diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_display.c')
| -rw-r--r-- | drivers/gpu/drm/i915/intel_display.c | 1914 |
1 files changed, 1174 insertions, 740 deletions
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index dae976f51d83..efd3cf50cb0f 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -41,6 +41,9 @@ #include <drm/drm_crtc_helper.h> #include <linux/dma_remapping.h> +#define DIV_ROUND_CLOSEST_ULL(ll, d) \ + ({ unsigned long long _tmp = (ll)+(d)/2; do_div(_tmp, d); _tmp; }) + static void intel_increase_pllclock(struct drm_crtc *crtc); static void intel_crtc_update_cursor(struct drm_crtc *crtc, bool on); @@ -55,6 +58,15 @@ static int intel_framebuffer_init(struct drm_device *dev, struct intel_framebuffer *ifb, struct drm_mode_fb_cmd2 *mode_cmd, struct drm_i915_gem_object *obj); +static void intel_dp_set_m_n(struct intel_crtc *crtc); +static void i9xx_set_pipeconf(struct intel_crtc *intel_crtc); +static void intel_set_pipe_timings(struct intel_crtc *intel_crtc); +static void intel_cpu_transcoder_set_m_n(struct intel_crtc *crtc, + struct intel_link_m_n *m_n); +static void ironlake_set_pipeconf(struct drm_crtc *crtc); +static void haswell_set_pipeconf(struct drm_crtc *crtc); +static void intel_set_pipe_csc(struct drm_crtc *crtc); +static void vlv_prepare_pll(struct intel_crtc *crtc); typedef struct { int min, max; @@ -328,6 +340,22 @@ static const intel_limit_t intel_limits_vlv = { .p2 = { .p2_slow = 2, .p2_fast = 20 }, /* slow=min, fast=max */ }; +static const intel_limit_t intel_limits_chv = { + /* + * These are the data rate limits (measured in fast clocks) + * since those are the strictest limits we have. The fast + * clock and actual rate limits are more relaxed, so checking + * them would make no difference. + */ + .dot = { .min = 25000 * 5, .max = 540000 * 5}, + .vco = { .min = 4860000, .max = 6700000 }, + .n = { .min = 1, .max = 1 }, + .m1 = { .min = 2, .max = 2 }, + .m2 = { .min = 24 << 22, .max = 175 << 22 }, + .p1 = { .min = 2, .max = 4 }, + .p2 = { .p2_slow = 1, .p2_fast = 14 }, +}; + static void vlv_clock(int refclk, intel_clock_t *clock) { clock->m = clock->m1 * clock->m2; @@ -412,6 +440,8 @@ static const intel_limit_t *intel_limit(struct drm_crtc *crtc, int refclk) limit = &intel_limits_pineview_lvds; else limit = &intel_limits_pineview_sdvo; + } else if (IS_CHERRYVIEW(dev)) { + limit = &intel_limits_chv; } else if (IS_VALLEYVIEW(dev)) { limit = &intel_limits_vlv; } else if (!IS_GEN2(dev)) { @@ -456,6 +486,17 @@ static void i9xx_clock(int refclk, intel_clock_t *clock) clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p); } +static void chv_clock(int refclk, intel_clock_t *clock) +{ + clock->m = clock->m1 * clock->m2; + clock->p = clock->p1 * clock->p2; + if (WARN_ON(clock->n == 0 || clock->p == 0)) + return; + clock->vco = DIV_ROUND_CLOSEST_ULL((uint64_t)refclk * clock->m, + clock->n << 22); + clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p); +} + #define INTELPllInvalid(s) do { /* DRM_DEBUG(s); */ return false; } while (0) /** * Returns whether the given set of divisors are valid for a given refclk with @@ -731,6 +772,58 @@ vlv_find_best_dpll(const intel_limit_t *limit, struct drm_crtc *crtc, return found; } +static bool +chv_find_best_dpll(const intel_limit_t *limit, struct drm_crtc *crtc, + int target, int refclk, intel_clock_t *match_clock, + intel_clock_t *best_clock) +{ + struct drm_device *dev = crtc->dev; + intel_clock_t clock; + uint64_t m2; + int found = false; + + memset(best_clock, 0, sizeof(*best_clock)); + + /* + * Based on hardware doc, the n always set to 1, and m1 always + * set to 2. If requires to support 200Mhz refclk, we need to + * revisit this because n may not 1 anymore. + */ + clock.n = 1, clock.m1 = 2; + target *= 5; /* fast clock */ + + for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) { + for (clock.p2 = limit->p2.p2_fast; + clock.p2 >= limit->p2.p2_slow; + clock.p2 -= clock.p2 > 10 ? 2 : 1) { + + clock.p = clock.p1 * clock.p2; + + m2 = DIV_ROUND_CLOSEST_ULL(((uint64_t)target * clock.p * + clock.n) << 22, refclk * clock.m1); + + if (m2 > INT_MAX/clock.m1) + continue; + + clock.m2 = m2; + + chv_clock(refclk, &clock); + + if (!intel_PLL_is_valid(dev, limit, &clock)) + continue; + + /* based on hardware requirement, prefer bigger p + */ + if (clock.p > best_clock->p) { + *best_clock = clock; + found = true; + } + } + } + + return found; +} + bool intel_crtc_active(struct drm_crtc *crtc) { struct intel_crtc *intel_crtc = to_intel_crtc(crtc); @@ -765,7 +858,7 @@ static void g4x_wait_for_vblank(struct drm_device *dev, int pipe) frame = I915_READ(frame_reg); if (wait_for(I915_READ_NOTRACE(frame_reg) != frame, 50)) - DRM_DEBUG_KMS("vblank wait timed out\n"); + WARN(1, "vblank wait timed out\n"); } /** @@ -878,7 +971,7 @@ bool ibx_digital_port_connected(struct drm_i915_private *dev_priv, u32 bit; if (HAS_PCH_IBX(dev_priv->dev)) { - switch(port->port) { + switch (port->port) { case PORT_B: bit = SDE_PORTB_HOTPLUG; break; @@ -892,7 +985,7 @@ bool ibx_digital_port_connected(struct drm_i915_private *dev_priv, return true; } } else { - switch(port->port) { + switch (port->port) { case PORT_B: bit = SDE_PORTB_HOTPLUG_CPT; break; @@ -1097,10 +1190,8 @@ static void assert_cursor(struct drm_i915_private *dev_priv, if (IS_845G(dev) || IS_I865G(dev)) cur_state = I915_READ(_CURACNTR) & CURSOR_ENABLE; - else if (INTEL_INFO(dev)->gen <= 6 || IS_VALLEYVIEW(dev)) - cur_state = I915_READ(CURCNTR(pipe)) & CURSOR_MODE; else - cur_state = I915_READ(CURCNTR_IVB(pipe)) & CURSOR_MODE; + cur_state = I915_READ(CURCNTR(pipe)) & CURSOR_MODE; WARN(cur_state != state, "cursor on pipe %c assertion failure (expected %s, current %s)\n", @@ -1253,6 +1344,9 @@ static bool dp_pipe_enabled(struct drm_i915_private *dev_priv, u32 trans_dp_ctl = I915_READ(trans_dp_ctl_reg); if ((trans_dp_ctl & TRANS_DP_PORT_SEL_MASK) != port_sel) return false; + } else if (IS_CHERRYVIEW(dev_priv->dev)) { + if ((val & DP_PIPE_MASK_CHV) != DP_PIPE_SELECT_CHV(pipe)) + return false; } else { if ((val & DP_PIPE_MASK) != (pipe << 30)) return false; @@ -1269,6 +1363,9 @@ static bool hdmi_pipe_enabled(struct drm_i915_private *dev_priv, if (HAS_PCH_CPT(dev_priv->dev)) { if ((val & SDVO_PIPE_SEL_MASK_CPT) != SDVO_PIPE_SEL_CPT(pipe)) return false; + } else if (IS_CHERRYVIEW(dev_priv->dev)) { + if ((val & SDVO_PIPE_SEL_MASK_CHV) != SDVO_PIPE_SEL_CHV(pipe)) + return false; } else { if ((val & SDVO_PIPE_SEL_MASK) != SDVO_PIPE_SEL(pipe)) return false; @@ -1367,7 +1464,17 @@ static void intel_init_dpio(struct drm_device *dev) if (!IS_VALLEYVIEW(dev)) return; - DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO; + /* + * IOSF_PORT_DPIO is used for VLV x2 PHY (DP/HDMI B and C), + * CHV x1 PHY (DP/HDMI D) + * IOSF_PORT_DPIO_2 is used for CHV x2 PHY (DP/HDMI B and C) + */ + if (IS_CHERRYVIEW(dev)) { + DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO_2; + DPIO_PHY_IOSF_PORT(DPIO_PHY1) = IOSF_PORT_DPIO; + } else { + DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO; + } } static void intel_reset_dpio(struct drm_device *dev) @@ -1377,25 +1484,48 @@ static void intel_reset_dpio(struct drm_device *dev) if (!IS_VALLEYVIEW(dev)) return; - /* - * Enable the CRI clock source so we can get at the display and the - * reference clock for VGA hotplug / manual detection. - */ - I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) | - DPLL_REFA_CLK_ENABLE_VLV | - DPLL_INTEGRATED_CRI_CLK_VLV); + if (IS_CHERRYVIEW(dev)) { + enum dpio_phy phy; + u32 val; - /* - * From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx - - * 6. De-assert cmn_reset/side_reset. Same as VLV X0. - * a. GUnit 0x2110 bit[0] set to 1 (def 0) - * b. The other bits such as sfr settings / modesel may all be set - * to 0. - * - * This should only be done on init and resume from S3 with both - * PLLs disabled, or we risk losing DPIO and PLL synchronization. - */ - I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) | DPIO_CMNRST); + for (phy = DPIO_PHY0; phy < I915_NUM_PHYS_VLV; phy++) { + /* Poll for phypwrgood signal */ + if (wait_for(I915_READ(DISPLAY_PHY_STATUS) & + PHY_POWERGOOD(phy), 1)) + DRM_ERROR("Display PHY %d is not power up\n", phy); + + /* + * Deassert common lane reset for PHY. + * + * This should only be done on init and resume from S3 + * with both PLLs disabled, or we risk losing DPIO and + * PLL synchronization. + */ + val = I915_READ(DISPLAY_PHY_CONTROL); + I915_WRITE(DISPLAY_PHY_CONTROL, + PHY_COM_LANE_RESET_DEASSERT(phy, val)); + } + + } else { + /* + * If DPIO has already been reset, e.g. by BIOS, just skip all + * this. + */ + if (I915_READ(DPIO_CTL) & DPIO_CMNRST) + return; + + /* + * From VLV2A0_DP_eDP_HDMI_DPIO_driver_vbios_notes_11.docx: + * Need to assert and de-assert PHY SB reset by gating the + * common lane power, then un-gating it. + * Simply ungating isn't enough to reset the PHY enough to get + * ports and lanes running. + */ + __vlv_set_power_well(dev_priv, PUNIT_POWER_WELL_DPIO_CMN_BC, + false); + __vlv_set_power_well(dev_priv, PUNIT_POWER_WELL_DPIO_CMN_BC, + true); + } } static void vlv_enable_pll(struct intel_crtc *crtc) @@ -1436,6 +1566,44 @@ static void vlv_enable_pll(struct intel_crtc *crtc) udelay(150); /* wait for warmup */ } +static void chv_enable_pll(struct intel_crtc *crtc) +{ + struct drm_device *dev = crtc->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + int pipe = crtc->pipe; + enum dpio_channel port = vlv_pipe_to_channel(pipe); + u32 tmp; + + assert_pipe_disabled(dev_priv, crtc->pipe); + + BUG_ON(!IS_CHERRYVIEW(dev_priv->dev)); + + mutex_lock(&dev_priv->dpio_lock); + + /* Enable back the 10bit clock to display controller */ + tmp = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port)); + tmp |= DPIO_DCLKP_EN; + vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), tmp); + + /* + * Need to wait > 100ns between dclkp clock enable bit and PLL enable. + */ + udelay(1); + + /* Enable PLL */ + I915_WRITE(DPLL(pipe), crtc->config.dpll_hw_state.dpll); + + /* Check PLL is locked */ + if (wait_for(((I915_READ(DPLL(pipe)) & DPLL_LOCK_VLV) == DPLL_LOCK_VLV), 1)) + DRM_ERROR("PLL %d failed to lock\n", pipe); + + /* not sure when this should be written */ + I915_WRITE(DPLL_MD(pipe), crtc->config.dpll_hw_state.dpll_md); + POSTING_READ(DPLL_MD(pipe)); + + mutex_unlock(&dev_priv->dpio_lock); +} + static void i9xx_enable_pll(struct intel_crtc *crtc) { struct drm_device *dev = crtc->base.dev; @@ -1519,45 +1687,92 @@ static void vlv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe) val = DPLL_INTEGRATED_CRI_CLK_VLV | DPLL_REFA_CLK_ENABLE_VLV; I915_WRITE(DPLL(pipe), val); POSTING_READ(DPLL(pipe)); + +} + +static void chv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe) +{ + enum dpio_channel port = vlv_pipe_to_channel(pipe); + u32 val; + + /* Make sure the pipe isn't still relying on us */ + assert_pipe_disabled(dev_priv, pipe); + + /* Set PLL en = 0 */ + val = DPLL_SSC_REF_CLOCK_CHV; + if (pipe != PIPE_A) + val |= DPLL_INTEGRATED_CRI_CLK_VLV; + I915_WRITE(DPLL(pipe), val); + POSTING_READ(DPLL(pipe)); + + mutex_lock(&dev_priv->dpio_lock); + + /* Disable 10bit clock to display controller */ + val = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port)); + val &= ~DPIO_DCLKP_EN; + vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), val); + + mutex_unlock(&dev_priv->dpio_lock); } void vlv_wait_port_ready(struct drm_i915_private *dev_priv, struct intel_digital_port *dport) { u32 port_mask; + int dpll_reg; switch (dport->port) { case PORT_B: port_mask = DPLL_PORTB_READY_MASK; + dpll_reg = DPLL(0); break; case PORT_C: port_mask = DPLL_PORTC_READY_MASK; + dpll_reg = DPLL(0); + break; + case PORT_D: + port_mask = DPLL_PORTD_READY_MASK; + dpll_reg = DPIO_PHY_STATUS; break; default: BUG(); } - if (wait_for((I915_READ(DPLL(0)) & port_mask) == 0, 1000)) + if (wait_for((I915_READ(dpll_reg) & port_mask) == 0, 1000)) WARN(1, "timed out waiting for port %c ready: 0x%08x\n", - port_name(dport->port), I915_READ(DPLL(0))); + port_name(dport->port), I915_READ(dpll_reg)); +} + +static void intel_prepare_shared_dpll(struct intel_crtc *crtc) +{ + struct drm_device *dev = crtc->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc); + + WARN_ON(!pll->refcount); + if (pll->active == 0) { + DRM_DEBUG_DRIVER("setting up %s\n", pll->name); + WARN_ON(pll->on); + assert_shared_dpll_disabled(dev_priv, pll); + + pll->mode_set(dev_priv, pll); + } } /** - * ironlake_enable_shared_dpll - enable PCH PLL + * intel_enable_shared_dpll - enable PCH PLL * @dev_priv: i915 private structure * @pipe: pipe PLL to enable * * The PCH PLL needs to be enabled before the PCH transcoder, since it * drives the transcoder clock. */ -static void ironlake_enable_shared_dpll(struct intel_crtc *crtc) +static void intel_enable_shared_dpll(struct intel_crtc *crtc) { struct drm_device *dev = crtc->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc); - /* PCH PLLs only available on ILK, SNB and IVB */ - BUG_ON(INTEL_INFO(dev)->gen < 5); if (WARN_ON(pll == NULL)) return; @@ -1804,16 +2019,6 @@ static void intel_enable_pipe(struct intel_crtc *crtc) I915_WRITE(reg, val | PIPECONF_ENABLE); POSTING_READ(reg); - - /* - * There's no guarantee the pipe will really start running now. It - * depends on the Gen, the output type and the relative order between - * pipe and plane enabling. Avoid waiting on HSW+ since it's not - * necessary. - * TODO: audit the previous gens. - */ - if (INTEL_INFO(dev)->gen <= 7 && !IS_HASWELL(dev)) - intel_wait_for_vblank(dev_priv->dev, pipe); } /** @@ -1890,18 +2095,17 @@ static void intel_enable_primary_hw_plane(struct drm_i915_private *dev_priv, /* If the pipe isn't enabled, we can't pump pixels and may hang */ assert_pipe_enabled(dev_priv, pipe); - WARN(intel_crtc->primary_enabled, "Primary plane already enabled\n"); + if (intel_crtc->primary_enabled) + return; intel_crtc->primary_enabled = true; reg = DSPCNTR(plane); val = I915_READ(reg); - if (val & DISPLAY_PLANE_ENABLE) - return; + WARN_ON(val & DISPLAY_PLANE_ENABLE); I915_WRITE(reg, val | DISPLAY_PLANE_ENABLE); intel_flush_primary_plane(dev_priv, plane); - intel_wait_for_vblank(dev_priv->dev, pipe); } /** @@ -1920,18 +2124,17 @@ static void intel_disable_primary_hw_plane(struct drm_i915_private *dev_priv, int reg; u32 val; - WARN(!intel_crtc->primary_enabled, "Primary plane already disabled\n"); + if (!intel_crtc->primary_enabled) + return; intel_crtc->primary_enabled = false; reg = DSPCNTR(plane); val = I915_READ(reg); - if ((val & DISPLAY_PLANE_ENABLE) == 0) - return; + WARN_ON((val & DISPLAY_PLANE_ENABLE) == 0); I915_WRITE(reg, val & ~DISPLAY_PLANE_ENABLE); intel_flush_primary_plane(dev_priv, plane); - intel_wait_for_vblank(dev_priv->dev, pipe); } static bool need_vtd_wa(struct drm_device *dev) @@ -1954,7 +2157,7 @@ static int intel_align_height(struct drm_device *dev, int height, bool tiled) int intel_pin_and_fence_fb_obj(struct drm_device *dev, struct drm_i915_gem_object *obj, - struct intel_ring_buffer *pipelined) + struct intel_engine_cs *pipelined) { struct drm_i915_private *dev_priv = dev->dev_private; u32 alignment; @@ -2134,7 +2337,7 @@ static void intel_find_plane_obj(struct intel_crtc *intel_crtc, * Failed to alloc the obj, check to see if we should share * an fb with another CRTC instead */ - list_for_each_entry(c, &dev->mode_config.crtc_list, head) { + for_each_crtc(dev, c) { i = to_intel_crtc(c); if (c == &intel_crtc->base) @@ -2152,9 +2355,9 @@ static void intel_find_plane_obj(struct intel_crtc *intel_crtc, } } -static int i9xx_update_primary_plane(struct drm_crtc *crtc, - struct drm_framebuffer *fb, - int x, int y) +static void i9xx_update_primary_plane(struct drm_crtc *crtc, + struct drm_framebuffer *fb, + int x, int y) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; @@ -2166,15 +2369,6 @@ static int i9xx_update_primary_plane(struct drm_crtc *crtc, u32 dspcntr; u32 reg; - switch (plane) { - case 0: - case 1: - break; - default: - DRM_ERROR("Can't update plane %c in SAREA\n", plane_name(plane)); - return -EINVAL; - } - intel_fb = to_intel_framebuffer(fb); obj = intel_fb->obj; @@ -2249,13 +2443,11 @@ static int i9xx_update_primary_plane(struct drm_crtc *crtc, } else I915_WRITE(DSPADDR(plane), i915_gem_obj_ggtt_offset(obj) + linear_offset); POSTING_READ(reg); - - return 0; } -static int ironlake_update_primary_plane(struct drm_crtc *crtc, - struct drm_framebuffer *fb, - int x, int y) +static void ironlake_update_primary_plane(struct drm_crtc *crtc, + struct drm_framebuffer *fb, + int x, int y) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; @@ -2267,16 +2459,6 @@ static int ironlake_update_primary_plane(struct drm_crtc *crtc, u32 dspcntr; u32 reg; - switch (plane) { - case 0: - case 1: - case 2: - break; - default: - DRM_ERROR("Can't update plane %c in SAREA\n", plane_name(plane)); - return -EINVAL; - } - intel_fb = to_intel_framebuffer(fb); obj = intel_fb->obj; @@ -2343,8 +2525,6 @@ static int ironlake_update_primary_plane(struct drm_crtc *crtc, I915_WRITE(DSPLINOFF(plane), linear_offset); } POSTING_READ(reg); - - return 0; } /* Assume fb object is pinned & idle & fenced and just update base pointers */ @@ -2359,7 +2539,9 @@ intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb, dev_priv->display.disable_fbc(dev); intel_increase_pllclock(crtc); - return dev_priv->display.update_primary_plane(crtc, fb, x, y); + dev_priv->display.update_primary_plane(crtc, fb, x, y); + + return 0; } void intel_display_handle_reset(struct drm_device *dev) @@ -2381,7 +2563,7 @@ void intel_display_handle_reset(struct drm_device *dev) * pending_flip_queue really got woken up. */ - list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + for_each_crtc(dev, crtc) { struct intel_crtc *intel_crtc = to_intel_crtc(crtc); enum plane plane = intel_crtc->plane; @@ -2389,10 +2571,10 @@ void intel_display_handle_reset(struct drm_device *dev) intel_finish_page_flip_plane(dev, plane); } - list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + for_each_crtc(dev, crtc) { struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - mutex_lock(&crtc->mutex); + drm_modeset_lock(&crtc->mutex, NULL); /* * FIXME: Once we have proper support for primary planes (and * disabling them without disabling the entire crtc) allow again @@ -2403,7 +2585,7 @@ void intel_display_handle_reset(struct drm_device *dev) crtc->primary->fb, crtc->x, crtc->y); - mutex_unlock(&crtc->mutex); + drm_modeset_unlock(&crtc->mutex); } } @@ -2518,14 +2700,7 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, intel_crtc->config.pipe_src_h = adjusted_mode->crtc_vdisplay; } - ret = dev_priv->display.update_primary_plane(crtc, fb, x, y); - if (ret) { - mutex_lock(&dev->struct_mutex); - intel_unpin_fb_obj(to_intel_framebuffer(fb)->obj); - mutex_unlock(&dev->struct_mutex); - DRM_ERROR("failed to update base address\n"); - return ret; - } + dev_priv->display.update_primary_plane(crtc, fb, x, y); old_fb = crtc->primary->fb; crtc->primary->fb = fb; @@ -2628,12 +2803,10 @@ static void ironlake_fdi_link_train(struct drm_crtc *crtc) struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; - int plane = intel_crtc->plane; u32 reg, temp, tries; - /* FDI needs bits from pipe & plane first */ + /* FDI needs bits from pipe first */ assert_pipe_enabled(dev_priv, pipe); - assert_plane_enabled(dev_priv, plane); /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit for train result */ @@ -3064,9 +3237,8 @@ static void ironlake_fdi_disable(struct drm_crtc *crtc) udelay(100); /* Ironlake workaround, disable clock pointer after downing FDI */ - if (HAS_PCH_IBX(dev)) { + if (HAS_PCH_IBX(dev)) I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR); - } /* still set train pattern 1 */ reg = FDI_TX_CTL(pipe); @@ -3104,7 +3276,7 @@ bool intel_has_pending_fb_unpin(struct drm_device *dev) * cannot claim and pin a new fb without at least acquring the * struct_mutex and so serialising with us. */ - list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) { + for_each_intel_crtc(dev, crtc) { if (atomic_read(&crtc->unpin_work_count) == 0) continue; @@ -3117,7 +3289,7 @@ bool intel_has_pending_fb_unpin(struct drm_device *dev) return false; } -static void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc) +void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; @@ -3127,8 +3299,9 @@ static void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc) WARN_ON(waitqueue_active(&dev_priv->pending_flip_queue)); - wait_event(dev_priv->pending_flip_queue, - !intel_crtc_has_pending_flip(crtc)); + WARN_ON(wait_event_timeout(dev_priv->pending_flip_queue, + !intel_crtc_has_pending_flip(crtc), + 60*HZ) == 0); mutex_lock(&dev->struct_mutex); intel_finish_fb(crtc->primary->fb); @@ -3341,7 +3514,7 @@ static void ironlake_pch_enable(struct drm_crtc *crtc) * Note that enable_shared_dpll tries to do the right thing, but * get_shared_dpll unconditionally resets the pll - we need that to have * the right LVDS enable sequence. */ - ironlake_enable_shared_dpll(intel_crtc); + intel_enable_shared_dpll(intel_crtc); /* set transcoder timing, panel must allow it */ assert_panel_unlocked(dev_priv, pipe); @@ -3445,6 +3618,8 @@ static struct intel_shared_dpll *intel_get_shared_dpll(struct intel_crtc *crtc) DRM_DEBUG_KMS("CRTC:%d using pre-allocated %s\n", crtc->base.base.id, pll->name); + WARN_ON(pll->refcount); + goto found; } @@ -3478,20 +3653,13 @@ static struct intel_shared_dpll *intel_get_shared_dpll(struct intel_crtc *crtc) return NULL; found: + if (pll->refcount == 0) + pll->hw_state = crtc->config.dpll_hw_state; + crtc->config.shared_dpll = i; DRM_DEBUG_DRIVER("using %s for pipe %c\n", pll->name, pipe_name(crtc->pipe)); - if (pll->active == 0) { - memcpy(&pll->hw_state, &crtc->config.dpll_hw_state, - sizeof(pll->hw_state)); - - DRM_DEBUG_DRIVER("setting up %s\n", pll->name); - WARN_ON(pll->on); - assert_shared_dpll_disabled(dev_priv, pll); - - pll->mode_set(dev_priv, pll); - } pll->refcount++; return pll; @@ -3562,17 +3730,17 @@ static void intel_disable_planes(struct drm_crtc *crtc) void hsw_enable_ips(struct intel_crtc *crtc) { - struct drm_i915_private *dev_priv = crtc->base.dev->dev_private; + struct drm_device *dev = crtc->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; if (!crtc->config.ips_enabled) return; - /* We can only enable IPS after we enable a plane and wait for a vblank. - * We guarantee that the plane is enabled by calling intel_enable_ips - * only after intel_enable_plane. And intel_enable_plane already waits - * for a vblank, so all we need to do here is to enable the IPS bit. */ + /* We can only enable IPS after we enable a plane and wait for a vblank */ + intel_wait_for_vblank(dev, crtc->pipe); + assert_plane_enabled(dev_priv, crtc->plane); - if (IS_BROADWELL(crtc->base.dev)) { + if (IS_BROADWELL(dev)) { mutex_lock(&dev_priv->rps.hw_lock); WARN_ON(sandybridge_pcode_write(dev_priv, DISPLAY_IPS_CONTROL, 0xc0000000)); mutex_unlock(&dev_priv->rps.hw_lock); @@ -3602,10 +3770,13 @@ void hsw_disable_ips(struct intel_crtc *crtc) return; assert_plane_enabled(dev_priv, crtc->plane); - if (IS_BROADWELL(crtc->base.dev)) { + if (IS_BROADWELL(dev)) { mutex_lock(&dev_priv->rps.hw_lock); WARN_ON(sandybridge_pcode_write(dev_priv, DISPLAY_IPS_CONTROL, 0)); mutex_unlock(&dev_priv->rps.hw_lock); + /* wait for pcode to finish disabling IPS, which may take up to 42ms */ + if (wait_for((I915_READ(IPS_CTL) & IPS_ENABLE) == 0, 42)) + DRM_ERROR("Timed out waiting for IPS disable\n"); } else { I915_WRITE(IPS_CTL, 0); POSTING_READ(IPS_CTL); @@ -3662,6 +3833,94 @@ static void intel_crtc_load_lut(struct drm_crtc *crtc) hsw_enable_ips(intel_crtc); } +static void intel_crtc_dpms_overlay(struct intel_crtc *intel_crtc, bool enable) +{ + if (!enable && intel_crtc->overlay) { + struct drm_device *dev = intel_crtc->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + + mutex_lock(&dev->struct_mutex); + dev_priv->mm.interruptible = false; + (void) intel_overlay_switch_off(intel_crtc->overlay); + dev_priv->mm.interruptible = true; + mutex_unlock(&dev->struct_mutex); + } + + /* Let userspace switch the overlay on again. In most cases userspace + * has to recompute where to put it anyway. + */ +} + +/** + * i9xx_fixup_plane - ugly workaround for G45 to fire up the hardware + * cursor plane briefly if not already running after enabling the display + * plane. + * This workaround avoids occasional blank screens when self refresh is + * enabled. + */ +static void +g4x_fixup_plane(struct drm_i915_private *dev_priv, enum pipe pipe) +{ + u32 cntl = I915_READ(CURCNTR(pipe)); + + if ((cntl & CURSOR_MODE) == 0) { + u32 fw_bcl_self = I915_READ(FW_BLC_SELF); + + I915_WRITE(FW_BLC_SELF, fw_bcl_self & ~FW_BLC_SELF_EN); + I915_WRITE(CURCNTR(pipe), CURSOR_MODE_64_ARGB_AX); + intel_wait_for_vblank(dev_priv->dev, pipe); + I915_WRITE(CURCNTR(pipe), cntl); + I915_WRITE(CURBASE(pipe), I915_READ(CURBASE(pipe))); + I915_WRITE(FW_BLC_SELF, fw_bcl_self); + } +} + +static void intel_crtc_enable_planes(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int pipe = intel_crtc->pipe; + int plane = intel_crtc->plane; + + intel_enable_primary_hw_plane(dev_priv, plane, pipe); + intel_enable_planes(crtc); + /* The fixup needs to happen before cursor is enabled */ + if (IS_G4X(dev)) + g4x_fixup_plane(dev_priv, pipe); + intel_crtc_update_cursor(crtc, true); + intel_crtc_dpms_overlay(intel_crtc, true); + + hsw_enable_ips(intel_crtc); + + mutex_lock(&dev->struct_mutex); + intel_update_fbc(dev); + intel_edp_psr_update(dev); + mutex_unlock(&dev->struct_mutex); +} + +static void intel_crtc_disable_planes(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int pipe = intel_crtc->pipe; + int plane = intel_crtc->plane; + + intel_crtc_wait_for_pending_flips(crtc); + drm_crtc_vblank_off(crtc); + + if (dev_priv->fbc.plane == plane) + intel_disable_fbc(dev); + + hsw_disable_ips(intel_crtc); + + intel_crtc_dpms_overlay(intel_crtc, false); + intel_crtc_update_cursor(crtc, false); + intel_disable_planes(crtc); + intel_disable_primary_hw_plane(dev_priv, plane, pipe); +} + static void ironlake_crtc_enable(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; @@ -3669,13 +3928,35 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct intel_encoder *encoder; int pipe = intel_crtc->pipe; - int plane = intel_crtc->plane; + enum plane plane = intel_crtc->plane; WARN_ON(!crtc->enabled); if (intel_crtc->active) return; + if (intel_crtc->config.has_pch_encoder) + intel_prepare_shared_dpll(intel_crtc); + + if (intel_crtc->config.has_dp_encoder) + intel_dp_set_m_n(intel_crtc); + + intel_set_pipe_timings(intel_crtc); + + if (intel_crtc->config.has_pch_encoder) { + intel_cpu_transcoder_set_m_n(intel_crtc, + &intel_crtc->config.fdi_m_n); + } + + ironlake_set_pipeconf(crtc); + + /* Set up the display plane register */ + I915_WRITE(DSPCNTR(plane), DISPPLANE_GAMMA_ENABLE); + POSTING_READ(DSPCNTR(plane)); + + dev_priv->display.update_primary_plane(crtc, crtc->primary->fb, + crtc->x, crtc->y); + intel_crtc->active = true; intel_set_cpu_fifo_underrun_reporting(dev, pipe, true); @@ -3705,32 +3986,19 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) intel_update_watermarks(crtc); intel_enable_pipe(intel_crtc); - intel_enable_primary_hw_plane(dev_priv, plane, pipe); - intel_enable_planes(crtc); - intel_crtc_update_cursor(crtc, true); if (intel_crtc->config.has_pch_encoder) ironlake_pch_enable(crtc); - mutex_lock(&dev->struct_mutex); - intel_update_fbc(dev); - mutex_unlock(&dev->struct_mutex); - for_each_encoder_on_crtc(dev, crtc, encoder) encoder->enable(encoder); if (HAS_PCH_CPT(dev)) cpt_verify_modeset(dev, intel_crtc->pipe); - /* - * There seems to be a race in PCH platform hw (at least on some - * outputs) where an enabled pipe still completes any pageflip right - * away (as if the pipe is off) instead of waiting for vblank. As soon - * as the first vblank happend, everything works as expected. Hence just - * wait for one vblank before returning to avoid strange things - * happening. - */ - intel_wait_for_vblank(dev, intel_crtc->pipe); + intel_crtc_enable_planes(crtc); + + drm_crtc_vblank_on(crtc); } /* IPS only exists on ULT machines and is tied to pipe A. */ @@ -3739,47 +4007,6 @@ static bool hsw_crtc_supports_ips(struct intel_crtc *crtc) return HAS_IPS(crtc->base.dev) && crtc->pipe == PIPE_A; } -static void haswell_crtc_enable_planes(struct drm_crtc *crtc) -{ - struct drm_device *dev = crtc->dev; - struct drm_i915_private *dev_priv = dev->dev_private; - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - int pipe = intel_crtc->pipe; - int plane = intel_crtc->plane; - - intel_enable_primary_hw_plane(dev_priv, plane, pipe); - intel_enable_planes(crtc); - intel_crtc_update_cursor(crtc, true); - - hsw_enable_ips(intel_crtc); - - mutex_lock(&dev->struct_mutex); - intel_update_fbc(dev); - mutex_unlock(&dev->struct_mutex); -} - -static void haswell_crtc_disable_planes(struct drm_crtc *crtc) -{ - struct drm_device *dev = crtc->dev; - struct drm_i915_private *dev_priv = dev->dev_private; - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - int pipe = intel_crtc->pipe; - int plane = intel_crtc->plane; - - intel_crtc_wait_for_pending_flips(crtc); - drm_vblank_off(dev, pipe); - - /* FBC must be disabled before disabling the plane on HSW. */ - if (dev_priv->fbc.plane == plane) - intel_disable_fbc(dev); - - hsw_disable_ips(intel_crtc); - - intel_crtc_update_cursor(crtc, false); - intel_disable_planes(crtc); - intel_disable_primary_hw_plane(dev_priv, plane, pipe); -} - /* * This implements the workaround described in the "notes" section of the mode * set sequence documentation. When going from no pipes or single pipe to @@ -3793,7 +4020,7 @@ static void haswell_mode_set_planes_workaround(struct intel_crtc *crtc) /* We want to get the other_active_crtc only if there's only 1 other * active crtc. */ - list_for_each_entry(crtc_it, &dev->mode_config.crtc_list, base.head) { + for_each_intel_crtc(dev, crtc_it) { if (!crtc_it->active || crtc_it == crtc) continue; @@ -3816,12 +4043,34 @@ static void haswell_crtc_enable(struct drm_crtc *crtc) struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct intel_encoder *encoder; int pipe = intel_crtc->pipe; + enum plane plane = intel_crtc->plane; WARN_ON(!crtc->enabled); if (intel_crtc->active) return; + if (intel_crtc->config.has_dp_encoder) + intel_dp_set_m_n(intel_crtc); + + intel_set_pipe_timings(intel_crtc); + + if (intel_crtc->config.has_pch_encoder) { + intel_cpu_transcoder_set_m_n(intel_crtc, + &intel_crtc->config.fdi_m_n); + } + + haswell_set_pipeconf(crtc); + + intel_set_pipe_csc(crtc); + + /* Set up the display plane register */ + I915_WRITE(DSPCNTR(plane), DISPPLANE_GAMMA_ENABLE | DISPPLANE_PIPE_CSC_ENABLE); + POSTING_READ(DSPCNTR(plane)); + + dev_priv->display.update_primary_plane(crtc, crtc->primary->fb, + crtc->x, crtc->y); + intel_crtc->active = true; intel_set_cpu_fifo_underrun_reporting(dev, pipe, true); @@ -3862,7 +4111,9 @@ static void haswell_crtc_enable(struct drm_crtc *crtc) /* If we change the relative order between pipe/planes enabling, we need * to change the workaround. */ haswell_mode_set_planes_workaround(intel_crtc); - haswell_crtc_enable_planes(crtc); + intel_crtc_enable_planes(crtc); + + drm_crtc_vblank_on(crtc); } static void ironlake_pfit_disable(struct intel_crtc *crtc) @@ -3887,26 +4138,16 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc) struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct intel_encoder *encoder; int pipe = intel_crtc->pipe; - int plane = intel_crtc->plane; u32 reg, temp; - if (!intel_crtc->active) return; + intel_crtc_disable_planes(crtc); + for_each_encoder_on_crtc(dev, crtc, encoder) encoder->disable(encoder); - intel_crtc_wait_for_pending_flips(crtc); - drm_vblank_off(dev, pipe); - - if (dev_priv->fbc.plane == plane) - intel_disable_fbc(dev); - - intel_crtc_update_cursor(crtc, false); - intel_disable_planes(crtc); - intel_disable_primary_hw_plane(dev_priv, plane, pipe); - if (intel_crtc->config.has_pch_encoder) intel_set_pch_fifo_underrun_reporting(dev, pipe, false); @@ -3950,6 +4191,7 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc) mutex_lock(&dev->struct_mutex); intel_update_fbc(dev); + intel_edp_psr_update(dev); mutex_unlock(&dev->struct_mutex); } @@ -3965,7 +4207,7 @@ static void haswell_crtc_disable(struct drm_crtc *crtc) if (!intel_crtc->active) return; - haswell_crtc_disable_planes(crtc); + intel_crtc_disable_planes(crtc); for_each_encoder_on_crtc(dev, crtc, encoder) { intel_opregion_notify_encoder(encoder, false); @@ -3997,6 +4239,7 @@ static void haswell_crtc_disable(struct drm_crtc *crtc) mutex_lock(&dev->struct_mutex); intel_update_fbc(dev); + intel_edp_psr_update(dev); mutex_unlock(&dev->struct_mutex); } @@ -4011,48 +4254,6 @@ static void haswell_crtc_off(struct drm_crtc *crtc) intel_ddi_put_crtc_pll(crtc); } -static void intel_crtc_dpms_overlay(struct intel_crtc *intel_crtc, bool enable) -{ - if (!enable && intel_crtc->overlay) { - struct drm_device *dev = intel_crtc->base.dev; - struct drm_i915_private *dev_priv = dev->dev_private; - - mutex_lock(&dev->struct_mutex); - dev_priv->mm.interruptible = false; - (void) intel_overlay_switch_off(intel_crtc->overlay); - dev_priv->mm.interruptible = true; - mutex_unlock(&dev->struct_mutex); - } - - /* Let userspace switch the overlay on again. In most cases userspace - * has to recompute where to put it anyway. - */ -} - -/** - * i9xx_fixup_plane - ugly workaround for G45 to fire up the hardware - * cursor plane briefly if not already running after enabling the display - * plane. - * This workaround avoids occasional blank screens when self refresh is - * enabled. - */ -static void -g4x_fixup_plane(struct drm_i915_private *dev_priv, enum pipe pipe) -{ - u32 cntl = I915_READ(CURCNTR(pipe)); - - if ((cntl & CURSOR_MODE) == 0) { - u32 fw_bcl_self = I915_READ(FW_BLC_SELF); - - I915_WRITE(FW_BLC_SELF, fw_bcl_self & ~FW_BLC_SELF_EN); - I915_WRITE(CURCNTR(pipe), CURSOR_MODE_64_ARGB_AX); - intel_wait_for_vblank(dev_priv->dev, pipe); - I915_WRITE(CURCNTR(pipe), cntl); - I915_WRITE(CURBASE(pipe), I915_READ(CURBASE(pipe))); - I915_WRITE(FW_BLC_SELF, fw_bcl_self); - } -} - static void i9xx_pfit_enable(struct intel_crtc *crtc) { struct drm_device *dev = crtc->base.dev; @@ -4164,7 +4365,7 @@ static void modeset_update_crtc_power_domains(struct drm_device *dev) * First get all needed power domains, then put all unneeded, to avoid * any unnecessary toggling of the power wells. */ - list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) { + for_each_intel_crtc(dev, crtc) { enum intel_display_power_domain domain; if (!crtc->base.enabled) @@ -4176,7 +4377,7 @@ static void modeset_update_crtc_power_domains(struct drm_device *dev) intel_display_power_get(dev_priv, domain); } - list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) { + for_each_intel_crtc(dev, crtc) { enum intel_display_power_domain domain; for_each_power_domain(domain, crtc->enabled_power_domains) @@ -4207,6 +4408,9 @@ static void valleyview_set_cdclk(struct drm_device *dev, int cdclk) struct drm_i915_private *dev_priv = dev->dev_private; u32 val, cmd; + WARN_ON(valleyview_cur_cdclk(dev_priv) != dev_priv->vlv_cdclk_freq); + dev_priv->vlv_cdclk_freq = cdclk; + if (cdclk >= 320) /* jump to highest voltage for 400MHz too */ cmd = 2; else if (cdclk == 266) @@ -4261,7 +4465,7 @@ static void valleyview_set_cdclk(struct drm_device *dev, int cdclk) intel_i2c_reset(dev); } -static int valleyview_cur_cdclk(struct drm_i915_private *dev_priv) +int valleyview_cur_cdclk(struct drm_i915_private *dev_priv) { int cur_cdclk, vco; int divider; @@ -4282,10 +4486,6 @@ static int valleyview_cur_cdclk(struct drm_i915_private *dev_priv) static int valleyview_calc_cdclk(struct drm_i915_private *dev_priv, int max_pixclk) { - int cur_cdclk; - - cur_cdclk = valleyview_cur_cdclk(dev_priv); - /* * Really only a few cases to deal with, as only 4 CDclks are supported: * 200MHz @@ -4311,8 +4511,7 @@ static int intel_mode_max_pixclk(struct drm_i915_private *dev_priv) struct intel_crtc *intel_crtc; int max_pixclk = 0; - list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list, - base.head) { + for_each_intel_crtc(dev, intel_crtc) { if (intel_crtc->new_enabled) max_pixclk = max(max_pixclk, intel_crtc->new_config->adjusted_mode.crtc_clock); @@ -4327,14 +4526,13 @@ static void valleyview_modeset_global_pipes(struct drm_device *dev, struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc; int max_pixclk = intel_mode_max_pixclk(dev_priv); - int cur_cdclk = valleyview_cur_cdclk(dev_priv); - if (valleyview_calc_cdclk(dev_priv, max_pixclk) == cur_cdclk) + if (valleyview_calc_cdclk(dev_priv, max_pixclk) == + dev_priv->vlv_cdclk_freq) return; /* disable/enable all currently active pipes while we change cdclk */ - list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list, - base.head) + for_each_intel_crtc(dev, intel_crtc) if (intel_crtc->base.enabled) *prepare_pipes |= (1 << intel_crtc->pipe); } @@ -4343,10 +4541,9 @@ static void valleyview_modeset_global_resources(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; int max_pixclk = intel_mode_max_pixclk(dev_priv); - int cur_cdclk = valleyview_cur_cdclk(dev_priv); int req_cdclk = valleyview_calc_cdclk(dev_priv, max_pixclk); - if (req_cdclk != cur_cdclk) + if (req_cdclk != dev_priv->vlv_cdclk_freq) valleyview_set_cdclk(dev, req_cdclk); modeset_update_crtc_power_domains(dev); } @@ -4360,22 +4557,55 @@ static void valleyview_crtc_enable(struct drm_crtc *crtc) int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; bool is_dsi; + u32 dspcntr; WARN_ON(!crtc->enabled); if (intel_crtc->active) return; + vlv_prepare_pll(intel_crtc); + + /* Set up the display plane register */ + dspcntr = DISPPLANE_GAMMA_ENABLE; + + if (intel_crtc->config.has_dp_encoder) + intel_dp_set_m_n(intel_crtc); + + intel_set_pipe_timings(intel_crtc); + + /* pipesrc and dspsize control the size that is scaled from, + * which should always be the user's requested size. + */ + I915_WRITE(DSPSIZE(plane), + ((intel_crtc->config.pipe_src_h - 1) << 16) | + (intel_crtc->config.pipe_src_w - 1)); + I915_WRITE(DSPPOS(plane), 0); + + i9xx_set_pipeconf(intel_crtc); + + I915_WRITE(DSPCNTR(plane), dspcntr); + POSTING_READ(DSPCNTR(plane)); + + dev_priv->display.update_primary_plane(crtc, crtc->primary->fb, + crtc->x, crtc->y); + intel_crtc->active = true; + intel_set_cpu_fifo_underrun_reporting(dev, pipe, true); + for_each_encoder_on_crtc(dev, crtc, encoder) if (encoder->pre_pll_enable) encoder->pre_pll_enable(encoder); is_dsi = intel_pipe_has_type(crtc, INTEL_OUTPUT_DSI); - if (!is_dsi) - vlv_enable_pll(intel_crtc); + if (!is_dsi) { + if (IS_CHERRYVIEW(dev)) + chv_enable_pll(intel_crtc); + else + vlv_enable_pll(intel_crtc); + } for_each_encoder_on_crtc(dev, crtc, encoder) if (encoder->pre_enable) @@ -4387,15 +4617,25 @@ static void valleyview_crtc_enable(struct drm_crtc *crtc) intel_update_watermarks(crtc); intel_enable_pipe(intel_crtc); - intel_set_cpu_fifo_underrun_reporting(dev, pipe, true); - intel_enable_primary_hw_plane(dev_priv, plane, pipe); - intel_enable_planes(crtc); - intel_crtc_update_cursor(crtc, true); - - intel_update_fbc(dev); for_each_encoder_on_crtc(dev, crtc, encoder) encoder->enable(encoder); + + intel_crtc_enable_planes(crtc); + + drm_crtc_vblank_on(crtc); + + /* Underruns don't raise interrupts, so check manually. */ + i9xx_check_fifo_underruns(dev); +} + +static void i9xx_set_pll_dividers(struct intel_crtc *crtc) +{ + struct drm_device *dev = crtc->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + + I915_WRITE(FP0(crtc->pipe), crtc->config.dpll_hw_state.fp0); + I915_WRITE(FP1(crtc->pipe), crtc->config.dpll_hw_state.fp1); } static void i9xx_crtc_enable(struct drm_crtc *crtc) @@ -4406,14 +4646,49 @@ static void i9xx_crtc_enable(struct drm_crtc *crtc) struct intel_encoder *encoder; int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; + u32 dspcntr; WARN_ON(!crtc->enabled); if (intel_crtc->active) return; + i9xx_set_pll_dividers(intel_crtc); + + /* Set up the display plane register */ + dspcntr = DISPPLANE_GAMMA_ENABLE; + + if (pipe == 0) + dspcntr &= ~DISPPLANE_SEL_PIPE_MASK; + else + dspcntr |= DISPPLANE_SEL_PIPE_B; + + if (intel_crtc->config.has_dp_encoder) + intel_dp_set_m_n(intel_crtc); + + intel_set_pipe_timings(intel_crtc); + + /* pipesrc and dspsize control the size that is scaled from, + * which should always be the user's requested size. + */ + I915_WRITE(DSPSIZE(plane), + ((intel_crtc->config.pipe_src_h - 1) << 16) | + (intel_crtc->config.pipe_src_w - 1)); + I915_WRITE(DSPPOS(plane), 0); + + i9xx_set_pipeconf(intel_crtc); + + I915_WRITE(DSPCNTR(plane), dspcntr); + POSTING_READ(DSPCNTR(plane)); + + dev_priv->display.update_primary_plane(crtc, crtc->primary->fb, + crtc->x, crtc->y); + intel_crtc->active = true; + if (!IS_GEN2(dev)) + intel_set_cpu_fifo_underrun_reporting(dev, pipe, true); + for_each_encoder_on_crtc(dev, crtc, encoder) if (encoder->pre_enable) encoder->pre_enable(encoder); @@ -4426,21 +4701,26 @@ static void i9xx_crtc_enable(struct drm_crtc *crtc) intel_update_watermarks(crtc); intel_enable_pipe(intel_crtc); - intel_set_cpu_fifo_underrun_reporting(dev, pipe, true); - intel_enable_primary_hw_plane(dev_priv, plane, pipe); - intel_enable_planes(crtc); - /* The fixup needs to happen before cursor is enabled */ - if (IS_G4X(dev)) - g4x_fixup_plane(dev_priv, pipe); - intel_crtc_update_cursor(crtc, true); - - /* Give the overlay scaler a chance to enable if it's on this pipe */ - intel_crtc_dpms_overlay(intel_crtc, true); - - intel_update_fbc(dev); for_each_encoder_on_crtc(dev, crtc, encoder) encoder->enable(encoder); + + intel_crtc_enable_planes(crtc); + + /* + * Gen2 reports pipe underruns whenever all planes are disabled. + * So don't enable underrun reporting before at least some planes + * are enabled. + * FIXME: Need to fix the logic to work when we turn off all planes + * but leave the pipe running. + */ + if (IS_GEN2(dev)) + intel_set_cpu_fifo_underrun_reporting(dev, pipe, true); + + drm_crtc_vblank_on(crtc); + + /* Underruns don't raise interrupts, so check manually. */ + i9xx_check_fifo_underruns(dev); } static void i9xx_pfit_disable(struct intel_crtc *crtc) @@ -4465,27 +4745,31 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc) struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct intel_encoder *encoder; int pipe = intel_crtc->pipe; - int plane = intel_crtc->plane; if (!intel_crtc->active) return; - for_each_encoder_on_crtc(dev, crtc, encoder) - encoder->disable(encoder); + /* + * Gen2 reports pipe underruns whenever all planes are disabled. + * So diasble underrun reporting before all the planes get disabled. + * FIXME: Need to fix the logic to work when we turn off all planes + * but leave the pipe running. + */ + if (IS_GEN2(dev)) + intel_set_cpu_fifo_underrun_reporting(dev, pipe, false); - /* Give the overlay scaler a chance to disable if it's on this pipe */ - intel_crtc_wait_for_pending_flips(crtc); - drm_vblank_off(dev, pipe); + intel_crtc_disable_planes(crtc); - if (dev_priv->fbc.plane == plane) - intel_disable_fbc(dev); + for_each_encoder_on_crtc(dev, crtc, encoder) + encoder->disable(encoder); - intel_crtc_dpms_overlay(intel_crtc, false); - intel_crtc_update_cursor(crtc, false); - intel_disable_planes(crtc); - intel_disable_primary_hw_plane(dev_priv, plane, pipe); + /* + * On gen2 planes are double buffered but the pipe isn't, so we must + * wait for planes to fully turn off before disabling the pipe. + */ + if (IS_GEN2(dev)) + intel_wait_for_vblank(dev, pipe); - intel_set_cpu_fifo_underrun_reporting(dev, pipe, false); intel_disable_pipe(dev_priv, pipe); i9xx_pfit_disable(intel_crtc); @@ -4494,15 +4778,25 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc) if (encoder->post_disable) encoder->post_disable(encoder); - if (IS_VALLEYVIEW(dev) && !intel_pipe_has_type(crtc, INTEL_OUTPUT_DSI)) - vlv_disable_pll(dev_priv, pipe); - else if (!IS_VALLEYVIEW(dev)) - i9xx_disable_pll(dev_priv, pipe); + if (!intel_pipe_has_type(crtc, INTEL_OUTPUT_DSI)) { + if (IS_CHERRYVIEW(dev)) + chv_disable_pll(dev_priv, pipe); + else if (IS_VALLEYVIEW(dev)) + vlv_disable_pll(dev_priv, pipe); + else + i9xx_disable_pll(dev_priv, pipe); + } + + if (!IS_GEN2(dev)) + intel_set_cpu_fifo_underrun_reporting(dev, pipe, false); intel_crtc->active = false; intel_update_watermarks(crtc); + mutex_lock(&dev->struct_mutex); intel_update_fbc(dev); + intel_edp_psr_update(dev); + mutex_unlock(&dev->struct_mutex); } static void i9xx_crtc_off(struct drm_crtc *crtc) @@ -4565,13 +4859,11 @@ static void intel_crtc_disable(struct drm_crtc *crtc) struct drm_device *dev = crtc->dev; struct drm_connector *connector; struct drm_i915_private *dev_priv = dev->dev_private; - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); /* crtc should still be enabled when we disable it. */ WARN_ON(!crtc->enabled); dev_priv->display.crtc_disable(crtc); - intel_crtc->eld_vld = false; intel_crtc_update_sarea(crtc, false); dev_priv->display.off(crtc); @@ -4635,7 +4927,7 @@ static void intel_connector_check_state(struct intel_connector *connector) DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", connector->base.base.id, - drm_get_connector_name(&connector->base)); + connector->base.name); WARN(connector->base.dpms == DRM_MODE_DPMS_OFF, "wrong connector dpms state\n"); @@ -5039,8 +5331,6 @@ static void i9xx_update_pll_dividers(struct intel_crtc *crtc, intel_clock_t *reduced_clock) { struct drm_device *dev = crtc->base.dev; - struct drm_i915_private *dev_priv = dev->dev_private; - int pipe = crtc->pipe; u32 fp, fp2 = 0; if (IS_PINEVIEW(dev)) { @@ -5053,17 +5343,14 @@ static void i9xx_update_pll_dividers(struct intel_crtc *crtc, fp2 = i9xx_dpll_compute_fp(reduced_clock); } - I915_WRITE(FP0(pipe), fp); crtc->config.dpll_hw_state.fp0 = fp; crtc->lowfreq_avail = false; if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) && reduced_clock && i915.powersave) { - I915_WRITE(FP1(pipe), fp2); crtc->config.dpll_hw_state.fp1 = fp2; crtc->lowfreq_avail = true; } else { - I915_WRITE(FP1(pipe), fp); crtc->config.dpll_hw_state.fp1 = fp; } } @@ -5141,12 +5428,34 @@ static void intel_dp_set_m_n(struct intel_crtc *crtc) static void vlv_update_pll(struct intel_crtc *crtc) { + u32 dpll, dpll_md; + + /* + * Enable DPIO clock input. We should never disable the reference + * clock for pipe B, since VGA hotplug / manual detection depends + * on it. + */ + dpll = DPLL_EXT_BUFFER_ENABLE_VLV | DPLL_REFA_CLK_ENABLE_VLV | + DPLL_VGA_MODE_DIS | DPLL_INTEGRATED_CLOCK_VLV; + /* We should never disable this, set it here for state tracking */ + if (crtc->pipe == PIPE_B) + dpll |= DPLL_INTEGRATED_CRI_CLK_VLV; + dpll |= DPLL_VCO_ENABLE; + crtc->config.dpll_hw_state.dpll = dpll; + + dpll_md = (crtc->config.pixel_multiplier - 1) + << DPLL_MD_UDI_MULTIPLIER_SHIFT; + crtc->config.dpll_hw_state.dpll_md = dpll_md; +} + +static void vlv_prepare_pll(struct intel_crtc *crtc) +{ struct drm_device *dev = crtc->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; int pipe = crtc->pipe; - u32 dpll, mdiv; + u32 mdiv; u32 bestn, bestm1, bestm2, bestp1, bestp2; - u32 coreclk, reg_val, dpll_md; + u32 coreclk, reg_val; mutex_lock(&dev_priv->dpio_lock); @@ -5159,7 +5468,7 @@ static void vlv_update_pll(struct intel_crtc *crtc) /* See eDP HDMI DPIO driver vbios notes doc */ /* PLL B needs special handling */ - if (pipe) + if (pipe == PIPE_B) vlv_pllb_recal_opamp(dev_priv, pipe); /* Set up Tx target for periodic Rcomp update */ @@ -5203,7 +5512,7 @@ static void vlv_update_pll(struct intel_crtc *crtc) if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_EDP) || intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT)) { /* Use SSC source */ - if (!pipe) + if (pipe == PIPE_A) vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe), 0x0df40000); else @@ -5211,7 +5520,7 @@ static void vlv_update_pll(struct intel_crtc *crtc) 0x0df70000); } else { /* HDMI or VGA */ /* Use bend source */ - if (!pipe) + if (pipe == PIPE_A) vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe), 0x0df70000); else @@ -5227,26 +5536,84 @@ static void vlv_update_pll(struct intel_crtc *crtc) vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW7(pipe), coreclk); vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW11(pipe), 0x87871000); + mutex_unlock(&dev_priv->dpio_lock); +} + +static void chv_update_pll(struct intel_crtc *crtc) +{ + struct drm_device *dev = crtc->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + int pipe = crtc->pipe; + int dpll_reg = DPLL(crtc->pipe); + enum dpio_channel port = vlv_pipe_to_channel(pipe); + u32 loopfilter, intcoeff; + u32 bestn, bestm1, bestm2, bestp1, bestp2, bestm2_frac; + int refclk; + + crtc->config.dpll_hw_state.dpll = DPLL_SSC_REF_CLOCK_CHV | + DPLL_REFA_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS | + DPLL_VCO_ENABLE; + if (pipe != PIPE_A) + crtc->config.dpll_hw_state.dpll |= DPLL_INTEGRATED_CRI_CLK_VLV; + + crtc->config.dpll_hw_state.dpll_md = + (crtc->config.pixel_multiplier - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT; + + bestn = crtc->config.dpll.n; + bestm2_frac = crtc->config.dpll.m2 & 0x3fffff; + bestm1 = crtc->config.dpll.m1; + bestm2 = crtc->config.dpll.m2 >> 22; + bestp1 = crtc->config.dpll.p1; + bestp2 = crtc->config.dpll.p2; /* - * Enable DPIO clock input. We should never disable the reference - * clock for pipe B, since VGA hotplug / manual detection depends - * on it. + * Enable Refclk and SSC */ - dpll = DPLL_EXT_BUFFER_ENABLE_VLV | DPLL_REFA_CLK_ENABLE_VLV | - DPLL_VGA_MODE_DIS | DPLL_INTEGRATED_CLOCK_VLV; - /* We should never disable this, set it here for state tracking */ - if (pipe == PIPE_B) - dpll |= DPLL_INTEGRATED_CRI_CLK_VLV; - dpll |= DPLL_VCO_ENABLE; - crtc->config.dpll_hw_state.dpll = dpll; + I915_WRITE(dpll_reg, + crtc->config.dpll_hw_state.dpll & ~DPLL_VCO_ENABLE); - dpll_md = (crtc->config.pixel_multiplier - 1) - << DPLL_MD_UDI_MULTIPLIER_SHIFT; - crtc->config.dpll_hw_state.dpll_md = dpll_md; + mutex_lock(&dev_priv->dpio_lock); + + /* p1 and p2 divider */ + vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW13(port), + 5 << DPIO_CHV_S1_DIV_SHIFT | + bestp1 << DPIO_CHV_P1_DIV_SHIFT | + bestp2 << DPIO_CHV_P2_DIV_SHIFT | + 1 << DPIO_CHV_K_DIV_SHIFT); + + /* Feedback post-divider - m2 */ + vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW0(port), bestm2); + + /* Feedback refclk divider - n and m1 */ + vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW1(port), + DPIO_CHV_M1_DIV_BY_2 | + 1 << DPIO_CHV_N_DIV_SHIFT); + + /* M2 fraction division */ + vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW2(port), bestm2_frac); + + /* M2 fraction division enable */ + vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW3(port), + DPIO_CHV_FRAC_DIV_EN | + (2 << DPIO_CHV_FEEDFWD_GAIN_SHIFT)); + + /* Loop filter */ + refclk = i9xx_get_refclk(&crtc->base, 0); + loopfilter = 5 << DPIO_CHV_PROP_COEFF_SHIFT | + 2 << DPIO_CHV_GAIN_CTRL_SHIFT; + if (refclk == 100000) + intcoeff = 11; + else if (refclk == 38400) + intcoeff = 10; + else + intcoeff = 9; + loopfilter |= intcoeff << DPIO_CHV_INT_COEFF_SHIFT; + vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW6(port), loopfilter); - if (crtc->config.has_dp_encoder) - intel_dp_set_m_n(crtc); + /* AFC Recal */ + vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), + vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port)) | + DPIO_AFC_RECAL); mutex_unlock(&dev_priv->dpio_lock); } @@ -5325,9 +5692,6 @@ static void i9xx_update_pll(struct intel_crtc *crtc, << DPLL_MD_UDI_MULTIPLIER_SHIFT; crtc->config.dpll_hw_state.dpll_md = dpll_md; } - - if (crtc->config.has_dp_encoder) - intel_dp_set_m_n(crtc); } static void i8xx_update_pll(struct intel_crtc *crtc, @@ -5567,16 +5931,12 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc, struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - int pipe = intel_crtc->pipe; - int plane = intel_crtc->plane; int refclk, num_connectors = 0; intel_clock_t clock, reduced_clock; - u32 dspcntr; bool ok, has_reduced_clock = false; bool is_lvds = false, is_dsi = false; struct intel_encoder *encoder; const intel_limit_t *limit; - int ret; for_each_encoder_on_crtc(dev, crtc, encoder) { switch (encoder->type) { @@ -5592,7 +5952,7 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc, } if (is_dsi) - goto skip_dpll; + return 0; if (!intel_crtc->config.clock_set) { refclk = i9xx_get_refclk(crtc, num_connectors); @@ -5637,43 +5997,17 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc, i8xx_update_pll(intel_crtc, has_reduced_clock ? &reduced_clock : NULL, num_connectors); + } else if (IS_CHERRYVIEW(dev)) { + chv_update_pll(intel_crtc); } else if (IS_VALLEYVIEW(dev)) { vlv_update_pll(intel_crtc); } else { i9xx_update_pll(intel_crtc, has_reduced_clock ? &reduced_clock : NULL, - num_connectors); - } - -skip_dpll: - /* Set up the display plane register */ - dspcntr = DISPPLANE_GAMMA_ENABLE; - - if (!IS_VALLEYVIEW(dev)) { - if (pipe == 0) - dspcntr &= ~DISPPLANE_SEL_PIPE_MASK; - else - dspcntr |= DISPPLANE_SEL_PIPE_B; + num_connectors); } - intel_set_pipe_timings(intel_crtc); - - /* pipesrc and dspsize control the size that is scaled from, - * which should always be the user's requested size. - */ - I915_WRITE(DSPSIZE(plane), - ((intel_crtc->config.pipe_src_h - 1) << 16) | - (intel_crtc->config.pipe_src_w - 1)); - I915_WRITE(DSPPOS(plane), 0); - - i9xx_set_pipeconf(intel_crtc); - - I915_WRITE(DSPCNTR(plane), dspcntr); - POSTING_READ(DSPCNTR(plane)); - - ret = intel_pipe_set_base(crtc, x, y, fb); - - return ret; + return 0; } static void i9xx_get_pfit_config(struct intel_crtc *crtc, @@ -5793,6 +6127,36 @@ static void i9xx_get_plane_config(struct intel_crtc *crtc, } +static void chv_crtc_clock_get(struct intel_crtc *crtc, + struct intel_crtc_config *pipe_config) +{ + struct drm_device *dev = crtc->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + int pipe = pipe_config->cpu_transcoder; + enum dpio_channel port = vlv_pipe_to_channel(pipe); + intel_clock_t clock; + u32 cmn_dw13, pll_dw0, pll_dw1, pll_dw2; + int refclk = 100000; + + mutex_lock(&dev_priv->dpio_lock); + cmn_dw13 = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW13(port)); + pll_dw0 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW0(port)); + pll_dw1 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW1(port)); + pll_dw2 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW2(port)); + mutex_unlock(&dev_priv->dpio_lock); + + clock.m1 = (pll_dw1 & 0x7) == DPIO_CHV_M1_DIV_BY_2 ? 2 : 0; + clock.m2 = ((pll_dw0 & 0xff) << 22) | (pll_dw2 & 0x3fffff); + clock.n = (pll_dw1 >> DPIO_CHV_N_DIV_SHIFT) & 0xf; + clock.p1 = (cmn_dw13 >> DPIO_CHV_P1_DIV_SHIFT) & 0x7; + clock.p2 = (cmn_dw13 >> DPIO_CHV_P2_DIV_SHIFT) & 0x1f; + + chv_clock(refclk, &clock); + + /* clock.dot is the fast clock */ + pipe_config->port_clock = clock.dot / 5; +} + static bool i9xx_get_pipe_config(struct intel_crtc *crtc, struct intel_crtc_config *pipe_config) { @@ -5827,6 +6191,9 @@ static bool i9xx_get_pipe_config(struct intel_crtc *crtc, } } + if (IS_VALLEYVIEW(dev) && (tmp & PIPECONF_COLOR_RANGE_SELECT)) + pipe_config->limited_color_range = true; + if (INTEL_INFO(dev)->gen < 4) pipe_config->double_wide = tmp & PIPECONF_DOUBLE_WIDE; @@ -5862,7 +6229,9 @@ static bool i9xx_get_pipe_config(struct intel_crtc *crtc, DPLL_PORTB_READY_MASK); } - if (IS_VALLEYVIEW(dev)) + if (IS_CHERRYVIEW(dev)) + chv_crtc_clock_get(crtc, pipe_config); + else if (IS_VALLEYVIEW(dev)) vlv_crtc_clock_get(crtc, pipe_config); else i9xx_crtc_clock_get(crtc, pipe_config); @@ -5983,8 +6352,7 @@ static void ironlake_init_pch_refclk(struct drm_device *dev) if (intel_panel_use_ssc(dev_priv) && can_ssc) { DRM_DEBUG_KMS("Using SSC on eDP\n"); val |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD; - } - else + } else val |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD; } else val |= DREF_CPU_SOURCE_OUTPUT_DISABLE; @@ -6563,10 +6931,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, struct drm_framebuffer *fb) { struct drm_device *dev = crtc->dev; - struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - int pipe = intel_crtc->pipe; - int plane = intel_crtc->plane; int num_connectors = 0; intel_clock_t clock, reduced_clock; u32 dpll = 0, fp = 0, fp2 = 0; @@ -6574,7 +6939,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, bool is_lvds = false; struct intel_encoder *encoder; struct intel_shared_dpll *pll; - int ret; for_each_encoder_on_crtc(dev, crtc, encoder) { switch (encoder->type) { @@ -6624,36 +6988,18 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, pll = intel_get_shared_dpll(intel_crtc); if (pll == NULL) { DRM_DEBUG_DRIVER("failed to find PLL for pipe %c\n", - pipe_name(pipe)); + pipe_name(intel_crtc->pipe)); return -EINVAL; } } else intel_put_shared_dpll(intel_crtc); - if (intel_crtc->config.has_dp_encoder) - intel_dp_set_m_n(intel_crtc); - if (is_lvds && has_reduced_clock && i915.powersave) intel_crtc->lowfreq_avail = true; else intel_crtc->lowfreq_avail = false; - intel_set_pipe_timings(intel_crtc); - - if (intel_crtc->config.has_pch_encoder) { - intel_cpu_transcoder_set_m_n(intel_crtc, - &intel_crtc->config.fdi_m_n); - } - - ironlake_set_pipeconf(crtc); - - /* Set up the display plane register */ - I915_WRITE(DSPCNTR(plane), DISPPLANE_GAMMA_ENABLE); - POSTING_READ(DSPCNTR(plane)); - - ret = intel_pipe_set_base(crtc, x, y, fb); - - return ret; + return 0; } static void intel_pch_transcoder_get_m_n(struct intel_crtc *crtc, @@ -6831,6 +7177,9 @@ static bool ironlake_get_pipe_config(struct intel_crtc *crtc, break; } + if (tmp & PIPECONF_COLOR_RANGE_SELECT) + pipe_config->limited_color_range = true; + if (I915_READ(PCH_TRANSCONF(crtc->pipe)) & TRANS_ENABLE) { struct intel_shared_dpll *pll; @@ -6880,10 +7229,8 @@ static void assert_can_disable_lcpll(struct drm_i915_private *dev_priv) struct drm_device *dev = dev_priv->dev; struct intel_ddi_plls *plls = &dev_priv->ddi_plls; struct intel_crtc *crtc; - unsigned long irqflags; - uint32_t val; - list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) + for_each_intel_crtc(dev, crtc) WARN(crtc->active, "CRTC for pipe %c enabled\n", pipe_name(crtc->pipe)); @@ -6902,14 +7249,29 @@ static void assert_can_disable_lcpll(struct drm_i915_private *dev_priv) "Utility pin enabled\n"); WARN(I915_READ(PCH_GTC_CTL) & PCH_GTC_ENABLE, "PCH GTC enabled\n"); - spin_lock_irqsave(&dev_priv->irq_lock, irqflags); - val = I915_READ(DEIMR); - WARN((val | DE_PCH_EVENT_IVB) != 0xffffffff, - "Unexpected DEIMR bits enabled: 0x%x\n", val); - val = I915_READ(SDEIMR); - WARN((val | SDE_HOTPLUG_MASK_CPT) != 0xffffffff, - "Unexpected SDEIMR bits enabled: 0x%x\n", val); - spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); + /* + * In theory we can still leave IRQs enabled, as long as only the HPD + * interrupts remain enabled. We used to check for that, but since it's + * gen-specific and since we only disable LCPLL after we fully disable + * the interrupts, the check below should be enough. + */ + WARN(!dev_priv->pm.irqs_disabled, "IRQs enabled\n"); +} + +static void hsw_write_dcomp(struct drm_i915_private *dev_priv, uint32_t val) +{ + struct drm_device *dev = dev_priv->dev; + + if (IS_HASWELL(dev)) { + mutex_lock(&dev_priv->rps.hw_lock); + if (sandybridge_pcode_write(dev_priv, GEN6_PCODE_WRITE_D_COMP, + val)) + DRM_ERROR("Failed to disable D_COMP\n"); + mutex_unlock(&dev_priv->rps.hw_lock); + } else { + I915_WRITE(D_COMP, val); + } + POSTING_READ(D_COMP); } /* @@ -6949,11 +7311,7 @@ static void hsw_disable_lcpll(struct drm_i915_private *dev_priv, val = I915_READ(D_COMP); val |= D_COMP_COMP_DISABLE; - mutex_lock(&dev_priv->rps.hw_lock); - if (sandybridge_pcode_write(dev_priv, GEN6_PCODE_WRITE_D_COMP, val)) - DRM_ERROR("Failed to disable D_COMP\n"); - mutex_unlock(&dev_priv->rps.hw_lock); - POSTING_READ(D_COMP); + hsw_write_dcomp(dev_priv, val); ndelay(100); if (wait_for((I915_READ(D_COMP) & D_COMP_RCOMP_IN_PROGRESS) == 0, 1)) @@ -7008,11 +7366,7 @@ static void hsw_restore_lcpll(struct drm_i915_private *dev_priv) val = I915_READ(D_COMP); val |= D_COMP_COMP_FORCE; val &= ~D_COMP_COMP_DISABLE; - mutex_lock(&dev_priv->rps.hw_lock); - if (sandybridge_pcode_write(dev_priv, GEN6_PCODE_WRITE_D_COMP, val)) - DRM_ERROR("Failed to enable D_COMP\n"); - mutex_unlock(&dev_priv->rps.hw_lock); - POSTING_READ(D_COMP); + hsw_write_dcomp(dev_priv, val); val = I915_READ(LCPLL_CTL); val &= ~LCPLL_PLL_DISABLE; @@ -7066,8 +7420,6 @@ void hsw_enable_pc8(struct drm_i915_private *dev_priv) struct drm_device *dev = dev_priv->dev; uint32_t val; - WARN_ON(!HAS_PC8(dev)); - DRM_DEBUG_KMS("Enabling package C8+\n"); if (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) { @@ -7077,7 +7429,6 @@ void hsw_enable_pc8(struct drm_i915_private *dev_priv) } lpt_disable_clkout_dp(dev); - hsw_runtime_pm_disable_interrupts(dev); hsw_disable_lcpll(dev_priv, true, true); } @@ -7086,12 +7437,9 @@ void hsw_disable_pc8(struct drm_i915_private *dev_priv) struct drm_device *dev = dev_priv->dev; uint32_t val; - WARN_ON(!HAS_PC8(dev)); - DRM_DEBUG_KMS("Disabling package C8+\n"); hsw_restore_lcpll(dev_priv); - hsw_runtime_pm_restore_interrupts(dev); lpt_init_pch_refclk(dev); if (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) { @@ -7101,10 +7449,11 @@ void hsw_disable_pc8(struct drm_i915_private *dev_priv) } intel_prepare_ddi(dev); - i915_gem_init_swizzling(dev); - mutex_lock(&dev_priv->rps.hw_lock); - gen6_update_ring_freq(dev); - mutex_unlock(&dev_priv->rps.hw_lock); +} + +static void snb_modeset_global_resources(struct drm_device *dev) +{ + modeset_update_crtc_power_domains(dev); } static void haswell_modeset_global_resources(struct drm_device *dev) @@ -7116,39 +7465,15 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc, int x, int y, struct drm_framebuffer *fb) { - struct drm_device *dev = crtc->dev; - struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - int plane = intel_crtc->plane; - int ret; if (!intel_ddi_pll_select(intel_crtc)) return -EINVAL; intel_ddi_pll_enable(intel_crtc); - if (intel_crtc->config.has_dp_encoder) - intel_dp_set_m_n(intel_crtc); - intel_crtc->lowfreq_avail = false; - intel_set_pipe_timings(intel_crtc); - - if (intel_crtc->config.has_pch_encoder) { - intel_cpu_transcoder_set_m_n(intel_crtc, - &intel_crtc->config.fdi_m_n); - } - - haswell_set_pipeconf(crtc); - - intel_set_pipe_csc(crtc); - - /* Set up the display plane register */ - I915_WRITE(DSPCNTR(plane), DISPPLANE_GAMMA_ENABLE | DISPPLANE_PIPE_CSC_ENABLE); - POSTING_READ(DSPCNTR(plane)); - - ret = intel_pipe_set_base(crtc, x, y, fb); - - return ret; + return 0; } static bool haswell_get_pipe_config(struct intel_crtc *crtc, @@ -7228,38 +7553,6 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc, return true; } -static int intel_crtc_mode_set(struct drm_crtc *crtc, - int x, int y, - struct drm_framebuffer *fb) -{ - struct drm_device *dev = crtc->dev; - struct drm_i915_private *dev_priv = dev->dev_private; - struct intel_encoder *encoder; - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - struct drm_display_mode *mode = &intel_crtc->config.requested_mode; - int pipe = intel_crtc->pipe; - int ret; - - drm_vblank_pre_modeset(dev, pipe); - - ret = dev_priv->display.crtc_mode_set(crtc, x, y, fb); - - drm_vblank_post_modeset(dev, pipe); - - if (ret != 0) - return ret; - - for_each_encoder_on_crtc(dev, crtc, encoder) { - DRM_DEBUG_KMS("[ENCODER:%d:%s] set [MODE:%d:%s]\n", - encoder->base.base.id, - drm_get_encoder_name(&encoder->base), - mode->base.id, mode->name); - encoder->mode_set(encoder); - } - - return 0; -} - static struct { int clock; u32 config; @@ -7374,8 +7667,6 @@ static void haswell_write_eld(struct drm_connector *connector, { struct drm_i915_private *dev_priv = connector->dev->dev_private; uint8_t *eld = connector->eld; - struct drm_device *dev = crtc->dev; - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); uint32_t eldv; uint32_t i; int len; @@ -7387,17 +7678,14 @@ static void haswell_write_eld(struct drm_connector *connector, int aud_config = HSW_AUD_CFG(pipe); int aud_cntrl_st2 = HSW_AUD_PIN_ELD_CP_VLD; - - DRM_DEBUG_DRIVER("HDMI: Haswell Audio initialize....\n"); - /* Audio output enable */ DRM_DEBUG_DRIVER("HDMI audio: enable codec\n"); tmp = I915_READ(aud_cntrl_st2); tmp |= (AUDIO_OUTPUT_ENABLE_A << (pipe * 4)); I915_WRITE(aud_cntrl_st2, tmp); + POSTING_READ(aud_cntrl_st2); - /* Wait for 1 vertical blank */ - intel_wait_for_vblank(dev, pipe); + assert_pipe_disabled(dev_priv, to_intel_crtc(crtc)->pipe); /* Set ELD valid state */ tmp = I915_READ(aud_cntrl_st2); @@ -7417,7 +7705,6 @@ static void haswell_write_eld(struct drm_connector *connector, DRM_DEBUG_DRIVER("ELD on pipe %c\n", pipe_name(pipe)); eldv = AUDIO_ELD_VALID_A << (pipe * 4); - intel_crtc->eld_vld = true; if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) { DRM_DEBUG_DRIVER("ELD: DisplayPort detected\n"); @@ -7564,9 +7851,9 @@ void intel_write_eld(struct drm_encoder *encoder, DRM_DEBUG_DRIVER("ELD on [CONNECTOR:%d:%s], [ENCODER:%d:%s]\n", connector->base.id, - drm_get_connector_name(connector), + connector->name, connector->encoder->base.id, - drm_get_encoder_name(connector->encoder)); + connector->encoder->name); connector->eld[6] = drm_av_sync_delay(connector, mode) / 2; @@ -7579,29 +7866,33 @@ static void i845_update_cursor(struct drm_crtc *crtc, u32 base) struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - bool visible = base != 0; - u32 cntl; + uint32_t cntl; - if (intel_crtc->cursor_visible == visible) - return; - - cntl = I915_READ(_CURACNTR); - if (visible) { + if (base != intel_crtc->cursor_base) { /* On these chipsets we can only modify the base whilst * the cursor is disabled. */ + if (intel_crtc->cursor_cntl) { + I915_WRITE(_CURACNTR, 0); + POSTING_READ(_CURACNTR); + intel_crtc->cursor_cntl = 0; + } + I915_WRITE(_CURABASE, base); + POSTING_READ(_CURABASE); + } - cntl &= ~(CURSOR_FORMAT_MASK); - /* XXX width must be 64, stride 256 => 0x00 << 28 */ - cntl |= CURSOR_ENABLE | + /* XXX width must be 64, stride 256 => 0x00 << 28 */ + cntl = 0; + if (base) + cntl = (CURSOR_ENABLE | CURSOR_GAMMA_ENABLE | - CURSOR_FORMAT_ARGB; - } else - cntl &= ~(CURSOR_ENABLE | CURSOR_GAMMA_ENABLE); - I915_WRITE(_CURACNTR, cntl); - - intel_crtc->cursor_visible = visible; + CURSOR_FORMAT_ARGB); + if (intel_crtc->cursor_cntl != cntl) { + I915_WRITE(_CURACNTR, cntl); + POSTING_READ(_CURACNTR); + intel_crtc->cursor_cntl = cntl; + } } static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base) @@ -7610,16 +7901,12 @@ static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base) struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; - bool visible = base != 0; + uint32_t cntl; - if (intel_crtc->cursor_visible != visible) { - int16_t width = intel_crtc->cursor_width; - uint32_t cntl = I915_READ(CURCNTR(pipe)); - if (base) { - cntl &= ~(CURSOR_MODE | MCURSOR_PIPE_SELECT); - cntl |= MCURSOR_GAMMA_ENABLE; - - switch (width) { + cntl = 0; + if (base) { + cntl = MCURSOR_GAMMA_ENABLE; + switch (intel_crtc->cursor_width) { case 64: cntl |= CURSOR_MODE_64_ARGB_AX; break; @@ -7632,18 +7919,16 @@ static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base) default: WARN_ON(1); return; - } - cntl |= pipe << 28; /* Connect to correct pipe */ - } else { - cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE); - cntl |= CURSOR_MODE_DISABLE; } + cntl |= pipe << 28; /* Connect to correct pipe */ + } + if (intel_crtc->cursor_cntl != cntl) { I915_WRITE(CURCNTR(pipe), cntl); - - intel_crtc->cursor_visible = visible; + POSTING_READ(CURCNTR(pipe)); + intel_crtc->cursor_cntl = cntl; } + /* and commit changes on next vblank */ - POSTING_READ(CURCNTR(pipe)); I915_WRITE(CURBASE(pipe), base); POSTING_READ(CURBASE(pipe)); } @@ -7654,15 +7939,12 @@ static void ivb_update_cursor(struct drm_crtc *crtc, u32 base) struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; - bool visible = base != 0; - - if (intel_crtc->cursor_visible != visible) { - int16_t width = intel_crtc->cursor_width; - uint32_t cntl = I915_READ(CURCNTR_IVB(pipe)); - if (base) { - cntl &= ~CURSOR_MODE; - cntl |= MCURSOR_GAMMA_ENABLE; - switch (width) { + uint32_t cntl; + + cntl = 0; + if (base) { + cntl = MCURSOR_GAMMA_ENABLE; + switch (intel_crtc->cursor_width) { case 64: cntl |= CURSOR_MODE_64_ARGB_AX; break; @@ -7675,23 +7957,20 @@ static void ivb_update_cursor(struct drm_crtc *crtc, u32 base) default: WARN_ON(1); return; - } - } else { - cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE); - cntl |= CURSOR_MODE_DISABLE; - } - if (IS_HASWELL(dev) || IS_BROADWELL(dev)) { - cntl |= CURSOR_PIPE_CSC_ENABLE; - cntl &= ~CURSOR_TRICKLE_FEED_DISABLE; } - I915_WRITE(CURCNTR_IVB(pipe), cntl); + } + if (IS_HASWELL(dev) || IS_BROADWELL(dev)) + cntl |= CURSOR_PIPE_CSC_ENABLE; - intel_crtc->cursor_visible = visible; + if (intel_crtc->cursor_cntl != cntl) { + I915_WRITE(CURCNTR(pipe), cntl); + POSTING_READ(CURCNTR(pipe)); + intel_crtc->cursor_cntl = cntl; } + /* and commit changes on next vblank */ - POSTING_READ(CURCNTR_IVB(pipe)); - I915_WRITE(CURBASE_IVB(pipe), base); - POSTING_READ(CURBASE_IVB(pipe)); + I915_WRITE(CURBASE(pipe), base); + POSTING_READ(CURBASE(pipe)); } /* If no-part of the cursor is visible on the framebuffer, then the GPU may hang... */ @@ -7705,7 +7984,6 @@ static void intel_crtc_update_cursor(struct drm_crtc *crtc, int x = intel_crtc->cursor_x; int y = intel_crtc->cursor_y; u32 base = 0, pos = 0; - bool visible; if (on) base = intel_crtc->cursor_addr; @@ -7734,20 +8012,18 @@ static void intel_crtc_update_cursor(struct drm_crtc *crtc, } pos |= y << CURSOR_Y_SHIFT; - visible = base != 0; - if (!visible && !intel_crtc->cursor_visible) + if (base == 0 && intel_crtc->cursor_base == 0) return; - if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev) || IS_BROADWELL(dev)) { - I915_WRITE(CURPOS_IVB(pipe), pos); + I915_WRITE(CURPOS(pipe), pos); + + if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev) || IS_BROADWELL(dev)) ivb_update_cursor(crtc, base); - } else { - I915_WRITE(CURPOS(pipe), pos); - if (IS_845G(dev) || IS_I865G(dev)) - i845_update_cursor(crtc, base); - else - i9xx_update_cursor(crtc, base); - } + else if (IS_845G(dev) || IS_I865G(dev)) + i845_update_cursor(crtc, base); + else + i9xx_update_cursor(crtc, base); + intel_crtc->cursor_base = base; } static int intel_crtc_cursor_set(struct drm_crtc *crtc, @@ -7825,14 +8101,12 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc, addr = i915_gem_obj_ggtt_offset(obj); } else { int align = IS_I830(dev) ? 16 * 1024 : 256; - ret = i915_gem_attach_phys_object(dev, obj, - (intel_crtc->pipe == 0) ? I915_GEM_PHYS_CURSOR_0 : I915_GEM_PHYS_CURSOR_1, - align); + ret = i915_gem_object_attach_phys(obj, align); if (ret) { DRM_DEBUG_KMS("failed to attach phys object\n"); goto fail_locked; } - addr = obj->phys_obj->handle->busaddr; + addr = obj->phys_handle->busaddr; } if (IS_GEN2(dev)) @@ -7840,10 +8114,7 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc, finish: if (intel_crtc->cursor_bo) { - if (INTEL_INFO(dev)->cursor_needs_physical) { - if (intel_crtc->cursor_bo != obj) - i915_gem_detach_phys_object(dev, intel_crtc->cursor_bo); - } else + if (!INTEL_INFO(dev)->cursor_needs_physical) i915_gem_object_unpin_from_display_plane(intel_crtc->cursor_bo); drm_gem_object_unreference(&intel_crtc->cursor_bo->base); } @@ -8020,7 +8291,8 @@ mode_fits_in_fbdev(struct drm_device *dev, bool intel_get_load_detect_pipe(struct drm_connector *connector, struct drm_display_mode *mode, - struct intel_load_detect_pipe *old) + struct intel_load_detect_pipe *old, + struct drm_modeset_acquire_ctx *ctx) { struct intel_crtc *intel_crtc; struct intel_encoder *intel_encoder = @@ -8030,11 +8302,19 @@ bool intel_get_load_detect_pipe(struct drm_connector *connector, struct drm_crtc *crtc = NULL; struct drm_device *dev = encoder->dev; struct drm_framebuffer *fb; - int i = -1; + struct drm_mode_config *config = &dev->mode_config; + int ret, i = -1; DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n", - connector->base.id, drm_get_connector_name(connector), - encoder->base.id, drm_get_encoder_name(encoder)); + connector->base.id, connector->name, + encoder->base.id, encoder->name); + + drm_modeset_acquire_init(ctx, 0); + +retry: + ret = drm_modeset_lock(&config->connection_mutex, ctx); + if (ret) + goto fail_unlock; /* * Algorithm gets a little messy: @@ -8050,7 +8330,9 @@ bool intel_get_load_detect_pipe(struct drm_connector *connector, if (encoder->crtc) { crtc = encoder->crtc; - mutex_lock(&crtc->mutex); + ret = drm_modeset_lock(&crtc->mutex, ctx); + if (ret) + goto fail_unlock; old->dpms_mode = connector->dpms; old->load_detect_temp = false; @@ -8063,7 +8345,7 @@ bool intel_get_load_detect_pipe(struct drm_connector *connector, } /* Find an unused one (if possible) */ - list_for_each_entry(possible_crtc, &dev->mode_config.crtc_list, head) { + for_each_crtc(dev, possible_crtc) { i++; if (!(encoder->possible_crtcs & (1 << i))) continue; @@ -8078,10 +8360,12 @@ bool intel_get_load_detect_pipe(struct drm_connector *connector, */ if (!crtc) { DRM_DEBUG_KMS("no pipe available for load-detect\n"); - return false; + goto fail_unlock; } - mutex_lock(&crtc->mutex); + ret = drm_modeset_lock(&crtc->mutex, ctx); + if (ret) + goto fail_unlock; intel_encoder->new_crtc = to_intel_crtc(crtc); to_intel_connector(connector)->new_encoder = intel_encoder; @@ -8131,12 +8415,21 @@ bool intel_get_load_detect_pipe(struct drm_connector *connector, intel_crtc->new_config = &intel_crtc->config; else intel_crtc->new_config = NULL; - mutex_unlock(&crtc->mutex); +fail_unlock: + if (ret == -EDEADLK) { + drm_modeset_backoff(ctx); + goto retry; + } + + drm_modeset_drop_locks(ctx); + drm_modeset_acquire_fini(ctx); + return false; } void intel_release_load_detect_pipe(struct drm_connector *connector, - struct intel_load_detect_pipe *old) + struct intel_load_detect_pipe *old, + struct drm_modeset_acquire_ctx *ctx) { struct intel_encoder *intel_encoder = intel_attached_encoder(connector); @@ -8145,8 +8438,8 @@ void intel_release_load_detect_pipe(struct drm_connector *connector, struct intel_crtc *intel_crtc = to_intel_crtc(crtc); DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n", - connector->base.id, drm_get_connector_name(connector), - encoder->base.id, drm_get_encoder_name(encoder)); + connector->base.id, connector->name, + encoder->base.id, encoder->name); if (old->load_detect_temp) { to_intel_connector(connector)->new_encoder = NULL; @@ -8160,7 +8453,7 @@ void intel_release_load_detect_pipe(struct drm_connector *connector, drm_framebuffer_unreference(old->release_fb); } - mutex_unlock(&crtc->mutex); + goto unlock; return; } @@ -8168,7 +8461,9 @@ void intel_release_load_detect_pipe(struct drm_connector *connector, if (old->dpms_mode != DRM_MODE_DPMS_ON) connector->funcs->dpms(connector, old->dpms_mode); - mutex_unlock(&crtc->mutex); +unlock: + drm_modeset_drop_locks(ctx); + drm_modeset_acquire_fini(ctx); } static int i9xx_pll_refclk(struct drm_device *dev, @@ -8454,7 +8749,7 @@ void intel_mark_idle(struct drm_device *dev) if (!i915.powersave) goto out; - list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + for_each_crtc(dev, crtc) { if (!crtc->primary->fb) continue; @@ -8469,7 +8764,7 @@ out: } void intel_mark_fb_busy(struct drm_i915_gem_object *obj, - struct intel_ring_buffer *ring) + struct intel_engine_cs *ring) { struct drm_device *dev = obj->base.dev; struct drm_crtc *crtc; @@ -8477,7 +8772,7 @@ void intel_mark_fb_busy(struct drm_i915_gem_object *obj, if (!i915.powersave) return; - list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + for_each_crtc(dev, crtc) { if (!crtc->primary->fb) continue; @@ -8565,7 +8860,7 @@ static void do_intel_finish_page_flip(struct drm_device *dev, if (work->event) drm_send_vblank_event(dev, intel_crtc->pipe, work->event); - drm_vblank_put(dev, intel_crtc->pipe); + drm_crtc_vblank_put(crtc); spin_unlock_irqrestore(&dev->event_lock, flags); @@ -8592,6 +8887,48 @@ void intel_finish_page_flip_plane(struct drm_device *dev, int plane) do_intel_finish_page_flip(dev, crtc); } +/* Is 'a' after or equal to 'b'? */ +static bool g4x_flip_count_after_eq(u32 a, u32 b) +{ + return !((a - b) & 0x80000000); +} + +static bool page_flip_finished(struct intel_crtc *crtc) +{ + struct drm_device *dev = crtc->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + + /* + * The relevant registers doen't exist on pre-ctg. + * As the flip done interrupt doesn't trigger for mmio + * flips on gmch platforms, a flip count check isn't + * really needed there. But since ctg has the registers, + * include it in the check anyway. + */ + if (INTEL_INFO(dev)->gen < 5 && !IS_G4X(dev)) + return true; + + /* + * A DSPSURFLIVE check isn't enough in case the mmio and CS flips + * used the same base address. In that case the mmio flip might + * have completed, but the CS hasn't even executed the flip yet. + * + * A flip count check isn't enough as the CS might have updated + * the base address just after start of vblank, but before we + * managed to process the interrupt. This means we'd complete the + * CS flip too soon. + * + * Combining both checks should get us a good enough result. It may + * still happen that the CS flip has been executed, but has not + * yet actually completed. But in case the base address is the same + * anyway, we don't really care. + */ + return (I915_READ(DSPSURFLIVE(crtc->plane)) & ~0xfff) == + crtc->unpin_work->gtt_offset && + g4x_flip_count_after_eq(I915_READ(PIPE_FLIPCOUNT_GM45(crtc->pipe)), + crtc->unpin_work->flip_count); +} + void intel_prepare_page_flip(struct drm_device *dev, int plane) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -8604,12 +8941,12 @@ void intel_prepare_page_flip(struct drm_device *dev, int plane) * is also accompanied by a spurious intel_prepare_page_flip(). */ spin_lock_irqsave(&dev->event_lock, flags); - if (intel_crtc->unpin_work) + if (intel_crtc->unpin_work && page_flip_finished(intel_crtc)) atomic_inc_not_zero(&intel_crtc->unpin_work->pending); spin_unlock_irqrestore(&dev->event_lock, flags); } -inline static void intel_mark_page_flip_active(struct intel_crtc *intel_crtc) +static inline void intel_mark_page_flip_active(struct intel_crtc *intel_crtc) { /* Ensure that the work item is consistent when activating it ... */ smp_wmb(); @@ -8622,21 +8959,16 @@ static int intel_gen2_queue_flip(struct drm_device *dev, struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_i915_gem_object *obj, + struct intel_engine_cs *ring, uint32_t flags) { - struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); u32 flip_mask; - struct intel_ring_buffer *ring = &dev_priv->ring[RCS]; int ret; - ret = intel_pin_and_fence_fb_obj(dev, obj, ring); - if (ret) - goto err; - ret = intel_ring_begin(ring, 6); if (ret) - goto err_unpin; + return ret; /* Can't queue multiple flips, so wait for the previous * one to finish before executing the next. @@ -8650,38 +8982,28 @@ static int intel_gen2_queue_flip(struct drm_device *dev, intel_ring_emit(ring, MI_DISPLAY_FLIP | MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); intel_ring_emit(ring, fb->pitches[0]); - intel_ring_emit(ring, i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset); + intel_ring_emit(ring, intel_crtc->unpin_work->gtt_offset); intel_ring_emit(ring, 0); /* aux display base address, unused */ intel_mark_page_flip_active(intel_crtc); __intel_ring_advance(ring); return 0; - -err_unpin: - intel_unpin_fb_obj(obj); -err: - return ret; } static int intel_gen3_queue_flip(struct drm_device *dev, struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_i915_gem_object *obj, + struct intel_engine_cs *ring, uint32_t flags) { - struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); u32 flip_mask; - struct intel_ring_buffer *ring = &dev_priv->ring[RCS]; int ret; - ret = intel_pin_and_fence_fb_obj(dev, obj, ring); - if (ret) - goto err; - ret = intel_ring_begin(ring, 6); if (ret) - goto err_unpin; + return ret; if (intel_crtc->plane) flip_mask = MI_WAIT_FOR_PLANE_B_FLIP; @@ -8692,38 +9014,29 @@ static int intel_gen3_queue_flip(struct drm_device *dev, intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); intel_ring_emit(ring, fb->pitches[0]); - intel_ring_emit(ring, i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset); + intel_ring_emit(ring, intel_crtc->unpin_work->gtt_offset); intel_ring_emit(ring, MI_NOOP); intel_mark_page_flip_active(intel_crtc); __intel_ring_advance(ring); return 0; - -err_unpin: - intel_unpin_fb_obj(obj); -err: - return ret; } static int intel_gen4_queue_flip(struct drm_device *dev, struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_i915_gem_object *obj, + struct intel_engine_cs *ring, uint32_t flags) { struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); uint32_t pf, pipesrc; - struct intel_ring_buffer *ring = &dev_priv->ring[RCS]; int ret; - ret = intel_pin_and_fence_fb_obj(dev, obj, ring); - if (ret) - goto err; - ret = intel_ring_begin(ring, 4); if (ret) - goto err_unpin; + return ret; /* i965+ uses the linear or tiled offsets from the * Display Registers (which do not change across a page-flip) @@ -8732,8 +9045,7 @@ static int intel_gen4_queue_flip(struct drm_device *dev, intel_ring_emit(ring, MI_DISPLAY_FLIP | MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); intel_ring_emit(ring, fb->pitches[0]); - intel_ring_emit(ring, - (i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset) | + intel_ring_emit(ring, intel_crtc->unpin_work->gtt_offset | obj->tiling_mode); /* XXX Enabling the panel-fitter across page-flip is so far @@ -8747,37 +9059,28 @@ static int intel_gen4_queue_flip(struct drm_device *dev, intel_mark_page_flip_active(intel_crtc); __intel_ring_advance(ring); return 0; - -err_unpin: - intel_unpin_fb_obj(obj); -err: - return ret; } static int intel_gen6_queue_flip(struct drm_device *dev, struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_i915_gem_object *obj, + struct intel_engine_cs *ring, uint32_t flags) { struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - struct intel_ring_buffer *ring = &dev_priv->ring[RCS]; uint32_t pf, pipesrc; int ret; - ret = intel_pin_and_fence_fb_obj(dev, obj, ring); - if (ret) - goto err; - ret = intel_ring_begin(ring, 4); if (ret) - goto err_unpin; + return ret; intel_ring_emit(ring, MI_DISPLAY_FLIP | MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); intel_ring_emit(ring, fb->pitches[0] | obj->tiling_mode); - intel_ring_emit(ring, i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset); + intel_ring_emit(ring, intel_crtc->unpin_work->gtt_offset); /* Contrary to the suggestions in the documentation, * "Enable Panel Fitter" does not seem to be required when page @@ -8792,34 +9095,20 @@ static int intel_gen6_queue_flip(struct drm_device *dev, intel_mark_page_flip_active(intel_crtc); __intel_ring_advance(ring); return 0; - -err_unpin: - intel_unpin_fb_obj(obj); -err: - return ret; } static int intel_gen7_queue_flip(struct drm_device *dev, struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_i915_gem_object *obj, + struct intel_engine_cs *ring, uint32_t flags) { - struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - struct intel_ring_buffer *ring; uint32_t plane_bit = 0; int len, ret; - ring = obj->ring; - if (IS_VALLEYVIEW(dev) || ring == NULL || ring->id != RCS) - ring = &dev_priv->ring[BCS]; - - ret = intel_pin_and_fence_fb_obj(dev, obj, ring); - if (ret) - goto err; - - switch(intel_crtc->plane) { + switch (intel_crtc->plane) { case PLANE_A: plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_A; break; @@ -8831,13 +9120,20 @@ static int intel_gen7_queue_flip(struct drm_device *dev, break; default: WARN_ONCE(1, "unknown plane in flip command\n"); - ret = -ENODEV; - goto err_unpin; + return -ENODEV; } len = 4; - if (ring->id == RCS) + if (ring->id == RCS) { len += 6; + /* + * On Gen 8, SRM is now taking an extra dword to accommodate + * 48bits addresses, and we need a NOOP for the batch size to + * stay even. + */ + if (IS_GEN8(dev)) + len += 2; + } /* * BSpec MI_DISPLAY_FLIP for IVB: @@ -8851,11 +9147,11 @@ static int intel_gen7_queue_flip(struct drm_device *dev, */ ret = intel_ring_cacheline_align(ring); if (ret) - goto err_unpin; + return ret; ret = intel_ring_begin(ring, len); if (ret) - goto err_unpin; + return ret; /* Unmask the flip-done completion message. Note that the bspec says that * we should do this for both the BCS and RCS, and that we must not unmask @@ -8872,31 +9168,35 @@ static int intel_gen7_queue_flip(struct drm_device *dev, intel_ring_emit(ring, ~(DERRMR_PIPEA_PRI_FLIP_DONE | DERRMR_PIPEB_PRI_FLIP_DONE | DERRMR_PIPEC_PRI_FLIP_DONE)); - intel_ring_emit(ring, MI_STORE_REGISTER_MEM(1) | - MI_SRM_LRM_GLOBAL_GTT); + if (IS_GEN8(dev)) + intel_ring_emit(ring, MI_STORE_REGISTER_MEM_GEN8(1) | + MI_SRM_LRM_GLOBAL_GTT); + else + intel_ring_emit(ring, MI_STORE_REGISTER_MEM(1) | + MI_SRM_LRM_GLOBAL_GTT); intel_ring_emit(ring, DERRMR); intel_ring_emit(ring, ring->scratch.gtt_offset + 256); + if (IS_GEN8(dev)) { + intel_ring_emit(ring, 0); + intel_ring_emit(ring, MI_NOOP); + } } intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | plane_bit); intel_ring_emit(ring, (fb->pitches[0] | obj->tiling_mode)); - intel_ring_emit(ring, i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset); + intel_ring_emit(ring, intel_crtc->unpin_work->gtt_offset); intel_ring_emit(ring, (MI_NOOP)); intel_mark_page_flip_active(intel_crtc); __intel_ring_advance(ring); return 0; - -err_unpin: - intel_unpin_fb_obj(obj); -err: - return ret; } static int intel_default_queue_flip(struct drm_device *dev, struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_i915_gem_object *obj, + struct intel_engine_cs *ring, uint32_t flags) { return -ENODEV; @@ -8913,6 +9213,7 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, struct drm_i915_gem_object *obj = to_intel_framebuffer(fb)->obj; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct intel_unpin_work *work; + struct intel_engine_cs *ring; unsigned long flags; int ret; @@ -8941,7 +9242,7 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, work->old_fb_obj = to_intel_framebuffer(old_fb)->obj; INIT_WORK(&work->work, intel_unpin_work_fn); - ret = drm_vblank_get(dev, intel_crtc->pipe); + ret = drm_crtc_vblank_get(crtc); if (ret) goto free_work; @@ -8950,7 +9251,7 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, if (intel_crtc->unpin_work) { spin_unlock_irqrestore(&dev->event_lock, flags); kfree(work); - drm_vblank_put(dev, intel_crtc->pipe); + drm_crtc_vblank_put(crtc); DRM_DEBUG_DRIVER("flip queue: crtc already busy\n"); return -EBUSY; @@ -8978,10 +9279,30 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, atomic_inc(&intel_crtc->unpin_work_count); intel_crtc->reset_counter = atomic_read(&dev_priv->gpu_error.reset_counter); - ret = dev_priv->display.queue_flip(dev, crtc, fb, obj, page_flip_flags); + if (INTEL_INFO(dev)->gen >= 5 || IS_G4X(dev)) + work->flip_count = I915_READ(PIPE_FLIPCOUNT_GM45(intel_crtc->pipe)) + 1; + + if (IS_VALLEYVIEW(dev)) { + ring = &dev_priv->ring[BCS]; + } else if (INTEL_INFO(dev)->gen >= 7) { + ring = obj->ring; + if (ring == NULL || ring->id != RCS) + ring = &dev_priv->ring[BCS]; + } else { + ring = &dev_priv->ring[RCS]; + } + + ret = intel_pin_and_fence_fb_obj(dev, obj, ring); if (ret) goto cleanup_pending; + work->gtt_offset = + i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset; + + ret = dev_priv->display.queue_flip(dev, crtc, fb, obj, ring, page_flip_flags); + if (ret) + goto cleanup_unpin; + intel_disable_fbc(dev); intel_mark_fb_busy(obj, NULL); mutex_unlock(&dev->struct_mutex); @@ -8990,6 +9311,8 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, return 0; +cleanup_unpin: + intel_unpin_fb_obj(obj); cleanup_pending: atomic_dec(&intel_crtc->unpin_work_count); crtc->primary->fb = old_fb; @@ -9002,7 +9325,7 @@ cleanup: intel_crtc->unpin_work = NULL; spin_unlock_irqrestore(&dev->event_lock, flags); - drm_vblank_put(dev, intel_crtc->pipe); + drm_crtc_vblank_put(crtc); free_work: kfree(work); @@ -9045,8 +9368,7 @@ static void intel_modeset_update_staged_output_state(struct drm_device *dev) to_intel_crtc(encoder->base.crtc); } - list_for_each_entry(crtc, &dev->mode_config.crtc_list, - base.head) { + for_each_intel_crtc(dev, crtc) { crtc->new_enabled = crtc->base.enabled; if (crtc->new_enabled) @@ -9077,21 +9399,20 @@ static void intel_modeset_commit_output_state(struct drm_device *dev) encoder->base.crtc = &encoder->new_crtc->base; } - list_for_each_entry(crtc, &dev->mode_config.crtc_list, - base.head) { + for_each_intel_crtc(dev, crtc) { crtc->base.enabled = crtc->new_enabled; } } static void -connected_sink_compute_bpp(struct intel_connector * connector, +connected_sink_compute_bpp(struct intel_connector *connector, struct intel_crtc_config *pipe_config) { int bpp = pipe_config->pipe_bpp; DRM_DEBUG_KMS("[CONNECTOR:%d:%s] checking for sink bpp constrains\n", connector->base.base.id, - drm_get_connector_name(&connector->base)); + connector->base.name); /* Don't use an invalid EDID bpc value */ if (connector->base.display_info.bpc && @@ -9432,8 +9753,7 @@ intel_modeset_affected_pipes(struct drm_crtc *crtc, unsigned *modeset_pipes, } /* Check for pipes that will be enabled/disabled ... */ - list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list, - base.head) { + for_each_intel_crtc(dev, intel_crtc) { if (intel_crtc->base.enabled == intel_crtc->new_enabled) continue; @@ -9506,8 +9826,7 @@ intel_modeset_update_state(struct drm_device *dev, unsigned prepare_pipes) intel_modeset_commit_output_state(dev); /* Double check state. */ - list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list, - base.head) { + for_each_intel_crtc(dev, intel_crtc) { WARN_ON(intel_crtc->base.enabled != intel_crtc_in_use(&intel_crtc->base)); WARN_ON(intel_crtc->new_config && intel_crtc->new_config != &intel_crtc->config); @@ -9636,6 +9955,12 @@ intel_pipe_config_compare(struct drm_device *dev, PIPE_CONF_CHECK_I(adjusted_mode.crtc_vsync_end); PIPE_CONF_CHECK_I(pixel_multiplier); + PIPE_CONF_CHECK_I(has_hdmi_sink); + if ((INTEL_INFO(dev)->gen < 8 && !IS_HASWELL(dev)) || + IS_VALLEYVIEW(dev)) + PIPE_CONF_CHECK_I(limited_color_range); + + PIPE_CONF_CHECK_I(has_audio); PIPE_CONF_CHECK_FLAGS(adjusted_mode.flags, DRM_MODE_FLAG_INTERLACE); @@ -9654,11 +9979,22 @@ intel_pipe_config_compare(struct drm_device *dev, PIPE_CONF_CHECK_I(pipe_src_w); PIPE_CONF_CHECK_I(pipe_src_h); - PIPE_CONF_CHECK_I(gmch_pfit.control); - /* pfit ratios are autocomputed by the hw on gen4+ */ - if (INTEL_INFO(dev)->gen < 4) - PIPE_CONF_CHECK_I(gmch_pfit.pgm_ratios); - PIPE_CONF_CHECK_I(gmch_pfit.lvds_border_bits); + /* + * FIXME: BIOS likes to set up a cloned config with lvds+external + * screen. Since we don't yet re-compute the pipe config when moving + * just the lvds port away to another pipe the sw tracking won't match. + * + * Proper atomic modesets with recomputed global state will fix this. + * Until then just don't check gmch state for inherited modes. + */ + if (!PIPE_CONF_QUIRK(PIPE_CONFIG_QUIRK_INHERITED_MODE)) { + PIPE_CONF_CHECK_I(gmch_pfit.control); + /* pfit ratios are autocomputed by the hw on gen4+ */ + if (INTEL_INFO(dev)->gen < 4) + PIPE_CONF_CHECK_I(gmch_pfit.pgm_ratios); + PIPE_CONF_CHECK_I(gmch_pfit.lvds_border_bits); + } + PIPE_CONF_CHECK_I(pch_pfit.enabled); if (current_config->pch_pfit.enabled) { PIPE_CONF_CHECK_I(pch_pfit.pos); @@ -9722,7 +10058,7 @@ check_encoder_state(struct drm_device *dev) DRM_DEBUG_KMS("[ENCODER:%d:%s]\n", encoder->base.base.id, - drm_get_encoder_name(&encoder->base)); + encoder->base.name); WARN(&encoder->new_crtc->base != encoder->base.crtc, "encoder's stage crtc doesn't match current crtc\n"); @@ -9774,8 +10110,7 @@ check_crtc_state(struct drm_device *dev) struct intel_encoder *encoder; struct intel_crtc_config pipe_config; - list_for_each_entry(crtc, &dev->mode_config.crtc_list, - base.head) { + for_each_intel_crtc(dev, crtc) { bool enabled = false; bool active = false; @@ -9864,8 +10199,7 @@ check_shared_dpll_state(struct drm_device *dev) "pll on state mismatch (expected %i, found %i)\n", pll->on, active); - list_for_each_entry(crtc, &dev->mode_config.crtc_list, - base.head) { + for_each_intel_crtc(dev, crtc) { if (crtc->base.enabled && intel_crtc_to_shared_dpll(crtc) == pll) enabled_crtcs++; if (crtc->active && intel_crtc_to_shared_dpll(crtc) == pll) @@ -9905,6 +10239,44 @@ void ironlake_check_encoder_dotclock(const struct intel_crtc_config *pipe_config pipe_config->adjusted_mode.crtc_clock, dotclock); } +static void update_scanline_offset(struct intel_crtc *crtc) +{ + struct drm_device *dev = crtc->base.dev; + + /* + * The scanline counter increments at the leading edge of hsync. + * + * On most platforms it starts counting from vtotal-1 on the + * first active line. That means the scanline counter value is + * always one less than what we would expect. Ie. just after + * start of vblank, which also occurs at start of hsync (on the + * last active line), the scanline counter will read vblank_start-1. + * + * On gen2 the scanline counter starts counting from 1 instead + * of vtotal-1, so we have to subtract one (or rather add vtotal-1 + * to keep the value positive), instead of adding one. + * + * On HSW+ the behaviour of the scanline counter depends on the output + * type. For DP ports it behaves like most other platforms, but on HDMI + * there's an extra 1 line difference. So we need to add two instead of + * one to the value. + */ + if (IS_GEN2(dev)) { + const struct drm_display_mode *mode = &crtc->config.adjusted_mode; + int vtotal; + + vtotal = mode->crtc_vtotal; + if (mode->flags & DRM_MODE_FLAG_INTERLACE) + vtotal /= 2; + + crtc->scanline_offset = vtotal - 1; + } else if (HAS_DDI(dev) && + intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_HDMI)) { + crtc->scanline_offset = 2; + } else + crtc->scanline_offset = 1; +} + static int __intel_set_mode(struct drm_crtc *crtc, struct drm_display_mode *mode, int x, int y, struct drm_framebuffer *fb) @@ -9996,15 +10368,38 @@ static int __intel_set_mode(struct drm_crtc *crtc, * on the DPLL. */ for_each_intel_crtc_masked(dev, modeset_pipes, intel_crtc) { - ret = intel_crtc_mode_set(&intel_crtc->base, - x, y, fb); + struct drm_framebuffer *old_fb; + + mutex_lock(&dev->struct_mutex); + ret = intel_pin_and_fence_fb_obj(dev, + to_intel_framebuffer(fb)->obj, + NULL); + if (ret != 0) { + DRM_ERROR("pin & fence failed\n"); + mutex_unlock(&dev->struct_mutex); + goto done; + } + old_fb = crtc->primary->fb; + if (old_fb) + intel_unpin_fb_obj(to_intel_framebuffer(old_fb)->obj); + mutex_unlock(&dev->struct_mutex); + + crtc->primary->fb = fb; + crtc->x = x; + crtc->y = y; + + ret = dev_priv->display.crtc_mode_set(&intel_crtc->base, + x, y, fb); if (ret) goto done; } /* Now enable the clocks, plane, pipe, and connectors that we set up. */ - for_each_intel_crtc_masked(dev, prepare_pipes, intel_crtc) + for_each_intel_crtc_masked(dev, prepare_pipes, intel_crtc) { + update_scanline_offset(intel_crtc); + dev_priv->display.crtc_enable(&intel_crtc->base); + } /* FIXME: add subpixel order */ done: @@ -10080,7 +10475,7 @@ static int intel_set_config_save_state(struct drm_device *dev, * restored, not the drivers personal bookkeeping. */ count = 0; - list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + for_each_crtc(dev, crtc) { config->save_crtc_enabled[count++] = crtc->enabled; } @@ -10106,7 +10501,7 @@ static void intel_set_config_restore_state(struct drm_device *dev, int count; count = 0; - list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) { + for_each_intel_crtc(dev, crtc) { crtc->new_enabled = config->save_crtc_enabled[count++]; if (crtc->new_enabled) @@ -10230,7 +10625,7 @@ intel_modeset_stage_output_state(struct drm_device *dev, DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [NOCRTC]\n", connector->base.base.id, - drm_get_connector_name(&connector->base)); + connector->base.name); } @@ -10265,7 +10660,7 @@ intel_modeset_stage_output_state(struct drm_device *dev, DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [CRTC:%d]\n", connector->base.base.id, - drm_get_connector_name(&connector->base), + connector->base.name, new_crtc->base.id); } @@ -10296,8 +10691,7 @@ intel_modeset_stage_output_state(struct drm_device *dev, } /* Now we've also updated encoder->new_crtc for all encoders. */ - list_for_each_entry(crtc, &dev->mode_config.crtc_list, - base.head) { + for_each_intel_crtc(dev, crtc) { crtc->new_enabled = false; list_for_each_entry(encoder, @@ -10510,7 +10904,7 @@ static void ibx_pch_dpll_disable(struct drm_i915_private *dev_priv, struct intel_crtc *crtc; /* Make sure no transcoder isn't still depending on us. */ - list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) { + for_each_intel_crtc(dev, crtc) { if (intel_crtc_to_shared_dpll(crtc) == pll) assert_pch_transcoder_disabled(dev_priv, crtc->pipe); } @@ -10567,16 +10961,6 @@ static void intel_crtc_init(struct drm_device *dev, int pipe) drm_crtc_init(dev, &intel_crtc->base, &intel_crtc_funcs); - if (IS_GEN2(dev)) { - intel_crtc->max_cursor_width = GEN2_CURSOR_WIDTH; - intel_crtc->max_cursor_height = GEN2_CURSOR_HEIGHT; - } else { - intel_crtc->max_cursor_width = CURSOR_WIDTH; - intel_crtc->max_cursor_height = CURSOR_HEIGHT; - } - dev->mode_config.cursor_width = intel_crtc->max_cursor_width; - dev->mode_config.cursor_height = intel_crtc->max_cursor_height; - drm_mode_crtc_set_gamma_size(&intel_crtc->base, 256); for (i = 0; i < 256; i++) { intel_crtc->lut_r[i] = i; @@ -10595,19 +10979,27 @@ static void intel_crtc_init(struct drm_device *dev, int pipe) intel_crtc->plane = !pipe; } + intel_crtc->cursor_base = ~0; + intel_crtc->cursor_cntl = ~0; + + init_waitqueue_head(&intel_crtc->vbl_wait); + BUG_ON(pipe >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) || dev_priv->plane_to_crtc_mapping[intel_crtc->plane] != NULL); dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base; dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base; drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs); + + WARN_ON(drm_crtc_index(&intel_crtc->base) != intel_crtc->pipe); } enum pipe intel_get_pipe_from_connector(struct intel_connector *connector) { struct drm_encoder *encoder = connector->base.encoder; + struct drm_device *dev = connector->base.dev; - WARN_ON(!mutex_is_locked(&connector->base.dev->mode_config.mutex)); + WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex)); if (!encoder) return INVALID_PIPE; @@ -10703,7 +11095,7 @@ static void intel_setup_outputs(struct drm_device *dev) intel_lvds_init(dev); - if (!IS_ULT(dev)) + if (!IS_ULT(dev) && !IS_CHERRYVIEW(dev) && dev_priv->vbt.int_crt_support) intel_crt_init(dev); if (HAS_DDI(dev)) { @@ -10767,6 +11159,15 @@ static void intel_setup_outputs(struct drm_device *dev) intel_dp_init(dev, VLV_DISPLAY_BASE + DP_C, PORT_C); } + if (IS_CHERRYVIEW(dev)) { + if (I915_READ(VLV_DISPLAY_BASE + CHV_HDMID) & SDVO_DETECTED) { + intel_hdmi_init(dev, VLV_DISPLAY_BASE + CHV_HDMID, + PORT_D); + if (I915_READ(VLV_DISPLAY_BASE + DP_D) & DP_DETECTED) + intel_dp_init(dev, VLV_DISPLAY_BASE + DP_D, PORT_D); + } + } + intel_dsi_init(dev); } else if (SUPPORTS_DIGITAL_OUTPUTS(dev)) { bool found = false; @@ -10996,6 +11397,8 @@ static void intel_init_display(struct drm_device *dev) if (HAS_PCH_SPLIT(dev) || IS_G4X(dev)) dev_priv->display.find_dpll = g4x_find_best_dpll; + else if (IS_CHERRYVIEW(dev)) + dev_priv->display.find_dpll = chv_find_best_dpll; else if (IS_VALLEYVIEW(dev)) dev_priv->display.find_dpll = vlv_find_best_dpll; else if (IS_PINEVIEW(dev)) @@ -11077,6 +11480,8 @@ static void intel_init_display(struct drm_device *dev) } else if (IS_GEN6(dev)) { dev_priv->display.fdi_link_train = gen6_fdi_link_train; dev_priv->display.write_eld = ironlake_write_eld; + dev_priv->display.modeset_global_resources = + snb_modeset_global_resources; } else if (IS_IVYBRIDGE(dev)) { /* FIXME: detect B0+ stepping and use auto training */ dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train; @@ -11205,9 +11610,6 @@ static struct intel_quirk intel_quirks[] = { /* ThinkPad T60 needs pipe A force quirk (bug #16494) */ { 0x2782, 0x17aa, 0x201a, quirk_pipea_force }, - /* 830 needs to leave pipe A & dpll A up */ - { 0x3577, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force }, - /* Lenovo U160 cannot use SSC on LVDS */ { 0x0046, 0x17aa, 0x3920, quirk_ssc_force_disable }, @@ -11281,9 +11683,7 @@ void intel_modeset_init_hw(struct drm_device *dev) intel_reset_dpio(dev); - mutex_lock(&dev->struct_mutex); intel_enable_gt_powersave(dev); - mutex_unlock(&dev->struct_mutex); } void intel_modeset_suspend_hw(struct drm_device *dev) @@ -11327,6 +11727,15 @@ void intel_modeset_init(struct drm_device *dev) dev->mode_config.max_width = 8192; dev->mode_config.max_height = 8192; } + + if (IS_GEN2(dev)) { + dev->mode_config.cursor_width = GEN2_CURSOR_WIDTH; + dev->mode_config.cursor_height = GEN2_CURSOR_HEIGHT; + } else { + dev->mode_config.cursor_width = MAX_CURSOR_WIDTH; + dev->mode_config.cursor_height = MAX_CURSOR_HEIGHT; + } + dev->mode_config.fb_base = dev_priv->gtt.mappable_base; DRM_DEBUG_KMS("%d display pipe%s available.\n", @@ -11356,12 +11765,11 @@ void intel_modeset_init(struct drm_device *dev) /* Just in case the BIOS is doing something questionable. */ intel_disable_fbc(dev); - mutex_lock(&dev->mode_config.mutex); + drm_modeset_lock_all(dev); intel_modeset_setup_hw_state(dev, false); - mutex_unlock(&dev->mode_config.mutex); + drm_modeset_unlock_all(dev); - list_for_each_entry(crtc, &dev->mode_config.crtc_list, - base.head) { + for_each_intel_crtc(dev, crtc) { if (!crtc->active) continue; @@ -11384,20 +11792,12 @@ void intel_modeset_init(struct drm_device *dev) } } -static void -intel_connector_break_all_links(struct intel_connector *connector) -{ - connector->base.dpms = DRM_MODE_DPMS_OFF; - connector->base.encoder = NULL; - connector->encoder->connectors_active = false; - connector->encoder->base.crtc = NULL; -} - static void intel_enable_pipe_a(struct drm_device *dev) { struct intel_connector *connector; struct drm_connector *crt = NULL; struct intel_load_detect_pipe load_detect_temp; + struct drm_modeset_acquire_ctx ctx; /* We can't just switch on the pipe A, we need to set things up with a * proper mode and output configuration. As a gross hack, enable pipe A @@ -11414,8 +11814,8 @@ static void intel_enable_pipe_a(struct drm_device *dev) if (!crt) return; - if (intel_get_load_detect_pipe(crt, NULL, &load_detect_temp)) - intel_release_load_detect_pipe(crt, &load_detect_temp); + if (intel_get_load_detect_pipe(crt, NULL, &load_detect_temp, &ctx)) + intel_release_load_detect_pipe(crt, &load_detect_temp, &ctx); } @@ -11450,6 +11850,12 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc) reg = PIPECONF(crtc->config.cpu_transcoder); I915_WRITE(reg, I915_READ(reg) & ~PIPECONF_FRAME_START_DELAY_MASK); + /* restore vblank interrupts to correct state */ + if (crtc->active) + drm_vblank_on(dev, crtc->pipe); + else + drm_vblank_off(dev, crtc->pipe); + /* We need to sanitize the plane -> pipe mapping first because this will * disable the crtc (and hence change the state) if it is wrong. Note * that gen4+ has a fixed plane -> pipe mapping. */ @@ -11474,8 +11880,17 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc) if (connector->encoder->base.crtc != &crtc->base) continue; - intel_connector_break_all_links(connector); + connector->base.dpms = DRM_MODE_DPMS_OFF; + connector->base.encoder = NULL; } + /* multiple connectors may have the same encoder: + * handle them and break crtc link separately */ + list_for_each_entry(connector, &dev->mode_config.connector_list, + base.head) + if (connector->encoder->base.crtc == &crtc->base) { + connector->encoder->base.crtc = NULL; + connector->encoder->connectors_active = false; + } WARN_ON(crtc->active); crtc->base.enabled = false; @@ -11519,16 +11934,25 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc) encoder->base.crtc = NULL; } } - if (crtc->active) { + + if (crtc->active || IS_VALLEYVIEW(dev) || INTEL_INFO(dev)->gen < 5) { /* * We start out with underrun reporting disabled to avoid races. * For correct bookkeeping mark this on active crtcs. * + * Also on gmch platforms we dont have any hardware bits to + * disable the underrun reporting. Which means we need to start + * out with underrun reporting disabled also on inactive pipes, + * since otherwise we'll complain about the garbage we read when + * e.g. coming up after runtime pm. + * * No protection against concurrent access is required - at * worst a fifo underrun happens which also sets this to false. */ crtc->cpu_fifo_underrun_disabled = true; crtc->pch_fifo_underrun_disabled = true; + + update_scanline_offset(crtc); } } @@ -11546,7 +11970,7 @@ static void intel_sanitize_encoder(struct intel_encoder *encoder) if (encoder->connectors_active && !has_active_crtc) { DRM_DEBUG_KMS("[ENCODER:%d:%s] has active connectors but no active pipe!\n", encoder->base.base.id, - drm_get_encoder_name(&encoder->base)); + encoder->base.name); /* Connector is active, but has no active pipe. This is * fallout from our resume register restoring. Disable @@ -11554,9 +11978,11 @@ static void intel_sanitize_encoder(struct intel_encoder *encoder) if (encoder->base.crtc) { DRM_DEBUG_KMS("[ENCODER:%d:%s] manually disabled\n", encoder->base.base.id, - drm_get_encoder_name(&encoder->base)); + encoder->base.name); encoder->disable(encoder); } + encoder->base.crtc = NULL; + encoder->connectors_active = false; /* Inconsistent output/port/pipe state happens presumably due to * a bug in one of the get_hw_state functions. Or someplace else @@ -11567,8 +11993,8 @@ static void intel_sanitize_encoder(struct intel_encoder *encoder) base.head) { if (connector->encoder != encoder) continue; - - intel_connector_break_all_links(connector); + connector->base.dpms = DRM_MODE_DPMS_OFF; + connector->base.encoder = NULL; } } /* Enabled encoders without active connectors will be fixed in @@ -11603,6 +12029,16 @@ void i915_redisable_vga(struct drm_device *dev) i915_redisable_vga_power_on(dev); } +static bool primary_get_hw_state(struct intel_crtc *crtc) +{ + struct drm_i915_private *dev_priv = crtc->base.dev->dev_private; + + if (!crtc->active) + return false; + + return I915_READ(DSPCNTR(crtc->plane)) & DISPLAY_PLANE_ENABLE; +} + static void intel_modeset_readout_hw_state(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -11612,15 +12048,16 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev) struct intel_connector *connector; int i; - list_for_each_entry(crtc, &dev->mode_config.crtc_list, - base.head) { + for_each_intel_crtc(dev, crtc) { memset(&crtc->config, 0, sizeof(crtc->config)); + crtc->config.quirks |= PIPE_CONFIG_QUIRK_INHERITED_MODE; + crtc->active = dev_priv->display.get_pipe_config(crtc, &crtc->config); crtc->base.enabled = crtc->active; - crtc->primary_enabled = crtc->active; + crtc->primary_enabled = primary_get_hw_state(crtc); DRM_DEBUG_KMS("[CRTC:%d] hw state readout: %s\n", crtc->base.base.id, @@ -11636,8 +12073,7 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev) pll->on = pll->get_hw_state(dev_priv, pll, &pll->hw_state); pll->active = 0; - list_for_each_entry(crtc, &dev->mode_config.crtc_list, - base.head) { + for_each_intel_crtc(dev, crtc) { if (crtc->active && intel_crtc_to_shared_dpll(crtc) == pll) pll->active++; } @@ -11662,7 +12098,7 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev) encoder->connectors_active = false; DRM_DEBUG_KMS("[ENCODER:%d:%s] hw state readout: %s, pipe %c\n", encoder->base.base.id, - drm_get_encoder_name(&encoder->base), + encoder->base.name, encoder->base.crtc ? "enabled" : "disabled", pipe_name(pipe)); } @@ -11679,7 +12115,7 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev) } DRM_DEBUG_KMS("[CONNECTOR:%d:%s] hw state readout: %s\n", connector->base.base.id, - drm_get_connector_name(&connector->base), + connector->base.name, connector->base.encoder ? "enabled" : "disabled"); } } @@ -11702,8 +12138,7 @@ void intel_modeset_setup_hw_state(struct drm_device *dev, * Note that this could go away if we move to using crtc_config * checking everywhere. */ - list_for_each_entry(crtc, &dev->mode_config.crtc_list, - base.head) { + for_each_intel_crtc(dev, crtc) { if (crtc->active && i915.fastboot) { intel_mode_from_pipe_config(&crtc->base.mode, &crtc->config); DRM_DEBUG_KMS("[CRTC:%d] found active mode: ", @@ -11779,7 +12214,7 @@ void intel_modeset_gem_init(struct drm_device *dev) * for this. */ mutex_lock(&dev->struct_mutex); - list_for_each_entry(c, &dev->mode_config.crtc_list, head) { + for_each_crtc(dev, c) { if (!c->primary->fb) continue; @@ -11825,7 +12260,7 @@ void intel_modeset_cleanup(struct drm_device *dev) intel_unregister_dsm_handler(); - list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + for_each_crtc(dev, crtc) { /* Skip inactive CRTCs */ if (!crtc->primary->fb) continue; @@ -11923,6 +12358,7 @@ struct intel_display_error_state { struct intel_pipe_error_state { bool power_domain_on; u32 source; + u32 stat; } pipe[I915_MAX_PIPES]; struct intel_plane_error_state { @@ -11980,15 +12416,9 @@ intel_display_capture_error_state(struct drm_device *dev) if (!error->pipe[i].power_domain_on) continue; - if (INTEL_INFO(dev)->gen <= 6 || IS_VALLEYVIEW(dev)) { - error->cursor[i].control = I915_READ(CURCNTR(i)); - error->cursor[i].position = I915_READ(CURPOS(i)); - error->cursor[i].base = I915_READ(CURBASE(i)); - } else { - error->cursor[i].control = I915_READ(CURCNTR_IVB(i)); - error->cursor[i].position = I915_READ(CURPOS_IVB(i)); - error->cursor[i].base = I915_READ(CURBASE_IVB(i)); - } + error->cursor[i].control = I915_READ(CURCNTR(i)); + error->cursor[i].position = I915_READ(CURPOS(i)); + error->cursor[i].base = I915_READ(CURBASE(i)); error->plane[i].control = I915_READ(DSPCNTR(i)); error->plane[i].stride = I915_READ(DSPSTRIDE(i)); @@ -12004,6 +12434,9 @@ intel_display_capture_error_state(struct drm_device *dev) } error->pipe[i].source = I915_READ(PIPESRC(i)); + + if (!HAS_PCH_SPLIT(dev)) + error->pipe[i].stat = I915_READ(PIPESTAT(i)); } error->num_transcoders = INTEL_INFO(dev)->num_pipes; @@ -12054,6 +12487,7 @@ intel_display_print_error_state(struct drm_i915_error_state_buf *m, err_printf(m, " Power: %s\n", error->pipe[i].power_domain_on ? "on" : "off"); err_printf(m, " SRC: %08x\n", error->pipe[i].source); + err_printf(m, " STAT: %08x\n", error->pipe[i].stat); err_printf(m, "Plane [%d]:\n", i); err_printf(m, " CNTR: %08x\n", error->plane[i].control); |