diff options
Diffstat (limited to 'drivers/gpu/drm/i915/display/intel_ddi.c')
| -rw-r--r-- | drivers/gpu/drm/i915/display/intel_ddi.c | 4335 |
1 files changed, 4335 insertions, 0 deletions
diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c new file mode 100644 index 000000000000..7925a176f900 --- /dev/null +++ b/drivers/gpu/drm/i915/display/intel_ddi.c @@ -0,0 +1,4335 @@ +/* + * Copyright © 2012 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + * + * Authors: + * Eugeni Dodonov <eugeni.dodonov@intel.com> + * + */ + +#include <drm/drm_scdc_helper.h> + +#include "i915_drv.h" +#include "intel_audio.h" +#include "intel_combo_phy.h" +#include "intel_connector.h" +#include "intel_ddi.h" +#include "intel_dp.h" +#include "intel_dp_link_training.h" +#include "intel_dpio_phy.h" +#include "intel_drv.h" +#include "intel_dsi.h" +#include "intel_fifo_underrun.h" +#include "intel_gmbus.h" +#include "intel_hdcp.h" +#include "intel_hdmi.h" +#include "intel_hotplug.h" +#include "intel_lspcon.h" +#include "intel_panel.h" +#include "intel_psr.h" +#include "intel_vdsc.h" + +struct ddi_buf_trans { + u32 trans1; /* balance leg enable, de-emph level */ + u32 trans2; /* vref sel, vswing */ + u8 i_boost; /* SKL: I_boost; valid: 0x0, 0x1, 0x3, 0x7 */ +}; + +static const u8 index_to_dp_signal_levels[] = { + [0] = DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_0, + [1] = DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_1, + [2] = DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_2, + [3] = DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_3, + [4] = DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_0, + [5] = DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_1, + [6] = DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_2, + [7] = DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_0, + [8] = DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_1, + [9] = DP_TRAIN_VOLTAGE_SWING_LEVEL_3 | DP_TRAIN_PRE_EMPH_LEVEL_0, +}; + +/* HDMI/DVI modes ignore everything but the last 2 items. So we share + * them for both DP and FDI transports, allowing those ports to + * automatically adapt to HDMI connections as well + */ +static const struct ddi_buf_trans hsw_ddi_translations_dp[] = { + { 0x00FFFFFF, 0x0006000E, 0x0 }, + { 0x00D75FFF, 0x0005000A, 0x0 }, + { 0x00C30FFF, 0x00040006, 0x0 }, + { 0x80AAAFFF, 0x000B0000, 0x0 }, + { 0x00FFFFFF, 0x0005000A, 0x0 }, + { 0x00D75FFF, 0x000C0004, 0x0 }, + { 0x80C30FFF, 0x000B0000, 0x0 }, + { 0x00FFFFFF, 0x00040006, 0x0 }, + { 0x80D75FFF, 0x000B0000, 0x0 }, +}; + +static const struct ddi_buf_trans hsw_ddi_translations_fdi[] = { + { 0x00FFFFFF, 0x0007000E, 0x0 }, + { 0x00D75FFF, 0x000F000A, 0x0 }, + { 0x00C30FFF, 0x00060006, 0x0 }, + { 0x00AAAFFF, 0x001E0000, 0x0 }, + { 0x00FFFFFF, 0x000F000A, 0x0 }, + { 0x00D75FFF, 0x00160004, 0x0 }, + { 0x00C30FFF, 0x001E0000, 0x0 }, + { 0x00FFFFFF, 0x00060006, 0x0 }, + { 0x00D75FFF, 0x001E0000, 0x0 }, +}; + +static const struct ddi_buf_trans hsw_ddi_translations_hdmi[] = { + /* Idx NT mV d T mV d db */ + { 0x00FFFFFF, 0x0006000E, 0x0 },/* 0: 400 400 0 */ + { 0x00E79FFF, 0x000E000C, 0x0 },/* 1: 400 500 2 */ + { 0x00D75FFF, 0x0005000A, 0x0 },/* 2: 400 600 3.5 */ + { 0x00FFFFFF, 0x0005000A, 0x0 },/* 3: 600 600 0 */ + { 0x00E79FFF, 0x001D0007, 0x0 },/* 4: 600 750 2 */ + { 0x00D75FFF, 0x000C0004, 0x0 },/* 5: 600 900 3.5 */ + { 0x00FFFFFF, 0x00040006, 0x0 },/* 6: 800 800 0 */ + { 0x80E79FFF, 0x00030002, 0x0 },/* 7: 800 1000 2 */ + { 0x00FFFFFF, 0x00140005, 0x0 },/* 8: 850 850 0 */ + { 0x00FFFFFF, 0x000C0004, 0x0 },/* 9: 900 900 0 */ + { 0x00FFFFFF, 0x001C0003, 0x0 },/* 10: 950 950 0 */ + { 0x80FFFFFF, 0x00030002, 0x0 },/* 11: 1000 1000 0 */ +}; + +static const struct ddi_buf_trans bdw_ddi_translations_edp[] = { + { 0x00FFFFFF, 0x00000012, 0x0 }, + { 0x00EBAFFF, 0x00020011, 0x0 }, + { 0x00C71FFF, 0x0006000F, 0x0 }, + { 0x00AAAFFF, 0x000E000A, 0x0 }, + { 0x00FFFFFF, 0x00020011, 0x0 }, + { 0x00DB6FFF, 0x0005000F, 0x0 }, + { 0x00BEEFFF, 0x000A000C, 0x0 }, + { 0x00FFFFFF, 0x0005000F, 0x0 }, + { 0x00DB6FFF, 0x000A000C, 0x0 }, +}; + +static const struct ddi_buf_trans bdw_ddi_translations_dp[] = { + { 0x00FFFFFF, 0x0007000E, 0x0 }, + { 0x00D75FFF, 0x000E000A, 0x0 }, + { 0x00BEFFFF, 0x00140006, 0x0 }, + { 0x80B2CFFF, 0x001B0002, 0x0 }, + { 0x00FFFFFF, 0x000E000A, 0x0 }, + { 0x00DB6FFF, 0x00160005, 0x0 }, + { 0x80C71FFF, 0x001A0002, 0x0 }, + { 0x00F7DFFF, 0x00180004, 0x0 }, + { 0x80D75FFF, 0x001B0002, 0x0 }, +}; + +static const struct ddi_buf_trans bdw_ddi_translations_fdi[] = { + { 0x00FFFFFF, 0x0001000E, 0x0 }, + { 0x00D75FFF, 0x0004000A, 0x0 }, + { 0x00C30FFF, 0x00070006, 0x0 }, + { 0x00AAAFFF, 0x000C0000, 0x0 }, + { 0x00FFFFFF, 0x0004000A, 0x0 }, + { 0x00D75FFF, 0x00090004, 0x0 }, + { 0x00C30FFF, 0x000C0000, 0x0 }, + { 0x00FFFFFF, 0x00070006, 0x0 }, + { 0x00D75FFF, 0x000C0000, 0x0 }, +}; + +static const struct ddi_buf_trans bdw_ddi_translations_hdmi[] = { + /* Idx NT mV d T mV df db */ + { 0x00FFFFFF, 0x0007000E, 0x0 },/* 0: 400 400 0 */ + { 0x00D75FFF, 0x000E000A, 0x0 },/* 1: 400 600 3.5 */ + { 0x00BEFFFF, 0x00140006, 0x0 },/* 2: 400 800 6 */ + { 0x00FFFFFF, 0x0009000D, 0x0 },/* 3: 450 450 0 */ + { 0x00FFFFFF, 0x000E000A, 0x0 },/* 4: 600 600 0 */ + { 0x00D7FFFF, 0x00140006, 0x0 },/* 5: 600 800 2.5 */ + { 0x80CB2FFF, 0x001B0002, 0x0 },/* 6: 600 1000 4.5 */ + { 0x00FFFFFF, 0x00140006, 0x0 },/* 7: 800 800 0 */ + { 0x80E79FFF, 0x001B0002, 0x0 },/* 8: 800 1000 2 */ + { 0x80FFFFFF, 0x001B0002, 0x0 },/* 9: 1000 1000 0 */ +}; + +/* Skylake H and S */ +static const struct ddi_buf_trans skl_ddi_translations_dp[] = { + { 0x00002016, 0x000000A0, 0x0 }, + { 0x00005012, 0x0000009B, 0x0 }, + { 0x00007011, 0x00000088, 0x0 }, + { 0x80009010, 0x000000C0, 0x1 }, + { 0x00002016, 0x0000009B, 0x0 }, + { 0x00005012, 0x00000088, 0x0 }, + { 0x80007011, 0x000000C0, 0x1 }, + { 0x00002016, 0x000000DF, 0x0 }, + { 0x80005012, 0x000000C0, 0x1 }, +}; + +/* Skylake U */ +static const struct ddi_buf_trans skl_u_ddi_translations_dp[] = { + { 0x0000201B, 0x000000A2, 0x0 }, + { 0x00005012, 0x00000088, 0x0 }, + { 0x80007011, 0x000000CD, 0x1 }, + { 0x80009010, 0x000000C0, 0x1 }, + { 0x0000201B, 0x0000009D, 0x0 }, + { 0x80005012, 0x000000C0, 0x1 }, + { 0x80007011, 0x000000C0, 0x1 }, + { 0x00002016, 0x00000088, 0x0 }, + { 0x80005012, 0x000000C0, 0x1 }, +}; + +/* Skylake Y */ +static const struct ddi_buf_trans skl_y_ddi_translations_dp[] = { + { 0x00000018, 0x000000A2, 0x0 }, + { 0x00005012, 0x00000088, 0x0 }, + { 0x80007011, 0x000000CD, 0x3 }, + { 0x80009010, 0x000000C0, 0x3 }, + { 0x00000018, 0x0000009D, 0x0 }, + { 0x80005012, 0x000000C0, 0x3 }, + { 0x80007011, 0x000000C0, 0x3 }, + { 0x00000018, 0x00000088, 0x0 }, + { 0x80005012, 0x000000C0, 0x3 }, +}; + +/* Kabylake H and S */ +static const struct ddi_buf_trans kbl_ddi_translations_dp[] = { + { 0x00002016, 0x000000A0, 0x0 }, + { 0x00005012, 0x0000009B, 0x0 }, + { 0x00007011, 0x00000088, 0x0 }, + { 0x80009010, 0x000000C0, 0x1 }, + { 0x00002016, 0x0000009B, 0x0 }, + { 0x00005012, 0x00000088, 0x0 }, + { 0x80007011, 0x000000C0, 0x1 }, + { 0x00002016, 0x00000097, 0x0 }, + { 0x80005012, 0x000000C0, 0x1 }, +}; + +/* Kabylake U */ +static const struct ddi_buf_trans kbl_u_ddi_translations_dp[] = { + { 0x0000201B, 0x000000A1, 0x0 }, + { 0x00005012, 0x00000088, 0x0 }, + { 0x80007011, 0x000000CD, 0x3 }, + { 0x80009010, 0x000000C0, 0x3 }, + { 0x0000201B, 0x0000009D, 0x0 }, + { 0x80005012, 0x000000C0, 0x3 }, + { 0x80007011, 0x000000C0, 0x3 }, + { 0x00002016, 0x0000004F, 0x0 }, + { 0x80005012, 0x000000C0, 0x3 }, +}; + +/* Kabylake Y */ +static const struct ddi_buf_trans kbl_y_ddi_translations_dp[] = { + { 0x00001017, 0x000000A1, 0x0 }, + { 0x00005012, 0x00000088, 0x0 }, + { 0x80007011, 0x000000CD, 0x3 }, + { 0x8000800F, 0x000000C0, 0x3 }, + { 0x00001017, 0x0000009D, 0x0 }, + { 0x80005012, 0x000000C0, 0x3 }, + { 0x80007011, 0x000000C0, 0x3 }, + { 0x00001017, 0x0000004C, 0x0 }, + { 0x80005012, 0x000000C0, 0x3 }, +}; + +/* + * Skylake/Kabylake H and S + * eDP 1.4 low vswing translation parameters + */ +static const struct ddi_buf_trans skl_ddi_translations_edp[] = { + { 0x00000018, 0x000000A8, 0x0 }, + { 0x00004013, 0x000000A9, 0x0 }, + { 0x00007011, 0x000000A2, 0x0 }, + { 0x00009010, 0x0000009C, 0x0 }, + { 0x00000018, 0x000000A9, 0x0 }, + { 0x00006013, 0x000000A2, 0x0 }, + { 0x00007011, 0x000000A6, 0x0 }, + { 0x00000018, 0x000000AB, 0x0 }, + { 0x00007013, 0x0000009F, 0x0 }, + { 0x00000018, 0x000000DF, 0x0 }, +}; + +/* + * Skylake/Kabylake U + * eDP 1.4 low vswing translation parameters + */ +static const struct ddi_buf_trans skl_u_ddi_translations_edp[] = { + { 0x00000018, 0x000000A8, 0x0 }, + { 0x00004013, 0x000000A9, 0x0 }, + { 0x00007011, 0x000000A2, 0x0 }, + { 0x00009010, 0x0000009C, 0x0 }, + { 0x00000018, 0x000000A9, 0x0 }, + { 0x00006013, 0x000000A2, 0x0 }, + { 0x00007011, 0x000000A6, 0x0 }, + { 0x00002016, 0x000000AB, 0x0 }, + { 0x00005013, 0x0000009F, 0x0 }, + { 0x00000018, 0x000000DF, 0x0 }, +}; + +/* + * Skylake/Kabylake Y + * eDP 1.4 low vswing translation parameters + */ +static const struct ddi_buf_trans skl_y_ddi_translations_edp[] = { + { 0x00000018, 0x000000A8, 0x0 }, + { 0x00004013, 0x000000AB, 0x0 }, + { 0x00007011, 0x000000A4, 0x0 }, + { 0x00009010, 0x000000DF, 0x0 }, + { 0x00000018, 0x000000AA, 0x0 }, + { 0x00006013, 0x000000A4, 0x0 }, + { 0x00007011, 0x0000009D, 0x0 }, + { 0x00000018, 0x000000A0, 0x0 }, + { 0x00006012, 0x000000DF, 0x0 }, + { 0x00000018, 0x0000008A, 0x0 }, +}; + +/* Skylake/Kabylake U, H and S */ +static const struct ddi_buf_trans skl_ddi_translations_hdmi[] = { + { 0x00000018, 0x000000AC, 0x0 }, + { 0x00005012, 0x0000009D, 0x0 }, + { 0x00007011, 0x00000088, 0x0 }, + { 0x00000018, 0x000000A1, 0x0 }, + { 0x00000018, 0x00000098, 0x0 }, + { 0x00004013, 0x00000088, 0x0 }, + { 0x80006012, 0x000000CD, 0x1 }, + { 0x00000018, 0x000000DF, 0x0 }, + { 0x80003015, 0x000000CD, 0x1 }, /* Default */ + { 0x80003015, 0x000000C0, 0x1 }, + { 0x80000018, 0x000000C0, 0x1 }, +}; + +/* Skylake/Kabylake Y */ +static const struct ddi_buf_trans skl_y_ddi_translations_hdmi[] = { + { 0x00000018, 0x000000A1, 0x0 }, + { 0x00005012, 0x000000DF, 0x0 }, + { 0x80007011, 0x000000CB, 0x3 }, + { 0x00000018, 0x000000A4, 0x0 }, + { 0x00000018, 0x0000009D, 0x0 }, + { 0x00004013, 0x00000080, 0x0 }, + { 0x80006013, 0x000000C0, 0x3 }, + { 0x00000018, 0x0000008A, 0x0 }, + { 0x80003015, 0x000000C0, 0x3 }, /* Default */ + { 0x80003015, 0x000000C0, 0x3 }, + { 0x80000018, 0x000000C0, 0x3 }, +}; + +struct bxt_ddi_buf_trans { + u8 margin; /* swing value */ + u8 scale; /* scale value */ + u8 enable; /* scale enable */ + u8 deemphasis; +}; + +static const struct bxt_ddi_buf_trans bxt_ddi_translations_dp[] = { + /* Idx NT mV diff db */ + { 52, 0x9A, 0, 128, }, /* 0: 400 0 */ + { 78, 0x9A, 0, 85, }, /* 1: 400 3.5 */ + { 104, 0x9A, 0, 64, }, /* 2: 400 6 */ + { 154, 0x9A, 0, 43, }, /* 3: 400 9.5 */ + { 77, 0x9A, 0, 128, }, /* 4: 600 0 */ + { 116, 0x9A, 0, 85, }, /* 5: 600 3.5 */ + { 154, 0x9A, 0, 64, }, /* 6: 600 6 */ + { 102, 0x9A, 0, 128, }, /* 7: 800 0 */ + { 154, 0x9A, 0, 85, }, /* 8: 800 3.5 */ + { 154, 0x9A, 1, 128, }, /* 9: 1200 0 */ +}; + +static const struct bxt_ddi_buf_trans bxt_ddi_translations_edp[] = { + /* Idx NT mV diff db */ + { 26, 0, 0, 128, }, /* 0: 200 0 */ + { 38, 0, 0, 112, }, /* 1: 200 1.5 */ + { 48, 0, 0, 96, }, /* 2: 200 4 */ + { 54, 0, 0, 69, }, /* 3: 200 6 */ + { 32, 0, 0, 128, }, /* 4: 250 0 */ + { 48, 0, 0, 104, }, /* 5: 250 1.5 */ + { 54, 0, 0, 85, }, /* 6: 250 4 */ + { 43, 0, 0, 128, }, /* 7: 300 0 */ + { 54, 0, 0, 101, }, /* 8: 300 1.5 */ + { 48, 0, 0, 128, }, /* 9: 300 0 */ +}; + +/* BSpec has 2 recommended values - entries 0 and 8. + * Using the entry with higher vswing. + */ +static const struct bxt_ddi_buf_trans bxt_ddi_translations_hdmi[] = { + /* Idx NT mV diff db */ + { 52, 0x9A, 0, 128, }, /* 0: 400 0 */ + { 52, 0x9A, 0, 85, }, /* 1: 400 3.5 */ + { 52, 0x9A, 0, 64, }, /* 2: 400 6 */ + { 42, 0x9A, 0, 43, }, /* 3: 400 9.5 */ + { 77, 0x9A, 0, 128, }, /* 4: 600 0 */ + { 77, 0x9A, 0, 85, }, /* 5: 600 3.5 */ + { 77, 0x9A, 0, 64, }, /* 6: 600 6 */ + { 102, 0x9A, 0, 128, }, /* 7: 800 0 */ + { 102, 0x9A, 0, 85, }, /* 8: 800 3.5 */ + { 154, 0x9A, 1, 128, }, /* 9: 1200 0 */ +}; + +struct cnl_ddi_buf_trans { + u8 dw2_swing_sel; + u8 dw7_n_scalar; + u8 dw4_cursor_coeff; + u8 dw4_post_cursor_2; + u8 dw4_post_cursor_1; +}; + +/* Voltage Swing Programming for VccIO 0.85V for DP */ +static const struct cnl_ddi_buf_trans cnl_ddi_translations_dp_0_85V[] = { + /* NT mV Trans mV db */ + { 0xA, 0x5D, 0x3F, 0x00, 0x00 }, /* 350 350 0.0 */ + { 0xA, 0x6A, 0x38, 0x00, 0x07 }, /* 350 500 3.1 */ + { 0xB, 0x7A, 0x32, 0x00, 0x0D }, /* 350 700 6.0 */ + { 0x6, 0x7C, 0x2D, 0x00, 0x12 }, /* 350 900 8.2 */ + { 0xA, 0x69, 0x3F, 0x00, 0x00 }, /* 500 500 0.0 */ + { 0xB, 0x7A, 0x36, 0x00, 0x09 }, /* 500 700 2.9 */ + { 0x6, 0x7C, 0x30, 0x00, 0x0F }, /* 500 900 5.1 */ + { 0xB, 0x7D, 0x3C, 0x00, 0x03 }, /* 650 725 0.9 */ + { 0x6, 0x7C, 0x34, 0x00, 0x0B }, /* 600 900 3.5 */ + { 0x6, 0x7B, 0x3F, 0x00, 0x00 }, /* 900 900 0.0 */ +}; + +/* Voltage Swing Programming for VccIO 0.85V for HDMI */ +static const struct cnl_ddi_buf_trans cnl_ddi_translations_hdmi_0_85V[] = { + /* NT mV Trans mV db */ + { 0xA, 0x60, 0x3F, 0x00, 0x00 }, /* 450 450 0.0 */ + { 0xB, 0x73, 0x36, 0x00, 0x09 }, /* 450 650 3.2 */ + { 0x6, 0x7F, 0x31, 0x00, 0x0E }, /* 450 850 5.5 */ + { 0xB, 0x73, 0x3F, 0x00, 0x00 }, /* 650 650 0.0 */ + { 0x6, 0x7F, 0x37, 0x00, 0x08 }, /* 650 850 2.3 */ + { 0x6, 0x7F, 0x3F, 0x00, 0x00 }, /* 850 850 0.0 */ + { 0x6, 0x7F, 0x35, 0x00, 0x0A }, /* 600 850 3.0 */ +}; + +/* Voltage Swing Programming for VccIO 0.85V for eDP */ +static const struct cnl_ddi_buf_trans cnl_ddi_translations_edp_0_85V[] = { + /* NT mV Trans mV db */ + { 0xA, 0x66, 0x3A, 0x00, 0x05 }, /* 384 500 2.3 */ + { 0x0, 0x7F, 0x38, 0x00, 0x07 }, /* 153 200 2.3 */ + { 0x8, 0x7F, 0x38, 0x00, 0x07 }, /* 192 250 2.3 */ + { 0x1, 0x7F, 0x38, 0x00, 0x07 }, /* 230 300 2.3 */ + { 0x9, 0x7F, 0x38, 0x00, 0x07 }, /* 269 350 2.3 */ + { 0xA, 0x66, 0x3C, 0x00, 0x03 }, /* 446 500 1.0 */ + { 0xB, 0x70, 0x3C, 0x00, 0x03 }, /* 460 600 2.3 */ + { 0xC, 0x75, 0x3C, 0x00, 0x03 }, /* 537 700 2.3 */ + { 0x2, 0x7F, 0x3F, 0x00, 0x00 }, /* 400 400 0.0 */ +}; + +/* Voltage Swing Programming for VccIO 0.95V for DP */ +static const struct cnl_ddi_buf_trans cnl_ddi_translations_dp_0_95V[] = { + /* NT mV Trans mV db */ + { 0xA, 0x5D, 0x3F, 0x00, 0x00 }, /* 350 350 0.0 */ + { 0xA, 0x6A, 0x38, 0x00, 0x07 }, /* 350 500 3.1 */ + { 0xB, 0x7A, 0x32, 0x00, 0x0D }, /* 350 700 6.0 */ + { 0x6, 0x7C, 0x2D, 0x00, 0x12 }, /* 350 900 8.2 */ + { 0xA, 0x69, 0x3F, 0x00, 0x00 }, /* 500 500 0.0 */ + { 0xB, 0x7A, 0x36, 0x00, 0x09 }, /* 500 700 2.9 */ + { 0x6, 0x7C, 0x30, 0x00, 0x0F }, /* 500 900 5.1 */ + { 0xB, 0x7D, 0x3C, 0x00, 0x03 }, /* 650 725 0.9 */ + { 0x6, 0x7C, 0x34, 0x00, 0x0B }, /* 600 900 3.5 */ + { 0x6, 0x7B, 0x3F, 0x00, 0x00 }, /* 900 900 0.0 */ +}; + +/* Voltage Swing Programming for VccIO 0.95V for HDMI */ +static const struct cnl_ddi_buf_trans cnl_ddi_translations_hdmi_0_95V[] = { + /* NT mV Trans mV db */ + { 0xA, 0x5C, 0x3F, 0x00, 0x00 }, /* 400 400 0.0 */ + { 0xB, 0x69, 0x37, 0x00, 0x08 }, /* 400 600 3.5 */ + { 0x5, 0x76, 0x31, 0x00, 0x0E }, /* 400 800 6.0 */ + { 0xA, 0x5E, 0x3F, 0x00, 0x00 }, /* 450 450 0.0 */ + { 0xB, 0x69, 0x3F, 0x00, 0x00 }, /* 600 600 0.0 */ + { 0xB, 0x79, 0x35, 0x00, 0x0A }, /* 600 850 3.0 */ + { 0x6, 0x7D, 0x32, 0x00, 0x0D }, /* 600 1000 4.4 */ + { 0x5, 0x76, 0x3F, 0x00, 0x00 }, /* 800 800 0.0 */ + { 0x6, 0x7D, 0x39, 0x00, 0x06 }, /* 800 1000 1.9 */ + { 0x6, 0x7F, 0x39, 0x00, 0x06 }, /* 850 1050 1.8 */ + { 0x6, 0x7F, 0x3F, 0x00, 0x00 }, /* 1050 1050 0.0 */ +}; + +/* Voltage Swing Programming for VccIO 0.95V for eDP */ +static const struct cnl_ddi_buf_trans cnl_ddi_translations_edp_0_95V[] = { + /* NT mV Trans mV db */ + { 0xA, 0x61, 0x3A, 0x00, 0x05 }, /* 384 500 2.3 */ + { 0x0, 0x7F, 0x38, 0x00, 0x07 }, /* 153 200 2.3 */ + { 0x8, 0x7F, 0x38, 0x00, 0x07 }, /* 192 250 2.3 */ + { 0x1, 0x7F, 0x38, 0x00, 0x07 }, /* 230 300 2.3 */ + { 0x9, 0x7F, 0x38, 0x00, 0x07 }, /* 269 350 2.3 */ + { 0xA, 0x61, 0x3C, 0x00, 0x03 }, /* 446 500 1.0 */ + { 0xB, 0x68, 0x39, 0x00, 0x06 }, /* 460 600 2.3 */ + { 0xC, 0x6E, 0x39, 0x00, 0x06 }, /* 537 700 2.3 */ + { 0x4, 0x7F, 0x3A, 0x00, 0x05 }, /* 460 600 2.3 */ + { 0x2, 0x7F, 0x3F, 0x00, 0x00 }, /* 400 400 0.0 */ +}; + +/* Voltage Swing Programming for VccIO 1.05V for DP */ +static const struct cnl_ddi_buf_trans cnl_ddi_translations_dp_1_05V[] = { + /* NT mV Trans mV db */ + { 0xA, 0x58, 0x3F, 0x00, 0x00 }, /* 400 400 0.0 */ + { 0xB, 0x64, 0x37, 0x00, 0x08 }, /* 400 600 3.5 */ + { 0x5, 0x70, 0x31, 0x00, 0x0E }, /* 400 800 6.0 */ + { 0x6, 0x7F, 0x2C, 0x00, 0x13 }, /* 400 1050 8.4 */ + { 0xB, 0x64, 0x3F, 0x00, 0x00 }, /* 600 600 0.0 */ + { 0x5, 0x73, 0x35, 0x00, 0x0A }, /* 600 850 3.0 */ + { 0x6, 0x7F, 0x30, 0x00, 0x0F }, /* 550 1050 5.6 */ + { 0x5, 0x76, 0x3E, 0x00, 0x01 }, /* 850 900 0.5 */ + { 0x6, 0x7F, 0x36, 0x00, 0x09 }, /* 750 1050 2.9 */ + { 0x6, 0x7F, 0x3F, 0x00, 0x00 }, /* 1050 1050 0.0 */ +}; + +/* Voltage Swing Programming for VccIO 1.05V for HDMI */ +static const struct cnl_ddi_buf_trans cnl_ddi_translations_hdmi_1_05V[] = { + /* NT mV Trans mV db */ + { 0xA, 0x58, 0x3F, 0x00, 0x00 }, /* 400 400 0.0 */ + { 0xB, 0x64, 0x37, 0x00, 0x08 }, /* 400 600 3.5 */ + { 0x5, 0x70, 0x31, 0x00, 0x0E }, /* 400 800 6.0 */ + { 0xA, 0x5B, 0x3F, 0x00, 0x00 }, /* 450 450 0.0 */ + { 0xB, 0x64, 0x3F, 0x00, 0x00 }, /* 600 600 0.0 */ + { 0x5, 0x73, 0x35, 0x00, 0x0A }, /* 600 850 3.0 */ + { 0x6, 0x7C, 0x32, 0x00, 0x0D }, /* 600 1000 4.4 */ + { 0x5, 0x70, 0x3F, 0x00, 0x00 }, /* 800 800 0.0 */ + { 0x6, 0x7C, 0x39, 0x00, 0x06 }, /* 800 1000 1.9 */ + { 0x6, 0x7F, 0x39, 0x00, 0x06 }, /* 850 1050 1.8 */ + { 0x6, 0x7F, 0x3F, 0x00, 0x00 }, /* 1050 1050 0.0 */ +}; + +/* Voltage Swing Programming for VccIO 1.05V for eDP */ +static const struct cnl_ddi_buf_trans cnl_ddi_translations_edp_1_05V[] = { + /* NT mV Trans mV db */ + { 0xA, 0x5E, 0x3A, 0x00, 0x05 }, /* 384 500 2.3 */ + { 0x0, 0x7F, 0x38, 0x00, 0x07 }, /* 153 200 2.3 */ + { 0x8, 0x7F, 0x38, 0x00, 0x07 }, /* 192 250 2.3 */ + { 0x1, 0x7F, 0x38, 0x00, 0x07 }, /* 230 300 2.3 */ + { 0x9, 0x7F, 0x38, 0x00, 0x07 }, /* 269 350 2.3 */ + { 0xA, 0x5E, 0x3C, 0x00, 0x03 }, /* 446 500 1.0 */ + { 0xB, 0x64, 0x39, 0x00, 0x06 }, /* 460 600 2.3 */ + { 0xE, 0x6A, 0x39, 0x00, 0x06 }, /* 537 700 2.3 */ + { 0x2, 0x7F, 0x3F, 0x00, 0x00 }, /* 400 400 0.0 */ +}; + +/* icl_combo_phy_ddi_translations */ +static const struct cnl_ddi_buf_trans icl_combo_phy_ddi_translations_dp_hbr2[] = { + /* NT mV Trans mV db */ + { 0xA, 0x35, 0x3F, 0x00, 0x00 }, /* 350 350 0.0 */ + { 0xA, 0x4F, 0x37, 0x00, 0x08 }, /* 350 500 3.1 */ + { 0xC, 0x71, 0x2F, 0x00, 0x10 }, /* 350 700 6.0 */ + { 0x6, 0x7F, 0x2B, 0x00, 0x14 }, /* 350 900 8.2 */ + { 0xA, 0x4C, 0x3F, 0x00, 0x00 }, /* 500 500 0.0 */ + { 0xC, 0x73, 0x34, 0x00, 0x0B }, /* 500 700 2.9 */ + { 0x6, 0x7F, 0x2F, 0x00, 0x10 }, /* 500 900 5.1 */ + { 0xC, 0x6C, 0x3C, 0x00, 0x03 }, /* 650 700 0.6 */ + { 0x6, 0x7F, 0x35, 0x00, 0x0A }, /* 600 900 3.5 */ + { 0x6, 0x7F, 0x3F, 0x00, 0x00 }, /* 900 900 0.0 */ +}; + +static const struct cnl_ddi_buf_trans icl_combo_phy_ddi_translations_edp_hbr2[] = { + /* NT mV Trans mV db */ + { 0x0, 0x7F, 0x3F, 0x00, 0x00 }, /* 200 200 0.0 */ + { 0x8, 0x7F, 0x38, 0x00, 0x07 }, /* 200 250 1.9 */ + { 0x1, 0x7F, 0x33, 0x00, 0x0C }, /* 200 300 3.5 */ + { 0x9, 0x7F, 0x31, 0x00, 0x0E }, /* 200 350 4.9 */ + { 0x8, 0x7F, 0x3F, 0x00, 0x00 }, /* 250 250 0.0 */ + { 0x1, 0x7F, 0x38, 0x00, 0x07 }, /* 250 300 1.6 */ + { 0x9, 0x7F, 0x35, 0x00, 0x0A }, /* 250 350 2.9 */ + { 0x1, 0x7F, 0x3F, 0x00, 0x00 }, /* 300 300 0.0 */ + { 0x9, 0x7F, 0x38, 0x00, 0x07 }, /* 300 350 1.3 */ + { 0x9, 0x7F, 0x3F, 0x00, 0x00 }, /* 350 350 0.0 */ +}; + +static const struct cnl_ddi_buf_trans icl_combo_phy_ddi_translations_edp_hbr3[] = { + /* NT mV Trans mV db */ + { 0xA, 0x35, 0x3F, 0x00, 0x00 }, /* 350 350 0.0 */ + { 0xA, 0x4F, 0x37, 0x00, 0x08 }, /* 350 500 3.1 */ + { 0xC, 0x71, 0x2F, 0x00, 0x10 }, /* 350 700 6.0 */ + { 0x6, 0x7F, 0x2B, 0x00, 0x14 }, /* 350 900 8.2 */ + { 0xA, 0x4C, 0x3F, 0x00, 0x00 }, /* 500 500 0.0 */ + { 0xC, 0x73, 0x34, 0x00, 0x0B }, /* 500 700 2.9 */ + { 0x6, 0x7F, 0x2F, 0x00, 0x10 }, /* 500 900 5.1 */ + { 0xC, 0x6C, 0x3C, 0x00, 0x03 }, /* 650 700 0.6 */ + { 0x6, 0x7F, 0x35, 0x00, 0x0A }, /* 600 900 3.5 */ + { 0x6, 0x7F, 0x3F, 0x00, 0x00 }, /* 900 900 0.0 */ +}; + +static const struct cnl_ddi_buf_trans icl_combo_phy_ddi_translations_hdmi[] = { + /* NT mV Trans mV db */ + { 0xA, 0x60, 0x3F, 0x00, 0x00 }, /* 450 450 0.0 */ + { 0xB, 0x73, 0x36, 0x00, 0x09 }, /* 450 650 3.2 */ + { 0x6, 0x7F, 0x31, 0x00, 0x0E }, /* 450 850 5.5 */ + { 0xB, 0x73, 0x3F, 0x00, 0x00 }, /* 650 650 0.0 ALS */ + { 0x6, 0x7F, 0x37, 0x00, 0x08 }, /* 650 850 2.3 */ + { 0x6, 0x7F, 0x3F, 0x00, 0x00 }, /* 850 850 0.0 */ + { 0x6, 0x7F, 0x35, 0x00, 0x0A }, /* 600 850 3.0 */ +}; + +struct icl_mg_phy_ddi_buf_trans { + u32 cri_txdeemph_override_5_0; + u32 cri_txdeemph_override_11_6; + u32 cri_txdeemph_override_17_12; +}; + +static const struct icl_mg_phy_ddi_buf_trans icl_mg_phy_ddi_translations[] = { + /* Voltage swing pre-emphasis */ + { 0x0, 0x1B, 0x00 }, /* 0 0 */ + { 0x0, 0x23, 0x08 }, /* 0 1 */ + { 0x0, 0x2D, 0x12 }, /* 0 2 */ + { 0x0, 0x00, 0x00 }, /* 0 3 */ + { 0x0, 0x23, 0x00 }, /* 1 0 */ + { 0x0, 0x2B, 0x09 }, /* 1 1 */ + { 0x0, 0x2E, 0x11 }, /* 1 2 */ + { 0x0, 0x2F, 0x00 }, /* 2 0 */ + { 0x0, 0x33, 0x0C }, /* 2 1 */ + { 0x0, 0x00, 0x00 }, /* 3 0 */ +}; + +static const struct ddi_buf_trans * +bdw_get_buf_trans_edp(struct drm_i915_private *dev_priv, int *n_entries) +{ + if (dev_priv->vbt.edp.low_vswing) { + *n_entries = ARRAY_SIZE(bdw_ddi_translations_edp); + return bdw_ddi_translations_edp; + } else { + *n_entries = ARRAY_SIZE(bdw_ddi_translations_dp); + return bdw_ddi_translations_dp; + } +} + +static const struct ddi_buf_trans * +skl_get_buf_trans_dp(struct drm_i915_private *dev_priv, int *n_entries) +{ + if (IS_SKL_ULX(dev_priv)) { + *n_entries = ARRAY_SIZE(skl_y_ddi_translations_dp); + return skl_y_ddi_translations_dp; + } else if (IS_SKL_ULT(dev_priv)) { + *n_entries = ARRAY_SIZE(skl_u_ddi_translations_dp); + return skl_u_ddi_translations_dp; + } else { + *n_entries = ARRAY_SIZE(skl_ddi_translations_dp); + return skl_ddi_translations_dp; + } +} + +static const struct ddi_buf_trans * +kbl_get_buf_trans_dp(struct drm_i915_private *dev_priv, int *n_entries) +{ + if (IS_KBL_ULX(dev_priv) || IS_CFL_ULX(dev_priv)) { + *n_entries = ARRAY_SIZE(kbl_y_ddi_translations_dp); + return kbl_y_ddi_translations_dp; + } else if (IS_KBL_ULT(dev_priv) || IS_CFL_ULT(dev_priv)) { + *n_entries = ARRAY_SIZE(kbl_u_ddi_translations_dp); + return kbl_u_ddi_translations_dp; + } else { + *n_entries = ARRAY_SIZE(kbl_ddi_translations_dp); + return kbl_ddi_translations_dp; + } +} + +static const struct ddi_buf_trans * +skl_get_buf_trans_edp(struct drm_i915_private *dev_priv, int *n_entries) +{ + if (dev_priv->vbt.edp.low_vswing) { + if (IS_SKL_ULX(dev_priv) || IS_KBL_ULX(dev_priv) || + IS_CFL_ULX(dev_priv)) { + *n_entries = ARRAY_SIZE(skl_y_ddi_translations_edp); + return skl_y_ddi_translations_edp; + } else if (IS_SKL_ULT(dev_priv) || IS_KBL_ULT(dev_priv) || + IS_CFL_ULT(dev_priv)) { + *n_entries = ARRAY_SIZE(skl_u_ddi_translations_edp); + return skl_u_ddi_translations_edp; + } else { + *n_entries = ARRAY_SIZE(skl_ddi_translations_edp); + return skl_ddi_translations_edp; + } + } + + if (IS_KABYLAKE(dev_priv) || IS_COFFEELAKE(dev_priv)) + return kbl_get_buf_trans_dp(dev_priv, n_entries); + else + return skl_get_buf_trans_dp(dev_priv, n_entries); +} + +static const struct ddi_buf_trans * +skl_get_buf_trans_hdmi(struct drm_i915_private *dev_priv, int *n_entries) +{ + if (IS_SKL_ULX(dev_priv) || IS_KBL_ULX(dev_priv) || + IS_CFL_ULX(dev_priv)) { + *n_entries = ARRAY_SIZE(skl_y_ddi_translations_hdmi); + return skl_y_ddi_translations_hdmi; + } else { + *n_entries = ARRAY_SIZE(skl_ddi_translations_hdmi); + return skl_ddi_translations_hdmi; + } +} + +static int skl_buf_trans_num_entries(enum port port, int n_entries) +{ + /* Only DDIA and DDIE can select the 10th register with DP */ + if (port == PORT_A || port == PORT_E) + return min(n_entries, 10); + else + return min(n_entries, 9); +} + +static const struct ddi_buf_trans * +intel_ddi_get_buf_trans_dp(struct drm_i915_private *dev_priv, + enum port port, int *n_entries) +{ + if (IS_KABYLAKE(dev_priv) || IS_COFFEELAKE(dev_priv)) { + const struct ddi_buf_trans *ddi_translations = + kbl_get_buf_trans_dp(dev_priv, n_entries); + *n_entries = skl_buf_trans_num_entries(port, *n_entries); + return ddi_translations; + } else if (IS_SKYLAKE(dev_priv)) { + const struct ddi_buf_trans *ddi_translations = + skl_get_buf_trans_dp(dev_priv, n_entries); + *n_entries = skl_buf_trans_num_entries(port, *n_entries); + return ddi_translations; + } else if (IS_BROADWELL(dev_priv)) { + *n_entries = ARRAY_SIZE(bdw_ddi_translations_dp); + return bdw_ddi_translations_dp; + } else if (IS_HASWELL(dev_priv)) { + *n_entries = ARRAY_SIZE(hsw_ddi_translations_dp); + return hsw_ddi_translations_dp; + } + + *n_entries = 0; + return NULL; +} + +static const struct ddi_buf_trans * +intel_ddi_get_buf_trans_edp(struct drm_i915_private *dev_priv, + enum port port, int *n_entries) +{ + if (IS_GEN9_BC(dev_priv)) { + const struct ddi_buf_trans *ddi_translations = + skl_get_buf_trans_edp(dev_priv, n_entries); + *n_entries = skl_buf_trans_num_entries(port, *n_entries); + return ddi_translations; + } else if (IS_BROADWELL(dev_priv)) { + return bdw_get_buf_trans_edp(dev_priv, n_entries); + } else if (IS_HASWELL(dev_priv)) { + *n_entries = ARRAY_SIZE(hsw_ddi_translations_dp); + return hsw_ddi_translations_dp; + } + + *n_entries = 0; + return NULL; +} + +static const struct ddi_buf_trans * +intel_ddi_get_buf_trans_fdi(struct drm_i915_private *dev_priv, + int *n_entries) +{ + if (IS_BROADWELL(dev_priv)) { + *n_entries = ARRAY_SIZE(bdw_ddi_translations_fdi); + return bdw_ddi_translations_fdi; + } else if (IS_HASWELL(dev_priv)) { + *n_entries = ARRAY_SIZE(hsw_ddi_translations_fdi); + return hsw_ddi_translations_fdi; + } + + *n_entries = 0; + return NULL; +} + +static const struct ddi_buf_trans * +intel_ddi_get_buf_trans_hdmi(struct drm_i915_private *dev_priv, + int *n_entries) +{ + if (IS_GEN9_BC(dev_priv)) { + return skl_get_buf_trans_hdmi(dev_priv, n_entries); + } else if (IS_BROADWELL(dev_priv)) { + *n_entries = ARRAY_SIZE(bdw_ddi_translations_hdmi); + return bdw_ddi_translations_hdmi; + } else if (IS_HASWELL(dev_priv)) { + *n_entries = ARRAY_SIZE(hsw_ddi_translations_hdmi); + return hsw_ddi_translations_hdmi; + } + + *n_entries = 0; + return NULL; +} + +static const struct bxt_ddi_buf_trans * +bxt_get_buf_trans_dp(struct drm_i915_private *dev_priv, int *n_entries) +{ + *n_entries = ARRAY_SIZE(bxt_ddi_translations_dp); + return bxt_ddi_translations_dp; +} + +static const struct bxt_ddi_buf_trans * +bxt_get_buf_trans_edp(struct drm_i915_private *dev_priv, int *n_entries) +{ + if (dev_priv->vbt.edp.low_vswing) { + *n_entries = ARRAY_SIZE(bxt_ddi_translations_edp); + return bxt_ddi_translations_edp; + } + + return bxt_get_buf_trans_dp(dev_priv, n_entries); +} + +static const struct bxt_ddi_buf_trans * +bxt_get_buf_trans_hdmi(struct drm_i915_private *dev_priv, int *n_entries) +{ + *n_entries = ARRAY_SIZE(bxt_ddi_translations_hdmi); + return bxt_ddi_translations_hdmi; +} + +static const struct cnl_ddi_buf_trans * +cnl_get_buf_trans_hdmi(struct drm_i915_private *dev_priv, int *n_entries) +{ + u32 voltage = I915_READ(CNL_PORT_COMP_DW3) & VOLTAGE_INFO_MASK; + + if (voltage == VOLTAGE_INFO_0_85V) { + *n_entries = ARRAY_SIZE(cnl_ddi_translations_hdmi_0_85V); + return cnl_ddi_translations_hdmi_0_85V; + } else if (voltage == VOLTAGE_INFO_0_95V) { + *n_entries = ARRAY_SIZE(cnl_ddi_translations_hdmi_0_95V); + return cnl_ddi_translations_hdmi_0_95V; + } else if (voltage == VOLTAGE_INFO_1_05V) { + *n_entries = ARRAY_SIZE(cnl_ddi_translations_hdmi_1_05V); + return cnl_ddi_translations_hdmi_1_05V; + } else { + *n_entries = 1; /* shut up gcc */ + MISSING_CASE(voltage); + } + return NULL; +} + +static const struct cnl_ddi_buf_trans * +cnl_get_buf_trans_dp(struct drm_i915_private *dev_priv, int *n_entries) +{ + u32 voltage = I915_READ(CNL_PORT_COMP_DW3) & VOLTAGE_INFO_MASK; + + if (voltage == VOLTAGE_INFO_0_85V) { + *n_entries = ARRAY_SIZE(cnl_ddi_translations_dp_0_85V); + return cnl_ddi_translations_dp_0_85V; + } else if (voltage == VOLTAGE_INFO_0_95V) { + *n_entries = ARRAY_SIZE(cnl_ddi_translations_dp_0_95V); + return cnl_ddi_translations_dp_0_95V; + } else if (voltage == VOLTAGE_INFO_1_05V) { + *n_entries = ARRAY_SIZE(cnl_ddi_translations_dp_1_05V); + return cnl_ddi_translations_dp_1_05V; + } else { + *n_entries = 1; /* shut up gcc */ + MISSING_CASE(voltage); + } + return NULL; +} + +static const struct cnl_ddi_buf_trans * +cnl_get_buf_trans_edp(struct drm_i915_private *dev_priv, int *n_entries) +{ + u32 voltage = I915_READ(CNL_PORT_COMP_DW3) & VOLTAGE_INFO_MASK; + + if (dev_priv->vbt.edp.low_vswing) { + if (voltage == VOLTAGE_INFO_0_85V) { + *n_entries = ARRAY_SIZE(cnl_ddi_translations_edp_0_85V); + return cnl_ddi_translations_edp_0_85V; + } else if (voltage == VOLTAGE_INFO_0_95V) { + *n_entries = ARRAY_SIZE(cnl_ddi_translations_edp_0_95V); + return cnl_ddi_translations_edp_0_95V; + } else if (voltage == VOLTAGE_INFO_1_05V) { + *n_entries = ARRAY_SIZE(cnl_ddi_translations_edp_1_05V); + return cnl_ddi_translations_edp_1_05V; + } else { + *n_entries = 1; /* shut up gcc */ + MISSING_CASE(voltage); + } + return NULL; + } else { + return cnl_get_buf_trans_dp(dev_priv, n_entries); + } +} + +static const struct cnl_ddi_buf_trans * +icl_get_combo_buf_trans(struct drm_i915_private *dev_priv, enum port port, + int type, int rate, int *n_entries) +{ + if (type == INTEL_OUTPUT_HDMI) { + *n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_hdmi); + return icl_combo_phy_ddi_translations_hdmi; + } else if (rate > 540000 && type == INTEL_OUTPUT_EDP) { + *n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_edp_hbr3); + return icl_combo_phy_ddi_translations_edp_hbr3; + } else if (type == INTEL_OUTPUT_EDP && dev_priv->vbt.edp.low_vswing) { + *n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_edp_hbr2); + return icl_combo_phy_ddi_translations_edp_hbr2; + } + + *n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_dp_hbr2); + return icl_combo_phy_ddi_translations_dp_hbr2; +} + +static int intel_ddi_hdmi_level(struct drm_i915_private *dev_priv, enum port port) +{ + int n_entries, level, default_entry; + + level = dev_priv->vbt.ddi_port_info[port].hdmi_level_shift; + + if (INTEL_GEN(dev_priv) >= 11) { + if (intel_port_is_combophy(dev_priv, port)) + icl_get_combo_buf_trans(dev_priv, port, INTEL_OUTPUT_HDMI, + 0, &n_entries); + else + n_entries = ARRAY_SIZE(icl_mg_phy_ddi_translations); + default_entry = n_entries - 1; + } else if (IS_CANNONLAKE(dev_priv)) { + cnl_get_buf_trans_hdmi(dev_priv, &n_entries); + default_entry = n_entries - 1; + } else if (IS_GEN9_LP(dev_priv)) { + bxt_get_buf_trans_hdmi(dev_priv, &n_entries); + default_entry = n_entries - 1; + } else if (IS_GEN9_BC(dev_priv)) { + intel_ddi_get_buf_trans_hdmi(dev_priv, &n_entries); + default_entry = 8; + } else if (IS_BROADWELL(dev_priv)) { + intel_ddi_get_buf_trans_hdmi(dev_priv, &n_entries); + default_entry = 7; + } else if (IS_HASWELL(dev_priv)) { + intel_ddi_get_buf_trans_hdmi(dev_priv, &n_entries); + default_entry = 6; + } else { + WARN(1, "ddi translation table missing\n"); + return 0; + } + + /* Choose a good default if VBT is badly populated */ + if (level == HDMI_LEVEL_SHIFT_UNKNOWN || level >= n_entries) + level = default_entry; + + if (WARN_ON_ONCE(n_entries == 0)) + return 0; + if (WARN_ON_ONCE(level >= n_entries)) + level = n_entries - 1; + + return level; +} + +/* + * Starting with Haswell, DDI port buffers must be programmed with correct + * values in advance. This function programs the correct values for + * DP/eDP/FDI use cases. + */ +static void intel_prepare_dp_ddi_buffers(struct intel_encoder *encoder, + const struct intel_crtc_state *crtc_state) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + u32 iboost_bit = 0; + int i, n_entries; + enum port port = encoder->port; + const struct ddi_buf_trans *ddi_translations; + + if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_ANALOG)) + ddi_translations = intel_ddi_get_buf_trans_fdi(dev_priv, + &n_entries); + else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_EDP)) + ddi_translations = intel_ddi_get_buf_trans_edp(dev_priv, port, + &n_entries); + else + ddi_translations = intel_ddi_get_buf_trans_dp(dev_priv, port, + &n_entries); + + /* If we're boosting the current, set bit 31 of trans1 */ + if (IS_GEN9_BC(dev_priv) && + dev_priv->vbt.ddi_port_info[port].dp_boost_level) + iboost_bit = DDI_BUF_BALANCE_LEG_ENABLE; + + for (i = 0; i < n_entries; i++) { + I915_WRITE(DDI_BUF_TRANS_LO(port, i), + ddi_translations[i].trans1 | iboost_bit); + I915_WRITE(DDI_BUF_TRANS_HI(port, i), + ddi_translations[i].trans2); + } +} + +/* + * Starting with Haswell, DDI port buffers must be programmed with correct + * values in advance. This function programs the correct values for + * HDMI/DVI use cases. + */ +static void intel_prepare_hdmi_ddi_buffers(struct intel_encoder *encoder, + int level) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + u32 iboost_bit = 0; + int n_entries; + enum port port = encoder->port; + const struct ddi_buf_trans *ddi_translations; + + ddi_translations = intel_ddi_get_buf_trans_hdmi(dev_priv, &n_entries); + + if (WARN_ON_ONCE(!ddi_translations)) + return; + if (WARN_ON_ONCE(level >= n_entries)) + level = n_entries - 1; + + /* If we're boosting the current, set bit 31 of trans1 */ + if (IS_GEN9_BC(dev_priv) && + dev_priv->vbt.ddi_port_info[port].hdmi_boost_level) + iboost_bit = DDI_BUF_BALANCE_LEG_ENABLE; + + /* Entry 9 is for HDMI: */ + I915_WRITE(DDI_BUF_TRANS_LO(port, 9), + ddi_translations[level].trans1 | iboost_bit); + I915_WRITE(DDI_BUF_TRANS_HI(port, 9), + ddi_translations[level].trans2); +} + +static void intel_wait_ddi_buf_idle(struct drm_i915_private *dev_priv, + enum port port) +{ + i915_reg_t reg = DDI_BUF_CTL(port); + int i; + + for (i = 0; i < 16; i++) { + udelay(1); + if (I915_READ(reg) & DDI_BUF_IS_IDLE) + return; + } + DRM_ERROR("Timeout waiting for DDI BUF %c idle bit\n", port_name(port)); +} + +static u32 hsw_pll_to_ddi_pll_sel(const struct intel_shared_dpll *pll) +{ + switch (pll->info->id) { + case DPLL_ID_WRPLL1: + return PORT_CLK_SEL_WRPLL1; + case DPLL_ID_WRPLL2: + return PORT_CLK_SEL_WRPLL2; + case DPLL_ID_SPLL: + return PORT_CLK_SEL_SPLL; + case DPLL_ID_LCPLL_810: + return PORT_CLK_SEL_LCPLL_810; + case DPLL_ID_LCPLL_1350: + return PORT_CLK_SEL_LCPLL_1350; + case DPLL_ID_LCPLL_2700: + return PORT_CLK_SEL_LCPLL_2700; + default: + MISSING_CASE(pll->info->id); + return PORT_CLK_SEL_NONE; + } +} + +static u32 icl_pll_to_ddi_clk_sel(struct intel_encoder *encoder, + const struct intel_crtc_state *crtc_state) +{ + const struct intel_shared_dpll *pll = crtc_state->shared_dpll; + int clock = crtc_state->port_clock; + const enum intel_dpll_id id = pll->info->id; + + switch (id) { + default: + /* + * DPLL_ID_ICL_DPLL0 and DPLL_ID_ICL_DPLL1 should not be used + * here, so do warn if this get passed in + */ + MISSING_CASE(id); + return DDI_CLK_SEL_NONE; + case DPLL_ID_ICL_TBTPLL: + switch (clock) { + case 162000: + return DDI_CLK_SEL_TBT_162; + case 270000: + return DDI_CLK_SEL_TBT_270; + case 540000: + return DDI_CLK_SEL_TBT_540; + case 810000: + return DDI_CLK_SEL_TBT_810; + default: + MISSING_CASE(clock); + return DDI_CLK_SEL_NONE; + } + case DPLL_ID_ICL_MGPLL1: + case DPLL_ID_ICL_MGPLL2: + case DPLL_ID_ICL_MGPLL3: + case DPLL_ID_ICL_MGPLL4: + return DDI_CLK_SEL_MG; + } +} + +/* Starting with Haswell, different DDI ports can work in FDI mode for + * connection to the PCH-located connectors. For this, it is necessary to train + * both the DDI port and PCH receiver for the desired DDI buffer settings. + * + * The recommended port to work in FDI mode is DDI E, which we use here. Also, + * please note that when FDI mode is active on DDI E, it shares 2 lines with + * DDI A (which is used for eDP) + */ + +void hsw_fdi_link_train(struct intel_crtc *crtc, + const struct intel_crtc_state *crtc_state) +{ + struct drm_device *dev = crtc->base.dev; + struct drm_i915_private *dev_priv = to_i915(dev); + struct intel_encoder *encoder; + u32 temp, i, rx_ctl_val, ddi_pll_sel; + + for_each_encoder_on_crtc(dev, &crtc->base, encoder) { + WARN_ON(encoder->type != INTEL_OUTPUT_ANALOG); + intel_prepare_dp_ddi_buffers(encoder, crtc_state); + } + + /* Set the FDI_RX_MISC pwrdn lanes and the 2 workarounds listed at the + * mode set "sequence for CRT port" document: + * - TP1 to TP2 time with the default value + * - FDI delay to 90h + * + * WaFDIAutoLinkSetTimingOverrride:hsw + */ + I915_WRITE(FDI_RX_MISC(PIPE_A), FDI_RX_PWRDN_LANE1_VAL(2) | + FDI_RX_PWRDN_LANE0_VAL(2) | + FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90); + + /* Enable the PCH Receiver FDI PLL */ + rx_ctl_val = dev_priv->fdi_rx_config | FDI_RX_ENHANCE_FRAME_ENABLE | + FDI_RX_PLL_ENABLE | + FDI_DP_PORT_WIDTH(crtc_state->fdi_lanes); + I915_WRITE(FDI_RX_CTL(PIPE_A), rx_ctl_val); + POSTING_READ(FDI_RX_CTL(PIPE_A)); + udelay(220); + + /* Switch from Rawclk to PCDclk */ + rx_ctl_val |= FDI_PCDCLK; + I915_WRITE(FDI_RX_CTL(PIPE_A), rx_ctl_val); + + /* Configure Port Clock Select */ + ddi_pll_sel = hsw_pll_to_ddi_pll_sel(crtc_state->shared_dpll); + I915_WRITE(PORT_CLK_SEL(PORT_E), ddi_pll_sel); + WARN_ON(ddi_pll_sel != PORT_CLK_SEL_SPLL); + + /* Start the training iterating through available voltages and emphasis, + * testing each value twice. */ + for (i = 0; i < ARRAY_SIZE(hsw_ddi_translations_fdi) * 2; i++) { + /* Configure DP_TP_CTL with auto-training */ + I915_WRITE(DP_TP_CTL(PORT_E), + DP_TP_CTL_FDI_AUTOTRAIN | + DP_TP_CTL_ENHANCED_FRAME_ENABLE | + DP_TP_CTL_LINK_TRAIN_PAT1 | + DP_TP_CTL_ENABLE); + + /* Configure and enable DDI_BUF_CTL for DDI E with next voltage. + * DDI E does not support port reversal, the functionality is + * achieved on the PCH side in FDI_RX_CTL, so no need to set the + * port reversal bit */ + I915_WRITE(DDI_BUF_CTL(PORT_E), + DDI_BUF_CTL_ENABLE | + ((crtc_state->fdi_lanes - 1) << 1) | + DDI_BUF_TRANS_SELECT(i / 2)); + POSTING_READ(DDI_BUF_CTL(PORT_E)); + + udelay(600); + + /* Program PCH FDI Receiver TU */ + I915_WRITE(FDI_RX_TUSIZE1(PIPE_A), TU_SIZE(64)); + + /* Enable PCH FDI Receiver with auto-training */ + rx_ctl_val |= FDI_RX_ENABLE | FDI_LINK_TRAIN_AUTO; + I915_WRITE(FDI_RX_CTL(PIPE_A), rx_ctl_val); + POSTING_READ(FDI_RX_CTL(PIPE_A)); + + /* Wait for FDI receiver lane calibration */ + udelay(30); + + /* Unset FDI_RX_MISC pwrdn lanes */ + temp = I915_READ(FDI_RX_MISC(PIPE_A)); + temp &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK); + I915_WRITE(FDI_RX_MISC(PIPE_A), temp); + POSTING_READ(FDI_RX_MISC(PIPE_A)); + + /* Wait for FDI auto training time */ + udelay(5); + + temp = I915_READ(DP_TP_STATUS(PORT_E)); + if (temp & DP_TP_STATUS_AUTOTRAIN_DONE) { + DRM_DEBUG_KMS("FDI link training done on step %d\n", i); + break; + } + + /* + * Leave things enabled even if we failed to train FDI. + * Results in less fireworks from the state checker. + */ + if (i == ARRAY_SIZE(hsw_ddi_translations_fdi) * 2 - 1) { + DRM_ERROR("FDI link training failed!\n"); + break; + } + + rx_ctl_val &= ~FDI_RX_ENABLE; + I915_WRITE(FDI_RX_CTL(PIPE_A), rx_ctl_val); + POSTING_READ(FDI_RX_CTL(PIPE_A)); + + temp = I915_READ(DDI_BUF_CTL(PORT_E)); + temp &= ~DDI_BUF_CTL_ENABLE; + I915_WRITE(DDI_BUF_CTL(PORT_E), temp); + POSTING_READ(DDI_BUF_CTL(PORT_E)); + + /* Disable DP_TP_CTL and FDI_RX_CTL and retry */ + temp = I915_READ(DP_TP_CTL(PORT_E)); + temp &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK); + temp |= DP_TP_CTL_LINK_TRAIN_PAT1; + I915_WRITE(DP_TP_CTL(PORT_E), temp); + POSTING_READ(DP_TP_CTL(PORT_E)); + + intel_wait_ddi_buf_idle(dev_priv, PORT_E); + + /* Reset FDI_RX_MISC pwrdn lanes */ + temp = I915_READ(FDI_RX_MISC(PIPE_A)); + temp &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK); + temp |= FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2); + I915_WRITE(FDI_RX_MISC(PIPE_A), temp); + POSTING_READ(FDI_RX_MISC(PIPE_A)); + } + + /* Enable normal pixel sending for FDI */ + I915_WRITE(DP_TP_CTL(PORT_E), + DP_TP_CTL_FDI_AUTOTRAIN | + DP_TP_CTL_LINK_TRAIN_NORMAL | + DP_TP_CTL_ENHANCED_FRAME_ENABLE | + DP_TP_CTL_ENABLE); +} + +static void intel_ddi_init_dp_buf_reg(struct intel_encoder *encoder) +{ + struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); + struct intel_digital_port *intel_dig_port = + enc_to_dig_port(&encoder->base); + + intel_dp->DP = intel_dig_port->saved_port_bits | + DDI_BUF_CTL_ENABLE | DDI_BUF_TRANS_SELECT(0); + intel_dp->DP |= DDI_PORT_WIDTH(intel_dp->lane_count); +} + +static struct intel_encoder * +intel_ddi_get_crtc_encoder(struct intel_crtc *crtc) +{ + struct drm_device *dev = crtc->base.dev; + struct intel_encoder *encoder, *ret = NULL; + int num_encoders = 0; + + for_each_encoder_on_crtc(dev, &crtc->base, encoder) { + ret = encoder; + num_encoders++; + } + + if (num_encoders != 1) + WARN(1, "%d encoders on crtc for pipe %c\n", num_encoders, + pipe_name(crtc->pipe)); + + BUG_ON(ret == NULL); + return ret; +} + +static int hsw_ddi_calc_wrpll_link(struct drm_i915_private *dev_priv, + i915_reg_t reg) +{ + int refclk; + int n, p, r; + u32 wrpll; + + wrpll = I915_READ(reg); + switch (wrpll & WRPLL_REF_MASK) { + case WRPLL_REF_SPECIAL_HSW: + /* + * muxed-SSC for BDW. + * non-SSC for non-ULT HSW. Check FUSE_STRAP3 + * for the non-SSC reference frequency. + */ + if (IS_HASWELL(dev_priv) && !IS_HSW_ULT(dev_priv)) { + if (I915_READ(FUSE_STRAP3) & HSW_REF_CLK_SELECT) + refclk = 24; + else + refclk = 135; + break; + } + /* fall through */ + case WRPLL_REF_PCH_SSC: + /* + * We could calculate spread here, but our checking + * code only cares about 5% accuracy, and spread is a max of + * 0.5% downspread. + */ + refclk = 135; + break; + case WRPLL_REF_LCPLL: + refclk = 2700; + break; + default: + MISSING_CASE(wrpll); + return 0; + } + + r = wrpll & WRPLL_DIVIDER_REF_MASK; + p = (wrpll & WRPLL_DIVIDER_POST_MASK) >> WRPLL_DIVIDER_POST_SHIFT; + n = (wrpll & WRPLL_DIVIDER_FB_MASK) >> WRPLL_DIVIDER_FB_SHIFT; + + /* Convert to KHz, p & r have a fixed point portion */ + return (refclk * n * 100) / (p * r); +} + +static int skl_calc_wrpll_link(const struct intel_dpll_hw_state *pll_state) +{ + u32 p0, p1, p2, dco_freq; + + p0 = pll_state->cfgcr2 & DPLL_CFGCR2_PDIV_MASK; + p2 = pll_state->cfgcr2 & DPLL_CFGCR2_KDIV_MASK; + + if (pll_state->cfgcr2 & DPLL_CFGCR2_QDIV_MODE(1)) + p1 = (pll_state->cfgcr2 & DPLL_CFGCR2_QDIV_RATIO_MASK) >> 8; + else + p1 = 1; + + + switch (p0) { + case DPLL_CFGCR2_PDIV_1: + p0 = 1; + break; + case DPLL_CFGCR2_PDIV_2: + p0 = 2; + break; + case DPLL_CFGCR2_PDIV_3: + p0 = 3; + break; + case DPLL_CFGCR2_PDIV_7: + p0 = 7; + break; + } + + switch (p2) { + case DPLL_CFGCR2_KDIV_5: + p2 = 5; + break; + case DPLL_CFGCR2_KDIV_2: + p2 = 2; + break; + case DPLL_CFGCR2_KDIV_3: + p2 = 3; + break; + case DPLL_CFGCR2_KDIV_1: + p2 = 1; + break; + } + + dco_freq = (pll_state->cfgcr1 & DPLL_CFGCR1_DCO_INTEGER_MASK) + * 24 * 1000; + + dco_freq += (((pll_state->cfgcr1 & DPLL_CFGCR1_DCO_FRACTION_MASK) >> 9) + * 24 * 1000) / 0x8000; + + if (WARN_ON(p0 == 0 || p1 == 0 || p2 == 0)) + return 0; + + return dco_freq / (p0 * p1 * p2 * 5); +} + +int cnl_calc_wrpll_link(struct drm_i915_private *dev_priv, + struct intel_dpll_hw_state *pll_state) +{ + u32 p0, p1, p2, dco_freq, ref_clock; + + p0 = pll_state->cfgcr1 & DPLL_CFGCR1_PDIV_MASK; + p2 = pll_state->cfgcr1 & DPLL_CFGCR1_KDIV_MASK; + + if (pll_state->cfgcr1 & DPLL_CFGCR1_QDIV_MODE(1)) + p1 = (pll_state->cfgcr1 & DPLL_CFGCR1_QDIV_RATIO_MASK) >> + DPLL_CFGCR1_QDIV_RATIO_SHIFT; + else + p1 = 1; + + + switch (p0) { + case DPLL_CFGCR1_PDIV_2: + p0 = 2; + break; + case DPLL_CFGCR1_PDIV_3: + p0 = 3; + break; + case DPLL_CFGCR1_PDIV_5: + p0 = 5; + break; + case DPLL_CFGCR1_PDIV_7: + p0 = 7; + break; + } + + switch (p2) { + case DPLL_CFGCR1_KDIV_1: + p2 = 1; + break; + case DPLL_CFGCR1_KDIV_2: + p2 = 2; + break; + case DPLL_CFGCR1_KDIV_3: + p2 = 3; + break; + } + + ref_clock = cnl_hdmi_pll_ref_clock(dev_priv); + + dco_freq = (pll_state->cfgcr0 & DPLL_CFGCR0_DCO_INTEGER_MASK) + * ref_clock; + + dco_freq += (((pll_state->cfgcr0 & DPLL_CFGCR0_DCO_FRACTION_MASK) >> + DPLL_CFGCR0_DCO_FRACTION_SHIFT) * ref_clock) / 0x8000; + + if (WARN_ON(p0 == 0 || p1 == 0 || p2 == 0)) + return 0; + + return dco_freq / (p0 * p1 * p2 * 5); +} + +static int icl_calc_tbt_pll_link(struct drm_i915_private *dev_priv, + enum port port) +{ + u32 val = I915_READ(DDI_CLK_SEL(port)) & DDI_CLK_SEL_MASK; + + switch (val) { + case DDI_CLK_SEL_NONE: + return 0; + case DDI_CLK_SEL_TBT_162: + return 162000; + case DDI_CLK_SEL_TBT_270: + return 270000; + case DDI_CLK_SEL_TBT_540: + return 540000; + case DDI_CLK_SEL_TBT_810: + return 810000; + default: + MISSING_CASE(val); + return 0; + } +} + +static int icl_calc_mg_pll_link(struct drm_i915_private *dev_priv, + const struct intel_dpll_hw_state *pll_state) +{ + u32 m1, m2_int, m2_frac, div1, div2, ref_clock; + u64 tmp; + + ref_clock = dev_priv->cdclk.hw.ref; + + m1 = pll_state->mg_pll_div1 & MG_PLL_DIV1_FBPREDIV_MASK; + m2_int = pll_state->mg_pll_div0 & MG_PLL_DIV0_FBDIV_INT_MASK; + m2_frac = (pll_state->mg_pll_div0 & MG_PLL_DIV0_FRACNEN_H) ? + (pll_state->mg_pll_div0 & MG_PLL_DIV0_FBDIV_FRAC_MASK) >> + MG_PLL_DIV0_FBDIV_FRAC_SHIFT : 0; + + switch (pll_state->mg_clktop2_hsclkctl & + MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_MASK) { + case MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_2: + div1 = 2; + break; + case MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_3: + div1 = 3; + break; + case MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_5: + div1 = 5; + break; + case MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_7: + div1 = 7; + break; + default: + MISSING_CASE(pll_state->mg_clktop2_hsclkctl); + return 0; + } + + div2 = (pll_state->mg_clktop2_hsclkctl & + MG_CLKTOP2_HSCLKCTL_DSDIV_RATIO_MASK) >> + MG_CLKTOP2_HSCLKCTL_DSDIV_RATIO_SHIFT; + + /* div2 value of 0 is same as 1 means no div */ + if (div2 == 0) + div2 = 1; + + /* + * Adjust the original formula to delay the division by 2^22 in order to + * minimize possible rounding errors. + */ + tmp = (u64)m1 * m2_int * ref_clock + + (((u64)m1 * m2_frac * ref_clock) >> 22); + tmp = div_u64(tmp, 5 * div1 * div2); + + return tmp; +} + +static void ddi_dotclock_get(struct intel_crtc_state *pipe_config) +{ + int dotclock; + + if (pipe_config->has_pch_encoder) + dotclock = intel_dotclock_calculate(pipe_config->port_clock, + &pipe_config->fdi_m_n); + else if (intel_crtc_has_dp_encoder(pipe_config)) + dotclock = intel_dotclock_calculate(pipe_config->port_clock, + &pipe_config->dp_m_n); + else if (pipe_config->has_hdmi_sink && pipe_config->pipe_bpp == 36) + dotclock = pipe_config->port_clock * 2 / 3; + else + dotclock = pipe_config->port_clock; + + if (pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR420 && + !intel_crtc_has_dp_encoder(pipe_config)) + dotclock *= 2; + + if (pipe_config->pixel_multiplier) + dotclock /= pipe_config->pixel_multiplier; + + pipe_config->base.adjusted_mode.crtc_clock = dotclock; +} + +static void icl_ddi_clock_get(struct intel_encoder *encoder, + struct intel_crtc_state *pipe_config) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct intel_dpll_hw_state *pll_state = &pipe_config->dpll_hw_state; + enum port port = encoder->port; + int link_clock; + + if (intel_port_is_combophy(dev_priv, port)) { + link_clock = cnl_calc_wrpll_link(dev_priv, pll_state); + } else { + enum intel_dpll_id pll_id = intel_get_shared_dpll_id(dev_priv, + pipe_config->shared_dpll); + + if (pll_id == DPLL_ID_ICL_TBTPLL) + link_clock = icl_calc_tbt_pll_link(dev_priv, port); + else + link_clock = icl_calc_mg_pll_link(dev_priv, pll_state); + } + + pipe_config->port_clock = link_clock; + + ddi_dotclock_get(pipe_config); +} + +static void cnl_ddi_clock_get(struct intel_encoder *encoder, + struct intel_crtc_state *pipe_config) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct intel_dpll_hw_state *pll_state = &pipe_config->dpll_hw_state; + int link_clock; + + if (pll_state->cfgcr0 & DPLL_CFGCR0_HDMI_MODE) { + link_clock = cnl_calc_wrpll_link(dev_priv, pll_state); + } else { + link_clock = pll_state->cfgcr0 & DPLL_CFGCR0_LINK_RATE_MASK; + + switch (link_clock) { + case DPLL_CFGCR0_LINK_RATE_810: + link_clock = 81000; + break; + case DPLL_CFGCR0_LINK_RATE_1080: + link_clock = 108000; + break; + case DPLL_CFGCR0_LINK_RATE_1350: + link_clock = 135000; + break; + case DPLL_CFGCR0_LINK_RATE_1620: + link_clock = 162000; + break; + case DPLL_CFGCR0_LINK_RATE_2160: + link_clock = 216000; + break; + case DPLL_CFGCR0_LINK_RATE_2700: + link_clock = 270000; + break; + case DPLL_CFGCR0_LINK_RATE_3240: + link_clock = 324000; + break; + case DPLL_CFGCR0_LINK_RATE_4050: + link_clock = 405000; + break; + default: + WARN(1, "Unsupported link rate\n"); + break; + } + link_clock *= 2; + } + + pipe_config->port_clock = link_clock; + + ddi_dotclock_get(pipe_config); +} + +static void skl_ddi_clock_get(struct intel_encoder *encoder, + struct intel_crtc_state *pipe_config) +{ + struct intel_dpll_hw_state *pll_state = &pipe_config->dpll_hw_state; + int link_clock; + + /* + * ctrl1 register is already shifted for each pll, just use 0 to get + * the internal shift for each field + */ + if (pll_state->ctrl1 & DPLL_CTRL1_HDMI_MODE(0)) { + link_clock = skl_calc_wrpll_link(pll_state); + } else { + link_clock = pll_state->ctrl1 & DPLL_CTRL1_LINK_RATE_MASK(0); + link_clock >>= DPLL_CTRL1_LINK_RATE_SHIFT(0); + + switch (link_clock) { + case DPLL_CTRL1_LINK_RATE_810: + link_clock = 81000; + break; + case DPLL_CTRL1_LINK_RATE_1080: + link_clock = 108000; + break; + case DPLL_CTRL1_LINK_RATE_1350: + link_clock = 135000; + break; + case DPLL_CTRL1_LINK_RATE_1620: + link_clock = 162000; + break; + case DPLL_CTRL1_LINK_RATE_2160: + link_clock = 216000; + break; + case DPLL_CTRL1_LINK_RATE_2700: + link_clock = 270000; + break; + default: + WARN(1, "Unsupported link rate\n"); + break; + } + link_clock *= 2; + } + + pipe_config->port_clock = link_clock; + + ddi_dotclock_get(pipe_config); +} + +static void hsw_ddi_clock_get(struct intel_encoder *encoder, + struct intel_crtc_state *pipe_config) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + int link_clock = 0; + u32 val, pll; + + val = hsw_pll_to_ddi_pll_sel(pipe_config->shared_dpll); + switch (val & PORT_CLK_SEL_MASK) { + case PORT_CLK_SEL_LCPLL_810: + link_clock = 81000; + break; + case PORT_CLK_SEL_LCPLL_1350: + link_clock = 135000; + break; + case PORT_CLK_SEL_LCPLL_2700: + link_clock = 270000; + break; + case PORT_CLK_SEL_WRPLL1: + link_clock = hsw_ddi_calc_wrpll_link(dev_priv, WRPLL_CTL(0)); + break; + case PORT_CLK_SEL_WRPLL2: + link_clock = hsw_ddi_calc_wrpll_link(dev_priv, WRPLL_CTL(1)); + break; + case PORT_CLK_SEL_SPLL: + pll = I915_READ(SPLL_CTL) & SPLL_FREQ_MASK; + if (pll == SPLL_FREQ_810MHz) + link_clock = 81000; + else if (pll == SPLL_FREQ_1350MHz) + link_clock = 135000; + else if (pll == SPLL_FREQ_2700MHz) + link_clock = 270000; + else { + WARN(1, "bad spll freq\n"); + return; + } + break; + default: + WARN(1, "bad port clock sel\n"); + return; + } + + pipe_config->port_clock = link_clock * 2; + + ddi_dotclock_get(pipe_config); +} + +static int bxt_calc_pll_link(const struct intel_dpll_hw_state *pll_state) +{ + struct dpll clock; + + clock.m1 = 2; + clock.m2 = (pll_state->pll0 & PORT_PLL_M2_MASK) << 22; + if (pll_state->pll3 & PORT_PLL_M2_FRAC_ENABLE) + clock.m2 |= pll_state->pll2 & PORT_PLL_M2_FRAC_MASK; + clock.n = (pll_state->pll1 & PORT_PLL_N_MASK) >> PORT_PLL_N_SHIFT; + clock.p1 = (pll_state->ebb0 & PORT_PLL_P1_MASK) >> PORT_PLL_P1_SHIFT; + clock.p2 = (pll_state->ebb0 & PORT_PLL_P2_MASK) >> PORT_PLL_P2_SHIFT; + + return chv_calc_dpll_params(100000, &clock); +} + +static void bxt_ddi_clock_get(struct intel_encoder *encoder, + struct intel_crtc_state *pipe_config) +{ + pipe_config->port_clock = + bxt_calc_pll_link(&pipe_config->dpll_hw_state); + + ddi_dotclock_get(pipe_config); +} + +static void intel_ddi_clock_get(struct intel_encoder *encoder, + struct intel_crtc_state *pipe_config) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + + if (INTEL_GEN(dev_priv) >= 11) + icl_ddi_clock_get(encoder, pipe_config); + else if (IS_CANNONLAKE(dev_priv)) + cnl_ddi_clock_get(encoder, pipe_config); + else if (IS_GEN9_LP(dev_priv)) + bxt_ddi_clock_get(encoder, pipe_config); + else if (IS_GEN9_BC(dev_priv)) + skl_ddi_clock_get(encoder, pipe_config); + else if (INTEL_GEN(dev_priv) <= 8) + hsw_ddi_clock_get(encoder, pipe_config); +} + +void intel_ddi_set_pipe_settings(const struct intel_crtc_state *crtc_state) +{ + struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc); + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); + enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; + u32 temp; + + if (!intel_crtc_has_dp_encoder(crtc_state)) + return; + + WARN_ON(transcoder_is_dsi(cpu_transcoder)); + + temp = TRANS_MSA_SYNC_CLK; + + if (crtc_state->limited_color_range) + temp |= TRANS_MSA_CEA_RANGE; + + switch (crtc_state->pipe_bpp) { + case 18: + temp |= TRANS_MSA_6_BPC; + break; + case 24: + temp |= TRANS_MSA_8_BPC; + break; + case 30: + temp |= TRANS_MSA_10_BPC; + break; + case 36: + temp |= TRANS_MSA_12_BPC; + break; + default: + MISSING_CASE(crtc_state->pipe_bpp); + break; + } + + /* + * As per DP 1.2 spec section 2.3.4.3 while sending + * YCBCR 444 signals we should program MSA MISC1/0 fields with + * colorspace information. The output colorspace encoding is BT601. + */ + if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR444) + temp |= TRANS_MSA_SAMPLING_444 | TRANS_MSA_CLRSP_YCBCR; + /* + * As per DP 1.4a spec section 2.2.4.3 [MSA Field for Indication + * of Color Encoding Format and Content Color Gamut] while sending + * YCBCR 420 signals we should program MSA MISC1 fields which + * indicate VSC SDP for the Pixel Encoding/Colorimetry Format. + */ + if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) + temp |= TRANS_MSA_USE_VSC_SDP; + I915_WRITE(TRANS_MSA_MISC(cpu_transcoder), temp); +} + +void intel_ddi_set_vc_payload_alloc(const struct intel_crtc_state *crtc_state, + bool state) +{ + struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc); + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); + enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; + u32 temp; + + temp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder)); + if (state == true) + temp |= TRANS_DDI_DP_VC_PAYLOAD_ALLOC; + else + temp &= ~TRANS_DDI_DP_VC_PAYLOAD_ALLOC; + I915_WRITE(TRANS_DDI_FUNC_CTL(cpu_transcoder), temp); +} + +void intel_ddi_enable_transcoder_func(const struct intel_crtc_state *crtc_state) +{ + struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc); + struct intel_encoder *encoder = intel_ddi_get_crtc_encoder(crtc); + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); + enum pipe pipe = crtc->pipe; + enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; + enum port port = encoder->port; + u32 temp; + + /* Enable TRANS_DDI_FUNC_CTL for the pipe to work in HDMI mode */ + temp = TRANS_DDI_FUNC_ENABLE; + temp |= TRANS_DDI_SELECT_PORT(port); + + switch (crtc_state->pipe_bpp) { + case 18: + temp |= TRANS_DDI_BPC_6; + break; + case 24: + temp |= TRANS_DDI_BPC_8; + break; + case 30: + temp |= TRANS_DDI_BPC_10; + break; + case 36: + temp |= TRANS_DDI_BPC_12; + break; + default: + BUG(); + } + + if (crtc_state->base.adjusted_mode.flags & DRM_MODE_FLAG_PVSYNC) + temp |= TRANS_DDI_PVSYNC; + if (crtc_state->base.adjusted_mode.flags & DRM_MODE_FLAG_PHSYNC) + temp |= TRANS_DDI_PHSYNC; + + if (cpu_transcoder == TRANSCODER_EDP) { + switch (pipe) { + case PIPE_A: + /* On Haswell, can only use the always-on power well for + * eDP when not using the panel fitter, and when not + * using motion blur mitigation (which we don't + * support). */ + if (crtc_state->pch_pfit.force_thru) + temp |= TRANS_DDI_EDP_INPUT_A_ONOFF; + else + temp |= TRANS_DDI_EDP_INPUT_A_ON; + break; + case PIPE_B: + temp |= TRANS_DDI_EDP_INPUT_B_ONOFF; + break; + case PIPE_C: + temp |= TRANS_DDI_EDP_INPUT_C_ONOFF; + break; + default: + BUG(); + break; + } + } + + if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) { + if (crtc_state->has_hdmi_sink) + temp |= TRANS_DDI_MODE_SELECT_HDMI; + else + temp |= TRANS_DDI_MODE_SELECT_DVI; + + if (crtc_state->hdmi_scrambling) + temp |= TRANS_DDI_HDMI_SCRAMBLING; + if (crtc_state->hdmi_high_tmds_clock_ratio) + temp |= TRANS_DDI_HIGH_TMDS_CHAR_RATE; + } else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_ANALOG)) { + temp |= TRANS_DDI_MODE_SELECT_FDI; + temp |= (crtc_state->fdi_lanes - 1) << 1; + } else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST)) { + temp |= TRANS_DDI_MODE_SELECT_DP_MST; + temp |= DDI_PORT_WIDTH(crtc_state->lane_count); + } else { + temp |= TRANS_DDI_MODE_SELECT_DP_SST; + temp |= DDI_PORT_WIDTH(crtc_state->lane_count); + } + + I915_WRITE(TRANS_DDI_FUNC_CTL(cpu_transcoder), temp); +} + +void intel_ddi_disable_transcoder_func(const struct intel_crtc_state *crtc_state) +{ + struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc); + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); + enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; + i915_reg_t reg = TRANS_DDI_FUNC_CTL(cpu_transcoder); + u32 val = I915_READ(reg); + + val &= ~(TRANS_DDI_FUNC_ENABLE | TRANS_DDI_PORT_MASK | TRANS_DDI_DP_VC_PAYLOAD_ALLOC); + val |= TRANS_DDI_PORT_NONE; + I915_WRITE(reg, val); + + if (dev_priv->quirks & QUIRK_INCREASE_DDI_DISABLED_TIME && + intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) { + DRM_DEBUG_KMS("Quirk Increase DDI disabled time\n"); + /* Quirk time at 100ms for reliable operation */ + msleep(100); + } +} + +int intel_ddi_toggle_hdcp_signalling(struct intel_encoder *intel_encoder, + bool enable) +{ + struct drm_device *dev = intel_encoder->base.dev; + struct drm_i915_private *dev_priv = to_i915(dev); + intel_wakeref_t wakeref; + enum pipe pipe = 0; + int ret = 0; + u32 tmp; + + wakeref = intel_display_power_get_if_enabled(dev_priv, + intel_encoder->power_domain); + if (WARN_ON(!wakeref)) + return -ENXIO; + + if (WARN_ON(!intel_encoder->get_hw_state(intel_encoder, &pipe))) { + ret = -EIO; + goto out; + } + + tmp = I915_READ(TRANS_DDI_FUNC_CTL(pipe)); + if (enable) + tmp |= TRANS_DDI_HDCP_SIGNALLING; + else + tmp &= ~TRANS_DDI_HDCP_SIGNALLING; + I915_WRITE(TRANS_DDI_FUNC_CTL(pipe), tmp); +out: + intel_display_power_put(dev_priv, intel_encoder->power_domain, wakeref); + return ret; +} + +bool intel_ddi_connector_get_hw_state(struct intel_connector *intel_connector) +{ + struct drm_device *dev = intel_connector->base.dev; + struct drm_i915_private *dev_priv = to_i915(dev); + struct intel_encoder *encoder = intel_connector->encoder; + int type = intel_connector->base.connector_type; + enum port port = encoder->port; + enum transcoder cpu_transcoder; + intel_wakeref_t wakeref; + enum pipe pipe = 0; + u32 tmp; + bool ret; + + wakeref = intel_display_power_get_if_enabled(dev_priv, + encoder->power_domain); + if (!wakeref) + return false; + + if (!encoder->get_hw_state(encoder, &pipe)) { + ret = false; + goto out; + } + + if (HAS_TRANSCODER_EDP(dev_priv) && port == PORT_A) + cpu_transcoder = TRANSCODER_EDP; + else + cpu_transcoder = (enum transcoder) pipe; + + tmp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder)); + + switch (tmp & TRANS_DDI_MODE_SELECT_MASK) { + case TRANS_DDI_MODE_SELECT_HDMI: + case TRANS_DDI_MODE_SELECT_DVI: + ret = type == DRM_MODE_CONNECTOR_HDMIA; + break; + + case TRANS_DDI_MODE_SELECT_DP_SST: + ret = type == DRM_MODE_CONNECTOR_eDP || + type == DRM_MODE_CONNECTOR_DisplayPort; + break; + + case TRANS_DDI_MODE_SELECT_DP_MST: + /* if the transcoder is in MST state then + * connector isn't connected */ + ret = false; + break; + + case TRANS_DDI_MODE_SELECT_FDI: + ret = type == DRM_MODE_CONNECTOR_VGA; + break; + + default: + ret = false; + break; + } + +out: + intel_display_power_put(dev_priv, encoder->power_domain, wakeref); + + return ret; +} + +static void intel_ddi_get_encoder_pipes(struct intel_encoder *encoder, + u8 *pipe_mask, bool *is_dp_mst) +{ + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = to_i915(dev); + enum port port = encoder->port; + intel_wakeref_t wakeref; + enum pipe p; + u32 tmp; + u8 mst_pipe_mask; + + *pipe_mask = 0; + *is_dp_mst = false; + + wakeref = intel_display_power_get_if_enabled(dev_priv, + encoder->power_domain); + if (!wakeref) + return; + + tmp = I915_READ(DDI_BUF_CTL(port)); + if (!(tmp & DDI_BUF_CTL_ENABLE)) + goto out; + + if (HAS_TRANSCODER_EDP(dev_priv) && port == PORT_A) { + tmp = I915_READ(TRANS_DDI_FUNC_CTL(TRANSCODER_EDP)); + + switch (tmp & TRANS_DDI_EDP_INPUT_MASK) { + default: + MISSING_CASE(tmp & TRANS_DDI_EDP_INPUT_MASK); + /* fallthrough */ + case TRANS_DDI_EDP_INPUT_A_ON: + case TRANS_DDI_EDP_INPUT_A_ONOFF: + *pipe_mask = BIT(PIPE_A); + break; + case TRANS_DDI_EDP_INPUT_B_ONOFF: + *pipe_mask = BIT(PIPE_B); + break; + case TRANS_DDI_EDP_INPUT_C_ONOFF: + *pipe_mask = BIT(PIPE_C); + break; + } + + goto out; + } + + mst_pipe_mask = 0; + for_each_pipe(dev_priv, p) { + enum transcoder cpu_transcoder = (enum transcoder)p; + + tmp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder)); + + if ((tmp & TRANS_DDI_PORT_MASK) != TRANS_DDI_SELECT_PORT(port)) + continue; + + if ((tmp & TRANS_DDI_MODE_SELECT_MASK) == + TRANS_DDI_MODE_SELECT_DP_MST) + mst_pipe_mask |= BIT(p); + + *pipe_mask |= BIT(p); + } + + if (!*pipe_mask) + DRM_DEBUG_KMS("No pipe for ddi port %c found\n", + port_name(port)); + + if (!mst_pipe_mask && hweight8(*pipe_mask) > 1) { + DRM_DEBUG_KMS("Multiple pipes for non DP-MST port %c (pipe_mask %02x)\n", + port_name(port), *pipe_mask); + *pipe_mask = BIT(ffs(*pipe_mask) - 1); + } + + if (mst_pipe_mask && mst_pipe_mask != *pipe_mask) + DRM_DEBUG_KMS("Conflicting MST and non-MST encoders for port %c (pipe_mask %02x mst_pipe_mask %02x)\n", + port_name(port), *pipe_mask, mst_pipe_mask); + else + *is_dp_mst = mst_pipe_mask; + +out: + if (*pipe_mask && IS_GEN9_LP(dev_priv)) { + tmp = I915_READ(BXT_PHY_CTL(port)); + if ((tmp & (BXT_PHY_CMNLANE_POWERDOWN_ACK | + BXT_PHY_LANE_POWERDOWN_ACK | + BXT_PHY_LANE_ENABLED)) != BXT_PHY_LANE_ENABLED) + DRM_ERROR("Port %c enabled but PHY powered down? " + "(PHY_CTL %08x)\n", port_name(port), tmp); + } + + intel_display_power_put(dev_priv, encoder->power_domain, wakeref); +} + +bool intel_ddi_get_hw_state(struct intel_encoder *encoder, + enum pipe *pipe) +{ + u8 pipe_mask; + bool is_mst; + + intel_ddi_get_encoder_pipes(encoder, &pipe_mask, &is_mst); + + if (is_mst || !pipe_mask) + return false; + + *pipe = ffs(pipe_mask) - 1; + + return true; +} + +static inline enum intel_display_power_domain +intel_ddi_main_link_aux_domain(struct intel_digital_port *dig_port) +{ + /* CNL+ HW requires corresponding AUX IOs to be powered up for PSR with + * DC states enabled at the same time, while for driver initiated AUX + * transfers we need the same AUX IOs to be powered but with DC states + * disabled. Accordingly use the AUX power domain here which leaves DC + * states enabled. + * However, for non-A AUX ports the corresponding non-EDP transcoders + * would have already enabled power well 2 and DC_OFF. This means we can + * acquire a wider POWER_DOMAIN_AUX_{B,C,D,F} reference instead of a + * specific AUX_IO reference without powering up any extra wells. + * Note that PSR is enabled only on Port A even though this function + * returns the correct domain for other ports too. + */ + return dig_port->aux_ch == AUX_CH_A ? POWER_DOMAIN_AUX_IO_A : + intel_aux_power_domain(dig_port); +} + +static void intel_ddi_get_power_domains(struct intel_encoder *encoder, + struct intel_crtc_state *crtc_state) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct intel_digital_port *dig_port; + + /* + * TODO: Add support for MST encoders. Atm, the following should never + * happen since fake-MST encoders don't set their get_power_domains() + * hook. + */ + if (WARN_ON(intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST))) + return; + + dig_port = enc_to_dig_port(&encoder->base); + intel_display_power_get(dev_priv, dig_port->ddi_io_power_domain); + + /* + * AUX power is only needed for (e)DP mode, and for HDMI mode on TC + * ports. + */ + if (intel_crtc_has_dp_encoder(crtc_state) || + intel_port_is_tc(dev_priv, encoder->port)) + intel_display_power_get(dev_priv, + intel_ddi_main_link_aux_domain(dig_port)); + + /* + * VDSC power is needed when DSC is enabled + */ + if (crtc_state->dsc_params.compression_enable) + intel_display_power_get(dev_priv, + intel_dsc_power_domain(crtc_state)); +} + +void intel_ddi_enable_pipe_clock(const struct intel_crtc_state *crtc_state) +{ + struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc); + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); + struct intel_encoder *encoder = intel_ddi_get_crtc_encoder(crtc); + enum port port = encoder->port; + enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; + + if (cpu_transcoder != TRANSCODER_EDP) + I915_WRITE(TRANS_CLK_SEL(cpu_transcoder), + TRANS_CLK_SEL_PORT(port)); +} + +void intel_ddi_disable_pipe_clock(const struct intel_crtc_state *crtc_state) +{ + struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev); + enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; + + if (cpu_transcoder != TRANSCODER_EDP) + I915_WRITE(TRANS_CLK_SEL(cpu_transcoder), + TRANS_CLK_SEL_DISABLED); +} + +static void _skl_ddi_set_iboost(struct drm_i915_private *dev_priv, + enum port port, u8 iboost) +{ + u32 tmp; + + tmp = I915_READ(DISPIO_CR_TX_BMU_CR0); + tmp &= ~(BALANCE_LEG_MASK(port) | BALANCE_LEG_DISABLE(port)); + if (iboost) + tmp |= iboost << BALANCE_LEG_SHIFT(port); + else + tmp |= BALANCE_LEG_DISABLE(port); + I915_WRITE(DISPIO_CR_TX_BMU_CR0, tmp); +} + +static void skl_ddi_set_iboost(struct intel_encoder *encoder, + int level, enum intel_output_type type) +{ + struct intel_digital_port *intel_dig_port = enc_to_dig_port(&encoder->base); + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + enum port port = encoder->port; + u8 iboost; + + if (type == INTEL_OUTPUT_HDMI) + iboost = dev_priv->vbt.ddi_port_info[port].hdmi_boost_level; + else + iboost = dev_priv->vbt.ddi_port_info[port].dp_boost_level; + + if (iboost == 0) { + const struct ddi_buf_trans *ddi_translations; + int n_entries; + + if (type == INTEL_OUTPUT_HDMI) + ddi_translations = intel_ddi_get_buf_trans_hdmi(dev_priv, &n_entries); + else if (type == INTEL_OUTPUT_EDP) + ddi_translations = intel_ddi_get_buf_trans_edp(dev_priv, port, &n_entries); + else + ddi_translations = intel_ddi_get_buf_trans_dp(dev_priv, port, &n_entries); + + if (WARN_ON_ONCE(!ddi_translations)) + return; + if (WARN_ON_ONCE(level >= n_entries)) + level = n_entries - 1; + + iboost = ddi_translations[level].i_boost; + } + + /* Make sure that the requested I_boost is valid */ + if (iboost && iboost != 0x1 && iboost != 0x3 && iboost != 0x7) { + DRM_ERROR("Invalid I_boost value %u\n", iboost); + return; + } + + _skl_ddi_set_iboost(dev_priv, port, iboost); + + if (port == PORT_A && intel_dig_port->max_lanes == 4) + _skl_ddi_set_iboost(dev_priv, PORT_E, iboost); +} + +static void bxt_ddi_vswing_sequence(struct intel_encoder *encoder, + int level, enum intel_output_type type) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + const struct bxt_ddi_buf_trans *ddi_translations; + enum port port = encoder->port; + int n_entries; + + if (type == INTEL_OUTPUT_HDMI) + ddi_translations = bxt_get_buf_trans_hdmi(dev_priv, &n_entries); + else if (type == INTEL_OUTPUT_EDP) + ddi_translations = bxt_get_buf_trans_edp(dev_priv, &n_entries); + else + ddi_translations = bxt_get_buf_trans_dp(dev_priv, &n_entries); + + if (WARN_ON_ONCE(!ddi_translations)) + return; + if (WARN_ON_ONCE(level >= n_entries)) + level = n_entries - 1; + + bxt_ddi_phy_set_signal_level(dev_priv, port, + ddi_translations[level].margin, + ddi_translations[level].scale, + ddi_translations[level].enable, + ddi_translations[level].deemphasis); +} + +u8 intel_ddi_dp_voltage_max(struct intel_encoder *encoder) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); + enum port port = encoder->port; + int n_entries; + + if (INTEL_GEN(dev_priv) >= 11) { + if (intel_port_is_combophy(dev_priv, port)) + icl_get_combo_buf_trans(dev_priv, port, encoder->type, + intel_dp->link_rate, &n_entries); + else + n_entries = ARRAY_SIZE(icl_mg_phy_ddi_translations); + } else if (IS_CANNONLAKE(dev_priv)) { + if (encoder->type == INTEL_OUTPUT_EDP) + cnl_get_buf_trans_edp(dev_priv, &n_entries); + else + cnl_get_buf_trans_dp(dev_priv, &n_entries); + } else if (IS_GEN9_LP(dev_priv)) { + if (encoder->type == INTEL_OUTPUT_EDP) + bxt_get_buf_trans_edp(dev_priv, &n_entries); + else + bxt_get_buf_trans_dp(dev_priv, &n_entries); + } else { + if (encoder->type == INTEL_OUTPUT_EDP) + intel_ddi_get_buf_trans_edp(dev_priv, port, &n_entries); + else + intel_ddi_get_buf_trans_dp(dev_priv, port, &n_entries); + } + + if (WARN_ON(n_entries < 1)) + n_entries = 1; + if (WARN_ON(n_entries > ARRAY_SIZE(index_to_dp_signal_levels))) + n_entries = ARRAY_SIZE(index_to_dp_signal_levels); + + return index_to_dp_signal_levels[n_entries - 1] & + DP_TRAIN_VOLTAGE_SWING_MASK; +} + +/* + * We assume that the full set of pre-emphasis values can be + * used on all DDI platforms. Should that change we need to + * rethink this code. + */ +u8 intel_ddi_dp_pre_emphasis_max(struct intel_encoder *encoder, u8 voltage_swing) +{ + switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_LEVEL_0: + return DP_TRAIN_PRE_EMPH_LEVEL_3; + case DP_TRAIN_VOLTAGE_SWING_LEVEL_1: + return DP_TRAIN_PRE_EMPH_LEVEL_2; + case DP_TRAIN_VOLTAGE_SWING_LEVEL_2: + return DP_TRAIN_PRE_EMPH_LEVEL_1; + case DP_TRAIN_VOLTAGE_SWING_LEVEL_3: + default: + return DP_TRAIN_PRE_EMPH_LEVEL_0; + } +} + +static void cnl_ddi_vswing_program(struct intel_encoder *encoder, + int level, enum intel_output_type type) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + const struct cnl_ddi_buf_trans *ddi_translations; + enum port port = encoder->port; + int n_entries, ln; + u32 val; + + if (type == INTEL_OUTPUT_HDMI) + ddi_translations = cnl_get_buf_trans_hdmi(dev_priv, &n_entries); + else if (type == INTEL_OUTPUT_EDP) + ddi_translations = cnl_get_buf_trans_edp(dev_priv, &n_entries); + else + ddi_translations = cnl_get_buf_trans_dp(dev_priv, &n_entries); + + if (WARN_ON_ONCE(!ddi_translations)) + return; + if (WARN_ON_ONCE(level >= n_entries)) + level = n_entries - 1; + + /* Set PORT_TX_DW5 Scaling Mode Sel to 010b. */ + val = I915_READ(CNL_PORT_TX_DW5_LN0(port)); + val &= ~SCALING_MODE_SEL_MASK; + val |= SCALING_MODE_SEL(2); + I915_WRITE(CNL_PORT_TX_DW5_GRP(port), val); + + /* Program PORT_TX_DW2 */ + val = I915_READ(CNL_PORT_TX_DW2_LN0(port)); + val &= ~(SWING_SEL_LOWER_MASK | SWING_SEL_UPPER_MASK | + RCOMP_SCALAR_MASK); + val |= SWING_SEL_UPPER(ddi_translations[level].dw2_swing_sel); + val |= SWING_SEL_LOWER(ddi_translations[level].dw2_swing_sel); + /* Rcomp scalar is fixed as 0x98 for every table entry */ + val |= RCOMP_SCALAR(0x98); + I915_WRITE(CNL_PORT_TX_DW2_GRP(port), val); + + /* Program PORT_TX_DW4 */ + /* We cannot write to GRP. It would overrite individual loadgen */ + for (ln = 0; ln < 4; ln++) { + val = I915_READ(CNL_PORT_TX_DW4_LN(ln, port)); + val &= ~(POST_CURSOR_1_MASK | POST_CURSOR_2_MASK | + CURSOR_COEFF_MASK); + val |= POST_CURSOR_1(ddi_translations[level].dw4_post_cursor_1); + val |= POST_CURSOR_2(ddi_translations[level].dw4_post_cursor_2); + val |= CURSOR_COEFF(ddi_translations[level].dw4_cursor_coeff); + I915_WRITE(CNL_PORT_TX_DW4_LN(ln, port), val); + } + + /* Program PORT_TX_DW5 */ + /* All DW5 values are fixed for every table entry */ + val = I915_READ(CNL_PORT_TX_DW5_LN0(port)); + val &= ~RTERM_SELECT_MASK; + val |= RTERM_SELECT(6); + val |= TAP3_DISABLE; + I915_WRITE(CNL_PORT_TX_DW5_GRP(port), val); + + /* Program PORT_TX_DW7 */ + val = I915_READ(CNL_PORT_TX_DW7_LN0(port)); + val &= ~N_SCALAR_MASK; + val |= N_SCALAR(ddi_translations[level].dw7_n_scalar); + I915_WRITE(CNL_PORT_TX_DW7_GRP(port), val); +} + +static void cnl_ddi_vswing_sequence(struct intel_encoder *encoder, + int level, enum intel_output_type type) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + enum port port = encoder->port; + int width, rate, ln; + u32 val; + + if (type == INTEL_OUTPUT_HDMI) { + width = 4; + rate = 0; /* Rate is always < than 6GHz for HDMI */ + } else { + struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); + + width = intel_dp->lane_count; + rate = intel_dp->link_rate; + } + + /* + * 1. If port type is eDP or DP, + * set PORT_PCS_DW1 cmnkeeper_enable to 1b, + * else clear to 0b. + */ + val = I915_READ(CNL_PORT_PCS_DW1_LN0(port)); + if (type != INTEL_OUTPUT_HDMI) + val |= COMMON_KEEPER_EN; + else + val &= ~COMMON_KEEPER_EN; + I915_WRITE(CNL_PORT_PCS_DW1_GRP(port), val); + + /* 2. Program loadgen select */ + /* + * Program PORT_TX_DW4_LN depending on Bit rate and used lanes + * <= 6 GHz and 4 lanes (LN0=0, LN1=1, LN2=1, LN3=1) + * <= 6 GHz and 1,2 lanes (LN0=0, LN1=1, LN2=1, LN3=0) + * > 6 GHz (LN0=0, LN1=0, LN2=0, LN3=0) + */ + for (ln = 0; ln <= 3; ln++) { + val = I915_READ(CNL_PORT_TX_DW4_LN(ln, port)); + val &= ~LOADGEN_SELECT; + + if ((rate <= 600000 && width == 4 && ln >= 1) || + (rate <= 600000 && width < 4 && (ln == 1 || ln == 2))) { + val |= LOADGEN_SELECT; + } + I915_WRITE(CNL_PORT_TX_DW4_LN(ln, port), val); + } + + /* 3. Set PORT_CL_DW5 SUS Clock Config to 11b */ + val = I915_READ(CNL_PORT_CL1CM_DW5); + val |= SUS_CLOCK_CONFIG; + I915_WRITE(CNL_PORT_CL1CM_DW5, val); + + /* 4. Clear training enable to change swing values */ + val = I915_READ(CNL_PORT_TX_DW5_LN0(port)); + val &= ~TX_TRAINING_EN; + I915_WRITE(CNL_PORT_TX_DW5_GRP(port), val); + + /* 5. Program swing and de-emphasis */ + cnl_ddi_vswing_program(encoder, level, type); + + /* 6. Set training enable to trigger update */ + val = I915_READ(CNL_PORT_TX_DW5_LN0(port)); + val |= TX_TRAINING_EN; + I915_WRITE(CNL_PORT_TX_DW5_GRP(port), val); +} + +static void icl_ddi_combo_vswing_program(struct drm_i915_private *dev_priv, + u32 level, enum port port, int type, + int rate) +{ + const struct cnl_ddi_buf_trans *ddi_translations = NULL; + u32 n_entries, val; + int ln; + + ddi_translations = icl_get_combo_buf_trans(dev_priv, port, type, + rate, &n_entries); + if (!ddi_translations) + return; + + if (level >= n_entries) { + DRM_DEBUG_KMS("DDI translation not found for level %d. Using %d instead.", level, n_entries - 1); + level = n_entries - 1; + } + + /* Set PORT_TX_DW5 */ + val = I915_READ(ICL_PORT_TX_DW5_LN0(port)); + val &= ~(SCALING_MODE_SEL_MASK | RTERM_SELECT_MASK | + TAP2_DISABLE | TAP3_DISABLE); + val |= SCALING_MODE_SEL(0x2); + val |= RTERM_SELECT(0x6); + val |= TAP3_DISABLE; + I915_WRITE(ICL_PORT_TX_DW5_GRP(port), val); + + /* Program PORT_TX_DW2 */ + val = I915_READ(ICL_PORT_TX_DW2_LN0(port)); + val &= ~(SWING_SEL_LOWER_MASK | SWING_SEL_UPPER_MASK | + RCOMP_SCALAR_MASK); + val |= SWING_SEL_UPPER(ddi_translations[level].dw2_swing_sel); + val |= SWING_SEL_LOWER(ddi_translations[level].dw2_swing_sel); + /* Program Rcomp scalar for every table entry */ + val |= RCOMP_SCALAR(0x98); + I915_WRITE(ICL_PORT_TX_DW2_GRP(port), val); + + /* Program PORT_TX_DW4 */ + /* We cannot write to GRP. It would overwrite individual loadgen. */ + for (ln = 0; ln <= 3; ln++) { + val = I915_READ(ICL_PORT_TX_DW4_LN(ln, port)); + val &= ~(POST_CURSOR_1_MASK | POST_CURSOR_2_MASK | + CURSOR_COEFF_MASK); + val |= POST_CURSOR_1(ddi_translations[level].dw4_post_cursor_1); + val |= POST_CURSOR_2(ddi_translations[level].dw4_post_cursor_2); + val |= CURSOR_COEFF(ddi_translations[level].dw4_cursor_coeff); + I915_WRITE(ICL_PORT_TX_DW4_LN(ln, port), val); + } + + /* Program PORT_TX_DW7 */ + val = I915_READ(ICL_PORT_TX_DW7_LN0(port)); + val &= ~N_SCALAR_MASK; + val |= N_SCALAR(ddi_translations[level].dw7_n_scalar); + I915_WRITE(ICL_PORT_TX_DW7_GRP(port), val); +} + +static void icl_combo_phy_ddi_vswing_sequence(struct intel_encoder *encoder, + u32 level, + enum intel_output_type type) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + enum port port = encoder->port; + int width = 0; + int rate = 0; + u32 val; + int ln = 0; + + if (type == INTEL_OUTPUT_HDMI) { + width = 4; + /* Rate is always < than 6GHz for HDMI */ + } else { + struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); + + width = intel_dp->lane_count; + rate = intel_dp->link_rate; + } + + /* + * 1. If port type is eDP or DP, + * set PORT_PCS_DW1 cmnkeeper_enable to 1b, + * else clear to 0b. + */ + val = I915_READ(ICL_PORT_PCS_DW1_LN0(port)); + if (type == INTEL_OUTPUT_HDMI) + val &= ~COMMON_KEEPER_EN; + else + val |= COMMON_KEEPER_EN; + I915_WRITE(ICL_PORT_PCS_DW1_GRP(port), val); + + /* 2. Program loadgen select */ + /* + * Program PORT_TX_DW4_LN depending on Bit rate and used lanes + * <= 6 GHz and 4 lanes (LN0=0, LN1=1, LN2=1, LN3=1) + * <= 6 GHz and 1,2 lanes (LN0=0, LN1=1, LN2=1, LN3=0) + * > 6 GHz (LN0=0, LN1=0, LN2=0, LN3=0) + */ + for (ln = 0; ln <= 3; ln++) { + val = I915_READ(ICL_PORT_TX_DW4_LN(ln, port)); + val &= ~LOADGEN_SELECT; + + if ((rate <= 600000 && width == 4 && ln >= 1) || + (rate <= 600000 && width < 4 && (ln == 1 || ln == 2))) { + val |= LOADGEN_SELECT; + } + I915_WRITE(ICL_PORT_TX_DW4_LN(ln, port), val); + } + + /* 3. Set PORT_CL_DW5 SUS Clock Config to 11b */ + val = I915_READ(ICL_PORT_CL_DW5(port)); + val |= SUS_CLOCK_CONFIG; + I915_WRITE(ICL_PORT_CL_DW5(port), val); + + /* 4. Clear training enable to change swing values */ + val = I915_READ(ICL_PORT_TX_DW5_LN0(port)); + val &= ~TX_TRAINING_EN; + I915_WRITE(ICL_PORT_TX_DW5_GRP(port), val); + + /* 5. Program swing and de-emphasis */ + icl_ddi_combo_vswing_program(dev_priv, level, port, type, rate); + + /* 6. Set training enable to trigger update */ + val = I915_READ(ICL_PORT_TX_DW5_LN0(port)); + val |= TX_TRAINING_EN; + I915_WRITE(ICL_PORT_TX_DW5_GRP(port), val); +} + +static void icl_mg_phy_ddi_vswing_sequence(struct intel_encoder *encoder, + int link_clock, + u32 level) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + enum port port = encoder->port; + const struct icl_mg_phy_ddi_buf_trans *ddi_translations; + u32 n_entries, val; + int ln; + + n_entries = ARRAY_SIZE(icl_mg_phy_ddi_translations); + ddi_translations = icl_mg_phy_ddi_translations; + /* The table does not have values for level 3 and level 9. */ + if (level >= n_entries || level == 3 || level == 9) { + DRM_DEBUG_KMS("DDI translation not found for level %d. Using %d instead.", + level, n_entries - 2); + level = n_entries - 2; + } + + /* Set MG_TX_LINK_PARAMS cri_use_fs32 to 0. */ + for (ln = 0; ln < 2; ln++) { + val = I915_READ(MG_TX1_LINK_PARAMS(ln, port)); + val &= ~CRI_USE_FS32; + I915_WRITE(MG_TX1_LINK_PARAMS(ln, port), val); + + val = I915_READ(MG_TX2_LINK_PARAMS(ln, port)); + val &= ~CRI_USE_FS32; + I915_WRITE(MG_TX2_LINK_PARAMS(ln, port), val); + } + + /* Program MG_TX_SWINGCTRL with values from vswing table */ + for (ln = 0; ln < 2; ln++) { + val = I915_READ(MG_TX1_SWINGCTRL(ln, port)); + val &= ~CRI_TXDEEMPH_OVERRIDE_17_12_MASK; + val |= CRI_TXDEEMPH_OVERRIDE_17_12( + ddi_translations[level].cri_txdeemph_override_17_12); + I915_WRITE(MG_TX1_SWINGCTRL(ln, port), val); + + val = I915_READ(MG_TX2_SWINGCTRL(ln, port)); + val &= ~CRI_TXDEEMPH_OVERRIDE_17_12_MASK; + val |= CRI_TXDEEMPH_OVERRIDE_17_12( + ddi_translations[level].cri_txdeemph_override_17_12); + I915_WRITE(MG_TX2_SWINGCTRL(ln, port), val); + } + + /* Program MG_TX_DRVCTRL with values from vswing table */ + for (ln = 0; ln < 2; ln++) { + val = I915_READ(MG_TX1_DRVCTRL(ln, port)); + val &= ~(CRI_TXDEEMPH_OVERRIDE_11_6_MASK | + CRI_TXDEEMPH_OVERRIDE_5_0_MASK); + val |= CRI_TXDEEMPH_OVERRIDE_5_0( + ddi_translations[level].cri_txdeemph_override_5_0) | + CRI_TXDEEMPH_OVERRIDE_11_6( + ddi_translations[level].cri_txdeemph_override_11_6) | + CRI_TXDEEMPH_OVERRIDE_EN; + I915_WRITE(MG_TX1_DRVCTRL(ln, port), val); + + val = I915_READ(MG_TX2_DRVCTRL(ln, port)); + val &= ~(CRI_TXDEEMPH_OVERRIDE_11_6_MASK | + CRI_TXDEEMPH_OVERRIDE_5_0_MASK); + val |= CRI_TXDEEMPH_OVERRIDE_5_0( + ddi_translations[level].cri_txdeemph_override_5_0) | + CRI_TXDEEMPH_OVERRIDE_11_6( + ddi_translations[level].cri_txdeemph_override_11_6) | + CRI_TXDEEMPH_OVERRIDE_EN; + I915_WRITE(MG_TX2_DRVCTRL(ln, port), val); + + /* FIXME: Program CRI_LOADGEN_SEL after the spec is updated */ + } + + /* + * Program MG_CLKHUB<LN, port being used> with value from frequency table + * In case of Legacy mode on MG PHY, both TX1 and TX2 enabled so use the + * values from table for which TX1 and TX2 enabled. + */ + for (ln = 0; ln < 2; ln++) { + val = I915_READ(MG_CLKHUB(ln, port)); + if (link_clock < 300000) + val |= CFG_LOW_RATE_LKREN_EN; + else + val &= ~CFG_LOW_RATE_LKREN_EN; + I915_WRITE(MG_CLKHUB(ln, port), val); + } + + /* Program the MG_TX_DCC<LN, port being used> based on the link frequency */ + for (ln = 0; ln < 2; ln++) { + val = I915_READ(MG_TX1_DCC(ln, port)); + val &= ~CFG_AMI_CK_DIV_OVERRIDE_VAL_MASK; + if (link_clock <= 500000) { + val &= ~CFG_AMI_CK_DIV_OVERRIDE_EN; + } else { + val |= CFG_AMI_CK_DIV_OVERRIDE_EN | + CFG_AMI_CK_DIV_OVERRIDE_VAL(1); + } + I915_WRITE(MG_TX1_DCC(ln, port), val); + + val = I915_READ(MG_TX2_DCC(ln, port)); + val &= ~CFG_AMI_CK_DIV_OVERRIDE_VAL_MASK; + if (link_clock <= 500000) { + val &= ~CFG_AMI_CK_DIV_OVERRIDE_EN; + } else { + val |= CFG_AMI_CK_DIV_OVERRIDE_EN | + CFG_AMI_CK_DIV_OVERRIDE_VAL(1); + } + I915_WRITE(MG_TX2_DCC(ln, port), val); + } + + /* Program MG_TX_PISO_READLOAD with values from vswing table */ + for (ln = 0; ln < 2; ln++) { + val = I915_READ(MG_TX1_PISO_READLOAD(ln, port)); + val |= CRI_CALCINIT; + I915_WRITE(MG_TX1_PISO_READLOAD(ln, port), val); + + val = I915_READ(MG_TX2_PISO_READLOAD(ln, port)); + val |= CRI_CALCINIT; + I915_WRITE(MG_TX2_PISO_READLOAD(ln, port), val); + } +} + +static void icl_ddi_vswing_sequence(struct intel_encoder *encoder, + int link_clock, + u32 level, + enum intel_output_type type) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + enum port port = encoder->port; + + if (intel_port_is_combophy(dev_priv, port)) + icl_combo_phy_ddi_vswing_sequence(encoder, level, type); + else + icl_mg_phy_ddi_vswing_sequence(encoder, link_clock, level); +} + +static u32 translate_signal_level(int signal_levels) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(index_to_dp_signal_levels); i++) { + if (index_to_dp_signal_levels[i] == signal_levels) + return i; + } + + WARN(1, "Unsupported voltage swing/pre-emphasis level: 0x%x\n", + signal_levels); + + return 0; +} + +static u32 intel_ddi_dp_level(struct intel_dp *intel_dp) +{ + u8 train_set = intel_dp->train_set[0]; + int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK | + DP_TRAIN_PRE_EMPHASIS_MASK); + + return translate_signal_level(signal_levels); +} + +u32 bxt_signal_levels(struct intel_dp *intel_dp) +{ + struct intel_digital_port *dport = dp_to_dig_port(intel_dp); + struct drm_i915_private *dev_priv = to_i915(dport->base.base.dev); + struct intel_encoder *encoder = &dport->base; + int level = intel_ddi_dp_level(intel_dp); + + if (INTEL_GEN(dev_priv) >= 11) + icl_ddi_vswing_sequence(encoder, intel_dp->link_rate, + level, encoder->type); + else if (IS_CANNONLAKE(dev_priv)) + cnl_ddi_vswing_sequence(encoder, level, encoder->type); + else + bxt_ddi_vswing_sequence(encoder, level, encoder->type); + + return 0; +} + +u32 ddi_signal_levels(struct intel_dp *intel_dp) +{ + struct intel_digital_port *dport = dp_to_dig_port(intel_dp); + struct drm_i915_private *dev_priv = to_i915(dport->base.base.dev); + struct intel_encoder *encoder = &dport->base; + int level = intel_ddi_dp_level(intel_dp); + + if (IS_GEN9_BC(dev_priv)) + skl_ddi_set_iboost(encoder, level, encoder->type); + + return DDI_BUF_TRANS_SELECT(level); +} + +static inline +u32 icl_dpclka_cfgcr0_clk_off(struct drm_i915_private *dev_priv, + enum port port) +{ + if (intel_port_is_combophy(dev_priv, port)) { + return ICL_DPCLKA_CFGCR0_DDI_CLK_OFF(port); + } else if (intel_port_is_tc(dev_priv, port)) { + enum tc_port tc_port = intel_port_to_tc(dev_priv, port); + + return ICL_DPCLKA_CFGCR0_TC_CLK_OFF(tc_port); + } + + return 0; +} + +static void icl_map_plls_to_ports(struct intel_encoder *encoder, + const struct intel_crtc_state *crtc_state) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct intel_shared_dpll *pll = crtc_state->shared_dpll; + enum port port = encoder->port; + u32 val; + + mutex_lock(&dev_priv->dpll_lock); + + val = I915_READ(DPCLKA_CFGCR0_ICL); + WARN_ON((val & icl_dpclka_cfgcr0_clk_off(dev_priv, port)) == 0); + + if (intel_port_is_combophy(dev_priv, port)) { + val &= ~DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(port); + val |= DPCLKA_CFGCR0_DDI_CLK_SEL(pll->info->id, port); + I915_WRITE(DPCLKA_CFGCR0_ICL, val); + POSTING_READ(DPCLKA_CFGCR0_ICL); + } + + val &= ~icl_dpclka_cfgcr0_clk_off(dev_priv, port); + I915_WRITE(DPCLKA_CFGCR0_ICL, val); + + mutex_unlock(&dev_priv->dpll_lock); +} + +static void icl_unmap_plls_to_ports(struct intel_encoder *encoder) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + enum port port = encoder->port; + u32 val; + + mutex_lock(&dev_priv->dpll_lock); + + val = I915_READ(DPCLKA_CFGCR0_ICL); + val |= icl_dpclka_cfgcr0_clk_off(dev_priv, port); + I915_WRITE(DPCLKA_CFGCR0_ICL, val); + + mutex_unlock(&dev_priv->dpll_lock); +} + +void icl_sanitize_encoder_pll_mapping(struct intel_encoder *encoder) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + u32 val; + enum port port; + u32 port_mask; + bool ddi_clk_needed; + + /* + * In case of DP MST, we sanitize the primary encoder only, not the + * virtual ones. + */ + if (encoder->type == INTEL_OUTPUT_DP_MST) + return; + + if (!encoder->base.crtc && intel_encoder_is_dp(encoder)) { + u8 pipe_mask; + bool is_mst; + + intel_ddi_get_encoder_pipes(encoder, &pipe_mask, &is_mst); + /* + * In the unlikely case that BIOS enables DP in MST mode, just + * warn since our MST HW readout is incomplete. + */ + if (WARN_ON(is_mst)) + return; + } + + port_mask = BIT(encoder->port); + ddi_clk_needed = encoder->base.crtc; + + if (encoder->type == INTEL_OUTPUT_DSI) { + struct intel_encoder *other_encoder; + + port_mask = intel_dsi_encoder_ports(encoder); + /* + * Sanity check that we haven't incorrectly registered another + * encoder using any of the ports of this DSI encoder. + */ + for_each_intel_encoder(&dev_priv->drm, other_encoder) { + if (other_encoder == encoder) + continue; + + if (WARN_ON(port_mask & BIT(other_encoder->port))) + return; + } + /* + * For DSI we keep the ddi clocks gated + * except during enable/disable sequence. + */ + ddi_clk_needed = false; + } + + val = I915_READ(DPCLKA_CFGCR0_ICL); + for_each_port_masked(port, port_mask) { + bool ddi_clk_ungated = !(val & + icl_dpclka_cfgcr0_clk_off(dev_priv, + port)); + + if (ddi_clk_needed == ddi_clk_ungated) + continue; + + /* + * Punt on the case now where clock is gated, but it would + * be needed by the port. Something else is really broken then. + */ + if (WARN_ON(ddi_clk_needed)) + continue; + + DRM_NOTE("Port %c is disabled/in DSI mode with an ungated DDI clock, gate it\n", + port_name(port)); + val |= icl_dpclka_cfgcr0_clk_off(dev_priv, port); + I915_WRITE(DPCLKA_CFGCR0_ICL, val); + } +} + +static void intel_ddi_clk_select(struct intel_encoder *encoder, + const struct intel_crtc_state *crtc_state) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + enum port port = encoder->port; + u32 val; + const struct intel_shared_dpll *pll = crtc_state->shared_dpll; + + if (WARN_ON(!pll)) + return; + + mutex_lock(&dev_priv->dpll_lock); + + if (INTEL_GEN(dev_priv) >= 11) { + if (!intel_port_is_combophy(dev_priv, port)) + I915_WRITE(DDI_CLK_SEL(port), + icl_pll_to_ddi_clk_sel(encoder, crtc_state)); + } else if (IS_CANNONLAKE(dev_priv)) { + /* Configure DPCLKA_CFGCR0 to map the DPLL to the DDI. */ + val = I915_READ(DPCLKA_CFGCR0); + val &= ~DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(port); + val |= DPCLKA_CFGCR0_DDI_CLK_SEL(pll->info->id, port); + I915_WRITE(DPCLKA_CFGCR0, val); + + /* + * Configure DPCLKA_CFGCR0 to turn on the clock for the DDI. + * This step and the step before must be done with separate + * register writes. + */ + val = I915_READ(DPCLKA_CFGCR0); + val &= ~DPCLKA_CFGCR0_DDI_CLK_OFF(port); + I915_WRITE(DPCLKA_CFGCR0, val); + } else if (IS_GEN9_BC(dev_priv)) { + /* DDI -> PLL mapping */ + val = I915_READ(DPLL_CTRL2); + + val &= ~(DPLL_CTRL2_DDI_CLK_OFF(port) | + DPLL_CTRL2_DDI_CLK_SEL_MASK(port)); + val |= (DPLL_CTRL2_DDI_CLK_SEL(pll->info->id, port) | + DPLL_CTRL2_DDI_SEL_OVERRIDE(port)); + + I915_WRITE(DPLL_CTRL2, val); + + } else if (INTEL_GEN(dev_priv) < 9) { + I915_WRITE(PORT_CLK_SEL(port), hsw_pll_to_ddi_pll_sel(pll)); + } + + mutex_unlock(&dev_priv->dpll_lock); +} + +static void intel_ddi_clk_disable(struct intel_encoder *encoder) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + enum port port = encoder->port; + + if (INTEL_GEN(dev_priv) >= 11) { + if (!intel_port_is_combophy(dev_priv, port)) + I915_WRITE(DDI_CLK_SEL(port), DDI_CLK_SEL_NONE); + } else if (IS_CANNONLAKE(dev_priv)) { + I915_WRITE(DPCLKA_CFGCR0, I915_READ(DPCLKA_CFGCR0) | + DPCLKA_CFGCR0_DDI_CLK_OFF(port)); + } else if (IS_GEN9_BC(dev_priv)) { + I915_WRITE(DPLL_CTRL2, I915_READ(DPLL_CTRL2) | + DPLL_CTRL2_DDI_CLK_OFF(port)); + } else if (INTEL_GEN(dev_priv) < 9) { + I915_WRITE(PORT_CLK_SEL(port), PORT_CLK_SEL_NONE); + } +} + +static void icl_enable_phy_clock_gating(struct intel_digital_port *dig_port) +{ + struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev); + enum port port = dig_port->base.port; + enum tc_port tc_port = intel_port_to_tc(dev_priv, port); + u32 val; + int ln; + + if (tc_port == PORT_TC_NONE) + return; + + for (ln = 0; ln < 2; ln++) { + val = I915_READ(MG_DP_MODE(ln, port)); + val |= MG_DP_MODE_CFG_TR2PWR_GATING | + MG_DP_MODE_CFG_TRPWR_GATING | + MG_DP_MODE_CFG_CLNPWR_GATING | + MG_DP_MODE_CFG_DIGPWR_GATING | + MG_DP_MODE_CFG_GAONPWR_GATING; + I915_WRITE(MG_DP_MODE(ln, port), val); + } + + val = I915_READ(MG_MISC_SUS0(tc_port)); + val |= MG_MISC_SUS0_SUSCLK_DYNCLKGATE_MODE(3) | + MG_MISC_SUS0_CFG_TR2PWR_GATING | + MG_MISC_SUS0_CFG_CL2PWR_GATING | + MG_MISC_SUS0_CFG_GAONPWR_GATING | + MG_MISC_SUS0_CFG_TRPWR_GATING | + MG_MISC_SUS0_CFG_CL1PWR_GATING | + MG_MISC_SUS0_CFG_DGPWR_GATING; + I915_WRITE(MG_MISC_SUS0(tc_port), val); +} + +static void icl_disable_phy_clock_gating(struct intel_digital_port *dig_port) +{ + struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev); + enum port port = dig_port->base.port; + enum tc_port tc_port = intel_port_to_tc(dev_priv, port); + u32 val; + int ln; + + if (tc_port == PORT_TC_NONE) + return; + + for (ln = 0; ln < 2; ln++) { + val = I915_READ(MG_DP_MODE(ln, port)); + val &= ~(MG_DP_MODE_CFG_TR2PWR_GATING | + MG_DP_MODE_CFG_TRPWR_GATING | + MG_DP_MODE_CFG_CLNPWR_GATING | + MG_DP_MODE_CFG_DIGPWR_GATING | + MG_DP_MODE_CFG_GAONPWR_GATING); + I915_WRITE(MG_DP_MODE(ln, port), val); + } + + val = I915_READ(MG_MISC_SUS0(tc_port)); + val &= ~(MG_MISC_SUS0_SUSCLK_DYNCLKGATE_MODE_MASK | + MG_MISC_SUS0_CFG_TR2PWR_GATING | + MG_MISC_SUS0_CFG_CL2PWR_GATING | + MG_MISC_SUS0_CFG_GAONPWR_GATING | + MG_MISC_SUS0_CFG_TRPWR_GATING | + MG_MISC_SUS0_CFG_CL1PWR_GATING | + MG_MISC_SUS0_CFG_DGPWR_GATING); + I915_WRITE(MG_MISC_SUS0(tc_port), val); +} + +static void icl_program_mg_dp_mode(struct intel_digital_port *intel_dig_port) +{ + struct drm_i915_private *dev_priv = to_i915(intel_dig_port->base.base.dev); + enum port port = intel_dig_port->base.port; + enum tc_port tc_port = intel_port_to_tc(dev_priv, port); + u32 ln0, ln1, lane_info; + + if (tc_port == PORT_TC_NONE || intel_dig_port->tc_type == TC_PORT_TBT) + return; + + ln0 = I915_READ(MG_DP_MODE(0, port)); + ln1 = I915_READ(MG_DP_MODE(1, port)); + + switch (intel_dig_port->tc_type) { + case TC_PORT_TYPEC: + ln0 &= ~(MG_DP_MODE_CFG_DP_X1_MODE | MG_DP_MODE_CFG_DP_X2_MODE); + ln1 &= ~(MG_DP_MODE_CFG_DP_X1_MODE | MG_DP_MODE_CFG_DP_X2_MODE); + + lane_info = (I915_READ(PORT_TX_DFLEXDPSP) & + DP_LANE_ASSIGNMENT_MASK(tc_port)) >> + DP_LANE_ASSIGNMENT_SHIFT(tc_port); + + switch (lane_info) { + case 0x1: + case 0x4: + break; + case 0x2: + ln0 |= MG_DP_MODE_CFG_DP_X1_MODE; + break; + case 0x3: + ln0 |= MG_DP_MODE_CFG_DP_X1_MODE | + MG_DP_MODE_CFG_DP_X2_MODE; + break; + case 0x8: + ln1 |= MG_DP_MODE_CFG_DP_X1_MODE; + break; + case 0xC: + ln1 |= MG_DP_MODE_CFG_DP_X1_MODE | + MG_DP_MODE_CFG_DP_X2_MODE; + break; + case 0xF: + ln0 |= MG_DP_MODE_CFG_DP_X1_MODE | + MG_DP_MODE_CFG_DP_X2_MODE; + ln1 |= MG_DP_MODE_CFG_DP_X1_MODE | + MG_DP_MODE_CFG_DP_X2_MODE; + break; + default: + MISSING_CASE(lane_info); + } + break; + + case TC_PORT_LEGACY: + ln0 |= MG_DP_MODE_CFG_DP_X1_MODE | MG_DP_MODE_CFG_DP_X2_MODE; + ln1 |= MG_DP_MODE_CFG_DP_X1_MODE | MG_DP_MODE_CFG_DP_X2_MODE; + break; + + default: + MISSING_CASE(intel_dig_port->tc_type); + return; + } + + I915_WRITE(MG_DP_MODE(0, port), ln0); + I915_WRITE(MG_DP_MODE(1, port), ln1); +} + +static void intel_dp_sink_set_fec_ready(struct intel_dp *intel_dp, + const struct intel_crtc_state *crtc_state) +{ + if (!crtc_state->fec_enable) + return; + + if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_FEC_CONFIGURATION, DP_FEC_READY) <= 0) + DRM_DEBUG_KMS("Failed to set FEC_READY in the sink\n"); +} + +static void intel_ddi_enable_fec(struct intel_encoder *encoder, + const struct intel_crtc_state *crtc_state) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + enum port port = encoder->port; + u32 val; + + if (!crtc_state->fec_enable) + return; + + val = I915_READ(DP_TP_CTL(port)); + val |= DP_TP_CTL_FEC_ENABLE; + I915_WRITE(DP_TP_CTL(port), val); + + if (intel_wait_for_register(&dev_priv->uncore, DP_TP_STATUS(port), + DP_TP_STATUS_FEC_ENABLE_LIVE, + DP_TP_STATUS_FEC_ENABLE_LIVE, + 1)) + DRM_ERROR("Timed out waiting for FEC Enable Status\n"); +} + +static void intel_ddi_disable_fec_state(struct intel_encoder *encoder, + const struct intel_crtc_state *crtc_state) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + enum port port = encoder->port; + u32 val; + + if (!crtc_state->fec_enable) + return; + + val = I915_READ(DP_TP_CTL(port)); + val &= ~DP_TP_CTL_FEC_ENABLE; + I915_WRITE(DP_TP_CTL(port), val); + POSTING_READ(DP_TP_CTL(port)); +} + +static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder, + const struct intel_crtc_state *crtc_state, + const struct drm_connector_state *conn_state) +{ + struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + enum port port = encoder->port; + struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base); + bool is_mst = intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST); + int level = intel_ddi_dp_level(intel_dp); + + WARN_ON(is_mst && (port == PORT_A || port == PORT_E)); + + intel_dp_set_link_params(intel_dp, crtc_state->port_clock, + crtc_state->lane_count, is_mst); + + intel_edp_panel_on(intel_dp); + + intel_ddi_clk_select(encoder, crtc_state); + + intel_display_power_get(dev_priv, dig_port->ddi_io_power_domain); + + icl_program_mg_dp_mode(dig_port); + icl_disable_phy_clock_gating(dig_port); + + if (INTEL_GEN(dev_priv) >= 11) + icl_ddi_vswing_sequence(encoder, crtc_state->port_clock, + level, encoder->type); + else if (IS_CANNONLAKE(dev_priv)) + cnl_ddi_vswing_sequence(encoder, level, encoder->type); + else if (IS_GEN9_LP(dev_priv)) + bxt_ddi_vswing_sequence(encoder, level, encoder->type); + else + intel_prepare_dp_ddi_buffers(encoder, crtc_state); + + if (intel_port_is_combophy(dev_priv, port)) { + bool lane_reversal = + dig_port->saved_port_bits & DDI_BUF_PORT_REVERSAL; + + intel_combo_phy_power_up_lanes(dev_priv, port, false, + crtc_state->lane_count, + lane_reversal); + } + + intel_ddi_init_dp_buf_reg(encoder); + if (!is_mst) + intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON); + intel_dp_sink_set_decompression_state(intel_dp, crtc_state, + true); + intel_dp_sink_set_fec_ready(intel_dp, crtc_state); + intel_dp_start_link_train(intel_dp); + if (port != PORT_A || INTEL_GEN(dev_priv) >= 9) + intel_dp_stop_link_train(intel_dp); + + intel_ddi_enable_fec(encoder, crtc_state); + + icl_enable_phy_clock_gating(dig_port); + + if (!is_mst) + intel_ddi_enable_pipe_clock(crtc_state); + + intel_dsc_enable(encoder, crtc_state); +} + +static void intel_ddi_pre_enable_hdmi(struct intel_encoder *encoder, + const struct intel_crtc_state *crtc_state, + const struct drm_connector_state *conn_state) +{ + struct intel_digital_port *intel_dig_port = enc_to_dig_port(&encoder->base); + struct intel_hdmi *intel_hdmi = &intel_dig_port->hdmi; + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + enum port port = encoder->port; + int level = intel_ddi_hdmi_level(dev_priv, port); + struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base); + + intel_dp_dual_mode_set_tmds_output(intel_hdmi, true); + intel_ddi_clk_select(encoder, crtc_state); + + intel_display_power_get(dev_priv, dig_port->ddi_io_power_domain); + + icl_program_mg_dp_mode(dig_port); + icl_disable_phy_clock_gating(dig_port); + + if (INTEL_GEN(dev_priv) >= 11) + icl_ddi_vswing_sequence(encoder, crtc_state->port_clock, + level, INTEL_OUTPUT_HDMI); + else if (IS_CANNONLAKE(dev_priv)) + cnl_ddi_vswing_sequence(encoder, level, INTEL_OUTPUT_HDMI); + else if (IS_GEN9_LP(dev_priv)) + bxt_ddi_vswing_sequence(encoder, level, INTEL_OUTPUT_HDMI); + else + intel_prepare_hdmi_ddi_buffers(encoder, level); + + icl_enable_phy_clock_gating(dig_port); + + if (IS_GEN9_BC(dev_priv)) + skl_ddi_set_iboost(encoder, level, INTEL_OUTPUT_HDMI); + + intel_ddi_enable_pipe_clock(crtc_state); + + intel_dig_port->set_infoframes(encoder, + crtc_state->has_infoframe, + crtc_state, conn_state); +} + +static void intel_ddi_pre_enable(struct intel_encoder *encoder, + const struct intel_crtc_state *crtc_state, + const struct drm_connector_state *conn_state) +{ + struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc); + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); + enum pipe pipe = crtc->pipe; + + /* + * When called from DP MST code: + * - conn_state will be NULL + * - encoder will be the main encoder (ie. mst->primary) + * - the main connector associated with this port + * won't be active or linked to a crtc + * - crtc_state will be the state of the first stream to + * be activated on this port, and it may not be the same + * stream that will be deactivated last, but each stream + * should have a state that is identical when it comes to + * the DP link parameteres + */ + + WARN_ON(crtc_state->has_pch_encoder); + + if (INTEL_GEN(dev_priv) >= 11) + icl_map_plls_to_ports(encoder, crtc_state); + + intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true); + + if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) { + intel_ddi_pre_enable_hdmi(encoder, crtc_state, conn_state); + } else { + struct intel_lspcon *lspcon = + enc_to_intel_lspcon(&encoder->base); + + intel_ddi_pre_enable_dp(encoder, crtc_state, conn_state); + if (lspcon->active) { + struct intel_digital_port *dig_port = + enc_to_dig_port(&encoder->base); + + dig_port->set_infoframes(encoder, + crtc_state->has_infoframe, + crtc_state, conn_state); + } + } +} + +static void intel_disable_ddi_buf(struct intel_encoder *encoder, + const struct intel_crtc_state *crtc_state) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + enum port port = encoder->port; + bool wait = false; + u32 val; + + val = I915_READ(DDI_BUF_CTL(port)); + if (val & DDI_BUF_CTL_ENABLE) { + val &= ~DDI_BUF_CTL_ENABLE; + I915_WRITE(DDI_BUF_CTL(port), val); + wait = true; + } + + val = I915_READ(DP_TP_CTL(port)); + val &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK); + val |= DP_TP_CTL_LINK_TRAIN_PAT1; + I915_WRITE(DP_TP_CTL(port), val); + + /* Disable FEC in DP Sink */ + intel_ddi_disable_fec_state(encoder, crtc_state); + + if (wait) + intel_wait_ddi_buf_idle(dev_priv, port); +} + +static void intel_ddi_post_disable_dp(struct intel_encoder *encoder, + const struct intel_crtc_state *old_crtc_state, + const struct drm_connector_state *old_conn_state) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base); + struct intel_dp *intel_dp = &dig_port->dp; + bool is_mst = intel_crtc_has_type(old_crtc_state, + INTEL_OUTPUT_DP_MST); + + if (!is_mst) { + intel_ddi_disable_pipe_clock(old_crtc_state); + /* + * Power down sink before disabling the port, otherwise we end + * up getting interrupts from the sink on detecting link loss. + */ + intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF); + } + + intel_disable_ddi_buf(encoder, old_crtc_state); + + intel_edp_panel_vdd_on(intel_dp); + intel_edp_panel_off(intel_dp); + + intel_display_power_put_unchecked(dev_priv, + dig_port->ddi_io_power_domain); + + intel_ddi_clk_disable(encoder); +} + +static void intel_ddi_post_disable_hdmi(struct intel_encoder *encoder, + const struct intel_crtc_state *old_crtc_state, + const struct drm_connector_state *old_conn_state) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base); + struct intel_hdmi *intel_hdmi = &dig_port->hdmi; + + dig_port->set_infoframes(encoder, false, + old_crtc_state, old_conn_state); + + intel_ddi_disable_pipe_clock(old_crtc_state); + + intel_disable_ddi_buf(encoder, old_crtc_state); + + intel_display_power_put_unchecked(dev_priv, + dig_port->ddi_io_power_domain); + + intel_ddi_clk_disable(encoder); + + intel_dp_dual_mode_set_tmds_output(intel_hdmi, false); +} + +static void intel_ddi_post_disable(struct intel_encoder *encoder, + const struct intel_crtc_state *old_crtc_state, + const struct drm_connector_state *old_conn_state) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + + /* + * When called from DP MST code: + * - old_conn_state will be NULL + * - encoder will be the main encoder (ie. mst->primary) + * - the main connector associated with this port + * won't be active or linked to a crtc + * - old_crtc_state will be the state of the last stream to + * be deactivated on this port, and it may not be the same + * stream that was activated last, but each stream + * should have a state that is identical when it comes to + * the DP link parameteres + */ + + if (intel_crtc_has_type(old_crtc_state, INTEL_OUTPUT_HDMI)) + intel_ddi_post_disable_hdmi(encoder, + old_crtc_state, old_conn_state); + else + intel_ddi_post_disable_dp(encoder, + old_crtc_state, old_conn_state); + + if (INTEL_GEN(dev_priv) >= 11) + icl_unmap_plls_to_ports(encoder); +} + +void intel_ddi_fdi_post_disable(struct intel_encoder *encoder, + const struct intel_crtc_state *old_crtc_state, + const struct drm_connector_state *old_conn_state) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + u32 val; + + /* + * Bspec lists this as both step 13 (before DDI_BUF_CTL disable) + * and step 18 (after clearing PORT_CLK_SEL). Based on a BUN, + * step 13 is the correct place for it. Step 18 is where it was + * originally before the BUN. + */ + val = I915_READ(FDI_RX_CTL(PIPE_A)); + val &= ~FDI_RX_ENABLE; + I915_WRITE(FDI_RX_CTL(PIPE_A), val); + + intel_disable_ddi_buf(encoder, old_crtc_state); + intel_ddi_clk_disable(encoder); + + val = I915_READ(FDI_RX_MISC(PIPE_A)); + val &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK); + val |= FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2); + I915_WRITE(FDI_RX_MISC(PIPE_A), val); + + val = I915_READ(FDI_RX_CTL(PIPE_A)); + val &= ~FDI_PCDCLK; + I915_WRITE(FDI_RX_CTL(PIPE_A), val); + + val = I915_READ(FDI_RX_CTL(PIPE_A)); + val &= ~FDI_RX_PLL_ENABLE; + I915_WRITE(FDI_RX_CTL(PIPE_A), val); +} + +static void intel_enable_ddi_dp(struct intel_encoder *encoder, + const struct intel_crtc_state *crtc_state, + const struct drm_connector_state *conn_state) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); + enum port port = encoder->port; + + if (port == PORT_A && INTEL_GEN(dev_priv) < 9) + intel_dp_stop_link_train(intel_dp); + + intel_edp_backlight_on(crtc_state, conn_state); + intel_psr_enable(intel_dp, crtc_state); + intel_dp_ycbcr_420_enable(intel_dp, crtc_state); + intel_edp_drrs_enable(intel_dp, crtc_state); + + if (crtc_state->has_audio) + intel_audio_codec_enable(encoder, crtc_state, conn_state); +} + +static i915_reg_t +gen9_chicken_trans_reg_by_port(struct drm_i915_private *dev_priv, + enum port port) +{ + static const i915_reg_t regs[] = { + [PORT_A] = CHICKEN_TRANS_EDP, + [PORT_B] = CHICKEN_TRANS_A, + [PORT_C] = CHICKEN_TRANS_B, + [PORT_D] = CHICKEN_TRANS_C, + [PORT_E] = CHICKEN_TRANS_A, + }; + + WARN_ON(INTEL_GEN(dev_priv) < 9); + + if (WARN_ON(port < PORT_A || port > PORT_E)) + port = PORT_A; + + return regs[port]; +} + +static void intel_enable_ddi_hdmi(struct intel_encoder *encoder, + const struct intel_crtc_state *crtc_state, + const struct drm_connector_state *conn_state) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base); + struct drm_connector *connector = conn_state->connector; + enum port port = encoder->port; + + if (!intel_hdmi_handle_sink_scrambling(encoder, connector, + crtc_state->hdmi_high_tmds_clock_ratio, + crtc_state->hdmi_scrambling)) + DRM_ERROR("[CONNECTOR:%d:%s] Failed to configure sink scrambling/TMDS bit clock ratio\n", + connector->base.id, connector->name); + + /* Display WA #1143: skl,kbl,cfl */ + if (IS_GEN9_BC(dev_priv)) { + /* + * For some reason these chicken bits have been + * stuffed into a transcoder register, event though + * the bits affect a specific DDI port rather than + * a specific transcoder. + */ + i915_reg_t reg = gen9_chicken_trans_reg_by_port(dev_priv, port); + u32 val; + + val = I915_READ(reg); + + if (port == PORT_E) + val |= DDIE_TRAINING_OVERRIDE_ENABLE | + DDIE_TRAINING_OVERRIDE_VALUE; + else + val |= DDI_TRAINING_OVERRIDE_ENABLE | + DDI_TRAINING_OVERRIDE_VALUE; + + I915_WRITE(reg, val); + POSTING_READ(reg); + + udelay(1); + + if (port == PORT_E) + val &= ~(DDIE_TRAINING_OVERRIDE_ENABLE | + DDIE_TRAINING_OVERRIDE_VALUE); + else + val &= ~(DDI_TRAINING_OVERRIDE_ENABLE | + DDI_TRAINING_OVERRIDE_VALUE); + + I915_WRITE(reg, val); + } + + /* In HDMI/DVI mode, the port width, and swing/emphasis values + * are ignored so nothing special needs to be done besides + * enabling the port. + */ + I915_WRITE(DDI_BUF_CTL(port), + dig_port->saved_port_bits | DDI_BUF_CTL_ENABLE); + + if (crtc_state->has_audio) + intel_audio_codec_enable(encoder, crtc_state, conn_state); +} + +static void intel_enable_ddi(struct intel_encoder *encoder, + const struct intel_crtc_state *crtc_state, + const struct drm_connector_state *conn_state) +{ + if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) + intel_enable_ddi_hdmi(encoder, crtc_state, conn_state); + else + intel_enable_ddi_dp(encoder, crtc_state, conn_state); + + /* Enable hdcp if it's desired */ + if (conn_state->content_protection == + DRM_MODE_CONTENT_PROTECTION_DESIRED) + intel_hdcp_enable(to_intel_connector(conn_state->connector)); +} + +static void intel_disable_ddi_dp(struct intel_encoder *encoder, + const struct intel_crtc_state *old_crtc_state, + const struct drm_connector_state *old_conn_state) +{ + struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); + + intel_dp->link_trained = false; + + if (old_crtc_state->has_audio) + intel_audio_codec_disable(encoder, + old_crtc_state, old_conn_state); + + intel_edp_drrs_disable(intel_dp, old_crtc_state); + intel_psr_disable(intel_dp, old_crtc_state); + intel_edp_backlight_off(old_conn_state); + /* Disable the decompression in DP Sink */ + intel_dp_sink_set_decompression_state(intel_dp, old_crtc_state, + false); +} + +static void intel_disable_ddi_hdmi(struct intel_encoder *encoder, + const struct intel_crtc_state *old_crtc_state, + const struct drm_connector_state *old_conn_state) +{ + struct drm_connector *connector = old_conn_state->connector; + + if (old_crtc_state->has_audio) + intel_audio_codec_disable(encoder, + old_crtc_state, old_conn_state); + + if (!intel_hdmi_handle_sink_scrambling(encoder, connector, + false, false)) + DRM_DEBUG_KMS("[CONNECTOR:%d:%s] Failed to reset sink scrambling/TMDS bit clock ratio\n", + connector->base.id, connector->name); +} + +static void intel_disable_ddi(struct intel_encoder *encoder, + const struct intel_crtc_state *old_crtc_state, + const struct drm_connector_state *old_conn_state) +{ + intel_hdcp_disable(to_intel_connector(old_conn_state->connector)); + + if (intel_crtc_has_type(old_crtc_state, INTEL_OUTPUT_HDMI)) + intel_disable_ddi_hdmi(encoder, old_crtc_state, old_conn_state); + else + intel_disable_ddi_dp(encoder, old_crtc_state, old_conn_state); +} + +static void intel_ddi_update_pipe_dp(struct intel_encoder *encoder, + const struct intel_crtc_state *crtc_state, + const struct drm_connector_state *conn_state) +{ + struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); + + intel_ddi_set_pipe_settings(crtc_state); + + intel_psr_update(intel_dp, crtc_state); + intel_edp_drrs_enable(intel_dp, crtc_state); + + intel_panel_update_backlight(encoder, crtc_state, conn_state); +} + +static void intel_ddi_update_pipe(struct intel_encoder *encoder, + const struct intel_crtc_state *crtc_state, + const struct drm_connector_state *conn_state) +{ + if (!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) + intel_ddi_update_pipe_dp(encoder, crtc_state, conn_state); + + if (conn_state->content_protection == + DRM_MODE_CONTENT_PROTECTION_DESIRED) + intel_hdcp_enable(to_intel_connector(conn_state->connector)); + else if (conn_state->content_protection == + DRM_MODE_CONTENT_PROTECTION_UNDESIRED) + intel_hdcp_disable(to_intel_connector(conn_state->connector)); +} + +static void intel_ddi_set_fia_lane_count(struct intel_encoder *encoder, + const struct intel_crtc_state *pipe_config, + enum port port) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base); + enum tc_port tc_port = intel_port_to_tc(dev_priv, port); + u32 val = I915_READ(PORT_TX_DFLEXDPMLE1); + bool lane_reversal = dig_port->saved_port_bits & DDI_BUF_PORT_REVERSAL; + + val &= ~DFLEXDPMLE1_DPMLETC_MASK(tc_port); + switch (pipe_config->lane_count) { + case 1: + val |= (lane_reversal) ? DFLEXDPMLE1_DPMLETC_ML3(tc_port) : + DFLEXDPMLE1_DPMLETC_ML0(tc_port); + break; + case 2: + val |= (lane_reversal) ? DFLEXDPMLE1_DPMLETC_ML3_2(tc_port) : + DFLEXDPMLE1_DPMLETC_ML1_0(tc_port); + break; + case 4: + val |= DFLEXDPMLE1_DPMLETC_ML3_0(tc_port); + break; + default: + MISSING_CASE(pipe_config->lane_count); + } + I915_WRITE(PORT_TX_DFLEXDPMLE1, val); +} + +static void +intel_ddi_pre_pll_enable(struct intel_encoder *encoder, + const struct intel_crtc_state *crtc_state, + const struct drm_connector_state *conn_state) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base); + enum port port = encoder->port; + + if (intel_crtc_has_dp_encoder(crtc_state) || + intel_port_is_tc(dev_priv, encoder->port)) + intel_display_power_get(dev_priv, + intel_ddi_main_link_aux_domain(dig_port)); + + if (IS_GEN9_LP(dev_priv)) + bxt_ddi_phy_set_lane_optim_mask(encoder, + crtc_state->lane_lat_optim_mask); + + /* + * Program the lane count for static/dynamic connections on Type-C ports. + * Skip this step for TBT. + */ + if (dig_port->tc_type == TC_PORT_UNKNOWN || + dig_port->tc_type == TC_PORT_TBT) + return; + + intel_ddi_set_fia_lane_count(encoder, crtc_state, port); +} + +static void +intel_ddi_post_pll_disable(struct intel_encoder *encoder, + const struct intel_crtc_state *crtc_state, + const struct drm_connector_state *conn_state) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base); + + if (intel_crtc_has_dp_encoder(crtc_state) || + intel_port_is_tc(dev_priv, encoder->port)) + intel_display_power_put_unchecked(dev_priv, + intel_ddi_main_link_aux_domain(dig_port)); +} + +static void intel_ddi_prepare_link_retrain(struct intel_dp *intel_dp) +{ + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct drm_i915_private *dev_priv = + to_i915(intel_dig_port->base.base.dev); + enum port port = intel_dig_port->base.port; + u32 val; + bool wait = false; + + if (I915_READ(DP_TP_CTL(port)) & DP_TP_CTL_ENABLE) { + val = I915_READ(DDI_BUF_CTL(port)); + if (val & DDI_BUF_CTL_ENABLE) { + val &= ~DDI_BUF_CTL_ENABLE; + I915_WRITE(DDI_BUF_CTL(port), val); + wait = true; + } + + val = I915_READ(DP_TP_CTL(port)); + val &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK); + val |= DP_TP_CTL_LINK_TRAIN_PAT1; + I915_WRITE(DP_TP_CTL(port), val); + POSTING_READ(DP_TP_CTL(port)); + + if (wait) + intel_wait_ddi_buf_idle(dev_priv, port); + } + + val = DP_TP_CTL_ENABLE | + DP_TP_CTL_LINK_TRAIN_PAT1 | DP_TP_CTL_SCRAMBLE_DISABLE; + if (intel_dp->link_mst) + val |= DP_TP_CTL_MODE_MST; + else { + val |= DP_TP_CTL_MODE_SST; + if (drm_dp_enhanced_frame_cap(intel_dp->dpcd)) + val |= DP_TP_CTL_ENHANCED_FRAME_ENABLE; + } + I915_WRITE(DP_TP_CTL(port), val); + POSTING_READ(DP_TP_CTL(port)); + + intel_dp->DP |= DDI_BUF_CTL_ENABLE; + I915_WRITE(DDI_BUF_CTL(port), intel_dp->DP); + POSTING_READ(DDI_BUF_CTL(port)); + + udelay(600); +} + +static bool intel_ddi_is_audio_enabled(struct drm_i915_private *dev_priv, + enum transcoder cpu_transcoder) +{ + if (cpu_transcoder == TRANSCODER_EDP) + return false; + + if (!intel_display_power_is_enabled(dev_priv, POWER_DOMAIN_AUDIO)) + return false; + + return I915_READ(HSW_AUD_PIN_ELD_CP_VLD) & + AUDIO_OUTPUT_ENABLE(cpu_transcoder); +} + +void intel_ddi_compute_min_voltage_level(struct drm_i915_private *dev_priv, + struct intel_crtc_state *crtc_state) +{ + if (INTEL_GEN(dev_priv) >= 11 && crtc_state->port_clock > 594000) + crtc_state->min_voltage_level = 1; + else if (IS_CANNONLAKE(dev_priv) && crtc_state->port_clock > 594000) + crtc_state->min_voltage_level = 2; +} + +void intel_ddi_get_config(struct intel_encoder *encoder, + struct intel_crtc_state *pipe_config) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct intel_crtc *intel_crtc = to_intel_crtc(pipe_config->base.crtc); + enum transcoder cpu_transcoder = pipe_config->cpu_transcoder; + struct intel_digital_port *intel_dig_port; + u32 temp, flags = 0; + + /* XXX: DSI transcoder paranoia */ + if (WARN_ON(transcoder_is_dsi(cpu_transcoder))) + return; + + temp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder)); + if (temp & TRANS_DDI_PHSYNC) + flags |= DRM_MODE_FLAG_PHSYNC; + else + flags |= DRM_MODE_FLAG_NHSYNC; + if (temp & TRANS_DDI_PVSYNC) + flags |= DRM_MODE_FLAG_PVSYNC; + else + flags |= DRM_MODE_FLAG_NVSYNC; + + pipe_config->base.adjusted_mode.flags |= flags; + + switch (temp & TRANS_DDI_BPC_MASK) { + case TRANS_DDI_BPC_6: + pipe_config->pipe_bpp = 18; + break; + case TRANS_DDI_BPC_8: + pipe_config->pipe_bpp = 24; + break; + case TRANS_DDI_BPC_10: + pipe_config->pipe_bpp = 30; + break; + case TRANS_DDI_BPC_12: + pipe_config->pipe_bpp = 36; + break; + default: + break; + } + + switch (temp & TRANS_DDI_MODE_SELECT_MASK) { + case TRANS_DDI_MODE_SELECT_HDMI: + pipe_config->has_hdmi_sink = true; + intel_dig_port = enc_to_dig_port(&encoder->base); + + pipe_config->infoframes.enable |= + intel_hdmi_infoframes_enabled(encoder, pipe_config); + + if (pipe_config->infoframes.enable) + pipe_config->has_infoframe = true; + + if (temp & TRANS_DDI_HDMI_SCRAMBLING) + pipe_config->hdmi_scrambling = true; + if (temp & TRANS_DDI_HIGH_TMDS_CHAR_RATE) + pipe_config->hdmi_high_tmds_clock_ratio = true; + /* fall through */ + case TRANS_DDI_MODE_SELECT_DVI: + pipe_config->output_types |= BIT(INTEL_OUTPUT_HDMI); + pipe_config->lane_count = 4; + break; + case TRANS_DDI_MODE_SELECT_FDI: + pipe_config->output_types |= BIT(INTEL_OUTPUT_ANALOG); + break; + case TRANS_DDI_MODE_SELECT_DP_SST: + if (encoder->type == INTEL_OUTPUT_EDP) + pipe_config->output_types |= BIT(INTEL_OUTPUT_EDP); + else + pipe_config->output_types |= BIT(INTEL_OUTPUT_DP); + pipe_config->lane_count = + ((temp & DDI_PORT_WIDTH_MASK) >> DDI_PORT_WIDTH_SHIFT) + 1; + intel_dp_get_m_n(intel_crtc, pipe_config); + break; + case TRANS_DDI_MODE_SELECT_DP_MST: + pipe_config->output_types |= BIT(INTEL_OUTPUT_DP_MST); + pipe_config->lane_count = + ((temp & DDI_PORT_WIDTH_MASK) >> DDI_PORT_WIDTH_SHIFT) + 1; + intel_dp_get_m_n(intel_crtc, pipe_config); + break; + default: + break; + } + + pipe_config->has_audio = + intel_ddi_is_audio_enabled(dev_priv, cpu_transcoder); + + if (encoder->type == INTEL_OUTPUT_EDP && dev_priv->vbt.edp.bpp && + pipe_config->pipe_bpp > dev_priv->vbt.edp.bpp) { + /* + * This is a big fat ugly hack. + * + * Some machines in UEFI boot mode provide us a VBT that has 18 + * bpp and 1.62 GHz link bandwidth for eDP, which for reasons + * unknown we fail to light up. Yet the same BIOS boots up with + * 24 bpp and 2.7 GHz link. Use the same bpp as the BIOS uses as + * max, not what it tells us to use. + * + * Note: This will still be broken if the eDP panel is not lit + * up by the BIOS, and thus we can't get the mode at module + * load. + */ + DRM_DEBUG_KMS("pipe has %d bpp for eDP panel, overriding BIOS-provided max %d bpp\n", + pipe_config->pipe_bpp, dev_priv->vbt.edp.bpp); + dev_priv->vbt.edp.bpp = pipe_config->pipe_bpp; + } + + intel_ddi_clock_get(encoder, pipe_config); + + if (IS_GEN9_LP(dev_priv)) + pipe_config->lane_lat_optim_mask = + bxt_ddi_phy_get_lane_lat_optim_mask(encoder); + + intel_ddi_compute_min_voltage_level(dev_priv, pipe_config); + + intel_hdmi_read_gcp_infoframe(encoder, pipe_config); + + intel_read_infoframe(encoder, pipe_config, + HDMI_INFOFRAME_TYPE_AVI, + &pipe_config->infoframes.avi); + intel_read_infoframe(encoder, pipe_config, + HDMI_INFOFRAME_TYPE_SPD, + &pipe_config->infoframes.spd); + intel_read_infoframe(encoder, pipe_config, + HDMI_INFOFRAME_TYPE_VENDOR, + &pipe_config->infoframes.hdmi); + intel_read_infoframe(encoder, pipe_config, + HDMI_INFOFRAME_TYPE_DRM, + &pipe_config->infoframes.drm); +} + +static enum intel_output_type +intel_ddi_compute_output_type(struct intel_encoder *encoder, + struct intel_crtc_state *crtc_state, + struct drm_connector_state *conn_state) +{ + switch (conn_state->connector->connector_type) { + case DRM_MODE_CONNECTOR_HDMIA: + return INTEL_OUTPUT_HDMI; + case DRM_MODE_CONNECTOR_eDP: + return INTEL_OUTPUT_EDP; + case DRM_MODE_CONNECTOR_DisplayPort: + return INTEL_OUTPUT_DP; + default: + MISSING_CASE(conn_state->connector->connector_type); + return INTEL_OUTPUT_UNUSED; + } +} + +static int intel_ddi_compute_config(struct intel_encoder *encoder, + struct intel_crtc_state *pipe_config, + struct drm_connector_state *conn_state) +{ + struct intel_crtc *crtc = to_intel_crtc(pipe_config->base.crtc); + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + enum port port = encoder->port; + int ret; + + if (HAS_TRANSCODER_EDP(dev_priv) && port == PORT_A) + pipe_config->cpu_transcoder = TRANSCODER_EDP; + + if (intel_crtc_has_type(pipe_config, INTEL_OUTPUT_HDMI)) + ret = intel_hdmi_compute_config(encoder, pipe_config, conn_state); + else + ret = intel_dp_compute_config(encoder, pipe_config, conn_state); + if (ret) + return ret; + + if (IS_HASWELL(dev_priv) && crtc->pipe == PIPE_A && + pipe_config->cpu_transcoder == TRANSCODER_EDP) + pipe_config->pch_pfit.force_thru = + pipe_config->pch_pfit.enabled || + pipe_config->crc_enabled; + + if (IS_GEN9_LP(dev_priv)) + pipe_config->lane_lat_optim_mask = + bxt_ddi_phy_calc_lane_lat_optim_mask(pipe_config->lane_count); + + intel_ddi_compute_min_voltage_level(dev_priv, pipe_config); + + return 0; +} + +static void intel_ddi_encoder_suspend(struct intel_encoder *encoder) +{ + struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base); + struct drm_i915_private *i915 = to_i915(encoder->base.dev); + + intel_dp_encoder_suspend(encoder); + + /* + * TODO: disconnect also from USB DP alternate mode once we have a + * way to handle the modeset restore in that mode during resume + * even if the sink has disappeared while being suspended. + */ + if (dig_port->tc_legacy_port) + icl_tc_phy_disconnect(i915, dig_port); +} + +static void intel_ddi_encoder_reset(struct drm_encoder *drm_encoder) +{ + struct intel_digital_port *dig_port = enc_to_dig_port(drm_encoder); + struct drm_i915_private *i915 = to_i915(drm_encoder->dev); + + if (intel_port_is_tc(i915, dig_port->base.port)) + intel_digital_port_connected(&dig_port->base); + + intel_dp_encoder_reset(drm_encoder); +} + +static void intel_ddi_encoder_destroy(struct drm_encoder *encoder) +{ + struct intel_digital_port *dig_port = enc_to_dig_port(encoder); + struct drm_i915_private *i915 = to_i915(encoder->dev); + + intel_dp_encoder_flush_work(encoder); + + if (intel_port_is_tc(i915, dig_port->base.port)) + icl_tc_phy_disconnect(i915, dig_port); + + drm_encoder_cleanup(encoder); + kfree(dig_port); +} + +static const struct drm_encoder_funcs intel_ddi_funcs = { + .reset = intel_ddi_encoder_reset, + .destroy = intel_ddi_encoder_destroy, +}; + +static struct intel_connector * +intel_ddi_init_dp_connector(struct intel_digital_port *intel_dig_port) +{ + struct intel_connector *connector; + enum port port = intel_dig_port->base.port; + + connector = intel_connector_alloc(); + if (!connector) + return NULL; + + intel_dig_port->dp.output_reg = DDI_BUF_CTL(port); + intel_dig_port->dp.prepare_link_retrain = + intel_ddi_prepare_link_retrain; + + if (!intel_dp_init_connector(intel_dig_port, connector)) { + kfree(connector); + return NULL; + } + + return connector; +} + +static int modeset_pipe(struct drm_crtc *crtc, + struct drm_modeset_acquire_ctx *ctx) +{ + struct drm_atomic_state *state; + struct drm_crtc_state *crtc_state; + int ret; + + state = drm_atomic_state_alloc(crtc->dev); + if (!state) + return -ENOMEM; + + state->acquire_ctx = ctx; + + crtc_state = drm_atomic_get_crtc_state(state, crtc); + if (IS_ERR(crtc_state)) { + ret = PTR_ERR(crtc_state); + goto out; + } + + crtc_state->connectors_changed = true; + + ret = drm_atomic_commit(state); +out: + drm_atomic_state_put(state); + + return ret; +} + +static int intel_hdmi_reset_link(struct intel_encoder *encoder, + struct drm_modeset_acquire_ctx *ctx) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct intel_hdmi *hdmi = enc_to_intel_hdmi(&encoder->base); + struct intel_connector *connector = hdmi->attached_connector; + struct i2c_adapter *adapter = + intel_gmbus_get_adapter(dev_priv, hdmi->ddc_bus); + struct drm_connector_state *conn_state; + struct intel_crtc_state *crtc_state; + struct intel_crtc *crtc; + u8 config; + int ret; + + if (!connector || connector->base.status != connector_status_connected) + return 0; + + ret = drm_modeset_lock(&dev_priv->drm.mode_config.connection_mutex, + ctx); + if (ret) + return ret; + + conn_state = connector->base.state; + + crtc = to_intel_crtc(conn_state->crtc); + if (!crtc) + return 0; + + ret = drm_modeset_lock(&crtc->base.mutex, ctx); + if (ret) + return ret; + + crtc_state = to_intel_crtc_state(crtc->base.state); + + WARN_ON(!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)); + + if (!crtc_state->base.active) + return 0; + + if (!crtc_state->hdmi_high_tmds_clock_ratio && + !crtc_state->hdmi_scrambling) + return 0; + + if (conn_state->commit && + !try_wait_for_completion(&conn_state->commit->hw_done)) + return 0; + + ret = drm_scdc_readb(adapter, SCDC_TMDS_CONFIG, &config); + if (ret < 0) { + DRM_ERROR("Failed to read TMDS config: %d\n", ret); + return 0; + } + + if (!!(config & SCDC_TMDS_BIT_CLOCK_RATIO_BY_40) == + crtc_state->hdmi_high_tmds_clock_ratio && + !!(config & SCDC_SCRAMBLING_ENABLE) == + crtc_state->hdmi_scrambling) + return 0; + + /* + * HDMI 2.0 says that one should not send scrambled data + * prior to configuring the sink scrambling, and that + * TMDS clock/data transmission should be suspended when + * changing the TMDS clock rate in the sink. So let's + * just do a full modeset here, even though some sinks + * would be perfectly happy if were to just reconfigure + * the SCDC settings on the fly. + */ + return modeset_pipe(&crtc->base, ctx); +} + +static bool intel_ddi_hotplug(struct intel_encoder *encoder, + struct intel_connector *connector) +{ + struct drm_modeset_acquire_ctx ctx; + bool changed; + int ret; + + changed = intel_encoder_hotplug(encoder, connector); + + drm_modeset_acquire_init(&ctx, 0); + + for (;;) { + if (connector->base.connector_type == DRM_MODE_CONNECTOR_HDMIA) + ret = intel_hdmi_reset_link(encoder, &ctx); + else + ret = intel_dp_retrain_link(encoder, &ctx); + + if (ret == -EDEADLK) { + drm_modeset_backoff(&ctx); + continue; + } + + break; + } + + drm_modeset_drop_locks(&ctx); + drm_modeset_acquire_fini(&ctx); + WARN(ret, "Acquiring modeset locks failed with %i\n", ret); + + return changed; +} + +static struct intel_connector * +intel_ddi_init_hdmi_connector(struct intel_digital_port *intel_dig_port) +{ + struct intel_connector *connector; + enum port port = intel_dig_port->base.port; + + connector = intel_connector_alloc(); + if (!connector) + return NULL; + + intel_dig_port->hdmi.hdmi_reg = DDI_BUF_CTL(port); + intel_hdmi_init_connector(intel_dig_port, connector); + + return connector; +} + +static bool intel_ddi_a_force_4_lanes(struct intel_digital_port *dport) +{ + struct drm_i915_private *dev_priv = to_i915(dport->base.base.dev); + + if (dport->base.port != PORT_A) + return false; + + if (dport->saved_port_bits & DDI_A_4_LANES) + return false; + + /* Broxton/Geminilake: Bspec says that DDI_A_4_LANES is the only + * supported configuration + */ + if (IS_GEN9_LP(dev_priv)) + return true; + + /* Cannonlake: Most of SKUs don't support DDI_E, and the only + * one who does also have a full A/E split called + * DDI_F what makes DDI_E useless. However for this + * case let's trust VBT info. + */ + if (IS_CANNONLAKE(dev_priv) && + !intel_bios_is_port_present(dev_priv, PORT_E)) + return true; + + return false; +} + +static int +intel_ddi_max_lanes(struct intel_digital_port *intel_dport) +{ + struct drm_i915_private *dev_priv = to_i915(intel_dport->base.base.dev); + enum port port = intel_dport->base.port; + int max_lanes = 4; + + if (INTEL_GEN(dev_priv) >= 11) + return max_lanes; + + if (port == PORT_A || port == PORT_E) { + if (I915_READ(DDI_BUF_CTL(PORT_A)) & DDI_A_4_LANES) + max_lanes = port == PORT_A ? 4 : 0; + else + /* Both A and E share 2 lanes */ + max_lanes = 2; + } + + /* + * Some BIOS might fail to set this bit on port A if eDP + * wasn't lit up at boot. Force this bit set when needed + * so we use the proper lane count for our calculations. + */ + if (intel_ddi_a_force_4_lanes(intel_dport)) { + DRM_DEBUG_KMS("Forcing DDI_A_4_LANES for port A\n"); + intel_dport->saved_port_bits |= DDI_A_4_LANES; + max_lanes = 4; + } + + return max_lanes; +} + +void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port) +{ + struct ddi_vbt_port_info *port_info = + &dev_priv->vbt.ddi_port_info[port]; + struct intel_digital_port *intel_dig_port; + struct intel_encoder *intel_encoder; + struct drm_encoder *encoder; + bool init_hdmi, init_dp, init_lspcon = false; + enum pipe pipe; + + init_hdmi = port_info->supports_dvi || port_info->supports_hdmi; + init_dp = port_info->supports_dp; + + if (intel_bios_is_lspcon_present(dev_priv, port)) { + /* + * Lspcon device needs to be driven with DP connector + * with special detection sequence. So make sure DP + * is initialized before lspcon. + */ + init_dp = true; + init_lspcon = true; + init_hdmi = false; + DRM_DEBUG_KMS("VBT says port %c has lspcon\n", port_name(port)); + } + + if (!init_dp && !init_hdmi) { + DRM_DEBUG_KMS("VBT says port %c is not DVI/HDMI/DP compatible, respect it\n", + port_name(port)); + return; + } + + intel_dig_port = kzalloc(sizeof(*intel_dig_port), GFP_KERNEL); + if (!intel_dig_port) + return; + + intel_encoder = &intel_dig_port->base; + encoder = &intel_encoder->base; + + drm_encoder_init(&dev_priv->drm, encoder, &intel_ddi_funcs, + DRM_MODE_ENCODER_TMDS, "DDI %c", port_name(port)); + + intel_encoder->hotplug = intel_ddi_hotplug; + intel_encoder->compute_output_type = intel_ddi_compute_output_type; + intel_encoder->compute_config = intel_ddi_compute_config; + intel_encoder->enable = intel_enable_ddi; + intel_encoder->pre_pll_enable = intel_ddi_pre_pll_enable; + intel_encoder->post_pll_disable = intel_ddi_post_pll_disable; + intel_encoder->pre_enable = intel_ddi_pre_enable; + intel_encoder->disable = intel_disable_ddi; + intel_encoder->post_disable = intel_ddi_post_disable; + intel_encoder->update_pipe = intel_ddi_update_pipe; + intel_encoder->get_hw_state = intel_ddi_get_hw_state; + intel_encoder->get_config = intel_ddi_get_config; + intel_encoder->suspend = intel_ddi_encoder_suspend; + intel_encoder->get_power_domains = intel_ddi_get_power_domains; + intel_encoder->type = INTEL_OUTPUT_DDI; + intel_encoder->power_domain = intel_port_to_power_domain(port); + intel_encoder->port = port; + intel_encoder->cloneable = 0; + for_each_pipe(dev_priv, pipe) + intel_encoder->crtc_mask |= BIT(pipe); + + if (INTEL_GEN(dev_priv) >= 11) + intel_dig_port->saved_port_bits = I915_READ(DDI_BUF_CTL(port)) & + DDI_BUF_PORT_REVERSAL; + else + intel_dig_port->saved_port_bits = I915_READ(DDI_BUF_CTL(port)) & + (DDI_BUF_PORT_REVERSAL | DDI_A_4_LANES); + intel_dig_port->dp.output_reg = INVALID_MMIO_REG; + intel_dig_port->max_lanes = intel_ddi_max_lanes(intel_dig_port); + intel_dig_port->aux_ch = intel_bios_port_aux_ch(dev_priv, port); + + intel_dig_port->tc_legacy_port = intel_port_is_tc(dev_priv, port) && + !port_info->supports_typec_usb && + !port_info->supports_tbt; + + switch (port) { + case PORT_A: + intel_dig_port->ddi_io_power_domain = + POWER_DOMAIN_PORT_DDI_A_IO; + break; + case PORT_B: + intel_dig_port->ddi_io_power_domain = + POWER_DOMAIN_PORT_DDI_B_IO; + break; + case PORT_C: + intel_dig_port->ddi_io_power_domain = + POWER_DOMAIN_PORT_DDI_C_IO; + break; + case PORT_D: + intel_dig_port->ddi_io_power_domain = + POWER_DOMAIN_PORT_DDI_D_IO; + break; + case PORT_E: + intel_dig_port->ddi_io_power_domain = + POWER_DOMAIN_PORT_DDI_E_IO; + break; + case PORT_F: + intel_dig_port->ddi_io_power_domain = + POWER_DOMAIN_PORT_DDI_F_IO; + break; + default: + MISSING_CASE(port); + } + + if (init_dp) { + if (!intel_ddi_init_dp_connector(intel_dig_port)) + goto err; + + intel_dig_port->hpd_pulse = intel_dp_hpd_pulse; + } + + /* In theory we don't need the encoder->type check, but leave it just in + * case we have some really bad VBTs... */ + if (intel_encoder->type != INTEL_OUTPUT_EDP && init_hdmi) { + if (!intel_ddi_init_hdmi_connector(intel_dig_port)) + goto err; + } + + if (init_lspcon) { + if (lspcon_init(intel_dig_port)) + /* TODO: handle hdmi info frame part */ + DRM_DEBUG_KMS("LSPCON init success on port %c\n", + port_name(port)); + else + /* + * LSPCON init faied, but DP init was success, so + * lets try to drive as DP++ port. + */ + DRM_ERROR("LSPCON init failed on port %c\n", + port_name(port)); + } + + intel_infoframe_init(intel_dig_port); + + if (intel_port_is_tc(dev_priv, port)) + intel_digital_port_connected(intel_encoder); + + return; + +err: + drm_encoder_cleanup(encoder); + kfree(intel_dig_port); +} |