summaryrefslogtreecommitdiffstats
path: root/drivers/char
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/char')
-rw-r--r--drivers/char/agp/Kconfig55
-rw-r--r--drivers/char/agp/amd64-agp.c6
-rw-r--r--drivers/char/agp/sworks-agp.c4
-rw-r--r--drivers/char/drm/i915_irq.c5
-rw-r--r--drivers/char/drm/r300_cmdbuf.c48
-rw-r--r--drivers/char/drm/r300_reg.h3
-rw-r--r--drivers/char/drm/radeon_drv.h3
-rw-r--r--drivers/char/sysrq.c2
8 files changed, 81 insertions, 45 deletions
diff --git a/drivers/char/agp/Kconfig b/drivers/char/agp/Kconfig
index 486ed8a11b59..a4d425d2dce2 100644
--- a/drivers/char/agp/Kconfig
+++ b/drivers/char/agp/Kconfig
@@ -15,22 +15,23 @@ config AGP
due to kernel allocation issues), you could use PCI accesses
and have up to a couple gigs of texture space.
- Note that this is the only means to have XFree4/GLX use
+ Note that this is the only means to have X/GLX use
write-combining with MTRR support on the AGP bus. Without it, OpenGL
direct rendering will be a lot slower but still faster than PIO.
- You should say Y here if you use XFree86 3.3.6 or 4.x and want to
- use GLX or DRI. If unsure, say N.
-
To compile this driver as a module, choose M here: the
module will be called agpgart.
+ You should say Y here if you want to use GLX or DRI.
+
+ If unsure, say N.
+
config AGP_ALI
tristate "ALI chipset support"
depends on AGP && X86_32
---help---
This option gives you AGP support for the GLX component of
- XFree86 4.x on the following ALi chipsets. The supported chipsets
+ X on the following ALi chipsets. The supported chipsets
include M1541, M1621, M1631, M1632, M1641,M1647,and M1651.
For the ALi-chipset question, ALi suggests you refer to
<http://www.ali.com.tw/eng/support/index.shtml>.
@@ -40,28 +41,19 @@ config AGP_ALI
timing issues, this chipset cannot do AGP 2x with the G200.
This is a hardware limitation. AGP 1x seems to be fine, though.
- You should say Y here if you use XFree86 3.3.6 or 4.x and want to
- use GLX or DRI. If unsure, say N.
-
config AGP_ATI
tristate "ATI chipset support"
depends on AGP && X86_32
---help---
- This option gives you AGP support for the GLX component of
- XFree86 4.x on the ATI RadeonIGP family of chipsets.
-
- You should say Y here if you use XFree86 3.3.6 or 4.x and want to
- use GLX or DRI. If unsure, say N.
+ This option gives you AGP support for the GLX component of
+ X on the ATI RadeonIGP family of chipsets.
config AGP_AMD
tristate "AMD Irongate, 761, and 762 chipset support"
depends on AGP && X86_32
help
This option gives you AGP support for the GLX component of
- XFree86 4.x on AMD Irongate, 761, and 762 chipsets.
-
- You should say Y here if you use XFree86 3.3.6 or 4.x and want to
- use GLX or DRI. If unsure, say N.
+ X on AMD Irongate, 761, and 762 chipsets.
config AGP_AMD64
tristate "AMD Opteron/Athlon64 on-CPU GART support" if !GART_IOMMU
@@ -69,45 +61,38 @@ config AGP_AMD64
default y if GART_IOMMU
help
This option gives you AGP support for the GLX component of
- XFree86 4.x using the on-CPU northbridge of the AMD Athlon64/Opteron CPUs.
+ X using the on-CPU northbridge of the AMD Athlon64/Opteron CPUs.
You still need an external AGP bridge like the AMD 8151, VIA
K8T400M, SiS755. It may also support other AGP bridges when loaded
with agp_try_unsupported=1.
- You should say Y here if you use XFree86 3.3.6 or 4.x and want to
- use GLX or DRI. If unsure, say Y
config AGP_INTEL
tristate "Intel 440LX/BX/GX, I8xx and E7x05 chipset support"
depends on AGP && X86
help
- This option gives you AGP support for the GLX component of XFree86 4.x
+ This option gives you AGP support for the GLX component of X
on Intel 440LX/BX/GX, 815, 820, 830, 840, 845, 850, 860, 875,
- E7205 and E7505 chipsets and full support for the 810, 815, 830M, 845G,
- 852GM, 855GM, 865G and I915 integrated graphics chipsets.
+ E7205 and E7505 chipsets and full support for the 810, 815, 830M,
+ 845G, 852GM, 855GM, 865G and I915 integrated graphics chipsets.
+
- You should say Y here if you use XFree86 3.3.6 or 4.x and want to
- use GLX or DRI, or if you have any Intel integrated graphics
- chipsets. If unsure, say Y.
config AGP_NVIDIA
tristate "NVIDIA nForce/nForce2 chipset support"
depends on AGP && X86_32
help
This option gives you AGP support for the GLX component of
- XFree86 4.x on the following NVIDIA chipsets. The supported chipsets
- include nForce and nForce2
+ X on NVIDIA chipsets including nForce and nForce2
config AGP_SIS
tristate "SiS chipset support"
depends on AGP && X86_32
help
This option gives you AGP support for the GLX component of
- XFree86 4.x on Silicon Integrated Systems [SiS] chipsets.
+ X on Silicon Integrated Systems [SiS] chipsets.
Note that 5591/5592 AGP chipsets are NOT supported.
- You should say Y here if you use XFree86 3.3.6 or 4.x and want to
- use GLX or DRI. If unsure, say N.
config AGP_SWORKS
tristate "Serverworks LE/HE chipset support"
@@ -121,10 +106,7 @@ config AGP_VIA
depends on AGP && X86_32
help
This option gives you AGP support for the GLX component of
- XFree86 4.x on VIA MVP3/Apollo Pro chipsets.
-
- You should say Y here if you use XFree86 3.3.6 or 4.x and want to
- use GLX or DRI. If unsure, say N.
+ X on VIA MVP3/Apollo Pro chipsets.
config AGP_I460
tristate "Intel 460GX chipset support"
@@ -159,9 +141,6 @@ config AGP_EFFICEON
This option gives you AGP support for the Transmeta Efficeon
series processors with integrated northbridges.
- You should say Y here if you use XFree86 3.3.6 or 4.x and want to
- use GLX or DRI. If unsure, say Y.
-
config AGP_SGI_TIOCA
tristate "SGI TIO chipset AGP support"
depends on AGP && (IA64_SGI_SN2 || IA64_GENERIC)
diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c
index 9964c508c111..1251b2515bbe 100644
--- a/drivers/char/agp/amd64-agp.c
+++ b/drivers/char/agp/amd64-agp.c
@@ -516,8 +516,10 @@ static int __devinit nforce3_agp_init(struct pci_dev *pdev)
pci_read_config_dword (hammers[0], AMD64_GARTAPERTUREBASE, &apbase);
/* if x86-64 aperture base is beyond 4G, exit here */
- if ( (apbase & 0x7fff) >> (32 - 25) )
- return -ENODEV;
+ if ( (apbase & 0x7fff) >> (32 - 25) ) {
+ printk(KERN_INFO PFX "aperture base > 4G\n");
+ return -ENODEV;
+ }
apbase = (apbase & 0x7fff) << 25;
diff --git a/drivers/char/agp/sworks-agp.c b/drivers/char/agp/sworks-agp.c
index 268f78d926d3..efef9999f1cf 100644
--- a/drivers/char/agp/sworks-agp.c
+++ b/drivers/char/agp/sworks-agp.c
@@ -468,9 +468,7 @@ static int __devinit agp_serverworks_probe(struct pci_dev *pdev,
switch (pdev->device) {
case 0x0006:
- /* ServerWorks CNB20HE
- Fail silently.*/
- printk (KERN_ERR PFX "Detected ServerWorks CNB20HE chipset: No AGP present.\n");
+ printk (KERN_ERR PFX "ServerWorks CNB20HE is unsupported due to lack of documentation.\n");
return -ENODEV;
case PCI_DEVICE_ID_SERVERWORKS_HE:
diff --git a/drivers/char/drm/i915_irq.c b/drivers/char/drm/i915_irq.c
index a1381c61aa63..d3879ac9970f 100644
--- a/drivers/char/drm/i915_irq.c
+++ b/drivers/char/drm/i915_irq.c
@@ -202,10 +202,15 @@ void i915_driver_irq_postinstall(drm_device_t * dev)
void i915_driver_irq_uninstall(drm_device_t * dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+ u16 temp;
+
if (!dev_priv)
return;
I915_WRITE16(I915REG_HWSTAM, 0xffff);
I915_WRITE16(I915REG_INT_MASK_R, 0xffff);
I915_WRITE16(I915REG_INT_ENABLE_R, 0x0);
+
+ temp = I915_READ16(I915REG_INT_IDENTITY_R);
+ I915_WRITE16(I915REG_INT_IDENTITY_R, temp);
}
diff --git a/drivers/char/drm/r300_cmdbuf.c b/drivers/char/drm/r300_cmdbuf.c
index 291dbf4c8186..c08fa5076f05 100644
--- a/drivers/char/drm/r300_cmdbuf.c
+++ b/drivers/char/drm/r300_cmdbuf.c
@@ -161,6 +161,7 @@ void r300_init_reg_flags(void)
ADD_RANGE(R300_VAP_PVS_CNTL_1, 3);
ADD_RANGE(R300_GB_ENABLE, 1);
ADD_RANGE(R300_GB_MSPOS0, 5);
+ ADD_RANGE(R300_TX_CNTL, 1);
ADD_RANGE(R300_TX_ENABLE, 1);
ADD_RANGE(0x4200, 4);
ADD_RANGE(0x4214, 1);
@@ -489,6 +490,50 @@ static __inline__ int r300_emit_3d_load_vbpntr(drm_radeon_private_t *dev_priv,
return 0;
}
+static __inline__ int r300_emit_bitblt_multi(drm_radeon_private_t *dev_priv,
+ drm_radeon_kcmd_buffer_t *cmdbuf)
+{
+ u32 *cmd = (u32 *) cmdbuf->buf;
+ int count, ret;
+ RING_LOCALS;
+
+ count=(cmd[0]>>16) & 0x3fff;
+
+ if (cmd[0] & 0x8000) {
+ u32 offset;
+
+ if (cmd[1] & (RADEON_GMC_SRC_PITCH_OFFSET_CNTL
+ | RADEON_GMC_DST_PITCH_OFFSET_CNTL)) {
+ offset = cmd[2] << 10;
+ ret = r300_check_offset(dev_priv, offset);
+ if (ret) {
+ DRM_ERROR("Invalid bitblt first offset is %08X\n", offset);
+ return DRM_ERR(EINVAL);
+ }
+ }
+
+ if ((cmd[1] & RADEON_GMC_SRC_PITCH_OFFSET_CNTL) &&
+ (cmd[1] & RADEON_GMC_DST_PITCH_OFFSET_CNTL)) {
+ offset = cmd[3] << 10;
+ ret = r300_check_offset(dev_priv, offset);
+ if (ret) {
+ DRM_ERROR("Invalid bitblt second offset is %08X\n", offset);
+ return DRM_ERR(EINVAL);
+ }
+
+ }
+ }
+
+ BEGIN_RING(count+2);
+ OUT_RING(cmd[0]);
+ OUT_RING_TABLE((int *)(cmdbuf->buf + 4), count + 1);
+ ADVANCE_RING();
+
+ cmdbuf->buf += (count+2)*4;
+ cmdbuf->bufsz -= (count+2)*4;
+
+ return 0;
+}
static __inline__ int r300_emit_raw_packet3(drm_radeon_private_t *dev_priv,
drm_radeon_kcmd_buffer_t *cmdbuf)
@@ -527,6 +572,9 @@ static __inline__ int r300_emit_raw_packet3(drm_radeon_private_t *dev_priv,
case RADEON_3D_LOAD_VBPNTR: /* load vertex array pointers */
return r300_emit_3d_load_vbpntr(dev_priv, cmdbuf, header);
+ case RADEON_CNTL_BITBLT_MULTI:
+ return r300_emit_bitblt_multi(dev_priv, cmdbuf);
+
case RADEON_CP_3D_DRAW_IMMD_2: /* triggers drawing using in-packet vertex data */
case RADEON_CP_3D_DRAW_VBUF_2: /* triggers drawing of vertex buffers setup elsewhere */
case RADEON_CP_3D_DRAW_INDX_2: /* triggers drawing using indices to vertex buffer */
diff --git a/drivers/char/drm/r300_reg.h b/drivers/char/drm/r300_reg.h
index a0ed20e25221..d1e19954406b 100644
--- a/drivers/char/drm/r300_reg.h
+++ b/drivers/char/drm/r300_reg.h
@@ -451,6 +451,9 @@ I am fairly certain that they are correct unless stated otherwise in comments.
/* END */
/* gap */
+/* Zero to flush caches. */
+#define R300_TX_CNTL 0x4100
+
/* The upper enable bits are guessed, based on fglrx reported limits. */
#define R300_TX_ENABLE 0x4104
# define R300_TX_ENABLE_0 (1 << 0)
diff --git a/drivers/char/drm/radeon_drv.h b/drivers/char/drm/radeon_drv.h
index 498b19b1d641..1f7d2ab8c4fc 100644
--- a/drivers/char/drm/radeon_drv.h
+++ b/drivers/char/drm/radeon_drv.h
@@ -90,9 +90,10 @@
* 1.19- Add support for gart table in FB memory and PCIE r300
* 1.20- Add support for r300 texrect
* 1.21- Add support for card type getparam
+ * 1.22- Add support for texture cache flushes (R300_TX_CNTL)
*/
#define DRIVER_MAJOR 1
-#define DRIVER_MINOR 21
+#define DRIVER_MINOR 22
#define DRIVER_PATCHLEVEL 0
/*
diff --git a/drivers/char/sysrq.c b/drivers/char/sysrq.c
index 5765f672e853..d58f82318853 100644
--- a/drivers/char/sysrq.c
+++ b/drivers/char/sysrq.c
@@ -243,7 +243,7 @@ static struct sysrq_key_op sysrq_term_op = {
static void moom_callback(void *ignored)
{
- out_of_memory(GFP_KERNEL, 0);
+ out_of_memory(&NODE_DATA(0)->node_zonelists[ZONE_NORMAL], GFP_KERNEL, 0);
}
static DECLARE_WORK(moom_work, moom_callback, NULL);
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-01 09:29:55 +0000