summaryrefslogtreecommitdiffstats
path: root/drivers/cpufreq/exynos4210-cpufreq.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/cpufreq/exynos4210-cpufreq.c')
-rw-r--r--drivers/cpufreq/exynos4210-cpufreq.c385
1 files changed, 72 insertions, 313 deletions
diff --git a/drivers/cpufreq/exynos4210-cpufreq.c b/drivers/cpufreq/exynos4210-cpufreq.c
index a0af2d4448a9..6bc4ada56df1 100644
--- a/drivers/cpufreq/exynos4210-cpufreq.c
+++ b/drivers/cpufreq/exynos4210-cpufreq.c
@@ -2,7 +2,7 @@
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
- * EXYNOS4 - CPU frequency scaling support
+ * EXYNOS4210 - CPU frequency scaling support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -23,10 +23,16 @@
#include <mach/map.h>
#include <mach/regs-clock.h>
#include <mach/regs-mem.h>
+#include <mach/cpufreq.h>
#include <plat/clock.h>
#include <plat/pm.h>
+#define CPUFREQ_LEVEL_END L5
+
+static int max_support_idx = L0;
+static int min_support_idx = (CPUFREQ_LEVEL_END - 1);
+
static struct clk *cpu_clk;
static struct clk *moutcore;
static struct clk *mout_mpll;
@@ -37,20 +43,18 @@ static struct regulator *arm_regulator;
static struct cpufreq_freqs freqs;
struct cpufreq_clkdiv {
+ unsigned int index;
unsigned int clkdiv;
};
-static unsigned int locking_frequency;
-static bool frequency_locked;
-static DEFINE_MUTEX(cpufreq_lock);
-
-enum cpufreq_level_index {
- L0, L1, L2, L3, L4, CPUFREQ_LEVEL_END,
+static unsigned int exynos4210_volt_table[CPUFREQ_LEVEL_END] = {
+ 1250000, 1150000, 1050000, 975000, 950000,
};
-static struct cpufreq_clkdiv exynos4_clkdiv_table[CPUFREQ_LEVEL_END];
-static struct cpufreq_frequency_table exynos4_freq_table[] = {
+static struct cpufreq_clkdiv exynos4210_clkdiv_table[CPUFREQ_LEVEL_END];
+
+static struct cpufreq_frequency_table exynos4210_freq_table[] = {
{L0, 1200*1000},
{L1, 1000*1000},
{L2, 800*1000},
@@ -104,31 +108,7 @@ static unsigned int clkdiv_cpu1[CPUFREQ_LEVEL_END][2] = {
{ 3, 0 },
};
-struct cpufreq_voltage_table {
- unsigned int index; /* any */
- unsigned int arm_volt; /* uV */
-};
-
-static struct cpufreq_voltage_table exynos4_volt_table[CPUFREQ_LEVEL_END] = {
- {
- .index = L0,
- .arm_volt = 1350000,
- }, {
- .index = L1,
- .arm_volt = 1300000,
- }, {
- .index = L2,
- .arm_volt = 1200000,
- }, {
- .index = L3,
- .arm_volt = 1100000,
- }, {
- .index = L4,
- .arm_volt = 1050000,
- },
-};
-
-static unsigned int exynos4_apll_pms_table[CPUFREQ_LEVEL_END] = {
+static unsigned int exynos4210_apll_pms_table[CPUFREQ_LEVEL_END] = {
/* APLL FOUT L0: 1200MHz */
((150 << 16) | (3 << 8) | 1),
@@ -145,23 +125,13 @@ static unsigned int exynos4_apll_pms_table[CPUFREQ_LEVEL_END] = {
((200 << 16) | (6 << 8) | 3),
};
-static int exynos4_verify_speed(struct cpufreq_policy *policy)
-{
- return cpufreq_frequency_table_verify(policy, exynos4_freq_table);
-}
-
-static unsigned int exynos4_getspeed(unsigned int cpu)
-{
- return clk_get_rate(cpu_clk) / 1000;
-}
-
-static void exynos4_set_clkdiv(unsigned int div_index)
+static void exynos4210_set_clkdiv(unsigned int div_index)
{
unsigned int tmp;
/* Change Divider - CPU0 */
- tmp = exynos4_clkdiv_table[div_index].clkdiv;
+ tmp = exynos4210_clkdiv_table[div_index].clkdiv;
__raw_writel(tmp, S5P_CLKDIV_CPU);
@@ -185,7 +155,7 @@ static void exynos4_set_clkdiv(unsigned int div_index)
} while (tmp & 0x11);
}
-static void exynos4_set_apll(unsigned int index)
+static void exynos4210_set_apll(unsigned int index)
{
unsigned int tmp;
@@ -204,7 +174,7 @@ static void exynos4_set_apll(unsigned int index)
/* 3. Change PLL PMS values */
tmp = __raw_readl(S5P_APLL_CON0);
tmp &= ~((0x3ff << 16) | (0x3f << 8) | (0x7 << 0));
- tmp |= exynos4_apll_pms_table[index];
+ tmp |= exynos4210_apll_pms_table[index];
__raw_writel(tmp, S5P_APLL_CON0);
/* 4. wait_lock_time */
@@ -221,305 +191,90 @@ static void exynos4_set_apll(unsigned int index)
} while (tmp != (0x1 << S5P_CLKSRC_CPU_MUXCORE_SHIFT));
}
-static void exynos4_set_frequency(unsigned int old_index, unsigned int new_index)
+bool exynos4210_pms_change(unsigned int old_index, unsigned int new_index)
+{
+ unsigned int old_pm = (exynos4210_apll_pms_table[old_index] >> 8);
+ unsigned int new_pm = (exynos4210_apll_pms_table[new_index] >> 8);
+
+ return (old_pm == new_pm) ? 0 : 1;
+}
+
+static void exynos4210_set_frequency(unsigned int old_index,
+ unsigned int new_index)
{
unsigned int tmp;
if (old_index > new_index) {
- /*
- * L1/L3, L2/L4 Level change require
- * to only change s divider value
- */
- if (((old_index == L3) && (new_index == L1)) ||
- ((old_index == L4) && (new_index == L2))) {
+ if (!exynos4210_pms_change(old_index, new_index)) {
/* 1. Change the system clock divider values */
- exynos4_set_clkdiv(new_index);
+ exynos4210_set_clkdiv(new_index);
/* 2. Change just s value in apll m,p,s value */
tmp = __raw_readl(S5P_APLL_CON0);
tmp &= ~(0x7 << 0);
- tmp |= (exynos4_apll_pms_table[new_index] & 0x7);
+ tmp |= (exynos4210_apll_pms_table[new_index] & 0x7);
__raw_writel(tmp, S5P_APLL_CON0);
} else {
/* Clock Configuration Procedure */
/* 1. Change the system clock divider values */
- exynos4_set_clkdiv(new_index);
+ exynos4210_set_clkdiv(new_index);
/* 2. Change the apll m,p,s value */
- exynos4_set_apll(new_index);
+ exynos4210_set_apll(new_index);
}
} else if (old_index < new_index) {
- /*
- * L1/L3, L2/L4 Level change require
- * to only change s divider value
- */
- if (((old_index == L1) && (new_index == L3)) ||
- ((old_index == L2) && (new_index == L4))) {
+ if (!exynos4210_pms_change(old_index, new_index)) {
/* 1. Change just s value in apll m,p,s value */
tmp = __raw_readl(S5P_APLL_CON0);
tmp &= ~(0x7 << 0);
- tmp |= (exynos4_apll_pms_table[new_index] & 0x7);
+ tmp |= (exynos4210_apll_pms_table[new_index] & 0x7);
__raw_writel(tmp, S5P_APLL_CON0);
/* 2. Change the system clock divider values */
- exynos4_set_clkdiv(new_index);
+ exynos4210_set_clkdiv(new_index);
} else {
/* Clock Configuration Procedure */
/* 1. Change the apll m,p,s value */
- exynos4_set_apll(new_index);
+ exynos4210_set_apll(new_index);
/* 2. Change the system clock divider values */
- exynos4_set_clkdiv(new_index);
+ exynos4210_set_clkdiv(new_index);
}
}
}
-static int exynos4_target(struct cpufreq_policy *policy,
- unsigned int target_freq,
- unsigned int relation)
-{
- unsigned int index, old_index;
- unsigned int arm_volt;
- int err = -EINVAL;
-
- freqs.old = exynos4_getspeed(policy->cpu);
-
- mutex_lock(&cpufreq_lock);
-
- if (frequency_locked && target_freq != locking_frequency) {
- err = -EAGAIN;
- goto out;
- }
-
- if (cpufreq_frequency_table_target(policy, exynos4_freq_table,
- freqs.old, relation, &old_index))
- goto out;
-
- if (cpufreq_frequency_table_target(policy, exynos4_freq_table,
- target_freq, relation, &index))
- goto out;
-
- err = 0;
-
- freqs.new = exynos4_freq_table[index].frequency;
- freqs.cpu = policy->cpu;
-
- if (freqs.new == freqs.old)
- goto out;
-
- /* get the voltage value */
- arm_volt = exynos4_volt_table[index].arm_volt;
-
- cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
- /* control regulator */
- if (freqs.new > freqs.old) {
- /* Voltage up */
- regulator_set_voltage(arm_regulator, arm_volt, arm_volt);
- }
-
- /* Clock Configuration Procedure */
- exynos4_set_frequency(old_index, index);
-
- cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
- /* control regulator */
- if (freqs.new < freqs.old) {
- /* Voltage down */
- regulator_set_voltage(arm_regulator, arm_volt, arm_volt);
- }
-
-out:
- mutex_unlock(&cpufreq_lock);
- return err;
-}
-
-#ifdef CONFIG_PM
-/*
- * These suspend/resume are used as syscore_ops, it is already too
- * late to set regulator voltages at this stage.
- */
-static int exynos4_cpufreq_suspend(struct cpufreq_policy *policy)
-{
- return 0;
-}
-
-static int exynos4_cpufreq_resume(struct cpufreq_policy *policy)
-{
- return 0;
-}
-#endif
-
-/**
- * exynos4_cpufreq_pm_notifier - block CPUFREQ's activities in suspend-resume
- * context
- * @notifier
- * @pm_event
- * @v
- *
- * While frequency_locked == true, target() ignores every frequency but
- * locking_frequency. The locking_frequency value is the initial frequency,
- * which is set by the bootloader. In order to eliminate possible
- * inconsistency in clock values, we save and restore frequencies during
- * suspend and resume and block CPUFREQ activities. Note that the standard
- * suspend/resume cannot be used as they are too deep (syscore_ops) for
- * regulator actions.
- */
-static int exynos4_cpufreq_pm_notifier(struct notifier_block *notifier,
- unsigned long pm_event, void *v)
-{
- struct cpufreq_policy *policy = cpufreq_cpu_get(0); /* boot CPU */
- static unsigned int saved_frequency;
- unsigned int temp;
-
- mutex_lock(&cpufreq_lock);
- switch (pm_event) {
- case PM_SUSPEND_PREPARE:
- if (frequency_locked)
- goto out;
- frequency_locked = true;
-
- if (locking_frequency) {
- saved_frequency = exynos4_getspeed(0);
-
- mutex_unlock(&cpufreq_lock);
- exynos4_target(policy, locking_frequency,
- CPUFREQ_RELATION_H);
- mutex_lock(&cpufreq_lock);
- }
-
- break;
- case PM_POST_SUSPEND:
-
- if (saved_frequency) {
- /*
- * While frequency_locked, only locking_frequency
- * is valid for target(). In order to use
- * saved_frequency while keeping frequency_locked,
- * we temporarly overwrite locking_frequency.
- */
- temp = locking_frequency;
- locking_frequency = saved_frequency;
-
- mutex_unlock(&cpufreq_lock);
- exynos4_target(policy, locking_frequency,
- CPUFREQ_RELATION_H);
- mutex_lock(&cpufreq_lock);
-
- locking_frequency = temp;
- }
-
- frequency_locked = false;
- break;
- }
-out:
- mutex_unlock(&cpufreq_lock);
-
- return NOTIFY_OK;
-}
-
-static struct notifier_block exynos4_cpufreq_nb = {
- .notifier_call = exynos4_cpufreq_pm_notifier,
-};
-
-static int exynos4_cpufreq_cpu_init(struct cpufreq_policy *policy)
-{
- int ret;
-
- policy->cur = policy->min = policy->max = exynos4_getspeed(policy->cpu);
-
- cpufreq_frequency_table_get_attr(exynos4_freq_table, policy->cpu);
-
- /* set the transition latency value */
- policy->cpuinfo.transition_latency = 100000;
-
- /*
- * EXYNOS4 multi-core processors has 2 cores
- * that the frequency cannot be set independently.
- * Each cpu is bound to the same speed.
- * So the affected cpu is all of the cpus.
- */
- if (!cpu_online(1)) {
- cpumask_copy(policy->related_cpus, cpu_possible_mask);
- cpumask_copy(policy->cpus, cpu_online_mask);
- } else {
- cpumask_setall(policy->cpus);
- }
-
- ret = cpufreq_frequency_table_cpuinfo(policy, exynos4_freq_table);
- if (ret)
- return ret;
-
- cpufreq_frequency_table_get_attr(exynos4_freq_table, policy->cpu);
-
- return 0;
-}
-
-static int exynos4_cpufreq_cpu_exit(struct cpufreq_policy *policy)
-{
- cpufreq_frequency_table_put_attr(policy->cpu);
- return 0;
-}
-
-static struct freq_attr *exynos4_cpufreq_attr[] = {
- &cpufreq_freq_attr_scaling_available_freqs,
- NULL,
-};
-
-static struct cpufreq_driver exynos4_driver = {
- .flags = CPUFREQ_STICKY,
- .verify = exynos4_verify_speed,
- .target = exynos4_target,
- .get = exynos4_getspeed,
- .init = exynos4_cpufreq_cpu_init,
- .exit = exynos4_cpufreq_cpu_exit,
- .name = "exynos4_cpufreq",
- .attr = exynos4_cpufreq_attr,
-#ifdef CONFIG_PM
- .suspend = exynos4_cpufreq_suspend,
- .resume = exynos4_cpufreq_resume,
-#endif
-};
-
-static int __init exynos4_cpufreq_init(void)
+int exynos4210_cpufreq_init(struct exynos_dvfs_info *info)
{
int i;
unsigned int tmp;
+ unsigned long rate;
cpu_clk = clk_get(NULL, "armclk");
if (IS_ERR(cpu_clk))
return PTR_ERR(cpu_clk);
- locking_frequency = exynos4_getspeed(0);
-
moutcore = clk_get(NULL, "moutcore");
if (IS_ERR(moutcore))
- goto out;
+ goto err_moutcore;
mout_mpll = clk_get(NULL, "mout_mpll");
if (IS_ERR(mout_mpll))
- goto out;
+ goto err_mout_mpll;
+
+ rate = clk_get_rate(mout_mpll) / 1000;
mout_apll = clk_get(NULL, "mout_apll");
if (IS_ERR(mout_apll))
- goto out;
-
- arm_regulator = regulator_get(NULL, "vdd_arm");
- if (IS_ERR(arm_regulator)) {
- printk(KERN_ERR "failed to get resource %s\n", "vdd_arm");
- goto out;
- }
-
- register_pm_notifier(&exynos4_cpufreq_nb);
+ goto err_mout_apll;
tmp = __raw_readl(S5P_CLKDIV_CPU);
for (i = L0; i < CPUFREQ_LEVEL_END; i++) {
tmp &= ~(S5P_CLKDIV_CPU0_CORE_MASK |
- S5P_CLKDIV_CPU0_COREM0_MASK |
- S5P_CLKDIV_CPU0_COREM1_MASK |
- S5P_CLKDIV_CPU0_PERIPH_MASK |
- S5P_CLKDIV_CPU0_ATB_MASK |
- S5P_CLKDIV_CPU0_PCLKDBG_MASK |
- S5P_CLKDIV_CPU0_APLL_MASK);
+ S5P_CLKDIV_CPU0_COREM0_MASK |
+ S5P_CLKDIV_CPU0_COREM1_MASK |
+ S5P_CLKDIV_CPU0_PERIPH_MASK |
+ S5P_CLKDIV_CPU0_ATB_MASK |
+ S5P_CLKDIV_CPU0_PCLKDBG_MASK |
+ S5P_CLKDIV_CPU0_APLL_MASK);
tmp |= ((clkdiv_cpu0[i][0] << S5P_CLKDIV_CPU0_CORE_SHIFT) |
(clkdiv_cpu0[i][1] << S5P_CLKDIV_CPU0_COREM0_SHIFT) |
@@ -529,29 +284,33 @@ static int __init exynos4_cpufreq_init(void)
(clkdiv_cpu0[i][5] << S5P_CLKDIV_CPU0_PCLKDBG_SHIFT) |
(clkdiv_cpu0[i][6] << S5P_CLKDIV_CPU0_APLL_SHIFT));
- exynos4_clkdiv_table[i].clkdiv = tmp;
+ exynos4210_clkdiv_table[i].clkdiv = tmp;
}
- return cpufreq_register_driver(&exynos4_driver);
-
-out:
- if (!IS_ERR(cpu_clk))
- clk_put(cpu_clk);
+ info->mpll_freq_khz = rate;
+ info->pm_lock_idx = L2;
+ info->pll_safe_idx = L2;
+ info->max_support_idx = max_support_idx;
+ info->min_support_idx = min_support_idx;
+ info->cpu_clk = cpu_clk;
+ info->volt_table = exynos4210_volt_table;
+ info->freq_table = exynos4210_freq_table;
+ info->set_freq = exynos4210_set_frequency;
+ info->need_apll_change = exynos4210_pms_change;
- if (!IS_ERR(moutcore))
- clk_put(moutcore);
+ return 0;
+err_mout_apll:
if (!IS_ERR(mout_mpll))
clk_put(mout_mpll);
+err_mout_mpll:
+ if (!IS_ERR(moutcore))
+ clk_put(moutcore);
+err_moutcore:
+ if (!IS_ERR(cpu_clk))
+ clk_put(cpu_clk);
- if (!IS_ERR(mout_apll))
- clk_put(mout_apll);
-
- if (!IS_ERR(arm_regulator))
- regulator_put(arm_regulator);
-
- printk(KERN_ERR "%s: failed initialization\n", __func__);
-
+ pr_debug("%s: failed initialization\n", __func__);
return -EINVAL;
}
-late_initcall(exynos4_cpufreq_init);
+EXPORT_SYMBOL(exynos4210_cpufreq_init);