summaryrefslogtreecommitdiffstats
path: root/drivers/char/ftape/lowlevel/fdc-io.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/char/ftape/lowlevel/fdc-io.c')
-rw-r--r--drivers/char/ftape/lowlevel/fdc-io.c1349
1 files changed, 0 insertions, 1349 deletions
diff --git a/drivers/char/ftape/lowlevel/fdc-io.c b/drivers/char/ftape/lowlevel/fdc-io.c
deleted file mode 100644
index bbcf918f056f..000000000000
--- a/drivers/char/ftape/lowlevel/fdc-io.c
+++ /dev/null
@@ -1,1349 +0,0 @@
-/*
- * Copyright (C) 1993-1996 Bas Laarhoven,
- * (C) 1996-1997 Claus-Justus Heine.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; see the file COPYING. If not, write to
- the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
- *
- * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/fdc-io.c,v $
- * $Revision: 1.7.4.2 $
- * $Date: 1997/11/16 14:48:17 $
- *
- * This file contains the low-level floppy disk interface code
- * for the QIC-40/80/3010/3020 floppy-tape driver "ftape" for
- * Linux.
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/dma.h>
-#include <asm/irq.h>
-
-#include <linux/ftape.h>
-#include <linux/qic117.h>
-#include "../lowlevel/ftape-tracing.h"
-#include "../lowlevel/fdc-io.h"
-#include "../lowlevel/fdc-isr.h"
-#include "../lowlevel/ftape-io.h"
-#include "../lowlevel/ftape-rw.h"
-#include "../lowlevel/ftape-ctl.h"
-#include "../lowlevel/ftape-calibr.h"
-#include "../lowlevel/fc-10.h"
-
-/* Global vars.
- */
-static int ftape_motor;
-volatile int ftape_current_cylinder = -1;
-volatile fdc_mode_enum fdc_mode = fdc_idle;
-fdc_config_info fdc;
-DECLARE_WAIT_QUEUE_HEAD(ftape_wait_intr);
-
-unsigned int ft_fdc_base = CONFIG_FT_FDC_BASE;
-unsigned int ft_fdc_irq = CONFIG_FT_FDC_IRQ;
-unsigned int ft_fdc_dma = CONFIG_FT_FDC_DMA;
-unsigned int ft_fdc_threshold = CONFIG_FT_FDC_THR; /* bytes */
-unsigned int ft_fdc_rate_limit = CONFIG_FT_FDC_MAX_RATE; /* bits/sec */
-int ft_probe_fc10 = CONFIG_FT_PROBE_FC10;
-int ft_mach2 = CONFIG_FT_MACH2;
-
-/* Local vars.
- */
-static spinlock_t fdc_io_lock;
-static unsigned int fdc_calibr_count;
-static unsigned int fdc_calibr_time;
-static int fdc_status;
-volatile __u8 fdc_head; /* FDC head from sector id */
-volatile __u8 fdc_cyl; /* FDC track from sector id */
-volatile __u8 fdc_sect; /* FDC sector from sector id */
-static int fdc_data_rate = 500; /* data rate (Kbps) */
-static int fdc_rate_code; /* data rate code (0 == 500 Kbps) */
-static int fdc_seek_rate = 2; /* step rate (msec) */
-static void (*do_ftape) (void);
-static int fdc_fifo_state; /* original fifo setting - fifo enabled */
-static int fdc_fifo_thr; /* original fifo setting - threshold */
-static int fdc_lock_state; /* original lock setting - locked */
-static int fdc_fifo_locked; /* has fifo && lock set ? */
-static __u8 fdc_precomp; /* default precomp. value (nsec) */
-static __u8 fdc_prec_code; /* fdc precomp. select code */
-
-static char ftape_id[] = "ftape"; /* used by request irq and free irq */
-
-static int fdc_set_seek_rate(int seek_rate);
-
-void fdc_catch_stray_interrupts(int count)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&fdc_io_lock, flags);
- if (count == 0) {
- ft_expected_stray_interrupts = 0;
- } else {
- ft_expected_stray_interrupts += count;
- }
- spin_unlock_irqrestore(&fdc_io_lock, flags);
-}
-
-/* Wait during a timeout period for a given FDC status.
- * If usecs == 0 then just test status, else wait at least for usecs.
- * Returns -ETIME on timeout. Function must be calibrated first !
- */
-static int fdc_wait(unsigned int usecs, __u8 mask, __u8 state)
-{
- int count_1 = (fdc_calibr_count * usecs +
- fdc_calibr_count - 1) / fdc_calibr_time;
-
- do {
- fdc_status = inb_p(fdc.msr);
- if ((fdc_status & mask) == state) {
- return 0;
- }
- } while (count_1-- >= 0);
- return -ETIME;
-}
-
-int fdc_ready_wait(unsigned int usecs)
-{
- return fdc_wait(usecs, FDC_DATA_READY | FDC_BUSY, FDC_DATA_READY);
-}
-
-/* Why can't we just use udelay()?
- */
-static void fdc_usec_wait(unsigned int usecs)
-{
- fdc_wait(usecs, 0, 1); /* will always timeout ! */
-}
-
-static int fdc_ready_out_wait(unsigned int usecs)
-{
- fdc_usec_wait(FT_RQM_DELAY); /* wait for valid RQM status */
- return fdc_wait(usecs, FDC_DATA_OUT_READY, FDC_DATA_OUT_READY);
-}
-
-void fdc_wait_calibrate(void)
-{
- ftape_calibrate("fdc_wait",
- fdc_usec_wait, &fdc_calibr_count, &fdc_calibr_time);
-}
-
-/* Wait for a (short) while for the FDC to become ready
- * and transfer the next command byte.
- * Return -ETIME on timeout on getting ready (depends on hardware!).
- */
-static int fdc_write(const __u8 data)
-{
- fdc_usec_wait(FT_RQM_DELAY); /* wait for valid RQM status */
- if (fdc_wait(150, FDC_DATA_READY_MASK, FDC_DATA_IN_READY) < 0) {
- return -ETIME;
- } else {
- outb(data, fdc.fifo);
- return 0;
- }
-}
-
-/* Wait for a (short) while for the FDC to become ready
- * and transfer the next result byte.
- * Return -ETIME if timeout on getting ready (depends on hardware!).
- */
-static int fdc_read(__u8 * data)
-{
- fdc_usec_wait(FT_RQM_DELAY); /* wait for valid RQM status */
- if (fdc_wait(150, FDC_DATA_READY_MASK, FDC_DATA_OUT_READY) < 0) {
- return -ETIME;
- } else {
- *data = inb(fdc.fifo);
- return 0;
- }
-}
-
-/* Output a cmd_len long command string to the FDC.
- * The FDC should be ready to receive a new command or
- * an error (EBUSY or ETIME) will occur.
- */
-int fdc_command(const __u8 * cmd_data, int cmd_len)
-{
- int result = 0;
- unsigned long flags;
- int count = cmd_len;
- int retry = 0;
-#ifdef TESTING
- static unsigned int last_time;
- unsigned int time;
-#endif
- TRACE_FUN(ft_t_any);
-
- fdc_usec_wait(FT_RQM_DELAY); /* wait for valid RQM status */
- spin_lock_irqsave(&fdc_io_lock, flags);
- if (!in_interrupt())
- /* Yes, I know, too much comments inside this function
- * ...
- *
- * Yet another bug in the original driver. All that
- * havoc is caused by the fact that the isr() sends
- * itself a command to the floppy tape driver (pause,
- * micro step pause). Now, the problem is that
- * commands are transmitted via the fdc_seek
- * command. But: the fdc performs seeks in the
- * background i.e. it doesn't signal busy while
- * sending the step pulses to the drive. Therefore the
- * non-interrupt level driver has no chance to tell
- * whether the isr() just has issued a seek. Therefore
- * we HAVE TO have a look at the ft_hide_interrupt
- * flag: it signals the non-interrupt level part of
- * the driver that it has to wait for the fdc until it
- * has completet seeking.
- *
- * THIS WAS PRESUMABLY THE REASON FOR ALL THAT
- * "fdc_read timeout" errors, I HOPE :-)
- */
- if (ft_hide_interrupt) {
- restore_flags(flags);
- TRACE(ft_t_info,
- "Waiting for the isr() completing fdc_seek()");
- if (fdc_interrupt_wait(2 * FT_SECOND) < 0) {
- TRACE(ft_t_warn,
- "Warning: timeout waiting for isr() seek to complete");
- }
- if (ft_hide_interrupt || !ft_seek_completed) {
- /* There cannot be another
- * interrupt. The isr() only stops
- * the tape and the next interrupt
- * won't come until we have send our
- * command to the drive.
- */
- TRACE_ABORT(-EIO, ft_t_bug,
- "BUG? isr() is still seeking?\n"
- KERN_INFO "hide: %d\n"
- KERN_INFO "seek: %d",
- ft_hide_interrupt,
- ft_seek_completed);
-
- }
- fdc_usec_wait(FT_RQM_DELAY); /* wait for valid RQM status */
- spin_lock_irqsave(&fdc_io_lock, flags);
- }
- fdc_status = inb(fdc.msr);
- if ((fdc_status & FDC_DATA_READY_MASK) != FDC_DATA_IN_READY) {
- spin_unlock_irqrestore(&fdc_io_lock, flags);
- TRACE_ABORT(-EBUSY, ft_t_err, "fdc not ready");
- }
- fdc_mode = *cmd_data; /* used by isr */
-#ifdef TESTING
- if (fdc_mode == FDC_SEEK) {
- time = ftape_timediff(last_time, ftape_timestamp());
- if (time < 6000) {
- TRACE(ft_t_bug,"Warning: short timeout between seek commands: %d",
- time);
- }
- }
-#endif
- if (!in_interrupt()) {
- /* shouldn't be cleared if called from isr
- */
- ft_interrupt_seen = 0;
- }
- while (count) {
- result = fdc_write(*cmd_data);
- if (result < 0) {
- TRACE(ft_t_fdc_dma,
- "fdc_mode = %02x, status = %02x at index %d",
- (int) fdc_mode, (int) fdc_status,
- cmd_len - count);
- if (++retry <= 3) {
- TRACE(ft_t_warn, "fdc_write timeout, retry");
- } else {
- TRACE(ft_t_err, "fdc_write timeout, fatal");
- /* recover ??? */
- break;
- }
- } else {
- --count;
- ++cmd_data;
- }
- }
-#ifdef TESTING
- if (fdc_mode == FDC_SEEK) {
- last_time = ftape_timestamp();
- }
-#endif
- spin_unlock_irqrestore(&fdc_io_lock, flags);
- TRACE_EXIT result;
-}
-
-/* Input a res_len long result string from the FDC.
- * The FDC should be ready to send the result or an error
- * (EBUSY or ETIME) will occur.
- */
-int fdc_result(__u8 * res_data, int res_len)
-{
- int result = 0;
- unsigned long flags;
- int count = res_len;
- int retry = 0;
- TRACE_FUN(ft_t_any);
-
- spin_lock_irqsave(&fdc_io_lock, flags);
- fdc_status = inb(fdc.msr);
- if ((fdc_status & FDC_DATA_READY_MASK) != FDC_DATA_OUT_READY) {
- TRACE(ft_t_err, "fdc not ready");
- result = -EBUSY;
- } else while (count) {
- if (!(fdc_status & FDC_BUSY)) {
- spin_unlock_irqrestore(&fdc_io_lock, flags);
- TRACE_ABORT(-EIO, ft_t_err, "premature end of result phase");
- }
- result = fdc_read(res_data);
- if (result < 0) {
- TRACE(ft_t_fdc_dma,
- "fdc_mode = %02x, status = %02x at index %d",
- (int) fdc_mode,
- (int) fdc_status,
- res_len - count);
- if (++retry <= 3) {
- TRACE(ft_t_warn, "fdc_read timeout, retry");
- } else {
- TRACE(ft_t_err, "fdc_read timeout, fatal");
- /* recover ??? */
- break;
- ++retry;
- }
- } else {
- --count;
- ++res_data;
- }
- }
- spin_unlock_irqrestore(&fdc_io_lock, flags);
- fdc_usec_wait(FT_RQM_DELAY); /* allow FDC to negate BSY */
- TRACE_EXIT result;
-}
-
-/* Handle command and result phases for
- * commands without data phase.
- */
-static int fdc_issue_command(const __u8 * out_data, int out_count,
- __u8 * in_data, int in_count)
-{
- TRACE_FUN(ft_t_any);
-
- if (out_count > 0) {
- TRACE_CATCH(fdc_command(out_data, out_count),);
- }
- /* will take 24 - 30 usec for fdc_sense_drive_status and
- * fdc_sense_interrupt_status commands.
- * 35 fails sometimes (5/9/93 SJL)
- * On a loaded system it incidentally takes longer than
- * this for the fdc to get ready ! ?????? WHY ??????
- * So until we know what's going on use a very long timeout.
- */
- TRACE_CATCH(fdc_ready_out_wait(500 /* usec */),);
- if (in_count > 0) {
- TRACE_CATCH(fdc_result(in_data, in_count),
- TRACE(ft_t_err, "result phase aborted"));
- }
- TRACE_EXIT 0;
-}
-
-/* Wait for FDC interrupt with timeout (in milliseconds).
- * Signals are blocked so the wait will not be aborted.
- * Note: interrupts must be enabled ! (23/05/93 SJL)
- */
-int fdc_interrupt_wait(unsigned int time)
-{
- DECLARE_WAITQUEUE(wait,current);
- sigset_t old_sigmask;
- static int resetting;
- long timeout;
-
- TRACE_FUN(ft_t_fdc_dma);
-
- if (waitqueue_active(&ftape_wait_intr)) {
- TRACE_ABORT(-EIO, ft_t_err, "error: nested call");
- }
- /* timeout time will be up to USPT microseconds too long ! */
- timeout = (1000 * time + FT_USPT - 1) / FT_USPT;
-
- spin_lock_irq(&current->sighand->siglock);
- old_sigmask = current->blocked;
- sigfillset(&current->blocked);
- recalc_sigpending();
- spin_unlock_irq(&current->sighand->siglock);
-
- set_current_state(TASK_INTERRUPTIBLE);
- add_wait_queue(&ftape_wait_intr, &wait);
- while (!ft_interrupt_seen && timeout)
- timeout = schedule_timeout_interruptible(timeout);
-
- spin_lock_irq(&current->sighand->siglock);
- current->blocked = old_sigmask;
- recalc_sigpending();
- spin_unlock_irq(&current->sighand->siglock);
-
- remove_wait_queue(&ftape_wait_intr, &wait);
- /* the following IS necessary. True: as well
- * wake_up_interruptible() as the schedule() set TASK_RUNNING
- * when they wakeup a task, BUT: it may very well be that
- * ft_interrupt_seen is already set to 1 when we enter here
- * in which case schedule() gets never called, and
- * TASK_RUNNING never set. This has the funny effect that we
- * execute all the code until we leave kernel space, but then
- * the task is stopped (a task CANNOT be preempted while in
- * kernel mode. Sending a pair of SIGSTOP/SIGCONT to the
- * tasks wakes it up again. Funny! :-)
- */
- current->state = TASK_RUNNING;
- if (ft_interrupt_seen) { /* woken up by interrupt */
- ft_interrupt_seen = 0;
- TRACE_EXIT 0;
- }
- /* Original comment:
- * In first instance, next statement seems unnecessary since
- * it will be cleared in fdc_command. However, a small part of
- * the software seems to rely on this being cleared here
- * (ftape_close might fail) so stick to it until things get fixed !
- */
- /* My deeply sought of knowledge:
- * Behold NO! It is obvious. fdc_reset() doesn't call fdc_command()
- * but nevertheless uses fdc_interrupt_wait(). OF COURSE this needs to
- * be reset here.
- */
- ft_interrupt_seen = 0; /* clear for next call */
- if (!resetting) {
- resetting = 1; /* break infinite recursion if reset fails */
- TRACE(ft_t_any, "cleanup reset");
- fdc_reset();
- resetting = 0;
- }
- TRACE_EXIT (signal_pending(current)) ? -EINTR : -ETIME;
-}
-
-/* Start/stop drive motor. Enable DMA mode.
- */
-void fdc_motor(int motor)
-{
- int unit = ft_drive_sel;
- int data = unit | FDC_RESET_NOT | FDC_DMA_MODE;
- TRACE_FUN(ft_t_any);
-
- ftape_motor = motor;
- if (ftape_motor) {
- data |= FDC_MOTOR_0 << unit;
- TRACE(ft_t_noise, "turning motor %d on", unit);
- } else {
- TRACE(ft_t_noise, "turning motor %d off", unit);
- }
- if (ft_mach2) {
- outb_p(data, fdc.dor2);
- } else {
- outb_p(data, fdc.dor);
- }
- ftape_sleep(10 * FT_MILLISECOND);
- TRACE_EXIT;
-}
-
-static void fdc_update_dsr(void)
-{
- TRACE_FUN(ft_t_any);
-
- TRACE(ft_t_flow, "rate = %d Kbps, precomp = %d ns",
- fdc_data_rate, fdc_precomp);
- if (fdc.type >= i82077) {
- outb_p((fdc_rate_code & 0x03) | fdc_prec_code, fdc.dsr);
- } else {
- outb_p(fdc_rate_code & 0x03, fdc.ccr);
- }
- TRACE_EXIT;
-}
-
-void fdc_set_write_precomp(int precomp)
-{
- TRACE_FUN(ft_t_any);
-
- TRACE(ft_t_noise, "New precomp: %d nsec", precomp);
- fdc_precomp = precomp;
- /* write precompensation can be set in multiples of 41.67 nsec.
- * round the parameter to the nearest multiple and convert it
- * into a fdc setting. Note that 0 means default to the fdc,
- * 7 is used instead of that.
- */
- fdc_prec_code = ((fdc_precomp + 21) / 42) << 2;
- if (fdc_prec_code == 0 || fdc_prec_code > (6 << 2)) {
- fdc_prec_code = 7 << 2;
- }
- fdc_update_dsr();
- TRACE_EXIT;
-}
-
-/* Reprogram the 82078 registers to use Data Rate Table 1 on all drives.
- */
-static void fdc_set_drive_specs(void)
-{
- __u8 cmd[] = { FDC_DRIVE_SPEC, 0x00, 0x00, 0x00, 0x00, 0xc0};
- int result;
- TRACE_FUN(ft_t_any);
-
- TRACE(ft_t_flow, "Setting of drive specs called");
- if (fdc.type >= i82078_1) {
- cmd[1] = (0 << 5) | (2 << 2);
- cmd[2] = (1 << 5) | (2 << 2);
- cmd[3] = (2 << 5) | (2 << 2);
- cmd[4] = (3 << 5) | (2 << 2);
- result = fdc_command(cmd, NR_ITEMS(cmd));
- if (result < 0) {
- TRACE(ft_t_err, "Setting of drive specs failed");
- }
- }
- TRACE_EXIT;
-}
-
-/* Select clock for fdc, must correspond with tape drive setting !
- * This also influences the fdc timing so we must adjust some values.
- */
-int fdc_set_data_rate(int rate)
-{
- int bad_rate = 0;
- TRACE_FUN(ft_t_any);
-
- /* Select clock for fdc, must correspond with tape drive setting !
- * This also influences the fdc timing so we must adjust some values.
- */
- TRACE(ft_t_fdc_dma, "new rate = %d", rate);
- switch (rate) {
- case 250:
- fdc_rate_code = fdc_data_rate_250;
- break;
- case 500:
- fdc_rate_code = fdc_data_rate_500;
- break;
- case 1000:
- if (fdc.type < i82077) {
- bad_rate = 1;
- } else {
- fdc_rate_code = fdc_data_rate_1000;
- }
- break;
- case 2000:
- if (fdc.type < i82078_1) {
- bad_rate = 1;
- } else {
- fdc_rate_code = fdc_data_rate_2000;
- }
- break;
- default:
- bad_rate = 1;
- }
- if (bad_rate) {
- TRACE_ABORT(-EIO,
- ft_t_fdc_dma, "%d is not a valid data rate", rate);
- }
- fdc_data_rate = rate;
- fdc_update_dsr();
- fdc_set_seek_rate(fdc_seek_rate); /* clock changed! */
- ftape_udelay(1000);
- TRACE_EXIT 0;
-}
-
-/* keep the unit select if keep_select is != 0,
- */
-static void fdc_dor_reset(int keep_select)
-{
- __u8 fdc_ctl = ft_drive_sel;
-
- if (keep_select != 0) {
- fdc_ctl |= FDC_DMA_MODE;
- if (ftape_motor) {
- fdc_ctl |= FDC_MOTOR_0 << ft_drive_sel;
- }
- }
- ftape_udelay(10); /* ??? but seems to be necessary */
- if (ft_mach2) {
- outb_p(fdc_ctl & 0x0f, fdc.dor);
- outb_p(fdc_ctl, fdc.dor2);
- } else {
- outb_p(fdc_ctl, fdc.dor);
- }
- fdc_usec_wait(10); /* delay >= 14 fdc clocks */
- if (keep_select == 0) {
- fdc_ctl = 0;
- }
- fdc_ctl |= FDC_RESET_NOT;
- if (ft_mach2) {
- outb_p(fdc_ctl & 0x0f, fdc.dor);
- outb_p(fdc_ctl, fdc.dor2);
- } else {
- outb_p(fdc_ctl, fdc.dor);
- }
-}
-
-/* Reset the floppy disk controller. Leave the ftape_unit selected.
- */
-void fdc_reset(void)
-{
- int st0;
- int i;
- int dummy;
- unsigned long flags;
- TRACE_FUN(ft_t_any);
-
- spin_lock_irqsave(&fdc_io_lock, flags);
-
- fdc_dor_reset(1); /* keep unit selected */
-
- fdc_mode = fdc_idle;
-
- /* maybe the spin_lock_irq* pair is not necessary, BUT:
- * the following line MUST be here. Otherwise fdc_interrupt_wait()
- * won't wait. Note that fdc_reset() is called from
- * ftape_dumb_stop() when the fdc is busy transferring data. In this
- * case fdc_isr() MOST PROBABLY sets ft_interrupt_seen, and tries
- * to get the result bytes from the fdc etc. CLASH.
- */
- ft_interrupt_seen = 0;
-
- /* Program data rate
- */
- fdc_update_dsr(); /* restore data rate and precomp */
-
- spin_unlock_irqrestore(&fdc_io_lock, flags);
-
- /*
- * Wait for first polling cycle to complete
- */
- if (fdc_interrupt_wait(1 * FT_SECOND) < 0) {
- TRACE(ft_t_err, "no drive polling interrupt!");
- } else { /* clear all disk-changed statuses */
- for (i = 0; i < 4; ++i) {
- if(fdc_sense_interrupt_status(&st0, &dummy) != 0) {
- TRACE(ft_t_err, "sense failed for %d", i);
- }
- if (i == ft_drive_sel) {
- ftape_current_cylinder = dummy;
- }
- }
- TRACE(ft_t_noise, "drive polling completed");
- }
- /*
- * SPECIFY COMMAND
- */
- fdc_set_seek_rate(fdc_seek_rate);
- /*
- * DRIVE SPECIFICATION COMMAND (if fdc type known)
- */
- if (fdc.type >= i82078_1) {
- fdc_set_drive_specs();
- }
- TRACE_EXIT;
-}
-
-#if !defined(CLK_48MHZ)
-# define CLK_48MHZ 1
-#endif
-
-/* When we're done, put the fdc into reset mode so that the regular
- * floppy disk driver will figure out that something is wrong and
- * initialize the controller the way it wants.
- */
-void fdc_disable(void)
-{
- __u8 cmd1[] = {FDC_CONFIGURE, 0x00, 0x00, 0x00};
- __u8 cmd2[] = {FDC_LOCK};
- __u8 cmd3[] = {FDC_UNLOCK};
- __u8 stat[1];
- TRACE_FUN(ft_t_flow);
-
- if (!fdc_fifo_locked) {
- fdc_reset();
- TRACE_EXIT;
- }
- if (fdc_issue_command(cmd3, 1, stat, 1) < 0 || stat[0] != 0x00) {
- fdc_dor_reset(0);
- TRACE_ABORT(/**/, ft_t_bug,
- "couldn't unlock fifo, configuration remains changed");
- }
- fdc_fifo_locked = 0;
- if (CLK_48MHZ && fdc.type >= i82078) {
- cmd1[0] |= FDC_CLK48_BIT;
- }
- cmd1[2] = ((fdc_fifo_state) ? 0 : 0x20) + (fdc_fifo_thr - 1);
- if (fdc_command(cmd1, NR_ITEMS(cmd1)) < 0) {
- fdc_dor_reset(0);
- TRACE_ABORT(/**/, ft_t_bug,
- "couldn't reconfigure fifo to old state");
- }
- if (fdc_lock_state &&
- fdc_issue_command(cmd2, 1, stat, 1) < 0) {
- fdc_dor_reset(0);
- TRACE_ABORT(/**/, ft_t_bug, "couldn't lock old state again");
- }
- TRACE(ft_t_noise, "fifo restored: %sabled, thr. %d, %slocked",
- fdc_fifo_state ? "en" : "dis",
- fdc_fifo_thr, (fdc_lock_state) ? "" : "not ");
- fdc_dor_reset(0);
- TRACE_EXIT;
-}
-
-/* Specify FDC seek-rate (milliseconds)
- */
-static int fdc_set_seek_rate(int seek_rate)
-{
- /* set step rate, dma mode, and minimal head load and unload times
- */
- __u8 in[3] = { FDC_SPECIFY, 1, (1 << 1)};
-
- fdc_seek_rate = seek_rate;
- in[1] |= (16 - (fdc_data_rate * fdc_seek_rate) / 500) << 4;
-
- return fdc_command(in, 3);
-}
-
-/* Sense drive status: get unit's drive status (ST3)
- */
-int fdc_sense_drive_status(int *st3)
-{
- __u8 out[2];
- __u8 in[1];
- TRACE_FUN(ft_t_any);
-
- out[0] = FDC_SENSED;
- out[1] = ft_drive_sel;
- TRACE_CATCH(fdc_issue_command(out, 2, in, 1),);
- *st3 = in[0];
- TRACE_EXIT 0;
-}
-
-/* Sense Interrupt Status command:
- * should be issued at the end of each seek.
- * get ST0 and current cylinder.
- */
-int fdc_sense_interrupt_status(int *st0, int *current_cylinder)
-{
- __u8 out[1];
- __u8 in[2];
- TRACE_FUN(ft_t_any);
-
- out[0] = FDC_SENSEI;
- TRACE_CATCH(fdc_issue_command(out, 1, in, 2),);
- *st0 = in[0];
- *current_cylinder = in[1];
- TRACE_EXIT 0;
-}
-
-/* step to track
- */
-int fdc_seek(int track)
-{
- __u8 out[3];
- int st0, pcn;
-#ifdef TESTING
- unsigned int time;
-#endif
- TRACE_FUN(ft_t_any);
-
- out[0] = FDC_SEEK;
- out[1] = ft_drive_sel;
- out[2] = track;
-#ifdef TESTING
- time = ftape_timestamp();
-#endif
- /* We really need this command to work !
- */
- ft_seek_completed = 0;
- TRACE_CATCH(fdc_command(out, 3),
- fdc_reset();
- TRACE(ft_t_noise, "destination was: %d, resetting FDC...",
- track));
- /* Handle interrupts until ft_seek_completed or timeout.
- */
- for (;;) {
- TRACE_CATCH(fdc_interrupt_wait(2 * FT_SECOND),);
- if (ft_seek_completed) {
- TRACE_CATCH(fdc_sense_interrupt_status(&st0, &pcn),);
- if ((st0 & ST0_SEEK_END) == 0) {
- TRACE_ABORT(-EIO, ft_t_err,
- "no seek-end after seek completion !??");
- }
- break;
- }
- }
-#ifdef TESTING
- time = ftape_timediff(time, ftape_timestamp()) / abs(track - ftape_current_cylinder);
- if ((time < 900 || time > 3100) && abs(track - ftape_current_cylinder) > 5) {
- TRACE(ft_t_warn, "Wrong FDC STEP interval: %d usecs (%d)",
- time, track - ftape_current_cylinder);
- }
-#endif
- /* Verify whether we issued the right tape command.
- */
- /* Verify that we seek to the proper track. */
- if (pcn != track) {
- TRACE_ABORT(-EIO, ft_t_err, "bad seek..");
- }
- ftape_current_cylinder = track;
- TRACE_EXIT 0;
-}
-
-static int perpend_mode; /* set if fdc is in perpendicular mode */
-
-static int perpend_off(void)
-{
- __u8 perpend[] = {FDC_PERPEND, 0x00};
- TRACE_FUN(ft_t_any);
-
- if (perpend_mode) {
- /* Turn off perpendicular mode */
- perpend[1] = 0x80;
- TRACE_CATCH(fdc_command(perpend, 2),
- TRACE(ft_t_err,"Perpendicular mode exit failed!"));
- perpend_mode = 0;
- }
- TRACE_EXIT 0;
-}
-
-static int handle_perpend(int segment_id)
-{
- __u8 perpend[] = {FDC_PERPEND, 0x00};
- TRACE_FUN(ft_t_any);
-
- /* When writing QIC-3020 tapes, turn on perpendicular mode
- * if tape is moving in forward direction (even tracks).
- */
- if (ft_qic_std == QIC_TAPE_QIC3020 &&
- ((segment_id / ft_segments_per_track) & 1) == 0) {
-/* FIXME: some i82077 seem to support perpendicular mode as
- * well.
- */
-#if 0
- if (fdc.type < i82077AA) {}
-#else
- if (fdc.type < i82077 && ft_data_rate < 1000) {
-#endif
- /* fdc does not support perpendicular mode: complain
- */
- TRACE_ABORT(-EIO, ft_t_err,
- "Your FDC does not support QIC-3020.");
- }
- perpend[1] = 0x03 /* 0x83 + (0x4 << ft_drive_sel) */ ;
- TRACE_CATCH(fdc_command(perpend, 2),
- TRACE(ft_t_err,"Perpendicular mode entry failed!"));
- TRACE(ft_t_flow, "Perpendicular mode set");
- perpend_mode = 1;
- TRACE_EXIT 0;
- }
- TRACE_EXIT perpend_off();
-}
-
-static inline void fdc_setup_dma(char mode,
- volatile void *addr, unsigned int count)
-{
- /* Program the DMA controller.
- */
- disable_dma(fdc.dma);
- clear_dma_ff(fdc.dma);
- set_dma_mode(fdc.dma, mode);
- set_dma_addr(fdc.dma, virt_to_bus((void*)addr));
- set_dma_count(fdc.dma, count);
- enable_dma(fdc.dma);
-}
-
-/* Setup fdc and dma for formatting the next segment
- */
-int fdc_setup_formatting(buffer_struct * buff)
-{
- unsigned long flags;
- __u8 out[6] = {
- FDC_FORMAT, 0x00, 3, 4 * FT_SECTORS_PER_SEGMENT, 0x00, 0x6b
- };
- TRACE_FUN(ft_t_any);
-
- TRACE_CATCH(handle_perpend(buff->segment_id),);
- /* Program the DMA controller.
- */
- TRACE(ft_t_fdc_dma,
- "phys. addr. = %lx", virt_to_bus((void*) buff->ptr));
- spin_lock_irqsave(&fdc_io_lock, flags);
- fdc_setup_dma(DMA_MODE_WRITE, buff->ptr, FT_SECTORS_PER_SEGMENT * 4);
- /* Issue FDC command to start reading/writing.
- */
- out[1] = ft_drive_sel;
- out[4] = buff->gap3;
- TRACE_CATCH(fdc_setup_error = fdc_command(out, sizeof(out)),
- restore_flags(flags); fdc_mode = fdc_idle);
- spin_unlock_irqrestore(&fdc_io_lock, flags);
- TRACE_EXIT 0;
-}
-
-
-/* Setup Floppy Disk Controller and DMA to read or write the next cluster
- * of good sectors from or to the current segment.
- */
-int fdc_setup_read_write(buffer_struct * buff, __u8 operation)
-{
- unsigned long flags;
- __u8 out[9];
- int dma_mode;
- TRACE_FUN(ft_t_any);
-
- switch(operation) {
- case FDC_VERIFY:
- if (fdc.type < i82077) {
- operation = FDC_READ;
- }
- case FDC_READ:
- case FDC_READ_DELETED:
- dma_mode = DMA_MODE_READ;
- TRACE(ft_t_fdc_dma, "xfer %d sectors to 0x%p",
- buff->sector_count, buff->ptr);
- TRACE_CATCH(perpend_off(),);
- break;
- case FDC_WRITE_DELETED:
- TRACE(ft_t_noise, "deleting segment %d", buff->segment_id);
- case FDC_WRITE:
- dma_mode = DMA_MODE_WRITE;
- /* When writing QIC-3020 tapes, turn on perpendicular mode
- * if tape is moving in forward direction (even tracks).
- */
- TRACE_CATCH(handle_perpend(buff->segment_id),);
- TRACE(ft_t_fdc_dma, "xfer %d sectors from 0x%p",
- buff->sector_count, buff->ptr);
- break;
- default:
- TRACE_ABORT(-EIO,
- ft_t_bug, "bug: invalid operation parameter");
- }
- TRACE(ft_t_fdc_dma, "phys. addr. = %lx",virt_to_bus((void*)buff->ptr));
- spin_lock_irqsave(&fdc_io_lock, flags);
- if (operation != FDC_VERIFY) {
- fdc_setup_dma(dma_mode, buff->ptr,
- FT_SECTOR_SIZE * buff->sector_count);
- }
- /* Issue FDC command to start reading/writing.
- */
- out[0] = operation;
- out[1] = ft_drive_sel;
- out[2] = buff->cyl;
- out[3] = buff->head;
- out[4] = buff->sect + buff->sector_offset;
- out[5] = 3; /* Sector size of 1K. */
- out[6] = out[4] + buff->sector_count - 1; /* last sector */
- out[7] = 109; /* Gap length. */
- out[8] = 0xff; /* No limit to transfer size. */
- TRACE(ft_t_fdc_dma, "C: 0x%02x, H: 0x%02x, R: 0x%02x, cnt: 0x%02x",
- out[2], out[3], out[4], out[6] - out[4] + 1);
- spin_unlock_irqrestore(&fdc_io_lock, flags);
- TRACE_CATCH(fdc_setup_error = fdc_command(out, 9),fdc_mode = fdc_idle);
- TRACE_EXIT 0;
-}
-
-int fdc_fifo_threshold(__u8 threshold,
- int *fifo_state, int *lock_state, int *fifo_thr)
-{
- const __u8 cmd0[] = {FDC_DUMPREGS};
- __u8 cmd1[] = {FDC_CONFIGURE, 0, (0x0f & (threshold - 1)), 0};
- const __u8 cmd2[] = {FDC_LOCK};
- const __u8 cmd3[] = {FDC_UNLOCK};
- __u8 reg[10];
- __u8 stat;
- int i;
- int result;
- TRACE_FUN(ft_t_any);
-
- if (CLK_48MHZ && fdc.type >= i82078) {
- cmd1[0] |= FDC_CLK48_BIT;
- }
- /* Dump fdc internal registers for examination
- */
- TRACE_CATCH(fdc_command(cmd0, NR_ITEMS(cmd0)),
- TRACE(ft_t_warn, "dumpreg cmd failed, fifo unchanged"));
- /* Now read fdc internal registers from fifo
- */
- for (i = 0; i < (int)NR_ITEMS(reg); ++i) {
- fdc_read(&reg[i]);
- TRACE(ft_t_fdc_dma, "Register %d = 0x%02x", i, reg[i]);
- }
- if (fifo_state && lock_state && fifo_thr) {
- *fifo_state = (reg[8] & 0x20) == 0;
- *lock_state = reg[7] & 0x80;
- *fifo_thr = 1 + (reg[8] & 0x0f);
- }
- TRACE(ft_t_noise,
- "original fifo state: %sabled, threshold %d, %slocked",
- ((reg[8] & 0x20) == 0) ? "en" : "dis",
- 1 + (reg[8] & 0x0f), (reg[7] & 0x80) ? "" : "not ");
- /* If fdc is already locked, unlock it first ! */
- if (reg[7] & 0x80) {
- fdc_ready_wait(100);
- TRACE_CATCH(fdc_issue_command(cmd3, NR_ITEMS(cmd3), &stat, 1),
- TRACE(ft_t_bug, "FDC unlock command failed, "
- "configuration unchanged"));
- }
- fdc_fifo_locked = 0;
- /* Enable fifo and set threshold at xx bytes to allow a
- * reasonably large latency and reduce number of dma bursts.
- */
- fdc_ready_wait(100);
- if ((result = fdc_command(cmd1, NR_ITEMS(cmd1))) < 0) {
- TRACE(ft_t_bug, "configure cmd failed, fifo unchanged");
- }
- /* Now lock configuration so reset will not change it
- */
- if(fdc_issue_command(cmd2, NR_ITEMS(cmd2), &stat, 1) < 0 ||
- stat != 0x10) {
- TRACE_ABORT(-EIO, ft_t_bug,
- "FDC lock command failed, stat = 0x%02x", stat);
- }
- fdc_fifo_locked = 1;
- TRACE_EXIT result;
-}
-
-static int fdc_fifo_enable(void)
-{
- TRACE_FUN(ft_t_any);
-
- if (fdc_fifo_locked) {
- TRACE_ABORT(0, ft_t_warn, "Fifo not enabled because locked");
- }
- TRACE_CATCH(fdc_fifo_threshold(ft_fdc_threshold /* bytes */,
- &fdc_fifo_state,
- &fdc_lock_state,
- &fdc_fifo_thr),);
- TRACE_CATCH(fdc_fifo_threshold(ft_fdc_threshold /* bytes */,
- NULL, NULL, NULL),);
- TRACE_EXIT 0;
-}
-
-/* Determine fd controller type
- */
-static __u8 fdc_save_state[2];
-
-static int fdc_probe(void)
-{
- __u8 cmd[1];
- __u8 stat[16]; /* must be able to hold dumpregs & save results */
- int i;
- TRACE_FUN(ft_t_any);
-
- /* Try to find out what kind of fd controller we have to deal with
- * Scheme borrowed from floppy driver:
- * first try if FDC_DUMPREGS command works
- * (this indicates that we have a 82072 or better)
- * then try the FDC_VERSION command (82072 doesn't support this)
- * then try the FDC_UNLOCK command (some older 82077's don't support this)
- * then try the FDC_PARTID command (82078's support this)
- */
- cmd[0] = FDC_DUMPREGS;
- if (fdc_issue_command(cmd, 1, stat, 1) != 0) {
- TRACE_ABORT(no_fdc, ft_t_bug, "No FDC found");
- }
- if (stat[0] == 0x80) {
- /* invalid command: must be pre 82072 */
- TRACE_ABORT(i8272,
- ft_t_warn, "Type 8272A/765A compatible FDC found");
- }
- fdc_result(&stat[1], 9);
- fdc_save_state[0] = stat[7];
- fdc_save_state[1] = stat[8];
- cmd[0] = FDC_VERSION;
- if (fdc_issue_command(cmd, 1, stat, 1) < 0 || stat[0] == 0x80) {
- TRACE_ABORT(i8272, ft_t_warn, "Type 82072 FDC found");
- }
- if (*stat != 0x90) {
- TRACE_ABORT(i8272, ft_t_warn, "Unknown FDC found");
- }
- cmd[0] = FDC_UNLOCK;
- if(fdc_issue_command(cmd, 1, stat, 1) < 0 || stat[0] != 0x00) {
- TRACE_ABORT(i8272, ft_t_warn,
- "Type pre-1991 82077 FDC found, "
- "treating it like a 82072");
- }
- if (fdc_save_state[0] & 0x80) { /* was locked */
- cmd[0] = FDC_LOCK; /* restore lock */
- (void)fdc_issue_command(cmd, 1, stat, 1);
- TRACE(ft_t_warn, "FDC is already locked");
- }
- /* Test for a i82078 FDC */
- cmd[0] = FDC_PARTID;
- if (fdc_issue_command(cmd, 1, stat, 1) < 0 || stat[0] == 0x80) {
- /* invalid command: not a i82078xx type FDC */
- for (i = 0; i < 4; ++i) {
- outb_p(i, fdc.tdr);
- if ((inb_p(fdc.tdr) & 0x03) != i) {
- TRACE_ABORT(i82077,
- ft_t_warn, "Type 82077 FDC found");
- }
- }
- TRACE_ABORT(i82077AA, ft_t_warn, "Type 82077AA FDC found");
- }
- /* FDC_PARTID cmd succeeded */
- switch (stat[0] >> 5) {
- case 0x0:
- /* i82078SL or i82078-1. The SL part cannot run at
- * 2Mbps (the SL and -1 dies are identical; they are
- * speed graded after production, according to Intel).
- * Some SL's can be detected by doing a SAVE cmd and
- * look at bit 7 of the first byte (the SEL3V# bit).
- * If it is 0, the part runs off 3Volts, and hence it
- * is a SL.
- */
- cmd[0] = FDC_SAVE;
- if(fdc_issue_command(cmd, 1, stat, 16) < 0) {
- TRACE(ft_t_err, "FDC_SAVE failed. Dunno why");
- /* guess we better claim the fdc to be a i82078 */
- TRACE_ABORT(i82078,
- ft_t_warn,
- "Type i82078 FDC (i suppose) found");
- }
- if ((stat[0] & FDC_SEL3V_BIT)) {
- /* fdc running off 5Volts; Pray that it's a i82078-1
- */
- TRACE_ABORT(i82078_1, ft_t_warn,
- "Type i82078-1 or 5Volt i82078SL FDC found");
- }
- TRACE_ABORT(i82078, ft_t_warn,
- "Type 3Volt i82078SL FDC (1Mbps) found");
- case 0x1:
- case 0x2: /* S82078B */
- /* The '78B isn't '78 compatible. Detect it as a '77AA */
- TRACE_ABORT(i82077AA, ft_t_warn, "Type i82077AA FDC found");
- case 0x3: /* NSC PC8744 core; used in several super-IO chips */
- TRACE_ABORT(i82077AA,
- ft_t_warn, "Type 82077AA compatible FDC found");
- default:
- TRACE(ft_t_warn, "A previously undetected FDC found");
- TRACE_ABORT(i82077AA, ft_t_warn,
- "Treating it as a 82077AA. Please report partid= %d",
- stat[0]);
- } /* switch(stat[ 0] >> 5) */
- TRACE_EXIT no_fdc;
-}
-
-static int fdc_request_regions(void)
-{
- TRACE_FUN(ft_t_flow);
-
- if (ft_mach2 || ft_probe_fc10) {
- if (!request_region(fdc.sra, 8, "fdc (ft)")) {
-#ifndef BROKEN_FLOPPY_DRIVER
- TRACE_EXIT -EBUSY;
-#else
- TRACE(ft_t_warn,
-"address 0x%03x occupied (by floppy driver?), using it anyway", fdc.sra);
-#endif
- }
- } else {
- if (!request_region(fdc.sra, 6, "fdc (ft)")) {
-#ifndef BROKEN_FLOPPY_DRIVER
- TRACE_EXIT -EBUSY;
-#else
- TRACE(ft_t_warn,
-"address 0x%03x occupied (by floppy driver?), using it anyway", fdc.sra);
-#endif
- }
- if (!request_region(fdc.sra + 7, 1, "fdc (ft)")) {
-#ifndef BROKEN_FLOPPY_DRIVER
- release_region(fdc.sra, 6);
- TRACE_EXIT -EBUSY;
-#else
- TRACE(ft_t_warn,
-"address 0x%03x occupied (by floppy driver?), using it anyway", fdc.sra + 7);
-#endif
- }
- }
- TRACE_EXIT 0;
-}
-
-void fdc_release_regions(void)
-{
- TRACE_FUN(ft_t_flow);
-
- if (fdc.sra != 0) {
- if (fdc.dor2 != 0) {
- release_region(fdc.sra, 8);
- } else {
- release_region(fdc.sra, 6);
- release_region(fdc.dir, 1);
- }
- }
- TRACE_EXIT;
-}
-
-static int fdc_config_regs(unsigned int fdc_base,
- unsigned int fdc_irq,
- unsigned int fdc_dma)
-{
- TRACE_FUN(ft_t_flow);
-
- fdc.irq = fdc_irq;
- fdc.dma = fdc_dma;
- fdc.sra = fdc_base;
- fdc.srb = fdc_base + 1;
- fdc.dor = fdc_base + 2;
- fdc.tdr = fdc_base + 3;
- fdc.msr = fdc.dsr = fdc_base + 4;
- fdc.fifo = fdc_base + 5;
- fdc.dir = fdc.ccr = fdc_base + 7;
- fdc.dor2 = (ft_mach2 || ft_probe_fc10) ? fdc_base + 6 : 0;
- TRACE_CATCH(fdc_request_regions(), fdc.sra = 0);
- TRACE_EXIT 0;
-}
-
-static int fdc_config(void)
-{
- static int already_done;
- TRACE_FUN(ft_t_any);
-
- if (already_done) {
- TRACE_CATCH(fdc_request_regions(),);
- *(fdc.hook) = fdc_isr; /* hook our handler in */
- TRACE_EXIT 0;
- }
- if (ft_probe_fc10) {
- int fc_type;
-
- TRACE_CATCH(fdc_config_regs(ft_fdc_base,
- ft_fdc_irq, ft_fdc_dma),);
- fc_type = fc10_enable();
- if (fc_type != 0) {
- TRACE(ft_t_warn, "FC-%c0 controller found", '0' + fc_type);
- fdc.type = fc10;
- fdc.hook = &do_ftape;
- *(fdc.hook) = fdc_isr; /* hook our handler in */
- already_done = 1;
- TRACE_EXIT 0;
- } else {
- TRACE(ft_t_warn, "FC-10/20 controller not found");
- fdc_release_regions();
- fdc.type = no_fdc;
- ft_probe_fc10 = 0;
- ft_fdc_base = 0x3f0;
- ft_fdc_irq = 6;
- ft_fdc_dma = 2;
- }
- }
- TRACE(ft_t_warn, "fdc base: 0x%x, irq: %d, dma: %d",
- ft_fdc_base, ft_fdc_irq, ft_fdc_dma);
- TRACE_CATCH(fdc_config_regs(ft_fdc_base, ft_fdc_irq, ft_fdc_dma),);
- fdc.hook = &do_ftape;
- *(fdc.hook) = fdc_isr; /* hook our handler in */
- already_done = 1;
- TRACE_EXIT 0;
-}
-
-static irqreturn_t ftape_interrupt(int irq, void *dev_id)
-{
- void (*handler) (void) = *fdc.hook;
- int handled = 0;
- TRACE_FUN(ft_t_any);
-
- *fdc.hook = NULL;
- if (handler) {
- handled = 1;
- handler();
- } else {
- TRACE(ft_t_bug, "Unexpected ftape interrupt");
- }
- TRACE_EXIT IRQ_RETVAL(handled);
-}
-
-static int fdc_grab_irq_and_dma(void)
-{
- TRACE_FUN(ft_t_any);
-
- if (fdc.hook == &do_ftape) {
- /* Get fast interrupt handler.
- */
- if (request_irq(fdc.irq, ftape_interrupt,
- IRQF_DISABLED, "ft", ftape_id)) {
- TRACE_ABORT(-EIO, ft_t_bug,
- "Unable to grab IRQ%d for ftape driver",
- fdc.irq);
- }
- if (request_dma(fdc.dma, ftape_id)) {
- free_irq(fdc.irq, ftape_id);
- TRACE_ABORT(-EIO, ft_t_bug,
- "Unable to grab DMA%d for ftape driver",
- fdc.dma);
- }
- }
- if (ft_fdc_base != 0x3f0 && (ft_fdc_dma == 2 || ft_fdc_irq == 6)) {
- /* Using same dma channel or irq as standard fdc, need
- * to disable the dma-gate on the std fdc. This
- * couldn't be done in the floppy driver as some
- * laptops are using the dma-gate to enter a low power
- * or even suspended state :-(
- */
- outb_p(FDC_RESET_NOT, 0x3f2);
- TRACE(ft_t_noise, "DMA-gate on standard fdc disabled");
- }
- TRACE_EXIT 0;
-}
-
-int fdc_release_irq_and_dma(void)
-{
- TRACE_FUN(ft_t_any);
-
- if (fdc.hook == &do_ftape) {
- disable_dma(fdc.dma); /* just in case... */
- free_dma(fdc.dma);
- free_irq(fdc.irq, ftape_id);
- }
- if (ft_fdc_base != 0x3f0 && (ft_fdc_dma == 2 || ft_fdc_irq == 6)) {
- /* Using same dma channel as standard fdc, need to
- * disable the dma-gate on the std fdc. This couldn't
- * be done in the floppy driver as some laptops are
- * using the dma-gate to enter a low power or even
- * suspended state :-(
- */
- outb_p(FDC_RESET_NOT | FDC_DMA_MODE, 0x3f2);
- TRACE(ft_t_noise, "DMA-gate on standard fdc enabled again");
- }
- TRACE_EXIT 0;
-}
-
-int fdc_init(void)
-{
- TRACE_FUN(ft_t_any);
-
- /* find a FDC to use */
- TRACE_CATCH(fdc_config(),);
- TRACE_CATCH(fdc_grab_irq_and_dma(), fdc_release_regions());
- ftape_motor = 0;
- fdc_catch_stray_interrupts(0); /* clear number of awainted
- * stray interrupte
- */
- fdc_catch_stray_interrupts(1); /* one always comes (?) */
- TRACE(ft_t_flow, "resetting fdc");
- fdc_set_seek_rate(2); /* use nominal QIC step rate */
- fdc_reset(); /* init fdc & clear track counters */
- if (fdc.type == no_fdc) { /* no FC-10 or FC-20 found */
- fdc.type = fdc_probe();
- fdc_reset(); /* update with new knowledge */
- }
- if (fdc.type == no_fdc) {
- fdc_release_irq_and_dma();
- fdc_release_regions();
- TRACE_EXIT -ENXIO;
- }
- if (fdc.type >= i82077) {
- if (fdc_fifo_enable() < 0) {
- TRACE(ft_t_warn, "couldn't enable fdc fifo !");
- } else {
- TRACE(ft_t_flow, "fdc fifo enabled and locked");
- }
- }
- TRACE_EXIT 0;
-}