1 files changed, 275 insertions, 0 deletions
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 4fce75013674..ca0c67bc25c6 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -988,6 +988,281 @@ static int sys_addr_to_csrow(struct mem_ctl_info *mci, u64 sys_addr)
 	return csrow;
 }
 
+/* Protect the PCI config register pairs used for DF indirect access. */
+static DEFINE_MUTEX(df_indirect_mutex);
+
+/*
+ * Data Fabric Indirect Access uses FICAA/FICAD.
+ *
+ * Fabric Indirect Configuration Access Address (FICAA): Constructed based
+ * on the device's Instance Id and the PCI function and register offset of
+ * the desired register.
+ *
+ * Fabric Indirect Configuration Access Data (FICAD): There are FICAD LO
+ * and FICAD HI registers but so far we only need the LO register.
+ *
+ * Use Instance Id 0xFF to indicate a broadcast read.
+ */
+#define DF_BROADCAST	0xFF
+static int __df_indirect_read(u16 node, u8 func, u16 reg, u8 instance_id, u32 *lo)
+{
+	struct pci_dev *F4;
+	u32 ficaa;
+	int err = -ENODEV;
+
+	if (node >= amd_nb_num())
+		goto out;
+
+	F4 = node_to_amd_nb(node)->link;
+	if (!F4)
+		goto out;
+
+	ficaa  = (instance_id == DF_BROADCAST) ? 0 : 1;
+	ficaa |= reg & 0x3FC;
+	ficaa |= (func & 0x7) << 11;
+	ficaa |= instance_id << 16;
+
+	mutex_lock(&df_indirect_mutex);
+
+	err = pci_write_config_dword(F4, 0x5C, ficaa);
+	if (err) {
+		pr_warn("Error writing DF Indirect FICAA, FICAA=0x%x\n", ficaa);
+		goto out_unlock;
+	}
+
+	err = pci_read_config_dword(F4, 0x98, lo);
+	if (err)
+		pr_warn("Error reading DF Indirect FICAD LO, FICAA=0x%x.\n", ficaa);
+
+out_unlock:
+	mutex_unlock(&df_indirect_mutex);
+
+out:
+	return err;
+}
+
+static int df_indirect_read_instance(u16 node, u8 func, u16 reg, u8 instance_id, u32 *lo)
+{
+	return __df_indirect_read(node, func, reg, instance_id, lo);
+}
+
+static int df_indirect_read_broadcast(u16 node, u8 func, u16 reg, u32 *lo)
+{
+	return __df_indirect_read(node, func, reg, DF_BROADCAST, lo);
+}
+
+struct addr_ctx {
+	u64 ret_addr;
+	u32 tmp;
+	u16 nid;
+	u8 inst_id;
+};
+
+static int umc_normaddr_to_sysaddr(u64 norm_addr, u16 nid, u8 umc, u64 *sys_addr)
+{
+	u64 dram_base_addr, dram_limit_addr, dram_hole_base;
+
+	u8 die_id_shift, die_id_mask, socket_id_shift, socket_id_mask;
+	u8 intlv_num_dies, intlv_num_chan, intlv_num_sockets;
+	u8 intlv_addr_sel, intlv_addr_bit;
+	u8 num_intlv_bits, hashed_bit;
+	u8 lgcy_mmio_hole_en, base = 0;
+	u8 cs_mask, cs_id = 0;
+	bool hash_enabled = false;
+
+	struct addr_ctx ctx;
+
+	memset(&ctx, 0, sizeof(ctx));
+
+	/* Start from the normalized address */
+	ctx.ret_addr = norm_addr;
+
+	ctx.nid = nid;
+	ctx.inst_id = umc;
+
+	/* Read D18F0x1B4 (DramOffset), check if base 1 is used. */
+	if (df_indirect_read_instance(nid, 0, 0x1B4, umc, &ctx.tmp))
+		goto out_err;
+
+	/* Remove HiAddrOffset from normalized address, if enabled: */
+	if (ctx.tmp & BIT(0)) {
+		u64 hi_addr_offset = (ctx.tmp & GENMASK_ULL(31, 20)) << 8;
+
+		if (norm_addr >= hi_addr_offset) {
+			ctx.ret_addr -= hi_addr_offset;
+			base = 1;
+		}
+	}
+
+	/* Read D18F0x110 (DramBaseAddress). */
+	if (df_indirect_read_instance(nid, 0, 0x110 + (8 * base), umc, &ctx.tmp))
+		goto out_err;
+
+	/* Check if address range is valid. */
+	if (!(ctx.tmp & BIT(0))) {
+		pr_err("%s: Invalid DramBaseAddress range: 0x%x.\n",
+			__func__, ctx.tmp);
+		goto out_err;
+	}
+
+	lgcy_mmio_hole_en = ctx.tmp & BIT(1);
+	intlv_num_chan	  = (ctx.tmp >> 4) & 0xF;
+	intlv_addr_sel	  = (ctx.tmp >> 8) & 0x7;
+	dram_base_addr	  = (ctx.tmp & GENMASK_ULL(31, 12)) << 16;
+
+	/* {0, 1, 2, 3} map to address bits {8, 9, 10, 11} respectively */
+	if (intlv_addr_sel > 3) {
+		pr_err("%s: Invalid interleave address select %d.\n",
+			__func__, intlv_addr_sel);
+		goto out_err;
+	}
+
+	/* Read D18F0x114 (DramLimitAddress). */
+	if (df_indirect_read_instance(nid, 0, 0x114 + (8 * base), umc, &ctx.tmp))
+		goto out_err;
+
+	intlv_num_sockets = (ctx.tmp >> 8) & 0x1;
+	intlv_num_dies	  = (ctx.tmp >> 10) & 0x3;
+	dram_limit_addr	  = ((ctx.tmp & GENMASK_ULL(31, 12)) << 16) | GENMASK_ULL(27, 0);
+
+	intlv_addr_bit = intlv_addr_sel + 8;
+
+	/* Re-use intlv_num_chan by setting it equal to log2(#channels) */
+	switch (intlv_num_chan) {
+	case 0:	intlv_num_chan = 0; break;
+	case 1: intlv_num_chan = 1; break;
+	case 3: intlv_num_chan = 2; break;
+	case 5:	intlv_num_chan = 3; break;
+	case 7:	intlv_num_chan = 4; break;
+
+	case 8: intlv_num_chan = 1;
+		hash_enabled = true;
+		break;
+	default:
+		pr_err("%s: Invalid number of interleaved channels %d.\n",
+			__func__, intlv_num_chan);
+		goto out_err;
+	}
+
+	num_intlv_bits = intlv_num_chan;
+
+	if (intlv_num_dies > 2) {
+		pr_err("%s: Invalid number of interleaved nodes/dies %d.\n",
+			__func__, intlv_num_dies);
+		goto out_err;
+	}
+
+	num_intlv_bits += intlv_num_dies;
+
+	/* Add a bit if sockets are interleaved. */
+	num_intlv_bits += intlv_num_sockets;
+
+	/* Assert num_intlv_bits <= 4 */
+	if (num_intlv_bits > 4) {
+		pr_err("%s: Invalid interleave bits %d.\n",
+			__func__, num_intlv_bits);
+		goto out_err;
+	}
+
+	if (num_intlv_bits > 0) {
+		u64 temp_addr_x, temp_addr_i, temp_addr_y;
+		u8 die_id_bit, sock_id_bit, cs_fabric_id;
+
+		/*
+		 * Read FabricBlockInstanceInformation3_CS[BlockFabricID].
+		 * This is the fabric id for this coherent slave. Use
+		 * umc/channel# as instance id of the coherent slave
+		 * for FICAA.
+		 */
+		if (df_indirect_read_instance(nid, 0, 0x50, umc, &ctx.tmp))
+			goto out_err;
+
+		cs_fabric_id = (ctx.tmp >> 8) & 0xFF;
+		die_id_bit   = 0;
+
+		/* If interleaved over more than 1 channel: */
+		if (intlv_num_chan) {
+			die_id_bit = intlv_num_chan;
+			cs_mask	   = (1 << die_id_bit) - 1;
+			cs_id	   = cs_fabric_id & cs_mask;
+		}
+
+		sock_id_bit = die_id_bit;
+
+		/* Read D18F1x208 (SystemFabricIdMask). */
+		if (intlv_num_dies || intlv_num_sockets)
+			if (df_indirect_read_broadcast(nid, 1, 0x208, &ctx.tmp))
+				goto out_err;
+
+		/* If interleaved over more than 1 die. */
+		if (intlv_num_dies) {
+			sock_id_bit  = die_id_bit + intlv_num_dies;
+			die_id_shift = (ctx.tmp >> 24) & 0xF;
+			die_id_mask  = (ctx.tmp >> 8) & 0xFF;
+
+			cs_id |= ((cs_fabric_id & die_id_mask) >> die_id_shift) << die_id_bit;
+		}
+
+		/* If interleaved over more than 1 socket. */
+		if (intlv_num_sockets) {
+			socket_id_shift	= (ctx.tmp >> 28) & 0xF;
+			socket_id_mask	= (ctx.tmp >> 16) & 0xFF;
+
+			cs_id |= ((cs_fabric_id & socket_id_mask) >> socket_id_shift) << sock_id_bit;
+		}
+
+		/*
+		 * The pre-interleaved address consists of XXXXXXIIIYYYYY
+		 * where III is the ID for this CS, and XXXXXXYYYYY are the
+		 * address bits from the post-interleaved address.
+		 * "num_intlv_bits" has been calculated to tell us how many "I"
+		 * bits there are. "intlv_addr_bit" tells us how many "Y" bits
+		 * there are (where "I" starts).
+		 */
+		temp_addr_y = ctx.ret_addr & GENMASK_ULL(intlv_addr_bit - 1, 0);
+		temp_addr_i = (cs_id << intlv_addr_bit);
+		temp_addr_x = (ctx.ret_addr & GENMASK_ULL(63, intlv_addr_bit)) << num_intlv_bits;
+		ctx.ret_addr    = temp_addr_x | temp_addr_i | temp_addr_y;
+	}
+
+	/* Add dram base address */
+	ctx.ret_addr += dram_base_addr;
+
+	/* If legacy MMIO hole enabled */
+	if (lgcy_mmio_hole_en) {
+		if (df_indirect_read_broadcast(nid, 0, 0x104, &ctx.tmp))
+			goto out_err;
+
+		dram_hole_base = ctx.tmp & GENMASK(31, 24);
+		if (ctx.ret_addr >= dram_hole_base)
+			ctx.ret_addr += (BIT_ULL(32) - dram_hole_base);
+	}
+
+	if (hash_enabled) {
+		/* Save some parentheses and grab ls-bit at the end. */
+		hashed_bit =	(ctx.ret_addr >> 12) ^
+				(ctx.ret_addr >> 18) ^
+				(ctx.ret_addr >> 21) ^
+				(ctx.ret_addr >> 30) ^
+				cs_id;
+
+		hashed_bit &= BIT(0);
+
+		if (hashed_bit != ((ctx.ret_addr >> intlv_addr_bit) & BIT(0)))
+			ctx.ret_addr ^= BIT(intlv_addr_bit);
+	}
+
+	/* Is calculated system address is above DRAM limit address? */
+	if (ctx.ret_addr > dram_limit_addr)
+		goto out_err;
+
+	*sys_addr = ctx.ret_addr;
+	return 0;
+
+out_err:
+	return -EINVAL;
+}
+
 static int get_channel_from_ecc_syndrome(struct mem_ctl_info *, u16);
 
 /*