ + +/* Embedded type MMU with HW exec support. This is a bit more complicated + * as we don't have two bits to spare for _PAGE_EXEC and _PAGE_HWEXEC so + * instead we "filter out" the exec permission for non clean pages. */ -static inline int pte_need_exec_flush(pte_t pte, int set_pte) +static pte_t set_pte_filter(pte_t pte) { - return pte_looks_normal(pte) && is_exec_fault() && - !(pte_val(pte) & _PAGE_HWEXEC); + struct page *pg; + + /* No exec permission in the first place, move on */ + if (!(pte_val(pte) & _PAGE_EXEC) || !pte_looks_normal(pte)) + return pte; + + /* If you set _PAGE_EXEC on weird pages you're on your own */ + pg = maybe_pte_to_page(pte); + if (unlikely(!pg)) + return pte; + + /* If the page clean, we move on */ + if (test_bit(PG_arch_1, &pg->flags)) + return pte; + + /* If it's an exec fault, we flush the cache and make it clean */ + if (is_exec_fault()) { + flush_dcache_icache_page(pg); + set_bit(PG_arch_1, &pg->flags); + return pte; + } + + /* Else, we filter out _PAGE_EXEC */ + return __pte(pte_val(pte) & ~_PAGE_EXEC); } -#endif + +static pte_t set_access_flags_filter(pte_t pte, struct vm_area_struct *vma, + int dirty) +{ + struct page *pg; + + /* So here, we only care about exec faults, as we use them + * to recover lost _PAGE_EXEC and perform I$/D$ coherency + * if necessary. Also if _PAGE_EXEC is already set, same deal, + * we just bail out + */ + if (dirty || (pte_val(pte) & _PAGE_EXEC) || !is_exec_fault()) + return pte; + +#ifdef CONFIG_DEBUG_VM + /* So this is an exec fault, _PAGE_EXEC is not set. If it was + * an error we would have bailed out earlier in do_page_fault() + * but let's make sure of it + */ + if (WARN_ON(!(vma->vm_flags & VM_EXEC))) + return pte; +#endif /* CONFIG_DEBUG_VM */ + + /* If you set _PAGE_EXEC on weird pages you're on your own */ + pg = maybe_pte_to_page(pte); + if (unlikely(!pg)) + goto bail; + + /* If the page is already clean, we move on */ + if (test_bit(PG_arch_1, &pg->flags)) + goto bail; + + /* Clean the page and set PG_arch_1 */ + flush_dcache_icache_page(pg); + set_bit(PG_arch_1, &pg->flags); + + bail: + return __pte(pte_val(pte) | _PAGE_EXEC); +} + +#endif /* !(defined(CONFIG_PPC_STD_MMU) || _PAGE_EXEC == 0) */ /* * set_pte stores a linux PTE into the linux page table. */ -void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte) +void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, + pte_t pte) { #ifdef CONFIG_DEBUG_VM WARN_ON(pte_present(*ptep)); @@ -196,9 +276,7 @@ void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte * this context might not have been activated yet when this * is called. */ - pte = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS); - if (pte_need_exec_flush(pte, 1)) - pte = do_dcache_icache_coherency(pte); + pte = set_pte_filter(pte); /* Perform the setting of the PTE */ __set_pte_at(mm, addr, ptep, pte, 0); @@ -215,8 +293,7 @@ int ptep_set_access_flags(struct vm_area_struct *vma, unsigned long address, pte_t *ptep, pte_t entry, int dirty) { int changed; - if (!dirty && pte_need_exec_flush(entry, 0)) - entry = do_dcache_icache_coherency(entry); + entry = set_access_flags_filter(entry, vma, dirty); changed = !pte_same(*(ptep), entry); if (changed) { if (!(vma->vm_flags & VM_HUGETLB)) @@ -242,7 +319,7 @@ void assert_pte_locked(struct mm_struct *mm, unsigned long addr) BUG_ON(pud_none(*pud)); pmd = pmd_offset(pud, addr); BUG_ON(!pmd_present(*pmd)); - BUG_ON(!spin_is_locked(pte_lockptr(mm, pmd))); + assert_spin_locked(pte_lockptr(mm, pmd)); } #endif /* CONFIG_DEBUG_VM */ diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c index 5422169626ba..cb96cb2e17cc 100644 --- a/arch/powerpc/mm/pgtable_32.c +++ b/arch/powerpc/mm/pgtable_32.c @@ -142,7 +142,7 @@ ioremap_flags(phys_addr_t addr, unsigned long size, unsigned long flags) flags |= _PAGE_DIRTY | _PAGE_HWWRITE; /* we don't want to let _PAGE_USER and _PAGE_EXEC leak out */ - flags &= ~(_PAGE_USER | _PAGE_EXEC | _PAGE_HWEXEC); + flags &= ~(_PAGE_USER | _PAGE_EXEC); return __ioremap_caller(addr, size, flags, __builtin_return_address(0)); } diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c index bfa7db6b2fd5..853d5565eed5 100644 --- a/arch/powerpc/mm/pgtable_64.c +++ b/arch/powerpc/mm/pgtable_64.c @@ -33,6 +33,8 @@ #include <linux/stddef.h> #include <linux/vmalloc.h> #include <linux/init.h> +#include <linux/bootmem.h> +#include <linux/lmb.h> #include <asm/pgalloc.h> #include <asm/page.h> @@ -55,19 +57,36 @@ unsigned long ioremap_bot = IOREMAP_BASE; + +#ifdef CONFIG_PPC_MMU_NOHASH +static void *early_alloc_pgtable(unsigned long size) +{ + void *pt; + + if (init_bootmem_done) + pt = __alloc_bootmem(size, size, __pa(MAX_DMA_ADDRESS)); + else + pt = __va(lmb_alloc_base(size, size, + __pa(MAX_DMA_ADDRESS))); + memset(pt, 0, size); + + return pt; +} +#endif /* CONFIG_PPC_MMU_NOHASH */ + /* - * map_io_page currently only called by __ioremap - * map_io_page adds an entry to the ioremap page table + * map_kernel_page currently only called by __ioremap + * map_kernel_page adds an entry to the ioremap page table * and adds an entry to the HPT, possibly bolting it */ -static int map_io_page(unsigned long ea, unsigned long pa, int flags) +int map_kernel_page(unsigned long ea, unsigned long pa, int flags) { pgd_t *pgdp; pud_t *pudp; pmd_t *pmdp; pte_t *ptep; - if (mem_init_done) { + if (slab_is_available()) { pgdp = pgd_offset_k(ea); pudp = pud_alloc(&init_mm, pgdp, ea); if (!pudp) @@ -81,6 +100,35 @@ static int map_io_page(unsigned long ea, unsigned long pa, int flags) set_pte_at(&init_mm, ea, ptep, pfn_pte(pa >> PAGE_SHIFT, __pgprot(flags))); } else { +#ifdef CONFIG_PPC_MMU_NOHASH + /* Warning ! This will blow up if bootmem is not initialized + * which our ppc64 code is keen to do that, we'll need to + * fix it and/or be more careful + */ + pgdp = pgd_offset_k(ea); +#ifdef PUD_TABLE_SIZE + if (pgd_none(*pgdp)) { + pudp = early_alloc_pgtable(PUD_TABLE_SIZE); + BUG_ON(pudp == NULL); + pgd_populate(&init_mm, pgdp, pudp); + } +#endif /* PUD_TABLE_SIZE */ + pudp = pud_offset(pgdp, ea); + if (pud_none(*pudp)) { + pmdp = early_alloc_pgtable(PMD_TABLE_SIZE); + BUG_ON(pmdp == NULL); + pud_populate(&init_mm, pudp, pmdp); + } + pmdp = pmd_offset(pudp, ea); + if (!pmd_present(*pmdp)) { + ptep = early_alloc_pgtable(PAGE_SIZE); + BUG_ON(ptep == NULL); + pmd_populate_kernel(&init_mm, pmdp, ptep); + } + ptep = pte_offset_kernel(pmdp, ea); + set_pte_at(&init_mm, ea, ptep, pfn_pte(pa >> PAGE_SHIFT, + __pgprot(flags))); +#else /* CONFIG_PPC_MMU_NOHASH */ /* * If the mm subsystem is not fully up, we cannot create a * linux page table entry for this mapping. Simply bolt an @@ -93,6 +141,7 @@ static int map_io_page(unsigned long ea, unsigned long pa, int flags) "memory at %016lx !\n", pa); return -ENOMEM; } +#endif /* !CONFIG_PPC_MMU_NOHASH */ } return 0; } @@ -124,7 +173,7 @@ void __iomem * __ioremap_at(phys_addr_t pa, void *ea, unsigned long size, WARN_ON(size & ~PAGE_MASK); for (i = 0; i < size; i += PAGE_SIZE) - if (map_io_page((unsigned long)ea+i, pa+i, flags)) + if (map_kernel_page((unsigned long)ea+i, pa+i, flags)) return NULL; return (void __iomem *)ea; diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c index 5b7038f248b6..1d98ecc8eecd 100644 --- a/arch/powerpc/mm/slb.c +++ b/arch/powerpc/mm/slb.c @@ -92,15 +92,13 @@ static inline void create_shadowed_slbe(unsigned long ea, int ssize, : "memory" ); } -void slb_flush_and_rebolt(void) +static void __slb_flush_and_rebolt(void) { /* If you change this make sure you change SLB_NUM_BOLTED * appropriately too. */ unsigned long linear_llp, vmalloc_llp, lflags, vflags; unsigned long ksp_esid_data, ksp_vsid_data; - WARN_ON(!irqs_disabled()); - linear_llp = mmu_psize_defs[mmu_linear_psize].sllp; vmalloc_llp = mmu_psize_defs[mmu_vmalloc_psize].sllp; lflags = SLB_VSID_KERNEL | linear_llp; @@ -117,12 +115,6 @@ void slb_flush_and_rebolt(void) ksp_vsid_data = get_slb_shadow()->save_area[2].vsid; } - /* - * We can't take a PMU exception in the following code, so hard - * disable interrupts. - */ - hard_irq_disable(); - /* We need to do this all in asm, so we're sure we don't touch * the stack between the slbia and rebolting it. */ asm volatile("isync\n" @@ -139,6 +131,21 @@ void slb_flush_and_rebolt(void) : "memory"); } +void slb_flush_and_rebolt(void) +{ + + WARN_ON(!irqs_disabled()); + + /* + * We can't take a PMU exception in the following code, so hard + * disable interrupts. + */ + hard_irq_disable(); + + __slb_flush_and_rebolt(); + get_paca()->slb_cache_ptr = 0; +} + void slb_vmalloc_update(void) { unsigned long vflags; @@ -180,12 +187,20 @@ static inline int esids_match(unsigned long addr1, unsigned long addr2) /* Flush all user entries from the segment table of the current processor. */ void switch_slb(struct task_struct *tsk, struct mm_struct *mm) { - unsigned long offset = get_paca()->slb_cache_ptr; + unsigned long offset; unsigned long slbie_data = 0; unsigned long pc = KSTK_EIP(tsk); unsigned long stack = KSTK_ESP(tsk); - unsigned long unmapped_base; + unsigned long exec_base; + /* + * We need interrupts hard-disabled here, not just soft-disabled, + * so that a PMU interrupt can't occur, which might try to access + * user memory (to get a stack trace) and possible cause an SLB miss + * which would update the slb_cache/slb_cache_ptr fields in the PACA. + */ + hard_irq_disable(); + offset = get_paca()->slb_cache_ptr; if (!cpu_has_feature(CPU_FTR_NO_SLBIE_B) && offset <= SLB_CACHE_ENTRIES) { int i; @@ -200,7 +215,7 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm) } asm volatile("isync" : : : "memory"); } else { - slb_flush_and_rebolt(); + __slb_flush_and_rebolt(); } /* Workaround POWER5 < DD2.1 issue */ @@ -212,42 +227,44 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm) /* * preload some userspace segments into the SLB. + * Almost all 32 and 64bit PowerPC executables are linked at + * 0x10000000 so it makes sense to preload this segment. */ - if (test_tsk_thread_flag(tsk, TIF_32BIT)) - unmapped_base = TASK_UNMAPPED_BASE_USER32; - else - unmapped_base = TASK_UNMAPPED_BASE_USER64; + exec_base = 0x10000000; - if (is_kernel_addr(pc)) - return; - slb_allocate(pc); - - if (esids_match(pc,stack)) + if (is_kernel_addr(pc) || is_kernel_addr(stack) || + is_kernel_addr(exec_base)) return; - if (is_kernel_addr(stack)) - return; - slb_allocate(stack); + slb_allocate(pc); - if (esids_match(pc,unmapped_base) || esids_match(stack,unmapped_base)) - return; + if (!esids_match(pc, stack)) + slb_allocate(stack); - if (is_kernel_addr(unmapped_base)) - return; - slb_allocate(unmapped_base); + if (!esids_match(pc, exec_base) && + !esids_match(stack, exec_base)) + slb_allocate(exec_base); } static inline void patch_slb_encoding(unsigned int *insn_addr, unsigned int immed) { - /* Assume the instruction had a "0" immediate value, just - * "or" in the new value - */ - *insn_addr |= immed; + *insn_addr = (*insn_addr & 0xffff0000) | immed; flush_icache_range((unsigned long)insn_addr, 4+ (unsigned long)insn_addr); } +void slb_set_size(u16 size) +{ + extern unsigned int *slb_compare_rr_to_size; + + if (mmu_slb_size == size) + return; + + mmu_slb_size = size; + patch_slb_encoding(slb_compare_rr_to_size, mmu_slb_size); +} + void slb_initialize(void) { unsigned long linear_llp, vmalloc_llp, io_llp; diff --git a/arch/powerpc/mm/stab.c b/arch/powerpc/mm/stab.c index 98cd1dc2ae75..687fddaa24c5 100644 --- a/arch/powerpc/mm/stab.c +++ b/arch/powerpc/mm/stab.c @@ -31,7 +31,7 @@ struct stab_entry { #define NR_STAB_CACHE_ENTRIES 8 static DEFINE_PER_CPU(long, stab_cache_ptr); -static DEFINE_PER_CPU(long, stab_cache[NR_STAB_CACHE_ENTRIES]); +static DEFINE_PER_CPU(long [NR_STAB_CACHE_ENTRIES], stab_cache); /* * Create a segment table entry for the given esid/vsid pair. @@ -164,7 +164,7 @@ void switch_stab(struct task_struct *tsk, struct mm_struct *mm) { struct stab_entry *stab = (struct stab_entry *) get_paca()->stab_addr; struct stab_entry *ste; - unsigned long offset = __get_cpu_var(stab_cache_ptr); + unsigned long offset; unsigned long pc = KSTK_EIP(tsk); unsigned long stack = KSTK_ESP(tsk); unsigned long unmapped_base; @@ -172,6 +172,15 @@ void switch_stab(struct task_struct *tsk, struct mm_struct *mm) /* Force previous translations to complete. DRENG */ asm volatile("isync" : : : "memory"); + /* + * We need interrupts hard-disabled here, not just soft-disabled, + * so that a PMU interrupt can't occur, which might try to access + * user memory (to get a stack trace) and possible cause an STAB miss + * which would update the stab_cache/stab_cache_ptr per-cpu variables. + */ + hard_irq_disable(); + + offset = __get_cpu_var(stab_cache_ptr); if (offset <= NR_STAB_CACHE_ENTRIES) { int i; diff --git a/arch/powerpc/mm/tlb_hash32.c b/arch/powerpc/mm/tlb_hash32.c index 65190587a365..8aaa8b7eb324 100644 --- a/arch/powerpc/mm/tlb_hash32.c +++ b/arch/powerpc/mm/tlb_hash32.c @@ -71,6 +71,9 @@ void tlb_flush(struct mmu_gather *tlb) */ _tlbia(); } + + /* Push out batch of freed page tables */ + pte_free_finish(); } /* diff --git a/arch/powerpc/mm/tlb_hash64.c b/arch/powerpc/mm/tlb_hash64.c index 937eb90677d9..2b2f35f6985e 100644 --- a/arch/powerpc/mm/tlb_hash64.c +++ b/arch/powerpc/mm/tlb_hash64.c @@ -33,11 +33,6 @@ DEFINE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch); -/* This is declared as we are using the more or less generic - * arch/powerpc/include/asm/tlb.h file -- tgall - */ -DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); - /* * A linux PTE was changed and the corresponding hash table entry * neesd to be flushed. This function will either perform the flush @@ -154,6 +149,21 @@ void __flush_tlb_pending(struct ppc64_tlb_batch *batch) batch->index = 0; } +void tlb_flush(struct mmu_gather *tlb) +{ + struct ppc64_tlb_batch *tlbbatch = &__get_cpu_var(ppc64_tlb_batch); + + /* If there's a TLB batch pending, then we must flush it because the + * pages are going to be freed and we really don't want to have a CPU + * access a freed page because it has a stale TLB + */ + if (tlbbatch->index) + __flush_tlb_pending(tlbbatch); + + /* Push out batch of freed page tables */ + pte_free_finish(); +} + /** * __flush_hash_table_range - Flush all HPTEs for a given address range * from the hash table (and the TLB). But keeps diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S new file mode 100644 index 000000000000..ef1cccf71173 --- /dev/null +++ b/arch/powerpc/mm/tlb_low_64e.S @@ -0,0 +1,770 @@ +/* + * Low leve TLB miss handlers for Book3E + * + * Copyright (C) 2008-2009 + * Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <asm/processor.h> +#include <asm/reg.h> +#include <asm/page.h> +#include <asm/mmu.h> +#include <asm/ppc_asm.h> +#include <asm/asm-offsets.h> +#include <asm/cputable.h> +#include <asm/pgtable.h> +#include <asm/reg.h> +#include <asm/exception-64e.h> +#include <asm/ppc-opcode.h> + +#ifdef CONFIG_PPC_64K_PAGES +#define VPTE_PMD_SHIFT (PTE_INDEX_SIZE+1) +#else +#define VPTE_PMD_SHIFT (PTE_INDEX_SIZE) +#endif +#define VPTE_PUD_SHIFT (VPTE_PMD_SHIFT + PMD_INDEX_SIZE) +#define VPTE_PGD_SHIFT (VPTE_PUD_SHIFT + PUD_INDEX_SIZE) +#define VPTE_INDEX_SIZE (VPTE_PGD_SHIFT + PGD_INDEX_SIZE) + + +/********************************************************************** + * * + * TLB miss handling for Book3E with TLB reservation and HES support * + * * + **********************************************************************/ + + +/* Data TLB miss */ + START_EXCEPTION(data_tlb_miss) + TLB_MISS_PROLOG + + /* Now we handle the fault proper. We only save DEAR in normal + * fault case since that's the only interesting values here. + * We could probably also optimize by not saving SRR0/1 in the + * linear mapping case but I'll leave that for later + */ + mfspr r14,SPRN_ESR + mfspr r16,SPRN_DEAR /* get faulting address */ + srdi r15,r16,60 /* get region */ + cmpldi cr0,r15,0xc /* linear mapping ? */ + TLB_MISS_STATS_SAVE_INFO + beq tlb_load_linear /* yes -> go to linear map load */ + + /* The page tables are mapped virtually linear. At this point, though, + * we don't know whether we are trying to fault in a first level + * virtual address or a virtual page table address. We can get that + * from bit 0x1 of the region ID which we have set for a page table + */ + andi. r10,r15,0x1 + bne- virt_page_table_tlb_miss + + std r14,EX_TLB_ESR(r12); /* save ESR */ + std r16,EX_TLB_DEAR(r12); /* save DEAR */ + + /* We need _PAGE_PRESENT and _PAGE_ACCESSED set */ + li r11,_PAGE_PRESENT + oris r11,r11,_PAGE_ACCESSED@h + + /* We do the user/kernel test for the PID here along with the RW test + */ + cmpldi cr0,r15,0 /* Check for user region */ + + /* We pre-test some combination of permissions to avoid double + * faults: + * + * We move the ESR:ST bit into the position of _PAGE_BAP_SW in the PTE + * ESR_ST is 0x00800000 + * _PAGE_BAP_SW is 0x00000010 + * So the shift is >> 19. This tests for supervisor writeability. + * If the page happens to be supervisor writeable and not user + * writeable, we will take a new fault later, but that should be + * a rare enough case. + * + * We also move ESR_ST in _PAGE_DIRTY position + * _PAGE_DIRTY is 0x00001000 so the shift is >> 11 + * + * MAS1 is preset for all we need except for TID that needs to + * be cleared for kernel translations + */ + rlwimi r11,r14,32-19,27,27 + rlwimi r11,r14,32-16,19,19 + beq normal_tlb_miss + /* XXX replace the RMW cycles with immediate loads + writes */ +1: mfspr r10,SPRN_MAS1 + cmpldi cr0,r15,8 /* Check for vmalloc region */ + rlwinm r10,r10,0,16,1 /* Clear TID */ + mtspr SPRN_MAS1,r10 + beq+ normal_tlb_miss + + /* We got a crappy address, just fault with whatever DEAR and ESR + * are here + */ + TLB_MISS_STATS_D(MMSTAT_TLB_MISS_NORM_FAULT) + TLB_MISS_EPILOG_ERROR + b exc_data_storage_book3e + +/* Instruction TLB miss */ + START_EXCEPTION(instruction_tlb_miss) + TLB_MISS_PROLOG + + /* If we take a recursive fault, the second level handler may need + * to know whether we are handling a data or instruction fault in + * order to get to the right store fault handler. We provide that + * info by writing a crazy value in ESR in our exception frame + */ + li r14,-1 /* store to exception frame is done later */ + + /* Now we handle the fault proper. We only save DEAR in the non + * linear mapping case since we know the linear mapping case will + * not re-enter. We could indeed optimize and also not save SRR0/1 + * in the linear mapping case but I'll leave that for later + * + * Faulting address is SRR0 which is already in r16 + */ + srdi r15,r16,60 /* get region */ + cmpldi cr0,r15,0xc /* linear mapping ? */ + TLB_MISS_STATS_SAVE_INFO + beq tlb_load_linear /* yes -> go to linear map load */ + + /* We do the user/kernel test for the PID here along with the RW test + */ + li r11,_PAGE_PRESENT|_PAGE_EXEC /* Base perm */ + oris r11,r11,_PAGE_ACCESSED@h + + cmpldi cr0,r15,0 /* Check for user region */ + std r14,EX_TLB_ESR(r12) /* write crazy -1 to frame */ + beq normal_tlb_miss + /* XXX replace the RMW cycles with immediate loads + writes */ +1: mfspr r10,SPRN_MAS1 + cmpldi cr0,r15,8 /* Check for vmalloc region */ + rlwinm r10,r10,0,16,1 /* Clear TID */ + mtspr SPRN_MAS1,r10 + beq+ normal_tlb_miss + + /* We got a crappy address, just fault */ + TLB_MISS_STATS_I(MMSTAT_TLB_MISS_NORM_FAULT) + TLB_MISS_EPILOG_ERROR + b exc_instruction_storage_book3e + +/* + * This is the guts of the first-level TLB miss handler for direct + * misses. We are entered with: + * + * r16 = faulting address + * r15 = region ID + * r14 = crap (free to use) + * r13 = PACA + * r12 = TLB exception frame in PACA + * r11 = PTE permission mask + * r10 = crap (free to use) + */ +normal_tlb_miss: + /* So we first construct the page table address. We do that by + * shifting the bottom of the address (not the region ID) by + * PAGE_SHIFT-3, clearing the bottom 3 bits (get a PTE ptr) and + * or'ing the fourth high bit. + * + * NOTE: For 64K pages, we do things slightly differently in + * order to handle the weird page table format used by linux + */ + ori r10,r15,0x1 +#ifdef CONFIG_PPC_64K_PAGES + /* For the top bits, 16 bytes per PTE */ + rldicl r14,r16,64-(PAGE_SHIFT-4),PAGE_SHIFT-4+4 + /* Now create the bottom bits as 0 in position 0x8000 and + * the rest calculated for 8 bytes per PTE + */ + rldicl r15,r16,64-(PAGE_SHIFT-3),64-15 + /* Insert the bottom bits in */ + rlwimi r14,r15,0,16,31 +#else + rldicl r14,r16,64-(PAGE_SHIFT-3),PAGE_SHIFT-3+4 +#endif + sldi r15,r10,60 + clrrdi r14,r14,3 + or r10,r15,r14 + +BEGIN_MMU_FTR_SECTION + /* Set the TLB reservation and seach for existing entry. Then load + * the entry. + */ + PPC_TLBSRX_DOT(0,r16) + ld r14,0(r10) + beq normal_tlb_miss_done +MMU_FTR_SECTION_ELSE + ld r14,0(r10) +ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_USE_TLBRSRV) + +finish_normal_tlb_miss: + /* Check if required permissions are met */ + andc. r15,r11,r14 + bne- normal_tlb_miss_access_fault + + /* Now we build the MAS: + * + * MAS 0 : Fully setup with defaults in MAS4 and TLBnCFG + * MAS 1 : Almost fully setup + * - PID already updated by caller if necessary + * - TSIZE need change if !base page size, not + * yet implemented for now + * MAS 2 : Defaults not useful, need to be redone + * MAS 3+7 : Needs to be done + * + * TODO: mix up code below for better scheduling + */ + clrrdi r11,r16,12 /* Clear low crap in EA */ + rlwimi r11,r14,32-19,27,31 /* Insert WIMGE */ + mtspr SPRN_MAS2,r11 + + /* Check page size, if not standard, update MAS1 */ + rldicl r11,r14,64-8,64-8 +#ifdef CONFIG_PPC_64K_PAGES + cmpldi cr0,r11,BOOK3E_PAGESZ_64K +#else + cmpldi cr0,r11,BOOK3E_PAGESZ_4K +#endif + beq- 1f + mfspr r11,SPRN_MAS1 + rlwimi r11,r14,31,21,24 + rlwinm r11,r11,0,21,19 + mtspr SPRN_MAS1,r11 +1: + /* Move RPN in position */ + rldicr r11,r14,64-(PTE_RPN_SHIFT-PAGE_SHIFT),63-PAGE_SHIFT + clrldi r15,r11,12 /* Clear crap at the top */ + rlwimi r15,r14,32-8,22,25 /* Move in U bits */ + rlwimi r15,r14,32-2,26,31 /* Move in BAP bits */ + + /* Mask out SW and UW if !DIRTY (XXX optimize this !) */ + andi. r11,r14,_PAGE_DIRTY + bne 1f + li r11,MAS3_SW|MAS3_UW + andc r15,r15,r11 +1: +BEGIN_MMU_FTR_SECTION + srdi r16,r15,32 + mtspr SPRN_MAS3,r15 + mtspr SPRN_MAS7,r16 +MMU_FTR_SECTION_ELSE + mtspr SPRN_MAS7_MAS3,r15 +ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_PAIRED_MAS) + + tlbwe + +normal_tlb_miss_done: + /* We don't bother with restoring DEAR or ESR since we know we are + * level 0 and just going back to userland. They are only needed + * if you are going to take an access fault + */ + TLB_MISS_STATS_X(MMSTAT_TLB_MISS_NORM_OK) + TLB_MISS_EPILOG_SUCCESS + rfi + +normal_tlb_miss_access_fault: + /* We need to check if it was an instruction miss */ + andi. r10,r11,_PAGE_EXEC + bne 1f + ld r14,EX_TLB_DEAR(r12) + ld r15,EX_TLB_ESR(r12) + mtspr SPRN_DEAR,r14 + mtspr SPRN_ESR,r15 + TLB_MISS_STATS_D(MMSTAT_TLB_MISS_NORM_FAULT) + TLB_MISS_EPILOG_ERROR + b exc_data_storage_book3e +1: TLB_MISS_STATS_I(MMSTAT_TLB_MISS_NORM_FAULT) + TLB_MISS_EPILOG_ERROR + b exc_instruction_storage_book3e + + +/* + * This is the guts of the second-level TLB miss handler for direct + * misses. We are entered with: + * + * r16 = virtual page table faulting address + * r15 = region (top 4 bits of address) + * r14 = crap (free to use) + * r13 = PACA + * r12 = TLB exception frame in PACA + * r11 = crap (free to use) + * r10 = crap (free to use) + * + * Note that this should only ever be called as a second level handler + * with the current scheme when using SW load. + * That means we can always get the original fault DEAR at + * EX_TLB_DEAR-EX_TLB_SIZE(r12) + * + * It can be re-entered by the linear mapping miss handler. However, to + * avoid too much complication, it will restart the whole fault at level + * 0 so we don't care too much about clobbers + * + * XXX That code was written back when we couldn't clobber r14. We can now, + * so we could probably optimize things a bit + */ +virt_page_table_tlb_miss: + /* Are we hitting a kernel page table ? */ + andi. r10,r15,0x8 + + /* The cool thing now is that r10 contains 0 for user and 8 for kernel, + * and we happen to have the swapper_pg_dir at offset 8 from the user + * pgdir in the PACA :-). + */ + add r11,r10,r13 + + /* If kernel, we need to clear MAS1 TID */ + beq 1f + /* XXX replace the RMW cycles with immediate loads + writes */ + mfspr r10,SPRN_MAS1 + rlwinm r10,r10,0,16,1 /* Clear TID */ + mtspr SPRN_MAS1,r10 +1: +BEGIN_MMU_FTR_SECTION + /* Search if we already have a TLB entry for that virtual address, and + * if we do, bail out. + */ + PPC_TLBSRX_DOT(0,r16) + beq virt_page_table_tlb_miss_done +END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_TLBRSRV) + + /* Now, we need to walk the page tables. First check if we are in + * range. + */ + rldicl. r10,r16,64-(VPTE_INDEX_SIZE+3),VPTE_INDEX_SIZE+3+4 + bne- virt_page_table_tlb_miss_fault + + /* Get the PGD pointer */ + ld r15,PACAPGD(r11) + cmpldi cr0,r15,0 + beq- virt_page_table_tlb_miss_fault + + /* Get to PGD entry */ + rldicl r11,r16,64-VPTE_PGD_SHIFT,64-PGD_INDEX_SIZE-3 + clrrdi r10,r11,3 + ldx r15,r10,r15 + cmpldi cr0,r15,0 + beq virt_page_table_tlb_miss_fault + +#ifndef CONFIG_PPC_64K_PAGES + /* Get to PUD entry */ + rldicl r11,r16,64-VPTE_PUD_SHIFT,64-PUD_INDEX_SIZE-3 + clrrdi r10,r11,3 + ldx r15,r10,r15 + cmpldi cr0,r15,0 + beq virt_page_table_tlb_miss_fault +#endif /* CONFIG_PPC_64K_PAGES */ + + /* Get to PMD entry */ + rldicl r11,r16,64-VPTE_PMD_SHIFT,64-PMD_INDEX_SIZE-3 + clrrdi r10,r11,3 + ldx r15,r10,r15 + cmpldi cr0,r15,0 + beq virt_page_table_tlb_miss_fault + + /* Ok, we're all right, we can now create a kernel translation for + * a 4K or 64K page from r16 -> r15. + */ + /* Now we build the MAS: + * + * MAS 0 : Fully setup with defaults in MAS4 and TLBnCFG + * MAS 1 : Almost fully setup + * - PID already updated by caller if necessary + * - TSIZE for now is base page size always + * MAS 2 : Use defaults + * MAS 3+7 : Needs to be done + * + * So we only do MAS 2 and 3 for now... + */ + clrldi r11,r15,4 /* remove region ID from RPN */ + ori r10,r11,1 /* Or-in SR */ + +BEGIN_MMU_FTR_SECTION + srdi r16,r10,32 + mtspr SPRN_MAS3,r10 + mtspr SPRN_MAS7,r16 +MMU_FTR_SECTION_ELSE + mtspr SPRN_MAS7_MAS3,r10 +ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_PAIRED_MAS) + + tlbwe + +BEGIN_MMU_FTR_SECTION +virt_page_table_tlb_miss_done: + + /* We have overriden MAS2:EPN but currently our primary TLB miss + * handler will always restore it so that should not be an issue, + * if we ever optimize the primary handler to not write MAS2 on + * some cases, we'll have to restore MAS2:EPN here based on the + * original fault's DEAR. If we do that we have to modify the + * ITLB miss handler to also store SRR0 in the exception frame + * as DEAR. + * + * However, one nasty thing we did is we cleared the reservation + * (well, potentially we did). We do a trick here thus if we + * are not a level 0 exception (we interrupted the TLB miss) we + * offset the return address by -4 in order to replay the tlbsrx + * instruction there + */ + subf r10,r13,r12 + cmpldi cr0,r10,PACA_EXTLB+EX_TLB_SIZE + bne- 1f + ld r11,PACA_EXTLB+EX_TLB_SIZE+EX_TLB_SRR0(r13) + addi r10,r11,-4 + std r10,PACA_EXTLB+EX_TLB_SIZE+EX_TLB_SRR0(r13) +1: +END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_TLBRSRV) + /* Return to caller, normal case */ + TLB_MISS_STATS_X(MMSTAT_TLB_MISS_PT_OK); + TLB_MISS_EPILOG_SUCCESS + rfi + +virt_page_table_tlb_miss_fault: + /* If we fault here, things are a little bit tricky. We need to call + * either data or instruction store fault, and we need to retreive + * the original fault address and ESR (for data). + * + * The thing is, we know that in normal circumstances, this is + * always called as a second level tlb miss for SW load or as a first + * level TLB miss for HW load, so we should be able to peek at the + * relevant informations in the first exception frame in the PACA. + * + * However, we do need to double check that, because we may just hit + * a stray kernel pointer or a userland attack trying to hit those + * areas. If that is the case, we do a data fault. (We can't get here + * from an instruction tlb miss anyway). + * + * Note also that when going to a fault, we must unwind the previous + * level as well. Since we are doing that, we don't need to clear or + * restore the TLB reservation neither. + */ + subf r10,r13,r12 + cmpldi cr0,r10,PACA_EXTLB+EX_TLB_SIZE + bne- virt_page_table_tlb_miss_whacko_fault + + /* We dig the original DEAR and ESR from slot 0 */ + ld r15,EX_TLB_DEAR+PACA_EXTLB(r13) + ld r16,EX_TLB_ESR+PACA_EXTLB(r13) + + /* We check for the "special" ESR value for instruction faults */ + cmpdi cr0,r16,-1 + beq 1f + mtspr SPRN_DEAR,r15 + mtspr SPRN_ESR,r16 + TLB_MISS_STATS_D(MMSTAT_TLB_MISS_PT_FAULT); + TLB_MISS_EPILOG_ERROR + b exc_data_storage_book3e +1: TLB_MISS_STATS_I(MMSTAT_TLB_MISS_PT_FAULT); + TLB_MISS_EPILOG_ERROR + b exc_instruction_storage_book3e + +virt_page_table_tlb_miss_whacko_fault: + /* The linear fault will restart everything so ESR and DEAR will + * not have been clobbered, let's just fault with what we have + */ + TLB_MISS_STATS_X(MMSTAT_TLB_MISS_PT_FAULT); + TLB_MISS_EPILOG_ERROR + b exc_data_storage_book3e + + +/************************************************************** + * * + * TLB miss handling for Book3E with hw page table support * + * * + **************************************************************/ + + +/* Data TLB miss */ + START_EXCEPTION(data_tlb_miss_htw) + TLB_MISS_PROLOG + + /* Now we handle the fault proper. We only save DEAR in normal + * fault case since that's the only interesting values here. + * We could probably also optimize by not saving SRR0/1 in the + * linear mapping case but I'll leave that for later + */ + mfspr r14,SPRN_ESR + mfspr r16,SPRN_DEAR /* get faulting address */ + srdi r11,r16,60 /* get region */ + cmpldi cr0,r11,0xc /* linear mapping ? */ + TLB_MISS_STATS_SAVE_INFO + beq tlb_load_linear /* yes -> go to linear map load */ + + /* We do the user/kernel test for the PID here along with the RW test + */ + cmpldi cr0,r11,0 /* Check for user region */ + ld r15,PACAPGD(r13) /* Load user pgdir */ + beq htw_tlb_miss + + /* XXX replace the RMW cycles with immediate loads + writes */ +1: mfspr r10,SPRN_MAS1 + cmpldi cr0,r11,8 /* Check for vmalloc region */ + rlwinm r10,r10,0,16,1 /* Clear TID */ + mtspr SPRN_MAS1,r10 + ld r15,PACA_KERNELPGD(r13) /* Load kernel pgdir */ + beq+ htw_tlb_miss + + /* We got a crappy address, just fault with whatever DEAR and ESR + * are here + */ + TLB_MISS_STATS_D(MMSTAT_TLB_MISS_NORM_FAULT) + TLB_MISS_EPILOG_ERROR + b exc_data_storage_book3e + +/* Instruction TLB miss */ + START_EXCEPTION(instruction_tlb_miss_htw) + TLB_MISS_PROLOG + + /* If we take a recursive fault, the second level handler may need + * to know whether we are handling a data or instruction fault in + * order to get to the right store fault handler. We provide that + * info by keeping a crazy value for ESR in r14 + */ + li r14,-1 /* store to exception frame is done later */ + + /* Now we handle the fault proper. We only save DEAR in the non + * linear mapping case since we know the linear mapping case will + * not re-enter. We could indeed optimize and also not save SRR0/1 + * in the linear mapping case but I'll leave that for later + * + * Faulting address is SRR0 which is already in r16 + */ + srdi r11,r16,60 /* get region */ + cmpldi cr0,r11,0xc /* linear mapping ? */ + TLB_MISS_STATS_SAVE_INFO + beq tlb_load_linear /* yes -> go to linear map load */ + + /* We do the user/kernel test for the PID here along with the RW test + */ + cmpldi cr0,r11,0 /* Check for user region */ + ld r15,PACAPGD(r13) /* Load user pgdir */ + beq htw_tlb_miss + + /* XXX replace the RMW cycles with immediate loads + writes */ +1: mfspr r10,SPRN_MAS1 + cmpldi cr0,r11,8 /* Check for vmalloc region */ + rlwinm r10,r10,0,16,1 /* Clear TID */ + mtspr SPRN_MAS1,r10 + ld r15,PACA_KERNELPGD(r13) /* Load kernel pgdir */ + beq+ htw_tlb_miss + + /* We got a crappy address, just fault */ + TLB_MISS_STATS_I(MMSTAT_TLB_MISS_NORM_FAULT) + TLB_MISS_EPILOG_ERROR + b exc_instruction_storage_book3e + + +/* + * This is the guts of the second-level TLB miss handler for direct + * misses. We are entered with: + * + * r16 = virtual page table faulting address + * r15 = PGD pointer + * r14 = ESR + * r13 = PACA + * r12 = TLB exception frame in PACA + * r11 = crap (free to use) + * r10 = crap (free to use) + * + * It can be re-entered by the linear mapping miss handler. However, to + * avoid too much complication, it will save/restore things for us + */ +htw_tlb_miss: + /* Search if we already have a TLB entry for that virtual address, and + * if we do, bail out. + * + * MAS1:IND should be already set based on MAS4 + */ + PPC_TLBSRX_DOT(0,r16) + beq htw_tlb_miss_done + + /* Now, we need to walk the page tables. First check if we are in + * range. + */ + rldicl. r10,r16,64-PGTABLE_EADDR_SIZE,PGTABLE_EADDR_SIZE+4 + bne- htw_tlb_miss_fault + + /* Get the PGD pointer */ + cmpldi cr0,r15,0 + beq- htw_tlb_miss_fault + + /* Get to PGD entry */ + rldicl r11,r16,64-(PGDIR_SHIFT-3),64-PGD_INDEX_SIZE-3 + clrrdi r10,r11,3 + ldx r15,r10,r15 + cmpldi cr0,r15,0 + beq htw_tlb_miss_fault + +#ifndef CONFIG_PPC_64K_PAGES + /* Get to PUD entry */ + rldicl r11,r16,64-(PUD_SHIFT-3),64-PUD_INDEX_SIZE-3 + clrrdi r10,r11,3 + ldx r15,r10,r15 + cmpldi cr0,r15,0 + beq htw_tlb_miss_fault +#endif /* CONFIG_PPC_64K_PAGES */ + + /* Get to PMD entry */ + rldicl r11,r16,64-(PMD_SHIFT-3),64-PMD_INDEX_SIZE-3 + clrrdi r10,r11,3 + ldx r15,r10,r15 + cmpldi cr0,r15,0 + beq htw_tlb_miss_fault + + /* Ok, we're all right, we can now create an indirect entry for + * a 1M or 256M page. + * + * The last trick is now that because we use "half" pages for + * the HTW (1M IND is 2K and 256M IND is 32K) we need to account + * for an added LSB bit to the RPN. For 64K pages, there is no + * problem as we already use 32K arrays (half PTE pages), but for + * 4K page we need to extract a bit from the virtual address and + * insert it into the "PA52" bit of the RPN. + */ +#ifndef CONFIG_PPC_64K_PAGES + rlwimi r15,r16,32-9,20,20 +#endif + /* Now we build the MAS: + * + * MAS 0 : Fully setup with defaults in MAS4 and TLBnCFG + * MAS 1 : Almost fully setup + * - PID already updated by caller if necessary + * - TSIZE for now is base ind page size always + * MAS 2 : Use defaults + * MAS 3+7 : Needs to be done + */ +#ifdef CONFIG_PPC_64K_PAGES + ori r10,r15,(BOOK3E_PAGESZ_64K << MAS3_SPSIZE_SHIFT) +#else + ori r10,r15,(BOOK3E_PAGESZ_4K << MAS3_SPSIZE_SHIFT) +#endif + +BEGIN_MMU_FTR_SECTION + srdi r16,r10,32 + mtspr SPRN_MAS3,r10 + mtspr SPRN_MAS7,r16 +MMU_FTR_SECTION_ELSE + mtspr SPRN_MAS7_MAS3,r10 +ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_PAIRED_MAS) + + tlbwe + +htw_tlb_miss_done: + /* We don't bother with restoring DEAR or ESR since we know we are + * level 0 and just going back to userland. They are only needed + * if you are going to take an access fault + */ + TLB_MISS_STATS_X(MMSTAT_TLB_MISS_PT_OK) + TLB_MISS_EPILOG_SUCCESS + rfi + +htw_tlb_miss_fault: + /* We need to check if it was an instruction miss. We know this + * though because r14 would contain -1 + */ + cmpdi cr0,r14,-1 + beq 1f + mtspr SPRN_DEAR,r16 + mtspr SPRN_ESR,r14 + TLB_MISS_STATS_D(MMSTAT_TLB_MISS_PT_FAULT) + TLB_MISS_EPILOG_ERROR + b exc_data_storage_book3e +1: TLB_MISS_STATS_I(MMSTAT_TLB_MISS_PT_FAULT) + TLB_MISS_EPILOG_ERROR + b exc_instruction_storage_book3e + +/* + * This is the guts of "any" level TLB miss handler for kernel linear + * mapping misses. We are entered with: + * + * + * r16 = faulting address + * r15 = crap (free to use) + * r14 = ESR (data) or -1 (instruction) + * r13 = PACA + * r12 = TLB exception frame in PACA + * r11 = crap (free to use) + * r10 = crap (free to use) + * + * In addition we know that we will not re-enter, so in theory, we could + * use a simpler epilog not restoring SRR0/1 etc.. but we'll do that later. + * + * We also need to be careful about MAS registers here & TLB reservation, + * as we know we'll have clobbered them if we interrupt the main TLB miss + * handlers in which case we probably want to do a full restart at level + * 0 rather than saving / restoring the MAS. + * + * Note: If we care about performance of that core, we can easily shuffle + * a few things around + */ +tlb_load_linear: + /* For now, we assume the linear mapping is contiguous and stops at + * linear_map_top. We also assume the size is a multiple of 1G, thus + * we only use 1G pages for now. That might have to be changed in a + * final implementation, especially when dealing with hypervisors + */ + ld r11,PACATOC(r13) + ld r11,linear_map_top@got(r11) + ld r10,0(r11) + cmpld cr0,r10,r16 + bge tlb_load_linear_fault + + /* MAS1 need whole new setup. */ + li r15,(BOOK3E_PAGESZ_1GB<<MAS1_TSIZE_SHIFT) + oris r15,r15,MAS1_VALID@h /* MAS1 needs V and TSIZE */ + mtspr SPRN_MAS1,r15 + + /* Already somebody there ? */ + PPC_TLBSRX_DOT(0,r16) + beq tlb_load_linear_done + + /* Now we build the remaining MAS. MAS0 and 2 should be fine + * with their defaults, which leaves us with MAS 3 and 7. The + * mapping is linear, so we just take the address, clear the + * region bits, and or in the permission bits which are currently + * hard wired + */ + clrrdi r10,r16,30 /* 1G page index */ + clrldi r10,r10,4 /* clear region bits */ + ori r10,r10,MAS3_SR|MAS3_SW|MAS3_SX + +BEGIN_MMU_FTR_SECTION + srdi r16,r10,32 + mtspr SPRN_MAS3,r10 + mtspr SPRN_MAS7,r16 +MMU_FTR_SECTION_ELSE + mtspr SPRN_MAS7_MAS3,r10 +ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_PAIRED_MAS) + + tlbwe + +tlb_load_linear_done: + /* We use the "error" epilog for success as we do want to + * restore to the initial faulting context, whatever it was. + * We do that because we can't resume a fault within a TLB + * miss handler, due to MAS and TLB reservation being clobbered. + */ + TLB_MISS_STATS_X(MMSTAT_TLB_MISS_LINEAR) + TLB_MISS_EPILOG_ERROR + rfi + +tlb_load_linear_fault: + /* We keep the DEAR and ESR around, this shouldn't have happened */ + cmpdi cr0,r14,-1 + beq 1f + TLB_MISS_EPILOG_ERROR_SPECIAL + b exc_data_storage_book3e +1: TLB_MISS_EPILOG_ERROR_SPECIAL + b exc_instruction_storage_book3e + + +#ifdef CONFIG_BOOK3E_MMU_TLB_STATS +.tlb_stat_inc: +1: ldarx r8,0,r9 + addi r8,r8,1 + stdcx. r8,0,r9 + bne- 1b + blr +#endif diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c index ad2eb4d34dd4..2fbc680c2c71 100644 --- a/arch/powerpc/mm/tlb_nohash.c +++ b/arch/powerpc/mm/tlb_nohash.c @@ -7,8 +7,8 @@ * * -- BenH * - * Copyright 2008 Ben Herrenschmidt <benh@kernel.crashing.org> - * IBM Corp. + * Copyright 2008,2009 Ben Herrenschmidt <benh@kernel.crashing.org> + * IBM Corp. * * Derived from arch/ppc/mm/init.c: * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) @@ -34,12 +34,71 @@ #include <linux/pagemap.h> #include <linux/preempt.h> #include <linux/spinlock.h> +#include <linux/lmb.h> #include <asm/tlbflush.h> #include <asm/tlb.h> +#include <asm/code-patching.h> #include "mmu_decl.h" +#ifdef CONFIG_PPC_BOOK3E +struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT] = { + [MMU_PAGE_4K] = { + .shift = 12, + .enc = BOOK3E_PAGESZ_4K, + }, + [MMU_PAGE_16K] = { + .shift = 14, + .enc = BOOK3E_PAGESZ_16K, + }, + [MMU_PAGE_64K] = { + .shift = 16, + .enc = BOOK3E_PAGESZ_64K, + }, + [MMU_PAGE_1M] = { + .shift = 20, + .enc = BOOK3E_PAGESZ_1M, + }, + [MMU_PAGE_16M] = { + .shift = 24, + .enc = BOOK3E_PAGESZ_16M, + }, + [MMU_PAGE_256M] = { + .shift = 28, + .enc = BOOK3E_PAGESZ_256M, + }, + [MMU_PAGE_1G] = { + .shift = 30, + .enc = BOOK3E_PAGESZ_1GB, + }, +}; +static inline int mmu_get_tsize(int psize) +{ + return mmu_psize_defs[psize].enc; +} +#else +static inline int mmu_get_tsize(int psize) +{ + /* This isn't used on !Book3E for now */ + return 0; +} +#endif + +/* The variables below are currently only used on 64-bit Book3E + * though this will probably be made common with other nohash + * implementations at some point + */ +#ifdef CONFIG_PPC64 + +int mmu_linear_psize; /* Page size used for the linear mapping */ +int mmu_pte_psize; /* Page size used for PTE pages */ +int mmu_vmemmap_psize; /* Page size used for the virtual mem map */ +int book3e_htw_enabled; /* Is HW tablewalk enabled ? */ +unsigned long linear_map_top; /* Top of linear mapping */ + +#endif /* CONFIG_PPC64 */ + /* * Base TLB flushing operations: * @@ -67,18 +126,24 @@ void local_flush_tlb_mm(struct mm_struct *mm) } EXPORT_SYMBOL(local_flush_tlb_mm); -void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr) +void __local_flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr, + int tsize, int ind) { unsigned int pid; preempt_disable(); - pid = vma ? vma->vm_mm->context.id : 0; + pid = mm ? mm->context.id : 0; if (pid != MMU_NO_CONTEXT) - _tlbil_va(vmaddr, pid); + _tlbil_va(vmaddr, pid, tsize, ind); preempt_enable(); } -EXPORT_SYMBOL(local_flush_tlb_page); +void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr) +{ + __local_flush_tlb_page(vma ? vma->vm_mm : NULL, vmaddr, + mmu_get_tsize(mmu_virtual_psize), 0); +} +EXPORT_SYMBOL(local_flush_tlb_page); /* * And here are the SMP non-local implementations @@ -87,9 +152,17 @@ EXPORT_SYMBOL(local_flush_tlb_page); static DEFINE_SPINLOCK(tlbivax_lock); +static int mm_is_core_local(struct mm_struct *mm) +{ + return cpumask_subset(mm_cpumask(mm), + topology_thread_cpumask(smp_processor_id())); +} + struct tlb_flush_param { unsigned long addr; unsigned int pid; + unsigned int tsize; + unsigned int ind; }; static void do_flush_tlb_mm_ipi(void *param) @@ -103,7 +176,7 @@ static void do_flush_tlb_page_ipi(void *param) { struct tlb_flush_param *p = param; - _tlbil_va(p->addr, p->pid); + _tlbil_va(p->addr, p->pid, p->tsize, p->ind); } @@ -131,7 +204,7 @@ void flush_tlb_mm(struct mm_struct *mm) pid = mm->context.id; if (unlikely(pid == MMU_NO_CONTEXT)) goto no_context; - if (!cpumask_equal(mm_cpumask(mm), cpumask_of(smp_processor_id()))) { + if (!mm_is_core_local(mm)) { struct tlb_flush_param p = { .pid = pid }; /* Ignores smp_processor_id() even if set. */ smp_call_function_many(mm_cpumask(mm), @@ -143,37 +216,49 @@ void flush_tlb_mm(struct mm_struct *mm) } EXPORT_SYMBOL(flush_tlb_mm); -void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr) +void __flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr, + int tsize, int ind) { struct cpumask *cpu_mask; unsigned int pid; preempt_disable(); - pid = vma ? vma->vm_mm->context.id : 0; + pid = mm ? mm->context.id : 0; if (unlikely(pid == MMU_NO_CONTEXT)) goto bail; - cpu_mask = mm_cpumask(vma->vm_mm); - if (!cpumask_equal(cpu_mask, cpumask_of(smp_processor_id()))) { + cpu_mask = mm_cpumask(mm); + if (!mm_is_core_local(mm)) { /* If broadcast tlbivax is supported, use it */ if (mmu_has_feature(MMU_FTR_USE_TLBIVAX_BCAST)) { int lock = mmu_has_feature(MMU_FTR_LOCK_BCAST_INVAL); if (lock) spin_lock(&tlbivax_lock); - _tlbivax_bcast(vmaddr, pid); + _tlbivax_bcast(vmaddr, pid, tsize, ind); if (lock) spin_unlock(&tlbivax_lock); goto bail; } else { - struct tlb_flush_param p = { .pid = pid, .addr = vmaddr }; + struct tlb_flush_param p = { + .pid = pid, + .addr = vmaddr, + .tsize = tsize, + .ind = ind, + }; /* Ignores smp_processor_id() even if set in cpu_mask */ smp_call_function_many(cpu_mask, do_flush_tlb_page_ipi, &p, 1); } } - _tlbil_va(vmaddr, pid); + _tlbil_va(vmaddr, pid, tsize, ind); bail: preempt_enable(); } + +void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr) +{ + __flush_tlb_page(vma ? vma->vm_mm : NULL, vmaddr, + mmu_get_tsize(mmu_virtual_psize), 0); +} EXPORT_SYMBOL(flush_tlb_page); #endif /* CONFIG_SMP */ @@ -207,3 +292,156 @@ void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, flush_tlb_mm(vma->vm_mm); } EXPORT_SYMBOL(flush_tlb_range); + +void tlb_flush(struct mmu_gather *tlb) +{ + flush_tlb_mm(tlb->mm); + + /* Push out batch of freed page tables */ + pte_free_finish(); +} + +/* + * Below are functions specific to the 64-bit variant of Book3E though that + * may change in the future + */ + +#ifdef CONFIG_PPC64 + +/* + * Handling of virtual linear page tables or indirect TLB entries + * flushing when PTE pages are freed + */ +void tlb_flush_pgtable(struct mmu_gather *tlb, unsigned long address) +{ + int tsize = mmu_psize_defs[mmu_pte_psize].enc; + + if (book3e_htw_enabled) { + unsigned long start = address & PMD_MASK; + unsigned long end = address + PMD_SIZE; + unsigned long size = 1UL << mmu_psize_defs[mmu_pte_psize].shift; + + /* This isn't the most optimal, ideally we would factor out the + * while preempt & CPU mask mucking around, or even the IPI but + * it will do for now + */ + while (start < end) { + __flush_tlb_page(tlb->mm, start, tsize, 1); + start += size; + } + } else { + unsigned long rmask = 0xf000000000000000ul; + unsigned long rid = (address & rmask) | 0x1000000000000000ul; + unsigned long vpte = address & ~rmask; + +#ifdef CONFIG_PPC_64K_PAGES + vpte = (vpte >> (PAGE_SHIFT - 4)) & ~0xfffful; +#else + vpte = (vpte >> (PAGE_SHIFT - 3)) & ~0xffful; +#endif + vpte |= rid; + __flush_tlb_page(tlb->mm, vpte, tsize, 0); + } +} + +/* + * Early initialization of the MMU TLB code + */ +static void __early_init_mmu(int boot_cpu) +{ + extern unsigned int interrupt_base_book3e; + extern unsigned int exc_data_tlb_miss_htw_book3e; + extern unsigned int exc_instruction_tlb_miss_htw_book3e; + + unsigned int *ibase = &interrupt_base_book3e; + unsigned int mas4; + + /* XXX This will have to be decided at runtime, but right + * now our boot and TLB miss code hard wires it. Ideally + * we should find out a suitable page size and patch the + * TLB miss code (either that or use the PACA to store + * the value we want) + */ + mmu_linear_psize = MMU_PAGE_1G; + + /* XXX This should be decided at runtime based on supported + * page sizes in the TLB, but for now let's assume 16M is + * always there and a good fit (which it probably is) + */ + mmu_vmemmap_psize = MMU_PAGE_16M; + + /* Check if HW tablewalk is present, and if yes, enable it by: + * + * - patching the TLB miss handlers to branch to the + * one dedicates to it + * + * - setting the global book3e_htw_enabled + * + * - Set MAS4:INDD and default page size + */ + + /* XXX This code only checks for TLB 0 capabilities and doesn't + * check what page size combos are supported by the HW. It + * also doesn't handle the case where a separate array holds + * the IND entries from the array loaded by the PT. + */ + if (boot_cpu) { + unsigned int tlb0cfg = mfspr(SPRN_TLB0CFG); + + /* Check if HW loader is supported */ + if ((tlb0cfg & TLBnCFG_IND) && + (tlb0cfg & TLBnCFG_PT)) { + patch_branch(ibase + (0x1c0 / 4), + (unsigned long)&exc_data_tlb_miss_htw_book3e, 0); + patch_branch(ibase + (0x1e0 / 4), + (unsigned long)&exc_instruction_tlb_miss_htw_book3e, 0); + book3e_htw_enabled = 1; + } + pr_info("MMU: Book3E Page Tables %s\n", + book3e_htw_enabled ? "Enabled" : "Disabled"); + } + + /* Set MAS4 based on page table setting */ + + mas4 = 0x4 << MAS4_WIMGED_SHIFT; + if (book3e_htw_enabled) { + mas4 |= mas4 | MAS4_INDD; +#ifdef CONFIG_PPC_64K_PAGES + mas4 |= BOOK3E_PAGESZ_256M << MAS4_TSIZED_SHIFT; + mmu_pte_psize = MMU_PAGE_256M; +#else + mas4 |= BOOK3E_PAGESZ_1M << MAS4_TSIZED_SHIFT; + mmu_pte_psize = MMU_PAGE_1M; +#endif + } else { +#ifdef CONFIG_PPC_64K_PAGES + mas4 |= BOOK3E_PAGESZ_64K << MAS4_TSIZED_SHIFT; +#else + mas4 |= BOOK3E_PAGESZ_4K << MAS4_TSIZED_SHIFT; +#endif + mmu_pte_psize = mmu_virtual_psize; + } + mtspr(SPRN_MAS4, mas4); + + /* Set the global containing the top of the linear mapping + * for use by the TLB miss code + */ + linear_map_top = lmb_end_of_DRAM(); + + /* A sync won't hurt us after mucking around with + * the MMU configuration + */ + mb(); +} + +void __init early_init_mmu(void) +{ + __early_init_mmu(1); +} + +void __cpuinit early_init_mmu_secondary(void) +{ + __early_init_mmu(0); +} + +#endif /* CONFIG_PPC64 */ diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S index 3037911279b1..bbdc5b577b85 100644 --- a/arch/powerpc/mm/tlb_nohash_low.S +++ b/arch/powerpc/mm/tlb_nohash_low.S @@ -39,7 +39,7 @@ /* * 40x implementation needs only tlbil_va */ -_GLOBAL(_tlbil_va) +_GLOBAL(__tlbil_va) /* We run the search with interrupts disabled because we have to change * the PID and I don't want to preempt when that happens. */ @@ -71,7 +71,7 @@ _GLOBAL(_tlbil_va) * 440 implementation uses tlbsx/we for tlbil_va and a full sweep * of the TLB for everything else. */ -_GLOBAL(_tlbil_va) +_GLOBAL(__tlbil_va) mfspr r5,SPRN_MMUCR rlwimi r5,r4,0,24,31 /* Set TID */ @@ -124,8 +124,6 @@ _GLOBAL(_tlbil_pid) * to have the larger code path before the _SECTION_ELSE */ -#define MMUCSR0_TLBFI (MMUCSR0_TLB0FI | MMUCSR0_TLB1FI | \ - MMUCSR0_TLB2FI | MMUCSR0_TLB3FI) /* * Flush MMU TLB on the local processor */ @@ -170,7 +168,7 @@ ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_USE_TLBILX) * Flush MMU TLB for a particular address, but only on the local processor * (no broadcast) */ -_GLOBAL(_tlbil_va) +_GLOBAL(__tlbil_va) mfmsr r10 wrteei 0 slwi r4,r4,16 @@ -191,6 +189,85 @@ ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX) isync 1: wrtee r10 blr +#elif defined(CONFIG_PPC_BOOK3E) +/* + * New Book3E (>= 2.06) implementation + * + * Note: We may be able to get away without the interrupt masking stuff + * if we save/restore MAS6 on exceptions that might modify it + */ +_GLOBAL(_tlbil_pid) + slwi r4,r3,MAS6_SPID_SHIFT + mfmsr r10 + wrteei 0 + mtspr SPRN_MAS6,r4 + PPC_TLBILX_PID(0,0) + wrtee r10 + msync + isync + blr + +_GLOBAL(_tlbil_pid_noind) + slwi r4,r3,MAS6_SPID_SHIFT + mfmsr r10 + ori r4,r4,MAS6_SIND + wrteei 0 + mtspr SPRN_MAS6,r4 + PPC_TLBILX_PID(0,0) + wrtee r10 + msync + isync + blr + +_GLOBAL(_tlbil_all) + PPC_TLBILX_ALL(0,0) + msync + isync + blr + +_GLOBAL(_tlbil_va) + mfmsr r10 + wrteei 0 + cmpwi cr0,r6,0 + slwi r4,r4,MAS6_SPID_SHIFT + rlwimi r4,r5,MAS6_ISIZE_SHIFT,MAS6_ISIZE_MASK + beq 1f + rlwimi r4,r6,MAS6_SIND_SHIFT,MAS6_SIND +1: mtspr SPRN_MAS6,r4 /* assume AS=0 for now */ + PPC_TLBILX_VA(0,r3) + msync + isync + wrtee r10 + blr + +_GLOBAL(_tlbivax_bcast) + mfmsr r10 + wrteei 0 + cmpwi cr0,r6,0 + slwi r4,r4,MAS6_SPID_SHIFT + rlwimi r4,r5,MAS6_ISIZE_SHIFT,MAS6_ISIZE_MASK + beq 1f + rlwimi r4,r6,MAS6_SIND_SHIFT,MAS6_SIND +1: mtspr SPRN_MAS6,r4 /* assume AS=0 for now */ + PPC_TLBIVAX(0,r3) + eieio + tlbsync + sync + wrtee r10 + blr + +_GLOBAL(set_context) +#ifdef CONFIG_BDI_SWITCH + /* Context switch the PTE pointer for the Abatron BDI2000. + * The PGDIR is the second parameter. + */ + lis r5, abatron_pteptrs@h + ori r5, r5, abatron_pteptrs@l + stw r4, 0x4(r5) +#endif + mtspr SPRN_PID,r3 + isync /* Force context change */ + blr #else #error Unsupported processor type ! #endif diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig index a6e43cb6f825..ec64264f7a50 100644 --- a/arch/powerpc/platforms/40x/Kconfig +++ b/arch/powerpc/platforms/40x/Kconfig @@ -40,6 +40,16 @@ config HCU4 help This option enables support for the Nestal Maschinen HCU4 board. +config HOTFOOT + bool "Hotfoot" + depends on 40x + default n + select 405EP + select PPC40x_SIMPLE + select PCI + help + This option enables support for the ESTEEM 195E Hotfoot board. + config KILAUEA bool "Kilauea" depends on 40x diff --git a/arch/powerpc/platforms/40x/ppc40x_simple.c b/arch/powerpc/platforms/40x/ppc40x_simple.c index 5fd5a5974001..546bbc229d19 100644 --- a/arch/powerpc/platforms/40x/ppc40x_simple.c +++ b/arch/powerpc/platforms/40x/ppc40x_simple.c @@ -54,7 +54,8 @@ static char *board[] __initdata = { "amcc,acadia", "amcc,haleakala", "amcc,kilauea", - "amcc,makalu" + "amcc,makalu", + "est,hotfoot" }; static int __init ppc40x_probe(void) diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index 90e3192611a4..7486bffd3ebb 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -129,6 +129,18 @@ config REDWOOD help This option enables support for the AMCC PPC460SX Redwood board. +config EIGER + bool "Eiger" + depends on 44x + default n + select PPC44x_SIMPLE + select 460SX + select PCI + select PPC4xx_PCI_EXPRESS + select IBM_NEW_EMAC_RGMII + help + This option enables support for the AMCC PPC460SX evaluation board. + config YOSEMITE bool "Yosemite" depends on 44x diff --git a/arch/powerpc/platforms/44x/ppc44x_simple.c b/arch/powerpc/platforms/44x/ppc44x_simple.c index 5bcd441885e8..e8c23ccaa1fc 100644 --- a/arch/powerpc/platforms/44x/ppc44x_simple.c +++ b/arch/powerpc/platforms/44x/ppc44x_simple.c @@ -55,6 +55,7 @@ static char *board[] __initdata = { "amcc,canyonlands", "amcc,glacier", "ibm,ebony", + "amcc,eiger", "amcc,katmai", "amcc,rainier", "amcc,redwood", diff --git a/arch/powerpc/platforms/82xx/mgcoge.c b/arch/powerpc/platforms/82xx/mgcoge.c index c2af169c1d1d..7a5de9eb3c73 100644 --- a/arch/powerpc/platforms/82xx/mgcoge.c +++ b/arch/powerpc/platforms/82xx/mgcoge.c @@ -50,16 +50,63 @@ struct cpm_pin { static __initdata struct cpm_pin mgcoge_pins[] = { /* SMC2 */ - {1, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 9, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {0, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {0, 9, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, /* SCC4 */ - {3, 25, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {3, 24, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {3, 9, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {3, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {4, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {4, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {2, 25, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {2, 24, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {2, 9, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {2, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {3, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {3, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + + /* FCC1 */ + {0, 14, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {0, 15, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {0, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {0, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {0, 18, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {0, 19, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {0, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {0, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {0, 26, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, + {0, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, + {0, 28, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {0, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {0, 30, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, + {0, 31, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, + + {2, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {2, 23, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + + /* FCC2 */ + {1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + + {2, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {2, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + + /* MDC */ + {0, 13, CPM_PIN_OUTPUT | CPM_PIN_GPIO}, + +#if defined(CONFIG_I2C_CPM) + /* I2C */ + {3, 14, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN}, + {3, 15, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN}, +#endif }; static void __init init_ioports(void) @@ -68,12 +115,16 @@ static void __init init_ioports(void) for (i = 0; i < ARRAY_SIZE(mgcoge_pins); i++) { const struct cpm_pin *pin = &mgcoge_pins[i]; - cpm2_set_pin(pin->port - 1, pin->pin, pin->flags); + cpm2_set_pin(pin->port, pin->pin, pin->flags); } cpm2_smc_clk_setup(CPM_CLK_SMC2, CPM_BRG8); cpm2_clk_setup(CPM_CLK_SCC4, CPM_CLK7, CPM_CLK_RX); cpm2_clk_setup(CPM_CLK_SCC4, CPM_CLK8, CPM_CLK_TX); + cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK10, CPM_CLK_RX); + cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK9, CPM_CLK_TX); + cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX); + cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX); } static void __init mgcoge_setup_arch(void) diff --git a/arch/powerpc/platforms/82xx/mpc8272_ads.c b/arch/powerpc/platforms/82xx/mpc8272_ads.c index 8054c685d323..30394b409b3f 100644 --- a/arch/powerpc/platforms/82xx/mpc8272_ads.c +++ b/arch/powerpc/platforms/82xx/mpc8272_ads.c @@ -29,7 +29,6 @@ #include <sysdev/fsl_soc.h> #include <sysdev/cpm2_pic.h> -#include "pq2ads.h" #include "pq2.h" static void __init mpc8272_ads_pic_init(void) @@ -100,6 +99,15 @@ static struct cpm_pin mpc8272_ads_pins[] = { /* I2C */ {3, 14, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN}, {3, 15, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN}, + + /* USB */ + {2, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {2, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {2, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {2, 24, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {3, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {3, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {3, 25, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, }; static void __init init_ioports(void) @@ -113,6 +121,8 @@ static void __init init_ioports(void) cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX); cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX); + cpm2_clk_setup(CPM_CLK_SCC3, CPM_CLK8, CPM_CLK_RX); + cpm2_clk_setup(CPM_CLK_SCC3, CPM_CLK8, CPM_CLK_TX); cpm2_clk_setup(CPM_CLK_SCC4, CPM_BRG4, CPM_CLK_RX); cpm2_clk_setup(CPM_CLK_SCC4, CPM_BRG4, CPM_CLK_TX); cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK11, CPM_CLK_RX); @@ -144,12 +154,22 @@ static void __init mpc8272_ads_setup_arch(void) return; } +#define BCSR1_FETHIEN 0x08000000 +#define BCSR1_FETH_RST 0x04000000 +#define BCSR1_RS232_EN1 0x02000000 +#define BCSR1_RS232_EN2 0x01000000 +#define BCSR3_USB_nEN 0x80000000 +#define BCSR3_FETHIEN2 0x10000000 +#define BCSR3_FETH2_RST 0x08000000 + clrbits32(&bcsr[1], BCSR1_RS232_EN1 | BCSR1_RS232_EN2 | BCSR1_FETHIEN); setbits32(&bcsr[1], BCSR1_FETH_RST); clrbits32(&bcsr[3], BCSR3_FETHIEN2); setbits32(&bcsr[3], BCSR3_FETH2_RST); + clrbits32(&bcsr[3], BCSR3_USB_nEN); + iounmap(bcsr); init_ioports(); diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig index 083ebee9a16d..f49a2548c5ff 100644 --- a/arch/powerpc/platforms/83xx/Kconfig +++ b/arch/powerpc/platforms/83xx/Kconfig @@ -75,11 +75,11 @@ config MPC837x_MDS This option enables support for the MPC837x MDS Processor Board. config MPC837x_RDB - bool "Freescale MPC837x RDB" + bool "Freescale MPC837x RDB/WLAN" select DEFAULT_UIMAGE select PPC_MPC837x help - This option enables support for the MPC837x RDB Board. + This option enables support for the MPC837x RDB and WLAN Boards. config SBC834x bool "Wind River SBC834x" diff --git a/arch/powerpc/platforms/83xx/mpc837x_rdb.c b/arch/powerpc/platforms/83xx/mpc837x_rdb.c index 76f3b32a155e..a1908d261240 100644 --- a/arch/powerpc/platforms/83xx/mpc837x_rdb.c +++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c @@ -17,10 +17,32 @@ #include <asm/time.h> #include <asm/ipic.h> #include <asm/udbg.h> +#include <sysdev/fsl_soc.h> #include <sysdev/fsl_pci.h> #include "mpc83xx.h" +static void mpc837x_rdb_sd_cfg(void) +{ + void __iomem *im; + + im = ioremap(get_immrbase(), 0x1000); + if (!im) { + WARN_ON(1); + return; + } + + /* + * On RDB boards (in contrast to MDS) USBB pins are used for SD only, + * so we can safely mux them away from the USB block. + */ + clrsetbits_be32(im + MPC83XX_SICRL_OFFS, MPC837X_SICRL_USBB_MASK, + MPC837X_SICRL_SD); + clrsetbits_be32(im + MPC83XX_SICRH_OFFS, MPC837X_SICRH_SPI_MASK, + MPC837X_SICRH_SD); + iounmap(im); +} + /* ************************************************************************ * * Setup the architecture @@ -42,6 +64,7 @@ static void __init mpc837x_rdb_setup_arch(void) mpc83xx_add_bridge(np); #endif mpc837x_usb_cfg(); + mpc837x_rdb_sd_cfg(); } static struct of_device_id mpc837x_ids[] = { @@ -86,11 +109,12 @@ static int __init mpc837x_rdb_probe(void) return of_flat_dt_is_compatible(root, "fsl,mpc8377rdb") || of_flat_dt_is_compatible(root, "fsl,mpc8378rdb") || - of_flat_dt_is_compatible(root, "fsl,mpc8379rdb"); + of_flat_dt_is_compatible(root, "fsl,mpc8379rdb") || + of_flat_dt_is_compatible(root, "fsl,mpc8377wlan"); } define_machine(mpc837x_rdb) { - .name = "MPC837x RDB", + .name = "MPC837x RDB/WLAN", .probe = mpc837x_rdb_probe, .setup_arch = mpc837x_rdb_setup_arch, .init_IRQ = mpc837x_rdb_init_IRQ, diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h index d1dc5b0b4fbf..0fea8811d45b 100644 --- a/arch/powerpc/platforms/83xx/mpc83xx.h +++ b/arch/powerpc/platforms/83xx/mpc83xx.h @@ -30,6 +30,8 @@ #define MPC8315_SICRL_USB_ULPI 0x00000054 #define MPC837X_SICRL_USB_MASK 0xf0000000 #define MPC837X_SICRL_USB_ULPI 0x50000000 +#define MPC837X_SICRL_USBB_MASK 0x30000000 +#define MPC837X_SICRL_SD 0x20000000 /* system i/o configuration register high */ #define MPC83XX_SICRH_OFFS 0x118 @@ -38,6 +40,8 @@ #define MPC831X_SICRH_USB_ULPI 0x000000a0 #define MPC8315_SICRH_USB_MASK 0x0000ff00 #define MPC8315_SICRH_USB_ULPI 0x00000000 +#define MPC837X_SICRH_SPI_MASK 0x00000003 +#define MPC837X_SICRH_SD 0x00000001 /* USB Control Register */ #define FSL_USB2_CONTROL_OFFS 0x500 diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index a9b416688975..d3a975e8fd3e 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -55,6 +55,15 @@ config MPC85xx_DS help This option enables support for the MPC85xx DS (MPC8544 DS) board +config MPC85xx_RDB + bool "Freescale MPC85xx RDB" + select PPC_I8259 + select DEFAULT_UIMAGE + select FSL_ULI1575 + select SWIOTLB + help + This option enables support for the MPC85xx RDB (P2020 RDB) board + config SOCRATES bool "Socrates" select DEFAULT_UIMAGE diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index 835733f2b12c..9098aea0cf32 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -9,10 +9,11 @@ obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o obj-$(CONFIG_MPC8536_DS) += mpc8536_ds.o obj-$(CONFIG_MPC85xx_DS) += mpc85xx_ds.o obj-$(CONFIG_MPC85xx_MDS) += mpc85xx_mds.o +obj-$(CONFIG_MPC85xx_RDB) += mpc85xx_rdb.o obj-$(CONFIG_STX_GP3) += stx_gp3.o obj-$(CONFIG_TQM85xx) += tqm85xx.o obj-$(CONFIG_SBC8560) += sbc8560.o obj-$(CONFIG_SBC8548) += sbc8548.o obj-$(CONFIG_SOCRATES) += socrates.o socrates_fpga_pic.o obj-$(CONFIG_KSI8560) += ksi8560.o -obj-$(CONFIG_XES_MPC85xx) += xes_mpc85xx.o
\ No newline at end of file +obj-$(CONFIG_XES_MPC85xx) += xes_mpc85xx.o diff --git a/arch/powerpc/platforms/85xx/mpc8536_ds.c b/arch/powerpc/platforms/85xx/mpc8536_ds.c index 055ff417bae9..004b7d36cdb7 100644 --- a/arch/powerpc/platforms/85xx/mpc8536_ds.c +++ b/arch/powerpc/platforms/85xx/mpc8536_ds.c @@ -96,7 +96,8 @@ static void __init mpc8536_ds_setup_arch(void) #ifdef CONFIG_SWIOTLB if (lmb_end_of_DRAM() > max) { ppc_swiotlb_enable = 1; - set_pci_dma_ops(&swiotlb_pci_dma_ops); + set_pci_dma_ops(&swiotlb_dma_ops); + ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb; } #endif diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c index 849c0ac0025f..544011a562fb 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c @@ -192,7 +192,8 @@ static void __init mpc85xx_ds_setup_arch(void) #ifdef CONFIG_SWIOTLB if (lmb_end_of_DRAM() > max) { ppc_swiotlb_enable = 1; - set_pci_dma_ops(&swiotlb_pci_dma_ops); + set_pci_dma_ops(&swiotlb_dma_ops); + ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb; } #endif diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index bfb32834ab0c..3909d57b86e3 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -47,6 +47,7 @@ #include <asm/udbg.h> #include <sysdev/fsl_soc.h> #include <sysdev/fsl_pci.h> +#include <sysdev/simple_gpio.h> #include <asm/qe.h> #include <asm/qe_ic.h> #include <asm/mpic.h> @@ -254,7 +255,8 @@ static void __init mpc85xx_mds_setup_arch(void) #ifdef CONFIG_SWIOTLB if (lmb_end_of_DRAM() > max) { ppc_swiotlb_enable = 1; - set_pci_dma_ops(&swiotlb_pci_dma_ops); + set_pci_dma_ops(&swiotlb_dma_ops); + ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb; } #endif } @@ -304,6 +306,9 @@ static struct of_device_id mpc85xx_ids[] = { static int __init mpc85xx_publish_devices(void) { + if (machine_is(mpc8569_mds)) + simple_gpiochip_init("fsl,mpc8569mds-bcsr-gpio"); + /* Publish the QE devices */ of_platform_bus_probe(NULL, mpc85xx_ids, NULL); diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c new file mode 100644 index 000000000000..c8468de4acf6 --- /dev/null +++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c @@ -0,0 +1,141 @@ +/* + * MPC85xx RDB Board Setup + * + * Copyright 2009 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/delay.h> +#include <linux/seq_file.h> +#include <linux/interrupt.h> +#include <linux/of_platform.h> + +#include <asm/system.h> +#include <asm/time.h> +#include <asm/machdep.h> +#include <asm/pci-bridge.h> +#include <mm/mmu_decl.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <asm/mpic.h> + +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> + +#undef DEBUG + +#ifdef DEBUG +#define DBG(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args) +#else +#define DBG(fmt, args...) +#endif + + +void __init mpc85xx_rdb_pic_init(void) +{ + struct mpic *mpic; + struct resource r; + struct device_node *np; + + np = of_find_node_by_type(NULL, "open-pic"); + if (np == NULL) { + printk(KERN_ERR "Could not find open-pic node\n"); + return; + } + + if (of_address_to_resource(np, 0, &r)) { + printk(KERN_ERR "Failed to map mpic register space\n"); + of_node_put(np); + return; + } + + mpic = mpic_alloc(np, r.start, + MPIC_PRIMARY | MPIC_WANTS_RESET | + MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS | + MPIC_SINGLE_DEST_CPU, + 0, 256, " OpenPIC "); + + BUG_ON(mpic == NULL); + of_node_put(np); + + mpic_init(mpic); + +} + +/* + * Setup the architecture + */ +#ifdef CONFIG_SMP +extern void __init mpc85xx_smp_init(void); +#endif +static void __init mpc85xx_rdb_setup_arch(void) +{ +#ifdef CONFIG_PCI + struct device_node *np; +#endif + + if (ppc_md.progress) + ppc_md.progress("mpc85xx_rdb_setup_arch()", 0); + +#ifdef CONFIG_PCI + for_each_node_by_type(np, "pci") { + if (of_device_is_compatible(np, "fsl,mpc8548-pcie")) + fsl_add_bridge(np, 0); + } + +#endif + +#ifdef CONFIG_SMP + mpc85xx_smp_init(); +#endif + + printk(KERN_INFO "MPC85xx RDB board from Freescale Semiconductor\n"); +} + +static struct of_device_id __initdata mpc85xxrdb_ids[] = { + { .type = "soc", }, + { .compatible = "soc", }, + { .compatible = "simple-bus", }, + { .compatible = "gianfar", }, + {}, +}; + +static int __init mpc85xxrdb_publish_devices(void) +{ + return of_platform_bus_probe(NULL, mpc85xxrdb_ids, NULL); +} +machine_device_initcall(p2020_rdb, mpc85xxrdb_publish_devices); + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init p2020_rdb_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (of_flat_dt_is_compatible(root, "fsl,P2020RDB")) + return 1; + return 0; +} + +define_machine(p2020_rdb) { + .name = "P2020 RDB", + .probe = p2020_rdb_probe, + .setup_arch = mpc85xx_rdb_setup_arch, + .init_IRQ = mpc85xx_rdb_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/85xx/sbc8560.c b/arch/powerpc/platforms/85xx/sbc8560.c index cc27807a8b64..a5ad1c7794bf 100644 --- a/arch/powerpc/platforms/85xx/sbc8560.c +++ b/arch/powerpc/platforms/85xx/sbc8560.c @@ -267,6 +267,43 @@ arch_initcall(sbc8560_rtc_init); #endif /* M48T59 */ +static __u8 __iomem *brstcr; + +static int __init sbc8560_bdrstcr_init(void) +{ + struct device_node *np; + struct resource res; + + np = of_find_compatible_node(NULL, NULL, "wrs,sbc8560-brstcr"); + if (np == NULL) { + printk(KERN_WARNING "sbc8560: No board specific RSTCR in DTB.\n"); + return -ENODEV; + } + + of_address_to_resource(np, 0, &res); + + printk(KERN_INFO "sbc8560: Found BRSTCR at i/o 0x%x\n", res.start); + + brstcr = ioremap(res.start, res.end - res.start); + if(!brstcr) + printk(KERN_WARNING "sbc8560: ioremap of brstcr failed.\n"); + + of_node_put(np); + + return 0; +} + +arch_initcall(sbc8560_bdrstcr_init); + +void sbc8560_rstcr_restart(char * cmd) +{ + local_irq_disable(); + if(brstcr) + clrbits8(brstcr, 0x80); + + while(1); +} + define_machine(sbc8560) { .name = "SBC8560", .probe = sbc8560_probe, @@ -274,7 +311,7 @@ define_machine(sbc8560) { .init_IRQ = sbc8560_pic_init, .show_cpuinfo = sbc8560_show_cpuinfo, .get_irq = mpic_get_irq, - .restart = fsl_rstcr_restart, + .restart = sbc8560_rstcr_restart, .calibrate_decr = generic_calibrate_decr, .progress = udbg_progress, }; diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c index 62c592ede641..04160a4cc699 100644 --- a/arch/powerpc/platforms/85xx/smp.c +++ b/arch/powerpc/platforms/85xx/smp.c @@ -25,7 +25,6 @@ #include <sysdev/fsl_soc.h> -extern volatile unsigned long __secondary_hold_acknowledge; extern void __early_start(void); #define BOOT_ENTRY_ADDR_UPPER 0 @@ -80,46 +79,24 @@ smp_85xx_kick_cpu(int nr) } static void __init -smp_85xx_basic_setup(int cpu_nr) -{ - /* Clear any pending timer interrupts */ - mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS); - - /* Enable decrementer interrupt */ - mtspr(SPRN_TCR, TCR_DIE); -} - -static void __init smp_85xx_setup_cpu(int cpu_nr) { mpic_setup_this_cpu(); - - smp_85xx_basic_setup(cpu_nr); } struct smp_ops_t smp_85xx_ops = { .kick_cpu = smp_85xx_kick_cpu, }; -static int __init smp_dummy_probe(void) -{ - return NR_CPUS; -} - void __init mpc85xx_smp_init(void) { struct device_node *np; - smp_85xx_ops.message_pass = NULL; - np = of_find_node_by_type(NULL, "open-pic"); if (np) { smp_85xx_ops.probe = smp_mpic_probe; smp_85xx_ops.setup_cpu = smp_85xx_setup_cpu; smp_85xx_ops.message_pass = smp_mpic_message_pass; - } else { - smp_85xx_ops.probe = smp_dummy_probe; - smp_85xx_ops.setup_cpu = smp_85xx_basic_setup; } if (cpu_has_feature(CPU_FTR_DBELL)) diff --git a/arch/powerpc/platforms/86xx/gef_ppc9a.c b/arch/powerpc/platforms/86xx/gef_ppc9a.c index 2efa052975e6..287f7bd17dd9 100644 --- a/arch/powerpc/platforms/86xx/gef_ppc9a.c +++ b/arch/powerpc/platforms/86xx/gef_ppc9a.c @@ -102,8 +102,8 @@ static unsigned int gef_ppc9a_get_pcb_rev(void) { unsigned int reg; - reg = ioread32(ppc9a_regs); - return (reg >> 8) & 0xff; + reg = ioread32be(ppc9a_regs); + return (reg >> 16) & 0xff; } /* Return the board (software) revision */ @@ -111,8 +111,8 @@ static unsigned int gef_ppc9a_get_board_rev(void) { unsigned int reg; - reg = ioread32(ppc9a_regs); - return (reg >> 16) & 0xff; + reg = ioread32be(ppc9a_regs); + return (reg >> 8) & 0xff; } /* Return the FPGA revision */ @@ -120,8 +120,26 @@ static unsigned int gef_ppc9a_get_fpga_rev(void) { unsigned int reg; - reg = ioread32(ppc9a_regs); - return (reg >> 24) & 0xf; + reg = ioread32be(ppc9a_regs); + return reg & 0xf; +} + +/* Return VME Geographical Address */ +static unsigned int gef_ppc9a_get_vme_geo_addr(void) +{ + unsigned int reg; + + reg = ioread32be(ppc9a_regs + 0x4); + return reg & 0x1f; +} + +/* Return VME System Controller Status */ +static unsigned int gef_ppc9a_get_vme_is_syscon(void) +{ + unsigned int reg; + + reg = ioread32be(ppc9a_regs + 0x4); + return (reg >> 9) & 0x1; } static void gef_ppc9a_show_cpuinfo(struct seq_file *m) @@ -131,10 +149,15 @@ static void gef_ppc9a_show_cpuinfo(struct seq_file *m) seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n"); seq_printf(m, "Revision\t: %u%c\n", gef_ppc9a_get_pcb_rev(), - ('A' + gef_ppc9a_get_board_rev() - 1)); + ('A' + gef_ppc9a_get_board_rev())); seq_printf(m, "FPGA Revision\t: %u\n", gef_ppc9a_get_fpga_rev()); seq_printf(m, "SVR\t\t: 0x%x\n", svid); + + seq_printf(m, "VME geo. addr\t: %u\n", gef_ppc9a_get_vme_geo_addr()); + + seq_printf(m, "VME syscon\t: %s\n", + gef_ppc9a_get_vme_is_syscon() ? "yes" : "no"); } static void __init gef_ppc9a_nec_fixup(struct pci_dev *pdev) diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c index 66327024a6a6..2aa69a69bcc8 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c @@ -105,7 +105,8 @@ mpc86xx_hpcn_setup_arch(void) #ifdef CONFIG_SWIOTLB if (lmb_end_of_DRAM() > max) { ppc_swiotlb_enable = 1; - set_pci_dma_ops(&swiotlb_pci_dma_ops); + set_pci_dma_ops(&swiotlb_dma_ops); + ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb; } #endif } diff --git a/arch/powerpc/platforms/86xx/mpc86xx_smp.c b/arch/powerpc/platforms/86xx/mpc86xx_smp.c index d84bbb508ee7..eacea0e3fcc8 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_smp.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_smp.c @@ -27,7 +27,6 @@ #include "mpc86xx.h" extern void __secondary_start_mpc86xx(void); -extern unsigned long __secondary_hold_acknowledge; #define MCM_PORT_CONFIG_OFFSET 0x10 diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index 61187bec7506..e382cae678b8 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -57,15 +57,35 @@ config E200 endchoice -config PPC_BOOK3S_64 - def_bool y +choice + prompt "Processor Type" depends on PPC64 + help + There are two families of 64 bit PowerPC chips supported. + The most common ones are the desktop and server CPUs + (POWER3, RS64, POWER4, POWER5, POWER5+, POWER6, ...) + + The other are the "embedded" processors compliant with the + "Book 3E" variant of the architecture + +config PPC_BOOK3S_64 + bool "Server processors" select PPC_FPU +config PPC_BOOK3E_64 + bool "Embedded processors" + select PPC_FPU # Make it a choice ? + +endchoice + config PPC_BOOK3S def_bool y depends on PPC_BOOK3S_32 || PPC_BOOK3S_64 +config PPC_BOOK3E + def_bool y + depends on PPC_BOOK3E_64 + config POWER4_ONLY bool "Optimize for POWER4" depends on PPC64 && PPC_BOOK3S @@ -125,7 +145,7 @@ config 4xx config BOOKE bool - depends on E200 || E500 || 44x + depends on E200 || E500 || 44x || PPC_BOOK3E default y config FSL_BOOKE @@ -223,9 +243,17 @@ config PPC_MMU_NOHASH def_bool y depends on !PPC_STD_MMU +config PPC_MMU_NOHASH_32 + def_bool y + depends on PPC_MMU_NOHASH && PPC32 + +config PPC_MMU_NOHASH_64 + def_bool y + depends on PPC_MMU_NOHASH && PPC64 + config PPC_BOOK3E_MMU def_bool y - depends on FSL_BOOKE + depends on FSL_BOOKE || PPC_BOOK3E config PPC_MM_SLICES bool @@ -252,12 +280,12 @@ config PPC_HAVE_PMU_SUPPORT config PPC_PERF_CTRS def_bool y - depends on PERF_COUNTERS && PPC_HAVE_PMU_SUPPORT + depends on PERF_EVENTS && PPC_HAVE_PMU_SUPPORT help - This enables the powerpc-specific perf_counter back-end. + This enables the powerpc-specific perf_event back-end. config SMP - depends on PPC_STD_MMU || FSL_BOOKE + depends on PPC_BOOK3S || PPC_BOOK3E || FSL_BOOKE bool "Symmetric multi-processing support" ---help--- This enables support for systems with more than one CPU. If you have diff --git a/arch/powerpc/platforms/amigaone/setup.c b/arch/powerpc/platforms/amigaone/setup.c index 443035366c12..9290a7a442d0 100644 --- a/arch/powerpc/platforms/amigaone/setup.c +++ b/arch/powerpc/platforms/amigaone/setup.c @@ -110,13 +110,16 @@ void __init amigaone_init_IRQ(void) irq_set_default_host(i8259_get_host()); } -void __init amigaone_init(void) +static int __init request_isa_regions(void) { request_region(0x00, 0x20, "dma1"); request_region(0x40, 0x20, "timer"); request_region(0x80, 0x10, "dma page reg"); request_region(0xc0, 0x20, "dma2"); + + return 0; } +machine_device_initcall(amigaone, request_isa_regions); void amigaone_restart(char *cmd) { @@ -161,7 +164,6 @@ define_machine(amigaone) { .name = "AmigaOne", .probe = amigaone_probe, .setup_arch = amigaone_setup_arch, - .init = amigaone_init, .show_cpuinfo = amigaone_show_cpuinfo, .init_IRQ = amigaone_init_IRQ, .restart = amigaone_restart, diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig index 50f17bdd3c16..48cd7d2e1b75 100644 --- a/arch/powerpc/platforms/cell/Kconfig +++ b/arch/powerpc/platforms/cell/Kconfig @@ -80,13 +80,6 @@ config SPU_FS_64K_LS uses 4K pages. This can improve performances of applications using multiple SPEs by lowering the TLB pressure on them. -config SPU_TRACE - tristate "SPU event tracing support" - depends on SPU_FS && MARKERS - help - This option allows reading a trace of spu-related events through - the sputrace file in procfs. - config SPU_BASE bool default n diff --git a/arch/powerpc/platforms/cell/celleb_setup.c b/arch/powerpc/platforms/cell/celleb_setup.c index 07c234f6b2b6..e53845579770 100644 --- a/arch/powerpc/platforms/cell/celleb_setup.c +++ b/arch/powerpc/platforms/cell/celleb_setup.c @@ -80,8 +80,7 @@ static void celleb_show_cpuinfo(struct seq_file *m) static int __init celleb_machine_type_hack(char *ptr) { - strncpy(celleb_machine_type, ptr, sizeof(celleb_machine_type)); - celleb_machine_type[sizeof(celleb_machine_type)-1] = 0; + strlcpy(celleb_machine_type, ptr, sizeof(celleb_machine_type)); return 0; } diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index 5b34fc211f35..416db17eb18f 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -642,7 +642,7 @@ static int dma_fixed_dma_supported(struct device *dev, u64 mask) static int dma_set_mask_and_switch(struct device *dev, u64 dma_mask); -struct dma_mapping_ops dma_iommu_fixed_ops = { +struct dma_map_ops dma_iommu_fixed_ops = { .alloc_coherent = dma_fixed_alloc_coherent, .free_coherent = dma_fixed_free_coherent, .map_sg = dma_fixed_map_sg, diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c index bc97fada48c6..f774530075b7 100644 --- a/arch/powerpc/platforms/cell/smp.c +++ b/arch/powerpc/platforms/cell/smp.c @@ -58,8 +58,6 @@ */ static cpumask_t of_spin_map; -extern void generic_secondary_smp_init(unsigned long); - /** * smp_startup_cpu() - start the given cpu * diff --git a/arch/powerpc/platforms/cell/spufs/Makefile b/arch/powerpc/platforms/cell/spufs/Makefile index 99610a6361f2..b93f877ba504 100644 --- a/arch/powerpc/platforms/cell/spufs/Makefile +++ b/arch/powerpc/platforms/cell/spufs/Makefile @@ -4,7 +4,8 @@ spufs-y += inode.o file.o context.o syscalls.o coredump.o spufs-y += sched.o backing_ops.o hw_ops.o run.o gang.o spufs-y += switch.o fault.o lscsa_alloc.o -obj-$(CONFIG_SPU_TRACE) += sputrace.o +# magic for the trace events +CFLAGS_sched.o := -I$(src) # Rules to build switch.o with the help of SPU tool chain SPU_CROSS := spu- diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index db5398c0339f..0c87bcd2452a 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -28,6 +28,7 @@ #include <asm/spu.h> #include <asm/spu_csa.h> #include "spufs.h" +#include "sputrace.h" atomic_t nr_spu_contexts = ATOMIC_INIT(0); diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index d6a519e6e1c1..8f079b865ad0 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -29,7 +29,6 @@ #include <linux/poll.h> #include <linux/ptrace.h> #include <linux/seq_file.h> -#include <linux/marker.h> #include <asm/io.h> #include <asm/time.h> @@ -38,6 +37,7 @@ #include <asm/uaccess.h> #include "spufs.h" +#include "sputrace.h" #define SPUFS_MMAP_4K (PAGE_SIZE == 0x1000) diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c index 24b30b6909c4..fc1b1c42b1dc 100644 --- a/arch/powerpc/platforms/cell/spufs/inode.c +++ b/arch/powerpc/platforms/cell/spufs/inode.c @@ -119,7 +119,7 @@ spufs_new_file(struct super_block *sb, struct dentry *dentry, const struct file_operations *fops, int mode, size_t size, struct spu_context *ctx) { - static struct inode_operations spufs_file_iops = { + static const struct inode_operations spufs_file_iops = { .setattr = spufs_setattr, }; struct inode *inode; @@ -773,7 +773,7 @@ static int spufs_fill_super(struct super_block *sb, void *data, int silent) { struct spufs_sb_info *info; - static struct super_operations s_ops = { + static const struct super_operations s_ops = { .alloc_inode = spufs_alloc_inode, .destroy_inode = spufs_destroy_inode, .statfs = simple_statfs, diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index f085369301b1..4678078fede8 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -39,7 +39,6 @@ #include <linux/pid_namespace.h> #include <linux/proc_fs.h> #include <linux/seq_file.h> -#include <linux/marker.h> #include <asm/io.h> #include <asm/mmu_context.h> @@ -47,6 +46,8 @@ #include <asm/spu_csa.h> #include <asm/spu_priv1.h> #include "spufs.h" +#define CREATE_TRACE_POINTS +#include "sputrace.h" struct spu_prio_array { DECLARE_BITMAP(bitmap, MAX_PRIO); diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index ae31573bea4a..c448bac65518 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -373,9 +373,4 @@ extern void spu_free_lscsa(struct spu_state *csa); extern void spuctx_switch_state(struct spu_context *ctx, enum spu_utilization_state new_state); -#define spu_context_trace(name, ctx, spu) \ - trace_mark(name, "ctx %p spu %p", ctx, spu); -#define spu_context_nospu_trace(name, ctx) \ - trace_mark(name, "ctx %p", ctx); - #endif diff --git a/arch/powerpc/platforms/cell/spufs/sputrace.c b/arch/powerpc/platforms/cell/spufs/sputrace.c deleted file mode 100644 index d0b1f3f4d9c8..000000000000 --- a/arch/powerpc/platforms/cell/spufs/sputrace.c +++ /dev/null @@ -1,272 +0,0 @@ -/* - * Copyright (C) 2007 IBM Deutschland Entwicklung GmbH - * Released under GPL v2. - * - * Partially based on net/ipv4/tcp_probe.c. - * - * Simple tracing facility for spu contexts. - */ -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/marker.h> -#include <linux/proc_fs.h> -#include <linux/wait.h> -#include <asm/atomic.h> -#include <asm/uaccess.h> -#include "spufs.h" - -struct spu_probe { - const char *name; - const char *format; - marker_probe_func *probe_func; -}; - -struct sputrace { - ktime_t tstamp; - int owner_tid; /* owner */ - int curr_tid; - const char *name; - int number; -}; - -static int bufsize __read_mostly = 16384; -MODULE_PARM_DESC(bufsize, "Log buffer size (number of records)"); -module_param(bufsize, int, 0); - - -static DEFINE_SPINLOCK(sputrace_lock); -static DECLARE_WAIT_QUEUE_HEAD(sputrace_wait); -static ktime_t sputrace_start; -static unsigned long sputrace_head, sputrace_tail; -static struct sputrace *sputrace_log; -static int sputrace_logging; - -static int sputrace_used(void) -{ - return (sputrace_head - sputrace_tail) % bufsize; -} - -static inline int sputrace_avail(void) -{ - return bufsize - sputrace_used(); -} - -static int sputrace_sprint(char *tbuf, int n) -{ - const struct sputrace *t = sputrace_log + sputrace_tail % bufsize; - struct timespec tv = - ktime_to_timespec(ktime_sub(t->tstamp, sputrace_start)); - - return snprintf(tbuf, n, - "[%lu.%09lu] %d: %s (ctxthread = %d, spu = %d)\n", - (unsigned long) tv.tv_sec, - (unsigned long) tv.tv_nsec, - t->curr_tid, - t->name, - t->owner_tid, - t->number); -} - -static ssize_t sputrace_read(struct file *file, char __user *buf, - size_t len, loff_t *ppos) -{ - int error = 0, cnt = 0; - - if (!buf || len < 0) - return -EINVAL; - - while (cnt < len) { - char tbuf[128]; - int width; - - /* If we have data ready to return, don't block waiting - * for more */ - if (cnt > 0 && sputrace_used() == 0) - break; - - error = wait_event_interruptible(sputrace_wait, - sputrace_used() > 0); - if (error) - break; - - spin_lock(&sputrace_lock); - if (sputrace_head == sputrace_tail) { - spin_unlock(&sputrace_lock); - continue; - } - - width = sputrace_sprint(tbuf, sizeof(tbuf)); - if (width < len) - sputrace_tail = (sputrace_tail + 1) % bufsize; - spin_unlock(&sputrace_lock); - - if (width >= len) - break; - - error = copy_to_user(buf + cnt, tbuf, width); - if (error) - break; - cnt += width; - } - - return cnt == 0 ? error : cnt; -} - -static int sputrace_open(struct inode *inode, struct file *file) -{ - int rc; - - spin_lock(&sputrace_lock); - if (sputrace_logging) { - rc = -EBUSY; - goto out; - } - - sputrace_logging = 1; - sputrace_head = sputrace_tail = 0; - sputrace_start = ktime_get(); - rc = 0; - -out: - spin_unlock(&sputrace_lock); - return rc; -} - -static int sputrace_release(struct inode *inode, struct file *file) -{ - spin_lock(&sputrace_lock); - sputrace_logging = 0; - spin_unlock(&sputrace_lock); - return 0; -} - -static const struct file_operations sputrace_fops = { - .owner = THIS_MODULE, - .open = sputrace_open, - .read = sputrace_read, - .release = sputrace_release, -}; - -static void sputrace_log_item(const char *name, struct spu_context *ctx, - struct spu *spu) -{ - spin_lock(&sputrace_lock); - - if (!sputrace_logging) { - spin_unlock(&sputrace_lock); - return; - } - - if (sputrace_avail() > 1) { - struct sputrace *t = sputrace_log + sputrace_head; - - t->tstamp = ktime_get(); - t->owner_tid = ctx->tid; - t->name = name; - t->curr_tid = current->pid; - t->number = spu ? spu->number : -1; - - sputrace_head = (sputrace_head + 1) % bufsize; - } else { - printk(KERN_WARNING - "sputrace: lost samples due to full buffer.\n"); - } - spin_unlock(&sputrace_lock); - - wake_up(&sputrace_wait); -} - -static void spu_context_event(void *probe_private, void *call_data, - const char *format, va_list *args) -{ - struct spu_probe *p = probe_private; - struct spu_context *ctx; - struct spu *spu; - - ctx = va_arg(*args, struct spu_context *); - spu = va_arg(*args, struct spu *); - - sputrace_log_item(p->name, ctx, spu); -} - -static void spu_context_nospu_event(void *probe_private, void *call_data, - const char *format, va_list *args) -{ - struct spu_probe *p = probe_private; - struct spu_context *ctx; - - ctx = va_arg(*args, struct spu_context *); - - sputrace_log_item(p->name, ctx, NULL); -} - -struct spu_probe spu_probes[] = { - { "spu_bind_context__enter", "ctx %p spu %p", spu_context_event }, - { "spu_unbind_context__enter", "ctx %p spu %p", spu_context_event }, - { "spu_get_idle__enter", "ctx %p", spu_context_nospu_event }, - { "spu_get_idle__found", "ctx %p spu %p", spu_context_event }, - { "spu_get_idle__not_found", "ctx %p", spu_context_nospu_event }, - { "spu_find_victim__enter", "ctx %p", spu_context_nospu_event }, - { "spusched_tick__preempt", "ctx %p spu %p", spu_context_event }, - { "spusched_tick__newslice", "ctx %p", spu_context_nospu_event }, - { "spu_yield__enter", "ctx %p", spu_context_nospu_event }, - { "spu_deactivate__enter", "ctx %p", spu_context_nospu_event }, - { "__spu_deactivate__unload", "ctx %p spu %p", spu_context_event }, - { "spufs_ps_fault__enter", "ctx %p", spu_context_nospu_event }, - { "spufs_ps_fault__sleep", "ctx %p", spu_context_nospu_event }, - { "spufs_ps_fault__wake", "ctx %p spu %p", spu_context_event }, - { "spufs_ps_fault__insert", "ctx %p spu %p", spu_context_event }, - { "spu_acquire_saved__enter", "ctx %p", spu_context_nospu_event }, - { "destroy_spu_context__enter", "ctx %p", spu_context_nospu_event }, - { "spufs_stop_callback__enter", "ctx %p spu %p", spu_context_event }, -}; - -static int __init sputrace_init(void) -{ - struct proc_dir_entry *entry; - int i, error = -ENOMEM; - - sputrace_log = kcalloc(bufsize, sizeof(struct sputrace), GFP_KERNEL); - if (!sputrace_log) - goto out; - - entry = proc_create("sputrace", S_IRUSR, NULL, &sputrace_fops); - if (!entry) - goto out_free_log; - - for (i = 0; i < ARRAY_SIZE(spu_probes); i++) { - struct spu_probe *p = &spu_probes[i]; - - error = marker_probe_register(p->name, p->format, - p->probe_func, p); - if (error) - printk(KERN_INFO "Unable to register probe %s\n", - p->name); - } - - return 0; - -out_free_log: - kfree(sputrace_log); -out: - return -ENOMEM; -} - -static void __exit sputrace_exit(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(spu_probes); i++) - marker_probe_unregister(spu_probes[i].name, - spu_probes[i].probe_func, &spu_probes[i]); - - remove_proc_entry("sputrace", NULL); - kfree(sputrace_log); - marker_synchronize_unregister(); -} - -module_init(sputrace_init); -module_exit(sputrace_exit); - -MODULE_LICENSE("GPL"); diff --git a/arch/powerpc/platforms/cell/spufs/sputrace.h b/arch/powerpc/platforms/cell/spufs/sputrace.h new file mode 100644 index 000000000000..db2656aa4103 --- /dev/null +++ b/arch/powerpc/platforms/cell/spufs/sputrace.h @@ -0,0 +1,39 @@ +#if !defined(_TRACE_SPUFS_H) || defined(TRACE_HEADER_MULTI_READ) +#define _TRACE_SPUFS_H + +#include <linux/tracepoint.h> + +#undef TRACE_SYSTEM +#define TRACE_SYSTEM spufs + +TRACE_EVENT(spufs_context, + TP_PROTO(struct spu_context *ctx, struct spu *spu, const char *name), + TP_ARGS(ctx, spu, name), + + TP_STRUCT__entry( + __field(const char *, name) + __field(int, owner_tid) + __field(int, number) + ), + + TP_fast_assign( + __entry->name = name; + __entry->owner_tid = ctx->tid; + __entry->number = spu ? spu->number : -1; + ), + + TP_printk("%s (ctxthread = %d, spu = %d)", + __entry->name, __entry->owner_tid, __entry->number) +); + +#define spu_context_trace(name, ctx, spu) \ + trace_spufs_context(ctx, spu, __stringify(name)) +#define spu_context_nospu_trace(name, ctx) \ + trace_spufs_context(ctx, NULL, __stringify(name)) + +#endif /* _TRACE_SPUFS_H */ + +#undef TRACE_INCLUDE_PATH +#define TRACE_INCLUDE_PATH . +#define TRACE_INCLUDE_FILE sputrace +#include <trace/define_trace.h> diff --git a/arch/powerpc/platforms/iseries/exception.S b/arch/powerpc/platforms/iseries/exception.S index 2f581521eb9b..5369653dcf6a 100644 --- a/arch/powerpc/platforms/iseries/exception.S +++ b/arch/powerpc/platforms/iseries/exception.S @@ -47,7 +47,7 @@ system_reset_iSeries: LOAD_REG_ADDR(r13, paca) mulli r0,r23,PACA_SIZE add r13,r13,r0 - mtspr SPRN_SPRG3,r13 /* Save it away for the future */ + mtspr SPRN_SPRG_PACA,r13 /* Save it away for the future */ mfmsr r24 ori r24,r24,MSR_RI mtmsrd r24 /* RI on */ @@ -116,7 +116,7 @@ iSeries_secondary_smp_loop: #endif /* CONFIG_SMP */ li r0,-1 /* r0=-1 indicates a Hypervisor call */ sc /* Invoke the hypervisor via a system call */ - mfspr r13,SPRN_SPRG3 /* Put r13 back ???? */ + mfspr r13,SPRN_SPRG_PACA /* Put r13 back ???? */ b 2b /* If SMP not configured, secondaries * loop forever */ @@ -126,34 +126,45 @@ iSeries_secondary_smp_loop: .globl data_access_iSeries data_access_iSeries: - mtspr SPRN_SPRG1,r13 + mtspr SPRN_SPRG_SCRATCH0,r13 BEGIN_FTR_SECTION - mtspr SPRN_SPRG2,r12 - mfspr r13,SPRN_DAR - mfspr r12,SPRN_DSISR - srdi r13,r13,60 - rlwimi r13,r12,16,0x20 - mfcr r12 - cmpwi r13,0x2c + mfspr r13,SPRN_SPRG_PACA + std r9,PACA_EXSLB+EX_R9(r13) + std r10,PACA_EXSLB+EX_R10(r13) + mfspr r10,SPRN_DAR + mfspr r9,SPRN_DSISR + srdi r10,r10,60 + rlwimi r10,r9,16,0x20 + mfcr r9 + cmpwi r10,0x2c beq .do_stab_bolted_iSeries - mtcrf 0x80,r12 - mfspr r12,SPRN_SPRG2 -END_FTR_SECTION_IFCLR(CPU_FTR_SLB) + ld r10,PACA_EXSLB+EX_R10(r13) + std r11,PACA_EXGEN+EX_R11(r13) + ld r11,PACA_EXSLB+EX_R9(r13) + std r12,PACA_EXGEN+EX_R12(r13) + mfspr r12,SPRN_SPRG_SCRATCH0 + std r10,PACA_EXGEN+EX_R10(r13) + std r11,PACA_EXGEN+EX_R9(r13) + std r12,PACA_EXGEN+EX_R13(r13) + EXCEPTION_PROLOG_ISERIES_1 +FTR_SECTION_ELSE EXCEPTION_PROLOG_1(PACA_EXGEN) EXCEPTION_PROLOG_ISERIES_1 +ALT_FTR_SECTION_END_IFCLR(CPU_FTR_SLB) b data_access_common .do_stab_bolted_iSeries: - mtcrf 0x80,r12 - mfspr r12,SPRN_SPRG2 - EXCEPTION_PROLOG_1(PACA_EXSLB) + std r11,PACA_EXSLB+EX_R11(r13) + std r12,PACA_EXSLB+EX_R12(r13) + mfspr r10,SPRN_SPRG_SCRATCH0 + std r10,PACA_EXSLB+EX_R13(r13) EXCEPTION_PROLOG_ISERIES_1 b .do_stab_bolted .globl data_access_slb_iSeries data_access_slb_iSeries: - mtspr SPRN_SPRG1,r13 /* save r13 */ - mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ + mtspr SPRN_SPRG_SCRATCH0,r13 /* save r13 */ + mfspr r13,SPRN_SPRG_PACA /* get paca address into r13 */ std r3,PACA_EXSLB+EX_R3(r13) mfspr r3,SPRN_DAR std r9,PACA_EXSLB+EX_R9(r13) @@ -165,7 +176,7 @@ data_access_slb_iSeries: std r10,PACA_EXSLB+EX_R10(r13) std r11,PACA_EXSLB+EX_R11(r13) std r12,PACA_EXSLB+EX_R12(r13) - mfspr r10,SPRN_SPRG1 + mfspr r10,SPRN_SPRG_SCRATCH0 std r10,PACA_EXSLB+EX_R13(r13) ld r12,PACALPPACAPTR(r13) ld r12,LPPACASRR1(r12) @@ -175,8 +186,8 @@ data_access_slb_iSeries: .globl instruction_access_slb_iSeries instruction_access_slb_iSeries: - mtspr SPRN_SPRG1,r13 /* save r13 */ - mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ + mtspr SPRN_SPRG_SCRATCH0,r13 /* save r13 */ + mfspr r13,SPRN_SPRG_PACA /* get paca address into r13 */ std r3,PACA_EXSLB+EX_R3(r13) ld r3,PACALPPACAPTR(r13) ld r3,LPPACASRR0(r3) /* get SRR0 value */ @@ -189,7 +200,7 @@ instruction_access_slb_iSeries: std r10,PACA_EXSLB+EX_R10(r13) std r11,PACA_EXSLB+EX_R11(r13) std r12,PACA_EXSLB+EX_R12(r13) - mfspr r10,SPRN_SPRG1 + mfspr r10,SPRN_SPRG_SCRATCH0 std r10,PACA_EXSLB+EX_R13(r13) ld r12,PACALPPACAPTR(r13) ld r12,LPPACASRR1(r12) @@ -200,7 +211,7 @@ slb_miss_user_iseries: std r10,PACA_EXGEN+EX_R10(r13) std r11,PACA_EXGEN+EX_R11(r13) std r12,PACA_EXGEN+EX_R12(r13) - mfspr r10,SPRG1 + mfspr r10,SPRG_SCRATCH0 ld r11,PACA_EXSLB+EX_R9(r13) ld r12,PACA_EXSLB+EX_R3(r13) std r10,PACA_EXGEN+EX_R13(r13) @@ -221,7 +232,7 @@ slb_miss_user_iseries: .globl system_call_iSeries system_call_iSeries: mr r9,r13 - mfspr r13,SPRN_SPRG3 + mfspr r13,SPRN_SPRG_PACA EXCEPTION_PROLOG_ISERIES_1 b system_call_common diff --git a/arch/powerpc/platforms/iseries/exception.h b/arch/powerpc/platforms/iseries/exception.h index ced45a8fa1aa..bae3fba5ad8e 100644 --- a/arch/powerpc/platforms/iseries/exception.h +++ b/arch/powerpc/platforms/iseries/exception.h @@ -24,7 +24,7 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ -#include <asm/exception.h> +#include <asm/exception-64s.h> #define EXCEPTION_PROLOG_ISERIES_1 \ mfmsr r10; \ @@ -38,7 +38,7 @@ .globl label##_iSeries; \ label##_iSeries: \ HMT_MEDIUM; \ - mtspr SPRN_SPRG1,r13; /* save r13 */ \ + mtspr SPRN_SPRG_SCRATCH0,r13; /* save r13 */ \ EXCEPTION_PROLOG_1(area); \ EXCEPTION_PROLOG_ISERIES_1; \ b label##_common @@ -47,7 +47,7 @@ label##_iSeries: \ .globl label##_iSeries; \ label##_iSeries: \ HMT_MEDIUM; \ - mtspr SPRN_SPRG1,r13; /* save r13 */ \ + mtspr SPRN_SPRG_SCRATCH0,r13; /* save r13 */ \ EXCEPTION_PROLOG_1(PACA_EXGEN); \ lbz r10,PACASOFTIRQEN(r13); \ cmpwi 0,r10,0; \ diff --git a/arch/powerpc/platforms/iseries/mf.c b/arch/powerpc/platforms/iseries/mf.c index fef4d5150517..0d9343df35bc 100644 --- a/arch/powerpc/platforms/iseries/mf.c +++ b/arch/powerpc/platforms/iseries/mf.c @@ -872,7 +872,7 @@ static int proc_mf_dump_cmdline(char *page, char **start, off_t off, count = 256 - off; dma_addr = iseries_hv_map(page, off + count, DMA_FROM_DEVICE); - if (dma_mapping_error(NULL, dma_addr)) + if (dma_addr == DMA_ERROR_CODE) return -ENOMEM; memset(page, 0, off + count); memset(&vsp_cmd, 0, sizeof(vsp_cmd)); diff --git a/arch/powerpc/platforms/pasemi/idle.c b/arch/powerpc/platforms/pasemi/idle.c index 43911d8b0206..75b296bc51af 100644 --- a/arch/powerpc/platforms/pasemi/idle.c +++ b/arch/powerpc/platforms/pasemi/idle.c @@ -90,7 +90,7 @@ machine_late_initcall(pasemi, pasemi_idle_init); static int __init idle_param(char *p) { int i; - for (i = 0; i < sizeof(modes)/sizeof(struct sleep_mode); i++) { + for (i = 0; i < ARRAY_SIZE(modes); i++) { if (!strcmp(modes[i].name, p)) { current_mode = i; break; diff --git a/arch/powerpc/platforms/powermac/cpufreq_32.c b/arch/powerpc/platforms/powermac/cpufreq_32.c index 65c585b8b00d..08d94e4cedd3 100644 --- a/arch/powerpc/platforms/powermac/cpufreq_32.c +++ b/arch/powerpc/platforms/powermac/cpufreq_32.c @@ -44,14 +44,6 @@ */ #undef DEBUG_FREQ -/* - * There is a problem with the core cpufreq code on SMP kernels, - * it won't recalculate the Bogomips properly - */ -#ifdef CONFIG_SMP -#warning "WARNING, CPUFREQ not recommended on SMP kernels" -#endif - extern void low_choose_7447a_dfs(int dfs); extern void low_choose_750fx_pll(int pll); extern void low_sleep_handler(void); diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c index e6c0040ee797..fbc9bbd74dbd 100644 --- a/arch/powerpc/platforms/powermac/feature.c +++ b/arch/powerpc/platforms/powermac/feature.c @@ -2419,13 +2419,13 @@ static int __init probe_motherboard(void) dt = of_find_node_by_name(NULL, "device-tree"); if (dt != NULL) model = of_get_property(dt, "model", NULL); - for(i=0; model && i<(sizeof(pmac_mb_defs)/sizeof(struct pmac_mb_def)); i++) { + for(i=0; model && i<ARRAY_SIZE(pmac_mb_defs); i++) { if (strcmp(model, pmac_mb_defs[i].model_string) == 0) { pmac_mb = pmac_mb_defs[i]; goto found; } } - for(i=0; i<(sizeof(pmac_mb_defs)/sizeof(struct pmac_mb_def)); i++) { + for(i=0; i<ARRAY_SIZE(pmac_mb_defs); i++) { if (machine_is_compatible(pmac_mb_defs[i].model_string)) { pmac_mb = pmac_mb_defs[i]; goto found; @@ -2589,9 +2589,16 @@ static void __init probe_uninorth(void) if (address == 0) return; uninorth_base = ioremap(address, 0x40000); + if (uninorth_base == NULL) + return; uninorth_rev = in_be32(UN_REG(UNI_N_VERSION)); - if (uninorth_maj == 3 || uninorth_maj == 4) + if (uninorth_maj == 3 || uninorth_maj == 4) { u3_ht_base = ioremap(address + U3_HT_CONFIG_BASE, 0x1000); + if (u3_ht_base == NULL) { + iounmap(uninorth_base); + return; + } + } printk(KERN_INFO "Found %s memory controller & host bridge" " @ 0x%08x revision: 0x%02x\n", uninorth_maj == 3 ? "U3" : diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c index 04cdd32624d4..e81403b245b5 100644 --- a/arch/powerpc/platforms/powermac/pci.c +++ b/arch/powerpc/platforms/powermac/pci.c @@ -1286,3 +1286,64 @@ static void fixup_k2_sata(struct pci_dev* dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, 0x0240, fixup_k2_sata); +/* + * On U4 (aka CPC945) the PCIe root complex "P2P" bridge resource ranges aren't + * configured by the firmware. The bridge itself seems to ignore them but it + * causes problems with Linux which then re-assigns devices below the bridge, + * thus changing addresses of those devices from what was in the device-tree, + * which sucks when those are video cards using offb + * + * We could just mark it transparent but I prefer fixing up the resources to + * properly show what's going on here, as I have some doubts about having them + * badly configured potentially being an issue for DMA. + * + * We leave PIO alone, it seems to be fine + * + * Oh and there's another funny bug. The OF properties advertize the region + * 0xf1000000..0xf1ffffff as being forwarded as memory space. But that's + * actually not true, this region is the memory mapped config space. So we + * also need to filter it out or we'll map things in the wrong place. + */ +static void fixup_u4_pcie(struct pci_dev* dev) +{ + struct pci_controller *host = pci_bus_to_host(dev->bus); + struct resource *region = NULL; + u32 reg; + int i; + + /* Only do that on PowerMac */ + if (!machine_is(powermac)) + return; + + /* Find the largest MMIO region */ + for (i = 0; i < 3; i++) { + struct resource *r = &host->mem_resources[i]; + if (!(r->flags & IORESOURCE_MEM)) + continue; + /* Skip the 0xf0xxxxxx..f2xxxxxx regions, we know they + * are reserved by HW for other things + */ + if (r->start >= 0xf0000000 && r->start < 0xf3000000) + continue; + if (!region || (r->end - r->start) > + (region->end - region->start)) + region = r; + } + /* Nothing found, bail */ + if (region == 0) + return; + + /* Print things out */ + printk(KERN_INFO "PCI: Fixup U4 PCIe bridge range: %pR\n", region); + + /* Fixup bridge config space. We know it's a Mac, resource aren't + * offset so let's just blast them as-is. We also know that they + * fit in 32 bits + */ + reg = ((region->start >> 16) & 0xfff0) | (region->end & 0xfff00000); + pci_write_config_dword(dev, PCI_MEMORY_BASE, reg); + pci_write_config_dword(dev, PCI_PREF_BASE_UPPER32, 0); + pci_write_config_dword(dev, PCI_PREF_LIMIT_UPPER32, 0); + pci_write_config_dword(dev, PCI_PREF_MEMORY_BASE, 0); +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_U4_PCIE, fixup_u4_pcie); diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c index 6d4da7b46b41..937a38e73178 100644 --- a/arch/powerpc/platforms/powermac/smp.c +++ b/arch/powerpc/platforms/powermac/smp.c @@ -408,7 +408,7 @@ static void __init smp_psurge_setup_cpu(int cpu_nr) /* reset the entry point so if we get another intr we won't * try to startup again */ out_be32(psurge_start, 0x100); - if (setup_irq(30, &psurge_irqaction)) + if (setup_irq(irq_create_mapping(NULL, 30), &psurge_irqaction)) printk(KERN_ERR "Couldn't get primary IPI interrupt"); } diff --git a/arch/powerpc/platforms/powermac/udbg_scc.c b/arch/powerpc/platforms/powermac/udbg_scc.c index 572771fd8463..9490157da62e 100644 --- a/arch/powerpc/platforms/powermac/udbg_scc.c +++ b/arch/powerpc/platforms/powermac/udbg_scc.c @@ -1,5 +1,5 @@ /* - * udbg for for zilog scc ports as found on Apple PowerMacs + * udbg for zilog scc ports as found on Apple PowerMacs * * Copyright (C) 2001-2005 PPC 64 Team, IBM Corp * diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c index 846eb8b57fd1..189a25b80735 100644 --- a/arch/powerpc/platforms/ps3/mm.c +++ b/arch/powerpc/platforms/ps3/mm.c @@ -23,8 +23,8 @@ #include <linux/memory_hotplug.h> #include <linux/lmb.h> +#include <asm/cell-regs.h> #include <asm/firmware.h> -#include <asm/iommu.h> #include <asm/prom.h> #include <asm/udbg.h> #include <asm/lv1call.h> diff --git a/arch/powerpc/platforms/ps3/smp.c b/arch/powerpc/platforms/ps3/smp.c index f6e04bcc70ef..51ffde40af2b 100644 --- a/arch/powerpc/platforms/ps3/smp.c +++ b/arch/powerpc/platforms/ps3/smp.c @@ -37,7 +37,7 @@ */ #define MSG_COUNT 4 -static DEFINE_PER_CPU(unsigned int, ps3_ipi_virqs[MSG_COUNT]); +static DEFINE_PER_CPU(unsigned int [MSG_COUNT], ps3_ipi_virqs); static void do_message_pass(int target, int msg) { diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c index 3f763c5284ac..e34b305a7a52 100644 --- a/arch/powerpc/platforms/ps3/system-bus.c +++ b/arch/powerpc/platforms/ps3/system-bus.c @@ -27,7 +27,7 @@ #include <asm/udbg.h> #include <asm/lv1call.h> #include <asm/firmware.h> -#include <asm/iommu.h> +#include <asm/cell-regs.h> #include "platform.h" @@ -694,7 +694,7 @@ static int ps3_dma_supported(struct device *_dev, u64 mask) return mask >= DMA_BIT_MASK(32); } -static struct dma_mapping_ops ps3_sb_dma_ops = { +static struct dma_map_ops ps3_sb_dma_ops = { .alloc_coherent = ps3_alloc_coherent, .free_coherent = ps3_free_coherent, .map_sg = ps3_sb_map_sg, @@ -704,7 +704,7 @@ static struct dma_mapping_ops ps3_sb_dma_ops = { .unmap_page = ps3_unmap_page, }; -static struct dma_mapping_ops ps3_ioc0_dma_ops = { +static struct dma_map_ops ps3_ioc0_dma_ops = { .alloc_coherent = ps3_alloc_coherent, .free_coherent = ps3_free_coherent, .map_sg = ps3_ioc0_map_sg, diff --git a/arch/powerpc/platforms/ps3/time.c b/arch/powerpc/platforms/ps3/time.c index b178a1e66c91..40b5cb433005 100644 --- a/arch/powerpc/platforms/ps3/time.c +++ b/arch/powerpc/platforms/ps3/time.c @@ -21,6 +21,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> +#include <asm/firmware.h> #include <asm/rtc.h> #include <asm/lv1call.h> #include <asm/ps3.h> @@ -84,6 +85,9 @@ static int __init ps3_rtc_init(void) { struct platform_device *pdev; + if (!firmware_has_feature(FW_FEATURE_PS3_LV1)) + return -ENODEV; + pdev = platform_device_register_simple("rtc-ps3", -1, NULL, 0); if (IS_ERR(pdev)) return PTR_ERR(pdev); diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index 989d6462c154..ccd8dd03b8c9 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -744,7 +744,15 @@ int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state stat static void __rtas_set_slot_reset(struct pci_dn *pdn) { - rtas_pci_slot_reset (pdn, 1); + struct pci_dev *dev = pdn->pcidev; + + /* Determine type of EEH reset required by device, + * default hot reset or fundamental reset + */ + if (dev->needs_freset) + rtas_pci_slot_reset(pdn, 3); + else + rtas_pci_slot_reset(pdn, 1); /* The PCI bus requires that the reset be held high for at least * a 100 milliseconds. We wait a bit longer 'just in case'. */ diff --git a/arch/powerpc/platforms/pseries/hvCall_inst.c b/arch/powerpc/platforms/pseries/hvCall_inst.c index eae51ef9af24..3631a4f277eb 100644 --- a/arch/powerpc/platforms/pseries/hvCall_inst.c +++ b/arch/powerpc/platforms/pseries/hvCall_inst.c @@ -71,7 +71,7 @@ static int hc_show(struct seq_file *m, void *p) return 0; } -static struct seq_operations hcall_inst_seq_ops = { +static const struct seq_operations hcall_inst_seq_ops = { .start = hc_start, .next = hc_next, .stop = hc_stop, diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c index ad152a0e3946..b6fa3e4b51b5 100644 --- a/arch/powerpc/platforms/pseries/pci_dlpar.c +++ b/arch/powerpc/platforms/pseries/pci_dlpar.c @@ -151,7 +151,7 @@ struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn) if (dn->child) eeh_add_device_tree_early(dn); - scan_phb(phb); + pcibios_scan_phb(phb, dn); pcibios_finish_adding_to_bus(phb->bus); return phb; diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c index b6f1b137d427..2e2bbe120b90 100644 --- a/arch/powerpc/platforms/pseries/reconfig.c +++ b/arch/powerpc/platforms/pseries/reconfig.c @@ -20,6 +20,7 @@ #include <asm/machdep.h> #include <asm/uaccess.h> #include <asm/pSeries_reconfig.h> +#include <asm/mmu.h> @@ -439,9 +440,15 @@ static int do_update_property(char *buf, size_t bufsize) if (!newprop) return -ENOMEM; + if (!strcmp(name, "slb-size") || !strcmp(name, "ibm,slb-size")) + slb_set_size(*(int *)value); + oldprop = of_find_property(np, name,NULL); - if (!oldprop) + if (!oldprop) { + if (strlen(name)) + return prom_add_property(np, newprop); return -ENODEV; + } rc = prom_update_property(np, newprop, oldprop); if (rc) diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 8d75ea21296f..ca5f2e10972c 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -223,10 +223,6 @@ static void pseries_lpar_enable_pmcs(void) set = 1UL << 63; reset = 0; plpar_hcall_norets(H_PERFMON, set, reset); - - /* instruct hypervisor to maintain PMCs */ - if (firmware_has_feature(FW_FEATURE_SPLPAR)) - get_lppaca()->pmcregs_in_use = 1; } static void __init pseries_discover_pic(void) diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c index 1f8f6cfb94f7..440000cc7130 100644 --- a/arch/powerpc/platforms/pseries/smp.c +++ b/arch/powerpc/platforms/pseries/smp.c @@ -56,8 +56,6 @@ */ static cpumask_t of_spin_map; -extern void generic_secondary_smp_init(unsigned long); - /** * smp_startup_cpu() - start the given cpu * diff --git a/arch/powerpc/sysdev/axonram.c b/arch/powerpc/sysdev/axonram.c index a4779912a5ca..88f4ae787832 100644 --- a/arch/powerpc/sysdev/axonram.c +++ b/arch/powerpc/sysdev/axonram.c @@ -165,7 +165,7 @@ axon_ram_direct_access(struct block_device *device, sector_t sector, return 0; } -static struct block_device_operations axon_ram_devops = { +static const struct block_device_operations axon_ram_devops = { .owner = THIS_MODULE, .direct_access = axon_ram_direct_access }; diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c index cbb3bed75d3c..757a83fe5e59 100644 --- a/arch/powerpc/sysdev/fsl_rio.c +++ b/arch/powerpc/sysdev/fsl_rio.c @@ -1057,6 +1057,10 @@ int fsl_rio_setup(struct of_device *dev) law_start, law_size); ops = kmalloc(sizeof(struct rio_ops), GFP_KERNEL); + if (!ops) { + rc = -ENOMEM; + goto err_ops; + } ops->lcread = fsl_local_config_read; ops->lcwrite = fsl_local_config_write; ops->cread = fsl_rio_config_read; @@ -1064,6 +1068,10 @@ int fsl_rio_setup(struct of_device *dev) ops->dsend = fsl_rio_doorbell_send; port = kzalloc(sizeof(struct rio_mport), GFP_KERNEL); + if (!port) { + rc = -ENOMEM; + goto err_port; + } port->id = 0; port->index = 0; @@ -1071,7 +1079,7 @@ int fsl_rio_setup(struct of_device *dev) if (!priv) { printk(KERN_ERR "Can't alloc memory for 'priv'\n"); rc = -ENOMEM; - goto err; + goto err_priv; } INIT_LIST_HEAD(&port->dbells); @@ -1169,11 +1177,13 @@ int fsl_rio_setup(struct of_device *dev) return 0; err: - if (priv) - iounmap(priv->regs_win); - kfree(ops); + iounmap(priv->regs_win); kfree(priv); +err_priv: kfree(port); +err_port: + kfree(ops); +err_ops: return rc; } diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index 95dbc643c4fc..adca4affcf1f 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -37,6 +37,7 @@ #include <asm/irq.h> #include <asm/time.h> #include <asm/prom.h> +#include <asm/machdep.h> #include <sysdev/fsl_soc.h> #include <mm/mmu_decl.h> #include <asm/cpm2.h> @@ -383,8 +384,9 @@ static int __init setup_rstcr(void) if (!rstcr) printk (KERN_EMERG "Error: reset control register " "not mapped!\n"); - } else - printk (KERN_INFO "rstcr compatible register does not exist!\n"); + } else if (ppc_md.restart == fsl_rstcr_restart) + printk(KERN_ERR "No RSTCR register, warm reboot won't work\n"); + if (np) of_node_put(np); return 0; diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c index 69e2630c9062..cb7689c4bfbd 100644 --- a/arch/powerpc/sysdev/ipic.c +++ b/arch/powerpc/sysdev/ipic.c @@ -735,8 +735,10 @@ struct ipic * __init ipic_init(struct device_node *node, unsigned int flags) ipic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR, NR_IPIC_INTS, &ipic_host_ops, 0); - if (ipic->irqhost == NULL) + if (ipic->irqhost == NULL) { + kfree(ipic); return NULL; + } ipic->regs = ioremap(res.start, res.end - res.start + 1); @@ -781,6 +783,9 @@ struct ipic * __init ipic_init(struct device_node *node, unsigned int flags) primary_ipic = ipic; irq_set_default_host(primary_ipic->irqhost); + ipic_write(ipic->regs, IPIC_SIMSR_H, 0); + ipic_write(ipic->regs, IPIC_SIMSR_L, 0); + printk ("IPIC (%d IRQ sources) at %p\n", NR_IPIC_INTS, primary_ipic->regs); diff --git a/arch/powerpc/sysdev/mmio_nvram.c b/arch/powerpc/sysdev/mmio_nvram.c index 7b49633a4bd0..207324209065 100644 --- a/arch/powerpc/sysdev/mmio_nvram.c +++ b/arch/powerpc/sysdev/mmio_nvram.c @@ -53,6 +53,23 @@ static ssize_t mmio_nvram_read(char *buf, size_t count, loff_t *index) return count; } +static unsigned char mmio_nvram_read_val(int addr) +{ + unsigned long flags; + unsigned char val; + + if (addr >= mmio_nvram_len) + return 0xff; + + spin_lock_irqsave(&mmio_nvram_lock, flags); + + val = ioread8(mmio_nvram_start + addr); + + spin_unlock_irqrestore(&mmio_nvram_lock, flags); + + return val; +} + static ssize_t mmio_nvram_write(char *buf, size_t count, loff_t *index) { unsigned long flags; @@ -72,6 +89,19 @@ static ssize_t mmio_nvram_write(char *buf, size_t count, loff_t *index) return count; } +void mmio_nvram_write_val(int addr, unsigned char val) +{ + unsigned long flags; + + if (addr < mmio_nvram_len) { + spin_lock_irqsave(&mmio_nvram_lock, flags); + + iowrite8(val, mmio_nvram_start + addr); + + spin_unlock_irqrestore(&mmio_nvram_lock, flags); + } +} + static ssize_t mmio_nvram_get_size(void) { return mmio_nvram_len; @@ -114,6 +144,8 @@ int __init mmio_nvram_init(void) printk(KERN_INFO "mmio NVRAM, %luk at 0x%lx mapped to %p\n", mmio_nvram_len >> 10, nvram_addr, mmio_nvram_start); + ppc_md.nvram_read_val = mmio_nvram_read_val; + ppc_md.nvram_write_val = mmio_nvram_write_val; ppc_md.nvram_read = mmio_nvram_read; ppc_md.nvram_write = mmio_nvram_write; ppc_md.nvram_size = mmio_nvram_get_size; diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 3981ae4cb58e..30c44e6b0413 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -230,14 +230,16 @@ static inline u32 _mpic_irq_read(struct mpic *mpic, unsigned int src_no, unsigne { unsigned int isu = src_no >> mpic->isu_shift; unsigned int idx = src_no & mpic->isu_mask; + unsigned int val; + val = _mpic_read(mpic->reg_type, &mpic->isus[isu], + reg + (idx * MPIC_INFO(IRQ_STRIDE))); #ifdef CONFIG_MPIC_BROKEN_REGREAD if (reg == 0) - return mpic->isu_reg0_shadow[idx]; - else + val = (val & (MPIC_VECPRI_MASK | MPIC_VECPRI_ACTIVITY)) | + mpic->isu_reg0_shadow[src_no]; #endif - return _mpic_read(mpic->reg_type, &mpic->isus[isu], - reg + (idx * MPIC_INFO(IRQ_STRIDE))); + return val; } static inline void _mpic_irq_write(struct mpic *mpic, unsigned int src_no, @@ -251,7 +253,8 @@ static inline void _mpic_irq_write(struct mpic *mpic, unsigned int src_no, #ifdef CONFIG_MPIC_BROKEN_REGREAD if (reg == 0) - mpic->isu_reg0_shadow[idx] = value; + mpic->isu_reg0_shadow[src_no] = + value & ~(MPIC_VECPRI_MASK | MPIC_VECPRI_ACTIVITY); #endif } diff --git a/arch/powerpc/sysdev/qe_lib/gpio.c b/arch/powerpc/sysdev/qe_lib/gpio.c index 3485288dce31..8e7a7767dd5c 100644 --- a/arch/powerpc/sysdev/qe_lib/gpio.c +++ b/arch/powerpc/sysdev/qe_lib/gpio.c @@ -105,14 +105,14 @@ static int qe_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc); unsigned long flags; + qe_gpio_set(gc, gpio, val); + spin_lock_irqsave(&qe_gc->lock, flags); __par_io_config_pin(mm_gc->regs, gpio, QE_PIO_DIR_OUT, 0, 0, 0); spin_unlock_irqrestore(&qe_gc->lock, flags); - qe_gpio_set(gc, gpio, val); - return 0; } diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c index 237e3654f48c..464271bea6c9 100644 --- a/arch/powerpc/sysdev/qe_lib/qe.c +++ b/arch/powerpc/sysdev/qe_lib/qe.c @@ -65,6 +65,19 @@ static unsigned int qe_num_of_snum; static phys_addr_t qebase = -1; +int qe_alive_during_sleep(void) +{ + static int ret = -1; + + if (ret != -1) + return ret; + + ret = !of_find_compatible_node(NULL, NULL, "fsl,mpc8569-pmc"); + + return ret; +} +EXPORT_SYMBOL(qe_alive_during_sleep); + phys_addr_t get_qe_base(void) { struct device_node *qe; diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c index 074905c3ee5a..3faa42e03a85 100644 --- a/arch/powerpc/sysdev/qe_lib/qe_ic.c +++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c @@ -339,8 +339,10 @@ void __init qe_ic_init(struct device_node *node, unsigned int flags, qe_ic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR, NR_QE_IC_INTS, &qe_ic_host_ops, 0); - if (qe_ic->irqhost == NULL) + if (qe_ic->irqhost == NULL) { + kfree(qe_ic); return; + } qe_ic->regs = ioremap(res.start, res.end - res.start + 1); @@ -352,6 +354,7 @@ void __init qe_ic_init(struct device_node *node, unsigned int flags, if (qe_ic->virq_low == NO_IRQ) { printk(KERN_ERR "Failed to map QE_IC low IRQ\n"); + kfree(qe_ic); return; } diff --git a/arch/powerpc/sysdev/xilinx_intc.c b/arch/powerpc/sysdev/xilinx_intc.c index 3ee1fd37bbfc..40edad520770 100644 --- a/arch/powerpc/sysdev/xilinx_intc.c +++ b/arch/powerpc/sysdev/xilinx_intc.c @@ -234,7 +234,6 @@ static void xilinx_i8259_cascade(unsigned int irq, struct irq_desc *desc) generic_handle_irq(cascade_irq); /* Let xilinx_intc end the interrupt */ - desc->chip->ack(irq); desc->chip->unmask(irq); } diff --git a/arch/powerpc/xmon/Makefile b/arch/powerpc/xmon/Makefile index 85ab97ab840a..faa81b6a6612 100644 --- a/arch/powerpc/xmon/Makefile +++ b/arch/powerpc/xmon/Makefile @@ -2,6 +2,8 @@ subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror +GCOV_PROFILE := n + ifdef CONFIG_PPC64 EXTRA_CFLAGS += -mno-minimal-toc endif diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index e1f33a81e5e1..0e09a45ac79a 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -2570,7 +2570,7 @@ static void xmon_print_symbol(unsigned long address, const char *mid, printf("%s", after); } -#ifdef CONFIG_PPC64 +#ifdef CONFIG_PPC_BOOK3S_64 static void dump_slb(void) { int i; |