diff options
Diffstat (limited to 'arch')
32 files changed, 424 insertions, 172 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 16bc8eb4901c..553b7cf17bfb 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1576,97 +1576,6 @@ config AUTO_ZRELADDR 0xf8000000. This assumes the zImage being placed in the first 128MB from start of memory. -config ZRELADDR - hex "Physical address of the decompressed kernel image" - depends on !AUTO_ZRELADDR - default 0x00008000 if ARCH_BCMRING ||\ - ARCH_CNS3XXX ||\ - ARCH_DOVE ||\ - ARCH_EBSA110 ||\ - ARCH_FOOTBRIDGE ||\ - ARCH_INTEGRATOR ||\ - ARCH_IOP13XX ||\ - ARCH_IOP33X ||\ - ARCH_IXP2000 ||\ - ARCH_IXP23XX ||\ - ARCH_IXP4XX ||\ - ARCH_KIRKWOOD ||\ - ARCH_KS8695 ||\ - ARCH_LOKI ||\ - ARCH_MMP ||\ - ARCH_MV78XX0 ||\ - ARCH_NOMADIK ||\ - ARCH_NUC93X ||\ - ARCH_NS9XXX ||\ - ARCH_ORION5X ||\ - ARCH_SPEAR3XX ||\ - ARCH_SPEAR6XX ||\ - ARCH_TEGRA ||\ - ARCH_U8500 ||\ - ARCH_VERSATILE ||\ - ARCH_W90X900 - default 0x08008000 if ARCH_MX1 ||\ - ARCH_SHARK - default 0x10008000 if ARCH_MSM ||\ - ARCH_OMAP1 ||\ - ARCH_RPC - default 0x20008000 if ARCH_S5P6440 ||\ - ARCH_S5P6442 ||\ - ARCH_S5PC100 ||\ - ARCH_S5PV210 - default 0x30008000 if ARCH_S3C2410 ||\ - ARCH_S3C2400 ||\ - ARCH_S3C2412 ||\ - ARCH_S3C2416 ||\ - ARCH_S3C2440 ||\ - ARCH_S3C2443 - default 0x40008000 if ARCH_STMP378X ||\ - ARCH_STMP37XX ||\ - ARCH_SH7372 ||\ - ARCH_SH7377 ||\ - ARCH_S5PV310 - default 0x50008000 if ARCH_S3C64XX ||\ - ARCH_SH7367 - default 0x60008000 if ARCH_VEXPRESS - default 0x80008000 if ARCH_MX25 ||\ - ARCH_MX3 ||\ - ARCH_NETX ||\ - ARCH_OMAP2PLUS ||\ - ARCH_PNX4008 - default 0x90008000 if ARCH_MX5 ||\ - ARCH_MX91231 - default 0xa0008000 if ARCH_IOP32X ||\ - ARCH_PXA ||\ - MACH_MX27 - default 0xc0008000 if ARCH_LH7A40X ||\ - MACH_MX21 - default 0xf0008000 if ARCH_AAEC2000 ||\ - ARCH_L7200 - default 0xc0028000 if ARCH_CLPS711X - default 0x70008000 if ARCH_AT91 && (ARCH_AT91CAP9 || ARCH_AT91SAM9G45) - default 0x20008000 if ARCH_AT91 && !(ARCH_AT91CAP9 || ARCH_AT91SAM9G45) - default 0xc0008000 if ARCH_DAVINCI && ARCH_DAVINCI_DA8XX - default 0x80008000 if ARCH_DAVINCI && !ARCH_DAVINCI_DA8XX - default 0x00008000 if ARCH_EP93XX && EP93XX_SDCE3_SYNC_PHYS_OFFSET - default 0xc0008000 if ARCH_EP93XX && EP93XX_SDCE0_PHYS_OFFSET - default 0xd0008000 if ARCH_EP93XX && EP93XX_SDCE1_PHYS_OFFSET - default 0xe0008000 if ARCH_EP93XX && EP93XX_SDCE2_PHYS_OFFSET - default 0xf0008000 if ARCH_EP93XX && EP93XX_SDCE3_ASYNC_PHYS_OFFSET - default 0x00008000 if ARCH_GEMINI && GEMINI_MEM_SWAP - default 0x10008000 if ARCH_GEMINI && !GEMINI_MEM_SWAP - default 0x70008000 if ARCH_REALVIEW && REALVIEW_HIGH_PHYS_OFFSET - default 0x00008000 if ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET - default 0xc0208000 if ARCH_SA1100 && SA1111 - default 0xc0008000 if ARCH_SA1100 && !SA1111 - default 0x30108000 if ARCH_S3C2410 && PM_H1940 - default 0x28E08000 if ARCH_U300 && MACH_U300_SINGLE_RAM - default 0x48008000 if ARCH_U300 && !MACH_U300_SINGLE_RAM - help - ZRELADDR is the physical address where the decompressed kernel - image will be placed. ZRELADDR has to be specified when the - assumption of AUTO_ZRELADDR is not valid, or when ZBOOT_ROM is - selected. - endmenu menu "CPU Power Management" diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index f705213caa88..4a590f4113e2 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -14,16 +14,18 @@ MKIMAGE := $(srctree)/scripts/mkuboot.sh ifneq ($(MACHINE),) --include $(srctree)/$(MACHINE)/Makefile.boot +include $(srctree)/$(MACHINE)/Makefile.boot endif # Note: the following conditions must always be true: +# ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET) # PARAMS_PHYS must be within 4MB of ZRELADDR # INITRD_PHYS must be in RAM +ZRELADDR := $(zreladdr-y) PARAMS_PHYS := $(params_phys-y) INITRD_PHYS := $(initrd_phys-y) -export INITRD_PHYS PARAMS_PHYS +export ZRELADDR INITRD_PHYS PARAMS_PHYS targets := Image zImage xipImage bootpImage uImage @@ -65,7 +67,7 @@ quiet_cmd_uimage = UIMAGE $@ ifeq ($(CONFIG_ZBOOT_ROM),y) $(obj)/uImage: LOADADDR=$(CONFIG_ZBOOT_ROM_TEXT) else -$(obj)/uImage: LOADADDR=$(CONFIG_ZRELADDR) +$(obj)/uImage: LOADADDR=$(ZRELADDR) endif ifeq ($(CONFIG_THUMB2_KERNEL),y) diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 68775e33476c..b23f6bc46cfa 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -79,6 +79,10 @@ endif EXTRA_CFLAGS := -fpic -fno-builtin EXTRA_AFLAGS := -Wa,-march=all +# Supply ZRELADDR to the decompressor via a linker symbol. +ifneq ($(CONFIG_AUTO_ZRELADDR),y) +LDFLAGS_vmlinux := --defsym zreladdr=$(ZRELADDR) +endif ifeq ($(CONFIG_CPU_ENDIAN_BE8),y) LDFLAGS_vmlinux += --be8 endif diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 6af9907c3b5c..6825c34646d4 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -177,7 +177,7 @@ not_angel: and r4, pc, #0xf8000000 add r4, r4, #TEXT_OFFSET #else - ldr r4, =CONFIG_ZRELADDR + ldr r4, =zreladdr #endif subs r0, r0, r1 @ calculate the delta offset diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c index 6c0913562455..7974baacafce 100644 --- a/arch/arm/common/it8152.c +++ b/arch/arm/common/it8152.c @@ -263,6 +263,14 @@ static int it8152_pci_platform_notify_remove(struct device *dev) return 0; } +int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size) +{ + dev_dbg(dev, "%s: dma_addr %08x, size %08x\n", + __func__, dma_addr, size); + return (dev->bus == &pci_bus_type) && + ((dma_addr + size - PHYS_OFFSET) >= SZ_64M); +} + int __init it8152_pci_setup(int nr, struct pci_sys_data *sys) { it8152_io.start = IT8152_IO_BASE + 0x12000; diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index c226fe10553e..c568da7dcae4 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -288,15 +288,7 @@ extern void dmabounce_unregister_dev(struct device *); * DMA access and 1 if the buffer needs to be bounced. * */ -#ifdef CONFIG_SA1111 extern int dma_needs_bounce(struct device*, dma_addr_t, size_t); -#else -static inline int dma_needs_bounce(struct device *dev, dma_addr_t addr, - size_t size) -{ - return 0; -} -#endif /* * The DMA API, implemented by dmabounce.c. See below for descriptions. diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h index 48837e6d8887..b5799a3b7117 100644 --- a/arch/arm/include/asm/perf_event.h +++ b/arch/arm/include/asm/perf_event.h @@ -17,7 +17,7 @@ * counter interrupts are regular interrupts and not an NMI. This * means that when we receive the interrupt we can call * perf_event_do_pending() that handles all of the work with - * interrupts enabled. + * interrupts disabled. */ static inline void set_perf_event_pending(void) diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index d02cfb683487..c891eb76c0e3 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -393,6 +393,9 @@ #define __NR_perf_event_open (__NR_SYSCALL_BASE+364) #define __NR_recvmmsg (__NR_SYSCALL_BASE+365) #define __NR_accept4 (__NR_SYSCALL_BASE+366) +#define __NR_fanotify_init (__NR_SYSCALL_BASE+367) +#define __NR_fanotify_mark (__NR_SYSCALL_BASE+368) +#define __NR_prlimit64 (__NR_SYSCALL_BASE+369) /* * The following SWIs are ARM private. diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index afeb71fa72cb..5c26eccef998 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -376,6 +376,9 @@ CALL(sys_perf_event_open) /* 365 */ CALL(sys_recvmmsg) CALL(sys_accept4) + CALL(sys_fanotify_init) + CALL(sys_fanotify_mark) + CALL(sys_prlimit64) #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls #define syscalls_counted diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 417c392ddf1c..ecbb0288e5dd 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -319,8 +319,8 @@ validate_event(struct cpu_hw_events *cpuc, { struct hw_perf_event fake_event = event->hw; - if (event->pmu && event->pmu != &pmu) - return 0; + if (event->pmu != &pmu || event->state <= PERF_EVENT_STATE_OFF) + return 1; return armpmu->get_event_idx(cpuc, &fake_event) >= 0; } @@ -1041,8 +1041,8 @@ armv6pmu_handle_irq(int irq_num, /* * Handle the pending perf events. * - * Note: this call *must* be run with interrupts enabled. For - * platforms that can have the PMU interrupts raised as a PMI, this + * Note: this call *must* be run with interrupts disabled. For + * platforms that can have the PMU interrupts raised as an NMI, this * will not work. */ perf_event_do_pending(); @@ -2017,8 +2017,8 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev) /* * Handle the pending perf events. * - * Note: this call *must* be run with interrupts enabled. For - * platforms that can have the PMU interrupts raised as a PMI, this + * Note: this call *must* be run with interrupts disabled. For + * platforms that can have the PMU interrupts raised as an NMI, this * will not work. */ perf_event_do_pending(); diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c index 8bf3cec98cfa..4566bd1c8660 100644 --- a/arch/arm/mach-ep93xx/clock.c +++ b/arch/arm/mach-ep93xx/clock.c @@ -560,4 +560,4 @@ static int __init ep93xx_clock_init(void) clkdev_add_table(clocks, ARRAY_SIZE(clocks)); return 0; } -arch_initcall(ep93xx_clock_init); +postcore_initcall(ep93xx_clock_init); diff --git a/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c index 91931dcb0689..4aaadc753d3e 100644 --- a/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c +++ b/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c @@ -215,7 +215,7 @@ struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata = { * Add platform devices present on this baseboard and init * them from CPU side as far as required to use them later on */ -void __init eukrea_mbimxsd_baseboard_init(void) +void __init eukrea_mbimxsd25_baseboard_init(void) { if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads, ARRAY_SIZE(eukrea_mbimxsd_pads))) diff --git a/arch/arm/mach-mx25/mach-cpuimx25.c b/arch/arm/mach-mx25/mach-cpuimx25.c index a5f0174290b4..e064bb3d6919 100644 --- a/arch/arm/mach-mx25/mach-cpuimx25.c +++ b/arch/arm/mach-mx25/mach-cpuimx25.c @@ -147,8 +147,8 @@ static void __init eukrea_cpuimx25_init(void) if (!otg_mode_host) mxc_register_device(&otg_udc_device, &otg_device_pdata); -#ifdef CONFIG_MACH_EUKREA_MBIMXSD_BASEBOARD - eukrea_mbimxsd_baseboard_init(); +#ifdef CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD + eukrea_mbimxsd25_baseboard_init(); #endif } diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c index d3af0fdf8475..7a62e744a8b0 100644 --- a/arch/arm/mach-mx3/clock-imx35.c +++ b/arch/arm/mach-mx3/clock-imx35.c @@ -155,7 +155,7 @@ static unsigned long get_rate_arm(void) aad = &clk_consumer[(pdr0 >> 16) & 0xf]; if (aad->sel) - fref = fref * 2 / 3; + fref = fref * 3 / 4; return fref / aad->arm; } @@ -164,7 +164,7 @@ static unsigned long get_rate_ahb(struct clk *clk) { unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0); struct arm_ahb_div *aad; - unsigned long fref = get_rate_mpll(); + unsigned long fref = get_rate_arm(); aad = &clk_consumer[(pdr0 >> 16) & 0xf]; @@ -176,16 +176,11 @@ static unsigned long get_rate_ipg(struct clk *clk) return get_rate_ahb(NULL) >> 1; } -static unsigned long get_3_3_div(unsigned long in) -{ - return (((in >> 3) & 0x7) + 1) * ((in & 0x7) + 1); -} - static unsigned long get_rate_uart(struct clk *clk) { unsigned long pdr3 = __raw_readl(CCM_BASE + CCM_PDR3); unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4); - unsigned long div = get_3_3_div(pdr4 >> 10); + unsigned long div = ((pdr4 >> 10) & 0x3f) + 1; if (pdr3 & (1 << 14)) return get_rate_arm() / div; @@ -216,7 +211,7 @@ static unsigned long get_rate_sdhc(struct clk *clk) break; } - return rate / get_3_3_div(div); + return rate / (div + 1); } static unsigned long get_rate_mshc(struct clk *clk) @@ -270,7 +265,7 @@ static unsigned long get_rate_csi(struct clk *clk) else rate = get_rate_ppll(); - return rate / get_3_3_div((pdr2 >> 16) & 0x3f); + return rate / (((pdr2 >> 16) & 0x3f) + 1); } static unsigned long get_rate_otg(struct clk *clk) @@ -283,25 +278,51 @@ static unsigned long get_rate_otg(struct clk *clk) else rate = get_rate_ppll(); - return rate / get_3_3_div((pdr4 >> 22) & 0x3f); + return rate / (((pdr4 >> 22) & 0x3f) + 1); } static unsigned long get_rate_ipg_per(struct clk *clk) { unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0); unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4); - unsigned long div1, div2; + unsigned long div; if (pdr0 & (1 << 26)) { - div1 = (pdr4 >> 19) & 0x7; - div2 = (pdr4 >> 16) & 0x7; - return get_rate_arm() / ((div1 + 1) * (div2 + 1)); + div = (pdr4 >> 16) & 0x3f; + return get_rate_arm() / (div + 1); } else { - div1 = (pdr0 >> 12) & 0x7; - return get_rate_ahb(NULL) / div1; + div = (pdr0 >> 12) & 0x7; + return get_rate_ahb(NULL) / (div + 1); } } +static unsigned long get_rate_hsp(struct clk *clk) +{ + unsigned long hsp_podf = (__raw_readl(CCM_BASE + CCM_PDR0) >> 20) & 0x03; + unsigned long fref = get_rate_mpll(); + + if (fref > 400 * 1000 * 1000) { + switch (hsp_podf) { + case 0: + return fref >> 2; + case 1: + return fref >> 3; + case 2: + return fref / 3; + } + } else { + switch (hsp_podf) { + case 0: + case 2: + return fref / 3; + case 1: + return fref / 6; + } + } + + return 0; +} + static int clk_cgr_enable(struct clk *clk) { u32 reg; @@ -359,7 +380,7 @@ DEFINE_CLOCK(i2c1_clk, 0, CCM_CGR1, 10, get_rate_ipg_per, NULL); DEFINE_CLOCK(i2c2_clk, 1, CCM_CGR1, 12, get_rate_ipg_per, NULL); DEFINE_CLOCK(i2c3_clk, 2, CCM_CGR1, 14, get_rate_ipg_per, NULL); DEFINE_CLOCK(iomuxc_clk, 0, CCM_CGR1, 16, NULL, NULL); -DEFINE_CLOCK(ipu_clk, 0, CCM_CGR1, 18, get_rate_ahb, NULL); +DEFINE_CLOCK(ipu_clk, 0, CCM_CGR1, 18, get_rate_hsp, NULL); DEFINE_CLOCK(kpp_clk, 0, CCM_CGR1, 20, get_rate_ipg, NULL); DEFINE_CLOCK(mlb_clk, 0, CCM_CGR1, 22, get_rate_ahb, NULL); DEFINE_CLOCK(mshc_clk, 0, CCM_CGR1, 24, get_rate_mshc, NULL); @@ -485,10 +506,10 @@ static struct clk_lookup lookups[] = { int __init mx35_clocks_init() { - unsigned int ll = 0; + unsigned int cgr2 = 3 << 26, cgr3 = 0; #if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC) - ll = (3 << 16); + cgr2 |= 3 << 16; #endif clkdev_add_table(lookups, ARRAY_SIZE(lookups)); @@ -499,8 +520,20 @@ int __init mx35_clocks_init() __raw_writel((3 << 18), CCM_BASE + CCM_CGR0); __raw_writel((3 << 2) | (3 << 4) | (3 << 6) | (3 << 8) | (3 << 16), CCM_BASE + CCM_CGR1); - __raw_writel((3 << 26) | ll, CCM_BASE + CCM_CGR2); - __raw_writel(0, CCM_BASE + CCM_CGR3); + + /* + * Check if we came up in internal boot mode. If yes, we need some + * extra clocks turned on, otherwise the MX35 boot ROM code will + * hang after a watchdog reset. + */ + if (!(__raw_readl(CCM_BASE + CCM_RCSR) & (3 << 10))) { + /* Additionally turn on UART1, SCC, and IIM clocks */ + cgr2 |= 3 << 16 | 3 << 4; + cgr3 |= 3 << 2; + } + + __raw_writel(cgr2, CCM_BASE + CCM_CGR2); + __raw_writel(cgr3, CCM_BASE + CCM_CGR3); mxc_timer_init(&gpt_clk, MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT); diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c index 1dc5004df866..f8f15e3ac7a0 100644 --- a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c +++ b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c @@ -216,7 +216,7 @@ struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata = { * Add platform devices present on this baseboard and init * them from CPU side as far as required to use them later on */ -void __init eukrea_mbimxsd_baseboard_init(void) +void __init eukrea_mbimxsd35_baseboard_init(void) { if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads, ARRAY_SIZE(eukrea_mbimxsd_pads))) diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c index 9770a6a973be..2a4f8b781ba4 100644 --- a/arch/arm/mach-mx3/mach-cpuimx35.c +++ b/arch/arm/mach-mx3/mach-cpuimx35.c @@ -201,8 +201,8 @@ static void __init mxc_board_init(void) if (!otg_mode_host) mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata); -#ifdef CONFIG_MACH_EUKREA_MBIMXSD_BASEBOARD - eukrea_mbimxsd_baseboard_init(); +#ifdef CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD + eukrea_mbimxsd35_baseboard_init(); #endif } diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c index 6af69def357f..57c10a9926cc 100644 --- a/arch/arm/mach-mx5/clock-mx51.c +++ b/arch/arm/mach-mx5/clock-mx51.c @@ -56,7 +56,7 @@ static void _clk_ccgr_disable(struct clk *clk) { u32 reg; reg = __raw_readl(clk->enable_reg); - reg &= ~(MXC_CCM_CCGRx_MOD_OFF << clk->enable_shift); + reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift); __raw_writel(reg, clk->enable_reg); } diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c index 268a9bc6be8a..50d5939a78f1 100644 --- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c +++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c @@ -398,7 +398,7 @@ static int pxa_set_target(struct cpufreq_policy *policy, return 0; } -static __init int pxa_cpufreq_init(struct cpufreq_policy *policy) +static int pxa_cpufreq_init(struct cpufreq_policy *policy) { int i; unsigned int freq; diff --git a/arch/arm/mach-pxa/cpufreq-pxa3xx.c b/arch/arm/mach-pxa/cpufreq-pxa3xx.c index 27fa329d9a8b..0a0d0fe99220 100644 --- a/arch/arm/mach-pxa/cpufreq-pxa3xx.c +++ b/arch/arm/mach-pxa/cpufreq-pxa3xx.c @@ -204,7 +204,7 @@ static int pxa3xx_cpufreq_set(struct cpufreq_policy *policy, return 0; } -static __init int pxa3xx_cpufreq_init(struct cpufreq_policy *policy) +static int pxa3xx_cpufreq_init(struct cpufreq_policy *policy) { int ret = -EINVAL; diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h index 7139e0dc26d1..4e1287070d21 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h @@ -71,10 +71,10 @@ #define GPIO46_CI_DD_7 MFP_CFG_DRV(GPIO46, AF0, DS04X) #define GPIO47_CI_DD_8 MFP_CFG_DRV(GPIO47, AF1, DS04X) #define GPIO48_CI_DD_9 MFP_CFG_DRV(GPIO48, AF1, DS04X) -#define GPIO52_CI_HSYNC MFP_CFG_DRV(GPIO52, AF0, DS04X) -#define GPIO51_CI_VSYNC MFP_CFG_DRV(GPIO51, AF0, DS04X) #define GPIO49_CI_MCLK MFP_CFG_DRV(GPIO49, AF0, DS04X) #define GPIO50_CI_PCLK MFP_CFG_DRV(GPIO50, AF0, DS04X) +#define GPIO51_CI_HSYNC MFP_CFG_DRV(GPIO51, AF0, DS04X) +#define GPIO52_CI_VSYNC MFP_CFG_DRV(GPIO52, AF0, DS04X) /* KEYPAD */ #define GPIO3_KP_DKIN_6 MFP_CFG_LPM(GPIO3, AF2, FLOAT) diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 5e16b4c69222..ae416fe7daf2 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -3,7 +3,7 @@ # # Common objects -obj-y := timer.o console.o clock.o +obj-y := timer.o console.o clock.o pm_runtime.o # CPU objects obj-$(CONFIG_ARCH_SH7367) += setup-sh7367.o clock-sh7367.o intc-sh7367.o diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 23d472f9525e..95935c83c306 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -25,6 +25,7 @@ #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/mfd/sh_mobile_sdhi.h> +#include <linux/mfd/tmio.h> #include <linux/mmc/host.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -39,6 +40,7 @@ #include <linux/sh_clk.h> #include <linux/gpio.h> #include <linux/input.h> +#include <linux/leds.h> #include <linux/input/sh_keysc.h> #include <linux/usb/r8a66597.h> @@ -307,6 +309,7 @@ static struct sh_mobile_sdhi_info sdhi1_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, .tmio_ocr_mask = MMC_VDD_165_195, + .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE, }; static struct resource sdhi1_resources[] = { @@ -558,7 +561,7 @@ static struct resource fsi_resources[] = { static struct platform_device fsi_device = { .name = "sh_fsi2", - .id = 0, + .id = -1, .num_resources = ARRAY_SIZE(fsi_resources), .resource = fsi_resources, .dev = { @@ -650,7 +653,44 @@ static struct platform_device hdmi_device = { }, }; +static struct gpio_led ap4evb_leds[] = { + { + .name = "led4", + .gpio = GPIO_PORT185, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, + { + .name = "led2", + .gpio = GPIO_PORT186, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, + { + .name = "led3", + .gpio = GPIO_PORT187, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, + { + .name = "led1", + .gpio = GPIO_PORT188, + .default_state = LEDS_GPIO_DEFSTATE_ON, + } +}; + +static struct gpio_led_platform_data ap4evb_leds_pdata = { + .num_leds = ARRAY_SIZE(ap4evb_leds), + .leds = ap4evb_leds, +}; + +static struct platform_device leds_device = { + .name = "leds-gpio", + .id = 0, + .dev = { + .platform_data = &ap4evb_leds_pdata, + }, +}; + static struct platform_device *ap4evb_devices[] __initdata = { + &leds_device, &nor_flash_device, &smc911x_device, &sdhi0_device, @@ -840,20 +880,6 @@ static void __init ap4evb_init(void) gpio_request(GPIO_FN_CS5A, NULL); gpio_request(GPIO_FN_IRQ6_39, NULL); - /* enable LED 1 - 4 */ - gpio_request(GPIO_PORT185, NULL); - gpio_request(GPIO_PORT186, NULL); - gpio_request(GPIO_PORT187, NULL); - gpio_request(GPIO_PORT188, NULL); - gpio_direction_output(GPIO_PORT185, 1); - gpio_direction_output(GPIO_PORT186, 1); - gpio_direction_output(GPIO_PORT187, 1); - gpio_direction_output(GPIO_PORT188, 1); - gpio_export(GPIO_PORT185, 0); - gpio_export(GPIO_PORT186, 0); - gpio_export(GPIO_PORT187, 0); - gpio_export(GPIO_PORT188, 0); - /* enable Debug switch (S6) */ gpio_request(GPIO_PORT32, NULL); gpio_request(GPIO_PORT33, NULL); diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index fb4e9b1d788e..759468992ad2 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -286,7 +286,6 @@ static struct clk_ops pllc2_clk_ops = { struct clk pllc2_clk = { .ops = &pllc2_clk_ops, - .flags = CLK_ENABLE_ON_INIT, .parent = &extal1_div2_clk, .freq_table = pllc2_freq_table, .parent_table = pllc2_parent, @@ -395,7 +394,7 @@ static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = { enum { MSTP001, MSTP131, MSTP130, - MSTP129, MSTP128, + MSTP129, MSTP128, MSTP127, MSTP126, MSTP118, MSTP117, MSTP116, MSTP106, MSTP101, MSTP100, MSTP223, @@ -413,6 +412,8 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP130] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 30, 0), /* VEU2 */ [MSTP129] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 29, 0), /* VEU1 */ [MSTP128] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 28, 0), /* VEU0 */ + [MSTP127] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 27, 0), /* CEU */ + [MSTP126] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 26, 0), /* CSI2 */ [MSTP118] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 18, 0), /* DSITX */ [MSTP117] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 17, 0), /* LCDC1 */ [MSTP116] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 16, 0), /* IIC0 */ @@ -428,7 +429,7 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP201] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */ [MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */ [MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */ - [MSTP328] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR3, 28, CLK_ENABLE_ON_INIT), /* FSIA */ + [MSTP328] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR3, 28, 0), /* FSIA */ [MSTP323] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 23, 0), /* IIC1 */ [MSTP322] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 22, 0), /* USB0 */ [MSTP314] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 14, 0), /* SDHI0 */ @@ -498,6 +499,8 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("uio_pdrv_genirq.3", &mstp_clks[MSTP130]), /* VEU2 */ CLKDEV_DEV_ID("uio_pdrv_genirq.2", &mstp_clks[MSTP129]), /* VEU1 */ CLKDEV_DEV_ID("uio_pdrv_genirq.1", &mstp_clks[MSTP128]), /* VEU0 */ + CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[MSTP127]), /* CEU */ + CLKDEV_DEV_ID("sh-mobile-csi2.0", &mstp_clks[MSTP126]), /* CSI2 */ CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX */ CLKDEV_DEV_ID("sh_mobile_lcdc_fb.1", &mstp_clks[MSTP117]), /* LCDC1 */ CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* IIC0 */ diff --git a/arch/arm/mach-shmobile/clock.c b/arch/arm/mach-shmobile/clock.c index b7c705a213a2..6b7c7c42bc8f 100644 --- a/arch/arm/mach-shmobile/clock.c +++ b/arch/arm/mach-shmobile/clock.c @@ -1,8 +1,10 @@ /* - * SH-Mobile Timer + * SH-Mobile Clock Framework * * Copyright (C) 2010 Magnus Damm * + * Used together with arch/arm/common/clkdev.c and drivers/sh/clk.c. + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. diff --git a/arch/arm/mach-shmobile/pm_runtime.c b/arch/arm/mach-shmobile/pm_runtime.c new file mode 100644 index 000000000000..94912d3944d3 --- /dev/null +++ b/arch/arm/mach-shmobile/pm_runtime.c @@ -0,0 +1,169 @@ +/* + * arch/arm/mach-shmobile/pm_runtime.c + * + * Runtime PM support code for SuperH Mobile ARM + * + * Copyright (C) 2009-2010 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/pm_runtime.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/sh_clk.h> +#include <linux/bitmap.h> + +#ifdef CONFIG_PM_RUNTIME +#define BIT_ONCE 0 +#define BIT_ACTIVE 1 +#define BIT_CLK_ENABLED 2 + +struct pm_runtime_data { + unsigned long flags; + struct clk *clk; +}; + +static void __devres_release(struct device *dev, void *res) +{ + struct pm_runtime_data *prd = res; + + dev_dbg(dev, "__devres_release()\n"); + + if (test_bit(BIT_CLK_ENABLED, &prd->flags)) + clk_disable(prd->clk); + + if (test_bit(BIT_ACTIVE, &prd->flags)) + clk_put(prd->clk); +} + +static struct pm_runtime_data *__to_prd(struct device *dev) +{ + return devres_find(dev, __devres_release, NULL, NULL); +} + +static void platform_pm_runtime_init(struct device *dev, + struct pm_runtime_data *prd) +{ + if (prd && !test_and_set_bit(BIT_ONCE, &prd->flags)) { + prd->clk = clk_get(dev, NULL); + if (!IS_ERR(prd->clk)) { + set_bit(BIT_ACTIVE, &prd->flags); + dev_info(dev, "clocks managed by runtime pm\n"); + } + } +} + +static void platform_pm_runtime_bug(struct device *dev, + struct pm_runtime_data *prd) +{ + if (prd && !test_and_set_bit(BIT_ONCE, &prd->flags)) + dev_err(dev, "runtime pm suspend before resume\n"); +} + +int platform_pm_runtime_suspend(struct device *dev) +{ + struct pm_runtime_data *prd = __to_prd(dev); + + dev_dbg(dev, "platform_pm_runtime_suspend()\n"); + + platform_pm_runtime_bug(dev, prd); + + if (prd && test_bit(BIT_ACTIVE, &prd->flags)) { + clk_disable(prd->clk); + clear_bit(BIT_CLK_ENABLED, &prd->flags); + } + + return 0; +} + +int platform_pm_runtime_resume(struct device *dev) +{ + struct pm_runtime_data *prd = __to_prd(dev); + + dev_dbg(dev, "platform_pm_runtime_resume()\n"); + + platform_pm_runtime_init(dev, prd); + + if (prd && test_bit(BIT_ACTIVE, &prd->flags)) { + clk_enable(prd->clk); + set_bit(BIT_CLK_ENABLED, &prd->flags); + } + + return 0; +} + +int platform_pm_runtime_idle(struct device *dev) +{ + /* suspend synchronously to disable clocks immediately */ + return pm_runtime_suspend(dev); +} + +static int platform_bus_notify(struct notifier_block *nb, + unsigned long action, void *data) +{ + struct device *dev = data; + struct pm_runtime_data *prd; + + dev_dbg(dev, "platform_bus_notify() %ld !\n", action); + + if (action == BUS_NOTIFY_BIND_DRIVER) { + prd = devres_alloc(__devres_release, sizeof(*prd), GFP_KERNEL); + if (prd) + devres_add(dev, prd); + else + dev_err(dev, "unable to alloc memory for runtime pm\n"); + } + + return 0; +} + +#else /* CONFIG_PM_RUNTIME */ + +static int platform_bus_notify(struct notifier_block *nb, + unsigned long action, void *data) +{ + struct device *dev = data; + struct clk *clk; + + dev_dbg(dev, "platform_bus_notify() %ld !\n", action); + + switch (action) { + case BUS_NOTIFY_BIND_DRIVER: + clk = clk_get(dev, NULL); + if (!IS_ERR(clk)) { + clk_enable(clk); + clk_put(clk); + dev_info(dev, "runtime pm disabled, clock forced on\n"); + } + break; + case BUS_NOTIFY_UNBOUND_DRIVER: + clk = clk_get(dev, NULL); + if (!IS_ERR(clk)) { + clk_disable(clk); + clk_put(clk); + dev_info(dev, "runtime pm disabled, clock forced off\n"); + } + break; + } + + return 0; +} + +#endif /* CONFIG_PM_RUNTIME */ + +static struct notifier_block platform_bus_notifier = { + .notifier_call = platform_bus_notify +}; + +static int __init sh_pm_runtime_init(void) +{ + bus_register_notifier(&platform_bus_type, &platform_bus_notifier); + return 0; +} +core_initcall(sh_pm_runtime_init); diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 33c3f570aaa0..a0a2928ae4dd 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -398,7 +398,7 @@ config CPU_V6 # ARMv6k config CPU_32v6K bool "Support ARM V6K processor extensions" if !SMP - depends on CPU_V6 + depends on CPU_V6 || CPU_V7 default y if SMP && !(ARCH_MX3 || ARCH_OMAP2) help Say Y here if your ARMv6 processor supports the 'K' extension. diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index c704eed63c5d..4bc43e535d3b 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -229,6 +229,8 @@ __dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot) } } while (size -= PAGE_SIZE); + dsb(); + return (void *)c->vm_start; } return NULL; diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index 0527e65318f4..6785db4179b8 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -43,6 +43,7 @@ config ARCH_MXC91231 config ARCH_MX5 bool "MX5-based" select CPU_V7 + select ARM_L1_CACHE_SHIFT_6 help This enables support for systems based on the Freescale i.MX51 family diff --git a/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h b/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h index 634e3f4c454d..656acb45d434 100644 --- a/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h +++ b/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h @@ -37,9 +37,9 @@ * mach-mx5/eukrea_mbimx51-baseboard.c for cpuimx51 */ -extern void eukrea_mbimx25_baseboard_init(void); +extern void eukrea_mbimxsd25_baseboard_init(void); extern void eukrea_mbimx27_baseboard_init(void); -extern void eukrea_mbimx35_baseboard_init(void); +extern void eukrea_mbimxsd35_baseboard_init(void); extern void eukrea_mbimx51_baseboard_init(void); #endif diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c index b3da9aad4295..3703ab28257f 100644 --- a/arch/arm/plat-mxc/tzic.c +++ b/arch/arm/plat-mxc/tzic.c @@ -164,8 +164,9 @@ int tzic_enable_wake(int is_idle) return -EAGAIN; for (i = 0; i < 4; i++) { - v = is_idle ? __raw_readl(TZIC_ENSET0(i)) : wakeup_intr[i]; - __raw_writel(v, TZIC_WAKEUP0(i)); + v = is_idle ? __raw_readl(tzic_base + TZIC_ENSET0(i)) : + wakeup_intr[i]; + __raw_writel(v, tzic_base + TZIC_WAKEUP0(i)); } return 0; diff --git a/arch/arm/plat-pxa/pwm.c b/arch/arm/plat-pxa/pwm.c index 0732c6c8d511..ef32686feef9 100644 --- a/arch/arm/plat-pxa/pwm.c +++ b/arch/arm/plat-pxa/pwm.c @@ -176,7 +176,7 @@ static inline void __add_pwm(struct pwm_device *pwm) static int __devinit pwm_probe(struct platform_device *pdev) { - struct platform_device_id *id = platform_get_device_id(pdev); + const struct platform_device_id *id = platform_get_device_id(pdev); struct pwm_device *pwm, *secondary = NULL; struct resource *r; int ret = 0; diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 48cbdcb6bbd4..55590a4d87c9 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Mon Jul 12 21:10:14 2010 +# Last update: Thu Sep 9 22:43:01 2010 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -2622,7 +2622,7 @@ kraken MACH_KRAKEN KRAKEN 2634 gw2388 MACH_GW2388 GW2388 2635 jadecpu MACH_JADECPU JADECPU 2636 carlisle MACH_CARLISLE CARLISLE 2637 -lux_sf9 MACH_LUX_SFT9 LUX_SFT9 2638 +lux_sf9 MACH_LUX_SF9 LUX_SF9 2638 nemid_tb MACH_NEMID_TB NEMID_TB 2639 terrier MACH_TERRIER TERRIER 2640 turbot MACH_TURBOT TURBOT 2641 @@ -2950,3 +2950,97 @@ davinci_dm365_dvr MACH_DAVINCI_DM365_DVR DAVINCI_DM365_DVR 2963 netviz MACH_NETVIZ NETVIZ 2964 flexibity MACH_FLEXIBITY FLEXIBITY 2965 wlan_computer MACH_WLAN_COMPUTER WLAN_COMPUTER 2966 +lpc24xx MACH_LPC24XX LPC24XX 2967 +spica MACH_SPICA SPICA 2968 +gpsdisplay MACH_GPSDISPLAY GPSDISPLAY 2969 +bipnet MACH_BIPNET BIPNET 2970 +overo_ctu_inertial MACH_OVERO_CTU_INERTIAL OVERO_CTU_INERTIAL 2971 +davinci_dm355_mmm MACH_DAVINCI_DM355_MMM DAVINCI_DM355_MMM 2972 +pc9260_v2 MACH_PC9260_V2 PC9260_V2 2973 +ptx7545 MACH_PTX7545 PTX7545 2974 +tm_efdc MACH_TM_EFDC TM_EFDC 2975 +omap3_waldo1 MACH_OMAP3_WALDO1 OMAP3_WALDO1 2977 +flyer MACH_FLYER FLYER 2978 +tornado3240 MACH_TORNADO3240 TORNADO3240 2979 +soli_01 MACH_SOLI_01 SOLI_01 2980 +omapl138_europalc MACH_OMAPL138_EUROPALC OMAPL138_EUROPALC 2981 +helios_v1 MACH_HELIOS_V1 HELIOS_V1 2982 +netspace_lite_v2 MACH_NETSPACE_LITE_V2 NETSPACE_LITE_V2 2983 +ssc MACH_SSC SSC 2984 +premierwave_en MACH_PREMIERWAVE_EN PREMIERWAVE_EN 2985 +wasabi MACH_WASABI WASABI 2986 +vivow MACH_VIVOW VIVOW 2987 +mx50_rdp MACH_MX50_RDP MX50_RDP 2988 +universal MACH_UNIVERSAL UNIVERSAL 2989 +real6410 MACH_REAL6410 REAL6410 2990 +spx_sakura MACH_SPX_SAKURA SPX_SAKURA 2991 +ij3k_2440 MACH_IJ3K_2440 IJ3K_2440 2992 +omap3_bc10 MACH_OMAP3_BC10 OMAP3_BC10 2993 +thebe MACH_THEBE THEBE 2994 +rv082 MACH_RV082 RV082 2995 +armlguest MACH_ARMLGUEST ARMLGUEST 2996 +tjinc1000 MACH_TJINC1000 TJINC1000 2997 +dockstar MACH_DOCKSTAR DOCKSTAR 2998 +ax8008 MACH_AX8008 AX8008 2999 +gnet_sgce MACH_GNET_SGCE GNET_SGCE 3000 +pxwnas_500_1000 MACH_PXWNAS_500_1000 PXWNAS_500_1000 3001 +ea20 MACH_EA20 EA20 3002 +awm2 MACH_AWM2 AWM2 3003 +ti8148evm MACH_TI8148EVM TI8148EVM 3004 +tegra_seaboard MACH_TEGRA_SEABOARD TEGRA_SEABOARD 3005 +linkstation_chlv2 MACH_LINKSTATION_CHLV2 LINKSTATION_CHLV2 3006 +tera_pro2_rack MACH_TERA_PRO2_RACK TERA_PRO2_RACK 3007 +rubys MACH_RUBYS RUBYS 3008 +aquarius MACH_AQUARIUS AQUARIUS 3009 +mx53_ard MACH_MX53_ARD MX53_ARD 3010 +mx53_smd MACH_MX53_SMD MX53_SMD 3011 +lswxl MACH_LSWXL LSWXL 3012 +dove_avng_v3 MACH_DOVE_AVNG_V3 DOVE_AVNG_V3 3013 +sdi_ess_9263 MACH_SDI_ESS_9263 SDI_ESS_9263 3014 +jocpu550 MACH_JOCPU550 JOCPU550 3015 +msm8x60_rumi3 MACH_MSM8X60_RUMI3 MSM8X60_RUMI3 3016 +msm8x60_ffa MACH_MSM8X60_FFA MSM8X60_FFA 3017 +yanomami MACH_YANOMAMI YANOMAMI 3018 +gta04 MACH_GTA04 GTA04 3019 +cm_a510 MACH_CM_A510 CM_A510 3020 +omap3_rfs200 MACH_OMAP3_RFS200 OMAP3_RFS200 3021 +kx33xx MACH_KX33XX KX33XX 3022 +ptx7510 MACH_PTX7510 PTX7510 3023 +top9000 MACH_TOP9000 TOP9000 3024 +teenote MACH_TEENOTE TEENOTE 3025 +ts3 MACH_TS3 TS3 3026 +a0 MACH_A0 A0 3027 +fsm9xxx_surf MACH_FSM9XXX_SURF FSM9XXX_SURF 3028 +fsm9xxx_ffa MACH_FSM9XXX_FFA FSM9XXX_FFA 3029 +frrhwcdma60w MACH_FRRHWCDMA60W FRRHWCDMA60W 3030 +remus MACH_REMUS REMUS 3031 +at91cap7xdk MACH_AT91CAP7XDK AT91CAP7XDK 3032 +at91cap7stk MACH_AT91CAP7STK AT91CAP7STK 3033 +kt_sbc_sam9_1 MACH_KT_SBC_SAM9_1 KT_SBC_SAM9_1 3034 +oratisrouter MACH_ORATISROUTER ORATISROUTER 3035 +armada_xp_db MACH_ARMADA_XP_DB ARMADA_XP_DB 3036 +spdm MACH_SPDM SPDM 3037 +gtib MACH_GTIB GTIB 3038 +dgm3240 MACH_DGM3240 DGM3240 3039 +atlas_i_lpe MACH_ATLAS_I_LPE ATLAS_I_LPE 3040 +htcmega MACH_HTCMEGA HTCMEGA 3041 +tricorder MACH_TRICORDER TRICORDER 3042 +tx28 MACH_TX28 TX28 3043 +bstbrd MACH_BSTBRD BSTBRD 3044 +pwb3090 MACH_PWB3090 PWB3090 3045 +idea6410 MACH_IDEA6410 IDEA6410 3046 +qbc9263 MACH_QBC9263 QBC9263 3047 +borabora MACH_BORABORA BORABORA 3048 +valdez MACH_VALDEZ VALDEZ 3049 +ls9g20 MACH_LS9G20 LS9G20 3050 +mios_v1 MACH_MIOS_V1 MIOS_V1 3051 +s5pc110_crespo MACH_S5PC110_CRESPO S5PC110_CRESPO 3052 +controltek9g20 MACH_CONTROLTEK9G20 CONTROLTEK9G20 3053 +tin307 MACH_TIN307 TIN307 3054 +tin510 MACH_TIN510 TIN510 3055 +bluecheese MACH_BLUECHEESE BLUECHEESE 3057 +tem3x30 MACH_TEM3X30 TEM3X30 3058 +harvest_desoto MACH_HARVEST_DESOTO HARVEST_DESOTO 3059 +msm8x60_qrdc MACH_MSM8X60_QRDC MSM8X60_QRDC 3060 +spear900 MACH_SPEAR900 SPEAR900 3061 +pcontrol_g20 MACH_PCONTROL_G20 PCONTROL_G20 3062 |