diff options
Diffstat (limited to 'drivers/char')
| -rw-r--r-- | drivers/char/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/char/hw_random/via-rng.c | 8 | ||||
| -rw-r--r-- | drivers/char/ipmi/bt-bmc.c | 4 | ||||
| -rw-r--r-- | drivers/char/pcmcia/Kconfig | 11 | ||||
| -rw-r--r-- | drivers/char/pcmcia/Makefile | 1 | ||||
| -rw-r--r-- | drivers/char/pcmcia/cm4000_cs.c | 4 | ||||
| -rw-r--r-- | drivers/char/pcmcia/scr24x_cs.c | 373 | ||||
| -rw-r--r-- | drivers/char/pcmcia/synclink_cs.c | 1 | ||||
| -rw-r--r-- | drivers/char/ppdev.c | 39 | ||||
| -rw-r--r-- | drivers/char/snsc.c | 2 | ||||
| -rw-r--r-- | drivers/char/tile-srom.c | 3 |
11 files changed, 423 insertions, 27 deletions
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index dcc09739a54e..fde005ef9d36 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -17,7 +17,6 @@ config DEVMEM config DEVKMEM bool "/dev/kmem virtual device support" - default y help Say Y here if you want to support the /dev/kmem device. The /dev/kmem device is rarely used, but can be used for certain @@ -542,6 +541,7 @@ config HANGCHECK_TIMER config MMTIMER tristate "MMTIMER Memory mapped RTC for SGI Altix" depends on IA64_GENERIC || IA64_SGI_SN2 + depends on POSIX_TIMERS default y help The mmtimer device allows direct userspace access to the @@ -578,7 +578,7 @@ config DEVPORT source "drivers/s390/char/Kconfig" config TILE_SROM - bool "Character-device access via hypervisor to the Tilera SPI ROM" + tristate "Character-device access via hypervisor to the Tilera SPI ROM" depends on TILE default y ---help--- diff --git a/drivers/char/hw_random/via-rng.c b/drivers/char/hw_random/via-rng.c index 44ce80606944..d1f5bb534e0e 100644 --- a/drivers/char/hw_random/via-rng.c +++ b/drivers/char/hw_random/via-rng.c @@ -70,21 +70,17 @@ enum { * until we have 4 bytes, thus returning a u32 at a time, * instead of the current u8-at-a-time. * - * Padlock instructions can generate a spurious DNA fault, so - * we have to call them in the context of irq_ts_save/restore() + * Padlock instructions can generate a spurious DNA fault, but the + * kernel doesn't use CR0.TS, so this doesn't matter. */ static inline u32 xstore(u32 *addr, u32 edx_in) { u32 eax_out; - int ts_state; - - ts_state = irq_ts_save(); asm(".byte 0x0F,0xA7,0xC0 /* xstore %%edi (addr=%0) */" : "=m" (*addr), "=a" (eax_out), "+d" (edx_in), "+D" (addr)); - irq_ts_restore(ts_state); return eax_out; } diff --git a/drivers/char/ipmi/bt-bmc.c b/drivers/char/ipmi/bt-bmc.c index b49e61320952..fc9e8891eae3 100644 --- a/drivers/char/ipmi/bt-bmc.c +++ b/drivers/char/ipmi/bt-bmc.c @@ -484,7 +484,7 @@ static int bt_bmc_remove(struct platform_device *pdev) } static const struct of_device_id bt_bmc_match[] = { - { .compatible = "aspeed,ast2400-bt-bmc" }, + { .compatible = "aspeed,ast2400-ibt-bmc" }, { }, }; @@ -502,4 +502,4 @@ module_platform_driver(bt_bmc_driver); MODULE_DEVICE_TABLE(of, bt_bmc_match); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Alistair Popple <alistair@popple.id.au>"); -MODULE_DESCRIPTION("Linux device interface to the BT interface"); +MODULE_DESCRIPTION("Linux device interface to the IPMI BT interface"); diff --git a/drivers/char/pcmcia/Kconfig b/drivers/char/pcmcia/Kconfig index 8d3dfb0c8a26..1d1e7da8ad27 100644 --- a/drivers/char/pcmcia/Kconfig +++ b/drivers/char/pcmcia/Kconfig @@ -43,6 +43,17 @@ config CARDMAN_4040 (http://www.omnikey.com/), or a current development version of OpenCT (http://www.opensc-project.org/opensc). +config SCR24X + tristate "SCR24x Chip Card Interface support" + depends on PCMCIA + help + Enable support for the SCR24x PCMCIA Chip Card Interface. + + To compile this driver as a module, choose M here. + The module will be called scr24x_cs.. + + If unsure say N. + config IPWIRELESS tristate "IPWireless 3G UMTS PCMCIA card support" depends on PCMCIA && NETDEVICES && TTY diff --git a/drivers/char/pcmcia/Makefile b/drivers/char/pcmcia/Makefile index 0aae20985d57..5b836bc21406 100644 --- a/drivers/char/pcmcia/Makefile +++ b/drivers/char/pcmcia/Makefile @@ -7,3 +7,4 @@ obj-$(CONFIG_SYNCLINK_CS) += synclink_cs.o obj-$(CONFIG_CARDMAN_4000) += cm4000_cs.o obj-$(CONFIG_CARDMAN_4040) += cm4040_cs.o +obj-$(CONFIG_SCR24X) += scr24x_cs.o diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c index c115217c79ae..e051fc8aa7d7 100644 --- a/drivers/char/pcmcia/cm4000_cs.c +++ b/drivers/char/pcmcia/cm4000_cs.c @@ -14,7 +14,7 @@ * (C) 2000,2001,2002,2003,2004 Omnikey AG * * (C) 2005-2006 Harald Welte <laforge@gnumonks.org> - * - Adhere to Kernel CodingStyle + * - Adhere to Kernel process/coding-style.rst * - Port to 2.6.13 "new" style PCMCIA * - Check for copy_{from,to}_user return values * - Use nonseekable_open() @@ -151,7 +151,7 @@ static struct pcmcia_device *dev_table[CM4000_MAX_DEV]; static struct class *cmm_class; /* This table doesn't use spaces after the comma between fields and thus - * violates CodingStyle. However, I don't really think wrapping it around will + * violates process/coding-style.rst. However, I don't really think wrapping it around will * make it any clearer to read -HW */ static unsigned char fi_di_table[10][14] = { /*FI 00 01 02 03 04 05 06 07 08 09 10 11 12 13 */ diff --git a/drivers/char/pcmcia/scr24x_cs.c b/drivers/char/pcmcia/scr24x_cs.c new file mode 100644 index 000000000000..f6b43d9350f0 --- /dev/null +++ b/drivers/char/pcmcia/scr24x_cs.c @@ -0,0 +1,373 @@ +/* + * SCR24x PCMCIA Smart Card Reader Driver + * + * Copyright (C) 2005-2006 TL Sudheendran + * Copyright (C) 2016 Lubomir Rintel + * + * Derived from "scr24x_v4.2.6_Release.tar.gz" driver by TL Sudheendran. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/device.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/cdev.h> +#include <linux/slab.h> +#include <linux/fs.h> +#include <linux/io.h> +#include <linux/uaccess.h> + +#include <pcmcia/cistpl.h> +#include <pcmcia/ds.h> + +#define CCID_HEADER_SIZE 10 +#define CCID_LENGTH_OFFSET 1 +#define CCID_MAX_LEN 271 + +#define SCR24X_DATA(n) (1 + n) +#define SCR24X_CMD_STATUS 7 +#define CMD_START 0x40 +#define CMD_WRITE_BYTE 0x41 +#define CMD_READ_BYTE 0x42 +#define STATUS_BUSY 0x80 + +struct scr24x_dev { + struct device *dev; + struct cdev c_dev; + unsigned char buf[CCID_MAX_LEN]; + int devno; + struct mutex lock; + struct kref refcnt; + u8 __iomem *regs; +}; + +#define SCR24X_DEVS 8 +static DECLARE_BITMAP(scr24x_minors, SCR24X_DEVS); + +static struct class *scr24x_class; +static dev_t scr24x_devt; + +static void scr24x_delete(struct kref *kref) +{ + struct scr24x_dev *dev = container_of(kref, struct scr24x_dev, + refcnt); + + kfree(dev); +} + +static int scr24x_wait_ready(struct scr24x_dev *dev) +{ + u_char status; + int timeout = 100; + + do { + status = ioread8(dev->regs + SCR24X_CMD_STATUS); + if (!(status & STATUS_BUSY)) + return 0; + + msleep(20); + } while (--timeout); + + return -EIO; +} + +static int scr24x_open(struct inode *inode, struct file *filp) +{ + struct scr24x_dev *dev = container_of(inode->i_cdev, + struct scr24x_dev, c_dev); + + kref_get(&dev->refcnt); + filp->private_data = dev; + + return nonseekable_open(inode, filp); +} + +static int scr24x_release(struct inode *inode, struct file *filp) +{ + struct scr24x_dev *dev = filp->private_data; + + /* We must not take the dev->lock here as scr24x_delete() + * might be called to remove the dev structure altogether. + * We don't need the lock anyway, since after the reference + * acquired in probe() is released in remove() the chrdev + * is already unregistered and noone can possibly acquire + * a reference via open() anymore. */ + kref_put(&dev->refcnt, scr24x_delete); + return 0; +} + +static int read_chunk(struct scr24x_dev *dev, size_t offset, size_t limit) +{ + size_t i, y; + int ret; + + for (i = offset; i < limit; i += 5) { + iowrite8(CMD_READ_BYTE, dev->regs + SCR24X_CMD_STATUS); + ret = scr24x_wait_ready(dev); + if (ret < 0) + return ret; + + for (y = 0; y < 5 && i + y < limit; y++) + dev->buf[i + y] = ioread8(dev->regs + SCR24X_DATA(y)); + } + + return 0; +} + +static ssize_t scr24x_read(struct file *filp, char __user *buf, size_t count, + loff_t *ppos) +{ + struct scr24x_dev *dev = filp->private_data; + int ret; + int len; + + if (count < CCID_HEADER_SIZE) + return -EINVAL; + + if (mutex_lock_interruptible(&dev->lock)) + return -ERESTARTSYS; + + if (!dev->dev) { + ret = -ENODEV; + goto out; + } + + ret = scr24x_wait_ready(dev); + if (ret < 0) + goto out; + len = CCID_HEADER_SIZE; + ret = read_chunk(dev, 0, len); + if (ret < 0) + goto out; + + len += le32_to_cpu(*(__le32 *)(&dev->buf[CCID_LENGTH_OFFSET])); + if (len > sizeof(dev->buf)) { + ret = -EIO; + goto out; + } + ret = read_chunk(dev, CCID_HEADER_SIZE, len); + if (ret < 0) + goto out; + + if (len < count) + count = len; + + if (copy_to_user(buf, dev->buf, count)) { + ret = -EFAULT; + goto out; + } + + ret = count; +out: + mutex_unlock(&dev->lock); + return ret; +} + +static ssize_t scr24x_write(struct file *filp, const char __user *buf, + size_t count, loff_t *ppos) +{ + struct scr24x_dev *dev = filp->private_data; + size_t i, y; + int ret; + + if (mutex_lock_interruptible(&dev->lock)) + return -ERESTARTSYS; + + if (!dev->dev) { + ret = -ENODEV; + goto out; + } + + if (count > sizeof(dev->buf)) { + ret = -EINVAL; + goto out; + } + + if (copy_from_user(dev->buf, buf, count)) { + ret = -EFAULT; + goto out; + } + + ret = scr24x_wait_ready(dev); + if (ret < 0) + goto out; + + iowrite8(CMD_START, dev->regs + SCR24X_CMD_STATUS); + ret = scr24x_wait_ready(dev); + if (ret < 0) + goto out; + + for (i = 0; i < count; i += 5) { + for (y = 0; y < 5 && i + y < count; y++) + iowrite8(dev->buf[i + y], dev->regs + SCR24X_DATA(y)); + + iowrite8(CMD_WRITE_BYTE, dev->regs + SCR24X_CMD_STATUS); + ret = scr24x_wait_ready(dev); + if (ret < 0) + goto out; + } + + ret = count; +out: + mutex_unlock(&dev->lock); + return ret; +} + +static const struct file_operations scr24x_fops = { + .owner = THIS_MODULE, + .read = scr24x_read, + .write = scr24x_write, + .open = scr24x_open, + .release = scr24x_release, + .llseek = no_llseek, +}; + +static int scr24x_config_check(struct pcmcia_device *link, void *priv_data) +{ + if (resource_size(link->resource[PCMCIA_IOPORT_0]) != 0x11) + return -ENODEV; + return pcmcia_request_io(link); +} + +static int scr24x_probe(struct pcmcia_device *link) +{ + struct scr24x_dev *dev; + int ret; + + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (!dev) + return -ENOMEM; + + dev->devno = find_first_zero_bit(scr24x_minors, SCR24X_DEVS); + if (dev->devno >= SCR24X_DEVS) { + ret = -EBUSY; + goto err; + } + + mutex_init(&dev->lock); + kref_init(&dev->refcnt); + + link->priv = dev; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + + ret = pcmcia_loop_config(link, scr24x_config_check, NULL); + if (ret < 0) + goto err; + + dev->dev = &link->dev; + dev->regs = devm_ioport_map(&link->dev, + link->resource[PCMCIA_IOPORT_0]->start, + resource_size(link->resource[PCMCIA_IOPORT_0])); + if (!dev->regs) { + ret = -EIO; + goto err; + } + + cdev_init(&dev->c_dev, &scr24x_fops); + dev->c_dev.owner = THIS_MODULE; + dev->c_dev.ops = &scr24x_fops; + ret = cdev_add(&dev->c_dev, MKDEV(MAJOR(scr24x_devt), dev->devno), 1); + if (ret < 0) + goto err; + + ret = pcmcia_enable_device(link); + if (ret < 0) { + pcmcia_disable_device(link); + goto err; + } + + device_create(scr24x_class, NULL, MKDEV(MAJOR(scr24x_devt), dev->devno), + NULL, "scr24x%d", dev->devno); + + dev_info(&link->dev, "SCR24x Chip Card Interface\n"); + return 0; + +err: + if (dev->devno < SCR24X_DEVS) + clear_bit(dev->devno, scr24x_minors); + kfree (dev); + return ret; +} + +static void scr24x_remove(struct pcmcia_device *link) +{ + struct scr24x_dev *dev = (struct scr24x_dev *)link->priv; + + device_destroy(scr24x_class, MKDEV(MAJOR(scr24x_devt), dev->devno)); + mutex_lock(&dev->lock); + pcmcia_disable_device(link); + cdev_del(&dev->c_dev); + clear_bit(dev->devno, scr24x_minors); + dev->dev = NULL; + mutex_unlock(&dev->lock); + + kref_put(&dev->refcnt, scr24x_delete); +} + +static const struct pcmcia_device_id scr24x_ids[] = { + PCMCIA_DEVICE_PROD_ID12("HP", "PC Card Smart Card Reader", + 0x53cb94f9, 0xbfdf89a5), + PCMCIA_DEVICE_PROD_ID1("SCR241 PCMCIA", 0x6271efa3), + PCMCIA_DEVICE_PROD_ID1("SCR243 PCMCIA", 0x2054e8de), + PCMCIA_DEVICE_PROD_ID1("SCR24x PCMCIA", 0x54a33665), + PCMCIA_DEVICE_NULL +}; +MODULE_DEVICE_TABLE(pcmcia, scr24x_ids); + +static struct pcmcia_driver scr24x_driver = { + .owner = THIS_MODULE, + .name = "scr24x_cs", + .probe = scr24x_probe, + .remove = scr24x_remove, + .id_table = scr24x_ids, +}; + +static int __init scr24x_init(void) +{ + int ret; + + scr24x_class = class_create(THIS_MODULE, "scr24x"); + if (IS_ERR(scr24x_class)) + return PTR_ERR(scr24x_class); + + ret = alloc_chrdev_region(&scr24x_devt, 0, SCR24X_DEVS, "scr24x"); + if (ret < 0) { + class_destroy(scr24x_class); + return ret; + } + + ret = pcmcia_register_driver(&scr24x_driver); + if (ret < 0) { + unregister_chrdev_region(scr24x_devt, SCR24X_DEVS); + class_destroy(scr24x_class); + } + + return ret; +} + +static void __exit scr24x_exit(void) +{ + pcmcia_unregister_driver(&scr24x_driver); + unregister_chrdev_region(scr24x_devt, SCR24X_DEVS); + class_destroy(scr24x_class); +} + +module_init(scr24x_init); +module_exit(scr24x_exit); + +MODULE_AUTHOR("Lubomir Rintel"); +MODULE_DESCRIPTION("SCR24x PCMCIA Smart Card Reader Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index d28922df01d7..a7dd5f4f2c5a 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -4248,7 +4248,6 @@ static void hdlcdev_rx(MGSLPC_INFO *info, char *buf, int size) static const struct net_device_ops hdlcdev_ops = { .ndo_open = hdlcdev_open, .ndo_stop = hdlcdev_close, - .ndo_change_mtu = hdlc_change_mtu, .ndo_start_xmit = hdlc_start_xmit, .ndo_do_ioctl = hdlcdev_ioctl, .ndo_tx_timeout = hdlcdev_tx_timeout, diff --git a/drivers/char/ppdev.c b/drivers/char/ppdev.c index d23368874710..02819e0703c8 100644 --- a/drivers/char/ppdev.c +++ b/drivers/char/ppdev.c @@ -86,6 +86,9 @@ struct pp_struct { long default_inactivity; }; +/* should we use PARDEVICE_MAX here? */ +static struct device *devices[PARPORT_MAX]; + /* pp_struct.flags bitfields */ #define PP_CLAIMED (1<<0) #define PP_EXCL (1<<1) @@ -294,7 +297,7 @@ static int register_device(int minor, struct pp_struct *pp) port = parport_find_number(minor); if (!port) { - printk(KERN_WARNING "%s: no associated port!\n", name); + pr_warn("%s: no associated port!\n", name); kfree(name); return -ENXIO; } @@ -305,10 +308,10 @@ static int register_device(int minor, struct pp_struct *pp) ppdev_cb.private = pp; pdev = parport_register_dev_model(port, name, &ppdev_cb, minor); parport_put_port(port); + kfree(name); if (!pdev) { - printk(KERN_WARNING "%s: failed to register device!\n", name); - kfree(name); + pr_warn("%s: failed to register device!\n", name); return -ENXIO; } @@ -748,10 +751,7 @@ static int pp_release(struct inode *inode, struct file *file) } if (pp->pdev) { - const char *name = pp->pdev->name; - parport_unregister_device(pp->pdev); - kfree(name); pp->pdev = NULL; pr_debug(CHRDEV "%x: unregistered pardevice\n", minor); } @@ -792,13 +792,29 @@ static const struct file_operations pp_fops = { static void pp_attach(struct parport *port) { - device_create(ppdev_class, port->dev, MKDEV(PP_MAJOR, port->number), - NULL, "parport%d", port->number); + struct device *ret; + + if (devices[port->number]) + return; + + ret = device_create(ppdev_class, port->dev, + MKDEV(PP_MAJOR, port->number), NULL, + "parport%d", port->number); + if (IS_ERR(ret)) { + pr_err("Failed to create device parport%d\n", + port->number); + return; + } + devices[port->number] = ret; } static void pp_detach(struct parport *port) { + if (!devices[port->number]) + return; + device_destroy(ppdev_class, MKDEV(PP_MAJOR, port->number)); + devices[port->number] = NULL; } static int pp_probe(struct pardevice *par_dev) @@ -825,8 +841,7 @@ static int __init ppdev_init(void) int err = 0; if (register_chrdev(PP_MAJOR, CHRDEV, &pp_fops)) { - printk(KERN_WARNING CHRDEV ": unable to get major %d\n", - PP_MAJOR); + pr_warn(CHRDEV ": unable to get major %d\n", PP_MAJOR); return -EIO; } ppdev_class = class_create(THIS_MODULE, CHRDEV); @@ -836,11 +851,11 @@ static int __init ppdev_init(void) } err = parport_register_driver(&pp_driver); if (err < 0) { - printk(KERN_WARNING CHRDEV ": unable to register with parport\n"); + pr_warn(CHRDEV ": unable to register with parport\n"); goto out_class; } - printk(KERN_INFO PP_VERSION "\n"); + pr_info(PP_VERSION "\n"); goto out; out_class: diff --git a/drivers/char/snsc.c b/drivers/char/snsc.c index 10e56323f390..ec07f0e99732 100644 --- a/drivers/char/snsc.c +++ b/drivers/char/snsc.c @@ -285,7 +285,7 @@ scdrv_write(struct file *file, const char __user *buf, DECLARE_WAITQUEUE(wait, current); if (file->f_flags & O_NONBLOCK) { - spin_unlock(&sd->sd_wlock); + spin_unlock_irqrestore(&sd->sd_wlock, flags); up(&sd->sd_wbs); return -EAGAIN; } diff --git a/drivers/char/tile-srom.c b/drivers/char/tile-srom.c index 398800edb2cc..3d4cca64b2d4 100644 --- a/drivers/char/tile-srom.c +++ b/drivers/char/tile-srom.c @@ -312,7 +312,8 @@ ATTRIBUTE_GROUPS(srom_dev); static char *srom_devnode(struct device *dev, umode_t *mode) { - *mode = S_IRUGO | S_IWUSR; + if (mode) + *mode = 0644; return kasprintf(GFP_KERNEL, "srom/%s", dev_name(dev)); } |