diff options
Diffstat (limited to 'drivers/acpi/tables/tbfadt.c')
| -rw-r--r-- | drivers/acpi/tables/tbfadt.c | 610 |
1 files changed, 0 insertions, 610 deletions
diff --git a/drivers/acpi/tables/tbfadt.c b/drivers/acpi/tables/tbfadt.c deleted file mode 100644 index 87f22e68c6d6..000000000000 --- a/drivers/acpi/tables/tbfadt.c +++ /dev/null @@ -1,610 +0,0 @@ -/****************************************************************************** - * - * Module Name: tbfadt - FADT table utilities - * - *****************************************************************************/ - -/* - * Copyright (C) 2000 - 2008, Intel Corp. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * substantially similar to the "NO WARRANTY" disclaimer below - * ("Disclaimer") and any redistribution must be conditioned upon - * including a substantially similar Disclaimer requirement for further - * binary redistribution. - * 3. Neither the names of the above-listed copyright holders nor the names - * of any contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * NO WARRANTY - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGES. - */ - -#include <acpi/acpi.h> -#include <acpi/accommon.h> -#include <acpi/actables.h> - -#define _COMPONENT ACPI_TABLES -ACPI_MODULE_NAME("tbfadt") - -/* Local prototypes */ -static inline void -acpi_tb_init_generic_address(struct acpi_generic_address *generic_address, - u8 space_id, u8 byte_width, u64 address); - -static void acpi_tb_convert_fadt(void); - -static void acpi_tb_validate_fadt(void); - -/* Table for conversion of FADT to common internal format and FADT validation */ - -typedef struct acpi_fadt_info { - char *name; - u8 address64; - u8 address32; - u8 length; - u8 default_length; - u8 type; - -} acpi_fadt_info; - -#define ACPI_FADT_REQUIRED 1 -#define ACPI_FADT_SEPARATE_LENGTH 2 - -static struct acpi_fadt_info fadt_info_table[] = { - {"Pm1aEventBlock", - ACPI_FADT_OFFSET(xpm1a_event_block), - ACPI_FADT_OFFSET(pm1a_event_block), - ACPI_FADT_OFFSET(pm1_event_length), - ACPI_PM1_REGISTER_WIDTH * 2, /* Enable + Status register */ - ACPI_FADT_REQUIRED}, - - {"Pm1bEventBlock", - ACPI_FADT_OFFSET(xpm1b_event_block), - ACPI_FADT_OFFSET(pm1b_event_block), - ACPI_FADT_OFFSET(pm1_event_length), - ACPI_PM1_REGISTER_WIDTH * 2, /* Enable + Status register */ - 0}, - - {"Pm1aControlBlock", - ACPI_FADT_OFFSET(xpm1a_control_block), - ACPI_FADT_OFFSET(pm1a_control_block), - ACPI_FADT_OFFSET(pm1_control_length), - ACPI_PM1_REGISTER_WIDTH, - ACPI_FADT_REQUIRED}, - - {"Pm1bControlBlock", - ACPI_FADT_OFFSET(xpm1b_control_block), - ACPI_FADT_OFFSET(pm1b_control_block), - ACPI_FADT_OFFSET(pm1_control_length), - ACPI_PM1_REGISTER_WIDTH, - 0}, - - {"Pm2ControlBlock", - ACPI_FADT_OFFSET(xpm2_control_block), - ACPI_FADT_OFFSET(pm2_control_block), - ACPI_FADT_OFFSET(pm2_control_length), - ACPI_PM2_REGISTER_WIDTH, - ACPI_FADT_SEPARATE_LENGTH}, - - {"PmTimerBlock", - ACPI_FADT_OFFSET(xpm_timer_block), - ACPI_FADT_OFFSET(pm_timer_block), - ACPI_FADT_OFFSET(pm_timer_length), - ACPI_PM_TIMER_WIDTH, - ACPI_FADT_REQUIRED}, - - {"Gpe0Block", - ACPI_FADT_OFFSET(xgpe0_block), - ACPI_FADT_OFFSET(gpe0_block), - ACPI_FADT_OFFSET(gpe0_block_length), - 0, - ACPI_FADT_SEPARATE_LENGTH}, - - {"Gpe1Block", - ACPI_FADT_OFFSET(xgpe1_block), - ACPI_FADT_OFFSET(gpe1_block), - ACPI_FADT_OFFSET(gpe1_block_length), - 0, - ACPI_FADT_SEPARATE_LENGTH} -}; - -#define ACPI_FADT_INFO_ENTRIES (sizeof (fadt_info_table) / sizeof (struct acpi_fadt_info)) - -/******************************************************************************* - * - * FUNCTION: acpi_tb_init_generic_address - * - * PARAMETERS: generic_address - GAS struct to be initialized - * byte_width - Width of this register - * Address - Address of the register - * - * RETURN: None - * - * DESCRIPTION: Initialize a Generic Address Structure (GAS) - * See the ACPI specification for a full description and - * definition of this structure. - * - ******************************************************************************/ - -static inline void -acpi_tb_init_generic_address(struct acpi_generic_address *generic_address, - u8 space_id, u8 byte_width, u64 address) -{ - - /* - * The 64-bit Address field is non-aligned in the byte packed - * GAS struct. - */ - ACPI_MOVE_64_TO_64(&generic_address->address, &address); - - /* All other fields are byte-wide */ - - generic_address->space_id = space_id; - generic_address->bit_width = (u8)ACPI_MUL_8(byte_width); - generic_address->bit_offset = 0; - generic_address->access_width = 0; /* Access width ANY */ -} - -/******************************************************************************* - * - * FUNCTION: acpi_tb_parse_fadt - * - * PARAMETERS: table_index - Index for the FADT - * Flags - Flags - * - * RETURN: None - * - * DESCRIPTION: Initialize the FADT, DSDT and FACS tables - * (FADT contains the addresses of the DSDT and FACS) - * - ******************************************************************************/ - -void acpi_tb_parse_fadt(u32 table_index, u8 flags) -{ - u32 length; - struct acpi_table_header *table; - - /* - * The FADT has multiple versions with different lengths, - * and it contains pointers to both the DSDT and FACS tables. - * - * Get a local copy of the FADT and convert it to a common format - * Map entire FADT, assumed to be smaller than one page. - */ - length = acpi_gbl_root_table_list.tables[table_index].length; - - table = - acpi_os_map_memory(acpi_gbl_root_table_list.tables[table_index]. - address, length); - if (!table) { - return; - } - - /* - * Validate the FADT checksum before we copy the table. Ignore - * checksum error as we want to try to get the DSDT and FACS. - */ - (void)acpi_tb_verify_checksum(table, length); - - /* Obtain a local copy of the FADT in common ACPI 2.0+ format */ - - acpi_tb_create_local_fadt(table, length); - - /* All done with the real FADT, unmap it */ - - acpi_os_unmap_memory(table, length); - - /* Obtain the DSDT and FACS tables via their addresses within the FADT */ - - acpi_tb_install_table((acpi_physical_address) acpi_gbl_FADT.Xdsdt, - flags, ACPI_SIG_DSDT, ACPI_TABLE_INDEX_DSDT); - - acpi_tb_install_table((acpi_physical_address) acpi_gbl_FADT.Xfacs, - flags, ACPI_SIG_FACS, ACPI_TABLE_INDEX_FACS); -} - -/******************************************************************************* - * - * FUNCTION: acpi_tb_create_local_fadt - * - * PARAMETERS: Table - Pointer to BIOS FADT - * Length - Length of the table - * - * RETURN: None - * - * DESCRIPTION: Get a local copy of the FADT and convert it to a common format. - * Performs validation on some important FADT fields. - * - * NOTE: We create a local copy of the FADT regardless of the version. - * - ******************************************************************************/ - -void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length) -{ - - /* - * Check if the FADT is larger than the largest table that we expect - * (the ACPI 2.0/3.0 version). If so, truncate the table, and issue - * a warning. - */ - if (length > sizeof(struct acpi_table_fadt)) { - ACPI_WARNING((AE_INFO, - "FADT (revision %u) is longer than ACPI 2.0 version, " - "truncating length 0x%X to 0x%zX", - table->revision, (unsigned)length, - sizeof(struct acpi_table_fadt))); - } - - /* Clear the entire local FADT */ - - ACPI_MEMSET(&acpi_gbl_FADT, 0, sizeof(struct acpi_table_fadt)); - - /* Copy the original FADT, up to sizeof (struct acpi_table_fadt) */ - - ACPI_MEMCPY(&acpi_gbl_FADT, table, - ACPI_MIN(length, sizeof(struct acpi_table_fadt))); - - /* - * 1) Convert the local copy of the FADT to the common internal format - * 2) Validate some of the important values within the FADT - */ - acpi_tb_convert_fadt(); -} - -/******************************************************************************* - * - * FUNCTION: acpi_tb_convert_fadt - * - * PARAMETERS: None, uses acpi_gbl_FADT - * - * RETURN: None - * - * DESCRIPTION: Converts all versions of the FADT to a common internal format. - * Expand all 32-bit addresses to 64-bit. - * - * NOTE: acpi_gbl_FADT must be of size (struct acpi_table_fadt), - * and must contain a copy of the actual FADT. - * - * ACPICA will use the "X" fields of the FADT for all addresses. - * - * "X" fields are optional extensions to the original V1.0 fields. Even if - * they are present in the structure, they can be optionally not used by - * setting them to zero. Therefore, we must selectively expand V1.0 fields - * if the corresponding X field is zero. - * - * For ACPI 1.0 FADTs, all address fields are expanded to the corresponding - * "X" fields. - * - * For ACPI 2.0 FADTs, any "X" fields that are NULL are filled in by - * expanding the corresponding ACPI 1.0 field. - * - ******************************************************************************/ - -static void acpi_tb_convert_fadt(void) -{ - u8 pm1_register_bit_width; - u8 pm1_register_byte_width; - struct acpi_generic_address *target64; - u32 i; - - /* Update the local FADT table header length */ - - acpi_gbl_FADT.header.length = sizeof(struct acpi_table_fadt); - - /* - * Expand the 32-bit FACS and DSDT addresses to 64-bit as necessary. - * Later code will always use the X 64-bit field. Also, check for an - * address mismatch between the 32-bit and 64-bit address fields - * (FIRMWARE_CTRL/X_FIRMWARE_CTRL, DSDT/X_DSDT) which would indicate - * the presence of two FACS or two DSDT tables. - */ - if (!acpi_gbl_FADT.Xfacs) { - acpi_gbl_FADT.Xfacs = (u64) acpi_gbl_FADT.facs; - } else if (acpi_gbl_FADT.facs && - (acpi_gbl_FADT.Xfacs != (u64) acpi_gbl_FADT.facs)) { - ACPI_WARNING((AE_INFO, - "32/64 FACS address mismatch in FADT - two FACS tables!")); - } - - if (!acpi_gbl_FADT.Xdsdt) { - acpi_gbl_FADT.Xdsdt = (u64) acpi_gbl_FADT.dsdt; - } else if (acpi_gbl_FADT.dsdt && - (acpi_gbl_FADT.Xdsdt != (u64) acpi_gbl_FADT.dsdt)) { - ACPI_WARNING((AE_INFO, - "32/64 DSDT address mismatch in FADT - two DSDT tables!")); - } - - /* - * For ACPI 1.0 FADTs (revision 1 or 2), ensure that reserved fields which - * should be zero are indeed zero. This will workaround BIOSs that - * inadvertently place values in these fields. - * - * The ACPI 1.0 reserved fields that will be zeroed are the bytes located at - * offset 45, 55, 95, and the word located at offset 109, 110. - */ - if (acpi_gbl_FADT.header.revision < FADT2_REVISION_ID) { - acpi_gbl_FADT.preferred_profile = 0; - acpi_gbl_FADT.pstate_control = 0; - acpi_gbl_FADT.cst_control = 0; - acpi_gbl_FADT.boot_flags = 0; - } - - /* - * Expand the ACPI 1.0 32-bit addresses to the ACPI 2.0 64-bit "X" - * generic address structures as necessary. Later code will always use - * the 64-bit address structures. - */ - for (i = 0; i < ACPI_FADT_INFO_ENTRIES; i++) { - target64 = - ACPI_ADD_PTR(struct acpi_generic_address, &acpi_gbl_FADT, - fadt_info_table[i].address64); - - /* Expand only if the 64-bit X target is null */ - - if (!target64->address) { - - /* The space_id is always I/O for the 32-bit legacy address fields */ - - acpi_tb_init_generic_address(target64, - ACPI_ADR_SPACE_SYSTEM_IO, - *ACPI_ADD_PTR(u8, - &acpi_gbl_FADT, - fadt_info_table - [i].length), - (u64) * ACPI_ADD_PTR(u32, - &acpi_gbl_FADT, - fadt_info_table - [i]. - address32)); - } - } - - /* Validate FADT values now, before we make any changes */ - - acpi_tb_validate_fadt(); - - /* - * Optionally check all register lengths against the default values and - * update them if they are incorrect. - */ - if (acpi_gbl_use_default_register_widths) { - for (i = 0; i < ACPI_FADT_INFO_ENTRIES; i++) { - target64 = - ACPI_ADD_PTR(struct acpi_generic_address, - &acpi_gbl_FADT, - fadt_info_table[i].address64); - - /* - * If a valid register (Address != 0) and the (default_length > 0) - * (Not a GPE register), then check the width against the default. - */ - if ((target64->address) && - (fadt_info_table[i].default_length > 0) && - (fadt_info_table[i].default_length != - target64->bit_width)) { - ACPI_WARNING((AE_INFO, - "Invalid length for %s: %d, using default %d", - fadt_info_table[i].name, - target64->bit_width, - fadt_info_table[i]. - default_length)); - - /* Incorrect size, set width to the default */ - - target64->bit_width = - fadt_info_table[i].default_length; - } - } - } - - /* - * Get the length of the individual PM1 registers (enable and status). - * Each register is defined to be (event block length / 2). - */ - pm1_register_bit_width = - (u8)ACPI_DIV_2(acpi_gbl_FADT.xpm1a_event_block.bit_width); - pm1_register_byte_width = (u8)ACPI_DIV_8(pm1_register_bit_width); - - /* - * Adjust the lengths of the PM1 Event Blocks so that they can be used to - * access the PM1 status register(s). Use (width / 2) - */ - acpi_gbl_FADT.xpm1a_event_block.bit_width = pm1_register_bit_width; - acpi_gbl_FADT.xpm1b_event_block.bit_width = pm1_register_bit_width; - - /* - * Calculate separate GAS structs for the PM1 Enable registers. - * These addresses do not appear (directly) in the FADT, so it is - * useful to calculate them once, here. - * - * The PM event blocks are split into two register blocks, first is the - * PM Status Register block, followed immediately by the PM Enable - * Register block. Each is of length (xpm1x_event_block.bit_width/2). - * - * On various systems the v2 fields (and particularly the bit widths) - * cannot be relied upon, though. Hence resort to using the v1 length - * here (and warn about the inconsistency). - */ - if (acpi_gbl_FADT.xpm1a_event_block.bit_width - != acpi_gbl_FADT.pm1_event_length * 8) - printk(KERN_WARNING "FADT: " - "X_PM1a_EVT_BLK.bit_width (%u) does not match" - " PM1_EVT_LEN (%u)\n", - acpi_gbl_FADT.xpm1a_event_block.bit_width, - acpi_gbl_FADT.pm1_event_length); - - /* The PM1A register block is required */ - - acpi_tb_init_generic_address(&acpi_gbl_xpm1a_enable, - acpi_gbl_FADT.xpm1a_event_block.space_id, - pm1_register_byte_width, - (acpi_gbl_FADT.xpm1a_event_block.address + - pm1_register_byte_width)); - /* Don't forget to copy space_id of the GAS */ - acpi_gbl_xpm1a_enable.space_id = - acpi_gbl_FADT.xpm1a_event_block.space_id; - - /* The PM1B register block is optional, ignore if not present */ - - if (acpi_gbl_FADT.xpm1b_event_block.address) { - if (acpi_gbl_FADT.xpm1b_event_block.bit_width - != acpi_gbl_FADT.pm1_event_length * 8) - printk(KERN_WARNING "FADT: " - "X_PM1b_EVT_BLK.bit_width (%u) does not match" - " PM1_EVT_LEN (%u)\n", - acpi_gbl_FADT.xpm1b_event_block.bit_width, - acpi_gbl_FADT.pm1_event_length); - acpi_tb_init_generic_address(&acpi_gbl_xpm1b_enable, - acpi_gbl_FADT.xpm1b_event_block.space_id, - pm1_register_byte_width, - (acpi_gbl_FADT.xpm1b_event_block. - address + pm1_register_byte_width)); - /* Don't forget to copy space_id of the GAS */ - acpi_gbl_xpm1b_enable.space_id = - acpi_gbl_FADT.xpm1b_event_block.space_id; - - } -} - -/****************************************************************************** - * - * FUNCTION: acpi_tb_validate_fadt - * - * PARAMETERS: Table - Pointer to the FADT to be validated - * - * RETURN: None - * - * DESCRIPTION: Validate various important fields within the FADT. If a problem - * is found, issue a message, but no status is returned. - * Used by both the table manager and the disassembler. - * - * Possible additional checks: - * (acpi_gbl_FADT.pm1_event_length >= 4) - * (acpi_gbl_FADT.pm1_control_length >= 2) - * (acpi_gbl_FADT.pm_timer_length >= 4) - * Gpe block lengths must be multiple of 2 - * - ******************************************************************************/ - -static void acpi_tb_validate_fadt(void) -{ - char *name; - u32 *address32; - struct acpi_generic_address *address64; - u8 length; - u32 i; - - /* - * Check for FACS and DSDT address mismatches. An address mismatch between - * the 32-bit and 64-bit address fields (FIRMWARE_CTRL/X_FIRMWARE_CTRL and - * DSDT/X_DSDT) would indicate the presence of two FACS or two DSDT tables. - */ - if (acpi_gbl_FADT.facs && - (acpi_gbl_FADT.Xfacs != (u64) acpi_gbl_FADT.facs)) { - ACPI_WARNING((AE_INFO, - "32/64X FACS address mismatch in FADT - " - "two FACS tables! %8.8X/%8.8X%8.8X", - acpi_gbl_FADT.facs, - ACPI_FORMAT_UINT64(acpi_gbl_FADT.Xfacs))); - } - - if (acpi_gbl_FADT.dsdt && - (acpi_gbl_FADT.Xdsdt != (u64) acpi_gbl_FADT.dsdt)) { - ACPI_WARNING((AE_INFO, - "32/64X DSDT address mismatch in FADT - " - "two DSDT tables! %8.8X/%8.8X%8.8X", - acpi_gbl_FADT.dsdt, - ACPI_FORMAT_UINT64(acpi_gbl_FADT.Xdsdt))); - } - - /* Examine all of the 64-bit extended address fields (X fields) */ - - for (i = 0; i < ACPI_FADT_INFO_ENTRIES; i++) { - /* - * Generate pointers to the 32-bit and 64-bit addresses, get the - * register length (width), and the register name - */ - address64 = ACPI_ADD_PTR(struct acpi_generic_address, - &acpi_gbl_FADT, - fadt_info_table[i].address64); - address32 = - ACPI_ADD_PTR(u32, &acpi_gbl_FADT, - fadt_info_table[i].address32); - length = - *ACPI_ADD_PTR(u8, &acpi_gbl_FADT, - fadt_info_table[i].length); - name = fadt_info_table[i].name; - - /* - * For each extended field, check for length mismatch between the - * legacy length field and the corresponding 64-bit X length field. - */ - if (address64 && (address64->bit_width != ACPI_MUL_8(length))) { - ACPI_WARNING((AE_INFO, - "32/64X length mismatch in %s: %d/%d", - name, ACPI_MUL_8(length), - address64->bit_width)); - } - - if (fadt_info_table[i].type & ACPI_FADT_REQUIRED) { - /* - * Field is required (Pm1a_event, Pm1a_control, pm_timer). - * Both the address and length must be non-zero. - */ - if (!address64->address || !length) { - ACPI_ERROR((AE_INFO, - "Required field %s has zero address and/or length: %8.8X%8.8X/%X", - name, - ACPI_FORMAT_UINT64(address64-> - address), - length)); - } - } else if (fadt_info_table[i].type & ACPI_FADT_SEPARATE_LENGTH) { - /* - * Field is optional (PM2Control, GPE0, GPE1) AND has its own - * length field. If present, both the address and length must be valid. - */ - if ((address64->address && !length) - || (!address64->address && length)) { - ACPI_WARNING((AE_INFO, - "Optional field %s has zero address or length: %8.8X%8.8X/%X", - name, - ACPI_FORMAT_UINT64(address64-> - address), - length)); - } - } - - /* If both 32- and 64-bit addresses are valid (non-zero), they must match */ - - if (address64->address && *address32 && - (address64->address != (u64) * address32)) { - ACPI_ERROR((AE_INFO, - "32/64X address mismatch in %s: %8.8X/%8.8X%8.8X, using 64X", - name, *address32, - ACPI_FORMAT_UINT64(address64->address))); - } - } -} |