diff options
Diffstat (limited to 'drivers/clocksource')
| -rw-r--r-- | drivers/clocksource/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/clocksource/Makefile | 1 | ||||
| -rw-r--r-- | drivers/clocksource/timer-gemini.c | 277 |
3 files changed, 288 insertions, 0 deletions
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 3dc06f0d2a53..afef0e8b3985 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -67,6 +67,16 @@ config DW_APB_TIMER_OF select DW_APB_TIMER select CLKSRC_OF +config GEMINI_TIMER + bool "Cortina Gemini timer driver" if COMPILE_TEST + depends on GENERIC_CLOCKEVENTS + depends on HAS_IOMEM + select CLKSRC_MMIO + select CLKSRC_OF + select MFD_SYSCON + help + Enables support for the Gemini timer + config ROCKCHIP_TIMER bool "Rockchip timer driver" if COMPILE_TEST depends on ARM || ARM64 diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index 4b7e9a279c3f..dbbee80fb8de 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_CLKSRC_MMIO) += mmio.o obj-$(CONFIG_DIGICOLOR_TIMER) += timer-digicolor.o obj-$(CONFIG_DW_APB_TIMER) += dw_apb_timer.o obj-$(CONFIG_DW_APB_TIMER_OF) += dw_apb_timer_of.o +obj-$(CONFIG_GEMINI_TIMER) += timer-gemini.o obj-$(CONFIG_ROCKCHIP_TIMER) += rockchip_timer.o obj-$(CONFIG_CLKSRC_NOMADIK_MTU) += nomadik-mtu.o obj-$(CONFIG_CLKSRC_DBX500_PRCMU) += clksrc-dbx500-prcmu.o diff --git a/drivers/clocksource/timer-gemini.c b/drivers/clocksource/timer-gemini.c new file mode 100644 index 000000000000..dda27b7bf1a1 --- /dev/null +++ b/drivers/clocksource/timer-gemini.c @@ -0,0 +1,277 @@ +/* + * Gemini timer driver + * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org> + * + * Based on a rewrite of arch/arm/mach-gemini/timer.c: + * Copyright (C) 2001-2006 Storlink, Corp. + * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> + */ +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/mfd/syscon.h> +#include <linux/regmap.h> +#include <linux/clockchips.h> +#include <linux/clocksource.h> +#include <linux/sched_clock.h> + +/* + * Relevant registers in the global syscon + */ +#define GLOBAL_STATUS 0x04 +#define CPU_AHB_RATIO_MASK (0x3 << 18) +#define CPU_AHB_1_1 (0x0 << 18) +#define CPU_AHB_3_2 (0x1 << 18) +#define CPU_AHB_24_13 (0x2 << 18) +#define CPU_AHB_2_1 (0x3 << 18) +#define REG_TO_AHB_SPEED(reg) ((((reg) >> 15) & 0x7) * 10 + 130) + +/* + * Register definitions for the timers + */ +#define TIMER1_COUNT (0x00) +#define TIMER1_LOAD (0x04) +#define TIMER1_MATCH1 (0x08) +#define TIMER1_MATCH2 (0x0c) +#define TIMER2_COUNT (0x10) +#define TIMER2_LOAD (0x14) +#define TIMER2_MATCH1 (0x18) +#define TIMER2_MATCH2 (0x1c) +#define TIMER3_COUNT (0x20) +#define TIMER3_LOAD (0x24) +#define TIMER3_MATCH1 (0x28) +#define TIMER3_MATCH2 (0x2c) +#define TIMER_CR (0x30) +#define TIMER_INTR_STATE (0x34) +#define TIMER_INTR_MASK (0x38) + +#define TIMER_1_CR_ENABLE (1 << 0) +#define TIMER_1_CR_CLOCK (1 << 1) +#define TIMER_1_CR_INT (1 << 2) +#define TIMER_2_CR_ENABLE (1 << 3) +#define TIMER_2_CR_CLOCK (1 << 4) +#define TIMER_2_CR_INT (1 << 5) +#define TIMER_3_CR_ENABLE (1 << 6) +#define TIMER_3_CR_CLOCK (1 << 7) +#define TIMER_3_CR_INT (1 << 8) +#define TIMER_1_CR_UPDOWN (1 << 9) +#define TIMER_2_CR_UPDOWN (1 << 10) +#define TIMER_3_CR_UPDOWN (1 << 11) +#define TIMER_DEFAULT_FLAGS (TIMER_1_CR_UPDOWN | \ + TIMER_3_CR_ENABLE | \ + TIMER_3_CR_UPDOWN) + +#define TIMER_1_INT_MATCH1 (1 << 0) +#define TIMER_1_INT_MATCH2 (1 << 1) +#define TIMER_1_INT_OVERFLOW (1 << 2) +#define TIMER_2_INT_MATCH1 (1 << 3) +#define TIMER_2_INT_MATCH2 (1 << 4) +#define TIMER_2_INT_OVERFLOW (1 << 5) +#define TIMER_3_INT_MATCH1 (1 << 6) +#define TIMER_3_INT_MATCH2 (1 << 7) +#define TIMER_3_INT_OVERFLOW (1 << 8) +#define TIMER_INT_ALL_MASK 0x1ff + +static unsigned int tick_rate; +static void __iomem *base; + +static u64 notrace gemini_read_sched_clock(void) +{ + return readl(base + TIMER3_COUNT); +} + +static int gemini_timer_set_next_event(unsigned long cycles, + struct clock_event_device *evt) +{ + u32 cr; + + /* Setup the match register */ + cr = readl(base + TIMER1_COUNT); + writel(cr + cycles, base + TIMER1_MATCH1); + if (readl(base + TIMER1_COUNT) - cr > cycles) + return -ETIME; + + return 0; +} + +static int gemini_timer_shutdown(struct clock_event_device *evt) +{ + u32 cr; + + /* + * Disable also for oneshot: the set_next() call will arm the timer + * instead. + */ + /* Stop timer and interrupt. */ + cr = readl(base + TIMER_CR); + cr &= ~(TIMER_1_CR_ENABLE | TIMER_1_CR_INT); + writel(cr, base + TIMER_CR); + + /* Setup counter start from 0 */ + writel(0, base + TIMER1_COUNT); + writel(0, base + TIMER1_LOAD); + + /* enable interrupt */ + cr = readl(base + TIMER_INTR_MASK); + cr &= ~(TIMER_1_INT_OVERFLOW | TIMER_1_INT_MATCH2); + cr |= TIMER_1_INT_MATCH1; + writel(cr, base + TIMER_INTR_MASK); + + /* start the timer */ + cr = readl(base + TIMER_CR); + cr |= TIMER_1_CR_ENABLE; + writel(cr, base + TIMER_CR); + + return 0; +} + +static int gemini_timer_set_periodic(struct clock_event_device *evt) +{ + u32 period = DIV_ROUND_CLOSEST(tick_rate, HZ); + u32 cr; + + /* Stop timer and interrupt */ + cr = readl(base + TIMER_CR); + cr &= ~(TIMER_1_CR_ENABLE | TIMER_1_CR_INT); + writel(cr, base + TIMER_CR); + + /* Setup timer to fire at 1/HT intervals. */ + cr = 0xffffffff - (period - 1); + writel(cr, base + TIMER1_COUNT); + writel(cr, base + TIMER1_LOAD); + + /* enable interrupt on overflow */ + cr = readl(base + TIMER_INTR_MASK); + cr &= ~(TIMER_1_INT_MATCH1 | TIMER_1_INT_MATCH2); + cr |= TIMER_1_INT_OVERFLOW; + writel(cr, base + TIMER_INTR_MASK); + + /* Start the timer */ + cr = readl(base + TIMER_CR); + cr |= TIMER_1_CR_ENABLE; + cr |= TIMER_1_CR_INT; + writel(cr, base + TIMER_CR); + + return 0; +} + +/* Use TIMER1 as clock event */ +static struct clock_event_device gemini_clockevent = { + .name = "TIMER1", + /* Reasonably fast and accurate clock event */ + .rating = 300, + .shift = 32, + .features = CLOCK_EVT_FEAT_PERIODIC | + CLOCK_EVT_FEAT_ONESHOT, + .set_next_event = gemini_timer_set_next_event, + .set_state_shutdown = gemini_timer_shutdown, + .set_state_periodic = gemini_timer_set_periodic, + .set_state_oneshot = gemini_timer_shutdown, + .tick_resume = gemini_timer_shutdown, +}; + +/* + * IRQ handler for the timer + */ +static irqreturn_t gemini_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = &gemini_clockevent; + + evt->event_handler(evt); + return IRQ_HANDLED; +} + +static struct irqaction gemini_timer_irq = { + .name = "Gemini Timer Tick", + .flags = IRQF_TIMER, + .handler = gemini_timer_interrupt, +}; + +static int __init gemini_timer_of_init(struct device_node *np) +{ + static struct regmap *map; + int irq; + int ret; + u32 val; + + map = syscon_regmap_lookup_by_phandle(np, "syscon"); + if (IS_ERR(map)) { + pr_err("Can't get regmap for syscon handle"); + return -ENODEV; + } + ret = regmap_read(map, GLOBAL_STATUS, &val); + if (ret) { + pr_err("Can't read syscon status register"); + return -ENXIO; + } + + base = of_iomap(np, 0); + if (!base) { + pr_err("Can't remap registers"); + return -ENXIO; + } + /* IRQ for timer 1 */ + irq = irq_of_parse_and_map(np, 0); + if (irq <= 0) { + pr_err("Can't parse IRQ"); + return -EINVAL; + } + + tick_rate = REG_TO_AHB_SPEED(val) * 1000000; + printk(KERN_INFO "Bus: %dMHz", tick_rate / 1000000); + + tick_rate /= 6; /* APB bus run AHB*(1/6) */ + + switch (val & CPU_AHB_RATIO_MASK) { + case CPU_AHB_1_1: + printk(KERN_CONT "(1/1)\n"); + break; + case CPU_AHB_3_2: + printk(KERN_CONT "(3/2)\n"); + break; + case CPU_AHB_24_13: + printk(KERN_CONT "(24/13)\n"); + break; + case CPU_AHB_2_1: + printk(KERN_CONT "(2/1)\n"); + break; + } + + /* + * Reset the interrupt mask and status + */ + writel(TIMER_INT_ALL_MASK, base + TIMER_INTR_MASK); + writel(0, base + TIMER_INTR_STATE); + writel(TIMER_DEFAULT_FLAGS, base + TIMER_CR); + + /* + * Setup free-running clocksource timer (interrupts + * disabled.) + */ + writel(0, base + TIMER3_COUNT); + writel(0, base + TIMER3_LOAD); + writel(0, base + TIMER3_MATCH1); + writel(0, base + TIMER3_MATCH2); + clocksource_mmio_init(base + TIMER3_COUNT, + "gemini_clocksource", tick_rate, + 300, 32, clocksource_mmio_readl_up); + sched_clock_register(gemini_read_sched_clock, 32, tick_rate); + + /* + * Setup clockevent timer (interrupt-driven.) + */ + writel(0, base + TIMER1_COUNT); + writel(0, base + TIMER1_LOAD); + writel(0, base + TIMER1_MATCH1); + writel(0, base + TIMER1_MATCH2); + setup_irq(irq, &gemini_timer_irq); + gemini_clockevent.cpumask = cpumask_of(0); + clockevents_config_and_register(&gemini_clockevent, tick_rate, + 1, 0xffffffff); + + return 0; +} +CLOCKSOURCE_OF_DECLARE(nomadik_mtu, "cortina,gemini-timer", + gemini_timer_of_init); |