summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/i915/intel_display.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpu/drm/i915/intel_display.c')
-rw-r--r--drivers/gpu/drm/i915/intel_display.c409
1 files changed, 291 insertions, 118 deletions
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 8230cf54cc8d..981b1f1c04d8 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -803,6 +803,19 @@ static void assert_pch_pll(struct drm_i915_private *dev_priv,
u32 val;
bool cur_state;
+ if (HAS_PCH_CPT(dev_priv->dev)) {
+ u32 pch_dpll;
+
+ pch_dpll = I915_READ(PCH_DPLL_SEL);
+
+ /* Make sure the selected PLL is enabled to the transcoder */
+ WARN(!((pch_dpll >> (4 * pipe)) & 8),
+ "transcoder %d PLL not enabled\n", pipe);
+
+ /* Convert the transcoder pipe number to a pll pipe number */
+ pipe = (pch_dpll >> (4 * pipe)) & 1;
+ }
+
reg = PCH_DPLL(pipe);
val = I915_READ(reg);
cur_state = !!(val & DPLL_VCO_ENABLE);
@@ -1172,6 +1185,9 @@ static void intel_enable_pch_pll(struct drm_i915_private *dev_priv,
int reg;
u32 val;
+ if (pipe > 1)
+ return;
+
/* PCH only available on ILK+ */
BUG_ON(dev_priv->info->gen < 5);
@@ -1192,6 +1208,9 @@ static void intel_disable_pch_pll(struct drm_i915_private *dev_priv,
int reg;
u32 val;
+ if (pipe > 1)
+ return;
+
/* PCH only available on ILK+ */
BUG_ON(dev_priv->info->gen < 5);
@@ -1257,7 +1276,7 @@ static void intel_disable_transcoder(struct drm_i915_private *dev_priv,
I915_WRITE(reg, val);
/* wait for PCH transcoder off, transcoder state */
if (wait_for((I915_READ(reg) & TRANS_STATE_ENABLE) == 0, 50))
- DRM_ERROR("failed to disable transcoder\n");
+ DRM_ERROR("failed to disable transcoder %d\n", pipe);
}
/**
@@ -2086,6 +2105,7 @@ static int ironlake_update_plane(struct drm_crtc *crtc,
switch (plane) {
case 0:
case 1:
+ case 2:
break;
default:
DRM_ERROR("Can't update plane %d in SAREA\n", plane);
@@ -2185,6 +2205,10 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
case 0:
case 1:
break;
+ case 2:
+ if (IS_IVYBRIDGE(dev))
+ break;
+ /* fall through otherwise */
default:
DRM_ERROR("no plane for crtc\n");
return -EINVAL;
@@ -2601,6 +2625,7 @@ static void ivb_manual_fdi_link_train(struct drm_crtc *crtc)
temp |= FDI_LINK_TRAIN_PATTERN_1_IVB;
temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
+ temp |= FDI_COMPOSITE_SYNC;
I915_WRITE(reg, temp | FDI_TX_ENABLE);
reg = FDI_RX_CTL(pipe);
@@ -2608,6 +2633,7 @@ static void ivb_manual_fdi_link_train(struct drm_crtc *crtc)
temp &= ~FDI_LINK_TRAIN_AUTO;
temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
+ temp |= FDI_COMPOSITE_SYNC;
I915_WRITE(reg, temp | FDI_RX_ENABLE);
POSTING_READ(reg);
@@ -2867,7 +2893,7 @@ static void ironlake_pch_enable(struct drm_crtc *crtc)
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_crtc->pipe;
- u32 reg, temp;
+ u32 reg, temp, transc_sel;
/* For PCH output, training FDI link */
dev_priv->display.fdi_link_train(crtc);
@@ -2875,12 +2901,21 @@ static void ironlake_pch_enable(struct drm_crtc *crtc)
intel_enable_pch_pll(dev_priv, pipe);
if (HAS_PCH_CPT(dev)) {
+ transc_sel = intel_crtc->use_pll_a ? TRANSC_DPLLA_SEL :
+ TRANSC_DPLLB_SEL;
+
/* Be sure PCH DPLL SEL is set */
temp = I915_READ(PCH_DPLL_SEL);
- if (pipe == 0 && (temp & TRANSA_DPLL_ENABLE) == 0)
+ if (pipe == 0) {
+ temp &= ~(TRANSA_DPLLB_SEL);
temp |= (TRANSA_DPLL_ENABLE | TRANSA_DPLLA_SEL);
- else if (pipe == 1 && (temp & TRANSB_DPLL_ENABLE) == 0)
+ } else if (pipe == 1) {
+ temp &= ~(TRANSB_DPLLB_SEL);
temp |= (TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL);
+ } else if (pipe == 2) {
+ temp &= ~(TRANSC_DPLLB_SEL);
+ temp |= (TRANSC_DPLL_ENABLE | transc_sel);
+ }
I915_WRITE(PCH_DPLL_SEL, temp);
}
@@ -2936,6 +2971,24 @@ static void ironlake_pch_enable(struct drm_crtc *crtc)
intel_enable_transcoder(dev_priv, pipe);
}
+void intel_cpt_verify_modeset(struct drm_device *dev, int pipe)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int dslreg = PIPEDSL(pipe), tc2reg = TRANS_CHICKEN2(pipe);
+ u32 temp;
+
+ temp = I915_READ(dslreg);
+ udelay(500);
+ if (wait_for(I915_READ(dslreg) != temp, 5)) {
+ /* Without this, mode sets may fail silently on FDI */
+ I915_WRITE(tc2reg, TRANS_AUTOTRAIN_GEN_STALL_DIS);
+ udelay(250);
+ I915_WRITE(tc2reg, 0);
+ if (wait_for(I915_READ(dslreg) != temp, 5))
+ DRM_ERROR("mode set failed: pipe %d stuck\n", pipe);
+ }
+}
+
static void ironlake_crtc_enable(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
@@ -3046,13 +3099,13 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc)
temp = I915_READ(PCH_DPLL_SEL);
switch (pipe) {
case 0:
- temp &= ~(TRANSA_DPLL_ENABLE | TRANSA_DPLLA_SEL);
+ temp &= ~(TRANSA_DPLL_ENABLE | TRANSA_DPLLB_SEL);
break;
case 1:
temp &= ~(TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL);
break;
case 2:
- /* FIXME: manage transcoder PLLs? */
+ /* C shares PLL A or B */
temp &= ~(TRANSC_DPLL_ENABLE | TRANSC_DPLLB_SEL);
break;
default:
@@ -3062,7 +3115,8 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc)
}
/* disable PCH DPLL */
- intel_disable_pch_pll(dev_priv, pipe);
+ if (!intel_crtc->no_pll)
+ intel_disable_pch_pll(dev_priv, pipe);
/* Switch from PCDclk to Rawclk */
reg = FDI_RX_CTL(pipe);
@@ -3304,8 +3358,15 @@ void intel_encoder_prepare(struct drm_encoder *encoder)
void intel_encoder_commit(struct drm_encoder *encoder)
{
struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
+ struct drm_device *dev = encoder->dev;
+ struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
+ struct intel_crtc *intel_crtc = to_intel_crtc(intel_encoder->base.crtc);
+
/* lvds has its own version of commit see intel_lvds_commit */
encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
+
+ if (HAS_PCH_CPT(dev))
+ intel_cpt_verify_modeset(dev, intel_crtc->pipe);
}
void intel_encoder_destroy(struct drm_encoder *encoder)
@@ -4479,6 +4540,20 @@ static void sandybridge_update_wm(struct drm_device *dev)
enabled |= 2;
}
+ /* IVB has 3 pipes */
+ if (IS_IVYBRIDGE(dev) &&
+ g4x_compute_wm0(dev, 2,
+ &sandybridge_display_wm_info, latency,
+ &sandybridge_cursor_wm_info, latency,
+ &plane_wm, &cursor_wm)) {
+ I915_WRITE(WM0_PIPEC_IVB,
+ (plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm);
+ DRM_DEBUG_KMS("FIFO watermarks For pipe C -"
+ " plane %d, cursor: %d\n",
+ plane_wm, cursor_wm);
+ enabled |= 3;
+ }
+
/*
* Calculate and update the self-refresh watermark only when one
* display plane is used.
@@ -4585,7 +4660,9 @@ static void intel_update_watermarks(struct drm_device *dev)
static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
{
- return dev_priv->lvds_use_ssc && i915_panel_use_ssc
+ if (i915_panel_use_ssc >= 0)
+ return i915_panel_use_ssc != 0;
+ return dev_priv->lvds_use_ssc
&& !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
}
@@ -5108,36 +5185,52 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
return ret;
}
-static void ironlake_update_pch_refclk(struct drm_device *dev)
+/*
+ * Initialize reference clocks when the driver loads
+ */
+void ironlake_init_pch_refclk(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_mode_config *mode_config = &dev->mode_config;
- struct drm_crtc *crtc;
struct intel_encoder *encoder;
- struct intel_encoder *has_edp_encoder = NULL;
u32 temp;
bool has_lvds = false;
+ bool has_cpu_edp = false;
+ bool has_pch_edp = false;
+ bool has_panel = false;
+ bool has_ck505 = false;
+ bool can_ssc = false;
/* We need to take the global config into account */
- list_for_each_entry(crtc, &mode_config->crtc_list, head) {
- if (!crtc->enabled)
- continue;
-
- list_for_each_entry(encoder, &mode_config->encoder_list,
- base.head) {
- if (encoder->base.crtc != crtc)
- continue;
-
- switch (encoder->type) {
- case INTEL_OUTPUT_LVDS:
- has_lvds = true;
- case INTEL_OUTPUT_EDP:
- has_edp_encoder = encoder;
- break;
- }
+ list_for_each_entry(encoder, &mode_config->encoder_list,
+ base.head) {
+ switch (encoder->type) {
+ case INTEL_OUTPUT_LVDS:
+ has_panel = true;
+ has_lvds = true;
+ break;
+ case INTEL_OUTPUT_EDP:
+ has_panel = true;
+ if (intel_encoder_is_pch_edp(&encoder->base))
+ has_pch_edp = true;
+ else
+ has_cpu_edp = true;
+ break;
}
}
+ if (HAS_PCH_IBX(dev)) {
+ has_ck505 = dev_priv->display_clock_mode;
+ can_ssc = has_ck505;
+ } else {
+ has_ck505 = false;
+ can_ssc = true;
+ }
+
+ DRM_DEBUG_KMS("has_panel %d has_lvds %d has_pch_edp %d has_cpu_edp %d has_ck505 %d\n",
+ has_panel, has_lvds, has_pch_edp, has_cpu_edp,
+ has_ck505);
+
/* Ironlake: try to setup display ref clock before DPLL
* enabling. This is only under driver's control after
* PCH B stepping, previous chipset stepping should be
@@ -5146,41 +5239,100 @@ static void ironlake_update_pch_refclk(struct drm_device *dev)
temp = I915_READ(PCH_DREF_CONTROL);
/* Always enable nonspread source */
temp &= ~DREF_NONSPREAD_SOURCE_MASK;
- temp |= DREF_NONSPREAD_SOURCE_ENABLE;
- temp &= ~DREF_SSC_SOURCE_MASK;
- temp |= DREF_SSC_SOURCE_ENABLE;
- I915_WRITE(PCH_DREF_CONTROL, temp);
- POSTING_READ(PCH_DREF_CONTROL);
- udelay(200);
+ if (has_ck505)
+ temp |= DREF_NONSPREAD_CK505_ENABLE;
+ else
+ temp |= DREF_NONSPREAD_SOURCE_ENABLE;
- if (has_edp_encoder) {
- if (intel_panel_use_ssc(dev_priv)) {
- temp |= DREF_SSC1_ENABLE;
- I915_WRITE(PCH_DREF_CONTROL, temp);
+ if (has_panel) {
+ temp &= ~DREF_SSC_SOURCE_MASK;
+ temp |= DREF_SSC_SOURCE_ENABLE;
- POSTING_READ(PCH_DREF_CONTROL);
- udelay(200);
+ /* SSC must be turned on before enabling the CPU output */
+ if (intel_panel_use_ssc(dev_priv) && can_ssc) {
+ DRM_DEBUG_KMS("Using SSC on panel\n");
+ temp |= DREF_SSC1_ENABLE;
}
+
+ /* Get SSC going before enabling the outputs */
+ I915_WRITE(PCH_DREF_CONTROL, temp);
+ POSTING_READ(PCH_DREF_CONTROL);
+ udelay(200);
+
temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
/* Enable CPU source on CPU attached eDP */
- if (!intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
- if (intel_panel_use_ssc(dev_priv))
+ if (has_cpu_edp) {
+ if (intel_panel_use_ssc(dev_priv) && can_ssc) {
+ DRM_DEBUG_KMS("Using SSC on eDP\n");
temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
+ }
else
temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
- } else {
- /* Enable SSC on PCH eDP if needed */
- if (intel_panel_use_ssc(dev_priv)) {
- DRM_ERROR("enabling SSC on PCH\n");
- temp |= DREF_SUPERSPREAD_SOURCE_ENABLE;
- }
- }
+ } else
+ temp |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
+
I915_WRITE(PCH_DREF_CONTROL, temp);
POSTING_READ(PCH_DREF_CONTROL);
udelay(200);
+ } else {
+ DRM_DEBUG_KMS("Disabling SSC entirely\n");
+
+ temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
+
+ /* Turn off CPU output */
+ temp |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
+
+ I915_WRITE(PCH_DREF_CONTROL, temp);
+ POSTING_READ(PCH_DREF_CONTROL);
+ udelay(200);
+
+ /* Turn off the SSC source */
+ temp &= ~DREF_SSC_SOURCE_MASK;
+ temp |= DREF_SSC_SOURCE_DISABLE;
+
+ /* Turn off SSC1 */
+ temp &= ~ DREF_SSC1_ENABLE;
+
+ I915_WRITE(PCH_DREF_CONTROL, temp);
+ POSTING_READ(PCH_DREF_CONTROL);
+ udelay(200);
+ }
+}
+
+static int ironlake_get_refclk(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_encoder *encoder;
+ struct drm_mode_config *mode_config = &dev->mode_config;
+ struct intel_encoder *edp_encoder = NULL;
+ int num_connectors = 0;
+ bool is_lvds = false;
+
+ list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
+ if (encoder->base.crtc != crtc)
+ continue;
+
+ switch (encoder->type) {
+ case INTEL_OUTPUT_LVDS:
+ is_lvds = true;
+ break;
+ case INTEL_OUTPUT_EDP:
+ edp_encoder = encoder;
+ break;
+ }
+ num_connectors++;
}
+
+ if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
+ DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n",
+ dev_priv->lvds_ssc_freq);
+ return dev_priv->lvds_ssc_freq * 1000;
+ }
+
+ return 120000;
}
static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
@@ -5242,16 +5394,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
num_connectors++;
}
- if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
- refclk = dev_priv->lvds_ssc_freq * 1000;
- DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n",
- refclk / 1000);
- } else {
- refclk = 96000;
- if (!has_edp_encoder ||
- intel_encoder_is_pch_edp(&has_edp_encoder->base))
- refclk = 120000; /* 120Mhz refclk */
- }
+ refclk = ironlake_get_refclk(crtc);
/*
* Returns a set of divisors for the desired target clock with the given
@@ -5378,8 +5521,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
ironlake_compute_m_n(intel_crtc->bpp, lane, target_clock, link_bw,
&m_n);
- ironlake_update_pch_refclk(dev);
-
fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
if (has_reduced_clock)
fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 |
@@ -5451,39 +5592,32 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
/* Set up the display plane register */
dspcntr = DISPPLANE_GAMMA_ENABLE;
- DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
+ DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe);
drm_mode_debug_printmodeline(mode);
/* PCH eDP needs FDI, but CPU eDP does not */
- if (!has_edp_encoder || intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
- I915_WRITE(PCH_FP0(pipe), fp);
- I915_WRITE(PCH_DPLL(pipe), dpll & ~DPLL_VCO_ENABLE);
-
- POSTING_READ(PCH_DPLL(pipe));
- udelay(150);
- }
+ if (!intel_crtc->no_pll) {
+ if (!has_edp_encoder ||
+ intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+ I915_WRITE(PCH_FP0(pipe), fp);
+ I915_WRITE(PCH_DPLL(pipe), dpll & ~DPLL_VCO_ENABLE);
- /* enable transcoder DPLL */
- if (HAS_PCH_CPT(dev)) {
- temp = I915_READ(PCH_DPLL_SEL);
- switch (pipe) {
- case 0:
- temp |= TRANSA_DPLL_ENABLE | TRANSA_DPLLA_SEL;
- break;
- case 1:
- temp |= TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL;
- break;
- case 2:
- /* FIXME: manage transcoder PLLs? */
- temp |= TRANSC_DPLL_ENABLE | TRANSC_DPLLB_SEL;
- break;
- default:
- BUG();
+ POSTING_READ(PCH_DPLL(pipe));
+ udelay(150);
+ }
+ } else {
+ if (dpll == (I915_READ(PCH_DPLL(0)) & 0x7fffffff) &&
+ fp == I915_READ(PCH_FP0(0))) {
+ intel_crtc->use_pll_a = true;
+ DRM_DEBUG_KMS("using pipe a dpll\n");
+ } else if (dpll == (I915_READ(PCH_DPLL(1)) & 0x7fffffff) &&
+ fp == I915_READ(PCH_FP0(1))) {
+ intel_crtc->use_pll_a = false;
+ DRM_DEBUG_KMS("using pipe b dpll\n");
+ } else {
+ DRM_DEBUG_KMS("no matching PLL configuration for pipe 2\n");
+ return -EINVAL;
}
- I915_WRITE(PCH_DPLL_SEL, temp);
-
- POSTING_READ(PCH_DPLL_SEL);
- udelay(150);
}
/* The LVDS pin pair needs to be on before the DPLLs are enabled.
@@ -5493,17 +5627,13 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
if (is_lvds) {
temp = I915_READ(PCH_LVDS);
temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
- if (pipe == 1) {
- if (HAS_PCH_CPT(dev))
- temp |= PORT_TRANS_B_SEL_CPT;
- else
- temp |= LVDS_PIPEB_SELECT;
- } else {
- if (HAS_PCH_CPT(dev))
- temp &= ~PORT_TRANS_SEL_MASK;
- else
- temp &= ~LVDS_PIPEB_SELECT;
- }
+ if (HAS_PCH_CPT(dev))
+ temp |= PORT_TRANS_SEL_CPT(pipe);
+ else if (pipe == 1)
+ temp |= LVDS_PIPEB_SELECT;
+ else
+ temp &= ~LVDS_PIPEB_SELECT;
+
/* set the corresponsding LVDS_BORDER bit */
temp |= dev_priv->lvds_border_bits;
/* Set the B0-B3 data pairs corresponding to whether we're going to
@@ -5553,8 +5683,9 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
I915_WRITE(TRANSDPLINK_N1(pipe), 0);
}
- if (!has_edp_encoder ||
- intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+ if (!intel_crtc->no_pll &&
+ (!has_edp_encoder ||
+ intel_encoder_is_pch_edp(&has_edp_encoder->base))) {
I915_WRITE(PCH_DPLL(pipe), dpll);
/* Wait for the clocks to stabilize. */
@@ -5570,18 +5701,20 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
}
intel_crtc->lowfreq_avail = false;
- if (is_lvds && has_reduced_clock && i915_powersave) {
- I915_WRITE(PCH_FP1(pipe), fp2);
- intel_crtc->lowfreq_avail = true;
- if (HAS_PIPE_CXSR(dev)) {
- DRM_DEBUG_KMS("enabling CxSR downclocking\n");
- pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
- }
- } else {
- I915_WRITE(PCH_FP1(pipe), fp);
- if (HAS_PIPE_CXSR(dev)) {
- DRM_DEBUG_KMS("disabling CxSR downclocking\n");
- pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK;
+ if (!intel_crtc->no_pll) {
+ if (is_lvds && has_reduced_clock && i915_powersave) {
+ I915_WRITE(PCH_FP1(pipe), fp2);
+ intel_crtc->lowfreq_avail = true;
+ if (HAS_PIPE_CXSR(dev)) {
+ DRM_DEBUG_KMS("enabling CxSR downclocking\n");
+ pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
+ }
+ } else {
+ I915_WRITE(PCH_FP1(pipe), fp);
+ if (HAS_PIPE_CXSR(dev)) {
+ DRM_DEBUG_KMS("disabling CxSR downclocking\n");
+ pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK;
+ }
}
}
@@ -5884,6 +6017,31 @@ static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base)
I915_WRITE(CURBASE(pipe), base);
}
+static void ivb_update_cursor(struct drm_crtc *crtc, u32 base)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int pipe = intel_crtc->pipe;
+ bool visible = base != 0;
+
+ if (intel_crtc->cursor_visible != visible) {
+ uint32_t cntl = I915_READ(CURCNTR_IVB(pipe));
+ if (base) {
+ cntl &= ~CURSOR_MODE;
+ cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
+ } else {
+ cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
+ cntl |= CURSOR_MODE_DISABLE;
+ }
+ I915_WRITE(CURCNTR_IVB(pipe), cntl);
+
+ intel_crtc->cursor_visible = visible;
+ }
+ /* and commit changes on next vblank */
+ I915_WRITE(CURBASE_IVB(pipe), base);
+}
+
/* If no-part of the cursor is visible on the framebuffer, then the GPU may hang... */
static void intel_crtc_update_cursor(struct drm_crtc *crtc,
bool on)
@@ -5931,11 +6089,16 @@ static void intel_crtc_update_cursor(struct drm_crtc *crtc,
if (!visible && !intel_crtc->cursor_visible)
return;
- I915_WRITE(CURPOS(pipe), pos);
- if (IS_845G(dev) || IS_I865G(dev))
- i845_update_cursor(crtc, base);
- else
- i9xx_update_cursor(crtc, base);
+ if (IS_IVYBRIDGE(dev)) {
+ I915_WRITE(CURPOS_IVB(pipe), pos);
+ ivb_update_cursor(crtc, base);
+ } else {
+ I915_WRITE(CURPOS(pipe), pos);
+ if (IS_845G(dev) || IS_I865G(dev))
+ i845_update_cursor(crtc, base);
+ else
+ i9xx_update_cursor(crtc, base);
+ }
if (visible)
intel_mark_busy(dev, to_intel_framebuffer(crtc->fb)->obj);
@@ -7197,6 +7360,8 @@ static void intel_crtc_init(struct drm_device *dev, int pipe)
intel_crtc->bpp = 24; /* default for pre-Ironlake */
if (HAS_PCH_SPLIT(dev)) {
+ if (pipe == 2 && IS_IVYBRIDGE(dev))
+ intel_crtc->no_pll = true;
intel_helper_funcs.prepare = ironlake_crtc_prepare;
intel_helper_funcs.commit = ironlake_crtc_commit;
} else {
@@ -7376,6 +7541,9 @@ static void intel_setup_outputs(struct drm_device *dev)
/* disable all the possible outputs/crtcs before entering KMS mode */
drm_helper_disable_unused_functions(dev);
+
+ if (HAS_PCH_SPLIT(dev))
+ ironlake_init_pch_refclk(dev);
}
static void intel_user_framebuffer_destroy(struct drm_framebuffer *fb)
@@ -7620,6 +7788,10 @@ void gen6_disable_rps(struct drm_device *dev)
I915_WRITE(GEN6_RPNSWREQ, 1 << 31);
I915_WRITE(GEN6_PMINTRMSK, 0xffffffff);
I915_WRITE(GEN6_PMIER, 0);
+ /* Complete PM interrupt masking here doesn't race with the rps work
+ * item again unmasking PM interrupts because that is using a different
+ * register (PMIMR) to mask PM interrupts. The only risk is in leaving
+ * stale bits in PMIIR and PMIMR which gen6_enable_rps will clean up. */
spin_lock_irq(&dev_priv->rps_lock);
dev_priv->pm_iir = 0;
@@ -8617,6 +8789,7 @@ void intel_modeset_cleanup(struct drm_device *dev)
* enqueue unpin/hotplug work. */
drm_irq_uninstall(dev);
cancel_work_sync(&dev_priv->hotplug_work);
+ cancel_work_sync(&dev_priv->rps_work);
/* flush any delayed tasks or pending work */
flush_scheduled_work();
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-17 15:24:33 +0000