diff options
Diffstat (limited to 'drivers/gpio/gpio-pcf857x.c')
| -rw-r--r-- | drivers/gpio/gpio-pcf857x.c | 369 |
1 files changed, 369 insertions, 0 deletions
diff --git a/drivers/gpio/gpio-pcf857x.c b/drivers/gpio/gpio-pcf857x.c new file mode 100644 index 000000000000..7369fdda92b0 --- /dev/null +++ b/drivers/gpio/gpio-pcf857x.c @@ -0,0 +1,369 @@ +/* + * Driver for pcf857x, pca857x, and pca967x I2C GPIO expanders + * + * Copyright (C) 2007 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/i2c/pcf857x.h> + + +static const struct i2c_device_id pcf857x_id[] = { + { "pcf8574", 8 }, + { "pcf8574a", 8 }, + { "pca8574", 8 }, + { "pca9670", 8 }, + { "pca9672", 8 }, + { "pca9674", 8 }, + { "pcf8575", 16 }, + { "pca8575", 16 }, + { "pca9671", 16 }, + { "pca9673", 16 }, + { "pca9675", 16 }, + { "max7328", 8 }, + { "max7329", 8 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, pcf857x_id); + +/* + * The pcf857x, pca857x, and pca967x chips only expose one read and one + * write register. Writing a "one" bit (to match the reset state) lets + * that pin be used as an input; it's not an open-drain model, but acts + * a bit like one. This is described as "quasi-bidirectional"; read the + * chip documentation for details. + * + * Many other I2C GPIO expander chips (like the pca953x models) have + * more complex register models and more conventional circuitry using + * push/pull drivers. They often use the same 0x20..0x27 addresses as + * pcf857x parts, making the "legacy" I2C driver model problematic. + */ +struct pcf857x { + struct gpio_chip chip; + struct i2c_client *client; + struct mutex lock; /* protect 'out' */ + unsigned out; /* software latch */ +}; + +/*-------------------------------------------------------------------------*/ + +/* Talk to 8-bit I/O expander */ + +static int pcf857x_input8(struct gpio_chip *chip, unsigned offset) +{ + struct pcf857x *gpio = container_of(chip, struct pcf857x, chip); + int status; + + mutex_lock(&gpio->lock); + gpio->out |= (1 << offset); + status = i2c_smbus_write_byte(gpio->client, gpio->out); + mutex_unlock(&gpio->lock); + + return status; +} + +static int pcf857x_get8(struct gpio_chip *chip, unsigned offset) +{ + struct pcf857x *gpio = container_of(chip, struct pcf857x, chip); + s32 value; + + value = i2c_smbus_read_byte(gpio->client); + return (value < 0) ? 0 : (value & (1 << offset)); +} + +static int pcf857x_output8(struct gpio_chip *chip, unsigned offset, int value) +{ + struct pcf857x *gpio = container_of(chip, struct pcf857x, chip); + unsigned bit = 1 << offset; + int status; + + mutex_lock(&gpio->lock); + if (value) + gpio->out |= bit; + else + gpio->out &= ~bit; + status = i2c_smbus_write_byte(gpio->client, gpio->out); + mutex_unlock(&gpio->lock); + + return status; +} + +static void pcf857x_set8(struct gpio_chip *chip, unsigned offset, int value) +{ + pcf857x_output8(chip, offset, value); +} + +/*-------------------------------------------------------------------------*/ + +/* Talk to 16-bit I/O expander */ + +static int i2c_write_le16(struct i2c_client *client, u16 word) +{ + u8 buf[2] = { word & 0xff, word >> 8, }; + int status; + + status = i2c_master_send(client, buf, 2); + return (status < 0) ? status : 0; +} + +static int i2c_read_le16(struct i2c_client *client) +{ + u8 buf[2]; + int status; + + status = i2c_master_recv(client, buf, 2); + if (status < 0) + return status; + return (buf[1] << 8) | buf[0]; +} + +static int pcf857x_input16(struct gpio_chip *chip, unsigned offset) +{ + struct pcf857x *gpio = container_of(chip, struct pcf857x, chip); + int status; + + mutex_lock(&gpio->lock); + gpio->out |= (1 << offset); + status = i2c_write_le16(gpio->client, gpio->out); + mutex_unlock(&gpio->lock); + + return status; +} + +static int pcf857x_get16(struct gpio_chip *chip, unsigned offset) +{ + struct pcf857x *gpio = container_of(chip, struct pcf857x, chip); + int value; + + value = i2c_read_le16(gpio->client); + return (value < 0) ? 0 : (value & (1 << offset)); +} + +static int pcf857x_output16(struct gpio_chip *chip, unsigned offset, int value) +{ + struct pcf857x *gpio = container_of(chip, struct pcf857x, chip); + unsigned bit = 1 << offset; + int status; + + mutex_lock(&gpio->lock); + if (value) + gpio->out |= bit; + else + gpio->out &= ~bit; + status = i2c_write_le16(gpio->client, gpio->out); + mutex_unlock(&gpio->lock); + + return status; +} + +static void pcf857x_set16(struct gpio_chip *chip, unsigned offset, int value) +{ + pcf857x_output16(chip, offset, value); +} + +/*-------------------------------------------------------------------------*/ + +static int pcf857x_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct pcf857x_platform_data *pdata; + struct pcf857x *gpio; + int status; + + pdata = client->dev.platform_data; + if (!pdata) { + dev_dbg(&client->dev, "no platform data\n"); + } + + /* Allocate, initialize, and register this gpio_chip. */ + gpio = kzalloc(sizeof *gpio, GFP_KERNEL); + if (!gpio) + return -ENOMEM; + + mutex_init(&gpio->lock); + + gpio->chip.base = pdata ? pdata->gpio_base : -1; + gpio->chip.can_sleep = 1; + gpio->chip.dev = &client->dev; + gpio->chip.owner = THIS_MODULE; + + /* NOTE: the OnSemi jlc1562b is also largely compatible with + * these parts, notably for output. It has a low-resolution + * DAC instead of pin change IRQs; and its inputs can be the + * result of comparators. + */ + + /* 8574 addresses are 0x20..0x27; 8574a uses 0x38..0x3f; + * 9670, 9672, 9764, and 9764a use quite a variety. + * + * NOTE: we don't distinguish here between *4 and *4a parts. + */ + gpio->chip.ngpio = id->driver_data; + if (gpio->chip.ngpio == 8) { + gpio->chip.direction_input = pcf857x_input8; + gpio->chip.get = pcf857x_get8; + gpio->chip.direction_output = pcf857x_output8; + gpio->chip.set = pcf857x_set8; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE)) + status = -EIO; + + /* fail if there's no chip present */ + else + status = i2c_smbus_read_byte(client); + + /* '75/'75c addresses are 0x20..0x27, just like the '74; + * the '75c doesn't have a current source pulling high. + * 9671, 9673, and 9765 use quite a variety of addresses. + * + * NOTE: we don't distinguish here between '75 and '75c parts. + */ + } else if (gpio->chip.ngpio == 16) { + gpio->chip.direction_input = pcf857x_input16; + gpio->chip.get = pcf857x_get16; + gpio->chip.direction_output = pcf857x_output16; + gpio->chip.set = pcf857x_set16; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) + status = -EIO; + + /* fail if there's no chip present */ + else + status = i2c_read_le16(client); + + } else { + dev_dbg(&client->dev, "unsupported number of gpios\n"); + status = -EINVAL; + } + + if (status < 0) + goto fail; + + gpio->chip.label = client->name; + + gpio->client = client; + i2c_set_clientdata(client, gpio); + + /* NOTE: these chips have strange "quasi-bidirectional" I/O pins. + * We can't actually know whether a pin is configured (a) as output + * and driving the signal low, or (b) as input and reporting a low + * value ... without knowing the last value written since the chip + * came out of reset (if any). We can't read the latched output. + * + * In short, the only reliable solution for setting up pin direction + * is to do it explicitly. The setup() method can do that, but it + * may cause transient glitching since it can't know the last value + * written (some pins may need to be driven low). + * + * Using pdata->n_latch avoids that trouble. When left initialized + * to zero, our software copy of the "latch" then matches the chip's + * all-ones reset state. Otherwise it flags pins to be driven low. + */ + gpio->out = pdata ? ~pdata->n_latch : ~0; + + status = gpiochip_add(&gpio->chip); + if (status < 0) + goto fail; + + /* NOTE: these chips can issue "some pin-changed" IRQs, which we + * don't yet even try to use. Among other issues, the relevant + * genirq state isn't available to modular drivers; and most irq + * methods can't be called from sleeping contexts. + */ + + dev_info(&client->dev, "gpios %d..%d on a %s%s\n", + gpio->chip.base, + gpio->chip.base + gpio->chip.ngpio - 1, + client->name, + client->irq ? " (irq ignored)" : ""); + + /* Let platform code set up the GPIOs and their users. + * Now is the first time anyone could use them. + */ + if (pdata && pdata->setup) { + status = pdata->setup(client, + gpio->chip.base, gpio->chip.ngpio, + pdata->context); + if (status < 0) + dev_warn(&client->dev, "setup --> %d\n", status); + } + + return 0; + +fail: + dev_dbg(&client->dev, "probe error %d for '%s'\n", + status, client->name); + kfree(gpio); + return status; +} + +static int pcf857x_remove(struct i2c_client *client) +{ + struct pcf857x_platform_data *pdata = client->dev.platform_data; + struct pcf857x *gpio = i2c_get_clientdata(client); + int status = 0; + + if (pdata && pdata->teardown) { + status = pdata->teardown(client, + gpio->chip.base, gpio->chip.ngpio, + pdata->context); + if (status < 0) { + dev_err(&client->dev, "%s --> %d\n", + "teardown", status); + return status; + } + } + + status = gpiochip_remove(&gpio->chip); + if (status == 0) + kfree(gpio); + else + dev_err(&client->dev, "%s --> %d\n", "remove", status); + return status; +} + +static struct i2c_driver pcf857x_driver = { + .driver = { + .name = "pcf857x", + .owner = THIS_MODULE, + }, + .probe = pcf857x_probe, + .remove = pcf857x_remove, + .id_table = pcf857x_id, +}; + +static int __init pcf857x_init(void) +{ + return i2c_add_driver(&pcf857x_driver); +} +/* register after i2c postcore initcall and before + * subsys initcalls that may rely on these GPIOs + */ +subsys_initcall(pcf857x_init); + +static void __exit pcf857x_exit(void) +{ + i2c_del_driver(&pcf857x_driver); +} +module_exit(pcf857x_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("David Brownell"); |