diff options
Diffstat (limited to 'drivers/gpio/gpio-ml-ioh.c')
| -rw-r--r-- | drivers/gpio/gpio-ml-ioh.c | 357 |
1 files changed, 357 insertions, 0 deletions
diff --git a/drivers/gpio/gpio-ml-ioh.c b/drivers/gpio/gpio-ml-ioh.c new file mode 100644 index 000000000000..1bc621ac3536 --- /dev/null +++ b/drivers/gpio/gpio-ml-ioh.c @@ -0,0 +1,357 @@ +/* + * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + */ +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/pci.h> +#include <linux/gpio.h> + +#define PCI_VENDOR_ID_ROHM 0x10DB + +struct ioh_reg_comn { + u32 ien; + u32 istatus; + u32 idisp; + u32 iclr; + u32 imask; + u32 imaskclr; + u32 po; + u32 pi; + u32 pm; + u32 im_0; + u32 im_1; + u32 reserved; +}; + +struct ioh_regs { + struct ioh_reg_comn regs[8]; + u32 reserve1[16]; + u32 ioh_sel_reg[4]; + u32 reserve2[11]; + u32 srst; +}; + +/** + * struct ioh_gpio_reg_data - The register store data. + * @po_reg: To store contents of PO register. + * @pm_reg: To store contents of PM register. + */ +struct ioh_gpio_reg_data { + u32 po_reg; + u32 pm_reg; +}; + +/** + * struct ioh_gpio - GPIO private data structure. + * @base: PCI base address of Memory mapped I/O register. + * @reg: Memory mapped IOH GPIO register list. + * @dev: Pointer to device structure. + * @gpio: Data for GPIO infrastructure. + * @ioh_gpio_reg: Memory mapped Register data is saved here + * when suspend. + * @ch: Indicate GPIO channel + */ +struct ioh_gpio { + void __iomem *base; + struct ioh_regs __iomem *reg; + struct device *dev; + struct gpio_chip gpio; + struct ioh_gpio_reg_data ioh_gpio_reg; + struct mutex lock; + int ch; +}; + +static const int num_ports[] = {6, 12, 16, 16, 15, 16, 16, 12}; + +static void ioh_gpio_set(struct gpio_chip *gpio, unsigned nr, int val) +{ + u32 reg_val; + struct ioh_gpio *chip = container_of(gpio, struct ioh_gpio, gpio); + + mutex_lock(&chip->lock); + reg_val = ioread32(&chip->reg->regs[chip->ch].po); + if (val) + reg_val |= (1 << nr); + else + reg_val &= ~(1 << nr); + + iowrite32(reg_val, &chip->reg->regs[chip->ch].po); + mutex_unlock(&chip->lock); +} + +static int ioh_gpio_get(struct gpio_chip *gpio, unsigned nr) +{ + struct ioh_gpio *chip = container_of(gpio, struct ioh_gpio, gpio); + + return ioread32(&chip->reg->regs[chip->ch].pi) & (1 << nr); +} + +static int ioh_gpio_direction_output(struct gpio_chip *gpio, unsigned nr, + int val) +{ + struct ioh_gpio *chip = container_of(gpio, struct ioh_gpio, gpio); + u32 pm; + u32 reg_val; + + mutex_lock(&chip->lock); + pm = ioread32(&chip->reg->regs[chip->ch].pm) & + ((1 << num_ports[chip->ch]) - 1); + pm |= (1 << nr); + iowrite32(pm, &chip->reg->regs[chip->ch].pm); + + reg_val = ioread32(&chip->reg->regs[chip->ch].po); + if (val) + reg_val |= (1 << nr); + else + reg_val &= ~(1 << nr); + iowrite32(reg_val, &chip->reg->regs[chip->ch].po); + + mutex_unlock(&chip->lock); + + return 0; +} + +static int ioh_gpio_direction_input(struct gpio_chip *gpio, unsigned nr) +{ + struct ioh_gpio *chip = container_of(gpio, struct ioh_gpio, gpio); + u32 pm; + + mutex_lock(&chip->lock); + pm = ioread32(&chip->reg->regs[chip->ch].pm) & + ((1 << num_ports[chip->ch]) - 1); + pm &= ~(1 << nr); + iowrite32(pm, &chip->reg->regs[chip->ch].pm); + mutex_unlock(&chip->lock); + + return 0; +} + +#ifdef CONFIG_PM +/* + * Save register configuration and disable interrupts. + */ +static void ioh_gpio_save_reg_conf(struct ioh_gpio *chip) +{ + chip->ioh_gpio_reg.po_reg = ioread32(&chip->reg->regs[chip->ch].po); + chip->ioh_gpio_reg.pm_reg = ioread32(&chip->reg->regs[chip->ch].pm); +} + +/* + * This function restores the register configuration of the GPIO device. + */ +static void ioh_gpio_restore_reg_conf(struct ioh_gpio *chip) +{ + /* to store contents of PO register */ + iowrite32(chip->ioh_gpio_reg.po_reg, &chip->reg->regs[chip->ch].po); + /* to store contents of PM register */ + iowrite32(chip->ioh_gpio_reg.pm_reg, &chip->reg->regs[chip->ch].pm); +} +#endif + +static void ioh_gpio_setup(struct ioh_gpio *chip, int num_port) +{ + struct gpio_chip *gpio = &chip->gpio; + + gpio->label = dev_name(chip->dev); + gpio->owner = THIS_MODULE; + gpio->direction_input = ioh_gpio_direction_input; + gpio->get = ioh_gpio_get; + gpio->direction_output = ioh_gpio_direction_output; + gpio->set = ioh_gpio_set; + gpio->dbg_show = NULL; + gpio->base = -1; + gpio->ngpio = num_port; + gpio->can_sleep = 0; +} + +static int __devinit ioh_gpio_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + int ret; + int i; + struct ioh_gpio *chip; + void __iomem *base; + void __iomem *chip_save; + + ret = pci_enable_device(pdev); + if (ret) { + dev_err(&pdev->dev, "%s : pci_enable_device failed", __func__); + goto err_pci_enable; + } + + ret = pci_request_regions(pdev, KBUILD_MODNAME); + if (ret) { + dev_err(&pdev->dev, "pci_request_regions failed-%d", ret); + goto err_request_regions; + } + + base = pci_iomap(pdev, 1, 0); + if (base == 0) { + dev_err(&pdev->dev, "%s : pci_iomap failed", __func__); + ret = -ENOMEM; + goto err_iomap; + } + + chip_save = kzalloc(sizeof(*chip) * 8, GFP_KERNEL); + if (chip_save == NULL) { + dev_err(&pdev->dev, "%s : kzalloc failed", __func__); + ret = -ENOMEM; + goto err_kzalloc; + } + + chip = chip_save; + for (i = 0; i < 8; i++, chip++) { + chip->dev = &pdev->dev; + chip->base = base; + chip->reg = chip->base; + chip->ch = i; + mutex_init(&chip->lock); + ioh_gpio_setup(chip, num_ports[i]); + ret = gpiochip_add(&chip->gpio); + if (ret) { + dev_err(&pdev->dev, "IOH gpio: Failed to register GPIO\n"); + goto err_gpiochip_add; + } + } + + chip = chip_save; + pci_set_drvdata(pdev, chip); + + return 0; + +err_gpiochip_add: + for (; i != 0; i--) { + chip--; + ret = gpiochip_remove(&chip->gpio); + if (ret) + dev_err(&pdev->dev, "Failed gpiochip_remove(%d)\n", i); + } + kfree(chip_save); + +err_kzalloc: + pci_iounmap(pdev, base); + +err_iomap: + pci_release_regions(pdev); + +err_request_regions: + pci_disable_device(pdev); + +err_pci_enable: + + dev_err(&pdev->dev, "%s Failed returns %d\n", __func__, ret); + return ret; +} + +static void __devexit ioh_gpio_remove(struct pci_dev *pdev) +{ + int err; + int i; + struct ioh_gpio *chip = pci_get_drvdata(pdev); + void __iomem *chip_save; + + chip_save = chip; + for (i = 0; i < 8; i++, chip++) { + err = gpiochip_remove(&chip->gpio); + if (err) + dev_err(&pdev->dev, "Failed gpiochip_remove\n"); + } + + chip = chip_save; + pci_iounmap(pdev, chip->base); + pci_release_regions(pdev); + pci_disable_device(pdev); + kfree(chip); +} + +#ifdef CONFIG_PM +static int ioh_gpio_suspend(struct pci_dev *pdev, pm_message_t state) +{ + s32 ret; + struct ioh_gpio *chip = pci_get_drvdata(pdev); + + ioh_gpio_save_reg_conf(chip); + ioh_gpio_restore_reg_conf(chip); + + ret = pci_save_state(pdev); + if (ret) { + dev_err(&pdev->dev, "pci_save_state Failed-%d\n", ret); + return ret; + } + pci_disable_device(pdev); + pci_set_power_state(pdev, PCI_D0); + ret = pci_enable_wake(pdev, PCI_D0, 1); + if (ret) + dev_err(&pdev->dev, "pci_enable_wake Failed -%d\n", ret); + + return 0; +} + +static int ioh_gpio_resume(struct pci_dev *pdev) +{ + s32 ret; + struct ioh_gpio *chip = pci_get_drvdata(pdev); + + ret = pci_enable_wake(pdev, PCI_D0, 0); + + pci_set_power_state(pdev, PCI_D0); + ret = pci_enable_device(pdev); + if (ret) { + dev_err(&pdev->dev, "pci_enable_device Failed-%d ", ret); + return ret; + } + pci_restore_state(pdev); + + iowrite32(0x01, &chip->reg->srst); + iowrite32(0x00, &chip->reg->srst); + ioh_gpio_restore_reg_conf(chip); + + return 0; +} +#else +#define ioh_gpio_suspend NULL +#define ioh_gpio_resume NULL +#endif + +static DEFINE_PCI_DEVICE_TABLE(ioh_gpio_pcidev_id) = { + { PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x802E) }, + { 0, } +}; +MODULE_DEVICE_TABLE(pci, ioh_gpio_pcidev_id); + +static struct pci_driver ioh_gpio_driver = { + .name = "ml_ioh_gpio", + .id_table = ioh_gpio_pcidev_id, + .probe = ioh_gpio_probe, + .remove = __devexit_p(ioh_gpio_remove), + .suspend = ioh_gpio_suspend, + .resume = ioh_gpio_resume +}; + +static int __init ioh_gpio_pci_init(void) +{ + return pci_register_driver(&ioh_gpio_driver); +} +module_init(ioh_gpio_pci_init); + +static void __exit ioh_gpio_pci_exit(void) +{ + pci_unregister_driver(&ioh_gpio_driver); +} +module_exit(ioh_gpio_pci_exit); + +MODULE_DESCRIPTION("OKI SEMICONDUCTOR ML-IOH series GPIO Driver"); +MODULE_LICENSE("GPL"); |