diff options
Diffstat (limited to 'arch')
124 files changed, 436 insertions, 357 deletions
diff --git a/arch/Kconfig b/arch/Kconfig index 5a1779c93940..1455579791ec 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -319,13 +319,6 @@ config ARCH_WANT_OLD_COMPAT_IPC select ARCH_WANT_COMPAT_IPC_PARSE_VERSION bool -config HAVE_VIRT_TO_BUS - bool - help - An architecture should select this if it implements the - deprecated interface virt_to_bus(). All new architectures - should probably not select this. - config HAVE_ARCH_SECCOMP_FILTER bool help diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 5833aa441481..8a33ba01301f 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -9,7 +9,7 @@ config ALPHA select HAVE_PERF_EVENTS select HAVE_DMA_ATTRS select HAVE_GENERIC_HARDIRQS - select HAVE_VIRT_TO_BUS + select VIRT_TO_BUS select GENERIC_IRQ_PROBE select AUTO_IRQ_AFFINITY if SMP select GENERIC_IRQ_SHOW diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5b714695b01b..13b739469c51 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -49,7 +49,6 @@ config ARM select HAVE_REGS_AND_STACK_ACCESS_API select HAVE_SYSCALL_TRACEPOINTS select HAVE_UID16 - select HAVE_VIRT_TO_BUS select KTIME_SCALAR select PERF_USE_VMALLOC select RTC_LIB @@ -556,7 +555,6 @@ config ARCH_IXP4XX config ARCH_DOVE bool "Marvell Dove" select ARCH_REQUIRE_GPIOLIB - select COMMON_CLK_DOVE select CPU_V7 select GENERIC_CLOCKEVENTS select MIGHT_HAVE_PCI @@ -744,6 +742,7 @@ config ARCH_RPC select NEED_MACH_IO_H select NEED_MACH_MEMORY_H select NO_IOPORT + select VIRT_TO_BUS help On the Acorn Risc-PC, Linux can support the internal IDE disk and CD-ROM interface, serial and parallel port, and the floppy drive. @@ -879,6 +878,7 @@ config ARCH_SHARK select ISA_DMA select NEED_MACH_MEMORY_H select PCI + select VIRT_TO_BUS select ZONE_DMA help Support for the StrongARM based Digital DNARD machine, also known @@ -1006,12 +1006,12 @@ config ARCH_MULTI_V4_V5 bool config ARCH_MULTI_V6 - bool "ARMv6 based platforms (ARM11, Scorpion, ...)" + bool "ARMv6 based platforms (ARM11)" select ARCH_MULTI_V6_V7 select CPU_V6 config ARCH_MULTI_V7 - bool "ARMv7 based platforms (Cortex-A, PJ4, Krait)" + bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)" default y select ARCH_MULTI_V6_V7 select ARCH_VEXPRESS @@ -1462,10 +1462,6 @@ config ISA_DMA bool select ISA_DMA_API -config ARCH_NO_VIRT_TO_BUS - def_bool y - depends on !ARCH_RPC && !ARCH_NETWINDER && !ARCH_SHARK - # Select ISA DMA interface config ISA_DMA_API bool @@ -1657,13 +1653,16 @@ config LOCAL_TIMERS accounting to be spread across the timer interval, preventing a "thundering herd" at every timer tick. +# The GPIO number here must be sorted by descending number. In case of +# a multiplatform kernel, we just want the highest value required by the +# selected platforms. config ARCH_NR_GPIO int default 1024 if ARCH_SHMOBILE || ARCH_TEGRA - default 355 if ARCH_U8500 - default 264 if MACH_H4700 default 512 if SOC_OMAP5 + default 355 if ARCH_U8500 default 288 if ARCH_VT8500 || ARCH_SUNXI + default 264 if MACH_H4700 default 0 help Maximum number of GPIOs in the system. @@ -1887,8 +1886,9 @@ config XEN_DOM0 config XEN bool "Xen guest support on ARM (EXPERIMENTAL)" - depends on ARM && OF + depends on ARM && AEABI && OF depends on CPU_V7 && !CPU_V6 + depends on !GENERIC_ATOMIC64 help Say Y if you want to run Linux in a Virtual Machine on Xen on ARM. diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index acddddac7ee4..ecfcdba2d17c 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -492,7 +492,7 @@ config DEBUG_IMX_UART_PORT DEBUG_IMX31_UART || \ DEBUG_IMX35_UART || \ DEBUG_IMX51_UART || \ - DEBUG_IMX50_IMX53_UART || \ + DEBUG_IMX53_UART || \ DEBUG_IMX6Q_UART default 1 help diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 71768b8a1ab9..84aa2caf07ed 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -115,4 +115,4 @@ i: $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \ $(obj)/Image System.map "$(INSTALL_PATH)" -subdir- := bootp compressed +subdir- := bootp compressed dts diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index f8e4855bc9a5..070bba4f2585 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -64,5 +64,13 @@ status = "okay"; /* No CD or WP GPIOs */ }; + + usb@d0050000 { + status = "okay"; + }; + + usb@d0051000 { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 6f1acc75e155..5b708208b607 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -31,7 +31,6 @@ mpic: interrupt-controller@d0020000 { compatible = "marvell,mpic"; #interrupt-cells = <1>; - #address-cells = <1>; #size-cells = <1>; interrupt-controller; }; @@ -54,7 +53,7 @@ reg = <0xd0012000 0x100>; reg-shift = <2>; interrupts = <41>; - reg-io-width = <4>; + reg-io-width = <1>; status = "disabled"; }; serial@d0012100 { @@ -62,7 +61,7 @@ reg = <0xd0012100 0x100>; reg-shift = <2>; interrupts = <42>; - reg-io-width = <4>; + reg-io-width = <1>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index 1443949c165e..ca00d8326c87 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -46,7 +46,7 @@ reg = <0xd0012200 0x100>; reg-shift = <2>; interrupts = <43>; - reg-io-width = <4>; + reg-io-width = <1>; status = "disabled"; }; serial@d0012300 { @@ -54,7 +54,7 @@ reg = <0xd0012300 0x100>; reg-shift = <2>; interrupts = <44>; - reg-io-width = <4>; + reg-io-width = <1>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index aa98e641931f..a98c0d50fbbe 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -238,8 +238,32 @@ nand { pinctrl_nand: nand-0 { atmel,pins = - <3 4 0x0 0x1 /* PD5 gpio RDY pin pull_up */ - 3 5 0x0 0x1>; /* PD4 gpio enable pin pull_up */ + <3 0 0x1 0x0 /* PD0 periph A Read Enable */ + 3 1 0x1 0x0 /* PD1 periph A Write Enable */ + 3 2 0x1 0x0 /* PD2 periph A Address Latch Enable */ + 3 3 0x1 0x0 /* PD3 periph A Command Latch Enable */ + 3 4 0x0 0x1 /* PD4 gpio Chip Enable pin pull_up */ + 3 5 0x0 0x1 /* PD5 gpio RDY/BUSY pin pull_up */ + 3 6 0x1 0x0 /* PD6 periph A Data bit 0 */ + 3 7 0x1 0x0 /* PD7 periph A Data bit 1 */ + 3 8 0x1 0x0 /* PD8 periph A Data bit 2 */ + 3 9 0x1 0x0 /* PD9 periph A Data bit 3 */ + 3 10 0x1 0x0 /* PD10 periph A Data bit 4 */ + 3 11 0x1 0x0 /* PD11 periph A Data bit 5 */ + 3 12 0x1 0x0 /* PD12 periph A Data bit 6 */ + 3 13 0x1 0x0>; /* PD13 periph A Data bit 7 */ + }; + + pinctrl_nand_16bits: nand_16bits-0 { + atmel,pins = + <3 14 0x1 0x0 /* PD14 periph A Data bit 8 */ + 3 15 0x1 0x0 /* PD15 periph A Data bit 9 */ + 3 16 0x1 0x0 /* PD16 periph A Data bit 10 */ + 3 17 0x1 0x0 /* PD17 periph A Data bit 11 */ + 3 18 0x1 0x0 /* PD18 periph A Data bit 12 */ + 3 19 0x1 0x0 /* PD19 periph A Data bit 13 */ + 3 20 0x1 0x0 /* PD20 periph A Data bit 14 */ + 3 21 0x1 0x0>; /* PD21 periph A Data bit 15 */ }; }; diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index 4bf2a8774aa7..7e0481e2441a 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -105,7 +105,7 @@ compatible = "fixed-clock"; reg = <1>; #clock-cells = <0>; - clock-frequency = <150000000>; + clock-frequency = <250000000>; }; }; }; diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 69140ba99f46..9de93096601a 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -319,9 +319,8 @@ }; }; - ab8500@5 { + ab8500 { compatible = "stericsson,ab8500"; - reg = <5>; /* mailbox 5 is i2c */ interrupt-parent = <&intc>; interrupts = <0 40 0x4>; interrupt-controller; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 67dbe20868a2..f7509cafc377 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -197,6 +197,11 @@ status = "disabled"; }; + rtc@d8500 { + compatible = "marvell,orion-rtc"; + reg = <0xd8500 0x20>; + }; + crypto: crypto@30000 { compatible = "marvell,orion-crypto"; reg = <0x30000 0x10000>, diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index e1347fceb5bc..1a62bcf18aa3 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -275,18 +275,27 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0x12680000 0x1000>; interrupts = <0 35 0>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; }; pdma1: pdma@12690000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x12690000 0x1000>; interrupts = <0 36 0>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; }; mdma1: mdma@12850000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x12850000 0x1000>; interrupts = <0 34 0>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; }; }; }; diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index 5f3562ad6746..9a99755920c0 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -142,12 +142,18 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0x120000 0x1000>; interrupts = <0 34 0>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; }; pdma1: pdma@121B0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x121000 0x1000>; interrupts = <0 35 0>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; }; }; diff --git a/arch/arm/boot/dts/href.dtsi b/arch/arm/boot/dts/href.dtsi index 592fb9dc35bd..379128eb9d98 100644 --- a/arch/arm/boot/dts/href.dtsi +++ b/arch/arm/boot/dts/href.dtsi @@ -221,7 +221,7 @@ }; }; - ab8500@5 { + ab8500 { ab8500-regulators { ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { regulator-name = "V-DISPLAY"; diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts index 55f4191a626e..2b587a74b813 100644 --- a/arch/arm/boot/dts/hrefv60plus.dts +++ b/arch/arm/boot/dts/hrefv60plus.dts @@ -158,7 +158,7 @@ }; }; - ab8500@5 { + ab8500 { ab8500-regulators { ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { regulator-name = "V-DISPLAY"; diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts index e54fffd48369..468c0a1d48d9 100644 --- a/arch/arm/boot/dts/imx53-mba53.dts +++ b/arch/arm/boot/dts/imx53-mba53.dts @@ -42,10 +42,9 @@ fsl,pins = <689 0x10000 /* DISP1_DRDY */ 482 0x10000 /* DISP1_HSYNC */ 489 0x10000 /* DISP1_VSYNC */ - 684 0x10000 /* DISP1_DAT_0 */ 515 0x10000 /* DISP1_DAT_22 */ 523 0x10000 /* DISP1_DAT_23 */ - 543 0x10000 /* DISP1_DAT_21 */ + 545 0x10000 /* DISP1_DAT_21 */ 553 0x10000 /* DISP1_DAT_20 */ 558 0x10000 /* DISP1_DAT_19 */ 564 0x10000 /* DISP1_DAT_18 */ diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/kirkwood-dns320.dts index 5bb0bf39d3b8..c9c44b2f62d7 100644 --- a/arch/arm/boot/dts/kirkwood-dns320.dts +++ b/arch/arm/boot/dts/kirkwood-dns320.dts @@ -42,12 +42,10 @@ ocp@f1000000 { serial@12000 { - clock-frequency = <166666667>; status = "okay"; }; serial@12100 { - clock-frequency = <166666667>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts index d430713ea9b9..e4e4930dc5cf 100644 --- a/arch/arm/boot/dts/kirkwood-dns325.dts +++ b/arch/arm/boot/dts/kirkwood-dns325.dts @@ -50,7 +50,6 @@ }; }; serial@12000 { - clock-frequency = <200000000>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts index 2e3dd34e21a5..0196cf6b0ef2 100644 --- a/arch/arm/boot/dts/kirkwood-dockstar.dts +++ b/arch/arm/boot/dts/kirkwood-dockstar.dts @@ -37,7 +37,6 @@ }; }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts index ef2d8c705709..289e51d86372 100644 --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts @@ -38,7 +38,6 @@ }; }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts index 1b133e0c566e..bd83b8fc7c83 100644 --- a/arch/arm/boot/dts/kirkwood-goflexnet.dts +++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts @@ -73,7 +73,6 @@ }; }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts index 71902da33d63..5335b1aa8601 100644 --- a/arch/arm/boot/dts/kirkwood-ib62x0.dts +++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts @@ -51,7 +51,6 @@ }; }; serial@12000 { - clock-frequency = <200000000>; status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index 504f16be8b54..12ccf74ac3c4 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -78,7 +78,6 @@ }; }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts index 6cae4599c4b3..93c3afbef9ee 100644 --- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts +++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts @@ -115,7 +115,6 @@ }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts index 8db3123ac80f..5bbd0542cdd3 100644 --- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts +++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts @@ -34,7 +34,6 @@ }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood-lschlv2.dts b/arch/arm/boot/dts/kirkwood-lschlv2.dts index 9510c9ea666c..9f55d95f35f5 100644 --- a/arch/arm/boot/dts/kirkwood-lschlv2.dts +++ b/arch/arm/boot/dts/kirkwood-lschlv2.dts @@ -13,7 +13,6 @@ ocp@f1000000 { serial@12000 { - clock-frequency = <166666667>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-lsxhl.dts b/arch/arm/boot/dts/kirkwood-lsxhl.dts index 739019c4cba9..5c84c118ed8d 100644 --- a/arch/arm/boot/dts/kirkwood-lsxhl.dts +++ b/arch/arm/boot/dts/kirkwood-lsxhl.dts @@ -13,7 +13,6 @@ ocp@f1000000 { serial@12000 { - clock-frequency = <200000000>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts index 662dfd81b1ce..758824118a9a 100644 --- a/arch/arm/boot/dts/kirkwood-mplcec4.dts +++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts @@ -90,7 +90,6 @@ }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi index e8e7ecef1650..6affd924fe11 100644 --- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi @@ -23,7 +23,6 @@ }; serial@12000 { - clock-frequency = <166666667>; status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts index 3a178cf708d7..a7412b937a8a 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310.dts +++ b/arch/arm/boot/dts/kirkwood-nsa310.dts @@ -117,7 +117,6 @@ }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts index ede7fe0d7a87..d27f7245f8e7 100644 --- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts +++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts @@ -18,12 +18,10 @@ ocp@f1000000 { serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; serial@12100 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts index 842ff95d60df..66eb45b00b25 100644 --- a/arch/arm/boot/dts/kirkwood-topkick.dts +++ b/arch/arm/boot/dts/kirkwood-topkick.dts @@ -108,7 +108,6 @@ }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 2c738d9dc82a..fada7e6d24d8 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -38,6 +38,7 @@ interrupt-controller; #interrupt-cells = <2>; interrupts = <35>, <36>, <37>, <38>; + clocks = <&gate_clk 7>; }; gpio1: gpio@10140 { @@ -49,6 +50,7 @@ interrupt-controller; #interrupt-cells = <2>; interrupts = <39>, <40>, <41>; + clocks = <&gate_clk 7>; }; serial@12000 { @@ -57,7 +59,6 @@ reg-shift = <2>; interrupts = <33>; clocks = <&gate_clk 7>; - /* set clock-frequency in board dts */ status = "disabled"; }; @@ -67,7 +68,6 @@ reg-shift = <2>; interrupts = <34>; clocks = <&gate_clk 7>; - /* set clock-frequency in board dts */ status = "disabled"; }; @@ -75,6 +75,7 @@ compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; reg = <0x10300 0x20>; interrupts = <53>; + clocks = <&gate_clk 7>; }; spi@10600 { diff --git a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts index 5a3a58b7e18f..0077fc8510b7 100644 --- a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts +++ b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts @@ -11,7 +11,7 @@ / { model = "LaCie Ethernet Disk mini V2"; - compatible = "lacie,ethernet-disk-mini-v2", "marvell-orion5x-88f5182", "marvell,orion5x"; + compatible = "lacie,ethernet-disk-mini-v2", "marvell,orion5x-88f5182", "marvell,orion5x"; memory { reg = <0x00000000 0x4000000>; /* 64 MB */ diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts index 27f31a5fa494..d3ec32f6b790 100644 --- a/arch/arm/boot/dts/snowball.dts +++ b/arch/arm/boot/dts/snowball.dts @@ -298,7 +298,7 @@ }; }; - ab8500@5 { + ab8500 { ab8500-regulators { ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { regulator-name = "V-DISPLAY"; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 936d2306e7e1..7e8769bd5977 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -75,6 +75,9 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0xffe01000 0x1000>; interrupts = <0 180 4>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; }; }; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 9a428931d042..48d00a099ce3 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -118,6 +118,7 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0x50040600 0x20>; interrupts = <1 13 0x304>; + clocks = <&tegra_car 132>; }; intc: interrupt-controller { diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 767803e1fd55..9d87a3ffe998 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -119,6 +119,7 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0x50040600 0x20>; interrupts = <1 13 0xf04>; + clocks = <&tegra_car 214>; }; intc: interrupt-controller { diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index fbbc5bb022d5..6a99e30f81d2 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -116,6 +116,7 @@ CONFIG_SND_SOC=y CONFIG_SND_MXS_SOC=y CONFIG_SND_SOC_MXS_SGTL5000=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_CHIPIDEA=y CONFIG_USB_CHIPIDEA_HOST=y CONFIG_USB_STORAGE=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index b16bae2c9a60..bd07864f14a0 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -126,6 +126,8 @@ CONFIG_INPUT_MISC=y CONFIG_INPUT_TWL4030_PWRBUTTON=y CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=32 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y diff --git a/arch/arm/include/asm/xen/events.h b/arch/arm/include/asm/xen/events.h index 5c27696de14f..8b1f37bfeeec 100644 --- a/arch/arm/include/asm/xen/events.h +++ b/arch/arm/include/asm/xen/events.h @@ -2,6 +2,7 @@ #define _ASM_ARM_XEN_EVENTS_H #include <asm/ptrace.h> +#include <asm/atomic.h> enum ipi_vector { XEN_PLACEHOLDER_VECTOR, @@ -15,26 +16,8 @@ static inline int xen_irqs_disabled(struct pt_regs *regs) return raw_irqs_disabled_flags(regs->ARM_cpsr); } -/* - * We cannot use xchg because it does not support 8-byte - * values. However it is safe to use {ldr,dtd}exd directly because all - * platforms which Xen can run on support those instructions. - */ -static inline xen_ulong_t xchg_xen_ulong(xen_ulong_t *ptr, xen_ulong_t val) -{ - xen_ulong_t oldval; - unsigned int tmp; - - wmb(); - asm volatile("@ xchg_xen_ulong\n" - "1: ldrexd %0, %H0, [%3]\n" - " strexd %1, %2, %H2, [%3]\n" - " teq %1, #0\n" - " bne 1b" - : "=&r" (oldval), "=&r" (tmp) - : "r" (val), "r" (ptr) - : "memory", "cc"); - return oldval; -} +#define xchg_xen_ulong(ptr, val) atomic64_xchg(container_of((ptr), \ + atomic64_t, \ + counter), (val)) #endif /* _ASM_ARM_XEN_EVENTS_H */ diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 31644f1978d5..79078edbb9bc 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -480,7 +480,7 @@ static void __cpuinit broadcast_timer_setup(struct clock_event_device *evt) evt->features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_DUMMY; - evt->rating = 400; + evt->rating = 100; evt->mult = 1; evt->set_mode = broadcast_timer_set_mode; diff --git a/arch/arm/lib/memset.S b/arch/arm/lib/memset.S index d912e7397ecc..94b0650ea98f 100644 --- a/arch/arm/lib/memset.S +++ b/arch/arm/lib/memset.S @@ -14,31 +14,15 @@ .text .align 5 - .word 0 - -1: subs r2, r2, #4 @ 1 do we have enough - blt 5f @ 1 bytes to align with? - cmp r3, #2 @ 1 - strltb r1, [ip], #1 @ 1 - strleb r1, [ip], #1 @ 1 - strb r1, [ip], #1 @ 1 - add r2, r2, r3 @ 1 (r2 = r2 - (4 - r3)) -/* - * The pointer is now aligned and the length is adjusted. Try doing the - * memset again. - */ ENTRY(memset) -/* - * Preserve the contents of r0 for the return value. - */ - mov ip, r0 - ands r3, ip, #3 @ 1 unaligned? - bne 1b @ 1 + ands r3, r0, #3 @ 1 unaligned? + mov ip, r0 @ preserve r0 as return value + bne 6f @ 1 /* * we know that the pointer in ip is aligned to a word boundary. */ - orr r1, r1, r1, lsl #8 +1: orr r1, r1, r1, lsl #8 orr r1, r1, r1, lsl #16 mov r3, r1 cmp r2, #16 @@ -127,4 +111,13 @@ ENTRY(memset) tst r2, #1 strneb r1, [ip], #1 mov pc, lr + +6: subs r2, r2, #4 @ 1 do we have enough + blt 5b @ 1 bytes to align with? + cmp r3, #2 @ 1 + strltb r1, [ip], #1 @ 1 + strleb r1, [ip], #1 @ 1 + strb r1, [ip], #1 @ 1 + add r2, r2, r3 @ 1 (r2 = r2 - (4 - r3)) + b 1b ENDPROC(memset) diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c index 2ea7059b840b..c20a870ea9c9 100644 --- a/arch/arm/mach-at91/board-foxg20.c +++ b/arch/arm/mach-at91/board-foxg20.c @@ -176,6 +176,7 @@ static struct w1_gpio_platform_data w1_gpio_pdata = { /* If you choose to use a pin other than PB16 it needs to be 3.3V */ .pin = AT91_PIN_PB16, .is_open_drain = 1, + .ext_pullup_enable_pin = -EINVAL, }; static struct platform_device w1_device = { diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index a033b8df9fb2..869cbecf00b7 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -188,6 +188,7 @@ static struct spi_board_info portuxg20_spi_devices[] = { static struct w1_gpio_platform_data w1_gpio_pdata = { .pin = AT91_PIN_PA29, .is_open_drain = 1, + .ext_pullup_enable_pin = -EINVAL, }; static struct platform_device w1_device = { diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h index eed465ab0dd7..5fc23771c154 100644 --- a/arch/arm/mach-at91/include/mach/gpio.h +++ b/arch/arm/mach-at91/include/mach/gpio.h @@ -209,6 +209,14 @@ extern int at91_get_gpio_value(unsigned pin); extern void at91_gpio_suspend(void); extern void at91_gpio_resume(void); +#ifdef CONFIG_PINCTRL_AT91 +extern void at91_pinctrl_gpio_suspend(void); +extern void at91_pinctrl_gpio_resume(void); +#else +static inline void at91_pinctrl_gpio_suspend(void) {} +static inline void at91_pinctrl_gpio_resume(void) {} +#endif + #endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c index 8e210262aeee..e0ca59171022 100644 --- a/arch/arm/mach-at91/irq.c +++ b/arch/arm/mach-at91/irq.c @@ -92,23 +92,21 @@ static int at91_aic_set_wake(struct irq_data *d, unsigned value) void at91_irq_suspend(void) { - int i = 0, bit; + int bit = -1; if (has_aic5()) { /* disable enabled irqs */ - while ((bit = find_next_bit(backups, n_irqs, i)) < n_irqs) { + while ((bit = find_next_bit(backups, n_irqs, bit + 1)) < n_irqs) { at91_aic_write(AT91_AIC5_SSR, bit & AT91_AIC5_INTSEL_MSK); at91_aic_write(AT91_AIC5_IDCR, 1); - i = bit; } /* enable wakeup irqs */ - i = 0; - while ((bit = find_next_bit(wakeups, n_irqs, i)) < n_irqs) { + bit = -1; + while ((bit = find_next_bit(wakeups, n_irqs, bit + 1)) < n_irqs) { at91_aic_write(AT91_AIC5_SSR, bit & AT91_AIC5_INTSEL_MSK); at91_aic_write(AT91_AIC5_IECR, 1); - i = bit; } } else { at91_aic_write(AT91_AIC_IDCR, *backups); @@ -118,23 +116,21 @@ void at91_irq_suspend(void) void at91_irq_resume(void) { - int i = 0, bit; + int bit = -1; if (has_aic5()) { /* disable wakeup irqs */ - while ((bit = find_next_bit(wakeups, n_irqs, i)) < n_irqs) { + while ((bit = find_next_bit(wakeups, n_irqs, bit + 1)) < n_irqs) { at91_aic_write(AT91_AIC5_SSR, bit & AT91_AIC5_INTSEL_MSK); at91_aic_write(AT91_AIC5_IDCR, 1); - i = bit; } /* enable irqs disabled for suspend */ - i = 0; - while ((bit = find_next_bit(backups, n_irqs, i)) < n_irqs) { + bit = -1; + while ((bit = find_next_bit(backups, n_irqs, bit + 1)) < n_irqs) { at91_aic_write(AT91_AIC5_SSR, bit & AT91_AIC5_INTSEL_MSK); at91_aic_write(AT91_AIC5_IECR, 1); - i = bit; } } else { at91_aic_write(AT91_AIC_IDCR, *wakeups); diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index adb6db888a1f..73f1f250403a 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -201,7 +201,10 @@ extern u32 at91_slow_clock_sz; static int at91_pm_enter(suspend_state_t state) { - at91_gpio_suspend(); + if (of_have_populated_dt()) + at91_pinctrl_gpio_suspend(); + else + at91_gpio_suspend(); at91_irq_suspend(); pr_debug("AT91: PM - wake mask %08x, pm state %d\n", @@ -286,7 +289,10 @@ static int at91_pm_enter(suspend_state_t state) error: target_state = PM_SUSPEND_ON; at91_irq_resume(); - at91_gpio_resume(); + if (of_have_populated_dt()) + at91_pinctrl_gpio_resume(); + else + at91_gpio_resume(); return 0; } diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c index a685e9706b7b..45b7c71d9cc1 100644 --- a/arch/arm/mach-davinci/dma.c +++ b/arch/arm/mach-davinci/dma.c @@ -743,6 +743,9 @@ EXPORT_SYMBOL(edma_free_channel); */ int edma_alloc_slot(unsigned ctlr, int slot) { + if (!edma_cc[ctlr]) + return -EINVAL; + if (slot >= 0) slot = EDMA_CHAN_SLOT(slot); diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig index abda5a18a664..0f2111a11315 100644 --- a/arch/arm/mach-footbridge/Kconfig +++ b/arch/arm/mach-footbridge/Kconfig @@ -67,6 +67,7 @@ config ARCH_NETWINDER select ISA select ISA_DMA select PCI + select VIRT_TO_BUS help Say Y here if you intend to run this kernel on the Rebel.COM NetWinder. Information about this machine can be found at: diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c index 74e3a34d78b8..e13a8fa5e62c 100644 --- a/arch/arm/mach-imx/clk-imx35.c +++ b/arch/arm/mach-imx/clk-imx35.c @@ -264,6 +264,7 @@ int __init mx35_clocks_init(void) clk_prepare_enable(clk[gpio3_gate]); clk_prepare_enable(clk[iim_gate]); clk_prepare_enable(clk[emi_gate]); + clk_prepare_enable(clk[max_gate]); /* * SCC is needed to boot via mmc after a watchdog reset. The clock code diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 7b025ee528a5..2f9ff93a4e61 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -172,7 +172,7 @@ static struct clk *clk[clk_max]; static struct clk_onecell_data clk_data; static enum mx6q_clks const clks_init_on[] __initconst = { - mmdc_ch0_axi, rom, + mmdc_ch0_axi, rom, pll1_sys, }; static struct clk_div_table clk_enet_ref_table[] = { diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S index 921fc1555854..a58c8b0527cc 100644 --- a/arch/arm/mach-imx/headsmp.S +++ b/arch/arm/mach-imx/headsmp.S @@ -26,16 +26,16 @@ ENDPROC(v7_secondary_startup) #ifdef CONFIG_PM /* - * The following code is located into the .data section. This is to - * allow phys_l2x0_saved_regs to be accessed with a relative load - * as we are running on physical address here. + * The following code must assume it is running from physical address + * where absolute virtual addresses to the data section have to be + * turned into relative ones. */ - .data - .align #ifdef CONFIG_CACHE_L2X0 .macro pl310_resume - ldr r2, phys_l2x0_saved_regs + adr r0, l2x0_saved_regs_offset + ldr r2, [r0] + add r2, r2, r0 ldr r0, [r2, #L2X0_R_PHY_BASE] @ get physical base of l2x0 ldr r1, [r2, #L2X0_R_AUX_CTRL] @ get aux_ctrl value str r1, [r0, #L2X0_AUX_CTRL] @ restore aux_ctrl @@ -43,9 +43,9 @@ ENDPROC(v7_secondary_startup) str r1, [r0, #L2X0_CTRL] @ re-enable L2 .endm - .globl phys_l2x0_saved_regs -phys_l2x0_saved_regs: - .long 0 +l2x0_saved_regs_offset: + .word l2x0_saved_regs - . + #else .macro pl310_resume .endm diff --git a/arch/arm/mach-imx/imx25-dt.c b/arch/arm/mach-imx/imx25-dt.c index 03b65e5ea541..82348391582a 100644 --- a/arch/arm/mach-imx/imx25-dt.c +++ b/arch/arm/mach-imx/imx25-dt.c @@ -27,6 +27,11 @@ static const char * const imx25_dt_board_compat[] __initconst = { NULL }; +static void __init imx25_timer_init(void) +{ + mx25_clocks_init_dt(); +} + DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)") .map_io = mx25_map_io, .init_early = imx25_init_early, diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c index ee42d20cba19..5faba7a3c95f 100644 --- a/arch/arm/mach-imx/pm-imx6q.c +++ b/arch/arm/mach-imx/pm-imx6q.c @@ -22,8 +22,6 @@ #include "common.h" #include "hardware.h" -extern unsigned long phys_l2x0_saved_regs; - static int imx6q_suspend_finish(unsigned long val) { cpu_do_idle(); @@ -57,18 +55,5 @@ static const struct platform_suspend_ops imx6q_pm_ops = { void __init imx6q_pm_init(void) { - /* - * The l2x0 core code provides an infrastucture to save and restore - * l2x0 registers across suspend/resume cycle. But because imx6q - * retains L2 content during suspend and needs to resume L2 before - * MMU is enabled, it can only utilize register saving support and - * have to take care of restoring on its own. So we save physical - * address of the data structure used by l2x0 core to save registers, - * and later restore the necessary ones in imx6q resume entry. - */ -#ifdef CONFIG_CACHE_L2X0 - phys_l2x0_saved_regs = __pa(&l2x0_saved_regs); -#endif - suspend_set_ops(&imx6q_pm_ops); } diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c index d42730a1d4ab..d599e354ca57 100644 --- a/arch/arm/mach-ixp4xx/vulcan-setup.c +++ b/arch/arm/mach-ixp4xx/vulcan-setup.c @@ -163,6 +163,7 @@ static struct platform_device vulcan_max6369 = { static struct w1_gpio_platform_data vulcan_w1_gpio_pdata = { .pin = 14, + .ext_pullup_enable_pin = -EINVAL, }; static struct platform_device vulcan_w1_gpio = { diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index 2e73e9d53f70..d367aa6b47bb 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -41,16 +41,12 @@ static void __init kirkwood_legacy_clk_init(void) struct device_node *np = of_find_compatible_node( NULL, NULL, "marvell,kirkwood-gating-clock"); - struct of_phandle_args clkspec; + struct clk *clk; clkspec.np = np; clkspec.args_count = 1; - clkspec.args[0] = CGC_BIT_GE0; - orion_clkdev_add(NULL, "mv643xx_eth_port.0", - of_clk_get_from_provider(&clkspec)); - clkspec.args[0] = CGC_BIT_PEX0; orion_clkdev_add("0", "pcie", of_clk_get_from_provider(&clkspec)); @@ -59,9 +55,24 @@ static void __init kirkwood_legacy_clk_init(void) orion_clkdev_add("1", "pcie", of_clk_get_from_provider(&clkspec)); - clkspec.args[0] = CGC_BIT_GE1; - orion_clkdev_add(NULL, "mv643xx_eth_port.1", + clkspec.args[0] = CGC_BIT_SDIO; + orion_clkdev_add(NULL, "mvsdio", of_clk_get_from_provider(&clkspec)); + + /* + * The ethernet interfaces forget the MAC address assigned by + * u-boot if the clocks are turned off. Until proper DT support + * is available we always enable them for now. + */ + clkspec.args[0] = CGC_BIT_GE0; + clk = of_clk_get_from_provider(&clkspec); + orion_clkdev_add(NULL, "mv643xx_eth_port.0", clk); + clk_prepare_enable(clk); + + clkspec.args[0] = CGC_BIT_GE1; + clk = of_clk_get_from_provider(&clkspec); + orion_clkdev_add(NULL, "mv643xx_eth_port.1", clk); + clk_prepare_enable(clk); } static void __init kirkwood_of_clk_init(void) diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c index d1e2d595e79c..f62b68d926f4 100644 --- a/arch/arm/mach-mmp/gplugd.c +++ b/arch/arm/mach-mmp/gplugd.c @@ -9,6 +9,7 @@ */ #include <linux/init.h> +#include <linux/platform_device.h> #include <linux/gpio.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-mxs/icoll.c b/arch/arm/mach-mxs/icoll.c index 8fb23af154b3..e26eeba46598 100644 --- a/arch/arm/mach-mxs/icoll.c +++ b/arch/arm/mach-mxs/icoll.c @@ -100,7 +100,7 @@ static struct irq_domain_ops icoll_irq_domain_ops = { .xlate = irq_domain_xlate_onecell, }; -void __init icoll_of_init(struct device_node *np, +static void __init icoll_of_init(struct device_node *np, struct device_node *interrupt_parent) { /* diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index 052186713347..3218f1f2c0e0 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -402,17 +402,17 @@ static void __init cfa10049_init(void) { enable_clk_enet_out(); update_fec_mac_prop(OUI_CRYSTALFONTZ); + + mxsfb_pdata.mode_list = cfa10049_video_modes; + mxsfb_pdata.mode_count = ARRAY_SIZE(cfa10049_video_modes); + mxsfb_pdata.default_bpp = 32; + mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT; } static void __init cfa10037_init(void) { enable_clk_enet_out(); update_fec_mac_prop(OUI_CRYSTALFONTZ); - - mxsfb_pdata.mode_list = cfa10049_video_modes; - mxsfb_pdata.mode_count = ARRAY_SIZE(cfa10049_video_modes); - mxsfb_pdata.default_bpp = 32; - mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT; } static void __init apf28_init(void) diff --git a/arch/arm/mach-mxs/mm.c b/arch/arm/mach-mxs/mm.c index a4294aa9f301..e63b7d87acbd 100644 --- a/arch/arm/mach-mxs/mm.c +++ b/arch/arm/mach-mxs/mm.c @@ -18,6 +18,7 @@ #include <mach/mx23.h> #include <mach/mx28.h> +#include <mach/common.h> /* * Define the MX23 memory map. diff --git a/arch/arm/mach-mxs/ocotp.c b/arch/arm/mach-mxs/ocotp.c index 54add60f94c9..1dff46703753 100644 --- a/arch/arm/mach-mxs/ocotp.c +++ b/arch/arm/mach-mxs/ocotp.c @@ -19,6 +19,7 @@ #include <asm/processor.h> /* for cpu_relax() */ #include <mach/mxs.h> +#include <mach/common.h> #define OCOTP_WORD_OFFSET 0x20 #define OCOTP_WORD_COUNT 0x20 diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h index fb18831e88aa..14f7e9920479 100644 --- a/arch/arm/mach-omap1/common.h +++ b/arch/arm/mach-omap1/common.h @@ -31,6 +31,8 @@ #include <plat/i2c.h> +#include <mach/irqs.h> + #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) void omap7xx_map_io(void); #else diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 49ac3dfebef9..8111cd9ff3e5 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -311,9 +311,6 @@ config MACH_OMAP_ZOOM2 default y select OMAP_PACKAGE_CBB select REGULATOR_FIXED_VOLTAGE if REGULATOR - select SERIAL_8250 - select SERIAL_8250_CONSOLE - select SERIAL_CORE_CONSOLE config MACH_OMAP_ZOOM3 bool "OMAP3630 Zoom3 board" @@ -321,9 +318,6 @@ config MACH_OMAP_ZOOM3 default y select OMAP_PACKAGE_CBP select REGULATOR_FIXED_VOLTAGE if REGULATOR - select SERIAL_8250 - select SERIAL_8250_CONSOLE - select SERIAL_CORE_CONSOLE config MACH_CM_T35 bool "CompuLab CM-T35/CM-T3730 modules" diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 0274ff7a2a2b..e54a48060198 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -102,6 +102,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") .init_irq = omap_intc_of_init, .handle_irq = omap3_intc_handle_irq, .init_machine = omap_generic_init, + .init_late = omap3_init_late, .init_time = omap3_sync32k_timer_init, .dt_compat = omap3_boards_compat, .restart = omap3xxx_restart, @@ -119,6 +120,7 @@ DT_MACHINE_START(OMAP3_GP_DT, "Generic OMAP3-GP (Flattened Device Tree)") .init_irq = omap_intc_of_init, .handle_irq = omap3_intc_handle_irq, .init_machine = omap_generic_init, + .init_late = omap3_init_late, .init_time = omap3_secure_sync32k_timer_init, .dt_compat = omap3_gp_boards_compat, .restart = omap3xxx_restart, diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index f7c4616cbb60..d2ea68ea678a 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -17,6 +17,7 @@ #include <linux/io.h> #include <linux/gpio.h> #include <linux/leds.h> +#include <linux/usb/phy.h> #include <linux/usb/musb.h> #include <linux/platform_data/spi-omap2-mcspi.h> @@ -98,6 +99,7 @@ static void __init rx51_init(void) sdrc_params = nokia_get_sdram_timings(); omap_sdrc_init(sdrc_params, sdrc_params); + usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(&musb_board_data); rx51_peripherals_init(); diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 0a6b9c7a63da..40f4a03d728f 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -108,7 +108,6 @@ void omap35xx_init_late(void); void omap3630_init_late(void); void am35xx_init_late(void); void ti81xx_init_late(void); -void omap4430_init_late(void); int omap2_common_pm_late_init(void); #if defined(CONFIG_SOC_OMAP2420) || defined(CONFIG_SOC_OMAP2430) diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index e4b16c8efe8b..410e1bac7815 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -1122,9 +1122,6 @@ int gpmc_calc_timings(struct gpmc_timings *gpmc_t, /* TODO: remove, see function definition */ gpmc_convert_ps_to_ns(gpmc_t); - /* Now the GPMC is initialised, unreserve the chip-selects */ - gpmc_cs_map = 0; - return 0; } @@ -1383,6 +1380,9 @@ static int gpmc_probe(struct platform_device *pdev) if (IS_ERR_VALUE(gpmc_setup_irq())) dev_warn(gpmc_dev, "gpmc_setup_irq failed\n"); + /* Now the GPMC is initialised, unreserve the chip-selects */ + gpmc_cs_map = 0; + rc = gpmc_probe_dt(pdev); if (rc < 0) { clk_disable_unprepare(gpmc_l3_clk); diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 6a217c98db54..f82cf878d6af 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -211,8 +211,6 @@ static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition, return -EINVAL; } - pr_err("%s: Could not find signal %s\n", __func__, muxname); - return -ENODEV; } @@ -234,6 +232,8 @@ int __init omap_mux_get_by_name(const char *muxname, return mux_mode; } + pr_err("%s: Could not find signal %s\n", __func__, muxname); + return -ENODEV; } @@ -739,8 +739,9 @@ static void __init omap_mux_dbg_create_entry( list_for_each_entry(e, &partition->muxmodes, node) { struct omap_mux *m = &e->mux; - (void)debugfs_create_file(m->muxnames[0], S_IWUSR, mux_dbg_dir, - m, &omap_mux_dbg_signal_fops); + (void)debugfs_create_file(m->muxnames[0], S_IWUSR | S_IRUGO, + mux_dbg_dir, m, + &omap_mux_dbg_signal_fops); } } diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index af41888acbd6..969b0ba7fa70 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -505,6 +505,7 @@ static struct w1_gpio_platform_data w1_gpio_platform_data = { .pin = GPIO_ONE_WIRE, .is_open_drain = 0, .enable_external_pullup = w1_enable_external_pullup, + .ext_pullup_enable_pin = -EINVAL, }; struct platform_device raumfeld_w1_gpio_device = { diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c index fcdf52dbcc49..f051f53e35b7 100644 --- a/arch/arm/mach-s5pv210/clock.c +++ b/arch/arm/mach-s5pv210/clock.c @@ -214,11 +214,6 @@ static struct clk clk_pcmcdclk2 = { .name = "pcmcdclk", }; -static struct clk dummy_apb_pclk = { - .name = "apb_pclk", - .id = -1, -}; - static struct clk *clkset_vpllsrc_list[] = { [0] = &clk_fin_vpll, [1] = &clk_sclk_hdmi27m, @@ -305,18 +300,6 @@ static struct clk_ops clk_fout_apll_ops = { static struct clk init_clocks_off[] = { { - .name = "dma", - .devname = "dma-pl330.0", - .parent = &clk_hclk_psys.clk, - .enable = s5pv210_clk_ip0_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "dma", - .devname = "dma-pl330.1", - .parent = &clk_hclk_psys.clk, - .enable = s5pv210_clk_ip0_ctrl, - .ctrlbit = (1 << 4), - }, { .name = "rot", .parent = &clk_hclk_dsys.clk, .enable = s5pv210_clk_ip0_ctrl, @@ -573,6 +556,20 @@ static struct clk clk_hsmmc3 = { .ctrlbit = (1<<19), }; +static struct clk clk_pdma0 = { + .name = "pdma0", + .parent = &clk_hclk_psys.clk, + .enable = s5pv210_clk_ip0_ctrl, + .ctrlbit = (1 << 3), +}; + +static struct clk clk_pdma1 = { + .name = "pdma1", + .parent = &clk_hclk_psys.clk, + .enable = s5pv210_clk_ip0_ctrl, + .ctrlbit = (1 << 4), +}; + static struct clk *clkset_uart_list[] = { [6] = &clk_mout_mpll.clk, [7] = &clk_mout_epll.clk, @@ -1075,6 +1072,8 @@ static struct clk *clk_cdev[] = { &clk_hsmmc1, &clk_hsmmc2, &clk_hsmmc3, + &clk_pdma0, + &clk_pdma1, }; /* Clock initialisation code */ @@ -1333,6 +1332,8 @@ static struct clk_lookup s5pv210_clk_lookup[] = { CLKDEV_INIT(NULL, "spi_busclk0", &clk_p), CLKDEV_INIT("s5pv210-spi.0", "spi_busclk1", &clk_sclk_spi0.clk), CLKDEV_INIT("s5pv210-spi.1", "spi_busclk1", &clk_sclk_spi1.clk), + CLKDEV_INIT("dma-pl330.0", "apb_pclk", &clk_pdma0), + CLKDEV_INIT("dma-pl330.1", "apb_pclk", &clk_pdma1), }; void __init s5pv210_register_clocks(void) @@ -1361,6 +1362,5 @@ void __init s5pv210_register_clocks(void) for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++) s3c_disable_clocks(clk_cdev[ptr], 1); - s3c24xx_register_clock(&dummy_apb_pclk); s3c_pwmclk_init(); } diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index 3a38f7b34b94..e373de44a8b6 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -845,7 +845,7 @@ static struct fimc_source_info goni_camera_sensors[] = { .mux_id = 0, .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | V4L2_MBUS_VSYNC_ACTIVE_LOW, - .bus_type = FIMC_BUS_TYPE_ITU_601, + .fimc_bus_type = FIMC_BUS_TYPE_ITU_601, .board_info = &noon010pc30_board_info, .i2c_bus_num = 0, .clk_frequency = 16000000UL, diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index cdcb799e802f..fec49ebc359a 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -32,6 +32,7 @@ #include <linux/smsc911x.h> #include <linux/spi/spi.h> #include <linux/spi/sh_hspi.h> +#include <linux/mmc/host.h> #include <linux/mmc/sh_mobile_sdhi.h> #include <linux/mfd/tmio.h> #include <linux/usb/otg.h> diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c index f9d754f90c59..d2b3937c4014 100644 --- a/arch/arm/mach-spear3xx/spear3xx.c +++ b/arch/arm/mach-spear3xx/spear3xx.c @@ -14,7 +14,7 @@ #define pr_fmt(fmt) "SPEAr3xx: " fmt #include <linux/amba/pl022.h> -#include <linux/amba/pl08x.h> +#include <linux/amba/pl080.h> #include <linux/io.h> #include <plat/pl080.h> #include <mach/generic.h> diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index c7e3759f16d3..e9db6b4bf65a 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -342,6 +342,7 @@ static int __init atomic_pool_init(void) { struct dma_pool *pool = &atomic_pool; pgprot_t prot = pgprot_dmacoherent(pgprot_kernel); + gfp_t gfp = GFP_KERNEL | GFP_DMA; unsigned long nr_pages = pool->size >> PAGE_SHIFT; unsigned long *bitmap; struct page *page; @@ -361,8 +362,8 @@ static int __init atomic_pool_init(void) ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page, atomic_pool_init); else - ptr = __alloc_remap_buffer(NULL, pool->size, GFP_KERNEL, prot, - &page, atomic_pool_init); + ptr = __alloc_remap_buffer(NULL, pool->size, gfp, prot, &page, + atomic_pool_init); if (ptr) { int i; diff --git a/arch/arm/plat-orion/addr-map.c b/arch/arm/plat-orion/addr-map.c index febe3862873c..807ac8e5cbc0 100644 --- a/arch/arm/plat-orion/addr-map.c +++ b/arch/arm/plat-orion/addr-map.c @@ -157,9 +157,12 @@ void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg, u32 size = readl(ddr_window_cpu_base + DDR_SIZE_CS_OFF(i)); /* - * Chip select enabled? + * We only take care of entries for which the chip + * select is enabled, and that don't have high base + * address bits set (devices can only access the first + * 32 bits of the memory). */ - if (size & 1) { + if ((size & 1) && !(base & 0xF)) { struct mbus_dram_window *w; w = &orion_mbus_dram_info.cs[cs++]; diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig index 739d016eb273..8a08c31b5e20 100644 --- a/arch/arm/plat-spear/Kconfig +++ b/arch/arm/plat-spear/Kconfig @@ -10,7 +10,7 @@ choice config ARCH_SPEAR13XX bool "ST SPEAr13xx with Device Tree" - select ARCH_HAVE_CPUFREQ + select ARCH_HAS_CPUFREQ select ARM_GIC select CPU_V7 select GPIO_SPEAR_SPICS diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig index 9b89257b2cfd..c1a868d398bd 100644 --- a/arch/avr32/Kconfig +++ b/arch/avr32/Kconfig @@ -7,7 +7,7 @@ config AVR32 select HAVE_OPROFILE select HAVE_KPROBES select HAVE_GENERIC_HARDIRQS - select HAVE_VIRT_TO_BUS + select VIRT_TO_BUS select GENERIC_IRQ_PROBE select GENERIC_ATOMIC64 select HARDIRQS_SW_RESEND diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 600494c70e96..c3f2e0bc644a 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -33,7 +33,7 @@ config BLACKFIN select ARCH_HAVE_CUSTOM_GPIO_H select ARCH_WANT_OPTIONAL_GPIOLIB select HAVE_UID16 - select HAVE_VIRT_TO_BUS + select VIRT_TO_BUS select ARCH_WANT_IPC_PARSE_VERSION select HAVE_GENERIC_HARDIRQS select GENERIC_ATOMIC64 diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig index bb0ac66cf533..06dd026533e3 100644 --- a/arch/cris/Kconfig +++ b/arch/cris/Kconfig @@ -43,7 +43,7 @@ config CRIS select GENERIC_ATOMIC64 select HAVE_GENERIC_HARDIRQS select HAVE_UID16 - select HAVE_VIRT_TO_BUS + select VIRT_TO_BUS select ARCH_WANT_IPC_PARSE_VERSION select GENERIC_IRQ_SHOW select GENERIC_IOMAP diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig index 12369b194c7b..2ce731f9aa4d 100644 --- a/arch/frv/Kconfig +++ b/arch/frv/Kconfig @@ -6,7 +6,7 @@ config FRV select HAVE_PERF_EVENTS select HAVE_UID16 select HAVE_GENERIC_HARDIRQS - select HAVE_VIRT_TO_BUS + select VIRT_TO_BUS select GENERIC_IRQ_SHOW select HAVE_DEBUG_BUGVERBOSE select ARCH_HAVE_NMI_SAFE_CMPXCHG diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig index ae8551eb3736..79250de1b12a 100644 --- a/arch/h8300/Kconfig +++ b/arch/h8300/Kconfig @@ -5,7 +5,7 @@ config H8300 select HAVE_GENERIC_HARDIRQS select GENERIC_ATOMIC64 select HAVE_UID16 - select HAVE_VIRT_TO_BUS + select VIRT_TO_BUS select ARCH_WANT_IPC_PARSE_VERSION select GENERIC_IRQ_SHOW select GENERIC_CPU_DEVICES diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 33f3fdc0b214..9a02f71c6b1f 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -26,7 +26,7 @@ config IA64 select HAVE_MEMBLOCK select HAVE_MEMBLOCK_NODE_MAP select HAVE_VIRT_CPU_ACCOUNTING - select HAVE_VIRT_TO_BUS + select VIRT_TO_BUS select ARCH_DISCARD_MEMBLOCK select GENERIC_IRQ_PROBE select GENERIC_PENDING_IRQ if SMP diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig index 92623818a1fe..bcd17b206571 100644 --- a/arch/m32r/Kconfig +++ b/arch/m32r/Kconfig @@ -10,7 +10,7 @@ config M32R select ARCH_WANT_IPC_PARSE_VERSION select HAVE_DEBUG_BUGVERBOSE select HAVE_GENERIC_HARDIRQS - select HAVE_VIRT_TO_BUS + select VIRT_TO_BUS select GENERIC_IRQ_PROBE select GENERIC_IRQ_SHOW select GENERIC_ATOMIC64 diff --git a/arch/m32r/include/uapi/asm/stat.h b/arch/m32r/include/uapi/asm/stat.h index da4518f82d6d..98470fe483b6 100644 --- a/arch/m32r/include/uapi/asm/stat.h +++ b/arch/m32r/include/uapi/asm/stat.h @@ -63,10 +63,10 @@ struct stat64 { long long st_size; unsigned long st_blksize; -#if defined(__BIG_ENDIAN) +#if defined(__BYTE_ORDER) ? __BYTE_ORDER == __BIG_ENDIAN : defined(__BIG_ENDIAN) unsigned long __pad4; /* future possible st_blocks high bits */ unsigned long st_blocks; /* Number 512-byte blocks allocated. */ -#elif defined(__LITTLE_ENDIAN) +#elif defined(__BYTE_ORDER) ? __BYTE_ORDER == __LITTLE_ENDIAN : defined(__LITTLE_ENDIAN) unsigned long st_blocks; /* Number 512-byte blocks allocated. */ unsigned long __pad4; /* future possible st_blocks high bits */ #else diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 0e708c78e01c..6de813370b8c 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -8,7 +8,7 @@ config M68K select GENERIC_IRQ_SHOW select GENERIC_ATOMIC64 select HAVE_UID16 - select HAVE_VIRT_TO_BUS + select VIRT_TO_BUS select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS select GENERIC_CPU_DEVICES select GENERIC_STRNCPY_FROM_USER if MMU diff --git a/arch/m68k/Kconfig.machine b/arch/m68k/Kconfig.machine index 7cdf6b010381..7240584d3439 100644 --- a/arch/m68k/Kconfig.machine +++ b/arch/m68k/Kconfig.machine @@ -310,7 +310,6 @@ config COBRA5282 config SOM5282EM bool "EMAC.Inc SOM5282EM board support" depends on M528x - select EMAC_INC help Support for the EMAC.Inc SOM5282EM module. diff --git a/arch/m68k/include/asm/MC68328.h b/arch/m68k/include/asm/MC68328.h index a337e56d09bf..4ebf098b8a1f 100644 --- a/arch/m68k/include/asm/MC68328.h +++ b/arch/m68k/include/asm/MC68328.h @@ -293,7 +293,7 @@ /* * Here go the bitmasks themselves */ -#define IMR_MSPIM (1 << SPIM _IRQ_NUM) /* Mask SPI Master interrupt */ +#define IMR_MSPIM (1 << SPIM_IRQ_NUM) /* Mask SPI Master interrupt */ #define IMR_MTMR2 (1 << TMR2_IRQ_NUM) /* Mask Timer 2 interrupt */ #define IMR_MUART (1 << UART_IRQ_NUM) /* Mask UART interrupt */ #define IMR_MWDT (1 << WDT_IRQ_NUM) /* Mask Watchdog Timer interrupt */ @@ -327,7 +327,7 @@ #define IWR_ADDR 0xfffff308 #define IWR LONG_REF(IWR_ADDR) -#define IWR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */ +#define IWR_SPIM (1 << SPIM_IRQ_NUM) /* SPI Master interrupt */ #define IWR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */ #define IWR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ #define IWR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ @@ -357,7 +357,7 @@ #define ISR_ADDR 0xfffff30c #define ISR LONG_REF(ISR_ADDR) -#define ISR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */ +#define ISR_SPIM (1 << SPIM_IRQ_NUM) /* SPI Master interrupt */ #define ISR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */ #define ISR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ #define ISR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ @@ -391,7 +391,7 @@ #define IPR_ADDR 0xfffff310 #define IPR LONG_REF(IPR_ADDR) -#define IPR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */ +#define IPR_SPIM (1 << SPIM_IRQ_NUM) /* SPI Master interrupt */ #define IPR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */ #define IPR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ #define IPR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ @@ -757,7 +757,7 @@ /* 'EZ328-compatible definitions */ #define TCN_ADDR TCN1_ADDR -#define TCN TCN +#define TCN TCN1 /* * Timer Unit 1 and 2 Status Registers diff --git a/arch/m68k/kernel/setup_no.c b/arch/m68k/kernel/setup_no.c index 71fb29938dba..911ba472e6c4 100644 --- a/arch/m68k/kernel/setup_no.c +++ b/arch/m68k/kernel/setup_no.c @@ -57,6 +57,9 @@ void (*mach_reset)(void); void (*mach_halt)(void); void (*mach_power_off)(void); +#ifdef CONFIG_M68000 +#define CPU_NAME "MC68000" +#endif #ifdef CONFIG_M68328 #define CPU_NAME "MC68328" #endif diff --git a/arch/m68k/mm/init.c b/arch/m68k/mm/init.c index afd8106fd83b..519aad8fa812 100644 --- a/arch/m68k/mm/init.c +++ b/arch/m68k/mm/init.c @@ -188,7 +188,7 @@ void __init mem_init(void) } } -#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE) +#if defined(CONFIG_MMU) && !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE) /* insert pointer tables allocated so far into the tablelist */ init_pointer_table((unsigned long)kernel_pg_dir); for (i = 0; i < PTRS_PER_PGD; i++) { diff --git a/arch/m68k/platform/coldfire/m528x.c b/arch/m68k/platform/coldfire/m528x.c index 83b7dad7a84e..b03a9d271837 100644 --- a/arch/m68k/platform/coldfire/m528x.c +++ b/arch/m68k/platform/coldfire/m528x.c @@ -69,7 +69,7 @@ static void __init m528x_uarts_init(void) u8 port; /* make sure PUAPAR is set for UART0 and UART1 */ - port = readb(MCF5282_GPIO_PUAPAR); + port = readb(MCFGPIO_PUAPAR); port |= 0x03 | (0x03 << 2); writeb(port, MCFGPIO_PUAPAR); } diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index 7843d11156e6..1323fa2530eb 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -19,7 +19,7 @@ config MICROBLAZE select HAVE_DEBUG_KMEMLEAK select IRQ_DOMAIN select HAVE_GENERIC_HARDIRQS - select HAVE_VIRT_TO_BUS + select VIRT_TO_BUS select GENERIC_IRQ_PROBE select GENERIC_IRQ_SHOW select GENERIC_PCI_IOMAP diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index ae9c716c46bb..cd2e21ff562a 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -38,7 +38,7 @@ config MIPS select GENERIC_CLOCKEVENTS select GENERIC_CMOS_UPDATE select HAVE_MOD_ARCH_SPECIFIC - select HAVE_VIRT_TO_BUS + select VIRT_TO_BUS select MODULES_USE_ELF_REL if MODULES select MODULES_USE_ELF_RELA if MODULES && 64BIT select CLONE_BACKWARDS diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig index b06c7360b1c6..428da175d073 100644 --- a/arch/mn10300/Kconfig +++ b/arch/mn10300/Kconfig @@ -8,7 +8,7 @@ config MN10300 select HAVE_ARCH_KGDB select GENERIC_ATOMIC64 select HAVE_NMI_WATCHDOG if MN10300_WD_TIMER - select HAVE_VIRT_TO_BUS + select VIRT_TO_BUS select GENERIC_CLOCKEVENTS select MODULES_USE_ELF_RELA select OLD_SIGSUSPEND3 diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig index 014a6482ed4c..9ab3bf2eca8d 100644 --- a/arch/openrisc/Kconfig +++ b/arch/openrisc/Kconfig @@ -9,10 +9,9 @@ config OPENRISC select OF_EARLY_FLATTREE select IRQ_DOMAIN select HAVE_MEMBLOCK - select ARCH_WANT_OPTIONAL_GPIOLIB + select ARCH_REQUIRE_GPIOLIB select HAVE_ARCH_TRACEHOOK select HAVE_GENERIC_HARDIRQS - select HAVE_VIRT_TO_BUS select GENERIC_IRQ_CHIP select GENERIC_IRQ_PROBE select GENERIC_IRQ_SHOW diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index a9ff712a2864..0339181bf3ac 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -21,7 +21,7 @@ config PARISC select GENERIC_STRNCPY_FROM_USER select SYSCTL_ARCH_UNALIGN_ALLOW select HAVE_MOD_ARCH_SPECIFIC - select HAVE_VIRT_TO_BUS + select VIRT_TO_BUS select MODULES_USE_ELF_RELA select CLONE_BACKWARDS select TTY # Needed for pdc_cons.c diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index b89d7eb730a2..ea5bb045983a 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -90,6 +90,7 @@ config GENERIC_GPIO config PPC bool default y + select BINFMT_ELF select OF select OF_EARLY_FLATTREE select HAVE_FTRACE_MCOUNT_RECORD @@ -98,7 +99,7 @@ config PPC select HAVE_FUNCTION_GRAPH_TRACER select SYSCTL_EXCEPTION_TRACE select ARCH_WANT_OPTIONAL_GPIOLIB - select HAVE_VIRT_TO_BUS if !PPC64 + select VIRT_TO_BUS if !PPC64 select HAVE_IDE select HAVE_IOREMAP_PROT select HAVE_EFFICIENT_UNALIGNED_ACCESS diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h index 2fdb47a19efd..b59e06f507ea 100644 --- a/arch/powerpc/include/asm/mmu-hash64.h +++ b/arch/powerpc/include/asm/mmu-hash64.h @@ -343,17 +343,16 @@ extern void slb_set_size(u16 size); /* * VSID allocation (256MB segment) * - * We first generate a 38-bit "proto-VSID". For kernel addresses this - * is equal to the ESID | 1 << 37, for user addresses it is: - * (context << USER_ESID_BITS) | (esid & ((1U << USER_ESID_BITS) - 1) + * We first generate a 37-bit "proto-VSID". Proto-VSIDs are generated + * from mmu context id and effective segment id of the address. * - * This splits the proto-VSID into the below range - * 0 - (2^(CONTEXT_BITS + USER_ESID_BITS) - 1) : User proto-VSID range - * 2^(CONTEXT_BITS + USER_ESID_BITS) - 2^(VSID_BITS) : Kernel proto-VSID range - * - * We also have CONTEXT_BITS + USER_ESID_BITS = VSID_BITS - 1 - * That is, we assign half of the space to user processes and half - * to the kernel. + * For user processes max context id is limited to ((1ul << 19) - 5) + * for kernel space, we use the top 4 context ids to map address as below + * NOTE: each context only support 64TB now. + * 0x7fffc - [ 0xc000000000000000 - 0xc0003fffffffffff ] + * 0x7fffd - [ 0xd000000000000000 - 0xd0003fffffffffff ] + * 0x7fffe - [ 0xe000000000000000 - 0xe0003fffffffffff ] + * 0x7ffff - [ 0xf000000000000000 - 0xf0003fffffffffff ] * * The proto-VSIDs are then scrambled into real VSIDs with the * multiplicative hash: @@ -363,41 +362,49 @@ extern void slb_set_size(u16 size); * VSID_MULTIPLIER is prime, so in particular it is * co-prime to VSID_MODULUS, making this a 1:1 scrambling function. * Because the modulus is 2^n-1 we can compute it efficiently without - * a divide or extra multiply (see below). - * - * This scheme has several advantages over older methods: - * - * - We have VSIDs allocated for every kernel address - * (i.e. everything above 0xC000000000000000), except the very top - * segment, which simplifies several things. + * a divide or extra multiply (see below). The scramble function gives + * robust scattering in the hash table (at least based on some initial + * results). * - * - We allow for USER_ESID_BITS significant bits of ESID and - * CONTEXT_BITS bits of context for user addresses. - * i.e. 64T (46 bits) of address space for up to half a million contexts. + * We also consider VSID 0 special. We use VSID 0 for slb entries mapping + * bad address. This enables us to consolidate bad address handling in + * hash_page. * - * - The scramble function gives robust scattering in the hash - * table (at least based on some initial results). The previous - * method was more susceptible to pathological cases giving excessive - * hash collisions. + * We also need to avoid the last segment of the last context, because that + * would give a protovsid of 0x1fffffffff. That will result in a VSID 0 + * because of the modulo operation in vsid scramble. But the vmemmap + * (which is what uses region 0xf) will never be close to 64TB in size + * (it's 56 bytes per page of system memory). */ +#define CONTEXT_BITS 19 +#define ESID_BITS 18 +#define ESID_BITS_1T 6 + +/* + * 256MB segment + * The proto-VSID space has 2^(CONTEX_BITS + ESID_BITS) - 1 segments + * available for user + kernel mapping. The top 4 contexts are used for + * kernel mapping. Each segment contains 2^28 bytes. Each + * context maps 2^46 bytes (64TB) so we can support 2^19-1 contexts + * (19 == 37 + 28 - 46). + */ +#define MAX_USER_CONTEXT ((ASM_CONST(1) << CONTEXT_BITS) - 5) + /* * This should be computed such that protovosid * vsid_mulitplier * doesn't overflow 64 bits. It should also be co-prime to vsid_modulus */ #define VSID_MULTIPLIER_256M ASM_CONST(12538073) /* 24-bit prime */ -#define VSID_BITS_256M 38 +#define VSID_BITS_256M (CONTEXT_BITS + ESID_BITS) #define VSID_MODULUS_256M ((1UL<<VSID_BITS_256M)-1) #define VSID_MULTIPLIER_1T ASM_CONST(12538073) /* 24-bit prime */ -#define VSID_BITS_1T 26 +#define VSID_BITS_1T (CONTEXT_BITS + ESID_BITS_1T) #define VSID_MODULUS_1T ((1UL<<VSID_BITS_1T)-1) -#define CONTEXT_BITS 19 -#define USER_ESID_BITS 18 -#define USER_ESID_BITS_1T 6 -#define USER_VSID_RANGE (1UL << (USER_ESID_BITS + SID_SHIFT)) +#define USER_VSID_RANGE (1UL << (ESID_BITS + SID_SHIFT)) /* * This macro generates asm code to compute the VSID scramble @@ -421,7 +428,8 @@ extern void slb_set_size(u16 size); srdi rx,rt,VSID_BITS_##size; \ clrldi rt,rt,(64-VSID_BITS_##size); \ add rt,rt,rx; /* add high and low bits */ \ - /* Now, r3 == VSID (mod 2^36-1), and lies between 0 and \ + /* NOTE: explanation based on VSID_BITS_##size = 36 \ + * Now, r3 == VSID (mod 2^36-1), and lies between 0 and \ * 2^36-1+2^28-1. That in particular means that if r3 >= \ * 2^36-1, then r3+1 has the 2^36 bit set. So, if r3+1 has \ * the bit clear, r3 already has the answer we want, if it \ @@ -513,34 +521,6 @@ typedef struct { }) #endif /* 1 */ -/* - * This is only valid for addresses >= PAGE_OFFSET - * The proto-VSID space is divided into two class - * User: 0 to 2^(CONTEXT_BITS + USER_ESID_BITS) -1 - * kernel: 2^(CONTEXT_BITS + USER_ESID_BITS) to 2^(VSID_BITS) - 1 - * - * With KERNEL_START at 0xc000000000000000, the proto vsid for - * the kernel ends up with 0xc00000000 (36 bits). With 64TB - * support we need to have kernel proto-VSID in the - * [2^37 to 2^38 - 1] range due to the increased USER_ESID_BITS. - */ -static inline unsigned long get_kernel_vsid(unsigned long ea, int ssize) -{ - unsigned long proto_vsid; - /* - * We need to make sure proto_vsid for the kernel is - * >= 2^(CONTEXT_BITS + USER_ESID_BITS[_1T]) - */ - if (ssize == MMU_SEGSIZE_256M) { - proto_vsid = ea >> SID_SHIFT; - proto_vsid |= (1UL << (CONTEXT_BITS + USER_ESID_BITS)); - return vsid_scramble(proto_vsid, 256M); - } - proto_vsid = ea >> SID_SHIFT_1T; - proto_vsid |= (1UL << (CONTEXT_BITS + USER_ESID_BITS_1T)); - return vsid_scramble(proto_vsid, 1T); -} - /* Returns the segment size indicator for a user address */ static inline int user_segment_size(unsigned long addr) { @@ -550,17 +530,41 @@ static inline int user_segment_size(unsigned long addr) return MMU_SEGSIZE_256M; } -/* This is only valid for user addresses (which are below 2^44) */ static inline unsigned long get_vsid(unsigned long context, unsigned long ea, int ssize) { + /* + * Bad address. We return VSID 0 for that + */ + if ((ea & ~REGION_MASK) >= PGTABLE_RANGE) + return 0; + if (ssize == MMU_SEGSIZE_256M) - return vsid_scramble((context << USER_ESID_BITS) + return vsid_scramble((context << ESID_BITS) | (ea >> SID_SHIFT), 256M); - return vsid_scramble((context << USER_ESID_BITS_1T) + return vsid_scramble((context << ESID_BITS_1T) | (ea >> SID_SHIFT_1T), 1T); } +/* + * This is only valid for addresses >= PAGE_OFFSET + * + * For kernel space, we use the top 4 context ids to map address as below + * 0x7fffc - [ 0xc000000000000000 - 0xc0003fffffffffff ] + * 0x7fffd - [ 0xd000000000000000 - 0xd0003fffffffffff ] + * 0x7fffe - [ 0xe000000000000000 - 0xe0003fffffffffff ] + * 0x7ffff - [ 0xf000000000000000 - 0xf0003fffffffffff ] + */ +static inline unsigned long get_kernel_vsid(unsigned long ea, int ssize) +{ + unsigned long context; + + /* + * kernel take the top 4 context from the available range + */ + context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1; + return get_vsid(context, ea, ssize); +} #endif /* __ASSEMBLY__ */ #endif /* _ASM_POWERPC_MMU_HASH64_H_ */ diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 75a3d71b895d..19599ef352bc 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -275,7 +275,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_features = CPU_FTRS_PPC970, .cpu_user_features = COMMON_USER_POWER4 | PPC_FEATURE_HAS_ALTIVEC_COMP, - .mmu_features = MMU_FTR_HPTE_TABLE, + .mmu_features = MMU_FTRS_PPC970, .icache_bsize = 128, .dcache_bsize = 128, .num_pmcs = 8, diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index 87ef8f5ee5bc..200afa5bcfb7 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -1452,20 +1452,36 @@ do_ste_alloc: _GLOBAL(do_stab_bolted) stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */ std r11,PACA_EXSLB+EX_SRR0(r13) /* save SRR0 in exc. frame */ + mfspr r11,SPRN_DAR /* ea */ + /* + * check for bad kernel/user address + * (ea & ~REGION_MASK) >= PGTABLE_RANGE + */ + rldicr. r9,r11,4,(63 - 46 - 4) + li r9,0 /* VSID = 0 for bad address */ + bne- 0f + + /* + * Calculate VSID: + * This is the kernel vsid, we take the top for context from + * the range. context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1 + * Here we know that (ea >> 60) == 0xc + */ + lis r9,(MAX_USER_CONTEXT + 1)@ha + addi r9,r9,(MAX_USER_CONTEXT + 1)@l + + srdi r10,r11,SID_SHIFT + rldimi r10,r9,ESID_BITS,0 /* proto vsid */ + ASM_VSID_SCRAMBLE(r10, r9, 256M) + rldic r9,r10,12,16 /* r9 = vsid << 12 */ + +0: /* Hash to the primary group */ ld r10,PACASTABVIRT(r13) - mfspr r11,SPRN_DAR - srdi r11,r11,28 + srdi r11,r11,SID_SHIFT rldimi r10,r11,7,52 /* r10 = first ste of the group */ - /* Calculate VSID */ - /* This is a kernel address, so protovsid = ESID | 1 << 37 */ - li r9,0x1 - rldimi r11,r9,(CONTEXT_BITS + USER_ESID_BITS),0 - ASM_VSID_SCRAMBLE(r11, r9, 256M) - rldic r9,r11,12,16 /* r9 = vsid << 12 */ - /* Search the primary group for a free entry */ 1: ld r11,0(r10) /* Test valid bit of the current ste */ andi. r11,r11,0x80 diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 7f7fb7fd991b..13f8d168b3f1 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -2832,11 +2832,13 @@ static void unreloc_toc(void) { } #else -static void __reloc_toc(void *tocstart, unsigned long offset, - unsigned long nr_entries) +static void __reloc_toc(unsigned long offset, unsigned long nr_entries) { unsigned long i; - unsigned long *toc_entry = (unsigned long *)tocstart; + unsigned long *toc_entry; + + /* Get the start of the TOC by using r2 directly. */ + asm volatile("addi %0,2,-0x8000" : "=b" (toc_entry)); for (i = 0; i < nr_entries; i++) { *toc_entry = *toc_entry + offset; @@ -2850,8 +2852,7 @@ static void reloc_toc(void) unsigned long nr_entries = (__prom_init_toc_end - __prom_init_toc_start) / sizeof(long); - /* Need to add offset to get at __prom_init_toc_start */ - __reloc_toc(__prom_init_toc_start + offset, offset, nr_entries); + __reloc_toc(offset, nr_entries); mb(); } @@ -2864,8 +2865,7 @@ static void unreloc_toc(void) mb(); - /* __prom_init_toc_start has been relocated, no need to add offset */ - __reloc_toc(__prom_init_toc_start, -offset, nr_entries); + __reloc_toc(-offset, nr_entries); } #endif #endif diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index 245c1b6a0858..f9b30c68ba47 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -1428,6 +1428,7 @@ static long ppc_set_hwdebug(struct task_struct *child, brk.address = bp_info->addr & ~7UL; brk.type = HW_BRK_TYPE_TRANSLATE; + brk.len = 8; if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ) brk.type |= HW_BRK_TYPE_READ; if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE) diff --git a/arch/powerpc/kvm/book3s_64_mmu_host.c b/arch/powerpc/kvm/book3s_64_mmu_host.c index ead58e317294..5d7d29a313eb 100644 --- a/arch/powerpc/kvm/book3s_64_mmu_host.c +++ b/arch/powerpc/kvm/book3s_64_mmu_host.c @@ -326,8 +326,8 @@ int kvmppc_mmu_init(struct kvm_vcpu *vcpu) vcpu3s->context_id[0] = err; vcpu3s->proto_vsid_max = ((vcpu3s->context_id[0] + 1) - << USER_ESID_BITS) - 1; - vcpu3s->proto_vsid_first = vcpu3s->context_id[0] << USER_ESID_BITS; + << ESID_BITS) - 1; + vcpu3s->proto_vsid_first = vcpu3s->context_id[0] << ESID_BITS; vcpu3s->proto_vsid_next = vcpu3s->proto_vsid_first; kvmppc_mmu_hpte_init(vcpu); diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 1b6e1271719f..f410c3e12c1e 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -195,6 +195,11 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend, unsigned long vpn = hpt_vpn(vaddr, vsid, ssize); unsigned long tprot = prot; + /* + * If we hit a bad address return error. + */ + if (!vsid) + return -1; /* Make kernel text executable */ if (overlaps_kernel_text(vaddr, vaddr + step)) tprot &= ~HPTE_R_N; @@ -759,6 +764,8 @@ void __init early_init_mmu(void) /* Initialize stab / SLB management */ if (mmu_has_feature(MMU_FTR_SLB)) slb_initialize(); + else + stab_initialize(get_paca()->stab_real); } #ifdef CONFIG_SMP @@ -922,11 +929,6 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap) DBG_LOW("hash_page(ea=%016lx, access=%lx, trap=%lx\n", ea, access, trap); - if ((ea & ~REGION_MASK) >= PGTABLE_RANGE) { - DBG_LOW(" out of pgtable range !\n"); - return 1; - } - /* Get region & vsid */ switch (REGION_ID(ea)) { case USER_REGION_ID: @@ -957,6 +959,11 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap) } DBG_LOW(" mm=%p, mm->pgdir=%p, vsid=%016lx\n", mm, mm->pgd, vsid); + /* Bad address. */ + if (!vsid) { + DBG_LOW("Bad address!\n"); + return 1; + } /* Get pgdir */ pgdir = mm->pgd; if (pgdir == NULL) @@ -1126,6 +1133,8 @@ void hash_preload(struct mm_struct *mm, unsigned long ea, /* Get VSID */ ssize = user_segment_size(ea); vsid = get_vsid(mm->context.id, ea, ssize); + if (!vsid) + return; /* Hash doesn't like irqs */ local_irq_save(flags); @@ -1233,6 +1242,9 @@ static void kernel_map_linear_page(unsigned long vaddr, unsigned long lmi) hash = hpt_hash(vpn, PAGE_SHIFT, mmu_kernel_ssize); hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP); + /* Don't create HPTE entries for bad address */ + if (!vsid) + return; ret = ppc_md.hpte_insert(hpteg, vpn, __pa(vaddr), mode, HPTE_V_BOLTED, mmu_linear_psize, mmu_kernel_ssize); diff --git a/arch/powerpc/mm/mmu_context_hash64.c b/arch/powerpc/mm/mmu_context_hash64.c index 40bc5b0ace54..d1d1b92c5b99 100644 --- a/arch/powerpc/mm/mmu_context_hash64.c +++ b/arch/powerpc/mm/mmu_context_hash64.c @@ -29,15 +29,6 @@ static DEFINE_SPINLOCK(mmu_context_lock); static DEFINE_IDA(mmu_context_ida); -/* - * 256MB segment - * The proto-VSID space has 2^(CONTEX_BITS + USER_ESID_BITS) - 1 segments - * available for user mappings. Each segment contains 2^28 bytes. Each - * context maps 2^46 bytes (64TB) so we can support 2^19-1 contexts - * (19 == 37 + 28 - 46). - */ -#define MAX_CONTEXT ((1UL << CONTEXT_BITS) - 1) - int __init_new_context(void) { int index; @@ -56,7 +47,7 @@ again: else if (err) return err; - if (index > MAX_CONTEXT) { + if (index > MAX_USER_CONTEXT) { spin_lock(&mmu_context_lock); ida_remove(&mmu_context_ida, index); spin_unlock(&mmu_context_lock); diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c index e212a271c7a4..654258f165ae 100644 --- a/arch/powerpc/mm/pgtable_64.c +++ b/arch/powerpc/mm/pgtable_64.c @@ -61,7 +61,7 @@ #endif #ifdef CONFIG_PPC_STD_MMU_64 -#if TASK_SIZE_USER64 > (1UL << (USER_ESID_BITS + SID_SHIFT)) +#if TASK_SIZE_USER64 > (1UL << (ESID_BITS + SID_SHIFT)) #error TASK_SIZE_USER64 exceeds user VSID range #endif #endif diff --git a/arch/powerpc/mm/slb_low.S b/arch/powerpc/mm/slb_low.S index 1a16ca227757..17aa6dfceb34 100644 --- a/arch/powerpc/mm/slb_low.S +++ b/arch/powerpc/mm/slb_low.S @@ -31,10 +31,15 @@ * No other registers are examined or changed. */ _GLOBAL(slb_allocate_realmode) - /* r3 = faulting address */ + /* + * check for bad kernel/user address + * (ea & ~REGION_MASK) >= PGTABLE_RANGE + */ + rldicr. r9,r3,4,(63 - 46 - 4) + bne- 8f srdi r9,r3,60 /* get region */ - srdi r10,r3,28 /* get esid */ + srdi r10,r3,SID_SHIFT /* get esid */ cmpldi cr7,r9,0xc /* cmp PAGE_OFFSET for later use */ /* r3 = address, r10 = esid, cr7 = <> PAGE_OFFSET */ @@ -56,12 +61,14 @@ _GLOBAL(slb_allocate_realmode) */ _GLOBAL(slb_miss_kernel_load_linear) li r11,0 - li r9,0x1 /* - * for 1T we shift 12 bits more. slb_finish_load_1T will do - * the necessary adjustment + * context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1 + * r9 = region id. */ - rldimi r10,r9,(CONTEXT_BITS + USER_ESID_BITS),0 + addis r9,r9,(MAX_USER_CONTEXT - 0xc + 1)@ha + addi r9,r9,(MAX_USER_CONTEXT - 0xc + 1)@l + + BEGIN_FTR_SECTION b slb_finish_load END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT) @@ -91,24 +98,19 @@ _GLOBAL(slb_miss_kernel_load_vmemmap) _GLOBAL(slb_miss_kernel_load_io) li r11,0 6: - li r9,0x1 /* - * for 1T we shift 12 bits more. slb_finish_load_1T will do - * the necessary adjustment + * context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1 + * r9 = region id. */ - rldimi r10,r9,(CONTEXT_BITS + USER_ESID_BITS),0 + addis r9,r9,(MAX_USER_CONTEXT - 0xc + 1)@ha + addi r9,r9,(MAX_USER_CONTEXT - 0xc + 1)@l + BEGIN_FTR_SECTION b slb_finish_load END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT) b slb_finish_load_1T -0: /* user address: proto-VSID = context << 15 | ESID. First check - * if the address is within the boundaries of the user region - */ - srdi. r9,r10,USER_ESID_BITS - bne- 8f /* invalid ea bits set */ - - +0: /* when using slices, we extract the psize off the slice bitmaps * and then we need to get the sllp encoding off the mmu_psize_defs * array. @@ -164,15 +166,13 @@ END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT) ld r9,PACACONTEXTID(r13) BEGIN_FTR_SECTION cmpldi r10,0x1000 -END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT) - rldimi r10,r9,USER_ESID_BITS,0 -BEGIN_FTR_SECTION bge slb_finish_load_1T END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT) b slb_finish_load 8: /* invalid EA */ li r10,0 /* BAD_VSID */ + li r9,0 /* BAD_VSID */ li r11,SLB_VSID_USER /* flags don't much matter */ b slb_finish_load @@ -221,8 +221,6 @@ _GLOBAL(slb_allocate_user) /* get context to calculate proto-VSID */ ld r9,PACACONTEXTID(r13) - rldimi r10,r9,USER_ESID_BITS,0 - /* fall through slb_finish_load */ #endif /* __DISABLED__ */ @@ -231,9 +229,10 @@ _GLOBAL(slb_allocate_user) /* * Finish loading of an SLB entry and return * - * r3 = EA, r10 = proto-VSID, r11 = flags, clobbers r9, cr7 = <> PAGE_OFFSET + * r3 = EA, r9 = context, r10 = ESID, r11 = flags, clobbers r9, cr7 = <> PAGE_OFFSET */ slb_finish_load: + rldimi r10,r9,ESID_BITS,0 ASM_VSID_SCRAMBLE(r10,r9,256M) /* * bits above VSID_BITS_256M need to be ignored from r10 @@ -298,10 +297,11 @@ _GLOBAL(slb_compare_rr_to_size) /* * Finish loading of a 1T SLB entry (for the kernel linear mapping) and return. * - * r3 = EA, r10 = proto-VSID, r11 = flags, clobbers r9 + * r3 = EA, r9 = context, r10 = ESID(256MB), r11 = flags, clobbers r9 */ slb_finish_load_1T: - srdi r10,r10,40-28 /* get 1T ESID */ + srdi r10,r10,(SID_SHIFT_1T - SID_SHIFT) /* get 1T ESID */ + rldimi r10,r9,ESID_BITS_1T,0 ASM_VSID_SCRAMBLE(r10,r9,1T) /* * bits above VSID_BITS_1T need to be ignored from r10 diff --git a/arch/powerpc/mm/tlb_hash64.c b/arch/powerpc/mm/tlb_hash64.c index 0d82ef50dc3f..023ec8a13f38 100644 --- a/arch/powerpc/mm/tlb_hash64.c +++ b/arch/powerpc/mm/tlb_hash64.c @@ -82,11 +82,11 @@ void hpte_need_flush(struct mm_struct *mm, unsigned long addr, if (!is_kernel_addr(addr)) { ssize = user_segment_size(addr); vsid = get_vsid(mm->context.id, addr, ssize); - WARN_ON(vsid == 0); } else { vsid = get_kernel_vsid(addr, mmu_kernel_ssize); ssize = mmu_kernel_ssize; } + WARN_ON(vsid == 0); vpn = hpt_vpn(addr, vsid, ssize); rpte = __real_pte(__pte(pte), ptep); diff --git a/arch/powerpc/platforms/85xx/sgy_cts1000.c b/arch/powerpc/platforms/85xx/sgy_cts1000.c index 611e92f291c4..7179726ba5c5 100644 --- a/arch/powerpc/platforms/85xx/sgy_cts1000.c +++ b/arch/powerpc/platforms/85xx/sgy_cts1000.c @@ -69,7 +69,7 @@ static irqreturn_t gpio_halt_irq(int irq, void *__data) return IRQ_HANDLED; }; -static int __devinit gpio_halt_probe(struct platform_device *pdev) +static int gpio_halt_probe(struct platform_device *pdev) { enum of_gpio_flags flags; struct device_node *node = pdev->dev.of_node; @@ -128,7 +128,7 @@ static int __devinit gpio_halt_probe(struct platform_device *pdev) return 0; } -static int __devexit gpio_halt_remove(struct platform_device *pdev) +static int gpio_halt_remove(struct platform_device *pdev) { if (halt_node) { int gpio = of_get_gpio(halt_node, 0); @@ -165,7 +165,7 @@ static struct platform_driver gpio_halt_driver = { .of_match_table = gpio_halt_match, }, .probe = gpio_halt_probe, - .remove = __devexit_p(gpio_halt_remove), + .remove = gpio_halt_remove, }; module_platform_driver(gpio_halt_driver); diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index cea2f09c4241..18e3b76c78d7 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -124,9 +124,8 @@ config 6xx select PPC_HAVE_PMU_SUPPORT config POWER3 - bool depends on PPC64 && PPC_BOOK3S - default y if !POWER4_ONLY + def_bool y config POWER4 depends on PPC64 && PPC_BOOK3S @@ -145,8 +144,7 @@ config TUNE_CELL but somewhat slower on other machines. This option only changes the scheduling of instructions, not the selection of instructions itself, so the resulting kernel will keep running on all other - machines. When building a kernel that is supposed to run only - on Cell, you should also select the POWER4_ONLY option. + machines. # this is temp to handle compat with arch=ppc config 8xx diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 4b505370a1d5..eb8fb629f00b 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -134,7 +134,7 @@ config S390 select HAVE_SYSCALL_WRAPPERS select HAVE_UID16 if 32BIT select HAVE_VIRT_CPU_ACCOUNTING - select HAVE_VIRT_TO_BUS + select VIRT_TO_BUS select INIT_ALL_POSSIBLE select KTIME_SCALAR if 32BIT select MODULES_USE_ELF_RELA diff --git a/arch/s390/include/asm/eadm.h b/arch/s390/include/asm/eadm.h index 8d4847191ecc..dc9200ca32ed 100644 --- a/arch/s390/include/asm/eadm.h +++ b/arch/s390/include/asm/eadm.h @@ -34,6 +34,8 @@ struct arsb { u32 reserved[4]; } __packed; +#define EQC_WR_PROHIBIT 22 + struct msb { u8 fmt:4; u8 oc:4; @@ -96,11 +98,13 @@ struct scm_device { #define OP_STATE_TEMP_ERR 2 #define OP_STATE_PERM_ERR 3 +enum scm_event {SCM_CHANGE, SCM_AVAIL}; + struct scm_driver { struct device_driver drv; int (*probe) (struct scm_device *scmdev); int (*remove) (struct scm_device *scmdev); - void (*notify) (struct scm_device *scmdev); + void (*notify) (struct scm_device *scmdev, enum scm_event event); void (*handler) (struct scm_device *scmdev, void *data, int error); }; diff --git a/arch/s390/include/asm/tlbflush.h b/arch/s390/include/asm/tlbflush.h index 1d8fe2b17ef6..6b32af30878c 100644 --- a/arch/s390/include/asm/tlbflush.h +++ b/arch/s390/include/asm/tlbflush.h @@ -74,8 +74,6 @@ static inline void __tlb_flush_idte(unsigned long asce) static inline void __tlb_flush_mm(struct mm_struct * mm) { - if (unlikely(cpumask_empty(mm_cpumask(mm)))) - return; /* * If the machine has IDTE we prefer to do a per mm flush * on all cpus instead of doing a local flush if the mm diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index 550228523267..94feff7d6132 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -636,7 +636,8 @@ ENTRY(mcck_int_handler) UPDATE_VTIME %r14,%r15,__LC_MCCK_ENTER_TIMER mcck_skip: SWITCH_ASYNC __LC_GPREGS_SAVE_AREA+32,__LC_PANIC_STACK,PAGE_SHIFT - mvc __PT_R0(64,%r11),__LC_GPREGS_SAVE_AREA + stm %r0,%r7,__PT_R0(%r11) + mvc __PT_R8(32,%r11),__LC_GPREGS_SAVE_AREA+32 stm %r8,%r9,__PT_PSW(%r11) xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) l %r1,BASED(.Ldo_machine_check) diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S index 9c837c101297..2e6d60c55f90 100644 --- a/arch/s390/kernel/entry64.S +++ b/arch/s390/kernel/entry64.S @@ -678,8 +678,9 @@ ENTRY(mcck_int_handler) UPDATE_VTIME %r14,__LC_MCCK_ENTER_TIMER LAST_BREAK %r14 mcck_skip: - lghi %r14,__LC_GPREGS_SAVE_AREA - mvc __PT_R0(128,%r11),0(%r14) + lghi %r14,__LC_GPREGS_SAVE_AREA+64 + stmg %r0,%r7,__PT_R0(%r11) + mvc __PT_R8(64,%r11),0(%r14) stmg %r8,%r9,__PT_PSW(%r11) xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15) lgr %r2,%r11 # pass pointer to pt_regs diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index a5360de85ec7..29268859d8ee 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -571,6 +571,8 @@ static void __init setup_memory_end(void) /* Split remaining virtual space between 1:1 mapping & vmemmap array */ tmp = VMALLOC_START / (PAGE_SIZE + sizeof(struct page)); + /* vmemmap contains a multiple of PAGES_PER_SECTION struct pages */ + tmp = SECTION_ALIGN_UP(tmp); tmp = VMALLOC_START - tmp * sizeof(struct page); tmp &= ~((vmax >> 11) - 1); /* align to page table level */ tmp = min(tmp, 1UL << MAX_PHYSMEM_BITS); diff --git a/arch/score/Kconfig b/arch/score/Kconfig index e569aa1fd2ba..c8def8bc9020 100644 --- a/arch/score/Kconfig +++ b/arch/score/Kconfig @@ -12,7 +12,7 @@ config SCORE select GENERIC_CPU_DEVICES select GENERIC_CLOCKEVENTS select HAVE_MOD_ARCH_SPECIFIC - select HAVE_VIRT_TO_BUS + select VIRT_TO_BUS select MODULES_USE_ELF_REL select CLONE_BACKWARDS diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig index ff496ab1e794..25877aebc685 100644 --- a/arch/tile/Kconfig +++ b/arch/tile/Kconfig @@ -17,7 +17,7 @@ config TILE select GENERIC_IRQ_SHOW select HAVE_DEBUG_BUGVERBOSE select HAVE_SYSCALL_WRAPPERS if TILEGX - select HAVE_VIRT_TO_BUS + select VIRT_TO_BUS select SYS_HYPERVISOR select ARCH_HAVE_NMI_SAFE_CMPXCHG select GENERIC_CLOCKEVENTS diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig index dc50b157fc83..2943e3acdf0c 100644 --- a/arch/unicore32/Kconfig +++ b/arch/unicore32/Kconfig @@ -9,7 +9,7 @@ config UNICORE32 select GENERIC_ATOMIC64 select HAVE_KERNEL_LZO select HAVE_KERNEL_LZMA - select HAVE_VIRT_TO_BUS + select VIRT_TO_BUS select ARCH_HAVE_CUSTOM_GPIO_H select GENERIC_FIND_FIRST_BIT select GENERIC_IRQ_PROBE diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index a4f24f5b1218..70c0f3da0476 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -112,7 +112,7 @@ config X86 select GENERIC_STRNLEN_USER select HAVE_CONTEXT_TRACKING if X86_64 select HAVE_IRQ_TIME_ACCOUNTING - select HAVE_VIRT_TO_BUS + select VIRT_TO_BUS select MODULES_USE_ELF_REL if X86_32 select MODULES_USE_ELF_RELA if X86_64 select CLONE_BACKWARDS if X86_32 diff --git a/arch/x86/kernel/cpu/perf_event_intel_ds.c b/arch/x86/kernel/cpu/perf_event_intel_ds.c index 826054a4f2ee..b05a575d56f4 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_ds.c +++ b/arch/x86/kernel/cpu/perf_event_intel_ds.c @@ -729,3 +729,13 @@ void intel_ds_init(void) } } } + +void perf_restore_debug_store(void) +{ + struct debug_store *ds = __this_cpu_read(cpu_hw_events.ds); + + if (!x86_pmu.bts && !x86_pmu.pebs) + return; + + wrmsrl(MSR_IA32_DS_AREA, (unsigned long)ds); +} diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c index 120cee1c3f8d..3c68768d7a75 100644 --- a/arch/x86/power/cpu.c +++ b/arch/x86/power/cpu.c @@ -11,6 +11,7 @@ #include <linux/suspend.h> #include <linux/export.h> #include <linux/smp.h> +#include <linux/perf_event.h> #include <asm/pgtable.h> #include <asm/proto.h> @@ -228,6 +229,7 @@ static void __restore_processor_state(struct saved_context *ctxt) do_fpu_end(); x86_platform.restore_sched_clock_state(); mtrr_bp_restore(); + perf_restore_debug_store(); } /* Needed by apm.c */ diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index 35876ffac11d..b09de49dbec5 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -9,7 +9,7 @@ config XTENSA select HAVE_IDE select GENERIC_ATOMIC64 select HAVE_GENERIC_HARDIRQS - select HAVE_VIRT_TO_BUS + select VIRT_TO_BUS select GENERIC_IRQ_SHOW select GENERIC_CPU_DEVICES select MODULES_USE_ELF_RELA |