summaryrefslogtreecommitdiffstats
path: root/arch/x86/include/asm/i387.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/include/asm/i387.h')
-rw-r--r--arch/x86/include/asm/i387.h307
1 files changed, 252 insertions, 55 deletions
diff --git a/arch/x86/include/asm/i387.h b/arch/x86/include/asm/i387.h
index 6919e936345b..247904945d3f 100644
--- a/arch/x86/include/asm/i387.h
+++ b/arch/x86/include/asm/i387.h
@@ -29,10 +29,11 @@ extern unsigned int sig_xstate_size;
extern void fpu_init(void);
extern void mxcsr_feature_mask_init(void);
extern int init_fpu(struct task_struct *child);
-extern asmlinkage void math_state_restore(void);
-extern void __math_state_restore(void);
+extern void math_state_restore(void);
extern int dump_fpu(struct pt_regs *, struct user_i387_struct *);
+DECLARE_PER_CPU(struct task_struct *, fpu_owner_task);
+
extern user_regset_active_fn fpregs_active, xfpregs_active;
extern user_regset_get_fn fpregs_get, xfpregs_get, fpregs_soft_get,
xstateregs_get;
@@ -212,19 +213,11 @@ static inline void fpu_fxsave(struct fpu *fpu)
#endif /* CONFIG_X86_64 */
-/* We need a safe address that is cheap to find and that is already
- in L1 during context switch. The best choices are unfortunately
- different for UP and SMP */
-#ifdef CONFIG_SMP
-#define safe_address (__per_cpu_offset[0])
-#else
-#define safe_address (__get_cpu_var(kernel_cpustat).cpustat[CPUTIME_USER])
-#endif
-
/*
- * These must be called with preempt disabled
+ * These must be called with preempt disabled. Returns
+ * 'true' if the FPU state is still intact.
*/
-static inline void fpu_save_init(struct fpu *fpu)
+static inline int fpu_save_init(struct fpu *fpu)
{
if (use_xsave()) {
fpu_xsave(fpu);
@@ -233,33 +226,33 @@ static inline void fpu_save_init(struct fpu *fpu)
* xsave header may indicate the init state of the FP.
*/
if (!(fpu->state->xsave.xsave_hdr.xstate_bv & XSTATE_FP))
- return;
+ return 1;
} else if (use_fxsr()) {
fpu_fxsave(fpu);
} else {
asm volatile("fnsave %[fx]; fwait"
: [fx] "=m" (fpu->state->fsave));
- return;
+ return 0;
}
- if (unlikely(fpu->state->fxsave.swd & X87_FSW_ES))
+ /*
+ * If exceptions are pending, we need to clear them so
+ * that we don't randomly get exceptions later.
+ *
+ * FIXME! Is this perhaps only true for the old-style
+ * irq13 case? Maybe we could leave the x87 state
+ * intact otherwise?
+ */
+ if (unlikely(fpu->state->fxsave.swd & X87_FSW_ES)) {
asm volatile("fnclex");
-
- /* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception
- is pending. Clear the x87 state here by setting it to fixed
- values. safe_address is a random variable that should be in L1 */
- alternative_input(
- ASM_NOP8 ASM_NOP2,
- "emms\n\t" /* clear stack tags */
- "fildl %P[addr]", /* set F?P to defined value */
- X86_FEATURE_FXSAVE_LEAK,
- [addr] "m" (safe_address));
+ return 0;
+ }
+ return 1;
}
-static inline void __save_init_fpu(struct task_struct *tsk)
+static inline int __save_init_fpu(struct task_struct *tsk)
{
- fpu_save_init(&tsk->thread.fpu);
- task_thread_info(tsk)->status &= ~TS_USEDFPU;
+ return fpu_save_init(&tsk->thread.fpu);
}
static inline int fpu_fxrstor_checking(struct fpu *fpu)
@@ -277,44 +270,212 @@ static inline int fpu_restore_checking(struct fpu *fpu)
static inline int restore_fpu_checking(struct task_struct *tsk)
{
+ /* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception
+ is pending. Clear the x87 state here by setting it to fixed
+ values. "m" is a random variable that should be in L1 */
+ alternative_input(
+ ASM_NOP8 ASM_NOP2,
+ "emms\n\t" /* clear stack tags */
+ "fildl %P[addr]", /* set F?P to defined value */
+ X86_FEATURE_FXSAVE_LEAK,
+ [addr] "m" (tsk->thread.fpu.has_fpu));
+
return fpu_restore_checking(&tsk->thread.fpu);
}
/*
- * Signal frame handlers...
+ * Software FPU state helpers. Careful: these need to
+ * be preemption protection *and* they need to be
+ * properly paired with the CR0.TS changes!
*/
-extern int save_i387_xstate(void __user *buf);
-extern int restore_i387_xstate(void __user *buf);
+static inline int __thread_has_fpu(struct task_struct *tsk)
+{
+ return tsk->thread.fpu.has_fpu;
+}
-static inline void __unlazy_fpu(struct task_struct *tsk)
+/* Must be paired with an 'stts' after! */
+static inline void __thread_clear_has_fpu(struct task_struct *tsk)
{
- if (task_thread_info(tsk)->status & TS_USEDFPU) {
- __save_init_fpu(tsk);
- stts();
- } else
- tsk->fpu_counter = 0;
+ tsk->thread.fpu.has_fpu = 0;
+ percpu_write(fpu_owner_task, NULL);
+}
+
+/* Must be paired with a 'clts' before! */
+static inline void __thread_set_has_fpu(struct task_struct *tsk)
+{
+ tsk->thread.fpu.has_fpu = 1;
+ percpu_write(fpu_owner_task, tsk);
+}
+
+/*
+ * Encapsulate the CR0.TS handling together with the
+ * software flag.
+ *
+ * These generally need preemption protection to work,
+ * do try to avoid using these on their own.
+ */
+static inline void __thread_fpu_end(struct task_struct *tsk)
+{
+ __thread_clear_has_fpu(tsk);
+ stts();
+}
+
+static inline void __thread_fpu_begin(struct task_struct *tsk)
+{
+ clts();
+ __thread_set_has_fpu(tsk);
+}
+
+/*
+ * FPU state switching for scheduling.
+ *
+ * This is a two-stage process:
+ *
+ * - switch_fpu_prepare() saves the old state and
+ * sets the new state of the CR0.TS bit. This is
+ * done within the context of the old process.
+ *
+ * - switch_fpu_finish() restores the new state as
+ * necessary.
+ */
+typedef struct { int preload; } fpu_switch_t;
+
+/*
+ * FIXME! We could do a totally lazy restore, but we need to
+ * add a per-cpu "this was the task that last touched the FPU
+ * on this CPU" variable, and the task needs to have a "I last
+ * touched the FPU on this CPU" and check them.
+ *
+ * We don't do that yet, so "fpu_lazy_restore()" always returns
+ * false, but some day..
+ */
+static inline int fpu_lazy_restore(struct task_struct *new, unsigned int cpu)
+{
+ return new == percpu_read_stable(fpu_owner_task) &&
+ cpu == new->thread.fpu.last_cpu;
+}
+
+static inline fpu_switch_t switch_fpu_prepare(struct task_struct *old, struct task_struct *new, int cpu)
+{
+ fpu_switch_t fpu;
+
+ fpu.preload = tsk_used_math(new) && new->fpu_counter > 5;
+ if (__thread_has_fpu(old)) {
+ if (!__save_init_fpu(old))
+ cpu = ~0;
+ old->thread.fpu.last_cpu = cpu;
+ old->thread.fpu.has_fpu = 0; /* But leave fpu_owner_task! */
+
+ /* Don't change CR0.TS if we just switch! */
+ if (fpu.preload) {
+ new->fpu_counter++;
+ __thread_set_has_fpu(new);
+ prefetch(new->thread.fpu.state);
+ } else
+ stts();
+ } else {
+ old->fpu_counter = 0;
+ old->thread.fpu.last_cpu = ~0;
+ if (fpu.preload) {
+ new->fpu_counter++;
+ if (fpu_lazy_restore(new, cpu))
+ fpu.preload = 0;
+ else
+ prefetch(new->thread.fpu.state);
+ __thread_fpu_begin(new);
+ }
+ }
+ return fpu;
+}
+
+/*
+ * By the time this gets called, we've already cleared CR0.TS and
+ * given the process the FPU if we are going to preload the FPU
+ * state - all we need to do is to conditionally restore the register
+ * state itself.
+ */
+static inline void switch_fpu_finish(struct task_struct *new, fpu_switch_t fpu)
+{
+ if (fpu.preload) {
+ if (unlikely(restore_fpu_checking(new)))
+ __thread_fpu_end(new);
+ }
}
+/*
+ * Signal frame handlers...
+ */
+extern int save_i387_xstate(void __user *buf);
+extern int restore_i387_xstate(void __user *buf);
+
static inline void __clear_fpu(struct task_struct *tsk)
{
- if (task_thread_info(tsk)->status & TS_USEDFPU) {
+ if (__thread_has_fpu(tsk)) {
/* Ignore delayed exceptions from user space */
asm volatile("1: fwait\n"
"2:\n"
_ASM_EXTABLE(1b, 2b));
- task_thread_info(tsk)->status &= ~TS_USEDFPU;
- stts();
+ __thread_fpu_end(tsk);
}
}
+/*
+ * Were we in an interrupt that interrupted kernel mode?
+ *
+ * We can do a kernel_fpu_begin/end() pair *ONLY* if that
+ * pair does nothing at all: the thread must not have fpu (so
+ * that we don't try to save the FPU state), and TS must
+ * be set (so that the clts/stts pair does nothing that is
+ * visible in the interrupted kernel thread).
+ */
+static inline bool interrupted_kernel_fpu_idle(void)
+{
+ return !__thread_has_fpu(current) &&
+ (read_cr0() & X86_CR0_TS);
+}
+
+/*
+ * Were we in user mode (or vm86 mode) when we were
+ * interrupted?
+ *
+ * Doing kernel_fpu_begin/end() is ok if we are running
+ * in an interrupt context from user mode - we'll just
+ * save the FPU state as required.
+ */
+static inline bool interrupted_user_mode(void)
+{
+ struct pt_regs *regs = get_irq_regs();
+ return regs && user_mode_vm(regs);
+}
+
+/*
+ * Can we use the FPU in kernel mode with the
+ * whole "kernel_fpu_begin/end()" sequence?
+ *
+ * It's always ok in process context (ie "not interrupt")
+ * but it is sometimes ok even from an irq.
+ */
+static inline bool irq_fpu_usable(void)
+{
+ return !in_interrupt() ||
+ interrupted_user_mode() ||
+ interrupted_kernel_fpu_idle();
+}
+
static inline void kernel_fpu_begin(void)
{
- struct thread_info *me = current_thread_info();
+ struct task_struct *me = current;
+
+ WARN_ON_ONCE(!irq_fpu_usable());
preempt_disable();
- if (me->status & TS_USEDFPU)
- __save_init_fpu(me->task);
- else
+ if (__thread_has_fpu(me)) {
+ __save_init_fpu(me);
+ __thread_clear_has_fpu(me);
+ /* We do 'stts()' in kernel_fpu_end() */
+ } else {
+ percpu_write(fpu_owner_task, NULL);
clts();
+ }
}
static inline void kernel_fpu_end(void)
@@ -323,14 +484,6 @@ static inline void kernel_fpu_end(void)
preempt_enable();
}
-static inline bool irq_fpu_usable(void)
-{
- struct pt_regs *regs;
-
- return !in_interrupt() || !(regs = get_irq_regs()) || \
- user_mode(regs) || (read_cr0() & X86_CR0_TS);
-}
-
/*
* Some instructions like VIA's padlock instructions generate a spurious
* DNA fault but don't modify SSE registers. And these instructions
@@ -363,20 +516,64 @@ static inline void irq_ts_restore(int TS_state)
}
/*
+ * The question "does this thread have fpu access?"
+ * is slightly racy, since preemption could come in
+ * and revoke it immediately after the test.
+ *
+ * However, even in that very unlikely scenario,
+ * we can just assume we have FPU access - typically
+ * to save the FP state - we'll just take a #NM
+ * fault and get the FPU access back.
+ *
+ * The actual user_fpu_begin/end() functions
+ * need to be preemption-safe, though.
+ *
+ * NOTE! user_fpu_end() must be used only after you
+ * have saved the FP state, and user_fpu_begin() must
+ * be used only immediately before restoring it.
+ * These functions do not do any save/restore on
+ * their own.
+ */
+static inline int user_has_fpu(void)
+{
+ return __thread_has_fpu(current);
+}
+
+static inline void user_fpu_end(void)
+{
+ preempt_disable();
+ __thread_fpu_end(current);
+ preempt_enable();
+}
+
+static inline void user_fpu_begin(void)
+{
+ preempt_disable();
+ if (!user_has_fpu())
+ __thread_fpu_begin(current);
+ preempt_enable();
+}
+
+/*
* These disable preemption on their own and are safe
*/
static inline void save_init_fpu(struct task_struct *tsk)
{
+ WARN_ON_ONCE(!__thread_has_fpu(tsk));
preempt_disable();
__save_init_fpu(tsk);
- stts();
+ __thread_fpu_end(tsk);
preempt_enable();
}
static inline void unlazy_fpu(struct task_struct *tsk)
{
preempt_disable();
- __unlazy_fpu(tsk);
+ if (__thread_has_fpu(tsk)) {
+ __save_init_fpu(tsk);
+ __thread_fpu_end(tsk);
+ } else
+ tsk->fpu_counter = 0;
preempt_enable();
}