diff options
Diffstat (limited to 'drivers/ata')
| -rw-r--r-- | drivers/ata/libahci.c | 21 | ||||
| -rw-r--r-- | drivers/ata/sata_sil24.c | 12 | ||||
| -rw-r--r-- | drivers/ata/sata_via.c | 18 |
3 files changed, 25 insertions, 26 deletions
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index 1984a6e89e84..261f86d102e8 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -541,29 +541,11 @@ static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val) return -EINVAL; } -static int ahci_is_device_present(void __iomem *port_mmio) -{ - u8 status = readl(port_mmio + PORT_TFDATA) & 0xff; - - /* Make sure PxTFD.STS.BSY and PxTFD.STS.DRQ are 0 */ - if (status & (ATA_BUSY | ATA_DRQ)) - return 0; - - /* Make sure PxSSTS.DET is 3h */ - status = readl(port_mmio + PORT_SCR_STAT) & 0xf; - if (status != 3) - return 0; - return 1; -} - void ahci_start_engine(struct ata_port *ap) { void __iomem *port_mmio = ahci_port_base(ap); u32 tmp; - if (!ahci_is_device_present(port_mmio)) - return; - /* start DMA */ tmp = readl(port_mmio + PORT_CMD); tmp |= PORT_CMD_START; @@ -1892,6 +1874,9 @@ static void ahci_error_handler(struct ata_port *ap) } sata_pmp_error_handler(ap); + + if (!ata_dev_enabled(ap->link.device)) + ahci_stop_engine(ap); } static void ahci_post_internal_cmd(struct ata_queued_cmd *qc) diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c index e9250514734b..70b58fe9e5b1 100644 --- a/drivers/ata/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -539,12 +539,12 @@ static void sil24_config_port(struct ata_port *ap) writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR); /* zero error counters. */ - writel(0x8000, port + PORT_DECODE_ERR_THRESH); - writel(0x8000, port + PORT_CRC_ERR_THRESH); - writel(0x8000, port + PORT_HSHK_ERR_THRESH); - writel(0x0000, port + PORT_DECODE_ERR_CNT); - writel(0x0000, port + PORT_CRC_ERR_CNT); - writel(0x0000, port + PORT_HSHK_ERR_CNT); + writew(0x8000, port + PORT_DECODE_ERR_THRESH); + writew(0x8000, port + PORT_CRC_ERR_THRESH); + writew(0x8000, port + PORT_HSHK_ERR_THRESH); + writew(0x0000, port + PORT_DECODE_ERR_CNT); + writew(0x0000, port + PORT_CRC_ERR_CNT); + writew(0x0000, port + PORT_HSHK_ERR_CNT); /* always use 64bit activation */ writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR); diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index 0ecd0f6aa2c0..4730c42a5ee5 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -578,10 +578,24 @@ static void svia_configure(struct pci_dev *pdev) /* * vt6421 has problems talking to some drives. The following - * is the magic fix from Joseph Chan <JosephChan@via.com.tw>. - * Please add proper documentation if possible. + * is the fix from Joseph Chan <JosephChan@via.com.tw>. + * + * When host issues HOLD, device may send up to 20DW of data + * before acknowledging it with HOLDA and the host should be + * able to buffer them in FIFO. Unfortunately, some WD drives + * send upto 40DW before acknowledging HOLD and, in the + * default configuration, this ends up overflowing vt6421's + * FIFO, making the controller abort the transaction with + * R_ERR. + * + * Rx52[2] is the internal 128DW FIFO Flow control watermark + * adjusting mechanism enable bit and the default value 0 + * means host will issue HOLD to device when the left FIFO + * size goes below 32DW. Setting it to 1 makes the watermark + * 64DW. * * https://bugzilla.kernel.org/show_bug.cgi?id=15173 + * http://article.gmane.org/gmane.linux.ide/46352 */ if (pdev->device == 0x3249) { pci_read_config_byte(pdev, 0x52, &tmp8); |