diff options
Diffstat (limited to 'drivers/dma/ioat/dma_v3.c')
| -rw-r--r-- | drivers/dma/ioat/dma_v3.c | 100 |
1 files changed, 79 insertions, 21 deletions
diff --git a/drivers/dma/ioat/dma_v3.c b/drivers/dma/ioat/dma_v3.c index 35d1e33afd5b..9908c9e94b2d 100644 --- a/drivers/dma/ioat/dma_v3.c +++ b/drivers/dma/ioat/dma_v3.c @@ -378,6 +378,8 @@ static void ioat3_timer_event(unsigned long data) u32 chanerr; chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET); + dev_err(to_dev(chan), "%s: Channel halted (%x)\n", + __func__, chanerr); BUG_ON(is_ioat_bug(chanerr)); } @@ -569,7 +571,7 @@ __ioat3_prep_xor_lock(struct dma_chan *c, enum sum_check_flags *result, dump_desc_dbg(ioat, compl_desc); /* we leave the channel locked to ensure in order submission */ - return &desc->txd; + return &compl_desc->txd; } static struct dma_async_tx_descriptor * @@ -648,9 +650,11 @@ __ioat3_prep_pq_lock(struct dma_chan *c, enum sum_check_flags *result, num_descs = ioat2_xferlen_to_descs(ioat, len); /* we need 2x the number of descriptors to cover greater than 3 - * sources + * sources (we need 1 extra source in the q-only continuation + * case and 3 extra sources in the p+q continuation case. */ - if (src_cnt > 3 || flags & DMA_PREP_CONTINUE) { + if (src_cnt + dmaf_p_disabled_continue(flags) > 3 || + (dmaf_continue(flags) && !dmaf_p_disabled_continue(flags))) { with_ext = 1; num_descs *= 2; } else @@ -728,7 +732,7 @@ __ioat3_prep_pq_lock(struct dma_chan *c, enum sum_check_flags *result, dump_desc_dbg(ioat, compl_desc); /* we leave the channel locked to ensure in order submission */ - return &desc->txd; + return &compl_desc->txd; } static struct dma_async_tx_descriptor * @@ -736,10 +740,16 @@ ioat3_prep_pq(struct dma_chan *chan, dma_addr_t *dst, dma_addr_t *src, unsigned int src_cnt, const unsigned char *scf, size_t len, unsigned long flags) { + /* specify valid address for disabled result */ + if (flags & DMA_PREP_PQ_DISABLE_P) + dst[0] = dst[1]; + if (flags & DMA_PREP_PQ_DISABLE_Q) + dst[1] = dst[0]; + /* handle the single source multiply case from the raid6 * recovery path */ - if (unlikely((flags & DMA_PREP_PQ_DISABLE_P) && src_cnt == 1)) { + if ((flags & DMA_PREP_PQ_DISABLE_P) && src_cnt == 1) { dma_addr_t single_source[2]; unsigned char single_source_coef[2]; @@ -761,6 +771,12 @@ ioat3_prep_pq_val(struct dma_chan *chan, dma_addr_t *pq, dma_addr_t *src, unsigned int src_cnt, const unsigned char *scf, size_t len, enum sum_check_flags *pqres, unsigned long flags) { + /* specify valid address for disabled result */ + if (flags & DMA_PREP_PQ_DISABLE_P) + pq[0] = pq[1]; + if (flags & DMA_PREP_PQ_DISABLE_Q) + pq[1] = pq[0]; + /* the cleanup routine only sets bits on validate failure, it * does not clear bits on validate success... so clear it here */ @@ -778,9 +794,9 @@ ioat3_prep_pqxor(struct dma_chan *chan, dma_addr_t dst, dma_addr_t *src, dma_addr_t pq[2]; memset(scf, 0, src_cnt); - flags |= DMA_PREP_PQ_DISABLE_Q; pq[0] = dst; - pq[1] = ~0; + flags |= DMA_PREP_PQ_DISABLE_Q; + pq[1] = dst; /* specify valid address for disabled result */ return __ioat3_prep_pq_lock(chan, NULL, pq, src, src_cnt, scf, len, flags); @@ -800,9 +816,9 @@ ioat3_prep_pqxor_val(struct dma_chan *chan, dma_addr_t *src, *result = 0; memset(scf, 0, src_cnt); - flags |= DMA_PREP_PQ_DISABLE_Q; pq[0] = src[0]; - pq[1] = ~0; + flags |= DMA_PREP_PQ_DISABLE_Q; + pq[1] = pq[0]; /* specify valid address for disabled result */ return __ioat3_prep_pq_lock(chan, result, pq, &src[1], src_cnt - 1, scf, len, flags); @@ -1114,18 +1130,58 @@ static int __devinit ioat3_dma_self_test(struct ioatdma_device *device) return 0; } +static int ioat3_reset_hw(struct ioat_chan_common *chan) +{ + /* throw away whatever the channel was doing and get it + * initialized, with ioat3 specific workarounds + */ + struct ioatdma_device *device = chan->device; + struct pci_dev *pdev = device->pdev; + u32 chanerr; + u16 dev_id; + int err; + + ioat2_quiesce(chan, msecs_to_jiffies(100)); + + chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET); + writel(chanerr, chan->reg_base + IOAT_CHANERR_OFFSET); + + /* -= IOAT ver.3 workarounds =- */ + /* Write CHANERRMSK_INT with 3E07h to mask out the errors + * that can cause stability issues for IOAT ver.3, and clear any + * pending errors + */ + pci_write_config_dword(pdev, IOAT_PCI_CHANERRMASK_INT_OFFSET, 0x3e07); + err = pci_read_config_dword(pdev, IOAT_PCI_CHANERR_INT_OFFSET, &chanerr); + if (err) { + dev_err(&pdev->dev, "channel error register unreachable\n"); + return err; + } + pci_write_config_dword(pdev, IOAT_PCI_CHANERR_INT_OFFSET, chanerr); + + /* Clear DMAUNCERRSTS Cfg-Reg Parity Error status bit + * (workaround for spurious config parity error after restart) + */ + pci_read_config_word(pdev, IOAT_PCI_DEVICE_ID_OFFSET, &dev_id); + if (dev_id == PCI_DEVICE_ID_INTEL_IOAT_TBG0) + pci_write_config_dword(pdev, IOAT_PCI_DMAUNCERRSTS_OFFSET, 0x10); + + return ioat2_reset_sync(chan, msecs_to_jiffies(200)); +} + int __devinit ioat3_dma_probe(struct ioatdma_device *device, int dca) { struct pci_dev *pdev = device->pdev; + int dca_en = system_has_dca_enabled(pdev); struct dma_device *dma; struct dma_chan *c; struct ioat_chan_common *chan; bool is_raid_device = false; int err; - u16 dev_id; u32 cap; device->enumerate_channels = ioat2_enumerate_channels; + device->reset_hw = ioat3_reset_hw; device->self_test = ioat3_dma_self_test; dma = &device->common; dma->device_prep_dma_memcpy = ioat2_dma_prep_memcpy_lock; @@ -1137,6 +1193,11 @@ int __devinit ioat3_dma_probe(struct ioatdma_device *device, int dca) dma->device_prep_dma_interrupt = ioat3_prep_interrupt_lock; cap = readl(device->reg_base + IOAT_DMA_CAP_OFFSET); + + /* dca is incompatible with raid operations */ + if (dca_en && (cap & (IOAT_CAP_XOR|IOAT_CAP_PQ))) + cap &= ~(IOAT_CAP_XOR|IOAT_CAP_PQ); + if (cap & IOAT_CAP_XOR) { is_raid_device = true; dma->max_xor = 8; @@ -1186,18 +1247,15 @@ int __devinit ioat3_dma_probe(struct ioatdma_device *device, int dca) device->timer_fn = ioat2_timer_event; } - /* -= IOAT ver.3 workarounds =- */ - /* Write CHANERRMSK_INT with 3E07h to mask out the errors - * that can cause stability issues for IOAT ver.3 - */ - pci_write_config_dword(pdev, IOAT_PCI_CHANERRMASK_INT_OFFSET, 0x3e07); + #ifdef CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA + dma_cap_clear(DMA_PQ_VAL, dma->cap_mask); + dma->device_prep_dma_pq_val = NULL; + #endif - /* Clear DMAUNCERRSTS Cfg-Reg Parity Error status bit - * (workaround for spurious config parity error after restart) - */ - pci_read_config_word(pdev, IOAT_PCI_DEVICE_ID_OFFSET, &dev_id); - if (dev_id == PCI_DEVICE_ID_INTEL_IOAT_TBG0) - pci_write_config_dword(pdev, IOAT_PCI_DMAUNCERRSTS_OFFSET, 0x10); + #ifdef CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA + dma_cap_clear(DMA_XOR_VAL, dma->cap_mask); + dma->device_prep_dma_xor_val = NULL; + #endif err = ioat_probe(device); if (err) |